Stahlin Non-Metallic Enclosures Product Catalog SE-300
Stahlin Non-Metallic Enclosures Product Catalog SE-300
Stahlin Non-Metallic Enclosures Product Catalog SE-300
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
GENERALINFORMATIONTable of ContentsIntroduction & General Information 1 - 10DiamondShield Series 11 - 58Classic SeriesCL 59 - 82CLW 83 - 106J SeriesJ 107 - 126JW 127 - 146JCC 147 - 166RJ 167 - 186RJW 187 - 206FatBoy - SSH 207 - 210TeleControl ® 211 - 212DuraBoxx Series 213 - 222Small Junction Series 223 - 230New Sentry Series 231 - 236Pushbutton Series 237 - 246N SeriesType 4X 247 - 262Type 12 263 - 268Type 3R 269 - 278Control Tower ® 279 - 284Dual Access 285 - 288Disconnects 289 - <strong>300</strong>Control Circuit Breaker <strong>Enclosures</strong> 301 - 306Combination Starters 307 - 308Trough & Wireway 309 - 314ModRight ® 315 - 322Accessories 323 - 340Technical Information 341 - 376Appendix, Glossary & Part number Index 377 - 384<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
GENERALINFORMATIONGeneral InformationApplicationThe products in this catalog are designed for electrical andelectronic enclosure applications in commercial or industriallocations that are classified as non-hazardous. Information on theclassification of hazardous and non-hazardous locations appearsat the end of this section.The enclosure products in this publication should be applied,installed and used only by qualified engineers, technicians orelectricians knowledgeable of the standards, laws, regulationsand ordinances associated with the respective application. Theinformation in this section has been condensed from severalreferences and is provided for guidance in selecting theappropriate enclosure for an application. The original referencemust be consulted for detailed information.Industry StandardsThe following information is provided with permission of therespective organizations to assist in the selection of an enclosure:Enclosure RatingsCSA, IEC, NEMA and UL use rating classifications that establishperformance requirements for enclosures. CSA, NEMA and ULare the recognized organizations and standards in North America,while IEC standards fulfill a similar function in Europe and otherparts of the world.In North America, both UL and CSA are accredited by theStandard Council of Canada (SCC) as certification organizationsand testing organizations. With its SCC accreditation, UL is ableto evaluate products for use in Canada. Approved products carryCUL mark. Both UL (CUL) and CSA perform follow-up services toassure that manufacturers continue to comply with material andprocess specifications.The CE Mark signifies that a product complies with all EuropeanUnion directives and applicable health, safety, environmental andconsumer protection standards. The mark promotes free tradeinto and within the EU. The CE mark is not applied to emptyenclosures because they are considered inactive parts of the finalequipment assembly. The equipment integrator is responsible forcompliance with EU directives and standards.The IEC rating system uses different evaluation criteria with moreclassifications than the UL and CSA standards. Because theclassification ratings differ, equating IEC classifications withNEMA Type ratings can be controversial and depends onindividual interpretation of ratings.GeneralInformationNEMA publishes a standard for ratings and testing, but does nottest or list enclosures. The NEMA enclosure ratings are thestandard reference for enclosures in this publication, andregardless of type, all enclosures provide protection to personnelagainst incidental contact with the enclosed equipment. To assistin the proper selection of an enclosure, the NEMA types aredifferentiated by the environmental conditions as listed below:NEMA 1NEMA 3NEMA 3RNEMA 4NEMA 4XNEMA 6NEMA 6PIndoor use to provide a degree of protectionagainst falling dirt.Indoor or outdoor use to provide a degree ofprotection against falling dirt, rain, sleet, snowand windblown dust; and that will be undamagedby the external formation of ice on the enclosure.Indoor or outdoor use to provide a degree ofprotection against falling dirt, rain, sleet andsnow; and that will be undamaged by theexternal formation of ice on the enclosure.Indoor or outdoor use to provide a degree ofprotection against falling dirt, rain, sleet, snow,windblown dust, splashing water, hose-directedwater; and that will be undamaged by theexternal formation of ice on the enclosure.Indoor or outdoor use to provide a degree ofprotection against falling dirt, rain, sleet, snow,windblown dust, splashing water, hose-directedwater and corrosion; and that will be undamagedby the external formation of ice on the enclosure.Indoor or outdoor use to provide a degree ofprotection against falling dirt; hose-directed waterand the entry of water during occasionaltemporary submersion at a limited depth; and willbe undamaged by the external formation of iceon the enclosure.Indoor or outdoor use to provide a degree ofprotection against falling dirt; hose-directedwater and the entry of water during prolongedsubmersion at a limited depth; and will beundamaged by the external formation of ice onthe enclosure.3<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
GENERALINFORMATIONGeneral InformationNEMA 12NEMA 13Indoor use to provide a degree of protectionagainst falling dirt; circulating dust, lint, fibers andflyings; and dripping and light splashing of liquids.Indoor use to provide a degree of protectionagainst falling dirt; circulating dust, lint, fibers andflyings; and spraying, splashing and seepage ofwater, oil and non-corrosive coolants.Reference Documents and SourcesNEMA Standards Publication 250, <strong>Enclosures</strong> for Electrical Equipment (1000 VoltsMaximum) and NEMA Standards Publication ICS6, <strong>Enclosures</strong> for IndustrialControls and Systems.National Electrical Manufacturers Association1<strong>300</strong> North 17th ST, Suite 1847Rosslyn, VA 22209CSA Standard C22.2 No. 14 Industrial Control Equipment for Use in Ordinary(<strong>Non</strong>-Hazardous) Locations; CSA Standard C22.2 No. 40 Cut-Out, Junction andPull Boxes; and CSA Standard 22.2 No. 94 Special Purpose <strong>Enclosures</strong>Canadian Standards Association178 Rexdale Blvd.Etobicoke, Ontario, Canada M9W 1R3continued on following pagesUL 50 <strong>Enclosures</strong> for Electrical Equipment; UL 94 Tests for Flammability ofPlastic Materials for Parts in Devices and Appliances; UL 508 Industrial ControlEquipment; UL 870 Wireways, Auxiliary Gutters and Associated Fittings; andUL 746C Polymeric Materials - Use in Electrical Equipment EvaluationsUnderwriters Laboratories333 Pfingsten RoadNorthbrook, IL 60062-2096Underwriters Laboratories of Canada7 Crouse RoadScarborough, Ontario, Canada M1R 3A9IEC 529 Classification of Degrees of Protection Provided by <strong>Enclosures</strong>IEC 204 Electrical Equipment of Industrial MachinesInternational Electrotechnical Commission1 Rue de VarembeiCH-1211Geneva 20, SwitzerlandANSI Z55.1 Gray Finishes for Industrial Apparatus and EquipmentAmerican National Standards Institute1430 BroadwayNew York, NY 10018Comparison of Enclosure Types for <strong>Non</strong>-hazardous LocationsProvides a Degree of Protection Against theType of EnclosureFollowing Environmental Conditions1 3 3R 4 4X 6 6P 12 13Incidental Contact with Enclosed Equipment Indoor• • •Outdoor Falling Dirt• Dripping and Light Splashing Liquids • •Rain, Sleet*, Snow • Circulating Dust, Lint, Fibers and Flyings Settling Dust, Lint, Fibers and Flyings • •External Ice*• • Hosedown and Splashing Water• • • •Oil and Coolant Seepage• Oil and Coolant Spraying and Splashing•Corrosive Agents• Occasional Temporary Submersion• Occasional Prolonged Submersion•*External operating mechanisms are not required to be operable when the enclosure is ice covered<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com4
GENERALINFORMATIONGeneral Information - IP Codecontinued on following pagesWhat valid usage exists for IP Codes in North America?NEMA 250 is a product standard that addresses many aspects of enclosure design and performance requirements; IEC 60529addresses only the degree of enclosure protection provided. As such an IP Code can only be used to supplement the NEMA Typedesignation; it cannot necessarily be used instead of a required NEMA Type designation.Two examples illustrate this point:Example #1: An enclosure meets all the requirements for a NEMA Type 4X rating and can be marked by and appropriate label. If theenclosure additionally meets the requirements for IP 56, it is appropriate to claim IP 56 compliance for the enclosure.Example #2: If a compartment within a NEMA Type 1 rating has been evaluated for compliance with the "finger protection"requirements of IEC 60529, it would be appropriate to claim IP 20 compliance for that compartment in addition to the NEMA Type 1designation for the overall enclosure.First NumberProtection against solid objects.0No ProtectionSecond NumberProtection against liquids.0No ProtectionThird NumberProtection against mechanical impacts.0No Protection1Protected against solidobjects up to 50 mm e.g.accidental touch byhands.1Protected againstvertically falling dropsof water.1150 g15 cmImpact 0.225 joule2Protected against solidobjects over 12 mm. e.g.fingers.2Protected againstdirect sprays of waterup to 15˚ from thevertical.2250 g15 cmImpact 0.375 joule3Protected against solidobjects over 2.5 mm.e.g. fingers.(tools and small wires)Protected against solid4 objects over 1 mm.e.g. fingers.(tools and small wires)34Protected againstsprays to 60˚ fromthe vertical.Protected againstwater sprayed from alldirections – limitedingress permitted.3250 g20 cmImpact 0.05 joule5Protected against dust –limited ingress permitted(no harmful deposits.)5Protected against lowpressure jets of waterfrom all directions –limited ingresspermitted.5500 g40 cmImpact 2.0 joule6Totally protectedagainst dust.1 m15 cm min.67Protected againststrong jets of water e.g.for us on ship decks –limited ingresspermitted.Protected against theeffects of immersionbetween 15 cm and 1 m.71.5 kg40 cmImpact 6.0 joule1 m8Protected against longperiods of immersionunder water.95 kg40 cmImpact 20.0 joule<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com6
GENERALINFORMATIONGeneral InformationGeneralInformationInformation for Comparison of IEC andCSA/NEMA/UL/CUL RatingsNEMA 250 and UL 50 specify requirements and tests for thedegree of protection against entry as well as environmentalconditions such as falling dirt, ice, corrosion, oil and coolantswhereas IEC 529 does not have such requirements. Differentrating requirements make comparison difficult and disagreementsare common.The IEC designation consists of the letters IP followed by twonumerals. The first number indicates the degree of protectionprovided by the enclosure with respect to persons and solidforeign objects entering the enclosure. The second numberindicates the degree of protection provided by the enclosure withrespect to the harmful ingress of water.Caution is necessary when attempting to equateIEC and NEMA enclosure ratings because an exactequivalence is not possible.The data contained in the following table is provided forinformation and this table must only be used to apply NEMAratings to IEC designators; it should not be used inversely.The cross-reference is based on engineering judgment and isnot approved by the standards organizations.Specifications for <strong>Stahlin</strong> FiberglassEnclosure Back Panel ConstructionMaterialsFiberglass<strong>Enclosures</strong> are molded under heat and pressure with fiberglassreinforced polyester resin to produce superior chemical resistancein corrosive applications. The glass fiber reinforcement increasesenclosure strength to withstand physical loads such asunexpected impacts or additional tensile loads.Carbon SteelA low carbon, rolled steel produced by passing bar stock througha set of rolls.IPFirstCharacterIPOIP1IP2IP3IP4IP5IP6Assignment of IP Designations to NEMA Type Enclosure RatingsNEMA Enclosure Type1 2 3 3R 3S 4 4X 5 6 6P 12 12K 13A B A B A B A B A B A B A B A B A B A B A B A B A BIPSecondCharacter1PO IPO2P1 IP11P2 IP21P3 IP31P4 IP41P5 IP51P6 IP6IP7IP8A = A shaded block in the “A” column indicates that the NEMA Enclosure Type exceeds the requirements for the respective IEC 60529 IP First CharacterDesignation. The IP First Character Designation is the protection against access to hazardous parts and solid foreign objects.B = A shaded block in the “B” column indicates that the NEMA Enclosure Type exceeds the requirements for the respective IEC 60529 IP Second CharacterDesignation. The IP Second Character Designation is the protection against the ingress of water.7<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
GENERALINFORMATIONGeneral InformationStainless SteelA highly corrosion resistant iron alloy containing between 12%and 25% chromium. The addition of nickel produces theStainless Steel <strong>300</strong>0 series. For superior corrosion resistance<strong>Stahlin</strong> utilizes both Type 304 and 316L Stainless Steel, whichare non-magnetic. Type 316L, a low carbon Stainless steel, isharder and more corrosion resistant and is an excellent materialfor marine applications.AluminumA lightweight metal that quickly forms a natural oxide layer toresist corrosion. <strong>Stahlin</strong> fabricates back panels from Type 5052Aluminum, the highest strength non-heat treatable aluminum alloyrecommended for marine applications.Enclosure Selection GuidelinesThe enclosure selection process includes the following fiveconsiderations:1. Examination of the ApplicationIndustrial applications usually require strong and durable mechanicalenclosures. Electronic and communication applications aremore diverse, but space and security are usually more dominantconsiderations.2. Environmental ProtectionThe environment where the equipment will be located (i.e.outdoors,factory floor, office, laboratory, chemical plant, etc.) establishes thedegree of protection required. The NEMA enclosure ratings providethe information needed to select an enclosure rating.The application environment is also a significant factor in specifyingthe enclosure material. Fiberglass is usually consideredfor more corrosive applications. Electromagnetic interference(EMI) and radio frequency interference (RFI) are additional environmentalfactors, which impact enclosure material selectionand specification.continued on following pages4. Climate ControlIn electronic enclosure applications heat dissipation may be animportant issue because technology advances continue to reducecomponent size. Smaller components increase heat generation byplacing more components in the same enclosure volume. In someapplications heaters may be required to prevent condensation.5. SecurityThe monetary value of equipment placed within enclosures hasincreased. Unauthorized access and operation of equipment canjeopardize the safety of personnel. Enclosure security can beenhanced by the selection of hinges, latches, locks and fasteners.The five steps in the enclosure selection process are not new, butnumerous design options are available to meet a diversity ofneeds in each area. In addition many enclosures in this catalogcan be modified to meet unique application requirements in aspecific environment.Selecting an EnclosureThe Selection Guidelines and the Enclosure Selection Guide aredesigned to help select a <strong>Stahlin</strong> Enclosure that is best suited foryour application. Before using the Enclosure Selection Guide, thefirst three steps in the selection process must be completed. Theapplication, environmental and space requirements depend on thesensitivity and criticality of the equipment, its size, and operation.Once these parameters are established the first three steps arequickly and easily completed. An Enclosure Selection Checklistand supplemental information are provided in the TechnicalSection to help select the enclosure. Chemical resistance,equipment weight capacities and other helpful design informationare also included in the Technical Section.The Technical Section contains information to determine the needfor climate control in fiberglass enclosures and aids for specifyingclimate control when it is required. Information on fasteners,latches and locks for security is found in the AccessoriesSection.3. Space RequirementsSpace requirements include size and equipment arrangement aswell as aesthetics. Accessory items such as windows, back panels,swingout panels, wiring terminals, EMI/RFI shielding and thermalcontrol equipment also influence size and appearance.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com8
GENERALINFORMATIONGeneral InformationInstallation<strong>Enclosures</strong> must be mounted to structures that support the weightand sustain all other forces that the enclosure and its associatedequipment may impose. Before any circuits are energized, allelectrical and mechanical clearances must be checked to confirmthat the equipment functions safely and properly. Assemblers andinstallers should consult with manufacturers and observe allregulatory procedures and practices to assure electrical andmechanical conformance in each application.Classification of Hazardous AtmospheresThe NEC classifies areas according to the nature, likelihood andextent of ignitable flammable hazards that could exist whereelectrical equipment is installed. The intent of area classificationis to prevent fires and explosions that could be caused byelectrical equipment serving as an ignition source (arc, spark,high temperature, etc.).The NEC divides the atmospheric explosion hazards into threeclasses. Considerable skill and judgment must be applied whenGeneralInformationdeciding to what degree an area contains hazardousconcentrations of vapors, combustible dusts or ignitable fibersand flyings. Factors such as temperature, barometric pressure,humidity, ventilation, quantity of release, distance from the source,etc. must all be evaluated.An abbreviated summary of the NEC classifications appears inthe table below. For detailed information on specificatmospheres, refer to the NEC, Articles 501-505 and 511-517.For a more complete list of flammable liquids, gases and solids;refer to NFPA 497A and NFPA 497B, Classification of Gases,Vapors and Dusts for Electrical Equipment in Hazardous(Classified) Locations.IEC methodology was added to the 1996 NEC in Article 505. TheIEC uses area classifications similar to the NEC, but with differentterms, groupings, descriptors and temperature range. Article 505defines only Class I areas; however, the divisions and groupingsare different as shown in the following tables:SUMMARY OF HAZARDOUS ATMOSPHERESClass Division Group Typical Atmosphere, IgnitionTemperaturesI 1 Normally hazardous A Acetylene, 305°C (581°F)Flammable Gases, Vapors B Hydrogen, 520°C (968°F)Flammable and Combustible C Ethylene, 450°C (842°F)Liquids D Methane, 630°C (999°F)2 Not normally hazardous A Same as Division 1B Same as Division 1C Same as Division 1D Same as Division 1II 1 Normally hazardous E Combustible metal dusts, or otherCombustible Dustscombustible dusts of similarhazardous characteristicsF Combustible carbonaceous dustsG Combustible dusts not included inGroup E or F, includes flour,grain, wood, plastic & chemicals2 Not normally hazardous F Same as Division 1G Same as Division 1III 1 & 2 NoIgnitable fibers and flyingsGroups9<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
GENERALINFORMATIONGeneral InformationIEC Group I is for underground mines and is not covered by theNEC. Group IIC combines NEC Groups A and B making therequirements for acetylene the same as for hydrogen and otherhighly flammable gases. The IEC divides NEC Division 1 intoZone 0 and Zone 1. In Zone 0 the hazard is present at all timesor for long periods of time. In Zone 1 the hazard is present duringnormal conditions, including repair and maintenance activities orleakage, or where operations or processes could result in therelease of a flammable mixture or cause a simultaneous failure ofelectrical equipment.The IEC divides NEC Division 1 in two parts, IEC Zone 0 andZone 1. The definition is essentially the same as NEC Division 1,except that the most dangerous application, Zone 0, has beenseparated. This separation allows IEC Zone 1 use with lessermeans in NEC Division 1, which also covers Zone 0.NEMA 9NEMA 10continued on following pages<strong>Enclosures</strong> constructed for indoor use in hazardouslocations classified as Class II, Division1, Groups E, F or G as defined in NFPA 70.<strong>Enclosures</strong> constructed to meet the requirementsof the Mine Safety and HealthAdministration, 30 C. F. R., Part 18.National Electrical Code (NEC)Articles 501-505 and 511-517.National Fire Protection Association (NFPA)Batterymarch ParkQuincy, MA 02269CAUTION:These methodologies are mutually exclusive andshould not be mixed and matched. Equipmentapproved for the NEC classifications may beused in the equivalent IEC area, but not viceversa. NEC Article 500-3 requires that the areaclassification, wiring and equipment selection beunder the supervision of a qualified RegisteredProfessional Engineer.COMPARISON OF DIVISIONS WITH ZONESNEC DivisionIEC Zone1 01 12 2<strong>Non</strong>-hazardous<strong>Non</strong>-hazardousEnclosure ratings for hazardous locations include:NEMA 7NEMA 8<strong>Enclosures</strong> constructed for indoor use in hazardouslocations classified as Class I, Division 1,Groups A, B, C or D as defined in NFPA 70.<strong>Enclosures</strong> constructed for either indoor or outdooruse in hazardous locations classified asClass I, Division 1, Groups A, B, C and D asdefined in NFPA 70.COMPARISON OF GROUPSNEC GroupIEC GroupAIICBIICCIIBDIIA<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com10
DIAMONDSHIELD<strong>SE</strong>RIESThe DiamondShield Series DSThe DiamondShield SeriesThe <strong>Stahlin</strong> Diamondshield Series was developed for design flexibility and pleasing aesthetics.Applications include high- end electronics, harsh corrosive environments, and industrial applications bothindoors and out. Unique internal panel management capabilities provides the end user with only thefeatures they need for their application, yet able to use every cubic inch of valuable internal enclosurespace. The series offers an additional feature of panel mounting in the cover for use as an operatorinterface in industrial equipment control stations when required.Featured Highlights“DiamondShield” Seamless Polyurethane GasketHiddenHingeThe DiamondShield Series Attributes● Scratch and abrasion resistant acrylic window● Flush window bonded on cover● Maximum visibility to raised panels andcontrol devices● High temperature, flame retardant, non corrosive,environmental designsEconomicalUV ResistantSolarGuard ThermosetComposite FiberglassSolid ConstructionIndustrial ToughPleasing AestheticsFlush Fitting Cover5 Cover SecurementMethodsThe DiamondShield Series Specifications●Water tight●Light weight●UL/cUL approved●Corrosion resistant● Rated NEMA 1, 3, 4X, 12●CSA approved●Fire resistant●IEC 60529 IP66LISTEDLISTEDThe DiamondShield Series is Applicable for Many Industries including:OEM & custom designs MRO facilities Manufacturing facilities Pump Control Systems
DIAMONDSHIELD<strong>SE</strong>RIESThe DiamondShield Series●●Ten basic sizesFive configurations(W, HW, HLL, HPL, FHL)
DIAMONDSHIELD<strong>SE</strong>RIESDiamondShield SeriesDSThe <strong>Stahlin</strong> Diamondshield Serieswas developed for designflexibility and pleasing aesthetics.Applications include high-endelectronics, harsh corrosiveenvironments, and industrialapplications both indoors andout. Unique internal panelmanagement capabilitiesprovides the end user withonly the features they needfor their application, yetable to use every cubicinch of valuable internalenclosure space. The seriesoffers an additional featureof panel mounting in the coverfor use as an operator interface in industrial equipment control stationswhen required.DiamondShield Series Ordering InformationUse the information below to derive specific catalog numbers.<strong>Stahlin</strong> catalog numbers first begin with Family ID, then size ID andconfiguration ID as a suffix. See the example below.Ordering Information - Deriving <strong>Catalog</strong> NumbersCvr Prefix Size ID Latching Suffix EXAMPLEDS 60604 Latching Suffix = W “DS60604W”DiamondShield Series - Inside DimensionsSize ID H x W x D Optional Panel #DS60604 7.41 x 7.79 x 4.31 BP66DS80604 9.41 x 7.79 x 4.31 BP86DS80804 9.39 x 9.76 x 4.31 BP88DS100806 11.42 x 9.79 x 6.31 BP1008DS121006 13.45 x 11.83 x 6.31 BP1210DS141206 15.49 x 13.86 x 6.34 BP1412DS141208 15.49 x 13.86 x 8.34 BP1412DS161408 17.58 x 15.96 x 8.34 BP1614DS181610 19.77 x 18.15 x 10.34 BP1816DS201610 21.79 x 18.16 x 10.34 BPJ2016Optional back panels available in various materials. Details on the following pages.DiamondShield Series - ConfigurationsConfigurationID DESCRIPTIONW 4 cover screws, lift off cover configurationHW Hinged, 2 cover screws configurationHLL Hinged, link lock latch configurationHPL Hinged, padlock latch configurationFHL Hinged, 2 fiberglass/stainless steel bail wire latch configurationDiamondShield Series Shared CharacteristicsConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignPhysical Characteristics<strong>Non</strong> CorrosiveWater-tight/Dust-tightImpact Resistant<strong>Non</strong> ConductiveLight WeightUV ResistantWorkable MaterialEasy MaintenancePleasing AestheticsColor/FinishIndustry StandardsHot compression molded fiberglassreinforced polyester (thermoset)Poured polyurethane seamlessgasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless steel used onall external hardwarePanel mounting capability foroptional fixed rear panelAll bosses utilize threaded brassinserts accepting 10-32 screwsRounded edges, minimalprotrusions or exposed pocket areasfor assembly of dust and debrisStands up to an exceptionally broadrange of chemical exposuresResults in an environmentallysealed, environmentally sound spaceResilient material with high impactresistanceDouble insulated material.No incidental electrical contactSolid construction in a lightweightdesignMinimizes the affects of sunlightCuts, drills, punches, and saws withease and accuracyScratches and gouges can be restoredwith a petroleum jelly productSmooth lines, soft colors easily blendinto customer’s design conceptsSmooth surface, no color variations,swirls, or color pockets, no voids.Color is Glacier GrayUL/cUL 50File E64358Type 1, 3, 3s, 12, 13, 4XNEMA 250Type 1, 3, 3s, 12, 13, 4XCSA Std C22.2File LR069014Type 1, 3, 3s, 12, 13, 4XIEC 60529IP66Temperature Range(-40°F to +250°F) (-40°C to 130°C)Flammability RatingUL94-5VSelf extinguishing<strong>Non</strong>-Halogenated,<strong>Non</strong>-flame propagatingChemical ResistanceFull chemical resistance chartslisted in appendixNFPA No. 101 Flame Spread Class A (1)13<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Opaque Cover Series ConfigurationsW4 cover screws, lift off coverDesign Features● Interchangeable Covers &Hardware● Panel Management System● Clean, Contemporary Look● No Penetrating Hardware● Lift Off Cover Design,4 Cover Screws● Cover Panel● Unobstructed Walls● Formed in placeUrethane GasketDS80604WDIAMONDSHIELD<strong>SE</strong>RIESHWHinged, 2 cover screwsDesign Features● Interchangeable Covers &Hardware● Panel Management System● Clean, Contemporary Look● No Penetrating Hardware● Full 180 degree Door Opening● Cover Panel● Unobstructed Walls● Formed in placeUrethane Gasket● Hinged Cover, 2 Cover ScrewsDS141206HWHLLHinged, 2 link lock latchesDesign Features● Interchangeable Covers &Hardware● Panel Management System● Clean, Contemporary Look● No Penetrating Hardware● Full 180 degree Door Opening● Cover Panel● Unobstructed Walls● Formed in placeUrethane Gasket● Hinged Cover, Link Lock LatchFor Quick EntryDS141206HLLHPLHinged, 2 pull latchesDesign Features● Interchangeable Covers &Hardware● Panel Management System● Clean, Contemporary Look● No Penetrating Hardware● Full 180 degree Door Opening● Cover Panel● Unobstructed Walls● Formed in placeUrethane Gasket● Hinged Cover, Quick ReleasePull LatchDS141206HPLFHLHinged, 2 fiberglass/stainless steel bail wire latchesDesign Features● Interchangeable Covers &Hardware● Panel Management System● Clean, Contemporary Look● No Penetrating Hardware● Full 180 degree Door Opening● Cover Panel● Unobstructed Walls● Formed in placeUrethane Gasket● Hinged Cover, Bale Wire Latch,<strong>Non</strong>-<strong>Metallic</strong>DS141206FHL<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com14
DIAMONDSHIELD<strong>SE</strong>RIESWTechnical Specifications - DiamondShield Series“W” configuration - 4 cover screws, lift off coverDSDS141206WNOTES:WWWConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignIndustry StandardsAccessoriesBack PanelsHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisUL/cUL 50File E64358 Type 1, 3, 3s, 12, 13, 4XNEMA 250Type 1, 3, 3s, 12, 13, 4XCSA Std C22.2File LR069014 Type 1, 3, 3s, 12, 13, 4XTemperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-Halogenated, <strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixNFPA No. 101 Flame Spread Class A (1)ORDERING INFOAluminum BP__AL pg. 330Fiberglass BP__FG pg. 330Stainless Steel BP__SS pg. 330Carbon Steel BP__CS pg. 330Mounting FeetMounting feetORDERING INFOSee the following DiamondShield accessories pagesSpecial AccessoriesVent DVK3KIT pg. 324Louver LPK3KIT pg. 324Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 326Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 327WModifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels See the following DiamondShield accessories pagesGrounding stud pg. 338, 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32215<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Opaque Cover Series “W” Configuration Technical DrawingsDIAMONDSHIELD<strong>SE</strong>RIESDiamondShield Opaque Cover Series <strong>Enclosures</strong> - “W” Configuration DimensionsSIZE ID OVERALL INSIDE MOUNTING OPT. MOUNT. PANELNUMBER H X W X D A X B X C P X R K L S T FEET E X F N J M WEIGHT NUMBERDS60604W 7.41 x 7.79 x 4.31 6.77 x 6.77 x 4.06 5.93 x 4.00 4.25 4.25 3.60 .38 8.24 x 4.00 9.02 4.56 .25 2.5 lbs BP-66(188.3 x 197.9 x 109.5) (171.9 x 171.9 x 103.2) (150.6 x 101.6) (108) (108) (91.5) (9.6) (209.2 x 101.6) (229.0) (115.8) (6.35)DS80604W 9.41 x 7.79 x 4.31 8.77 x 6.77 x 4.06 7.91 x 4.00 6.25 4.25 3.60 .38 10.21 x 4.00 10.98 4.56 .25 3.0 lbs BP-86(239.1 x 197.9 x 109.5) (222.7 x 171.9 x 103.2) (200.9 x 101.6) (159) (108) (91.5) (9.6) (259.3 x 101.6) (279.0) (115.8) (6.35)DS80804W 9.39 x 9.76 x 4.31 8.74 x 8.74 x 4.06 7.91 x 6.00 6.25 6.25 3.60 .38 10.21 x 6.00 10.98 4.56 .25 3.5lbs BP-88(238.5 x 248.0 x 109.5) (222.1 x 222.1 x 103.2) (200.9 x 152.4) (159) (159) (91.5) (9.6) (259.3 x 152.4) (279.0) (6.35) (115.8)DS100806W 11.42 x 9.79 x 6.31 10.73 x 8.73 x 6.06 9.89 x 6.00 8.25 6.25 5.60 .38 12.19 x 6.00 12.96 6.56 .25 4.5 lbs BP-1008(290.1 x 248.6 x 160.3) (272.5 x 221.7 x 153.9) (251.2 x 152.4) (210) (159) (142.3) (9.6) (309.6 x 152.4) (329.3) (166.6) (6.35)DS121006W 13.45 x 11.83 x 6.31 12.69 x 10.69 x 6.06 11.88 x 8.00 10.25 8.25 5.60 .38 14.18 x 8.00 14.95 6.56 .25 6.0 lbs BP-1210(341.6 x <strong>300</strong>.5 x 160.3) (322.3 x 271.5 x 153.9) (301.7 x 203.2) (260) (210) (142.3) (9.6) (360.2 x 203.2) (379.7) (166.6) (6.35)DS141206W 15.49 x 13.86 x 6.34 14.72 x 12.72 x 6.06 13.91 x 10.00 12.25 10.25 5.60 .38 16.21 x 10.00 16.98 6.59 .25 8.0 lbs BP-1412(393.4 x 352.0 x 161.0) (373.9 x 323.1 x 153.9) (353.3 x 254.0) (311) (260) (142.3) (9.6) (411.7 x 254.0) (431.4) (167.4) (6.35)DS141208W 15.49 x 13.86 x 8.34 14.66 x 12.66 x 8.06 13.88 x 10.00 12.25 10.25 7.60 .38 16.19 x 10.00 16.96 8.59 .25 9.5 lbs BP-1412(393.4 x 352.0 x 211.8) (372.4 x 321.6 x 204.7) (352.5 x 254.0) (311) (260) (193.2) (9.6) (411.2 x 254.0) (430.9) (218.2) (6.35)DS161408W 17.58 x 15.96 x 8.34 16.69 x 14.69 x 8.06 15.96 x 12.00 14.25 12.25 7.60 .38 18.26 x 12.00 19.04 8.59 .25 11.5 lbs BP-1614(446.6 x 405.4 x 211.8) (424.0 x 373.1 x 204.7) (405.4 x 304.8) (362) (311) (193.2) (9.6) (464.0 x 304.8) (483.5) (218.2) (6.35)DS181610W 19.77 x 18.15 x 10.34 18.63 x 16.63 x 10.06 17.94 x 14.00 16.25 14.25 9.60 .38 20.24 x 14.00 21.02 10.59 .25 16.0 lbs BP-1816(502.2 x 461.0 x 262.6) (473.2 x 422.4 x 255.5) (455.6 x 355.6) (413) (362) (243.9) (9.6) (514.3 x 355.6) (533.8) (268.9) (6.35)DS201610W 21.79 x 18.16 x 10.34 20.63 x 16.63 x 10.06 19.96 x 14.00 18.25 14.25 9.59 .38 22.26 x 14.00 23.04 10.59 .25 17.5 lbs BP-J2016(553.5 x 4612 x 262.6) (524.0 x 422.4 x 255.5) (506.9 x 355.6) (463) (362) (243.7) (9.6) (565.6 x 355.6) (585.1) (268.9) (6.35)All measures are in inches, items in parentheses are in millimeters<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com16
DIAMONDSHIELD<strong>SE</strong>RIESHWTechnical Specifications - DiamondShield Series“HW” configuration - Hinged, 2 cover screwsDSDS141206HWNOTES:HWHWHWConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignIndustry StandardsAccessoriesBack PanelsHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisUL/cUL 50File E64358 Type 1, 3, 3s, 12, 13, 4XNEMA 250Type 1, 3, 3s, 12, 13, 4XCSA Std C22.2File LR069014 Type 1, 3, 3s, 12, 13, 4XTemperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-Halogenated, <strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixNFPA No. 101 Flame Spread Class A (1)ORDERING INFOAluminum BP__AL pg. 330Fiberglass BP__FG pg. 330Stainless Steel BP__SS pg. 330Carbon Steel BP__CS pg. 330Mounting FeetMounting feetORDERING INFOSee the following DiamondShield accessories pagesSpecial AccessoriesVent DVK3KIT pg. 324Louver LPK3KIT pg. 324Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 326Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 327HWModifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels See the following DiamondShield accessories pagesGrounding stud pg. 338, 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32217<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Opaque Cover Series “HW” Configuration Technical DrawingsDIAMONDSHIELD<strong>SE</strong>RIESDiamondShield Opaque Cover Series <strong>Enclosures</strong> - “HW” Configuration DimensionsSIZE ID OVERALL INSIDE MOUNTING OPT. MOUNT. PANELNUMBER H X W X D A X B X C P X R K L S T FEET E X F N J M WEIGHT NUMBERDS60604HW 7.41 x 7.79 x 4.31 6.77 x 6.77 x 4.06 5.93 x 4.00 4.25 4.25 3.60 .38 8.24 x 4.00 9.02 4.56 .25 2.5 lbs BP-66(188.3 x 197.9 x 109.5) (171.9 x 171.9 x 103.2) (150.6 x 101.6) (108) (108) (91.5) (9.6) (209.2 x 101.6) (229.0) (115.8) (6.35)DS80604HW 9.41 x 7.79 x 4.31 8.77 x 6.77 x 4.06 7.91 x 4.00 6.25 4.25 3.60 .38 10.21 x 4.00 10.98 4.56 .25 3.0 lbs BP-86(239.1 x 197.9 x 109.5) (222.7 x 171.9 x 103.2) (200.9 x 101.6) (159) (108) (91.5) (9.6) (259.3 x 101.6) (279.0) (115.8) (6.35)DS80804HW 9.39 x 9.76 x 4.31 8.74 x 8.74 x 4.06 7.91 x 6.00 6.25 6.25 3.60 .38 10.21 x 6.00 10.98 4.56 .25 3.5lbs BP-88(238.5 x 248.0 x 109.5) (222.1 x 222.1 x 103.2) (200.9 x 152.4) (159) (159) (91.5) (9.6) (259.3 x 152.4) (279.0) (6.35) (115.8)DS100806HW 11.42 x 9.79 x 6.31 10.73 x 8.73 x 6.06 9.89 x 6.00 8.25 6.25 5.60 .38 12.19 x 6.00 12.96 6.56 .25 4.5 lbs BP-1008(290.1 x 248.6 x 160.3) (272.5 x 221.7 x 153.9) (251.2 x 152.4) (210) (159) (142.3) (9.6) (309.6 x 152.4) (329.3) (166.6) (6.35)DS121006HW 13.45 x 11.83 x 6.31 12.69 x 10.69 x 6.06 11.88 x 8.00 10.25 8.25 5.60 .38 14.18 x 8.00 14.95 6.56 .25 6.0 lbs BP-1210(341.6 x <strong>300</strong>.5 x 160.3) (322.3 x 271.5 x 153.9) (301.7 x 203.2) (260) (210) (142.3) (9.6) (360.2 x 203.2) (379.7) (166.6) (6.35)DS141206HW 15.49 x 13.86 x 6.34 14.72 x 12.72 x 6.06 13.91 x 10.00 12.25 10.25 5.60 .38 16.21 x 10.00 16.98 6.59 .25 8.0 lbs BP-1412(393.4 x 352.0 x 161.0) (373.9 x 323.1 x 153.9) (353.3 x 254.0) (311) (260) (142.3) (9.6) (411.7 x 254.0) (431.4) (167.4) (6.35)DS141208HW 15.49 x 13.86 x 8.34 14.66 x 12.66 x 8.06 13.88 x 10.00 12.25 10.25 7.60 .38 16.19 x 10.00 16.96 8.59 .25 9.5 lbs BP-1412(393.4 x 352.0 x 211.8) (372.4 x 321.6 x 204.7) (352.5 x 254.0) (311) (260) (193.2) (9.6) (411.2 x 254.0) (430.9) (218.2) (6.35)DS161408HW 17.58 x 15.96 x 8.34 16.69 x 14.69 x 8.06 15.96 x 12.00 14.25 12.25 7.60 .38 18.26 x 12.00 19.04 8.59 .25 11.5 lbs BP-1614(446.6 x 405.4 x 211.8) (424.0 x 373.1 x 204.7) (405.4 x 304.8) (362) (311) (193.2) (9.6) (464.0 x 304.8) (483.5) (218.2) (6.35)DS181610HW 19.77 x 18.15 x 10.34 18.63 x 16.63 x 10.06 17.94 x 14.00 16.25 14.25 9.60 .38 20.24 x 14.00 21.02 10.59 .25 16.0 lbs BP-1816(502.2 x 461.0 x 262.6) (473.2 x 422.4 x 255.5) (455.6 x 355.6) (413) (362) (243.9) (9.6) (514.3 x 355.6) (533.8) (268.9) (6.35)DS201610HW 21.79 x 18.16 x 10.34 20.63 x 16.63 x 10.06 19.96 x 14.00 18.25 14.25 9.59 .38 22.26 x 14.00 23.04 10.59 .25 17.5 lbs BP-J2016(553.5 x 4612 x 262.6) (524.0 x 422.4 x 255.5) (506.9 x 355.6) (463) (362) (243.7) (9.6) (565.6 x 355.6) (585.1) (268.9) (6.35)All measures are in inches, items in parentheses are in millimeters<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com18
DIAMONDSHIELD<strong>SE</strong>RIESTechnical Specifications - DiamondShield SeriesHLL“HLL” configuration - Hinged, 2 link lock latchesDSDS141206HLLNOTES:HLLHLLHLLBack PanelsConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignIndustry StandardsAccessoriesHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisUL/cUL 50File E64358 Type 1, 3, 3s, 12, 13, 4XNEMA 250Type 1, 3, 3s, 12, 13, 4XCSA Std C22.2File LR069014 Type 1, 3, 3s, 12, 13, 4XTemperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-Halogenated, <strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixNFPA No. 101 Flame Spread Class A (1)ORDERING INFOAluminum BP__AL pg. 330Fiberglass BP__FG pg. 330Stainless Steel BP__SS pg. 330Carbon Steel BP__CS pg. 330Mounting FeetMounting feetORDERING INFOSee the following DiamondShield accessories pagesSpecial AccessoriesVent DVK3KIT pg. 324Louver LPK3KIT pg. 324Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 326Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 327HLLModifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels See the following DiamondShield accessories pagesGrounding stud pg. 338, 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32219<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Opaque Cover Series “HLL” Configuration Technical DrawingsDIAMONDSHIELD<strong>SE</strong>RIESDiamondShield Opaque Cover Series <strong>Enclosures</strong> - “HLL” Configuration DimensionsSIZE ID OVERALL INSIDE MOUNTING OPT. MOUNT. PANELNUMBER H X W X D A X B X C P X R K L S T FEET E X F N J M WEIGHT NUMBERDS60604HLL 7.41 x 7.79 x 4.31 6.77 x 6.77 x 4.06 5.93 x 4.00 4.25 4.25 3.60 .38 8.24 x 4.00 9.02 4.56 .25 2.5 lbs BP-66(188.3 x 197.9 x 109.5) (171.9 x 171.9 x 103.2) (150.6 x 101.6) (108) (108) (91.5) (9.6) (209.2 x 101.6) (229.0) (115.8) (6.35)DS80604HLL 9.41 x 7.79 x 4.31 8.77 x 6.77 x 4.06 7.91 x 4.00 6.25 4.25 3.60 .38 10.21 x 4.00 10.98 4.56 .25 3.0 lbs BP-86(239.1 x 197.9 x 109.5) (222.7 x 171.9 x 103.2) (200.9 x 101.6) (159) (108) (91.5) (9.6) (259.3 x 101.6) (279.0) (115.8) (6.35)DS80804HLL 9.39 x 9.76 x 4.31 8.74 x 8.74 x 4.06 7.91 x 6.00 6.25 6.25 3.60 .38 10.21 x 6.00 10.98 4.56 .25 3.5lbs BP-88(238.5 x 248.0 x 109.5) (222.1 x 222.1 x 103.2) (200.9 x 152.4) (159) (159) (91.5) (9.6) (259.3 x 152.4) (279.0) (6.35) (115.8)DS100806HLL 11.42 x 9.79 x 6.31 10.73 x 8.73 x 6.06 9.89 x 6.00 8.25 6.25 5.60 .38 12.19 x 6.00 12.96 6.56 .25 4.5 lbs BP-1008(290.1 x 248.6 x 160.3) (272.5 x 221.7 x 153.9) (251.2 x 152.4) (210) (159) (142.3) (9.6) (309.6 x 152.4) (329.3) (166.6) (6.35)DS121006HLL 13.45 x 11.83 x 6.31 12.69 x 10.69 x 6.06 11.88 x 8.00 10.25 8.25 5.60 .38 14.18 x 8.00 14.95 6.56 .25 6.0 lbs BP-1210(341.6 x <strong>300</strong>.5 x 160.3) (322.3 x 271.5 x 153.9) (301.7 x 203.2) (260) (210) (142.3) (9.6) (360.2 x 203.2) (379.7) (166.6) (6.35)DS141206HLL 15.49 x 13.86 x 6.34 14.72 x 12.72 x 6.06 13.91 x 10.00 12.25 10.25 5.60 .38 16.21 x 10.00 16.98 6.59 .25 8.0 lbs BP-1412(393.4 x 352.0 x 161.0) (373.9 x 323.1 x 153.9) (353.3 x 254.0) (311) (260) (142.3) (9.6) (411.7 x 254.0) (431.4) (167.4) (6.35)DS141208HLL 15.49 x 13.86 x 8.34 14.66 x 12.66 x 8.06 13.88 x 10.00 12.25 10.25 7.60 .38 16.19 x 10.00 16.96 8.59 .25 9.5 lbs BP-1412(393.4 x 352.0 x 211.8) (372.4 x 321.6 x 204.7) (352.5 x 254.0) (311) (260) (193.2) (9.6) (411.2 x 254.0) (430.9) (218.2) (6.35)DS161408HLL 17.58 x 15.96 x 8.34 16.69 x 14.69 x 8.06 15.96 x 12.00 14.25 12.25 7.60 .38 18.26 x 12.00 19.04 8.59 .25 11.5 lbs BP-1614(446.6 x 405.4 x 211.8) (424.0 x 373.1 x 204.7) (405.4 x 304.8) (362) (311) (193.2) (9.6) (464.0 x 304.8) (483.5) (218.2) (6.35)DS181610HLL 19.77 x 18.15 x 10.34 18.63 x 16.63 x 10.06 17.94 x 14.00 16.25 14.25 9.60 .38 20.24 x 14.00 21.02 10.59 .25 16.0 lbs BP-1816(502.2 x 461.0 x 262.6) (473.2 x 422.4 x 255.5) (455.6 x 355.6) (413) (362) (243.9) (9.6) (514.3 x 355.6) (533.8) (268.9) (6.35)DS201610HLL 21.79 x 18.16 x 10.34 20.63 x 16.63 x 10.06 19.96 x 14.00 18.25 14.25 9.59 .38 22.26 x 14.00 23.04 10.59 .25 17.5 lbs BP-J2016(553.5 x 4612 x 262.6) (524.0 x 422.4 x 255.5) (506.9 x 355.6) (463) (362) (243.7) (9.6) (565.6 x 355.6) (585.1) (268.9) (6.35)All measures are in inches, items in parentheses are in millimeters<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com20
DIAMONDSHIELD<strong>SE</strong>RIESTechnical Specifications - DiamondShield SeriesHPL“HPL” configuration - Hinged, 2 pull latchesDSDS141206HPLNOTES:HPLHPLHPLBack PanelsConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignIndustry StandardsAccessoriesHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisUL/cUL 50File E64358 Type 1, 3, 3s, 12, 13, 4XNEMA 250Type 1, 3, 3s, 12, 13, 4XCSA Std C22.2File LR069014 Type 1, 3, 3s, 12, 13, 4XTemperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-Halogenated, <strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixNFPA No. 101 Flame Spread Class A (1)ORDERING INFOAluminum BP__AL pg. 330Fiberglass BP__FG pg. 330Stainless Steel BP__SS pg. 330Carbon Steel BP__CS pg. 330Mounting FeetMounting feetORDERING INFOSee the following DiamondShield accessories pagesSpecial AccessoriesVent DVK3KIT pg. 324Louver LPK3KIT pg. 324Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 326Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 327HPLModifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels See the following DiamondShield accessories pagesGrounding stud pg. 338, 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32221<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Opaque Cover Series “HPL” Configuration Technical DrawingsDIAMONDSHIELD<strong>SE</strong>RIESDiamondShield Opaque Cover Series <strong>Enclosures</strong> - “HPL” Configuration DimensionsSIZE ID OVERALL INSIDE MOUNTING OPT. MOUNT. PANELNUMBER H X W X D A X B X C P X R K L S T FEET E X F N J M WEIGHT NUMBERDS60604HPL 7.41 x 7.79 x 4.31 6.77 x 6.77 x 4.06 5.93 x 4.00 4.25 4.25 3.60 .38 8.24 x 4.00 9.02 4.56 .25 2.5 lbs BP-66(188.3 x 197.9 x 109.5) (171.9 x 171.9 x 103.2) (150.6 x 101.6) (108) (108) (91.5) (9.6) (209.2 x 101.6) (229.0) (115.8) (6.35)DS80604HPL 9.41 x 7.79 x 4.31 8.77 x 6.77 x 4.06 7.91 x 4.00 6.25 4.25 3.60 .38 10.21 x 4.00 10.98 4.56 .25 3.0 lbs BP-86(239.1 x 197.9 x 109.5) (222.7 x 171.9 x 103.2) (200.9 x 101.6) (159) (108) (91.5) (9.6) (259.3 x 101.6) (279.0) (115.8) (6.35)DS80804HPL 9.39 x 9.76 x 4.31 8.74 x 8.74 x 4.06 7.91 x 6.00 6.25 6.25 3.60 .38 10.21 x 6.00 10.98 4.56 .25 3.5lbs BP-88(238.5 x 248.0 x 109.5) (222.1 x 222.1 x 103.2) (200.9 x 152.4) (159) (159) (91.5) (9.6) (259.3 x 152.4) (279.0) (6.35) (115.8)DS100806HPL 11.42 x 9.79 x 6.31 10.73 x 8.73 x 6.06 9.89 x 6.00 8.25 6.25 5.60 .38 12.19 x 6.00 12.96 6.56 .25 4.5 lbs BP-1008(290.1 x 248.6 x 160.3) (272.5 x 221.7 x 153.9) (251.2 x 152.4) (210) (159) (142.3) (9.6) (309.6 x 152.4) (329.3) (166.6) (6.35)DS121006HPL 13.45 x 11.83 x 6.31 12.69 x 10.69 x 6.06 11.88 x 8.00 10.25 8.25 5.60 .38 14.18 x 8.00 14.95 6.56 .25 6.0 lbs BP-1210(341.6 x <strong>300</strong>.5 x 160.3) (322.3 x 271.5 x 153.9) (301.7 x 203.2) (260) (210) (142.3) (9.6) (360.2 x 203.2) (379.7) (166.6) (6.35)DS141206HPL 15.49 x 13.86 x 6.34 14.72 x 12.72 x 6.06 13.91 x 10.00 12.25 10.25 5.60 .38 16.21 x 10.00 16.98 6.59 .25 8.0 lbs BP-1412(393.4 x 352.0 x 161.0) (373.9 x 323.1 x 153.9) (353.3 x 254.0) (311) (260) (142.3) (9.6) (411.7 x 254.0) (431.4) (167.4) (6.35)DS141208HPL 15.49 x 13.86 x 8.34 14.66 x 12.66 x 8.06 13.88 x 10.00 12.25 10.25 7.60 .38 16.19 x 10.00 16.96 8.59 .25 9.5 lbs BP-1412(393.4 x 352.0 x 211.8) (372.4 x 321.6 x 204.7) (352.5 x 254.0) (311) (260) (193.2) (9.6) (411.2 x 254.0) (430.9) (218.2) (6.35)DS161408HPL 17.58 x 15.96 x 8.34 16.69 x 14.69 x 8.06 15.96 x 12.00 14.25 12.25 7.60 .38 18.26 x 12.00 19.04 8.59 .25 11.5 lbs BP-1614(446.6 x 405.4 x 211.8) (424.0 x 373.1 x 204.7) (405.4 x 304.8) (362) (311) (193.2) (9.6) (464.0 x 304.8) (483.5) (218.2) (6.35)DS181610HPL 19.77 x 18.15 x 10.34 18.63 x 16.63 x 10.06 17.94 x 14.00 16.25 14.25 9.60 .38 20.24 x 14.00 21.02 10.59 .25 16.0 lbs BP-1816(502.2 x 461.0 x 262.6) (473.2 x 422.4 x 255.5) (455.6 x 355.6) (413) (362) (243.9) (9.6) (514.3 x 355.6) (533.8) (268.9) (6.35)DS201610HPL 21.79 x 18.16 x 10.34 20.63 x 16.63 x 10.06 19.96 x 14.00 18.25 14.25 9.59 .38 22.26 x 14.00 23.04 10.59 .25 17.5 lbs BP-J2016(553.5 x 4612 x 262.6) (524.0 x 422.4 x 255.5) (506.9 x 355.6) (463) (362) (243.7) (9.6) (565.6 x 355.6) (585.1) (268.9) (6.35)All measures are in inches, items in parentheses are in millimeters<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com22
DIAMONDSHIELD<strong>SE</strong>RIESTechnical Specifications - DiamondShield SeriesFHL“FHL” configuration - Hinged, 2 fiberglass/stainless steel bail wire latchesDSDS141206FHLNOTES:FHLFHLFHLBack PanelsConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignIndustry StandardsAccessoriesHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisUL/cUL 50File E64358 Type 1, 3, 3s, 12, 13, 4XNEMA 250Type 1, 3, 3s, 12, 13, 4XCSA Std C22.2File LR069014 Type 1, 3, 3s, 12, 13, 4XTemperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-Halogenated, <strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixNFPA No. 101 Flame Spread Class A (1)ORDERING INFOAluminum BP__AL pg. 330Fiberglass BP__FG pg. 330Stainless Steel BP__SS pg. 330Carbon Steel BP__CS pg. 330Mounting FeetMounting feetORDERING INFOSee the following DiamondShield accessories pagesSpecial AccessoriesVent DVK3KIT pg. 324Louver LPK3KIT pg. 324Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 326Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 327FHLModifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels See the following DiamondShield accessories pagesGrounding stud pg. 338, 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32223<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Opaque Cover Series “FHL” Configuration Technical DrawingsDIAMONDSHIELD<strong>SE</strong>RIESDiamondShield Opaque Cover Series <strong>Enclosures</strong> - “FHL” Configuration DimensionsSIZE ID OVERALL INSIDE MOUNTING OPT. MOUNT. PANELNUMBER H X W X D A X B X C P X R K L S T FEET E X F N J M WEIGHT NUMBERDS60604FHL 7.41 x 7.79 x 4.31 6.77 x 6.77 x 4.06 5.93 x 4.00 4.25 4.25 3.60 .38 8.24 x 4.00 9.02 4.56 .25 2.5 lbs BP-66(188.3 x 197.9 x 109.5) (171.9 x 171.9 x 103.2) (150.6 x 101.6) (108) (108) (91.5) (9.6) (209.2 x 101.6) (229.0) (115.8) (6.35)DS80604FHL 9.41 x 7.79 x 4.31 8.77 x 6.77 x 4.06 7.91 x 4.00 6.25 4.25 3.60 .38 10.21 x 4.00 10.98 4.56 .25 3.0 lbs BP-86(239.1 x 197.9 x 109.5) (222.7 x 171.9 x 103.2) (200.9 x 101.6) (159) (108) (91.5) (9.6) (259.3 x 101.6) (279.0) (115.8) (6.35)DS80804FHL 9.39 x 9.76 x 4.31 8.74 x 8.74 x 4.06 7.91 x 6.00 6.25 6.25 3.60 .38 10.21 x 6.00 10.98 4.56 .25 3.5lbs BP-88(238.5 x 248.0 x 109.5) (222.1 x 222.1 x 103.2) (200.9 x 152.4) (159) (159) (91.5) (9.6) (259.3 x 152.4) (279.0) (6.35) (115.8)DS100806FHL 11.42 x 9.79 x 6.31 10.73 x 8.73 x 6.06 9.89 x 6.00 8.25 6.25 5.60 .38 12.19 x 6.00 12.96 6.56 .25 4.5 lbs BP-1008(290.1 x 248.6 x 160.3) (272.5 x 221.7 x 153.9) (251.2 x 152.4) (210) (159) (142.3) (9.6) (309.6 x 152.4) (329.3) (166.6) (6.35)DS121006FHL 13.45 x 11.83 x 6.31 12.69 x 10.69 x 6.06 11.88 x 8.00 10.25 8.25 5.60 .38 14.18 x 8.00 14.95 6.56 .25 6.0 lbs BP-1210(341.6 x <strong>300</strong>.5 x 160.3) (322.3 x 271.5 x 153.9) (301.7 x 203.2) (260) (210) (142.3) (9.6) (360.2 x 203.2) (379.7) (166.6) (6.35)DS141206FHL 15.49 x 13.86 x 6.34 14.72 x 12.72 x 6.06 13.91 x 10.00 12.25 10.25 5.60 .38 16.21 x 10.00 16.98 6.59 .25 8.0 lbs BP-1412(393.4 x 352.0 x 161.0) (373.9 x 323.1 x 153.9) (353.3 x 254.0) (311) (260) (142.3) (9.6) (411.7 x 254.0) (431.4) (167.4) (6.35)DS141208FHL 15.49 x 13.86 x 8.34 14.66 x 12.66 x 8.06 13.88 x 10.00 12.25 10.25 7.60 .38 16.19 x 10.00 16.96 8.59 .25 9.5 lbs BP-1412(393.4 x 352.0 x 211.8) (372.4 x 321.6 x 204.7) (352.5 x 254.0) (311) (260) (193.2) (9.6) (411.2 x 254.0) (430.9) (218.2) (6.35)DS161408FHL 17.58 x 15.96 x 8.34 16.69 x 14.69 x 8.06 15.96 x 12.00 14.25 12.25 7.60 .38 18.26 x 12.00 19.04 8.59 .25 11.5 lbs BP-1614(446.6 x 405.4 x 211.8) (424.0 x 373.1 x 204.7) (405.4 x 304.8) (362) (311) (193.2) (9.6) (464.0 x 304.8) (483.5) (218.2) (6.35)DS181610FHL 19.77 x 18.15 x 10.34 18.63 x 16.63 x 10.06 17.94 x 14.00 16.25 14.25 9.60 .38 20.24 x 14.00 21.02 10.59 .25 16.0 lbs BP-1816(502.2 x 461.0 x 262.6) (473.2 x 422.4 x 255.5) (455.6 x 355.6) (413) (362) (243.9) (9.6) (514.3 x 355.6) (533.8) (268.9) (6.35)DS201610FHL 21.79 x 18.16 x 10.34 20.63 x 16.63 x 10.06 19.96 x 14.00 18.25 14.25 9.59 .38 22.26 x 14.00 23.04 10.59 .25 17.5 lbs BP-J2016(553.5 x 4612 x 262.6) (524.0 x 422.4 x 255.5) (506.9 x 355.6) (463) (362) (243.7) (9.6) (565.6 x 355.6) (585.1) (268.9) (6.35)All measures are in inches, items in parentheses are in millimeters<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com24
DIAMONDSHIELD<strong>SE</strong>RIESDiamondShield SeriesDSWThe <strong>Stahlin</strong> Diamondshield Seriesis our newest complete productoffering developed for designflexibility and pleasing aesthetics.Applications include high-endelectronics, harsh corrosiveenvironments, and industrialapplications both indoors andout. Unique internal panelmanagement capabilitiesprovides the end user withonly the features they needfor their application, yet ableto use every cubic inch ofvaluable internal enclosurespace. The series offers anadditional feature of panelmounting in the cover for useas an operator interface in industrial equipment control stations whenrequired.DiamondShield Series Ordering InformationUse the information below to derive specific catalog numbers.<strong>Stahlin</strong> catalog numbers first begin with Family ID, then size ID andconfiguration ID as a suffix. See the example below.Ordering Information - Deriving <strong>Catalog</strong> NumbersCvr Prefix Size ID Latching Suffix EXAMPLEDSW 60604 Latching Suffix = W “DS60604W”DiamondShield Series - Inside DimensionsSize ID H x W x D Optional Panel #DSW60604 7.41 x 7.79 x 4.31 BP66DSW80604 9.41 x 7.79 x 4.31 BP86DSW80804 9.39 x 9.76 x 4.31 BP88DSW100806 11.42 x 9.79 x 6.31 BP1008DSW121006 13.45 x 11.83 x 6.31 BP1210DSW141206 15.49 x 13.86 x 6.34 BP1412DSW141208 15.49 x 13.86 x 8.34 BP1412DSW161408 17.58 x 15.96 x 8.34 BP1614DSW181610 19.77 x 18.15 x 10.34 BP1816DSW201610 21.79 x 18.16 x 10.34 BPJ2016Optional back panels available in various materials. Details on the following pagesDiamondShield Series - ConfigurationsConfigurationID DESCRIPTIONW 4 cover screws, lift off cover configurationHW Hinged, 2 cover screws configurationHLL Hinged, link lock latch configurationHPL Hinged, padlock latch configurationFHL Hinged, 2 fiberglass/stainless steel bail wire latch configurationDiamondShield Series Shared CharacteristicsConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignPhysical Characteristics<strong>Non</strong> CorrosiveWater-tight/Dust-tightImpact Resistant<strong>Non</strong> ConductiveLight WeightUV ResistantWorkable MaterialEasy MaintenancePleasing AestheticsColor/FinishIndustry StandardsHot compression molded fiberglassreinforced polyester (thermoset)Poured polyurethane seamlessgasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless steel used onall external hardwarePanel mounting capability foroptional fixed rear panelAll bosses utilize threaded brassinserts accepting 10-32 screwsRounded edges, minimalprotrusions or exposed pocket areasfor assembly of dust and debrisStands up to an exceptionally broadrange of chemical exposuresResults in an environmentallysealed, environmentally sound spaceResilient material with high impactresistanceDouble insulated material.No incidental electrical contactSolid construction in a lightweightdesignMinimizes the affects of sunlightCuts, drills, punches, and saws withease and accuracyScratches and gouges can be restoredwith a petroleum jelly productSmooth lines, soft colors easily blendinto customer’s design conceptsSmooth surface, no color variations,swirls, or color pockets, no voids.Color is Glacier GrayUL/cUL 50File E64358Type 1, 3, 3s, 12, 13, 4XNEMA 250Type 1, 3, 3s, 12, 13, 4XCSA Std C22.2File LR069014Type 1, 3, 3s, 12, 13, 4XTemperature Range(-40°F to +250°F) (-40°C to 130°C)Flammability RatingUL94-5VSelf extinguishing<strong>Non</strong>-Halogenated,<strong>Non</strong>-flame propagatingChemical ResistanceFull chemical resistance chartslisted in appendixNFPA No. 101 Flame Spread Class A (1)25<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Window Series ConfigurationsW4 cover screws, lift off coverDesign Features● Interchangeable Covers &Hardware● Panel Management System● Clean, Contemporary Look● No Penetrating Hardware● Lift Off Cover Design,4 Cover Screws● Cover Panel● Unobstructed Walls● Formed in placeUrethane GasketDSW141206WDIAMONDSHIELD<strong>SE</strong>RIESHWHinged, 2 cover screwsDesign Features● Interchangeable Covers &Hardware● Panel Management System● Clean, Contemporary Look● No Penetrating Hardware● Full 180 degree Door Opening● Cover Panel● Unobstructed Walls● Formed in placeUrethane Gasket● Hinged Cover, 2 Cover ScrewsDS141206HWHLLHinged, 2 link lock latchesDesign Features● Interchangeable Covers &Hardware● Panel Management System● Clean, Contemporary Look● No Penetrating Hardware● Full 180 degree Door Opening● Cover Panel● Unobstructed Walls● Formed in placeUrethane Gasket● Hinged Cover, Link Lock LatchFor Quick EntryDS141206HLLHPLHinged, 2 pull latchesDesign Features● Interchangeable Covers &Hardware● Panel Management System● Clean, Contemporary Look● No Penetrating Hardware● Full 180 degree Door Opening● Cover Panel● Unobstructed Walls● Formed in placeUrethane Gasket● Hinged Cover, Quick ReleasePull LatchDS141206HPLFHLHinged, 2 fiberglass/stainless steel bail wire latchesDesign Features● Interchangeable Covers &Hardware● Panel Management System● Clean, Contemporary Look● No Penetrating Hardware● Full 180 degree Door Opening● Cover Panel● Unobstructed Walls● Formed in placeUrethane Gasket● Hinged Cover, Bale Wire Latch,<strong>Non</strong>-<strong>Metallic</strong>DS141206FHL<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com26
DIAMONDSHIELD<strong>SE</strong>RIESWTechnical Specifications - DiamondShield Series“W” configuration - 4 cover screws, lift off coverDSWDSW141206WNOTES:WWWConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignIndustry StandardsAccessoriesBack PanelsHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisUL/cUL 50File E64358 Type 1, 3, 3s, 12, 13, 4XNEMA 250Type 1, 3, 3s, 12, 13, 4XCSA Std C22.2File LR069014 Type 1, 3, 3s, 12, 13, 4XTemperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-Halogenated, <strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixNFPA No. 101 Flame Spread Class A (1)ORDERING INFOAluminum BP__AL pg. 330Fiberglass BP__FG pg. 330Stainless Steel BP__SS pg. 330Carbon Steel BP__CS pg. 330Mounting FeetMounting feetORDERING INFOSee the following DiamondShield accessories pagesSpecial AccessoriesVent DVK3KIT pg. 324Louver LPK3KIT pg. 324Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 326Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 327WModifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels See the following DiamondShield accessories pagesGrounding stud pg. 338, 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32227<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Window Series “W” Configuration Technical DrawingsDIAMONDSHIELD<strong>SE</strong>RIESViewing Window Cover (DSW)PART ID A B CDSW60604 4.25 4.25 3.48(107.95) (107.95) (88.26)DSW80604 6.25 4.25 3.48(158.75) (107.95) (88.26)DSW80804 6.25 6.25 3.48(158.75) (158.75) (88.26)DSW100806 8.25 6.25 5.48(209.55) (158.75) (139.19)DSW121006 10.25 8.25 5.48(260.35) (209.55) (139.19)DSW141206 12.25 10.25 5.48(311.15) (260.35) (139.19)DSW141208 12.25 10.25 7.48(311.15) (260.35) (189.99)DSW161408 14.25 12.25 7.48(361.95) (311.15) (189.99)DSW181610 16.25 14.25 9.48(412.75) (361.95) (240.79)DSW201610 18.25 14.25 9.46(463.55) (361.95) (240.28)All measures are in inches, items in parenthesesare in millimeters.DiamondShield Window Series <strong>Enclosures</strong> - “W” Configuration DimensionsSIZE ID OVERALL INSIDE MOUNTING OPT. MOUNT. PANELNUMBER H X W X D A X B X C P X R K L S T FEET E X F N J M WEIGHT NUMBERDSW60604W 7.41 x 7.79 x 4.31 6.77 x 6.77 x 4.06 5.93 x 4.00 4.25 4.25 3.60 .38 8.24 x 4.00 9.02 4.56 .25 2.5 lbs BP-66(188.3 x 197.9 x 109.5) (171.9 x 171.9 x 103.2) (150.6 x 101.6) (108) (108) (91.5) (9.6) (209.2 x 101.6) (229.0) (115.8) (6.35)DSW80604W 9.41 x 7.79 x 4.31 8.77 x 6.77 x 4.06 7.91 x 4.00 6.25 4.25 3.60 .38 10.21 x 4.00 10.98 4.56 .25 3.0 lbs BP-86(239.1 x 197.9 x 109.5) (222.7 x 171.9 x 103.2) (200.9 x 101.6) (159) (108) (91.5) (9.6) (259.3 x 101.6) (279.0) (115.8) (6.35)DSW80804W 9.39 x 9.76 x 4.31 8.74 x 8.74 x 4.06 7.91 x 6.00 6.25 6.25 3.60 .38 10.21 x 6.00 10.98 4.56 .25 3.5lbs BP-88(238.5 x 248.0 x 109.5) (222.1 x 222.1 x 103.2) (200.9 x 152.4) (159) (159) (91.5) (9.6) (259.3 x 152.4) (279.0) (6.35) (115.8)DSW100806W 11.42 x 9.79 x 6.31 10.73 x 8.73 x 6.06 9.89 x 6.00 8.25 6.25 5.60 .38 12.19 x 6.00 12.96 6.56 .25 4.5 lbs BP-1008(290.1 x 248.6 x 160.3) (272.5 x 221.7 x 153.9) (251.2 x 152.4) (210) (159) (142.3) (9.6) (309.6 x 152.4) (329.3) (166.6) (6.35)DSW121006W 13.45 x 11.83 x 6.31 12.69 x 10.69 x 6.06 11.88 x 8.00 10.25 8.25 5.60 .38 14.18 x 8.00 14.95 6.56 .25 6.0 lbs BP-1210(341.6 x <strong>300</strong>.5 x 160.3) (322.3 x 271.5 x 153.9) (301.7 x 203.2) (260) (210) (142.3) (9.6) (360.2 x 203.2) (379.7) (166.6) (6.35)DSW141206W 15.49 x 13.86 x 6.34 14.72 x 12.72 x 6.06 13.91 x 10.00 12.25 10.25 5.60 .38 16.21 x 10.00 16.98 6.59 .25 8.0 lbs BP-1412(393.4 x 352.0 x 161.0) (373.9 x 323.1 x 153.9) (353.3 x 254.0) (311) (260) (142.3) (9.6) (411.7 x 254.0) (431.4) (167.4) (6.35)DSW141208W 15.49 x 13.86 x 8.34 14.66 x 12.66 x 8.06 13.88 x 10.00 12.25 10.25 7.60 .38 16.19 x 10.00 16.96 8.59 .25 9.5 lbs BP-1412(393.4 x 352.0 x 211.8) (372.4 x 321.6 x 204.7) (352.5 x 254.0) (311) (260) (193.2) (9.6) (411.2 x 254.0) (430.9) (218.2) (6.35)DSW161408W 17.58 x 15.96 x 8.34 16.69 x 14.69 x 8.06 15.96 x 12.00 14.25 12.25 7.60 .38 18.26 x 12.00 19.04 8.59 .25 11.5 lbs BP-1614(446.6 x 405.4 x 211.8) (424.0 x 373.1 x 204.7) (405.4 x 304.8) (362) (311) (193.2) (9.6) (464.0 x 304.8) (483.5) (218.2) (6.35)DSW181610W 19.77 x 18.15 x 10.34 18.63 x 16.63 x 10.06 17.94 x 14.00 16.25 14.25 9.60 .38 20.24 x 14.00 21.02 10.59 .25 16.0 lbs BP-1816(502.2 x 461.0 x 262.6) (473.2 x 422.4 x 255.5) (455.6 x 355.6) (413) (362) (243.9) (9.6) (514.3 x 355.6) (533.8) (268.9) (6.35)DSW201610W 21.79 x 18.16 x 10.34 20.63 x 16.63 x 10.06 19.96 x 14.00 18.25 14.25 9.59 .38 22.26 x 14.00 23.04 10.59 .25 17.5 lbs BP-J2016(553.5 x 4612 x 262.6) (524.0 x 422.4 x 255.5) (506.9 x 355.6) (463) (362) (243.7) (9.6) (565.6 x 355.6) (585.1) (268.9) (6.35)All measures are in inches, items in parentheses are in millimeters<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com28
DIAMONDSHIELD<strong>SE</strong>RIESHWTechnical Specifications - DiamondShield Series“HW” configuration - Hinged, 2 cover screwsDSWDSW141206HWNOTES:HWHWHWConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignIndustry StandardsAccessoriesBack PanelsHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisUL/cUL 50File E64358 Type 1, 3, 3s, 12, 13, 4XNEMA 250Type 1, 3, 3s, 12, 13, 4XCSA Std C22.2File LR069014 Type 1, 3, 3s, 12, 13, 4XTemperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-Halogenated, <strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixNFPA No. 101 Flame Spread Class A (1)ORDERING INFOAluminum BP__AL pg. 330Fiberglass BP__FG pg. 330Stainless Steel BP__SS pg. 330Carbon Steel BP__CS pg. 330Mounting FeetMounting feetORDERING INFOSee the following DiamondShield accessories pagesSpecial AccessoriesVent DVK3KIT pg. 324Louver LPK3KIT pg. 324Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 326Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 327HWModifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels See the following DiamondShield accessories pagesGrounding stud pg. 338, 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32229<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Window Series “HW” Configuration Technical DrawingsDIAMONDSHIELD<strong>SE</strong>RIESViewing Window Cover (DSW)PART ID A B CDSW60604 4.25 4.25 3.48(107.95) (107.95) (88.26)DSW80604 6.25 4.25 3.48(158.75) (107.95) (88.26)DSW80804 6.25 6.25 3.48(158.75) (158.75) (88.26)DSW100806 8.25 6.25 5.48(209.55) (158.75) (139.19)DSW121006 10.25 8.25 5.48(260.35) (209.55) (139.19)DSW141206 12.25 10.25 5.48(311.15) (260.35) (139.19)DSW141208 12.25 10.25 7.48(311.15) (260.35) (189.99)DSW161408 14.25 12.25 7.48(361.95) (311.15) (189.99)DSW181610 16.25 14.25 9.48(412.75) (361.95) (240.79)DSW201610 18.25 14.25 9.46(463.55) (361.95) (240.28)All measures are in inches, items in parenthesesare in millimeters.DiamondShield Window Series <strong>Enclosures</strong> - “HW” Configuration DimensionsSIZE ID OVERALL INSIDE MOUNTING OPT. MOUNT. PANELNUMBER H X W X D A X B X C P X R K L S T FEET E X F N J M WEIGHT NUMBERDSW60604HW 7.41 x 7.79 x 4.31 6.77 x 6.77 x 4.06 5.93 x 4.00 4.25 4.25 3.60 .38 8.24 x 4.00 9.02 4.56 .25 2.5 lbs BP-66(188.3 x 197.9 x 109.5) (171.9 x 171.9 x 103.2) (150.6 x 101.6) (108) (108) (91.5) (9.6) (209.2 x 101.6) (229.0) (115.8) (6.35)DSW80604HW 9.41 x 7.79 x 4.31 8.77 x 6.77 x 4.06 7.91 x 4.00 6.25 4.25 3.60 .38 10.21 x 4.00 10.98 4.56 .25 3.0 lbs BP-86(239.1 x 197.9 x 109.5) (222.7 x 171.9 x 103.2) (200.9 x 101.6) (159) (108) (91.5) (9.6) (259.3 x 101.6) (279.0) (115.8) (6.35)DSW80804HW 9.39 x 9.76 x 4.31 8.74 x 8.74 x 4.06 7.91 x 6.00 6.25 6.25 3.60 .38 10.21 x 6.00 10.98 4.56 .25 3.5lbs BP-88(238.5 x 248.0 x 109.5) (222.1 x 222.1 x 103.2) (200.9 x 152.4) (159) (159) (91.5) (9.6) (259.3 x 152.4) (279.0) (6.35) (115.8)DSW100806HW 11.42 x 9.79 x 6.31 10.73 x 8.73 x 6.06 9.89 x 6.00 8.25 6.25 5.60 .38 12.19 x 6.00 12.96 6.56 .25 4.5 lbs BP-1008(290.1 x 248.6 x 160.3) (272.5 x 221.7 x 153.9) (251.2 x 152.4) (210) (159) (142.3) (9.6) (309.6 x 152.4) (329.3) (166.6) (6.35)DSW121006HW 13.45 x 11.83 x 6.31 12.69 x 10.69 x 6.06 11.88 x 8.00 10.25 8.25 5.60 .38 14.18 x 8.00 14.95 6.56 .25 6.0 lbs BP-1210(341.6 x <strong>300</strong>.5 x 160.3) (322.3 x 271.5 x 153.9) (301.7 x 203.2) (260) (210) (142.3) (9.6) (360.2 x 203.2) (379.7) (166.6) (6.35)DSW141206HW 15.49 x 13.86 x 6.34 14.72 x 12.72 x 6.06 13.91 x 10.00 12.25 10.25 5.60 .38 16.21 x 10.00 16.98 6.59 .25 8.0 lbs BP-1412(393.4 x 352.0 x 161.0) (373.9 x 323.1 x 153.9) (353.3 x 254.0) (311) (260) (142.3) (9.6) (411.7 x 254.0) (431.4) (167.4) (6.35)DSW141208HW 15.49 x 13.86 x 8.34 14.66 x 12.66 x 8.06 13.88 x 10.00 12.25 10.25 7.60 .38 16.19 x 10.00 16.96 8.59 .25 9.5 lbs BP-1412(393.4 x 352.0 x 211.8) (372.4 x 321.6 x 204.7) (352.5 x 254.0) (311) (260) (193.2) (9.6) (411.2 x 254.0) (430.9) (218.2) (6.35)DSW161408HW 17.58 x 15.96 x 8.34 16.69 x 14.69 x 8.06 15.96 x 12.00 14.25 12.25 7.60 .38 18.26 x 12.00 19.04 8.59 .25 11.5 lbs BP-1614(446.6 x 405.4 x 211.8) (424.0 x 373.1 x 204.7) (405.4 x 304.8) (362) (311) (193.2) (9.6) (464.0 x 304.8) (483.5) (218.2) (6.35)DSW181610HW 19.77 x 18.15 x 10.34 18.63 x 16.63 x 10.06 17.94 x 14.00 16.25 14.25 9.60 .38 20.24 x 14.00 21.02 10.59 .25 16.0 lbs BP-1816(502.2 x 461.0 x 262.6) (473.2 x 422.4 x 255.5) (455.6 x 355.6) (413) (362) (243.9) (9.6) (514.3 x 355.6) (533.8) (268.9) (6.35)DSW201610HW 21.79 x 18.16 x 10.34 20.63 x 16.63 x 10.06 19.96 x 14.00 18.25 14.25 9.59 .38 22.26 x 14.00 23.04 10.59 .25 17.5 lbs BP-J2016(553.5 x 4612 x 262.6) (524.0 x 422.4 x 255.5) (506.9 x 355.6) (463) (362) (243.7) (9.6) (565.6 x 355.6) (585.1) (268.9) (6.35)All measures are in inches, items in parentheses are in millimeters<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com30
DIAMONDSHIELD<strong>SE</strong>RIESTechnical Specifications - DiamondShield SeriesHLL“HLL” configuration - Hinged, 2 link lock latchesDSWDSW141206HLLNOTES:HLLHLLHLLBack PanelsConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignIndustry StandardsAccessoriesHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisUL/cUL 50File E64358 Type 1, 3, 3s, 12, 13, 4XNEMA 250Type 1, 3, 3s, 12, 13, 4XCSA Std C22.2File LR069014 Type 1, 3, 3s, 12, 13, 4XTemperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-Halogenated, <strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixNFPA No. 101 Flame Spread Class A (1)ORDERING INFOAluminum BP__AL pg. 330Fiberglass BP__FG pg. 330Stainless Steel BP__SS pg. 330Carbon Steel BP__CS pg. 330Mounting FeetMounting feetORDERING INFOSee the following DiamondShield accessories pagesSpecial AccessoriesVent DVK3KIT pg. 324Louver LPK3KIT pg. 324Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 326Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 327HLLModifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels See the following DiamondShield accessories pagesGrounding stud pg. 338, 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32231<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Window Series “HLL” Configuration Technical DrawingsDIAMONDSHIELD<strong>SE</strong>RIESViewing Window Cover (DSW)PART ID A B CDSW60604 4.25 4.25 3.48(107.95) (107.95) (88.26)DSW80604 6.25 4.25 3.48(158.75) (107.95) (88.26)DSW80804 6.25 6.25 3.48(158.75) (158.75) (88.26)DSW100806 8.25 6.25 5.48(209.55) (158.75) (139.19)DSW121006 10.25 8.25 5.48(260.35) (209.55) (139.19)DSW141206 12.25 10.25 5.48(311.15) (260.35) (139.19)DSW141208 12.25 10.25 7.48(311.15) (260.35) (189.99)DSW161408 14.25 12.25 7.48(361.95) (311.15) (189.99)DSW181610 16.25 14.25 9.48(412.75) (361.95) (240.79)DSW201610 18.25 14.25 9.46(463.55) (361.95) (240.28)All measures are in inches, items in parenthesesare in millimeters.DiamondShield Window Series <strong>Enclosures</strong> - “HLL” Configuration DimensionsSIZE ID OVERALL INSIDE MOUNTING OPT. MOUNT. PANELNUMBER H X W X D A X B X C P X R K L S T FEET E X F N J M WEIGHT NUMBERDSW60604HLL 7.41 x 7.79 x 4.31 6.77 x 6.77 x 4.06 5.93 x 4.00 4.25 4.25 3.60 .38 8.24 x 4.00 9.02 4.56 .25 2.5 lbs BP-66(188.3 x 197.9 x 109.5) (171.9 x 171.9 x 103.2) (150.6 x 101.6) (108) (108) (91.5) (9.6) (209.2 x 101.6) (229.0) (115.8) (6.35)DSW80604HLL 9.41 x 7.79 x 4.31 8.77 x 6.77 x 4.06 7.91 x 4.00 6.25 4.25 3.60 .38 10.21 x 4.00 10.98 4.56 .25 3.0 lbs BP-86(239.1 x 197.9 x 109.5) (222.7 x 171.9 x 103.2) (200.9 x 101.6) (159) (108) (91.5) (9.6) (259.3 x 101.6) (279.0) (115.8) (6.35)DSW80804HLL 9.39 x 9.76 x 4.31 8.74 x 8.74 x 4.06 7.91 x 6.00 6.25 6.25 3.60 .38 10.21 x 6.00 10.98 4.56 .25 3.5lbs BP-88(238.5 x 248.0 x 109.5) (222.1 x 222.1 x 103.2) (200.9 x 152.4) (159) (159) (91.5) (9.6) (259.3 x 152.4) (279.0) (6.35) (115.8)DSW100806HLL 11.42 x 9.79 x 6.31 10.73 x 8.73 x 6.06 9.89 x 6.00 8.25 6.25 5.60 .38 12.19 x 6.00 12.96 6.56 .25 4.5 lbs BP-1008(290.1 x 248.6 x 160.3) (272.5 x 221.7 x 153.9) (251.2 x 152.4) (210) (159) (142.3) (9.6) (309.6 x 152.4) (329.3) (166.6) (6.35)DSW121006HLL 13.45 x 11.83 x 6.31 12.69 x 10.69 x 6.06 11.88 x 8.00 10.25 8.25 5.60 .38 14.18 x 8.00 14.95 6.56 .25 6.0 lbs BP-1210(341.6 x <strong>300</strong>.5 x 160.3) (322.3 x 271.5 x 153.9) (301.7 x 203.2) (260) (210) (142.3) (9.6) (360.2 x 203.2) (379.7) (166.6) (6.35)DSW141206HLL 15.49 x 13.86 x 6.34 14.72 x 12.72 x 6.06 13.91 x 10.00 12.25 10.25 5.60 .38 16.21 x 10.00 16.98 6.59 .25 8.0 lbs BP-1412(393.4 x 352.0 x 161.0) (373.9 x 323.1 x 153.9) (353.3 x 254.0) (311) (260) (142.3) (9.6) (411.7 x 254.0) (431.4) (167.4) (6.35)DSW141208HLL 15.49 x 13.86 x 8.34 14.66 x 12.66 x 8.06 13.88 x 10.00 12.25 10.25 7.60 .38 16.19 x 10.00 16.96 8.59 .25 9.5 lbs BP-1412(393.4 x 352.0 x 211.8) (372.4 x 321.6 x 204.7) (352.5 x 254.0) (311) (260) (193.2) (9.6) (411.2 x 254.0) (430.9) (218.2) (6.35)DSW161408HLL 17.58 x 15.96 x 8.34 16.69 x 14.69 x 8.06 15.96 x 12.00 14.25 12.25 7.60 .38 18.26 x 12.00 19.04 8.59 .25 11.5 lbs BP-1614(446.6 x 405.4 x 211.8) (424.0 x 373.1 x 204.7) (405.4 x 304.8) (362) (311) (193.2) (9.6) (464.0 x 304.8) (483.5) (218.2) (6.35)DSW181610HLL 19.77 x 18.15 x 10.34 18.63 x 16.63 x 10.06 17.94 x 14.00 16.25 14.25 9.60 .38 20.24 x 14.00 21.02 10.59 .25 16.0 lbs BP-1816(502.2 x 461.0 x 262.6) (473.2 x 422.4 x 255.5) (455.6 x 355.6) (413) (362) (243.9) (9.6) (514.3 x 355.6) (533.8) (268.9) (6.35)DSW201610HLL 21.79 x 18.16 x 10.34 20.63 x 16.63 x 10.06 19.96 x 14.00 18.25 14.25 9.59 .38 22.26 x 14.00 23.04 10.59 .25 17.5 lbs BP-J2016(553.5 x 4612 x 262.6) (524.0 x 422.4 x 255.5) (506.9 x 355.6) (463) (362) (243.7) (9.6) (565.6 x 355.6) (585.1) (268.9) (6.35)All measures are in inches, items in parentheses are in millimeters<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com32
DIAMONDSHIELD<strong>SE</strong>RIESTechnical Specifications - DiamondShield SeriesHPL“HPL” configuration - Hinged, 2 pull latchesDSWDSW141206HPLNOTES:HPLHPLHPLBack PanelsConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignIndustry StandardsAccessoriesHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisUL/cUL 50File E64358 Type 1, 3, 3s, 12, 13, 4XNEMA 250Type 1, 3, 3s, 12, 13, 4XCSA Std C22.2File LR069014 Type 1, 3, 3s, 12, 13, 4XTemperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-Halogenated, <strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixNFPA No. 101 Flame Spread Class A (1)ORDERING INFOAluminum BP__AL pg. 330Fiberglass BP__FG pg. 330Stainless Steel BP__SS pg. 330Carbon Steel BP__CS pg. 330Mounting FeetMounting feetORDERING INFOSee the following DiamondShield accessories pagesSpecial AccessoriesVent DVK3KIT pg. 324Louver LPK3KIT pg. 324Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 326Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 327HPLModifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels See the following DiamondShield accessories pagesGrounding stud pg. 338, 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32233<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Window Series “HPL” Configuration Technical DrawingsDIAMONDSHIELD<strong>SE</strong>RIESViewing Window Cover (DSW)PART ID A B CDSW60604 4.25 4.25 3.48(107.95) (107.95) (88.26)DSW80604 6.25 4.25 3.48(158.75) (107.95) (88.26)DSW80804 6.25 6.25 3.48(158.75) (158.75) (88.26)DSW100806 8.25 6.25 5.48(209.55) (158.75) (139.19)DSW121006 10.25 8.25 5.48(260.35) (209.55) (139.19)DSW141206 12.25 10.25 5.48(311.15) (260.35) (139.19)DSW141208 12.25 10.25 7.48(311.15) (260.35) (189.99)DSW161408 14.25 12.25 7.48(361.95) (311.15) (189.99)DSW181610 16.25 14.25 9.48(412.75) (361.95) (240.79)DSW201610 18.25 14.25 9.46(463.55) (361.95) (240.28)All measures are in inches, items in parenthesesare in millimeters.DiamondShield Window Series <strong>Enclosures</strong> - “HPL” Configuration DimensionsSIZE ID OVERALL INSIDE MOUNTING OPT. MOUNT. PANELNUMBER H X W X D A X B X C P X R K L S T FEET E X F N J M WEIGHT NUMBERDSW60604HPL 7.41 x 7.79 x 4.31 6.77 x 6.77 x 4.06 5.93 x 4.00 4.25 4.25 3.60 .38 8.24 x 4.00 9.02 4.56 .25 2.5 lbs BP-66(188.3 x 197.9 x 109.5) (171.9 x 171.9 x 103.2) (150.6 x 101.6) (108) (108) (91.5) (9.6) (209.2 x 101.6) (229.0) (115.8) (6.35)DSW80604HPL 9.41 x 7.79 x 4.31 8.77 x 6.77 x 4.06 7.91 x 4.00 6.25 4.25 3.60 .38 10.21 x 4.00 10.98 4.56 .25 3.0 lbs BP-86(239.1 x 197.9 x 109.5) (222.7 x 171.9 x 103.2) (200.9 x 101.6) (159) (108) (91.5) (9.6) (259.3 x 101.6) (279.0) (115.8) (6.35)DSW80804HPL 9.39 x 9.76 x 4.31 8.74 x 8.74 x 4.06 7.91 x 6.00 6.25 6.25 3.60 .38 10.21 x 6.00 10.98 4.56 .25 3.5lbs BP-88(238.5 x 248.0 x 109.5) (222.1 x 222.1 x 103.2) (200.9 x 152.4) (159) (159) (91.5) (9.6) (259.3 x 152.4) (279.0) (6.35) (115.8)DSW100806HPL 11.42 x 9.79 x 6.31 10.73 x 8.73 x 6.06 9.89 x 6.00 8.25 6.25 5.60 .38 12.19 x 6.00 12.96 6.56 .25 4.5 lbs BP-1008(290.1 x 248.6 x 160.3) (272.5 x 221.7 x 153.9) (251.2 x 152.4) (210) (159) (142.3) (9.6) (309.6 x 152.4) (329.3) (166.6) (6.35)DSW121006HPL 13.45 x 11.83 x 6.31 12.69 x 10.69 x 6.06 11.88 x 8.00 10.25 8.25 5.60 .38 14.18 x 8.00 14.95 6.56 .25 6.0 lbs BP-1210(341.6 x <strong>300</strong>.5 x 160.3) (322.3 x 271.5 x 153.9) (301.7 x 203.2) (260) (210) (142.3) (9.6) (360.2 x 203.2) (379.7) (166.6) (6.35)DSW141206HPL 15.49 x 13.86 x 6.34 14.72 x 12.72 x 6.06 13.91 x 10.00 12.25 10.25 5.60 .38 16.21 x 10.00 16.98 6.59 .25 8.0 lbs BP-1412(393.4 x 352.0 x 161.0) (373.9 x 323.1 x 153.9) (353.3 x 254.0) (311) (260) (142.3) (9.6) (411.7 x 254.0) (431.4) (167.4) (6.35)DSW141208HPL 15.49 x 13.86 x 8.34 14.66 x 12.66 x 8.06 13.88 x 10.00 12.25 10.25 7.60 .38 16.19 x 10.00 16.96 8.59 .25 9.5 lbs BP-1412(393.4 x 352.0 x 211.8) (372.4 x 321.6 x 204.7) (352.5 x 254.0) (311) (260) (193.2) (9.6) (411.2 x 254.0) (430.9) (218.2) (6.35)DSW161408HPL 17.58 x 15.96 x 8.34 16.69 x 14.69 x 8.06 15.96 x 12.00 14.25 12.25 7.60 .38 18.26 x 12.00 19.04 8.59 .25 11.5 lbs BP-1614(446.6 x 405.4 x 211.8) (424.0 x 373.1 x 204.7) (405.4 x 304.8) (362) (311) (193.2) (9.6) (464.0 x 304.8) (483.5) (218.2) (6.35)DSW181610HPL 19.77 x 18.15 x 10.34 18.63 x 16.63 x 10.06 17.94 x 14.00 16.25 14.25 9.60 .38 20.24 x 14.00 21.02 10.59 .25 16.0 lbs BP-1816(502.2 x 461.0 x 262.6) (473.2 x 422.4 x 255.5) (455.6 x 355.6) (413) (362) (243.9) (9.6) (514.3 x 355.6) (533.8) (268.9) (6.35)DSW201610HPL 21.79 x 18.16 x 10.34 20.63 x 16.63 x 10.06 19.96 x 14.00 18.25 14.25 9.59 .38 22.26 x 14.00 23.04 10.59 .25 17.5 lbs BP-J2016(553.5 x 4612 x 262.6) (524.0 x 422.4 x 255.5) (506.9 x 355.6) (463) (362) (243.7) (9.6) (565.6 x 355.6) (585.1) (268.9) (6.35)All measures are in inches, items in parentheses are in millimeters<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com34
DIAMONDSHIELD<strong>SE</strong>RIESTechnical Specifications - DiamondShield SeriesFHL“FHL” configuration - Hinged, 2 fiberglass/stainless steel bail wire latchesDSWDSW141206FHLNOTES:FHLFHLFHLBack PanelsConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignIndustry StandardsAccessoriesHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisUL/cUL 50File E64358 Type 1, 3, 3s, 12, 13, 4XNEMA 250Type 1, 3, 3s, 12, 13, 4XCSA Std C22.2File LR069014 Type 1, 3, 3s, 12, 13, 4XTemperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-Halogenated, <strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixNFPA No. 101 Flame Spread Class A (1)ORDERING INFOAluminum BP__AL pg. 330Fiberglass BP__FG pg. 330Stainless Steel BP__SS pg. 330Carbon Steel BP__CS pg. 330Mounting FeetMounting feetORDERING INFOSee the following DiamondShield accessories pagesSpecial AccessoriesVent DVK3KIT pg. 324Louver LPK3KIT pg. 324Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 326Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 327FHLModifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels See the following DiamondShield accessories pagesGrounding stud pg. 338, 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32235<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Window Series “FHL” Configuration Technical DrawingsDIAMONDSHIELD<strong>SE</strong>RIESViewing Window Cover (DSW)PART ID A B CDSW60604 4.25 4.25 3.48(107.95) (107.95) (88.26)DSW80604 6.25 4.25 3.48(158.75) (107.95) (88.26)DSW80804 6.25 6.25 3.48(158.75) (158.75) (88.26)DSW100806 8.25 6.25 5.48(209.55) (158.75) (139.19)DSW121006 10.25 8.25 5.48(260.35) (209.55) (139.19)DSW141206 12.25 10.25 5.48(311.15) (260.35) (139.19)DSW141208 12.25 10.25 7.48(311.15) (260.35) (189.99)DSW161408 14.25 12.25 7.48(361.95) (311.15) (189.99)DSW181610 16.25 14.25 9.48(412.75) (361.95) (240.79)DSW201610 18.25 14.25 9.46(463.55) (361.95) (240.28)All measures are in inches, items in parenthesesare in millimeters.DiamondShield Window Series <strong>Enclosures</strong> - “FHL” Configuration DimensionsSIZE ID OVERALL INSIDE MOUNTING OPT. MOUNT. PANELNUMBER H X W X D A X B X C P X R K L S T FEET E X F N J M WEIGHT NUMBERDSW60604FHL 7.41 x 7.79 x 4.31 6.77 x 6.77 x 4.06 5.93 x 4.00 4.25 4.25 3.60 .38 8.24 x 4.00 9.02 4.56 .25 2.5 lbs BP-66(188.3 x 197.9 x 109.5) (171.9 x 171.9 x 103.2) (150.6 x 101.6) (108) (108) (91.5) (9.6) (209.2 x 101.6) (229.0) (115.8) (6.35)DSW80604FHL 9.41 x 7.79 x 4.31 8.77 x 6.77 x 4.06 7.91 x 4.00 6.25 4.25 3.60 .38 10.21 x 4.00 10.98 4.56 .25 3.0 lbs BP-86(239.1 x 197.9 x 109.5) (222.7 x 171.9 x 103.2) (200.9 x 101.6) (159) (108) (91.5) (9.6) (259.3 x 101.6) (279.0) (115.8) (6.35)DSW80804FHL 9.39 x 9.76 x 4.31 8.74 x 8.74 x 4.06 7.91 x 6.00 6.25 6.25 3.60 .38 10.21 x 6.00 10.98 4.56 .25 3.5lbs BP-88(238.5 x 248.0 x 109.5) (222.1 x 222.1 x 103.2) (200.9 x 152.4) (159) (159) (91.5) (9.6) (259.3 x 152.4) (279.0) (6.35) (115.8)DSW100806FHL 11.42 x 9.79 x 6.31 10.73 x 8.73 x 6.06 9.89 x 6.00 8.25 6.25 5.60 .38 12.19 x 6.00 12.96 6.56 .25 4.5 lbs BP-1008(290.1 x 248.6 x 160.3) (272.5 x 221.7 x 153.9) (251.2 x 152.4) (210) (159) (142.3) (9.6) (309.6 x 152.4) (329.3) (166.6) (6.35)DSW121006FHL 13.45 x 11.83 x 6.31 12.69 x 10.69 x 6.06 11.88 x 8.00 10.25 8.25 5.60 .38 14.18 x 8.00 14.95 6.56 .25 6.0 lbs BP-1210(341.6 x <strong>300</strong>.5 x 160.3) (322.3 x 271.5 x 153.9) (301.7 x 203.2) (260) (210) (142.3) (9.6) (360.2 x 203.2) (379.7) (166.6) (6.35)DSW141206FHL 15.49 x 13.86 x 6.34 14.72 x 12.72 x 6.06 13.91 x 10.00 12.25 10.25 5.60 .38 16.21 x 10.00 16.98 6.59 .25 8.0 lbs BP-1412(393.4 x 352.0 x 161.0) (373.9 x 323.1 x 153.9) (353.3 x 254.0) (311) (260) (142.3) (9.6) (411.7 x 254.0) (431.4) (167.4) (6.35)DSW141208FHL 15.49 x 13.86 x 8.34 14.66 x 12.66 x 8.06 13.88 x 10.00 12.25 10.25 7.60 .38 16.19 x 10.00 16.96 8.59 .25 9.5 lbs BP-1412(393.4 x 352.0 x 211.8) (372.4 x 321.6 x 204.7) (352.5 x 254.0) (311) (260) (193.2) (9.6) (411.2 x 254.0) (430.9) (218.2) (6.35)DSW161408FHL 17.58 x 15.96 x 8.34 16.69 x 14.69 x 8.06 15.96 x 12.00 14.25 12.25 7.60 .38 18.26 x 12.00 19.04 8.59 .25 11.5 lbs BP-1614(446.6 x 405.4 x 211.8) (424.0 x 373.1 x 204.7) (405.4 x 304.8) (362) (311) (193.2) (9.6) (464.0 x 304.8) (483.5) (218.2) (6.35)DSW181610FHL 19.77 x 18.15 x 10.34 18.63 x 16.63 x 10.06 17.94 x 14.00 16.25 14.25 9.60 .38 20.24 x 14.00 21.02 10.59 .25 16.0 lbs BP-1816(502.2 x 461.0 x 262.6) (473.2 x 422.4 x 255.5) (455.6 x 355.6) (413) (362) (243.9) (9.6) (514.3 x 355.6) (533.8) (268.9) (6.35)DSW201610FHL 21.79 x 18.16 x 10.34 20.63 x 16.63 x 10.06 19.96 x 14.00 18.25 14.25 9.59 .38 22.26 x 14.00 23.04 10.59 .25 17.5 lbs BP-J2016(553.5 x 4612 x 262.6) (524.0 x 422.4 x 255.5) (506.9 x 355.6) (463) (362) (243.7) (9.6) (565.6 x 355.6) (585.1) (268.9) (6.35)All measures are in inches, items in parentheses are in millimeters<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com36
DIAMONDSHIELD<strong>SE</strong>RIESDiamondShield SeriesDSCCThe <strong>Stahlin</strong> Diamondshield Seriesis our newest complete productoffering developed for designflexibility and pleasing aesthetics.Applications include high-endelectronics, harsh corrosiveenvironments, and industrialapplications both indoors andout. Unique internal panelmanagement capabilitiesprovides the end user withonly the features they needfor their application, yet ableto use every cubic inch ofvaluable internal enclosurespace. The series offers anadditional feature of panelmounting in the cover for useas an operator interface in industrial equipment control stations whenrequired.DiamondShield Series Ordering InformationUse the information below to derive specific catalog numbers.<strong>Stahlin</strong> catalog numbers first begin with Family ID, then size ID andconfiguration ID as a suffix. See the example below.Ordering Information - Deriving <strong>Catalog</strong> NumbersCvr Prefix Size ID Latching Suffix EXAMPLEDSCC 60604 Latching Suffix = W “DS60604W”DiamondShield Series - Inside DimensionsSize ID H x W x D Optional Panel #DSCC60604 7.41 x 7.79 x 4.31 BP66DSCC80604 9.41 x 7.79 x 4.31 BP86DSCC80804 9.39 x 9.76 x 4.31 BP88DSCC100806 11.42 x 9.79 x 6.31 BP1008DSCC121006 13.45 x 11.83 x 6.31 BP1210DSCC141206 15.49 x 13.86 x 6.34 BP1412DSCC141208 15.49 x 13.86 x 8.34 BP1412DSCC161408 17.58 x 15.96 x 8.34 BP1614Optional back panels available in various materials. Details on the following pagesDiamondShield Series - ConfigurationsConfigurationID DESCRIPTIONW 4 cover screws, lift off cover configurationHW Hinged, 2 cover screws configurationHLL Hinged, link lock latch configurationHPL Hinged, padlock latch configurationFHL Hinged, 2 fiberglass/stainless steel bail wire latch configurationConstructionWindow MaterialMaterialGasketRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignPhysical Characteristics<strong>Non</strong> CorrosiveWater-tight/Dust-tightImpact Resistant<strong>Non</strong> ConductiveLight WeightUV ResistantWorkable MaterialEasy MaintenancePleasing AestheticsColor/FinishIndustry StandardsFlush mounted window uses ascratch & abrasion resistant acrylicHot compression molded fiberglassreinforced polyester (thermoset)Poured polyurethane seamlessgasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless steel used onall external hardwarePanel mounting capability foroptional fixed rear panelAll bosses utilize threaded brassinserts accepting 10-32 screwsRounded edges, minimalprotrusions or exposed pocket areasfor assembly of dust and debrisStands up to an exceptionally broadrange of chemical exposuresResults in an environmentallysealed, environmentally sound spaceResilient material with high impactresistanceDouble insulated material.No incidental electrical contactSolid construction in a lightweightdesignMinimizes the affects of sunlightCuts, drills, punches, and saws withease and accuracyScratches and gouges can be restoredwith a petroleum jelly productSmooth lines, soft colors easily blendinto customer’s design conceptsSmooth surface, no color variations,swirls, or color pockets, no voids.Color is Glacier GrayUL/cUL 50File E64358Type 1, 3, 3s, 12, 13, 4XNEMA 250Type 1, 3, 3s, 12, 13, 4XCSA Std C22.2File LR069014Type 1, 3, 3s, 12, 13, 4XTemperature Range(-40°F to +250°F) (-40°C to 130°C)Flammability RatingUL94-5VSelf extinguishing<strong>Non</strong>-Halogenated,<strong>Non</strong>-flame propagatingChemical ResistanceFull chemical resistance chartslisted in appendixNFPA No. 101 Flame Spread Class A (1)37<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Clear Cover Series ConfigurationsW4 cover screws, lift off coverDesign Features● Interchangeable Covers &Hardware● Panel Management System● Clean, Contemporary Look● No Penetrating Hardware● Lift Off Cover Design,4 Cover Screws● Unobstructed Walls● Formed in placeUrethane GasketDIAMONDSHIELD<strong>SE</strong>RIESDSCC141206WHWHinged, 2 cover screwsDesign Features● Interchangeable Covers &Hardware● Panel Management System● Clean, Contemporary Look● No Penetrating Hardware● Full 180 degree Door Opening● Unobstructed Walls● Formed in placeUrethane Gasket● Hinged Cover, 2 Cover ScrewsDSCC141206HWHLLHinged, 2 link lock latchesDesign Features● Interchangeable Covers &Hardware● Panel Management System● Clean, Contemporary Look● No Penetrating Hardware● Full 180 degree Door Opening● Unobstructed Walls● Formed in placeUrethane Gasket● Hinged Cover, Link Lock LatchFor Quick EntryDSCC141206HLLHPLHinged, 2 pull latchesDesign Features● Interchangeable Covers &Hardware● Panel Management System● Clean, Contemporary Look● No Penetrating Hardware● Full 180 degree Door Opening● Unobstructed Walls● Formed in placeUrethane Gasket● Hinged Cover, Quick ReleasePull LatchDSCC141206HPLFHLHinged, 2 fiberglass/stainless steel bail wire latchesDesign Features● Interchangeable Covers &Hardware● Panel Management System● Clean, Contemporary Look● No Penetrating Hardware● Full 180 degree Door Opening● Unobstructed Walls● Formed in placeUrethane Gasket● Hinged Cover, Bale Wire Latch,<strong>Non</strong>-<strong>Metallic</strong>DSCC141206FHL<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com38
DIAMONDSHIELD<strong>SE</strong>RIESWTechnical Specifications - DiamondShield Series“W” configuration - 4 cover screws, lift off coverDSCCWConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignCoverHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisClear polycarbonate with UV inhibitorsDSCC141206WNOTES:WIndustry StandardsUL/cUL 50File E64358 Type 1, 3, 3s, 12, 13, 4XNEMA 250Type 1, 3, 3s, 12, 13, 4XCSA Std C22.2File LR069014 Type 1, 3, 3s, 12, 13, 4XIEC 60529IP66Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-halogenated, <strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixNFPA No. 101 Flame Spread Class A (1)39WAccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 330Fiberglass BP__FG pg. 330Stainless Steel BP__SS pg. 330Carbon Steel BP__CS pg. 330Mounting FeetMounting FeetORDERING INFOSee the following DiamondShield accessories pagesSpecial AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 323Carrying Handle RMEMK10956 pg. 326Fiberglass Pedestals JP3336 pg. 326WAssorted hubs and Five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor Capsule VC2-1 pg. 327Modifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels See the following DiamondShield accessories pagesGrounding stud pg. 338, 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 322<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Clear Cover Series “W” Configuration Technical DrawingsDIAMONDSHIELD<strong>SE</strong>RIESDiamondShield Clear Cover Series <strong>Enclosures</strong> - “W” Configuration DimensionsSIZE ID OVERALL INSIDE MOUNTING OPT. MOUNT. PANELNUMBER H X W X D A X B X C P X R K L S T FEET E X F N J M WEIGHT NUMBERDSCC60604W 7.41 x 7.79 x 4.31 6.77 x 6.77 x 4.06 5.93 x 4.00 4.25 4.25 3.60 .38 8.24 x 4.00 9.02 4.56 .25 2.5 lbs BP-66(188.3 x 197.9 x 109.5) (171.9 x 171.9 x 103.2) (150.6 x 101.6) (108) (108) (91.5) (9.6) (209.2 x 101.6) (229.0) (115.8) (6.35)DSCC80604W 9.41 x 7.79 x 4.31 8.77 x 6.77 x 4.06 7.91 x 4.00 6.25 4.25 3.60 .38 10.21 x 4.00 10.98 4.56 .25 3.0 lbs BP-86(239.1 x 197.9 x 109.5) (222.7 x 171.9 x 103.2) (200.9 x 101.6) (159) (108) (91.5) (9.6) (259.3 x 101.6) (279.0) (115.8) (6.35)DSCC80804W 9.39 x 9.76 x 4.31 8.74 x 8.74 x 4.06 7.91 x 6.00 6.25 6.25 3.60 .38 10.21 x 6.00 10.98 4.56 .25 3.5lbs BP-88(238.5 x 248.0 x 109.5) (222.1 x 222.1 x 103.2) (200.9 x 152.4) (159) (159) (91.5) (9.6) (259.3 x 152.4) (279.0) (6.35) (115.8)DSCC100806W 11.42 x 9.79 x 6.31 10.73 x 8.73 x 6.06 9.89 x 6.00 8.25 6.25 5.60 .38 12.19 x 6.00 12.96 6.56 .25 4.5 lbs BP-1008(290.1 x 248.6 x 160.3) (272.5 x 221.7 x 153.9) (251.2 x 152.4) (210) (159) (142.3) (9.6) (309.6 x 152.4) (329.3) (166.6) (6.35)DSCC121006W 13.45 x 11.83 x 6.31 12.69 x 10.69 x 6.06 11.88 x 8.00 10.25 8.25 5.60 .38 14.18 x 8.00 14.95 6.56 .25 6.0 lbs BP-1210(341.6 x <strong>300</strong>.5 x 160.3) (322.3 x 271.5 x 153.9) (301.7 x 203.2) (260) (210) (142.3) (9.6) (360.2 x 203.2) (379.7) (166.6) (6.35)DSCC141206W 15.49 x 13.86 x 6.34 14.72 x 12.72 x 6.06 13.91 x 10.00 12.25 10.25 5.60 .38 16.21 x 10.00 16.98 6.59 .25 8.0 lbs BP-1412(393.4 x 352.0 x 161.0) (373.9 x 323.1 x 153.9) (353.3 x 254.0) (311) (260) (142.3) (9.6) (411.7 x 254.0) (431.4) (167.4) (6.35)DSCC141208W 15.49 x 13.86 x 8.34 14.66 x 12.66 x 8.06 13.88 x 10.00 12.25 10.25 7.60 .38 16.19 x 10.00 16.96 8.59 .25 9.5 lbs BP-1412(393.4 x 352.0 x 211.8) (372.4 x 321.6 x 204.7) (352.5 x 254.0) (311) (260) (193.2) (9.6) (411.2 x 254.0) (430.9) (218.2) (6.35)DSCC161408W 17.58 x 15.96 x 8.34 16.69 x 14.69 x 8.06 15.96 x 12.00 14.25 12.25 7.60 .38 18.26 x 12.00 19.04 8.59 .25 11.5 lbs BP-1614(446.6 x 405.4 x 211.8) (424.0 x 373.1 x 204.7) (405.4 x 304.8) (362) (311) (193.2) (9.6) (464.0 x 304.8) (483.5) (218.2) (6.35)All measures are in inches, items in parentheses are in millimeters<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com40
