CK4200 Series - Corbin Russwin

Quick CodesCK4200Cylinder and KeyingDescriptionSpecifyConventional 6-pin(standard)Less cylinder(s)LCIC 6-pinC6IC 6-pin with temporary construction core (Red) CT6RIC 6-pin with temporary construction core (Blue) CT6BIC 6-pin with temporary construction core (Green) CT6GIC 6-pin with temporary construction coreCT6IC 6-pin less coreCL6Security 1HSSecurity IC 1CHS6-pin disposable temporary coreCT6DAccess 3 ® AP Fixed Core 1APAccess 3 ® AS Fixed Core 1ASAccess 3 ® AHS Fixed Core 1AHSAccess 3 ® AP IC 1ACPAccess 3 ® AS IC 1ACSAccess 3 ® AHS IC 1ACHSPyramid Security 1PSPyramid Security IC 1PCSPyramid High Security 1PHSPyramid High Security IC 1PCHSPyramid with temporary construction coreCTPPyramid Less CoreCLPPyramid disposable temporary construction core CTPDMaster ringMR0-bitted with 2 blank keys(standard)Keyed randomKRConstruction master keyedCMKVisual key control (VKC)- No stamping VKCO- Keys only VKC1- Cylinders and keys (not for HS or CHS) VKC2- Cylinders only (not for HS or CHS) VKC3Concealed key control (CKC)CKC cylinders with VKC keysCKC2CKC cylinders onlyCKC32 keys per lockMore than 2 keysNOTE: 1. Not available in CK4229 function.HandingDescriptionRight HandLeft HandRight Hand ReverseLeft Hand ReverseBackset(standard)KY# (e.g.,KY6)SpecifyRHLHRHRLHRDescriptionSpecify2-3⁄4" (70mm) (standard)3-3⁄4" (95mm) B3345" (127mm) B5007" (178mm) B700FinishDescriptionSpecifyANSI/BHMA 605 (US3) Bright Brass 605ANSI/BHMA 606 (US4) Satin Brass 606ANSI/BHMA 611 (US9) Bright Bronze 611ANSI/BHMA 612 (US10) Satin Bronze 612ANSI/BHMA 613 (US10B) Dark Oxidized Satin Bronze, oil rubbed 613613E Dark Oxidized Satin Bronze - equivalent 613EANSI/BHMA 618 (US14) Bright Nickel Plated 618ANSI/BHMA 619 (US15) Satin Nickel Plated 619619C Satin Nickel Plated with MicroShield ® 619CANSI/BHMA 625 (US26) Bright Chromium Plated 625ANSI/BHMA 626 (US26D) Satin Chromium Plated 626626C Satin Chromium Plated with MicroShield ® 626CANSI/BHMA 629 (US32) Bright Stainless Steel 629ANSI/BHMA 630 (US32D) Satin Stainless Steel 630630C Satin Stainless Steel with MicroShield ® 630CANSI/BHMA 722 Black Oxidized Bronze, oil rubbed 722Zinc levers are plated to match BHMA finish.*Infini-T ® PVD finish standard on 605 and 606 except on the Frascati (FZD) lever. Conventional 605 and conventional 606finishes will be supplied for the Frascati (FZD) lever.Infini-T is a technologically advanced finish produced by a coating process called PhysicalVapor Deposition (PVD). Infini-T provides the ultimate surface protection against theelements and everyday wear and tear.StrikesLip to Center ANSI Curved Lip Specify T-Strike Curved Lip Box Specify1" (25mm) SA100 SC1001-1/8" (29mm) SA118 SC1181-1/4" (32mm) (standard) SC1141-3⁄8" (35mm) SA138 SC1381-1⁄2" (38mm) SA112 SC1121-3/4" (44mm) SA134 SC1342" (51mm) SA200 SC2002-1/4" (57mm) SA214 SC2142-1/2" (63mm) SA212 SC2122-3/4" (70mm) SA234 SC2343" (76mm) SA300 SC300Rabbeted front strike Specify SR118Miscellaneous OptionsDelrin insertDescriptionSpanner head screwsTorx ® head screwsKnob to accept SFIC coreFlat frontANSI wrought strike boxKnurling outside and insideKnurling outside onlyKnurling inside onlyAbrasive coat outside and insideAbrasive coat insideAbrasive coat outsideStainless steel chassisLead lined rose (inside only)Panel applicationSpecifyM01M02M04M10M12M17M20M21M22M23M24M25M26M28PNL** Must specify door thickness before panelis applied, panel thickness and side of thedoor panel is applied to (inside or outside).Door ThicknessDoor ThicknessSpecify1-3/4" (44mm) - 2" (51mm) (standard)2-1/8" (54mm) D2182-1/4" (57mm) D2142-3/8" (60mm) D2382-1/2" (63mm) D212D258 to D5002-5/8" (67mm) - 5"(127mm)* in 1/8"increments* Available only for 10, 20, 51, 55, 57,61 functions.CK4200.1145021-3/14