VURSA SERIES SHOWER STALL - Oasis Bath

VURSA SERIES SHOWER STALL®60-INCH MODELSH-6036 (single seat)Rough-In Dimensions60” wide x 37-1/4” deep x 76-3/4” high (w/ 4-inch dam)Finished Dimensions60” wide x 36” deep x 75-1/2” high (w/ 4-inch dam)Unit Featuresl One - Piece Fiberglass Composite Constructionl Sanitary Grade Polyester Gelcoat Surfacel 3-3/8” Dia. Center Drain (see following pages)l Elevated Corner Accessory Towerl Generous, Multi-Level Back Wall Shelvingl Single, Ergonomic Seatl Ergonomic Corner Foot Rest For Shavingl Flat Wall Design To Accommodate Grab Bar Applicationsl Center, Lower Accessory Shelf With Wash Cloth Rodl Low Profile Dam (standard)l Textured Floor Patternl Balsa Wood Core Floor StructureSpecial Notesl Optional ABF Model (provides 3 Inches of drain clearance)l Factory Applied Reinforcement Packages Available (see following pages)l Factory Applied Bar Packages Available (see following pages)77

®SHOWER STALLOrder No.: SH-6036RS (RH seat / 4” dam)SH-6036LS (LH seat / 4” dam)SH-6036RS ABF (RH seat / 6” dam)SH-6036LS ABF (LH seat / 6” dam)60” x 36”, one-piece gelcoated fiberglass shower stall with a single right hand or left hand contoured corner seat, 4” low profile dam(1” drain clearance), multi-level shelves, corner accessory ledge, wall surround, and center drain.NOTE: ABF unit provides 3” drain clearance.SH-6036RS (illustrated)Std Unit ABF UnitA 76-3/4” 78-3/4”B 75-1/2” 77-1/2”C 4” 6”D 1” 3”E - -F - -AccessoryLedge3-3/8” Dia.Drain30” 30”1-5/8” 56-3/4”60”ContouredSeat21-1/4”16”17-1/4”18-3/4”1-5/8”36”1-1/4”37-1/4”Enclosure Size:56-3/4”w (max) x 71-1/2”h (max)Seat Wall1-1/4”Back Wall1-1/4”1-1/4”Control Wall19-1/2”StyleLineShelfShelfShelfShelf71-1/2”AccessoryLedgesAccessoryLedgeA15-3/4”AccessoryLedgesWash ClothRod55”ControlAreaContouredSeat52”36-1/4”ToeHoldContouredSeatB18-1/2”SeatToeHoldD Drain ClearanceC Dam78

®Package Order No.:FH (Fair Housing wall reinforcement)®Package Reinforced Includes: for compliance Factory with applied, HUDDimension TolerancesHUD-FHA compliant (Fair Housing), structurally reinforced wall areas (as shown)+ 0 / -3/8-inchfor the“Fair Housing Design Manual”independent field application of bars.with sidewall bar blockingVursa SeriesModel: Model: SH-6036RS / FH(Fair Base Housing) Model(12/5/2008)(6/16/11)36” 1-1/4”Control Wall1-1/4”60”Back Wall1-1/4”Head End WallShelfAccessoryLedgeShelfAccessoryLedgeShelf37-1/2“ControlAreaShelf42” w x 10” hReinforcement26” w x 10” hReinforcementAccessoryLedgeContouredSeat38” (std)40” (ABF)4” Dam(std. model)6” Dam(ABF model)ToeHoldPackage Order No.:3SM (3-side, mid-level wall reinforcement)®Package Includes: Factory applied, 3-side, mid-level, structurally reinforced wall areas (as shown), exceeding Dimension ‘Fair Housing’Tolerances+ 0 / -3/8-inch(HUD/FHA) requirements.NOTE: Factory installed bar packages available using 3SM reinforcement.Vursa SeriesModel: SH-6036RS3SM (3-Side Base Model Mid Level)(12/5/2008)(6/16/11)36” 1-1/4”Control Wall1-1/4”60”Back Wall1-1/4”Head End Wall5-1/2“5-1/2“ShelfAccessoryLedge8” w x 32”hReinforcementShelf20” w x 16” hReinforcementAccessoryLedge16” w x 8” hReinforcementShelf8” w x 32”hReinforcementControlAreaShelfContouredSeat24” w x 16” hReinforcement38” (std)40” (ABF)42” w x 18” hReinforcement24” w x 16” hReinforcement4” Dam(std. model)6” Dam(ABF model)38” (std)40” (ABF)26” w x 34” hReinforcementAccessoryLedgeToeHold79