DIAMONDSHIELD<strong>SE</strong>RIESHWTechnical Specifications - DiamondShield Series“HW” configuration - Hinged, 2 cover screwsDSCCWConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignCoverHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisClear polycarbonate with UV inhibitorsDSCC141206HWNOTES:WIndustry StandardsUL/cUL 50File E64358 Type 1, 3, 3s, 12, 13, 4XNEMA 250Type 1, 3, 3s, 12, 13, 4XCSA Std C22.2File LR069014 Type 1, 3, 3s, 12, 13, 4XIEC 60529IP66Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-halogenated, <strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixNFPA No. 101 Flame Spread Class A (1)41WAccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 330Fiberglass BP__FG pg. 330Stainless Steel BP__SS pg. 330Carbon Steel BP__CS pg. 330Mounting FeetMounting FeetORDERING INFOSee the following DiamondShield accessories pagesSpecial AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 323Carrying Handle RMEMK10956 pg. 326Fiberglass Pedestals JP3336 pg. 326WAssorted hubs and Five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor Capsule VC2-1 pg. 327Modifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels See the following DiamondShield accessories pagesGrounding stud pg. 338, 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 322<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Clear Cover Series “HW” Configuration Technical DrawingsDIAMONDSHIELD<strong>SE</strong>RIESDiamondShield Clear Cover Series <strong>Enclosures</strong> - “HW” Configuration DimensionsSIZE ID OVERALL INSIDE MOUNTING OPT. MOUNT. PANELNUMBER H X W X D A X B X C P X R K L S T FEET E X F N J M WEIGHT NUMBERDSCC60604HW 7.41 x 7.79 x 4.31 6.77 x 6.77 x 4.06 5.93 x 4.00 4.25 4.25 3.60 .38 8.24 x 4.00 9.02 4.56 .25 2.5 lbs BP-66(188.3 x 197.9 x 109.5) (171.9 x 171.9 x 103.2) (150.6 x 101.6) (108) (108) (91.5) (9.6) (209.2 x 101.6) (229.0) (115.8) (6.35)DSCC80604HW 9.41 x 7.79 x 4.31 8.77 x 6.77 x 4.06 7.91 x 4.00 6.25 4.25 3.60 .38 10.21 x 4.00 10.98 4.56 .25 3.0 lbs BP-86(239.1 x 197.9 x 109.5) (222.7 x 171.9 x 103.2) (200.9 x 101.6) (159) (108) (91.5) (9.6) (259.3 x 101.6) (279.0) (115.8) (6.35)DSCC80804HW 9.39 x 9.76 x 4.31 8.74 x 8.74 x 4.06 7.91 x 6.00 6.25 6.25 3.60 .38 10.21 x 6.00 10.98 4.56 .25 3.5lbs BP-88(238.5 x 248.0 x 109.5) (222.1 x 222.1 x 103.2) (200.9 x 152.4) (159) (159) (91.5) (9.6) (259.3 x 152.4) (279.0) (6.35) (115.8)DSCC100806HW 11.42 x 9.79 x 6.31 10.73 x 8.73 x 6.06 9.89 x 6.00 8.25 6.25 5.60 .38 12.19 x 6.00 12.96 6.56 .25 4.5 lbs BP-1008(290.1 x 248.6 x 160.3) (272.5 x 221.7 x 153.9) (251.2 x 152.4) (210) (159) (142.3) (9.6) (309.6 x 152.4) (329.3) (166.6) (6.35)DSCC121006HW 13.45 x 11.83 x 6.31 12.69 x 10.69 x 6.06 11.88 x 8.00 10.25 8.25 5.60 .38 14.18 x 8.00 14.95 6.56 .25 6.0 lbs BP-1210(341.6 x <strong>300</strong>.5 x 160.3) (322.3 x 271.5 x 153.9) (301.7 x 203.2) (260) (210) (142.3) (9.6) (360.2 x 203.2) (379.7) (166.6) (6.35)DSCC141206HW 15.49 x 13.86 x 6.34 14.72 x 12.72 x 6.06 13.91 x 10.00 12.25 10.25 5.60 .38 16.21 x 10.00 16.98 6.59 .25 8.0 lbs BP-1412(393.4 x 352.0 x 161.0) (373.9 x 323.1 x 153.9) (353.3 x 254.0) (311) (260) (142.3) (9.6) (411.7 x 254.0) (431.4) (167.4) (6.35)DSCC141208HW 15.49 x 13.86 x 8.34 14.66 x 12.66 x 8.06 13.88 x 10.00 12.25 10.25 7.60 .38 16.19 x 10.00 16.96 8.59 .25 9.5 lbs BP-1412(393.4 x 352.0 x 211.8) (372.4 x 321.6 x 204.7) (352.5 x 254.0) (311) (260) (193.2) (9.6) (411.2 x 254.0) (430.9) (218.2) (6.35)DSCC161408HW 17.58 x 15.96 x 8.34 16.69 x 14.69 x 8.06 15.96 x 12.00 14.25 12.25 7.60 .38 18.26 x 12.00 19.04 8.59 .25 11.5 lbs BP-1614(446.6 x 405.4 x 211.8) (424.0 x 373.1 x 204.7) (405.4 x 304.8) (362) (311) (193.2) (9.6) (464.0 x 304.8) (483.5) (218.2) (6.35)All measures are in inches, items in parentheses are in millimeters<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com42
DIAMONDSHIELD<strong>SE</strong>RIESTechnical Specifications - DiamondShield SeriesHLL“HLL” configuration - Hinged, 2 link lock latchesDSCCWConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignCoverHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisClear polycarbonate with UV inhibitorsDSCC141206HLLNOTES:WIndustry StandardsUL/cUL 50File E64358 Type 1, 3, 3s, 12, 13, 4XNEMA 250Type 1, 3, 3s, 12, 13, 4XCSA Std C22.2File LR069014 Type 1, 3, 3s, 12, 13, 4XIEC 60529IP66Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-halogenated, <strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixNFPA No. 101 Flame Spread Class A (1)43WAccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 330Fiberglass BP__FG pg. 330Stainless Steel BP__SS pg. 330Carbon Steel BP__CS pg. 330Mounting FeetMounting FeetORDERING INFOSee the following DiamondShield accessories pagesSpecial AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 323Carrying Handle RMEMK10956 pg. 326Fiberglass Pedestals JP3336 pg. 326WAssorted hubs and Five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor Capsule VC2-1 pg. 327Modifications See Special ModRight Modification on pg 314 -321ORDERING INFORemovable dead front panels See the following DiamondShield accessories pagesGrounding stud pg. 338, 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 322<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Clear Cover Series “HLL” Configuration Technical DrawingsDIAMONDSHIELD<strong>SE</strong>RIESDiamondShield Clear Cover Series <strong>Enclosures</strong> - “HLL” Configuration DimensionsSIZE ID OVERALL INSIDE MOUNTING OPT. MOUNT. PANELNUMBER H X W X D A X B X C P X R K L S T FEET E X F N J M WEIGHT NUMBERDSCC60604HLL 7.41 x 7.79 x 4.31 6.77 x 6.77 x 4.06 5.93 x 4.00 4.25 4.25 3.60 .38 8.24 x 4.00 9.02 4.56 .25 2.5 lbs BP-66(188.3 x 197.9 x 109.5) (171.9 x 171.9 x 103.2) (150.6 x 101.6) (108) (108) (91.5) (9.6) (209.2 x 101.6) (229.0) (115.8) (6.35)DSCC80604HLL 9.41 x 7.79 x 4.31 8.77 x 6.77 x 4.06 7.91 x 4.00 6.25 4.25 3.60 .38 10.21 x 4.00 10.98 4.56 .25 3.0 lbs BP-86(239.1 x 197.9 x 109.5) (222.7 x 171.9 x 103.2) (200.9 x 101.6) (159) (108) (91.5) (9.6) (259.3 x 101.6) (279.0) (115.8) (6.35)DSCC80804HLL 9.39 x 9.76 x 4.31 8.74 x 8.74 x 4.06 7.91 x 6.00 6.25 6.25 3.60 .38 10.21 x 6.00 10.98 4.56 .25 3.5lbs BP-88(238.5 x 248.0 x 109.5) (222.1 x 222.1 x 103.2) (200.9 x 152.4) (159) (159) (91.5) (9.6) (259.3 x 152.4) (279.0) (6.35) (115.8)DSCC100806HLL 11.42 x 9.79 x 6.31 10.73 x 8.73 x 6.06 9.89 x 6.00 8.25 6.25 5.60 .38 12.19 x 6.00 12.96 6.56 .25 4.5 lbs BP-1008(290.1 x 248.6 x 160.3) (272.5 x 221.7 x 153.9) (251.2 x 152.4) (210) (159) (142.3) (9.6) (309.6 x 152.4) (329.3) (166.6) (6.35)DSCC121006HLL 13.45 x 11.83 x 6.31 12.69 x 10.69 x 6.06 11.88 x 8.00 10.25 8.25 5.60 .38 14.18 x 8.00 14.95 6.56 .25 6.0 lbs BP-1210(341.6 x <strong>300</strong>.5 x 160.3) (322.3 x 271.5 x 153.9) (301.7 x 203.2) (260) (210) (142.3) (9.6) (360.2 x 203.2) (379.7) (166.6) (6.35)DSCC141206HLL 15.49 x 13.86 x 6.34 14.72 x 12.72 x 6.06 13.91 x 10.00 12.25 10.25 5.60 .38 16.21 x 10.00 16.98 6.59 .25 8.0 lbs BP-1412(393.4 x 352.0 x 161.0) (373.9 x 323.1 x 153.9) (353.3 x 254.0) (311) (260) (142.3) (9.6) (411.7 x 254.0) (431.4) (167.4) (6.35)DSCC141208HLL 15.49 x 13.86 x 8.34 14.66 x 12.66 x 8.06 13.88 x 10.00 12.25 10.25 7.60 .38 16.19 x 10.00 16.96 8.59 .25 9.5 lbs BP-1412(393.4 x 352.0 x 211.8) (372.4 x 321.6 x 204.7) (352.5 x 254.0) (311) (260) (193.2) (9.6) (411.2 x 254.0) (430.9) (218.2) (6.35)DSCC161408HLL 17.58 x 15.96 x 8.34 16.69 x 14.69 x 8.06 15.96 x 12.00 14.25 12.25 7.60 .38 18.26 x 12.00 19.04 8.59 .25 11.5 lbs BP-1614(446.6 x 405.4 x 211.8) (424.0 x 373.1 x 204.7) (405.4 x 304.8) (362) (311) (193.2) (9.6) (464.0 x 304.8) (483.5) (218.2) (6.35)All measures are in inches, items in parentheses are in millimeters<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com44
DIAMONDSHIELD<strong>SE</strong>RIESTechnical Specifications - DiamondShield SeriesHPL“HPL” configuration - Hinged, 2 pull latchesDSCCWConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignCoverHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisClear polycarbonate with UV inhibitorsDSCC141206HPLNOTES:WIndustry StandardsUL/cUL 50File E64358 Type 1, 3, 3s, 12, 13, 4XNEMA 250Type 1, 3, 3s, 12, 13, 4XCSA Std C22.2File LR069014 Type 1, 3, 3s, 12, 13, 4XIEC 60529IP66Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-halogenated, <strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixNFPA No. 101 Flame Spread Class A (1)45WAccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 330Fiberglass BP__FG pg. 330Stainless Steel BP__SS pg. 330Carbon Steel BP__CS pg. 330Mounting FeetMounting FeetORDERING INFOSee the following DiamondShield accessories pagesSpecial AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 323Carrying Handle RMEMK10956 pg. 326Fiberglass Pedestals JP3336 pg. 326WAssorted hubs and Five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor Capsule VC2-1 pg. 327Modifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels See the following DiamondShield accessories pagesGrounding stud pg. 338, 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 322<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Clear Cover Series “HPL” Configuration Technical DrawingsDIAMONDSHIELD<strong>SE</strong>RIESDiamondShield Clear Cover Series <strong>Enclosures</strong> - “HPL” Configuration DimensionsSIZE ID OVERALL INSIDE MOUNTING OPT. MOUNT. PANELNUMBER H X W X D A X B X C P X R K L S T FEET E X F N J M WEIGHT NUMBERDSCC60604HPL 7.41 x 7.79 x 4.31 6.77 x 6.77 x 4.06 5.93 x 4.00 4.25 4.25 3.60 .38 8.24 x 4.00 9.02 4.56 .25 2.5 lbs BP-66(188.3 x 197.9 x 109.5) (171.9 x 171.9 x 103.2) (150.6 x 101.6) (108) (108) (91.5) (9.6) (209.2 x 101.6) (229.0) (115.8) (6.35)DSCC80604HPL 9.41 x 7.79 x 4.31 8.77 x 6.77 x 4.06 7.91 x 4.00 6.25 4.25 3.60 .38 10.21 x 4.00 10.98 4.56 .25 3.0 lbs BP-86(239.1 x 197.9 x 109.5) (222.7 x 171.9 x 103.2) (200.9 x 101.6) (159) (108) (91.5) (9.6) (259.3 x 101.6) (279.0) (115.8) (6.35)DSCC80804HPL 9.39 x 9.76 x 4.31 8.74 x 8.74 x 4.06 7.91 x 6.00 6.25 6.25 3.60 .38 10.21 x 6.00 10.98 4.56 .25 3.5lbs BP-88(238.5 x 248.0 x 109.5) (222.1 x 222.1 x 103.2) (200.9 x 152.4) (159) (159) (91.5) (9.6) (259.3 x 152.4) (279.0) (6.35) (115.8)DSCC100806HPL 11.42 x 9.79 x 6.31 10.73 x 8.73 x 6.06 9.89 x 6.00 8.25 6.25 5.60 .38 12.19 x 6.00 12.96 6.56 .25 4.5 lbs BP-1008(290.1 x 248.6 x 160.3) (272.5 x 221.7 x 153.9) (251.2 x 152.4) (210) (159) (142.3) (9.6) (309.6 x 152.4) (329.3) (166.6) (6.35)DSCC121006HPL 13.45 x 11.83 x 6.31 12.69 x 10.69 x 6.06 11.88 x 8.00 10.25 8.25 5.60 .38 14.18 x 8.00 14.95 6.56 .25 6.0 lbs BP-1210(341.6 x <strong>300</strong>.5 x 160.3) (322.3 x 271.5 x 153.9) (301.7 x 203.2) (260) (210) (142.3) (9.6) (360.2 x 203.2) (379.7) (166.6) (6.35)DSCC141206HPL 15.49 x 13.86 x 6.34 14.72 x 12.72 x 6.06 13.91 x 10.00 12.25 10.25 5.60 .38 16.21 x 10.00 16.98 6.59 .25 8.0 lbs BP-1412(393.4 x 352.0 x 161.0) (373.9 x 323.1 x 153.9) (353.3 x 254.0) (311) (260) (142.3) (9.6) (411.7 x 254.0) (431.4) (167.4) (6.35)DSCC141208HPL 15.49 x 13.86 x 8.34 14.66 x 12.66 x 8.06 13.88 x 10.00 12.25 10.25 7.60 .38 16.19 x 10.00 16.96 8.59 .25 9.5 lbs BP-1412(393.4 x 352.0 x 211.8) (372.4 x 321.6 x 204.7) (352.5 x 254.0) (311) (260) (193.2) (9.6) (411.2 x 254.0) (430.9) (218.2) (6.35)DSCC161408HPL 17.58 x 15.96 x 8.34 16.69 x 14.69 x 8.06 15.96 x 12.00 14.25 12.25 7.60 .38 18.26 x 12.00 19.04 8.59 .25 11.5 lbs BP-1614(446.6 x 405.4 x 211.8) (424.0 x 373.1 x 204.7) (405.4 x 304.8) (362) (311) (193.2) (9.6) (464.0 x 304.8) (483.5) (218.2) (6.35)All measures are in inches, items in parentheses are in millimeters<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com46
DIAMONDSHIELD<strong>SE</strong>RIESTechnical Specifications - DiamondShield SeriesFHL“FHL” configuration - Hinged, 2 fiberglass/stainless steel bail wire latchesDSCCWConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignCoverHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisClear polycarbonate with UV inhibitorsDSCC141206FHLNOTES:WIndustry StandardsUL/cUL 50File E64358 Type 1, 3, 3s, 12, 13, 4XNEMA 250Type 1, 3, 3s, 12, 13, 4XCSA Std C22.2File LR069014 Type 1, 3, 3s, 12, 13, 4XIEC 60529IP66Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-halogenated, <strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixNFPA No. 101 Flame Spread Class A (1)47WAccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 330Fiberglass BP__FG pg. 330Stainless Steel BP__SS pg. 330Carbon Steel BP__CS pg. 330Mounting FeetMounting FeetORDERING INFOSee the following DiamondShield accessories pagesSpecial AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 323Carrying Handle RMEMK10956 pg. 326Fiberglass Pedestals JP3336 pg. 326WAssorted hubs and Five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor Capsule VC2-1 pg. 327Modifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels See the following DiamondShield accessories pagesGrounding stud pg. 338, 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 322<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Clear Cover Series “FHL” Configuration Technical DrawingsDIAMONDSHIELD<strong>SE</strong>RIESDiamondShield Clear Cover Series <strong>Enclosures</strong> - “FHL” Configuration DimensionsSIZE ID OVERALL INSIDE MOUNTING OPT. MOUNT. PANELNUMBER H X W X D A X B X C P X R K L S T FEET E X F N J M WEIGHT NUMBERDSCC60604FHL 7.41 x 7.79 x 4.31 6.77 x 6.77 x 4.06 5.93 x 4.00 4.25 4.25 3.60 .38 8.24 x 4.00 9.02 4.56 .25 2.5 lbs BP-66(188.3 x 197.9 x 109.5) (171.9 x 171.9 x 103.2) (150.6 x 101.6) (108) (108) (91.5) (9.6) (209.2 x 101.6) (229.0) (115.8) (6.35)DSCC80604FHL 9.41 x 7.79 x 4.31 8.77 x 6.77 x 4.06 7.91 x 4.00 6.25 4.25 3.60 .38 10.21 x 4.00 10.98 4.56 .25 3.0 lbs BP-86(239.1 x 197.9 x 109.5) (222.7 x 171.9 x 103.2) (200.9 x 101.6) (159) (108) (91.5) (9.6) (259.3 x 101.6) (279.0) (115.8) (6.35)DSCC80804FHL 9.39 x 9.76 x 4.31 8.74 x 8.74 x 4.06 7.91 x 6.00 6.25 6.25 3.60 .38 10.21 x 6.00 10.98 4.56 .25 3.5lbs BP-88(238.5 x 248.0 x 109.5) (222.1 x 222.1 x 103.2) (200.9 x 152.4) (159) (159) (91.5) (9.6) (259.3 x 152.4) (279.0) (6.35) (115.8)DSCC100806FHL 11.42 x 9.79 x 6.31 10.73 x 8.73 x 6.06 9.89 x 6.00 8.25 6.25 5.60 .38 12.19 x 6.00 12.96 6.56 .25 4.5 lbs BP-1008(290.1 x 248.6 x 160.3) (272.5 x 221.7 x 153.9) (251.2 x 152.4) (210) (159) (142.3) (9.6) (309.6 x 152.4) (329.3) (166.6) (6.35)DSCC121006FHL 13.45 x 11.83 x 6.31 12.69 x 10.69 x 6.06 11.88 x 8.00 10.25 8.25 5.60 .38 14.18 x 8.00 14.95 6.56 .25 6.0 lbs BP-1210(341.6 x <strong>300</strong>.5 x 160.3) (322.3 x 271.5 x 153.9) (301.7 x 203.2) (260) (210) (142.3) (9.6) (360.2 x 203.2) (379.7) (166.6) (6.35)DSCC141206FHL 15.49 x 13.86 x 6.34 14.72 x 12.72 x 6.06 13.91 x 10.00 12.25 10.25 5.60 .38 16.21 x 10.00 16.98 6.59 .25 8.0 lbs BP-1412(393.4 x 352.0 x 161.0) (373.9 x 323.1 x 153.9) (353.3 x 254.0) (311) (260) (142.3) (9.6) (411.7 x 254.0) (431.4) (167.4) (6.35)DSCC141208FHL 15.49 x 13.86 x 8.34 14.66 x 12.66 x 8.06 13.88 x 10.00 12.25 10.25 7.60 .38 16.19 x 10.00 16.96 8.59 .25 9.5 lbs BP-1412(393.4 x 352.0 x 211.8) (372.4 x 321.6 x 204.7) (352.5 x 254.0) (311) (260) (193.2) (9.6) (411.2 x 254.0) (430.9) (218.2) (6.35)DSCC161408FHL 17.58 x 15.96 x 8.34 16.69 x 14.69 x 8.06 15.96 x 12.00 14.25 12.25 7.60 .38 18.26 x 12.00 19.04 8.59 .25 11.5 lbs BP-1614(446.6 x 405.4 x 211.8) (424.0 x 373.1 x 204.7) (405.4 x 304.8) (362) (311) (193.2) (9.6) (464.0 x 304.8) (483.5) (218.2) (6.35)All measures are in inches, items in parentheses are in millimeters<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com48
DIAMONDSHIELD<strong>SE</strong>RIESThe Design Difference...Unsurpassed Panel Management System <strong>Stahlin</strong>’s innovative "No-Limits" Panel ManagementSystem enables DiamondShield users to takemaximum advantage of ALL enclosure space...includingthe inside of the cover!• Back Panel• Variable Height Stationary Panel• Variable Height Swing Panel• Dead Front Swing Panel• Cover Panel• Multiple PanelsThe Pioneering Panel ManagementSystem of DiamondShieldBrings You These Many Benefits:• Full utilization of both space and design. All spacewithin the enclosure can be accessed and utilized withminimal requirements for additional mounting hardware.• Panel maneuverability at both the time of assembly andin actual field use.• Optimized use and function of all usable space withinthe enclosure while assisting in the mounting of covermounted devices, such as touchpads and printedcircuit boards.• Maximized visibility of panels that offer critical feedback,such as instrumentation, while preserving the integrity ofthe enclosure• Ability to meet unique visual requirements usuallyassociated with a dead front panel.• Ability to meet the needs for mounting surface at rear ofenclosure.• Ability to meet end users' design capabilities and fieldchanges that would otherwise require major modificationor costly disassembly.• Ability to externally assemble, then "drop in" to theenclosure DIN rail mounted components, therebyminimizing assembly, modification and field servicing.• Maximum surface area for pushbutton or touchpadlayout. Maximizes end users' design possibilities.• Ability to meet end users' requirements for theinstallation of isolated visibility or custom visualrequirements.• Offers restricted access to areas of adjustmentand calibration.49<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Panel Management System (Part Number)DIAMONDSHIELD<strong>SE</strong>RIESBACK PANEL (BP)DEAD FRONT SWING PANEL (SWAL)● Traditional sizedback panel● Common industrymounting footprint● Wide choice of material● Mounts at the front ofthe enclosure● Larger surface areawhen compared to thevariable heightswing panel● Hinged on one side,secured to the other● Used in conjunction withcorner mounting postsBP1210ALVARIABLE HEIGHT STATIONARY PANEL (STAL)P1210SWALVARIABLE HEIGHT SWING PANEL (ASAL)● Mounts at any height inthe enclosure baseincluding as back panel oruse as a top stationarydead front panel● Larger panel area thantraditional back panelsmaximizes surfacemounting area● Used in conjunction withcorner mounting posts● Mounts at any height inthe enclosure base● Hinged on one side,secured to the other● Used in conjunction withcorner mounting postsP1210STALCOVER PANEL (CP)U<strong>SE</strong> MULTIPLE PANELSP1210ASAL● Stationary panel thatmounts to the inside ofthe enclosure cover.CP1210AL<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com50
DIAMONDSHIELD<strong>SE</strong>RIESThe Design Difference... Mounting VersatilityDiamondShield provides these optionsfor mounting:• Brass inserts allow mount of an enclosure toany flat surface with a through hole or to anystrut system.• Optional mounting Feet (DSMGFTKIT)Optional Mounting FeetFlush Threaded InsertInstalled Mounting FootStrut Mount51<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Series - Interchangeability OptionsOther features of DiamondShieldflexibility for in-the-field timeand cost savings:--- Ease of changing or replacing covers.--- Ease of changing locks.--- Flexibility for adding panels“down-the-road.”DIAMONDSHIELD<strong>SE</strong>RIESCover OptionsHinged Cover with Screw Down SecuringHW ConfigurationScrew Down CoverWHPLPull LatchFHLFiberglass and BailWire LatchHLLLink Lock Latch<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com52
DIAMONDSHIELD<strong>SE</strong>RIES<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> Online!<strong>Stahlin</strong> The World’s Leader In<strong>Non</strong>-metallic <strong>Enclosures</strong> Website.New Web Site Features• Enhanced Search Options• Cross Reference Feature• Detailed <strong>Product</strong> Information• PDF and CAD Drawings• Multi-Media Offerings• Special section For Boot Camp & AlumniVisit www.stahlin.com to experience our new web site.53<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Panel Management SystemUnique. Reliable. Flexible. Revolutionary. It’s What You Want It To Be!Just imagine ... an enclosure system that truly can be what you want...and need...it to be! Today, that enclosuresystem is a reality...with DiamondShield, from <strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong>.The revolutionary design of DiamondShield provides a one-of-a-kind enclosure architecture that can rangefrom “bare bones” basic yet durable simplicity to a highly customized, sophisticated protective structure.DIAMONDSHIELD<strong>SE</strong>RIESGo From This!To This!CoverPanelVariableHeightPanelBackPanelDiamondShield Series <strong>Enclosures</strong> Panel Management SystemSIZE FIXED PANEL SWING OPAQUE CLEAR C DID (MIN) PANEL (MIN) (MAX) CVR CVR (MIN)A A A B B60604 1.50 (38.1) 2.00 (50.08) 2.50 1.025 (26.03) 1.025 (26.03) .375 .57(63.50) (9.52) (14.48)80604 1.50 (38.1) 2.00 (50.08) 2.50 1.025 (26.03) 1.025 (26.03) .375 .57(63.50) (9.52) (14.48)80804 1.50 (38.1) 2.00 (50.08) 2.50 1.025 (26.03) 1.025 (26.03) .375 .57(63.50) (9.52) (14.48)100806 1.50 (38.1) 2.00 (50.08) 4.50 1.025 (26.03) 1.025 (26.03) .375 .57(114.30) (9.52) (14.48)121006 1.50 (38.1) 2.00 (50.08) 4.50 1.025 (26.03) 0.994 (25.24) .375 .57(114.30) (9.52) (14.48)141206 1.50 (38.1) 2.00 (50.08) 4.50 1.025 (26.03) 0.963 (24.44) .375 .57(114.30) (9.52) (14.48)141208 1.50 (38.1) 2.00 (50.08) 6.50 1.025 (26.03) 0.963 (24.44) .375 .57(165.1) (9.52) (14.48)161408 1.50 (38.1) 2.00 (50.08) 6.50 1.025 (26.03) 0.963 (24.44) .375 .57(165.1) (9.52) (14.48)181610 1.50 (38.1) 2.00 (50.08) 8.50 1.025 (26.03) N/A .375 .57(215.90) (9.52) (14.48)201610 1.50 (38.1) 2.00 (50.08) 8.50 1.025 (26.03) N/A .375 .57(215.90) (9.52) (14.48)Note: Swing and stationary panels adjust in 1/2" increments"C" not applicable for clear coverCover panel kit not available for clear cover options<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com54
DIAMONDSHIELD<strong>SE</strong>RIESDiamondShield Panel Management SystemVariable Height Swing PanelPARTNUMBERA B PANELTHK.PANELTYPEP806ASAL 6.38 6.56 .080 Flat(162) (1167) (2)P808ASAL 6.38 8.56 .080 Flat(162) (217) (2)P1008ASAL 8.38 8.56 .080 Flat(213) (217) (2)P1210ASAL 10.38 10.56 .080 Flat(264) (268) (2)P1412ASAL 12.38 12.56 .080 Flat(314) (319) (2)P1614ASAL 14.38 14.56 .080 Flat(365) (370) (2)P1816ASAL 16.38 16.56 .080 Flat(416) (421) (2)P2016ASAL 18.38 16.56 .080 Flat(467) (421) (2)Caution:Metic units are for reference;do not convert.Cover Panel DimensionsPARTNUMBERA B C D PANELTHK.PANELTYPEHOLEDIA.#OFHOLESCP606AL 5.64 5.64 5.02 5.02 .080 Flat .25 4(143) (143) (127) (127) (2) (6)CP806AL 7.68 5.64 7.05 5.02 .080 Flat .25 4(195) (143) (179) (127) (2) (6)CP808AL 7.68 7.68 7.05 7.05 .080 Flat .25 4(195) (195) (179) (179) (2) (6)CP1008AL 9.71 7.71 9.08 7.08 .080 Flat .25 4(247) (196) (231) (180) (2) (6)CP1210AL 11.74 9.74 11.12 9.12 .080 Flat .25 4(298) (247) (282) (232) (2) (6)CP1412AL 13.78 11.78 13.15 11.15 .080 Flat .25 4(350) (299) (334) (283) (2) (6)CP1614AL 15.81 13.81 15.18 13.18 .080 Flat .25 4(402) (351) (386) (334) (2) (6)CP1816AL 17.94 15.94 17.31 15.31 .080 Flat .25 4(456) (405) (440) (389) (2) (6)CP2016AL 19.76 15.76 19.13 15.13 .080 Flat .25 4(502) (400) (486) (384) (2) (6)Caution:Metic units are for reference;do not convert.Note: Cover panel kit includes cover panel and mounting hardware.55<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield Series Panel Management SystemBack Panel DimensionsPARTNUMBERBA BB BK BL PANELTHK.PANELTYPEHOLEDIA.#OFHOLESBP66 4.88 4.88 4.25 4.25 .080 Flat .25 4(124) (124) (108) (108) (2) (6)BP86 6.88 4.88 6.25 4.25 .080 Flat .25 4(175) (124) (159) (108) (2) (6)BP88 6.88 6.88 6.25 6.25 .080 Flat .25 4(175) (175) (159) (159) (2) (6)BP108 8.88 6.88 8.25 6.25 .080 Flat .25 4(225) (175) (210) (159) (2) (6)BP1210 10.88 8.88 10.25 8.25 .080 Flat .25 4(276) (225) (260) (210) (2) (6)BP1412 12.88 10.88 12.25 10.25 .080 Flat .25 4(327) (276) (311) (260) (2) (6)BP1614 14.88 12.88 14.25 12.25 .080 Flat .25 4(378) (327) (362) (311) (2) (6)BP1816 16.88 14.88 16.25 14.25 .080 Flat .25 4(429) (378) (413) (362) (2) (6)BPJ2016 18.88 14.88 18.25 14.25 .090 Flat .25 4(480) (378) (464) (362) (2) (6)DIAMONDSHIELD<strong>SE</strong>RIESCaution:Metic units are for reference;do not convertSuffix - Available materialsAL - AluminumCS - Painted Carbon SteelSS - Stainless SteelFG - FiberglassExample: BP1210ALDead Front Swing Panel DimensionsPARTNUMBERA B C D PANELTHK.PANELTYPEP806SWAL 8.56 6.56 6.37 5.70 .080 Flat(217) (167) (162) (145) (2)P808SWAL 8.56 8.56 6.37 7.70 .080 Flat(217) (217) (162) (196) (2)P1008SWAL 10.56 8.56 3.37 7.70 .080 Flat(268) (217) (213) (196) (2)P1210SWAL 12.56 10.56 10.37 9.70 .080 Flat(319) (268) (263) (246) (2)P1412SWAL 14.56 12.56 12.37 11.70 .080 Flat(370) (319) (314) (297) (2)P1614SWAL 16.56 14.56 14.37 15.57 .080 Flat(421) (370) (365) (399) (2)P1816SWAL 18.56 16.56 16.37 15.70 .080 Flat(471) (421) (467) (399) (2)P2016SWAL 20.56 16.56 18.37 15.70 .080 Flat(522) (421) (467) (399) (2)Caution: Metic units are for reference;do not convert.<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com56
DIAMONDSHIELD<strong>SE</strong>RIESDiamondShield Panel Kits & AccessoriesVariable Height Stationary Panel DimensionsPARTNUMBERA B C D PANEL PANELTHK. TYPEHOLEDIA.#OFHOLESP606STAL 6.56 6.56 4.25 4.25 .080 Flat .25 4(167) (167) (108) (108) (2) (6)P806STAL 8.56 6.56 6.25 4.25 .080 Flat .25 4(217) (167) (159) (108) (2) (6)P808STAL 8.56 8.56 6.25 6.25 .080 Flat .25 4(217) (217) (159) (159) (2) (6)P1008STAL 10.56 8.56 8.25 6.25 .080 Flat .25 4(268) (217) (210) (159) (2) (6)P1210STAL 12.56 0.56 10.25 8.25 .080 Flat .25 4(319) (268) (210) (260) (2) (6)P1412STAL 14.56 12.56 12.25 10.25 .080 Flat .25 4(370) (319) (311) (260) (2) (6)P1614STAL 16.56 14.56 14.25 12.25 .080 Flat .25 4(421) (370) (362) (311) (2) (6)P1816STAL 18.56 16.56 16.25 14.25 .080 Flat .25 4(471) (421) (413) (362) (2) (6)P2016STAL 20.56 16.56 18.25 14.25 .080 Flat .25 4(522) (421) (464) (362) (2) (6)Caution:Metic units are for reference;do not convert.Panel Kits - Accessories Only, Panels NOT IncludedSIZE STATIONARY STATIONARY SWING SWING CORNERID PANEL PANEL PANEL PANEL POSTACCESSORY KIT BRACKET KIT ACCESSORY KIT BRACKET KIT KIT60604 DS4PKA DSAPBKT N/A N/A DS4POST80604 DS4PKA DSAPBKT DS4SPKA DSSPBKT DS4POST80804 DS4PKA DSAPBKT DS4SPKA DSSPBKT DS4POST100806 DS6PKA DSAPBKT DS6SPKA DSSPBKT DS6POST121006 DS6PKA DSAPBKT DS6SPKA DSSPBKT DS6POST141206 DS6PKA DSAPBKT DS6SPKA DSSPBKT DS6POST141208 DS8PKA DSAPBKT DS8SPKA DSSPBKT DS8POST161408 DS8PKA DSAPBKT DS8SPKA DSSPBKT DS8POST181610 DS10PKA DSAPBKT DS10SPKA DSSPBKT DS10POST201610 DS10PKA DSAPBKT DS10SPKA DSSPBKT DS10POSTStationary Panel Bracket KitStationary PanelAccessory KitSwing PanelAccessory KitSwing Panel Bracket KitCorner Post Kit57<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
DiamondShield SeriesDIAMONDSHIELD<strong>SE</strong>RIESVariable Height Back Panel& Stationary PanelAccessory KitDead Front Swing Panel& Swing PanelAccessory KitVariable Height Swing Panel& Swing PanelAccessory KitVariable Height StationaryPanel & Stationary PanelAccessory KitPanel And Accessory Combination Kits, Includes PanelSIZE DEAD FRONT VARIABLE HEIGHT VARIABLE HEIGHT VARIABLE HEIGHTID SWING PANEL SWING PANEL & STATIONARY PNL BACK PNL && ACCESS. KIT ACCESS. KIT & ACCESS. KIT ACCESS. KIT60604 N/A N/A DS60604PKA DS60604BPKA80604 DS80604SPK DS80604SPKA DS80604PKA DS80604BPKA80804 DS80804SPK DS80804SPKA DS80804PKA DS80804BPKA100806 DS100806SPK DS100806SPKA DS100806PKA DS100806BPKA121006 DS121006SPK DS121006SPKA DS121006PKA DS121006BPKA141206 DS141206SPK DS141206SPKA DS141206PKA DS141206BPKA141208 DS141208SPK DS141208SPKA DS141208PKA DS141208BPKA161408 DS161408SPK DS161408SPKA DS161408PKA DS161408BPKA181610 DS181610SPK DS181610SPKA DS181610PKA DS181610BPKA201610 DS201610SPK DS201610SPKA DS201610PKA DS201610BPKALink Lock Latch KitFiberglass Wire Latch KitPull Latch KitCoverScrew KitHinge KitOther Accessory KitsSIZE MTG. HINGE OPAQUE CLEAR FIBERGLASS LINK LOCK PULLID FOOT HOLE COVER COVER WIRE LATCH KIT LATCH HINGEKIT PLUG SCREW KIT SCREW KIT LATCH KIT KIT KIT60604 DSMGFKIT DS3HPLUG DSWKIT DSCCWKIT DSFLKIT DSHLLKIT DSHPLKIT DS3HINGEKIT80604 DSMGFKIT DS4HPLUG DSWKIT DSCCWKIT DSFLKIT DSHLLKIT DSHPLKIT DS4HINGEKIT80804 DSMGFKIT DS4HPLUG DSWKIT DSCCWKIT DSFLKIT DSHLLKIT DSHPLKIT DS4HINGEKIT100806 DSMGFKIT DS5HPLUG DSWKIT DSCCWKIT DSFLKIT DSHLLKIT DSHPLKIT DS5HINGEKIT121006 DSMGFKIT DS5HPLUG DSWKIT DSCCWKIT DSFLKIT DSHLLKIT DSHPLKIT DS5HINGEKIT141206 DSMGFKIT DS6HPLUG DSWKIT DSCCWKIT DSFLKIT DSHLLKIT DSHPLKIT DS6HINGEKIT141208 DSMGFKIT DS6HPLUG DSWKIT DSCCWKIT DSFLKIT DSHLLKIT DSHPLKIT DS6HINGEKIT161408 DSMGFKIT DS6HPLUG DSWKIT DSCCWKIT DSFLKIT DSHLLKIT DSHPLKIT DS6HINGEKIT181610 DSMGFKIT DS6HPLUG DSWKIT DSCCWKIT DSFLKIT DSHLLKIT DSHPLKIT DS6HINGEKIT201610 DSMGFKIT DS6HPLUG DSWKIT DSCCWKIT DSFLKIT DSHLLKIT DSHPLKIT DS6HINGEKIT<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com58
CLASSIC <strong>SE</strong>RIESThe Classic SeriesThe Classic Series CLThe Classic Series enclosures are designed for general electrical and electronic applications as well asapplications requiring broader environmental concerns. This industry unique design uses a combination ofmodern styling and soft edges which subtly blend into the user’s own product.These enclosures enhance the appearance of any instrument installation. They are especially suitedfor high visibility locations found in both industrial and commercialapplications, but the chemical resistance and watertightcapabilities make them ideal across a broad spectrum ofSeries Featured HighlightsClassic environmental installations as well.This tasteful but rugged frame provides maximumIntegral Hingemechanical and environmental protection while alsooffering a broadly appealing cosmetic in a strongutility design.Classic Series Attributes● Flush fitting cover on smooth sided base● Minimal dust and particle catching edgesSolid ConstructionCompression MoldedFiberglass ReinforcedPolyesterSeamlessPolyurethaneDoor Gasket●●Integral hinging systemChemically resistant fiberglass reinforced polyesterEconomical● High temperature, flame retardant, non corrosive,environmental designsClassic Series SpecificationsLISTEDLISTED● Water tight● Rated NEMA1, 3, 4X, 12● Corrosion resistant●● Fire resistantUL/cUL approved●● Light weightCSA ApprovedIndustrial ToughLatch Mechanism• Padlock• Twistlock• Through-The-Door-LatchThe Classic Series is Applicable for Many Industries including:OEM & custom designs MRO facilities Manufacturing facilitiesWater & wastewaterprocessing
CLASSIC <strong>SE</strong>RIESThe Classic Series●●●Five basic sizesFive configurations(W, HW, HL, HLL, HPL)Four custom configurations(HSW, HSL, HSLL, HSPL)
CLASSIC <strong>SE</strong>RIESClassic Series enclosures for electricaland electronic applications combinemodern styling and built-in featureswith the durability and maintenancefree performance of fiberglassreinforced polyester. Theseenclosures enhance theappearance of any instrumentationinstallation. The Classic Seriesconsists of four basicconcepts: screw down cover,hinged cover, screw downcover with window and hingedcover with window. There arefive basic sizes in the range.There are eighteen possibleconfigurations to choose from which are allexplained in detail in the following pages.Classic Series Ordering InformationUse the information below to derive specific catalog numbers. <strong>Stahlin</strong>catalog numbers first begin with Family ID, then size ID andconfiguration ID as a suffix. See the example below.Ordering Information - Deriving <strong>Catalog</strong> NumbersFamily ID Size ID Configuration ID EXAMPLECL XXXX Configuration ID “CL707W”Classic Series - Inside DimensionsSize ID H x W x D Optional Panel #CL707 6.65 x 6.65 x 4.84 BP66CL907 8.59 x 6.59 x 4.84 BP86CL1109 10.59 x 8.59 x 5.84 BP108CL1311 12.59 x 10.59 x 6.34 BP1210CL1513 14.55 x 12.55 x 6.84 BP1412Optional back panels available in various materials. See Accessories Section.Classic Series - ConfigurationsConfigurationIDDESCRIPTIONW4 cover screws, lift off cover configurationHWHinged, 2 cover screws configurationHLHinged, through-the-door latch configurationHLLHinged, link lock latch configurationHPLHinged, padlock latch configurationHSW* Hinged on short side, screw cover configurationHSL* Hinged on short side, through-the-door latch configurationHSLL* Hinged on short side, link lock latch configurationHSPL* Hinged on short side, padlock latch configuration* All units hinged on short side are non-stock items available upon request.ConstructionMaterialGasketClassic SeriesClassic Series Shared CharacteristicsRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignPhysical Characteristics<strong>Non</strong> CorrosiveWater-tight/Dust-tightImpact Resistant<strong>Non</strong> ConductiveLight WeightUV ResistantWorkable MaterialEasy MaintenancePleasing AestheticsColor/FinishIndustry StandardsCLHot compression molded fiberglassreinforced polyester (thermoset)Poured polyurethane seamlessgasket provides watertight, dust-tightenvironmental sealNo protruding surfaces<strong>300</strong> Series stainless steel used on allexternal hardwarePanel mounting capability for optionalfixed rear panelAll bosses utilize threaded brass insertsaccepting 10-32 screwsRounded edges, minimalprotrusions or exposed pocket areas forassembly of dust and debrisStands up to an exceptionally broadrange of chemical exposuresResults in an environmentally sealed,environmentally sound spaceResilient material with high impactresistanceDouble insulated material.No incidental electrical contactSolid construction in a lightweightdesignMinimizes the affects of sunlightCuts, drills, punches, and saws withease and accuracyScratches and gouges can be restoredwith a petroleum jelly productSmooth lines, soft colors easily blend intocustomer’s design conceptsSmooth surface, no colorvariations, swirls, or color pockets, novoids. Color is Glacier GrayUL/cUL/ 50File E64358Type 1, 3, 4X, 12NEMA 250 Type 1, 3, 4X, 12CSA Std C22.2File LR069014Type 1, 3, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to 130°C)Flammability ratings UL94-5VWindow Flammability UL94V-0Chemical resistance Full chemical resistance chartslisted in appendixSelf Extinguishing<strong>Non</strong>-flame propagating61<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Classic Series ConfigurationsW 4 Cover Screws, lift off coverDesign Features● Lift off cover design● Stainless steel screw recessed from surface● Mounting Foot kit available● Soft edged design throughoutCLASSIC <strong>SE</strong>RIESCL1311WHWHinged, 2 cover screwsDesign Features● Integrally hinged cover● Stainless steel screw recessed from surface● Cover secures with two screws● Full 180° + door openingCL1311HWHLHinged, through-the-door latchDesign Features● Integrally hinged cover● Through door latch capture mechanism● Door mounted mechanism relieves access problemsto side-mounted hardware● Full 180° + door opening● Tool operated or simple handle mechanism● Secures door with internally mounted hardwareCL1311HL<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com62
Classic Series ConfigurationsCLASSIC <strong>SE</strong>RIESHLL Hinged, link lock latchDesign Features● Link lock latch for quick entry● Latch lies flat on side of enclosure● Can be lifted and turned with ease● Full 180° + door openingCL1311HLLHPLHinged, padlock latchDesign Features● Padlock latch for quick entry● Snap catch concept with toggle action● Integral hasp provides secure loop for padlock (not included)● Can be lifted and released with ease● Full 180° + door openingCL1311HPLHSWHinged on short side, screw coverDesign Features● Hinged on short side with integral hinge● Screw recessed from surface● Cover secures with two screws● Full 180° + door openingCL1311HSW63<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Classic Series ConfigurationsHSLHinged on short side, through-the-door latchDesign Features●●●●●●Hinged on short side with integral hingeThrough door latch capture mechanismDoor mounted entry relieves access problemsto side-mounted hardwareFull 180° + door openingTool operated or simple handle mechanismSecures door with internally mounted hardwareCLASSIC <strong>SE</strong>RIESCL1311HSLHSLLHinged on short side, link lock latchDesign Features● Hinged on short side with integral hinge● Link lock latch for quick entry● Latch lies flat on side of enclosure● Can be lifted and turned with ease● Full 180° + door openingCL1311HSLLHSPLHinged, short side, padlock latchDesign Features●●●●●Hinged on short side with integral hingePad lock latch for quick entrySnap catch concept with toggle actionIntegral hasp provides secure loopfor padlock (not included)Full 180° + door openingCL1311HSPLBack Panels(see chart on page 329)Mounting Feet(see page 337)Dead Front Panels(see page 332)<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com64
CLASSIC <strong>SE</strong>RIESWTechnical Specifications - Classic Series“W” configuration - 4 cover screws, lift off coverCLWConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all external hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisCL1311WNOTES:WWIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 12NEMA 250 Type 1, 3, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Carbon Steel BP__CS pg. 329Mounting FeetORDERING INFOMounting feet CLMTGFTKIT pg. 337Special AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 326WModifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels pg. 332Grounding stud pg. 338Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32265<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Classic Series "W" Configuration Technical DrawingsWB1 1/2CMounting Feet Available(see page 337)CLASSIC <strong>SE</strong>RIESAAH M AB<strong>SE</strong>CTION B-BFBack Panel Available(see page 329)LDJEKNB<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVERDead Front Panel Available( see page 332)Classic Series <strong>Enclosures</strong> - “W” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NENCLOSUREWEIGHTPANELNUMBERCL707W 7.21 x 7.21 x 5.09 6.65 x 6.65 x 4.84 5.71 x 5.71 4.39 4.25 4.25 4.04 4.04 3 lbs. BP-66(183 x 183 x 129) (169 x 169 x 123) (145 x 145) (111) (108) (108) (103) (103)CL907W 9.21 x 7.21 x 5.09 8.59 x 6.59 x 4.84 7.71 x 5.71 4.39 6.25 4.25 6.04 4.04 4 lbs. BP-86(234 x 183 x 129) (218 x 167 x 123) (196 x 145) (111) (159) (108) (154) (103)CL1109W 11.21 x 9.21 x 6.09 10.59 x 8.59 x 5.84 9.71 x 7.71 5.39 8.25 6.25 8.04 6.04 5 lbs. BP-108(285 x 234 x 155) (269 x 218 x 148) (247 x 196) (137) (210) (159) (204) (154)CL1311W 13.21 x 11.21 x 6.59 12.59 x 10.59 x 6.34 11.71 x 9.71 5.89 10.25 8.25 10.04 8.04 7 lbs. BP-1210(336 x 285 x 167) (320 x 269 x 161) (298 x 247) (150) (260) (210) (255) (204)CL1513W 15.21 x 13.21 x 7.09 14.55 x 12.55 x 6.84 13.71 x 11.71 6.39 12.25 10.25 12.04 10.04 9 lbs. BP-1412(386 x 336 x 180) (370 x 319 x 174) (348 x 298) (162) (311) (260) (306) (255)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com66
CLASSIC <strong>SE</strong>RIESHWTechnical Specifications - Classic Series“HW” configuration - Hinged, 2 cover screwsCLHW ConstructionMaterialGasketRecessed screwsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHingeHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket produces watertight,dusttight sealNo protruding surfaces<strong>300</strong> series stainless used throughoutPanel mounting capability for fixed rear panelAll bosses utilize threaded inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas for theassembly of dust and debrisStainless steel hinge pinsCL1311HWNOTES:HWHWBack PanelsIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 12NEMA 250 Type 1, 3, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Carbon Steel BP__CS pg. 329Mounting FeetORDERING INFOMounting feet CLMTGFTKIT pg. 337Special AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 326HWModifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels pg. 332Grounding stud pg. 338Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32267<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Classic Series “HW” Configuration Technical DrawingsWB1 1/2CMounting Feet Available(see page 337)CLASSIC <strong>SE</strong>RIESAAH M AB<strong>SE</strong>CTION B-BFBack Panel Available(see page 329)LDJEKNB<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVERDead Front Panel Available( see page 332)Classic Series <strong>Enclosures</strong> - “HW” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NENCLOSUREWEIGHTPANELNUMBERCL707HW 7.21 x 7.21 x 5.09 6.65 x 6.65 x 4.84 5.71 x 5.71 4.39 4.25 4.25 4.04 4.04 3 lbs. BP-66(183 x 183 x 129) (169 x 169 x 123) (145 x 145) (111) (108) (108) (103) (103)CL907HW 9.21 x 7.21 x 5.09 8.59 x 6.59 x 4.84 7.71 x 5.71 4.39 6.25 4.25 6.04 4.04 4 lbs. BP-86(234 x 183 x 129) (218 x 167 x 123) (196 x 145) (111) (159) (108) (154) (103)CL1109HW 11.21 x 9.21 x 6.09 10.59 x 8.59 x 5.84 9.71 x 7.71 5.39 8.25 6.25 8.04 6.04 5 lbs. BP-108(285 x 234 x 155) (269 x 218 x 148) (247 x 196) (137) (210) (159) (204) (154)CL1311HW 13.21 x 11.21 x 6.59 12.59 x 10.59 x 6.34 11.71 x 9.71 5.89 10.25 8.25 10.04 8.04 7 lbs. BP-1210(336 x 285 x 167) (320 x 269 x 161) (298 x 247) (150) (260) (210) (255) (204)CL1513HW 15.21 x 13.21 x 7.09 14.55 x 12.55 x 6.84 13.71 x 11.71 6.39 12.25 10.25 12.04 10.04 9 lbs. BP-1412(386 x 336 x 180) (370 x 319 x 174) (348 x 298) (162) (311) (260) (306) (255)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com68
CLASSIC <strong>SE</strong>RIESHLTechnical Specifications - Classic Series“HL” configuration - Hinged, through-the-door latchCLHLConstructionMaterialGasketStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHingeHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all external hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisStainless steel hinge pinsCL1311HLNOTES:HLHLIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 12NEMA 250 Type 1, 3, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Carbon Steel BP__CS pg. 329Mounting FeetORDERING INFOMounting feet CLMTGFTKIT pg. 337Special AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 326HLModifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels pg. 332Grounding stud pg. 338Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32269<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Classic Series “HL” Configuration Technical DrawingsWB1 1/2CMounting Feet Available(see page 337)CLASSIC <strong>SE</strong>RIESAAH M AB<strong>SE</strong>CTION B-BFBack Panel Available(see page 329)LDJEKNB<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVERDead Front Panel Available( see page 332)Classic Series <strong>Enclosures</strong> - “HL” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NENCLOSUREWEIGHTPANELNUMBERCL707HL 7.21 x 7.21 x 5.09 6.65 x 6.65 x 4.84 5.71 x 5.71 4.39 4.25 4.25 4.04 4.04 3 lbs. BP-66(183 x 183 x 129) (169 x 169 x 123) (145 x 145) (111) (108) (108) (103) (103)CL907HL 9.21 x 7.21 x 5.09 8.59 x 6.59 x 4.84 7.71 x 5.71 4.39 6.25 4.25 6.04 4.04 4 lbs. BP-86(234 x 183 x 129) (218 x 167 x 123) (196 x 145) (111) (159) (108) (154) (103)CL1109HL 11.21 x 9.21 x 6.09 10.59 x 8.59 x 5.84 9.71 x 7.71 5.39 8.25 6.25 8.04 6.04 5 lbs. BP-108(285 x 234 x 155) (269 x 218 x 148) (247 x 196) (137) (210) (159) (204) (154)CL1311HL 13.21 x 11.21 x 6.59 12.59 x 10.59 x 6.34 11.71 x 9.71 5.89 10.25 8.25 10.04 8.04 7 lbs. BP-1210(336 x 285 x 167) (320 x 269 x 161) (298 x 247) (150) (260) (210) (255) (204)CL1513HL 15.21 x 13.21 x 7.09 14.55 x 12.55 x 6.84 13.71 x 11.71 6.39 12.25 10.25 12.04 10.04 9 lbs. BP-1412(386 x 336 x 180) (370 x 319 x 174) (348 x 298) (162) (311) (260) (306) (255)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com70
CLASSIC <strong>SE</strong>RIESTechnical Specifications - Classic SeriesHLL“HLL” configuration - Hinged, linklock latchCLHLL ConstructionMaterialGasketStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHingeHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all external hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisStainless steel hinge pinsCL1311HLLNOTES:HLLHLLBack PanelsIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 12NEMA 250 Type 1, 3, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Carbon Steel BP__CS pg. 329Mounting FeetORDERING INFOMounting feet CLMTGFTKIT pg. 337Special AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 326HLLModifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels pg. 332Grounding stud pg. 338Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32271<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Classic Series “HLL” Configuration Technical DrawingsMounting Feet Available(see page 337)CLASSIC <strong>SE</strong>RIESBack Panel Available(see page 329)Dead Front Panel Available( see page 332)Classic Series <strong>Enclosures</strong> - “HLL” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NENCLOSUREWEIGHTPANELNUMBERCL707HLL 7.21 x 7.21 x 5.09 6.65 x 6.65 x 4.84 5.71 x 5.71 4.39 4.25 4.25 4.04 4.04 3 lbs. BP-66(183 x 183 x 129) (169 x 169 x 123) (145 x 145) (111) (108) (108) (103) (103)CL907HLL 9.21 x 7.21 x 5.09 8.59 x 6.59 x 4.84 7.71 x 5.71 4.39 6.25 4.25 6.04 4.04 4 lbs. BP-86(234 x 183 x 129) (218 x 167 x 123) (196 x 145) (111) (159) (108) (154) (103)CL1109HLL 11.21 x 9.21 x 6.09 10.59 x 8.59 x 5.84 9.71 x 7.71 5.39 8.25 6.25 8.04 6.04 5 lbs. BP-108(285 x 234 x 155) (269 x 218 x 148) (247 x 196) (137) (210) (159) (204) (154)CL1311HLL 13.21 x 11.21 x 6.59 12.59 x 10.59 x 6.34 11.71 x 9.71 5.89 10.25 8.25 10.04 8.04 7 lbs. BP-1210(336 x 285 x 167) (320 x 269 x 161) (298 x 247) (150) (260) (210) (255) (204)CL1513HLL 15.21 x 13.21 x 7.09 14.55 x 12.55 x 6.84 13.71 x 11.71 6.39 12.25 10.25 12.04 10.04 9 lbs. BP-1412(386 x 336 x 180) (370 x 319 x 174) (348 x 298) (162) (311) (260) (306) (255)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com72
CLASSIC <strong>SE</strong>RIESTechnical Specifications - Classic SeriesHPL“HPL” configuration - Hinged, padlock latchCLHPLConstructionMaterialGasketStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHingeHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all external hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisStainless steel hinge pinsCL1311HPLNOTES:HPLHPLBack PanelsIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 12NEMA 250 Type 1, 3, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Carbon Steel BP__CS pg. 329Mounting FeetORDERING INFOMounting feet CLMTGFTKIT pg. 337Special AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 326HPLModifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels pg. 332Grounding stud pg. 338Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32273<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Classic Series “HPL” Configuration Technical DrawingsMounting Feet Available(see page 337)CLASSIC <strong>SE</strong>RIESBack Panel Available(see page 329)Dead Front Panel Available( see page 332)Classic Series <strong>Enclosures</strong> - “HPL” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NENCLOSUREWEIGHTPANELNUMBERCL707HPL 7.21 x 7.21 x 5.09 6.65 x 6.65 x 4.84 5.71 x 5.71 4.39 4.25 4.25 4.04 4.04 3 lbs. BP-66(183 x 183 x 129) (169 x 169 x 123) (145 x 145) (111) (108) (108) (103) (103)CL907HPL 9.21 x 7.21 x 5.09 8.59 x 6.59 x 4.84 7.71 x 5.71 4.39 6.25 4.25 6.04 4.04 4 lbs. BP-86(234 x 183 x 129) (218 x 167 x 123) (196 x 145) (111) (159) (108) (154) (103)CL1109HPL 11.21 x 9.21 x 6.09 10.59 x 8.59 x 5.84 9.71 x 7.71 5.39 8.25 6.25 8.04 6.04 5 lbs. BP-108(285 x 234 x 155) (269 x 218 x 148) (247 x 196) (137) (210) (159) (204) (154)CL1311HPL 13.21 x 11.21 x 6.59 12.59 x 10.59 x 6.34 11.71 x 9.71 5.89 10.25 8.25 10.04 8.04 7 lbs. BP-1210(336 x 285 x 167) (320 x 269 x 161) (298 x 247) (150) (260) (210) (255) (204)CL1513HPL 15.21 x 13.21 x 7.09 14.55 x 12.55 x 6.84 13.71 x 11.71 6.39 12.25 10.25 12.04 10.04 9 lbs. BP-1412(386 x 336 x 180) (370 x 319 x 174) (348 x 298) (162) (311) (260) (306) (255)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com74
CLASSIC <strong>SE</strong>RIESTechnical Specifications - Classic Series“HSW” configuration - Hinged on short side, screw coverCLHSW ConstructionMaterialGasketRecessed screwsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHingeHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all external hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forthe assembly of dust and debrisStainless steel hinge pinsCL1311HSWNOTES:HSWHSWBack PanelsIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 12NEMA 250 Type 1, 3, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Carbon Steel BP__CS pg. 329Mounting FeetORDERING INFOMounting feet CLMTGFTKIT pg. 337Special AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 326HSWModifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels pg. 332Grounding stud pg. 338Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32275<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Classic Series “HSW” Configuration Technical DrawingsMounting Feet Available(see page 337)CLASSIC <strong>SE</strong>RIESBack Panel Available(see page 329)Dead Front Panel Available( see page 332)Classic Series <strong>Enclosures</strong> - “HSW” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NENCLOSUREWEIGHTPANELNUMBERCL907HSW 7.21 x 9.21 x 5.09 6.59 x 8.59 x 4.84 7.71 x 5.71 4.39 6.25 4.25 6.04 4.04 4 lbs. BP-86( 183 x 234 x 129) (167 x 218 x 123) (196 x 145) (111) (159) (108) (154) (103)CL1109HSW 11.21 x 9.21 x 6.09 8.59 x 10.59 x 5.84 9.71 x 7.71 5.39 8.25 6.25 8.04 6.04 5 lbs. BP-108(285 x 234 x 155) (218 x 269 x 148) (247 x 196) (137) (210) (159) (204) (154)CL1311HSW 11.21 x 13.21 x 6.59 10.59 x 12.59 x 6.34 11.71 x 9.71 5.89 10.25 8.25 10.04 8.04 7 lbs. BP-1210(285 x 336 x 167) (269 x 320 x 161) (298 x 247) (150) (260) (210) (255) (204)CL1513HSW 13.21 x 15.21 x 7.09 12.55 x 14.55 x 6.84 13.71 x 11.71 6.39 12.25 10.25 12.04 10.04 9 lbs. BP-1412(336 x 386 x 180) (319 x 370 x 174) (348 x 298) (162) (311) (260) (306) (255)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com76
CLASSIC <strong>SE</strong>RIESTechnical Specifications - Classic SeriesHSL“HSL” configuration - Hinged on short side, through-the-door latchCLHSLConstructionMaterialGasketStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHingeHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> series stainless used throughoutPanel mounting capability for fixed rear panelAll bosses utilize threaded inserts accepting 10-32 screwsrounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisStainless steel hinge pinsCL1311HSLNOTES:HSLHSLBack PanelsIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 12NEMA 250 Type 1, 3, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Carbon Steel BP__CS pg. 329Mounting FeetORDERING INFOMounting feet CLMTGFTKIT pg. 337Special AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 326HSLModifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels pg. 332Grounding stud pg. 338Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32277<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Classic Series “HSL” Configuration Technical DrawingsMounting Feet Available(see page 337)CLASSIC <strong>SE</strong>RIESBack Panel Available(see page 329)Dead Front Panel Available( see page 332)Classic Series <strong>Enclosures</strong> - “HSL” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NENCLOSUREWEIGHTPANELNUMBERCL907HSL 7.21 x 9.21 x 5.09 6.59 x 8.59 x 4.84 7.71 x 5.71 4.39 6.25 4.25 6.04 4.04 4 lbs. BP-86(183 x 234 x 129) (167 x 218 x 123) (196 x 145) (111) (159) (108) (154) (103)CL1109HSL 9.21 x 11.21 x 6.09 8.59 x 10.59 x 5.84 9.71 x 7.71 5.39 8.25 6.25 8.04 6.04 5 lbs. BP-108(234 x 285 x 155) (218 x 269 x 148) (247 x 196) (137) (210) (159) (204) (154)CL1311HSL 11.21 x 13.21 x 6.59 10.59 x 12.59 x 6.34 11.71 x 9.71 5.89 10.25 8.25 10.04 8.04 7 lbs. BP-1210(285 x 336 x 167) (269 x 320 x 161) (298 x 247) (150) (260) (210) (255) (204)CL1513HSL 13.21 x 15.21 x 7.09 12.55 x 14.55 x 6.84 13.71 x 11.71 6.39 12.25 10.25 12.04 10.04 9 lbs. BP-1412(336 x 386 x 180) (319 x 370 x 174) (348 x 298) (162) (311) (260) (306) (255)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com78
CLASSIC <strong>SE</strong>RIESTechnical Specifications - Classic Series“HSLL” configuration - Hinged on short side, linklock latchHSLLConstructionMaterialHot compression molded fiberglass reinforced polyester (thermoset)GasketPoured polyurethane seamless gasket provides watertight,dust-tight environmental sealStainless Steel Hardware <strong>300</strong> series stainless used throughoutMounting BossesPanel mounting capability for fixed rear panelMetal insertsAll bosses utilize threaded inserts accepting 10-32 screwsSoft Edge DesignRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisHingeStainless steel hinge pinsCLCL1311HSLLNOTES:HSLLHSLLBack PanelsIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 12NEMA 250 Type 1, 3, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Carbon Steel BP__CS pg. 329Mounting FeetORDERING INFOMounting feet CLMTGFTKIT pg. 337Special AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 326HSLLModifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels pg. 332Grounding stud pg. 338Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32279<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Classic Series “HSLL” Configuration Technical DrawingsMounting Feet Available(see page 337)CLASSIC <strong>SE</strong>RIESBack Panel Available(see page 329)Dead Front Panel Available( see page 332)Classic Series <strong>Enclosures</strong> - “HSLL” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NENCLOSUREWEIGHTPANELNUMBERCL907HSLL 7.21 x 9.21 x 5.09 6.59 x 8.59 x 4.84 7.71 x 5.71 4.39 6.25 4.25 6.04 4.04 4 lbs. BP-86(183 x 234 x 129) (167 x 218 x 123) (196 x 145) (111) (159) (108) (154) (103)CL1109HSLL 9.21 x 11.21 x 6.09 8.59 x 10.59 x 5.84 9.71 x 7.71 5.39 8.25 6.25 8.04 6.04 5 lbs. BP-108(234 x 285 x 155) (218 x 269 x 148) (247 x 196) (137) (210) (159) (204) (154)CL1311HSLL 11.21 x 13.21 x 6.59 10.59 x 12.59 x 6.34 11.71 x 9.71 5.89 10.25 8.25 10.04 8.04 7 lbs. BP-1210(285 x 336 x 167) (269 x 320 x 161) (298 x 247) (150) (260) (210) (255) (204)CL1513HSLL 13.21 x 15.21 x 7.09 12.55 x 14.55 x 6.84 13.71 x 11.71 6.39 12.25 10.25 12.04 10.04 9 lbs. BP-1412(336 x 386 x 180) (319 x 370 x 174) (348 x 298) (162) (311) (260) (306) (255)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com80
CLASSIC <strong>SE</strong>RIESTechnical Specifications - Classic SeriesHSPL“HSPL” configuration - Hinged on short side, padlock latchHSPLConstructionMaterialHot compression molded fiberglass reinforced polyester (thermoset)GasketPoured polyurethane seamless gasket produces watertight,dust-tight environmental sealStainless Steel Hardware <strong>300</strong> series stainless used throughoutMounting BossesPanel mounting capability for fixed rear panelMetal insertsAll bosses utilize threaded inserts accepting 10-32 screwsSoft Edge DesignRounded edges, minimal protrusions or exposed pocket areas for theassembly of dust and debrisHingeStainless steel hinge pinsCLCL1311HSPLNOTES:HSPLHSPLBack PanelsIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 12NEMA 250 Type 1, 3, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Carbon Steel BP__CS pg. 329Mounting FeetORDERING INFOMounting feet CLMTGFTKIT pg. 337Special AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 326HSPLModifications See Special ModRight Modification on pg 315 - 322ORDERING INFORemovable dead front panels pg. 332Grounding stud pg. 338Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32281<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Classic Series “HSPL” Configuration Technical DrawingsMounting Feet Available(see page 337)CLASSIC <strong>SE</strong>RIESBack Panel Available(see page 329)Dead Front Panel Available( see page 332)Classic Series <strong>Enclosures</strong> - “HSPL” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NENCLOSUREWEIGHTPANELNUMBERCL907HSPL 7.21 x 9.21 x 5.09 6.59 x 8.59 x 4.84 7.71 x 5.71 4.39 6.25 4.25 6.04 4.04 4 lbs. BP-86(183 x 234 x 129) (167 x 218 x 123) (196 x 145) (111) (159) (108) (154) (103)CL1109HSPL 9.21 x 11.21 x 6.09 8.59 x 10.59 x 5.84 9.71 x 7.71 5.39 8.25 6.25 8.04 6.04 5 lbs. BP-108(234 x 285 x 155) (218 x 269 x 148) (247 x 196) (137) (210) (159) (204) (154)CL1311HSPL 11.21 x 13.21 x 6.59 10.59 x 12.59 x 6.34 11.71 x 9.71 5.89 10.25 8.25 10.04 8.04 7 lbs. BP-1210(285 x 336 x 167) (269 x 320 x 161) (298 x 247) (150) (260) (210) (255) (204)CL1513HSPL 13.21 x 15.21 x 7.09 12.55 x 14.55 x 6.84 13.71 x 11.71 6.39 12.25 10.25 12.04 10.04 9 lbs. BP-1412(336 x 386 x 180) (319 x 370 x 174) (348 x 298) (162) (311) (260) (306) (255)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com82
2006 p83-106 CLW 8/13/06 2:45 PM Page 83CLASSICWINDOW <strong>SE</strong>RIESThe Classic Window Series CLWThe Classic Window SeriesThe Classic Window Series enclosures are designed for electrical and electronic applications using a combination of modernstyling and high visibility windows which can be used in a multitude of ways to enhance and display key internal panels orcomponents.Designed around the maintenance free fiberglass reinforced polyester cover and base, <strong>Stahlin</strong>’s unique flush mountinstallation results in a smooth surface while minimizing edges that would otherwise accumulate dust and particles.The use of scratch and abrasion resistant acrylic results in a longer lifeand clearer visual surface over its lifetime.These enclosures enhance the appearance of any instrumentinstallation. They are especially suited for high visibility locationsfound in both industrial and commercial applications, but thechemical resistance and watertight capabilities makeIntegral Hingethem ideal across a broad spectrum of environmentalinstallations.Flush mounted windows provide the maximumFlush Mountedmechanical and environmental seal while also offeringWindowa broadly appealing cosmetic in a strong utility design.Window Featured HighlightsClassic Classic Window Series Attributes● Scratch and abrasion resistant acrylic● Flush window installation on cover● Maximum visibility to raised panels andcontrol devices● Chemically resistant combination of acrylicand fiberglass● High temperature, flame retardant, non corrosive,environmental designsClassic Series SpecificationsSeamlessPolyurethaneDoor GasketEconomicalIndustrial ToughLatch Mechanism• Padlock• Twistlock• Through-The-Door-Latch●Water tight●Light weight●UL/cUL approved●Corrosion resistant● Rated NEMA 1, 3, 4X, 12●CSA approved●Fire resistantLISTEDLISTEDThe Classic Series is Applicable for Many Industries including:OEM & custom designs MRO facilities Manufacturing facilities Pump Control Systems
2006 p83-106 CLW 8/13/06 2:46 PM Page 84CLASSICWINDOW <strong>SE</strong>RIESThe Classic Window Series● Five basic sizes● Five configurations(W, HW, HL, HLL, HPL)● Four custom configurations(HSW, HSL, HSLL, HSPL)
2006 p83-106 CLW 8/13/06 2:46 PM Page 85CLASSICWINDOW <strong>SE</strong>RIESThe Classic Series consists of four basicconcepts: screw down cover, hingedcover, screw down cover with windowand hinged cover with window. Thereare five basic sizes in the range.There are eighteen possibleconfigurations to choose from whichare all explained in detail in thefollowing pages.Classic Window SeriesClassic Series Shared CharacteristicsConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignCLWHot compression molded fiberglassreinforced polyester (thermoset)Poured polyurethane seamlessgasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless steel used onall external hardwarePanel mounting capability foroptional fixed rear panelAll bosses utilize threaded brassinserts accepting 10-32 screwsRounded edges, minimalprotrusions or exposed pocket areasfor assembly of dust and debrisPhysical CharacteristicsClassic Window Series Ordering InformationUse the information below to derive specific catalog numbers. <strong>Stahlin</strong>catalog numbers first begin with Family ID, then size ID and configurationID as a suffix. See the example below.Ordering Information - Deriving <strong>Catalog</strong> NumbersFamily ID Size ID Configuration ID EXAMPLECLW XXXX Conf. ID = “CLW707W”Classic Window Series - Inside DimensionsSize ID H x W x D Optional Panel #CLW707 6.65 x 6.65 x 4.84 BP66CLW907 8.59 x 6.59 x 4.84 BP86CLW1109 10.59 x 8.59 x 5.84 BP108CLW1311 12.59 x 10.59 x 6.34 BP1210CLW1513 14.55 x 12.55 x 6.84 BP1412Optional back panels available in various materials. See page 329Classic Window Series - ConfigurationsConfigurationIDDESCRIPTIONW4 cover screws, lift off cover configurationHWHinged, 2 cover screws configurationHLHinged, through-the-door latch configurationHLLHinged, link lock latch configurationHPLHinged, padlock latch configurationHSW* Hinged on short side, 2 cover screws configurationHSL* Hinged on short side, through-the-door latch configurationHSLL* Hinged on short side, link lock latch configurationHSPL* Hinged on short side, padlock latch configuration* All units hinged on short side are non-stock items available upon request.<strong>Non</strong> CorrosiveWater-tight/Dust-tightImpact Resistant<strong>Non</strong> ConductiveLight WeightUV ResistantWorkable MaterialEasy MaintenancePleasing AestheticsColor/FinishIndustry StandardsStands up to an exceptionally broadrange of chemical exposuresResults in an environmentallysealed, environmentally sound spaceResilient material with high impactresistanceDouble insulated material.No incidental electrical contactSolid construction in a lightweightdesignMinimizes the affects of sunlightCuts, drills, punches, and saws withease and accuracyScratches and gouges can be restoredwith a petroleum jelly productSmooth lines, soft colors easily blendinto customer’s design conceptsSmooth surface, no color variations,swirls, or color pockets, no voids.Color is Glacier GrayUL/cUL 50File E64358Type 1, 3, 4X, 12NEMA 250 Type 1, 3, 4X, 12CSA Std C22.2File LR069014Type 1, 3, 4X, 12Temperature Range(-40°F to +250°F) (-40°C to 130°C)Flammability RatingUL94-5VWindow flammabilityUL94V-0Self extinguishing<strong>Non</strong>-flame propagatingChemical ResistanceFull chemical resistance chartslisted in appendix85<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
2006 p83-106 CLW 8/13/06 2:46 PM Page 86Classic Window Series ConfigurationsW4 cover screws, lift off coverDesign Features● Lift off cover design● Stainless steel screw recessed from surface● Foot mounting kit available● Full size window opening● Scratch & abrasion resistant acrylic● Flush mount installation for maximum strengthand positive sealCLASSICWINDOW <strong>SE</strong>RIESCLW1311WHWHinged, 2 cover screwsDesign Features● Integrally hinged cover● Stainless steel screw recessed from surface● Cover secures with two screws● Full 180°+ door opening● Maximum visibility of internal panels & controls● Clear view of touchpads, read outs, and controllersCLW1311HWHLHinged, through-the-door latchDesign Features● Integrally hinged cover● Through door latch capture mechanism● Door mounted entry relieves access problems toside-mounted hardware● Full 180°+ door opening● Clear view of touchpads, read outs, and controllers● Maximum visibility of internal panels & controls● Tool operated or simple handle mechanism● Secures door with internally mounted hardwareCLW1311HL<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com86
2006 p83-106 CLW 8/13/06 2:46 PM Page 87Classic Window Series ConfigurationsCLASSICWINDOW <strong>SE</strong>RIESHLLHinged, link lock latchDesign Features●●●●●Full window opening for maximum visibilityof internal panelsLink lock latch for quick entryLatch lies flat on side of enclosureCan be lifted and turned with easeFull 180°+ door openingCLW1311HLLHPLHinged, padlock latchDesign Features● Maximum window size configuration with padlocking capability● Pad lock latch for quick entry● Snap catch concept with toggle action● Integral hasp provides secure loop for padlock (not included)● Can be lifted and released with ease● Full 180°+ door openingCLW1311HPLHSWHinged on short side, screw coverDesign Features● Hinged on short side with integral hinge● Screw recessed from surface● Cover secures with two screws● Full 180°+ door opening● Maximum visibility of internal panels & controls● Clear view of touchpads, read outs, and controllersCLW1311HSW87<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
2006 p83-106 CLW 8/13/06 2:46 PM Page 88Classic Window Series ConfigurationsHSLHinged on short side, through-the-door latchDesign Features●●●●●●●●Hinged on short side with integral hingeThrough door latch capture mechanismDoor mounted entry relieves access problems to side-mountedhardwareFull 180°+ door openingClear view of touchpads, read outs, and controllersMaximum visibility of internal panels & controlsTool operated or simple handle mechanismSecures door with internally mounted hardwareCLW1311HSLCLASSICWINDOW <strong>SE</strong>RIESHSLLHinged on short side, link lock latchDesign Features● Hinged on short side with integral hinge● Full window opening for maximum visibility of internal panels● Link lock latch for quick entry● Latch lies flat on side of enclosure● Can be lifted and turned with ease● Full 180°+ door openingCLW1311HSLLHSPLHinged on short side, padlock latchDesign Features● Hinged on short side with integral hinge● Maximum window size configuration with padlocking capability● Pad lock latch for quick entry● Snap catch concept with toggle action● Integral hasp provides secure loop for padlock (not included)● Can be lifted and released with ease● Full 180°+ door openingCLW1311HSPLBack Panels(see chart on page 329)Mounting Feet(see page 337)OptionalDead Front Panels(see page 332)<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com88
2006 p83-106 CLW 8/13/06 2:46 PM Page 89CLASSICWINDOW <strong>SE</strong>RIESWTechnical Specifications - Classic Window Series“W” configuration - 4 cover screws, lift off coverCLWCLW1311WNOTES:WWWConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignIndustry StandardsAccessoriesBack PanelsHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisUL/cUL 50 File E64358 Type 1, 3, 4X, 12NEMA 250 Type 1, 3, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Carbon Steel BP__CS pg. 329Mounting FeetORDERING INFOMounting feet CLMTGFTKIT pg. 337Special AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 326WModifications See Special ModRight Modification on pages 315 - 322ORDERING INFORemovable dead front panels pg. 332Grounding stud pg. 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32289<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
2006 p83-106 CLW 8/13/06 2:46 PM Page 90Classic Window Series “W” Configuration Technical DrawingsWCB1 1/2Mounting Feet Available(see page 337)CLASSICWINDOW <strong>SE</strong>RIESAAH M AB<strong>SE</strong>CTION B-BFBack Panel Available(see page 329)LDJEKNB<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVERDead Front Panel Available(see page 332)Classic Window Series <strong>Enclosures</strong> - “W” Configuration DimensionsSIZE ID OVERALL INSIDE WINDOW AREA MOUNTING ENCLOSURE PANELNUMBER H X W X D A X B X C [MAXIMUM] E X F J K L M N WEIGHT NUMBERCLW707W 7.21 x 7.21 x 5.09 6.65 x 6.65 x 4.84 5.06 x 5.06 5.71 x 5.71 4.39 4.25 4.25 4.04 4.04 3 lbs. BP-66(183 x 183 x 129) (169 x 169 x 123) (129 x 129) (145 x 145) (111) (108) (108) (103) (103)CLW907W 9.21 x 7.21 x 5.09 8.59 x 6.59 x 4.84 7.06 x 5.06 7.71 x 5.71 4.39 6.25 4.25 6.04 4.04 4 lbs. BP-86(234 x 183 x 129) (218 x 167 x 123) (179 x 129) (196 x 145) (111) (159) (108) (154) (103)CLW1109W 11.21 x 9.21 x 6.09 10.59 x 8.59 x 5.84 9.06 x 7.06 9.71 x 7.71 5.39 8.25 6.25 8.04 6.04 5 lbs. BP-108(285 x 234 x 155) (269 x 218 x 148) (230 x 179) (247 x 196) (137) (210) (159) (204) (154)CLW1311W 13.21 x 11.21 x 6.59 12.59 x 10.59 x 6.34 11.06 x 9.06 11.71 x 9.71 5.89 10.25 8.25 10.04 8.04 7 lbs. BP-1210(336 x 285 x 167) (320 x 269 x 161) (281 x 230) (298 x 247) (150) (260) (210) (255) (204)CLW1513W 15.21 x 13.21 x 7.09 14.55 x 12.55 x 6.84 13.06 x 11.06 13.71 x 11.71 6.39 12.25 10.25 12.04 10.04 9 lbs. BP-1412(386 x 336 x 180) (370 x 319 x 174) (332 x 281) (348 x 298) (162) (311) (260) (306) (255)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com90
2006 p83-106 CLW 8/13/06 2:46 PM Page 91CLASSICWINDOW <strong>SE</strong>RIESHWTechnical Specifications - Classic Window Series“HW” configuration - Hinged, 2 cover screwsCLWHW ConstructionMaterialGasketRecessed screwsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisCLW1311HWNOTES:HWIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 12NEMA 250 Type 1, 3, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixHWBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Carbon Steel BP__CS pg. 329Mounting FeetORDERING INFOMounting feet CLMTGFTKIT pg. 337Special AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 326HWModifications See Special ModRight Modification on pages 315 - 322ORDERING INFORemovable dead front panels pg. 332Grounding stud pg. 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32291<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
2006 p83-106 CLW 8/13/06 2:46 PM Page 92Classic Window Series “HW” Configuration Technical DrawingsWCB1 1/2Mounting Feet Available(see page 337)CLASSICWINDOW <strong>SE</strong>RIESAAH M AB<strong>SE</strong>CTION B-BFBack Panel Available(see page 329)LDJEKNB<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVERDead Front Panel Available(see page 332)Classic Window Series <strong>Enclosures</strong> - “HW” Configuration DimensionsSIZE ID OVERALL INSIDE WINDOW AREA MOUNTING ENCLOSURE PANELNUMBER H X W X D A X B X C [MAXIMUM] E X F J K L M N WEIGHT NUMBERCLW707HW 7.21 x 7.21 x 5.09 6.65 x 6.65 x 4.84 5.06 x 5.06 5.71 x 5.71 4.39 4.25 4.25 4.04 4.04 3 lbs. BP-66(183 x 183 x 129) (169 x 169 x 123) (129 x 129) (145 x 145) (111) (108) (108) (103) (103)CLW907HW 9.21 x 7.21 x 5.09 8.59 x 6.59 x 4.84 7.06 x 5.06 7.71 x 5.71 4.39 6.25 4.25 6.04 4.04 4 lbs. BP-86(234 x 183 x 129) (218 x 167 x 123) (179 x 129) (196 x 145) (111) (159) (108) (154) (103)CLW1109HW 11.21 x 9.21 x 6.09 10.59 x 8.59 x 5.84 9.06 x 7.06 9.71 x 7.71 5.39 8.25 6.25 8.04 6.04 5 lbs. BP-108(285 x 234 x 155) (269 x 218 x 148) (230 x 179) (247 x 196) (137) (210) (159) (204) (154)CLW1311HW 13.21 x 11.21 x 6.59 12.59 x 10.59 x 6.34 11.06 x 9.06 11.71 x 9.71 5.89 10.25 8.25 10.04 8.04 7 lbs. BP-1210(336 x 285 x 167) (320 x 269 x 161) (281 x 230) (298 x 247) (150) (260) (210) (255) (204)CLW1513HW 15.21 x 13.21 x 7.09 14.55 x 12.55 x 6.84 13.06 x 11.06 13.71 x 11.71 6.39 12.25 10.25 12.04 10.04 9 lbs. BP-1412(386 x 336 x 180) (370 x 319 x 174) (332 x 281) (348 x 298) (162) (311) (260) (306) (255)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com92
2006 p83-106 CLW 8/13/06 2:46 PM Page 93CLASSICWINDOW <strong>SE</strong>RIESHLTechnical Specifications - Classic Window Series“HL” configuration - Hinged, through-the-door latchCLWHL ConstructionMaterialGasketStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisNOTES:CLW1311HLHLHLAccessoriesBack PanelsIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 12NEMA 250 Type 1, 3, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Carbon Steel BP__CS pg. 329Mounting FeetORDERING INFOMounting feet CLMTGFTKIT pg. 337Special AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 326HLModifications See Special ModRight Modification on pages 315 - 322ORDERING INFORemovable dead front panels pg. 332Grounding stud pg. 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32293<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
2006 p83-106 CLW 8/13/06 2:46 PM Page 94Classic Window Series “HL” Configuration Technical DrawingsWCB1 1/2Mounting Feet Available(see page 337)CLASSICWINDOW <strong>SE</strong>RIESAAH M AB<strong>SE</strong>CTION B-BFBack Panel Available(see page 329)LDJEKNB<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVERDead Front Panel Available(see page 332)Classic Window Series <strong>Enclosures</strong> - “HL” Configuration DimensionsSIZE ID OVERALL INSIDE WINDOW AREA MOUNTING ENCLOSURE PANELNUMBER H X W X D A X B X C [MAXIMUM] E X F J K L M N WEIGHT NUMBERCLW707HL 7.21 x 7.21 x 5.09 6.65 x 6.65 x 4.84 5.06 x 5.06 5.71 x 5.71 4.39 4.25 4.25 4.04 4.04 3 lbs. BP-66(183 x 183 x 129) (169 x 169 x 123) (129 x 129) (145 x 145) (111) (108) (108) (103) (103)CLW907HL 9.21 x 7.21 x 5.09 8.59 x 6.59 x 4.84 7.06 x 5.06 7.71 x 5.71 4.39 6.25 4.25 6.04 4.04 4 lbs. BP-86(234 x 183 x 129) (218 x 167 x 123) (179 x 129) (196 x 145) (111) (159) (108) (154) (103)CLW1109HL 11.21 x 9.21 x 6.09 10.59 x 8.59 x 5.84 9.06 x 7.06 9.71 x 7.71 5.39 8.25 6.25 8.04 6.04 5 lbs. BP-108(285 x 234 x 155) (269 x 218 x 148) (230 x 179) (247 x 196) (137) (210) (159) (204) (154)CLW1311HL 13.21 x 11.21 x 6.59 12.59 x 10.59 x 6.34 11.06 x 9.06 11.71 x 9.71 5.89 10.25 8.25 10.04 8.04 7 lbs. BP-1210(336 x 285 x 167) (320 x 269 x 161) (281 x 230) (298 x 247) (150) (260) (210) (255) (204)CLW1513HL 15.21 x 13.21 x 7.09 14.55 x 12.55 x 6.84 13.06 x 11.06 13.71 x 11.71 6.39 12.25 10.25 12.04 10.04 9 lbs. BP-1412(386 x 336 x 180) (370 x 319 x 174) (332 x 281) (348 x 298) (162) (311) (260) (306) (255)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com94
2006 p83-106 CLW 8/13/06 2:46 PM Page 95CLASSICWINDOW <strong>SE</strong>RIESTechnical Specifications - Classic Window SeriesHLL“HLL” configuration - Hinged, linklock latchCLWHLL ConstructionMaterialGasketStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisCLW1311HLLNOTES:HLLIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 12NEMA 250 Type 1, 3, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixHLLBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Carbon Steel BP__CS pg. 329Mounting FeetORDERING INFOMounting feet CLMTGFTKIT pg. 337Special AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 326HLLModifications See Special ModRight Modification on pages 315 - 322ORDERING INFORemovable dead front panels pg. 332Grounding stud pg. 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32295<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
2006 p83-106 CLW 8/13/06 2:46 PM Page 96Classic Window Series “HLL” Configuration Technical DrawingsWCB1 1/2Mounting Feet Available(see page 337)CLASSICWINDOW <strong>SE</strong>RIESAAH M AB<strong>SE</strong>CTION B-BFBack Panel Available(see page 329)LDJEKNB<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVERDead Front Panel Available(see page 332)Classic Window Series <strong>Enclosures</strong> - “HLL” Configuration DimensionsSIZE ID OVERALL INSIDE WINDOW AREA MOUNTING ENCLOSURE PANELNUMBER H X W X D A X B X C [MAXIMUM] E X F J K L M N WEIGHT NUMBERCLW707HLL 7.21 x 7.21 x 5.09 6.65 x 6.65 x 4.84 5.06 x 5.06 5.71 x 5.71 4.39 4.25 4.25 4.04 4.04 3 lbs. BP-66(183 x 183 x 129) (169 x 169 x 123) (129 x 129) (145 x 145) (111) (108) (108) (103) (103)CLW907HLL 9.21 x 7.21 x 5.09 8.59 x 6.59 x 4.84 7.06 x 5.06 7.71 x 5.71 4.39 6.25 4.25 6.04 4.04 4 lbs. BP-86(234 x 183 x 129) (218 x 167 x 123) (179 x 129) (196 x 145) (111) (159) (108) (154) (103)CLW1109HLL 11.21 x 9.21 x 6.09 10.59 x 8.59 x 5.84 9.06 x 7.06 9.71 x 7.71 5.39 8.25 6.25 8.04 6.04 5 lbs. BP-108(285 x 234 x 155) (269 x 218 x 148) (230 x 179) (247 x 196) (137) (210) (159) (204) (154)CLW1311HLL 13.21 x 11.21 x 6.59 12.59 x 10.59 x 6.34 11.06 x 9.06 11.71 x 9.71 5.89 10.25 8.25 10.04 8.04 7 lbs. BP-1210(336 x 285 x 167) (320 x 269 x 161) (281 x 230) (298 x 247) (150) (260) (210) (255) (204)CLW1513HLL 15.21 x 13.21 x 7.09 14.55 x 12.55 x 6.84 13.06 x 11.06 13.71 x 11.71 6.39 12.25 10.25 12.04 10.04 9 lbs. BP-1412(386 x 336 x 180) (370 x 319 x 174) (332 x 281) (348 x 298) (162) (311) (260) (306) (255)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com96
2006 p83-106 CLW 8/13/06 2:46 PM Page 97CLASSICWINDOW <strong>SE</strong>RIESTechnical Specifications - Classic Window SeriesHPL“HPL” configuration - Hinged, padlock latchCLWHPL ConstructionMaterialGasketStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisCLW1311HPLNOTES:HPLHPLBack PanelsIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 12NEMA 250 Type 1, 3, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Carbon Steel BP__CS pg. 329Mounting FeetORDERING INFOMounting feet CLMTGFTKIT pg. 337Special AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 326HPLModifications See Special ModRight Modification on pages 315 - 322ORDERING INFORemovable dead front panels pg. 332Grounding stud pg. 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32297<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
2006 p83-106 CLW 8/13/06 2:46 PM Page 98Classic Window Series “HPL” Configuration Technical DrawingsWCB1 1/2Mounting Feet Available(see page 337)CLASSICWINDOW <strong>SE</strong>RIESAAH M AB<strong>SE</strong>CTION B-BFBack Panel Available(see page 329)LDJEKNB<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVERDead Front Panel Available(see page 332)Classic Window Series <strong>Enclosures</strong> - “HPL” Configuration DimensionsSIZE ID OVERALL INSIDE WINDOW AREA MOUNTING ENCLOSURE PANELNUMBER H X W X D A X B X C [MAXIMUM] E X F J K L M N WEIGHT NUMBERCLW707HPL 7.21 x 7.21 x 5.09 6.65 x 6.65 x 4.84 5.06 x 5.06 5.71 x 5.71 4.39 4.25 4.25 4.04 4.04 3 lbs. BP-66(183 x 183 x 129) (169 x 169 x 123) (129 x 129) (145 x 145) (111) (108) (108) (103) (103)CLW907HPL 9.21 x 7.21 x 5.09 8.59 x 6.59 x 4.84 7.06 x 5.06 7.71 x 5.71 4.39 6.25 4.25 6.04 4.04 4 lbs. BP-86(234 x 183 x 129) (218 x 167 x 123) (179 x 129) (196 x 145) (111) (159) (108) (154) (103)CLW1109HPL 11.21 x 9.21 x 6.09 10.59 x 8.59 x 5.84 9.06 x 7.06 9.71 x 7.71 5.39 8.25 6.25 8.04 6.04 5 lbs. BP-108(285 x 234 x 155) (269 x 218 x 148) (230 x 179) (247 x 196) (137) (210) (159) (204) (154)CLW1311HPL 13.21 x 11.21 x 6.59 12.59 x 10.59 x 6.34 11.06 x 9.06 11.71 x 9.71 5.89 10.25 8.25 10.04 8.04 7 lbs. BP-1210(336 x 285 x 167) (320 x 269 x 161) (281 x 230) (298 x 247) (150) (260) (210) (255) (204)CLW1513HPL 15.21 x 13.21 x 7.09 14.55 x 12.55 x 6.84 13.06 x 11.06 13.71 x 11.71 6.39 12.25 10.25 12.04 10.04 9 lbs. BP-1412(386 x 336 x 180) (370 x 319 x 174) (332 x 281) (348 x 298) (162) (311) (260) (306) (255)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com98
2006 p83-106 CLW 8/13/06 2:46 PM Page 99CLASSICWINDOW <strong>SE</strong>RIESTechnical Specifications - Classic Window Series“HSW” configuration - Hinged on short side, screw coverCLWHSW ConstructionMaterialGasketRecessed screwsStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisCLW1311HSWNOTES:HSWIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 12NEMA 250 Type 1, 3, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixHSWBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Carbon Steel BP__CS pg. 329Mounting FeetORDERING INFOMounting feet CLMTGFTKIT pg. 337Special AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 326HSWModifications See Special ModRight Modification on pages 315 - 322ORDERING INFORemovable dead front panels pg. 332Grounding stud pg. 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 32299<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
2006 p83-106 CLW 8/13/06 2:46 PM Page 100Classic Window Series “HSW” Configuration Technical DrawingsMounting Feet Available(see page 337)CLASSICWINDOW <strong>SE</strong>RIESBack Panel Available(see page 329)Dead Front Panel Available(see page 332)Classic Window Series <strong>Enclosures</strong> - “HSW” Configuration DimensionsSIZE ID OVERALL INSIDE WINDOW AREA MOUNTING ENCLOSURE PANELNUMBER H X W X D A X B X C [MAXIMUM] E X F J K L M N WEIGHT NUMBERCLW907HSW 7.21 x 9.21 x 5.09 6.59 x 8.59 x 4.84 7.06 x 5.06 7.71 x 5.71 4.39 6.25 4.25 6.04 4.04 4 lbs. BP-86(183 x 234 x 129) (167 x 218 x 123) (179 x 129) (196 x 145) (111) (159) (108) (154) (103)CLW1109HSW 9.21 x 11.21 x 6.09 8.59 x 10.59 x 5.84 9.06 x 7.06 9.71 x 7.71 5.39 8.25 6.25 8.04 6.04 5 lbs. BP-108(234 x 285 x 155) (218 x 269 x 148) (230 x 179) (247 x 196) (137) (210) (159) (204) (154)CLW1311HSW 11.21 x 13.21 x 6.59 10.59 x 12.59 x 6.34 11.06 x 9.06 11.71 x 9.71 5.89 10.25 8.25 10.04 8.04 7 lbs. BP-1210(285 x 336 x 167) (269 x 320 x 161) (281 x 230) (298 x 247) (150) (260) (210) (255) (204)CLW1513HSW 13.21 x 15.21 x 7.09 12.55 x 14.55 x 6.84 13.06 x 11.06 13.71 x 11.71 6.39 12.25 10.25 12.04 10.04 9 lbs. BP-1412(336 x 386 x 180) (319 x 370 x 174) (332 x 281) (348 x 298) (162) (311) (260) (306) (255)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com100
2006 p83-106 CLW 8/13/06 2:46 PM Page 101CLASSICWINDOW <strong>SE</strong>RIESTechnical Specifications - Classic Window SeriesHSL“HSL” configuration - Hinged on short side, through-the-door latchCLWHSL ConstructionMaterialGasketStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisNOTES:CLW1311HSLHSLHSLBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Carbon Steel BP__CS pg. 329Mounting FeetIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 12NEMA 250 Type 1, 3, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixORDERING INFOMounting feet CLMTGFTKIT pg. 337Special AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 326HSLModifications See Special ModRight Modification on pages 315 - 322ORDERING INFORemovable dead front panels pg. 332Grounding stud pg. 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 322101<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
2006 p83-106 CLW 8/13/06 2:46 PM Page 102Classic Window Series “HSL” Configuration Technical DrawingsMounting Feet Available(see page 337)CLASSICWINDOW <strong>SE</strong>RIESBack Panel Available(see page 329)Dead Front Panel Available(see page 332)Classic Window Series <strong>Enclosures</strong> - “HSL” Configuration DimensionsSIZE ID OVERALL INSIDE WINDOW AREA MOUNTING ENCLOSURE PANELNUMBER H X W X D A X B X C [MAXIMUM] E X F J K L M N WEIGHT NUMBERCLW907HSL 7.21 x 9.21 x 5.09 6.59 x 8.59 x 4.84 7.06 x 5.06 7.71 x 5.71 4.39 6.25 4.25 6.04 4.04 4 lbs. BP-86(183 x 234 x 129) (167 x 218 x 123) (179 x 129) (196 x 145) (111) (159) (108) (154) (103)CLW1109HSL 9.21 x 11.21 x 6.09 8.59 x 10.59 x 5.84 9.06 x 7.06 9.71 x 7.71 5.39 8.25 6.25 8.04 6.04 5 lbs. BP-108(234 x 285 x 155) (218 x 269 x 148) (230 x 179) (247 x 196) (137) (210) (159) (204) (154)CLW1311HSL 11.21 x 13.21 x 6.59 10.59 x 12.59 x 6.34 11.06 x 9.06 11.71 x 9.71 5.89 10.25 8.25 10.04 8.04 7 lbs. BP-1210(285 x 336 x 167) (269 x 320 x 161) (281 x 230) (298 x 247) (150) (260) (210) (255) (204)CLW1513HSL 13.21 x 15.21 x 7.09 12.55 x 14.55 x 6.84 13.06 x 11.06 13.71 x 11.71 6.39 12.25 10.25 12.04 10.04 9 lbs. BP-1412(336 x 386 x 180) (319 x 370 x 174) (332 x 281) (348 x 298) (162) (311) (260) (306) (255)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com102
2006 p83-106 CLW 8/13/06 2:46 PM Page 103CLASSICWINDOW <strong>SE</strong>RIESTechnical Specifications - Classic Window Series“HSLL” configuration - Hinged on short side, linklock latchCLWHSLL ConstructionMaterialGasketStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisCLW1311HSLLNOTES:HSLLHSLLBack PanelsIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 12NEMA 250 Type 1, 3, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Carbon Steel BP__CS pg. 329Mounting FeetORDERING INFOMounting feet CLMTGFTKIT pg. 337Special AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 326HSLLModifications See Special ModRight Modification on pages 315 - 322ORDERING INFORemovable dead front panels pg. 332Grounding stud pg. 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 322103<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
2006 p83-106 CLW 8/13/06 2:47 PM Page 104Classic Window Series “HSLL” Configuration Technical DrawingsMounting Feet Available(see page 337)CLASSICWINDOW <strong>SE</strong>RIESBack Panel Available(see page 329)Dead Front Panel Available(see page 332)Classic Window Series <strong>Enclosures</strong> - “HSLL” Configuration DimensionsSIZE ID OVERALL INSIDE WINDOW AREA MOUNTING ENCLOSURE PANELNUMBER H X W X D A X B X C [MAXIMUM] E X F J K L M N WEIGHT NUMBERCLW907HSLL 7.21 x 9.21 x 5.09 6.59 x 8.59 x 4.84 7.06 x 5.06 7.71 x 5.71 4.39 6.25 4.25 6.04 4.04 4 lbs. BP-86(183 x 234 x 129) (167 x 218 x 123) (179 x 129) (196 x 145) (111) (159) (108) (154) (103)CLW1109HSLL 9.21 x 11.21 x 6.09 8.59 x 10.59 x 5.84 9.06 x 7.06 9.71 x 7.71 5.39 8.25 6.25 8.04 6.04 5 lbs. BP-108(234 x 285 x 155) (218 x 269 x 148) (230 x 179) (247 x 196) (137) (210) (159) (204) (154)CLW1311HSLL 11.21 x 13.21 x 6.59 10.59 x 12.59 x 6.34 11.06 x 9.06 11.71 x 9.71 5.89 10.25 8.25 10.04 8.04 7 lbs. BP-1210(285 x 336 x 167) (269 x 320 x 161) (281 x 230) (298 x 247) (150) (260) (210) (255) (204)CLW1513HSLL 13.21 x 15.21 x 7.09 12.55 x 14.55 x 6.84 13.06 x 11.06 13.71 x 11.71 6.39 12.25 10.25 12.04 10.04 9 lbs. BP-1412(336 x 386 x 180) (319 x 370 x 174) (332 x 281) (348 x 298) (162) (311) (260) (306) (255)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com104
2006 p83-106 CLW 8/13/06 2:47 PM Page 105CLASSICWINDOW <strong>SE</strong>RIESTechnical Specifications - Classic Window Series“HSPL” configuration - Hinged on short side, padlock latchCLWHSPL ConstructionMaterialGasketStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisCLW1311HSPLNOTES:HSPLIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4x, 12NEMA 250 Type 1, 3, 4x, 12CSA Std C22.2 File LR069014 Type 1, 3, 4x, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixHSPLBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Carbon Steel BP__CS pg. 329Mounting FeetORDERING INFOMounting feet CLMTGFTKIT pg. 337Special AccessoriesVent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK10956 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and five assorted ranges pg. 327, 328cord grips(includes rigid & flex)Vapor capsule VC2-1 pg. 326HSPLModifications See Special ModRight Modification on pages 315 - 322ORDERING INFORemovable dead front panels pg. 332Grounding stud pg. 339Custom painting pg. 315 - 322Molded in color pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom Blending pg. 315 - 322105<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
2006 p83-106 CLW 8/13/06 2:47 PM Page 106Classic Window Series ConfigurationsMounting Feet Available(see page 337)CLASSICWINDOW <strong>SE</strong>RIESBack Panel Available(see page 329)Dead Front Panel Available(see page 332)Classic Window Series <strong>Enclosures</strong> - “HSPL” Configuration DimensionsSIZE ID OVERALL INSIDE WINDOW AREA MOUNTING ENCLOSURE PANELNUMBER H X W X D A X B X C [MAXIMUM] E X F J K L M N WEIGHT NUMBERCLW907HSPL 7.21 x 9.21 x 5.09 6.59 x 8.59 x 4.84 7.06 x 5.06 7.71 x 5.71 4.39 6.25 4.25 6.04 4.04 4 lbs. BP-86(183 x 234 x 129) (167 x 218 x 123) (179 x 129) (196 x 145) (111) (159) (108) (154) (103)CLW1109HSPL 9.21 x 11.21 x 6.09 8.59 x 10.59 x 5.84 9.06 x 7.06 9.71 x 7.71 5.39 8.25 6.25 8.04 6.04 5 lbs. BP-108(234 x 285 x 155) (218 x 269 x 148) (230 x 179) (247 x 196) (137) (210) (159) (204) (154)CLW1311HSPL 11.21 x 13.21 x 6.59 10.59 x 12.59 x 6.34 11.06 x 9.06 11.71 x 9.71 5.89 10.25 8.25 10.04 8.04 7 lbs. BP-1210(285 x 336 x 167) (269 x 320 x 161) (281 x 230) (298 x 247) (150) (260) (210) (255) (204)CLW1513HSPL 13.21 x 15.21 x 7.09 12.55 x 14.55 x 6.84 13.06 x 11.06 13.71 x 11.71 6.39 12.25 10.25 12.04 10.04 9 lbs. BP-1412(336 x 386 x 180) (319 x 370 x 174) (332 x 281) (348 x 298) (162) (311) (260) (306) (255)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com106
The “J” SeriesJJ <strong>SE</strong>RIESThe “J” SeriesThe “J” Series enclosures follow the original design of fiberglass enclosure products featuring a modest overhang cover on aflange mounted base. This simple but elegant concept offers unobstructed side-walls, built in mounting capabilities and thestrength characteristics associated with a protective wrap around cover that is hinged, latched or screwed down.<strong>Stahlin</strong>'s “J” series enclosures are designed for general electrical and electronic applications and any application that hasassociated environmental concerns. Simple in its design, the enclosure can be configured with cutouts, windows andmodifications that make your finished product truly unique.“J” series products enhance any instrument installation. They accommodatestandard back panel mounting but offer a range of panels, including anelevated dead front panel that is highly visible through a covermounted window. This is a smaller and slightly shallower seriesIntegral Mounting Flangeof product than the Classic series. If extra depth is required,the series offers a “raised cover” that increases depth bySeamlessadding to the depth of the cover.PolyurethaneDoor GasketThis feature can be particularly effective with covermounted components. There is a multitude of variationsavailable in this simple but elegant design.EconomicalFeatured HighlightsSeries “J” “J” Series Attributes●●●●●●●Overhang cover on smooth sided baseSoft rounded radius on base lipAll stainless hardware latches and screwsFull length stainless steel hingeChemically resistant fiberglass reinforced polyesterSubmersible, non corrosive, environmental designsStainless steel retention chain on screw covers“J” Series SpecificationsSolid ConstructionCompression Molded,Fiberglass ReinforcedPolyesterIndustrial ToughModest Overhang CoverLatch Mechanism• Padlock Latch• Link Lock Latch●Water tight●Fire resistant●UL/cUL approved●Submersible●Light weight●CSA approved●Corrosion Resistant● Rated NEMA 1, 3, 4X, 6P, 12LISTEDLISTEDThe “J” Series is Applicable for Many Industries including:OEM &instrumentation designs MRO facilities Poultry FarmsMarine & Marinainstallations
J <strong>SE</strong>RIESThe “J” Series● Twelve basic sizes● Four basic concepts● Seven configurations(W, HW, HLL, HPL, FHW, FHLL, FHPL)
