Type 431 - Vinten Radamec

More documents

Recommendations

Info

Copyright © Vinten Broadcast Limited 2005All rights reserved throughout the world. No part of this document may be stored in a retrieval system,transmitted, copied or reproduced in any way including, but not limited to, photocopy, photograph, magnetic orother record without the prior agreement and permission in writing of Vinten Broadcast Limited.Vinten and Vinten/Radamec are registered trademarks of Vinten Broadcast Limited.Printed in Great Britain by DPS, Newmarket, Suffolk.
ForewordThis manual provides full and detailed maintenance and spare parts information for the Vinten/Radamec ®Type 431 Pan and Tilt Head.WARNING!: Read the Safety Section on page 5 before using this head or attempting anyadjustment or repair.Maintenance and repair beyond that detailed in this manual should becarried out only by authorised and trained personnel.It is recommended that this manual is read carefully and the illustrations studied prior to operating or servicingthe head. Attention to the details contained herein will ensure that the head will operate efficiently with theminimum of attention over a long service life. Particular attention must be paid to cleaning, especially after usein adverse conditions.To order spare parts or to obtain further information, application should be made to Vinten Broadcast Limitedor to your local distributor, or visit our website at www.vinten.com.NOTE:Information contained in this document is subject to change.Vinten Broadcast Ltd reserves the right, without notice, to make changes in equipmentdesign or performance as progress in engineering, manufacturing or technology maywarrant.3
Page 1: Type 431PAN & TILT HEADTECHNICAL MA
Page 7: ContentsSection 1 - IntroductionPag
Page 10 and 11: Section 110
Page 12 and 13: Section 2local / remote switchzoom
Page 14 and 15: Section 34 Offer the head up to its
Page 16 and 17: Section 3on the power supply. The h
Page 20 and 21: Section 4Mechanical maintenanceList
Page 22 and 23: Section 411 Fit a new motor in reve
Page 24 and 25: Section 4interchanged between heads
Page 28 and 29: Section 5Single power supply unit (
Page 30 and 31: 7 Set the Local/Remote switch to Lo

Type 431 - Vinten Radamec

Create successful ePaper yourself

Delete template?

Save as template?