MicroCen ® 16 Small Microliter Centrifuge - Daintree Scientific

GmbHSpecification MicroCen ® 16 MicroCen ® 16Catalog No. (50/60 Hz, 1 phase) 21 16 000LaborgeräteMicroCen ®16VoltageMaximum Capacity220 – 240 V24 x 2.2 mlMaximum Speed (rpm) 14,800Max. g-Force (depending on rotor) in x g 16,163Minimum Speed (rpm) 200Information DisplayPreset TimeDrive SystemAcceleration and DecelerationLarge LCD display10 sec. up to 99 min. 59 sec., short run and continuous run possibleMaintenance-free brushless induction drive motorShort acceleration and deceleration times, Softstart/Softstop possibleShortest acceleration time 13 sec. (rotor 21 16 300) / 14 sec. (rotor 21 16 200)Shortest deceleration time 11 sec. (rotor 21 16 300) / 12 sec. (rotor 21 16 200)Lid LockTemperature increase during runMax. kinetic energy1,721 NmPower consumption95 WNoise level at max. speed< 60 dBInterference suppression EN 61326Dimensions (W x D x H): in cm(in inches)Shipping dimensions in cm(in inches)Automatic motorized lid opening, emergency opening of lidMax. 9°/13°C (rotor 21 16 300) / Max. 10°C/11.1°C (rotor 21 16 200)After 20 min. continuous run21.2 x 26.6 x 17.6(8.3 x 10.5 x 6.9)31.0 x 33.0 x 38.0(12.2 x 13.0 x 15.0)Net weight in kg (lbs.) 6.2 (13.7)Gross Weight in kg (lbs.) 7.6 (16.8)SMALL MICROLITER CENTRIFUGEAll products built by Herolab carry the CE sign. Herolab has its own Quality Management System which is conform to ISO 9001.Herolab GmbH LaborgeräteLudwig-Wagner-Str. 1269168 WieslochGERMANYpage 3 of 522001100- -0011

GmbHLaborgeräteMicroCen ®16Fixed Angle Rotors:Cat. No.MaterialImageMax. CapacityMax. SpeedMax. g-forceIncludedExtrasAccessories(Tubes/Adapters)21 16 300Polypropylene12 x 1.5/2.2 ml14,800 rpm15,183 x gPolysulfone lid(21 16 900)see page 521 16 32021 16 25021 16 26021 16 20021 16 220AluminumPolypropyleneAluminumPolypropyleneAluminumPlease note that the rotors made ofpolypropylene can be autoclaved only approx.20 times for 10-15 min. at 121°C.Aluminum rotors areautoclavable any number of times.Microhematocrit Rotor:12 x 1.5/2.2 ml18 x 1.5/2.2 mlresp.18 x 0.25/0.4 ml(2 rows)18 x 1.5/2.2 mlresp.18 x 0.25/0.4 ml(2 rows)24 x 1.5/2.2 ml24 x 1.5/2.2 ml14,800 rpm15,183 x g14,800 rpm14,448 x gresp.15,673 x g14,800 rpm14,448 x gresp.15,673 x g14,800 rpm16,163 x g14,800 rpm16,163 x gPolysulfone lid(21 16 900)Polysulfone lid(21 16 900)Polysulfone lid(21 16 900)Polysulfone lid(21 16 900)Polysulfone lid(21 16 900)see page 5see page 5see page 5see page 5see page 5SMALL MICROLITER CENTRIFUGECat. No. Image Max. CapacityMax. SpeedMax. g-forceIncluded ExtrasAccessories21 16 40024 capillaries 35 µl(Ø 1.4 x 50 mm)13,000 rpm11,903 x gReader card (21 16 925)Rotor lidseepage 5All products built by Herolab carry the CE sign. Herolab has its own Quality Management System which is conform to ISO 9001.Herolab GmbH LaborgeräteLudwig-Wagner-Str. 1269168 WieslochGERMANYpage 4 of 522001100- -0011

GmbHLaborgeräteAvailable Herolab Tubes and Adapters for MicroCen ® 16 Rotors:Accessories for Fixed Angle Rotors:Cat. No. Reaction Vials Suitable for rotor:21 16 804 0.4 ml21 16 250 and 21 16 260 (directly)all fixed angle rotors (with adapter 21 16 212)Piecesper pack21 16 805 0.5 ml all fixed angle rotors (with adapter 21 16 211) 10021 16 815 1.5 ml all fixed angle rotors (directly) 10021 16 822 2.2 ml all fixed angle rotors (directly) 100Cat. No.Adapters / Spare Lid100Piecesper pack21 16 211 Adapter for reaction vials 0.5/0.7 ml, Ø 7.9/10 x 28/31 mm (Cat. No 21 16 805) 621 16 212 Adapter for reaction vials 0.25/0.4 ml (Cat. No. 21 16 804) 621 16 213 Adapter for PCR ® tubes 0.2 ml 621 16 900 Spare Lid (Polysulfone) for all fixed angle rotors 1Accessories for Microhematocrit Rotor:Cat. No. Tubes SizePiecesper pack21 16 930 35 µl Microhematocrit capillary tubes, heparinized Ø 1.4 x 50 mm 200Cat. No.AccessoriesPiecesper pack21 16 920 Reading disk 121 16 925 Capillary reader card 121 16 935 Capillary tubes sealing putty (6 plates) 121 16 940 Rubber ring 1For detailed information about the comprehensive range of tubes and bottles fromour production as well as their possible use in centrifuges of other manufacturersplease refer to our catalog “Centrifuge Labware”.The consuma bles a lso inc lude the most common tub es and b ottles for ultracentrifuges.ISO 9001.page 5 of 5