The “J” SeriesJJ <strong>SE</strong>RIESThe “J” Series Family consists of fourbasic concepts: screw down cover,hinged cover with screw down, atwistlock latch and a padlocklatch. There are twelve basicsizes in the range. Additionally,the 10 x 8 size has a specialcover configuration describedas a “crown cover” which addsa small additional depth to theenclosure by offering aslightly deeper cover. Simplescrew down cover styleenclosures employ anindustry exclusive stainlesssteel retention chain.Each ofthese configurations is equally at home in aggressiveenvironments or high profile commercial installations.“J” Series Shared CharacteristicsConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglassreinforced polyesterPoured polyurethane seamlessgasket provides watertight, dust-tightenvironmental sealNo protruding surfaces<strong>300</strong> Series stainless used on allexternal hardwareIntegral flange molded in place forease of mounting.Panel mounting capability forfixed rear panelAll bosses utilize threaded brass insertsaccepting 10-32 screwsRounded edges, minimal protrusions orexposed pocket areas for assembly ofdust and debris“J” Series Ordering InformationUse the information below to derive specific catalog numbers. <strong>Stahlin</strong>catalog numbers first begin with Family ID, then size ID and configurationID as a suffix. See the example below.Ordering Information - Deriving <strong>Catalog</strong> NumbersFamily ID Size ID Configuration ID EXAMPLEJ XXXX Conf. ID = “J604W”“J” Series - Inside DimensionsSize ID H x W x D Optional Panel #J604 5.84 x 3.85 x 4.45 BP64J606 5.72 x 5.72 x 4.45 BP66J806 7.73 x 5.74 x 4.45 BP86J808 7.73 x 7.73 x 4.82 BP88J1008* 9.73 x 7.73 x 3.98 BP108J1210 11.79 x 9.80 x 4.94 BP1210J1212 11.70 x 11.70 x 6.29 BP1212J1407 14.00 x 7.00 x 6.56 BP1407J1412 13.53 x 11.55 x 5.94 BP1412J1614 15.63 x 13.60 x 5.94 BP1614J1816 17.69 x 15.69 x 8.45 BP1816J2016 19.72 x 15.72 x 8.45 BPJ2016Optional back panels available in various materials. See page 329 - 330*Size 1008 available with crowned cover. Details on the following pages.“J” Series - ConfigurationsConfigurationIDDESCRIPTIONW4 cover screws, lift off cover configurationHWHinged, 2 cover screws configurationHLL Hinged, link lock latch configurationHPL Hinged, padlock latch configurationFHW Fiberglass hinged, 4 cover screws configurationFHLLFiberglass hinged, flush mounted window, link lock latch config.FHPL Fiberglass hinged, flush mounted window, padlock latch config.Physical Characteristics<strong>Non</strong> corrosiveWater-tightDust-tightImpact resistant<strong>Non</strong> ConductiveLight weightUV resistantWorkable materialEasy maintenancePleasing aestheticsColor/FinishColor Guard rangeIndustry StandardsStands up to an exceptionally broadrange of chemical exposuresRated watertight and submersible for aprolonged periodResults in an environmentally sealed,environmentally sound spaceResilient material with high impactresistanceDouble insulated material. No incidentalelectrical contactSolid construction in a lightweightdesignMinimizes the affects of sunlightCuts, drills, punches, and saws withease and accuracyScratches and gouges can be restoredwith a petroleum jelly productSmooth lines, soft colors easily blendinto customer’s design conceptsSmooth surface, no color variations,swirls, or color pockets, no voids.Color described as Glacier GrayAvailable from stock in Red, White, andYellow. Consult factory for details.UL/cUL 50File E64358Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2File LR069014Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow flammability UL94V-0Self extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed inappendix109<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“J” Series Configurationscontinued on following pagesW4 cover screws, lift off coverDesign Features● Lift off cover design● Surface flat stainless steel screw● Integral mounting flange● Soft rounded edges● Overhang cover● Stainless steel beaded cover retention chainJ <strong>SE</strong>RIESJ1210WHWHinged, 2 cover screwsDesign Features● Full length stainless steel hinged cover● Surface flat stainless steel screws● Full 180°+ door opening● Crown cover available in 10 x 8 configuration onlyJ1008HWHLLHinged, link lock latchDesign Features● Link lock latch for quick entry● Latch lies flat on side of enclosure● Can be lifted and turned with ease● Full 180°+ door openingJ1210HLL<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com110
“J” Series ConfigurationsHPLHinged, padlock latchJ <strong>SE</strong>RIESDesign Features● Padlock latch for quick entry● Snap catch concept with toggle action● Integral hasp provides secure loop for padlock (padlock not included)● Can be lifted and released with ease● Full 180°+ door openingJ1210HPLFHWFiberglass hinged, four cover screwsDesign Features● Fiberglass hinge provides maximum corrosion resistance● Surface flat stainless steel screws● Crown cover available on 10x8 configuration● Full 180°+ door openingJ1210FHWFHLLFiberglass hinged, flush mounted window, link lock latchDesign Features● Fiberglass hinge for maximum corrosion resistance● Removable lift off cover capability● Link lock latch mechanism for easy entry● Full 180°+ door openingJ1008FHLL111<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“J” Series ConfigurationsFHPLFiberglass hinged, flush bonded window, padlock latchDesign Features● Fiberglass hinge for maximum corrosion resistance● Removable lift off cover capability● Padlock latch for quick entry and added security● Full 180°+ door openingJ <strong>SE</strong>RIES“STAHLIN INFORMATION CENTER”<strong>Stahlin</strong>’s "J" Series includes a hybrid design using aslightly elevated cover called a "crown cover".It’s purpose is to create a slightly greater overall depthdimension by increasing the depth of the cover.This design is available in a 10x8 size only andcomplements all the standard configurationsincluding: screw down, padlock or twist lock latched,non metallic hinged and windowed versions.The crown cover is a designer favorite for its uniqueshape as well as the utility of its extra depth.Crowned Cover <strong>Catalog</strong> Numbers<strong>Catalog</strong> # Description PageJ1008WA Crowned Cover, 4 cover screws, lift off cover 114J1008HWA Crowned Cover, Hinged, 2 cover screws 116J1008HALL Crowned Cover, Hinged, link lock latch 118J1008HAPL Crowned Cover, Hinged, padlock latch 120J1008FHWA Crowned Cover, Fiberglass hinged, 4 cover screws 122J1008FHALL Crowned Cover, Fiberglass hinged, link lock latch 124J1008FHAPL Crowned Cover, Fiberglass hinged, padlock latch 126J Series Crowned Covered technical data is covered in greater detail on theappropriate configuration page.Crowned CoverStandard CoverJ1008HWACrowned CoverJ1008HWStandard Flat CoverCrowned cover offers 3/4" more in depth thanthe standard Flat cover.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com112
WTechnical Specifications - “J” Series“W” configuration - 4 cover screws, lift off coverJJ <strong>SE</strong>RIESWConstructionMaterialGasketPan head screwsStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsSoft Edge DesignCover retention chainHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealMinimizes protruding surfaces<strong>300</strong> Series stainless used on all external hardwareMolded in flange for ease of mounting.Panel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisStainless steel beaded chain for securing cover after lift offJ1210WNOTES:WWIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 322Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326WModifications See Special ModRight Modification pg 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322113<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“J” Series “W” Configuration Technical DrawingsWStandard Flat CoverCrowned CoverFBHOLE DIA.4 PLC'S.CCAEHCrowned CoverAvailable in 1008sizes onlyAEHJ <strong>SE</strong>RIESNAAMM<strong>SE</strong>CTION B-BBLBack Panel Available(see page 329)JBDK<strong>SE</strong>CTION A-A“J” Series <strong>Enclosures</strong> - “W” Configuration DimensionsFRONT VIEWWITHOUT COVERSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJ 604W 7.50 x 5.43 x 4.75 5.84 x 3.85 x 4.45 6.75 x 2 4 4.25 2.25 0.25 7.39 0.31 2.5 lbs. BP-64(191 x 138 x 121) (148 x 98 x 113) (171 x 51) (101) (108) (57) (6) (188) (8)J 606W 7.50 x 7.50 x 4.75 5.72 x 5.72 x 4.45 6.75 x 4 4 4.25 4.25 0.25 7.52 0.31 2.75 lbs. BP-66(191 x 191 x 121) (145 x 145 x 113) (171 x 101) (101) (108) (108) (6) (191) (8)J 806W 9.62 x 7.50 x 4.74 7.73 x 5.74 x 4.45 8.88 x 4 4 6.25 4.25 0.25 9.5 0.31 3.5 lbs. BP-86(244 x 191 x 121) (196 x 146 x 113) (225 x 101) (101) (159) (108) (6) (242) (8)J808W 9.56 x 9.38 x 4.89 7.73 x 7.73 x 4.64 8.75 x 6.00 4.06 6.25 6.25 0.25 9.37 0.31 1.71 lbs. BP-88(243 x 238 x 124) (196 x 196 x 118) (222 x 152) (103) (159) (159) (6) (238) (8)J 1008W 11.62 x 9.41 x 4.25 9.73 x 7.73 x 3.98 10.75 x 6 3.5 8.25 6.25 0.25 11.35 0.31 5 lbs. BP-108(295 x 239 x 108) (247 x 196 x 101) (273 x 152) (89) (209) (159) (6) (288) (8)J 1008WA* 11.62 x 9.37 x 5.06 9.73 x 7.73 x 4.83 10.75 x 6 4.37 8.25 6.25 0.25 11.37 0.31 5 lbs. BP-108Crowned Cover (295 x 238 x 129) (247 x 196 x 123) (273 x 152) (111) (209) (159) (6) (289) (8)J 1210W 13.56 x 11.43 x 5.21 11.79 x 9.80 x 4.94 12.75 x 8 4.5 10.25 8.25 0.25 13.41 0.31 6.5 lbs. BP-1210(344 x 291 x 132) (299 x 249 x 125) (324 x 203) (114) (260) (209) (6) (341) (8)J1212W 13.56 x 13.38 x 6.36 11.70 x 11.70 x 6.11 12.75 x 10.00 5.53 10.25 10.25 0.25 13.38 0.31 3.20 lbs. BP-1212(344 x 340 x 161) (297 x 297 x 155) (324 x 254) (140) (260) (260) (6) (340) (8)J 1407W 15.87 x 8.75 x 6.81 14.00 x 7.00 x 6.56 15 x 5 6.12 12.25 5.25 0.25 15.75 0.31 6.25 lbs. BP-1407(403 x 222 x 173) (356 x 178 x 167) (381 x 127) (156) (311) (133) (6) (400) (8)J 1412W 15.50 x 13.50 x 6.25 13.53 x 11.55 x 5.94 14.62 x 10 5.37 12.25 10.25 0.25 15.47 0.31 8.5 lbs. BP-1412(394 x 343 x 159) (344 x 293 x 151) (371 x 254) (137) (311) (260) (6) (393) (8)J 1614W 17.53 x 15.46 x 6.23 15.63 x 13.60 x 5.94 16.75 x 12 5.36 14.25 12.25 0.25 17.45 0.31 11.5 lbs. BP-1614(445 x 393 x 158) (397 x 345 x 151) (425 x 305) (136) (362) (311) (6) (443) (8)J 1816W 19.62 x 17.61 x 8.82 17.69 x 15.69 x 8.45 18.88 x 12 7.99 16.25 14.25 0.25 19.61 0.31 19.25 lbs. BP-1816(498 x 447 x 224) (449 x 399 x 215) (479 x 305) (203) (413) (362) (6) (498) (8)J 2016W 22.00 x 17.68 x 8.83 19.72 x 15.72 x 8.45 21.25 x 10.00 8 18.25 14.25 0.25 21.68 0.31 20.25 BPJ2016(559 x 449 x 224) (501 x 399 x 215) (540 x 254) (203) (464) (362) (6) (551) (8)All measures are in inches, items in parentheses are in millimeters.*Crowned cover – center of cover raised 3/4"<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com114
HWTechnical Specifications - “J” Series“HW” configuration - Hinged, 2 cover screwsJJ <strong>SE</strong>RIESHW ConstructionMaterialGasketPan head screwsStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all external hardwareMolded in flange for ease of mounting.Panel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisJ1008HWNOTES:HWHWBack PanelsIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 322Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326HWModifications See Special ModRight Modification pg 315 - 322Consult factory for detailsORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322115<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“J” Series “HW” Configuration Technical DrawingsWStandard Flat CoverCrowned CoverFBHOLE DIA.4 PLC'S.CCAEHCrowned CoverAvailable in 1008sizes onlyAEHJ <strong>SE</strong>RIESNAAMM<strong>SE</strong>CTION B-BBLBack Panel Available(see page 329)JBDK<strong>SE</strong>CTION A-A“J” Series <strong>Enclosures</strong> - “HW” Configuration DimensionsFRONT VIEWWITHOUT COVERSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJ 604HW 7.50 x 5.43 x 4.75 5.84 x 3.85 x 4.45 6.75 x 2 4 4.25 2.25 0.25 7.39 0.31 2.5 lbs. BP-64(191 x 138 x 121) (148 x 98 x 113) (171 x 51) (101) (108) (57) (6) (188) (8)J 606HW 7.50 x 7.50 x 4.75 5.72 x 5.72 x 4.45 6.75 x 4 4 4.25 4.25 0.25 7.52 0.31 2.75 lbs. BP-66(191 x 191 x 121) (145 x 145 x 113) (171 x 101) (101) (108) (108) (6) (191) (8)J 806HW 9.62 x 7.50 x 4.74 7.73 x 5.74 x 4.45 8.88 x 4 4 6.25 4.25 0.25 9.5 0.31 3.5 lbs. BP-86(244 x 191 x 121) (196 x 146 x 113) (225 x 101) (101) (159) (108) (6) (242) (8)J808HW 9.56 x 9.38 x 4.89 7.73 x 7.73 x 4.64 8.75 x 6.00 4.06 6.25 6.25 0.25 9.37 0.31 1.71 lbs. BP-88(243 x 238 x 124) (196 x 196 x 118) (222 x 152) (103) (159) (159) (6) (238) (8)J 1008HW 11.62 x 9.41 x 4.25 9.73 x 7.73 x 3.98 10.75 x 6 3.5 8.25 6.25 0.25 11.35 0.31 5 lbs. BP-108(295 x 239 x 108) (247 x 196 x 101) (273 x 152) (89) (209) (159) (6) (288) (8)J 1008HWA* 11.62 x 9.37 x 5.06 9.73 x 7.73 x 4.83 10.75 x 6 4.37 8.25 6.25 0.25 11.37 0.31 5 lbs. BP-108Crowned Cover (295 x 238 x 129) (247 x 196 x 123) (273 x 152) (111) (209) (159) (6) (289) (8)J 1210HW 13.56 x 11.43 x 5.21 11.79 x 9.80 x 4.94 12.75 x 8 4.5 10.25 8.25 0.25 13.41 0.31 6.5 lbs. BP-1210(344 x 291 x 132) (299 x 249 x 125) (324 x 203) (114) (260) (209) (6) (341) (8)J1212HW 13.56 x 13.38 x 6.36 11.70 x 11.70 x 6.11 12.75 x 10.00 5.53 10.25 10.25 0.25 13.38 0.31 3.20 lbs. BP-1212(344 x 340 x 161) (297 x 297 x 155) (324 x 254) (140) (260) (260) (6) (340) (8)J 1407HW 15.87 x 8.75 x 6.81 14.00 x 7.00 x 6.56 15 x 5 6.12 12.25 5.25 0.25 15.75 0.31 6.25 lbs. BP-1407(403 x 222 x 173) (356 x 178 x 167) (381 x 127) (156) (311) (133) (6) (400) (8)J 1412HW 15.50 x 13.50 x 6.25 13.53 x 11.55 x 5.94 14.62 x 10 5.37 12.25 10.25 0.25 15.47 0.31 8.5 lbs. BP-1412(394 x 343 x 159) (344 x 293 x 151) (371 x 254) (137) (311) (260) (6) (393) (8)J 1614HW 17.53 x 15.46 x 6.23 15.63 x 13.60 x 5.94 16.75 x 12 5.36 14.25 12.25 0.25 17.45 0.31 11.5 lbs. BP-1614(445 x 393 x 158) (397 x 345 x 151) (425 x 305) (136) (362) (311) (6) (443) (8)J 1816HW 19.62 x 17.61 x 8.82 17.69 x 15.69 x 8.45 18.88 x 12 7.99 16.25 14.25 0.25 19.61 0.31 19.25 lbs. BP-1816(498 x 447 x 224) (449 x 399 x 215) (479 x 305) (203) (413) (362) (6) (498) (8)J 2016HW 22.00 x 17.68 x 8.83 19.72 x 15.72 x 8.45 21.25 x 10.00 8 18.25 14.25 0.25 21.68 0.31 20.25 BPJ2016(559 x 449 x 224) (501 x 399 x 215) (540 x 254) (203) (464) (362) (6) (551) (8)All measures are in inches, items in parentheses are in millimeters.*Crowned cover – center of cover raised 3/4"<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com116
Technical Specifications - “J” SeriesHLL“HLL” configuration - Hinged, twistlock latchJJ <strong>SE</strong>RIESHLLConstructionMaterialGasketPan head screwsStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all external hardwareMolded in flange for ease of mounting.Panel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisNOTES:J1210HLLHLLHLLBack PanelsIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 322Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326HLLModifications See Special ModRight Modification pg 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322117<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“J” Series “HLL” Configuration Technical DrawingsWStandard Flat CoverCrowned CoverFBHOLE DIA.4 PLC'S.CCAEHCrowned CoverAvailable in 1008sizes onlyAEHJ <strong>SE</strong>RIESNAAMM<strong>SE</strong>CTION B-BBLBack Panel Available(see page 329)JBDK<strong>SE</strong>CTION A-A“J” Series <strong>Enclosures</strong> - “HLL” Configuration DimensionsFRONT VIEWWITHOUT COVERSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJ 604HLL 7.50 x 5.43 x 4.75 5.84 x 3.85 x 4.45 6.75 x 2 4 4.25 2.25 0.25 7.39 0.31 2.5 lbs. BP-64(191 x 138 x 121) (148 x 98 x 113) (171 x 51) (101) (108) (57) (6) (188) (8)J 606HLL 7.50 x 7.50 x 4.75 5.72 x 5.72 x 4.45 6.75 x 4 4 4.25 4.25 0.25 7.52 0.31 2.75 lbs. BP-66(191 x 191 x 121) (145 x 145 x 113) (171 x 101) (101) (108) (108) (6) (191) (8)J 806HLL 9.62 x 7.50 x 4.74 7.73 x 5.74 x 4.45 8.88 x 4 4 6.25 4.25 0.25 9.5 0.31 3.5 lbs. BP-86(244 x 191 x 121) (196 x 146 x 113) (225 x 101) (101) (159) (108) (6) (242) (8)J808HLL 9.56 x 9.38 x 4.89 7.73 x 7.73 x 4.64 8.75 x 6.00 4.06 6.25 6.25 0.25 9.37 0.31 1.71 lbs. BP-88(243 x 238 x 124) (196 x 196 x 118) (222 x 152) (103) (159) (159) (6) (238) (8)J 1008HLL 11.62 x 9.41 x 4.25 9.73 x 7.73 x 3.98 10.75 x 6 3.5 8.25 6.25 0.25 11.35 0.31 5 lbs. BP-108(295 x 239 x 108) (247 x 196 x 101) (273 x 152) (89) (209) (159) (6) (288) (8)J 1008HALL* 11.62 x 9.37 x 5.06 9.73 x 7.73 x 4.83 10.75 x 6 4.37 8.25 6.25 0.25 11.37 0.31 5 lbs. BP-108Crowned Cover (295 x 238 x 129) (247 x 196 x 123) (273 x 152) (111) (209) (159) (6) (289) (8)J 1210HLL 13.56 x 11.43 x 5.21 11.79 x 9.80 x 4.94 12.75 x 8 4.5 10.25 8.25 0.25 13.41 0.31 6.5 lbs. BP-1210(344 x 291 x 132) (299 x 249 x 125) (324 x 203) (114) (260) (209) (6) (341) (8)J1212HLL 13.56 x 13.38 x 6.36 11.70 x 11.70 x 6.11 12.75 x 10.00 5.53 10.25 10.25 0.25 13.38 0.31 3.20 lbs. BP-1212(344 x 340 x 161) (297 x 297 x 155) (324 x 254) (140) (260) (260) (6) (340) (8)J 1407HLL 15.87 x 8.75 x 6.81 14.00 x 7.00 x 6.56 15 x 5 6.12 12.25 5.25 0.25 15.75 0.31 6.25 lbs. BP-1407(403 x 222 x 173) (356 x 178 x 167) (381 x 127) (156) (311) (133) (6) (400) (8)J 1412HLL 15.50 x 13.50 x 6.25 13.53 x 11.55 x 5.94 14.62 x 10 5.37 12.25 10.25 0.25 15.47 0.31 8.5 lbs. BP-1412(394 x 343 x 159) (344 x 293 x 151) (371 x 254) (137) (311) (260) (6) (393) (8)J 1614HLL 17.53 x 15.46 x 6.23 15.63 x 13.60 x 5.94 16.75 x 12 5.36 14.25 12.25 0.25 17.45 0.31 11.5 lbs. BP-1614(445 x 393 x 158) (397 x 345 x 151) (425 x 305) (136) (362) (311) (6) (443) (8)J 1816HLL 19.62 x 17.61 x 8.82 17.69 x 15.69 x 8.45 18.88 x 12 7.99 16.25 14.25 0.25 19.61 0.31 19.25 lbs. BP-1816(498 x 447 x 224) (449 x 399 x 215) (479 x 305) (203) (413) (362) (6) (498) (8)J 2016HLL 22.00 x 17.68 x 8.83 19.72 x 15.72 x 8.45 21.25 x 10.00 8 18.25 14.25 0.25 21.68 0.31 20.25 BPJ2016(559 x 449 x 224) (501 x 399 x 215) (540 x 254) (203) (464) (362) (6) (551) (8)All measures are in inches, items in parentheses are in millimeters.*Crowned cover – center of cover raised 3/4"<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com118
Technical Specifications - “J” SeriesHPL“HPL” configuration - Hinged, padlock latchJJ <strong>SE</strong>RIESHPLConstructionMaterialGasketPan head screwsStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all external hardwareMolded in flange for ease of mounting.Panel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisJ1210HPLNOTES:HPLHPLBack PanelsIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 322Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326HPLModifications See Special ModRight Modification pg 315 - 322Consult factory for detailsORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322119<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“J” Series “HPL” Configuration Technical DrawingsWStandard Flat CoverCrowned CoverFBHOLE DIA.4 PLC'S.CCAEHCrowned CoverAvailable in 1008sizes onlyAEHJ <strong>SE</strong>RIESNAAMM<strong>SE</strong>CTION B-BBLBack Panel Available(see page 329)JBDK<strong>SE</strong>CTION A-A“J” Series <strong>Enclosures</strong> - “HPL” Configuration DimensionsFRONT VIEWWITHOUT COVERSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJ 604HPL 7.50 x 5.43 x 4.75 5.84 x 3.85 x 4.45 6.75 x 2 4 4.25 2.25 0.25 7.39 0.31 2.5 lbs. BP-64(191 x 138 x 121) (148 x 98 x 113) (171 x 51) (101) (108) (57) (6) (188) (8)J 606HPL 7.50 x 7.50 x 4.75 5.72 x 5.72 x 4.45 6.75 x 4 4 4.25 4.25 0.25 7.52 0.31 2.75 lbs. BP-66(191 x 191 x 121) (145 x 145 x 113) (171 x 101) (101) (108) (108) (6) (191) (8)J 806HPL 9.62 x 7.50 x 4.74 7.73 x 5.74 x 4.45 8.88 x 4 4 6.25 4.25 0.25 9.5 0.31 3.5 lbs. BP-86(244 x 191 x 121) (196 x 146 x 113) (225 x 101) (101) (159) (108) (6) (242) (8)J808HPL 9.56 x 9.38 x 4.89 7.73 x 7.73 x 4.64 8.75 x 6.00 4.06 6.25 6.25 0.25 9.37 0.31 1.71 lbs. BP-88(243 x 238 x 124) (196 x 196 x 118) (222 x 152) (103) (159) (159) (6) (238) (8)J 1008HPL 11.62 x 9.41 x 4.25 9.73 x 7.73 x 3.98 10.75 x 6 3.5 8.25 6.25 0.25 11.35 0.31 5 lbs. BP-108(295 x 239 x 108) (247 x 196 x 101) (273 x 152) (89) (209) (159) (6) (288) (8)J 1008HAPL* 11.62 x 9.37 x 5.06 9.73 x 7.73 x 4.83 10.75 x 6 4.37 8.25 6.25 0.25 11.37 0.31 5 lbs. BP-108Crowned Cover (295 x 238 x 129) (247 x 196 x 123) (273 x 152) (111) (209) (159) (6) (289) (8)J 1210HPL 13.56 x 11.43 x 5.21 11.79 x 9.80 x 4.94 12.75 x 8 4.5 10.25 8.25 0.25 13.41 0.31 6.5 lbs. BP-1210(344 x 291 x 132) (299 x 249 x 125) (324 x 203) (114) (260) (209) (6) (341) (8)J1212HPL 13.56 x 13.38 x 6.36 11.70 x 11.70 x 6.11 12.75 x 10.00 5.53 10.25 10.25 0.25 13.38 0.31 3.20 lbs. BP-1212(344 x 340 x 161) (297 x 297 x 155) (324 x 254) (140) (260) (260) (6) (340) (8)J 1407HPL 15.87 x 8.75 x 6.81 14.00 x 7.00 x 6.56 15 x 5 6.12 12.25 5.25 0.25 15.75 0.31 6.25 lbs. BP-1407(403 x 222 x 173) (356 x 178 x 167) (381 x 127) (156) (311) (133) (6) (400) (8)J 1412HPL 15.50 x 13.50 x 6.25 13.53 x 11.55 x 5.94 14.62 x 10 5.37 12.25 10.25 0.25 15.47 0.31 8.5 lbs. BP-1412(394 x 343 x 159) (344 x 293 x 151) (371 x 254) (137) (311) (260) (6) (393) (8)J 1614HPL 17.53 x 15.46 x 6.23 15.63 x 13.60 x 5.94 16.75 x 12 5.36 14.25 12.25 0.25 17.45 0.31 11.5 lbs. BP-1614(445 x 393 x 158) (397 x 345 x 151) (425 x 305) (136) (362) (311) (6) (443) (8)J 1816HPL 19.62 x 17.61 x 8.82 17.69 x 15.69 x 8.45 18.88 x 12 7.99 16.25 14.25 0.25 19.61 0.31 19.25 lbs. BP-1816(498 x 447 x 224) (449 x 399 x 215) (479 x 305) (203) (413) (362) (6) (498) (8)J 2016HPL 22.00 x 17.68 x 8.83 19.72 x 15.72 x 8.45 21.25 x 10.00 8 18.25 14.25 0.25 21.68 0.31 20.25 BPJ2016(559 x 449 x 224) (501 x 399 x 215) (540 x 254) (203) (464) (362) (6) (551) (8)All measures are in inches, items in parentheses are in millimeters.*Crowned cover – center of cover raised 3/4"<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com120
Technical Specifications - “J” Series“FHW” configuration - Fiberglass hinge, four cover screwsJJ <strong>SE</strong>RIESFHW ConstructionMaterialGasketPan head screwsStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealNo protruding surfaces<strong>300</strong> Series stainless used on all external hardwareMolded in flange for ease of mounting.Panel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisJ1008FHWNOTES:FHWIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 12NEMA 250 Type 1, 3, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixFHWBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 322Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326FHWModifications See Special ModRight Modification pg 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322121<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“J” Series “FHW” Configuration Technical DrawingsWStandard Flat CoverCrowned CoverFBHOLE DIA.4 PLC'S.CCAEHCrowned CoverAvailable in 1008sizes onlyAEHJ <strong>SE</strong>RIESNAAMM<strong>SE</strong>CTION B-BBLBack Panel Available(see page 329)JBDK<strong>SE</strong>CTION A-A“J” Series <strong>Enclosures</strong> - “FHW” Configuration DimensionsFRONT VIEWWITHOUT COVERSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJ 604FHW 7.50 x 5.43 x 4.75 5.84 x 3.85 x 4.45 6.75 x 2 4 4.25 2.25 0.25 7.39 0.31 2.5 lbs. BP-64(191 x 138 x 121) (148 x 98 x 113) (171 x 51) (101) (108) (57) (6) (188) (8)J 606FHW 7.50 x 7.50 x 4.75 5.72 x 5.72 x 4.45 6.75 x 4 4 4.25 4.25 0.25 7.52 0.31 2.75 lbs. BP-66(191 x 191 x 121) (145 x 145 x 113) (171 x 101) (101) (108) (108) (6) (191) (8)J 806FHW 9.62 x 7.50 x 4.74 7.73 x 5.74 x 4.45 8.88 x 4 4 6.25 4.25 0.25 9.5 0.31 3.5 lbs. BP-86(244 x 191 x 121) (196 x 146 x 113) (225 x 101) (101) (159) (108) (6) (242) (8)J808FHW 9.56 x 9.38 x 4.89 7.73 x 7.73 x 4.64 8.75 x 6.00 4.06 6.25 6.25 0.25 9.37 0.31 1.71 lbs. BP-88(243 x 238 x 124) (196 x 196 x 118) (222 x 152) (103) (159) (159) (6) (238) (8)J 1008FHW 11.62 x 9.41 x 4.25 9.73 x 7.73 x 3.98 10.75 x 6 3.5 8.25 6.25 0.25 11.35 0.31 5 lbs. BP-108(295 x 239 x 108) (247 x 196 x 101) (273 x 152) (89) (209) (159) (6) (288) (8)J 1008FHAW* 11.62 x 9.37 x 5.06 9.73 x 7.73 x 4.83 10.75 x 6 4.37 8.25 6.25 0.25 11.37 0.31 5 lbs. BP-108Crowned Cover (295 x 238 x 129) (247 x 196 x 123) (273 x 152) (111) (209) (159) (6) (289) (8)J 1210FHW 13.56 x 11.43 x 5.21 11.79 x 9.80 x 4.94 12.75 x 8 4.5 10.25 8.25 0.25 13.41 0.31 6.5 lbs. BP-1210(344 x 291 x 132) (299 x 249 x 125) (324 x 203) (114) (260) (209) (6) (341) (8)J1212FHW 13.56 x 13.38 x 6.36 11.70 x 11.70 x 6.11 12.75 x 10.00 5.53 10.25 10.25 0.25 13.38 0.31 3.20 lbs. BP-1212(344 x 340 x 161) (297 x 297 x 155) (324 x 254) (140) (260) (260) (6) (340) (8)J 1407FHW 15.87 x 8.75 x 6.81 14.00 x 7.00 x 6.56 15 x 5 6.12 12.25 5.25 0.25 15.75 0.31 6.25 lbs. BP-1407(403 x 222 x 173) (356 x 178 x 167) (381 x 127) (156) (311) (133) (6) (400) (8)J 1412FHW 15.50 x 13.50 x 6.25 13.53 x 11.55 x 5.94 14.62 x 10 5.37 12.25 10.25 0.25 15.47 0.31 8.5 lbs. BP-1412(394 x 343 x 159) (344 x 293 x 151) (371 x 254) (137) (311) (260) (6) (393) (8)J 1614FHW 17.53 x 15.46 x 6.23 15.63 x 13.60 x 5.94 16.75 x 12 5.36 14.25 12.25 0.25 17.45 0.31 11.5 lbs. BP-1614(445 x 393 x 158) (397 x 345 x 151) (425 x 305) (136) (362) (311) (6) (443) (8)J 1816FHW 19.62 x 17.61 x 8.82 17.69 x 15.69 x 8.45 18.88 x 12 7.99 16.25 14.25 0.25 19.61 0.31 19.25 lbs. BP-1816(498 x 447 x 224) (449 x 399 x 215) (479 x 305) (203) (413) (362) (6) (498) (8)J 2016FHW 22.00 x 17.68 x 8.83 19.72 x 15.72 x 8.45 21.25 x 10.00 8 18.25 14.25 0.25 21.68 0.31 20.25 BPJ2016(559 x 449 x 224) (501 x 399 x 215) (540 x 254) (203) (464) (362) (6) (551) (8)All measures are in inches, items in parentheses are in millimeters.*Crowned cover – center of cover raised 3/4"<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com122
Technical Specifications - “J” Series“FHLL” configuration - Fiberglass hinge, twistlock latchJJ <strong>SE</strong>RIESFHLLConstructionMaterialGasketStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all external hardwareMolded in flange for ease of mounting.Panel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisNOTES:J1210FHLLFHLLFHLLBack PanelsIndustry StandardsUL/cUL 50Not ListedNEMA 250 1, 3, 12CSA Std C22.2Not ListedTemperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 322Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326FHLLModifications See Special ModRight Modification pg 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322123<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“J” Series “FHLL” Configuration Technical DrawingsWStandard Flat CoverCrowned CoverFBHOLE DIA.4 PLC'S.CCAEHCrowned CoverAvailable in 1008sizes onlyAEHJ <strong>SE</strong>RIESNAAMM<strong>SE</strong>CTION B-BBLBack Panel Available(see page 329)JBDK<strong>SE</strong>CTION A-A“J” Series <strong>Enclosures</strong> - “FHLL” Configuration DimensionsFRONT VIEWWITHOUT COVERSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJ 604FHLL 7.50 x 5.43 x 4.75 5.84 x 3.85 x 4.45 6.75 x 2 4 4.25 2.25 0.25 7.39 0.31 2.5 lbs. BP-64(191 x 138 x 121) (148 x 98 x 113) (171 x 51) (101) (108) (57) (6) (188) (8)J 606FHLL 7.50 x 7.50 x 4.75 5.72 x 5.72 x 4.45 6.75 x 4 4 4.25 4.25 0.25 7.52 0.31 2.75 lbs. BP-66(191 x 191 x 121) (145 x 145 x 113) (171 x 101) (101) (108) (108) (6) (191) (8)J 806FHLL 9.62 x 7.50 x 4.74 7.73 x 5.74 x 4.45 8.88 x 4 4 6.25 4.25 0.25 9.5 0.31 3.5 lbs. BP-86(244 x 191 x 121) (196 x 146 x 113) (225 x 101) (101) (159) (108) (6) (242) (8)J808FHLL 9.56 x 9.38 x 4.89 7.73 x 7.73 x 4.64 8.75 x 6.00 4.06 6.25 6.25 0.25 9.37 0.31 1.71 lbs. BP-88(243 x 238 x 124) (196 x 196 x 118) (222 x 152) (103) (159) (159) (6) (238) (8)J 1008FHLL 11.62 x 9.41 x 4.25 9.73 x 7.73 x 3.98 10.75 x 6 3.5 8.25 6.25 0.25 11.35 0.31 5 lbs. BP-108(295 x 239 x 108) (247 x 196 x 101) (273 x 152) (89) (209) (159) (6) (288) (8)J1008FHALL* 11.62 x 9.37 x 5.06 9.73 x 7.73 x 4.83 10.75 x 6 4.37 8.25 6.25 0.25 11.37 0.31 5 lbs. BP-108Crowned Cover (295 x 238 x 129) (247 x 196 x 123) (273 x 152) (111) (209) (159) (6) (289) (8)J 1210FHLL 13.56 x 11.43 x 5.21 11.79 x 9.80 x 4.94 12.75 x 8 4.5 10.25 8.25 0.25 13.41 0.31 6.5 lbs. BP-1210(344 x 291 x 132) (299 x 249 x 125) (324 x 203) (114) (260) (209) (6) (341) (8)J1212FHLL 13.56 x 13.38 x 6.36 11.70 x 11.70 x 6.11 12.75 x 10.00 5.53 10.25 10.25 0.25 13.38 0.31 3.20 lbs. BP-1212(344 x 340 x 161) (297 x 297 x 155) (324 x 254) (140) (260) (260) (6) (340) (8)J 1407FHLL 15.87 x 8.75 x 6.81 14.00 x 7.00 x 6.56 15 x 5 6.12 12.25 5.25 0.25 15.75 0.31 6.25 lbs. BP-1407(403 x 222 x 173) (356 x 178 x 167) (381 x 127) (156) (311) (133) (6) (400) (8)J 1412FHLL 15.50 x 13.50 x 6.25 13.53 x 11.55 x 5.94 14.62 x 10 5.37 12.25 10.25 0.25 15.47 0.31 8.5 lbs. BP-1412(394 x 343 x 159) (344 x 293 x 151) (371 x 254) (137) (311) (260) (6) (393) (8)J 1614FHLL 17.53 x 15.46 x 6.23 15.63 x 13.60 x 5.94 16.75 x 12 5.36 14.25 12.25 0.25 17.45 0.31 11.5 lbs. BP-1614(445 x 393 x 158) (397 x 345 x 151) (425 x 305) (136) (362) (311) (6) (443) (8)J 1816FHLL 19.62 x 17.61 x 8.82 17.69 x 15.69 x 8.45 18.88 x 12 7.99 16.25 14.25 0.25 19.61 0.31 19.25 lbs. BP-1816(498 x 447 x 224) (449 x 399 x 215) (479 x 305) (203) (413) (362) (6) (498) (8)J 2016FHLL 22.00 x 17.68 x 8.83 19.72 x 15.72 x 8.45 21.25 x 10.00 8 18.25 14.25 0.25 21.68 0.31 20.25 BPJ2016(559 x 449 x 224) (501 x 399 x 215) (540 x 254) (203) (464) (362) (6) (551) (8)All measures are in inches, items in parentheses are in millimeters.*Crowned cover – center of cover raised 3/4"<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com124
Technical Specifications - “J” SeriesFHPL“FHPL” configuration - Fiberglass hinge, padlock latchJJ <strong>SE</strong>RIESFHPLConstructionMaterialGasketStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all external hardwareMolded in flange for ease of mounting.Panel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisJ1210FHPLNOTES:FHPLFHPLBack PanelsIndustry StandardsUL/cUL 50Not ListedNEMA 250 1, 3, 12CSA Std C22.2Not ListedTemperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 322Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326FHPLModifications See Special ModRight Modification pg 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322125<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“J” Series “FHPL” Configuration Technical DrawingsWStandard Flat CoverCrowned CoverFBHOLE DIA.4 PLC'S.CCAEHCrowned CoverAvailable in 1008sizes onlyAEHJ <strong>SE</strong>RIESNAAMM<strong>SE</strong>CTION B-BBLBack Panel Available(see page 329)JBDK<strong>SE</strong>CTION A-A“J” Series <strong>Enclosures</strong> - “FHPL” Configuration DimensionsFRONT VIEWWITHOUT COVERSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJ 604FHPL 7.50 x 5.43 x 4.75 5.84 x 3.85 x 4.45 6.75 x 2 4 4.25 2.25 0.25 7.39 0.31 2.5 lbs. BP-64(191 x 138 x 121) (148 x 98 x 113) (171 x 51) (101) (108) (57) (6) (188) (8)J 606FHPL 7.50 x 7.50 x 4.75 5.72 x 5.72 x 4.45 6.75 x 4 4 4.25 4.25 0.25 7.52 0.31 2.75 lbs. BP-66(191 x 191 x 121) (145 x 145 x 113) (171 x 101) (101) (108) (108) (6) (191) (8)J 806FHPL 9.62 x 7.50 x 4.74 7.73 x 5.74 x 4.45 8.88 x 4 4 6.25 4.25 0.25 9.5 0.31 3.5 lbs. BP-86(244 x 191 x 121) (196 x 146 x 113) (225 x 101) (101) (159) (108) (6) (242) (8)J808FHPL 9.56 x 9.38 x 4.89 7.73 x 7.73 x 4.64 8.75 x 6.00 4.06 6.25 6.25 0.25 9.37 0.31 1.71 lbs. BP-88(243 x 238 x 124) (196 x 196 x 118) (222 x 152) (103) (159) (159) (6) (238) (8)J 1008FHPL 11.62 x 9.41 x 4.25 9.73 x 7.73 x 3.98 10.75 x 6 3.5 8.25 6.25 0.25 11.35 0.31 5 lbs. BP-108(295 x 239 x 108) (247 x 196 x 101) (273 x 152) (89) (209) (159) (6) (288) (8)J1008FHAPL* 11.62 x 9.37 x 5.06 9.73 x 7.73 x 4.83 10.75 x 6 4.37 8.25 6.25 0.25 11.37 0.31 5 lbs. BP-108Crowned Cover (295 x 238 x 129) (247 x 196 x 123) (273 x 152) (111) (209) (159) (6) (289) (8)J 1210FHPL 13.56 x 11.43 x 5.21 11.79 x 9.80 x 4.94 12.75 x 8 4.5 10.25 8.25 0.25 13.41 0.31 6.5 lbs. BP-1210(344 x 291 x 132) (299 x 249 x 125) (324 x 203) (114) (260) (209) (6) (341) (8)J1212FHPL 13.56 x 13.38 x 6.36 11.70 x 11.70 x 6.11 12.75 x 10.00 5.53 10.25 10.25 0.25 13.38 0.31 3.20 lbs. BP-1212(344 x 340 x 161) (297 x 297 x 155) (324 x 254) (140) (260) (260) (6) (340) (8)J 1407FHPL 15.87 x 8.75 x 6.81 14.00 x 7.00 x 6.56 15 x 5 6.12 12.25 5.25 0.25 15.75 0.31 6.25 lbs. BP-1407(403 x 222 x 173) (356 x 178 x 167) (381 x 127) (156) (311) (133) (6) (400) (8)J 1412FHPL 15.50 x 13.50 x 6.25 13.53 x 11.55 x 5.94 14.62 x 10 5.37 12.25 10.25 0.25 15.47 0.31 8.5 lbs. BP-1412(394 x 343 x 159) (344 x 293 x 151) (371 x 254) (137) (311) (260) (6) (393) (8)J 1614FHPL 17.53 x 15.46 x 6.23 15.63 x 13.60 x 5.94 16.75 x 12 5.36 14.25 12.25 0.25 17.45 0.31 11.5 lbs. BP-1614(445 x 393 x 158) (397 x 345 x 151) (425 x 305) (136) (362) (311) (6) (443) (8)J 1816FHPL 19.62 x 17.61 x 8.82 17.69 x 15.69 x 8.45 18.88 x 12 7.99 16.25 14.25 0.25 19.61 0.31 19.25 lbs. BP-1816(498 x 447 x 224) (449 x 399 x 215) (479 x 305) (203) (413) (362) (6) (498) (8)J 2016FHPL 22.00 x 17.68 x 8.83 19.72 x 15.72 x 8.45 21.25 x 10.00 8 18.25 14.25 0.25 21.68 0.31 20.25 BPJ2016(559 x 449 x 224) (501 x 399 x 215) (540 x 254) (203) (464) (362) (6) (551) (8)All measures are in inches, items in parentheses are in millimeters.*Crowned cover – center of cover raised 3/4"<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com126
The “JW” Series JWJW <strong>SE</strong>RIESThe “JW” SeriesThe “JW” Series enclosures adds a max sized flush mounted window to the standard cover fiberglass enclosure. The resultis a low profile enclosure with great internal component visibility. Side-walls are unobstructed, and the enclosure accepts bothstandard back panels and a dead front panel system, offering a full range of possibilities when working with this enclosure.“JW” series enclosures are designed for general electrical and electronic applications and any application that hasassociated environmental concerns. The full size window is useful for panel readouts, touch displays and items that need to beseen and interacted. Quick release mechanisms allow quick entry into theenclosure, or choose a standard screw cover with retention chain forpermanent mounting.“JW” series windows are uniquely routed for a precisionflush fit. The enclosure maintains its watertight (4x) ratingIntegral Mounting Flangeas well as its submersible rating (6P) due to this uniqueSeamless Polyurethaneconstruction. Offering ample space, easy access, highDoor Gasketvisibility and environmental protection all in onesleek package.Featured HighlightsSeries “JW” “JW” Series AttributesFull LengthStainless Steel Hinge●●●●●●●●Overhang cover on smooth sided baseFull size flush mounted window of scratchresistant UVA acrylicAll stainless hardware latches and screwsFull length stainless steel hingeChemically resistant fiberglass reinforcedpolyesterSubmersible, non corrosive, environmental designsMaintains both watertight and submersible ratingswith installed windowsExclusive stainless steel retention chain on screw covers“JW” Series SpecificationsSolid ConstructionCompression MoldedFiberglass ReinforcedPolyesterFlush Mounted WindowIndustrial ToughEconomicalLatch Mechanism• Padlock Latch• Link Lock Latch●Water tight●Fire resistant●UL/cUL approved●Submersible●Light weight●CSA approved●Corrosion Resistant● Rated NEMA 1, 3, 4X, 6P, 12LISTEDLISTEDThe “JW” Series is Applicable for Many Industries including:OEM &instrumentation designs Moveable Platforms Rendering Plants SCADA Systems
JW <strong>SE</strong>RIESThe “JW” Series● Twelve basic sizes● Four basic concepts● Seven configurations(W, HW, HLL, HPL, FHW, FHLL, FHPL)
The “JW” SeriesJWJW <strong>SE</strong>RIESThe “JW” Series Family consists offour basic concepts: screw downcover, hinged cover with screwdown, a twist lock latch and apadlock latch. There aretwelve basic sizes in therange. Simple screw downcover style enclosuresemploy an industryexclusive stainless steelretention chain. A full sizebonded window providesmaximum visibility ofinternal components whilemaintaining the fullenvironmental integrity of the enclosure. Enclosure maintains itswatertight and submersible ratings even with installed window.“JW” Series Ordering InformationUse the information below to derive specific catalog numbers. <strong>Stahlin</strong>catalog numbers first begin with Family ID, then size ID andconfiguration ID as a suffix. See the example below.Ordering Information - Deriving <strong>Catalog</strong> NumbersFamily ID Size ID Configuration ID EXAMPLEJW XXXX Conf. ID = “JW604W”“JW” Series - Inside DimensionsSize ID H x W x D Optional Panel #JW604 5.84 x 3.85 x 4.45 BP64JW606 5.72 x 5.72 x 4.45 BP66JW806 7.73 x 5.74 x 4.45 BP86JW808 7.73 x 7.73 x 4.82 BP88JW1008 9.73 x 7.73 x 3.98 BP108JW1210 11.79 x 9.80 x 4.94 BP1210JW1212 11.70 x 11.70 x 6.29 BP1212JW1407 14.00 x 7.00 x 6.56 BP1407JW1412 13.53 x 11.55 x 5.94 BP1412JW1614 15.63 x 13.60 x 5.94 BP1614JW1816 17.69 x 15.69 x 8.45 BP1816JW2016 19.72 x 15.72 x 8.45 BPJ2016Optional back panels available in various materials. See page 329“JW” Series - ConfigurationsConfigurationIDDESCRIPTIONW4 cover screws, flush bonded window, lift off cover configurationHWHinged, flush bonded window, 2 cover screws configurationHLLHinged, flush bonded window, link lock latch configurationHPLHinged, flush bonded window, padlock latch configurationFHWFiberglass hinged, flush mounted window, 4 cover screws config.FHLLFiberglass hinged, flush mounted window, link lock latch config.FHPL Fiberglass hinged, flush mounted window, padlock latch config.“JW” Series Shared CharacteristicsConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsBonded WindowPhysical Characteristics<strong>Non</strong> corrosiveWater-tightDust-tightImpact resistant<strong>Non</strong> ConductiveLight weightUV resistantWorkable materialEasy maintenancePleasing aestheticsColor/FinishIndustry StandardsHot compression molded fiberglassreinforced polyesterPoured polyurethane seamlessgasket provides watertight, dust-tightenvironmental sealNo protruding surfaces<strong>300</strong> Series stainless used on allexternal hardwareIntegral flange molded in place forease of mounting.Panel mounting capability forfixed rear panelAll bosses utilize threaded brass insertsaccepting 10-32 screwsFlush mounted window uses a scratch& abrasion resistant acrylicStands up to an exceptionally broadrange of chemical exposuresRated watertight and submersible for aprolonged periodResults in an environmentally sealed,environmentally sound spaceResilient material with high impactresistanceDouble insulated material. No incidentalelectrical contactSolid construction in a lightweightdesignMinimizes the affects of sunlightCuts, drills, punches, and saws withease and accuracyScratches and gouges can be restoredwith a petroleum jelly productSmooth lines, soft colors easily blendinto customer’s design conceptsSmooth surface, no color variations,swirls, or color pockets, no voids.Color described as Glacier GrayUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow flammability UL94V-0Self extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed inappendix129<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“JW” Series ConfigurationsW4 cover screws, flush mounted window, lift off coverDesign Features● Lift off cover design● Scratch and abrasion resistant UVA acrylic flushbonded window● Pan head stainless steel screws● Integral mounting flange● Maintains both watertight and submersible ratingswith installed window● Stainless steel beaded cover retention chainJW <strong>SE</strong>RIESJW1008WHWHinged, flush mounted window, 2 cover screwsDesign Features● Full length stainless steel hinged cover● Scratch and abrasion resistant UVA acrylic flushbonded window● Pan head stainless steel screws● Maintains both watertight and submersible ratings withinstalled window● Full 180°+ door openingJW1008HWHLLHinged, flush mounted window, link lock latchDesign Features● Scratch and abrasion resistant UVA acrylicflush bonded window● Link lock latch for quick entry● Latch lies flat on side of enclosure● Can be lifted and turned with ease● Full 180°+ door openingJW1008HLL<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com130
“JW” Series ConfigurationsHPLHinged, flush mounted window, padlock latchJW <strong>SE</strong>RIESDesign Features● Scratch and abrasion resistant UVA acrylic flush mounted window● Padlock latch for quick entry plus security● Snap catch concept with toggle action● Integral hasp provides secure loop for padlock (not included)● Can be lifted and released with ease● Full 180°+ door openingJW1008HPLFHWFiberglass hinged, flush bonded window, four cover screwsDesign Features● Fiberglass hinge provides maximum corrosion resistance● Scratch and abrasion resistant UVA acrylic flush bonded window● Pan head stainless steel screws maintain low profile on cover● Four cover screws configuration secures cover● Full 180°+ door openingJW1210FHWFHLLFiberglass hinged, flush mounted window, link lock latchDesign Features●●●●●Fiberglass hinge for maximum corrosion resistanceRemovable lift off cover capabilityScratch and abrasion resistant UVA acrylic flushbonded windowLink lock latch mechanism for easy entryFull 180°+ door openingJW1008FHLL131<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“JW” Series ConfigurationsFHPLFiberglass hinged, flush bonded window, padlock latchDesign Features●●●●●Fiberglass hinge for maximum corrosion resistanceRemovable lift off cover capabilityScratch and abrasion resistant UVA acrylic flushbonded windowPadlock latch for quick entry and added securityFull 180°+ door openingJW <strong>SE</strong>RIESJW1008FHPLJW Series - Flush Mounted WindowsFlat Cover Junction EnclosureFlat Cover DimensionsPartNumber CCWindow Area(Maximum)JW 604 3.88 4.25 x 2.25(99) (108 x 57)JW 606 3.88 4.25 x 4.25(99) (108 x 108)JW 806 3.88 6.25 x 4.25(99) (159 x 108)JW 808 4.53 6.25 x 6.25(115) (159 x159)JW 1008 3.42 8.25 x 6.25(87) (210 x 159)JW 1210 4.38 10.25 x 8.25(111) (260 x 210)JW 1212 6.36 10.25 x 10.25(161) (260 x 260)JW 1407 5.98 12.75 x 5.75(152) (324 x 146)JW 1412 5.25 12.25 x 10.25(133) (311 x 260)JW 1614 5.27 14.25 x 12.25(134) (362 x 311)JW 1816* 7.93 16.25 x 14.25(201) (413 x 362)JW 2016* 7.95 18.25 x 14.25(202) (463 x 362)AAFLUSHMOUNTWINDOWCC<strong>SE</strong>CTION A-AJW Series - Crowned CoverCrowned Cover Junction EnclosureCrowned Cover Dimensions<strong>Catalog</strong>WINDOWNumber CA CB CC AREAJWA 1008A 9.39 7.38 4.25 8.25 X 6.25(239) (188) (108) (210 x 159)Caution: Metric units are for reference;do not convert.All measures are in inches, items in parentheses are in millimeters.*STD part is not 6P rated, to maintain 6p rating window up to 141/4 x 121/4.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com132
WTechnical Specifications - “JW” Series“W” configuration - 4 cover screws, flush bonded window, lift off coverJWJW <strong>SE</strong>RIESWConstructionMaterialGasketPan head screwsStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsBonded windowCover retention chainHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental sealMinimizes protruding surfaces<strong>300</strong> Series stainless used on all external hardwareMolded in flange for ease of mounting.Panel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsPrecision routed flush bonded window for maximum visibilityStainless steel beaded chain for securing cover after lift offJW1008HWNOTES:WWIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326WModifications See Special ModRight Modification pg. 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322133<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“JW” Series “W” Configuration Technical DrawingsWStandard Flat CoverCrowned CoverFBHOLE DIA.4 PLC'S.CCAEHCrowned CoverAvailable in 1008sizes onlyAEHJW <strong>SE</strong>RIESNAAOMM<strong>SE</strong>CTION B-BBLBack Panel Available(See Accessories)JBDK<strong>SE</strong>CTION A-A“JW” Series <strong>Enclosures</strong> - “W” Configuration DimensionsFRONT VIEWWITHOUT COVERSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CWINDOW AREA[MAXIMUM]MOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJW604W 7.50 x 5.43 x 4.75 5.84 x 3.85 x 4.45 4.25 x 2.25 6.75 x 2 4 4.25 2.25 0.25 7.39 0.31 2.5 lbs. BP-64(191 x 138 x 121) (148 x 98 x 113) (108 x 57) (171 x 51) (101) (108) (57) (6) (188) (8)JW606W 7.50 x 7.50 x 4.75 5.72 x 5.72 x 4.45 4.25 x 4.25 6.75 x 4 4 4.25 4.25 0.25 7.52 0.31 2.75 lbs. BP-66(191 x 191 x 121) (145 x 145 x 113) (108 x 108) (171 x 101) (101) (108) (108) (6) (191) (8)JW806W 9.62 x 7.50 x 4.74 7.73 x 5.74 x 4.45 6.25 x 4.25 8.88 x 4 4 6.25 4.25 0.25 9.5 0.31 3.5 lbs. BP-86(244 x 191 x 121) (196 x 146 x 113) (159 x 108) (225 x 101) (101) (159) (108) (6) (242) (8)JW808W 9.56 x 9.38 x 4.89 7.73 x 7.73 x 4.53 8.75 x 6.00 6.25 x 6.25 3.93 6.25 6.25 0.25 9.37 0.31 1.71 lbs. BP-88(243 x 238 x 124) (196 x 196 x 115) (222 x 152) (159 x 159) (100) (159) (159) (6) (238) (8)JW1008W 11.62 x 9.41 x 4.25 9.73 x 7.73 x 3.98 8.25 x 6.25 10.75 x 6 3.5 8.25 6.25 0.25 11.35 0.31 5 lbs. BP-108(295 x 239 x 108) (247 x 196 x 101) (210 x 159) (273 x 152) (89) (209) (159) (6) (288) (8)JW1008WA* 11.62 x 9.37 x 5.06 9.73 x 7.73 x 4.83 8.25 x 6.25 10.75 x 6 4.37 8.25 6.25 0.25 11.37 0.31 5 lbs. BP-108Crowned Cover (295 x 238 x 129) (247 x 196 x 123) (210 x 159) (273 x 152) (111) (209) (159) (6) (289) (8)JW1210W 13.56 x 11.43 x 5.21 11.79 x 9.80 x 4.94 10.25 x 8.25 12.75 x 8 4.5 10.25 8.25 0.25 13.41 0.31 6.5 lbs. BP-1210(344 x 291 x 132) (299 x 249 x 125) (260 x 210) (324 x 203) (114) (260) (209) (6) (341) (8)JW1212W 13.56 x 13.38 x 6.36 11.70 x 11.70 x 5.98 12.75 x 10.00 10.25 x 10.25 5.40 10.25 10.25 0.25 13.38 0.31 3.20 lbs. BP-1212(344 x 340 x 161) (297 x 297 x 152) (324 x 254) (260 x 260) (137) (260) (260) (6) (340) (8)JW1407W 15.87 x 8.75 x 6.81 14.00 x 7.00 x 6.56 12.75 x 5.75 15 x 5 6.12 12.25 5.25 0.25 15.75 0.31 6.25 lbs. BP-1407(403 x 222 x 173) (356 x 178 x 167) (324 x 146) (381 x 127) (156) (311) (133) (6) (400) (8)JW1412W 15.50 x 13.50 x 6.25 13.53 x 11.55 x 5.94 12.25 x 10.25 14.62 x 10 5.37 12.25 10.25 0.25 15.47 0.31 8.5 lbs. BP-1412(394 x 343 x 159) (344 x 293 x 151) (311 x 260) (371 x 254) (137) (311) (260) (6) (393) (8)JW1614W 17.53 x 15.46 x 6.23 15.63 x 13.60 x 5.94 14.25 x 12.25 16.75 x 12 5.36 14.25 12.25 0.25 17.45 0.31 11.5 lbs. BP-1614(445 x 393 x 158) (397 x 345 x 151) (362 x 311) (425 x 305) (136) (362) (311) (6) (443) (8)JW1816W** 19.62 x 17.61 x 8.82 17.69 x 15.69 x 8.45 16.25 x 14.25 18.88 x 12 7.99 16.25 14.25 0.25 19.61 0.31 19.25 lbs. BP-1816(498 x 447 x 224) (449 x 399 x 215) (413 x 362) (479 x 305) (203) (413) (362) (6) (498) (8)JW2016W** 22.00 x 17.68 x 8.83 19.72 x 15.72 x 8.45 18.25 x 14.25 21.25 x 10.00 8 18.25 14.25 0.25 21.68 0.31 20.25 BPJ2016(559 x 449 x 224) (501 x 399 x 215) (464 x 362) (540 x 254) (203) (464) (362) (6) (551) (8)All measures are in inches, items in parentheses are in millimeters.*Crowned cover – center of cover raised 3/4" **1816, 2016 sizes not 6, 6P Rated<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com134
HWTechnical Specifications - “JW” Series“HW” configuration - Hinged, flush bonded window, 2 cover screwsJWJW <strong>SE</strong>RIESHW ConstructionMaterialGasketPan head screwsStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsBonded windowRaised coverHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental sealMinimizes protruding surfaces<strong>300</strong> Series stainless used on all external hardwareMolded in flange for ease of mounting.Panel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsPrecision routed flush bonded window for maximum visibilityExtended depth in coverJW1008HWNOTES:HWIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixHWBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326HWModifications See Special ModRight Modification pg. 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322135<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“JW” Series “HW” Configuration Technical DrawingsWStandard Flat CoverCrowned CoverFBHOLE DIA.4 PLC'S.CCAEHCrowned CoverAvailable in 1008sizes onlyAEHJW <strong>SE</strong>RIESNAAOMM<strong>SE</strong>CTION B-BBLBack Panel Available(See Accessories)JBDK<strong>SE</strong>CTION A-A“JW” Series <strong>Enclosures</strong> - “HW” Configuration DimensionsFRONT VIEWWITHOUT COVERSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CWINDOW AREA[MAXIMUM]MOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJW604HW 7.50 x 5.43 x 4.75 5.84 x 3.85 x 4.45 4.25 x 2.25 6.75 x 2 4 4.25 2.25 0.25 7.39 0.31 2.5 lbs. BP-64(191 x 138 x 121) (148 x 98 x 113) (108 x 57) (171 x 51) (101) (108) (57) (6) (188) (8)JW606HW 7.50 x 7.50 x 4.75 5.72 x 5.72 x 4.45 4.25 x 4.25 6.75 x 4 4 4.25 4.25 0.25 7.52 0.31 2.75 lbs. BP-66(191 x 191 x 121) (145 x 145 x 113) (108 x 108) (171 x 101) (101) (108) (108) (6) (191) (8)JW806HW 9.62 x 7.50 x 4.74 7.73 x 5.74 x 4.45 6.25 x 4.25 8.88 x 4 4 6.25 4.25 0.25 9.5 0.31 3.5 lbs. BP-86(244 x 191 x 121) (196 x 146 x 113) (159 x 108) (225 x 101) (101) (159) (108) (6) (242) (8)JW808HW 9.56 x 9.38 x 4.89 7.73 x 7.73 x 4.53 8.75 x 6.00 6.25 x 6.25 3.93 6.25 6.25 0.25 9.37 0.31 1.71 lbs. BP-88(243 x 238 x 124) (196 x 196 x 115) (222 x 152) (159 x 159) (100) (159) (159) (6) (238) (8)JW1008HW 11.62 x 9.41 x 4.25 9.73 x 7.73 x 3.98 8.25 x 6.25 10.75 x 6 3.5 8.25 6.25 0.25 11.35 0.31 5 lbs. BP-108(295 x 239 x 108) (247 x 196 x 101) (210 x 159) (273 x 152) (89) (209) (159) (6) (288) (8)JW1008HWA* 11.62 x 9.37 x 5.06 9.73 x 7.73 x 4.83 8.25 x 6.25 10.75 x 6 4.37 8.25 6.25 0.25 11.37 0.31 5 lbs. BP-108Crowned Cover (295 x 238 x 129) (247 x 196 x 123) (210 x 159) (273 x 152) (111) (209) (159) (6) (289) (8)JW1210HW 13.56 x 11.43 x 5.21 11.79 x 9.80 x 4.94 10.25 x 8.25 12.75 x 8 4.5 10.25 8.25 0.25 13.41 0.31 6.5 lbs. BP-1210(344 x 291 x 132) (299 x 249 x 125) (260 x 210) (324 x 203) (114) (260) (209) (6) (341) (8)JW1212HW 13.56 x 13.38 x 6.36 11.70 x 11.70 x 5.98 12.75 x 10.00 10.25 x 10.25 5.40 10.25 10.25 0.25 13.38 0.31 3.20 lbs. BP-1212(344 x 340 x 161) (297 x 297 x 152) (324 x 254) (260 x 260) (137) (260) (260) (6) (340) (8)JW1407HW 15.87 x 8.75 x 6.81 14.00 x 7.00 x 6.56 12.75 x 5.75 15 x 5 6.12 12.25 5.25 0.25 15.75 0.31 6.25 lbs. BP-1407(403 x 222 x 173) (356 x 178 x 167) (324 x 146) (381 x 127) (156) (311) (133) (6) (400) (8)JW1412HW 15.50 x 13.50 x 6.25 13.53 x 11.55 x 5.94 12.25 x 10.25 14.62 x 10 5.37 12.25 10.25 0.25 15.47 0.31 8.5 lbs. BP-1412(394 x 343 x 159) (344 x 293 x 151) (311 x 260) (371 x 254) (137) (311) (260) (6) (393) (8)JW1614HW 17.53 x 15.46 x 6.23 15.63 x 13.60 x 5.94 14.25 x 12.25 16.75 x 12 5.36 14.25 12.25 0.25 17.45 0.31 11.5 lbs. BP-1614(445 x 393 x 158) (397 x 345 x 151) (362 x 311) (425 x 305) (136) (362) (311) (6) (443) (8)JW1816HW** 19.62 x 17.61 x 8.82 17.69 x 15.69 x 8.45 16.25 x 14.25 18.88 x 12 7.99 16.25 14.25 0.25 19.61 0.31 19.25 lbs. BP-1816(498 x 447 x 224) (449 x 399 x 215) (413 x 362) (479 x 305) (203) (413) (362) (6) (498) (8)JW2016HW** 22.00 x 17.68 x 8.83 19.72 x 15.72 x 8.45 18.25 x 14.25 21.25 x 10.00 8 18.25 14.25 0.25 21.68 0.31 20.25 BPJ2016(559 x 449 x 224) (501 x 399 x 215) (464 x 362) (540 x 254) (203) (464) (362) (6) (551) (8)All measures are in inches, items in parentheses are in millimeters.*Crowned cover – center of cover raised 3/4" **1816, 2016 sizes not 6, 6P Rated<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com136
Technical Specifications - “JW” SeriesHLL“HLL” configuration - Hinged, flush bonded window, link lock latchJWJW <strong>SE</strong>RIESHLL ConstructionMaterialGasketStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsBonded windowCover retention chainHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all external hardwareMolded in flange for ease of mounting.Panel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsPrecision routed flush bonded window for maximum visibilityStainless steel beaded chain for securing cover after lift offJW1008HLLNOTES:HLLIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixHLLBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326HLLModifications See Special ModRight Modification pg. 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322137<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“JW” Series “HLL” Configuration Technical DrawingsWStandard Flat CoverCrowned CoverFBHOLE DIA.4 PLC'S.CCAEHCrowned CoverAvailable in 1008sizes onlyAEHJW <strong>SE</strong>RIESNAAOMM<strong>SE</strong>CTION B-BBLBack Panel Available(See Accessories)JBDK<strong>SE</strong>CTION A-A“JW” Series <strong>Enclosures</strong> - “HLL” Configuration DimensionsFRONT VIEWWITHOUT COVERSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CWINDOW AREA[MAXIMUM]MOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJW604HLL 7.50 x 5.43 x 4.75 5.84 x 3.85 x 4.45 4.25 x 2.25 6.75 x 2 4 4.25 2.25 0.25 7.39 0.31 2.5 lbs. BP-64(191 x 138 x 121) (148 x 98 x 113) (108 x 57) (171 x 51) (101) (108) (57) (6) (188) (8)JW606HLL 7.50 x 7.50 x 4.75 5.72 x 5.72 x 4.45 4.25 x 4.25 6.75 x 4 4 4.25 4.25 0.25 7.52 0.31 2.75 lbs. BP-66(191 x 191 x 121) (145 x 145 x 113) (108 x 108) (171 x 101) (101) (108) (108) (6) (191) (8)JW806HLL 9.62 x 7.50 x 4.74 7.73 x 5.74 x 4.45 6.25 x 4.25 8.88 x 4 4 6.25 4.25 0.25 9.5 0.31 3.5 lbs. BP-86(244 x 191 x 121) (196 x 146 x 113) (159 x 108) (225 x 101) (101) (159) (108) (6) (242) (8)JW808HLL 9.56 x 9.38 x 4.89 7.73 x 7.73 x 4.53 8.75 x 6.00 6.25 x 6.25 3.93 6.25 6.25 0.25 9.37 0.31 1.71 lbs. BP-88(243 x 238 x 124) (196 x 196 x 115) (222 x 152) (159 x 159) (100) (159) (159) (6) (238) (8)JW1008HLL 11.62 x 9.41 x 4.25 9.73 x 7.73 x 3.98 8.25 x 6.25 10.75 x 6 3.5 8.25 6.25 0.25 11.35 0.31 5 lbs. BP-108(295 x 239 x 108) (247 x 196 x 101) (210 x 159) (273 x 152) (89) (209) (159) (6) (288) (8)JW1008HALL* 11.62 x 9.37 x 5.06 9.73 x 7.73 x 4.83 8.25 x 6.25 10.75 x 6 4.37 8.25 6.25 0.25 11.37 0.31 5 lbs. BP-108Crowned Cover (295 x 238 x 129) (247 x 196 x 123) (210 x 159) (273 x 152) (111) (209) (159) (6) (289) (8)JW1210HLL 13.56 x 11.43 x 5.21 11.79 x 9.80 x 4.94 10.25 x 8.25 12.75 x 8 4.5 10.25 8.25 0.25 13.41 0.31 6.5 lbs. BP-1210(344 x 291 x 132) (299 x 249 x 125) (260 x 210) (324 x 203) (114) (260) (209) (6) (341) (8)JW1212HLL 13.56 x 13.38 x 6.36 11.70 x 11.70 x 5.98 12.75 x 10.00 10.25 x 10.25 5.40 10.25 10.25 0.25 13.38 0.31 3.20 lbs. BP-1212(344 x 340 x 161) (297 x 297 x 152) (324 x 254) (260 x 260) (137) (260) (260) (6) (340) (8)JW1407HLL 15.87 x 8.75 x 6.81 14.00 x 7.00 x 6.56 12.75 x 5.75 15 x 5 6.12 12.25 5.25 0.25 15.75 0.31 6.25 lbs. BP-1407(403 x 222 x 173) (356 x 178 x 167) (324 x 146) (381 x 127) (156) (311) (133) (6) (400) (8)JW1412HLL 15.50 x 13.50 x 6.25 13.53 x 11.55 x 5.94 12.25 x 10.25 14.62 x 10 5.37 12.25 10.25 0.25 15.47 0.31 8.5 lbs. BP-1412(394 x 343 x 159) (344 x 293 x 151) (311 x 260) (371 x 254) (137) (311) (260) (6) (393) (8)JW1614HLL 17.53 x 15.46 x 6.23 15.63 x 13.60 x 5.94 14.25 x 12.25 16.75 x 12 5.36 14.25 12.25 0.25 17.45 0.31 11.5 lbs. BP-1614(445 x 393 x 158) (397 x 345 x 151) (362 x 311) (425 x 305) (136) (362) (311) (6) (443) (8)JW1816HLL** 19.62 x 17.61 x 8.82 17.69 x 15.69 x 8.45 16.25 x 14.25 18.88 x 12 7.99 16.25 14.25 0.25 19.61 0.31 19.25 lbs. BP-1816(498 x 447 x 224) (449 x 399 x 215) (413 x 362) (479 x 305) (203) (413) (362) (6) (498) (8)JW2016HLL** 22.00 x 17.68 x 8.83 19.72 x 15.72 x 8.45 18.25 x 14.25 21.25 x 10.00 8 18.25 14.25 0.25 21.68 0.31 20.25 BPJ2016(559 x 449 x 224) (501 x 399 x 215) (464 x 362) (540 x 254) (203) (464) (362) (6) (551) (8)All measures are in inches, items in parentheses are in millimeters.*Crowned cover – center of cover raised 3/4" **1816, 2016 sizes not 6, 6P Rated<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com138
Technical Specifications - “JW” SeriesHPL“HPL” configuration - Hinged, flush bonded window, padlock latchJWJW <strong>SE</strong>RIESHPL ConstructionMaterialGasketStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsBonded windowHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all external hardwareMolded in flange for ease of mounting.Panel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsPrecision routed flush bonded window for maximum visibilityJW1008HPLNOTES:HPLIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixHPLBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326HPLModifications See Special ModRight Modification pg. 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322139<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“JW” Series “HPL” Configuration Technical DrawingsWStandard Flat CoverCrowned CoverFBHOLE DIA.4 PLC'S.CCAEHCrowned CoverAvailable in 1008sizes onlyAEHJW <strong>SE</strong>RIESNAAOMM<strong>SE</strong>CTION B-BBLBack Panel Available(See Accessories)JBDK<strong>SE</strong>CTION A-A“JW” Series <strong>Enclosures</strong> - “HPL” Configuration DimensionsFRONT VIEWWITHOUT COVERSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CWINDOW AREA[MAXIMUM]MOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJW604HPL 7.50 x 5.43 x 4.75 5.84 x 3.85 x 4.45 4.25 x 2.25 6.75 x 2 4 4.25 2.25 0.25 7.39 0.31 2.5 lbs. BP-64(191 x 138 x 121) (148 x 98 x 113) (108 x 57) (171 x 51) (101) (108) (57) (6) (188) (8)JW606HPL 7.50 x 7.50 x 4.75 5.72 x 5.72 x 4.45 4.25 x 4.25 6.75 x 4 4 4.25 4.25 0.25 7.52 0.31 2.75 lbs. BP-66(191 x 191 x 121) (145 x 145 x 113) (108 x 108) (171 x 101) (101) (108) (108) (6) (191) (8)JW806HPL 9.62 x 7.50 x 4.74 7.73 x 5.74 x 4.45 6.25 x 4.25 8.88 x 4 4 6.25 4.25 0.25 9.5 0.31 3.5 lbs. BP-86(244 x 191 x 121) (196 x 146 x 113) (159 x 108) (225 x 101) (101) (159) (108) (6) (242) (8)JW808HPL 9.56 x 9.38 x 4.89 7.73 x 7.73 x 4.53 8.75 x 6.00 6.25 x 6.25 3.93 6.25 6.25 0.25 9.37 0.31 1.71 lbs. BP-88(243 x 238 x 124) (196 x 196 x 115) (222 x 152) (159 x 159) (100) (159) (159) (6) (238) (8)JW1008HPL 11.62 x 9.41 x 4.25 9.73 x 7.73 x 3.98 8.25 x 6.25 10.75 x 6 3.5 8.25 6.25 0.25 11.35 0.31 5 lbs. BP-108(295 x 239 x 108) (247 x 196 x 101) (210 x 159) (273 x 152) (89) (209) (159) (6) (288) (8)JW1008HAPL* 11.62 x 9.37 x 5.06 9.73 x 7.73 x 4.83 8.25 x 6.25 10.75 x 6 4.37 8.25 6.25 0.25 11.37 0.31 5 lbs. BP-108Crowned Cover (295 x 238 x 129) (247 x 196 x 123) (210 x 159) (273 x 152) (111) (209) (159) (6) (289) (8)JW1210HPL 13.56 x 11.43 x 5.21 11.79 x 9.80 x 4.94 10.25 x 8.25 12.75 x 8 4.5 10.25 8.25 0.25 13.41 0.31 6.5 lbs. BP-1210(344 x 291 x 132) (299 x 249 x 125) (260 x 210) (324 x 203) (114) (260) (209) (6) (341) (8)JW1212HPL 13.56 x 13.38 x 6.36 11.70 x 11.70 x 5.98 12.75 x 10.00 10.25 x 10.25 5.40 10.25 10.25 0.25 13.38 0.31 3.20 lbs. BP-1212(344 x 340 x 161) (297 x 297 x 152) (324 x 254) (260 x 260) (137) (260) (260) (6) (340) (8)JW1407HPL 15.87 x 8.75 x 6.81 14.00 x 7.00 x 6.56 12.75 x 5.75 15 x 5 6.12 12.25 5.25 0.25 15.75 0.31 6.25 lbs. BP-1407(403 x 222 x 173) (356 x 178 x 167) (324 x 146) (381 x 127) (156) (311) (133) (6) (400) (8)JW1412HPL 15.50 x 13.50 x 6.25 13.53 x 11.55 x 5.94 12.25 x 10.25 14.62 x 10 5.37 12.25 10.25 0.25 15.47 0.31 8.5 lbs. BP-1412(394 x 343 x 159) (344 x 293 x 151) (311 x 260) (371 x 254) (137) (311) (260) (6) (393) (8)JW1614HPL 17.53 x 15.46 x 6.23 15.63 x 13.60 x 5.94 14.25 x 12.25 16.75 x 12 5.36 14.25 12.25 0.25 17.45 0.31 11.5 lbs. BP-1614(445 x 393 x 158) (397 x 345 x 151) (362 x 311) (425 x 305) (136) (362) (311) (6) (443) (8)JW1816HPL** 19.62 x 17.61 x 8.82 17.69 x 15.69 x 8.45 16.25 x 14.25 18.88 x 12 7.99 16.25 14.25 0.25 19.61 0.31 19.25 lbs. BP-1816(498 x 447 x 224) (449 x 399 x 215) (413 x 362) (479 x 305) (203) (413) (362) (6) (498) (8)JW2016HPL** 22.00 x 17.68 x 8.83 19.72 x 15.72 x 8.45 18.25 x 14.25 21.25 x 10.00 8 18.25 14.25 0.25 21.68 0.31 20.25 BPJ2016(559 x 449 x 224) (501 x 399 x 215) (464 x 362) (540 x 254) (203) (464) (362) (6) (551) (8)All measures are in inches, items in parentheses are in millimeters.*Crowned cover – center of cover raised 3/4" **1816, 2016 sizes not 6, 6P Rated<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com140
Technical Specifications - “JW” Series“FHW” configuration - Fiberglass hinged, flush bonded window, 4 cover screwJWJW <strong>SE</strong>RIESFHW ConstructionMaterialGasket<strong>Non</strong> metallic hingeStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsBonded windowHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental sealCorrosive resistant, removable hinge<strong>300</strong> Series stainless used on all external hardwareMolded in flange for ease of mounting.Panel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsPrecision routed flush bonded window for maximum visibilityNOTES:JW1008FHWFHWIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixFHWBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326FHWModifications See Special ModRight Modification pg. 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322141<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“JW” Series “FHW” Configuration Technical DrawingsWStandard Flat CoverCrowned CoverFBHOLE DIA.4 PLC'S.CAEHCrowned CoverAvailable in 1008sizes onlyCAEHJW <strong>SE</strong>RIESNAAOMM<strong>SE</strong>CTION B-BBLBack Panel Available(See Accessories)JBDK<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVER“JW” Series <strong>Enclosures</strong> - “FHW” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CWINDOW AREA[MAXIMUM]MOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJW806FHW 9.62 x 7.50 x 4.74 7.73 x 5.74 x 4.45 6.25 x 4.25 8.88 x 4 4 6.25 4.25 0.25 9.5 0.31 3.5 lbs. BP-86(244 x 191 x 121) (196 x 146 x 113) (159 x 108) (225 x 101) (101) (159) (108) (6) (242) (8)JW808FHW 9.56 x 9.38 x 4.89 7.73 x 7.73 x 4.53 8.75 x 6.00 6.25 x 6.25 3.93 6.25 6.25 0.25 9.37 0.31 1.71 lbs. BP-88(243 x 238 x 124) (196 x 196 x 115) (222 x 152) (159 x 159) (100) (159) (159) (6) (238) (8)JW1008FHW 11.62 x 9.41 x 4.25 9.73 x 7.73 x 3.98 8.25 x 6.25 10.75 x 6 3.5 8.25 6.25 0.25 11.35 0.31 5 lbs. BP-108(295 x 239 x 108) (247 x 196 x 101) (210 x 159) (273 x 152) (89) (209) (159) (6) (288) (8)JW1008FHWA* 11.62 x 9.37 x 5.06 9.73 x 7.73 x 4.83 8.25 x 6.25 10.75 x 6 4.37 8.25 6.25 0.25 11.37 0.31 5 lbs. BP-108Crowned Cover (295 x 238 x 129) (247 x 196 x 123) (210 x 159) (273 x 152) (111) (209) (159) (6) (289) (8)JW1210FHW 13.56 x 11.43 x 5.21 11.79 x 9.80 x 4.94 10.25 x 8.25 12.75 x 8 4.5 10.25 8.25 0.25 13.41 0.31 6.5 lbs. BP-1210(344 x 291 x 132) (299 x 249 x 125) (260 x 210) (324 x 203) (114) (260) (209) (6) (341) (8)JW1212FHW 13.56 x 13.38 x 6.36 11.70 x 11.70 x 5.98 12.75 x 10.00 10.25 x 10.25 5.40 10.25 10.25 0.25 13.38 0.31 3.20 lbs. BP-1212(344 x 340 x 161) (297 x 297 x 152) (324 x 254) (260 x 260) (137) (260) (260) (6) (340) (8)JW1407FHW 15.87 x 8.75 x 6.81 14.00 x 7.00 x 6.56 12.75 x 5.75 15 x 5 6.12 12.25 5.25 0.25 15.75 0.31 6.25 lbs. BP-1407(403 x 222 x 173) (356 x 178 x 167) (324 x 146) (381 x 127) (156) (311) (133) (6) (400) (8)JW1412FHW 15.50 x 13.50 x 6.25 13.53 x 11.55 x 5.94 12.25 x 10.25 14.62 x 10 5.37 12.25 10.25 0.25 15.47 0.31 8.5 lbs. BP-1412(394 x 343 x 159) (344 x 293 x 151) (311 x 260) (371 x 254) (137) (311) (260) (6) (393) (8)JW1614FHW 17.53 x 15.46 x 6.23 15.63 x 13.60 x 5.94 14.25 x 12.25 16.75 x 12 5.36 14.25 12.25 0.25 17.45 0.31 11.5 lbs. BP-1614(445 x 393 x 158) (397 x 345 x 151) (362 x 311) (425 x 305) (136) (362) (311) (6) (443) (8)JW1816FHW** 19.62 x 17.61 x 8.82 17.69 x 15.69 x 8.45 16.25 x 14.25 18.88 x 12 7.99 16.25 14.25 0.25 19.61 0.31 19.25 lbs. BP-1816(498 x 447 x 224) (449 x 399 x 215) (413 x 362) (479 x 305) (203) (413) (362) (6) (498) (8)JW2016FHW** 22.00 x 17.68 x 8.83 19.72 x 15.72 x 8.45 18.25 x 14.25 21.25 x 10.00 8 18.25 14.25 0.25 21.68 0.31 20.25 BPJ2016(559 x 449 x 224) (501 x 399 x 215) (464 x 362) (540 x 254) (203) (464) (362) (6) (551) (8)All measures are in inches, items in parentheses are in millimeters.*Crowned cover – center of cover raised 3/4" **1816, 2016 sizes not 6, 6P Rated<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com142
Technical Specifications - “JW” Series“FHLL” configuration - Fiberglass hinged, flush bonded window, link lock latchJWJW <strong>SE</strong>RIESFHLL ConstructionMaterialGasket<strong>Non</strong> metallic hingeStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsBonded windowHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental sealCorrosive resistant, removeable hinge<strong>300</strong> Series stainless used on all external hardwareMolded in flange for ease of mounting.Panel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsPrecision routed flush bonded window for maximum visibilityJW1008FHLLNOTES:FHLL Industry StandardsUL/cUL 50Not ListedNEMA 250 1, 3, 12CSA Std C22.2Not ListedTemperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixFHLLBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326FHLLModifications See Special ModRight Modification pg. 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322143<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“JW” Series “FHLL” Configuration Technical DrawingsWStandard Flat CoverCrowned CoverFBHOLE DIA.4 PLC'S.CAEHCrowned CoverAvailable in 1008sizes onlyCAEHJW <strong>SE</strong>RIESNAAOMM<strong>SE</strong>CTION B-BBLBack Panel Available(See Accessories)JBDK<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVER“JW” Series <strong>Enclosures</strong> - “FHLL” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CWINDOW AREA[MAXIMUM]MOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJW806FHLL 9.62 x 7.50 x 4.74 7.73 x 5.74 x 4.45 6.25 x 4.25 8.88 x 4 4 6.25 4.25 0.25 9.5 0.31 3.5 lbs. BP-86(244 x 191 x 121) (196 x 146 x 113) (159 x 108) (225 x 101) (101) (159) (108) (6) (242) (8)JW808FHLL 9.56 x 9.38 x 4.89 7.73 x 7.73 x 4.53 8.75 x 6.00 6.25 x 6.25 3.93 6.25 6.25 0.25 9.37 0.31 1.71 lbs. BP-88(243 x 238 x 124) (196 x 196 x 115) (222 x 152) (159 x 159) (100) (159) (159) (6) (238) (8)JW1008FHLL 11.62 x 9.41 x 4.25 9.73 x 7.73 x 3.98 8.25 x 6.25 10.75 x 6 3.5 8.25 6.25 0.25 11.35 0.31 5 lbs. BP-108(295 x 239 x 108) (247 x 196 x 101) (210 x 159) (273 x 152) (89) (209) (159) (6) (288) (8)JW1008FHALL* 11.62 x 9.37 x 5.06 9.73 x 7.73 x 4.83 8.25 x 6.25 10.75 x 6 4.37 8.25 6.25 0.25 11.37 0.31 5 lbs. BP-108Crowned Cover (295 x 238 x 129) (247 x 196 x 123) (210 x 159) (273 x 152) (111) (209) (159) (6) (289) (8)JW1210FHLL 13.56 x 11.43 x 5.21 11.79 x 9.80 x 4.94 10.25 x 8.25 12.75 x 8 4.5 10.25 8.25 0.25 13.41 0.31 6.5 lbs. BP-1210(344 x 291 x 132) (299 x 249 x 125) (260 x 210) (324 x 203) (114) (260) (209) (6) (341) (8)JW1212FHLL 13.56 x 13.38 x 6.36 11.70 x 11.70 x 5.98 12.75 x 10.00 10.25 x 10.25 5.40 10.25 10.25 0.25 13.38 0.31 3.20 lbs. BP-1212(344 x 340 x 161) (297 x 297 x 152) (324 x 254) (260 x 260) (137) (260) (260) (6) (340) (8)JW1407FHLL 15.87 x 8.75 x 6.81 14.00 x 7.00 x 6.56 12.75 x 5.75 15 x 5 6.12 12.25 5.25 0.25 15.75 0.31 6.25 lbs. BP-1407(403 x 222 x 173) (356 x 178 x 167) (324 x 146) (381 x 127) (156) (311) (133) (6) (400) (8)JW1412FHLL 15.50 x 13.50 x 6.25 13.53 x 11.55 x 5.94 12.25 x 10.25 14.62 x 10 5.37 12.25 10.25 0.25 15.47 0.31 8.5 lbs. BP-1412(394 x 343 x 159) (344 x 293 x 151) (311 x 260) (371 x 254) (137) (311) (260) (6) (393) (8)JW1614FHLL 17.53 x 15.46 x 6.23 15.63 x 13.60 x 5.94 14.25 x 12.25 16.75 x 12 5.36 14.25 12.25 0.25 17.45 0.31 11.5 lbs. BP-1614(445 x 393 x 158) (397 x 345 x 151) (362 x 311) (425 x 305) (136) (362) (311) (6) (443) (8)JW1816FHLL** 19.62 x 17.61 x 8.82 17.69 x 15.69 x 8.45 16.25 x 14.25 18.88 x 12 7.99 16.25 14.25 0.25 19.61 0.31 19.25 lbs. BP-1816(498 x 447 x 224) (449 x 399 x 215) (413 x 362) (479 x 305) (203) (413) (362) (6) (498) (8)JW2016FHLL** 22.00 x 17.68 x 8.83 19.72 x 15.72 x 8.45 18.25 x 14.25 21.25 x 10.00 8 18.25 14.25 0.25 21.68 0.31 20.25 BPJ2016(559 x 449 x 224) (501 x 399 x 215) (464 x 362) (540 x 254) (203) (464) (362) (6) (551) (8)All measures are in inches, items in parentheses are in millimeters.*Crowned cover – center of cover raised 3/4" **1816, 2016 sizes not 6, 6P Rated<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com144
Technical Specifications - “JW” SeriesFHPL“FHPL” configuration - Fiberglass hinged, flush bonded window, padlock latchJWJW <strong>SE</strong>RIESFHPL ConstructionMaterialGasket<strong>Non</strong> metallic hingeStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsBonded windowHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental sealCorrosive resistant, removeable hinge<strong>300</strong> Series stainless used on all external hardwareMolded in flange for ease of mounting.Panel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsPrecision routed flush bonded window for maximum visibilityJW1008FHPLNOTES:FHPL Industry StandardsUL/cUL 50Not ListedNEMA 250 1, 3, 12CSA Std C22.2Not ListedTemperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixFHPLBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326FHPLModifications See Special ModRight Modification pg 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322145<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“JW” Series “FHPL” Configuration Technical DrawingsWStandard Flat CoverCrowned CoverFBHOLE DIA.4 PLC'S.CAEHCrowned CoverAvailable in 1008sizes onlyCAEHJW <strong>SE</strong>RIESNAAOMM<strong>SE</strong>CTION B-BBLBack Panel Available(See Accessories)JBDK<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVER“JW” Series <strong>Enclosures</strong> - “FHPL” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CWINDOW AREA[MAXIMUM]MOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJW806FHPL 9.62 x 7.50 x 4.74 7.73 x 5.74 x 4.45 6.25 x 4.25 8.88 x 4 4 6.25 4.25 0.25 9.5 0.31 3.5 lbs. BP-86(244 x 191 x 121) (196 x 146 x 113) (159 x 108) (225 x 101) (101) (159) (108) (6) (242) (8)JW808FHPL 9.56 x 9.38 x 4.89 7.73 x 7.73 x 4.53 8.75 x 6.00 6.25 x 6.25 3.93 6.25 6.25 0.25 9.37 0.31 1.71 lbs. BP-88(243 x 238 x 124) (196 x 196 x 115) (222 x 152) (159 x 159) (100) (159) (159) (6) (238) (8)JW1008FHPL 11.62 x 9.41 x 4.25 9.73 x 7.73 x 3.98 8.25 x 6.25 10.75 x 6 3.5 8.25 6.25 0.25 11.35 0.31 5 lbs. BP-108(295 x 239 x 108) (247 x 196 x 101) (210 x 159) (273 x 152) (89) (209) (159) (6) (288) (8)JW1008FHAPL* 11.62 x 9.37 x 5.06 9.73 x 7.73 x 4.83 8.25 x 6.25 10.75 x 6 4.37 8.25 6.25 0.25 11.37 0.31 5 lbs. BP-108Crowned Cover (295 x 238 x 129) (247 x 196 x 123) (210 x 159) (273 x 152) (111) (209) (159) (6) (289) (8)JW1210FHPL 13.56 x 11.43 x 5.21 11.79 x 9.80 x 4.94 10.25 x 8.25 12.75 x 8 4.5 10.25 8.25 0.25 13.41 0.31 6.5 lbs. BP-1210(344 x 291 x 132) (299 x 249 x 125) (260 x 210) (324 x 203) (114) (260) (209) (6) (341) (8)JW1212FHPL 13.56 x 13.38 x 6.36 11.70 x 11.70 x 5.98 12.75 x 10.00 10.25 x 10.25 5.40 10.25 10.25 0.25 13.38 0.31 3.20 lbs. BP-1212(344 x 340 x 161) (297 x 297 x 152) (324 x 254) (260 x 260) (137) (260) (260) (6) (340) (8)JW1407FHPL 15.87 x 8.75 x 6.81 14.00 x 7.00 x 6.56 12.75 x 5.75 15 x 5 6.12 12.25 5.25 0.25 15.75 0.31 6.25 lbs. BP-1407(403 x 222 x 173) (356 x 178 x 167) (324 x 146) (381 x 127) (156) (311) (133) (6) (400) (8)JW1412FHPL 15.50 x 13.50 x 6.25 13.53 x 11.55 x 5.94 12.25 x 10.25 14.62 x 10 5.37 12.25 10.25 0.25 15.47 0.31 8.5 lbs. BP-1412(394 x 343 x 159) (344 x 293 x 151) (311 x 260) (371 x 254) (137) (311) (260) (6) (393) (8)JW1614FHPL 17.53 x 15.46 x 6.23 15.63 x 13.60 x 5.94 14.25 x 12.25 16.75 x 12 5.36 14.25 12.25 0.25 17.45 0.31 11.5 lbs. BP-1614(445 x 393 x 158) (397 x 345 x 151) (362 x 311) (425 x 305) (136) (362) (311) (6) (443) (8)JW1816FHPL** 19.62 x 17.61 x 8.82 17.69 x 15.69 x 8.45 16.25 x 14.25 18.88 x 12 7.99 16.25 14.25 0.25 19.61 0.31 19.25 lbs. BP-1816(498 x 447 x 224) (449 x 399 x 215) (413 x 362) (479 x 305) (203) (413) (362) (6) (498) (8)JW2016FHPL** 22.00 x 17.68 x 8.83 19.72 x 15.72 x 8.45 18.25 x 14.25 21.25 x 10.00 8 18.25 14.25 0.25 21.68 0.31 20.25 BPJ2016(559 x 449 x 224) (501 x 399 x 215) (464 x 362) (540 x 254) (203) (464) (362) (6) (551) (8)All measures are in inches, items in parentheses are in millimeters.*Crowned cover – center of cover raised 3/4" **1816, 2016 sizes not 6, 6P Rated<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com146
The “JCC” Series JCCJCC <strong>SE</strong>RIESThe “JCC” SeriesThe JCC Series is clearly a great new product enhancement. Clear cover options for <strong>Stahlin</strong>’s J Series. For thefirst time you can benefit from the exceptional performance of <strong>Stahlin</strong>’s J Series complemented with the openview of a polycarbonate cover.PLUS...There is no compromise in NEMA rated performance. We’ll give you 4X, 12 and 6P protection all in oneattractive, highly functional package!Our J Series has been delivering proven performance for nearly50 years with more than <strong>300</strong> configurations and 13 sizesranging from 6x4 to 20x16. No other non-metallic enclosurecan match the range of this product offering.Featured HighlightsSeries “JCC” Integral Mounting FlangeOur two new square profiles bring you even moreversatility in appearance and functionality. Plus, the8x8 and 12x12 are available in all configurations.SeamlessPolyurethaneDoor GasketEconomical“JCC” Series Attributes●7 configurations available in 2 sizes● Available in 8 x 8 to 12 x 12●●7 cover securement methods availableIntegrally molded mounting flange● Submersion rated● Flame retardant, UV resistant, clearpolycarbonate cover“JCC” Series SpecificationsSolid ConstructionCompression Molded,Fiberglass ReinforcedPolyesterIndustrial ToughModest Overhang CoverLatch Mechanism• Padlock Latch• Link Lock Latch●Water tight●Fire resistant●UL/cUL approved●Submersible●Light weight●CSA approved●Corrosion Resistant● Rated NEMA 1, 3, 4X, 6P, 12LISTEDLISTEDThe “JCC” Series is Applicable for Many Industries including:OEM &instrumentation designs Moveable Platforms Rendering Plants SCADA Systems
JCC <strong>SE</strong>RIESThe “JCC” Series● Two basic sizes● Four basic concepts● Seven configurations(W, HW, HLL, HPL, FHW, FHLL, FHPL)
The “JCC” SeriesJCC“JCC” Series Shared CharacteristicsJCC <strong>SE</strong>RIESConstructionCover Screw Inserts Brass, #10 - 24Back Panel Brass, #10 - 32Mounting FeetIntegrally MoldedHardware<strong>300</strong> Series Stainless SteelPhysical CharacteristicsThe JCC Series is clearly a great new product enhancement. Clearcover options for <strong>Stahlin</strong>’s J Series. For the first time you can benefitfrom the exceptional performance of <strong>Stahlin</strong>’s J Series complementedwith the open view of a polycarbonate cover.Opaque FRPClear CoverGasketUV resistant SolarGuardFlame retardant, UV resistant, clearpolycarbonateFIP Urethane, Seamless“JCC” Series Ordering InformationUse the information below to derive specific catalog numbers. <strong>Stahlin</strong>catalog numbers first begin with Family ID, then size ID andconfiguration ID as a suffix. See the example below.Ordering Information - Deriving <strong>Catalog</strong> NumbersFamily ID Size ID Configuration ID EXAMPLEJCC XXXX Conf. ID = “JCC808W”“JCC” Series - Inside DimensionsSize ID H x W x D Optional Panel #JCC808 7.73 x 7.73 x 4.82 BP88JCC1212 11.70 x 11.70 x 6.29 BP1212Industry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature RangeFlammability RatingWindow flammabilityFRP ToxicityChemical Resistance(-40°F to +250°F) (-40°C to +120°C)UL94-5VUL94V-0<strong>Non</strong>-HaloginatedFull chemical resistance charts listed inappendixOptional back panels available in various materials. See page 329.“JCC” Series - ConfigurationsConfigurationIDDESCRIPTIONWHWHLLHPLFHWFHLLFHPL4 cover screws, flush bonded window, lift off cover configurationHinged, flush bonded window, 2 cover screws configurationHinged, flush bonded window, link lock latch configurationHinged, flush bonded window, padlock latch configurationFiberglass hinged, flush mounted window, 4 cover screws config.Fiberglass hinged, flush mounted window, link lock latch config.Fiberglass hinged, flush mounted window, padlock latch config.149<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“JCC” Series ConfigurationsW4 cover screwsDesign Features● FIP Urethane, Seamless Gasket● <strong>300</strong> Series Stainless Steel● Integrally Molded Mounting Feet● Back Panel & Cover Screw Inserts: Brass,#10 - 32, #10-24● Flame retardant, UV resistant, clear polycarbonateClear Cover● Opaque FRP - UV resistant SolarGuardJCC <strong>SE</strong>RIESJCC1212WHWHinged, 2 cover screwsDesign Features● FIP Urethane, Seamless Gasket● <strong>300</strong> Series Stainless Steel● Integrally Molded Mounting Feet● Back Panel & Cover Screw Inserts: Brass,#10 - 32, #10-24● Flame retardant, UV resistant, clear poly carbonateClear Cover● Opaque FRP - UV resistant SolarGuard● Opaque FRP - UV resistant SolarGuardJCC1212HWHLLHinged, link lock latchDesign Features● FIP Urethane, Seamless Gasket● <strong>300</strong> Series Stainless Steel● Integrally Molded Mounting Feet● Back Panel & Cover Screw Inserts: Brass, #10 - 32, #10-24● Flame retardant, UV resistant, clear poly carbonate Clear Cover● Opaque FRP - UV resistant SolarGuardJCC1212HLL<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com150
“JCC” Series ConfigurationsHPLHinged, pull latchJCC <strong>SE</strong>RIESDesign Features● FIP Urethane, Seamless Gasket● <strong>300</strong> Series Stainless Steel● Integrally Molded Mounting Feet● Back Panel & Cover Screw Inserts: Brass, #10 - 32, #10-24● Flame retardant, UV resistant, clear poly carbonate Clear Cover● Opaque FRP - UV resistant SolarGuardJCC808HPLFHWFiberglass hinged, 4 cover screwsDesign Features● FIP Urethane, Seamless Gasket● <strong>300</strong> Series Stainless Steel● Integrally Molded Mounting Feet● Back Panel & Cover Screw Inserts: Brass, #10 - 32, #10-24● Flame retardant, UV resistant, clear poly carbonate Clear Cover● Opaque FRP - UV resistant SolarGuardJCC1212FHWFHLLFiberglass hinged, link lock latchDesign Features● Fiberglass hinge for maximum corrosion resistance● Removable lift off cover capability● Padlock latch for quick entry and added security● Full 180°+ door openingJCC1212FHLL151<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“JCC” Series ConfigurationsFHPLFiberglass hinged, padlock latchDesign Features● Fiberglass hinge for maximum corrosion resistance● Removable lift off cover capability● Padlock latch for quick entry and added security● Full 180°+ door openingJCC <strong>SE</strong>RIESJCC808FHPL“STAHLIN INFORMATION CENTER”Clearly A Great <strong>Product</strong>!The Clear Cover JCC SeriesWe’ve heard you asking...and we're delivering clear covers for two sizes--- 8x8 and 12x12 --- in <strong>Stahlin</strong>’s popular J Series.You can benefit from the exceptional performance of <strong>Stahlin</strong>’s J Series complemented with the open view of apolycarbonate cover.Plus...There is no compromise in NEMA rated performance. We’ll give you 4X, 12 and 6P protection all in one attractive,highly functional package!Our J Series has been delivering proven performance for nearly 50 years with more than <strong>300</strong> configurations and 13sizes ranging from 6x4 to 20x16. No other non-metallic enclosure can match the range of this product offering.Our two square profiles bring you even more versatility in appearance and functionality. Plus, the 8x8 and 12x12are available in all configurations including a raised cover option for even greater depth of usable space.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com152
WTechnical Specifications - “JCC” Series“W” configuration - 4 cover screwsJCCJCC <strong>SE</strong>RIESWConstructionCover Screw Inserts Brass, #10 - 32, #10-24Back Panel Brass, #10 - 32, #10-24Mounting FeetIntegrally MoldedHardware<strong>300</strong> Series Stainless SteelWIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0FRP Toxicity<strong>Non</strong>-HaloginatedChemical Resistance Full chemical resistance charts listed in appendixJCC1212WNOTES:WAccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326WModifications See Special ModRight Modification pg. 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322153<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“JCC” Series “W” Configuration Technical DrawingsJCC <strong>SE</strong>RIES“JCC” Series <strong>Enclosures</strong> - “W” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJCC 808W 9.56 x 9.47 x 5.09 7.73 x 7.73 x 4.82 8.75 x 6.00 4.24 6.25 6.25 0.25 9.46 0.31 1.67 lbs. BP-88(243 x 241 x 129) (196 x 196 x 123) (222x152) (108) (159) (159) (6) (240) (8)JCC 1212W 13.56 x 13.47 x 6.56 11.70 x 11.70 x 6.29 12.75 x 10.00 5.71 10.25 10.25 0.25 13.47 0.31 3.17 lbs. BP-1212(344 x 342 x 167) (297 x 297 x 160) (324 x 254) (145) (260) (260) (6) (342) (8)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com154
HWTechnical Specifications - “JCC” Series“HW” configuration - Hinged, 2 cover screwsJCCJCC <strong>SE</strong>RIESHW ConstructionCover Screw Inserts Brass, #10 - 32, #10-24Back Panel Brass, #10 - 32, #10-24Mounting FeetIntegrally MoldedHardware<strong>300</strong> Series Stainless SteelHWIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0FRP Toxicity<strong>Non</strong>-HaloginatedChemical Resistance Full chemical resistance charts listed in appendixJCC1212HWNOTES:HWBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326HWModifications See Special ModRight Modification pg. 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322155<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“JCC” Series “HW” Configuration Technical DrawingsJCC <strong>SE</strong>RIES“JCC” Series <strong>Enclosures</strong> - “HW” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJCC 808HW 9.56 x 9.47 x 5.09 7.73 x 7.73 x 4.82 8.75 x 6.00 4.24 6.25 6.25 0.25 9.46 0.31 1.67 lbs. BP-88(243 x 241 x 129) (196 x 196 x 123) (222x152) (108) (159) (159) (6) (240) (8)JCC 1212HW 13.56 x 13.47 x 6.56 11.70 x 11.70 x 6.29 12.75 x 10.00 5.71 10.25 10.25 0.25 13.47 0.31 3.17 lbs. BP-1212(344 x 342 x 167) (297 x 297 x 160) (324 x 254) (145) (260) (260) (6) (342) (8)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com156
Technical Specifications - “JCC” SeriesHLL“HLL” configuration - Hinged, link lock latchJCCJCC <strong>SE</strong>RIESHLLConstructionCover Screw Inserts Brass, #10 - 32, #10-24Back Panel Brass, #10 - 32, #10-24Mounting FeetIntegrally MoldedHardware<strong>300</strong> Series Stainless SteelHLLIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0FRP Toxicity<strong>Non</strong>-HaloginatedChemical Resistance Full chemical resistance charts listed in appendixJCC1212HLLNOTES:HLLBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326HLLModifications See Special ModRight Modification pg. 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322157<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“JCC” Series “HLL” Configuration Technical DrawingsJCC <strong>SE</strong>RIES“JCC” Series <strong>Enclosures</strong> - “HLL” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJCC 808HLL 9.56 x 9.47 x 5.09 7.73 x 7.73 x 4.82 8.75 x 6.00 4.24 6.25 6.25 0.25 9.46 0.31 1.67 lbs. BP-88(243 x 241 x 129) (196 x 196 x 123) (222x152) (108) (159) (159) (6) (240) (8)JCC 1212HLL 13.56 x 13.47 x 6.56 11.70 x 11.70 x 6.29 12.75 x 10.00 5.71 10.25 10.25 0.25 13.47 0.31 3.17 lbs. BP-1212(344 x 342 x 167) (297 x 297 x 160) (324 x 254) (145) (260) (260) (6) (342) (8)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com158
Technical Specifications - “JCC” SeriesHPL“HPL” configuration - Hinged, pull latchJCCJCC <strong>SE</strong>RIESHPLConstructionCover Screw Inserts Brass, #10 - 32, #10-24Back Panel Brass, #10 - 32, #10-24Mounting FeetIntegrally MoldedHardware<strong>300</strong> Series Stainless SteelHPLIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0FRP Toxicity<strong>Non</strong>-HaloginatedChemical Resistance Full chemical resistance charts listed in appendixJCC808HPLNOTES:HPLBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326HPLModifications See Special ModRight Modification pg. 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322159<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“JCC” Series “HPL” Configuration Technical DrawingsJCC <strong>SE</strong>RIES“JCC” Series <strong>Enclosures</strong> - “HPL” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJCC 808HPL 9.56 x 9.47 x 5.09 7.73 x 7.73 x 4.82 8.75 x 6.00 4.24 6.25 6.25 0.25 9.46 0.31 1.67 lbs. BP-88(243 x 241 x 129) (196 x 196 x 123) (222x152) (108) (159) (159) (6) (240) (8)JCC 1212HPL 13.56 x 13.47 x 6.56 11.70 x 11.70 x 6.29 12.75 x 10.00 5.71 10.25 10.25 0.25 13.47 0.31 3.17 lbs. BP-1212(344 x 342 x 167) (297 x 297 x 160) (324 x 254) (145) (260) (260) (6) (342) (8)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com160
Technical Specifications - “JCC” Series“FHW” configuration - Fiberglass hinged, 4 cover screwsJCCJCC <strong>SE</strong>RIESFHWConstructionCover Screw Inserts Brass, #10 - 32, #10-24Back Panel Brass, #10 - 32, #10-24Mounting FeetIntegrally MoldedHardware<strong>300</strong> Series Stainless SteelFHWIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0FRP Toxicity<strong>Non</strong>-HaloginatedChemical Resistance Full chemical resistance charts listed in appendixJCC1212FHWNOTES:FHWBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326FHWModifications See Special ModRight Modification pg. 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322161<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“JCC” Series “FHW” Configuration Technical DrawingsJCC <strong>SE</strong>RIES“JCC” Series <strong>Enclosures</strong> - “FHW” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJCC 808FHW 9.56 x 9.47 x 5.09 7.73 x 7.73 x 4.82 8.75 x 6.00 4.24 6.25 6.25 0.25 9.46 0.31 1.67 lbs. BP-88(243 x 241 x 129) (196 x 196 x 123) (222x152) (108) (159) (159) (6) (240) (8)JCC 1212FHW 13.56 x 13.47 x 6.56 11.70 x 11.70 x 6.29 12.75 x 10.00 5.71 10.25 10.25 0.25 13.47 0.31 3.17 lbs. BP-1212(344 x 342 x 167) (297 x 297 x 160) (324 x 254) (145) (260) (260) (6) (342) (8)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com162
Technical Specifications - “JCC” Series“FHLL” configuration - Fiberglass hinged, link lock latchJCCJCC <strong>SE</strong>RIESFHLLConstructionCover Screw Inserts Brass, #10 - 32, #10-24Back Panel Brass, #10 - 32, #10-24Mounting FeetIntegrally MoldedHardware<strong>300</strong> Series Stainless SteelFHLLIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0FRP Toxicity<strong>Non</strong>-HaloginatedChemical Resistance Full chemical resistance charts listed in appendixJCC1212FHLLNOTES:FHLLBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326FHLLModifications See Special ModRight Modification pg. 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322163<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“JCC” Series “FHLL” Configuration Technical DrawingsJCC <strong>SE</strong>RIES“JCC” Series <strong>Enclosures</strong> - “FHLL” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJCC 808FHLL 9.56 x 9.47 x 5.09 7.73 x 7.73 x 4.82 8.75 x 6.00 4.24 6.25 6.25 0.25 9.46 0.31 1.67 lbs. BP-88(243 x 241 x 129) (196 x 196 x 123) (222x152) (108) (159) (159) (6) (240) (8)JCC 1212FHLL 13.56 x 13.47 x 6.56 11.70 x 11.70 x 6.29 12.75 x 10.00 5.71 10.25 10.25 0.25 13.47 0.31 3.17 lbs. BP-1212(344 x 342 x 167) (297 x 297 x 160) (324 x 254) (145) (260) (260) (6) (342) (8)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com164
Technical Specifications - “JCC” SeriesFHPL“FHPL” configuration - Fiberglass hinged, padlock latchJCCJCC <strong>SE</strong>RIESFHPLConstructionCover Screw Inserts Brass, #10 - 32, #10-24Back Panel Brass, #10 - 32, #10-24Mounting FeetIntegrally MoldedHardware<strong>300</strong> Series Stainless SteelFHPLIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0FRP Toxicity<strong>Non</strong>-HaloginatedChemical Resistance Full chemical resistance charts listed in appendixJCC1212FHPLNOTES:FHPLBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 323Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326FHPLModifications See Special ModRight Modification pg. 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322165<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“JCC” Series “FHPL” Configuration Technical DrawingsJCC <strong>SE</strong>RIES“JCC” Series <strong>Enclosures</strong> - “FHPL” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJCC 808FHPL 9.56 x 9.47 x 5.09 7.73 x 7.73 x 4.82 8.75 x 6.00 4.24 6.25 6.25 0.25 9.46 0.31 1.67 lbs. BP-88(243 x 241 x 129) (196 x 196 x 123) (222x152) (108) (159) (159) (6) (240) (8)JCC 1212FHPL 13.56 x 13.47 x 6.56 11.70 x 11.70 x 6.29 12.75 x 10.00 5.71 10.25 10.25 0.25 13.47 0.31 3.17 lbs. BP-1212(344 x 342 x 167) (297 x 297 x 160) (324 x 254) (145) (260) (260) (6) (342) (8)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com166
The “RJ” Series RJRJ <strong>SE</strong>RIESThe “RJ” SeriesThe “RJ” Series enclosures also follow the original design of fiberglass enclosure products featuring an overhang cover on aflange mounted base. The variation refers to a “raised” or “deeper” cover that does not affect the height of the base. <strong>Product</strong>sthat are engineered into a “J” series footprint but which require an additional inch and a half depth to accommodate tall orelongated components will find that this enclosure fully meets their requirements. Unobstructed side-walls, built in mountingcapabilities and depth of cover offer a full range of possibilities when working with this enclosure.“RJ” series enclosures are designed for general electrical and electronicapplications and any application that has associated environmentalconcerns. Simple in its design, the enclosure can be configuredwith cutouts, windows and modifications that make your finishedproduct truly unique.Integral Mounting Flange“RJ” series products accommodate standard backpanel mounting but offer a range of panels, including anelevated dead front panel that is highly visible through aRaised Cover ForAdditional Depthcover mounted window. This feature can beparticularly effective with cover mounted components.“RJ” Series Attributes● Overhang cover on smooth sided base● Extra depth in cover for cover mountedcomponents● All stainless hardware latches and screws● Full length stainless steel hinge● Chemically resistant fiberglass reinforcedpolyester● Submersible, non corrosive, environmental designs● Exclusive stainless steel retention chain onscrew covers“RJ” Series SpecificationsPolyurethaneDoor GasketEconomicalIndustrial ToughFeatured HighlightsSeries “RJ” Solid ConstructionCompression MoldedFiberglass ReinforcedPolyesterLatch Mechanism• Padlock Latch• Link Lock Latch●Water tight●Fire resistant●UL/cUL approved●Submersible●Light weight●CSA ApprovedLISTEDLISTED●Corrosion resistant● Rated NEMA 1, 3, 4X,6P, 12The “RJ” Series is Applicable for Many Industries including:OEM &Instrumentation DesignsPump Control SystemsWater &Wastewater ProcessingAutomaticOiling Systems