®Package Order No.:3SF (3-side, full-wall reinforcement)®Package Includes: Factory applied, 3-side, full-wrap, structurally reinforced wall areas (as shown), exceedingDimension‘Fair Housing’Tolerances+ 0 / -3/8-inch(HUD/FHA) requirements, for the independent field application of bars.NOTE: Factory installed bar packages available using 3SF reinforcement.Vursa SeriesModel: SH-6036RS3SF (3-Side Base Model Full Wrap)(12/5/2008)(6/16/11)36” 1-1/4”Control Wall1-1/4”60”Back Wall1-1/4”Head End Wall6“ 12” w x 24 ” h5-1/2“Reinforcement6“5-1/2“ShelfAccessoryLedge32” w x 20” hReinforcement24” w x 26” hReinforcementShelf18” w x 14” hReinforcement20” w x 16” hReinforcementAccessoryLedge42” w x 18” hReinforcement18” w x 20 ” hReinforcement16” w x 8” hReinforcementShelf28” w x 16”hReinforcement32” w x 14”hReinforcement18” Control w x 12”hArea ControlArea24” w x 36” hReinforcementShelfAccessoryLedgeContouredSeat24” w x 16” hReinforcement4” Dam(std. model)6” Dam(ABF model)ToeHoldPackage Order No.:Upgrade Package No.:BP1-60 (1-1/2” dia., stainless steel, 2-bar only package)BP1-60 WHT (1-1/4” dia., white powder coat, 2-bar only package)BP1-60 OFW (1-1/4” dia., off-white powder coat, 2-bar only package)BP1-60 SNK (1-1/4” dia., satin nickel, 2-bar only package)Dimension Tolerances+ 0 / -3/8-inchPackage Includes: Factory installed, 1-1/2” dia. stainless steel, 2-bar package with basic reinforcement for componentsVursa Series(as shown).NOTE: Enhanced reinforcement available, see 3SM & 3SF packages.Model: SH-6036RS/ Base BP1-60 Model Pkg.(12/5/2008)(6/2/11)®36” 1-1/4”Control Wall1-1/4”60”Back Wall1-1/4”Head End WallShelfAccessoryLedgeShelfAccessoryLedgeShelfControlAreaShelf28-1/2” Bar6”20” BarAccessoryLedgeContouredSeat4” Dam(std. model)6” Dam(ABF model)29”ToeHold80

®Package Order No.:Upgrade Package No.:BP2-60 (3-bar only package)BP2-60 WHT (1-1/4” dia., white powder coat, 3-bar only package)BP2-60 OFW (1-1/4” dia., off-white powder coat, 3-bar only package)BP2-60 SNK (1-1/4” dia., satin nickel, 3-bar only package)Dimension Tolerances+ 0 / -3/8-inchVursa SeriesPackage Includes: Factory installed, 1-1/2” dia. stainless steel, 3-bar package with basic reinforcement for components (as shown).NOTE: Enhanced reinforcement available, see 3SM & 3SF packages.Model: SH-6036RS/ Base BP2-60 Model Pkg.(12/5/2008)(6/8/11)®36” 1-1/4”Control Wall1-1/4”60”Back Wall1-1/4”Head End WallShelfAccessoryLedgeShelf24” BarAccessoryLedgeShelf24” Bar6”ControlAreaShelf28-1/2” Bar4”6”20” BarAccessoryLedgeContouredSeat4” Dam(std. model)6” Dam(ABF model)29”ToeHoldPhotographic images may include optional components and appear different than actual product.Dimensions shown are maximum. Due to the nature of the materials involved, actual unit dimensions can vary (tolerances: +0 / -3/8 inch).Oasis reserves the right to modify or discontinue product and/or associated equipment without prior written or verbal notification or obligation.SPSH-027.03 / 100111 81