Miller Fall Protection Catalog V2.0 - Wesco Industries Ltd.

26 Roofing Fall Protection ProductsMiller ® RoofStrider SystemsRoofStrider SystemRoofStrider II SystemInstalls onvariable pitchwood roofsNewThe RoofStrider System is designedto offer continuous fall protectionfor workers on variable pitch woodroofs. It installs on roof peaks oron flat sides, and over most ridgevents, studs, joists, etc.Kit Includes:• RoofStrider System (roof mountingassembly, MightyLite Self-RetractingLifeline with rotating bracketand hardware)• DuraFlex E850 Harness• Durable Carrying Bag• Instructional VideoThe RoofStrider II System is designedfor use on standing seam metal roofsand metal decking. The adjustableclamping feet tighten to standing seamsfrom 24" (610mm) to 32" (812mm)apart on metal roofs (24 gauge orgreater) to provide convenient anddependable fall protection. Optionalscrew-on feet may be ordered forattaching to metal decking.Kit Includes:• RoofStrider II System (roof mountingassembly with clamping feet, MightyLiteSelf-Retracting Lifeline with rotatingbracket and hardware)Features for RoofStrider and RoofStrider II SystemsMaximum Mobility• Swivel 360° providing constant protection without sacrificingworker maneuverability•Accommodates varying length MightyLite Self-Retracting Lifelines (SRL’s)Greater Versatility• Install on sloped or flat roof surfaces• Systems designed for wood roofs, metal roofs and metal deckingUniquely designedfor attachment tosloped or flat metal roofsand metal deckingSuperior Performance• MightyLite SRL’s require no annual factory recertification* increasing productivity• MightyLite SRL’s arrest free falls within 24 inches (610mm) while energy-absorbinglegs reduce fall forcesSimple Installation•Minimal tools required • Designed to not damage roof • Easily moved from job to jobMeets OSHA 1926.500 subpart M construction fall protection regulationand ANSI A10.14*Does not apply to Canada due to CSA Z259.2.2-98 requirements. Must be inspected by a Dalloz Fall Protectionauthorized service center if involved in a fall, or if fails user visual or function inspection.RoofStrider IISystem Options:SRMF-1Clamping feet with hardware.Included with the RoofStriderII System. May be orderedseparately and attached to anexisting RoofStrider System.SRMF-2Screw-on feet with metalpiercing hardware formetal decking or flat roofapplications. Must be orderedseparately. Not included withthe RoofStrider II System.