RJ <strong>SE</strong>RIESThe “RJ” Series● Eleven basic sizes● Four basic concepts● Seven configurations(W, HW, HLL, HPL, FHW, FHLL, FHPL)
The “RJ” SeriesRJRJ <strong>SE</strong>RIESThe “RJ” Series Family consists of fourbasic concepts: screw downcover, hinged cover with screwdown, a twist lock latch and apadlock latch. There areeleven basic sizes in therange. Simple screw downcover style enclosuresemploy an industryexclusive stainless steelretention chain. Each ofthese configurations isequally at home inaggressive environmentsor cosmetically challengedinstallations.“RJ” Series Ordering InformationUse the information below to derive specific catalog numbers. <strong>Stahlin</strong>catalog numbers first begin with Family ID, then size ID and configurationID as a suffix. See the example below.Ordering Information - Deriving <strong>Catalog</strong> NumbersFamily ID Size ID Configuration ID EXAMPLERJ XXXX Conf. ID = “RJ604W”“RJ” Series - Inside DimensionsSize ID H x W x D Optional Panel #RJ604 5.84 x 3.85 x 5.95 BP64RJ606 5.72 x 5.72 x 5.95 BP66RJ806 7.73 x 5.74 x 5.95 BP86RJ808 7.73 x 7.73 x 4.82 BP88RJ1008 9.73 x 7.73 x 6.36 BP108RJ1210 11.79 x 9.80 x 6.32 BP1210RJ1212 11.70 x 11.70 x 6.29 BP1212RJ1412 13.53 x 11.55 x 7.45 BP1412RJ1614 15.63 x 13.60 x 7.45 BP1614RJ1816 17.69 x 15.69 x 10.31 BP1816RJ2016 19.72 x 15.72 x 10.33 BPJ2016Optional back panels available in various materials. See page 329“RJ” Series - ConfigurationsConfigurationIDDESCRIPTIONW4 cover screws, lift off cover configurationHWHinged, 2 cover screws configurationHLL Hinged, link lock latch configurationHPL Hinged, padlock latch configurationFHW Fiberglass hinged, 4 cover screws configurationFHLL Fiberglass hinged, link lock latch configurationFHPL Fiberglass hinged, padlock latch configuration“RJ” Series Shared CharacteristicsConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareCover depthMolded in Mounting FlangeMounting BossesMetal insertsSoft Edge DesignPhysical Characteristics<strong>Non</strong> corrosiveWater-tightDust-tightImpact resistant<strong>Non</strong> ConductiveLight weightUV resistantWorkable materialEasy maintenancePleasing aestheticsColor/FinishIndustry StandardsHot compression molded fiberglassreinforced polyesterPoured polyurethane seamlessgasket provides watertight, dust-tightenvironmental sealNo protruding surfaces<strong>300</strong> Series stainless used on allexternal hardwareExtra depth molded into coverIntegral flange molded in place forease of mountingPanel mounting capability for fixedrear panelAll bosses utilize threaded brass insertsaccepting 10-32 screwsRounded edges, minimal protrusions orexposed pocket areas for assembly ofdust and debrisStands up to an exceptionally broadrange of chemical exposuresRated watertight and submersible for aprolonged periodResults in an environmentally sealed,environmentally sound spaceResilient material with high impactresistanceDouble insulated material. No incidentalelectrical contactSolid construction in a lightweightdesignMinimizes the affects of sunlightCuts, drills, punches, and saws withease and accuracyScratches and gouges can be restoredwith a petroleum jelly productSmooth lines, soft colors easily blendinto customer’s design conceptsSmooth surface, no color variations,swirls, or color pockets, no voids.Color described as Glacier GrayUL/cUL 50File E64358Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2File LR069014Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow flammability UL94V-0Self extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed inappendix169<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“RJ” Series Configurationscontinued on following pagesW4 cover screws, lift off coverDesign Features● Lift off cover design● Surface flat stainless steel screw● Integral mounting flange● Extended depth in cover● Overhang cover● Stainless steel beaded cover retention chainRJ <strong>SE</strong>RIESRJ1008WHWHinged, 2 cover screwsDesign Features● Full length stainless steel hinged cover● Surface flat stainless steel screws● Full 180°+ door opening● Extended depth coverRJ1008HWHLLHinged, link lock latchDesign Features● Link lock latch for quick entry● Latch lies flat on side of enclosure● Can be lifted and turned with ease● Full 180°+ door openingRJ1008HLL<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com170
“RJ” Series ConfigurationsHPLHinged, padlock latchRJ <strong>SE</strong>RIESDesign Features● Padlock latch for quick entry● Snap catch concept with toggle action● Integral hasp provides secure loop for padlock (padlock not included)● Can be lifted and released with ease● Full 180°+ door openingRJ1210HPLFHWFiberglass hinged, four cover screwsDesign Features● Fiberglass hinge provides maximum corrosion resistance● Pan head stainless steel screws maintain low profile on cover● Four cover screws configuration secures cover● Full 180°+ door openingRJ1008FHWFHLLFiberglass hinged, link lock latchDesign Features● Fiberglass hinge for maximum corrosion resistance● Removable lift off cover capability● Link lock latch mechanism for easy entry● Full 180°+ door opening● Extended depth coverRJ1008FHLL171<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“RJ” Series ConfigurationsFHPLFiberglass hinged, padlock latchDesign Features● Fiberglass hinge for maximum corrosion resistance● Removable lift off cover capability● Padlock latch for quick entry and security capabilities● Extended depth cover● Full 180°+ door openingRJ <strong>SE</strong>RIESRJ1210FHPL“STAHLIN INFORMATION CENTER”<strong>Stahlin</strong> enclosures meet a wide range of NEMA standards as referenced in the technical sections of this catalog. Eachenclosure meets those standards by a combination of gasket, hinges and latch mechanisms. In smaller sizes, only a singlelatch is required. In larger sizes, a pair of latches is used, whether this is a padlock or link lock type latch. This predeterminedselection varies from one enclosure style to another. In the "J/JW/RJ/RJW" series, enclosures 8x6 and smalleruse only a single latch. <strong>Enclosures</strong> 10x8 and larger use two latches. Also see the Classic Series pages for latchconfigurations specific to that series.Latching Specifications: One Latch or TwoTwo Latches on these sizesSingle Latch on these sizes6 x 4 6 x 6 8 x 6 8 x 8 10 x 8 12 x 10 12 x 12 14 x 12 16 x1418 x 1620 x16RJ806HLLSingle LatchRJ1008HLL2 Latches<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com172
WTechnical Specifications - “RJ” Series“W” configuration - 4 cover screws, lift off coverRJRJ <strong>SE</strong>RIESWConstructionMaterialGasketPan head screwsStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsSoft Edge DesignCover retention chainHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental sealMinimizes protruding surfaces<strong>300</strong> Series stainless used on all external hardwareIntegral flange molded in place for ease of mountingPanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisStainless steel beaded chain for securing cover after lift offWIndustry StandardsNOTES:RJ1210WUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixWAccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 322Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326WModifications See Special ModRight Modification pg 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322173<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“RJ” Series “W” Configuration Technical DrawingsWBFHOLE DIA.4 PLC'S.CRJ <strong>SE</strong>RIESNAAOAEHBMP<strong>SE</strong>CTION B-BLBack Panel Available(see page 329)JDBK<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVER“RJ” Series <strong>Enclosures</strong> - “W” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M N O PHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERRJ604W 7.50 x 5.47 x 6.22 5.84 x 3.85 x 5.95 6.75 x 2 5.49 4.25 2.25 0.25 7.45 5.31 3.34 0.31 2.5 lbs. BP-64(191 x 139 x 158) (148 x 98 x 151) (171 x 51) (140) (108) (57) (6) (189) (135) (85) (8)RJ606W 7.50 x 7.52 x 6.22 5.72 x 5.72 x 5.95 6.75 x 4 5.49 4.25 4.25 0.25 7.52 5.34 5.31 0.31 2.75 lbs. BP-66(191 x 191 x 158) (145 x 145 x 151) (171 x 101) (140) (108) (108) (6) (191) (136) (135) (8)RJ806W 9.62 x 7.46 x 6.22 7.73 x 5.74 x 5.95 8.88 x 4 5.49 6.25 4.25 0.25 9.36 7.25 5.28 0.31 3.5 lbs. BP-86(244 x 190 x158) (196 x 146 x 151) (225 x 101) (140) (159) (108) (6) (238) (185) (134) (8)RJ808W 9.56 x 9.38 x 6.26 7.73 x 7.73 x 6.01 8.75 x 6.00 5.43 6.25 6.25 0.25 9.37 7.17 7.17 0.31 1.84 lbs. BP-88(243 x 238 x 159) (196 x 196 x 153) (222 x 152) (138) (159) (159) (6) (238) (182) (182) (8)RJ1008W 11.62 x 9.37 x 6.61 9.73 x 7.73 x 6.36 10.75 x 6 5.91 8.25 6.25 0.25 11.38 9.3 7.38 0.31 5 lbs. BP-108(295 x 238 x 168) (247 x 196 x 162) (273 x 152) (150) (209) (159) (6) (289) (236) (188) (8)RJ1210W 13.56 x 11.43 x 6.61 11.79 x 9.80 x 6.32 12.75 x 8 5.87 10.25 8.25 0.25 13.41 11.2 9.23 0.31 6.5 lbs. BP-1210(344 x 291 x 168) (299 x 249 x 161) (324 x 203) (149) (260) (209) (6) (341) (284) (234) (8)RJ1212W 13.56 x 13.38 x 7.73 11.70 x 11.70 x 7.48 12.75 x 10.00 6.90 10.25 10.25 0.25 13.38 11.17 11.17 0.31 3.34 lbs. BP-1212(344 x 340 x 196) (297 x 297 x 190) (324 x 254) (175) (260) (260) (6) (340) (284) (284) (8)RJ1412W 15.50 x 13.38 x 7.69 13.53 x 11.55 x 7.45 14.62 x 10 6.87 12.25 10.25 0.25 15.42 13.2 11.16 0.31 8.5 lbs. BP-1412(394 x 340 x 195) (344 x 293 x 189) (371 x 254) (174) (311) (260) (6) (392) (335) (284) (8)RJ1614W 17.53 x 15.43 x 7.71 15.63 x 13.60 x 7.45 16.75 x 12 6.87 14.25 12.25 0.25 17.43 15.2 13.24 0.31 11.5 lbs. BP-1614(445 x 392 x 196) (397 x 345 x 189) (425 x 305) (174) (362) (311) (6) (443) (386) (336) (8)RJ1816HW 19.62 x 17.48 x 10.62 17.69 x 15.69 x 10.31 18.88 x 12 9.86 16.25 14.25 0.25 19.49 17.25 15.25 0.31 19.25 lbs. BP-1816(498 x 444 x 270) (449 x 399 x 262) (479 x 305) (250) (413) (362) (6) (495) (438) (387) (8)RJ2016W 22.00 x 17.56 x 10.64 19.72 x 15.72 x 10.33 21.25 x 10.00 9.87 18.25 14.25 0.25 21.56 19.31 15.39 0.31 20.25 lbs. BPJ2016(559 x 446 x 270) (501 x 399 x 262) (540 x 254) (251) (464) (362) (6) (548) (490) (391) (8)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com174
HWTechnical Specifications - “RJ” Series“HW” configuration - Hinged, 2 cover screwsRJRJ <strong>SE</strong>RIESHW ConstructionMaterialGasketPan head screwsStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsSoft Edge DesignRaised coverHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental sealMinimizes protruding surfaces<strong>300</strong> Series stainless used on all external hardwareIntegral flange molded in place for ease of mountingPanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisExtended depth in coverRJ1008HWNOTES:HWIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixHWBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 322Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326HWModifications See Special ModRight Modification pg 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322175<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“RJ” Series “HW” Configuration Technical DrawingsWBFHOLE DIA.4 PLC'S.CRJ <strong>SE</strong>RIESNAAOAEHBMP<strong>SE</strong>CTION B-BLBack Panel Available(see page 329)JDBK<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVER“RJ” Series <strong>Enclosures</strong> - “HW” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M N O PHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERRJ604HW 7.50 x 5.47 x 6.22 5.84 x 3.85 x 5.95 6.75 x 2 5.49 4.25 2.25 0.25 7.45 5.31 3.34 0.31 2.5 lbs. BP-64(191 x 139 x 158) (148 x 98 x 151) (171 x 51) (140) (108) (57) (6) (189) (135) (85) (8)RJ606HW 7.50 x 7.52 x 6.22 5.72 x 5.72 x 5.95 6.75 x 4 5.49 4.25 4.25 0.25 7.52 5.34 5.31 0.31 2.75 lbs. BP-66(191 x 191 x 158) (145 x 145 x 151) (171 x 101) (140) (108) (108) (6) (191) (136) (135) (8)RJ806HW 9.62 x 7.46 x 6.22 7.73 x 5.74 x 5.95 8.88 x 4 5.49 6.25 4.25 0.25 9.36 7.25 5.28 0.31 3.5 lbs. BP-86(244 x 190 x158) (196 x 146 x 151) (225 x 101) (140) (159) (108) (6) (238) (185) (134) (8)RJ808HW 9.56 x 9.38 x 6.26 7.73 x 7.73 x 6.01 8.75 x 6.00 5.43 6.25 6.25 0.25 9.37 7.17 7.17 0.31 1.84 lbs. BP-88(243 x 238 x 159) (196 x 196 x 153) (222 x 152) (138) (159) (159) (6) (238) (182) (182) (8)RJ1008HW 11.62 x 9.37 x 6.61 9.73 x 7.73 x 6.36 10.75 x 6 5.91 8.25 6.25 0.25 11.38 9.3 7.38 0.31 5 lbs. BP-108(295 x 238 x 168) (247 x 196 x 162) (273 x 152) (150) (209) (159) (6) (289) (236) (188) (8)RJ1210HW 13.56 x 11.43 x 6.61 11.79 x 9.80 x 6.32 12.75 x 8 5.87 10.25 8.25 0.25 13.41 11.2 9.23 0.31 6.5 lbs. BP-1210(344 x 291 x 168) (299 x 249 x 161) (324 x 203) (149) (260) (209) (6) (341) (284) (234) (8)RJ1212HW 13.56 x 13.38 x 7.73 11.70 x 11.70 x 7.48 12.75 x 10.00 6.90 10.25 10.25 0.25 13.38 11.17 11.17 0.31 3.34 lbs. BP-1212(344 x 340 x 196) (297 x 297 x 190) (324 x 254) (175) (260) (260) (6) (340) (284) (284) (8)RJ1412HW 15.50 x 13.38 x 7.69 13.53 x 11.55 x 7.45 14.62 x 10 6.87 12.25 10.25 0.25 15.42 13.2 11.16 0.31 8.5 lbs. BP-1412(394 x 340 x 195) (344 x 293 x 189) (371 x 254) (174) (311) (260) (6) (392) (335) (284) (8)RJ1614HW 17.53 x 15.43 x 7.71 15.63 x 13.60 x 7.45 16.75 x 12 6.87 14.25 12.25 0.25 17.43 15.2 13.24 0.31 11.5 lbs. BP-1614(445 x 392 x 196) (397 x 345 x 189) (425 x 305) (174) (362) (311) (6) (443) (386) (336) (8)RJ1816HW 19.62 x 17.48 x 10.62 17.69 x 15.69 x 10.31 18.88 x 12 9.86 16.25 14.25 0.25 19.49 17.25 15.25 0.31 19.25 lbs. BP-1816(498 x 444 x 270) (449 x 399 x 262) (479 x 305) (250) (413) (362) (6) (495) (438) (387) (8)RJ2016HW 22.00 x 17.56 x 10.64 19.72 x 15.72 x 10.33 21.25 x 10.00 9.87 18.25 14.25 0.25 21.56 19.31 15.39 0.31 20.25 lbs. BPJ2016(559 x 446 x 270) (501 x 399 x 262) (540 x 254) (251) (464) (362) (6) (548) (490) (391) (8)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com176
Technical Specifications - “RJ” SeriesHLL“HLL” configuration - Hinged, link lock latchRJRJ <strong>SE</strong>RIESHLLConstructionMaterialGasketStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsSoft Edge DesignRaised coverHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all external hardwareIntegral flange molded in place for ease of mountingPanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisExtended depth in coverRJ1008HLLNOTES:HLLIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixHLLBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 322Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326HLLModifications See Special ModRight Modification pg 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322177<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“RJ” Series “HLL” Configuration Technical DrawingsWBFHOLE DIA.4 PLC'S.CRJ <strong>SE</strong>RIESNAAOAEHBMP<strong>SE</strong>CTION B-BLBack Panel Available(see page 329)JDBK<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVER“RJ” Series <strong>Enclosures</strong> - “HLL” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M N O PHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERRJ604HLL 7.50 x 5.47 x 6.22 5.84 x 3.85 x 5.95 6.75 x 2 5.49 4.25 2.25 0.25 7.45 5.31 3.34 0.31 2.5 lbs. BP-64(191 x 139 x 158) (148 x 98 x 151) (171 x 51) (140) (108) (57) (6) (189) (135) (85) (8)RJ606HLL 7.50 x 7.52 x 6.22 5.72 x 5.72 x 5.95 6.75 x 4 5.49 4.25 4.25 0.25 7.52 5.34 5.31 0.31 2.75 lbs. BP-66(191 x 191 x 158) (145 x 145 x 151) (171 x 101) (140) (108) (108) (6) (191) (136) (135) (8)RJ806HLL 9.62 x 7.46 x 6.22 7.73 x 5.74 x 5.95 8.88 x 4 5.49 6.25 4.25 0.25 9.36 7.25 5.28 0.31 3.5 lbs. BP-86(244 x 190 x158) (196 x 146 x 151) (225 x 101) (140) (159) (108) (6) (238) (185) (134) (8)RJ808HLL 9.56 x 9.38 x 6.26 7.73 x 7.73 x 6.01 8.75 x 6.00 5.43 6.25 6.25 0.25 9.37 7.17 7.17 0.31 1.84 lbs. BP-88(243 x 238 x 159) (196 x 196 x 153) (222 x 152) (138) (159) (159) (6) (238) (182) (182) (8)RJ1008HLL 11.62 x 9.37 x 6.61 9.73 x 7.73 x 6.36 10.75 x 6 5.91 8.25 6.25 0.25 11.38 9.3 7.38 0.31 5 lbs. BP-108(295 x 238 x 168) (247 x 196 x 162) (273 x 152) (150) (209) (159) (6) (289) (236) (188) (8)RJ1210HLL 13.56 x 11.43 x 6.61 11.79 x 9.80 x 6.32 12.75 x 8 5.87 10.25 8.25 0.25 13.41 11.2 9.23 0.31 6.5 lbs. BP-1210(344 x 291 x 168) (299 x 249 x 161) (324 x 203) (149) (260) (209) (6) (341) (284) (234) (8)RJ1212HLL 13.56 x 13.38 x 7.73 11.70 x 11.70 x 7.48 12.75 x 10.00 6.90 10.25 10.25 0.25 13.38 11.17 11.17 0.31 3.34 lbs. BP-1212(344 x 340 x 196) (297 x 297 x 190) (324 x 254) (175) (260) (260) (6) (340) (284) (284) (8)RJ1412HLL 15.50 x 13.38 x 7.69 13.53 x 11.55 x 7.45 14.62 x 10 6.87 12.25 10.25 0.25 15.42 13.2 11.16 0.31 8.5 lbs. BP-1412(394 x 340 x 195) (344 x 293 x 189) (371 x 254) (174) (311) (260) (6) (392) (335) (284) (8)RJ1614HLL 17.53 x 15.43 x 7.71 15.63 x 13.60 x 7.45 16.75 x 12 6.87 14.25 12.25 0.25 17.43 15.2 13.24 0.31 11.5 lbs. BP-1614(445 x 392 x 196) (397 x 345 x 189) (425 x 305) (174) (362) (311) (6) (443) (386) (336) (8)RJ1816HLL 19.62 x 17.48 x 10.62 17.69 x 15.69 x 10.31 18.88 x 12 9.86 16.25 14.25 0.25 19.49 17.25 15.25 0.31 19.25 lbs. BP-1816(498 x 444 x 270) (449 x 399 x 262) (479 x 305) (250) (413) (362) (6) (495) (438) (387) (8)RJ2016HLL 22.00 x 17.56 x 10.64 19.72 x 15.72 x 10.33 21.25 x 10.00 9.87 18.25 14.25 0.25 21.56 19.31 15.39 0.31 20.25 lbs. BPJ2016(559 x 446 x 270) (501 x 399 x 262) (540 x 254) (251) (464) (362) (6) (548) (490) (391) (8)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com178
Technical Specifications - “RJ” SeriesHPL“HPL” configuration - Hinged, padlock latchRJRJ <strong>SE</strong>RIESHPLConstructionMaterialGasketStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsSoft Edge DesignRaised coverHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all external hardwareIntegral flange molded in place for ease of mountingPanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisExtended depth in coverRJ1008HPLNOTES:HPLIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixHPLBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 322Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326HPLModifications See Special ModRight Modification pg 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322179<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“RJ” Series “HPL” Configuration Technical DrawingsWBFHOLE DIA.4 PLC'S.CRJ <strong>SE</strong>RIESNAAOAEHBMP<strong>SE</strong>CTION B-BLBack Panel Available(see page 329)JDBK<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVER“RJ” Series <strong>Enclosures</strong> - “HPL” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M N O PHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERRJ604HPL 7.50 x 5.47 x 6.22 5.84 x 3.85 x 5.95 6.75 x 2 5.49 4.25 2.25 0.25 7.45 5.31 3.34 0.31 2.5 lbs. BP-64(191 x 139 x 158) (148 x 98 x 151) (171 x 51) (140) (108) (57) (6) (189) (135) (85) (8)RJ606HPL 7.50 x 7.52 x 6.22 5.72 x 5.72 x 5.95 6.75 x 4 5.49 4.25 4.25 0.25 7.52 5.34 5.31 0.31 2.75 lbs. BP-66(191 x 191 x 158) (145 x 145 x 151) (171 x 101) (140) (108) (108) (6) (191) (136) (135) (8)RJ806HPL 9.62 x 7.46 x 6.22 7.73 x 5.74 x 5.95 8.88 x 4 5.49 6.25 4.25 0.25 9.36 7.25 5.28 0.31 3.5 lbs. BP-86(244 x 190 x158) (196 x 146 x 151) (225 x 101) (140) (159) (108) (6) (238) (185) (134) (8)RJ808HPL 9.56 x 9.38 x 6.26 7.73 x 7.73 x 6.01 8.75 x 6.00 5.43 6.25 6.25 0.25 9.37 7.17 7.17 0.31 1.84 lbs. BP-88(243 x 238 x 159) (196 x 196 x 153) (222 x 152) (138) (159) (159) (6) (238) (182) (182) (8)RJ1008HPL 11.62 x 9.37 x 6.61 9.73 x 7.73 x 6.36 10.75 x 6 5.91 8.25 6.25 0.25 11.38 9.3 7.38 0.31 5 lbs. BP-108(295 x 238 x 168) (247 x 196 x 162) (273 x 152) (150) (209) (159) (6) (289) (236) (188) (8)RJ1210HPL 13.56 x 11.43 x 6.61 11.79 x 9.80 x 6.32 12.75 x 8 5.87 10.25 8.25 0.25 13.41 11.2 9.23 0.31 6.5 lbs. BP-1210(344 x 291 x 168) (299 x 249 x 161) (324 x 203) (149) (260) (209) (6) (341) (284) (234) (8)RJ1212HPL 13.56 x 13.38 x 7.73 11.70 x 11.70 x 7.48 12.75 x 10.00 6.90 10.25 10.25 0.25 13.38 11.17 11.17 0.31 3.34 lbs. BP-1212(344 x 340 x 196) (297 x 297 x 190) (324 x 254) (175) (260) (260) (6) (340) (284) (284) (8)RJ1412HPL 15.50 x 13.38 x 7.69 13.53 x 11.55 x 7.45 14.62 x 10 6.87 12.25 10.25 0.25 15.42 13.2 11.16 0.31 8.5 lbs. BP-1412(394 x 340 x 195) (344 x 293 x 189) (371 x 254) (174) (311) (260) (6) (392) (335) (284) (8)RJ1614HPL 17.53 x 15.43 x 7.71 15.63 x 13.60 x 7.45 16.75 x 12 6.87 14.25 12.25 0.25 17.43 15.2 13.24 0.31 11.5 lbs. BP-1614(445 x 392 x 196) (397 x 345 x 189) (425 x 305) (174) (362) (311) (6) (443) (386) (336) (8)RJ1816HPL 19.62 x 17.48 x 10.62 17.69 x 15.69 x 10.31 18.88 x 12 9.86 16.25 14.25 0.25 19.49 17.25 15.25 0.31 19.25 lbs. BP-1816(498 x 444 x 270) (449 x 399 x 262) (479 x 305) (250) (413) (362) (6) (495) (438) (387) (8)RJ2016HPL 22.00 x 17.56 x 10.64 19.72 x 15.72 x 10.33 21.25 x 10.00 9.87 18.25 14.25 0.25 21.56 19.31 15.39 0.31 20.25 lbs. BPJ2016(559 x 446 x 270) (501 x 399 x 262) (540 x 254) (251) (464) (362) (6) (548) (490) (391) (8)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com180
Technical Specifications - “RJ” Series“FHW” configuration - Fiberglass hinged, 4 cover screwRJRJ <strong>SE</strong>RIESFHWConstructionMaterialGasketPanhead screws<strong>Non</strong> metallic hingeStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsSoft Edge DesignRaised coverHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental sealMinimizes protruding surfacesCorrosive resistant, removable hinge<strong>300</strong> Series stainless used on all external hardwareIntegral flange molded in place for ease of mountingPanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisExtended depth in coverRJ1008FHWNOTES:FHWFHWBack PanelsIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 12NEMA 250 Type 1, 3, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 322Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326FHWModifications See Special ModRight Modification pg 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322181<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“RJ” Series “FHW” Configuration Technical DrawingsWBFHOLE DIA.4 PLC'S.CRJ <strong>SE</strong>RIESNAAOAEHBMP<strong>SE</strong>CTION B-BLBack Panel Available(see page 329)JDBK<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVER“RJ” Series <strong>Enclosures</strong> - “FHW” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M N O PHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERRJ806FHW 9.62 x 7.46 x 6.22 7.73 x 5.74 x 5.95 8.88 x 4 5.49 6.25 4.25 0.25 9.36 7.25 5.28 0.31 3.5 lbs. BP-86(244 x 190 x158) (196 x 146 x 151) (225 x 101) (140) (159) (108) (6) (238) (185) (134) (8)RJ808FHW 9.56 x 9.38 x 6.26 7.73 x 7.73 x 6.01 8.75 x 6.00 5.43 6.25 6.25 0.25 9.37 7.17 7.17 0.31 1.84 lbs. BP-88(243 x 238 x 159) (196 x 196 x 153) (222 x 152) (138) (159) (159) (6) (238) (182) (182) (8)RJ1008FHW 11.62 x 9.37 x 6.61 9.73 x 7.73 x 6.36 10.75 x 6 5.91 8.25 6.25 0.25 11.38 9.3 7.38 0.31 5 lbs. BP-108(295 x 238 x 168) (247 x 196 x 162) (273 x 152) (150) (209) (159) (6) (289) (236) (188) (8)RJ1210FHW 13.56 x 11.43 x 6.61 11.79 x 9.80 x 6.32 12.75 x 8 5.87 10.25 8.25 0.25 13.41 11.2 9.23 0.31 6.5 lbs. BP-1210(344 x 291 x 168) (299 x 249 x 161) (324 x 203) (149) (260) (209) (6) (341) (284) (234) (8)RJ1212FHW 13.56 x 13.38 x 7.73 11.70 x 11.70 x 7.48 12.75 x 10.00 6.90 10.25 10.25 0.25 13.38 11.17 11.17 0.31 3.34 lbs. BP-1212(344 x 340 x 196) (297 x 297 x 190) (324 x 254) (175) (260) (260) (6) (340) (284) (284) (8)RJ1412FHW 15.50 x 13.38 x 7.69 13.53 x 11.55 x 7.45 14.62 x 10 6.87 12.25 10.25 0.25 15.42 13.2 11.16 0.31 8.5 lbs. BP-1412(394 x 340 x 195) (344 x 293 x 189) (371 x 254) (174) (311) (260) (6) (392) (335) (284) (8)RJ1614FHW 17.53 x 15.43 x 7.71 15.63 x 13.60 x 7.45 16.75 x 12 6.87 14.25 12.25 0.25 17.43 15.2 13.24 0.31 11.5 lbs. BP-1614(445 x 392 x 196) (397 x 345 x 189) (425 x 305) (174) (362) (311) (6) (443) (386) (336) (8)RJ1816FHW 19.62 x 17.48 x 10.62 17.69 x 15.69 x 10.31 18.88 x 12 9.86 16.25 14.25 0.25 19.49 17.25 15.25 0.31 19.25 lbs. BP-1816(498 x 444 x 270) (449 x 399 x 262) (479 x 305) (250) (413) (362) (6) (495) (438) (387) (8)RJ2016FHW 22.00 x 17.56 x 10.64 19.72 x 15.72 x 10.33 21.25 x 10.00 9.87 18.25 14.25 0.25 21.56 19.31 15.39 0.31 20.25 lbs. BPJ2016(559 x 446 x 270) (501 x 399 x 262) (540 x 254) (251) (464) (362) (6) (548) (490) (391) (8)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com182
Technical Specifications - “RJ” SeriesFHLL“FHLL” configuration - Fiberglass hinged, link lock latchRJRJ <strong>SE</strong>RIESFHLLConstructionMaterialGasketStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsSoft Edge DesignRaised coverHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all external hardwareIntegral flange molded in place for ease of mountingPanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisExtended depth in coverRJ1008FHLLNOTES:FHLL Industry StandardsUL/cUL 50Not ListedNEMA 250 1, 3, 12CSA Std C22.2Not ListedTemperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixFHLLBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 322Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326FHLLModifications See Special ModRight Modification pg 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322183<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“RJ” Series “FHLL” Configuration Technical DrawingsWBFHOLE DIA.4 PLC'S.RJ <strong>SE</strong>RIESCNAAOAEHBMP<strong>SE</strong>CTION B-BLBack Panel Available(see page 329)JDBK<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVER“RJ” Series <strong>Enclosures</strong> - “FHLL” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M N O PHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERRJ806FHLL 9.62 x 7.46 x 6.22 7.73 x 5.74 x 5.95 8.88 x 4 5.49 6.25 4.25 0.25 9.36 7.25 5.28 0.31 3.5 lbs. BP-86(244 x 190 x158) (196 x 146 x 151) (225 x 101) (140) (159) (108) (6) (238) (185) (134) (8)RJ808FHLL 9.56 x 9.38 x 6.26 7.73 x 7.73 x 6.01 8.75 x 6.00 5.43 6.25 6.25 0.25 9.37 7.17 7.17 0.31 1.84 lbs. BP-88(243 x 238 x 159) (196 x 196 x 153) (222 x 152) (138) (159) (159) (6) (238) (182) (182) (8)RJ1008FHLL 11.62 x 9.37 x 6.61 9.73 x 7.73 x 6.36 10.75 x 6 5.91 8.25 6.25 0.25 11.38 9.3 7.38 0.31 5 lbs. BP-108(295 x 238 x 168) (247 x 196 x 162) (273 x 152) (150) (209) (159) (6) (289) (236) (188) (8)RJ1210FHLL 13.56 x 11.43 x 6.61 11.79 x 9.80 x 6.32 12.75 x 8 5.87 10.25 8.25 0.25 13.41 11.2 9.23 0.31 6.5 lbs. BP-1210(344 x 291 x 168) (299 x 249 x 161) (324 x 203) (149) (260) (209) (6) (341) (284) (234) (8)RJ1212FHW 13.56 x 13.38 x 7.73 11.70 x 11.70 x 7.48 12.75 x 10.00 6.90 10.25 10.25 0.25 13.38 11.17 11.17 0.31 3.34 lbs. BP-1212(344 x 340 x 196) (297 x 297 x 190) (324 x 254) (175) (260) (260) (6) (340) (284) (284) (8)RJ1412FHLL 15.50 x 13.38 x 7.69 13.53 x 11.55 x 7.45 14.62 x 10 6.87 12.25 10.25 0.25 15.42 13.2 11.16 0.31 8.5 lbs. BP-1412(394 x 340 x 195) (344 x 293 x 189) (371 x 254) (174) (311) (260) (6) (392) (335) (284) (8)RJ1614FHLL 17.53 x 15.43 x 7.71 15.63 x 13.60 x 7.45 16.75 x 12 6.87 14.25 12.25 0.25 17.43 15.2 13.24 0.31 11.5 lbs. BP-1614(445 x 392 x 196) (397 x 345 x 189) (425 x 305) (174) (362) (311) (6) (443) (386) (336) (8)RJ1816FHLL 19.62 x 17.48 x 10.62 17.69 x 15.69 x 10.31 18.88 x 12 9.86 16.25 14.25 0.25 19.49 17.25 15.25 0.31 19.25 lbs. BP-1816(498 x 444 x 270) (449 x 399 x 262) (479 x 305) (250) (413) (362) (6) (495) (438) (387) (8)RJ2016FHLL 22.00 x 17.56 x 10.64 19.72 x 15.72 x 10.33 21.25 x 10.00 9.87 18.25 14.25 0.25 21.56 19.31 15.39 0.31 20.25 lbs. BPJ2016(559 x 446 x 270) (501 x 399 x 262) (540 x 254) (251) (464) (362) (6) (548) (490) (391) (8)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com184
Technical Specifications - “RJ” SeriesFHPL“FHPL” configuration - Fiberglass hinged, padlock latchRJRJ <strong>SE</strong>RIESFHPLConstructionMaterialGasketStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsSoft Edge DesignRaised coverHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all external hardwareIntegral flange molded in place for ease of mountingPanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisExtended depth in coverRJ1210FHPLNOTES:FHPL Industry StandardsUL/cUL 50Not ListedNEMA 250 Type 1, 3, 12CSA Std C22.2Not ListedTemperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixFHPLBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 322Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326FHPLModifications See Special ModRight Modification pg 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322185<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“RJ” Series “FHPL” Configuration Technical DrawingsWBFHOLE DIA.4 PLC'S.RJ <strong>SE</strong>RIESCNAAOAEHBMP<strong>SE</strong>CTION B-BLBack Panel Available(see page 329)JDBK<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVER“RJ” Series <strong>Enclosures</strong> - “FHPL” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M N O PHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERRJ806FHPL 9.62 x 7.46 x 6.22 7.73 x 5.74 x 5.95 8.88 x 4 5.49 6.25 4.25 0.25 9.36 7.25 5.28 0.31 3.5 lbs. BP-86(244 x 190 x158) (196 x 146 x 151) (225 x 101) (140) (159) (108) (6) (238) (185) (134) (8)RJ808FHPL 9.56 x 9.38 x 6.26 7.73 x 7.73 x 6.01 8.75 x 6.00 5.43 6.25 6.25 0.25 9.37 7.17 7.17 0.31 1.84 lbs. BP-88(243 x 238 x 159) (196 x 196 x 153) (222 x 152) (138) (159) (159) (6) (238) (182) (182) (8)RJ1008FHPL 11.62 x 9.37 x 6.61 9.73 x 7.73 x 6.36 10.75 x 6 5.91 8.25 6.25 0.25 11.38 9.3 7.38 0.31 5 lbs. BP-108(295 x 238 x 168) (247 x 196 x 162) (273 x 152) (150) (209) (159) (6) (289) (236) (188) (8)RJ1210FHPL 13.56 x 11.43 x 6.61 11.79 x 9.80 x 6.32 12.75 x 8 5.87 10.25 8.25 0.25 13.41 11.2 9.23 0.31 6.5 lbs. BP-1210(344 x 291 x 168) (299 x 249 x 161) (324 x 203) (149) (260) (209) (6) (341) (284) (234) (8)RJ1212FHPL 13.56 x 13.38 x 7.73 11.70 x 11.70 x 7.48 12.75 x 10.00 6.90 10.25 10.25 0.25 13.38 11.17 11.17 0.31 3.34 lbs. BP-1212(344 x 340 x 196) (297 x 297 x 190) (324 x 254) (175) (260) (260) (6) (340) (284) (284) (8)RJ 1412FHPL 15.50 x 13.38 x 7.69 13.53 x 11.55 x 7.45 14.62 x 10 6.87 12.25 10.25 0.25 15.42 13.2 11.16 0.31 8.5 lbs. BP-1412(394 x 340 x 195) (344 x 293 x 189) (371 x 254) (174) (311) (260) (6) (392) (335) (284) (8)RJ 1614FHPL 17.53 x 15.43 x 7.71 15.63 x 13.60 x 7.45 16.75 x 12 6.87 14.25 12.25 0.25 17.43 15.2 13.24 0.31 11.5 lbs. BP-1614(445 x 392 x 196) (397 x 345 x 189) (425 x 305) (174) (362) (311) (6) (443) (386) (336) (8)RJ 1816FHPL 19.62 x 17.48 x 10.62 17.69 x 15.69 x 10.31 18.88 x 12 9.86 16.25 14.25 0.25 19.49 17.25 15.25 0.31 19.25 lbs. BP-1816(498 x 444 x 270) (449 x 399 x 262) (479 x 305) (250) (413) (362) (6) (495) (438) (387) (8)RJ 2016FHPL 22.00 x 17.56 x 10.64 19.72 x 15.72 x 10.33 21.25 x 10.00 9.87 18.25 14.25 0.25 21.56 19.31 15.39 0.31 20.25 lbs. BPJ2016(559 x 446 x 270) (501 x 399 x 262) (540 x 254) (251) (464) (362) (6) (548) (490) (391) (8)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com186
The “RJW” Series RJWThe “RJW” SeriesRJW <strong>SE</strong>RIESThe “RJW” Series enclosures adds a maximum sized flush mounted window to the standard raised cover fiberglassenclosure. The variation refers to a “raised” cover that does not affect the height of the base. Unobstructed side-walls, built inmounting capabilities and depth of cover offer a full range of possibilities when working with this enclosure.<strong>Stahlin</strong>'s “RJW” series enclosures are designed for general electrical and electronic applications and any application that hasassociated environmental concerns. The full size window offers an unobstructed view to elevated panels and internaldevices. The combination of the extended depth cover and bonded window make it possible to mount an elevated pushbuttonthat has clearance room to spare.“RJW” series windows are uniquely routed for a precision flush fit.The enclosure maintains its watertight (4x) rating as well as itsIntegral Mounting Flangesubmersible rating (6P) due to this unique construction.Offering ample space, easy access, high visibility andSeamless PolyurethaneDoor Gasketenvironmental protection, this enclosure series has it all.Series Featured Highlights“RJW” “RJW” Series AttributesRaised Cover For● Overhang cover on smooth sided baseAdditional Depth● Full size flush mounted window of scratchresistant acrylicSolid Construction● All stainless hardware latches and screwsCompression MoldedFiberglass Reinforced● Full length stainless steel hingePolyester● Chemically resistant fiberglass reinforced polyesterIndustrial Tough● Submersible, non corrosive, environmentaldesigns● Maintains both watertight and submersible ratingsFlush Mounted Windowwith installed window● Exclusive stainless steel retention chain on screw coversEconomical“RJW” Series SpecificationsLatch Mechanism• Padlock Latch• Link Lock Latch●Water tight●Fire resistant●UL/cUL approved●Submersible●Light weight●CSA approved●Corrosion Resistant● Rated NEMA 1, 3, 4X, 6P, 12LISTEDLISTEDThe “RJW” Series is Applicable for Many Industries including:OEM &Instrumentation DesignsPump Control SystemsPulp & PaperProcessing ControlsSCADA Systems
RJW <strong>SE</strong>RIESThe “RJW” Series● Eleven basic sizes● Four basic concepts● Seven configurations(W, HW, HLL, HPL, FHW, FHLL, FHPL)
The “RJW” SeriesRJWRJW <strong>SE</strong>RIESThe “RJW” Series Family consistsof four basic concepts:screw down cover, hingedcover with screw down, atwist lock latch and apadlock latch. There areeleven basic sizes in therange. Simple screwdown cover styleenclosures employ anindustry exclusivestainless steelretention chain. A fullsize bonded windowprovides maximumvisibility of internalcomponents while maintaining the fullenvironmental integrity of the enclosure.“RJW” Series Ordering InformationUse the information below to derive specific catalog numbers. <strong>Stahlin</strong>catalog numbers first begin with Family ID, then size ID and configurationID as a suffix. See the example below.Ordering Information - Deriving <strong>Catalog</strong> NumbersFamily ID Size ID Configuration ID EXAMPLERJW XXXX Conf. ID = “RJW604W”“RJW” Series - Inside DimensionsSize ID H x W x D Optional Panel #RJW604 5.84 x 3.85 x 5.95 BP64RJW606 5.72 x 5.72 x 5.95 BP66RJW806 7.73 x 5.74 x 5.95 BP86RJW808 7.73 x 7.73 x 5.89 BP88RJW1008 9.73 x 7.73 x 6.36 BP108RJW1210 11.79 x 9.80 x 6.32 BP1210RJW1212 11.70 x 11.70 x 7.36 BP1212RJW1412 13.53 x 11.55 x 7.45 BP1412RJW1614 15.63 x 13.60 x 7.45 BP1614RJW1816 17.69 x 15.69 x 10.31 BP1816RJW2016 19.72 x 15.72 x 10.21 BPJ2016Optional back panels available in various materials. See page 329“RJW” Series - ConfigurationsConfigurationIDDESCRIPTIONW4 cover screws, flush bonded window, lift off cover configurationHWHinged, flush bonded window, 2 cover screws configurationHLLHinged, flush bonded window, link lock latch configurationHPLHinged, flush bonded window, padlock latch configurationFHWFiberglass hinged, flush bonded window, 4 cover screws config.FHLLFiberglass hinged, flush bonded window, link lock latch config.FHPL Fiberglass hinged, flush bonded window, padlock latch config.“RJW” Series Shared CharacteristicsConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareCover depthMolded in Mounting FlangeMounting BossesMetal insertsBonded WindowPhysical Characteristics<strong>Non</strong> corrosiveWater-tightDust-tightImpact resistant<strong>Non</strong> ConductiveLight weightUV resistantWorkable materialEasy maintenancePleasing aestheticsColor/FinishIndustry StandardsHot compression molded fiberglassreinforced polyesterPoured polyurethane seamlessgasket provides watertight, dust-tightenvironmental sealNo protruding surfaces<strong>300</strong> Series stainless used on allexternal hardwareExtra depth molded into coverIntegral flange molded in place forease of mountingPanel mounting capability for fixedrear panelAll bosses utilize threaded brass insertsaccepting 10-32 screwsFlush mounted window uses a scratch& abrasion resistant acrylicStands up to an exceptionally broadrange of chemical exposuresRated watertight and submersible for aprolonged periodResults in an environmentally sealed,environmentally sound spaceResilient material with high impactresistanceDouble insulated material. No incidentalelectrical contactSolid construction in a lightweightdesignMinimizes the affects of sunlightCuts, drills, punches, and saws withease and accuracyScratches and gouges can be restoredwith a petroleum jelly productSmooth lines, soft colors easily blendinto customer’s design conceptsSmooth surface, no color variations,swirls, or color pockets, no voids.Color described as Glacier GrayUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA Type 1, 3, 4X, 6P, 12CSA Std 22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow flammability UL94V-0Self extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed inappendix189<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“RJW” Series Configurationscontinued on following pagesW4 cover screws, flush mounted window, lift off coverDesign Features● Lift off cover design● Scratch and abrasion resistant UVA acrylic flushbonded window● Pan head stainless steel screws● Integral mounting flange● Extended depth in cover● Maintains both watertight and submersible ratingswith installed window● Stainless steel beaded cover retention chainRJW1008WRJW <strong>SE</strong>RIESHWHinged, flush mounted window, 2 cover screwsDesign Features● Full length stainless steel hinged cover● Scratch and abrasion resistant UVA acrylic flushbonded window● Pan head stainless steel screws● Maintains both watertight and submersible ratingswith installed window● Full 180°+ door opening● Extended depth coverRJW1210HWHLLHinged, flush mounted window, link lock latchDesign Features● Scratch and abrasion resistant UVA acrylicflush bonded window● Link lock latch for quick entry● Latch lies flat on side of enclosure● Can be lifted and turned with ease● Full 180°+ door opening● Maintains both watertight and submersible ratingswith installed windowRJW1008HLL<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com190
“RJW” Series ConfigurationsHPLHinged, flush bonded window, padlock latchRJW <strong>SE</strong>RIESDesign Features●●●●●●●Scratch and abrasion resistant UVA acrylic flush bonded windowPadlock latch for quick entrySnap catch concept with toggle actionIntegral hasp provides secure loop for padlock (padlock not included)Can be lifted and released with easeFull 180°+ door openingMaintains both watertight and submersible ratingswith installed windowRJW1008HPLFHWFiberglass hinged, flush bonded window, four cover screwsDesign Features● Fiberglass hinge provides maximum corrosion resistance● Scratch and abrasion resistant UVA acrylic flush bonded window● Pan head stainless steel screws maintain low profile on cover● Four cover screws configuration secures cover● Full 180°+ door openingRJW1210FHWFHLLFiberglass hinged, flush bonded window, link lock latchDesign Features●●●●●●Fiberglass hinge for maximum corrosion resistanceRemovable lift off cover capabilityScratch and abrasion resistant UVA acrylic flushbonded windowLink lock latch mechanism for easy entryFull 180°+ door openingExtended depth coverRJW1008FHLL191<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“RJW” Series ConfigurationsFHPLFiberglass hinged, flush bonded window, padlock latchDesign Features●●●●●●Fiberglass hinge for maximum corrosion resistanceRemovable lift off cover capabilityScratch and abrasion resistant UVA acrylic flushbonded windowPadlock latch for quick entry and security capabilitiesExtended depth coverFull 180°+ door openingRJW <strong>SE</strong>RIESRJW1210FHPLRaised Cover Junction EnclosureCBB<strong>SE</strong>CTION B-BAFLUSHMOUNTWINDOWACABRaised Cover Dimensions<strong>Catalog</strong>Window AreaNumber CA CB CC (Maximum)RJW604 5.31 3.34 5.39 4.25 x 2.25(135) (85) (137) (108 x 57)RJW606 5.34 5.31 5.39 4.25 x 4.25(136) (135) (137) (108 x 108)RJW806 7.27 5.28 5.38 6.25 x 4.25(185) (134) (137) (159 x 108)RJW808 7.27 7.27 5.38 6.25 x 4.25(185) (185) (137) (159 x 108)RJW1008 9.29 7.38 5.78 8.25 x 6.25(236) (188) (147) (210 x 159)RJW1210 11.2 9.23 5.73 10.25 x 8.25(284) (234) (146) (260 x 210)RJW1212 11.2 9.23 5.73 10.25 x 8.25(284) (234) (146) (260 x 210)RJW 1412 13.2 11.16 6.74 12.25 x 10.25(335) (284) (171) (311 x 260)RJW 1614 15.2 13.23 6.74 14.25 x 12.25(386) (336) (171) (362 x 311)RJW 1816* 17.25 15.25 9.73 16.25 x 14.25(438) (387) (247) (413 x 362)RJW 2016* 19.34 15.41 9.76 18.25 x 14.25(490) (391) (248) (463 x 362)CCCaution: Metric units are for reference;do not convert.All measures are in inches, items in parentheses are in millimeters.*STD part is not 6P rated, to maintain 6p rating window up to 141/4 x 121/4.<strong>SE</strong>CTION A-A<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com192
WTechnical Specifications - “RJW” Series“W” configuration - 4 cover screws, flush bonded window, lift off coverRJWRJW <strong>SE</strong>RIESWConstructionMaterialGasketPan head screwsStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsBonded windowCover retention chainHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental sealMinimizes protruding surfaces<strong>300</strong> Series stainless used on all external hardwareIntegral flange molded in place for ease of mountingPanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsPrecision routed flush bonded window for maximum visibilityStainless steel beaded chain for securing cover after lift offNOTES:RJW1008WWWIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 322Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326WModifications See Special ModRight Modification pg 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322193<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“RJW” Series “W” Configuration Technical DrawingsWBFHOLE DIA.4 PLC'S.CRJW <strong>SE</strong>RIESNAAOAEHBMP<strong>SE</strong>CTION B-BLBack Panel Available(See Accessories)JDBK<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVER“RJW” Series <strong>Enclosures</strong> - “W” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CWINDOWAREA [MAX.]MOUNTINGE X F J K L M N O PHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERRJW604W 7.50 x 5.47 x 6.22 5.84 x 3.85 x 5.95 4.25 x 2.25 6.75 x 2 5.49 4.25 2.25 0.25 7.45 5.31 3.34 0.31 2.5 lbs. BP-64(191 x 139 x 158) (148 x 98 x 151) (108 x 57) (171 x 51) (140) (108) (57) (6) (189) (135) (85) (8)RJW606W 7.50 x 7.52 x 6.22 5.72 x 5.72 x 5.95 4.25 x 4.25 6.75 x 4 5.49 4.25 4.25 0.25 7.52 5.34 5.31 0.31 2.75 lbs. BP-66(191 x 191 x 158) (145 x 145 x 151) (108 x 108) (171 x 101) (140) (108) (108) (6) (191) (136) (135) (8)RJW806W 9.62 x 7.46 x 6.22 7.73 x 5.74 x 5.95 6.25 x 4.25 8.88 x 4 5.49 6.25 4.25 0.25 9.36 7.25 5.28 0.31 3.5 lbs. BP-86(244 x 190 x158) (196 x 146 x 151) (159 x 108) (225 x 101) (140) (159) (108) (6) (238) (185) (134) (8)RJW808W 9.56 x 9.38 x 6.26 7.73 x 7.73 x 5.89 8.75 x 6.00 6.25 x 6.25 5.31 6.25 6.25 0.25 9.37 7.17 7.17 0.31 1.84 lbs. BP-88(243 x 238 x 159) (196 x 196 x 150) (222 x 152) (159 x 159) (135) (159) (159) (6) (238) (182) (182) (8)RJW1008W 11.62 x 9.37 x 6.61 9.73 x 7.73 x 6.36 8.25 x 6.25 10.75 x 6 5.91 8.25 6.25 0.25 11.38 9.3 7.38 0.31 5 lbs. BP-108(295 x 238 x 168) (247 x 196 x 162) (210 x 159) (273 x 152) (150) (209) (159) (6) (289) (236) (188) (8)RJW1210W 13.56 x 11.43 x 6.61 11.79 x 9.80 x 6.32 10.25 x 8.25 12.75 x 8 5.87 10.25 8.25 0.25 13.41 11.2 9.23 0.31 6.5 lbs. BP-1210(344 x 291 x 168) (299 x 249 x 161) (260 x 210) (324 x 203) (149) (260) (209) (6) (341) (284) (234) (8)RJW1212W 13.56 x 13.38 x 7.73 11.70 x 11.70 x 7.36 12.75 x 10.00 10.25 x 10.25 6.78 10.25 10.25 0.25 13.38 11.17 11.17 0.31 3.34 lbs. BP-1212(344 x 340 x 196) (297 x 297 x 187) (324 x 254) (260 x 260) (172) (260) (260) (6) (340) (284) (284) (8)RJW1412W 15.50 x 13.38 x 7.69 13.53 x 11.55 x 7.45 12.25 x 10.25 14.62 x 10 6.87 12.25 10.25 0.25 15.42 13.2 11.16 0.31 8.5 lbs. BP-1412(394 x 340 x 195) (344 x 293 x 189) (311 x 260) (371 x 254) (174) (311) (260) (6) (392) (335) (284) (8)RJW1614W 17.53 x 15.43 x 7.71 15.63 x 13.60 x 7.45 14.25 x 12.25 16.75 x 12 6.87 14.25 12.25 0.25 17.43 15.2 13.24 0.31 11.5 lbs. BP-1614(445 x 392 x 196) (397 x 345 x 189) (362 x 311) (425 x 305) (174) (362) (311) (6) (443) (386) (336) (8)RJW1816W* 19.62 x 17.48 x 10.62 17.69 x 15.69 x 10.31 16.25 x 14.25 18.88 x 12 9.86 16.25 14.25 0.25 19.49 17.25 15.25 0.31 19.25 lbs. BP-1816(498 x 444 x 270) (449 x 399 x 262) (413 x 362) (479 x 305) (250) (413) (362) (6) (495) (438) (387) (8)RJW2016W* 22.00 x 17.56 x 10.64 19.72 x 15.72 x 10.33 18.25 x 14.25 21.25 x 10.00 9.87 18.25 14.25 0.25 21.56 19.31 15.39 0.31 20.25 lbs. BPJ2016(559 x 446 x 270) (501 x 399 x 262) (464 x 362) (540 x 254) (251) (464) (362) (6) (548) (490) (391) (8)All measures are in inches, items in parentheses are in millimeters.*1816, 2016 sizes not 6, 6P Rated<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com194
HWTechnical Specifications - “RJW” Series“HW” configuration - 4 cover screws, flush bonded window, lift off coverRJWRJW <strong>SE</strong>RIESHW ConstructionMaterialGasketPan head screwsStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsBonded windowRaised coverHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental sealMinimizes protruding surfaces<strong>300</strong> Series stainless used on all external hardwareIntegral flange molded in place for ease of mountingPanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsPrecision routed flush bonded window for maximum visibilityExtended depth in coverRJW1210HWNOTES:HWIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixHWBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 322Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326HWModifications See Special ModRight Modification pg 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322195<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“RJW” Series “HW” Configuration Technical DrawingsWBFHOLE DIA.4 PLC'S.CRJW <strong>SE</strong>RIESNAAOAEHBMP<strong>SE</strong>CTION B-BLBack Panel Available(See Accessories)JDBK<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVER“RJW” Series <strong>Enclosures</strong> - “HW” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CWINDOWAREA [MAX.]MOUNTINGE X F J K L M N O PHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERRJW604HW 7.50 x 5.47 x 6.22 5.84 x 3.85 x 5.95 4.25 x 2.25 6.75 x 2 5.49 4.25 2.25 0.25 7.45 5.31 3.34 0.31 2.5 lbs. BP-64(191 x 139 x 158) (148 x 98 x 151) (108 x 57) (171 x 51) (140) (108) (57) (6) (189) (135) (85) (8)RJW606HW 7.50 x 7.52 x 6.22 5.72 x 5.72 x 5.95 4.25 x 4.25 6.75 x 4 5.49 4.25 4.25 0.25 7.52 5.34 5.31 0.31 2.75 lbs. BP-66(191 x 191 x 158) (145 x 145 x 151) (108 x 108) (171 x 101) (140) (108) (108) (6) (191) (136) (135) (8)RJW806HW 9.62 x 7.46 x 6.22 7.73 x 5.74 x 5.95 6.25 x 4.25 8.88 x 4 5.49 6.25 4.25 0.25 9.36 7.25 5.28 0.31 3.5 lbs. BP-86(244 x 190 x158) (196 x 146 x 151) (159 x 108) (225 x 101) (140) (159) (108) (6) (238) (185) (134) (8)RJW808HW 9.56 x 9.38 x 6.26 7.73 x 7.73 x 5.89 8.75 x 6.00 6.25 x 6.25 5.31 6.25 6.25 0.25 9.37 7.17 7.17 0.31 1.84 lbs. BP-88(243 x 238 x 159) (196 x 196 x 150) (222 x 152) (159 x 159) (135) (159) (159) (6) (238) (182) (182) (8)RJW1008HW 11.62 x 9.37 x 6.61 9.73 x 7.73 x 6.36 8.25 x 6.25 10.75 x 6 5.91 8.25 6.25 0.25 11.38 9.3 7.38 0.31 5 lbs. BP-108(295 x 238 x 168) (247 x 196 x 162) (210 x 159) (273 x 152) (150) (209) (159) (6) (289) (236) (188) (8)RJW1210HW 13.56 x 11.43 x 6.61 11.79 x 9.80 x 6.32 10.25 x 8.25 12.75 x 8 5.87 10.25 8.25 0.25 13.41 11.2 9.23 0.31 6.5 lbs. BP-1210(344 x 291 x 168) (299 x 249 x 161) (260 x 210) (324 x 203) (149) (260) (209) (6) (341) (284) (234) (8)RJW1212HW 13.56 x 13.38 x 7.73 11.70 x 11.70 x 7.36 12.75 x 10.00 10.25 x 10.25 6.78 10.25 10.25 0.25 13.38 11.17 11.17 0.31 3.34 lbs. BP-1212(344 x 340 x 196) (297 x 297 x 187) (324 x 254) (260 x 260) (172) (260) (260) (6) (340) (284) (284) (8)RJW1412HW 15.50 x 13.38 x 7.69 13.53 x 11.55 x 7.45 12.25 x 10.25 14.62 x 10 6.87 12.25 10.25 0.25 15.42 13.2 11.16 0.31 8.5 lbs. BP-1412(394 x 340 x 195) (344 x 293 x 189) (311 x 260) (371 x 254) (174) (311) (260) (6) (392) (335) (284) (8)RJW1614HW 17.53 x 15.43 x 7.71 15.63 x 13.60 x 7.45 14.25 x 12.25 16.75 x 12 6.87 14.25 12.25 0.25 17.43 15.2 13.24 0.31 11.5 lbs. BP-1614(445 x 392 x 196) (397 x 345 x 189) (362 x 311) (425 x 305) (174) (362) (311) (6) (443) (386) (336) (8)RJW1816HW* 19.62 x 17.48 x 10.62 17.69 x 15.69 x 10.31 16.25 x 14.25 18.88 x 12 9.86 16.25 14.25 0.25 19.49 17.25 15.25 0.31 19.25 lbs. BP-1816(498 x 444 x 270) (449 x 399 x 262) (413 x 362) (479 x 305) (250) (413) (362) (6) (495) (438) (387) (8)RJW2016HW* 22.00 x 17.56 x 10.64 19.72 x 15.72 x 10.33 18.25 x 14.25 21.25 x 10.00 9.87 18.25 14.25 0.25 21.56 19.31 15.39 0.31 20.25 lbs. BPJ2016(559 x 446 x 270) (501 x 399 x 262) (464 x 362) (540 x 254) (251) (464) (362) (6) (548) (490) (391) (8)All measures are in inches, items in parentheses are in millimeters.*1816, 2016 sizes not 6, 6P Rated<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com196
Technical Specifications - “RJW” SeriesHLL“HLL” configuration - Hinged, flush bonded window, link lock latchRJWRJW <strong>SE</strong>RIESHLLConstructionMaterialGasketStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsBonded windowRaised CoverHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all external hardwareIntegral flange molded in place for ease of mountingPanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsPrecision routed flush bonded window for maximum visibilityExtended depth in coverRJW1008HLLNOTES:HLLHLLBack PanelsIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 322Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326HLLModifications See Special ModRight Modification pg 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322197<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“RJW” Series “HLL” Configuration Technical DrawingsWBFHOLE DIA.4 PLC'S.CRJW <strong>SE</strong>RIESNAAOAEHBMP<strong>SE</strong>CTION B-BLBack Panel Available(See Accessories)JDBK<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVER“RJW” Series <strong>Enclosures</strong> - “HLL” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CWINDOWAREA [MAX.]MOUNTINGE X F J K L M N O PHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERRJW604HLL 7.50 x 5.47 x 6.22 5.84 x 3.85 x 5.95 4.25 x 2.25 6.75 x 2 5.49 4.25 2.25 0.25 7.45 5.31 3.34 0.31 2.5 lbs. BP-64(191 x 139 x 158) (148 x 98 x 151) (108 x 57) (171 x 51) (140) (108) (57) (6) (189) (135) (85) (8)RJW606HLL 7.50 x 7.52 x 6.22 5.72 x 5.72 x 5.95 4.25 x 4.25 6.75 x 4 5.49 4.25 4.25 0.25 7.52 5.34 5.31 0.31 2.75 lbs. BP-66(191 x 191 x 158) (145 x 145 x 151) (108 x 108) (171 x 101) (140) (108) (108) (6) (191) (136) (135) (8)RJW806HLL 9.62 x 7.46 x 6.22 7.73 x 5.74 x 5.95 6.25 x 4.25 8.88 x 4 5.49 6.25 4.25 0.25 9.36 7.25 5.28 0.31 3.5 lbs. BP-86(244 x 190 x158) (196 x 146 x 151) (159 x 108) (225 x 101) (140) (159) (108) (6) (238) (185) (134) (8)RJW808HLL 9.56 x 9.38 x 6.26 7.73 x 7.73 x 5.89 8.75 x 6.00 6.25 x 6.25 5.31 6.25 6.25 0.25 9.37 7.17 7.17 0.31 1.84 lbs. BP-88(243 x 238 x 159) (196 x 196 x 150) (222 x 152) (159 x 159) (135) (159) (159) (6) (238) (182) (182) (8)RJW1008HLL 11.62 x 9.37 x 6.61 9.73 x 7.73 x 6.36 8.25 x 6.25 10.75 x 6 5.91 8.25 6.25 0.25 11.38 9.3 7.38 0.31 5 lbs. BP-108(295 x 238 x 168) (247 x 196 x 162) (210 x 159) (273 x 152) (150) (209) (159) (6) (289) (236) (188) (8)RJW1210HLL 13.56 x 11.43 x 6.61 11.79 x 9.80 x 6.32 10.25 x 8.25 12.75 x 8 5.87 10.25 8.25 0.25 13.41 11.2 9.23 0.31 6.5 lbs. BP-1210(344 x 291 x 168) (299 x 249 x 161) (260 x 210) (324 x 203) (149) (260) (209) (6) (341) (284) (234) (8)RJW1212HLL 13.56 x 13.38 x 7.73 11.70 x 11.70 x 7.36 12.75 x 10.00 10.25 x 10.25 6.78 10.25 10.25 0.25 13.38 11.17 11.17 0.31 3.34 lbs. BP-1212(344 x 340 x 196) (297 x 297 x 187) (324 x 254) (260 x 260) (172) (260) (260) (6) (340) (284) (284) (8)RJW1412HLL 15.50 x 13.38 x 7.69 13.53 x 11.55 x 7.45 12.25 x 10.25 14.62 x 10 6.87 12.25 10.25 0.25 15.42 13.2 11.16 0.31 8.5 lbs. BP-1412(394 x 340 x 195) (344 x 293 x 189) (311 x 260) (371 x 254) (174) (311) (260) (6) (392) (335) (284) (8)RJW1614HLL 17.53 x 15.43 x 7.71 15.63 x 13.60 x 7.45 14.25 x 12.25 16.75 x 12 6.87 14.25 12.25 0.25 17.43 15.2 13.24 0.31 11.5 lbs. BP-1614(445 x 392 x 196) (397 x 345 x 189) (362 x 311) (425 x 305) (174) (362) (311) (6) (443) (386) (336) (8)RJW1816HLL* 19.62 x 17.48 x 10.62 17.69 x 15.69 x 10.31 16.25 x 14.25 18.88 x 12 9.86 16.25 14.25 0.25 19.49 17.25 15.25 0.31 19.25 lbs. BP-1816(498 x 444 x 270) (449 x 399 x 262) (413 x 362) (479 x 305) (250) (413) (362) (6) (495) (438) (387) (8)RJW2016HLL* 22.00 x 17.56 x 10.64 19.72 x 15.72 x 10.33 18.25 x 14.25 21.25 x 10.00 9.87 18.25 14.25 0.25 21.56 19.31 15.39 0.31 20.25 lbs. BPJ2016(559 x 446 x 270) (501 x 399 x 262) (464 x 362) (540 x 254) (251) (464) (362) (6) (548) (490) (391) (8)All measures are in inches, items in parentheses are in millimeters.*1816, 2016 sizes not 6, 6P Rated<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com198
Technical Specifications - “RJW” SeriesHPL“HPL” configuration - Hinged, flush bonded window, padlock latchRJWRJW <strong>SE</strong>RIESHPLConstructionMaterialGasketStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsBonded windowRaised CoverHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all external hardwareIntegral flange molded in place for ease of mountingPanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsPrecision routed flush bonded window for maximum visibilityExtended depth in coverRJW1008HPLNOTES:HPLIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixHPLBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 322Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326HPLModifications See Special ModRight Modification pg 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322199<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“RJW” Series “HPL” Configuration Technical DrawingsWBFHOLE DIA.4 PLC'S.CRJW <strong>SE</strong>RIESNAAOAEHBMP<strong>SE</strong>CTION B-BLBack Panel Available(See Accessories)JDBK<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVER“RJW” Series <strong>Enclosures</strong> - “HPL” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CWINDOWAREA [MAX.]MOUNTINGE X F J K L M N O PHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERRJW604HPL 7.50 x 5.47 x 6.22 5.84 x 3.85 x 5.95 4.25 x 2.25 6.75 x 2 5.49 4.25 2.25 0.25 7.45 5.31 3.34 0.31 2.5 lbs. BP-64(191 x 139 x 158) (148 x 98 x 151) (108 x 57) (171 x 51) (140) (108) (57) (6) (189) (135) (85) (8)RJW606HPL 7.50 x 7.52 x 6.22 5.72 x 5.72 x 5.95 4.25 x 4.25 6.75 x 4 5.49 4.25 4.25 0.25 7.52 5.34 5.31 0.31 2.75 lbs. BP-66(191 x 191 x 158) (145 x 145 x 151) (108 x 108) (171 x 101) (140) (108) (108) (6) (191) (136) (135) (8)RJW806HPL 9.62 x 7.46 x 6.22 7.73 x 5.74 x 5.95 6.25 x 4.25 8.88 x 4 5.49 6.25 4.25 0.25 9.36 7.25 5.28 0.31 3.5 lbs. BP-86(244 x 190 x158) (196 x 146 x 151) (159 x 108) (225 x 101) (140) (159) (108) (6) (238) (185) (134) (8)RJW808HPL 9.56 x 9.38 x 6.26 7.73 x 7.73 x 5.89 8.75 x 6.00 6.25 x 6.25 5.31 6.25 6.25 0.25 9.37 7.17 7.17 0.31 1.84 lbs. BP-88(243 x 238 x 159) (196 x 196 x 150) (222 x 152) (159 x 159) (135) (159) (159) (6) (238) (182) (182) (8)RJW1008HPL 11.62 x 9.37 x 6.61 9.73 x 7.73 x 6.36 8.25 x 6.25 10.75 x 6 5.91 8.25 6.25 0.25 11.38 9.3 7.38 0.31 5 lbs. BP-108(295 x 238 x 168) (247 x 196 x 162) (210 x 159) (273 x 152) (150) (209) (159) (6) (289) (236) (188) (8)RJW1210HPL 13.56 x 11.43 x 6.61 11.79 x 9.80 x 6.32 10.25 x 8.25 12.75 x 8 5.87 10.25 8.25 0.25 13.41 11.2 9.23 0.31 6.5 lbs. BP-1210(344 x 291 x 168) (299 x 249 x 161) (260 x 210) (324 x 203) (149) (260) (209) (6) (341) (284) (234) (8)RJW1212HPL 13.56 x 13.38 x 7.73 11.70 x 11.70 x 7.36 12.75 x 10.00 10.25 x 10.25 6.78 10.25 10.25 0.25 13.38 11.17 11.17 0.31 3.34 lbs. BP-1212(344 x 340 x 196) (297 x 297 x 187) (324 x 254) (260 x 260) (172) (260) (260) (6) (340) (284) (284) (8)RJW1412HPL 15.50 x 13.38 x 7.69 13.53 x 11.55 x 7.45 12.25 x 10.25 14.62 x 10 6.87 12.25 10.25 0.25 15.42 13.2 11.16 0.31 8.5 lbs. BP-1412(394 x 340 x 195) (344 x 293 x 189) (311 x 260) (371 x 254) (174) (311) (260) (6) (392) (335) (284) (8)RJW1614HPL 17.53 x 15.43 x 7.71 15.63 x 13.60 x 7.45 14.25 x 12.25 16.75 x 12 6.87 14.25 12.25 0.25 17.43 15.2 13.24 0.31 11.5 lbs. BP-1614(445 x 392 x 196) (397 x 345 x 189) (362 x 311) (425 x 305) (174) (362) (311) (6) (443) (386) (336) (8)RJW1816HPL* 19.62 x 17.48 x 10.62 17.69 x 15.69 x 10.31 16.25 x 14.25 18.88 x 12 9.86 16.25 14.25 0.25 19.49 17.25 15.25 0.31 19.25 lbs. BP-1816(498 x 444 x 270) (449 x 399 x 262) (413 x 362) (479 x 305) (250) (413) (362) (6) (495) (438) (387) (8)RJW2016HPL* 22.00 x 17.56 x 10.64 19.72 x 15.72 x 10.33 18.25 x 14.25 21.25 x 10.00 9.87 18.25 14.25 0.25 21.56 19.31 15.39 0.31 20.25 lbs. BPJ2016(559 x 446 x 270) (501 x 399 x 262) (464 x 362) (540 x 254) (251) (464) (362) (6) (548) (490) (391) (8)All measures are in inches, items in parentheses are in millimeters.*1816, 2016 sizes not 6, 6P Rated<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com200
Technical Specifications - “RJW” Series“FHW” configuration - Fiberglass hinged, flush bonded window, 4 cover screwRJWRJW <strong>SE</strong>RIESFHWConstructionMaterialGasketPanhead screws<strong>Non</strong> metallic hingeStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsBonded windowRaised CoverHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental sealMinimizes protruding surfacesCorrosive resistant, removable hinge<strong>300</strong> Series stainless used on all external hardwareIntegral flange molded in place for ease of mountingPanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsPrecision routed flush bonded window for maximum visibilityExtended depth in coverNOTES:RJW1210FHWFHWFHWBack PanelsIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 322Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326FHWModifications See Special ModRight Modification pg 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322201<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“RJW” Series “FHW” Configuration Technical DrawingsWFBHOLE DIA.4 PLC'S.RJW <strong>SE</strong>RIESCNAAOAEHBMP<strong>SE</strong>CTION B-BLBack Panel Available(See Accessories)JDBK<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVER“RJW” Series <strong>Enclosures</strong> - “FHW” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CWINDOWAREA [MAX.]MOUNTINGE X F J K L M N O PHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERRJW806FHW 9.62 x 7.46 x 6.22 7.73 x 5.74 x 5.95 6.25 x 4.25 8.88 x 4 5.49 6.25 4.25 0.25 9.36 7.25 5.28 0.31 3.5 lbs. BP-86(244 x 190 x158) (196 x 146 x 151) (159 x 108) (225 x 101) (140) (159) (108) (6) (238) (185) (134) (8)RJW808FHW 9.56 x 9.38 x 6.26 7.73 x 7.73 x 5.89 8.75 x 6.00 6.25 x 6.25 5.31 6.25 6.25 0.25 9.37 7.17 7.17 0.31 1.84 lbs. BP-88(243 x 238 x 159) (196 x 196 x 150) (222 x 152) (159 x 159) (135) (159) (159) (6) (238) (182) (182) (8)RJW1008FHW 11.62 x 9.37 x 6.61 9.73 x 7.73 x 6.36 8.25 x 6.25 10.75 x 6 5.91 8.25 6.25 0.25 11.38 9.3 7.38 0.31 5 lbs. BP-108(295 x 238 x 168) (247 x 196 x 162) (210 x 159) (273 x 152) (150) (209) (159) (6) (289) (236) (188) (8)RJW1210FHW 13.56 x 11.43 x 6.61 11.79 x 9.80 x 6.32 10.25 x 8.25 12.75 x 8 5.87 10.25 8.25 0.25 13.41 11.2 9.23 0.31 6.5 lbs. BP-1210(344 x 291 x 168) (299 x 249 x 161) (260 x 210) (324 x 203) (149) (260) (209) (6) (341) (284) (234) (8)RJW1212FHW 13.56 x 13.38 x 7.73 11.70 x 11.70 x 7.36 12.75 x 10.00 10.25 x 10.25 6.78 10.25 10.25 0.25 13.38 11.17 11.17 0.31 3.34 lbs. BP-1212(344 x 340 x 196) (297 x 297 x 187) (324 x 254) (260 x 260) (172) (260) (260) (6) (340) (284) (284) (8)RJW1412FHW 15.50 x 13.38 x 7.69 13.53 x 11.55 x 7.45 12.25 x 10.25 14.62 x 10 6.87 12.25 10.25 0.25 15.42 13.2 11.16 0.31 8.5 lbs. BP-1412(394 x 340 x 195) (344 x 293 x 189) (311 x 260) (371 x 254) (174) (311) (260) (6) (392) (335) (284) (8)RJW1614FHW 17.53 x 15.43 x 7.71 15.63 x 13.60 x 7.45 14.25 x 12.25 16.75 x 12 6.87 14.25 12.25 0.25 17.43 15.2 13.24 0.31 11.5 lbs. BP-1614(445 x 392 x 196) (397 x 345 x 189) (362 x 311) (425 x 305) (174) (362) (311) (6) (443) (386) (336) (8)RJW1816FHW* 19.62 x 17.48 x 10.62 17.69 x 15.69 x 10.31 16.25 x 14.25 18.88 x 12 9.86 16.25 14.25 0.25 19.49 17.25 15.25 0.31 19.25 lbs. BP-1816(498 x 444 x 270) (449 x 399 x 262) (413 x 362) (479 x 305) (250) (413) (362) (6) (495) (438) (387) (8)RJW2016FHW* 22.00 x 17.56 x 10.64 19.72 x 15.72 x 10.33 18.25 x 14.25 21.25 x 10.00 9.87 18.25 14.25 0.25 21.56 19.31 15.39 0.31 20.25 lbs. BPJ2016(559 x 446 x 270) (501 x 399 x 262) (464 x 362) (540 x 254) (251) (464) (362) (6) (548) (490) (391) (8)All measures are in inches, items in parentheses are in millimeters.*1816, 2016 sizes not 6, 6P Rated<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com202
Technical Specifications - “RJW” Series“FHLL” configuration - Fiberglass hinged, flush bonded window, link lock latchRJWRJW <strong>SE</strong>RIESFHLLConstructionMaterialGasket<strong>Non</strong> metallic hingeStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsBonded windowRaised CoverHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental sealCorrosive resistant, removable hinge<strong>300</strong> Series stainless used on all external hardwareIntegral flange molded in place for ease of mountingPanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsPrecision routed flush bonded window for maximum visibilityExtended depth in coverRJW1008FHLLNOTES:FHLL Industry StandardsUL/cUL 50Not ListedNEMA 250 Type 1, 3, 12CSA Std C22.2Not ListedTemperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixFHLLBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 322Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326FHLLModifications See Special ModRight Modification pg 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322203<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“RJW” Series “FHLL” Configuration Technical DrawingsWFBHOLE DIA.4 PLC'S.RJW <strong>SE</strong>RIESCNAAOAEHBMP<strong>SE</strong>CTION B-BLBack Panel Available(See Accessories)JDBK<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVER“RJW” Series <strong>Enclosures</strong> - “FHLL” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CWINDOWAREA [MAX.]MOUNTINGE X F J K L M N O PHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERRJW806FHLL 9.62 x 7.46 x 6.22 7.73 x 5.74 x 5.95 6.25 x 4.25 8.88 x 4 5.49 6.25 4.25 0.25 9.36 7.25 5.28 0.31 3.5 lbs. BP-86(244 x 190 x158) (196 x 146 x 151) (159 x 108) (225 x 101) (140) (159) (108) (6) (238) (185) (134) (8)RJW808FHLL 9.56 x 9.38 x 6.26 7.73 x 7.73 x 5.89 8.75 x 6.00 6.25 x 6.25 5.31 6.25 6.25 0.25 9.37 7.17 7.17 0.31 1.84 lbs. BP-88(243 x 238 x 159) (196 x 196 x 150) (222 x 152) (159 x 159) (135) (159) (159) (6) (238) (182) (182) (8)RJW 1008FHLL 11.62 x 9.37 x 6.61 9.73 x 7.73 x 6.36 8.25 x 6.25 10.75 x 6 5.91 8.25 6.25 0.25 11.38 9.3 7.38 0.31 5 lbs. BP-108(295 x 238 x 168) (247 x 196 x 162) (210 x 159) (273 x 152) (150) (209) (159) (6) (289) (236) (188) (8)RJW 1210FHLL 13.56 x 11.43 x 6.61 11.79 x 9.80 x 6.32 10.25 x 8.25 12.75 x 8 5.87 10.25 8.25 0.25 13.41 11.2 9.23 0.31 6.5 lbs. BP-1210(344 x 291 x 168) (299 x 249 x 161) (260 x 210) (324 x 203) (149) (260) (209) (6) (341) (284) (234) (8)RJW1212FHLL 13.56 x 13.38 x 7.73 11.70 x 11.70 x 7.36 12.75 x 10.00 10.25 x 10.25 6.78 10.25 10.25 0.25 13.38 11.17 11.17 0.31 3.34 lbs. BP-1212(344 x 340 x 196) (297 x 297 x 187) (324 x 254) (260 x 260) (172) (260) (260) (6) (340) (284) (284) (8)RJW 1412FHLL 15.50 x 13.38 x 7.69 13.53 x 11.55 x 7.45 12.25 x 10.25 14.62 x 10 6.87 12.25 10.25 0.25 15.42 13.2 11.16 0.31 8.5 lbs. BP-1412(394 x 340 x 195) (344 x 293 x 189) (311 x 260) (371 x 254) (174) (311) (260) (6) (392) (335) (284) (8)RJW 1614FHLL 17.53 x 15.43 x 7.71 15.63 x 13.60 x 7.45 14.25 x 12.25 16.75 x 12 6.87 14.25 12.25 0.25 17.43 15.2 13.24 0.31 11.5 lbs. BP-1614(445 x 392 x 196) (397 x 345 x 189) (362 x 311) (425 x 305) (174) (362) (311) (6) (443) (386) (336) (8)RJW 1816FHLL* 19.62 x 17.48 x 10.62 17.69 x 15.69 x 10.31 16.25 x 14.25 18.88 x 12 9.86 16.25 14.25 0.25 19.49 17.25 15.25 0.31 19.25 lbs. BP-1816(498 x 444 x 270) (449 x 399 x 262) (413 x 362) (479 x 305) (250) (413) (362) (6) (495) (438) (387) (8)RJW 2016FHLL* 22.00 x 17.56 x 10.64 19.72 x 15.72 x 10.33 18.25 x 14.25 21.25 x 10.00 9.87 18.25 14.25 0.25 21.56 19.31 15.39 0.31 20.25 lbs. BPJ2016(559 x 446 x 270) (501 x 399 x 262) (464 x 362) (540 x 254) (251) (464) (362) (6) (548) (490) (391) (8)All measures are in inches, items in parentheses are in millimeters.*1816, 2016 sizes not 6, 6P Rated<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com204
Technical Specifications - “RJW” SeriesFHPL“FHPL” configuration - Fiberglass hinged, flush bonded window, padlock latchRJWRJW <strong>SE</strong>RIESFHPLConstructionMaterialGasket<strong>Non</strong> metallic hingeStainless Steel HardwareMolded in Mounting FlangeMounting BossesMetal insertsBonded windowRaised CoverHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental sealCorrosive resistant, removable hinge<strong>300</strong> Series stainless used on all external hardwareIntegral flange molded in place for ease of mountingPanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsPrecision routed flush bonded window for maximum visibilityExtended depth in coverRJW1210FHPLNOTES:FHPL Industry StandardsUL/cUL 50Not ListedNEMA 250 Type 1, 3, 12CSA Std C22.2Not ListedTemperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixFHPLBack PanelsAccessoriesORDERING INFOAluminum BP__AL pg. 329Fiberglass BP__FG pg. 329Stainless Steel BP__SS pg. 329Painted Carbon Steel BP__CS pg. 329Special AccessoriesSurface mount windows See ModRight section: pg. 315 - 322Terminal Kit TK__ pg. 339Encapsulated cover screws WP4PKENCAP pg. 325Vent DVK3KIT pg. 322Louver LPK3KIT pg. 325Carrying Handle RMEMK109506 pg. 326Fiberglass pedestals JP3336 pg. 327Assorted hubs and cord grips five assorted ranges pg. 327, 328Vapor capsule VC2-1 pg. 326FHPLModifications See Special ModRight Modification pg 315 - 322ORDERING INFORemovable dead front panels pg. 333Grounding stud pg. 339Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom window pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322205<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“RJW” Series “FHPL” Configuration Technical DrawingsWFBHOLE DIA.4 PLC'S.RJW <strong>SE</strong>RIESCNAAOAEHBMP<strong>SE</strong>CTION B-BLBack Panel Available(See Accessories)JDBK<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVER“RJW” Series <strong>Enclosures</strong> - “FHPL” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CWINDOWAREA [MAX.]MOUNTINGE X F J K L M N O PHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERRJW806FHPL 9.62 x 7.46 x 6.22 7.73 x 5.74 x 5.95 6.25 x 4.25 8.88 x 4 5.49 6.25 4.25 0.25 9.36 7.25 5.28 0.31 3.5 lbs. BP-86(244 x 190 x158) (196 x 146 x 151) (159 x 108) (225 x 101) (140) (159) (108) (6) (238) (185) (134) (8)RJW808FHPL 9.56 x 9.38 x 6.26 7.73 x 7.73 x 5.89 8.75 x 6.00 6.25 x 6.25 5.31 6.25 6.25 0.25 9.37 7.17 7.17 0.31 1.84 lbs. BP-88(243 x 238 x 159) (196 x 196 x 150) (222 x 152) (159 x 159) (135) (159) (159) (6) (238) (182) (182) (8)RJW1008FHPL 11.62 x 9.37 x 6.61 9.73 x 7.73 x 6.36 8.25 x 6.25 10.75 x 6 5.91 8.25 6.25 0.25 11.38 9.3 7.38 0.31 5 lbs. BP-108(295 x 238 x 168) (247 x 196 x 162) (210 x 159) (273 x 152) (150) (209) (159) (6) (289) (236) (188) (8)RJW1210FHPL 13.56 x 11.43 x 6.61 11.79 x 9.80 x 6.32 10.25 x 8.25 12.75 x 8 5.87 10.25 8.25 0.25 13.41 11.2 9.23 0.31 6.5 lbs. BP-1210(344 x 291 x 168) (299 x 249 x 161) (260 x 210) (324 x 203) (149) (260) (209) (6) (341) (284) (234) (8)RJW1212FHPL 13.56 x 13.38 x 7.73 11.70 x 11.70 x 7.36 12.75 x 10.00 10.25 x 10.25 6.78 10.25 10.25 0.25 13.38 11.17 11.17 0.31 3.34 lbs. BP-1212(344 x 340 x 196) (297 x 297 x 187) (324 x 254) (260 x 260) (172) (260) (260) (6) (340) (284) (284) (8)RJW 1412FHPL 15.50 x 13.38 x 7.69 13.53 x 11.55 x 7.45 12.25 x 10.25 14.62 x 10 6.87 12.25 10.25 0.25 15.42 13.2 11.16 0.31 8.5 lbs. BP-1412(394 x 340 x 195) (344 x 293 x 189) (311 x 260) (371 x 254) (174) (311) (260) (6) (392) (335) (284) (8)RJW 1614FHPL 17.53 x 15.43 x 7.71 15.63 x 13.60 x 7.45 14.25 x 12.25 16.75 x 12 6.87 14.25 12.25 0.25 17.43 15.2 13.24 0.31 11.5 lbs. BP-1614(445 x 392 x 196) (397 x 345 x 189) (362 x 311) (425 x 305) (174) (362) (311) (6) (443) (386) (336) (8)RJW 1816FHPL* 19.62 x 17.48 x 10.62 17.69 x 15.69 x 10.31 16.25 x 14.25 18.88 x 12 9.86 16.25 14.25 0.25 19.49 17.25 15.25 0.31 19.25 lbs. BP-1816(498 x 444 x 270) (449 x 399 x 262) (413 x 362) (479 x 305) (250) (413) (362) (6) (495) (438) (387) (8)RJW 2016FHPL* 22.00 x 17.56 x 10.64 19.72 x 15.72 x 10.33 18.25 x 14.25 21.25 x 10.00 9.87 18.25 14.25 0.25 21.56 19.31 15.39 0.31 20.25 lbs. BPJ2016(559 x 446 x 270) (501 x 399 x 262) (464 x 362) (540 x 254) (251) (464) (362) (6) (548) (490) (391) (8)All measures are in inches, items in parentheses are in millimeters.*1816, 2016 sizes not 6, 6P Rated<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com206
The “Fatboy” SeriesSSHFATBOY <strong>SE</strong>RIESIndustry’s unique requirement for extra deep enclosure withoutsignificantly increasing the length and width of the enclosure is metwith <strong>Stahlin</strong>’s extra deep Fatboy series.The Fatboy series is a clam shell style enclosure, noted by nearequidistant capacity in both the cover and base. The series employs aflange mount base for ease of installation, a stainless steel full lengthhinge and stainless steel securing latch. Door clearance to the installedequipment must be considered when specifying this enclosure.The demands for cover mounted components such as DIN facings ormultiple contact pushbuttons are met with ample depth from the coveror with substantial height for panel mounted components.This series is available in opaque and window form under its own partnumber sequence.Ordering Information - Deriving <strong>Catalog</strong> NumbersFamily ID Size ID Configuration ID EXAMPLEJ XXXX SSH “J8068SSH”Fatboy Series with Opaque Cover Attributes●●●●●●●Clam shell design, opening from the middle of the enclosureAll stainless hardware latches and screwsMemory retaining polyurethane gasket between cover and basesFull length stainless steel hingeChemically resistant fiberglass reinforced polyesterIntegral mounting flangeOpaque cover“SSH” Series Specifications●Water tight●UL/cUL approved●Corrosion Resistant●Fire resistant● Rated Type 1, 3, 4X, 12●Light weightLISTEDLISTED●CSA approved<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com207
The Fatboy SeriesFATBOY <strong>SE</strong>RIE<strong>SE</strong>xtra Deep <strong>Enclosures</strong> - “Fatboy” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJ6048SSH 7.50 x 4.94 x 9.07 5.84 x 3.85 x 8.81 6.75 x 2.00 8.36 4.25 2.25 .25 6.89 .31 3 BP64(190 x 125 x 230) (148 x 98 x 224) (171 x 51) (212) (108) (57) (6) (175) (8)J6068SSH 7.50 x 6.88 x 9.07 5.72 x 5.72 x 8.81 6.75 x 4.00 8.36 4.25 4.25 .25 6.89 .31 3 BP66(190 x 175 x 230) (145 x 145 x 224) (171 x 101) (212) (108) (108) (6) (175) (8)J8068SSH 9.62 x 6.84 x 9.07 7.73 x 5.74 x 8.82 8.88 x 4.00 8.37 6.25 4.25 .25 8.87 .31 4 BP86(244 x 174 x 230) (196 x 146 x 224) (225 x 101) (213) (159) (108) (6) (225) (8)J8088SSH 9.56 x 8.84 x 9.43 7.73 x 7.73 x 9.18 8.75 x 6.00 8.60 6.25 6.25 .25 8.84 .31 5 BP88(243 x 224 x 239) (196 x 196 x 233) (222 x 152) (219) (159) (159) (6) (224) (8)J10088SSH 11.62 x 8.81 x 8.09 9.73 x 7.73 x 7.84 10.75 x 6.00 7.39 8.25 6.25 .25 10.86 .31 6 BP108(295 x 224 x 206) (247 x 196 x 199) (273 x 152) (188) (209) (159) (6) (276) (8)J121010SSH 13.56 x 10.83 x 10.06 11.79 x 9.80 x 9.81 12.75 x 8.00 9.36 10.25 8.25 .25 12.95 .31 8 BP1210(344 x 275 x 256) (299 x 249 x 249) (324 x 203) (238) (260) (209) (6) (329) (8)J121212SSH 13.56 x 12.84 x 12.37 11.70 x 11.70 x 12.12 12.75 x 10.00 11.54 10.25 10.25 .25 12.84 .31 9 BP1212(344 x 326 x 314) (297 x 297 x 308) (324 x 254) (293) (260) (260) (6) (326) (8)J141212SSH 15.50 x 12.83 x 12.06 13.50 x 11.55 x11.81 14.62 x 10.00 11.23 12.25 10.25 .25 14.88 .31 12 BP1412(394 x 326 x 306) (343 x 293 x <strong>300</strong>) (371 x 254) (285) (311) (260) (6) (378) (8)J161412SSH 17.53 x 14.88 x 12.05 15.63 x 13.60 x 11.81 16.75 x 12.00 11.23 14.25 12.25 .25 16.95 .31 14 BP1614(445 x 378 x 306) (397 x 345 x <strong>300</strong>) (425 x 305) (285) (362) (311) (6) (431) (8)J181617SSH 19.62 x 16.91 x 17.19 17.69 x 15.69 x 16.81 18.88 x 12.00 16.36 16.25 14.25 .25 18.91 .31 22 BP1816(498 x 429 x 436) (449 x 398 x 427) (479 x 305) (415) (413) (362) (6) (480) (8)J201617SSH 22.00 x 17.00 x 17.21 19.71 x 15.71 x 16.81 21.25 x 10.00 16.36 18.25 14.25 .25 21.00 .31 25 BPJ2016(558 x 431 x 437) (501 x 399 x 427) (540 x 254) (415) (464) (362) (6) (533) (8)Caution: Metic units are for reference; do not convert.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com208
The “Fatboy” SeriesSSHFATBOY <strong>SE</strong>RIESIndustry’s unique requirement for extra deep enclosure withoutsignificantly increasing the length and width of the enclosure is metwith <strong>Stahlin</strong>’s extra deep with window “SSH” series.The “SSH” series is a clam shell style enclosure, noted by nearequidistant capacity in both the cover and base. The series employs aflange mount base for ease of installation, a stainless steel full lengthhinge and stainless steel securing latch. Environmental ratings aremaintained even when flush mounted windows are installed. Doorclearance to the installed equipment must be considered whenspecifying this enclosure.The demands for cover mounted components such as DIN facings ormultiple contact pushbuttons are met with ample depth from the coveror with substantial height for panel mounted components.Flush bonded windows are used for added visibility making this asignificantly practical solution when surrounding space is at a premium.Custom window sizing is available by specification. Consult factory forassistance.Ordering Information - Deriving <strong>Catalog</strong> NumbersFamily ID Size ID Configuration ID EXAMPLEJW XXXX SSH “JW8068SSH”Fatboy Series with Flush Bonded Window Attributes●●●●●●●Clam shell design, opening from the middle of the enclosureAll stainless hardware latches and screwsMemory retaining polyurethane gasket between cover and basesFull length stainless steel hingeChemically resistant fiberglass reinforced polyesterIntegral mounting flangeFlush bonded UVA acrylic window“SSH” Series Specifications●Water tight●UL/cUL approved●Corrosion Resistant●Fire resistant● Rated Type 1, 3, 4X, 12●Light weightLISTEDLISTED●CSA approved<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com209
The Fatboy SeriesFATBOY <strong>SE</strong>RIE<strong>SE</strong>xtra Deep <strong>Enclosures</strong> with Windows - “Fatboy” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NWINDOW AREAP X QHOLE ENCLOSUREDIA. WEIGHTPANELNUMBERJW606SSH 7.50 x 6.88 x 907 5.72 x 5.72 x 8.69 6.75 x 4.00 8.23 4.25 4.25 .25 6.89 2.88 x 2.88 .31 3 BP66(190 x 175 x 230) (145 x 145 x 221) (171 x 101) (209) (108) (108) (6) (175) (73 x 73) (8)JW8068SSH 9.62 x 6.84 x 9.07 7.73 x 5.74 x 8.69 8.88 x 4.00 8.23 6.25 4.25 .25 8.87 4.88 x 2.88 .31 4 BP86(244 x 174 x 230) (196 x 146 x 221) (225 x 101) (209) (159) (108) (6) (225) (124 x 73) (8)JW8088SSH 9.56 x 8.84 x 9.43 7.73 x 7.73 x 9.06 8.75 x 6.00 8.48 6.25 6.25 .25 8.84 4.88 x 4.88 .31 5 BP88(243 x 224 x 239) (196 x 196 x 230) (222 x 152) (215) (159) (159) (6) (224) (124 x 124) (8)JW10088SSH 11.62 x 8.81 x 8.09 9.73 x 7.73 x 7.84 10.75 x 6.00 7.39 8.25 6.25 .25 10.86 6.88 x 4.88 .31 6 BP108(295 x 224 x 206) (247 x 196 x 199) (273 x 152) (188) (209) (159) (6) (276) (175 x 124) (8)JW121010SSH 13.56 x 10.83 x 10.06 11.79 x 9.80 x 9.69 12.75 x 8.00 9.24 10.25 8.25 .25 12.95 8.88 x 6.88 .31 8 BP1210(344 x 275 x 256) (299 x 249 x 246) (324 x 203) (235) (260) (209) (6) (329) (225 x175) (8)JW121212SSH 13.56 x 12.84 x 12.37 11.70 x 11.70 x 12.00 12.75 x 10.00 11.42 10.25 10.25 .25 12.84 8.88 x 8.88 .31 9 BP1212(344 x 326 x 314) (297 x 297 x 305) (324 x 254) (293) (260) (260) (6) (326) (225 x 225) (8)JW141212SSH 15.50 x 12.83 x 12.06 13.50 x 11.55 x 11.69 14.62 x 10.00 11.11 12.25 10.25 .25 14.88 10.88 x 8.88 .31 12 BP1412(394 x 326 x 306) (343 x 293 x 297) (371 x 254) (282) (311) (260) (6) (378) (276 x 225) (8)JW161412SSH 17.53 x 14.88 x 12.05 15.63 x 13.60 x 11.70 16.75 x 12.00 11.12 14.25 12.25 .25 16.95 12.88 x 10.88 .31 14 BP1614(445 x 378 x 306) (397 x 345 x 297) (425 x 305) (282) (362) (311) (6) (431) (327 x 276) (8)JW181617SSH 19.62 x 16.91 x 17.19 17.69 x 15.69 x 16.69 18.88 x 12.00 16.24 16.25 14.25 .25 18.91 14.88 x 12.88 .31 22 BP1816(498 x 429 x 436) (449 x 398 x 424) (479 x 305) (412) (413) (362) (6) (480) (378 x 327) (8)JW201617SSH 22.00 x 17.00 x 17.21 19.71 x 15.71 x 16.69 21.25 x 10.00 16.24 18.25 14.25 .25 21.00 16.88 x 12.88 .31 25 BPJ2016(558 x 431 x 437) (501 x 399 x 424) (540 x 254) (412) (464) (362) (6) (533) (428 x 327) (8)Caution: Metic units are for reference; do not convert.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com210
The “TeleControl” SeriesHPLTC“TELECONTROL”The J1407TC is part of <strong>Stahlin</strong>’s TeleControl productline of non-metallic enclosures for industrialtelecommunications.J1407HPLJ1407TC“TeleControl” Series Attributes●●●●●●●14.0 x 7.0 x 6.5 (Inside Dimensions), NEMA 4X integrity construction.Corrosion, chemical and impact-resistant fiberglass reinforced polyester durability.Easy to standardize throughout an entire plant.Enclosure available with or without phone mounting back panel and phone-shaped window.Standard package does not include actual phone and installation of phone. Both are, however, availableas a factory modification. Inquire as to details.Standard color: Glacier Gray. Enclosure can be custom molded in any color.Other non-metallic enclosures available with phone window and phone mounting option.“TeleControl” Series Specifications●Water tight● Rated NEMA 1, 3,●Fire resistant●Submersible4X, 6P, 12●Light weight●Corrosion Resistant●UL/cUL approvedLISTEDLISTED●CSA approved<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com211
The “TeleControl” Series “HPL & TC” Configuration Technical Drawings“TELECONTROL”“TeleControl” <strong>Enclosures</strong> - “HPL & TC” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NHOLEDIA.ENCLOSUREWEIGHTPANELNUMBERJ1407HPL 15.87 x 8.75 x 6.81 14.00 x 7.00 x 6.56 15 x 5 6.12 12.25 5.25 0.25 15.75 0.31 6.25 lbs. BP-1407AL(no window) (403 x 222 x 173) (356 x 178 x 167) (381 x 127) (156) (311) (133) (6) (400) (8)J1407TC 15.87 x 8.75 x 6.81 14.00 x 7.00 x 6.56 15 x 5 6.12 12.25 5.25 0.25 15.75 0.31 6.25 lbs. BP-1407AL(w/ window) (403 x 222 x 173) (356 x 178 x 167) (381 x 127) (156) (311) (133) (6) (400) (8)<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com212
The DuraBoxx SeriesDThe DuraBoxx SeriesThe <strong>Stahlin</strong> Duraboxx Series was developed for extremeruggedness, sleek design, and shallow depths. These enclosures wereDuraBoxxdesigned for rugged durable performance in both commercial andindustrial indoor and outdoor environments such as mining, oil, gas,wastewater treatment, and petro-chem. Also because of their pleasingaesthetics and flush cover design they are well suited for high-endelectronic applications such as wireless communications and operatorinterfaces.DuraBoxx Series Attributes●11 sizes available● Size range from 5" x 5" to 24" x 16"● Flat cover with captive cover screws● DIN rail mounting capabilities● No sidewall obstructions, flush cover● Submersion rated● Up to NEMA 4X, 6P and IEC IP66, IP68SeamlessPolyurethaneDoor GasketEconomicalSolid ConstructionCompression Molded,Fiberglass ReinforcedPolyesterFeatured Highlights“DuraBoxx” Industrial ToughFlush Fitting CoverRecessed CaptiveScrews“DuraBoxx” Series Specifications●Water tight●Fire resistant●IEC IP66, IP68●Submersible●Light weight●UL/cUL approved●Corrosion Resistant● Rated NEMA 1, 3, 4X, 6P, 12●CSA approvedLISTEDLISTEDThe “DuraBoxx” Series is Applicable for Many Industries including:OEM &Instrumentation DesignsPump Control SystemsPulp & PaperProcessing ControlsSCADA Systems
DuraBoxxThe DuraBoxx Series● Eleven basic sizes● One basic concept● One configuration (W)
The “D” SeriesDDuraBoxx<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong>introduces its new family ofDuraBoxx high-quality, cost-effectivefiberglass enclosures.Highlighted by a rugged industrialdesign, chemical and corrosionresistance, plus watertightperformance, DuraBoxx <strong>Enclosures</strong>specialize as natural problem solvers in shallow depth areas. They“fit” and protect where other enclosures don’t!DuraBoxx <strong>Enclosures</strong> are manufactured to internationalstandard specifications from fiberglass-reinforced polyesterproduced using UV stabilized sheet molding compound and hotcompression-molded to a smooth, light gray surface. Eight smallersizes are available in NEMA 6P as enclosures with opaque screwdowncovers, completely assembled and ready for installation.Three larger sizes provide NEMA 4X in screw cover.Corresponding IEC international ratings will apply.“D” Series Shared CharacteristicsConstructionMaterialGasketRecessed Cover ScrewsBrass Inserts in all FixingPositionsTongue And Groove DesignExternal Hinge CapabilityCaptive Cover ScrewsColorFiberglass Reinforced Polyester.Maximum strength, light weight,maximum protection against aggressiveenvironments.Poured in place polyurethane gaskethas excellent compression recovery,exceptional life, positive seal betweencover and base.Minimizes conflicts with cover mountedcomponents. Cosmetically pleasingappearance. Stainless steel.All hardware screws down into metalsurfaces insuring strength and integrityover life of the enclosure.Holds gasket solidly in place.Maintains maximum seal through evencompression.Converts screw cover to hinge coverwhile preserving full sealing integrity ofthe enclosure.Cover can be removed without losing ormisplacing the cover screws.Glacier Gray“D” Series Ordering InformationUse the information below to derive specific catalog numbers. <strong>Stahlin</strong>catalog numbers first begin with Family ID, then size ID and configurationID as a suffix. See the example below.Ordering Information - Deriving <strong>Catalog</strong> NumbersFamily ID Size ID Configuration ID EXAMPLED XXXX Conf. ID = “D554W”“D” Series - Inside DimensionsSize ID H x W x D Optional Panel #D554 4.33 x 4.41 x 3.15 D554BPD594 4.33 x 8.27 x 3.15 D594BPD774 5.79 x 5.79 x 3.11 D774BPD7114 5.79 x 9.72 x 3.11 D7114BPD10105 9.29 x 9.49 x 4.29 D10105BPD10165 9.29 x 15.20 x 4.29 D10165BPD14144 13.66 x 13.66 x 3.11 D14144BPD16165 15.39 x 15.20 x 4.29 D16165BPOptional back panels available in various materials. Details on the following pages.“D” Series - ConfigurationsConfigurationIDDESCRIPTIONWFlush fitting cover fastened by captive lid screwsPhysical CharacteristicsRugged DesignHeavy duty applications coupled withcorrosion resistance make DuraBoxxproducts an ideal solution for uniqueindustry requirements.Smooth, Unobstructed Sides No obstruction for conduit and hubs orside mounted hardware. Reducesmounting conflicts.Direct to Wall Mounting Simplified mounting system No interferencewith extended feet or hard to reachscrews.Ease of DIN Rail Mount Allows quick change of assembly. Easyaddition of new rail and components.Industry Efficient Dimensions Unique profile dimensions solveunusual space application problems inprocess control industries, car washsystems and many other MROapplications.Flush Body DesignSmooth continuous edge between coverand base minimizes mounting spacerequirements and provides a commerciallypleasing look.Low Profile SizesAttractive slim line design. Minimizesexcess depth for larger size enclosures.Industry StandardsUL/cUL 50/508 File E64358 Type 1, 3, 3S, 4X, 6, 6P, 12NEMA 250 Type 1, 3, 3S, 4X, 6, 6P, 12IEC 529IP66, IP67, IP68Flammability Rating UL94V-0Self extinguishing<strong>Non</strong>-flame propagatingModels AffectedD554W, D594W, D774W, D10105W,D10165W, D14144W, D16165WAbove enclosure ratings not affected byaddition of polyamide hinge.215<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
WTechnical Specifications - “D” Series“W” configuration - Flush fitting cover fastened by captive lid screws.DW ConstructionMaterialGasketRecessed Cover ScrewsBrass Inserts in all FixingPositionsTongue And Groove DesignExternal Hinge CapabilityCaptive Cover ScrewsFiberglass Reinforced Polyester. Maximum strength, light weight, maximumprotection against aggressive environments.Poured in place polyurethane gasket has excellent compression recovery,exceptional life, positive seal between cover and base.Minimizes conflicts with cover mounted components. Cosmetically pleasingappearance.All hardware screws down into metalsurfaces insuring strength and integrity over life of the enclosure.Holds gasket solidly in place. Maintains maximum seal through evencompression.Smooth continuous edge between cover and base minimizes mountingspace requirements and provides a commercially pleasing look.Cover can be removed without losing or misplacing the cover screws.DuraBoxxD554WNOTES:WWIndustry StandardsUL/cUL 50/508 File E64358 Type 1, 3, 3S, 4X, 6, 6P, 12NEMA 250 Type 1, 3, 3S, 4X, 6, 6P, 12IEC 529IP66, IP67, IP68Models AffectedD554W, D594W, D774W, D10105W, D10165W, D14144W, D16165WAbove enclosure ratings not affected by addition of polyamide hinge.AccessoriesBack PanelsORDERING INFOCarbon Steel D_BP Details on the following pagesSpecial AccessoriesPolyamide Hinge DHingeKit Details on the following pagesWModifications See Special ModRight Modification pg315 - 322ORDERING INFODuraBoxx Series Optional Mounting DMTGKIT See ModRight Section 315 - 322WFlush fitting cover fastened by captive lid screws.Design Features● Mated cover and base with small raised edge to center a matinggroove in the cover.● No cover overhang, no sidewall obstruction.● All cover securing hardware functions outside of the sealing lip of theenclosure.● Unobstructed sidewalls for easy conduit entry. There are no ribs ormolded channels to obstruct fittings and connectors mounted from theoutside.● A square wall design allows for close proximity mounting to otherenclosures or mounted obstacles.D554W<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com216
“D” Series “W” Configuration Technical DrawingsDuraBoxxDuraBoxx D Series <strong>Enclosures</strong>ENCL.MODEL NO.OVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M N PENCL.WEIGHTPANELNO.D554W 4.72 x 4.80 x 3.58 4.33 x 4.41 x 3.15 3.23 x 4.17 2.83 2.05 3.74 2.56 3.50 N/A 1.7 LB D554BP(120 x 122 x 91) (110 x 112 x 80) (82 x 106) (72) (52) (95) (65) (89)D594W 4.72 x 8.66 x 3.58 4.33 x 8.27 x 3.15 3.23 x 8.03 2.83 2.05 7.60 2.56 7.36 N/A 2.5 LB D594BP(120 x 220 x 91) (110 x 210 x 80) (82 x 204) (72) (52) (193) (65) (187)D774W 6.30 x 6.30 x 3.58 5.79 x 5.79 x 3.11 4.33 x 5.51 2.81 2.99 5.20 3.50 4.68 N/A 2.8 LB D774BP(160 x 160 x 91) (147 x 147 x 79) (110 x 140) (71) (76) (132) (89) (119)D7114W 6.30 x 10.24 x 3.58 5.79 x 9.72 x 3.11 4.33 x 9.45 2.81 2.99 9.13 3.50 8.62 N/A 3.8 LB D7114BP(160 x 260 x 91) (147 x 247 x 79) (110 x 240) (71) (76) (232) (89) (219)D10105W 9.84 x 10.04 x 4.76 9.29 x 9.49 x 4.29 7.87 x 9.25 3.99 3.94 8.94 7.05 8.43 N/A 6.4 LB D10105BP(250 x 255 x 121) (236 x 241 x 109) (200 x 235) (101) (100) (227) (179) (214)D10165W 9.84 x 15.75 x 4.76 9.29 x 15.20 x 4.29 7.87 x 14.96 3.99 3.94 14.65 7.05 14.13 N/A 8.8 LB D10165BP(250 x 400 x 121) (236 x 386 x 109) (200 x 380) (101) (100) (327) (179) (359)D14144W 14.17 x 14.17 x 3.58 13.66 x 13.66 x 3.11 12.20 x 13.39 2.51 531 13.07 11.38 12.56 2.68 8.0 LB D14144BP(360 x 360 x 91) (347 x 347 x 79) (310 x 340) (71) (135) (332) (289) (319) (68)D16165W 15.94 x 15.75 x 4.76 15.39 x 15.20 x 4.29 13.98 x 14.96 3.99 9.84 15.12 13.62 14.13 N/A 11.0 LB D16165BP(405 x 400 x 121) (391 x 386 x 109) (355 x 380) (101) (250) (384) (346) (359)217<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“D” Series “W” Accessories Technical DrawingsDuraBoxxDuraBoxx D SeriesPolyamide Hinge AccessoryU<strong>SE</strong>D WITHMODEL NO.HINGEKIT NO.NO. OFHINGESD554W DHingeKit 2D594W DHingeKit 2D774W DHingeKit 2D7114W DHingeKit 2D10105W DHingeKit 2D10165W DHingeKit 2D14144W DHingeKit 2D16165W DHingeKit 2Note: Hinge Kits are field installable or as a modification.DuraBoxx D Series Back Panel DimensionsBACK PANELMODEL NO. BA BB BC BD BE BF BG BH# OFHOLESD554BP 4.21 2.44 2.05 N/A 4.29 3.74 3.39 2.83 6(107) (62) (52) (109) (95) (86) (72)D594BP 4.21 2.44 2.05 N/A 8.15 7.60 7.24 6.69 6(107) (62) (52) (207) (193) (184) (170)D774BP 5.67 3.43 2.99 N/A 5.67 5.20 4.61 4.02 6(144) (87) (76) (144) (132) (117) (102)D7114BP 5.67 3.43 2.99 N/A 9.61 9.13 8.54 7.95 6(144) (87) (76) (244) (232) (217) (202)D10105BP 9.17 6.93 3.94 N/A 9.37 8.94 8.31 7.72 6(233) (176) (100) (238) (227) (211) (196)D10165BP 9.17 6.93 3.94 N/A 15.08 14.65 14.02 13.43 6(233) (176) (100) (383) (372) (356) (341)D14144BP 13.54 11.30 10.63 5.35 13.54 13.07 12.48 11.89 10(344) (287) (270) (136) (344) (332) (317) (302)D16165BP 15.28 13.03 9.84 N/A 15.04 14.65 13.98 13.43 6(388) (331) (250) (382) (372) (355) (341)Caution: Metric units are for reference; do not convert.DuraBoxx D Series Optional MountingU<strong>SE</strong>D WITHMODEL NO.MOUNTINGQ X RMTG FOOTKIT NO.D554W 3.23 x 5.98 DMTGKIT(82 x 152)D594W 3.23 x 9.84 DMTGKIT(82 x 250)D774W 4.33 x 7.32 DMTGKIT(110 x 186)D7114W 4.33 x 11.26 DMTGKIT(110 x 286)D10105W 7.87 x 11.06 DMTGKIT(200 x 281)D10165W 7.87 x 16.77 DMTGKIT(200 x 426)D14144W 12.20 x 15.20 DMTGKIT(310 x 386)D16165W 13.98 x 16.77 DMTGKIT(355 x 426)<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com218
