Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
11. Trouble Shootingproblem reason solutionnot enough brake powerno pressure pointSquealing brakecontaminated brake padscontaminated rotorwheel cannot be mountedrattling noise and rough decelerationleaking hose or brakebrake was not run itoil/ lubricants on rotor and/or padsair in the systemleaking systemsbadly aligned framePaint/ powder coating onfitting eyeletsWheel q/r skewer insufficientlytightenedInsufficiently tightenedwheel spokescarelessnesscarelessnessLever blade was pulled withremoved wheelbrake pads worn, holder ofpads is wearing the rotoraccident, incorrectinstallationbreak in the brake (page 4)clean the rotor with warm dishwateror alcohol replace contaminatedbrake padsbleeding the brake (page15)correct transport (page 5)Check hose connections andhose for leaks; replace hose ifnecessary (pages 14/15)align brake caliper with0,2 mm spacers (page9)remove any paint or powdercoating and care for an evencontact surface without burrs.(page7)Increase tightening of q/rskewer and mount it onopposite side of caliper.check for an evenly spokedwheel with high spoketensionbrake pads must be changedclean rotor with MAGURABrake Cleaner, dish water oralcoholPush back the brake padswith transport device or a flatblade screwdriver. (page12)brake pad change (page 12)change hose or defectivebrake lever or caliper (page14)You will find further tips on our website www.magura.com in the FAQsection!! Stay tuned.Español Italiano Nederlands Français English Deutsch18
Change language