SLP Single Pipe for 2007 Polaris 700 H.O. ... - Snowmobile Parts

More documents

Recommendations

Info

ILLUSTRATION #5Polaris 700 Dragon Clutching ChartAltitude(feet)0-3000 ftDrive ClutchDriven ClutchClutch Spring Shift Weight Cluch Spring Driven HelixSLPBlack / Pink#40-75SLP MTX65g#40-823g outer hole1g inner holeTEAM Ind.Red/Black(Stock)TEAM Ind.64/42.36(Stock)3000-6000 ftSLPBlue / Yellow#40-70SLP MTX65g#40-822g outer holeTEAM Ind.Black(Stock)TEAM Ind.56/42.36(Stock)6000-8000 ftSLPBlue / Yellow#40-70SLP MTX62g#40-813g rivet in theouter holeTEAM Ind.Black(Stock)TEAM Ind.56/42.36(Stock)8000-10000 ftSLPBlue / Yellow#40-70SLP MTX62g#40-811g rivet in theouter holeTEAM Ind.Black(Stock)TEAM Ind.56/42.36(Stock)Running RPM 8100-8300Starting Line Products • 743 Iona Rd. Idaho Falls, ID 83401 • Sales (208)529-0244 • Tech (208)524-3397Fax (208)529-9000 • web: www.startinglineproducts.com • e-mail: slp@slp.cc4
Caring for your ceramic coated pipes and/or silencer:Ceramic Coating is an aluminum matrix applied to your exhaust system to provide a thermal barrier for more consistent performance.It is a coating which requires little maintenance to keep your pipes and/or silencer looking like new.Upon completion of new installation, wipe the ceramic coated parts of the exhaust system down with brake cleaner. This willprevent oils and grease (usually in the form of fingerprints) from burning on and staining the exhaust during first initial startup.To maintain your ceramic coated system, wash it with soap and water periodically (especially necessary after trailering it toand from your riding area on roads that have been treated with salt and other ice removing chemicals). Salt and other iceremoving chemicals will attack and eat away at the ceramic coating. This will result in rust coming through the coating.Typically you will notice this rusting after your snowmobile has set for a period of time without the exhaust system beingbrought up to running temperature.Periodically polish your ceramic coated pipes and/or silencer after each washing with an aluminum polish such as Mothers,Maas or Blue Magic aluminum polish that can be found at any automotive parts store. Do not use any acidic cleaners! Forstubborn stains use fine 000 steel wool, then use a soft cloth with polish. Failure to maintain your ceramic coated pipes orsilencer can result in damage to the ceramic coating for which there is no warranty coverage. A little care will insure that yourpipes and/or silencer will continue looking like new for many years.Note: In areas of the ceramic coated system where skin temperatures exceed 1300 degrees F, it is normal for the coating toturn dull gray. These areas should also be washed and polished periodically.Starting Line Products • 743 Iona Rd. Idaho Falls, ID 83401 • Sales (208)529-0244 • Tech (208)524-3397Fax (208)529-9000 • web: www.startinglineproducts.com • e-mail: slp@slp.cc5
Page 1 and 2: SLP Single Pipe for 2007 Polaris 70
Page 3: ILLUSTRATION #3ILLUSTRATION #4Start

SLP Single Pipe for 2007 Polaris 700 H.O. ... - Snowmobile Parts

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?