The “DL” SeriesDLDuraBoxx<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong>introduces its new family of DuraBoxxhigh-quality, cost-effective fiberglassenclosures.Highlighted by a rugged industrialdesign, chemical and corrosion resistance,plus watertight performance, DuraBoxx<strong>Enclosures</strong> specialize as natural problem solvers in shallow depthareas. They “fit” and protect where other enclosures don’t!DuraBoxx <strong>Enclosures</strong> are manufactured to internationalstandard specifications from fiberglass-reinforced polyesterproduced using UV stabilized sheet molding compound and hotcompression-molded to a smooth, light gray surface.“DL” Series Shared CharacteristicsConstructionMaterialGasketRecessed Cover ScrewsBrass Inserts in all FixingPositionsTongue in Groove DesignExternal Hinge CapabilityCaptive Cover ScrewsColorFiberglass Reinforced Polyester.Maximum strength, light weight,maximum protection against aggressiveenvironments.Poured in place polyurethane gaskethas excellent compression recovery,exceptional life, positive seal betweencover and base.Minimizes conflicts with cover mountedcomponents. Cosmetically pleasingappearance. Stainless steel.All hardware screws down into metalsurfaces insuring strength and integrityover life of the enclosure.Holds gasket solidly in place.Maintains maximum seal through evencompression.Converts screw cover to hinge coverwhile preserving full sealing integrity ofthe enclosure.Cover can be removed without losing ormisplacing the cover screws.Glacier Gray“DL” Series Ordering InformationUse the information below to derive specific catalog numbers. <strong>Stahlin</strong>catalog numbers first begin with Family ID, then size ID and configurationID as a suffix. See the example below.Ordering Information - Deriving <strong>Catalog</strong> NumbersFamily ID Size ID Configuration ID EXAMPLEDL XXXX Conf. ID = “DL18127W”“D” Series - Inside DimensionsSize ID H x W x D Optional Panel #DL18127 15.02 x 9.12 x 6.85 DL18127BPDL18168 15.56 x 13.59 x 7.99 DL18168BPDL24168 22.67 x 15.55 x 7.99 DL24168BPOptional back panels available in various materials. Details on the following pages.“DL” Series - ConfigurationsConfigurationIDDESCRIPTIONWFlush fitting cover fastened by captive lid screwsPhysical CharacteristicsRugged DesignHeavy duty applications coupled withcorrosion resistance make DuraBoxxproducts an ideal solution for uniqueindustry requirements.Smooth, Unobstructed Sides No obstruction for conduit and hubs orside mounted hardware. Reducesmounting conflicts.Direct to Wall Mounting Simplified mounting system No interferencewith extended feet or hard to reachscrews.Ease of DIN Rail Mount Allows quick change of assembly. Easyaddition of new rail and components.Industry Efficient Dimensions Unique profile dimensions solveunusual space application problems inprocess control industries, car washsystems and many other MROapplications.Flush Body DesignSmooth continuous edge between coverand base minimizes mounting spacerequirements and provides a commerciallypleasing look.Low Profile SizesAttractive slim line design. Minimizesexcess depth for larger size enclosures.Industry StandardsUL/cUL 50/508 File E64358 Type 1, 3, 3S, 4X, 12NEMA 250 Type 1, 3, 3S, 4X, 12IEC 529IP66Flammability Rating UL94V-0Self extinguishing<strong>Non</strong>-flame propagatingModels AffectedDL18127W, DL18168W, DL24168WAbove versions maintain a Type 4X/IP66rating when hinge is installed.219<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
WTechnical Specifications - “DL” Series“W” configuration - Flush fitting cover fastened by captive lid screws.DLW ConstructionMaterialGasketRecessed Cover ScrewsBrass Inserts in all FixingPositionsTongue And Groove DesignExternal Hinge CapabilityCaptive Cover ScrewsFiberglass Reinforced Polyester. Maximum strength, light weight, maximumprotection against aggressive environments.Poured in place polyurethane gasket has excellent compression recovery,exceptional life, positive seal between cover and base.Minimizes conflicts with cover mounted components. Cosmetically pleasingappearance.All hardware screws down into metalsurfaces insuring strength and integrity over life of the enclosure.Holds gasket solidly in place. Maintains maximum seal through evencompression.Smooth continuous edge between cover and base minimizes mountingspace requirements and provides a commercially pleasing look.Cover can be removed without losing or misplacing the cover screws.DuraBoxxDL18127WNOTES:W Industry StandardsUL/cUL 50/508 File E64358 Type 1, 3, 3S, 4X, 12NEMA 250 Type 1, 3, 3S, 4X, 12IEC 529IP66Models AffectedDL18127, DL18168, DL24168Above enclosure ratings not affected by addition of polyamide hinge.W AccessoriesBack PanelsORDERING INFOCarbon Steel DL_BP Details on the following pagesSpecial AccessoriesPolyamide Hinge DLHingeKit Details on the following pagesWModifications See Special ModRight Modification pg 315 - 322ORDERING INFODuraBoxx Series Optional Mounting DLMTGKIT See ModRight Section 315 - 322WFlush fitting cover fastened by captive lid screws.Design Features● Solid construction fiberglass reinforced polyester with a screw held cover and base.● Mated cover and base with small raised edge to center a mating groove in the cover.● Foamed-in channel polyurethane gasket.● Smooth edged mating of cover to base.● No cover overhang, no sidewall obstruction.● All cover securing hardware functions outside of the sealing lip of the enclosure.● Cover screws are made of stainless steel to maintain the corrosion resistant integrity.● Captive screws in cover.● Designed for direct to wall mounting or with use of external mounting feet.● Unobstructed sidewalls for easy conduit entry. There are no ribs or molded channels to obstruct fittings and connectors mountedfrom the outside.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com220
“DL” Series “W” Configuration Technical DrawingsDuraBoxxDuraBoxx DL Series <strong>Enclosures</strong>ENCL.MODEL NO.OVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K LENCL.WEIGHTPANELNO.DL18127W 16.53 x 10.63 x 7.22 15.02 x 9.12 x 6.85 12.66 x 7.17 6.26 13.46 5.83 7 LBS DL18127BP(420 x 270 x 183) (382 x 232 x 174) (321 x 182) (159) (342) (148)DL18168W 16.53 x 14.57 x 8.43 15.56 x 13.59 x 7.99 13.53 x 11.56 7.44 4.25 12.24 10 LBS DL18168BP(420 x 370 x 211) (395 x 345 x 207) (344 x 294) (189) (108) (311)DL24168W 23.63 x 16.53 x 8.43 22.67 x 15.55 x 7.99 20.63 x 13.53 7.44 21.34 14.21 16 LBS DL24168BP(600 x 420 x 211) (576 x 395 x 207) (524 x 394) (189) (542)Caution: Metric units are for reference; do not convert.221<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“DL” Series “W” Accessories Technical DrawingsDuraBoxxDuraBoxx DL SeriesPolyamide Hinge AccessoryU<strong>SE</strong>D WITHMODEL NO.HINGEKIT NO.NO. OFHINGESDL18127W DLHingeKit1 2DL18168W DLHingeKit2 2DL24168W DLHingeKit3 2Note: Hinge Kits are field installable or as a modification.DuraBoxx DL Series Back Panel DimensionsBACK PANELMODEL NO. BA BB BC BD# OFHOLESDL18127BP 13.94 13.46 8.46 7.95 4(354) (342) (215) (202)DL18168BP 14.80 14.25 12.83 12.24 4(376) (362) (326) (311)DL24168BP 21.89 21.34 14.84 14.21 4(556) (542) (377) (361)Caution: Metric units are for reference; do not convert.DuraBoxx DL Series Optional MountingU<strong>SE</strong>D WITHMODEL NO.MOUNTINGQ X RMOUNTINGS X TMTG FOOTKIT NO.DL18127W 12.66 x 11.34 N/A DLMTGKIT(321 x 288)DL18168W 13.53 x 15.73 17.70 x 11.56 DLMTGKIT(344 x 400) (450 x 294)DL24168W 20.63 x 17.70 24.80 x 13.53 DLMTGKIT(524 x 450) (630 x 344)<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com222
The “Small Junction” SeriesSMALL JUNCTION<strong>SE</strong>RIESThe “Small Junction” SeriesThe “Small Junction” Series is built around two enclosure designs, a slim style and a overhang cover style configuration.Both are designed from fiberglass reinforced polyester and feature a continuous polyurethane gasket that provides a completeenvironmental seal.These enclosures are ideal for compact or portable control or simply as a small junction box. Both of these streamlinedseries feature unobstructed sidewalls, captive stainless steel cover screws and a full range of sizes.An alternate design has a small overhang cover but also adds back panelmounting capabilities. Both series require factory modification for externalmounting feet. Please consult factory.“Small Junction” series enclosures are designed for generalMemory Retaining ContinuousPolyurethane Gasketelectrical and electronic applications and any application thathas associated environmental concerns.Junction” Featured Highlights“Small Captive StainlessSteel Cover Screws“Small Junction” Series Attributes●●●●Memory retaining continuouspolyurethane gasketCaptive stainless steel cover screwsChemically resistant fiberglassreinforced polyesterSubmersible, non corrosive,environmental designSolid FiberglassReinforced PolyesterConstructionStandard Coloris Glacier GraySubmersible“Small Junction” Series Specifications●Corrosion Resistant● Rated Type 1, 3R, 4X, 6P, 12●Water tight●UL/cUL approved●Submersible●CSA approvedLISTEDLISTED●Glacier gray colorThe “Small Junction” Series is Applicable for Many Industries including:Small InstrumentationDesignConveyors and ElevatorsMarine & MarinasRendering Plants
SMALL JUNCTION<strong>SE</strong>RIESThe “Small Junction” Series● Nine sizes of slimline “CF” enclosures● Two sizes of screw cover “F” enclosures● Two configurations(CF, F )
The “Small Junction” SeriesSMALL JUNCTION<strong>SE</strong>RIESIndustry has a continualrequirement for small junctiontype enclosures for housingeverything from terminal blocksto small positional control.<strong>Stahlin</strong> <strong>Enclosures</strong> offers aversatile solution through theuse of two separate enclosurestyles, each maximized foraggressive installations that mayinclude water, steam, vapor orchemicals. The “Small Junction”Series includes a slim line styleand a overhang cover styleconfiguration. Both are madefrom fiberglass reinforced polyester and are functional in installationswhere engineered thermoplastic enclosures are not compatible.The series is particularly useful where slim line mounting is required intight or dense spaces.“Small Junction” Series Ordering InformationUse the information below to derive specific catalog numbers.<strong>Stahlin</strong> catalog numbers first begin with Family ID, then size ID andconfiguration ID as a suffix. See the example below.Ordering Information - Deriving <strong>Catalog</strong> NumbersFamily ID Size ID Configuration ID EXAMPLECF XXXX Conf. ID = “CF832”Available with Factory Installed Mounting Feet Simply Add "MTG" as a Suffix.“Small Junction” Series - Inside DimensionsSize ID H x W x D Optional Panel #CF332 3.13 x 3.03 x 2.70CF532 5.38 x 3.03 x 2.87CF644 6.00 x 3.19 x 3.63CF832 7.82 x 3.03 x 2.87CF844 8.26 x 3.19 x 3.63CF932 8.75 x 3.03 x 2.87CF1144 10.51 x 3.19 x 3.63CF1432 13.19 x 3.03 x 2.87CF1732 16.75 x 3.03 x 2.87F763 6.90 x 5.90 x 2.88 BP76F963 9.15 x 5.90 x 2.88 BP96“Small Junction” Series - ConfigurationsConfigurationIDDESCRIPTIONCF4 cover screws, lift off cover configurationF4 cover screws, lift off cover configuration“Small Junction” Series Shared CharacteristicsConstructionMaterialGasketRecessed ScrewsStainless Steel HardwareOptional Mounting FeetSoft Edge DesignPhysical Characteristics<strong>Non</strong> corrosiveWater-tightDust-tightImpact resistant<strong>Non</strong> ConductiveLight weightUV resistantWorkable materialEasy maintenancePleasing aestheticsColor/FinishIndustry StandardsHot compression molded fiberglassreinforced polyester (thermoset)Poured polyurethane seamlessgasket provides watertight, dust-tightenvironmental sealNo protruding surfaces<strong>300</strong> Series stainless used for coverscrewsEnclosure can be modified with optionalexternal mounting feetRounded edges, minimal protrusions orexposed pocket areas for assembly ofdust and debrisStands up to an exceptionally broadrange of chemical exposuresRated watertight and submersible for aprolonged periodResults in an environmentally sealed,environmentally sound spaceResilient material with high impactresistanceDouble insulated material. No incidentalelectrical contactSolid construction in a lightweightdesignMinimizes the affects of sunlightCuts, drills, punches, and saws withease and accuracyScratches and gouges can be restoredwith a petroleum jelly productSmooth lines, soft colors easily blendinto customer’s design conceptsSmooth surface, no color variations,swirls, or color pockets, no voids.Color described as Glacier GrayUL/cUL 50File E64358Type 1, 3R, 4X, 6P, 12NEMA 250 Type 1, 3R, 4X, 6P, 12CSA Std C22.2File LR069014Type 1, 3R, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VWindow flammability UL94V-0Self extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed inappendix225<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“Small Junction” Series ConfigurationsCF4 cover screws, lift off coverDesign Features● Lift off cover design● Continuous polyurethane cover gasket● Small raised beveled cover.● Recessed captive stainless steel screws● Cover flush with enclosure sides● External mounting feet available as modificationAvailable with Factory Installed Mounting Feet Simply Add "MTG" as a Suffix.SMALL JUNCTION<strong>SE</strong>RIESCF832F4 cover screws, lift off coverDesign Features● Continuous polyurethane door gasket● Lift off cover design● Captive stainless steel screws● Molded in panel mounting inserts● Optional metal back panel availableAvailable with Factory Installed Mounting Feet Simply Add "MTG" as a Suffix.F763<strong>Stahlin</strong> Small Junction Box Applications<strong>Stahlin</strong> CF Series products are ideal for pushbutton mounting and pendent controllers. Sometimes overlooked,however, is this very useful shape for the mounting of series control as shown below in Abita Brewery’sbrewing control. Four functions of the same process are controlled from separate selector switches mountedhorizontally in a single enclosure. The operatorworks from one single position for an efficient useof both time and space. Naturally, thisenvironmentally sealed, Type 4X housing alsoprovides the necessary protection for over-sprayand washdown conditions.A similar installation by Bark Blower, a mulch and shredder machineproducer, uses the CF enclosure for both a key lock and switch mechanismmounted in a safe and functional position but protected from corrosion andthe elements to which it is naturally exposed.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com226
Small JunctionCFTechnical Specifications - “Small Junction” Series“CF” configuration - 4 cover screws, lift off coverCFSMALL JUNCTION<strong>SE</strong>RIESCFConstructionMaterialGasketCover screwsStainless Steel HardwareEnclosure mountingSoft Edge DesignHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealRecessed captive stainless steel screws<strong>300</strong> Series stainless used on all external hardwareOptional mounting feet are available. Consult factoryRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisCF832NOTES:CFIndustry StandardsUL/cUL 50 File E64358 Type 1, 3R, 4X, 6P, 12NEMA 250 Type 1, 3R, 4X, 6P, 12CSA Std 22.2 File LR069014 Type 1, 3R, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VSelf Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixCFAccessoriesMounting FeetMounting feet CFMTGFTKIT pg. 337CFModifications See Special ModRight Modification pg 315 - 322ORDERING INFOMounting feet pg. 337Molded in custom colors pg. 315 - 322Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322227<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“Small Junction” Series “CF” Configuration Technical DrawingsSMALL JUNCTION<strong>SE</strong>RIES“Small Junction” Series <strong>Enclosures</strong> - “CF” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X C I J K L M NENCLOSUREWEIGHT*CF332 3.72 x 3.63 x 2.95 3.13 x 3.03 x 2.70 0 0 2.31 2.75 1.59 2.03 1 lbs.(95 x 92 x 75) (79 x 77 x 69) (0) (0) (59) (70) (40) (52)CF532 5.97 x 3.63 x 3.14 5.38 x 3.03 x 2.87 4.72 2.38 4.56 2.75 3.84 2.03 1 lbs.(152 x 92 x 80) (137 x 77 x 73) (120) (61) (116) (70) (98) (52)CF644 6.63 x 3.81 x 3.89 6.00 x 3.19 x 3.63 5.31 2.50 4.88 2.94 4.13 2.19 2 lbs.(168 x 97 x 99) (153 x 81 x 92) (135) (64) (124) (75) (105) (56)CF832 8.41 x 3.63 x 3.14 7.82 x 3.03 x 2.87 7.16 2.38 7.00 2.75 6.28 2.03 2 lbs.(214 x 92 x 80) (199 x 77 x 73) (182) (60) (178) (70) (160) (52)CF844 8.88 x 3.81 x 3.89 8.26 x 3.19 x 3.63 7.56 2.50 7.13 2.94 6.38 2.19 2 lbs.(225 x 97 x 99) (210 x 81 x 92) (192) (64) (181) (75) (162) (56)CF932 9.35 x 3.63 x 3.14 8.75 x 3.03 x 2.87 8.10 2.38 7.94 2.75 7.22 2.03 2 lbs.(237 x 92 x 80) (222 x 77 x 73) (206) (60) (202) (70) (183) (52)CF1144 11.13 x 3.81 x 3.89 10.51 x 3.19 x 3.63 9.81 2.50 9.37 2.94 8.63 2.19 2 lbs.(283 x 97 x 99) (267 x 81 x 92) (249) (64) (238) (75) (219) (56)CF1432 13.78 x 3.63 x 3.14 13.19 x 3.03 x 2.87 12.53 2.38 12.37 2.75 11.66 2.03 2 lbs.(350 x 92 x 80) (335 x 77 x 73) (318) (60) (314) (70) (296) (52)CF1732 17.35 x 3.63 x 3.14 16.75 x 3.03 x 2.87 16.10 2.38 15.94 2.75 15.22 2.03 3 lbs.(441 x 92 x 80) (426 x 77 x 73) (409) (60) (405) (70) (387) (52)*Flat CoverAll measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com228
Small JunctionFTechnical Specifications - “Small Junction” Series“F” configuration - 4 cover screws, lift off coverFSMALL JUNCTION<strong>SE</strong>RIESFConstructionMaterialGasketCover screwsStainless Steel HardwareEnclosure mountingCover retentionPanel MountingSoft Edge DesignHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealCaptive stainless steel screws<strong>300</strong> Series stainless used on all external hardwareStainless steel beaded cover retention chainRaised bosses with brass inserts accepting 10-32 screws foroptional panel mountingRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisF763NOTES:FIndustry StandardsUL/cUL 50 File E64358 Type 1, 3R, 4X, 6P, 12NEMA 250 Type 1, 3R, 4X, 6P, 12CSA Std 22.2 File LR069014 1, 3R, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VSelf Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixFAccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 330Fiberglass BP__FG pg. 330Stainless Steel BP__SS pg. 330Carbon Steel BP__CS pg. 330Mounting FeetMounting feet CFMTGFTKIT pg. 330FModifications See Special ModRight Modification pg 315 - 322ORDERING INFOMounting feet pg. 337Molded in custom colors pg. 315 - 322Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322229<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“Small Junction” Series “F” Configuration Technical DrawingsBWHAAJMASMALL JUNCTION<strong>SE</strong>RIESB<strong>SE</strong>CTION B-BFLCDEKNB<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVER“Small Junction” Series <strong>Enclosures</strong> - “F” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M NENCLOSUREWEIGHTPANELNUMBER*F 763 7.63 x 6.63 x 3.19 6.90 x 5.90 x 2.88 5.37 x 5.63 2.48 5.37 4.25 4.52 4.9 3 lbs. BP76(194 x 168 x 81) (175 x 150 x 73) (137 x 143) (63) (137) (108) (115) (124)F 963 9.87 x 6.63 x 3.19 9.15 x 5.90 x 2.88 7.62 x 5.63 2.48 7.62 4.25 6.77 4.9 3 lbs. BP96(251 x 168 x 81) (232 x 150 x 73) (194 x 143) (63) (194) (108) (172) (124)All measures are in inches, items in parentheses are in millimeters.*Panel ordered separately<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com230
“NewSentry © ” PVC <strong>Enclosures</strong>PVCNEW<strong>SE</strong>NTRY<strong>SE</strong>RIESThe “NewSentry © ” PVC <strong>Enclosures</strong>The “NewSentry” Series is a range of corrosion resistant, watertight PVC enclosures featuring ten sizes of simple screwdown covers. The enclosures are a perfect complement to fiberglass products when used as junction boxes and smallauxiliary enclosures.Each enclosure is assembled with a PVC gasket that ensures compatibility with the enclosure’s substrate and, throughcellular resiliency in stretching and compressing, enables longevity in the interaction between cover and gasket spanning a widepotential temperature range.Mounting feet are integral on smaller sizes and included as addon’swith all larger enclosures. Captive brass cover screwsmeet threaded brass inserts to secure covers and provideassurance against wear and tear from repeated use.Rigid PVC Construction“NewSentry © ” series enclosures are designedfor general electrical and electronic applicationsand any application that has associatedenvironmental concerns.Featured Highlights“NewSentry” “NewSentry © ” Series Attributes●Memory retaining continuous PVC gasketMemory RetainingContinuous PVCGasket●●●●Threaded inserts and captive brasscover screwsCorrosion resistant PVC materialMolded in or add on mounting feetAvailable in ten classic sizes“NewSentry © ” Series SpecificationsCaptive BrassCover Screws●Corrosion Resistant● Rated type 1, 2, 3, 4, 4X, 12, 13●Water tight●UL/cUL approved●CSA approvedLISTEDLISTEDThe “NewSentry © ” Series is Applicable for Many Industries including:Standard Junction BoxConveyors and ElevatorsMarine and MarinasWaste Water &Processing
NEW<strong>SE</strong>NTRY<strong>SE</strong>RIES“NewSentry © ” Series● Ten sizes of PVC enclosures● (J_PVC)
NewSentry ®SeriesPVCNEW<strong>SE</strong>NTRY<strong>SE</strong>RIESNewSentry PVC enclosures areclassic junction box enclosuresdesigned to terminate long wireruns or to house terminal blocks.<strong>Stahlin</strong> NewSentry enclosures offera versatile solution through the useof this corrosion resistant,waterproof design making it ideal foragricultural applications, marinas, water treatment plants, car washesand residential applications.The "PVC" Series consists of ten square shapes that offer both shallowand deep dimensions. The series is particularly useful where only tightor dense spaces are available.NewSentry Ordering InformationUse the information below to derive specific catalog numbers. <strong>Stahlin</strong>catalog numbers first begin with Family ID, then size ID and configurationID as a suffix. See the example below.Ordering Information - Deriving <strong>Catalog</strong> NumbersFamily ID Size ID Configuration ID EXAMPLEJ 442 PVC “J442PVC”“NewSentry” Series - ConfigurationsConfigurationIDDESCRIPTIONPVC4 cover screws, lift off cover configuration“NewSentry” Series - Inside DimensionsSize IDH x W x D442 4 x 4 x 2444 4 x 4 x 4446 4 x 4 x 6552 5 x 5 x 2664 6 x 6 x 4666 6 x 6 x 6884 8 x 8 x 4887 8 x 8 x 712124 12 x 12 x 412126 12 x 12 x 6“NewSentry” Series Shared CharacteristicsConstructionMaterialGasketBrass ScrewsMounting FeetSoft Edge DesignPhysical Characteristics<strong>Non</strong> corrosiveWater-tightImpact resistant<strong>Non</strong> ConductiveLight weightWorkable materialColor/FinishIndustry StandardsPolyvinyl chloride (PVC)PVC seamless gasket provides watertight,dust-tight environmental sealScrew down to brass insertsBuilt in on designated models. Add onfeet available for other modelsRounded edges, minimal protrusions orexposed pocket areas for assembly ofdust and debrisStands up to an exceptionally broadrange of chemical exposuresRated watertightResilient material with excellent highimpact resistanceDouble insulated material. No incidentalelectrical contactSolid construction in a lightweightdesignCuts, drills, punches, and saws withease and accuracyAttractive light grey finishUL/cUL 514B Fittings, File E190961514C Boxes Type 1, 2, 3, 4, 4X, 12, 13NEMA 250 Type 1, 2, 3, 4, 4X, 12, 13CSA Std C22.2 No. 85 File 207025Type 1, 2, 3, 4, 4X, 12, 13Temperature Range (-4°F to +140°F) (-20°C to +60°C)Flammability Rating UL94V-0Self extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed inappendix233<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“NewSentry” Series ConfigurationsPVC4 cover screws, lift off coverDesign Features● Lift off cover design● PVC door gasket● Captive brass cover screws● Brass inserts for all screws● Modest overhang cover design● Integral mounting feet available on some models● Add on mounting feet for larger sizesNEW<strong>SE</strong>NTRY<strong>SE</strong>RIESNewSentry FamilyNewSentry CouplingJCOUP FamilyNewSentryJ442PVCNewSentry AdapterJADAPT FamilyNewSentry Terminal AdapterJTADAPT FamilyNewSentryJ664PVC<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com234
Technical Specifications - NewSentry ® SeriesPVC“PVC” configuration - 4 cover screws, lift off coverPVCPVC ConstructionMaterialGasketCover screwsEnclosure MountingSoft Edge DesignPolyvinyl chloride (PVC)PVC seamless gasket provides watertight, dust-tightenvironmental sealCaptive brass cover screwsIntegral on smaller sizes, included as add-on feet for larger sizesRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisNEW<strong>SE</strong>NTRY<strong>SE</strong>RIESNOTES:J664PVCPVCIndustry StandardsUL/cUL 514B, 514C File E190961 Type 1, 2, 3, 4, 4X, 12, 13NEMA 250 Type 1, 2, 3, 4, 4X, 12, 13CSA Std C22.2 File 207025 Type 1, 2, 3, 4, 4X, 12, 13Temperature Range (-4°F to +140°F) (-20°C to +60°C)Flammability Rating UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixPVCModifications See Special ModRight Modification pg 315 - 322ORDERING INFOCustom painting pg 315 - 322Silk screening pg 315 - 322Decals pg 315 - 322Custom cutouts pg 315 - 322Custom hole drilling pg 315 - 322NewSentry PVC AdapterJADAPT20PVCNewSentry PVC CouplingJCOUP20PVCNewSentry PVC Terminal AdapterJTADAPT20PVC235<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“NewSentry” Series “PVC” Configuration Technical DrawingsPVCPVC BoxesPVCPVC AdaptersPVCTA (MALE ADAPTERS)SIZE WITHCOVER STAHLIN #4x4x2J442PVC4x4x4J444PVC4x4x6J446PVC5x5x2J552PVC6x6x4J664PVC6x6x6J666PVC8x8x4J884PVC8x8x7J887PVC12x12x4J12124PVC12x12x6J12126PVCPVCSIZE STAHLIN #1/2" JADAPT10PVC3/4" JADAPT15PVC1" JADAPT20PVC1 1/4" JADAPT25PVC1 1/2" JADAPT30PVC2" JADAPT35PVCPVC CouplingsSIZE STAHLIN #1/2" JCOUP10PVC3/4" JCOUP15PVC1" JCOUP20PVC1 1/4" JCOUP25PVC1 1/2" JCOUP30PVC2" JCOUP35PVCSIZE STAHLIN #1/2" JTADAPT10PVC3/4" JTADAPT15PVC1" JTADAPT20PVC1 1/4" JTADAPT25PVC1 1/2" JTADAPT30PVC2" JTADAPT35PVCNEW<strong>SE</strong>NTRY<strong>SE</strong>RIESPVC NewSentry Series <strong>Enclosures</strong>SIZE IDNUMBEROVERALLH X W X DINSIDEA X B X C K L FJ442PVC* 4.03 x 4.03 x 2.42 3.66 x 3.66 x 2.00 4.63 N/A 8-32(102 x 102 x 61) (93 x 93 x 51) (118)J444PVC 4.04 x 4.04 x 4.50 3.60 x 3.60 x 4.02 5.64 N/A 8-32(103 x 103 x 114) (91 x 91 x 102) (143)J446PVC 4.02 x 4.02 x 6.58 3.59 x 3.59 x 6.02 5.49 N/A 8-32(102 x 102 x 167) (91 x 91 x 153) (139)J552PVC* 5.00 x 5.00 x 2.33 4.61 x 4.61 x 1.85 5.66 N/A 8-32(127 x 127 x 59) (117 x 117 x 47) (144)J664PVC 6.85 x 6.85 x 4.57 5.96 x 5.96 x 4.03 7.94 7.94 10.-32(174 x 174 x 116) (151 x 151 x 102) (202) (202)J666PVC 6.85 x 6.85 x 6.58 5.92 x 5.92 x 6.04 7.96 7.96 10-32(174 x 174 x 167) (150 x 150 x 153) (202) (202)J884PVC 8.96 x 8.96 x 4.62 8.05 x 8.05 x 4.06 10.49 10.49 1/4-20(228 x 228 x 117) (204 x 204 x 103) (266) (266)J887PVC 9.15 x 9.15 x 7.65 8.02 x 8.02 x 7.06 10.49 10.49 1/4-20(232 x 232 x 195) (204 x 204 x 179) (266) (266)J12124PVC 12.94 x 12.94 x 4.70 11.92 x 11.92 x 4.00 14.46 14.46 1/4-20(329 x 329 x 119) (303 x 303 x 102) (367) (367)J12126PVC 12.94 x 12.94 x 6.64 11.91 x 11.91 x 6.00 14.46 14.46 1/4-20(329 x 329 x 169) (303 x 303 x 152) (367) (367)All measures are in inches, items in parentheses are in millimeters.• Nylon & stainless screws available by special order.• Supplied with threaded brass inserts and screws.• PVC Gasketing and mounting feet.• F = Threaded brass insert size.* Denotes molded in mounting feet.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com236
The “Pushbutton” SeriesPUSHBUTTON<strong>SE</strong>RIESThe “Pushbutton” SeriesThe “Pushbutton” Series includes two separate enclosure designs, an in-line style and a multi-hole style configuration. Bothare designed from fiberglass reinforced polyester and feature a continuous polyurethane gasket that provides a completeenvironmental seal. This unique series will house pushbuttons, switches and pilot lights in both 30mm and 22mm configurations.A full metal grounding strap is furnished with each configuration for ease of bonding.Designed as a true pushbutton station, the in-line enclosure does not offer a provision for panel mounting. If panel mountingis required, the preferred enclosure would be the multi-hole pushbutton. Unobstructed side-walls, captive stainless steel coverscrews and a full range of sizes makes this a most versatile offering.The alternate configuration is the multi-hole design which has aintegral flange mount and back panel capabilities. This series isideal for high density pushbutton mounting and canaccommodate up to twenty five operators on a single cover.“Pushbutton” series enclosures are designed forgeneral electrical and electronic applications and anyapplication that has associated environmentalconcerns. Custom hole configurations are availableupon request. Please consult factory.Featured Highlights“Pushbutton” Captive StainlessSteel Cover ScrewsMemory Retaining ContinuousPolyurethane Gasket“Pushbutton” Series Attributes● Flush cover design● Memory retaining continuous polyurethanegasket● Captive stainless steel cover screws● Full metal grounding strap● Notched key hole design● Chemically resistant fiberglass reinforced polyester● Submersible, non corrosive, environmental design● Available in 30mm and 22mm configurationsSolid FiberglassReinforced PolyesterConstructionStandard Coloris Glacier GrayNotched Keyholes“Pushbutton” Series Specifications●Corrosion Resistant●Glacier gray color●Water tight● Rated Type 1, 3, 4X,●UL/cUL approved●Submersible6P, 12●CSA approvedLISTEDLISTEDThe “Pushbutton” Series is Applicable for Many Industries including:OEM &instrumentation designsConveyors and ElevatorsWater &Wastewater ProcessingChemicalProcessing Plants
PUSHBUTTON<strong>SE</strong>RIESThe “Pushbutton” Series● Seven basic sizes of inline pushbutton● Five basic sizes of Multi-hole pushbutton● Three configurations(CF, CF-22, F )
The “Pushbutton” SeriesPUSHBUTTON<strong>SE</strong>RIES“Pushbutton” Series Ordering InformationUse the information below to derive specific catalog numbers. <strong>Stahlin</strong>catalog numbers first begin with Family ID, then size ID and configurationID as a suffix. See the example below.Ordering Information - Deriving <strong>Catalog</strong> NumbersFamily ID Size ID Configuration ID EXAMPLECF XXXX Conf. ID = “CF4PB”Available with Factory Installed Mounting Feet Simply Add "MTG" as a Suffix.“Pushbutton” Series - ConfigurationsPushbutton mounting in corrosiveenvironments is always difficult toaccomplish. <strong>Stahlin</strong> enclosuresoffers a versatile solution throughthe use of two separateenclosure styles, eachmaximized for aggressiveinstallations that may includewater, steam, vapor orchemicals. The “Pushbutton”Series includes an in-line styleand a multi-hole style configuration.ConfigurationIDDESCRIPTIONCF4 cover screws, lift off cover 30mm configurationCF4 cover screws, lift off cover 22mm configurationF4 cover screws, lift off cover 30mm configuration“Pushbutton” Series - Inside DimensionsSize ID H x W x D PB Size No. HolesCF1PB 6.00 x 3.19 x 3.63 30mm 1CF2PB 6.00 x 3.19 x 3.63 30mm 2CF3PB 8.26 x 3.19 x 3.63 30mm 3CF4PB 10.51 x 3.19 x 3.63 30mm 4CF5PB 13.19 x 3.03 x 2.87 30mm 5CF6PB 16.75 x 3.03 x 2.87 30mm 6CF7PB 16.75 x 3.03 x 2.87 30mm 7CF1PB-22 6.00 x 3.19 x 3.63 22mm 1CF2PB-22 6.00 x 3.19 x 3.63 22mm 2CF3PB-22 6.00 x 3.19 x 3.63 22mm 3CF4PB-22 8.26 x 3.19 x 3.63 22mm 4CF5PB-22 10.51 x 3.19 x 3.63 22mm 5CF6PB-22 10.51 x 3.19 x 3.63 22mm 6CF7PB-22 13.19 x 3.03 x 2.87 22mm 7F4PBW 5.72 x 5.72 x 4.45 30mm 4F6PBW 7.73 x 5.74 x 4.45 30mm 6F9PBW 9.73 x 7.73 x 3.98 30mm 9F12PBW 9.73 x 7.73 x 3.98 30mm 12F16PBW 11.79 x 9.80 x 4.94 30mm 16F20PBW 11.79 x 9.80 x 4.94 30mm 20F25PBW 13.53 x 11.55 x 5.94 30mm 25“Pushbutton” Series Shared CharacteristicsConstructionMaterialGasketRecessed ScrewsNotched Key HoleStainless Steel HardwareSoft Edge DesignPhysical Characteristics<strong>Non</strong> corrosiveWater-tightDust-tightImpact resistant<strong>Non</strong> ConductiveLight weightUV resistantWorkable materialEasy maintenancePleasing aestheticsColor/FinishIndustry StandardsHot compression molded fiberglassreinforced polyester (thermoset)Poured polyurethane seamlessgasket provides watertight, dust-tightenvironmental sealNo protruding surfacesSecure mounting of pushbutton in nonrotatablehole<strong>300</strong> Series stainless used for coverscrewsRounded edges, minimal protrusions orexposed pocket areas for assembly ofdust and debrisStands up to an exceptionally broadrange of chemical exposuresRated watertight and submersible for aprolonged periodResults in an environmentally sealed,environmentally sound spaceResilient material with high impactresistanceDouble insulated material. No incidentalelectrical contactSolid construction in a lightweightdesignMinimizes the affects of sunlightCuts, drills, punches, and saws withease and accuracyScratches and gouges can be restoredwith a petroleum jelly productSmooth lines, soft colors easily blendinto customer’s design conceptsSmooth surface, no color variations,swirls, or color pockets, no voids.Color described as Glacier GrayUL/cUL 50File E64358Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std 22.2File LR069014Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VSelf extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed inappendix239<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“Pushbutton” Series Configurationscontinued on following pagesCF4 cover screws, lift off cover with 30mm holesDesign Features● Seven pushbutton layouts are available 1-7 holes● Lift off cover design● Recessed captive stainless steel screws● Notched key hole design● Metal grounding strap furnished● External mounting feet availableAvailable with Factory Installed Mounting Feet Simply Add "MTG" as a Suffix.CF4PBCF 4 cover screws, lift off cover with 22mm holesDesign Features● Seven pushbutton arrangements are available 1-7 holes● Lift off cover design● Recessed captive stainless steel screws● Notched key hole design● Metal grounding strap furnished● Sleek unobstructed sidewall designPUSHBUTTON<strong>SE</strong>RIESAvailable with Factory Installed Mounting Feet Simply Add "MTG" as a Suffix.CF7PB-22F4 cover screws, lift off cover with 30mm holesDesign Features● 15 pushbutton arrangements are available 1-15 holes● Lift off cover design● Stainless steel beaded cover retention chain● Notched keyhole design● Metal grounding strap furnished● 22 mm holes also available as modificationAvailable with Factory Installed Mounting Feet Simply Add "MTG" as a Suffix.F12PBW<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com240
Push ButtonCFTechnical Specifications - “Pushbutton” Series“CF” configuration - 4 cover screws, lift off cover 30mmCFCFConstructionMaterialGasketCover screwsStainless Steel HardwareEnclosure mountingSoft Edge DesignHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealRecessed captive stainless steel screws<strong>300</strong> Series stainless used on all external hardwareOptional mounting feet are available. Consult factoryRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisPUSHBUTTON<strong>SE</strong>RIESCF4PBNOTES:CFIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VSelf Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixCFModifications See Special ModRight Modification pg. 315 - 322ORDERING INFOMounting feet pg. 337Molded in custom colors pg. 315 - 322Custom painting pg. 315 - 322Silk screening pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322241<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“Pushbutton” Series “30mm In-Line” Configuration Technical DrawingsWJBO2.25(57)CHIAAMA2.25(57)A.190(5)B<strong>SE</strong>CTION B-BL1.210(31).672(17)PUSHBUTTON<strong>SE</strong>RIESDKNB<strong>SE</strong>CTION A-A.190(5)FRONT VIEW“Pushbutton” Series <strong>Enclosures</strong> - “30mm In-Line” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X C I J K L M N OENCLOSUREWEIGHTCF1PB 6.63 x 3.81 x 3.89 6.00 x 3.19 x 3.63 5.31 2.5 4.88 2.94 4.13 2.19 3.31 2 lbs.(168 x 97 x 99) (153 x 81 x 92) (135) (64) (124) (75) (105) (56) (84)CF2PB 6.63 x 3.81 x 3.89 6.00 x 3.19 x 3.63 5.31 2.5 4.88 2.94 4.13 2.19 2.19 2 lbs.(168 x 97 x 99) (153 x 81 x 92) (135) (64) (124) (75) (105) (56) (56)CF3PB 8.88 x 3.81 x 3.89 8.26 x 3.19 x 3.63 7.56 2.5 7.13 2.94 6.38 2.19 2.19 2 lbs.(225 x 97 x 99) (210 x 81 x 92) (192) (64) (181) (75) (162) (56) (56)CF4PB 11.13 x 3.81 x 3.89 10.51 x 3.19 x 3.63 9.81 2.5 9.37 2.94 8.63 2.19 2.19 2 lbs.(283 x 97 x 99) (267 x 81 x 92) (249) (64) (238) (75) (219) (56) (56)CF5PB 13.78 x 3.63 x 3.14 13.19 x 3.03 x 2.87 12.53 2.38 12.37 2.75 11.66 2.03 2.39 2 lbs.(350 x 92 x 80) (335 x 77 x 73) (318) (60) (314) (70) (296) (52) (61)CF6PB 17.35 x 3.63 x 3.14 16.75 x 3.03 x 2.87 16.1 2.38 15.94 2.75 15.22 2.03 3.05 3 lbs.(441 x 92 x 80) (426 x 77 x 73) (409) (60) (405) (70) (387) (52) (77)CF7PB 17.35 x 3.63 x 3.14 16.75 x 3.03 x 2.87 16.1 2.38 15.94 2.75 15.22 2.03 1.92 3 lbs.(441 x 92 x 80) (426 x 77 x 73) (409) (60) (405) (70) (387) (52) (49)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com242
Push ButtonCFTechnical Specifications - “Pushbutton” Series“CF” configuration - 4 cover screws, lift off cover 22mmCFCFConstructionMaterialGasketCover screwsStainless Steel HardwareEnclosure mountingSoft Edge DesignHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealRecessed captive stainless steel screws<strong>300</strong> Series stainless used on all external hardwareOptional mounting feet are available. Consult factoryRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisCFIndustry StandardsPUSHBUTTON<strong>SE</strong>RIESNOTES:CF7PB-22UL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VSelf Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixCFModifications See Special ModRight Modification pg. 315 - 322ORDERING INFOMounting feet pg. 337Molded in custom colors pg. 315 - 322Custom painting pg. 315 - 322Silk screening pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322243<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“Pushbutton” Series “22mm In-Line” Configuration Technical DrawingsWJBOC1.56(40)MAHI1.56(40)AA1.56(40)<strong>SE</strong>CTION B-BBLPUSHBUTTON<strong>SE</strong>RIESD.125(3)KN.875(22).468(12)B<strong>SE</strong>CTION A-AFRONT VIEWWITHOUT COVER“Pushbutton” Series <strong>Enclosures</strong> - “22mm In-Line” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X C I J K L M N OENCLOSUREWEIGHTCF1PB-22 6.63 x 3.81 x 3.89 6.00 x 3.19 x 3.63 5.31 2.5 4.88 2.94 4.13 2.19 3.31 2 lbs.(168 x 97 x 99) (153 x 81 x 92) (135) (64) (124) (75) (105) (56) (84)CF2PB-22 6.63 x 3.81 x 3.89 6.00 x 3.19 x 3.63 5.31 2.5 4.88 2.94 4.13 2.19 2.53 2 lbs.(168 x 97 x 99) (153 x 81 x 92) (135) (64) (124) (75) (105) (56) (64)CF3PB-22 6.63 x 3.81 x 3.89 6.00 x 3.19 x 3.63 5.31 2.5 4.88 2.94 4.13 2.19 1.75 2 lbs.(168 x 97 x 99) (153 x 81 x 92) (135) (64) (124) (75) (105) (56) (44)CF4PB-22 8.88 x 3.81 x 3.89 8.26 x 3.19 x 3.63 7.56 2.5 7.13 2.94 6.38 2.19 2.09 2 lbs.(225 x 97 x 99) (210 x 81 x 92) (192) (64) (181) (75) (162) (56) (53)CF5PB-22 11.13 x 3.81 x 3.89 10.51 x 3.19 x 3.63 9.81 2.5 9.37 2.94 8.63 2.19 2.44 2 lbs.(283 x 97 x 99) (267 x 81 x 92) (249) (64) (238) (75) (219) (56) (62)CF6PB-22 11.13 x 3.81 x 3.89 10.51 x 3.19 x 3.63 9.81 2.5 9.37 2.94 8.63 2.19 1.66 3 lbs.(283 x 97 x 99) (267 x 81 x 92) (249) (64) (238) (75) (219) (56) (42)CF7PB-22 13.78 x 3.63 x 3.14 13.19 x 3.03 x 2.87 12.53 2.38 12.37 2.75 11.66 2.03 2.2 3 lbs.(350 x 92 x 80) (335 x 77 x 73) (318) (60) (314) (70) (296) (52) (56)All measures are in inches, items in parenthesis are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com244
Push ButtonFTechnical Specifications - “Pushbutton” Series“F” configuration - 4 cover screws, lift off cover 30mmFFConstructionMaterialGasketCover screwsStainless Steel HardwareEnclosure mountingCover retentionPanel MountingSoft Edge DesignHot compression molded fiberglass reinforced polyester (thermoset)Poured polyurethane seamless gasket provides watertight,dust-tight environmental sealRecessed captive stainless steel screws<strong>300</strong> Series stainless used on all external hardwareIntegral mounting flange for ease of mountingStainless steel beaded cover retention chainRaised bosses with brass inserts accepting 10-32 screws foroptional panel mountingRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisPUSHBUTTON<strong>SE</strong>RIESNOTES:F12PBWFIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 4X, 6P, 12NEMA 250 Type 1, 3, 4X, 6P, 12CSA Std C22.2 File LR069014 Type 1, 3, 4X, 6P, 12Temperature Range (-40°F to +250°F) (-40°C to +120°C)Flammability Rating UL94-5VSelf Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixFModifications See Special ModRight Modification pg. 315 - 322ORDERING INFOMounting feet pg. 337Molded in custom colors pg. 315 - 322Custom painting pg. 315 - 322Silk screening pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322245<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“Pushbutton” Series “Multi-Hole” Configuration Technical DrawingsWBFHOLE DIA.4 PLC'S.O2.25 (57)CNAKEHAAPB2.25(57)<strong>SE</strong>CTION B-BMPUSHBUTTON<strong>SE</strong>RIES.190(5)JDB1.210(31).672(17)L<strong>SE</strong>CTION A-A“Pushbutton” Series <strong>Enclosures</strong> - “Multi-Hole” Configuration DimensionsCATALOGNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K L M N O PHOLEDIA.ENCL.WT.PANELNUMBERF4PBW 7.50 x 7.50 x 4.75 5.72 x 5.72 x 4.45 6.75 x 4 4 4.25 4.25 0.25 7.52 2.64 2.64 0.31 2.75 lbs. BP-66(191 x 191 x 121) (145 x 145 x 113) (171 x 101) (101) (108) (108) (6) (191) (67) (67) (8)F6PBW 9.62 x 7.50 x 4.74 7.73 x 5.74 x 4.45 8.88 x 4 4 6.25 4.25 0.25 9.5 2.64 2.51 0.31 3.5 lbs. BP-86(244 x 191 x 121) (196 x 146 x 113) (225 x 101) (101) (159) (108) (6) (242) (67) (64) (8)F9PBW 11.62 x 9.41 x 4.25 9.73 x 7.73 x 3.98 10.75 x 6 3.5 8.25 6.25 0.25 11.35 3.43 2.45 0.31 5 lbs. BP-108(295 x 239 x 108) (247 x 196 x 101) (273 x 152) (89) (209) (159) (6) (288) (87) (62) (8)F12PBW 11.62 x 9.41 x 4.25 9.73 x 7.73 x 3.98 10.75 x 6 3.5 8.25 6.25 0.25 11.35 2.3 2.45 0.31 5 lbs. BP-108(295 x 239 x 108) (247 x 196 x 101) (273 x 152) (89) (209) (159) (6) (288) (58) (62) (8)F16PBW 13.56 x 11.43 x 5.21 11.79 x 9.80 x 4.94 12.75 x 8 4.5 10.25 8.25 0.25 13.41 3.33 2.3 0.31 6.5 lbs. BP-1210(344 x 291 x 132) (299 x 249 x 125) (324 x 203) (114) (260) (209) (6) (341) (85) (58) (8)F20PBW 13.56 x 11.43 x 5.21 11.79 x 9.80 x 4.94 12.75 x 8 4.5 10.25 8.25 0.25 13.41 2.2 2.1 0.31 6.5 lbs. BP-1210(344 x 291 x 132) (299 x 249 x 125) (324 x 203) (114) (260) (209) (6) (341) (56) (53) (8)F25PBW 15.50 x 13.50 x 6.25 13.53 x 11.55 x 5.94 14.62 x 10 5.37 12.25 10.25 0.25 15.47 3.24 2.25 0.31 8.5 lbs. BP-1412(394 x 343 x 159) (344 x 293 x 151) (371 x 254) (137) (311) (260) (6) (393) (82) (57) (8)All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com246
Control <strong>Enclosures</strong>Control <strong>Enclosures</strong><strong>Stahlin</strong>’s Control <strong>Enclosures</strong> are designed to accommodate electrical, electronic, instrumentation and mechanical controlsindoors and outdoors where corrosion resistant watertight enclosures are needed to provide protection against windblown dustand rain, splashing and hose directed water. The "N" designation reflects a NEMA range series of large capacity enclosures.With the ample working space involved, this wall mount configuration, or alternate free standing enclosure style will alsoaccommodate combination hydraulic or pneumatic controls along with thesupporting electrical control. Fiberglass reinforced polyester supportsa very high temperature range when used in oil field, mining, oilplatform and general processing controls. Yet, the pleasingcosmetic construction is ideally suited for ordinary indoorFeatured HighlightsSeries N IntegralMounting FeetCONTROLENCLOSURESor outdoor industrial control mounting.Control <strong>Enclosures</strong> Attributes●●●●●●●●Fiberglass reinforced polyester materialMemory retaining polyurethane gasketStainless steel full length continuous hinge<strong>300</strong> series stainless steel hardwareIntegral mounting feetMolded in panel mounting inserts or studsHigh temperature, non corrosive,environmental designsWall mount or free standing configurationsFull LengthStainless SteelHingePolyurethaneDoor GasketVersatile PanelMountingPadlockHaspControl <strong>Enclosures</strong> Specifications●Water tight or rain tight● Rated Type 1, 3, 3R, 4X, 12●Fire resistantas determined by typeas designated●Light weight●Corrosion Resistant●UL/cUL/CSA approvedLISTEDLISTEDControl <strong>Enclosures</strong> are Applicable for Many Industries including:MRO FacilitiesSCADA SystemsWater &Wastewater ProcessingPump Control Systems
CONTROLENCLOSURESControl Enclosure Series● Seventy three basic sizes● 5 major categories● Double door configuration available onselect sizes● Wall mount or free standing
Control <strong>Enclosures</strong> Type 4XNLarge control enclosures are usedin a variety of applications involvingdiverse environmentalconditions. Type 4X productis designed to meet therigorous demands of indoorand outdoor applications.Control series enclosuresare a natural choice forprocess control wheremoisture or chemicalenvironments require uniqueprotection. <strong>Stahlin</strong>’s control seriesenclosures maintain a watertight, corrosionresistant protection against a range of chemicals, windblown dust, rain,sleet and external ice formation.Control <strong>Enclosures</strong> Type 4X Shared CharacteristicsConstructionMaterialGasketStainless Steel HardwareTwistlock LatchesMounting BossesMetal InsertsIntegral Mounting FeetFiberglass HingesRigid Side WallsLight Gray ColorColor/FinishHot compression molded fiberglassreinforced polyester, hand layup FRPPoured polyurethane seamlessgasket provides watertight, dust-tightenvironmental seal(or urethane strip gasket)<strong>300</strong> Series stainless used on all hardwareEase of entry into enclosurePanel mounting capability for fixedrear panelAll bosses utilize threaded brass insertsor stainless steel studsEase of installation on all wall mountproductsAlternate style non metallic hinges availableExcellent mechanical strength forcomponent mountingPleasing aesthetics for any applicationSmooth surface, no color variations,swirls, or color pockets, no voids.CONTROLENCLOSURESOrdering Information - Deriving <strong>Catalog</strong> NumbersFamily ID Size ID Depth ID Configuration ID EXAMPLEN 1610 * HWT “N16107HWT”* Depth is offered in various increments. See following charts for exact sizes.Control <strong>Enclosures</strong> Type 4X - Inside DimensionsSize ID H x W x D Optional Panel #N1610 16 x 10 x various BP1610N2016 20 x 16 x various BP2016N2020 20 x 20 x various BP2020N2412 24 x 12 x various BP2412N2420 24 x 20 x various BP2420N2424 24 x 24 x various BP2424N3020 30 x 20 x various BP3020N3024 30 x 24 x various BP3024N3630 36 x 30 x various BP3630N3636 36 x 36 x various BP36368Optional back panels available in various materials. See page 331Physical Characteristics<strong>Non</strong> corrosiveWater-tightDust-tightImpact resistant<strong>Non</strong> ConductiveLight weightUV resistantWorkable materialEasy maintenancePleasing aestheticsIndustry StandardsStands up to an exceptionally broadrange of chemical exposuresAs designated on Type 4X enclosuresResults in an environmentally sealed,environmentally sound spaceResilient material with high impactresistanceDouble insulated material. No incidentalelectrical contactSolid construction in a lightweightdesignMinimizes the affects of sunlightCuts, drills, punches, and saws withease and accuracyScratches and gouges can be restoredwith a petroleum jelly productSmooth lines, soft colors easily blendinto customer’s design conceptsControl <strong>Enclosures</strong> Type 4X - ConfigurationsConfigurationIDDESCRIPTIONWTLatched down cover onlyHWTStainless steel hinged, latched down coverFHLWT Fiberglass hinged, through the door latchesUL/cUL 50NEMA 250CSA Std C22.2Temperature RangeFlammability RatingWindow flammabilitySelf extinguishingChemical ResistanceFile E64358Type 1, 3, 3R, 4X, 12 as designatedType 1, 3, 3R, 4X, 12 as designatedFile LR069014Type 1, 3, 3R, 4X, 12 as designated(-40°F to +250°F) (-40°C to +130°C)UL94-5VUL94V-0<strong>Non</strong>-flame propagatingFull chemical resistance charts listed inappendix249<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“Control <strong>Enclosures</strong> Type 4X” ConfigurationsWTLatched down cover onlyDesign Features● Rigid body construction and watertight seal● Memory retaining polyurethane gasketing● Integral mounting feet for ease of installation● Molded in panel mounting inserts● Special panel configurations availableincluding dead front panels● Built in padlock haspN20168WTHWTStainless steel hinged, latched down coverDesign Features● Rigid body construction and watertight seal● Memory retaining polyurethane gasketing● Integral mounting feet for ease of installation● Molded in panel mounting inserts● Special panel configurations availableincluding dead front panels● Built in padlock haspCONTROLENCLOSURESN24208HWTFHLWTFiberglass hinged, through the door latchesDesign Features● Rigid body construction and watertight seal● Memory retaining polyurethane gasketing● Integral mounting feet for ease of installation● Molded in panel mounting inserts● Special panel configurations available includingdead front panels● Built in padlock haspN20168FHLWT<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com250
WTTechnical Specifications - Control <strong>Enclosures</strong> Type 4X“WT” configuration - Latched down coverNWT ConstructionMaterialGasketStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyester,hand layup FRPPoured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisN20168WTNOTES:WTIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 3R, 4X, 12NEMA 250 Type 1, 3, 3R, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 3R, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixCONTROLENCLOSURESWT AccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 331Carbon Steel BP__CS pg. 331Fiberglass BP__FG pg. 331Stainless Steel BP__SS pg. 331Special AccessoriesVent pg. 323Louver pg. 325Assorted hubs and cord grips pg. 327, 328Vapor capsule pg. 326WTModifications See Special ModRight Modification pg 315 - 322ORDERING INFODoor brace pg. 336Grounding studs pg. 339Removable dead front panels pg. 333Molded in color pg. 315 - 322Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom windows pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322251<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Control <strong>Enclosures</strong> Type 4X “WT” Configuration Technical ChartsControl <strong>Enclosures</strong> Type 4X - “WT” Configuration DimensionsCATALOGNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K LENCLOSURE OPENINGM X NENCLOSUREWEIGHTPANELNUMBERN16107WT 18.75 x 10.96 x 9.03 15.92 x 10.27 x 8.53 17.50 x 7.00 7.8 12 7.5 13.14 x 6.00 12 lbs. BP-1610(476 x 278 x 229) (404 x 261 x 217) (444 x 178) (198) (305) (191) (334 x 152)N20166WT 22.75 x 16.87 x 7.77 19.70 x 16.04 x 7.24 21.50 x 10.12 6.26 15.25 11.25 16.75 x 12.19 17 lbs. BP-2016(578 x 429 x 197) (500 x 407 x 184) (546 x 257) (159) (387) (286) (425 x 310)N20168WT 22.75 x 16.87 x 9.77 19.70 x 16.04 x 9.24 21.50 x 10.12 8.26 15.25 11.25 16.75 x 12.19 22 lbs. BP-2016(578 x 429 x 248) (500 x 407 x 235) (546 x 257) (210) (387) (286) (425 x 310)N201610WT 22.75 x 16.87 x 11.77 19.70 x 16.04 x 11.24 21.50 x 10.12 10.26 15.25 11.25 16.75 x 12.19 23 lbs. BP-2016(578 x 429 x 299) (500 x 407 x 286) (546 x 257) (261) (387) (286) (425 x 310)N201611WT* 22.75 x 16.87 x 12.77 19.70 x 16.04 x 12.26 21.50 x 10.12 11.26 15.25 11.25 16.75 x 12.19 23 lbs. BP-2016(578 x 429 x 324 (500 x 407 x 311) (546 x 257) (286) (387) (286) (425 x 310)N201612WT 22.75 x 16.87 x 13.77 19.70 x 16.04 x 13.24 21.50 x 10.12 12.26 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 350) (500 x 407 x 336) (546 x 257) (312) (387) (286) (425 x 310)N201613WT* 22.75 x 16.87 x 14.52 19.70 x 16.04 x 13.99 21.50 x 10.12 13.01 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 369) (500 x 407 x 355) (546 x 257) (331) (387) (286) (425 x 310)N201614WT* 22.75 x 16.87 x 15.52 19.70 x 16.04 x 14.99 21.50 x 10.12 14.01 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 394) (500 x 407 x 381) (546 x 257) (356) (387) (286) (425 x 310)N201615WT* 22.75 x 16.87 x 16.52 19.70 x 16.04 x 15.99 21.50 x 10.12 15.01 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 420) (500 x 407 x 406) (546 x 257) (381) (387) (286) (425 x 310)N201616WT 22.75 x 16.87 x 17.52 19.70 x 16.04 x 16.99 21.50 x 10.12 16.01 15.25 11.25 16.75 x 12.19 25 lbs. BP-2016(578 x 429 x 445) (500 x 407 x 432) (546 x 257) (407) (387) (286) (425 x 310)N201617WT* 22.75 x 16.87 x 18.52 19.70 x 16.04 x 17.99 21.50 x 10.12 17.01 15.25 11.25 16.75 x 12.19 25 lbs. BP-2016(578 x 429 x 470) (500 x 407 x 457) (546 x 257) (432) (387) (286) (425 x 310)N201618WT* 22.75 x 16.87 x 19.52 19.70 x 16.04 x 18.99 21.50 x 10.12 18.01 15.25 11.25 16.75 x 12.19 25 lbs. BP-2016(578 x 429 x 496) (500 x 407 x 482) (546 x 257) (458) (387) (286) (425 x 310)N201619WT 22.75 x 16.87 x 20.52 19.70 x 16.04 x 19.99 21.50 x 10.12 19.01 15.25 11.25 16.75 x 12.19 27 lbs. BP-2016(578 x 429 x 521) (500 x 407 x 508) (546 x 257) (483) (387) (286) (425 x 310)N20208WT* 23.50 x 20.50 x 9.69 20.25 x 20.25 x 8.88 22.25 x 14.50 7.88 15.25 15.25 17.00 x 16.00 26 lbs. BP-2020(597 x 521 x 246) (514 x 514 x 225) (565 x 368) (200) (387) (387) (432 x 406)N202012WT* 23.50 x 20.50 x 13.69 20.25 x 20.25 x 11.88 22.25 x 14.50 11.88 15.25 15.25 17.00 x 16.00 28 lbs. BP-2020(597 x 521 x 348) (514 x 514 x 302) (565 x 368) (302) (387) (387) (432 x 406)N24126WT 26.95 x 13.72 x 7.98 24.00 x 12.87 x 7.33 25.75 x 6.25 6.33 19.25 7.25 21.00 x 8.37 21 lbs. BP-2412(685 x 348 x 203) (610 x 327 x 186) (654 x 159) (161) (489) (184) (533 x 213)N241210WT 26.95 x 13.72 x 11.99 24.00 x 12.87 x 11.33 25.75 x 6.25 10.33 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 304) (610 x 327 x 288) (654 x 159) (262) (489) (184) (533 x 213)N241211WT* 26.95 x 13.72 x 12.73 24.00 x 12.87 x 12.08 25.75 x 6.25 11.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 323) (610 x 327 x 307) (654 x 159) (281) (489) (184) (533 x 213)N241212WT* 26.95 x 13.72 x 13.73 24.00 x 12.87 x 13.08 25.75 x 6.25 12.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 349) (610 x 327 x 332) (654 x 159) (307) (489) (184) (533 x 213)N241213WT* 26.95 x 13.72 x 14.73 24.00 x 12.87 x 14.08 25.75 x 6.25 13.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 374) (610 x 327 x 358) (654 x 159) (332) (489) (184) (533 x 213)N241214WT* 26.95 x 13.72 x 15.73 24.00 x 12.87 x 15.08 25.75 x 6.25 14.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 400) (610 x 327 x 383) (654 x 159) (358) (489) (184) (533 x 213)N241215WT* 26.95 x 13.72 x 16.73 24.00 x 12.87 x 16.08 25.75 x 6.25 15.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 425) (610 x 327 x 408) (654 x 159) (383) (489) (184) (533 x 213)N241216WT 26.95 x 13.72 x 17.73 24.00 x 12.87 x 17.08 25.75 x 6.25 16.08 19.25 7.25 21.00 x 8.37 26 lbs. BP-2412(685 x 348 x 450) (610 x 327 x 434) (654 x 159) (408) (489) (184) (533 x 213)N241217WT* 26.95 x 13.72 x 18.73 24.00 x 12.87 x 18.08 25.75 x 6.25 17.08 19.25 7.25 21.00 x 8.37 26 lbs. BP-2412(685 x 348 x 476) (610 x 327 x 459) (654 x 159) (434) (489) (184) (533 x 213)N241218WT* 26.95 x 13.72 x 19.73 24.00 x 12.87 x 19.08 25.75 x 6.25 18.08 19.25 7.25 21.00 x 8.37 26 lbs. BP-2412(685 x 348 x 501) (610 x 327 x 485) (654 x 159) (459) (489) (184) (533 x 213)N241219WT* 26.95 x 13.72 x 20.79 24.00 x 12.87 x 20.08 25.75 x 6.25 19.08 19.25 7.25 21.00 x 8.37 27 lbs. BP-2412(685 x 348 x 527) (610 x 327 x 510) (654 x 159) (485) (489) (184) (533 x 213)N241220WT* 26.95 x 13.72 x 21.73 24.00 x 12.87 x 21.08 25.75 x 6.25 20.08 19.25 7.25 21.00 x 8.37 32 lbs. BP-2412(685 x 348 x 552) (610 x 327 x 535) (654 x 159) (510) (489) (184) (533 x 213)CONTROLENCLOSURES*Available as made to order.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com252
Control <strong>Enclosures</strong> Type 4X “WT” Configuration Technical ChartsCONTROLENCLOSURESControl <strong>Enclosures</strong> Type 4X - “WT” Configuration Dimensions (continued)CATALOGNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K LENCLOSURE OPENINGM X NENCLOSUREWEIGHTPANELNUMBERN24208WT 27.00 x 21.24 x 9.90 24.05 x 20.39 x 9.25 25.75 x 14.00 8.25 19.25 15.25 21.25 x 16.00 32 lbs. BP-2420(686 x 539 x 252) (611 x 518 x 235) (654 x 356) (209) (489) (387) (540 x 406)N242010WT* 27.00 x 21.24 x 11.90 24.05 x 20.39 x 11.25 25.75 x 14.00 8.25 19.25 15.25 21.25 x 16.00 37 lbs. BP-2420(686 x 539 x 302) (611 x 518 x 286) (654 x 356) (209) (489) (387) (540 x 406)N242410WT 27.00 x 25.24 x 11.90 24.05 x 24.39 x 11.25 25.75 x 17.87 10.25 19.25 19.25 21.25 x 20.00 42 lbs. BP-2424(686 x 641 x 302) (611 x 619 x 286) (654 x 454) (260) (489) (489) (540 x 508)N242412WT* 27.00 x 25.24 x 13.90 24.05 x 24.39 x 13.25 25.75 x 17.87 12.25 19.25 19.25 21.25 x 20.00 43 lbs. BP-2424(686 x 641 x 353) (611 x 619 x 336) (654 x 454) (311) (489) (489) (540 x 508)N30206WT 32.86 x 20.99 x 7.89 29.90 x 20.14 x 7.23 30.75 x 14.25 6.23 25.25 15.25 27.00 x 16.50 34 lbs. BP-3020(835 x 533 x 200) (760 x 511 x 184) (806 x 362) (158) (641) (387) (686 x 419)N30208WT 32.86 x 20.99 x 9.89 29.90 x 20.14 x 9.23 31.75 x 14.25 8.23 25.25 15.25 27.00 x 16.50 36 lbs. BP-3020(835 x 533 x 251) (760 x 511 x 234) (806 x 362) (209) (641) (387) (686 x 419)N302010WT 32.86 x 20.99 x 11.89 29.90 x 20.14 x 11.23 31.75 x 14.25 10.23 25.25 15.25 27.00 x 16.50 39 lbs. BP-3020(835 x 533 x 302) (760 x 511 x 285) (806 x 362) (260) (641) (387) (686 x 419)N302011WT* 32.86 x 20.99 x 12.89 29.90 x 20.14 x 12.23 31.75 x 14.25 11.23 25.25 15.25 27.00 x 16.50 48 lbs. BP-3020(835 x 533 x 327) (760 x 511 x 311) (806 x 362) (285) (641) (387) (686 x 419)N302012WT 32.86 x 20.99 x 13.89 29.90 x 20.14 x 13.23 31.75 x 14.25 12.23 25.25 15.25 27.00 x 16.50 48 lbs. BP-3020(835 x 533 x 353) (760 x 511 x 336) (806 x 362) (311) (641) (387) (686 x 419)N302013WT* 32.86 x 20.99 x 14.89 29.90 x 20.14 x 14.23 31.75 x 14.25 13.23 25.25 15.25 27.00 x 16.50 48 lbs. BP-3020(835 x 533 x 378) (760 x 511 x 361) (806 x 362) (336) (641) (387) (686 x 419)N302014WT 32.86 x 20.99 x 15.89 29.90 x 20.14 x 15.23 31.75 x 14.25 14.23 25.25 15.25 27.00 x 16.50 49 lbs. BP-3020(835 x 533 x 404) (760 x 511 x 387) (806 x 362) (361) (641) (387) (686 x 419)N30247WT 33.41 x 26.32 x 8.81 30.46 x 25.47 x 8.12 32.25 x 18.50 7.12 25.25 19.25 27.38 x 21.25 45 lbs. BP-3024(849 x 668 x 224) (774 x 647 x 206) (819 x 470) (181) (641) (489) (695 x 540)N302410WT 33.41 x 26.32 x 11.95 30.46 x 25.47 x 11.27 32.25 x 18.50 10.27 25.25 19.25 27.38 x 21.25 50 lbs. BP-3024(849 x 668 x 304) (774 x 647 x 286) (819 x 470) (261) (641) (489) (695 x 540)N302412WT 33.41 x 26.32 x 13.79 30.46 x 25.47 x 13.10 32.25 x 18.50 12.1 25.25 19.25 27.38 x 21.25 54 lbs. BP-3024(849 x 668 x 350) (774 x 647 x 333) (819 x 470) (307) (641) (489) (695 x 540)N302413WT* 33.41 x 26.32 x 14.79 30.46 x 25.47 x 14.10 32.25 x 18.50 13.1 25.25 19.25 27.38 x 21.25 55 lbs. BP-3024(849 x 668 x 376) (774 x 647 x 358) (819 x 470) (333) (641) (489) (695 x 540)N302414WT 33.41 x 26.32 x 15.79 30.46 x 25.47 x 15.10 32.25 x 18.50 14.1 25.25 19.25 27.38 x 21.25 56 lbs. BP-3024(849 x 668 x 401) (774 x 647 x 384) (819 x 470) (358) (641) (489) (695 x 540)N302415WT* 33.41 x 26.32 x 16.79 30.46 x 25.47 x 16.10 32.25 x 18.50 15.1 25.25 19.25 27.38 x 21.25 58 lbs. BP-3024(849 x 668 x 426) (774 x 647 x 409) (819 x 470) (384) (641) (489) (695 x 540)N302416WT 33.41 x 26.32 x 17.79 30.46 x 25.47 x 17.10 32.25 x 18.50 16.1 25.25 19.25 27.38 x 21.25 62 lbs. BP-3024(849 x 668 x 452) (774 x 647 x 434) (819 x 470) (409) (641) (489) (695 x 540)N302417WT* 33.41 x 26.32 x 18.79 30.46 x 25.47 x 18.10 32.25 x 18.50 17.1 25.25 19.25 27.38 x 21.25 63 lbs. BP-3024(849 x 668 x 477) (774 x 647 x 460) (819 x 470) (434) (641) (489) (695 x 540)N302418WT* 33.41 x 26.32 x 19.79 30.46 x 25.47 x 19.10 32.25 x 18.50 18.1 25.25 19.25 27.38 x 21.25 64 lbs. BP-3024(849 x 668 x 503) (774 x 647 x 485) (819 x 470) (460) (641) (489) (695 x 540)N302419WT* 33.41 x 26.32 x 20.79 30.46 x 25.47 x 20.10 32.25 x 18.50 19.1 25.25 19.25 27.38 x 21.25 65 lbs. BP-3024(849 x 668 x 528) (774 x 647 x 511) (819 x 470) (485) (641) (489) (695 x 540)N302421WT* 33.41 x 26.32 x 21.79 30.46 x 25.47 x 21.10 32.25 x 18.50 20.1 25.25 19.25 27.38 x 21.25 66 lbs. BP-3024(849 x 668 x 553) (774 x 647 x 536) (819 x 470) (511) (641) (489) (695 x 540)N302422WT 33.41 x 26.32 x 22.79 30.46 x 25.47 x 21.10 32.25 x 18.50 21.1 25.25 19.25 27.38 x 21.25 67 lbs. BP-3024(849 x 668 x 579) (774 x 647 x 536) (819 x 470) (536) (641) (489) (695 x 540)N36308WT 39.31 x 32.50 x 10.05 36.31 x 31.69 x 9.36 38.13 x 23.88 8.36 31.25 25.25 33.25 x 27.25 75 lbs. BP-3630(999 x 826 x 255) (922 x 805 x 238) (968 x 606) (212) (794) (641) (845 x 692)N363010WT 39.31 x 32.50 x 12.05 36.31 x 31.69 x 11.36 38.13 x 23.88 10.36 31.25 25.25 33.25 x 27.25 78 lbs. BP-3630(999 x 826 x 306) (922 x 805 x 289) (968 x 606) (263) (794) (641) (845 x 692)N363012WT 39.31 x 32.50 x 14.05 36.31 x 31.69 x 13.36 38.13 x 23.88 12.36 31.25 25.25 33.25 x 27.25 81 lbs. BP-3630(999 x 826 x 357) (922 x 805 x 339) (968 x 606) (314) (794) (641) (845 x 692)N363013WT* 39.31 x 32.50 x 15.08 36.31 x 31.69 x 14.39 38.13 x 23.88 13.39 31.25 25.25 33.25 x 27.25 85 lbs. BP-3630(999 x 826 x 383) (922 x 805 x 366) (968 x 606) (340) (794) (641) (845 x 692)N363014WT* 39.31 x 32.50 x 16.08 36.31 x 31.69 x 15.39 38.13 x 23.88 14.39 31.25 25.25 33.25 x 27.25 87 lbs. BP-3630(999 x 826 x 408) (922 x 805 x 391) (968 x 606) (366) (794) (641) (845 x 692)*Available as made to order.253<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Control <strong>Enclosures</strong> Type 4X “WT” Configuration Technical Charts & DrawingsWFDNumber of LatchesHEABAMJAKHWT WT FHLWTSTAINLESS LIFT OFF FIBERGLASSSTEEL COVER HINGEHINGEN1610* 2 4 2N2016 2 4 2N2412 2 4 2N2420 4 6 4N2424 4 6 4N3020 5 6 5N3024 5 8 5N3630 5 8 5N4836 10 14 10*N1610 has no padlock hasp featureB<strong>SE</strong>CTION B-BNCBL<strong>SE</strong>CTION A-ANOTE: Mounting hole dimension is .50 inches.Optional back panels available in various materials. See Accessories section.CONTROLENCLOSURESControl <strong>Enclosures</strong> Type 4X - “WT” Configuration Dimensions (continued)CATALOG OVERALL INSIDE MOUNTING ENCLOSURE OPENING ENCLOSURE PANELNUMBER H X W X D A X B X C E X F J K L M X N WEIGHT NUMBERN363015WT 31 x 32.50 x 17.08 36.31 x 31.69 x 16.39 38.13 x 23.88 15.39 31.25 25.25 33.25 x 27.25 88 lbs. BP-3630(999 x 826 x 434) (922 x 805 x 416) (968 x 606) (391) (794) (641) (845 x 692)N363016WT 39.31 x 32.50 x 18.08 36.31 x 31.69 x 17.39 38.13 x 23.88 16.39 31.25 25.25 33.25 x 27.25 89 lbs. BP-3630(999 x 826 x 459) (922 x 805 x 442) (968 x 606) (416) (794) (641) (845 x 692)N363017WT* 39.31 x 32.50 x 19.08 36.31 x 31.69 x 18.39 38.13 x 23.88 17.39 31.25 25.25 33.25 x 27.25 90 lbs. BP-3630(999 x 826 x 485) (922 x 805 x 467) (968 x 606) (442) (794) (641) (845 x 692)N363018WT* 39.31 x 32.50 x 20.08 36.31 x 31.69 x 19.39 38.13 x 23.88 18.39 31.25 25.25 33.25 x 27.25 91 lbs. BP-3630(999 x 826 x 510) (922 x 805 x 493) (968 x 606) (467) (794) (641) (845 x 692)N363019WT* 39.31 x 32.50 x 21.08 36.31 x 31.69 x 20.39 38.13 x 23.88 19.39 31.25 25.25 33.25 x 27.25 92 lbs. BP-3630(999 x 826 x 535) (922 x 805 x 518) (968 x 606) (492) (794) (641) (845 x 692)N363020WT* 39.31 x 32.50 x 22.08 36.31 x 31.69 x 21.39 38.13 x 23.88 20.39 31.25 25.25 33.25 x 27.25 93 lbs. BP-3630(999 x 826 x 561) (922 x 805 x 543) (968 x 606) (518) (794) (641) (845 x 692)N363021WT* 39.31 x 32.50 x 23.08 36.31 x 31.69 x 22.39 38.13 x 23.88 21.39 31.25 25.25 33.25 x 27.25 94 lbs. BP-3630(999 x 826 x 586) (922 x 805 x 569) (968 x 606) (543) (794) (641) (845 x 692)N363022WT* 39.31 x 32.50 x 24.08 36.31 x 31.69 x 23.39 38.13 x 23.88 22.39 31.25 25.25 33.25 x 27.25 95 lbs. BP-3630(999 x 826 x 612) (922 x 805 x 594) (968 x 606) (569) (794) (641) (845 x 692)N363023WT 39.31 x 32.50 x 25.08 36.31 x 31.69 x 24.39 38.13 x 23.88 23.39 31.25 25.25 33.25 x 27.25 96 lbs. BP-3630(999 x 826 x 637) (922 x 805 x 620) (968 x 606) (594) (794) (641) (845 x 692)N363613WT* 39.50 x 36.50 x 14.56 36.25 x 36.25 x 13.88 38.25 x 28.50 12.87 29 31 32.00 x 32.00 88 lbs. BP-3636(1003 x 927 x 370) (921 x 921 x 352) (972 x 724) (327) (737) (787) (813 x 813)*Available as made to order.All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com254
Technical Specifications - Control <strong>Enclosures</strong> Type 4X“HWT” configuration - Stainless steel hinged, latched down coverNHWT ConstructionMaterialGasketStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyester,hand layup FRPPoured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisN24208HWTNOTES:HWTIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 3R, 4X, 12NEMA 250 Type 1, 3, 3R, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 3R, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixCONTROLENCLOSURESHWT AccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 331Carbon Steel BP__CS pg. 331Fiberglass BP__FG pg. 331Stainless Steel BP__SS pg. 331Special AccessoriesVent pg. 323Louver pg. 325Assorted hubs and cord grips pg. 327, 328Vapor capsule pg. 326HWTModifications See Special ModRight Modification pg 315 - 322ORDERING INFOAvailable In These Sizes Only:N24208HWTN242410HWTN302410HWTN363012HWTDoor brace pg. 336Grounding studs pg. 339Removable dead front panels pg. 333Molded in color pg. 315 - 322Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom windows pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322255<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Control <strong>Enclosures</strong> Type 4X “HWT” Configuration Technical ChartsControl <strong>Enclosures</strong> Type 4X - “HWT” Configuration DimensionsCATALOGNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K LENCLOSURE OPENINGM X NENCLOSUREWEIGHTPANELNUMBERN16107HWT 18.75 x 10.96 x 9.03 15.92 x 10.27 x 8.53 17.50 x 7.00 7.8 12 7.5 13.14 x 6.00 12 lbs. BP-1610(476 x 278 x 229) (404 x 261 x 217) (444 x 178) (198) (305) (191) (334 x 152)N20166HWT 22.75 x 16.87 x 7.77 19.70 x 16.04 x 7.24 21.50 x 10.12 6.26 15.25 11.25 16.75 x 12.19 17 lbs. BP-2016(578 x 429 x 197) (500 x 407 x 184) (546 x 257) (159) (387) (286) (425 x 310)N20168HWT 22.75 x 16.87 x 9.77 19.70 x 16.04 x 9.24 21.50 x 10.12 8.26 15.25 11.25 16.75 x 12.19 22 lbs. BP-2016(578 x 429 x 248) (500 x 407 x 235) (546 x 257) (210) (387) (286) (425 x 310)N201610HWT 22.75 x 16.87 x 11.77 19.70 x 16.04 x 11.24 21.50 x 10.12 10.26 15.25 11.25 16.75 x 12.19 23 lbs. BP-2016(578 x 429 x 299) (500 x 407 x 286) (546 x 257) (261) (387) (286) (425 x 310)N201611HWT* 22.75 x 16.87 x 12.77 19.70 x 16.04 x 12.26 21.50 x 10.12 11.26 15.25 11.25 16.75 x 12.19 23 lbs. BP-2016(578 x 429 x 324 (500 x 407 x 311) (546 x 257) (286) (387) (286) (425 x 310)N201612HWT 22.75 x 16.87 x 13.77 19.70 x 16.04 x 13.24 21.50 x 10.12 12.26 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 350) (500 x 407 x 336) (546 x 257) (312) (387) (286) (425 x 310)N201613HWT* 22.75 x 16.87 x 14.52 19.70 x 16.04 x 13.99 21.50 x 10.12 13.01 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 369) (500 x 407 x 355) (546 x 257) (331) (387) (286) (425 x 310)N201614HWT* 22.75 x 16.87 x 15.52 19.70 x 16.04 x 14.99 21.50 x 10.12 14.01 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 394) (500 x 407 x 381) (546 x 257) (356) (387) (286) (425 x 310)N201615HWT* 22.75 x 16.87 x 16.52 19.70 x 16.04 x 15.99 21.50 x 10.12 15.01 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 420) (500 x 407 x 406) (546 x 257) (381) (387) (286) (425 x 310)N201616HWT 22.75 x 16.87 x 17.52 19.70 x 16.04 x 16.99 21.50 x 10.12 16.01 15.25 11.25 16.75 x 12.19 25 lbs. BP-2016(578 x 429 x 445) (500 x 407 x 432) (546 x 257) (407) (387) (286) (425 x 310)N201617HWT* 22.75 x 16.87 x 18.52 19.70 x 16.04 x 17.99 21.50 x 10.12 17.01 15.25 11.25 16.75 x 12.19 25 lbs. BP-2016(578 x 429 x 470) (500 x 407 x 457) (546 x 257) (432) (387) (286) (425 x 310)N201618HWT* 22.75 x 16.87 x 19.52 19.70 x 16.04 x 18.99 21.50 x 10.12 18.01 15.25 11.25 16.75 x 12.19 25 lbs. BP-2016(578 x 429 x 496) (500 x 407 x 482) (546 x 257) (458) (387) (286) (425 x 310)N201619HWT 22.75 x 16.87 x 20.52 19.70 x 16.04 x 19.99 21.50 x 10.12 19.01 15.25 11.25 16.75 x 12.19 27 lbs. BP-2016(578 x 429 x 521) (500 x 407 x 508) (546 x 257) (483) (387) (286) (425 x 310)N20208 HWT* 23.50 x 20.50 x 9.69 20.25 x 20.25 x 8.88 22.25 x 14.50 7.88 15.25 15.25 17.00 x 16.00 26 lbs. BP-2020(597 x 521 x 246) (514 x 514 x 225) (565 x 368) (200) (387) (387) (432 x 406)N202012HWT* 23.50 x 20.50 x 13.69 20.25 x 20.25 x 11.88 22.25 x 14.50 11.88 15.25 15.25 17.00 x 16.00 28 lbs. BP-2020(597 x 521 x 348) (514 x 514 x 302) (565 x 368) (302) (387) (387) (432 x 406)N24126HWT 26.95 x 13.72 x 7.98 24.00 x 12.87 x 7.33 25.75 x 6.25 6.33 19.25 7.25 21.00 x 8.37 21 lbs. BP-2412(685 x 348 x 203) (610 x 327 x 186) (654 x 159) (161) (489) (184) (533 x 213)N241210HWT 26.95 x 13.72 x 11.99 24.00 x 12.87 x 11.33 25.75 x 6.25 10.33 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 304) (610 x 327 x 288) (654 x 159) (262) (489) (184) (533 x 213)N241211HWT* 26.95 x 13.72 x 12.73 24.00 x 12.87 x 12.08 25.75 x 6.25 11.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 323) (610 x 327 x 307) (654 x 159) (281) (489) (184) (533 x 213)N241212HWT* 26.95 x 13.72 x 13.73 24.00 x 12.87 x 13.08 25.75 x 6.25 12.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 349) (610 x 327 x 332) (654 x 159) (307) (489) (184) (533 x 213)N241213HWT* 26.95 x 13.72 x 14.73 24.00 x 12.87 x 14.08 25.75 x 6.25 13.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 374) (610 x 327 x 358) (654 x 159) (332) (489) (184) (533 x 213)N241214HWT* 26.95 x 13.72 x 15.73 24.00 x 12.87 x 15.08 25.75 x 6.25 14.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 400) (610 x 327 x 383) (654 x 159) (358) (489) (184) (533 x 213)N241215HWT* 26.95 x 13.72 x 16.73 24.00 x 12.87 x 16.08 25.75 x 6.25 15.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 425) (610 x 327 x 408) (654 x 159) (383) (489) (184) (533 x 213)N241216HWT 26.95 x 13.72 x 17.73 24.00 x 12.87 x 17.08 25.75 x 6.25 16.08 19.25 7.25 21.00 x 8.37 26 lbs. BP-2412(685 x 348 x 450) (610 x 327 x 434) (654 x 159) (408) (489) (184) (533 x 213)N241217HWT* 26.95 x 13.72 x 18.73 24.00 x 12.87 x 18.08 25.75 x 6.25 17.08 19.25 7.25 21.00 x 8.37 26 lbs. BP-2412(685 x 348 x 476) (610 x 327 x 459) (654 x 159) (434) (489) (184) (533 x 213)N241218HWT* 26.95 x 13.72 x 19.73 24.00 x 12.87 x 19.08 25.75 x 6.25 18.08 19.25 7.25 21.00 x 8.37 26 lbs. BP-2412(685 x 348 x 501) (610 x 327 x 485) (654 x 159) (459) (489) (184) (533 x 213)N241219HWT* 26.95 x 13.72 x 20.79 24.00 x 12.87 x 20.08 25.75 x 6.25 19.08 19.25 7.25 21.00 x 8.37 27 lbs. BP-2412(685 x 348 x 527) (610 x 327 x 510) (654 x 159) (485) (489) (184) (533 x 213)N241220HWT* 26.95 x 13.72 x 21.73 24.00 x 12.87 x 21.08 25.75 x 6.25 20.08 19.25 7.25 21.00 x 8.37 32 lbs. BP-2412(685 x 348 x 552) (610 x 327 x 535) (654 x 159) (510) (489) (184) (533 x 213)CONTROLENCLOSURES*Available as made to order.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com256
Control <strong>Enclosures</strong> Type 4X “HWT” Configuration Technical ChartsCONTROLENCLOSURESControl <strong>Enclosures</strong> Type 4X - “HWT” Configuration Dimensions (continued)CATALOGNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K LENCLOSURE OPENINGM X NENCLOSUREWEIGHTPANELNUMBERN24208HWT 27.00 x 21.24 x 9.90 24.05 x 20.39 x 9.25 25.75 x 14.00 8.25 19.25 15.25 21.25 x 16.00 32 lbs. BP-2420(686 x 539 x 252) (611 x 518 x 235) (654 x 356) (209) (489) (387) (540 x 406)N242010HWT* 27.00 x 21.24 x 11.90 24.05 x 20.39 x 11.25 25.75 x 14.00 8.25 19.25 15.25 21.25 x 16.00 37 lbs. BP-2420(686 x 539 x 302) (611 x 518 x 286) (654 x 356) (209) (489) (387) (540 x 406)N242410HWT 27.00 x 25.24 x 11.90 24.05 x 24.39 x 11.25 25.75 x 17.87 10.25 19.25 19.25 21.25 x 20.00 42 lbs. BP-2424(686 x 641 x 302) (611 x 619 x 286) (654 x 454) (260) (489) (489) (540 x 508)N242412HWT* 27.00 x 25.24 x 13.90 24.05 x 24.39 x 13.25 25.75 x 17.87 12.25 19.25 19.25 21.25 x 20.00 43 lbs. BP-2424(686 x 641 x 353) (611 x 619 x 336) (654 x 454) (311) (489) (489) (540 x 508)N30206HWT 32.86 x 20.99 x 7.89 29.90 x 20.14 x 7.23 30.75 x 14.25 6.23 25.25 15.25 27.00 x 16.50 34 lbs. BP-3020(835 x 533 x 200) (760 x 511 x 184) (806 x 362) (158) (641) (387) (686 x 419)N30208HWT 32.86 x 20.99 x 9.89 29.90 x 20.14 x 9.23 31.75 x 14.25 8.23 25.25 15.25 27.00 x 16.50 36 lbs. BP-3020(835 x 533 x 251) (760 x 511 x 234) (806 x 362) (209) (641) (387) (686 x 419)N302010HWT 32.86 x 20.99 x 11.89 29.90 x 20.14 x 11.23 31.75 x 14.25 10.23 25.25 15.25 27.00 x 16.50 39 lbs. BP-3020(835 x 533 x 302) (760 x 511 x 285) (806 x 362) (260) (641) (387) (686 x 419)N302011HWT* 32.86 x 20.99 x 12.89 29.90 x 20.14 x 12.23 31.75 x 14.25 11.23 25.25 15.25 27.00 x 16.50 48 lbs. BP-3020(835 x 533 x 327) (760 x 511 x 311) (806 x 362) (285) (641) (387) (686 x 419)N302012HWT 32.86 x 20.99 x 13.89 29.90 x 20.14 x 13.23 31.75 x 14.25 12.23 25.25 15.25 27.00 x 16.50 48 lbs. BP-3020(835 x 533 x 353) (760 x 511 x 336) (806 x 362) (311) (641) (387) (686 x 419)N302013HWT* 32.86 x 20.99 x 14.89 29.90 x 20.14 x 14.23 31.75 x 14.25 13.23 25.25 15.25 27.00 x 16.50 48 lbs. BP-3020(835 x 533 x 378) (760 x 511 x 361) (806 x 362) (336) (641) (387) (686 x 419)N302014HWT 32.86 x 20.99 x 15.89 29.90 x 20.14 x 15.23 31.75 x 14.25 14.23 25.25 15.25 27.00 x 16.50 49 lbs. BP-3020(835 x 533 x 404) (760 x 511 x 387) (806 x 362) (361) (641) (387) (686 x 419)N30247HWT 33.41 x 26.32 x 8.81 30.46 x 25.47 x 8.12 32.25 x 18.50 7.12 25.25 19.25 27.38 x 21.25 45 lbs. BP-3024(849 x 668 x 224) (774 x 647 x 206) (819 x 470) (181) (641) (489) (695 x 540)N302410HWT 33.41 x 26.32 x 11.95 30.46 x 25.47 x 11.27 32.25 x 18.50 10.27 25.25 19.25 27.38 x 21.25 50 lbs. BP-3024(849 x 668 x 304) (774 x 647 x 286) (819 x 470) (261) (641) (489) (695 x 540)N302412HWT 33.41 x 26.32 x 13.79 30.46 x 25.47 x 13.10 32.25 x 18.50 12.1 25.25 19.25 27.38 x 21.25 54 lbs. BP-3024(849 x 668 x 350) (774 x 647 x 333) (819 x 470) (307) (641) (489) (695 x 540)N302413HWT* 33.41 x 26.32 x 14.79 30.46 x 25.47 x 14.10 32.25 x 18.50 13.1 25.25 19.25 27.38 x 21.25 55 lbs. BP-3024(849 x 668 x 376) (774 x 647 x 358) (819 x 470) (333) (641) (489) (695 x 540)N302414HWT 33.41 x 26.32 x 15.79 30.46 x 25.47 x 15.10 32.25 x 18.50 14.1 25.25 19.25 27.38 x 21.25 56 lbs. BP-3024(849 x 668 x 401) (774 x 647 x 384) (819 x 470) (358) (641) (489) (695 x 540)N302415HWT* 33.41 x 26.32 x 16.79 30.46 x 25.47 x 16.10 32.25 x 18.50 15.1 25.25 19.25 27.38 x 21.25 58 lbs. BP-3024(849 x 668 x 426) (774 x 647 x 409) (819 x 470) (384) (641) (489) (695 x 540)N302416HWT 33.41 x 26.32 x 17.79 30.46 x 25.47 x 17.10 32.25 x 18.50 16.1 25.25 19.25 27.38 x 21.25 62 lbs. BP-3024(849 x 668 x 452) (774 x 647 x 434) (819 x 470) (409) (641) (489) (695 x 540)N302417HWT* 33.41 x 26.32 x 18.79 30.46 x 25.47 x 18.10 32.25 x 18.50 17.1 25.25 19.25 27.38 x 21.25 63 lbs. BP-3024(849 x 668 x 477) (774 x 647 x 460) (819 x 470) (434) (641) (489) (695 x 540)N302418HWT* 33.41 x 26.32 x 19.79 30.46 x 25.47 x 19.10 32.25 x 18.50 18.1 25.25 19.25 27.38 x 21.25 64 lbs. BP-3024(849 x 668 x 503) (774 x 647 x 485) (819 x 470) (460) (641) (489) (695 x 540)N302419HWT* 33.41 x 26.32 x 20.79 30.46 x 25.47 x 20.10 32.25 x 18.50 19.1 25.25 19.25 27.38 x 21.25 65 lbs. BP-3024(849 x 668 x 528) (774 x 647 x 511) (819 x 470) (485) (641) (489) (695 x 540)N302421HWT* 33.41 x 26.32 x 21.79 30.46 x 25.47 x 21.10 32.25 x 18.50 20.1 25.25 19.25 27.38 x 21.25 66 lbs. BP-3024(849 x 668 x 553) (774 x 647 x 536) (819 x 470) (511) (641) (489) (695 x 540)N302422HWT 33.41 x 26.32 x 22.79 30.46 x 25.47 x 21.10 32.25 x 18.50 21.1 25.25 19.25 27.38 x 21.25 67 lbs. BP-3024(849 x 668 x 579) (774 x 647 x 536) (819 x 470) (536) (641) (489) (695 x 540)N36308HWT 39.31 x 32.50 x 10.05 36.31 x 31.69 x 9.36 38.13 x 23.88 8.36 31.25 25.25 33.25 x 27.25 75 lbs. BP-3630(999 x 826 x 255) (922 x 805 x 238) (968 x 606) (212) (794) (641) (845 x 692)N363010HWT 39.31 x 32.50 x 12.05 36.31 x 31.69 x 11.36 38.13 x 23.88 10.36 31.25 25.25 33.25 x 27.25 78 lbs. BP-3630(999 x 826 x 306) (922 x 805 x 289) (968 x 606) (263) (794) (641) (845 x 692)N363012HWT 39.31 x 32.50 x 14.05 36.31 x 31.69 x 13.36 38.13 x 23.88 12.36 31.25 25.25 33.25 x 27.25 81 lbs. BP-3630(999 x 826 x 357) (922 x 805 x 339) (968 x 606) (314) (794) (641) (845 x 692)N363013HWT* 39.31 x 32.50 x 15.08 36.31 x 31.69 x 14.39 38.13 x 23.88 13.39 31.25 25.25 33.25 x 27.25 85 lbs. BP-3630(999 x 826 x 383) (922 x 805 x 366) (968 x 606) (340) (794) (641) (845 x 692)N363014HWT* 39.31 x 32.50 x 16.08 36.31 x 31.69 x 15.39 38.13 x 23.88 14.39 31.25 25.25 33.25 x 27.25 87 lbs. BP-3630(999 x 826 x 408) (922 x 805 x 391) (968 x 606) (366) (794) (641) (845 x 692)*Available as made to order. • Sizes indicated in RED are available in ColorGuard257<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Control <strong>Enclosures</strong> Type 4X “HWT” Configuration Technical Charts & DrawingsWFDNumber of LatchesHEABAMJAKHWT WT FHLWTSTAINLESS LIFT OFF FIBERGLASSSTEEL COVER HINGEHINGEN1610* 2 4 2N2016 2 4 2N2412 2 4 2N2420 4 6 4N2424 4 6 4N3020 5 6 5N3024 5 8 5N3630 5 8 5N4836 10 14 10*N1610 has no padlock hasp featureB<strong>SE</strong>CTION B-BNCBL<strong>SE</strong>CTION A-ANOTE: Mounting hole dimension is .50 inches.Optional back panels available in various materials. See Accessories section.CONTROLENCLOSURESControl <strong>Enclosures</strong> Type 4X - “HWT” Configuration Dimensions (continued)CATALOG OVERALL INSIDE MOUNTING ENCLOSURE OPENING ENCLOSURE PANELNUMBER H X W X D A X B X C E X F J K L M X N WEIGHT NUMBERN363015HWT 31 x 32.50 x 17.08 36.31 x 31.69 x 16.39 38.13 x 23.88 15.39 31.25 25.25 33.25 x 27.25 88 lbs. BP-3630(999 x 826 x 434) (922 x 805 x 416) (968 x 606) (391) (794) (641) (845 x 692)N363016HWT 39.31 x 32.50 x 18.08 36.31 x 31.69 x 17.39 38.13 x 23.88 16.39 31.25 25.25 33.25 x 27.25 89 lbs. BP-3630(999 x 826 x 459) (922 x 805 x 442) (968 x 606) (416) (794) (641) (845 x 692)N363017HWT* 39.31 x 32.50 x 19.08 36.31 x 31.69 x 18.39 38.13 x 23.88 17.39 31.25 25.25 33.25 x 27.25 90 lbs. BP-3630(999 x 826 x 485) (922 x 805 x 467) (968 x 606) (442) (794) (641) (845 x 692)N363018HWT* 39.31 x 32.50 x 20.08 36.31 x 31.69 x 19.39 38.13 x 23.88 18.39 31.25 25.25 33.25 x 27.25 91 lbs. BP-3630(999 x 826 x 510) (922 x 805 x 493) (968 x 606) (467) (794) (641) (845 x 692)N363019HWT* 39.31 x 32.50 x 21.08 36.31 x 31.69 x 20.39 38.13 x 23.88 19.39 31.25 25.25 33.25 x 27.25 92 lbs. BP-3630(999 x 826 x 535) (922 x 805 x 518) (968 x 606) (492) (794) (641) (845 x 692)N363020HWT* 39.31 x 32.50 x 22.08 36.31 x 31.69 x 21.39 38.13 x 23.88 20.39 31.25 25.25 33.25 x 27.25 93 lbs. BP-3630(999 x 826 x 561) (922 x 805 x 543) (968 x 606) (518) (794) (641) (845 x 692)N363021HWT* 39.31 x 32.50 x 23.08 36.31 x 31.69 x 22.39 38.13 x 23.88 21.39 31.25 25.25 33.25 x 27.25 94 lbs. BP-3630(999 x 826 x 586) (922 x 805 x 569) (968 x 606) (543) (794) (641) (845 x 692)N363022HWT* 39.31 x 32.50 x 24.08 36.31 x 31.69 x 23.39 38.13 x 23.88 22.39 31.25 25.25 33.25 x 27.25 95 lbs. BP-3630(999 x 826 x 612) (922 x 805 x 594) (968 x 606) (569) (794) (641) (845 x 692)N363023HWT 39.31 x 32.50 x 25.08 36.31 x 31.69 x 24.39 38.13 x 23.88 23.39 31.25 25.25 33.25 x 27.25 96 lbs. BP-3630(999 x 826 x 637) (922 x 805 x 620) (968 x 606) (594) (794) (641) (845 x 692)N363613HWT* 39.50 x 36.50 x 14.56 36.25 x 36.25 x 13.88 38.25 x 28.50 12.87 29 31 32.00 x 32.00 88 lbs. BP-3636(1003 x 927 x 370) (921 x 921 x 352) (972 x 724) (327) (737) (787) (813 x 813)*Available as made to order.All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com258
“FHLWT” configuration - Fiberglass hinged, latched down coverTechnical Specifications - Control <strong>Enclosures</strong> Type 4XNFHLWT ConstructionMaterialGasket<strong>Non</strong>-<strong>Metallic</strong> HardwareMounting BossesMetal InsertsSoft Edge DesignHot compression molded fiberglass reinforced polyester,hand layup FRPPoured polyurethane seamless gasket provides watertight,dust-tight environmental sealFG composite hinge, nylon quarter turn latchesPanel mounting capability for fixed rear panelAll bosses utilize threaded brass inserts accepting 10-32 screwsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisCONTROLENCLOSURESNOTES:N20168FHLWTFHLWTIndustry StandardsUL/cUL 50 File E64358 Type 1, 3, 3R, 4X, 12NEMA 250 Type 1, 3, 3R, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 3R, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixFHLWT AccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 331Carbon Steel BP__CS pg. 331Fiberglass BP__FG pg. 331Stainless Steel BP__SS pg. 331Special AccessoriesVent pg. 323Louver pg. 325Assorted hubs and cord grips pg. 327, 328Vapor capsule pg. 326FHLWTModifications See Special ModRight Modification pg 315 - 322ORDERING INFODoor brace pg. 336Grounding studs pg. 339Removable dead front panels pg. 333Molded in color pg. 315 - 322Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom windows pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322259<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Control <strong>Enclosures</strong> Type 4X “FHLWT” Configuration Technical ChartsControl <strong>Enclosures</strong> Type 4X - “FHLWT” Configuration DimensionsCATALOGNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K LENCLOSURE OPENINGM X NENCLOSUREWEIGHTPANELNUMBERN16107FHLWT 18.75 x 10.96 x 9.03 15.92 x 10.27 x 8.53 17.50 x 7.00 7.8 12 7.5 13.14 x 6.00 12 lbs. BP-1610(476 x 278 x 229) (404 x 261 x 217) (444 x 178) (198) (305) (191) (334 x 152)N20166FHLWT 22.75 x 16.87 x 7.77 19.70 x 16.04 x 7.24 21.50 x 10.12 6.26 15.25 11.25 16.75 x 12.19 17 lbs. BP-2016(578 x 429 x 197) (500 x 407 x 184) (546 x 257) (159) (387) (286) (425 x 310)N20168FHLWT 22.75 x 16.87 x 9.77 19.70 x 16.04 x 9.24 21.50 x 10.12 8.26 15.25 11.25 16.75 x 12.19 22 lbs. BP-2016(578 x 429 x 248) (500 x 407 x 235) (546 x 257) (210) (387) (286) (425 x 310)N201610FHLWT 22.75 x 16.87 x 11.77 19.70 x 16.04 x 11.24 21.50 x 10.12 10.26 15.25 11.25 16.75 x 12.19 23 lbs. BP-2016(578 x 429 x 299) (500 x 407 x 286) (546 x 257) (261) (387) (286) (425 x 310)N201611FHLWT* 22.75 x 16.87 x 12.77 19.70 x 16.04 x 12.26 21.50 x 10.12 11.26 15.25 11.25 16.75 x 12.19 23 lbs. BP-2016(578 x 429 x 324 (500 x 407 x 311) (546 x 257) (286) (387) (286) (425 x 310)N201612FHLWT 22.75 x 16.87 x 13.77 19.70 x 16.04 x 13.24 21.50 x 10.12 12.26 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 350) (500 x 407 x 336) (546 x 257) (312) (387) (286) (425 x 310)N201613FHLWT* 22.75 x 16.87 x 14.52 19.70 x 16.04 x 13.99 21.50 x 10.12 13.01 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 369) (500 x 407 x 355) (546 x 257) (331) (387) (286) (425 x 310)N201614FHLWT* 22.75 x 16.87 x 15.52 19.70 x 16.04 x 14.99 21.50 x 10.12 14.01 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 394) (500 x 407 x 381) (546 x 257) (356) (387) (286) (425 x 310)N201615FHLWT* 22.75 x 16.87 x 16.52 19.70 x 16.04 x 15.99 21.50 x 10.12 15.01 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 420) (500 x 407 x 406) (546 x 257) (381) (387) (286) (425 x 310)N201616FHLWT 22.75 x 16.87 x 17.52 19.70 x 16.04 x 16.99 21.50 x 10.12 16.01 15.25 11.25 16.75 x 12.19 25 lbs. BP-2016(578 x 429 x 445) (500 x 407 x 432) (546 x 257) (407) (387) (286) (425 x 310)N201617FHLWT* 22.75 x 16.87 x 18.52 19.70 x 16.04 x 17.99 21.50 x 10.12 17.01 15.25 11.25 16.75 x 12.19 25 lbs. BP-2016(578 x 429 x 470) (500 x 407 x 457) (546 x 257) (432) (387) (286) (425 x 310)N201618FHLWT* 22.75 x 16.87 x 19.52 19.70 x 16.04 x 18.99 21.50 x 10.12 18.01 15.25 11.25 16.75 x 12.19 25 lbs. BP-2016(578 x 429 x 496) (500 x 407 x 482) (546 x 257) (458) (387) (286) (425 x 310)N201619FHLWT 22.75 x 16.87 x 20.52 19.70 x 16.04 x 19.99 21.50 x 10.12 19.01 15.25 11.25 16.75 x 12.19 27 lbs. BP-2016(578 x 429 x 521) (500 x 407 x 508) (546 x 257) (483) (387) (286) (425 x 310)N20208FHLWT* 23.50 x 20.50 x 9.69 20.25 x 20.25 x 8.88 22.25 x 14.50 7.88 15.25 15.25 17.00 x 16.00 26 lbs. BP-2020(597 x 521 x 246) (514 x 514 x 225) (565 x 368) (200) (387) (387) (432 x 406)N202012FHLWT* 23.50 x 20.50 x 13.69 20.25 x 20.25 x 11.88 22.25 x 14.50 11.88 15.25 15.25 17.00 x 16.00 28 lbs. BP-2020(597 x 521 x 348) (514 x 514 x 302) (565 x 368) (302) (387) (387) (432 x 406)N24126FHLWT 26.95 x 13.72 x 7.98 24.00 x 12.87 x 7.33 25.75 x 6.25 6.33 19.25 7.25 21.00 x 8.37 21 lbs. BP-2412(685 x 348 x 203) (610 x 327 x 186) (654 x 159) (161) (489) (184) (533 x 213)N241210FHLWT 26.95 x 13.72 x 11.99 24.00 x 12.87 x 11.33 25.75 x 6.25 10.33 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 304) (610 x 327 x 288) (654 x 159) (262) (489) (184) (533 x 213)N241211FHLWT* 26.95 x 13.72 x 12.73 24.00 x 12.87 x 12.08 25.75 x 6.25 11.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 323) (610 x 327 x 307) (654 x 159) (281) (489) (184) (533 x 213)N241212FHLWT* 26.95 x 13.72 x 13.73 24.00 x 12.87 x 13.08 25.75 x 6.25 12.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 349) (610 x 327 x 332) (654 x 159) (307) (489) (184) (533 x 213)N241213FHLWT* 26.95 x 13.72 x 14.73 24.00 x 12.87 x 14.08 25.75 x 6.25 13.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 374) (610 x 327 x 358) (654 x 159) (332) (489) (184) (533 x 213)N241214FHLWT* 26.95 x 13.72 x 15.73 24.00 x 12.87 x 15.08 25.75 x 6.25 14.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 400) (610 x 327 x 383) (654 x 159) (358) (489) (184) (533 x 213)N241215FHLWT* 26.95 x 13.72 x 16.73 24.00 x 12.87 x 16.08 25.75 x 6.25 15.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 425) (610 x 327 x 408) (654 x 159) (383) (489) (184) (533 x 213)N241216FHLWT 26.95 x 13.72 x 17.73 24.00 x 12.87 x 17.08 25.75 x 6.25 16.08 19.25 7.25 21.00 x 8.37 26 lbs. BP-2412(685 x 348 x 450) (610 x 327 x 434) (654 x 159) (408) (489) (184) (533 x 213)N241217FHLWT* 26.95 x 13.72 x 18.73 24.00 x 12.87 x 18.08 25.75 x 6.25 17.08 19.25 7.25 21.00 x 8.37 26 lbs. BP-2412(685 x 348 x 476) (610 x 327 x 459) (654 x 159) (434) (489) (184) (533 x 213)N241218FHLWT* 26.95 x 13.72 x 19.73 24.00 x 12.87 x 19.08 25.75 x 6.25 18.08 19.25 7.25 21.00 x 8.37 26 lbs. BP-2412(685 x 348 x 501) (610 x 327 x 485) (654 x 159) (459) (489) (184) (533 x 213)N241219FHLWT* 26.95 x 13.72 x 20.79 24.00 x 12.87 x 20.08 25.75 x 6.25 19.08 19.25 7.25 21.00 x 8.37 27 lbs. BP-2412(685 x 348 x 527) (610 x 327 x 510) (654 x 159) (485) (489) (184) (533 x 213)N241220FHLWT* 26.95 x 13.72 x 21.73 24.00 x 12.87 x 21.08 25.75 x 6.25 20.08 19.25 7.25 21.00 x 8.37 32 lbs. BP-2412(685 x 348 x 552) (610 x 327 x 535) (654 x 159) (510) (489) (184) (533 x 213)CONTROLENCLOSURES*Available as made to order.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com260
