Speedy 300 flexx - Seri-Deco

InPack-Technology Maximum dust protection Highest quality components Linear guide rails Ultra-long lifetime Less maintenanceInPack-Technology is a combination of the highestquality components for ultra long lifetime combinedwith protection of the optics and all sensitive components.Trotec systems are designed for minimalwear-and-tear. Our design and manufacturing qualitystandards make sure your Speedy 300 fl exx will beready for years of trouble free, heavy-duty production.You can forget the added costs of spare parts thatneed to be replaced regularly on competitors’ systems.It all adds up to a lower total cost of ownership offerthe lifetime of each Speedy 300 fl exx laser system.Electro-optic autofocusThe Speedy 300 fl exx offers 3 different variants foroptimal focusing on the material: manual focus withfocus gauge, electro-optical with photo-electricguards or via Software. Maximum convenience forthe operator through correct focusing of the laserbeam on the surface of the workpiece.Working platform (ferromagnetic)The working platform of the Seedy 300 fl exx isferromagnetically treated. This means that it is easyto mount thin materials like paper or fi lms usingmagnetic retention.Bi-directional communicationConnects a PC to your Speedy 300 fl exx. This gives youfull control of many laser functions at all times. You canstart any engraving job without leaving your workplace.Control of the exhaust systemTrotec exhaust system owners can automatically controlthis system via JobControl®. For example, you can initiatethe exhaust power before the start of engraving or afterthe end of engraving to optimize the removal of dust orfumes. You also get dynamic feedback on turbine activityand fi lter saturation.StandardsAdditional lensesFor perfect engraving and cutting results, lenseswith different focal lengths may be used,depending on the application. (available lenses:1.5 inch, 2.0 inch, 2.5 and 4.0 inch CO2 lens;3.2 and 5 inch fi ber lens)Temperature sensorSome materials (e.g. acrylics) can fl ame-up inlaser processing – especially during cuttingoperations. In case of imminent danger, anacoustic signal is output and consequentlyensures the greatest possible safety of laseroperation.i-cut® Vision systemPerfect cutting results when processing printedmaterials such as acrylic, MDF, polyester,cardboard, paper, and many more. Registrationmarks are printed along the image. The camerais mounted on the processing head of theSpeedy 300 fl exx and registers the dimensions ofthe printed design by “reading “ the registrationmarks prior to the cutting process.Postscript converterThe unique postscript converter converts EPS and PS ”Postscriptfi les, PDF, BMP, JPEG and TIFF fi les into a “Trotec spoolfi le” format.Exhaust systemsAn exhaust system is absolutely recommended for optimaloperation of the laser. Trotec offers a variety of exhaustsystems depending on the application. Special integratedelectronics let you control the Trotec exhaust systems remotelyvia JobControl® software.Laserpower upgradeThe Speedy 300 fl exx can be economically upgraded at anytime to a higher wattage (CO2 laser up to 60 watts, fi berlaser up to 50 watts).Extended dust protectionFor reliable operation of your laser system, it is very importantto protect dust-senstive components such as motors andelectronics. Unique InPack-Technology handles this. Extendeddust protection protects programmable axes from dust, too. Italso offers supplemental protection if you usually process dustand debris producing materials such as rubber or wood.Options

Technical details of Speedy 300 flexxOverall dimensions (W x D x H):Working area:Max. engraving speed:Accuracy:Mechanical design:Laser design:Weight:1090 x 890 x 590 mm726 x 432 x 200 mmCO2 laser: 355 cm / second, acceleration 5gFiber laser: 200 cm / second, acceleration 5gAddressable accuracy: 5μmStatic repeat accuracy: < ±15μmFully enclosed chassis with double safety interlock systemlaser safety class 2, CE compliantmaintenance-free, brushless DC servo motorsInPack-TechnologySealed-off CO2 laser with 30 or 60 wattsFiber laser with 10, 20, 30 or 50 wattsapprox. 203 kg (depending on laser power)Trotec laser – developed and built in AustriaApplication examples CO2 laserApplication examples fiber laserPrinted on FSC certified paper 45055Trotec Produktions u. Vertriebs GmbHLinzer Str. 156, A-4600 Wels, trotec@troteclaser.comTel. +43 / 72 42 / 239-7002, Fax +43 / 72 42 / 239-7380