Chapter 3 Lab A - Securing Administrative Access Using AAA and ...
Chapter 3 Lab A - Securing Administrative Access Using AAA and ...
Chapter 3 Lab A - Securing Administrative Access Using AAA and ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CCNPv6 TSHOOTDec 11 14:28:15.542: DHCPD: using received relay info.Dec 11 14:28:17.556: DHCPD: Sending DHCPOFFER to client 0100.0bdb.04a5.cd (10.1.10.1).Dec 11 14:28:17.556: DHCPD: Check for IPe on Vlan10Dec 11 14:28:17.556: DHCPD: creating ARP entry (10.1.10.1, 000b.db04.a5cd).Dec 11 14:28:17.556: DHCPD: unicasting BOOTREPLY to client 000b.db04.a5cd (10.1.10.1).Dec 11 14:28:17.556: DHCPD: Reload workspace interface Vlan10 tableid 0.Dec 11 14:28:17.556: DHCPD: tableid for 10.1.10.252 on Vlan10 is 0Dec 11 14:28:17.556: DHCPD: client's VPN is .Dec 11 14:28:17.556: DHCPD: DHCPREQUEST received from client 0100.0bdb.04a5.cd.Dec 11 14:28:17.556: DHCPD: Sending DHCPACK to client 0100.0bdb.04a5.cd (10.1.10.1).Dec 11 14:28:17.556: DHCPD: Check for IPe on Vlan10Dec 11 14:28:17.556: DHCPD: creating ARP entry (10.1.10.1, 000b.db04.a5cd).Dec 11 14:28:17.556: DHCPD: unicasting BOOTREPLY to client 000b.db04.a5cd (10.1.10.1).In the above example, with the ip dhcp relay information trust-all comm<strong>and</strong> issued on DLS1, theentire DHCP conversation between PC-B <strong>and</strong> the DLS1 server takes place, <strong>and</strong> PC-B is provided with an IPaddress.EIGRP Authentication-related Comm<strong>and</strong>sDLS2#show ip eigrp neighborsEIGRP-IPv4:(1) neighbors for process 1H Address Interface Hold Uptime SRTT RTO Q Seq(sec) (ms) Cnt Num1 10.1.2.14 Fa0/5 13 00:20:59 1 200 0 290 10.1.200.252 Vl200 14 05:31:25 2 200 0 45In the above example, DLS2 has two EIGRP neighbors, R3 (10.1.2.14) via Fa0/5 <strong>and</strong> DLS1 (10.1.200.252) viaVLAN 200.DLS2#show ip eigrp interfacesEIGRP-IPv4:(1) interfaces for process 1Xmit Queue Mean Pacing Time Multicast PendingInterface Peers Un/Reliable SRTT Un/Reliable Flow Timer RoutesVl200 1 0/0 2 0/1 50 0Fa0/5 1 0/0 1 0/1 50 0In the above example, DLS2 has two interfaces participating in the EIGRP process, VLAN 200 <strong>and</strong> Fa0/5. Bothinterfaces have a peer attached.DLS2#show ip eigrp interfaces detailEIGRP-IPv4:(1) interfaces for process 1Xmit Queue Mean Pacing Time Multicast PendingInterface Peers Un/Reliable SRTT Un/Reliable Flow Timer RoutesVl200 1 0/0 1 0/1 50 0Hello interval is 5 secNext xmit serial Un/reliable mcasts: 0/18 Un/reliable ucasts: 22/9Mcast exceptions: 1 CR packets: 1 ACKs suppressed: 1All contents are Copyright © 1992–2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 13 of 17
Change language