Control <strong>Enclosures</strong> Type 4X “FHLWT” Configuration Technical ChartsCONTROLENCLOSURESControl <strong>Enclosures</strong> Type 4X - “FHLWT” Configuration Dimensions (continued)CATALOGNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K LENCLOSURE OPENINGM X NENCLOSUREWEIGHTPANELNUMBERN24208FHLWT 27.00 x 21.24 x 9.90 24.05 x 20.39 x 9.25 25.75 x 14.00 8.25 19.25 15.25 21.25 x 16.00 32 lbs. BP-2420(686 x 539 x 252) (611 x 518 x 235) (654 x 356) (209) (489) (387) (540 x 406)N242010FHLWT* 27.00 x 21.24 x 11.90 24.05 x 20.39 x 11.25 25.75 x 14.00 8.25 19.25 15.25 21.25 x 16.00 37 lbs. BP-2420(686 x 539 x 302) (611 x 518 x 286) (654 x 356) (209) (489) (387) (540 x 406)N242410FHLWT 27.00 x 25.24 x 11.90 24.05 x 24.39 x 11.25 25.75 x 17.87 10.25 19.25 19.25 21.25 x 20.00 42 lbs. BP-2424(686 x 641 x 302) (611 x 619 x 286) (654 x 454) (260) (489) (489) (540 x 508)N242412FHLWT* 27.00 x 25.24 x 13.90 24.05 x 24.39 x 13.25 25.75 x 17.87 12.25 19.25 19.25 21.25 x 20.00 43 lbs. BP-2424(686 x 641 x 353) (611 x 619 x 336) (654 x 454) (311) (489) (489) (540 x 508)N30206FHLWT 32.86 x 20.99 x 7.89 29.90 x 20.14 x 7.23 30.75 x 14.25 6.23 25.25 15.25 27.00 x 16.50 34 lbs. BP-3020(835 x 533 x 200) (760 x 511 x 184) (806 x 362) (158) (641) (387) (686 x 419)N30208FHLWT 32.86 x 20.99 x 9.89 29.90 x 20.14 x 9.23 31.75 x 14.25 8.23 25.25 15.25 27.00 x 16.50 36 lbs. BP-3020(835 x 533 x 251) (760 x 511 x 234) (806 x 362) (209) (641) (387) (686 x 419)N302010FHLWT 32.86 x 20.99 x 11.89 29.90 x 20.14 x 11.23 31.75 x 14.25 10.23 25.25 15.25 27.00 x 16.50 39 lbs. BP-3020(835 x 533 x 302) (760 x 511 x 285) (806 x 362) (260) (641) (387) (686 x 419)N302011FHLWT* 32.86 x 20.99 x 12.89 29.90 x 20.14 x 12.23 31.75 x 14.25 11.23 25.25 15.25 27.00 x 16.50 48 lbs. BP-3020(835 x 533 x 327) (760 x 511 x 311) (806 x 362) (285) (641) (387) (686 x 419)N302012FHLWT 32.86 x 20.99 x 13.89 29.90 x 20.14 x 13.23 31.75 x 14.25 12.23 25.25 15.25 27.00 x 16.50 48 lbs. BP-3020(835 x 533 x 353) (760 x 511 x 336) (806 x 362) (311) (641) (387) (686 x 419)N302013FHLWT* 32.86 x 20.99 x 14.89 29.90 x 20.14 x 14.23 31.75 x 14.25 13.23 25.25 15.25 27.00 x 16.50 48 lbs. BP-3020(835 x 533 x 378) (760 x 511 x 361) (806 x 362) (336) (641) (387) (686 x 419)N302014FHLWT 32.86 x 20.99 x 15.89 29.90 x 20.14 x 15.23 31.75 x 14.25 14.23 25.25 15.25 27.00 x 16.50 49 lbs. BP-3020(835 x 533 x 404) (760 x 511 x 387) (806 x 362) (361) (641) (387) (686 x 419)N30247FHLWT 33.41 x 26.32 x 8.81 30.46 x 25.47 x 8.12 32.25 x 18.50 7.12 25.25 19.25 27.38 x 21.25 45 lbs. BP-3024(849 x 668 x 224) (774 x 647 x 206) (819 x 470) (181) (641) (489) (695 x 540)N302410FHLWT 33.41 x 26.32 x 11.95 30.46 x 25.47 x 11.27 32.25 x 18.50 10.27 25.25 19.25 27.38 x 21.25 50 lbs. BP-3024(849 x 668 x 304) (774 x 647 x 286) (819 x 470) (261) (641) (489) (695 x 540)N302412FHLWT 33.41 x 26.32 x 13.79 30.46 x 25.47 x 13.10 32.25 x 18.50 12.1 25.25 19.25 27.38 x 21.25 54 lbs. BP-3024(849 x 668 x 350) (774 x 647 x 333) (819 x 470) (307) (641) (489) (695 x 540)N302413FHLWT* 33.41 x 26.32 x 14.79 30.46 x 25.47 x 14.10 32.25 x 18.50 13.1 25.25 19.25 27.38 x 21.25 55 lbs. BP-3024(849 x 668 x 376) (774 x 647 x 358) (819 x 470) (333) (641) (489) (695 x 540)N302414FHLWT 33.41 x 26.32 x 15.79 30.46 x 25.47 x 15.10 32.25 x 18.50 14.1 25.25 19.25 27.38 x 21.25 56 lbs. BP-3024(849 x 668 x 401) (774 x 647 x 384) (819 x 470) (358) (641) (489) (695 x 540)N302415FHLWT* 33.41 x 26.32 x 16.79 30.46 x 25.47 x 16.10 32.25 x 18.50 15.1 25.25 19.25 27.38 x 21.25 58 lbs. BP-3024(849 x 668 x 426) (774 x 647 x 409) (819 x 470) (384) (641) (489) (695 x 540)N302416FHLWT 33.41 x 26.32 x 17.79 30.46 x 25.47 x 17.10 32.25 x 18.50 16.1 25.25 19.25 27.38 x 21.25 62 lbs. BP-3024(849 x 668 x 452) (774 x 647 x 434) (819 x 470) (409) (641) (489) (695 x 540)N302417FHLWT* 33.41 x 26.32 x 18.79 30.46 x 25.47 x 18.10 32.25 x 18.50 17.1 25.25 19.25 27.38 x 21.25 63 lbs. BP-3024(849 x 668 x 477) (774 x 647 x 460) (819 x 470) (434) (641) (489) (695 x 540)N302418FHLWT* 33.41 x 26.32 x 19.79 30.46 x 25.47 x 19.10 32.25 x 18.50 18.1 25.25 19.25 27.38 x 21.25 64 lbs. BP-3024(849 x 668 x 503) (774 x 647 x 485) (819 x 470) (460) (641) (489) (695 x 540)N302419FHLWT* 33.41 x 26.32 x 20.79 30.46 x 25.47 x 20.10 32.25 x 18.50 19.1 25.25 19.25 27.38 x 21.25 65 lbs. BP-3024(849 x 668 x 528) (774 x 647 x 511) (819 x 470) (485) (641) (489) (695 x 540)N302421FHLWT* 33.41 x 26.32 x 21.79 30.46 x 25.47 x 21.10 32.25 x 18.50 20.1 25.25 19.25 27.38 x 21.25 66 lbs. BP-3024(849 x 668 x 553) (774 x 647 x 536) (819 x 470) (511) (641) (489) (695 x 540)N302422FHLWT 33.41 x 26.32 x 22.79 30.46 x 25.47 x 21.10 32.25 x 18.50 21.1 25.25 19.25 27.38 x 21.25 67 lbs. BP-3024(849 x 668 x 579) (774 x 647 x 536) (819 x 470) (536) (641) (489) (695 x 540)N36308FHLWT 39.31 x 32.50 x 10.05 36.31 x 31.69 x 9.36 38.13 x 23.88 8.36 31.25 25.25 33.25 x 27.25 75 lbs. BP-3630(999 x 826 x 255) (922 x 805 x 238) (968 x 606) (212) (794) (641) (845 x 692)N363010FHLWT 39.31 x 32.50 x 12.05 36.31 x 31.69 x 11.36 38.13 x 23.88 10.36 31.25 25.25 33.25 x 27.25 78 lbs. BP-3630(999 x 826 x 306) (922 x 805 x 289) (968 x 606) (263) (794) (641) (845 x 692)N363012FHLWT 39.31 x 32.50 x 14.05 36.31 x 31.69 x 13.36 38.13 x 23.88 12.36 31.25 25.25 33.25 x 27.25 81 lbs. BP-3630(999 x 826 x 357) (922 x 805 x 339) (968 x 606) (314) (794) (641) (845 x 692)N363013FHLWT* 39.31 x 32.50 x 15.08 36.31 x 31.69 x 14.39 38.13 x 23.88 13.39 31.25 25.25 33.25 x 27.25 85 lbs. BP-3630(999 x 826 x 383) (922 x 805 x 366) (968 x 606) (340) (794) (641) (845 x 692)N363014FHLWT* 39.31 x 32.50 x 16.08 36.31 x 31.69 x 15.39 38.13 x 23.88 14.39 31.25 25.25 33.25 x 27.25 87 lbs. BP-3630(999 x 826 x 408) (922 x 805 x 391) (968 x 606) (366) (794) (641) (845 x 692)*Available as made to order.261<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Control <strong>Enclosures</strong> Type 4X “FHLWT” Configuration Technical Charts & DrawingsWFDNumber of LatchesHEABAMJAKHWT WT FHLWTSTAINLESS LIFT OFF FIBERGLASSSTEEL COVER HINGEHINGEN1610* 2 4 2N2016 2 4 2N2412 2 4 2N2420 4 6 4N2424 4 6 4N3020 5 6 5N3024 5 8 5N3630 5 8 5N4836 10 14 10*N1610 has no padlock hasp featureB<strong>SE</strong>CTION B-BNCBL<strong>SE</strong>CTION A-ANOTE: Mounting hole dimension is .50 inches.Optional back panels available in various materials. See Accessories section.CONTROLENCLOSURESControl <strong>Enclosures</strong> Type 4X - “FHLWT” Configuration Dimensions (continued)CATALOG OVERALL INSIDE MOUNTING ENCLOSURE OPENING ENCLOSURE PANELNUMBER H X W X D A X B X C E X F J K L M X N WEIGHT NUMBERN363015FHLWT 31 x 32.50 x 17.08 36.31 x 31.69 x 16.39 38.13 x 23.88 15.39 31.25 25.25 33.25 x 27.25 88 lbs. BP-3630(999 x 826 x 434) (922 x 805 x 416) (968 x 606) (391) (794) (641) (845 x 692)N363016FHLWT 39.31 x 32.50 x 18.08 36.31 x 31.69 x 17.39 38.13 x 23.88 16.39 31.25 25.25 33.25 x 27.25 89 lbs. BP-3630(999 x 826 x 459) (922 x 805 x 442) (968 x 606) (416) (794) (641) (845 x 692)N363017FHLWT* 39.31 x 32.50 x 19.08 36.31 x 31.69 x 18.39 38.13 x 23.88 17.39 31.25 25.25 33.25 x 27.25 90 lbs. BP-3630(999 x 826 x 485) (922 x 805 x 467) (968 x 606) (442) (794) (641) (845 x 692)N363018FHLWT* 39.31 x 32.50 x 20.08 36.31 x 31.69 x 19.39 38.13 x 23.88 18.39 31.25 25.25 33.25 x 27.25 91 lbs. BP-3630(999 x 826 x 510) (922 x 805 x 493) (968 x 606) (467) (794) (641) (845 x 692)N363019FHLWT* 39.31 x 32.50 x 21.08 36.31 x 31.69 x 20.39 38.13 x 23.88 19.39 31.25 25.25 33.25 x 27.25 92 lbs. BP-3630(999 x 826 x 535) (922 x 805 x 518) (968 x 606) (492) (794) (641) (845 x 692)N363020FHLWT* 39.31 x 32.50 x 22.08 36.31 x 31.69 x 21.39 38.13 x 23.88 20.39 31.25 25.25 33.25 x 27.25 93 lbs. BP-3630(999 x 826 x 561) (922 x 805 x 543) (968 x 606) (518) (794) (641) (845 x 692)N363021FHLWT* 39.31 x 32.50 x 23.08 36.31 x 31.69 x 22.39 38.13 x 23.88 21.39 31.25 25.25 33.25 x 27.25 94 lbs. BP-3630(999 x 826 x 586) (922 x 805 x 569) (968 x 606) (543) (794) (641) (845 x 692)N363022FHLWT* 39.31 x 32.50 x 24.08 36.31 x 31.69 x 23.39 38.13 x 23.88 22.39 31.25 25.25 33.25 x 27.25 95 lbs. BP-3630(999 x 826 x 612) (922 x 805 x 594) (968 x 606) (569) (794) (641) (845 x 692)N363023FHLWT 39.31 x 32.50 x 25.08 36.31 x 31.69 x 24.39 38.13 x 23.88 23.39 31.25 25.25 33.25 x 27.25 96 lbs. BP-3630(999 x 826 x 637) (922 x 805 x 620) (968 x 606) (594) (794) (641) (845 x 692)N363613FHLWT* 39.50 x 36.50 x 14.56 36.25 x 36.25 x 13.88 38.25 x 28.50 12.87 29 31 32.00 x 32.00 88 lbs. BP-3636(1003 x 927 x 370) (921 x 921 x 352) (972 x 724) (327) (737) (787) (813 x 813)*Available as made to order.All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com262
Control <strong>Enclosures</strong> Type 12NCONTROLENCLOSURESLarge control enclosures are usedin a variety of applicationsinvolving diverse environmentalconditions. Althoughfrequently used withelectrical controls, theenclosure is often used witha combination of electrical,pneumatic or hydrauliccontrol, all packagedwithin one enclosure.Ample space and a rangeof depths make <strong>Stahlin</strong>’sControl enclosures afrequent product of choice.Indoor applications differ from outdoor applications and therefore Type12 enclosures are built to meet rugged indoor constructionrequirements. <strong>Stahlin</strong>’s Control <strong>Enclosures</strong> Type 12 are designed toresist entry by spraying oil, water and non corrosive liquids & coolants,and to protect against ingress of flying dust, lint and fibers.Ordering Information - Deriving <strong>Catalog</strong> NumbersFamily ID Size ID Depth ID EXAMPLEN 1610 * “N16107”* Depth is offered in various increments. See following charts for exact sizes.Control <strong>Enclosures</strong> Type 12 - Inside DimensionsSize ID H x W x D Optional Panel #N2016 20 x 16 x various BP2016N2020 20 x 20 x various BP2020N2412 24 x 12 x various BP2412N2420 24 x 20 x various BP2420N2424 24 x 24 x various BP2424N3020 30 x 20 x various BP3020N3024 30 x 24 x various BP3024N3630 36 x 30 x various BP3630N3636 36 x 36 x various BP3636Optional back panels available in various materials. See page 331Control <strong>Enclosures</strong> Type 12 - ConfigurationsConfigurationIDType 12 is the “default”product when no suffix is usedDESCRIPTIONStainless steel hinged, latch down coverControl <strong>Enclosures</strong> Type 12 Shared CharacteristicsConstructionMaterialGasketStainless Steel HardwareTwistlock LatchesMounting BossesMetal InsertsIntegral Mounting FeetRigid Side WallsColor/FinishPhysical Characteristics<strong>Non</strong> corrosiveDust-tightImpact resistant<strong>Non</strong> ConductiveLight weightUV resistantWorkable materialEasy maintenancePleasing aestheticsIndustry StandardsUL/cUL 50NEMA 250CSA Std C22.2Temperature RangeFlammability RatingWindow flammabilitySelf extinguishingChemical ResistanceHot compression molded fiberglassreinforced polyester, hand layup FRPPoured polyurethane seamlessgasket provides watertight, dust-tightenvironmental seal<strong>300</strong> Series stainless used on all hardwareEase of entry into enclosurePanel mounting capability for fixedrear panelAll bosses utilize threaded brass insertsaccepting 10-32 screwsEase of installation on all wall mountproductsExcellent mechanical strength forcomponent mountingSmooth surface, no color variations,swirls, or color pockets, no voids.Stands up to an exceptionally broadrange of chemical exposuresResults in an environmentally sealed,environmentally sound spaceResilient material with high impactresistanceDouble insulated material. No incidentalelectrical contactSolid construction in a lightweightdesignMinimizes the affects of sunlightCuts, drills, punches, and saws withease and accuracyScratches and gouges can be restoredwith a petroleum jelly productSmooth lines, soft colors easily blendinto customer’s design conceptsFile E64358Type 1, 12 as designatedType 1, 12 as designatedFile LR069014Type 1, 12 as designated(-40°F to +250°F) (-40°C to +130°C)UL94-5VUL94V-0<strong>Non</strong>-flame propagatingFull chemical resistance charts listed inappendix263<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“Control <strong>Enclosures</strong> Type 12” ConfigurationsType 12Hinged, latch down coverDesign Features● Rigid body construction and watertight seal● Memory retaining polyurethane gasketing● Integral mounting feet for ease of installation● Molded in panel mounting inserts● Special panel configurations availableincluding dead front panels● Built in padlock haspN24208<strong>Stahlin</strong> <strong>Product</strong> ApplicationsHydroPro, Inc is a manufacturer of water purificationequipment. For obvious reasons, the cleanliness ofthe assembly provides a direct reflection on thissanitary process. From layout to wiring, HydroProoffers a top quality installation that personifies aclean and organized approach.CONTROLENCLOSURESWhile the system has many complex elementsworking in harmony, from conduits to filters tocontrollers, the <strong>Stahlin</strong> <strong>Enclosures</strong> was chosen asthe central control housing since it is a naturalenvironmentally safe product. The soft edgedesign and blended Glacier Gray color make aperfect centerpiece fit for the operation of thisunique product.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com264
Technical Specifications - Control <strong>Enclosures</strong> Type 1212“Type 12” configuration - Stainless steel hinged, latch down coverNType 12 ConstructionMaterialGasketStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyester,hand layup FRPPoured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass insertsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisCONTROLENCLOSURESN24208NOTES:Type 12Industry StandardsUL/cUL 50 File E64358 Type 1, 12NEMA 250 Type 1, 12CSA Std C22.2 File LR069014 Type 1, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixType 12 AccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 331Carbon Steel BP__CS pg. 331Fiberglass BP__FG pg. 331Stainless Steel BP__SS pg. 331Special AccessoriesVent pg. 323Louver pg. 325Assorted hubs and cord grips pg. 327, 328Vapor capsule pg. 326Type 12Modifications See Special ModRight Modification pg 315 - 322ORDERING INFODoor brace pg. 336Grounding studs pg. 339Removable dead front panels pg. 333Molded in color pg. 315 - 322Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom windows pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322265<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Control <strong>Enclosures</strong> Type 12 Technical ChartsControl <strong>Enclosures</strong> Type 12 DimensionsCATALOGNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K LENCLOSURE OPENINGM X NENCLOSUREWEIGHTPANELNUMBERN16107 18.75 x 10.96 x 9.03 15.92 x 10.27 x 8.53 17.50 x 7.00 7.8 12 7.5 13.14 x 6.00 12 lbs. BP-1610(476 x 278 x 229) (404 x 261 x 217) (444 x 178) (198) (305) (191) (334 x 152)N20166 22.75 x 16.87 x 7.77 19.70 x 16.04 x 7.24 21.50 x 10.12 6.26 15.25 11.25 16.75 x 12.19 17 lbs. BP-2016(578 x 429 x 197) (500 x 407 x 184) (546 x 257) (159) (387) (286) (425 x 310)N20168 22.75 x 16.87 x 9.77 19.70 x 16.04 x 9.24 21.50 x 10.12 8.26 15.25 11.25 16.75 x 12.19 22 lbs. BP-2016(578 x 429 x 248) (500 x 407 x 235) (546 x 257) (210) (387) (286) (425 x 310)N201610 22.75 x 16.87 x 11.77 19.70 x 16.04 x 11.24 21.50 x 10.12 10.26 15.25 11.25 16.75 x 12.19 23 lbs. BP-2016(578 x 429 x 299) (500 x 407 x 286) (546 x 257) (261) (387) (286) (425 x 310)N201611* 22.75 x 16.87 x 12.77 19.70 x 16.04 x 12.26 21.50 x 10.12 11.26 15.25 11.25 16.75 x 12.19 23 lbs. BP-2016(578 x 429 x 324 (500 x 407 x 311) (546 x 257) (286) (387) (286) (425 x 310)N201612 22.75 x 16.87 x 13.77 19.70 x 16.04 x 13.24 21.50 x 10.12 12.26 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 350) (500 x 407 x 336) (546 x 257) (312) (387) (286) (425 x 310)N201613* 22.75 x 16.87 x 14.52 19.70 x 16.04 x 13.99 21.50 x 10.12 13.01 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 369) (500 x 407 x 355) (546 x 257) (331) (387) (286) (425 x 310)N201614* 22.75 x 16.87 x 15.52 19.70 x 16.04 x 14.99 21.50 x 10.12 14.01 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 394) (500 x 407 x 381) (546 x 257) (356) (387) (286) (425 x 310)N201615* 22.75 x 16.87 x 16.52 19.70 x 16.04 x 15.99 21.50 x 10.12 15.01 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 420) (500 x 407 x 406) (546 x 257) (381) (387) (286) (425 x 310)N201616 22.75 x 16.87 x 17.52 19.70 x 16.04 x 16.99 21.50 x 10.12 16.01 15.25 11.25 16.75 x 12.19 25 lbs. BP-2016(578 x 429 x 445) (500 x 407 x 432) (546 x 257) (407) (387) (286) (425 x 310)N201617* 22.75 x 16.87 x 18.52 19.70 x 16.04 x 17.99 21.50 x 10.12 17.01 15.25 11.25 16.75 x 12.19 25 lbs. BP-2016(578 x 429 x 470) (500 x 407 x 457) (546 x 257) (432) (387) (286) (425 x 310)N201618* 22.75 x 16.87 x 19.52 19.70 x 16.04 x 18.99 21.50 x 10.12 18.01 15.25 11.25 16.75 x 12.19 25 lbs. BP-2016(578 x 429 x 496) (500 x 407 x 482) (546 x 257) (458) (387) (286) (425 x 310)N201619 22.75 x 16.87 x 20.52 19.70 x 16.04 x 19.99 21.50 x 10.12 19.01 15.25 11.25 16.75 x 12.19 27 lbs. BP-2016(578 x 429 x 521) (500 x 407 x 508) (546 x 257) (483) (387) (286) (425 x 310)N20208* 23.50 x 20.50 x 9.69 20.25 x 20.25 x 8.88 22.25 x 14.50 7.88 15.25 15.25 17.00 x 16.00 26 lbs. BP-2020(597 x 521 x 246) (514 x 514 x 225) (565 x 368) (200) ( 387) ( 387) (432 x 406)N202012* 23.50 x 20.50 x 13.69 20.25 x 20.25 x 11.88 22.25 x 14.50 11.88 15.25 15.25 17.00 x 16.00 28 lbs. BP-2020(597 x 521 x 348) (514 x 514 x 302) (565 x 368) (302) ( 387) ( 387) (432 x 406)N24126 26.95 x 13.72 x 7.98 24.00 x 12.87 x 7.33 25.75 x 6.25 6.33 19.25 7.25 21.00 x 8.37 21 lbs. BP-2412(685 x 348 x 203) (610 x 327 x 186) (654 x 159) (161) (489) (184) (533 x 213)N241210 26.95 x 13.72 x 11.99 24.00 x 12.87 x 11.33 25.75 x 6.25 10.33 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 304) (610 x 327 x 288) (654 x 159) (262) (489) (184) (533 x 213)N241211* 26.95 x 13.72 x 12.73 24.00 x 12.87 x 12.08 25.75 x 6.25 11.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 323) (610 x 327 x 307) (654 x 159) (281) (489) (184) (533 x 213)N241212* 26.95 x 13.72 x 13.73 24.00 x 12.87 x 13.08 25.75 x 6.25 12.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 349) (610 x 327 x 332) (654 x 159) (307) (489) (184) (533 x 213)N241213* 26.95 x 13.72 x 14.73 24.00 x 12.87 x 14.08 25.75 x 6.25 13.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 374) (610 x 327 x 358) (654 x 159) (332) (489) (184) (533 x 213)N241214* 26.95 x 13.72 x 15.73 24.00 x 12.87 x 15.08 25.75 x 6.25 14.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 400) (610 x 327 x 383) (654 x 159) (358) (489) (184) (533 x 213)N241215* 26.95 x 13.72 x 16.73 24.00 x 12.87 x 16.08 25.75 x 6.25 15.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 425) (610 x 327 x 408) (654 x 159) (383) (489) (184) (533 x 213)N241216* 26.95 x 13.72 x 17.73 24.00 x 12.87 x 17.08 25.75 x 6.25 16.08 19.25 7.25 21.00 x 8.37 26 lbs. BP-2412(685 x 348 x 450) (610 x 327 x 434) (654 x 159) (408) (489) (184) (533 x 213)N241217* 26.95 x 13.72 x 18.73 24.00 x 12.87 x 18.08 25.75 x 6.25 17.08 19.25 7.25 21.00 x 8.37 26 lbs. BP-2412(685 x 348 x 476) (610 x 327 x 459) (654 x 159) (434) (489) (184) (533 x 213)N241218* 26.95 x 13.72 x 19.73 24.00 x 12.87 x 19.08 25.75 x 6.25 18.08 19.25 7.25 21.00 x 8.37 26 lbs. BP-2412(685 x 348 x 501) (610 x 327 x 485) (654 x 159) (459) (489) (184) (533 x 213)N241219* 26.95 x 13.72 x 20.79 24.00 x 12.87 x 20.08 25.75 x 6.25 19.08 19.25 7.25 21.00 x 8.37 27 lbs. BP-2412(685 x 348 x 527) (610 x 327 x 510) (654 x 159) (485) (489) (184) (533 x 213)N241220 26.95 x 13.72 x 21.73 24.00 x 12.87 x 21.08 25.75 x 6.25 20.08 19.25 7.25 21.00 x 8.37 32 lbs. BP-2412(685 x 348 x 552) (610 x 327 x 535) (654 x 159) (510) (489) (184) (533 x 213)*Available as made to order.CONTROLENCLOSURES<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com266
Control <strong>Enclosures</strong> Type 12 Technical ChartsCONTROLENCLOSURESControl <strong>Enclosures</strong> Type 12 Dimensions (continued)CATALOGNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K LENCLOSURE OPENINGM X NENCLOSUREWEIGHTPANELNUMBERN24208 27.00 x 21.24 x 9.90 24.05 x 20.39 x 9.25 25.75 x 14.00 8.25 19.25 15.25 21.25 x 16.00 32 lbs. BP-2420(686 x 539 x 252) (611 x 518 x 235) (654 x 356) (209) (489) (387) (540 x 406)N242010* 27.00 x 21.24 x 11.90 24.05 x 20.39 x 11.25 25.75 x 14.00 8.25 19.25 15.25 21.25 x 16.00 37 lbs. BP-2420(686 x 539 x 302) (611 x 518 x 286) (654 x 356) (209) (489) (387) (540 x 406)N242410 27.00 x 25.24 x 11.90 24.05 x 24.39 x 11.25 25.75 x 17.87 10.25 19.25 19.25 21.25 x 20.00 42 lbs. BP-2424(686 x 641 x 302) (611 x 619 x 286) (654 x 454) (260) (489) (489) (540 x 508)N242412 27.00 x 25.24 x 13.90 24.05 x 24.39 x 13.25 25.75 x 17.87 12.25 19.25 19.25 21.25 x 20.00 43 lbs. BP-2424(686 x 641 x 353) (611 x 619 x 336) (654 x 454) (311) (489) (489) (540 x 508)N30206 32.86 x 20.99 x 7.89 29.90 x 20.14 x 7.23 30.75 x 14.25 6.23 25.25 15.25 27.00 x 16.50 34 lbs. BP-3020(835 x 533 x 200) (760 x 511 x 184) (806 x 362) (158) (641) (387) (686 x 419)N30208 32.86 x 20.99 x 9.89 29.90 x 20.14 x 9.23 31.75 x 14.25 8.23 25.25 15.25 27.00 x 16.50 36 lbs. BP-3020(835 x 533 x 251) (760 x 511 x 234) (806 x 362) (209) (641) (387) (686 x 419)N302010 32.86 x 20.99 x 11.89 29.90 x 20.14 x 11.23 31.75 x 14.25 10.23 25.25 15.25 27.00 x 16.50 39 lbs. BP-3020(835 x 533 x 302) (760 x 511 x 285) (806 x 362) (260) (641) (387) (686 x 419)N302011* 32.86 x 20.99 x 12.89 29.90 x 20.14 x 12.23 31.75 x 14.25 11.23 25.25 15.25 27.00 x 16.50 48 lbs. BP-3020(835 x 533 x 327) (760 x 511 x 311) (806 x 362) (285) (641) (387) (686 x 419)N302012 32.86 x 20.99 x 13.89 29.90 x 20.14 x 13.23 31.75 x 14.25 12.23 25.25 15.25 27.00 x 16.50 48 lbs. BP-3020(835 x 533 x 353) (760 x 511 x 336) (806 x 362) (311) (641) (387) (686 x 419)N302013* 32.86 x 20.99 x 14.89 29.90 x 20.14 x 14.23 31.75 x 14.25 13.23 25.25 15.25 27.00 x 16.50 48 lbs. BP-3020(835 x 533 x 378) (760 x 511 x 361) (806 x 362) (336) (641) (387) (686 x 419)N302014 32.86 x 20.99 x 15.89 29.90 x 20.14 x 15.23 31.75 x 14.25 14.23 25.25 15.25 27.00 x 16.50 49 lbs. BP-3020(835 x 533 x 404) (760 x 511 x 387) (806 x 362) (361) (641) (387) (686 x 419)N30247 33.41 x 26.32 x 8.81 30.46 x 25.47 x 8.12 32.25 x 18.50 7.12 25.25 19.25 27.38 x 21.25 45 lbs. BP-3024(849 x 668 x 224) (774 x 647 x 206) (819 x 470) (181) (641) (489) (695 x 540)N302410 33.41 x 26.32 x 11.95 30.46 x 25.47 x 11.27 32.25 x 18.50 10.27 25.25 19.25 27.38 x 21.25 50 lbs. BP-3024(849 x 668 x 304) (774 x 647 x 286) (819 x 470) (261) (641) (489) (695 x 540)N302412 33.41 x 26.32 x 13.79 30.46 x 25.47 x 13.10 32.25 x 18.50 12.1 25.25 19.25 27.38 x 21.25 54 lbs. BP-3024(849 x 668 x 350) (774 x 647 x 333) (819 x 470) (307) (641) (489) (695 x 540)N302413* 33.41 x 26.32 x 14.79 30.46 x 25.47 x 14.10 32.25 x 18.50 13.1 25.25 19.25 27.38 x 21.25 55 lbs. BP-3024(849 x 668 x 376) (774 x 647 x 358) (819 x 470) (333) (641) (489) (695 x 540)N302414 33.41 x 26.32 x 15.79 30.46 x 25.47 x 15.10 32.25 x 18.50 14.1 25.25 19.25 27.38 x 21.25 56 lbs. BP-3024(849 x 668 x 401) (774 x 647 x 384) (819 x 470) (358) (641) (489) (695 x 540)N302415* 33.41 x 26.32 x 16.79 30.46 x 25.47 x 16.10 32.25 x 18.50 15.1 25.25 19.25 27.38 x 21.25 58 lbs. BP-3024(849 x 668 x 426) (774 x 647 x 409) (819 x 470) (384) (641) (489) (695 x 540)N302416 33.41 x 26.32 x 17.79 30.46 x 25.47 x 17.10 32.25 x 18.50 16.1 25.25 19.25 27.38 x 21.25 62 lbs. BP-3024(849 x 668 x 452) (774 x 647 x 434) (819 x 470) (409) (641) (489) (695 x 540)N302417* 33.41 x 26.32 x 18.79 30.46 x 25.47 x 18.10 32.25 x 18.50 17.1 25.25 19.25 27.38 x 21.25 63 lbs. BP-3024(849 x 668 x 477) (774 x 647 x 460) (819 x 470) (434) (641) (489) (695 x 540)N302418* 33.41 x 26.32 x 19.79 30.46 x 25.47 x 19.10 32.25 x 18.50 18.1 25.25 19.25 27.38 x 21.25 64 lbs. BP-3024(849 x 668 x 503) (774 x 647 x 485) (819 x 470) (460) (641) (489) (695 x 540)N302419* 33.41 x 26.32 x 20.79 30.46 x 25.47 x 20.10 32.25 x 18.50 19.1 25.25 19.25 27.38 x 21.25 65 lbs. BP-3024(849 x 668 x 528) (774 x 647 x 511) (819 x 470) (485) (641) (489) (695 x 540)N302421* 33.41 x 26.32 x 21.79 30.46 x 25.47 x 21.10 32.25 x 18.50 20.1 25.25 19.25 27.38 x 21.25 66 lbs. BP-3024(849 x 668 x 553) (774 x 647 x 536) (819 x 470) (511) (641) (489) (695 x 540)N302422 33.41 x 26.32 x 22.79 30.46 x 25.47 x 21.10 32.25 x 18.50 21.1 25.25 19.25 27.38 x 21.25 67 lbs. BP-3024(849 x 668 x 579) (774 x 647 x 536) (819 x 470) (536) (641) (489) (695 x 540)N36308 39.31 x 32.50 x 10.05 36.31 x 31.69 x 9.36 38.13 x 23.88 8.36 31.25 25.25 33.25 x 27.25 75 lbs. BP-3630(999 x 826 x 255) (922 x 805 x 238) (968 x 606) (212) (794) (641) (845 x 692)N363010 39.31 x 32.50 x 12.05 36.31 x 31.69 x 11.36 38.13 x 23.88 10.36 31.25 25.25 33.25 x 27.25 78 lbs. BP-3630(999 x 826 x 306) (922 x 805 x 289) (968 x 606) (263) (794) (641) (845 x 692)N363012 39.31 x 32.50 x 14.05 36.31 x 31.69 x 13.36 38.13 x 23.88 12.36 31.25 25.25 33.25 x 27.25 81 lbs. BP-3630(999 x 826 x 357) (922 x 805 x 339) (968 x 606) (314) (794) (641) (845 x 692)N363013* 39.31 x 32.50 x 15.08 36.31 x 31.69 x 14.39 38.13 x 23.88 13.39 31.25 25.25 33.25 x 27.25 85 lbs. BP-3630(999 x 826 x 383) (922 x 805 x 366) (968 x 606) (340) (794) (641) (845 x 692)N363014* 39.31 x 32.50 x 16.08 36.31 x 31.69 x 15.39 38.13 x 23.88 14.39 31.25 25.25 33.25 x 27.25 87 lbs. BP-3630(999 x 826 x 408) (922 x 805 x 391) (968 x 606) (366) (794) (641) (845 x 692)*Available as made to order.267<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Control <strong>Enclosures</strong> Type 12 Technical Charts & DrawingsWHEABFAMJDAKNumber of LatchesN1610* 2N2016 2N2412 2N2420 2N2424 2N3020 2N3024 2N3630 3N4836 3*N1610 has no padlock hasp featureB<strong>SE</strong>CTION B-BNCBL<strong>SE</strong>CTION A-ANOTE: Mounting hole dimension is .50 inches.Optional back panels available in various materials. See Accessories section.CONTROLENCLOSURESControl <strong>Enclosures</strong> Type 12 Dimensions (continued)CATALOG OVERALL INSIDE MOUNTING ENCLOSURE OPENING ENCLOSURE PANELNUMBER H X W X D A X B X C E X F J K L M X N WEIGHT NUMBERN363015* 39.31 x 32.50 x 17.08 36.31 x 31.69 x 16.39 38.13 x 23.88 15.39 31.25 25.25 33.25 x 27.25 88 lbs. BP-3630(999 x 826 x 434) (922 x 805 x 416) (968 x 606) (391) (794) (641) (845 x 692)N363016 39.31 x 32.50 x 18.08 36.31 x 31.69 x 17.39 38.13 x 23.88 16.39 31.25 25.25 33.25 x 27.25 89 lbs. BP-3630(999 x 826 x 459) (922 x 805 x 442) (968 x 606) (416) (794) (641) (845 x 692)N363017* 39.31 x 32.50 x 19.08 36.31 x 31.69 x 18.39 38.13 x 23.88 17.39 31.25 25.25 33.25 x 27.25 90 lbs. BP-3630(999 x 826 x 485) (922 x 805 x 467) (968 x 606) (442) (794) (641) (845 x 692)N363018* 39.31 x 32.50 x 20.08 36.31 x 31.69 x 19.39 38.13 x 23.88 18.39 31.25 25.25 33.25 x 27.25 91 lbs. BP-3630(999 x 826 x 510) (922 x 805 x 493) (968 x 606) (467) (794) (641) (845 x 692)N363019* 39.31 x 32.50 x 21.08 36.31 x 31.69 x 20.39 38.13 x 23.88 19.39 31.25 25.25 33.25 x 27.25 92 lbs. BP-3630(999 x 826 x 535) (922 x 805 x 518) (968 x 606) (492) (794) (641) (845 x 692)N363020* 39.31 x 32.50 x 22.08 36.31 x 31.69 x 21.39 38.13 x 23.88 20.39 31.25 25.25 33.25 x 27.25 93 lbs. BP-3630(999 x 826 x 561) (922 x 805 x 543) (968 x 606) (518) (794) (641) (845 x 692)N363021* 39.31 x 32.50 x 23.08 36.31 x 31.69 x 22.39 38.13 x 23.88 21.39 31.25 25.25 33.25 x 27.25 94 lbs. BP-3630(999 x 826 x 586) (922 x 805 x 569) (968 x 606) (543) (794) (641) (845 x 692)N363022* 39.31 x 32.50 x 24.08 36.31 x 31.69 x 23.39 38.13 x 23.88 22.39 31.25 25.25 33.25 x 27.25 95 lbs. BP-3630(999 x 826 x 612) (922 x 805 x 594) (968 x 606) (569) (794) (641) (845 x 692)N363023 39.31 x 32.50 x 25.08 36.31 x 31.69 x 24.39 38.13 x 23.88 23.39 31.25 25.25 33.25 x 27.25 96 lbs. BP-3630(999 x 826 x 637) (922 x 805 x 620) (968 x 606) (594) (794) (641) (845 x 692)N363613* 39.50 x 36.50 x 14.56 36.25 x 36.25 x 13.88 38.25 x 28.50 12.87 29 31 32.00 x 32.00 88 lbs. BP-3636(1003 x 927 x 370) (921 x 921 x 352) (972 x 724) (327) (737) (787) (813 x 813)*Available as made to order.All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com268
Control <strong>Enclosures</strong> Type 3RNControl <strong>Enclosures</strong> Type 3R Shared CharacteristicsCONTROLENCLOSURESLarge control enclosures areused in a variety ofapplications involving diverseenvironmental conditions.Although the outdoorenvironmental seal of aType 3R enclosure is lesscritical than that of Type 4xby specification, it isdifferentiated by therequired addition of a rainshield. The rain shield is a preventativemeasure taken to insure that water on top acabinet will not be drawn inside as the door is opened. It is also apreventative for the ingress of light falling rain. <strong>Stahlin</strong>’s Type 3Renclosures are built to meet rugged construction requirements and offerprotection against falling, rain & sleet and remain undamaged byexternal ice formation.Ordering Information - Deriving <strong>Catalog</strong> NumbersFamily ID Size ID Depth ID Configuration ID EXAMPLEN 1610 * RT “N16107RT”* Depth is offered in various increments. See following charts for exact sizes.Control <strong>Enclosures</strong> Type 3R - Inside DimensionsSize ID H x W x D Optional Panel #N1610 16 x 10 x various BP1610N2016 20 x 16 x various BP2016N2020 20 x 20 x various BP2020N2412 24 x 12 x various BP2412N2420 24 x 20 x various BP2420N2424 24 x 24 x various BP2424N3020 30 x 20 x various BP3020N3024 30 x 24 x various BP3024N3630 36 x 30 x various BP3630N3636 36 x 36 x various BP3636Optional back panels available in various materials. See page 331.Control <strong>Enclosures</strong> Type 3R - ConfigurationsConfigurationIDDESCRIPTIONRTStainless steel hinged, latched down cover onlyFHLRT Fiberglass hinged, through the door latchesConstructionMaterialGasketStainless Steel HardwareTwistlock LatchesBossesMetal InsertsIntegral Mounting FeetFiberglass HingesRigid Side WallsColor/FinishPhysical Characteristics<strong>Non</strong> corrosiveDust-tightImpact resistant<strong>Non</strong> ConductiveLight weightUV resistantWorkable materialEasy maintenancePleasing aestheticsIndustry StandardsUL/cUL 50NEMA 250CSA Std C22.2Temperature RangeFlammability RatingWindow flammabilitySelf extinguishingChemical ResistanceHot compression molded fiberglassreinforced polyester, hand layup FRPPoured polyurethane seamlessgasket provides watertight, dust-tightenvironmental seal<strong>300</strong> Series stainless used on all hardwareEase of entry into enclosurePanel mounting capability for fixedrear panelAll bosses utilize threaded brass insertsaccepting 10-32 screwsEase of installation on all wall mountproductsAlternate style non metallic hinges availableExcellent mechanical strength forcomponent mountingSmooth surface, no color variations,swirls, or color pockets, no voids.Stands up to an exceptionally broadrange of chemical exposuresResults in an environmentally sealed,environmentally sound spaceResilient material with high impactresistanceDouble insulated material. No incidentalelectrical contactSolid construction in a lightweightdesignMinimizes the affects of sunlightCuts, drills, punches, and saws withease and accuracyScratches and gouges can be restoredwith a petroleum jelly productSmooth lines, soft colors easily blendinto customer’s design conceptsFile E64358Type 1, 3R as designatedType 1, 3R as designatedFile LR069014Type 1 & 3R as designated(-40°F to +250°F) (-40°C to +130°C)UL94-5VUL94V-0<strong>Non</strong>-flame propagatingFull chemical resistance charts listed inappendix269<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“Control <strong>Enclosures</strong> Type 3R” ConfigurationsRTHinged, latch down coverDesign Features● Rainshield provided for water ingress protection● Rigid body construction and watertight seal● Memory retaining polyurethane gasketing● Integral mounting feet for ease of installation● Molded in panel mounting inserts● Special panel configurations available includingdead front panels● Built in padlock haspN242410RTFHLRTFiberglass hinged, through the door latchesDesign Features● Rain shield provided for water ingress protection● Rigid body construction and watertight seal● Fiberglass hinges to maximize corrosion protection● Memory retaining polyurethane gasketing● Integral mounting feet for ease of installation● Molded in panel mounting inserts● Special panel configurations available includingdead front panels● Built in padlock haspN20208FHLRTCONTROLENCLOSURES<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com270
RTTechnical Specifications - Control <strong>Enclosures</strong> Type 3R“RT” configuration - Hinged, latch down coverNRTConstructionMaterialRain ShieldGasketStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyester,hand layup FRPProtection against incidental water ingressPoured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass insertsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisN24248FHLRTNOTES:RTIndustry StandardsUL/cUL 50NEMA 250CSA Std C22.2Temperature RangeFlammability RatingWindow FlammabilitySelf ExtinguishingChemical ResistanceFile E64358 Type 1, 3RType 1, 3RFile LR069014 Type 1, 3R(-40°F to +250°F) (-40°C to +130°C)UL94-5VUL94V-0<strong>Non</strong>-flame propagatingFull chemical resistance charts listed in appendixCONTROLENCLOSURESRT AccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 331Carbon Steel BP__CS pg. 331Fiberglass BP__FG pg. 331Stainless Steel BP__SS pg. 331Special AccessoriesDrain vent pg. 323Louver pg. 325Assorted hubs and cord grips pg. 327, 328Vapor capsule pg. 326RTModifications See Special ModRight Modification pg 315 - 322ORDERING INFODoor brace pg. 336Grounding studs pg. 339Removable dead front panels pg. 333Molded in color pg. 315 - 322Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom windows pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322271<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Control <strong>Enclosures</strong> Type 3R “RT” Configuration Technical ChartsControl <strong>Enclosures</strong> Type 3R - “RT” Configuration DimensionsCATALOGNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K LENCLOSURE OPENINGM X NENCLOSUREWEIGHTPANELNUMBERN16107RT 18.75 x 10.96 x 9.53 15.92 x 10.27 x 8.53 17.50 x 7.00 7.8 12 7.5 13.14 x 6.00 12 lbs. BP-1610(476 x 278 x 242) (404 x 261 x 217) (444 x 178) (198) (305) (191) (334 x 152)N20166RT 22.75 x 16.87 x 8.27 19.70 x 16.04 x 7.24 21.50 x 10.12 6.26 15.25 11.25 16.75 x 12.19 17 lbs. BP-2016(578 x 429 x 210) (500 x 407 x 184) (546 x 257) (159) (387) (286) (425 x 310)N20168RT 22.75 x 16.87 x 10.27 19.70 x 16.04 x 9.24 21.50 x 10.12 8.26 15.25 11.25 16.75 x 12.19 22 lbs. BP-2016(578 x 429 x 261) (500 x 407 x 235) (546 x 257) (210) (387) (286) (425 x 310)N201610RT 22.75 x 16.87 x 12.27 19.70 x 16.04 x 11.24 21.50 x 10.12 10.26 15.25 11.25 16.75 x 12.19 23 lbs. BP-2016(578 x 429 x 312) (500 x 407 x 286) (546 x 257) (261) (387) (286) (425 x 310)N201611RT* 22.75 x 16.87 x 13.27 19.70 x 16.04 x 12.26 21.50 x 10.12 11.26 15.25 11.25 16.75 x 12.19 23 lbs. BP-2016(578 x 429 x 337) (500 x 407 x 311) (546 x 257) (286) (387) (286) (425 x 310)N201612RT 22.75 x 16.87 x 14.27 19.70 x 16.04 x 13.24 21.50 x 10.12 12.26 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 362) (500 x 407 x 336) (546 x 257) (312) (387) (286) (425 x 310)N201613RT* 22.75 x 16.87 x 15.02 19.70 x 16.04 x 13.99 21.50 x 10.12 13.01 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 382) (500 x 407 x 355) (546 x 257) (331) (387) (286) (425 x 310)N201614RT* 22.75 x 16.87 x 16.02 19.70 x 16.04 x 14.99 21.50 x 10.12 14.01 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 407) (500 x 407 x 381) (546 x 257) (356) (387) (286) (425 x 310)N201615RT* 22.75 x 16.87 x 17.02 19.70 x 16.04 x 15.99 21.50 x 10.12 15.01 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 432) (500 x 407 x 406) (546 x 257) (381) (387) (286) (425 x 310)N201616RT 22.75 x 16.87 x 18.02 19.70 x 16.04 x 16.99 21.50 x 10.12 16.01 15.25 11.25 16.75 x 12.19 25 lbs. BP-2016(578 x 429 x 458) (500 x 407 x 432) (546 x 257) (407) (387) (286) (425 x 310)N201617RT* 22.75 x 16.87 x 19.02 19.70 x 16.04 x 17.99 21.50 x 10.12 17.01 15.25 11.25 16.75 x 12.19 25 lbs. BP-2016(578 x 429 x 483) (500 x 407 x 457) (546 x 257) (432) (387) (286) (425 x 310)N201618RT* 22.75 x 16.87 x 20.02 19.70 x 16.04 x 18.99 21.50 x 10.12 18.01 15.25 11.25 16.75 x 12.19 25 lbs. BP-2016(578 x 429 x 509) (500 x 407 x 482) (546 x 257) (458) (387) (286) (425 x 310)N201619RT 22.75 x 16.87 x 21.02 19.70 x 16.04 x 19.99 21.50 x 10.12 19.01 15.25 11.25 16.75 x 12.19 27 lbs. BP-2016(578 x 429 x 534) (500 x 407 x 508) (546 x 257) (483) (387) (286) (425 x 310)N20208 RT* 23.50 x 20.50 x 10.19 20.25 x 20.25 x 8.88 22.25 x 14.50 7.88 15.25 15.25 17.00 x 16.00 26 lbs. BP-2020(597 x 521 x 259) (514 x 514 x 225) (565 x 368) (200) (387) (387) (432 x 406)N202012RT* 23.50 x 20.50 x 14.19 20.25 x 20.25 x 11.88 22.25 x 14.50 11.88 15.25 15.25 17.00 x 16.00 28 lbs. BP-2020(597 x 521 x 360) (514 x 514 x 302) (565 x 368) (302) (387) (387) (432 x 406)N24126 RT 26.95 x 13.72 x 8.48 24.00 x 12.87 x 7.33 25.75 x 6.25 6.33 19.25 7.25 21.00 x 8.37 21 lbs. BP-2412(685 x 348 x 215) (610 x 327 x 186) (654 x 159) (161) (489) (184) (533 x 213)N241210RT 26.95 x 13.72 x 12.49 24.00 x 12.87 x 11.33 25.75 x 6.25 10.33 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 317) (610 x 327 x 288) (654 x 159) (262) (489) (184) (533 x 213)N241211RT* 26.95 x 13.72 x 13.23 24.00 x 12.87 x 12.08 25.75 x 6.25 11.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 336) (610 x 327 x 307) (654 x 159) (281) (489) (184) (533 x 213)N241212RT* 26.95 x 13.72 x 14.23 24.00 x 12.87 x 13.08 25.75 x 6.25 12.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 361) (610 x 327 x 332) (654 x 159) (307) (489) (184) (533 x 213)N241213RT* 26.95 x 13.72 x 15.23 24.00 x 12.87 x 14.08 25.75 x 6.25 13.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 387) (610 x 327 x 358) (654 x 159) (332) (489) (184) (533 x 213)N241214RT* 26.95 x 13.72 x 16.23 24.00 x 12.87 x 15.08 25.75 x 6.25 14.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 412) (610 x 327 x 383) (654 x 159) (358) (489) (184) (533 x 213)N241215RT* 26.95 x 13.72 x 17.23 24.00 x 12.87 x 16.08 25.75 x 6.25 15.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 438) (610 x 327 x 408) (654 x 159) (383) (489) (184) (533 x 213)N241216RT* 26.95 x 13.72 x 18.23 24.00 x 12.87 x 17.08 25.75 x 6.25 16.08 19.25 7.25 21.00 x 8.37 26 lbs. BP-2412(685 x 348 x 463) (610 x 327 x 434) (654 x 159) (408) (489) (184) (533 x 213)N241217RT* 26.95 x 13.72 x 19.23 24.00 x 12.87 x 18.08 25.75 x 6.25 17.08 19.25 7.25 21.00 x 8.37 26 lbs. BP-2412(685 x 348 x 488) (610 x 327 x 459) (654 x 159) (434) (489) (184) (533 x 213)N241218RT* 26.95 x 13.72 x 20.23 24.00 x 12.87 x 19.08 25.75 x 6.25 18.08 19.25 7.25 21.00 x 8.37 26 lbs. BP-2412(685 x 348 x 514) (610 x 327 x 485) (654 x 159) (459) (489) (184) (533 x 213)N241219RT* 26.95 x 13.72 x 21.23 24.00 x 12.87 x 20.08 25.75 x 6.25 19.08 19.25 7.25 21.00 x 8.37 27 lbs. BP-2412(685 x 348 x 539) (610 x 327 x 510) (654 x 159) (485) (489) (184) (533 x 213)N241220RT 26.95 x 13.72 x 22.23 24.00 x 12.87 x 21.08 25.75 x 6.25 20.08 19.25 7.25 21.00 x 8.37 32 lbs. BP-2412(685 x 348 x 564) (610 x 327 x 535) (654 x 159) (510) (489) (184) (533 x 213)CONTROLENCLOSURES*Available as made to order.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com272
Control <strong>Enclosures</strong> Type 3R “RT” Configuration Technical ChartsCONTROLENCLOSURESControl <strong>Enclosures</strong> Type 3R - “RT” Configuration Dimensions (continued)CATALOGNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K LENCLOSURE OPENINGM X NENCLOSUREWEIGHTPANELNUMBERN24208RT 27.00 x 21.24 x 9.90 24.05 x 20.39 x 9.25 25.75 x 14.00 8.25 19.25 15.25 21.25 x 16.00 32 lbs. BP-2420(686 x 539 x 252) (611 x 518 x 235) (654 x 356) (209) (489) (387) (540 x 406)N242010RT* 27.00 x 21.24 x 11.90 24.05 x 20.39 x 11.25 25.75 x 14.00 8.25 19.25 15.25 21.25 x 16.00 37 lbs. BP-2420(686 x 539 x 302) (611 x 518 x 286) (654 x 356) (209) (489) (387) (540 x 406)N242410RT 27.00 x 25.24 x 11.90 24.05 x 24.39 x 11.25 25.75 x 17.87 10.25 19.25 19.25 21.25 x 20.00 42 lbs. BP-2424(686 x 641 x 302) (611 x 619 x 286) (654 x 454) (260) (489) (489) (540 x 508)N242412RT 27.00 x 25.24 x 13.90 24.05 x 24.39 x 13.25 25.75 x 17.87 12.25 19.25 19.25 21.25 x 20.00 43 lbs. BP-2424(686 x 641 x 353) (611 x 619 x 336) (654 x 454) (311) (489) (489) (540 x 508)N30206RT 32.86 x 20.99 x 7.89 29.90 x 20.14 x 7.23 30.75 x 14.25 6.23 25.25 15.25 27.00 x 16.50 34 lbs. BP-3020(835 x 533 x 200) (760 x 511 x 184) (806 x 362) (158) (641) (387) (686 x 419)N30208RT 32.86 x 20.99 x 9.89 29.90 x 20.14 x 9.23 31.75 x 14.25 8.23 25.25 15.25 27.00 x 16.50 36 lbs. BP-3020(835 x 533 x 251) (760 x 511 x 234) (806 x 362) (209) (641) (387) (686 x 419)N302010 RT 32.86 x 20.99 x 11.89 29.90 x 20.14 x 11.23 31.75 x 14.25 10.23 25.25 15.25 27.00 x 16.50 39 lbs. BP-3020(835 x 533 x 302) (760 x 511 x 285) (806 x 362) (260) (641) (387) (686 x 419)N302011RT* 32.86 x 20.99 x 12.89 29.90 x 20.14 x 12.23 31.75 x 14.25 11.23 25.25 15.25 27.00 x 16.50 48 lbs. BP-3020(835 x 533 x 327) (760 x 511 x 311) (806 x 362) (285) (641) (387) (686 x 419)N302012RT 32.86 x 20.99 x 13.89 29.90 x 20.14 x 13.23 31.75 x 14.25 12.23 25.25 15.25 27.00 x 16.50 48 lbs. BP-3020(835 x 533 x 353) (760 x 511 x 336) (806 x 362) (311) (641) (387) (686 x 419)N302013RT* 32.86 x 20.99 x 14.89 29.90 x 20.14 x 14.23 31.75 x 14.25 13.23 25.25 15.25 27.00 x 16.50 48 lbs. BP-3020(835 x 533 x 378) (760 x 511 x 361) (806 x 362) (336) (641) (387) (686 x 419)N302014RT 32.86 x 20.99 x 15.89 29.90 x 20.14 x 15.23 31.75 x 14.25 14.23 25.25 15.25 27.00 x 16.50 49 lbs. BP-3020(835 x 533 x 404) (760 x 511 x 387) (806 x 362) (361) (641) (387) (686 x 419)N30247RT 33.41 x 26.32 x 8.81 30.46 x 25.47 x 8.12 32.25 x 18.50 7.12 25.25 19.25 27.38 x 21.25 45 lbs. BP-3024(849 x 668 x 224) (774 x 647 x 206) (819 x 470) (181) (641) (489) (695 x 540)N302410RT 33.41 x 26.32 x 11.95 30.46 x 25.47 x 11.27 32.25 x 18.50 10.27 25.25 19.25 27.38 x 21.25 50 lbs. BP-3024(849 x 668 x 304) (774 x 647 x 286) (819 x 470) (261) (641) (489) (695 x 540)N302412RT 33.41 x 26.32 x 13.79 30.46 x 25.47 x 13.10 32.25 x 18.50 12.1 25.25 19.25 27.38 x 21.25 54 lbs. BP-3024(849 x 668 x 350) (774 x 647 x 333) (819 x 470) (307) (641) (489) (695 x 540)N302413RT* 33.41 x 26.32 x 14.79 30.46 x 25.47 x 14.10 32.25 x 18.50 13.1 25.25 19.25 27.38 x 21.25 55 lbs. BP-3024(849 x 668 x 376) (774 x 647 x 358) (819 x 470) (333) (641) (489) (695 x 540)N302414RT 33.41 x 26.32 x 15.79 30.46 x 25.47 x 15.10 32.25 x 18.50 14.1 25.25 19.25 27.38 x 21.25 56 lbs. BP-3024(849 x 668 x 401) (774 x 647 x 384) (819 x 470) (358) (641) (489) (695 x 540)N302415RT* 33.41 x 26.32 x 16.79 30.46 x 25.47 x 16.10 32.25 x 18.50 15.1 25.25 19.25 27.38 x 21.25 58 lbs. BP-3024(849 x 668 x 426) (774 x 647 x 409) (819 x 470) (384) (641) (489) (695 x 540)N302416RT 33.41 x 26.32 x 17.79 30.46 x 25.47 x 17.10 32.25 x 18.50 16.1 25.25 19.25 27.38 x 21.25 62 lbs. BP-3024(849 x 668 x 452) (774 x 647 x 434) (819 x 470) (409) (641) (489) (695 x 540)N302417RT* 33.41 x 26.32 x 18.79 30.46 x 25.47 x 18.10 32.25 x 18.50 17.1 25.25 19.25 27.38 x 21.25 63 lbs. BP-3024(849 x 668 x 477) (774 x 647 x 460) (819 x 470) (434) (641) (489) (695 x 540)N302418RT* 33.41 x 26.32 x 19.79 30.46 x 25.47 x 19.10 32.25 x 18.50 18.1 25.25 19.25 27.38 x 21.25 64 lbs. BP-3024(849 x 668 x 503) (774 x 647 x 485) (819 x 470) (460) (641) (489) (695 x 540)N302419RT* 33.41 x 26.32 x 20.79 30.46 x 25.47 x 20.10 32.25 x 18.50 19.1 25.25 19.25 27.38 x 21.25 65 lbs. BP-3024(849 x 668 x 528) (774 x 647 x 511) (819 x 470) (485) (641) (489) (695 x 540)N302421RT* 33.41 x 26.32 x 21.79 30.46 x 25.47 x 21.10 32.25 x 18.50 20.1 25.25 19.25 27.38 x 21.25 66 lbs. BP-3024(849 x 668 x 553) (774 x 647 x 536) (819 x 470) (511) (641) (489) (695 x 540)N302422RT 33.41 x 26.32 x 22.79 30.46 x 25.47 x 21.10 32.25 x 18.50 21.1 25.25 19.25 27.38 x 21.25 67 lbs. BP-3024(849 x 668 x 579) (774 x 647 x 536) (819 x 470) (536) (641) (489) (695 x 540)N36308RT 39.31 x 32.50 x 10.05 36.31 x 31.69 x 9.36 38.13 x 23.88 8.36 31.25 25.25 33.25 x 27.25 75 lbs. BP-3630(999 x 826 x 255) (922 x 805 x 238) (968 x 606) (212) (794) (641) (845 x 692)N363010RT 39.31 x 32.50 x 12.05 36.31 x 31.69 x 11.36 38.13 x 23.88 10.36 31.25 25.25 33.25 x 27.25 78 lbs. BP-3630(999 x 826 x 306) (922 x 805 x 289) (968 x 606) (263) (794) (641) (845 x 692)N363012RT 39.31 x 32.50 x 14.05 36.31 x 31.69 x 13.36 38.13 x 23.88 12.36 31.25 25.25 33.25 x 27.25 81 lbs. BP-3630(999 x 826 x 357) (922 x 805 x 339) (968 x 606) (314) (794) (641) (845 x 692)N363013RT* 39.31 x 32.50 x 15.08 36.31 x 31.69 x 14.39 38.13 x 23.88 13.39 31.25 25.25 33.25 x 27.25 85 lbs. BP-3630(999 x 826 x 383) (922 x 805 x 366) (968 x 606) (340) (794) (641) (845 x 692)N363014RT* 39.31 x 32.50 x 16.08 36.31 x 31.69 x 15.39 38.13 x 23.88 14.39 31.25 25.25 33.25 x 27.25 87 lbs. BP-3630(999 x 826 x 408) (922 x 805 x 391) (968 x 606) (366) (794) (641) (845 x 692)*Available as made to order.273<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Control <strong>Enclosures</strong> Type 3R “RT” Configuration Technical Charts & DrawingsWFDNumber of LatchesHEABAMJAKRTFHLRTSTAINLESS FIBERGLASSSTEEL HINGE ANDHINGE S.S. LATCHN1610* 2 2N2016 2 2N2412 2 2N2420 2 2N2424 2 2N3020 2 2N3024 2 2N3630 3 3N4836 3 3*N1610 has no padlock hasp featureB<strong>SE</strong>CTION B-BNCBL<strong>SE</strong>CTION A-ANOTE: Mounting hole dimension is .50 inches.Optional back panels available in various materials.See Accessories sectioin.CONTROLENCLOSURESControl <strong>Enclosures</strong> Type 3R - “RT” Configuration Dimensions (continued)CATALOG OVERALL INSIDE MOUNTING ENCLOSURE OPENING ENCLOSURE PANELNUMBER H X W X D A X B X C E X F J K L M X N WEIGHT NUMBERN363015RT* 39.31 x 32.50 x 17.58 36.31 x 31.69 x 16.39 38.13 x 23.88 15.39 31.25 25.25 33.25 x 27.25 88 lbs. BP-3630(999 x 826 x 474) (922 x 805 x 416) (968 x 606) (391) (794) (641) (845 x 692)N363016RT 39.31 x 32.50 x 19.58 36.31 x 31.69 x 17.39 38.13 x 23.88 16.39 31.25 25.25 33.25 x 27.25 89 lbs. BP-3630(999 x 826 x 497) (922 x 805 x 442) (968 x 606) (416) (794) (641) (845 x 692)N363017RT* 39.31 x 32.50 x 18.58 36.31 x 31.69 x 18.39 38.13 x 23.88 17.39 31.25 25.25 33.25 x 27.25 90 lbs. BP-3630(999 x 826 x 472) (922 x 805 x 467) (968 x 606) (442) (794) (641) (845 x 692)N363018RT* 39.31 x 32.50 x 20.58 36.31 x 31.69 x 19.39 38.13 x 23.88 18.39 31.25 25.25 33.25 x 27.25 91 lbs. BP-3630(999 x 826 x 523) (922 x 805 x 493) (968 x 606) (467) (794) (641) (845 x 692)N363019RT* 39.31 x 32.50 x 21.58 36.31 x 31.69 x 20.39 38.13 x 23.88 19.39 31.25 25.25 33.25 x 27.25 92 lbs. BP-3630(999 x 826 x 548) (922 x 805 x 518) (968 x 606) (492) (794) (641) (845 x 692)N363020RT* 39.31 x 32.50 x 22.58 36.31 x 31.69 x 21.39 38.13 x 23.88 20.39 31.25 25.25 33.25 x 27.25 93 lbs. BP-3630(999 x 826 x 573) (922 x 805 x 543) (968 x 606) (518) (794) (641) (845 x 692)N363021RT* 39.31 x 32.50 x 23.58 36.31 x 31.69 x 22.39 38.13 x 23.88 21.39 31.25 25.25 33.25 x 27.25 94 lbs. BP-3630(999 x 826 x 599) (922 x 805 x 569) (968 x 606) (543) (794) (641) (845 x 692)N363022RT* 39.31 x 32.50 x 24.58 36.31 x 31.69 x 23.39 38.13 x 23.88 22.39 31.25 25.25 33.25 x 27.25 95 lbs. BP-3630(999 x 826 x 625) (922 x 805 x 594) (968 x 606) (569) (794) (641) (845 x 692)N363023RT 39.31 x 32.50 x 25.58 36.31 x 31.69 x 24.39 38.13 x 23.88 23.39 31.25 25.25 33.25 x 27.25 96 lbs. BP-3630(999 x 826 x 650) (922 x 805 x 620) (968 x 606) (594) (794) (641) (845 x 692)N363613RT* 39.50 x 36.50 x 15.06 36.25 x 36.25 x 13.88 38.25 x 28.50 12.87 29 31 32.00 x 32.00 88 lbs. BP-3636(1003 x 927 x 383) (921 x 921 x 352) (972 x 724) (327) (737) (787) (813 x 813)*Available as made to order.All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com274
Technical Specifications - Control <strong>Enclosures</strong> Type 3R“FHLRT” configuration - Fiberglass hinged, through the door latchesNFHLRT ConstructionMaterialRain ShieldGasket<strong>Non</strong>-<strong>Metallic</strong> HardwareMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyester,hand layup FRPProtection against incidental water ingressPoured polyurethane seamless gasket provides watertight,dust-tight environmental sealFG composite hinge, nylon quarter turn latchPanel mounting capability for fixed rear panelAll bosses utilize threaded brass insertsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisFHLRTIndustry StandardsCONTROLENCLOSURESNOTES:N20168FHLRTFHLRTUL/cUL 50NEMA 250CSA Std C22.2Temperature RangeFlammability RatingWindow FlammabilitySelf ExtinguishingChemical ResistanceAccessoriesFile E64358 Type 1 & 3RType 1 & 3RFile LR069014 Type 1 & 3R(-40°F to +250°F) (-40°C to +130°C)UL94-5VUL94V-0<strong>Non</strong>-flame propagatingFull chemical resistance charts listed in appendixBack PanelsORDERING INFOAluminum BP__AL pg. 331Carbon Steel BP__CS pg. 331Fiberglass BP__FG pg. 331Stainless Steel BP__SS pg. 331Special AccessoriesDrain vent pg. 323Louver pg. 325Assorted hubs and cord grips pg. 327, 328Vapor capsule pg. 326FHLRTModifications See Special ModRight Modification pg 315 - 322ORDERING INFODoor brace pg. 336Grounding studs pg. 339Removable dead front panels pg. 333Molded in color pg. 315 - 322Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom windows pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322275<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Control <strong>Enclosures</strong> Type 3R “FHLRT” Configuration Technical ChartsControl <strong>Enclosures</strong> Type 3R - “FHLRT” Configuration DimensionsCATALOGNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K LENCLOSURE OPENINGM X NENCLOSUREWEIGHTPANELNUMBERN16107FHLRT 18.75 x 10.96 x 9.53 15.92 x 10.27 x 8.53 17.50 x 7.00 7.8 12 7.5 13.14 x 6.00 12 lbs. BP-1610(476 x 278 x 242) (404 x 261 x 217) (444 x 178) (198) (305) (191) (334 x 152)N20166FHLRT 22.75 x 16.87 x 8.27 19.70 x 16.04 x 7.24 21.50 x 10.12 6.26 15.25 11.25 16.75 x 12.19 17 lbs. BP-2016(578 x 429 x 210) (500 x 407 x 184) (546 x 257) (159) (387) (286) (425 x 310)N20168FHLRT 22.75 x 16.87 x 10.27 19.70 x 16.04 x 9.24 21.50 x 10.12 8.26 15.25 11.25 16.75 x 12.19 22 lbs. BP-2016(578 x 429 x 261) (500 x 407 x 235) (546 x 257) (210) (387) (286) (425 x 310)N201610FHLRT 22.75 x 16.87 x 12.27 19.70 x 16.04 x 11.24 21.50 x 10.12 10.26 15.25 11.25 16.75 x 12.19 23 lbs. BP-2016(578 x 429 x 312) (500 x 407 x 286) (546 x 257) (261) (387) (286) (425 x 310)N201611FHLRT* 22.75 x 16.87 x 13.27 19.70 x 16.04 x 12.26 21.50 x 10.12 11.26 15.25 11.25 16.75 x 12.19 23 lbs. BP-2016(578 x 429 x 337) (500 x 407 x 311) (546 x 257) (286) (387) (286) (425 x 310)N201612FHLRT 22.75 x 16.87 x 14.27 19.70 x 16.04 x 13.24 21.50 x 10.12 12.26 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 362) (500 x 407 x 336) (546 x 257) (312) (387) (286) (425 x 310)N201613FHLRT* 22.75 x 16.87 x 15.02 19.70 x 16.04 x 13.99 21.50 x 10.12 13.01 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 382) (500 x 407 x 355) (546 x 257) (331) (387) (286) (425 x 310)N201614FHLRT* 22.75 x 16.87 x 16.02 19.70 x 16.04 x 14.99 21.50 x 10.12 14.01 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 407) (500 x 407 x 381) (546 x 257) (356) (387) (286) (425 x 310)N201615FHLRT* 22.75 x 16.87 x 17.02 19.70 x 16.04 x 15.99 21.50 x 10.12 15.01 15.25 11.25 16.75 x 12.19 24 lbs. BP-2016(578 x 429 x 432) (500 x 407 x 406) (546 x 257) (381) (387) (286) (425 x 310)N201616FHLRT 22.75 x 16.87 x 18.02 19.70 x 16.04 x 16.99 21.50 x 10.12 16.01 15.25 11.25 16.75 x 12.19 25 lbs. BP-2016(578 x 429 x 458) (500 x 407 x 432) (546 x 257) (407) (387) (286) (425 x 310)N201617FHLRT* 22.75 x 16.87 x 19.02 19.70 x 16.04 x 17.99 21.50 x 10.12 17.01 15.25 11.25 16.75 x 12.19 25 lbs. BP-2016(578 x 429 x 483) (500 x 407 x 457) (546 x 257) (432) (387) (286) (425 x 310)N201618FHLRT* 22.75 x 16.87 x 20.02 19.70 x 16.04 x 18.99 21.50 x 10.12 18.01 15.25 11.25 16.75 x 12.19 25 lbs. BP-2016(578 x 429 x 509) (500 x 407 x 482) (546 x 257) (458) (387) (286) (425 x 310)N201619FHLRT 22.75 x 16.87 x 21.02 19.70 x 16.04 x 19.99 21.50 x 10.12 19.01 15.25 11.25 16.75 x 12.19 27 lbs. BP-2016(578 x 429 x 534) (500 x 407 x 508) (546 x 257) (483) (387) (286) (425 x 310)N20208FHLRT* 23.50 x 20.50 x 10.19 20.25 x 20.25 x 8.88 22.25 x 14.50 7.88 15.25 15.25 17.00 x 16.00 26 lbs. BP-2020(597 x 521 x 259) (514 x 514 x 225) (565 x 368) (200) (387) (387) (432 x 406)N202012FHLRT* 23.50 x 20.50 x 14.19 20.25 x 20.25 x 11.88 22.25 x 14.50 11.88 15.25 15.25 17.00 x 16.00 28 lbs. BP-2020(597 x 521 x 360) (514 x 514 x 302) (565 x 368) (302) (387) (387) (432 x 406)N24126FHLRT 26.95 x 13.72 x 8.48 24.00 x 12.87 x 7.33 25.75 x 6.25 6.33 19.25 7.25 21.00 x 8.37 21 lbs. BP-2412(685 x 348 x 215) (610 x 327 x 186) (654 x 159) (161) (489) (184) (533 x 213)N241210FHLRT 26.95 x 13.72 x 12.49 24.00 x 12.87 x 11.33 25.75 x 6.25 10.33 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 317) (610 x 327 x 288) (654 x 159) (262) (489) (184) (533 x 213)N241211FHLRT* 26.95 x 13.72 x 13.23 24.00 x 12.87 x 12.08 25.75 x 6.25 11.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 336) (610 x 327 x 307) (654 x 159) (281) (489) (184) (533 x 213)N241212FHLRT* 26.95 x 13.72 x 14.23 24.00 x 12.87 x 13.08 25.75 x 6.25 12.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 361) (610 x 327 x 332) (654 x 159) (307) (489) (184) (533 x 213)N241213FHLRT* 26.95 x 13.72 x 15.23 24.00 x 12.87 x 14.08 25.75 x 6.25 13.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 387) (610 x 327 x 358) (654 x 159) (332) (489) (184) (533 x 213)N241214FHLRT* 26.95 x 13.72 x 16.23 24.00 x 12.87 x 15.08 25.75 x 6.25 14.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 412) (610 x 327 x 383) (654 x 159) (358) (489) (184) (533 x 213)N241215FHLRT* 26.95 x 13.72 x 17.23 24.00 x 12.87 x 16.08 25.75 x 6.25 15.08 19.25 7.25 21.00 x 8.37 25 lbs. BP-2412(685 x 348 x 438) (610 x 327 x 408) (654 x 159) (383) (489) (184) (533 x 213)N241216FHLRT* 26.95 x 13.72 x 18.23 24.00 x 12.87 x 17.08 25.75 x 6.25 16.08 19.25 7.25 21.00 x 8.37 26 lbs. BP-2412(685 x 348 x 463) (610 x 327 x 434) (654 x 159) (408) (489) (184) (533 x 213)N241217FHLRT* 26.95 x 13.72 x 19.23 24.00 x 12.87 x 18.08 25.75 x 6.25 17.08 19.25 7.25 21.00 x 8.37 26 lbs. BP-2412(685 x 348 x 488) (610 x 327 x 459) (654 x 159) (434) (489) (184) (533 x 213)N241218FHLRT* 26.95 x 13.72 x 20.23 24.00 x 12.87 x 19.08 25.75 x 6.25 18.08 19.25 7.25 21.00 x 8.37 26 lbs. BP-2412(685 x 348 x 514) (610 x 327 x 485) (654 x 159) (459) (489) (184) (533 x 213)N241219FHLRT* 26.95 x 13.72 x 21.23 24.00 x 12.87 x 20.08 25.75 x 6.25 19.08 19.25 7.25 21.00 x 8.37 27 lbs. BP-2412(685 x 348 x 539) (610 x 327 x 510) (654 x 159) (485) (489) (184) (533 x 213)N241220FHLRT 26.95 x 13.72 x 22.23 24.00 x 12.87 x 21.08 25.75 x 6.25 20.08 19.25 7.25 21.00 x 8.37 32 lbs. BP-2412(685 x 348 x 564) (610 x 327 x 535) (654 x 159) (510) (489) (184) (533 x 213)CONTROLENCLOSURES*Available as made to order.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com276
Control <strong>Enclosures</strong> Type 3R “FHLRT” Configuration Technical ChartsCONTROLENCLOSURESControl <strong>Enclosures</strong> Type 3R - “FHLRT” Configuration Dimensions (continued)CATALOGNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K LENCLOSURE OPENINGM X NENCLOSUREWEIGHTPANELNUMBERN24208FHLRT 27.00 x 21.24 x 9.90 24.05 x 20.39 x 9.25 25.75 x 14.00 8.25 19.25 15.25 21.25 x 16.00 32 lbs. BP-2420(686 x 539 x 252) (611 x 518 x 235) (654 x 356) (209) (489) (387) (540 x 406)N242010FHLRT* 27.00 x 21.24 x 11.90 24.05 x 20.39 x 11.25 25.75 x 14.00 8.25 19.25 15.25 21.25 x 16.00 37 lbs. BP-2420(686 x 539 x 302) (611 x 518 x 286) (654 x 356) (209) (489) (387) (540 x 406)N242410FHLRT 27.00 x 25.24 x 11.90 24.05 x 24.39 x 11.25 25.75 x 17.87 10.25 19.25 19.25 21.25 x 20.00 42 lbs. BP-2424(686 x 641 x 302) (611 x 619 x 286) (654 x 454) (260) (489) (489) (540 x 508)N242412FHLRT* 27.00 x 25.24 x 13.90 24.05 x 24.39 x 13.25 25.75 x 17.87 12.25 19.25 19.25 21.25 x 20.00 43 lbs. BP-2424(686 x 641 x 353) (611 x 619 x 336) (654 x 454) (311) (489) (489) (540 x 508)N30206FHLRT 32.86 x 20.99 x 7.89 29.90 x 20.14 x 7.23 30.75 x 14.25 6.23 25.25 15.25 27.00 x 16.50 34 lbs. BP-3020(835 x 533 x 200) (760 x 511 x 184) (806 x 362) (158) (641) (387) (686 x 419)N30208FHLRT 32.86 x 20.99 x 9.89 29.90 x 20.14 x 9.23 31.75 x 14.25 8.23 25.25 15.25 27.00 x 16.50 36 lbs. BP-3020(835 x 533 x 251) (760 x 511 x 234) (806 x 362) (209) (641) (387) (686 x 419)N302010FHLRT 32.86 x 20.99 x 11.89 29.90 x 20.14 x 11.23 31.75 x 14.25 10.23 25.25 15.25 27.00 x 16.50 39 lbs. BP-3020(835 x 533 x 302) (760 x 511 x 285) (806 x 362) (260) (641) (387) (686 x 419)N302011FHLRT* 32.86 x 20.99 x 12.89 29.90 x 20.14 x 12.23 31.75 x 14.25 11.23 25.25 15.25 27.00 x 16.50 48 lbs. BP-3020(835 x 533 x 327) (760 x 511 x 311) (806 x 362) (285) (641) (387) (686 x 419)N302012FHLRT 32.86 x 20.99 x 13.89 29.90 x 20.14 x 13.23 31.75 x 14.25 12.23 25.25 15.25 27.00 x 16.50 48 lbs. BP-3020(835 x 533 x 353) (760 x 511 x 336) (806 x 362) (311) (641) (387) (686 x 419)N302013FHLRT* 32.86 x 20.99 x 14.89 29.90 x 20.14 x 14.23 31.75 x 14.25 13.23 25.25 15.25 27.00 x 16.50 48 lbs. BP-3020(835 x 533 x 378) (760 x 511 x 361) (806 x 362) (336) (641) (387) (686 x 419)N302014FHLRT 32.86 x 20.99 x 15.89 29.90 x 20.14 x 15.23 31.75 x 14.25 14.23 25.25 15.25 27.00 x 16.50 49 lbs. BP-3020(835 x 533 x 404) (760 x 511 x 387) (806 x 362) (361) (641) (387) (686 x 419)N30247FHLRT 33.41 x 26.32 x 8.81 30.46 x 25.47 x 8.12 32.25 x 18.50 7.12 25.25 19.25 27.38 x 21.25 45 lbs. BP-3024(849 x 668 x 224) (774 x 647 x 206) (819 x 470) (181) (641) (489) (695 x 540)N302410FHLRT 33.41 x 26.32 x 11.95 30.46 x 25.47 x 11.27 32.25 x 18.50 10.27 25.25 19.25 27.38 x 21.25 50 lbs. BP-3024(849 x 668 x 304) (774 x 647 x 286) (819 x 470) (261) (641) (489) (695 x 540)N302412FHLRT 33.41 x 26.32 x 13.79 30.46 x 25.47 x 13.10 32.25 x 18.50 12.1 25.25 19.25 27.38 x 21.25 54 lbs. BP-3024(849 x 668 x 350) (774 x 647 x 333) (819 x 470) (307) (641) (489) (695 x 540)N302413FHLRT* 33.41 x 26.32 x 14.79 30.46 x 25.47 x 14.10 32.25 x 18.50 13.1 25.25 19.25 27.38 x 21.25 55 lbs. BP-3024(849 x 668 x 376) (774 x 647 x 358) (819 x 470) (333) (641) (489) (695 x 540)N302414FHLRT 33.41 x 26.32 x 15.79 30.46 x 25.47 x 15.10 32.25 x 18.50 14.1 25.25 19.25 27.38 x 21.25 56 lbs. BP-3024(849 x 668 x 401) (774 x 647 x 384) (819 x 470) (358) (641) (489) (695 x 540)N302415FHLRT* 33.41 x 26.32 x 16.79 30.46 x 25.47 x 16.10 32.25 x 18.50 15.1 25.25 19.25 27.38 x 21.25 58 lbs. BP-3024(849 x 668 x 426) (774 x 647 x 409) (819 x 470) (384) (641) (489) (695 x 540)N302416FHLRT 33.41 x 26.32 x 17.79 30.46 x 25.47 x 17.10 32.25 x 18.50 16.1 25.25 19.25 27.38 x 21.25 62 lbs. BP-3024(849 x 668 x 452) (774 x 647 x 434) (819 x 470) (409) (641) (489) (695 x 540)N302417FHLRT* 33.41 x 26.32 x 18.79 30.46 x 25.47 x 18.10 32.25 x 18.50 17.1 25.25 19.25 27.38 x 21.25 63 lbs. BP-3024(849 x 668 x 477) (774 x 647 x 460) (819 x 470) (434) (641) (489) (695 x 540)N302418FHLRT* 33.41 x 26.32 x 19.79 30.46 x 25.47 x 19.10 32.25 x 18.50 18.1 25.25 19.25 27.38 x 21.25 64 lbs. BP-3024(849 x 668 x 503) (774 x 647 x 485) (819 x 470) (460) (641) (489) (695 x 540)N302419FHLRT* 33.41 x 26.32 x 20.79 30.46 x 25.47 x 20.10 32.25 x 18.50 19.1 25.25 19.25 27.38 x 21.25 65 lbs. BP-3024(849 x 668 x 528) (774 x 647 x 511) (819 x 470) (485) (641) (489) (695 x 540)N302421FHLRT* 33.41 x 26.32 x 21.79 30.46 x 25.47 x 21.10 32.25 x 18.50 20.1 25.25 19.25 27.38 x 21.25 66 lbs. BP-3024(849 x 668 x 553) (774 x 647 x 536) (819 x 470) (511) (641) (489) (695 x 540)N302422FHLRT 33.41 x 26.32 x 22.79 30.46 x 25.47 x 21.10 32.25 x 18.50 21.1 25.25 19.25 27.38 x 21.25 67 lbs. BP-3024(849 x 668 x 579) (774 x 647 x 536) (819 x 470) (536) (641) (489) (695 x 540)N36308FHLRT 39.31 x 32.50 x 10.05 36.31 x 31.69 x 9.36 38.13 x 23.88 8.36 31.25 25.25 33.25 x 27.25 75 lbs. BP-3630(999 x 826 x 255) (922 x 805 x 238) (968 x 606) (212) (794) (641) (845 x 692)N363010FHLRT 39.31 x 32.50 x 12.05 36.31 x 31.69 x 11.36 38.13 x 23.88 10.36 31.25 25.25 33.25 x 27.25 78 lbs. BP-3630(999 x 826 x 306) (922 x 805 x 289) (968 x 606) (263) (794) (641) (845 x 692)N363012FHLRT 39.31 x 32.50 x 14.05 36.31 x 31.69 x 13.36 38.13 x 23.88 12.36 31.25 25.25 33.25 x 27.25 81 lbs. BP-3630(999 x 826 x 357) (922 x 805 x 339) (968 x 606) (314) (794) (641) (845 x 692)N363013FHLRT* 39.31 x 32.50 x 15.08 36.31 x 31.69 x 14.39 38.13 x 23.88 13.39 31.25 25.25 33.25 x 27.25 85 lbs. BP-3630(999 x 826 x 383) (922 x 805 x 366) (968 x 606) (340) (794) (641) (845 x 692)N363014FHLRT* 39.31 x 32.50 x 16.08 36.31 x 31.69 x 15.39 38.13 x 23.88 14.39 31.25 25.25 33.25 x 27.25 87 lbs. BP-3630(999 x 826 x 408) (922 x 805 x 391) (968 x 606) (366) (794) (641) (845 x 692)*Available as made to order.277<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Control <strong>Enclosures</strong> Type 3R “FHLRT” Configuration Technical ChartsWFDNumber of LatchesHEABAMJAKRTFHLRTSTAINLESS FIBERGLASSSTEEL HINGE ANDHINGE S.S. LATCHN1610* 2 2N2016 2 2N2412 2 2N2420 2 2N2424 2 2N3020 2 2N3024 2 2N3630 3 3N4836 3 3*N1610 has no padlock hasp featureB<strong>SE</strong>CTION B-BNCBL<strong>SE</strong>CTION A-ANOTE: Mounting hole dimension is .50 inches.Optional back panels available in various materials.See Accessories sectioin.CONTROLENCLOSURESControl <strong>Enclosures</strong> Type 3R - “FHLRT” Configuration Dimensions (continued)CATALOG OVERALL INSIDE MOUNTING ENCLOSURE OPENING ENCLOSURE PANELNUMBER H X W X D A X B X C E X F J K L M X N WEIGHT NUMBERN363015FHLRT* 39.31 x 32.50 x 17.58 36.31 x 31.69 x 16.39 38.13 x 23.88 15.39 31.25 25.25 33.25 x 27.25 88 lbs. BP-3630(999 x 826 x 474) (922 x 805 x 416) (968 x 606) (391) (794) (641) (845 x 692)N363016FHLRT 39.31 x 32.50 x 19.58 36.31 x 31.69 x 17.39 38.13 x 23.88 16.39 31.25 25.25 33.25 x 27.25 89 lbs. BP-3630(999 x 826 x 497) (922 x 805 x 442) (968 x 606) (416) (794) (641) (845 x 692)N363017FHLRT* 39.31 x 32.50 x 18.58 36.31 x 31.69 x 18.39 38.13 x 23.88 17.39 31.25 25.25 33.25 x 27.25 90 lbs. BP-3630(999 x 826 x 472) (922 x 805 x 467) (968 x 606) (442) (794) (641) (845 x 692)N363018FHLRT* 39.31 x 32.50 x 20.58 36.31 x 31.69 x 19.39 38.13 x 23.88 18.39 31.25 25.25 33.25 x 27.25 91 lbs. BP-3630(999 x 826 x 523) (922 x 805 x 493) (968 x 606) (467) (794) (641) (845 x 692)N363019FHLRT* 39.31 x 32.50 x 21.58 36.31 x 31.69 x 20.39 38.13 x 23.88 19.39 31.25 25.25 33.25 x 27.25 92 lbs. BP-3630(999 x 826 x 548) (922 x 805 x 518) (968 x 606) (492) (794) (641) (845 x 692)N363020FHLRT* 39.31 x 32.50 x 22.58 36.31 x 31.69 x 21.39 38.13 x 23.88 20.39 31.25 25.25 33.25 x 27.25 93 lbs. BP-3630(999 x 826 x 573) (922 x 805 x 543) (968 x 606) (518) (794) (641) (845 x 692)N363021FHLRT* 39.31 x 32.50 x 23.58 36.31 x 31.69 x 22.39 38.13 x 23.88 21.39 31.25 25.25 33.25 x 27.25 94 lbs. BP-3630(999 x 826 x 599) (922 x 805 x 569) (968 x 606) (543) (794) (641) (845 x 692)N363022FHLRT* 39.31 x 32.50 x 24.58 36.31 x 31.69 x 23.39 38.13 x 23.88 22.39 31.25 25.25 33.25 x 27.25 95 lbs. BP-3630(999 x 826 x 625) (922 x 805 x 594) (968 x 606) (569) (794) (641) (845 x 692)N363023FHLRT 39.31 x 32.50 x 25.58 36.31 x 31.69 x 24.39 38.13 x 23.88 23.39 31.25 25.25 33.25 x 27.25 96 lbs. BP-3630(999 x 826 x 650) (922 x 805 x 620) (968 x 606) (594) (794) (641) (845 x 692)N363613FHLRT* 39.50 x 36.50 x 15.06 36.25 x 36.25 x 13.88 38.25 x 28.50 12.87 29 31 32.00 x 32.00 88 lbs. BP-3636(1003 x 927 x 383) (921 x 921 x 352) (972 x 724) (327) (737) (787) (813 x 813)*Available as made to order.All measures are in inches, items in parentheses are in millimeters.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com278
Control <strong>Enclosures</strong> ControlTower ©NControl <strong>Enclosures</strong> ControlTower © Shared Characteristics<strong>Stahlin</strong> designates itslargest sizes andupright cabinets as theControlTower © Series.ControlTower © includesconfigurations of NEMA4X, 12 and 3R in a variety of styles such as single and double doorformations, as well as wall mount and free standing. Large controlenclosures are used in a variety of applications involving diverseenvironmental conditions. Double door configurations are available onlyon designated sizes. Wall mount configurations or free standingenclosures are also determined by size. <strong>Stahlin</strong>’s ControlTower ©enclosures are built to meet rugged construction requirements and offerprotection against windblown dust, rain, sleet and external ice formation.ConstructionMaterialGasketStainless Steel HardwareTwistlock LatchesMounting BossesMetal InsertsIntegral Mounting FeetFloor StandingFiberglass HingesDouble DoorsRigid Side WallsLight Gray ColorHot compression molded fiberglassreinforced polyester, hand layup FRPPoured polyurethane seamlessgasket provides watertight, dust-tightenvironmental seal<strong>300</strong> Series stainless used on all hardwareEase of entry into enclosurePanel mounting capability for fixedrear panelAll bosses utilize threaded brass insertsEase of installation on all wall mountproductsFloor mounting of all free standingconfigurationsAlternate style non metallic hinges availableTwo doors opening from center on allappropriate configurationsExcellent mechanical strength forcomponent mountingPleasing aesthetics for any applicationPhysical CharacteristicsCONTROLENCLOSURESOrdering Information - Deriving <strong>Catalog</strong> Numbersexact catalog numbers on following pagesControl <strong>Enclosures</strong> ControlTower © - ConfigurationsConfigurationIDDESCRIPTIONWTType 4X, single door, latched down coverDDWT- Type 4X, double door, latched down coverFSWT- Type 4X, free standing, latched down coverFSDDWT Type 4X, free standing, double door, latched down coverHWTType 4X, single door, SS hinged, latched down coverDDHWT Type 4X, double door, SS hinged, latched down coverFSHWT Type 4X, free standing, single door, SS hinged, latched down coverFSDDHWT Type 4X, free standing, double door, SS hinged, latched down coverFHLWT Type 4X, single door, fiberglass hinged, through the door latchesDDFHLWT Type 4X, double door, fiberglass hinged, through the door latchesFSFHLWT Type 4X, free standing, fiberglass hinged, through the door latchesFSDDFHLWT Type 4X, double door, fiberglass hinged, through the door latchesType 12 Type 12, SS hinged, latched down coverDDType 12, double door, SS hinged, latched down coverFSType 12, free standing, single door, SS hinged, latched down coverFSDDType 12, free standing, double door, SS hinged, latched down coverRTType 3R, single door, SS hinged, latched down coverDDRT Type 3R, double door, SS hinged, latched down coverFSRTType 3R, free standing, single door, SS hinged, latched down coverFSDDRT Type 3R, free standing, double door, SS hinged, latched down coverFHLRT Type 3R, single door, fiberglass hinged, through the door latchesDDFHLRT Type 3R, double door, fiberglass hinged, through the door latchesFSFHLRT Type 3R, free standing, fiberglass hinged, through the door latchesFSDDFHLRT Type 3R, free standing, double door, fiberglass hinged, throughthe door latches<strong>Non</strong> corrosiveWater-tightDust-tightImpact resistant<strong>Non</strong> ConductiveLight weightUV resistantWorkable materialEasy maintenancePleasing aestheticsColor/FinishIndustry StandardsUL/cUL 50NEMA 250CSA Std C22.2IEC 60529Temperature RangeFlammability RatingWindow flammabilitySelf extinguishingChemical ResistanceStands up to an exceptionally broadrange of chemical exposuresAs designated on Type 4X enclosuresResults in an environmentally sealed,environmentally sound spaceResilient material with high impactresistanceDouble insulated material. No incidentalelectrical contactSolid construction in a lightweightdesignMinimizes the affects of sunlightCuts, drills, punches, and saws withease and accuracyScratches and gouges can be restoredwith a petroleum jelly productSmooth lines, soft colors easily blendinto customer’s design conceptsSmooth surface, no color variations,swirls, or color pockets, no voids.File E64358Type 1, 3, 3R, 4X, 12 as designatedType 1, 3, 3R, 4X, 12 as designatedFile LR069014Type 1, 3, 3R, 4X, 12 as designatedIP55, IP66(-40°F to +250°F) (-40°C to +130°C)UL94-5VUL94V-0<strong>Non</strong>-flame propagatingFull chemical resistance charts listed inappendix279<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Control <strong>Enclosures</strong> “ControlTower © ” Single Door, Free StandingN ControlTower © Single Door, Free StandingFSType 12, SS hinged, latched down coverFSWT Type 4X, latched down coverFSHWT Type 4X, SS hinged, latched down coverFSFHLWT Type 4X, fiberglass hinged, through the door latchesFSRT Type 3R, SS hinged, latched down coverFSFHLRT Type 3R, fiberglass hinged, through the door latchesBAAB <strong>SE</strong>CTION B-B <strong>SE</strong>CTION A-ACONTROLENCLOSURESControlTower ® Single Door, Free Standing DimensionsCATALOG OVERALL INSIDE ENCLOSURE OPENING PANELNUMBER H X W X D A X B X C J K L M X N NUMBERN722418 72.50 x 24.50 x 19.38 72.00 x 24.00 x 18.88 17.88 15.50 18.00 64.75 x 20.00 BP7224(1841 x 610 x 492) (1829 x 610 x 479) (454) (388) (457) (1645 x 508)N722424 72.50 x 24.50 x 25.38 72.00 x 24.00 x 24.88 23.88 15.50 18.00 64.75 x 20.00 BP7224(1841 x 610 x 492) (1829 x 610 x 631) (606) (388) (457) (1645 x 508)N722518 72.50 x 25.50 x 19.38 72.00 x 25.00 x 18.88 17.88 15.50 19.00 64.75 x 21.00 BP7225(1841 x 648 x 492) (1829 x 635 x 479) (454) (388) (483) (1645 x 533)N722525 72.50 x 25.50 x 26.38 72.00 x 25.00 x 25.88 24.88 15.50 19.00 64.75 x 21.00 BP7225(1841 x 648 x 492) (1829 x 635 x 657) (632) (388) (483) (1645 x 533)N723018 72.50 x 30.50 x 19.38 72.00 x 30.00 x 18.88 17.88 15.50 24.00 64.75 x 26.00 BP7230(1841 x 775 x 492) (1829 x 762 x 479) (454) (388) (607) (1645 x 660)N723024 72.50 x 30.50 x 25.38 72.00 x 30.00 x 24.88 23.88 15.50 24.00 64.75 x 26.00 BP7230(1841 x 775 x 644) (1829 x 762 x 631) (606) (388) (607) (1645 x 660)N723124 72.50 x 31.50 x 25.38 72.00 x 31.00 x 24.88 23.88 15.50 25.00 64.75 x 27.00 BP7231(1841 x 800 x 644) (1829 x 787 x 631) (606) (388) (635) (1645 x 675)N723618 72.50 x 36.50 x 19.38 72.00 x 36.00 x 18.88 17.88 15.50 30.00 64.75 x 32.00 BP7236(1841 x 927 x 492) (1829 x 914 x 479) (454) (388) (762) (1645 x 813)N723624 72.50 x 36.50 x 25.38 72.00 x 36.00 x 24.88 23.88 15.50 30.00 64.75 x 32.00 BP7236(1841 x 927 x 492) (1829 x 914 x 631) (606) (388) (762) (1645 x 813)N723630 72.50 x 36.50 x 31.38 72.00 x 36.00 x 30.88 29.88 15.50 30.00 64.75 x 32.00 BP7236(1841 x 927 x 797) (1829 x 914 x 784) (759) (388) (762) (1645 x 813)N723636 72.50 x 36.50 x 37.38 72.00 x 36.00 x 36.88 35.88 15.50 30.00 64.75 x 32.00 BP7236(1841 x 927 x 949) (1829 x 914 x 937) (911) (388) (762) (1645 x 813)N723724 72.50 x 37.50 x 25.38 72.00 x 37.00 x 24.88 23.88 15.50 31.00 64.75 x 33.00 BP7237(1841 x 952 x 492) (1829 x 940 x 632) (606) (388) (787) (1645 x 838)N902420 90.50 x 24.50 x 21.88 90.00 x 24.00 x 21.38 20.38 20.00 18.00 82.75 x 20.00 BP9024(2299 x 622 x 556) (2286 x 610 x 543) (517) (508) (457) (2102 x 508)N903620 90.50 x 36.50 x 21.88 90.00 x 36.00 x 21.38 20.38 20.00 30.00 82.75 x 32.00 BP9036(2299 x 927 x 556) (2286 x 914 x 543) (517) (508) (762) (2102 x 813)N903624 90.50 x 36.50 x 25.88 90.00 x 36.00 x 25.38 24.5 20.00 30.00 82.75 x 32.00 BP9036(2299 x 927 x 492) (2286 x 914 x 644) (622) (508) (762) (2102 x 813)N903636 90.50 x 36.50 x 37.88 90.00 x 36.00 x 37.38 36.25 20.00 30.00 82.75 x 32.00 BP9036(2299 x 927 x 949) (2286 x 914 x 949) (921) (508) (762) (2102 x 813)<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com280
N ControlTower © Single Door, Wall Mounted(No Suffix) Type 12, SS hinged, latched down coverWTType 4X, latched down coverHWT Type 4X, SS hinged, latched down coverFHLWT Type 4X, fiberglass hinged, through the door latchesRTType 3R, SS hinged, latched down coverFHLRT Type 3R, fiberglass hinged, through the door latchesControl <strong>Enclosures</strong> - “ControlTower © ” Single Door, Wall MountedBCONTROLENCLOSURESAAB(4 PLC'S.)<strong>SE</strong>CTION B-B<strong>SE</strong>CTION A-AControlTower ® Single Door, Wall Mounted DimensionsCATALOG OVERALL INSIDE MOUNTING ENCLOSURE OPENING PANELNUMBER H X W X D A X B X C E X F J K L M X N NUMBERN483612 51.29 x 36.62 x 13.93 48.33 x 36.22 x 13.25 50.12 x 28.50 12.25 21.63 31.25 45.25 x 32.00 BP4836(1303 x 930 x 354) (1228 x 920 x 336) (1273 x 724) (311) (549) (794) (1149 x 813)N483616 51.29 x 36.62 x 17.93 48.33 x 32.22 x 17.25 50.12 x 28.50 16.25 21.63 31.25 45.25 x 32.00 BP4836(1303 x 930 x 456) (1228 x 920 x 438) (1273 x 724) (413) (549) (794) (1149 x 813)N602418 63.75 x 24.50 x 20.12 60.38 x 36.13 x 19.44 62.50 x 16.75 18.44 27.63 19.25 57.25 x 20.00 BP6024(1619 x 622 x 511) (1533 x 918 x 493) (1587 x 425) (468) (702) (489) (1454 x 508)N603612 64.00 x 36.50 x 14.12 60.62 x 36.13 x 13.44 62.75 x 28.75 12.44 27.63 31.25 57.25 x 32.00 BP6036(1627 x 927 x 359) (1540 x 918 x 441) (1594 x 730) (316) (702) (794) (1454 x 813)N603616 64.00 x 36.50 x 18.12 60.62 x 36.13 x 17.44 62.75 x 28.75 16.44 27.63 31.25 57.25 x 32.00 BP6036(1627 x 927 x 460) (1540 x 918 x 443) (1594 x 730) (418) (702) (794) (1454 x 813)N603624 63.75 x 36.50 x 26.12 60.38 x 36.13 x 25.44 62.50 x 28.75 24.44 27.63 31.25 57.25 x 32.00 BP6036(1619 x 927 x 663) (1533 x 918 x 646) (1587 x 730) (621) (702) (794) (1454 x 813)281<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Control <strong>Enclosures</strong> - “ControlTower © ” Double Door, Wall MountedN ControlTower © Double Door, Wall MountedDDType 12, SS hinged, latched down coverDDWT Type 4X, latched down coverDDHWT Type 4X, SS hinged, latched down coverDDFHLWT Type 4X, fiberglass hinged, through the door latchesDDRT Type 3R, SS hinged, latched down coverDDFHLRT Type 3R, fiberglass hinged, through the door latchesBAACONTROLENCLOSURESB<strong>SE</strong>CTION B-B<strong>SE</strong>CTION A-AControlTower ® Double Door, Wall Mounted DimensionsCATALOG OVERALL INSIDE MOUNTING ENCLOSURE OPENING PANELNUMBER H X W X D A X B X C E X F J K L M X N NUMBERN364812 39.50 x 48.50 x 13.62 36.12 x 48.12 x 13.00 38.25 x 40.5 11.94 14.50 20.00 32.00 x 20.75 BP3648 (2)(1003 x 1232 x 346) (917 x 1222 x 330) (972 x 1029) (303) (368) (508) (813 x 527)N54428 57.50 x 42.50 x 9.62 54.12 x 42.12 x 9.00 56.25 x 34.50 7.94 23.50 17.00 50.00 x 17.50 BP5442 (2)(1460 x 1080 x 244) (1374 x 1069 x 228) (1429 x 876) (201) (596) (431) (1270 x 444)<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com282
N ControlTower © Double Door, Free StandingFSDDType 12, SS hinged, latched down coverFSDDWT Type 4X, latched down coverFSDDHWT Type 4X, SS hinged, latched down coverFSDDFHLWT Type 4X, fiberglass hinged, through the door latchesFSDDRT Type 3R, SS hinged, latched down coverFSDDFHLRT Type 3R, fiberglass hinged, through the door latchesControl <strong>Enclosures</strong> - “ControlTower © ” Double Door, Free StandingBAACONTROLENCLOSURESB<strong>SE</strong>CTION B-B283<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Control <strong>Enclosures</strong> - “ControlTower © ” Double Door, Free StandingControlTower ® Double Door, Free Standing DimensionsCATALOG OVERALL INSIDE ENCLOSURE OPENING PANELNUMBER H X W X D A X B X C J K L M X N NUMBERN60488 60.50 x 48.50 x 9.38 60.13 x 48.13 x 9.01 7.88 13.00 19.50 52.75 x 20.50 BP6048(15.37 x 1232 x 238) (1524 x 1219 x 222) (197) (330) (495) (1340 x 521)N604810 60.50 x 48.50 x 11.38 60.13 x 48.13 x 11.01 9.88 13.00 19.50 52.75 x 20.50 BP6048(1537 x 1232 x 289) (1524 x 1219 x 273) (247) (330) (495) (1340 x 521)N604812 60.50 x 48.50 x 13.38 60.13 x 48.13 x 13.01 11.88 13.00 19.50 52.75 x 20.50 BP6048(1537 x 1232 x 340) (1524 x 1219 x 324) (289) (330) (495) (1340 x 521)N604816 60.50 x 48.50 x 17.38 60.13 x 48.13 x 17.01 15.88 13.00 19.50 52.75 x 20.50 BP6048(1537 x 1232 x 441) (1524 x 1219 x 425) (400) (330) (495) (1340 x 521)N604818 60.50 x 48.50 x 19.38 60.13 x 48.13 x 19.01 17.88 13.00 19.50 52.75 x 20.50 BP6048(1537 x 1232 x 492) (1524 x 1219 x 476) (450) (330) (495) (1340 x 521)N604820 60.50 x 48.50 x 21.38 60.13 x 48.13 x 21.01 19.88 13.00 19.50 52.75 x 20.50 BP6048(1537 x 1232 x 543) (1524 x 1219 x 527) (501) (330) (495) (1340 x 521)N604824 60.50 x 48.50 x 25.38 60.13 x 48.13 x 25.01 23.88 13.00 19.50 52.75 x 20.50 BP6048(1537 x 1232 x 645) (1524 x 1219 x 628) (603) (330) (495) (1340 x 521)N606010 60.50 x 60.50 x 11.38 60.13 x 60.13 x 11.01 9.88 13.00 25.50 52.75 x 26.50 BP6060(1537 x 1537 x 289) (1524 x 1524 x 273) (247) (330) (648) (1340 x 673)N606012 60.50 x 60.50 x 13.38 60.13 x 60.13 x 13.01 11.88 13.00 25.50 52.75 x 26.50 BP6060(1537 x 1537 x 340) (1524 x 1524 x 324) (298) (330) (648) (1340 x 673)N606016 60.50 x 60.50 x 17.38 60.13 x 60.13 x 17.01 15.88 13.00 25.50 52.75 x 26.50 BP6060(1537 x 1537 x 441) (1524 x 1524 x 425) (400) (330) (648) (1340 x 673)N606018 60.50 x 60.50 19.38 60.13 x 60.13 x 19.01 17.88 13.00 25.50 52.75 x 26.50 BP6060(1537 x 1537 x 492) (1524 x 1524 x 476) (450) (330) (648) (1340 x 673)N606024 60.50 x 60.50 x 25.38 60.13 x 60.13 x 25.01 23.88 13.00 25.50 52.75 x 26.50 BP6060(1537 x 1537 x 645) (1524 x 1524 x 628) (603) (330) (648) (1340 x 673)N624810 62.50 x 48.50 x 11.38 62.13 x 48.13 x 11.01 9.88 13.00 19.50 54.75 x 20.50 BP6248(1587 x 1231 x 289) (1574 x 1219 x 273) (247) (330) (495) (1390 x 521)N624812 62.50 x 48.50 x 13.38 62.13 x 48.13 x 13.01 11.88 13.00 19.50 54.75 x 20.50 BP6248(1587 x 1231 x 340) (1574 x 1219 x 324) (298) (330) (495) (1390 x 521)N626012 62.50 x 60.50 x 13.38 62.13 x 60.13 x 13.01 11.88 13.00 25.50 54.75 x 26.50 BP6260(1587 x 1537 x 340) (1574 x 1524 x 324) (298) (330) (648) (1390 x 673)N724818 72.50 x 48.50 x 19.38 72.00 x 48.00 x 18.88 17.88 15.50 19.50 64.75 x 20.50 BP7248(1842 x 1232 x 492) (1824 x 1219 x 476) (450) (394) (495) (1645 x 521)N724824 72.50 x 48.50 x 25.38 72.00 x 48.00 x 24.88 23.88 15.50 19.50 64.75 x 20.50 BP7248(1842 x 1232 x 645) (1842 x 1219 x 628) (603) (394) (495) (1645 x 521)N724925 72.50 x 49.50 x 26.38 72.00 x 49.00 x 25.88 24.88 15.50 20.00 64.75 x 21.00 BP7249(1842 x 1257 x 670) (1829 x 1245 x 654) (628) (394) (508) (1645 x 533)N726010 72.50 x 60.50 x 11.38 72.00 x 60.00 x 10.88 9.88 15.50 25.50 64.75 x 26.50 BP7260(1842 x 1537 x 289) (1829 x 1524 x 273) (247) (394) (648) (1645 x 673)N726012 72.50 x 60.50 x 13.38 72.00 x 60.00 x 12.88 11.88 15.50 25.50 64.75 x 26.50 BP7260(1842 x 1537 x 340) (1829 x 1524 x 324) (298) (394) (648) (1645 x 673)N726016 72.50 x 60.50 x 17.38 72.00 x 60.00 x 16.88 15.88 15.50 25.50 64.75 x 26.50 BP7260(1842 x 1537 x 441) (1829 x 1524 x 425) (400) (394) (648) (1645 x 673)N726018 72.50 x 60.50 x 19.38 72.00 x 60.00 x 18.88 17.88 15.50 25.50 64.75 x 26.50 BP7260(1842 x 1537 x 492) (1829 x 1524 x 476) (450) (394) (648) (1645 x 673)N726020 72.50 x 60.50 x 21.38 72.00 x 60.00 x 20.88 19.88 15.50 25.50 64.75 x 26.50 BP7260(1824 x 1537 x 543) (1829 x 1245 x 527) (501) (394) (648) (1645 x 673)N726024 72.50 x 60.50 x 25.38 72.00 x 60.00 x 24.88 23.88 15.50 25.50 64.75 x 26.50 BP7260(1842 x 1537 x 645) (1829 x 1524 x 603) (603) (394) (648) (1645 x 673)N726036 72.50 x 60.50 x 37.38 72.00 x 60.00 x 36.88 35.88 15.50 25.50 64.75 x 26.50 BP7260(1842 x 1537 x 949) (1829 x 1524 x 933) (908) (394) (648) (1645 x 673)N727210 72.50 x 72.50 x 11.38 72.00 x 72.00 x 10.88 9.88 15.50 31.50 64.75 x 32.50 BP7272(1842 x 1842 x 289) (1829 x 1829 x 273) (247) (394) (800) (1645 x 826)N727212 72.50 x 72.50 x 13.38 72.00 x 72.00 x 12.88 11.88 15.50 31.50 64.75 x 32.50 BP7272(1842 x 1842 x 340) (1829 x 1829 x 324) (298) (394) (800) (1645 x 826)N727216 72.50 x 72.50 x 17.38 72.00 x 72.00 x 16.88 15.88 15.50 31.50 64.75 x 32.50 BP7272(1842 x 1842 x 441) (1829 x 1829 x 425) (400) (394) (800) (1645 x 826)N727218 72.50 x 72.50 x 19.38 72.00 x 72.00 x 18.88 17.88 15.50 31.50 64.75 x 32.50 BP7272(1842 x 1842 x 492) (1829 x 1829 x 425) (400) (394) (800) (1645 x 826)N727220 72.50 x 72.50 x 21.38 72.00 x 72.00 x 20.88 19.88 15.50 31.50 64.75 x 32.50 BP7272(1842 x 1842 x 543) (1829 x 1829 x 527) (501) (394) (800) (1645 x 826)N727224 72.50 x 72.50 x 25.38 72.00 x 72.00 x 24.88 23.88 15.50 31.50 64.75 32.50 BP7272(1842 x 1842 x 645) (1829 x 1829 x 603) (603) (394) (800) (1645 x 826)N746012 74.50 x 60.50 x 13.83 74.00 x 60.00 x 12.88 11.88 16.00 25.50 66.75 x 26.50 BP7460(1892 x 1537 x 351) (1880 x 1524 x 324) (298) (406) (648) (1695 x 673)N747212 74.50 x 72.50 x 13.38 74.00 x 72.00 x 12.88 11.88 16.00 31.50 66.75 x 32.50 BP7472(1892 x 1842 x 351) (1880 x 1829 x 324) (298) (406) (800) (1695 x 826)N747224 74.50 x 72.50 x 25.38 74.00 x 72.00 x 24.88 23.88 16.00 31.50 66.75 x 32.50 BP7472(1892 x 1842 x 645) (1880 x 1829 x 603) (603) (406) (800) (1695 x 826)N904820 90.50 x 48.50 x 21.88 90.00 x 48.00 x 21.38 20.38 20.00 20.00 82.75 x 20.13 BP9048(2299 x 1232 x 556) (2286 x 1219 x 540) (514) (508) (495) (2102 x 521)N907220 90.50 x 72.50 x 21.88 90.00 x 72.00 x 21.38 20.38 20.00 32.00 82.75 x 32.13 BP9072(2299 x 1842 x 556) (2286 x 1829 x 540) (501) (508) (800) (2102 x 826)N907224 90.50 x 72.50 x 25.88 90.00 x 72.00 x 25.38 24.38 20.00 32.00 82.75 x 32.13 BP9072(2299 x 1842 x 657) (2286 x 1829 x 641) (616) (508) (800) (2102 x 826)N907236 90.50 x 72.50 x 37.88 90.00 x 72.00 x 37.38 36.38 20.00 32.00 82.75 x 32.13 BP9072(2299 x 1842 x 962) (2286 x 1829 x 946) (921) (508) (800) (2102 x 826)CONTROLENCLOSURES<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com284
Control <strong>Enclosures</strong> – Dual AccessNDControl <strong>Enclosures</strong> Dual Access CharacteristicsLarge control enclosuresare used in a variety ofenvironmental conditions.Dual Access enclosuresare designed to meet therigorous demands of indoorand outdoor applications. Theunique capability of this enclosureis a provision for side to side accessibility.Designed as a wall mount enclosure, complete with built in mountingfeet, the enclosure has two separate doors and a moveable internalpanel mounting system. One or more panels may be apportioned toprovide a completely custom control mounting. Each door has acompletely separate padlock capability for security purposes.ConstructionMaterialGasketStainless Steel HardwarePadlock CapabilitiesLink lock LatchesIntegral Mounting FeetInternal Rail SystemRigid Side WallsColor/FinishHot compression molded fiberglassreinforced polyester, hand layup FRPPoured polyurethane seamlessgasket provides watertight, dust-tightenvironmental seal<strong>300</strong> Series stainless used on all hardwareSecurity padlock capabilities oneither doorEase of entry into enclosureEase of installation on all wall mountproductsTotal internal panel positioning flexibilityExcellent mechanical strength forcomponent mountingSmooth surface, no color variations,swirls, or color pockets, no voids.CONTROLENCLOSURESOrdering Information - Deriving <strong>Catalog</strong> NumbersFamily ID Size ID Configuration ID EXAMPLEND 2012 FS “ND2012FS”Control <strong>Enclosures</strong> Dual Access - Inside DimensionsSize ID H x W x D Aluminum Back PanelND201612 20 x 16 x 12 IncludedND201616 20 x 16 x 16 IncludedND201620 20 x 16 x 20 IncludedND201624 20 x 16 x 24 IncludedND241220 24 x 12 x 20 IncludedND242420 24 x 24 x 20 IncludedND302016 30 x 20 x 16 IncludedND302420 30 x 24 x 20 IncludedND302424 30 x 24 x 24 IncludedND363016 36 x 30 x 16 IncludedND363020 36 x 30 x 20 IncludedND363024 36 x 30 x 24 IncludedControl <strong>Enclosures</strong> Dual Access - ConfigurationsConfigurationIDDESCRIPTIONno suffix Wall mount style, stainless steel hinged, latched down coverFSFreestanding, stainless steel hinged, latched down coverRMRack mount, stainless steel hinged, latched down coverPhysical Characteristics<strong>Non</strong> corrosiveImpact resistant<strong>Non</strong> ConductiveLight weightUV resistantWorkable materialEasy maintenancePleasing aestheticsIndustry StandardsUL/cUL 50NEMA 250CSA Std C22.2Temperature RangeFlammability RatingWindow flammabilitySelf extinguishingChemical ResistanceStands up to an exceptionally broadrange of chemical exposuresResilient material with high impactresistanceDouble insulated material. No incidentalelectrical contactSolid construction in a lightweightdesignMinimizes the affects of sunlightCuts, drills, punches, and saws withease and accuracyScratches and gouges can be restoredwith a petroleum jelly productSmooth lines, soft colors easily blendinto customer’s design conceptsUnratedUnratedUnrated(-40°F to +250°F) (-40°C to +130°C)UL94-5VUL94V-0<strong>Non</strong>-flame propagatingFull chemical resistance charts listed inappendix285<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“Control <strong>Enclosures</strong> – Dual Access” ConfigurationsNDControl <strong>Enclosures</strong> – Dual Accessno suffixFSRMWall mount style, SS hinged, latched down coverFree standing, SS hinged, latched down coverRack mount, SS hinged, latched down coverDesign Features● Unique dual side door design forfront and rear access● Wall mount configuration● Rigid body construction and environmentallysealed as designated● Memory retaining polyurethane gasketing● Strut mounted rail for adjustable panel mounting● Built in padlock hasp● Window availabilityND201620“STAHLIN INFORMATION CENTER”CONTROLENCLOSURESPanels - Dual Access <strong>Enclosures</strong><strong>Stahlin</strong> offers a special configuration enclosure series designated: Control Dual Access (ND). This series is unique inthat a removeable aluminum interior panel is supplied with the enclosure. Therefore, no enclosure specific panel partnumbers are offered in this section.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com286
NDTechnical Specifications - Control <strong>Enclosures</strong> Type Dual Access“Dual Access (no suffix)” configuration - latched down coverNNDConstructionMaterialGasketStainless Steel HardwarePadlock capabilityAdjustable panel mountSoft Edge DesignCenter PanelHot compression molded fiberglass reinforced polyester,hand layup FRPPoured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all hardwareBuilt in padlock hasps on both doorsStrut mounted rail for adjustable panel mountingRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisAluminum panel includedND201620NDIndustry StandardsCONTROLENCLOSURESNOTES:UL/cUL 50NEMA 250CSA Std C22.2Temperature RangeFlammability RatingWindow FlammabilitySelf ExtinguishingChemical ResistanceND AccessoriesUnratedUnratedUnrated(-40°F to +250°F) (-40°C to +130°C)UL94-5VUL94V-0<strong>Non</strong>-flame propagatingFull chemical resistance charts listed in appendixORDERING INFOSpecial AccessoriesDrain vent pg. 323Louver pg. 325Assorted hubs and cord grips pg. 327, 328Vapor capsule pg. 326NDModifications See Special ModRight Modification pg 315 - 322ORDERING INFODoor brace pg. 336Grounding studs pg. 339Removable dead front panels pg. 333Molded in color pg. 315 - 322Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom windows pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322287<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“Control <strong>Enclosures</strong> Type Dual Access” Technical DrawingsDWFBBNLHEAAAMJKCB.50 DIA.[12.70]Can adapt to a 19" rack where "L" dimension exceeds 20".<strong>SE</strong>CTION B-B<strong>SE</strong>CTION A-ABack panels available in various materials. Consult facotry for details.Control <strong>Enclosures</strong> Type “Dual Access” Configuration DimensionsSIZE IDNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K LENCLOSURE OPENINGM X NENCLOSUREWEIGHTND201612 23.19 x 16.95 x 12.47 19.71 x 16.04 x 12.16 21.94 x 4.88 15.00 17.00 12.50 16.75 x 12.19 38 lbs.(589 x 431 x 317) (501 x 407 x 309) (577 x 124) (381) (432) (318) (425 x 310)ND201616 23.19 x 16.95 x 16.47 19.71 x 16.04 x 16.16 21.94 x 8.88 15.00 17.00 12.50 16.75 x 12.19 46 lbs.(589 x 431 x 418) (501 x 407 x 410) (557 x 225) (381) (432) (318) (425 x 310)ND201620 23.19 x 16.95 x 20.47 19.71 x 16.04 x 20.16 21.94 x 12.88 15.00 17.00 12.50 16.75 x 12.19 49 lbs.(589 x 431 520) (501 x 407 x 512) (557 x 327) (381) (432) (318) (425 x 310)ND201624 23.19 x 16.95 x 24.47 19.71 x 16.04 x 24.16 21.94 x 16.88 15.00 17.00 12.50 16.75 x 12.19 52 lbs.(589 x 431 x 622) (501 x 407 x 614) (557 x 429) (381) (432) (318) (425 x 310)ND241220 27.38 x 13.80 x 20.89 24.00 x 12.88 x 20.58 26.13 x 12.88 19.00 21.00 9.19 21.00 x 8.37 54 lbs.(695 x 351 x 531) (610 x 327 x 523) (664 x 327) (483) (533) (233) (533 x 213)ND242420 27.43 x 25.32 x 20.73 24.06 x 24.40 x 20.42 26.18 x 12.88 19.00 21.00 20.69 21.25 x 20.00 85 lbs.(697 x 643 x 527) (611 x 620 x 519) (665 x 327) (483) (533) (525) (540 x 508)ND302016 33.37 x 21.09 x 16.44 24.92 x 20.13 x 16.07 32.12 x 8.88 25.00 27.00 16.50 27.00 x 16.50 90 lbs.(848 x 536 x 418) (633 x 511 x 408) (816 x 225) (635) (686) (419) (686 x 419)ND302420 33.75 x 26.30 x 20.51 30.41 x 25.38 x 20.13 32.50 x 12.88 25.00 27.00 21.69 27.38 x 21.25 95 lbs.(857 x 668 x 521) (772 x 645 x 511) (825 x 327) (635) (686) (551) (695 x 540)ND302424 33.75 x 26.30 x 24.51 30.41 x 25.38 x 24.13 32.50 x 16.88 25.00 27.00 21.69 27.38 x 21.25 105 lbs.(857 x 668 x 622) (772 x 645 x 613) (825 x 429) (635) (686) (551) (695 x 540)ND363016 39.63 x 32.58 x 16.78 36.25 x 31.63 x 16.40 38.38 x 8.88 31.00 33.00 27.94 33.25 x 27.25 150 lbs.(1006 x 827 x 426) (921 x 803 x 417) (975 x 225) (787) (838) (710) (845 x 692)ND363020 39.63 x 32.58 x 20.78 36.25 x 31.63 x 20.40 38.38 x 12.88 31.00 33.00 27.94 33.25 x 27.25 158 lbs.(1006 x 827 x 528) (921 x 803 x 518) (975 x 327) (787) (838) (710) (845 x 692)ND363024 39.63 x 32.58 x 24.78 36.25 x 31.63 x 24.40 38.38 x 16.88 31.00 33.00 27.94 33.25 x 27.25 165 lbs.(1006 x 827 x 629) (921 x 803 x 620) (975 x 429) (787) (838) (710) (845 x 692)CONTROLENCLOSURESAbove <strong>Catalog</strong> Numbers = Wall MountExample: ND201612 (See drawing)Suffix-FS = FreestandingExample: ND201612FS (Drawing on request)Suffix-RM = Rack MountExample: ND201612RM (Drawing on request)WINDOWS AVAILABLE IN EITHER DOOR. SPECIFY SIZE, LOCATION (FRONT, REAR, or BOTH)*Note: A, B, and C are outside dimensions.All measures are in inches.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com288
Control Disconnect <strong>Enclosures</strong>CCONTROLDISCONNECTControl Disconnect <strong>Enclosures</strong><strong>Stahlin</strong>’s Control Disconnect <strong>Enclosures</strong> offer a unique range of product designed around a Type 4X watertight,corrosion resistant vertical disconnect handle. The versatile mechanism functions as a universal linkage compatible with namebrand disconnects, circuit breakers and combination starters. Current-sensing yokes are offered to complement the circuitbreaker products.An environmentally sealed vertical disconnect mechanism differs significantly from a rotary through-the-door mechanism.The assembly maintains the complete environmental integrity of the enclosure while it minimizes panel obstruction. Themechanism mounts to the far right side of the enclosure and minimizes thelinkage interference with panel mounted components. As a result,competitively priced, commercially available control can be used.<strong>Stahlin</strong>’s unique handle mechanism uses internal cabinet spacein the most efficient way possible. The handle mechanism isIntegralunchanged, regardless of the capacity of the control.Mounting FeetHowever, six different enclosure sizes are offered toaccommodate both small and large control assemblies.Control Disconnect Enclosure Attributes●●●●●●●●Environmentally sealed Type 4X disconnecthandleSafety lock in off positionMemory retaining polyurethane gasketStainless steel full length continuous hinge<strong>300</strong> series stainless steelIntegral mounting feetMolded in panel mounting insertsHigh temperature, non corrosive, environmental designsPolyurethaneDoor GasketFull LengthStainless SteelHingeVersatile PanelMountingDisconnect Featured HighlightsControl PadlockHaspControl Disconnect Enclosure Specifications●Watertight as determined by type●Rated Type 1, 3, 3R, 4X, 12 as designated●Corrosion Resistant●Fire resistantLISTEDLISTED●UL/cUL/CSA approved●Light weightControl Disconnect <strong>Enclosures</strong> are Applicable for Many Industries including:Conveyors andMRO Facilities Process Control operational mechanisms SCADA systems
CONTROLDISCONNECTThe “Control Disconnect” Series● Six “standard” enclosure sizes● Type 4X rated handle mechanism● Padlockable in off position● Integral mounting feet
“Control Disconnect <strong>Enclosures</strong>”CControl Disconnect enclosures are used where a disconnecting meansis necessary and the application involves severe environmentalconditions. This Type 4X rated product is designed to meet the rigorousdemands of indoor and outdoor applications. A disconnect means in anenvironmentally sealed package is the natural choice for processcontrol, wastewater or chemical production locations. The enclosuresmaintain a watertight, corrosion resistant protection against a range ofchemicals, windblown dust, rain, sleet and external ice formation.Ordering Information - Base configuration without pre-mounted controlFamily ID Size ID EXAMPLEC 1610 “C1610”“Control Disconnect <strong>Enclosures</strong>” Shared CharacteristicsConstructionMaterialHot compression molded fiberglassreinforced polyesterGasketPoured polyurethane seamless gasketStainless Steel Hardware <strong>300</strong> Series stainless used on allhardwareScrew lock latchesEase of entry into enclosureMounting BossesPanel mounting capability for fixed rearpanelMetal insertsAll bosses utilize threaded brass insertsIntegral Mounting Feet Ease of installation on all wall mountproductsRigid Side WallsExcellent mechanical strength forcomponent mountingLight Gray ColorPleasing aesthetics for any applicationCONTROLDISCONNECTOrdering Information - Base configuration with pre-mounted controlFamily ID Size ID Configuration ID Switch Rating EXAMPLEC 1610 SND 3024 “C1610SND3024”“Control Disconnect <strong>Enclosures</strong>” - Inside DimensionsSize ID H x W x D Optional Panel #C1610 16 x 10 x 8 BP1610CDC2016 20 x 16 x 9 BP2016CDC2412 24 x 12 x 11 BP2412CDC2424 24 x 24 x 11 BP2424CDC3024 30 x 24 x 11 BP3024CDC3630 36 x 30 x 11 BP3630CDOptional back panels available in various materials. See page 330“Control Disconnect <strong>Enclosures</strong>” - Configurations/DefinitionsConfigurationIDDESCRIPTION(Base Configuration- No Suffix)screw down cover with disconnect mechanism onlyEnclosure, disconnect mechanism and mounted, specified controlSND- Square D non fusible disconnectsSFD-Square D fusible disconnectAND- Allen Bradley non fusible disconnectAFD-Allen Bradley fusible disconnectGND- General Electric non fusible disconnectGFD- General Electric fusible disconnectSwitch Rating3024 30 amp 240 volt6024 60 amp 240 volt1024 100 amp 240 volt2024 200 amp 240 volt3060 30 amp 600 volt6060 60 amp 600 volt1060 100 amp 600 volt2060 200 amp 600 voltPhysical Characteristics<strong>Non</strong> corrosiveWater-tightDust-tightImpact resistant<strong>Non</strong> ConductiveLight weightUV resistantWorkable materialEasy maintenancePleasing aestheticsColor/FinishIndustry StandardsUL/cUL 50NEMA 250CSA Std C22.2Temperature RangeFlammability RatingWindow flammabilitySelf extinguishingChemical ResistanceStands up to an exceptionally broadrange of chemical exposuresAs designated on Type 4X enclosuresResults in an environmentally sealed,environmentally sound spaceResilient material with high impactresistanceDouble insulated material. No incidentalelectrical contactSolid construction in a lightweightdesignMinimizes the affects of sunlightCuts, drills, punches, and saws withease and accuracyScratches and gouges can be restoredwith a petroleum jelly productSmooth lines, soft colors easily blendinto customer’s design conceptsSmooth surface, no color variations,swirls, or color pockets, no voids.File E64358SPType 1, 3, 3R, 4X, 12 as designatedType 1, 3, 3R, 4X, 12 as designatedFile LR069014Type 1, 3, 3R, 4X, 12 as designated(-40°F to +250°F) (-40°C to +130°C)UL94-5VUL94V-0<strong>Non</strong>-flame propagatingFull chemical resistance charts listed inappendix291<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“Control Disconnect <strong>Enclosures</strong>” Configurations Type 4XCControl Disconnect Enclosure – Vertical disconnect handle, without pre-mounted controlBase configuration (no suffix)hinged, screw down cover onlyDesign Features● Environmentally sealed vertical disconnect means● Memory retaining polyurethane gasketing● Rigid body construction and watertight seal● Molded in panel mounting inserts● Integral mounting feet for ease of installationC2016CControl Disconnect <strong>Enclosures</strong> – Vertical disconnect handle, with pre-mounted controlSND Square D non fusible disconnectsSFD Square D fusible disconnectAND Allen Bradley non fusible disconnectAFD Allen Bradley fusible disconnectGND General Electric non fusible disconnectGFD General Electric fusible disconnectDesign Features● Pre-mounted name brand disconnect mechanisms● Environmentally sealed vertical disconnect means● Memory retaining polyurethane gasketing● Rigid body construction and watertight seal● Molded in panel mounting inserts● Integral mounting feet for ease of installationCONTROLDISCONNECT<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com292
Control DisconnectCTechnical Specifications - “Control Disconnect <strong>Enclosures</strong>”Base configuration (no suffix) - Vertical disconnect handle,without pre-mounted controlCCConstructionMaterialGasketStainless Steel HardwareMolded in Mounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass insertsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisC2016NOTES:CIndustry StandardsUL/cUL 50 File E64358SP Type 1, 3, 3R, 4X, 12NEMA 250 Type 1, 3, 3R, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 3R, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixCONTROLDISCONNECTC AccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 330Carbon Steel BP__CS pg. 330Fiberglass BP__FG pg. 330Stainless Steel BP__SS pg. 330Special AccessoriesDrain Vents pg. 323Louver pg. 325Assorted hubs and cord grips pg. 327, 328Vapor capsule pg. 326CModifications See Special ModRight Modification on pg 315 - 322ORDERING INFODoor brace pg. 336Grounding studs pg. 339Molded in color pg. 315 - 322Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom windows pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322293<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“Control Disconnect <strong>Enclosures</strong>” “C” Configuration Technical Drawings Type 4XWFC1610 shownBOJH E MAKAAB<strong>SE</strong>CTION B-BNCDBL<strong>SE</strong>CTION A-A“Control Disconnect <strong>Enclosures</strong>” - “C” DimensionsOPENINGCATALOGNUMBEROVERALLH X W X DINSIDEA X B X CMOUNTINGE X F J K LENCLOSUREM X N OENCLOSUREWEIGHTPANELNUMBERC1610* 18.75 x 10.96 x 10.25 15.92 x 10.27 x 8.53 17.50 x 7.00 7.8 12 7.5 13.14 x 6.00 3.50 13 BP-1610CD(476 x 278 x 260) (404 x 261 x 217) (444 x 178) (198) (305) (191) (334 x 152) (89)C2016* 22.75 x 16.87 x 11.00 19.70 x 16.04 x 9.24 21.50 x 10.12 8.26 15.25 11.25 16.75 x 12.19 3.50 23 BP-2016CD(578 x 429 x 279) (500 x 407 x 235) (546 x 257) (210) (387) (286) (425 x 310) (89)C2412* 26.95 x 13.72 x 13.25 24.00 x 12.87 x 11.33 25.75 x 6.25 10.33 19.25 7.25 21.00 x 8.37 5.75 26 BP-2412CD(685 x 348 x 337) (610 x 327 x 288) (654 x 159) (262) (489) (184) (533 x 213) (146)C2424* 27.00 x 25.24 x 13.19 24.05 x 24.39 x 11.25 25.75 x 17.87 10.25 19.25 19.25 21.25 x 20.00 5.75 40 BP-2424CD(686 x 641 x 335) (611 x 619 x 286) (654 x 454) (260) (489) (489) (540 x 508) (146)C3024* 33.41 x 26.32 x 13.19 30.46 x 25.47 x 11.27 32.25 x 18.50 10.27 25.25 19.25 27.38 x 21.25 12.25 51 BP-3024CD(849 x 668 x 335) (774 x 647 x 286) (819 x 470) (261) (641) (489) (695 x 540) (311)C3630* 39.31 x 32.50 x 13.31 36.31 x 31.69 x 11.36 38.13 x 23.88 10.36 31.25 25.25 33.25 x 27.5 12.25 79 BP-3630CD(999 x 826 x 338) (922 x 805 x 289) (968 x 606) (263) (794) (641) (845 x 692) (311)CONTROLDISCONNECTAll measures are in inches, items in parentheses are in millimeters.*Disconnect, fuse block, breaker, yoke, switches, or other internal components are not furnished with enclosure.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com294
Control DisconnectCTechnical Specifications - “Control Disconnect <strong>Enclosures</strong>”“SND/SFD” configuration - Vertical disconnect handle,with pre-mounted controlCSND/SFD ConstructionMaterialGasketStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass insertsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisC2016NOTES:SND/SFDIndustry StandardsUL/cUL 50 File E64358SP Type 1, 3, 3R, 4X, 12NEMA 250 Type 1, 3, 3R, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 3R, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixCONTROLDISCONNECTSND/SFD AccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 330Carbon Steel BP__CS pg. 330Fiberglass BP__FG pg. 330Stainless Steel BP__SS pg. 330Special AccessoriesDrain Vents pg. 323Louver pg. 325Assorted hubs and cord grips pg. 327, 328Vapor capsule pg. 326SND/SFDModifications See Special ModRight Modification on pg 315 - 322ORDERING INFODoor brace pg. 336Grounding studs pg. 339Molded in color pg. 315 - 322Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom windows pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322295<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“Control Disconnect <strong>Enclosures</strong>” “SND/SNF” Configuration Technical DrawingsWFC1610 shownBOJH E MAKAAB<strong>SE</strong>CTION B-BNCDBL<strong>SE</strong>CTION A-A“Control Disconnect <strong>Enclosures</strong>” - Square D Disconnect SwitchesDisconnect Switch Class 9422, Operating yoke not requiredENCLOSURES WITH NON-FUSIBLE SQUARE D DISCONNECT SWITCHESNON-FUSIBLEDISCONNECT SIZE TYPECATALOG #WITH 240V SWITCHCATALOG #WITH 600V SWITCH30 AMP RC/TC C1610SND3024 C1610SND306060 AMP TD C1610SND6024 C1610SND6060100 AMP TE C2412SND1024 C2412SND1060200 AMP TF C3024SND2024 C3024SND2060CONTROLDISCONNECTENCLOSURES WITH FUSIBLE SQUARE D DISCONNECT SWITCHESFUSIBLE CATALOG # CATALOG #DISCONNECT SIZE TYPE WITH 240V SWITCH WITH 600V SWITCH30 AMP RC/TC C1610SFD3024 C1610SFD306060 AMP TD C1610SFD6024 C1610SFD6060100 AMP TE C2412SFD1024 C2412SFD1060200 AMP TF C3024SFD2024 C3024SFD2060<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com296
Control DisconnectCTechnical Specifications - “Control Disconnect <strong>Enclosures</strong>”“AND/AFD” configuration - Vertical disconnect handle,with pre-mounted controlCAND/AFD ConstructionMaterialGasketStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass insertsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisC2016NOTES:AND/AFDIndustry StandardsUL/cUL 50 File E64358SP Type 1, 3, 3R, 4X, 12NEMA 250 Type 1, 3, 3R, 4X, 12CSA Std 22.2 File LR069014 Type 1, 3, 3R, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixCONTROLDISCONNECTAND/AFD AccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 330Carbon Steel BP__CS pg. 330Fiberglass BP__FG pg. 330Stainless Steel BP__SS pg. 330Special AccessoriesDrain Vents pg. 323Louver pg. 325Assorted hubs and cord grips pg. 327, 328Vapor capsule pg. 326AND/AFDModifications See Special ModRight Modification on pg 315 - 322ORDERING INFODoor brace pg. 336Grounding studs pg. 339Molded in color pg. 315 - 322Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom windows pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322297<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“Control Disconnect <strong>Enclosures</strong>” “AND/AFD” Configuration Technical DrawingsWFC1610 shownBOJH E MAKAAB<strong>SE</strong>CTION B-BNCDBL<strong>SE</strong>CTION A-A“Control Disconnect <strong>Enclosures</strong>” - Allen-Bradley Disconnect SwitchesDisconnect Switch Type 149V, Operating yoke not requiredENCLOSURES WITH NON-FUSIBLE ALLEN-BRADLEY DISCONNECT SWITCHESNON-FUSIBLE CATALOG # CATALOG #DISCONNECT SIZE WITH 240V SWITCH WITH 600V SWITCH30 AMP C1610AND3024 C1610AND306060 AMP C1610AND6024 C1610AND6060100 AMP C2412AND1024 C2412AND1060CONTROLDISCONNECTENCLOSURES WITH FUSIBLE ALLEN-BRADLEY DISCONNECT SWITCHESFUSIBLEDISCONNECT SIZECATALOG #WITH 240V SWITCHCATALOG #WITH 600V SWITCH30 AMP C1610AFD3024 C1610AFD306060 AMP C1610AFD6024 C1610AFD606030 AMP C2412AFD3024 C2412AFD306060 AMP C2412AFD6024 C2412AFD6060100 AMP C2412AFD1024 C2412AFD1060<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com298
Control DisconnectCTechnical Specifications - “Control Disconnect <strong>Enclosures</strong>”“GND/GFD” configuration - Vertical disconnect handle,with pre-mounted controlCGND/GFD ConstructionMaterialGasketStainless Steel HardwareMounting BossesMetal insertsSoft Edge DesignHot compression molded fiberglass reinforced polyesterPoured polyurethane seamless gasket provides watertight,dust-tight environmental seal<strong>300</strong> Series stainless used on all hardwarePanel mounting capability for fixed rear panelAll bosses utilize threaded brass insertsRounded edges, minimal protrusions or exposed pocket areas forassembly of dust and debrisC2016NOTES:GND/GFDIndustry StandardsUL/cUL 50 File E64358SP Type 1, 3, 3R, 4X, 12NEMA 250 Type 1, 3, 3R, 4X, 12CSA Std C22.2 File LR069014 Type 1, 3, 3R, 4X, 12Temperature Range (-40°F to +250°F) (-40°C to +130°C)Flammability Rating UL94-5VWindow Flammability UL94V-0Self Extinguishing<strong>Non</strong>-flame propagatingChemical Resistance Full chemical resistance charts listed in appendixCONTROLDISCONNECTGND/GFD AccessoriesBack PanelsORDERING INFOAluminum BP__AL pg. 330Carbon Steel BP__CS pg. 330Fiberglass BP__FG pg. 330Stainless Steel BP__SS pg. 330Special AccessoriesDrain Vents pg. 323Louver pg. 325Assorted hubs and cord grips pg. 327, 328Vapor capsule pg. 326GND/GFDModifications See Special ModRight Modification on pg 315 - 322ORDERING INFODoor brace pg. 336Grounding studs pg. 339Molded in color pg. 315 - 322Custom painting pg. 315 - 322Silk screening pg. 315 - 322Decals pg. 315 - 322EMI/RFI shielding pg. 315 - 322Custom windows pg. 315 - 322Custom cutouts pg. 315 - 322Custom hole drilling pg. 315 - 322Custom blending pg. 315 - 322299<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“Control Disconnect <strong>Enclosures</strong>” “GND/GFD” Configuration Technical DrawingsWFC1610 shownBOJH E MAKAAB<strong>SE</strong>CTION B-BNCDBL<strong>SE</strong>CTION A-A“Control Disconnect <strong>Enclosures</strong>” - General Electric Disconnect SwitchesDisconnect Switch Type QMW, Operating yoke required: TDOM1B or TDOM2ENCLOSURES WITH NON-FUSIBLE GENERAL ELECTRIC DISCONNECT SWITCHESNON-FUSIBLE CATALOG # CATALOG #DISCONNECT SIZE WITH 240V SWITCH WITH 600V SWITCH30 AMP C2412GND3024 C2412GND306060 AMP C2412GND6024 C2412GND6060100 AMP C2412GND1024 C2412GND1060200 AMP C3024GND2024 C3024GND2060CONTROLDISCONNECTENCLOSURES WITH FUSIBLE GENERAL ELECTRIC DISCONNECT SWITCHESFUSIBLEDISCONNECT SIZECATALOG #WITH 240V SWITCHCATALOG #WITH 600V SWITCH30 AMP C2412GFD3024 C2412GFD306060 AMP C2412GFD6024 C2412GFD6060100 AMP C2412GFD1024 C2412GFD1060200 AMP C3024GFD2024 C3024GFD2060<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com<strong>300</strong>
“Control Circuit Breaker <strong>Enclosures</strong>” C“Control Circuit Breaker <strong>Enclosures</strong>” Shared CharacteristicsControl Circuit Breakerenclosures are used where adisconnect means using acircuit breaker is desirable andthe application involves severeenvironmental conditions. ThisType 4X rated product isdesigned to meet the rigorous demands ofindoor and outdoor applications. A disconnect means using a circuitbreaker in an environmentally sealed package is the natural choicefor process control locations. The enclosures maintain a watertight,corrosion resistant protection against a range of chemicals,windblown dust, rain, sleet and external ice formation.ConstructionMaterialGasketStainless Steel HardwareLink lock latchesMounting BossesMetal insertsIntegral Mounting FeetRigid Side WallsLight Gray ColorHot compression molded fiberglassreinforced polyesterPoured polyurethane seamless gasket<strong>300</strong> Series stainless used on allhardwareEase of entry into enclosurePanel mounting capability for fixed rearpanelAll bosses utilize threaded brass insertsEase of installation on all wall mountproductsExcellent mechanical strength forcomponent mountingPleasing aesthetics for any applicationPhysical CharacteristicsCONTROLDISCONNECTFamilyIDSizeIDOrdering Information - Deriving <strong>Catalog</strong> NumbersConfig.IDAmp Poles Volts EXAMPLEC 2412 WCB 15 - 3 2 “C2412WCB15-32”“Control Circuit Breaker <strong>Enclosures</strong>” - Ordering InformationSize ID H x W x D Optional Panel #C1610 16 x 10 x 8 BP1610CDC2016 20 x 16 x 9 BP2016CDC2412 24 x 12 x 11 BP2412CDC2424 24 x 24 x 11 BP2424CDC3024 30 x 24 x 11 BP3024CDC3630 36 x 30 x 11 BP3630CDOptional back panels available in various materials. See page 330<strong>Non</strong> corrosiveWater-tightDust-tightImpact resistant<strong>Non</strong> ConductiveLight weightUV resistantWorkable materialEasy maintenancePleasing aestheticsColor/FinishStands up to an exceptionally broadrange of chemical exposuresAs designated on Type 4X enclosuresResults in an environmentally sealed,environmentally sound spaceResilient material with high impactresistanceDouble insulated material. No incidentalelectrical contactSolid construction in a lightweightdesignMinimizes the affects of sunlightCuts, drills, punches, and saws withease and accuracyScratches and gouges can be restoredwith a petroleum jelly productSmooth lines, soft colors easily blendinto customer’s design conceptsSmooth surface, no color variations,swirls, or color pockets, no voids.“Control Circuit Breaker <strong>Enclosures</strong>” - Configurations/DefinitionsEnclosure, disconnect mechanism and mounted, specified circuit breakerConfigurationIDDESCRIPTIONSCB- Square D circuit breakerWCB- Westinghouse circuit breakerGCB- General Electric circuit breakerIndustry StandardsUL/cUL 50NEMA 250CSA Std C22.2Temperature RangeFlammability RatingWindow flammabilitySelf extinguishingChemical ResistanceFile E64358SPType 1, 3, 3R, 4X, 12 as designatedType 1, 3, 3R, 4X, 12 as designatedFile LR069014Type 1, 3, 3R, 4X, 12 as designated(-40°F to +250°F) (-40°C to +130°C)UL94-5VUL94V-0<strong>Non</strong>-flame propagatingFull chemical resistance charts listed inappendix301<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
“Control Circuit Breaker <strong>Enclosures</strong>” ConfigurationsCSCB-WCB-GCB-Control Circuit Breaker <strong>Enclosures</strong> with pre-mounted controlSquare D circuit breaker assemblyWestinghouse circuit breaker assemblyGeneral Electric circuit breaker assemblyDesign Features● Pre-mounted disconnect handles with name brand circuit breaker mechanism● Environmentally sealed vertical disconnect handle● Memory retaining polyurethane gasketing● Rigid body construction and watertight seal● Molded in panel mounting inserts● Integral mounting feet for ease of installationC2016CControl Circuit Breaker YokesRN Square D 100 amp ratingRP Square D 250 amp rating1494 M40 Allen Bradley 100 amp rating1494 M50 Allen Bradley 250 amp ratingTDOM General Electric variousCircuit breakers rely on an external detection systemas a means of triggering a disconnect mechanism.Design Features● Rated for indoor service, 600volt class applications● Typical brass secondary connection screw for easy installation● Mounting provisions incorporated in design or by optional bracket● Various opening sizes available for installation over most cable applicationsCONTROLDISCONNECT<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com302
Circuit Breaker <strong>Enclosures</strong> Technical ChartsClass 9422. Yoke required to operate appropriate breaker must be ordered separately.Frames:Operating Yoke Number:100 amp 240V FAL, 480V FAL, 600V FAL 100 amp frame A RN-1“Circuit Breaker <strong>Enclosures</strong>” with Square D Circuit Breakers, 100 amp Frame100 A Frame Circuit Breaker Enclosure <strong>Catalog</strong> NumbersCircuit BreakerVoltagePOLES AMP 240 VAC 480 VAC 600 VAC3 15* C2412SCB15-32 C2412SCB15-34 C2412SCB15-363 20* C2412SCB20-32 C2412SCB20-34 C2412SCB20-363 25* C2412SCB25-32 C2412SCB25-34 C2412SCB25-363 30* C2412SCB30-32 C2412SCB30-34 C2412SCB30-363 35* C2412SCB35-32 C2412SCB35-34 C2412SCB35-363 40* C2412SCB40-32 C2412SCB40-34 C2412SCB40-363 50* C2412SCB50-32 C2412SCB50-34 C2412SCB50-363 70 C2412SCB70-32 C2412SCB70-34 C2412SCB70-363 80 C2412SCB80-32 C2412SCB80-34 C2412SCB80-363 90 C2412SCB90-32 C2412SCB90-34 C2412SCB90-363 100 C2412SCB100-32 C2412SCB100-34 C2412SCB100-36*C1610C alternate for above to 50 Amp onlyCONTROLDISCONNECTClass 9422. Yoke required to operate appropriate breaker must be ordered separately.Frames:Operating Yoke Number:250 amp 600V KAL 250 amp frame A RP-1“Circuit Breaker <strong>Enclosures</strong>” with Square D Circuit Breakers, 250 amp Frame250 A Frame Circuit Breaker Enclosure <strong>Catalog</strong> NumbersCircuit BreakerVoltagePOLES AMP 600 VAC3 110 C3024SCB110-363 125 C3024SCB125-363 150 C3024SCB150-363 175 C3024SCB175-363 200 C3024SCB200-363 225 C3024SCB225-36303<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Circuit Breaker <strong>Enclosures</strong> Technical ChartsYoke required to operate appropriate breaker must be ordered separately.Frames:Operating Yoke Number:100 amp 240V EB, 480V EHB, 600V FB 100 amp frame 1494V M-40“Circuit Breaker <strong>Enclosures</strong>” with Westinghouse Circuit Breakers, 100 amp Frame100 A Frame Circuit Breaker Enclosure <strong>Catalog</strong> NumbersCircuit BreakerVoltagePOLES AMP 240 VAC 480 VAC 600 VAC3 15 C2412WCB15-32 C2412WCB15-34 C2412WCB15-363 20 C2412WCB20-32 C2412SWB20-34 C2412WCB20-363 25 C2412WCB25-32 C2412WCB25-34 C2412WCB25-363 30 C2412WCB30-32 C2412WCB30-34 C2412WCB30-363 35 C2412WCB35-32 C2412WCB35-34 C2412WCB35-363 40 C2412WCB40-32 C2412WCB40-34 C2412WCB40-363 50 C2412WCB50-32 C2412WCB50-34 C2412WCB50-363 70 C2412WCB70-32 C2412WCB70-34 C2412WCB70-363 80 C2412WCB80-32 C2412WCB80-34 C2412WCB80-363 90 C2412WCB90-32 C2412WCB90-34 C2412WCB90-363 100 C2412WCB100-32 C2412WCB100-34 C2412WCB100-36Yoke required to operate appropriate breaker must be ordered separately.Frames:Operating Yoke Number:250 amp 600V-JD 250 amp frame 1494V-M50CONTROLDISCONNECT“Circuit Breaker <strong>Enclosures</strong>” with Westinghouse Circuit Breakers, 250 amp Frame250 A Frame Circuit Breaker Enclosure <strong>Catalog</strong> NumbersCircuit BreakerVoltagePOLES AMP 600 VAC3 110 C3024WCB110-363 125 C3024WCB125-363 150 C3024WCB150-363 175 C3024WCB175-363 200 C3024WCB200-363 225 C3024WCB225-36<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com304
Circuit Breaker <strong>Enclosures</strong> Technical ChartsYoke required to operate appropriate breaker must be ordered separately.Frames:Operating Yoke Number:100 amp 240V TEB, 480V TED, 600V TED 100 amp frame TDOM-1A“Circuit Breaker <strong>Enclosures</strong>” with General Electric Circuit Breakers, 100 amp Frame100 A Frame Circuit Breaker Enclosure <strong>Catalog</strong> NumbersCircuit BreakerVoltagePOLES AMP 240 VAC 480 VAC 600 VAC3 15 C2412GCB15-32 C2412GCB15-34 C2412GCB15-363 20 C2412GCB20-32 C2412GCB20-34 C2412GCB20-363 25 C2412GCB25-32 C2412GCB25-34 C2412GCB25-363 30 C2412GCB30-32 C2412GCB30-34 C2412GCB30-363 35 C2412GCB35-32 C2412GCB35-34 C2412GCB35-363 40 C2412GCB40-32 C2412GCB40-34 C2412GCB40-363 50 C2412GCB50-32 C2412GCB50-34 C2412GCB50-363 70 C2412GCB70-32 C2412GCB70-34 C2412GCB70-363 80 C2412GCB80-32 C2412GCB80-34 C2412GCB80-363 90 C2412GCB90-32 C2412GCB90-34 C2412GCB90-363 100 C2412GCB100-32 C2412GCB100-34 C2412GCB100-36CONTROLDISCONNECTYoke required to operate appropriate breaker must be ordered separately.Frames:Operating Yoke Number:225 amp 600V TFK 200 amp frame TDOM-3“Circuit Breaker <strong>Enclosures</strong>” with General Electric Circuit Breakers, 250 amp Frame250 A Frame Circuit Breaker Enclosure <strong>Catalog</strong> NumbersCircuit BreakerVoltagePOLES AMP 600 VAC3 110 C3024GCB110-363 125 C3024GCB125-363 150 C3024GCB150-363 175 C3024GCB175-363 200 C3024GCB200-363 225 C3024GCB225-36*Note: All General Electric 225 amp units listed above are special order items. Contact factory.305<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
<strong>Stahlin</strong> <strong>Enclosures</strong> - Plant TourCONTROLDISCONNECT<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com306
Combination Starter <strong>Enclosures</strong> Technical ChartsCCombination StartersControl Combination Starter enclosures are used where a disconnect means in conjunction with a combination starter ispreferable and the application involves severe environmental conditions. The following information is for reference only.<strong>Enclosures</strong> are available from <strong>Stahlin</strong> and the combination starters are commercially available through electrical distributionoutlets. <strong>Stahlin</strong> enclosures maintain a watertight, corrosion resistant protection against a range of chemicals, windblown dust,rain, sleet and external ice formation.Combination StartersCombination Motor Starters, NEMA Sizes 1 - 4, Disconnect Type <strong>Enclosures</strong>ENCLOSURESTARTERSIZE(LESS DISCONNECT& STARTER) AMPSQUARE DTYPEALLEN BRADLEYTYPEGENERAL ELECTRICTYPE1 C2016 30 RC / TC 1494 N / A1 C2412 30 RC / TC N/A QMW2 C2412 60 TD 1494 QMW3 C3024 100 TE / TF 1494 QMW4 C3630 200 TF N / A QMW<strong>Enclosures</strong> are sized for fusible disconnects and may be oversized for non-fusible disconnects.CONTROLDISCONNECT307<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Combination Starter <strong>Enclosures</strong> Technical ChartsCombination StartersCombination Motor Starters, NEMA Sizes 1 - 4, Disconnect Type <strong>Enclosures</strong>ENCLOSURE SQUARE D ALLEN BRADLEY GENERAL WESTINGHOU<strong>SE</strong> CUTLER-HAMMERSTARTER (LESS DISCONNECT, AMP AMP ELECTRIC AMP AMP AMPSIZE CIRCUIT BREAKER & STARTER) FRAME TYPE FRAME TYPE FRAME TYPE FRAME TYPE FRAME TYPE0 C2412 100 FAL/FHL 150 Gen. Elec. 150 TEB/TBI/ 100 EB/FHD/ 150 FS/FHTED/THED/TEC TEL/THLC1 FD/FDB/MCPWestinghouse EB/FHD/FD/FDB/MCP0 C2412 100 FAL/FHL 150 Gen. Elec. 150 TEB/TBI 100 EB/FHD/FD/ 150 FS/FHTED/THED/TEC TEL/THLC1 FDB/MCPWestinghouse EB/FHD/FD/FDB/MCP1 C2412 100 FAL/FHL 150 Gen. Elec. 150 TEB/TBI/ 100 EB/FHD/FD/ 150 FS/FHTED/THED/TEC TEL/THLC1 FDB/MCPWestinghouse EB/FHD/FD/FDB/MCP1 C2412 100 FAL/FHL 150 Gen. Elec. 150 TEB/TBI/ 100 EB/FHD/ 150 FS/FHTED/THED/TEC TEL/THLC1 FD/FDB/MCPWestinghouse EB/FHD/FD/FDB/MCP2 C2412 100 FAL/FHL 150 Gen. Elec. 150 TEB/TBI/ 100 EB/FHD/ 150 FS/FHTED/THD/TEC TEL/THLC1 FD/FDB/MCPWestinghouse EB/FHD/FD/FDB/MCP2 C3024 100 FAL/FHL 150 Gen. Elec. 150 TEB/TBI/ 100 EB/FHD/ 150 FS/FHTED/THED/TEC TEL/THLC1 FD/FDB/MCPWestinghouse EB/FHD/FD/FDB/MCP3 C3024 100 FAL/FHL 150 Gen. Elec. 150 TEB/TBI/ 100 EB/FHD/ 150 FS/FHTED/THED/TEC TEL/THLC1 FD/FDB/MCPWestinghouse EB/FHD/FD/FDB/MCP3 C3630 100 FAL/FHL 150 Gen. Elec. 150 TEB/TBI/ 100 EB/FHD/ 150 FS/FHTED/THED/TEC TEL/THLC1 FD/FDB/MCPWestinghouse EB/FHD/FD/FDB/MCP4 C3630 100 FAL/FHL 150 Gen. Elec. 150 TEB/TBI/ 100 EB/FHD/ 150 FS/FHTED/THED/TEC TEL/THLC1 FD/FDB/MCP4 C3630 250 KAL/ 250 Westinghouse 225 TFJ/TFK/TFL 250 B/KB/ 250 JSKHL/IKL JB/JK MCP/JDCONTROLDISCONNECT<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com308
Trough, Wireway & StrutTrough, Wireway & Strut<strong>Stahlin</strong> offers a broad range of auxiliary products designed to complement a full non metallic wiring system. Wire managementthrough a corrosion resistant system requires a thoroughfare of chemically resistant and environmentally protective materials.Fiberglass wireway is designed to protect point to point wiring in highly corrosive environments such as plating rooms, solder bathareas, rendering & cutting areas and chemical processing. By its description, wireway is sold in multiple lengths and is joined withother lengths of wireway through a series of fittings designed to cover an expanse. The system is not rated for the ingress ofmoisture but is suitable for both indoor and outdoor use.Pultruded fiberglass trough is identical to wireway except that it is made to adefined length. As a result, the product consists of six specific lengthsand has sealed end caps to close off each end. Trough productsinclude a polyurethane gasket in a snap cover that attacheswithout screws. It is designed to accommodate some metaltrough accessories and can be custom supplied withmounting feet.An additional form of pultruded fiberglass is usedfor strut, a common mounting and support systemfor both trough, wireway and enclosures. <strong>Stahlin</strong>strut is available with hanger rod, washers & nuts,beam clamps, strut cover, strut buckles and endsealant. It is sold in ten foot lengths.Wireway Featured Highlights& Trough PolyurethaneGasketSnap On Coverwithout ScrewsTrough, Wireway & Strut Attributes●Pultruded fiberglass productsPhysical Protection●Polyurethane gasket●●Available with mounting feetComplete line of accessory fittingsavailable for wirewayEnvironmentalProtectionTROUGH,WIREWAY & STRUT●High temperature, non corrosive,environmental designsAdd On Mounting FeetTrough, Wireway & Strut Specifications●Corrosion Resistant●Fire resistant●Rigid Mechanical protectionTrough, Wireway & Strut are Applicable for Many Industries including:Circuit BoardDevelopmentPlating IndustryRendering PlantsWater &Wastewater Processing
TROUGH,WIREWAY & STRUTTrough & Wireway● 6" x 6" trough & wireway● Available in six common lengths● Snap lock cover without screws● Polyurethane gasket● Add on mounting feet
Fiberglass WirewayWWWWFiberglass WirewayFiberglass wireway is the perfect complement to wall mount control systems as anenvironmentally sound wiring pathway with both strength characteristics and corrosionresistance. <strong>Stahlin</strong> fiberglass wireway is well suited as a protective pathway betweennon metallic enclosures in applications such as greenhouses, livestock installations,plating rooms and printed circuit board manufacturing. The product features a six by sixsize in a variety of lengths with a full complement of fittings for typical plant installations.WW6636Fiberglass Wireway DimensionsSIZE IDNUMBERINSIDE DIMENSIONSH X W X DOUTSIDE DIMENSIONSH X W X D DESCRIPTIONWW6612 6 x 6 x 12 6-3/8 x 6-11/16 x 12-3/8 12" straight section(152 x 152 x 305) (162 x 170 x 314)WW6624 6 x 6 x 24 6-3/8 x 6-11/16 x 24-3/8 24" straight section(152 x 152 x 610) (162 x 170 x 619)WW6636 6 x 6 x 36 6-3/8 x 6-11/16 x 36-3/8 36" straight section(152 x 152 x 914) (162 x 170 x 924)WW6648 6 x 6 x 48 6-3/8 x 6-11/16 x 48-3/8 48" straight section(152 x 152 x 1219) (162 x 170 x 1229)WW6660 6 x 6 x 60 6-3/8 x 6-11/16 x 60-3/8 60" straight section(152 x 152 x 1524) (162 x 170 x 1534)WW66120 6 x 6 x 120 6-3/8 x 6-11/16 x 120-3/8 120" straight section(152 x 152 x 3048) (162 x 170 x 3058)All measures are in inches, items in parentheses are in millimeters.H6645V6645ITROUGH,WIREWAY & STRUTH66TV6645OPA66H66TV6645OC66V6690OV6645IH669IV6690IEP66EP66311<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Fiberglass Wirewaycontinued on following pagesFiberglass Wireway FittingsCATALOG NUMBERDESCRIPTIONC66Coupling with gasket cover and fastenersH66TTee with gasketed coverH6645Horizontal 45º elbowH669IHorizontal 90º elbowV6690IInside vertical 90º elbowV6690OOutside vertical 90º elbowV6645IInside vertical 45º elbowV6645OOutside vertical 45º elbowEP66End platePA66Panel adapterWireway Assembly MaterialsCATALOG NUMBERDESCRIPTIONRTV32clear RTV silicone 3 oz. tubeSS625stainless steel screws #10-24 x 5/8" LongSN104 stainless steel nut #10-24WIREWAY INSTALLATIONIt is recommended that <strong>Stahlin</strong> wireway be supported atintervals not exceeding 10 feet. Vertical runs should besupported at intervals not exceeding 15 feet with no more thanone joint between supports.Joining wireway straight sections is accomplished by placing acoupling (C66) over the outside diameter of the wireway. Thecoupling is predrilled to accept a stainless steel screw. The7/32" diameter holes in the side of the coupling can be used asa template to field drill the end of the wireway. Wireway fittingscan be joined to straight sections in the same manner asjoining straight sections.To provide a seal, run a bead of RTV ® silicone or equivalentaround each coupling (outboard of the fasteners) beforeassembly. End plates are force fit and can be installed asneeded and sealed with RTV silicone.C66 H66T H6690 V6690ITROUGH,WIREWAY & STRUTV6690O V6645I V6645O EP66<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com312
Fiberglass Trough & StrutFTFTFiberglass TroughFiberglass trough is a useful complement to wall mount control systems with the samestrength characteristics and corrosion resistance as <strong>Stahlin</strong> wireway. Made from the samefiberglass pultrusion, trough features permanent end caps as well as a snap lock cover thatforms a solid housing.FT6612Trough is offered as simple protection to wiring from water, oil, dust or corrosive environments,including greenhouses, food processing, plating rooms, pickling and printed circuit boardmanufacturing. The basic offering includes a six by six structure that is available in sixcommon lengths.Fiberglass Trough DimensionsSIZE IDNUMBERINSIDE DIMENSIONSH X W X DOUTSIDE DIMENSIONSH X W X DUNITWEIGHTFT6612 6 x 6 x 12 6-3/8 x 6-5/8 x 12-3/8 4.82 lbs.(152 x 152 x 305) (162 x 168 x 314)FT6624 6 x 6 x 24 6-3/8 x 6-5/8 x 24-3/8 8.61 lbs.(152 x 152 x 610) (162 x 168 x 619)FT6636 6 x 6 x 36 6-3/8 x 6-5/8 x 36-3/8 12.40 lbs.(152 x 152 x 914) (162 x 168 x 924)FT6648 6 x 6 x 48 6-3/8 x 6-5/8 x 48-3/8 16.19 lbs.(152 x 152 x 1219) (162 x 168 x 1229)FT6660 6 x 6 x 60 6-3/8 x 6-5/8 x 60-3/8 19.98 lbs.(152 x 152 x 1524) (162 x 168 x 1534)FT66120 6 x 6 x 120 6-3/8 x 6-5/8 x 120-3/8 40.00 lbs.(152 x 152 x 3048) (162 x 168 x 3058)All measures are in inches, items in parentheses are in millimeters.TROUGH,WIREWAY & STRUT4"3"2"1"PVC Coated Pipe StrapsPARTNUMBERSIZEPBC105-1/2 1/2"PBC105-3/4 3/4"PBC105-1 1"PBC105-11/4 1-1/4"PBC105-11/2 1-1/2"PBC105-2 2"PBC105-21/2 2-1/2"PVC Coated Pipe StrapsPBC105-3 3"PBC105-31/2 3 -1/2"PBC105-4 4"PBC105-5 5"313<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Fiberglass Trough & StrutFiberglass StrutFiberglass strut is the finishing complement to both wireway and trough. Used for bothmounting purposes and support, this rigid pultruded fiberglass mounting system is designedaround three configurations, low profile, medium profile and double profile. A full assortmentof accessories from beam clamps to strut cover is available. This rigid support system incompletely corrosion resistant.20P2100FIBERGLASS STRUTStrutSIZE ID SIZE HOLE WEIGHTNUMBER (INCHES) DIMENSION/TAPPING PER 100' STRUT20P2100 10' length N/A 130.0020P2000 10' length N/A 65.020P1000 10' length N/A 52.0<strong>Non</strong>-<strong>Metallic</strong> Hanger Rod (All Thread).1875 [4.76mm]3.25 [82.55mm].1875 [4.76mm]1.63 [41.28mm]1.25 [31.75mm]1.531 [38.89mm]2003-828-8 1/2 - 13 . 96" N/A 12.0200-3829-8 5/8 - 13/ 96" N/A 18.0<strong>Non</strong>-<strong>Metallic</strong> Hanger Rod Washers.188 + .005.438 [11.11mm].75[19.05mm].438 [11.11mm]500E-999 1' diameter 1/2" N/A1/16" thickness625E-999 1/12" diameter 5/8" N/A1/16" diameter<strong>Non</strong>-<strong>Metallic</strong> Hanger Rod Nut.1875 [4.76mm].1875 [4.76mm]20P20001.63 [41.28mm]1.25 [31.75mm]500PU-000 1/2-13 hex N/A N/A625PU-000 5/8-13 hex N/A N/A<strong>Non</strong>-<strong>Metallic</strong> Strut Cover20E-5000 snap in N/A N/A<strong>Non</strong>-<strong>Metallic</strong> Strut Nut500PU-CNH-D 1/2-13 N/A N/A1.63 [41.28mm].438 [11.11mm].75[19.05mm].438 [11.11mm]TROUGH,WIREWAY & STRUTPVC Coated Beam ClampRGBC2 1" jaw opening 1/2-13 N/ARGCB3 1" jaw opening 5/8-13 N/AEnd Sealant.125 [3.18mm].125 [3.18mm]20P10001.50 [38.10mm]1.25 [31.75mm]600-2200 40 oz. spray can N/A N/A1.13 [28.58mm]AES1 quart can N/A N/A.375 [9.52mm].75[19.05mm].375 [9.52mm]<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com314
ModRight ModificationsModRight Services<strong>Stahlin</strong> <strong>Enclosures</strong> prides itself in its willingness and ability to meet the enclosuremodification needs of customers. The combination of technologically advanced equipment anda sound procedure for handling the most detailed modification allows <strong>Stahlin</strong> <strong>Enclosures</strong> toprocess modifications on time, and to the highest quality standards in the industry.Modifications can be mixed and matched in anendless number of combinations. They can takethe form of:Featured HighlightsModRight Standard Enclosure●●●●●●●●●●●custom sizesspecial hole patterns in doors,panels, and boxescustom windowscustom molded-in colorsdoor locksswitches and devicesdeadfronts and subpanelssilk screeningRFI and EMI shieldingcustom molded doorsother special requestsCustom Molded-InColorCustom WindowCustom MoldedCoverCustom Hole CutoutsCustom DesignMaintaining RatingRestrictionsModRightTo receive a quotation and further information about <strong>Stahlin</strong> <strong>Enclosures</strong>’ modificationprogram, consult a sales representative.ModRight Program - Program details coverd on the following pages.
ModRight<strong>Stahlin</strong>'s ModRight program can solveyour custom needs.The above enclosure is an exampleartists rendering illustrating some of the custommodifications available.
ModRight Enclosure Modification CapabilitiesCThis <strong>Stahlin</strong> catalog is devoted to practical applicationsand solutions to enclosure problems. A variety of off-theshelfproducts are available to solve common industryrelated problems. <strong>Stahlin</strong> ModRight Program is designedto support you in very uncommon or complex applications.When you need to pick up the phone for additionalassistance, think <strong>Stahlin</strong> ModRight!The ModRight program is multi faceted and designed tomeet a range of unique requirements from simple holedrilling to full custom blend of fiberglass material. Here’show it works. A prospective user sees a preferredenclosure shape in the form of a <strong>Stahlin</strong> Classic enclosure.However, the user seeks a distinctive custom molded look.<strong>Stahlin</strong> will work with you to custom formulate the sheetmolding compound with the attributes that you require forUV, flame retardation, infestation resistance, you name it.The ProRight Program offers the capability ofprototyping a unique design through the hand layupprocess or low volume molding. <strong>Product</strong> can be pretestedfor its effectiveness before large volumes ofproduct are produced.A prototype of the customer's specific formulation canalso be field tested for its effectiveness. This processinsures a correct formulation and customer satisfactionwith the results.ModRightThe DesignRight Program will take your customconcept, perhaps your embossed logo or a completelycustom cover design, and conform it to an existingClassic enclosure. The result is your custom coveron a "standard" Classic base.The same prospective user has a unique requirementfor UV protection of a substantially greater proportion thanis built in to the standard fiberglass enclosure.The FormRight Program is available for custommaterial formulation to match your unique requirements.The ModRight Program offers a complete range ofstandard and unique modifications that make a usefulconfiguration right out of the carton available.In addition to the cutouts and windows, thecustomer seeks to have a terminal block, connectorsand a small component pre-mounted to the back panelprior to shipping.The BuildRight Program accommodates custommanufacturing and component assembly to deliver exactlythe configuration that you desire and the time of shipping.317<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
ModRight Enclosure Modification CapabilitiesNaturally, all of these additional operations reflectdifferent costs than the standard simple enclosure.The CostRight Program will help you determinebeforehand how cost effective the pre-assembly canbe. Prices are agreed to up front at an industrycompetitive rate.When the customer is satisfied that this is both anefficient and economical method of transacting business,there is still the issue of product deliveries.The ShipRight Program evaluates current shippingrequirements and offers "when-needed" and on timedeliveries in an agreed upon manner. Bulk shipping andquantity requirements are considered under this program.This is the total package: from the basic productthrough all of its custom required changes, to themoment it arrives at your doorstep for installation intoyour application, <strong>Stahlin</strong> ModRight Program offersstandard and custom assistance for your every need.You only need to pick up the phone to speak to ourhelpful engineering staff.Enclosure SpecificDoor Brace“N” SeriesGasketed Window“J” Series & “N” SeriesModRightCustom Molded ColorsPVC Louver PlatePVC Drain VentGrounding Jam Nut<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com318
The “Gasketed Window”J, RJ, NThe requirements of the electrical and electronic marketplace for visual feedbackof internally mounted components have created new demands on enclosuremanufacturers. It is important to have not only visual access to enclosure contentsbut to maintain the same environmental seal as an opaque cover.<strong>Stahlin</strong> offers three major styles of window solutions. The most common is a flushmounted, bonded window that is received when ordering the “JW” or “RJW” styleproduct. Bonded windows feature a UVA scratch & abrasion resistant acrylic andare offered in standard and custom sizes as required.<strong>Stahlin</strong>’s Gasketed Window Series utilizes a 1/8" plexiglass or acrylic window heldin place with a full neoprene gasket. This window is offered as a centered full sizewindow and is identifiable by the prominence of the gasket itself. The style is offered onthe “J” and “RJ” series as well as Control Enclosure “N” series. Ratings on this style are thesame as the bonded window and the style is offered as a matter of cosmetic preference only. The following table describes theappropriate size window for the size range of the enclosure.“J” and “RJ” and “Control Enclosure” series with gasketed windows are designed for general electrical and electronic applicationsrequiring component visibility in harsh or corrosive environments. The gasketed window option is available as a modification only.Ordering Information - Factory Modification Only1. Choose “J” “RJ” or “Control Enclosure” as noted2. Select available window size from tables3. Request: “Gasketed Window Option” when ordering4. Window will be centered unless otherwise specifiedModRightGasketed Window Series Specifications● Water tight● Corrosion Resistant● Fire resistant“J” and “RJ” and “Control Enclosure” SeriesGasketed Window Attributes● Heavy neoprene window retention gasket● 1/8" plexiglass or UVA acrylic windows available perspecification●Light weight<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com319
“Gasketed Window”Gasketed Windows for J Series Fiberglass <strong>Enclosures</strong>Part Number Window Size RJ1008 RJ1210 RJ1212 RJ1412 RJ1614 RJ1816 RJ2016(add as suffix) H x W J1008 J1210 J1212 J1412 J1614 J1816 J2016W01 7 X 5 X X X X X X XW02 7 X 6* X X X X X X XW03 8 X 6 N/A X X X X X XW04 9 X 7 N/A X X X X X XW05 9 X 8 N/A N/A X X X X XW06 9 X 9 N/A N/A X X X X XW07 10 X 9 N/A N/A N/A X X X XW08 11 X 9 N/A N/A N/A X X X XW09 11 X 10 N/A N/A N/A N/A X X XW10 12 X 10 N/A N/A N/A N/A X X XW11 13 X 10 N/A N/A N/A N/A X X XW12 12 X 11 N/A N/A N/A N/A X X XW13 13 X 11 N/A N/A N/A N/A X X XW14 15 X 13 N/A N/A N/A N/A N/A X XModRightN/A - Not Available*N/A - Not available for RJ1008<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com320
N Series Gasketed WindowModRightGasketed Windows for N Series <strong>Enclosures</strong>Part Number(add as suffix)WINDOW SIZEH X W N2016 N2420 N2424 N3020 N3024 N3630W21 7 x 7 X X X X X XW22 11 x 7 X X X X X XW23 13 x 7 X X X X X XW24 15 x 7 N/A X X X X XW25 17 x 7 N/A X X X X XW26 19 x 7 N/A X X X X XW27 8 x 8 X X X X X XW28 10 x 8 X X X X X XW29 12 x 8 X X X X X XW30 14 x 8 X X X X X XW31 13 x 9 X X X X X XW32 15 x 9 N/A X X X X XW33 10 x 10 N/A X X X X XW34 14 x 10 N/A X X X X XW35 16 x 10 N/A X X X X XW36 11 x 11 N/A X X X X XW37 15 x 11 N/A X X X X XW38 17 x 11 N/A X X X X XW39 12 x 12 N/A X X X X XW40 14 x 12 N/A X X X X XW41 16 x 12 N/A X X X X XW42 18 x 12 N/A N/A N/A X X XW43 13 x 13 N/A N/A X X X XW44 15 x 13 N/A N/A X X X XW45 17 x 13 N/A N/A X X X XW46 19 x 13 N/A N/A N/A X X XW47 21 x 13 N/A N/A N/A X X XW48 14 x 14 N/A N/A X X X XW49 16 x 14 N/A N/A X X X XW50 18 x 14 N/A N/A N/A X X XW505 20 x 13 N/A N/A N/A X X XW51 20 x 14 N/A N/A N/A N/A X XW515 22 x 13 N/A N/A N/A X X XW52 22 x 14 N/A N/A N/A N/A X XW525 23 x 13 N/A N/A N/A X X XW53 23 x 14 N/A N/A N/A N/A X XW535 24 x 14 N/A N/A N/A N/A N/A XW54 15 x 15 N/A N/A X N/A X XW55 17 x 15 N/A N/A N/A N/A X XW56 19 x 15 N/A N/A N/A N/A X XW57 21 x 15 N/A N/A N/A N/A X XW58 23 x 15 N/A N/A N/A N/A X XW59 25 x 15 N/A N/A N/A N/A N/A XConsult factory for window use with FHLRT and FHLWT. Gasketed Window Exception - not applicable to narrow range sizes.N/A - Not Available321<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
N Series Gasketed WindowGasketed Windows for N Series <strong>Enclosures</strong>Part Number(add as suffix)WINDOW SIZEH X W N2016 N2420 N2424 N3020 N3024 N3630W60 16 x 16 N/A N/A X N/A X XW61 18 x 16 N/A N/A N/A N/A X XW62 20 x 16 N/A N/A N/A N/A X XW63 22 x 16 N/A N/A N/A N/A X XW64 24 x 16 N/A N/A N/A N/A N/A XW65 26 x 16 N/A N/A N/A N/A N/A XW66 17 x 17 N/A N/A N/A N/A X XW67 19 x 17 N/A N/A N/A N/A X XW68 21 x 17 N/A N/A N/A N/A X XW69 23 x 17 N/A N/A N/A N/A X XW70 25 x 17 N/A N/A N/A N/A N/A XW71 27 x 17 N/A N/A N/A N/A N/A XW72 18 x 18 N/A N/A N/A N/A N/A XW73 20 x 18 N/A N/A N/A N/A N/A XW74 22 x 18 N/A N/A N/A N/A N/A XW75 24 x 18 N/A N/A N/A N/A N/A XW76 26 x 18 N/A N/A N/A N/A N/A XW77 28 x 18 N/A N/A N/A N/A N/A XW78 19 x 19 N/A N/A N/A N/A N/A XW79 21 x 19 N/A N/A N/A N/A N/A XW80 23 x 19 N/A N/A N/A N/A N/A XW81 25 x 19 N/A N/A N/A N/A N/A XW82 27 x 19 N/A N/A N/A N/A N/A XW83 29 x 19 N/A N/A N/A N/A N/A XW84 22 x 20 N/A N/A N/A N/A N/A XW85 24 x 20 N/A N/A N/A N/A N/A XW86 26 x 20 N/A N/A N/A N/A N/A XW87 28 x 20 N/A N/A N/A N/A N/A XW88 21 x 21 N/A N/A N/A N/A N/A XW89 23 x 21 N/A N/A N/A N/A N/A XW90 25 x 21 N/A N/A N/A N/A N/A XW91 27 x 21 N/A N/A N/A N/A N/A XW92 29 x 21 N/A N/A N/A N/A N/A XW93 22 x 22 N/A N/A N/A N/A N/A XW94 24 x 22 N/A N/A N/A N/A N/A XW95 26 x 22 N/A N/A N/A N/A N/A XW96 28 x 22 N/A N/A N/A N/A N/A XW97 23 x 23 N/A N/A N/A N/A N/A XW98 25 x 23 N/A N/A N/A N/A N/A XW99 27 x 23 N/A N/A N/A N/A N/A XW100 29 x 23 N/A N/A N/A N/A N/A XW101 42 x 29 AVAILABLE IN N4836 <strong>SE</strong>RIES ONLYModRightConsult factory for window use with FHLRT and FHLWT. Gasketed Window Exception - not applicable to narrow range sizes.N/A - Not Available<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com322
General Accessories<strong>Stahlin</strong> Enclosure Accessories<strong>Stahlin</strong> enclosures are created in standard forms and shapes, but the ability to customize into unique end user configurations may bethe single best reason to buy <strong>Stahlin</strong> products. Certain accessories are available by part number and can be added at the time of theenclosure purchase, or added later as a separate item.By comparison, modifications are considerably more complex and end user specific and they must be implemented before theenclosure leaves the factory. All items listed as Accessories are available as separately priced items. All services designatedModifications must be requested at the time of order placement.Breather Vent ChartIndiciated in GREENBreather VentBV4XKITBreather Vent<strong>Stahlin</strong>’s new non-metallic Breather Vent allowsan enclosure to “breathe” — literally allowing thefree passage of air while maintaining UL Type 4xenclosure integrity as a recognized component.MODEL NUMBER UPC CODESBV4XKIT 80021Drain VentDV4XKITDrain Vent<strong>Stahlin</strong>’s new non-metallic Drain Vent reliablyprotects electrical equipment housed inside anenclosure by properly draining unwantedmoisture or accumulated water from within,while maintaining UL Type 4x enclosure integrityas a recognized component.MODEL NUMBER UPC CODESDV4XKIT 80020Drain Vent ChartIndiciated in BlackACCESSORIES323<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
General Accessoriescontinued on following pagesRigid Metal Conduit HubsPRSTGPVC Coated HubsFor connections using PVCcoated conduit, Plasti-bond Redhubs are available in tenstandard sizes of 1/2" through 4"Plasti-Bond Red HubsCATALOGNUMBERSIZEPRSTG1 1/2"PRSTG2 3/4"PRSTG3 1"PRSTG4 1 1 /4"PRSTG5 1 1 /2"PRSTG6 2"PRSTG7 2 1 /2"PRSTG8 3"PRSTG9 3 1 /2"PRSTG10 4"Aluminum & PVC Conduit HubsM Aluminum Hubs<strong>Metallic</strong> conduit connections can be made with the use of an aluminum hub available in seven standard sizes from 1/2" through 3".Aluminum HubsCATALOGNUMBERINSIDEDIAMETERHOLE6DIAMETERM50 1/2" 7/8"M75 3/4" 11/16"M100 1" 11/4"M125 1 1 /4" 1 11 /16"M150 1 1 /2" 1 7 /8 “M200 2" 2 3 /8"M<strong>300</strong> 3" 3 7 /16"HPVC Hubs<strong>Non</strong>-metallic conduit connections can be made with the use of a PVC hub available in six standard sizes from 1/2" through 2".PVC HubsCATALOGNUMBERINSIDEDIAMETERHOLE6DIAMETERH50 1/2" 7/8"H75 3/4" 1 1 /16"H100 1" 1 1 /4"H125 1 1 /4" 1 11 /16"H150 1 1 /2" 2"H200 2" 2 7 /16"ACCESSORIES<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com324
General AccessoriesLouver Plate VentLPK3KIT Louver Plate VentLouver Plate VentLPK3KITDrain & VentDVK3KITDrain & VentDrain & VentDVK3KITEncapsulated ScrewsWP2PKENCAPEncapsulated ScrewsEncapsulated ScrewsWP2PKENCAPACCESSORIESStainless Steel ScrewsSSStainless Steel ScrewsStainless Steel ScrewsWP4PKSSWP2PKSS325<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
General AccessoriesVapor CapsuleVC2-1Vapor CapsuleVC2-1Vapor Capsulecontinued on following pagesRadius of Protection: 2 ft.Normal Life Span: 1 yr.<strong>Stahlin</strong> Vapor Capsules contain a unique vapor phase inhibitor designed to protectmetallic surfaces within an enclosure against airborne corrosion. By simply placingthese self-contained capsules inside an enclosure the vapors readily permeate everypoint, passivating all metallic surfaces. When the capsule is removed from its sealedpackage, it begins to emit an invisible, non-toxic vapor which is diffused throughout thethe surrounding atmosphere until the air is saturated. The vapor then passivates themetal surfaces against atmospheric corrosion by reducing the electro-chemical activityof the metal surfaces.Plastic Print PocketPRTPKTPlastic Print Pocket<strong>Stahlin</strong>'s Print Pocket is self adhesive and can be utilized to store prints or otherimportant documents within the enclosure.PART No. HEIGHT WIDTH DEPTHPRTPKT 9.29" 10.39" 1.18".Plastic Print PocketPRTPKTCarrying HandleRMEMK109506Carrying HandleCarrying HandleRMEMK109506ACCESSORIES<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com326
General AccessoriesCord Grips HubsCESSigma FeedthroughEasy to install sigma form feedthrough seals provide a watertight, fumetightseal at cable or cord entrances to the enclosure. The nose portion of theseal is designed to be heat-shrunk around the cable, producing awatertight, gas and corrosion resistant seal. Heat gun must be capable ofproducing 250-275 degrees.Meets or exceeds MIL-1-81765/1AAmerican Bureau of Shipping 92-QE-10218-XFor -55˚ to 90˚ C RatingSigma Form Feedthrough SealsCATALOG OVERALL EXPANDED MAXIMUM NUT I.D. DRILLNUMBER NOMINAL I.D. NO<strong>SE</strong> RECOVERED SIZELENGTHI.D.CES-1 2.750 0.500 0.120 0.750 1.000CES-2 2.750 0.750 0.250 0.750 1.000CES-3 3.750 1.200 0.500 1.100 1.380CES-4 4.500 1.700 0.750 1.600 2.000CES-5 6.500 2.700 1.450 2.500 3.375Fiberglass PedestalsFiberglass pedestals are manufactured from the samefiberglass reinforced polyester material that makes up all<strong>Stahlin</strong> enclosures. An access plate on the pedestal bottomoffers the ability to use the internal pedestal as a wireway tothe elevated enclosure. Two configurations are availableincluding a sloping mounting surface for smaller “J” styleenclosures, and a flat surface for large “N” series products.These pedestals are excellent for wet, corrosive areas inmanufacturing facilities or marine environments.ACCESSORIESFiberglass PedestalsCATALOGNUMBERHEIGHT FLOORPLATE DIMENSIONENCLOSUREPLATE DIMENSIONJP3336 36" 7" X 7" 5" X 5"NP4436 36" 8" X 8" 8" X 8"327<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
General Accessories5000Nylon Cord GripNylon cord grips are durable and easy to install. Thebody and sealing nut are manufactured with a tough,impact resistant nylon. Together the nut and washerform a positive sealing grip when installed through anenclosure wall. The oil resistant neoprene grommet andnylon washer fit tightly around an entrance cord,sealing out moisture, dust and foreign materials.NEMA STD FBI-1983UL STD 514 File No. 53599 Type 4, 4XCSA STD 22.2 No. 18 File No. 28985 Type 4, 4XHAZ LOC NEC 501-4(b), 502-4(a)(2), 503-3(a)Class I, Div 2, Class II Div 1 and 2; ClassIII Div 1 and 2Nylon Cord GripCATALOG HUB CABLE INSIDENUMBER DIAMETER DIAMETER BODYRANGE DIAMETER5121 1/2" .187-.250 .6255122 1/2" .250-.312 .6255123 1/2" .312-.375 .6255124 1/2" .375-.437 .6255125 1/2" .437-.500 .6255126* 1/2" .500-.562 .6255127* 1/2" .562-.625 .6255141 3/4" .187-.250 .7885142 3/4" .250-.375 .7885143 3/4" .375-.437 .7885144 3/4" .437-.500 .7885145 3/4" .500-.562 .7885146 3/4" .562-.625 .7885147 3/4" .625-.687 .7885148 3/4" .687-.750 .788*Cable jacket may have to be stripped for clearanceNominal O.D.SIZE TYPE 2COND3COND4COND18 SV-SVT .24 .25 .26SJ-SJO .31 .34 .36S-SO .39 .41 .44SJTO .30 .33 .36STO .38 .39 .4216 SJ-SJO .33 .36 .39S-SO .41 .43 .49SJTO .32 .35 .39STO .39 .42 .4714 SJO .43 .47S-SO .53 .56 .61STO .52 .55 .59BDC .4012 S-SO .61 .64 .67STO .59 .63 .67BDC .4510 S-SO .64 .69 .75STO .64 .68 .74BDC .508 S-SO .79 .90 .97STO .81 .85 .96BDC .686 S-SO .91 .99 1.07STO .95 1.00BDC .804 S-SO 1.09 1.15 1.29STO 1.10 1.15 1.30BDC .942 STO 1.29 1.34BDC 1.08ACCESSORIESDimensional data is taken from various cable manufacturers.It is not guaranteed but usable for general purposes.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com328
Enclosure Specific Accessories - Classic Series Back PanelsAccessories – Enclosure SpecificAluminum (AL)Back PanelsGrade Aluminum<strong>300</strong>3 H14 - No FinishStainless Steel (SS)Back PanelsStainless SteelGrade 304Fiberglass (FG)Back PanelsAll FG Back PanelsUL 94 V-0 RatedCarbon Steel (CS)Back PanelsCarbon SteelGrade 1010 HRS - Painted White EnamelBTEnd View (Flat)End View (Formed)BBBLBABKOMIT CENTER HOLES WHEN"BK" IS LESS THAN 29"ACCESSORIESHOLEDIA.OMIT CENTER HOLES WHEN"BL" IS LESS THAN 31.25"329<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Enclosure Specific Accessories - DS, F, CL, J, RJ, JCC & Control Series Back PanelsTypical Series Designators: DS, F, CL, J, RJ, JCC Back Panel DimensionsTypical Series Designators: DS, F, CL, J, RJ Back Panel DimensionsPART BA BB BK BL BT BT BT BT PANEL HOLE # OF Weight Weight Weight WeightNUMBER (AL) (FG) (SS) (CS) TYPE DIA. HOLES (Aluminum) (Fiberglass) (Stainless) (Carbon Steel)Suffix: AL Suffix: FG Suffix: SS Suffix: CSBP64 4.88 2.88 4.25 2.25 .080 .125 .060 .075 Flat .25 4 2 oz. 2 oz. 5 oz. 5 oz.(124) (73) (108) (57) (2) (3) (2) (2) (6)BP66 4.88 4.88 4.25 4.25 .080 .125 .060 .075 Flat .25 4 3 oz. 3 oz. 8 oz. 8 oz.(124) (124) (108) (108) (2) (3) (2) (2) (6)BP76 6 4.88 5.38 4.25 .080 .125 .060 .075 Flat .25 4 4 oz. n/a n/a 10 oz.(152) (124) (137) (108) (2) (3) (2) (2) (6)BP86 6.88 4.88 6.25 4.25 .080 .125 .060 .075 Flat .25 4 4 oz. 4 oz. 12 oz. 12 oz.(175) (124) (159) (108) (2) (3) (2) (2) (6)BP88 6.88 6.88 6.25 6.25 .080 .125 .060 .075 Flat .25 4 5 oz. 5 oz. 15 oz. 15 oz.(175) (175) (159) (159) (2) (3) (2) (2) (6)BP96 8.25 4.88 7.63 4.25 .080 .125 .060 .075 Flat .25 4 5 oz. n/a n/a 14 oz(210) (124) (194) (108) (2) (3) (2) (2) (6)BP108 8.88 6.88 8.25 6.25 .080 .125 .060 .075 Flat .25 4 8 oz. 8 oz. 19 oz. 21oz.(225) (175) (210) (159) (2) (3) (2) (2) (6)BP1210 10.88 8.88 10.25 8.25 .080 .125 .060 .075 Flat .25 4 12 oz. 14 oz. 30 oz. 33 oz.(276) (225) (260 (210) (2) (3) (2) (2) (6)BP1212 10.88 10.88 10.25 10.25 .080 .125 .060 .075 Flat .25 4 16 oz. 18 oz. 37 oz. 38 oz.(276) (276) (260 (260) (2) (3) (2) (2) (6)BP1407 12.88 5.88 12.25 5.25 .080 .125 .060 .075 Flat .25 4 14 oz. 14 oz. 32 oz. 34 oz.\(327) (149) (311) (133) (2) (3) (2) (2) (6)BP1412 12.88 10.88 12.25 10.25 .080 .125 .060 .075 Flat .25 4 18 oz. 20 oz. 45 oz. 48 oz.(327) (276) (311) (260 (2) (3) (2) (2) (6)BP1614 14.88 12.88 14.25 12.25 .080 .125 .060 .075 Flat .25 4 24 oz. 23 oz. 60 oz. 66 oz.(378) (327) (362) (311) (2) (3) (2) (2) (6)BP1816 16.88 14.88 16.25 14.250 .080 .125 .060 .075 Flat .25 4 31 oz. 32 oz. 88 oz. 87 oz.(429) (378) (413) (362) (2) (3) (2) (2) (6)BPJ2016 18.88 14.88 18.25 14.250 .080 .125 .060 .075 Flat .25 4 36 oz. 34 oz. 98 oz. 97 oz.(479) (378) (463) (362) (2) (3) (2) (2) (6)Control Disconnect SeriesTypical Series Designators: C AL FG SS CS(Carbon Steel: Panel Weight Weight Weight Weight Fits TypicalCS Thickness Panel Hole # of (Aluminum) (Fiberglass) (Stainless) (Steel) Enclosureavailable only) BA BB BK BL BT Type Dia. Holes (suffix: AL) (suffix: FG) (suffix: SS) (suffix: CS) SizeBP1610CD 13.00 8.50 12.00 7.50 0.08 Flat 0.31 4 n/a n/a n/a 3.3 lbs. 16 x 10(330) (216) (305) (191) (2) (8) DisconnectenclosureBP2016CD 16.88 13.38 15.25 11.25 0.13 Formed 0.31 4 n/a n/a n/a 7.3 lbs. 20 x 16(429) (340) (387) (286) (2) (8) DisconnectenclosureBP2412CD 20.88 9.38 19.25 7.25 0.13 Formed 0.50 4 n/a n/a n/a 6.5 lbs. 24 x 12(530) (238) (489) (184) (2) (13) DisconnectenclosureBP2424CD 20.88 21.38 19.25 19.25 0.13 Formed 0.50 4 n/a n/a n/a 14 lbs. 24 x 24(530) (543) (489) (489) (2) (13) DisconnectenclosureBP3024CD 26.88 21.38 25.25 19.25 0.13 Formed 0.50 4 n/a n/a n/a 19 lbs. 30 x 24(683) (543) (641) (489) (2) (13) DisconnectenclosureBP3630CD 32.88 27.38 31.25 25.25 0.13 Formed 0.50 5 n/a n/a n/a not listed 36 x 30(835) (695) (794) (641) (2) (13) DisconnectenclosureACCESSORIES<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com330
Enclosure Specific Accessories – Control Series Back PanelsBack Panels“N” SeriesBBBLBTEnd View (Flat)End View (Formed)BABKOMIT CENTER HOLES WHEN"BK" IS LESS THAN 29"HOLEDIA.N Series Back Panel DimensionsOMIT CENTER HOLES WHEN"BL" IS LESS THAN 31.25"ACCESSORIESN Series Back Panel DimensionsPART BA BB BK BL BT BT BT BT PANEL HOLE # OF Weight Weight Weight WeightNUMBER (AL) (FG) (SS) (CS) TYPE DIA. HOLES (Aluminum) (Fiberglass) (Stainless) (Carbon Steel)Suffix: AL Suffix: FG Suffix: SS Suffix: CSBP1610 13.00 8.50 12.00 7.50 .090 0.250 .060 .105 Flat 0.31 4 1 lb 1 lb 1.5 lbs 3.3 lbs(330) (216) (305) (191) (2) (6) (2) (3) (8)BP2016 17.00 13.00 15.25 11.25 .090 0.250 .060 .105 Flat .50 4 2 lbs 3.5 lbs 3.7 lbs 6.7 lbs(432) (330) (387) (286) (2) (6) (2) (3) (13)BP2020 17.00 17.00 15.25 15.25 .090 0.250 .060 .105 Flat .50 4 3.5 lbs 3.8 lbs 4 lbs 5.7 lbs(432) (432) (387) (387) (2) (6) (2) (3) (13)BP2412 21.00 9.00 19.25 7.25 .090 0.250 .060 .105 Flat .50 4 4.5 lbs 4.5 lbs 5 lbs 8.7 lbs(533) (229) (489) (184) (2) (6) (2) (3) (13)BP2420 21.00 17.00 19.25 15.25 .13 0.250 .060 .105 Flat .50 4 5 lbs 5.5 lbs 6 lbs 10.8 lbs(533) (432) (489) (387) (3) (6) (2) (3) (13)BP2424 21.00 21.00 19.25 19.25 .13 0.250 .060 .105 Flat .50 4 5.5 lbs 7 lbs 7.4 lbs 13.4 lbs(533) (533) (489) (489) (3) (6) (2) (3) (13)BP3020 27.00 17.00 25.25 15.25 .13 0.250 .060 .105 Flat .50 4 5.8 lbs 7.4 lbs 7.7 lbs 14 lbs(686) (432) (641) (387) (3) (6) (2) (3) (13)BP3024 27.00 21.00 25.25 19.25 .13 0.250 .060 .105 Flat .50 4 7 lbs 9.3 lbs 9.6 lbs 17 lbs(686) (533) (641) (489) (3) (6) (2) (3) (13)BP3630 33.00 27.00 31.25 25.25 .13 0.250 .060 .105 Flat .50 4 11 lbs 13 lbs 15.2 lbs 27 lbs(838) (686) (794) (641) (3) (6) (2) (3) (13)BP3636 31.00 33.00 29.00 31.00 .13 0.250 .060 .105 Formed .50 6 13 lbs 19 lbs 16 lbs 33 lbs(787) (838) (737) (787) (3) (6) (2) (3) (13)BP3648 31.00 22.00 29.00 20.00 .13 0.250 .060 .105 Flat .50 8 22 lbs 20 lbs 21 lbs 41 lbs(787) (559) (737) (508) (3) (6) (2) (3) (13)BP4836 45.00 33.00 43.25 31.25 .13 0.250 .060 .105 Formed .50 8 22 lbs 20 lbs 21 lbs 47 lbs(1143) (838) (1099) (794) (3) (6) (2) (3) (13)BP6036 57.00 33.00 55.25 31.25 .13 0.250 .105 .105 Formed .50 8 23 lbs 25 lbs 24 lbs 60 lbs(1448) (838) (1403) (794) (3) (6) (3) (3) (13)BP7225 64.00 21.00 62.00 19.00 .13 0.250 .105 .105 Formed .50 10 30 lbs 32 lbs 34 lbs 43 lbs(1626) (533) (1575) (483) (3) (6) (3) (3) (13)* BP7249 64.00 22.00 62.00 20.00 .13 0.250 .105 .105 Formed .50 10 38 lbs 40 lbs 44.8 lbs 91 lbs(1626) (559) (1575) (508) (3) (6) (3) (3) (13)* BP7260 64.00 27.50 62.00 25.50 .13 0.250 .105 .105 Formed .50 10 46 lbs 48 lbs 56 lbs 130 lbs(1626) (698) (1575) (648) (3) (6) (3) (3) (13)* Set of two panels.Caution:Metic units are for reference;do not convert.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com331
Enclosure Specific Accessories – Classic Series Dead Front PanelsThe most common method for mounting devices in an enclosure is the use ofa standard back panel. Demands of an application might require panels to bemade of mild steel, aluminum, fiberglass or stainless steel. Electrical codestypically do not discuss a specific type of material for internal panels.A dead front panel is designed to obscure the view of circuitry or deviceswhile offering a cosmetically pleasing mounting surface. In a designer's view,the dead front panel can represent the cover of the enclosure that will now restbeneath a clear hinged door. This emphasizes the importance of full clearwindow fronts and fully clear covers.This highly visible panel represents the function, utility and design cosmetics of an entire product. Strength andversatility of this assembly alone can determine the right choice for an enclosure.<strong>Stahlin</strong> produces a top quality design, inclusiveof spring-loaded releasable hinges that makecomponent mounting and panel assembly a verysimply task. When properly installed, the panel issecurely fixed to the sidewall of the enclosure.This means that load-bearing weights aredistributed throughout the assembly. The hingedsuspended panel swings out of the way to providefull access to a panel or PC board mounting.This concept makes the perfect facing foran expression of company colors and designswhile providing a secure mounting for allfunctional components.Classic Series Dead Front PanelsFactory Installed Modification OnlyDead Front PanelsClassic SeriesTypical Series Designators: CL / CLW - AL(Aluminum: Panel Weight Fits TypicalAL used on Thickness Panel (Aluminum) Enclosureall DF’s) BT Type (suffix: AL) SizeDF707 0.08 Flat 3 oz. 7x 7(2)DF907 0.08 Flat 4 oz. 9x 7(2)DF907HS 0.08 Flat 4 oz. 9x 7(2)DF1109 0.08 Flat 8 oz. 11x 9(2)DF1109HS 0.08 Flat 8 oz. 11x 9(2)DF1311 0.08 Flat 12 oz. 13x 11(2)DF1311HS 0.08 Flat 12 oz. 13x 11(2)DF1513 0.08 Flat 18 oz. 15x 13(2)DF1513HS 0.08 Flat 18 oz. 15x 13(2)ACCESSORIES<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com332
Enclosure Specific Accessories – Control Series & J Series Dead Front PanelsDead Front Panels“J” Series“J” Series Dead Front PanelsFactory Installed Modification OnlyTypical Series Designators: J / JW / RJ / RJW(Aluminum: Weight Fits TypicalAL used on Panel (Aluminum) Enclosureall DF’s) BT Type (suffix: AL) Size1008DF 0.08 Flat 8 oz. 10 x 8(2)1210DF 0.08 Flat 12 oz. 12 x 10(2)1412DF 0.08 Flat 18 oz. 14 x 12(2)1614DF 0.08 Flat 24 oz. 16 x 14(2)1816DF 0.08 Flat 40 oz. 18 x 16(2)J2016DF 0.09 Flat 39 oz. 20 x 16(2)Control Enclosure Series Dead Front PanelsFactory Installed Modification OnlyACCESSORIESTypical Series Designators: N(Aluminum: Weight Fits TypicalAL used on Panel (Aluminum) Enclosureall DF’s) BT Type (suffix: AL) Size2016DF 0.09 Flat 2.4 lbs. 20 x 16(2)2420DF 0.13 Flat 3.5 lbs. 24 x 20(3)2424DF 0.13 Flat 4.0 lbs. 24 x 24(3)3020DF 0.13 Flat 5.5 lbs. 30 x 20(3)3024DF 0.13 Flat 6.0 lbs. 30 x 24(3)3630DF 0.13 Flat 7.0 lbs. 36 x 30(3)333<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Enclosure Specific Accessories - Field Replacement of Standard LatchesJ Series - JLL150KITNLL150WTKITSSLKITControl / N Series NLL150KITField Replacement of Standard LatchesFIELD REPLACEMENT OF U<strong>SE</strong>D ON STYLE MAINTAINSSTANDARD LATCHES ENCLOSURE DESCRIPTION TYPE 4X RATINGJ RJ JLL150KIT J / RJ/CL Standard link lock latch used for "HLL" yesdesignationsN NLL150KIT N Series Standard link lock latch used on "N" yesseries Type 12, 3 and 4XN NLL150WTKIT N Series Standard link lock latch used on "N" yesseries type 4X top & bottomJ RJ SSLKIT J / RJ/CL Standard padlock latch used for "HPL" yesdesignationsACCESSORIESCL Series, SSLKIT, JLL150KITJ Series SSLKIT, JLL150KIT<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com334
Enclosure Specific Accessories – Field Replacement or ModificationsWKJLatchWKNKITC2LHASPKITSSDF010JJ Series OnlyField Repalcements or ModificationsFIELD REPLACEMENT U<strong>SE</strong>D ON STYLEOR MODIFICATION ENCLOSURE DESCRIPTIONJ WKJLATCH J Series only Operator mechanism for "J" series.Not for use with "RJ" seriesACCESSORIESN C WKNKIT N /C Series Operator mechanism for "N" and "C"series disconnectsJ DF010J J Series only Operator mechanism for "J" series.Not for use with "RJ" seriesJ C2L J Series only Operator mechanism for "J" series.N HASPKITSS N Series Stainless steel alternate hasp pin for "N"series enclosures335<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Enclosure Specific Accessories – Factory Modifications Only3PTKEYPADHANDLEKITFactory Installed Only ModRight ModificationsFACTORYU<strong>SE</strong>D ON STYLEMODIFICATION ONLY ENCLOSURE DESCRIPTIONN 3PTPADHANDLEKIT N Series 3 point padlockable door latchmechanism for "N" seriesN 3PTKEYHANDLEKIT N Series 3 point door latch mechanism for "N" seriesControl Enclosure Rain Shield <strong>Catalog</strong> NumbersA rain shield, an overhanging strip across the top of an enclosure designed to prevent incidental wateringress when a door is opened, is a typical feature of Type 3 construction and is an integral part of thatconfiguration. There are occasions when a Type 12 or 4X enclosure is required but a rain shield isadditionally desired. <strong>Stahlin</strong> offers a Rain Shield kit to be added to any enclosure where this extra protectionis needed or required.In addition to the shield, <strong>Stahlin</strong> provides an instruction sheet for its mounting. Kits are sized for the widthdimension of an enclosure and are available for eight of the common sized Control Series products.Control Enclosure Rain Shield <strong>Catalog</strong> Numbers<strong>Catalog</strong> #N2016RTKITN2412RTKITN2420RTKITN2424RTKITN3020RTKITN3024RTKITN3630RTKITN4836RTKITACCESSORIES<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com336
Enclosure Specific Accessories – Mounting FeetClassic Series Mounting FeetMounting FeetCLMTGFTKITClassic Series Mounting FeetClassic Series Mounting Feet DimensionsSIZE O P Q R707 8.46 5.71 5.71 8.46907 10.46 5.71 7.71 8.461109 12.46 7.71 9.71 10.461311 14.46 9.71 11.71 12.461513 16.46 11.71 13.71 14.46CF Series Mounting FeetACCESSORIES*Flat Cover+Factory Installed OnlyCF Series External MountingPARTNUMBER W X Y Z+*CF332 4.42 5.24 2.19 3.08(112) (133) (56) (78)+ CF532 6.67 7.49 2.19 3.27(169) (190) (56) (83)CF644 7.30 8.12 2.19 4.02(185) (206) (56) (102)+ CF832 9.11 9.93 2.19 3.27(231) (252) (56) (83)CF844 9.55 10.37 2.19 4.02(242) (263) (56) (102)+ CF932 10.04 10.87 2.19 3.27(255) (276) (56) (83)CF1144 11.80 12.62 2.19 4.02(<strong>300</strong>) (321) (56) (102)+ CF1432 14.48 15.30 2.19 3.27(368) (389) (56) (83)+ CF1732 18.04 18.87 2.19 3.27(458) (479) (56) (83)*F763 8.19 9.01 2.19 3.32(208) (229) (56) (84)*F963 10.44 11.26 2.19 3.32(265) (286) (56) (84)337<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Accessories – Pluggit!continued on following pages• Superior corrosion resistance compared to rust-prone carbon steel and othermetallic alternatives helps ensure increased enclosure life expectancy.• Cost effective when compared to either carbon or stainless steelalternatives.• Considerably better long-term resistance to UV degradation versus UVsusceptiblesoft rubber plugs that turn brittle from extreme temperaturevariations and repeated UV exposure.• Will not create galvanic corrosion associated with dissimilar metalssometimes used in electrical enclosures.• Maintains all chemical resistance features of current <strong>Stahlin</strong> products.• Flame retardant material to UL 94V-0.• A submersion/hosedown rated component for use in electrical enclosures ULrecognized to type 4x and 6P.• IEC tested to IP66 and IP68.STAHLIN FIBERGLASS HOLE PLUG AS<strong>SE</strong>MBLY...a new, reliable, cost-effective optionfor maintaining enclosure integrity.The importance of <strong>Stahlin</strong>’s Fiberglass Hole PlugElectrical enclosures that have extra holes in them either from incorrectdrilling or intentional drilling of extra holes for later use require recognizedcomponent hole plugs to maintain original enclosure integrity by sealingagainst entry of dust, water and other potentially destructive elements.<strong>Stahlin</strong>’s new Fiberglass Hole Plug provides an ideal combination of highquality protection in corrosive and outdoor environments…costeffectiveness…and proven resistance to UV degradation.This hole plug assembly is available in 5 basic kits to seal cutouts from1/2" to 2-9/16" diameters.ACCESSORIES<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com338
An environmentally sealed enclosure is an ideal housing forterminations and wire junctions. <strong>Stahlin</strong> offers a pre-fabricatedterminal kit for use with all "J" series configurations.Terminal Kitsinclude pre-cut DIN rail and mounted terminal blocks, premountedin the enclosure upon request, or shipped separately asdesired. A finished assembly can quickly be installed and wiredright out of the carton. This versatile system also allows forvariations once the product has been received. Please seenotations below.Refer to the ModRight Modification section for other assistanceincluding pre-drilled conduit openings on the enclosure.DIN Rail Terminal Block Assemblies are ideal for variousapplications such as machine tool controls, electrical distribution,instrumentation, and panelboard construction.DIN Rail shown mounted to frameTerminal KitsDIN Rail shown mounted to back panelInsulating materials: The moldings are made of Polyamide 6.6. This material has high creep resistance, and high impact strength. Itcarries a UL 94V-0 flammability rating and is resistant to gas, oil, alcohol, and many other corrosive agents.Connector System: The connectors are of copper alloy and are nickel plated for corrosion resistance. The screws are rolled steel,zinc plated and chromated. The following benefits are provided by this connector system:1.) The system ensures that regardless of the cross section of the wire it can only be inserted into the connection hole.2.) A serrated pressure plate eliminates any wire damage from the torquing of the screw.3.) The upward pressure on the screw from the pressure plate reduces the risk of the screw loosening from vibration.Assembly of DIN Rail Terminal Blocks: By pushing blocks onto the rails or by snapping blocks onto the rails. Terminal blocks canbe easily changed by separating the neighboring blocks on both sides then using a screwdriver to apply outward pressure on therelease foot.Ground Terminal BlockGround terminal blocks come with a green -yellow insulating body for easy identification. The ground block can be mounted on theDIN rail in any position between other blocks. The DIN rail then serves as as a grounding rail. There are two methods to secure theground block to the rail:1.) The middle screw is tightened to close the catch to the rail.2.) By securing a wire to either side also applies pressure to the rail.ACCESSORIESTechnical SpecificationsDIN RailSymmetrical 35mm x 7.5mm Slotted.Steel zinc plated, yellow chromated.Terminal Block Thickness: 6mm Overall Height, Width, ThicknessWire Range: 22-10 AWG H = 38mm (1.496")Color: Gray W = 42mm (1.653")Material: Polyamide 6.6 T = 6mm (.236")Approvals: UL File E62806 600V, 30ACSA File LR700930 600V, 40AInsulating End For covering and insulating the last Section terminal in an assembly.End BracketUsed on the ends of the assembly to hold terminal blocks in place.Ground Terminal Thickness: 7mm Overall Height, Width, ThicknessBlock Wire Range: 22-10 AWG H = 38mm (1.496")Color: Green/Yellow W = 56mm (2.204")Material: Polyamide 6.6 T = 7mm (.275")Approvals: UL File E62806CSA File LR700930Mounting FrameChannelChannel nutwith springScrews andWasherMaterial: 19 ga. Low carbon steel.Finish: ElectrogalvanizedMaterial: Mild steelFinish: Electrogalvanized<strong>300</strong> Series Stainless Steel.339<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Terminal KitsTerminalBlockAssemblyDIN RailMountingFrameTerminal Block Assemblies can bemounted in an enclosure eitherusing our standard mounting frameor directly to a <strong>Stahlin</strong> Back Panel.Terminal Block AssemblyTerminal Kits - Use With Any J Series <strong>Enclosures</strong>STAHLIN P/NNO. OFTERMINALS/RAILNO. OF GROUNDTERMINALS END CAPINSULATEDEND CAPFITS ENCLOSURESIZESTK806 9 1 1 1 J806 / CL907TK1008 12 1 1 1 J1008 / CL1109TK1210 18 1 1 1 J1210 / CL1311TK1412 21 1 1 1 J1412 / CL1513TK1614 24 1 1 1 J1614Includes DIN rail, terminal block, end pieces and ground terminal.<strong>Stahlin</strong> DIN RailPARTNUMBER A BDIN35-180 7.05 6.24DIN35-230 9.03 8.21DIN35-280 11.00 10.18DIN35-330 12.97 12.15DIN35-380 14.94 14.12<strong>Stahlin</strong> Label PackagePARTNO.TK4000Labels unprintedPkg=10 strips of 10 labelsDIN Rail/Terminal Block Assy. Mtg. FramePARTNO.FR806FR1008FR1210FR1412FR1614FITS ENCLOSURESIZESJ806 / CL907J1008 / CL1109J1210 / CL1311J1412 / CL1513J1614ACCESSORIE<strong>SE</strong>ach kit includes (2) mounting rails,(4) channel nuts with springs,and (4) #10-32 screws w/washers.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com340
Technical InformationEnclosure Selection Sheet InstructionsTechnicalInformationTECHNICALINFORMATIONThe Enclosure Selection Sheet is designed to enhanceenclosure selection by making the process easier, moreconsistent, accurate and complete. The goal is to assurethat factors affecting enclosure selection are considered andthe enclosure specification is complete and accurate.Appropriate technical guidance is referenced to help withthe selection process and selectable items are shown inbold type.ENCLOSURE SIZEMost Important FactorsInternal Equipment DimensionsExternal Space RestrictionsAdditional Factors to ConsiderService ConnectionsMounting and AccessClimate Control RequirementsMaintenanceFuture ExpansionEconomicsThese considerations establish:Overall HeightOverall WidthOverall DepthInside HeightInside WidthInside DepthInside height, width, and depth are determined by theinternal equipment dimensions; the overall height, width anddepth are established by the external space restrictions andmay be influenced by additional factors such as mountingaccess and climate control requirements. The Dimensionsare found in the drawings and tables for the respectiveenclosures.ENCLOSURE RATINGFactorsArea Classification:Location Environment:Internal EquipmentHazardous or <strong>Non</strong>-HazardousIndoor; Outdoor; Degree ofProtection against Dirt, Dust,Rain, Snow, Ice, SplashingWater, Hose-Directed Water,Corrosion, Submersion andOil/Coolant.Electrical and/or Mechanical,SecurityRatings offered by <strong>Stahlin</strong> include Type 1, 3, 3R, 4, 4X, 6,6P, 12, and 13. Information on area classifications and thedegree of protection provided by the NEMA ratings isprovided in the General Information Section of thispublication.ENCLOSURE MATERIALA harsh or benign location, washdown conditions, andmaterial physical properties must be considered in selectingthe enclosure materials. Even though the enclosurematerial is fiberglass and very corrosion resistant, thematerial for accessory items such as hinges, latches,gaskets, etc., must be considered in material selection.COVER FASTENINGThe internal security and safety needs must be evaluatedduring the selection process. Hinge selections includecontinuous hinge or fiberglass pin and sleeve hinge.Fastening system options include a padlock hasp, linklocklatch and several series-specific latches including: keylock,tamperproof lock (three point key lock, three point padlock),wing knob and screw cover. These items are picturedamong the accessory items on pages 335 and 336.FEATURESOther optional features that should be considered include:• Color• Surface Finish• Vents• Louvers• Cable/Conduit Connectors• Door Stop• Drip Shield• EMI/RFI Shielding• Back Panels• Dead Front Panel• Viewing Window• Wiring Connections• Enclosure Mounting• Special Modifications341<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Enclosure Selection Work SheetCommercial InformationClient_____________________________________Date______________________________________Delivery Date_______________________________Specifier____________________________________Quantity Required____________________________Shipping Information____________________________________________________________________________________________________________________________________________________________________________Technical InformationEnclosure Size:DIMENSION LOCATIONOverall HeightOverall WidthOverall DepthInside HeightInside WidthInside DepthDIMENSION MAGNITUDE - INCHE<strong>SE</strong>nclosure RatingTypical Rating is 4XSee individual productsfor designated ratings■ Type 1 ■ Type 4 ■ Type 6P■ Type 3 ■ Type 4X ■ Type 12■ Type 3R ■ Type 6 ■ Type 13■ Other requirements:Back Panel Material: ■ Aluminum ■ Fiberglass■ Carbon Steel ■ Stainless Steel ■ OtherCover Hinging: ■ Continuous stainless steel hinge ■ Fiberglass lift off hingeCover Fastening: ■ Link lock latch Available on most series “LL” suffix■ Padlock latch Available on most series “PL” suffix■ Key lock Available on J/JW series only Custom request■ Tamper proof lock Available on J/JW series only Custom request■ Wing knob Available on CL/CLW series only “HL” suffix■ Screw cover Available on most series “W” suffixTECHNICALINFORMATION<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com342
Technical InformationEnclosure Selection Work SheetTechnicalInformationSpecialCover Fastening: ■ 3-point pad lock latch Available on N series products Custom request■ 3-point key lock latch Available on N series products Custom requestCustom Aesthetics: ■ Custom Color Available on most series Custom request■ Surface finish Available on most series Custom requestCable/conduit entry For typical use with: Designation:■ PVC Hub PVC conduit “H” series■ Nylon cord grip Entrance cord “5000” series■ Sigma form feed Entrance cord “CES” seriesthrough seal■ Aluminum hubs Rigid metal conduit “M” series■ PVC coated hubs PVC coated conduit “PRSTG” seriesOther Modifications■ Louvers & Vents■ SS door brace■ Grounding lug■ EMI/RFI shielding■ Silk screeningAvailable on most seriesAvailable on “N” seriesAvailable on most seriesAvailable on most seriesAvailable on most seriesEnclosure Mounting: ■ Wall mount Typical to most enclosures Flange or add on feet■ Pedestal mount■ Free standing■ Pole mountingAvailable for most small toMedium range enclosuresDesignated ControlTower seriesAvailable for most small toMedium range enclosuresTECHNICALINFORMATION<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com343
Enclosure Materials<strong>Stahlin</strong> produces fiberglass and PVC enclosures but alsooffers a variety of materials for use as back panels, including:Aluminum, Fiberglass, Stainless Steel and PaintedCarbon Steel products. The choice of material is dependenton the concentration of various corrosives present in theapplication environment and other physical propertiesnecessary to meet the design specifications. Althoughfiberglass NEMA 4X is specifically fabricated and rated forresistance to corrosive agents, other enclosure materialsoffer a degree of corrosion resistance in less harshenvironments.To begin the selection process, one must consider thegeneral atmosphere as well as the corrosive agents whichcan be present in an application. Defining the corrodingagents and determining the concentration can be a complexprocess. Usually several corrosive elements are present andinteractions are not always well documented.Water (and water states such as ice, snow, mist, fog, vapor)is the most common corrosive and is usually present to someextent in every enclosure application. Adjacent processingoperations or other intermittent activities such as cropdusting, industrial cleaning or road salt may expose theenclosure to a variety of corrosive agents and temperatures.Each environment is unique and all possible corrosive agentsshould be identified for the intended enclosure application.Once the corrosive agents and concentrations are identified,information in this section can be used to select theenclosure material. Metal corrosion is influenced by surfacefinish, surface treatment such as painting or galvanizing anduse of materials such as stainless steel or aluminum whichare naturally corrosion resistant. Fiberglass enclosurematerials are resistant to heat and sunlight in addition tomany chemicals and solvents.To select the best enclosure material for an application;chemical resistance, physical strength and economic data arepresented in several tables beginning on the next page. InTable 1 enclosure materials are rated on a continuum from“Recommended” to “Limited or Unacceptable” in three broadcategories of chemicals. Since the chemical resistancecategories in the table are extremely broad, some materialsmay perform well in specific corrosive environments within ageneral category and it is best to consult the detailedChemical Resistance Information provided in Table 3.Besides the enclosure material, the corrosion resistance ofwindows, gaskets, latches, etc. must also be considered.Table 3 provides corrosion resistance information that can beused to select the commonly used materials for thesefeatures.Much of the chemical resistance information in Table 3 isbased on total immersion testing in the chemical for aminimum of 30 days at 72°F. Some fiberglass testspecimens were evaluated using procedures outlined inASTM D 543, Test Method for Resistance of Plastics toChemical Reagents. The information in these tables isintended as a guide only. Total immersion testing isconsidered quite severe and the results may notnecessarily reflect the performance under actual fieldconditions. The user assumes responsibility for selection ofthe material based on the characteristics of the applicationenvironment.TECHNICALINFORMATION<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com344
Technical InformationEnclosure MaterialsTechnicalInformationTABLE 1. BROAD CATEGORIES OF ENCLOSURE MATERIAL CHEMICAL RESISTANCECONTINUUMGENERAL CATEGORY OF CHEMICALSOF U<strong>SE</strong> Acids Alkalines SolventsStainless SteelStainless Steel Stainless Steel FiberglassRecommended Fiberglass AluminumFiberglassPowder Coated Steel➡➡ ➡➡ ➡➡ ➡➡AcceptableLimited orUnacceptablePowder Coated SteelAluminumGalvanized SteelGalvanized SteelPowder Coated SteelAluminumGalvanized SteelDetailed material strength information is beyond the scope of this catalog and should be obtained from a materials reference or<strong>Stahlin</strong> <strong>Enclosures</strong>; however, Table 2 provides some relative data to help with this selection.TECHNICALINFORMATIONTABLE 2. RELATIVE MATERIAL STRENGTH AND COSTCOMPARISON OF COMMONLY U<strong>SE</strong>D ENCLOSURE MATERIALSRELATIVEMATERIAL PHYSICAL RELATIVE APPLICATION TEMPERATURESTRENGTH COST CONDITIONS LIMITATIONSAluminum Average Average Indoor and Outdoor, Marine, Solvents, Petrochemical <strong>Non</strong>e for enclosure applicationsSulfates, Nitrates and Specific Acids.Fiberglass Average Low- Indoor and Outdoor for continuously damp and highly -40°F(C) to 250°F(121°C)Average corrosive environments. Petrochem, Water Treatment,Food Processing , Coating, Salts and Chemicals.Mild Steel: High Average Indoor and Outdoor where the respective coating <strong>Non</strong>e for enclosure applications.Galvanized Low provides acceptable protection in a mildly corrosivePaintedenvironment.Stainless High Average- Indoor and Outdoor in highly corrosive applications. <strong>Non</strong>e for enclosure applications.Steel High Food and Dairy Processing or Marine.Acrylic Average Low Enclosure Windows. Weatherable, Scratch Resistant. -31°F(-35°C) to 180°F(82°C)Good resistance to Solvents.Poly- Average Low- Enclosure Windows. Not recommended for direct -31°F(-35°C) to 248°F(120°C)carbonate Average sunlight, exposure to organic solvents andconcentrated alkalis.Nylon Average Low Cord Grip, Hinges, Latches. -22°F(-30°C) to 212°F(100°C)Gaskets:Neoprene Low Low Oil Resistance. Seams may be a problem -40°F(C) to 225°F(107°C)Silicone Low Average Oil Resistance Temperature & Chemical Resistance. -40°F(-40°C) to 350°F(175°C)Urethane Low Average Water and Oil Resistance, Chemical Resistance. -40°F(C) to 200°F(93°C)345<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Chemical ResistanceKEY:S = Superior Resistance/Completely Unaffected under all ConditionsL = Limited Resistance, Some Chemical Attack May Occur Over TimeM = Moderate Resistance, Superficial Effects only, Testing RecommendedU = Unsatisfactory, Severe/Chemical Attack in a relatively short time– = No Data AvailableTABLE 3. CHEMICAL RESISTANCE OF FIBERGLASS MATERIALS AND ENCLOSURE ACCESSORIESFiber Steel Stainless SteelGlass Polyester Urethane Gal- Type TypeCHEMICAL Aluminum Polyester Powder Enamel vanized 304 316Acetyldehyde S U — — — S SAcetic Acid (10%) L S U U U S UAcetone S L L U L S SAluminum Chloride (10%) U S U U U U MAluminum Sulfate (10%) L S U U U U SAmmonia Gas L S — — — S SAmmonium Chloride U S U U U S SAmmonium Hydroxide (10%) S L U U U S SAmmonium Nitrate (10%) M S U U U S SAmmonium Phosphate (10%) L M S L U S MAmmonium Sulfate S S — — — S SAniline L U — — — S SASTM #1 Oil S S S S S S SASTM #3 Oil S S S S S S SAxle Grease S S S S S S SBenzene S S — — S S SBoric Acid (10%) M S U U U S SBromine U L U U U U UButyl Acetate M L — — — S SButyric Acid U S — — — S SCalcium Chloride (10%) L S U U U L SCalcium Hydroxide (10%) U S U U U S STECHNICALINFORMATION<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com346
Technical InformationChemical ResistanceTechnicalInformationTECHNICALINFORMATIONTABLE 3. ContinuedFiber Steel Stainless SteelGlass Polyester Urethane Gal- Type TypeCHEMICAL Aluminum Polyester Powder Enamel vanized 304 316Calcium Hypochlorite (10%) L M U U U U MCalcium Sulfate M S U U U S SCarbolic Acid (25%) M L U U U S SCarbon Disulfide S L — — — S SCarbon Tetrachloride S M U S S U SChlorine (dry) S S — — — S SChlorine (water) 5-10 ppm M L S U U U —Chlorobenzene S S — — S S SChloroform L U — — — S SChrome Plating Solution U L U U U L LChromic Acid S S — — — U UCitric Acid (10%) U M U U U S SCopper Sulfate U S — — — S SCreosote L L — — — S SCutting Fluid (5 Star) 10% S S U U U S SCutting Fluid (Castrol 980 H) S S S U U S SCutting Fluid (Norton 205) U S U U U S SCutting Fluid (Rustlick) 10% M S U U U S SCutting Oil (Dark) S S S S S S SDiethyl Ether S S — — — S <strong>SE</strong>thyl Alcohol S S M U S S <strong>SE</strong>thylene Dichloride S L — — — — —Ethylene Glycol S S S S U S SFerric Chloride U S U U U S UFerric Nitrate — S — — — S SFerric Sulfate M S — — — S SFluorine S U — — — M —Formaldehyde S S — — — L SFormic Acid U S U U U M SFuel Oil (#2) S S M S S S MGasoline S M — — — S SGlycerine S S — — S S SHydraulic Brake Fluid S S U U S S SHydraulic Oil S S S S S S S347<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Chemical ResistanceTABLE 3. ContinuedFiber Steel Stainless SteelGlass Polyester Urethane Gal- Type TypeCHEMICAL Aluminum Polyester Powder Enamel vanized 304 316Hydrochloric Acid (10%) U M U U U U UHydrocyanic Acid S U — — — S SHydrofluoric Acid (20%) U U U U U U UHydrogen Peroxide S M — — — L SHydrogen Sulfide M S — — — L SHypochlorus Acid U S — — — — —Isopropyl Alcohol S S M U S S SKerosene S S S S S S SLacquer Thinner S S L U S S SLactic Acid M S — — — L SLime M M — — — — —Liquid Dish Soap (10%) M S U U U S MLubricating Oils S S — — — S SMagnesium Chloride (10%) L S U U U S SMagnesium Hydroxide (10%) L S U U U S SMercuric Chloride (10%) U M U U U S UMethyl Ethyl Ketone S L — — — S SMethylene Chloride S S U U M S SMilk S S — — — S SMineral Oil S S — — — S SMineral Spirits S S S S S S SMotor Oil (10 weight) S S S S S S SNickel Salts L S — — — L SNitric Acid (10%) U M U U U S SNitrobenzene S L — — — S SOleic Acid S S — — — L SPerchlorethylene S S S U S S SPhosphoric Acid (25%) U L U U U S SPhosphoric Acid (50%) U U U U U S SPickling Solution U M U U U S MPotassium Carbonate (10%) U S S S L S SPotassium Chloride (25%) L S U U U S SPotassium Hydroxide (25%) U U U U U M MPotassium Nitrate (10%) U S U U U S STECHNICALINFORMATION<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com348
Technical InformationChemical ResistanceTechnicalInformationTABLE 3. ContinuedFiber Steel Stainless SteelGlass Polyester Urethane Gal- Type TypeCHEMICAL Aluminum Polyester Powder Enamel vanized 304 316Potassium Sulfate (10%) L S U U U S SSoap (Igepal) 10% L S S U U S SSodium Bicarbonate (10%) L S S S U S SSodium Bisulfate (10%) U L U U U S SSodium Chloride (25%) L S U U U S SSodium Hydroxide U U U U U M MSodium Hypochlorite U M U U U S MSodium Nitrate (10%) M S U U U S SSodium Phosphate (10%) L S U U U S SSulfuric Acid (25%) U S U U U S SSulfurus Acid (10%) U U U U U S STannic Acid ((10%) L S U U U M MTetrahydrofuran M L U U U S SToluene S S L U S S STrichloroethylene S U — — — L STrisodium Phosphate L M — — — — —Turpentine S M M U L S SVegetable Oils S S — — — S SVinegar M S — — — S SWater, Industrial L S L L L S SWater, Rain L S S L L S SWater, Sea L S U U U S SWater, Tap L S S L L S SXylene S S L U S S SZinc Acetate S S — — — S SZinc Chloride L S S U U M SZinc Sulfate S S — — — M SSources: Robroy Industries Reagent Testing Lab, Corrosion Resistant Materials Handbook, 4th Edition, Noyes Data Corp., Raw Material VendorsTECHNICALINFORMATION349<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Chemical ResistanceTABLE 4. SPECIFIC CHEMICAL RESISTANCE INFORMATIONOTHER MATERIALS U<strong>SE</strong>D FOR ENCLOSURE FEATURESGasketsWindowsRigid Glass Neoprene Silicone Poly-CHEMICAL PVC Nylon Rubber Rubber Urethane Acrylic carbonateAcetyldehyde U — S S — — —Acetic Acid (10%) L U U M L S SAcetone U S U S U U UAluminum Chloride (10%) S U S S S S SAluminum Sulfate (10%) S L U S S S SAmmonia Gas — S S S — S —Ammonium Chloride S U S S S S SAmmonium Hydroxide (10%) S — L L S S UAmmonium Nitrate (10%) S U U S S S UAmmonium Phosphate (10%) — L U S S S SAmmonium Sulfate S U S S — — —Aniline S L U U — S —ASTM #1 Oil — — M S S S MASTM #3 Oil — — U L S S MAxle Grease — — L S S S MBenzene U S U U — U —Boric Acid (10%) L S S S S S SBromine U U U U U L UButyl Acetate U S U U — U —Butyric Acid U U U — — — —Calcium Chloride (10%) S U S S S S SCalcium Hydroxide (10%) S — U S L S SCalcium Hypochlorite (10%) S U U S U M SCalcium Sulfate S U S S S S SCarbolic Acid (25%) — — U U U U UCarbon Disulfide U — U — — S —Carbon Tetrachloride L S U U U S UChlorine (dry) L — — — — — —Chlorine (water) 5-10 ppm L — L S S S SChlorobenzene U S U U — L —Chloroform U U U U — U —Chrome Plating Solution — — U U U S SChromic Acid L U U M — U —Citric Acid (10%) S L U S U S STECHNICALINFORMATION<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com350
Technical InformationChemical ResistanceTechnicalInformationTABLE 4. ContinuedTECHNICALINFORMATIONGasketsWindowsRigid Glass Neoprene Silicone Poly-CHEMICAL PVC Nylon Rubber Rubber Urethane Acrylic carbonateCopper Sulfate S L S S — U —Creosote — U U U — — —Cutting Fluid (5 Star) 10% — — U S S S MCutting Fluid (Castrol 980 H) — — L S S S LCutting Fluid (Norton 205) — — S S S S SCutting Fluid (Rustlick) 10% — — S S S S SCutting Oil (Dark) — — U S S S SDiethyl Ether U — — U — U —Ethyl Alcohol S — L S S U MEthylene Dichloride U — U U — U —Ethylene Glycol S — S S S S SFerric Chloride S U L S L S SFerric Nitrate S U S M — — —Ferric Sulfate S U S M — — —Fluorine L — — U — — —Formaldehyde L U U M — S —Formic Acid L S U L L U SFuel Oil (#2) S — U U U S SGasoline S S U L — S —Glycerine S S S S — S —Hydraulic Brake Fluid — — U S U U UHydraulic Oil — — U S S S MHydrochloric Acid (10%) S U L L U S SHydrocyanic Acid S — S M M — —Hydrofluoric Acid (20%) L U U U — S MHydrogen Peroxide S U U M — S —Hydrogen Sulfide S — U M — — —Hypochlorus Acid — — — — — — —Isopropyl Alcohol — — S S S S SKerosene S — U U S S MLacquer Thinner — S U S L U ULactic Acid S L L — — L —351<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Chemical ResistanceTABLE 4. ContinuedGasketsWindowsRigid Glass Neoprene Silicone Poly-CHEMICAL PVC Nylon Rubber Rubber Urethane Acrylic carbonateLime — — S M — — —Liquid Dish Soap (10%) S — L S S S SLubricating Oils — — U U — S —Magnesium Chloride (10%) S S S S S S SMagnesium Hydroxide (10%) S — S S S S SMercuric Chloride (10%) L — U L U S SMethyl Ethyl Ketone U S S U — L —Methylene Chloride — U U S U U UMilk S — S S — S —Mineral Oil S — L M — S —Mineral Spirits — — U U S S MMotor Oil (10 weight) — — U U S S SNickel Salts S — U S — — —Nitric Acid (10%) S U U U U S LNitrobenzene U S U — — — —Oleic Acid S U — U — — —Perchlorethylene — — U S U U UPhosphoric Acid (25%) S U S S U S SPhosphoric Acid (50%) S U S S U S SPickling Solution — — L M M S SPotassium Carbonate (10%) L S S S S S SPotassium Chloride (25%) S L S S S S SPotassium Hydroxide (25%) S S U L M U UPotassium Nitrate (10%) S L S S S S SPotassium Sulfate (10%) SL S S S S S SSoap (Igepal) 10% S — U S S S SSodium Bicarbonate (10%) S S S S S S SSodium Bisulfate (10%) S L S S L S SSodium Chloride (25%) S S S S S S SSodium Hydroxide S S U U M S USodium Hypochlorite S U U S U S SSodium Nitrate (10%) S S S S S S STECHNICALINFORMATION<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com352
Technical InformationChemical ResistanceTechnicalInformationTABLE 4. ContinuedGasketsWindowsRigid Glass Neoprene Silicone Poly-CHEMICAL PVC Nylon Rubber Rubber Urethane Acrylic carbonateSodium Phosphate (10%) S — U S S S SSulfuric Acid (25%) S U S S U S SSulfurus Acid (10%) S — U U L S STannic Acid ((10%) S U U L U S STetrahydrofuran — S U U U U UToluene U S U U U U UTrichloroethylene U U U U — U —Trisodium Phosphate S — — — — — —Turpentine — S U L U S SVegetable Oils S — L S — S —Vinegar — S L S — S —Water, Industrial S — S S S S SWater, Rain S — S S S S SWater, Sea S — S S S S SWater, Tap S — S S S S SXylene — S U M U S UZinc Acetate — — — U — — —Zinc Chloride S U M S U S MZinc Sulfate S L S S — — —Sources: Robroy Industries Reagent Testing Lab, Corrosion Resistant Materials Handbook, 4th Edition, Noyes Data Corp., Raw Material VendorsTECHNICALINFORMATION353<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
<strong>Non</strong>-<strong>Metallic</strong> PropertiesSPECIFICATION: PHYSICAL PROPERTIESOF NON-METALLIC MATERIALSTable 7 provides technical data for assistance in evaluatingnon-metallic enclosures and selecting the materials used with<strong>Stahlin</strong> enclosures accessories. Additional considerations forinclusion in the fiberglass enclosure specification are:• The resin system shall be pigmented gray unless otherwisespecified.• The resin system shall include a flame retardant to obtain aflammability rating which meets UL 94-5V• The heat distortion temperature shall be at least 350°F.• Standard cover screws shall be stainless steel or stainlesssteel with fiberglass encapsulated heads. Other hardwareitems such as hinges and latches shall be stainless steel orfiberglass construction.• Back panels shall be fabricated of high quality, marinegrade aluminum. Back panels are also available in paintedcarbon steel, stainless steel and fiberglass. <strong>Enclosures</strong> willbe provided with back panel mounting provisions wherepossible.• External mounting feet shall be molded or securely attachedto the enclosures to provide a corrosion resistant surfacemounting system.TABLE 7. PHYSICAL PROPERTIES OF NON-METALLIC MATERIALSMaterials Typical Test Polyester Polyester Polyester Acrylic Dispensed Foamed Extruded Neoprene ClearProperties Method Fiberglass Fiberglass Fiberglass Sheet for Silicone Urethane Silicone Gaskets Poly-ASTM (SMC) Hand Lay-up Pultrusion Windows Gaskets Gaskets Gaskets carbonateFlexural Strength (psi) D 790 17K 30K 45K 16K N/A N/A N/A N/A 13KNotched Izod D 256 7-22 5-30 25 0.3-0.4 N/A N/A N/A N/A 15(ft - lb/in @ 1/8")Impact Resistance (lb-in) UL 746C ≥216 — — — N/A N/A N/A N/A ––Compressive Strength (psi) D 695 20K 35K 26K 18K N/A N/A N/A N/A ––Tensile Strength (psi) D 638 8K 17.5K 40K 10.5K 200 60 100 50 9KSpecific Gravity D 792 1.71 1.5-2.1 1.7 1.17-1.20 1.32 0.3 0.55 1.24 1.20Flammability UL 94 V-0 & V-5 — V-0 — — — — — H.B.Heat Deflection D 648 375-500 >400
Technical Information<strong>Non</strong>-<strong>Metallic</strong> PropertiesTechnicalInformationEnclosure Load CapacityLarge control enclosures can support 200 lbs. of equipmenton the back panel. Smaller-junction and Classic Seriesenclosures should be limited to 75 lbs. Listed valuesassume the enclosure is vertically mounted against areasonably flat surface and are based on a minimumsafety factor of two.Maximum Temperature RatingThe deflection temperature* of polyester fiberglass rangesfrom 375-500°F. <strong>Stahlin</strong> <strong>Enclosures</strong> has conducted tests onenclosures at sustained temperatures of 350°F. Polyesterfiberglass is a high temperature material compared to otherpolymers such as PVC, polycarbonate or engineeredthermoplastics.In elevated temperature applications, the highesttemperature an enclosure can withstand depends on othercomponents used in the finished product. Such items asPVC air vents, and special gaskets must be consideredwhen establishing a temperature limit for both fiberglass andmetal enclosures. Many times this issue is neglected orminimized when rating the product. Refer to the MaterialProperties section of this manual for more details.*Deflection temperature: The temperature when a material will deflect (distort)under a flexural load of 264 psi. See ASTM D 648.STAHLIN FIBERGLASS ENCLOSUREIMPACT TESTSunlight (UV) ResistanceIn time sunlight may roughen the fiberglass enclosuresurface, but its electrical and mechanical properties remainunaffected. Surface roughening caused by UV exposure isa common phenomenon encountered with virtually allfiberglass products, but it only affects surface appearance.Tests have confirmed the effect on polyester fiberglass isonly 40 to 80 microns (0.0015"-.003") in depth. Ifappearance is a concern, an outdoor acrylic paint (clear orpigmented) will provide protection for many years. Mostacrylic paints in ordinary spray cans work well.SolarGurardSolarGuard is a unique SMC system for all molded<strong>Stahlin</strong> products which can provide up to 60% more UVresistance.Drilling, Sawing, Cutting and PunchingInstallers find fiberglass easy to cut or drill. Ordinary drills,hacksaws, hole saws and punches cut through fiberglasswith little effort. In large installations requiring many holes,glass abrasion may cause tools to become dull over time.Carbide tip tools work best for such applications. Formaximum accuracy, routing of openings is recommended.Impact Resistance<strong>Stahlin</strong> fiberglass enclosures are quite resistant to damagecaused by falling tools or flying debris. When tested inaccordance with UL Standard 746C, Section 24, thesefiberglass enclosures withstood an impact in excess of 216pound-inches. The test was performed by dropping a 2"diameter solid steel ball on various areas of the enclosurefrom a height of 15 ft. The impact force from such a test iscomparable to dropping a large wrench from 3 or 4 ft. Thedurability results from randomly oriented glass reinforcingfibers incorporated in all designs.TECHNICALINFORMATIONIntegrity of the enclosure was not compromised355<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Enclosure SecurityVarious hinge and latch combinations are available to securethe contents of an enclosure. Although the securityrequirements will be unique for each application, theselection process should include at least the followingconsiderations:• Safety:<strong>Enclosures</strong> may contain the controls orelements of a control system which arecrucial to the safety of many people. Controlenclosures in large chemical plants, electricalgenerating facilities, airports, mass transitsystems or hospitals can house equipmentcritical to the well being of numerousindividuals. In these and many otherapplications, rigorous security requirementsare designed to protect the public andprevent unauthorized or accidental operationof control equipment.• Monetary In some applications the monetary value ofLoss: the equipment in an enclosure may besufficient to justify additional security costs.In most applications, the economicconsequences of unauthorized or accidentaloperation of a control system will be moresignificant than the value of the equipment.• Location:If the enclosure will be installed in a fencedarea, within a building or in other secureareas, the security requirements will beaffected. The selection of latches and hingescan be influenced by the location of adjacentequipment or other enclosures.These considerations should be evaluated in selecting thehardware to secure an enclosure cover or door. Otherconcerns unique to the application may exist and thedesigner is responsible to identify and evaluate any additionalconsiderations.Latches and hinges may be fabricated from a differentmaterial than the enclosure. The chemical resistance of theconstruction materials is included in the Materials Section,pages 344 - 345, and must be evaluated by the designer forthe specific application.HingesContinuous hinges have the greatest physical strength andprovide the best security. Lift off fiberglass hinges have lessstrength, but offer flexibility such as easy door or coverremoval that is not available with continuous hinges. In manycases when the enclosure type is selected, the hinge type isautomatically selected because the hinge is an integral partof the enclosure. For some enclosures it is possible to selectthe hinge type or hingeless options such as cover screws,clamps and latches.LatchesA more extensive variety of latching options are available toadapt enclosures for specific security requirements. Thevarious latching options and ordering information areprovided in the Accessories Section.• Appearance: Enclosure appearance can be influenced byboth hinges and latches. Some enclosuresare designed with hidden hinges and quarterturn latches to make these features lessprominent.TECHNICALINFORMATION<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com356
OverviewTechnical InformationEnclosure Temperature ControlElectrical and electronic components are continually beingreduced in size allowing designers to place more equipmentin a smaller space. This concentration of equipmentgenerates higher internal temperatures and makes heatdissipation very important. Overheating causes electricalinsulation to deteriorate and shortens the life of electricaland electronic components. As a rule of thumb, atemperature rise of 18°F (10°C) inside an enclosure willreduce the service life of electronics by approximately 50%.Temperature RiseEnclosure temperature rise is the temperature differencebetween the air inside the enclosure and the air outside theenclosure as generated by the heating of equipment housedwithin the enclosure. Ambient temperature is thetemperature of the air surrounding the enclosure; theoutdoor ambient temperature can range from less than 60°Fin the arctic to more than 125°F in the tropics. Some indoorapplications may have higher ambient temperatures,especially in process applications. The enclosuretemperature rise is independent of the ambient temperature;it is dependent on the heat generated within the enclosureand the steps taken to dissipate that heat. To establish themaximum service temperature, the maximum ambientapplication temperature and the temperature rise are added.For example, if the maximum ambient temperature is 130°Fand the temperature rise from an internal heating load of100 watts is 50°F, the maximum service temperature will be180°F.In considering methods to dissipate heat, heat is transferredin three ways:• Conduction is the transfer of kinetic energy from onemolecule to another; heat flows from hot to cold areas.• Convection is the transfer of heat by mixing fluids, eithernaturally or forced by a fan or air conditioning.• Thermal Radiation is the transfer of energy byelectromagnetic waves.Influences of Heat TransferTechnicalInformationConvection and thermal radiation are used most often todissipate heat from enclosures. Because fiberglass is usedas a thermal insulator, a common misconception exists thatfiberglass enclosures operate at significantly highertemperatures than metal enclosures. To the contrary,performance data reflect that enclosure material has littleinfluence on the operating temperature and confirm thatnon-metallic and painted metallic enclosure function atnearly the same temperature with the same internal heatload. Based on these observations material thermalconductivity is not a major factor in determining heat transferfor an enclosure.Even though the thermal conductivity of the compositeplastic is much less than aluminum or steel, the heattransfer characteristic of fiberglass and metal enclosures aresimilar. Other factors such as the high thermal insulation ofair contained within the enclosure along with the finish, colorand total surface area of the enclosure have more influenceon heat transfer than thermal conductivity. In general thefinish and color of an enclosure most affect the heat transfercapability, In-door and in out-door applications.Thermal conductivity is commonly measured inBTU/hr/ft 2 /°F/in, the K Value. K units represent the quantityof heat, which can pass through one square foot ofmaterial in one hour for every °F in temperature differenceacross one inch of material thickness. Larger K valuesindicate better heat conductivity. The K value forfiberglass is 1.68; the K value for steel is 334; and the Kvalue for aluminum is 1050.The heat transfer factor (Q) is measured in BTU/hr/ft2/°F orwatts/ft 2 /°F. For the analysis in this section the Q value usedfor steel enclosures is 1.25 BTU/hr/ ft 2 /°F (0.37 watts/ft 2 /°F);for fiberglass enclosures the Q value is 0.62 BTU/hr/ft 2 /°F(0.2 watts/ft 2 /°F). The Q value for sheet metal enclosureswill vary between 1 BTU/hr/ft 2 /°F (0.29 watts/ft 2 /°F) and 5BTU/hr/ft 2 /°F (1.46 watts/ft 2 /°F), depending on the amount ofenclosure insulation.TECHNICALINFORMATION357<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Enclosure Temperature ControlAir as an InsulatorIf metals have much better thermal conductivity, why doesequipment in a fiberglass enclosure operate at nearly thesame temperature as in metal enclosures? The air confinedwithin the enclosure has a K value of 0.017, almost 100 timesless than fiberglass. The thermal resistance of the air andthe enclosure wall material are in series and must be added.Because air is a superior thermal insulator compared toeither fiberglass or steel, it is a predominant factor inestablishing heat dissipation. This helps explain whyequipment operates at the same temperature regardless ofwhich enclosure material is used and also why environmentalcontrol systems heat or cool the air to control the internaltemperature.Surface Area as a FactorAnother factor, which directly influences heat dissipation, issurface area. If the enclosure surface area is doubled with agiven internal heating load, the temperature rise will only behalf as great. It is important to remember that surface area isnot necessarily related to enclosure volume, i.e., anenclosure having twice the surface area does not alwayshave twice the volume.Other Related IssuesCertain applications may require the walls of an enclosure toact as a heat sink. For example, it is not uncommon tolocate a high power semiconductor on the wall of a metalenclosure to dissipate heat. Fiberglass will not perform thisfunction efficiently because the compression-molded wallshave negligible thermal conductivity. In this applicationconduction is used to dissipate the heat and a fiberglassenclosure will not function the same as a metal enclosure.Enclosure Temperature RiseThe internal temperature rise for many popular enclosuresizes may be found by using Table 1., Enclosure SurfaceAreas, in conjunction with Figure 1. Enclosure InternalTemperature Rise vs. Heat Load. The heat generated in anenclosure varies and depends on the equipment mounted inthe enclosure and the application. The total internallygenerated heat is calculated by gathering information fromvendors supplying the components or making an estimatebased on experience. Heat input values provided in BTU/hrare divided by 3.413 to convert to watts. Safety factorsshould be considered to mitigate uncertainties.Divide the internal heat load expressed in watts/ft 2 by thearea of the enclosure found in Table 1. The answer inwatts/ft 2 may then be used to find the temperature rise byutilizing Figure 1. For enclosures not listed in Table 1, totalsurface area may be calculated using this formula,AREA = [2(A x B) + 2(A x C) + 2(B x C)]/144,Where A, B, and C are the respective internal height, widthand depth dimensions of the enclosure in inches. If anenclosure is mounted flush against a wall or adjacent to otherenclosures, additional formulae are provided in Table 2.ExampleA J1816 enclosure contains a device that generates 120watts, calculate the internal temperature rise.SolutionTable 1 shows that a J1816 enclosure has a surface area of7.77 ft 2 . Dividing the heat load, 120 watts, by the area, 7.77ft 2 , = 15.44 watts per ft 2 . Figure 1. Internal TemperatureRise vs. Heat Load shows a heat load of 15.44 watts/ ft 2corresponds to a temperature rise of 51°F above ambient.TECHNICALINFORMATION<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com358
Technical InformationEnclosure Temperature ControlTechnicalInformationTable 1. Approximate Enclosure InternalSurface Areas for Popular Enclosure SizesFiberglass <strong>Enclosures</strong>Internal Internal InternalCat. No. Area Sq. Ft. Cat. No. Area Sq. Ft. Cat. No. Area Sq. Ft.N16107 5.37 N30247 17.08 J1407 3.27N20166 7.98 N302410 19.53 J1412 4.24N20168 8.98 N302412 20.95 J1614 5.36N201610 9.97 N302414 22.50 J1816 7.77N201612 10.98 N302416 24.06 J2016 9.39N201616 12.82 N302422 27.17 CL707 1.51N201619 14.31 N36308 24.82 CL907 1.81N24126 8.04 N363012 28.60 CL1109 2.82N241210 10.09 N363016 32.41 CL1311 3.89N241220 15.08 N363023 39.02 CL1513 5.11N242410 15.72 N483612 39.87 C1610 5.37N30206 13.39 N483616 44.57 C2016 8.98N30208 14.78 J606 1.16 C2412 10.09N302010 16.17 J806 1.45 C2424 15.72N302012 17.56 J1008 2.01 C3024 19.53N302014 18.95 J1210 3.09 C3630 26.71Testing MethodsThe temperature graph was developed through empirical testing using several enclosures of various sizes. The temperaturesrepresent an average of one temperature measurement near the bottom of the enclosure and a second measurement near thetop. Electric heaters mounted equidistant from the internal surfaces of the enclosure were used as the heat source. Becausehot air rises, a significant temperature gradient occurred from top to bottom. Typical of an actual installation, the top was muchhotter than the bottom.The Influences on Temperature RiseThe placement of internal parts can affect temperature and enclosures should be sized liberally in application were temperaturerise is critical. Recall that a larger enclosure with twice the surface area reduces the temperature rise by 50%.TECHNICALINFORMATION359<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Enclosure Temperature ControlFigure 1. Internal Temperature Rise vs. Heat LoadExterior surface finishes significantly influence temperaturerise in outdoor applications. For example, painted steel andfiberglass enclosures dissipate heat better than unfinishedaluminum enclosures, even though aluminum has superiorthermal conductivity, because the colored surfaces offiberglass and painted steel enclosures are more efficientthermal radiators than unfinished aluminum. Paintedsurfaces have an emissivity of 0.96 whereas an unfinishedaluminum surface has an emissivity of 0.45. In outdoorapplications light colored enclosures have a high reflectancewhich minimizes solar heat gain while dissipating internallygenerated heat at about the rate as a similar size darkcolored enclosure.TECHNICALINFORMATION<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com360
Technical InformationEnclosure Temperature ControlTechnicalInformationTECHNICALINFORMATIONAdditional Cooling MethodsWhen it has been determined that the heat load is too largefor an enclosure to dissipate by radiation and convection,the following supplemental cooling methods are available:Louver and Special Ventilation SlotsLouver and special ventilation slots are designed to removeheat from the enclosure by allowing natural air circulationaround the heat source and ex-hausting the hot air throughslots or louvers. This method is relatively inexpensive andhas no operating cost; however, it can only be used todissipate a limited amount of heat and it is difficult to predictthe temperature drop produced by a vent utilizing naturalconvection. Louvers are shown on page 325.Circulating FansIn larger sealed enclosures a fan can be used to circulatethe air and reduce localized heat concentrations; however,the applications are limited because a closed system fanonly redistributes heat, it does not dissipate the heatgenerated by the hot spot.Where an enclosure does not need to be sealed from theoutside environment, fans can be used to circulate airthrough an enclosure and dissipate the heat generated bypower supplies, transformers and other heat producingequipment. Fans can provide as much as 10 times the heattransfer rate of natural convection a radiation. Once theheat input in watts/ft2 is determined and temperature rise isestablished from Figure 1, the following equation can beused to calculate the fan flow rate:Fan Flow Rate (CFM) = 3.17 x Internal Heat Load(watts)/Temperature RiseExampleEquipment in an N363612 enclosure generates sufficientheat to require a fan, which will dissipate <strong>300</strong> watts. Themaximum ambient temperature in the applicationenvironment is 115°F. If the temperature of the othercontents in the enclosure cannot exceed 125°F, what size isrequired?The allowable temperature rise is 125°F - 115°F = 10°F.The application requires dissipation of <strong>300</strong> watts.SolutionTo determine the cubic feet per minute (CFM) required in astandard application, use the following equation (if the airdensity is significantly more that 0.075 lb. per cubic foot, anon-standard application exists and this equation should notbe used):Fan Flow Rate (CFM) = 3.17 x <strong>300</strong> watts/10°FFan Flow Rate (CFM) = 95 CFMThis calculation is exact, but adding an additional 25%capacity to the CFM level is standard to provide a safetyfactor.1.25 x Fan Flow Rate (CFM) = 1.25 x 95 CFM = 119 CFMIf the air density is non-standard (significantly more than1.075 lb. per cubic foot), the following equation can be usedto calculate the fan capacity:Fan Flow Rate (CFM) x 0.075 lb. per cubic foot /<strong>Non</strong>-standard Air Density (lb. per cubic foot)The intersection of the <strong>300</strong> watts dissipated line and the 6"fan performance curve occurs at a temperature risebetween 4° and 5°F. This is below 10°F and complies withthe specification. Based on the performance curves, ablower would also be acceptable in this application becausethe temperature rise is about 6°F. This method establishesan approximate fan or blower size.Fans can be used to draw air through an enclosure andexhaust how air from an enclosure or to draw cool air intoand circulate it through an enclosure or to draw cool air intoand circulate it through an enclosure. An inlet fan offers thefollowing advantages:• Raises the internal pressure, which helps keep dust anddirt out of an unsealed or frequently open enclosure.• More turbulent airflow improves heat transfer.• Longer fan life in cooler incoming air.361<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Enclosure Temperature ControlThe following considerations are important in locating a fan:• Avoid placing transformers, power supplies or other heatgenerating devices in front of the fan. Although this coolsthe device, it increases the heat load on other deviceswithin the enclosure. It is best to place these devices nearthe exhaust outlet.• To achieve maximum cooling, the inlet and outlet should beseparated by the maximum distance. If the outlet and inletare adjacent to each other, the hot outlet air will be drawninto the inlet and cooling efficiency will be reduced. Ingeneral the inlet should be at the bottom of the enclosureand the outlet at the top.• Fans should not be used or located in areas where theairflow is restricted. A plenum is recommended toaccelerate air velocity and improve fan performance. Aplenum is particularly helpful when a filter is used whereairborne contaminants are a problem.• The air outlet area should at least equal the inlet area. Forbest results the exhaust opening should be 1.5 times thearea of the fan opening.• Air is less dense at high altitudes. For this reason airflowshould be increased in high altitude applications.• All fans used in parallel should be identical.Heat Exchangers - CoolingApplications requiring sealed enclosures present the greatestneed for cooling to maintain safe operating temperatures.Heat exchangers are a good option when precise control ofheat and humidity are not required and the heat transferrequirements are significant. The required heat exchangercapacity can be calculated using the formula,Heat ExchangerCapacity (watts/°F) =Internal Heat Load/T + 0.22 xEnclosure Surface Area,Where T = Temperature Rise.ExampleIf the internal heat load is 1000 watts in an N603616Fiberglass enclosure, what is the minimum cooling capacityfor the heat exchanger unit? The Maximum ambienttemperature is 130°F and the internal equipment willmalfunction if the internal enclosure temperature exceeds105°F.Internal Heat Load = 1000 wattsMaximum Temperature Differential = Ti - To =105°F-130°F = -25°F = [125°F ], use Absolute Value.Enclosure Surface Area = 53.49 ft 2Heat Exchanger Capacity = 1000 watts/(25°F) - 0.22 x 53.49ft 2 = 28.23 watts/°FIn this example the surface area acts to cool the enclosureand is subtracted, the Absolute Temperature Value is usedbecause this is a temperature difference.Air Conditioning-CoolingAir conditioning will be required in high ambient temperaturelocations where precise temperature control and humidityreductions are required in a sealed enclosure. Air conditioningcan also be required where neither convection, thermalradiation, louvers, slots nor a circulating fan system provideadequate cooling. Because air conditioners remove moisturefrom the enclosure, a condensate drain is generally required.The four-step process to size and select the air conditioner isinfluenced by the internal heat load, enclosure size and theapplication environment. The following information isrequired:Step 1. Determine the Internal Heat LoadHeat generated by all sources within the enclosure shall beadded together to establish the internal heat load in watts.The heat load in watts may be multiplied by 3.413 to convertto BTU/hr.Internal Heat Load ________________ watts X 3.413BTU/hr/watt =_______________ BTU/hr.TECHNICALINFORMATION<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com362
Technical InformationEnclosure Temperature ControlStep 2. Calculate the Surface Area of the EnclosureTable 1 earlier in this section provides the surface area formost popular freestanding enclosure sizes. If the enclosureis mounted on a wall or against another enclosure, thesurface area calculation may be modified as identified inTable 2.For an enclosure size not shown in Table 1, the surfacearea can be calculated by using this formula.SURFACE AREA = [2(AxB)+2(AxC)+2(BxC)]/144 IN 2 =AREA IN SQUARE FEETStep 3. Establish the Temperature DifferentialThe temperature differential (T) is calculated bysubtracting the maximum allowable temperature inside theenclosure (Ti) from the maximum ambient temperatureoutside the enclosure (To).To - Ti = T = _______°FStep 4. Calculating the RequiredAir Conditioning CapacityThe values determined in the first three steps are used tocalculate the required capacity of the air conditioneraccording to the following formula,Cooling Capacity (BUT/hr) = Surface Area x T x Q +Internal Heat Load, where Q = 0.62 BTU/hr/ft 2 /°F (0.2watts/hr/ft 2 /°F) for fiberglass enclosures.ExampleIf the internal heat load is 500 watts in an N20168fiberglass enclosure, which is wall mounted, what is thecooling capacity required for the air conditioning unit? Themaximum ambient temperature is 125°F and the internalequipment will malfunction if the internal enclosuretemperature exceeds 110°F.TechnicalInformationStep 1: Internal Heat Load = 500 watts = 3.413 x 500 watts= 1707 BTU/hrStep 2: From Table 1, Total Surface Area = 8.98 ft°Step 3: Temperature Difference:T= To - Ti = 125°F - 110°F = 15°FStep 4: Air Conditioner Capacity8.98 ft 2 x 15°F x 0.62 BTU/hr/fr 2 /°F + 1707 BTU/hr= 1790.5 BTU/hr8.98 ft 2 x 15°F x 0.2 watts/ft 2 +500 watts= 526.9 wattsDetailed information on air conditioning systems can beprovided by <strong>Stahlin</strong> <strong>Enclosures</strong>.Air Conditioning - HeatingSome enclosure systems have minimum as well asmaximum operating temperature limitations. When theequipment in an enclosure must be maintained above aminimum temperature at low ambience, these sameequations can be modified and used to calculate thesupplemental heat required to select and size the heaters.The only differences are that the internal heat load will helpheat the enclosure and the temperature difference, T, iscalculated by subtracting the minimum ambient temperature(To) outside the enclosure from the required temperature (Ti)inside the enclosure. The minimum supplementary heat canbe calculated according to one of the following equations:T = To - TiSupplementary Heat = [Surface Area x ( T - 1)] /4.1or = Surface Area x T x Qwhere Q = 0.2 watts/ft 2 °FTECHNICALINFORMATION363<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Enclosure Temperature ControlExampleIf the internal heat load in 100 watts in an N20168 Fiberglassenclosure, which is wall mounted, what is the minimumheating capacity for the heating elements? The minimumambient temperature is 0°F and the internal equipment willmalfunction if the internal enclosure temperature drops below40°F.T = To - Ti = 40°F -0°F = 40°FSupplementaryHeat = [8.98 ft 2 x (40°F -1)] /4.1 = 85.4 watts- or -8.98 ft 2 x 40°F x 0.2 watts/ft 2 °F = 71.84 wattsTwo Commonly used, but different, equations shown abovehave been used to show the effect of using different heattransfer values.In addition to heating, supplementary heaters are often usedin enclosures to keep the internal enclosure ambienttemperature a few degrees above the ambient temperature toprevent condensation on internal equipment.Equipment for Climate ControlMost cooling or heating requirements can be calculated fromthe data in this section. If you have a problem determiningyour cooling or heating requirements or selecting the properclimate control equipment, please contact <strong>Stahlin</strong> <strong>Enclosures</strong>for assistance.TABLE 2. CALCULATION OF ENCLOSURE SURFACE AREA DEPENDING ON LOCATIONEnclosure Configuration Position Formula for Surface Area Surface Area of N20168Single Enclosure, Free Standing ■ [2(AxB) + 2(AxC) + 2(BxC)]/144 8.98 ft 2Single Enclosure, Free Standing* ■ [1.8(AxB) + 1.8(AxC) + 1.4(BxC)]/144 7.66 ft 2Single Enclosure, Against a Wall ––––– [1.4(BxA) + 1.4(BxC) + 1.8(CxA)]/144 6.78 ft 2■Side by Side <strong>Enclosures</strong>; First or ■ ■ ■ [1.4(CxA) + 1.4(BxC) + 1.8(BxA)]/144 7.16 ft 2Last Enclosure in Bank of <strong>Enclosures</strong>Side by Side <strong>Enclosures</strong>; First or ––––– [1.4(AxB) + 1.4(AxC) + 1.4(BxC)]/144 6.28 ft 2Last Enclosure in Bank of <strong>Enclosures</strong> ■ ■ ■Against WallSide by Side <strong>Enclosures</strong> Not at ■ ■ ■ [1.8(AxB) + 1.4(BxC) + (AxC)]/144 6.65 ft 2the End of Enclosure BankSide by Side <strong>Enclosures</strong> within ––––– [1.4(AxB) + 1.4(BxC) + (AxC)]/144 5.77 ft 2an Enclosure Bank, Bank Against a Wall ■ ■ ■Side by Side <strong>Enclosures</strong> within an ––––– [1.4(BxA) + 0.7(BxC) + (CxA)]/144 5.05 ft 2Enclosure Bank, Bank Against a Wall ■ ■ ■ ■& Roof Above*Depending on the enclosure design, the complete surface area may not be exposed for cooling.This formula and the remaining ones are conservative and account for such differences.TECHNICALINFORMATION<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com364
Technical InformationEnclosure EMI/RFI ShieldingTechnicalInformationTECHNICALINFORMATIONThe requirements and standards for enclosureelectromagnetic compatibility are continually increasing withthe proliferation of electronics for industrial process control,information processing, and communication equipment. Inthe United States the Federal Communications Commissionestablishes the requirements and regulates the amount ofelectromagnetic interference, (EMI). Since January 1, 1996the European Union (EU) has enforced legislation,Electromagnetic Compatibility (EMC) Directive 89/336/EEC,which regulates the amount of EMI and Radio FrequencyInterference (RFI) that products can emit or must repel tofunction acceptably.While the enclosure itself is not covered by theserequirements, once the electronic equipment is installedwithin the enclosure, the package must comply withapplicable EMI/RFI directives. Shielding andelectromagnetic compatibility are highly specialized withtheir own terminology. The following definitions will help tospecify EMI/RFI compatibility and select enclosures if theacronyms and technology are unfamiliar:Attenuation A measure of the ability to contain or repelEMI/RFI energy. It can also be called shielding effectivenessand is usually expressed in decibels (dB).Decibel (dB) Unit to express the effectiveness of a materialor system in reducing electromagnetic interference. If ashielded enclosure reduces the EMI by 30 dB, the power ofthe interfering wave will be reduced by a factor of 1000 inpassing through the enclosure. If the EMI reduction is 40dB, the power is reduced by a factor of 10,000. Theequation for calculating attenuation in decibels is dB = 10log10 (P1/P2) where P1 = power of the interference wavebefore it passes through the enclosure, P2 = power of thewave after it has been reduced (attenuated) by theenclosure.Electromagnetic Emission Electrical energy radiated intothe environment intentionally by an antenna or incidentallyby an electronic component or power equipment during aswitching operation.Electromagnetic Field Invisible fields which surroundenergized conductors such as wires and antennas. A fieldhas both electric and magnetic components.Electromagnetic Immunity The capability of an electroniccomponent or electrical equipment to perform its intendedfunction in the presence of external electromagnetic fields.EMI (ElectroMagnetic Interference) Randomly radiatedelectrical energy which can emanate from high voltageequipment or power lines, welding equipment, switches,relays, spark plugs, or any device that generates an electricspark or corona. The random voltages or currents generatedby these sources are coupled to electronic systems withundesirable results. EMI waves are not well ordered, varywidely in intensity, and cause interference over a widefrequency range. The sun is a natural generator of EMI.EMC (ElectroMagnetic Compatibility) The ability ofelectronic equipment to perform its intended function in thepresence of EMI and RFI disturbances without affectingproper operation.EMP (ElectroMagnetic Pulse) Interference caused by alarge and sudden electrical discharge such as lightning.EMP is short in duration but can radiate intense power. LikeEMI, EMP is not well ordered and causes interference overa wide range of frequencies.Ohms per Square A measurement unit for electricalcontinuity of the metal coating applied internally to fiberglassenclosures for EMI/RFI shielding. Although the coatingthickness influences shielding to some extent, the electricalcontinuity is much more important. The conductive coatingon <strong>Stahlin</strong> <strong>Enclosures</strong> typically measures less than 2 ohmsper square. The surface resistance (or conductivity)measurement is without units because the surface areadoes not influence the reading, i.e., measurements taken ona large sheet of conductive material will yield the sameresult over 1sq in, 1 sq. ft, 1 sq. yd., or 1 sq. meter.365<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Enclosure EMI/RFI ShieldingRFI (Radio Frequency Interference) Interference caused byradio waves which emanate from commercial radio andtelevision stations, amateur radio broadcasts, radar,microwave ovens, etc. Radio waves are usually well definedin terms of amplitude and frequency.Military specification, MIL-STD-285, is used to test theshielding effectiveness of <strong>Stahlin</strong> <strong>Enclosures</strong>. The procedureinvolves placing a transmitting antenna within the enclosureand a receiving antenna outside the enclosure.Measurements are then made alternately with the enclosuredoor/cover open and closed. The difference between theopen and closed measurements expressed in dB is theshielding effectiveness. Measurements are usually made at10 frequency points ranging from 0.01 to 1000 MHz.The degree of EMI/RFI shielding depends on the application.Extremely sensitive instruments such as anelectroencephalograph to record brain waves may requireshielding in excess of 100 dB; less complex applications suchas car radios may require only 30 dB. EMI/RFI shielding maynot be needed in every application and the shielding of astandard enclosure may be adequate for less sensitiveapplications.Depending on the enclosure design and frequency of theEMI/RFI, the attenuation of a standard <strong>Stahlin</strong> non-metallicenclosure without modification will vary between 0 and 20 dB.With modifications to include EMI/RFI protection, theenclosure can provide between 40 and 80 dB attenuation.Fiberglass enclosures are an ideal choice in harshlycorrosive environments, but being nonmetallic, they provideno EMI/RFI shielding. Fiberglass enclosures can be coatedinternally with a highly conductive nickel coating that providesexcellent EMI/RFI shielding. The coating has been tested byan independent test laboratory and provides an averageattenuation of 60 dB over the frequency range from 0.01 to10000 MHz. Modified EMI/RFI shielded windows andgaskets are also required for all shielded enclosures.The fiberglass coating description and properties areprovided in the following table:COATING DESCRIPTION AND PROPERTIESShielding MaterialBinderPencil HardnessSheet ResistanceAttenuationNickelAcrylic> 9 H< 2.5 Ohm/Square60 - 65 dBIf EMC is required for your application, check EMI/RFIShielding on the Features Selection Sheet and complete theblock by specifying the required attenuation. If you need helpor require a quote for this option, please consult the factory.TECHNICALINFORMATION<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com366
Technical InformationEnclosure Installation ConsiderationsAlthough installation is not directly related to enclosureselection and may not seem appropriate in a TechnicalSection, the following aspects of installation should beconsidered when the enclosure is selected:Equipment Mounting PanelThe back panels are optional and must be selected andordered separately. Enclosure back panels can befabricated from aluminum, painted carbon steel, fiberglassand stainless steel. The enclosure construction materialand the amount of time that an enclosure may be open andexposed to the application environment should beconsidered in making this selection.TechnicalInformationAll hubs use an O-Ring to seal between the hub andenclosure wall. PLASTI-BOND hubs incorporate additionalfeatures which include a“sleeve” and a “skirt”. Thesleeve is designed to fitsnugly over the exteriorPVC coating on ROBROYPVC Coated Conduit andthe skirt is designed to sealagainst the enclosure wall.Nylon Cord Grip Fittings aredesigned to seal outmoisture, dust or other foreign material and to form apositive sealing grip when installing an entrance cord or wirethrough an enclosure wall. A selection of Nylon Cord Gripsappears on page 328.Sigma Form Feedthrough Seals provide a similar function toprovide a watertight, fumetight seal at cable entrances toenclosures.Wiring ConnectionsPages 327 and 328 of the Accessories Section showhubs and cable connections for connecting conduit andcable to enclosures. Hubs for connecting conduit toenclosures include:Enclosure MountingIn addition to wall mount and floor mounts that are usuallyselected when the enclosure type is selected, <strong>Stahlin</strong><strong>Enclosures</strong> also offers pedestal mounting, mounting feetand custom fabricated floor mounting kits.1. PLASTI-BOND Hubs (PVC coated metal hubs designedfor use with ROBROY PLASTI-BOND REDH 2 OT ANDL2BOND PVC Coated Rigid Metal Conduit Systems).2. PVC Hubs (for use with PVC Conduit).3. Aluminum Hubs (for use with metal conduit).TECHNICALINFORMATION367<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Enclosure Installation ConsiderationsGroundingGrounding the electrical and electronic equipment inenclosures is extremely important for two reasons:1) The safety of personnel in operating the equipment and 2)Prevention of equipment damage from transient voltagesgenerated by switching conditions, system faults andEMI/RFI. Grounding continuity must be maintained betweenthe equipment in the enclosure and the conduits or cablesentering and exiting the enclosure.Since fiberglass is an insulator, grounding must bemaintained by using jumpers between the internal equipmentand conduit or cable connections in fiberglass enclosures. Tomeet this need, conduit hubs for use in fiberglass enclosuresmust have built-in grounding screws to comply with UL andNEC requirements. Grounded fiberglass enclosures can beordered by checking the box on the Enclosure SelectionWorksheet for grounding stud and adding a G suffix to theenclosure catalog number.The key to a reliable electrical system including the enclosureis a grounded system with all materials properly selected forthe application and installed in accord with the recommendedinstallation guidelines, the product listing and the NationalElectric Code (NEC). For more information on grounding,refer to Underwriters Laboratories Specification UL 50 andthe National Electric Code, Article 250.It is important to note that the ground element of all electricalsystems is the most important element, but it remains one ofthe least understood and most error prone part of anyelectrical system.TECHNICALINFORMATION<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com368
Technical InformationEnclosure Installation ConsiderationsTechnicalInformationTECHNICALINFORMATIONWhat is Torque?Torque is a twisting force. Torque isapplied to your watch stem when youwind your watch. You apply torque tounscrew the top of a mason jar. Torquecaused rotation of a shaft, or it will setup a twist in a stationary shaft. It isgenerally expressed in foot pounds orinch pounds.How is Torque Determined?If a shaft connected to a 2 ft. lever orarm requires 2 lbs. of force to cause itto rotate, the torque would be 4 ft. lbs.The formula for torque is: T = R x S.Where R = Radius or length of thelever. S = Pounds Pull on Scale.Properly fastened threaded productsachieve their holding power from thetension (or torque) that is derived fromthe mating of the external and internalthreads subject to the elastic limit ofthe material.What torque to apply is a generallyasked question, but the answerdepends on the variables of material,threads' class of fit, method of threadmanufacture, and thread lubrication- if any.The table in the corresponding page isoffered as the suggested maximumtorque values for threaded productsmade from Corrosion-Resistantmetals. The table is only a guide.Actual tests were conducted on dry, ornear dry, products. Mating parts werewiped clean.All values shown on chart except forNylon represent a safe working torque;in the case of Nylon only, the figuresrepresent breading torque.Strength CharacteristicsBolt 18-8 Brass Silicon Aluminum 316 Monel Nylon*Size St. St. Bronze 2024-T4 St. St.In. Lbs. In. Lbs. In. Lbs. In. Lbs. In. Lbs. In. Lbs. In. Lbs.2-56 2.5 2.0 2.3 1.4 2.6 2.5 .442-64 3.0 2.5 8.0 1.7 3.2 3.13-48 3.9 3.2 3.6 2.1 4.0 4.03-56 4.4 3.6 4.1 2.4 4.6 4.54-40 5.2 4.3 4.8 2.9 5.5 5.3 1.194-48 6.6 5.4 6.1 3.6 6.9 6.75-40 7.7 6.3 7.1 4.2 8.1 7.85-44 9.4 7.7 8.7 5.1 9.8 9.66-32 9.6 7.9 8.9 5.3 10.1 9.8 2.146-40 12.1 9.9 11.2 6.6 12.7 12.38-32 19.8 16.2 18.4 10.8 20.7 20.2 4.38-36 22.0 18.0 20.4 12.0 23.0 22.410-24 22.8 18.6 21.2 13.8 23.8 25.9 6.6110-32 31.7 25.9 29.3 19.2 33.1 34.9 8.21/4"-20 75.2 61.5 68.8 45.6 78.8 85.3 16.01/4"-28 94.0 77.0 87.0 57.0 99.0 106.0 20.85/16"-18 132 107 123 80 138 149 34.95/16"-24 142 116 131 86 147 1603/8"-16 236 192 219 143 247 2663/8"-24 259 212 240 157 271 2947/16"-14 376 317 349 228 393 4277/16"-20 400 327 371 242 418 4511/2"-13 517 422 480 313 542 5841/2"-20 541 443 502 328 565 6139/16"-12 682 558 632 413 713 7749/16"-18 752 615 397 456 787 8555/8"-11 1110 907 1030 715 1160 13305/8"-18 1244 1016 1154 798 1301 14823/4"-10 1530 1249 1416 980 1582 18323/4"-16 1490 1220 1382 958 1558 17907/8"-9 2328 1905 2140 1495 2430 27757/8"-14 2318 1895 2130 1490 2420 27551"-8 3440 2815 3185 2205 3595 41301"-14 3110 2545 2885 1995 3250 3730Ft. -Lbs. Ft. -Lbs. Ft. -Lbs. Ft. -Lbs. Ft. -Lbs. Ft. -Lbs.1-1/8"-7 413 337 383 265 432 4991-1/8"-12 390 318 361 251 408 4701-1/4"-7 523 428 485 336 546 6271-1/4"-12 480 394 447 308 504 5751-1/2"-6 888 727 822 570 930 10641-1/2"-12 703 575 651 450 732 840*Nylon figures are breading torque, rather than safe working torque.The 3/8" diameter and under metal products were roll-threaded and, where size range permitted, were made onautomatic bolt making equipment.369<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Enclosure Installation Considerations - Torque Continued • Cutting & DrillingTorque Formula IllustrationsS...................................T(Ft. lbs.) = R x SRMethods For Making Holes And Cutouts In <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong>Drilling of composite fiberglass material has been difficult and, for some, a mystery. The ability to accurately drill holes incomposite fiberglass material has been the subject matter of numerous articles and how to demonstrations. Composites offerthe benefits of part integration and minimization along with substantial savings in weight. Along with this is a reduction in therequirements for machining operations that need to be performed to complete an assembly. However all drilling and cuttingoperations can not be avoided completely in most cases. There are several types of machining operations that can beperformed on composites such as turning, drilling, routing, trimming, sanding, and milling. Most of these operations are similarto metal removal techniques but there are some differences that need to be addressed in order to make clean, high qualityholes and cutouts in composites.Delaminating of the outer surface and glass fibers directly below the surface are the main failure modes noticed when holes orcutouts are drilled or cutout improperly. Most times excessive edge chipping around the perimeter of the cutout or hole is due toimproper tools used and methods applied.Other times excessive fiber pulls orattached fibers not sheared off during thecutting or turning process can also causedelamination failure from the tearingaction during material removal. Impropertools used and/or methods are also aculprit of this failure mode. All these canlead to downstream assembly problems,functionality problems, and becomeaesthetically unappealing if taken to theextreme. The most common source offailure mode when making holes in anenclosure is a dull cutting tool. Dull toolstend to rip or tear the material rather thancutting or shearing the material and glassfibers. The main culprit for tools becoming dull is glass fibers embedded in the material. These glass fibers are very abrasiveand can cause a tool to become dull very quickly. A little planning and understanding of the proper methods to machiningcomposites up front can make all the difference in the final outcome of the operation.Figure A shows delamination of the surface of the part at the drill entrance.Figure B shows similar delamination just prior to drill exit.TECHNICALINFORMATION(Continued on the following pages)<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com370
Installation ConsiderationsCutting & Drilling ContinuedTechnicalInformation1. Hole Saw. The easiest and least complexmethod to provide an opening in a compositeenclosure is to use a fine-toothed hole saw. Youmust first layout the size and location of the cutout,pre-drill a small hole in the center within the cutoutarea for the hole saw to start, and then carefullycut out the area to be removed. This is more timeconsuming and the least accurate method but canbe accomplished in almost any environment.Keeping the saw perpendicular to the cuttingsurface, maintaining a consistent sawing acting, and using a diamond impregnated hole saw or fine toothed saw will providethe highest quality cutout with minimal edge chipping.2. Drilling, Boring. Putting roundholes in enclosure walls or thru theenclosure door is the most commontype of cutout used to provide entryinto an enclosure and access to thecomponents housed within. The mostcommon tool used is the standardtwist drill. A recommended toolwould be a carbide tipped or PCDdiamond tipped tool that will maintaina sharp cutting edge. HSS tools willalso work but they will become dullvery quickly resulting in excessiveedge chipping and a poor looking hole. We also recommend using high RPM's and low feed rates when using drills. This reducesthe chipping around the cutout. The single most important factor though is keeping a very sharp tool.Drill geometry and feed rates are the largest contributing factors when drilling composites. Using a drill with a positive rake angleand thin points or split points can help reduce cutting pressure and thus delamination at both entrance and exit. Feed rates mustalso be constant and may even be reduced upon exiting from a hole to reduce flexing of the part when the drill exits. Using a solidback surface to support the part when drilling can also aid in reducing delamination and chipping.TECHNICALINFORMATION371<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Cutting & Drilling Continued3. Routing. A third method is to use a carbide router bit and router.This method produces very clean holes and cutouts but also requiresthe holes and cutouts to be manually laid out beforehand and asteady hand to stay within the layout lines. The use of a jig or fixtureto help guide the router is helpful to keep straight edges and cleancutouts. The use of diamond impregnated router bits is preferred forlongevity but carbide bits will work just as well.Jigsaws can also be used and are similar to routing of holes. Again,diamond impregnated cutters are preferred but fine toothed cutterscan also be used.4. Punching. A fourth method is to use astandard hole punch similar to what youwould use with metal boxes. Thisproduces a good clean hole but can leavechipped edges if the punch is dull. Againmaintaining sharp tools is essential toproducing clean cutouts. A pilot hole isrequired before using a standard holepunch. Manual or hydraulic punchactuators can both be used withcomposite materials. Punch press type manufacturing equipment can be utilized if production volumes warrant. Proper supportand sharp tools are necessary to produce chip free, clean holes.5. Alternative methods. Some additional methods that are sometimes used to machine composites are water jet cutting andlaser cutting. Both of these methods will produce very accurate, clean holes or cutouts but also require a high capital investmentin both equipment and employee training. In water jet cutting a high velocity stream of water and abrasive material is forcedthrough a small diameter (.010") jet. The stream of water quickly erodes the material with water pressure up to 60,000 psi and2600 ft/s. Laser cutting uses a concentrated raw light beam focused onto the part being cut. The cutting operation takes place bylocal melting as in thermoplastics, vaporization, and chemical degradation as in composites and thermosets.For more information about <strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong> contact:<strong>Stahlin</strong> <strong>Enclosures</strong>, 500 Maple Street, Belding, MI 48809Phone:616-794-0700, Fax: 616-794-3378Web: www.stahlin.com.References:Sanjay K. Mazumdar, PhDComposites Manufacturing, CRC Press, 2002TECHNICALINFORMATION<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com372
TechnicalInformationA non-haloginated fiberglass system that beatsthe effects of outdoor exposure plus provides thechemical and flame resistance you’ve come to expectfrom <strong>Stahlin</strong> Fiberglass <strong>Enclosures</strong>!TECHNICALINFORMATIONSolarGuard, in extensive comparisontesting, outperformed other available SMCformulations by as much as 60% in its ability toretain gloss and color after exposure toconcentrated UV light.SolarGuard maintained stability in thicknessproving that its physical properties remain verymuch intact despite EMMAQUA testing thatconcentrates natural sunlight using 10 highlyreflective mirrors to create an intensity level ofapproximately 8 suns!SolarGuard meets a NFPA No. 101 Class Aflame spread index. Fire retardancy, achievedthrough use of alumina trihydrate fillers, meetsUL 94 5V standards.SolarGuard is a non-haloginatedsystem...meaning that it contains no bromine andno antimony, thereby reducing the risk of smokebornetoxicity.SolarGuard requires less maintenance thanpaint, wax or gel-coat alternatives used toprolong the life of electrical enclosures in outdoorenvironments.How Does SolarGuard Do What It Does?SolarGuard’s patent-pending double-protectionformula was developed in <strong>Stahlin</strong>’s FormRight lab.Due to its chemical composition and other additives,SolarGuard is able to reduce the effects of UVdegredation such as surface roughening and fiberblooming.How does SolarGuard achieve this levelof performance?SolarGuard features new, proprietary doubleprotectionformulation technology that significantlyenhances the molecular bond strength andcrosslinking that occurs during the curing process inthermosetting polyester sheet molding compounds(SMC). <strong>Stahlin</strong>’s SolarGuard system fights polymerdegradation by making it much more difficult for UVlight to attack molecular bonds of both primary chainsand crosslinks.A special UV Absorber is added to theSolarGuard formulation which acts to absorb UVenergy, then to release it without damaging thepolymer chain. The neo-pentyl glycol (NPG) isopthalicbased resin system of SolarGuard ensures UL 945V fire retardancy, but provides a much stronger bondof the polymer chain resulting in significantly improvedweathering resistance.As the new standard SMC formulation for all <strong>Stahlin</strong>fiberglass electrical products, SolarGuard providesan unsurpassed level of UV resistance, fire retardancy,chemical resistance and safe, durableperformance...all without adding cost to <strong>Stahlin</strong>’s worldclass electrical enclosures.373<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
SolarGuard benefitsHow SolarGuard Benefits You!AT A GLANCE: DOUBLE PROTECTION THAT WORKS!1.) THE SOLARGUARD WAYThe SolarGuard formulation is a neopentylglycol (NPG) isopthalic based resinsystem that contains no bromine. Therefore,there are no weak links in the polymer chainmaking the UV energy required to breakthese links significantly greater. The result?SolarGuard SMC material provides muchbetter UV weathering characteristics. Fireretardancy requirements are still achievedand maintained via fillers that meet UL 94 5Vstandards.2.) THE SOLARGUARD WAYThe special UV absorber is also added intoSolarGuard and works to absorb UV energy andrelease it without damaging the polymer chain. This isachieved by absorbing UV energy and emitting the lightat a different wavelength and frequency than that of theelectrons in the carbon-carbon bonds. This prevents thepolymer bonds from breaking apart. This material willalso absorb UV energy more readily than the links of thepolymer chain thus providing increased protection of thepolyester material and increased resistance to thedamaging effects of UV radiation.THE SOLARGUARD DIFFERENCE• Between a 32-and-60 % improvement, compared toother SMC formulations, in its ability to retain gloss andcolor after exposure to concentrated UV light.• Material thickness remains very stable, demonstratingthat the physical properties of SolarGuard are still verymuch intact after rigorous testing.• Excellent chemical resistance in both exposed vaporand total submersion applications.• ASTM flame spread testing meets a NFPA No. 101Class A (I) Flame Spread Index.• Potential toxic emissions have been eliminated orsubstantially reduced from elimination of materials suchas bromine, tin and antimony. Other acid gasses havebeen reduced or eliminated along with significantreductions of black smoke when burned. This newformulation is considered to be non-haloginated.TECHNICALINFORMATION<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com374
A unique SMC system for maximizing polymer chain and crosslink bonding.Up to 60% more UV-resistant compared with other available formulations.Meets UL 94 5V Fire-Retardancy Standards plus NFPA No. 101 Class A Flame Spread Index.Eliminates toxic bromine and antimony.Now available to you at NO additional finished-product cost.TechnicalInformationProof Through PerformancePhysical Properties of SolarGuardMATERIALS TEST METHOD SOLARGUARD POLYESTERTYPICAL PROPERTIES ASTM FIBERGLASS (SMC)Flexural Strength (psi) D 790 17KNotched Izod (ft-lb/in @ 1/8") D256 11Impact Resistance (lb-in) UL 746C ≥216Compressive Strength (psi) D 695 20KTensile Strength (psi) D 638 8KSpecific Gravity D 792 1.71Flammability UL 94 V-0 & V-5Heat Deflection (°F at 264 psi) D 648 375-500Service Temperature Range (°F) -40°F to 266°FK Factor, Thermal Conductivity 1.68(BTU/hr/ft/°F 2 /in)Dielectric Strength (VPM) D 149 380Arc Resistance (sec) D 495 190Water Absorption (% in 24 hr) D 570 0.10-0.25Hardness (Barcol-Rockwell 50-70M-Shore A)BarcolShrinkage in/in Minimum .005Note: <strong>Product</strong> comparison dataresulting from independent,third-party accelerated testingcan be obtained by contacting<strong>Stahlin</strong> <strong>Non</strong>-<strong>Metallic</strong> <strong>Enclosures</strong>.SolarGuard Flame Spread ClassificationPer NFPA No 101 ASTM E162 SurfaceFlammability Of MaterialsCLASS RANGE TYPE SOLARGUARD TEST RESULTSClass A (I) 0 to 25 Flame Spread <strong>Stahlin</strong> SolarGuard flame spread index 20.59Class B (II) 26 to 75 Flame SpreadClass C (III) 76 to 100 Flame SpreadSolarGuard optical Density Test ResultSummary ASTM E662 Specific Optical DensityOf Smoke Generated By Solid MaterialTECHNICALINFORMATIONNON-FLAMINGFLAMINGDs @ 1.5 min. (avg) 0.0 0.3Ds @ 4.0 min. (avg) 0.0 9.9Dm (corr) (avg) 10.8 181.9375<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
SolarGuard Testing ProceduresTesting Procedures Used To Ensure That SolarGuardMeets Or Exceeds All Relative Industry Standards– UL 746 C Polymeric Materials Used InElectrical Equipment Evaluations– UL 50 <strong>Enclosures</strong> For Electrical Equipment– UL 508 Industrial Control Panels.Additional tests have been performed above andbeyond these industry guidelines to aid inproviding the end user with a premium product fora broad range of uses. These tests wereperformed using ASTM standards and othergovernment approved procedures. Test standardsand evaluation criteria are:– Chemical resistance testing (submerged andvapor), 37 various chemicals (acids, bases)– ASTM E162 Flame Spread– ASTM E662 Smoke Density– Particulate dust weight (NIOSH 05000), Acidgases HBr, HCl, HNO3, HPO4, H2SO4(NIOSH 7903), Cyanide (NIOSH 7904),Metals (NIOSH 7<strong>300</strong>), VOC’s with TIC’s (EPATO-14/TO-15), PAH (NIOSH 5506), CarbonMonoxide, Carbon Dioxide, Visual Fiberglass(NIOSH 7400), Ammonia, NO, NO2, HS2.Additional UV testing has been performed underthe following guidelines and evaluation criteria.Exposure testing is performed in Arizona inaccordance with ASTM G90-98, Spray Cycle 1(EMMAQUA, day spray with nighttime wetting).– ASTM G 147-96 Standard Practice forConditioning and Handling of <strong>Non</strong>-<strong>Metallic</strong>Materials for Natural and Artificial WeatheringTest– ASTM G 90-98 Standard Practice forPerforming Accelerated Outdoor Weatheringof <strong>Non</strong>-<strong>Metallic</strong> Materials Using ConcentratedNatural Sunlight– ASTM D 660-93 Method for EvaluatingDegree Checking of Exterior Paints– ASTM D 2244-93 Test Method for Calculationof Color Difference from InstrumentallyMeasured Color Coordinates– ASTM E 308-96 Standard Practice forComputing the Colors of Objects by Using theCIE System– ASTM D1729-96 Practice for Visual Appraisalof Color and Color Difference of Diffusely-Illuminated Opaque Materials– ASTM D 661-93 Method for EvaluatingDegree of Cracking of Exterior Paints– SFTS-1 (Wash)) 92-03-30 Method of CleaningExposed Specimens Prior to Inspection,Method A, Washed With Deionized Water andSoft Sponge– ASTM D 523-89 (1999) Test Method forSpecular Gloss– ASTM D 4214-89 Standard Test Methods forEvaluating the Degree of Chalking of ExteriorPaint Films, Method D, Transparent TapeMethodUV correlation testing has been performed usingaccelerated artificial weathering devices. Testswere performed using a QUV A Fluorescent BulbWeatherometer. The test method utilizes a QUVmachine, which consists of 2 banks of 4fluorescent lights each that emit light in the UV-A(340 nm) wavelength. This UV wavelengthsimulates normal outdoor sunlight. The secondpart of the test utilizes water vapor to simulaterain/fog. The exposure cycle consist of alternating4 hours of UV-A at 65 degree C and 4 hours of100% relative humidity at 50 degree C. Testing isin accordance with ASTM G154 specifications.TECHNICALINFORMATION<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com376
GlossaryIndustry Acronyms and Enclosure TermsGlossaryANCE National Standardization andCertification of the Electrical Sector AssociationCol. Fuentes de Tecamachalco Naucalpan deJuarez C.P. 53950, Edo. de Mexico ANCE performsstandards functions in Mexico which aresimilar to those of ANSI in the United States andCSA in Canada.ANSI American National Standards Institute1430 Broadway New York, NY 10018Arc ResistanceMeasures electrical-breakdown conditions. Arcresistance is measured as time, in seconds that ittakes for an electrical current to arc across a distancealong the insulating surface. The higher thevalue, the greater the resistance to break down.ASTM American Society for Testing andMaterials 100 Barr Harbor Drive Conshohocken,PA 19428Attenuation A measure of the ability to containor repel EMI/RFI energy.Bonding Establishing a low impedance conductingpath between conductors in an electricalsystem.BTU British Thermal Unit. A measure of theamount of heat required to raise the temperatureof 1 lb. of water 1°F. This unit is commonly usedto rate air conditioning capacity.CANENA Council for Harmonization ofElectrotechnical Standardization of NorthAmerica, harmonizes standards among Canada,Mexico and the United States.Compression Set A physical property of gasketmaterials, the difference between the initialheight of a never compressed gasket and thesame gasket after being compressed for a giventime period divided by the original height andexpressed as a percentage. A lower number isdesirable.Compressive StrengthDescribes how much weight a non-moving,specified size and shape a material can withstandbefore crushed. Compressive strength ismeasured in thousands of pounds per squareinch. Higher numbers indicate stronger materials.Conduction 1. Electrical — The flow of electricalcurrent in a material. 2. Thermal — Thetransfer of kinetic energy from one molecule toanother as heat flows from a hot area to a coldarea.Continuity A low impedance conducting pathbetween conductors in an electrical system.Convection The transfer of heat by mixingfluids, either naturally or forced as by a fan or airconditioning.Cover The unhinged portion of an enclosurethat closes an opening.CSA Canadian Standards Association 178Rexdale Boulevard Etobicoke, Ontario CanadaM9W 1R3Composite The combination of reinforcingfibers, usually glass or carbon, and a polymerresin. The fiber reinforcement provides physicalproperties which exceed the resin alone.GLOSSARY377<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Industry Acronyms and Enclosure TermsdB (decibel) Unit to express the effectivenessof a material or system in reducing electromagneticinterference. If an enclosure reduces the EMIby 30 dB, the power of the interfering wave will bereduced by a factor of 1000 in passing throughthe enclosure. The equation for calculating attenuationin decibels is dB = 10 log 10 (P 1 /P 2 ) whereP 1 = power of the interference wave before itpasses through the enclosure, P 2 = power of thewave after it has been reduced (attenuated) bythe enclosure.Deflection Temperature Under Load(DTUL)Measure the temperature at which a materialdeflects a given amount under a given load. It wasdeveloped for thermoplastic materials which softenconsiderably when heated. It has a relativelylittle value as a design figure for reinforced thermosettingpolymers.DensityIs the weight of a materials per unit volume. It ismeasured in pounds per cubic foot (lbs./cu. Ft).Higher numbers indicate heavier materials.Design Test Tests to confirm performance of aproduct designed to an applicable standard, notintended to be a production test.Dielectric StrengthIs an indication of the electrical strength of amaterial as an insulator. The specimen is placedbetween heavy cylindrical brass electrodes thatcarry electrical current. For short-term tests, thevoltage is increased from zero to breakdown at auniform rate. Breakdown by these tests meanspassage of sudden excessive current through thespecimen; it can be verified by instruments andvisible damage. The dielectric strength of an insulatingmaterial is the voltage gradient at whichelectric failure or breakdown occurs. The dielectricstrengths of materials vary greatly with severalconditions such as humidity and geometry. Is isnot possible to apply the standard test valuesdirectly to field use unless all condition, includingspecimen dimension, are the same. Because ofthis, the dielectric-strength test results are of relativerather that absolute value as specificationguides.Door The hinged portion of an enclosure thatcloses an opening.Electromagnetic Emission Electrical energyradiated into the environment intentionally byan antenna or incidentally by an electronic componentor power equipment during a switching operation.Electromagnetic Field Invisible fields whichsurround energized conductors such as wires andantennas. A field has both electric and magneticcomponents.Electromagnetic Immunity The capabilityof an electronic component or electrical equipmentto perform its intended function in the presenceof external electromagnetic fields.EMI ElectroMagnetic Interference. Randomlyradiated electrical energy which varies in frequencyand intensity and is coupled to electronic systemswith undesirable results. Sources includepower lines, high voltage equipment, switches,relays or any device that generates an electricspark or corona.EMC ElectroMagnetic Compatibility. The abilityof electronic equipment to perform its intendedfunction in the presence of EMI and RFI disturbanceswithout affecting proper operation.EMP ElectroMagnetic Pulse. Interferencecaused by a large and sudden electrical dischargesuch as lightning.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com378GLOSSARY
GlossaryIndustry Acronyms and Enclosure TermsGlossaryEnclosure A surrounding case constructed toprovide a degree of protection to personnelagainst incidental contact with the enclosedequipment and to provide a degree of protectionto the enclosed equipment. Enclosure Type definitionsdescribe the application and the environmentalconditions for which an enclosure will provideprotection.EUEuropean UnionFlammability 94V-0 is a rating which is usedto establish the flammability of enclosure materials.It is performed by exposing a specimen ofthe material in a vertical position to a flame anddetermining if it burns and for how long it continuesto burn after the flame is removed.Flexural StrengthAlso known as bending strength. It describeshow much of a non-moving weight can beapplied before a materials yields or breaks. It ismeasured in thousands of pounds per squareinch. Higher numbers mean the material isstronger and can withstand a heavier load.Grounding Intentionally establishing a lowimpedance current path between conductingmaterials at the same potential, not necessarilyenergized, of an electrical system and the earthat zero potential. Grounds are extremely criticalto protect equipment and personnel from electricalshock.Hazardous Area Area where electrical equipmentis installed and ignitable flammable gasesand vapors; flammable and combustible liquids;combustible dusts or ignitable fibers and flyingsare or could be present. See National ElectricalCode, Articles 501-505 and 511-517.Heat Deflection Temperature The temperatureat which a composite specimen beginsto deflect when exposed to a prescribed load.Heat Distortion Temperature See HeatDeflection Temperature, both terms are used.hz, hertz The measure of frequency, definedas one cycle/sec.IEC -International Electrotechnical Commission1 Rue de Varembei CH-1211 Geneva 20,SwitzerlandIndoor Locations Areas which are protectedfrom exposure to the weather.Impact Strength –IZODA measure of how much energy is absorbed bythe material when it is broken by a movingweight. There area many different test methodsfor measuring impact. IZOD is but one of thesemethods. IZOD is measured in foot pounds perinch of width. (This is sometimes given as footpounds per inch of notch.) Higher numbers meanthat the materials will absorb more energy beforeit is broken by a moving weight.K Factor A measure of the effectiveness of amaterial as a thermal insulator. It represents thequantity of heat which can pass through onesquare foot of material in one hour for everydegree Fahrenheit of temperature differenceacross one inch of material thickness.Mhz, Megahertz A measure of frequency,defined as one million cycles/sec.Mold ShrinkageIs the difference in dimensions between the coldmold and cold part.NEC National Electric Code, an NFPA document.NEMA National Electrical ManufacturersAssociation 1<strong>300</strong> North 17th St, Suite 1847Rosslyn, VA 22209NFPA National Fire Protection Association 1Batterymarch Park P.O. Box 9101 Quincy, MA02269-9101GLOSSARY379<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Industry Acronyms and Enclosure Terms<strong>Non</strong>-hazardous Areas Area where electricalequipment is installed and ignitable flammablegases and vapors; flammable and combustibleliquids; combustible dusts or ignitable fibers andflyings are not present. See NEC Articles 501-501 and 511-517 as well as the above definitionof Hazardous Areas.<strong>Non</strong>-ventilated Constructed so as to provideno intentional circulation of external air throughthe enclosure.Ohms per Square A measurement unit forelectrical continuity of the metal coating appliedinternally to fiberglass enclosures for EMI/RFIshielding. The surface resistance (conductivity)measurement is without units because the surfaceareas does not influence the reading, i.e.,measurements will yield the same result over 1in2, 1 cm2 or 1 m2.Outdoor Locations Areas which areexposed to the weather.Relative PermittivityIs the ration of the capacitance of a particularmaterial to the capacitance of air. The relativepermittivity of most insulating materials variesfrom 2 to 10, air having 1. Higher values indicategreater insulating qualities.RFI Radio Frequency Interference.Interference caused by radio waves whichemanate from commercial radio and televisionstations, amateur radio broadcasts, radar,microwave ovens, etc. Radio waves are usuallywell defined in terms of amplitude and frequency.Seamless Gasket The polymer gasketwhich is automatically dispensed and chemicallyreacts to form a gasket which has no seams.SMC Sheet Molding Compound. The fiberglass-polyestermaterial used to mold <strong>Stahlin</strong><strong>Enclosures</strong>. The compression molding processused to make <strong>Stahlin</strong> fiberglass enclosures.Specific GravityIs the ration of the density of a material to thedensity of water. Is can be obtained by dividing amaterial’s density in lbs/ft to the 3rd power by62.36.Specific Heat(Thermal Capacity) Defines how much heat isneeded to raise the temperature of one pound ofmaterial one degree F. It is measured in BTUsper pound per degree Fahrenheit (BTU/lb/~).Higher numbers mean that it takes more heatenergy to raise the temperature of a material.Strip Gasket The neoprene material which iscut in strips and attached to the enclosure withan adhesive.Temperature Rise The temperature differencebetween air inside the enclosure and theambient air outside the enclosure.Tensile ElongationWhen a specified size and shape bar of a materialis pulled, it gets longer. Elongation tells howmuch longer it gets before it breaks.Tensile ModulusMeasure of the ability of a material to withstandload without permanent deformation. It is normallymeasured as the slope of a the straight lineportion of a plot of stress vs. strain. Is is measuredin millions of pounds per square inch.Tensile StrengthDescribes how much of a non-moving load amaterial can withstand before it no longer returns0 its original length upon removal of the load.Tensile strength is measured in thousands ofpounds per square inch. Higher numbers indicatematerials which can withstand a stronger pullbefore failure.<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com380GLOSSARY
GlossaryIndustry Acronyms and Enclosure TermsGlossaryThermal Coefficient of ExpansionMeasure show much the length of a material willchange when the material is heated or cooled.The value given is based on the inch as a unit.The number given shows how much this materialswill increase in length if the temperature ofthe material is raised one degree Fahrenheit(in/in/˚F). Higher numbers mean that the materialwill expand or lengthen more for each degreerise in temperature. Smaller numbers indicate relativestability to change no matter what temperature.Thermal ConductivityKnown as the K factor. It measure the transfer ofheat from one side of a material to the other side.It is measured as BTUs per hour per unit area(square feet) for a thickness of one inch and atemperature difference of one degree Fahrenheitbetween both sides of the material in the sameamount of time.UV Ultraviolet Light. The component of sunlight above the visible spectrum that affects polymermaterials in long term exposures.Ventilated Constructed so as to provide forthe circulation of external air through the enclosureto remove excess heat, fumes, or vapors.Volume ResistivityIs the electrical resistance between oppositeaces of a unit cube (1 cm to the 3rd power) of agiven material. This resistance is expressed inohms. Higher values indicate greater insulatingqualities.Water Absorption A physical property ofmaterials. A specimen of the material isweighed, placed in water for 24 hours andreweighed. The difference between the initialweight and the weight after water exposure isexpressed as a percentage.Thermal Radiation The transfer of energyby electromagnetic waves.Thermoplastic A polymer which becomessolid when the temperature falls below its meltingpoint. A thermoplastic polymer, once cured, canbe reheated, melted and shaped into somethingelse.Thermoset A polymer which is cured at agiven temperature, an irreversible chemical reaction.A thermoset polymer, once cured, cannotbe heated again and shaped into something else.ULULCUnderwriters Laboratories333 Pfingsten RoadNorthbrook, IL 60062Underwriters Laboratories of Canada7 Crouse RoadScarborough, OntarioCanada M1R 3A9GLOSSARY381<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
<strong>Stahlin</strong> <strong>Enclosures</strong> <strong>Catalog</strong> Part Number IndexPrefix Family . . . . . . . .SuffixPage No.Prefix Family . . . . . . . .SuffixPage No.DiamondShield Series 11 - 24DS60604 thru 201610 . . . . . . . .W 15 - 16DS60604 thru 201610 . . . . . . . .HW 17 - 18DS60604 thru 201610 . . . . . . . .HLL 19 - 20DS60604 thru 201610 . . . . . . . .HPL 21 - 22DS60604 thru 201610 . . . . . . . .FHL 23 - 24DiamondShield Window Series 25 - 36DSW60604 thru 201610 . . . . . .W 27 - 28DSW60604 thru 201610 . . . . . .HW 29 - 30DSW60604 thru 201610 . . . . . .HLL 31 - 32DSW60604 thru 201610 . . . . . .HPL 33 - 34DSW60604 thru 201610 . . . . . .FHL 35 - 36DiamondShield Clear Cover Series 37 - 48DCC60604 thru 16148 . . . . . . .W 39 - 40DCC60604 thru 16148 . . . . . . .HW 41 - 42DCC60604 thru 16148 . . . . . . .HLL 43 - 44DCC60604 thru 16148 . . . . . . .HPL 45 - 46DCC60604 thru 16148 . . . . . . .FHL 47 - 48DiamondShield Panels 49- 58BP66 thru 2016 . . . . . . . . . . . . .AL,CS,SS,FG 49 - 50P806 thru 2016 . . . . . . . . . . . . .ASAL 50CP606 thru 2016 . . . . . . . . . . . .AL 55P806 thru 2016 . . . . . . . . . . . . .SWAL 56P606 thru 2016 . . . . . . . . . . . . .STAL 57DIamondShield Panel Kits 54-58Panel and Accessory Combination Kits, Includes PanelPanel Accessory Kits, Panel NOT IncludedOther Accessory KitsClassic Series 59 - 82CL707 thru 1513 . . . . . . . . . . . .W 65 - 66CL707 thru 1513 . . . . . . . . . . . .HW 67 - 68CL707 thru 1513 . . . . . . . . . . . .HL 69 - 70CL707 thru 1513 . . . . . . . . . . . .HLL 71 - 72CL707 thru 1513 . . . . . . . . . . . .HPL 73 - 74CL707 thru 1513 . . . . . . . . . . . .HSW 75 - 76CL707 thru 1513 . . . . . . . . . . . .HSL 77 - 78CL707 thru 1513 . . . . . . . . . . . .HSLL 79 - 80CL707 thru 1513 . . . . . . . . . . . .HSPL 81 - 82Classic Window Series 83 - 106CLW707 thru 1513 . . . . . . . . . .W 89 - 90CLW707 thru 1513 . . . . . . . . . .HW 91 - 92CLW707 thru 1513 . . . . . . . . . .HL 93 - 94CLW707 thru 1513 . . . . . . . . . .HLL 95 - 96CLW707 thru 1513 . . . . . . . . . .HPL 97 - 98CLW707 thru 1513 . . . . . . . . . .HSW 99 - 100CLW707 thru 1513 . . . . . . . . . .HSL 101 - 102CLW707 thru 1513 . . . . . . . . . .HSLL 103 - 104CLW707 thru 1513 . . . . . . . . . .HSPL 105 - 106J Series 107 - 126J604 thru 20168 . . . . . . . . . . . .W 113 - 114J604 thru 20168 . . . . . . . . . . . .HW 115 - 116J604 thru 20168 . . . . . . . . . . . .HLL 117 - 118J604 thru 20168 . . . . . . . . . . . .HPL 119 - 120J604 thru 20168 . . . . . . . . . . . .FHW 121 - 122J604 thru 20168 . . . . . . . . . . . .FHLL 123 - 124J604 thru 20168 . . . . . . . . . . . .FHPL 125 - 126Continued on the folliowing pages...<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com382GLOSSARY
<strong>Catalog</strong> Part Number IndexIndexPrefix Family Suffix Page No.Prefix Family Suffix Page No.J Series w/ Window 127 - 146JW604 thru 20168 . . . . . . . . . . .W 133 - 134JW604 thru 20168 . . . . . . . . . . .HW 135 - 136JW604 thru 20168 . . . . . . . . . . .HLL 137 138JW604 thru 20168 . . . . . . . . . . .HPL 139 - 140JW604 thru 20168 . . . . . . . . . . .FHW 141 - 142JW604 thru 20168 . . . . . . . . . . .FHLL 143 - 144JW604 thru 20168 . . . . . . . . . . .FHPL 145 - 146J Clear Cover Series 147 - 166JCC808 thru 1212 . . . . . . . . . . .W 153 - 154JCC808 thru 1212 . . . . . . . . . . .HW 155 - 156JCC808 thru 1212 . . . . . . . . . . .HLL 157 - 158JCC808 thru 1212 . . . . . . . . . . .HPL 159 - 160JCC808 thru 1212 . . . . . . . . . . .FHW 161 - 162JCC808 thru 1212 . . . . . . . . . . .FHLL 163 - 164JCC808 thru 1212 . . . . . . . . . . .FHPL 165 - 166RJ Raised Cover Series 167 - 186RJ604 thru 201610 . . . . . . . . . .W 173 - 174RJ604 thru 201610 . . . . . . . . . .HW 175 - 176RJ604 thru 201610 . . . . . . . . . .HLL 177 - 178RJ604 thru 201610 . . . . . . . . . .HPL 179 - 180RJ604 thru 201610 . . . . . . . . . .FHW 181 - 182RJ604 thru 201610 . . . . . . . . . .FHLL 183 - 184RJ604 thru 201610 . . . . . . . . . .FHPL 185 - 186RJ Raised Cover w/ Window 187 - 206RJW604 thru 201610 . . . . . . . .W 193 - 194RJW604 thru 201610 . . . . . . . .HW 195 - 196RJW604 thru 201610 . . . . . . . .HLL 197 - 198RJW604 thru 201610 . . . . . . . .HPL 199 - 200RJW604 thru 201610 . . . . . . . .FHW 201 - 202RJW604 thru 201610 . . . . . . . .FHLL 203 - 204RJW604 thru 201610 . . . . . . . .FHPL 205 - 206FatBoy SSH Series 207 - 210J6048 thru 201617 . . . . . . . . . .SSH 207 - 208JW606 thru 201617 . . . . . . . . . .SSH 209 - 210Telecontrol Series 211 - 212J1407 . . . . . . . . . . . . . . . . . . . . .HPL 211J1407 . . . . . . . . . . . . . . . . . . . . .TC 212Small Junction Series 223 - 230CF332 thru 1732 . . . . . . . . . . . .<strong>Non</strong>e 227 - 228F763 thru 963 . . . . . . . . . . . . . .<strong>Non</strong>e 229 - 230DuraBoxx 213 - 222D554 thru 16165 . . . . . . . . . . . .W 215 - 218DL18127 thru 24168 . . . . . . . . .W 219 - 222NewSentry 231 - 236J442 thru 12126 . . . . . . . . . . . .PVC 236PushButton Series 237 - 246CF1PB thru 7PB . . . . . . . . . . . .<strong>Non</strong>e 241 - 242CF1PB thru 7PB . . . . . . . . . . . .-22 243 - 244F4PBW thru 25PBW . . . . . . . . .<strong>Non</strong>e 245 - 246N Series 247 - 268N1610 thru 3636 . . . . . . . . . . . .no suffix 265 - 268N1610 thru 3636 . . . . . . . . . . . .RT 271 - 274N1610 thru 3636 . . . . . . . . . . . .WT 251 - 254N1610 thru 3636 . . . . . . . . . . . .HWT 255 - 258N1610 thru 3636 . . . . . . . . . . . .FHLWT 259 - 262N1610 thru 3636 . . . . . . . . . . . .FHLRT 275 - 278INDEX383<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
<strong>Stahlin</strong> <strong>Enclosures</strong> <strong>Catalog</strong> Part Number IndexPrefix Family . . . . . . . .SuffixPage No.Prefix Family . . . . . . . .SuffixPage No.Control Tower4836 thru 9072 . . . . . . . . . . . . .No Suffix 2804836 thru 9072 . . . . . . . . . . . . .WT 2814836 thru 9072 . . . . . . . . . . . . .HWT 2814836 thru 9072 . . . . . . . . . . . . .FHLWT 2814836 thru 9072 . . . . . . . . . . . . .RT 2814836 thru 9072 . . . . . . . . . . . . .FHLRT 2814836 thru 9072 . . . . . . . . . . . . .FS 2804836 thru 9072 . . . . . . . . . . . . .FSWT 2804836 thru 9072 . . . . . . . . . . . . .FSHWT 2804836 thru 9072 . . . . . . . . . . . . .FSFHWT 2804836 thru 9072 . . . . . . . . . . . . .FSRT 2804836 thru 9072 . . . . . . . . . . . . .FSFHLRT 2804836 thru 9072 . . . . . . . . . . . . .DD 2824836 thru 9072 . . . . . . . . . . . . .DDWT 2824836 thru 9072 . . . . . . . . . . . . .DDHWT 2824836 thru 9072 . . . . . . . . . . . . .DDFHLWT 2824836 thru 9072 . . . . . . . . . . . . .DDRT 2824836 thru 9072 . . . . . . . . . . . . .DDFHLRT 2824836 thru 9072 . . . . . . . . . . . . .FSDD 283 - 2844836 thru 9072 . . . . . . . . . . . . .FSDDWT 283 - 2844836 thru 9072 . . . . . . . . . . . . .FSDDHWT 283 - 2844836 thru 9072 . . . . . . . . . . . . .FSDDFHLWT 283 - 2844836 thru 9072 . . . . . . . . . . . . .FSDDRT 283 - 2844836 thru 9072 . . . . . . . . . . . . .FSDDFHLRT 283 - 284Disconnect Series - Enclosure Only 289 - 299C1610 thru 3630 . . . . . . . . . . . .<strong>Non</strong>e 293 - 294Disconnect Series With SwitchC1610 thru 3024 . . . . . . . . . . . .SND 295 - 296C1610 thru 3024 . . . . . . . . . . . .SFD 295 - 296C1610 thru 2412 . . . . . . . . . . . .AND 297 - 298C1610 thru 2412 . . . . . . . . . . . .AFD 297 - 298C2412 thru 3024 . . . . . . . . . . . .GND 299 - <strong>300</strong>C2412 thru 3024 GFD 299 - <strong>300</strong>Disconnect Circuit Breaker 301 - 305C2412 . . . . . . . . . . . . . . . . . . . .SCB 301 - 305C2412 . . . . . . . . . . . . . . . . . . . .WCB 301 - 305C2412 . . . . . . . . . . . . . . . . . . . .GCB 301 - 305Fiberglass Wireway and Trough 309 - 314WW . . . . . . . . . . . . . . . . . . . . . .<strong>Non</strong>e 311FT . . . . . . . . . . . . . . . . . . . . . . .<strong>Non</strong>e 313General Accessories 323 - 331Back Panels 329 - 331PluggIt 338Dual Access 285 - 288ND2016 thru 3630 . . . . . . . . . . .No SuffixND2016 thru 3630 . . . . . . . . . . .FSND2016 thru 3630 . . . . . . . . . . .RMBreather & Drain Vents 323Other Accessories 323 - 340<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com384INDEX
Notes385<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com386
Notes387<strong>Stahlin</strong> <strong>Enclosures</strong> • 500 Maple Street, Belding, MI 48809 • Phone: 616-794-0700 • Fax: 616-794-3378 • www.stahlin.com
Change language