ED4000 Catalog - Corbin Russwin

Applications and ListingsED4000Pair of DoorsUL ListingMaximumOpening(W x H)ApplicationSurface Vertical RodED4400 x ED4400 8' x 10'ED4400M x ED4400M Panic 8' x 10'ED4400MA x ED4400MA 3Hr. 8' x 10'Two independent doors with two-point latching, swingingin the same direction.Two independent doors with two-point latching, swingingin the same direction.Two independent doors with two-point latching, swingingin the same direction.Surface Vertical Rod (Double Egress)ED4400 x ED4400 8' x 10'ED4400M x ED4400M Panic 8' x 10'ED4400MA x ED4400MA 3Hr. 8' x 10'Two independent doors with two-point latching, swingingin opposite directions.Two independent doors with two-point latching, swingingin the same direction.Two independent doors with two-point latching, swingingin the same direction.Concealed Vertical RodED4800 x ED48008' x 10' Two independent doors with two-point latching,swinging in the same direction.ED4800M x ED4800M Panic 8' x 10'ED4800MA x ED4800MA 3Hr. 8' x 10'Two independent doors with two-point latching, swingingin the same direction.Two independent doors with two-point latching, swingingin the same direction.Concealed Vertical Rod (Double Egress)ED4800 x ED4800 8' x 10'ED4800M x ED4800M Panic 8' x 10'ED4800MA x ED4800MA 3Hr. 8' x 10'Two independent doors with two-point latching, swingingin the opposite direction.Two independent doors with two-point latching, swingingin the same direction.Two independent doors with two-point latching, swingingin the same direction.Note: All ED4000 Series Narrow Stile Pushpad Exit Devices are UL305 panic listed.*UL does not set a door height limitation on panic applications.ED4000.445060-7/13

FunctionsED4000Exit Only, Pull and Thumbpiece TrimsRim/SecureBolt ®ED4200ED4200SInsideOutsideSurfaceVertical RodED4400InsideOutsideConcealed VerticalRod ED4800InsideOutsideType ANSI No. Function DescriptionExit Only 01 Exit only; no trim.Dummy 02Entrance by trim when actuating bar is lockeddown.Nightlatch 03Entrance by trim when latchbolt is retracted bykey. Key removable only when locked.Classroom* 05Entrance by thumbpiece. Key locks or unlocksthumbpiece.Passage 15Entrance by trim when latch is released bythumbpiece. Thumbpiece is always active, nocylinder.Storeroom(Thumbpiece Active)06Entrance by thumbpiece only when releasedby key. Key removable only when locked.*Classroom function trims can be converted to Storeroom function by a simple field adjustment.45060-7/13ED4000.5

FunctionsED4000Knob, Lever and Thumbturn TrimsRim/SecureBolt ®ED4200ED4200SInsideOutsideSurfaceVertical RodED4400InsideOutsideConcealed VerticalRod ED4800InsideOutsideType ANSI No. Function DescriptionDummy 02Entrance by trim when actuating bar is lockeddown.Classroom* 06Entrance by knob or lever. Key locks or unlocksknob or lever.Passage 14Entrance by trim when latchbolt is released byknob or lever. Knob or lever always active, nocylinder.Storeroom (GripActive) 09Entrance by knob or lever only when releasedby key. Key removable only when locked.Classroom* 11Entrance by control turn piece. Key locks orunlocks control.Passage 16 Latchbolt retracted by thumbturn.*Classroom function trims can be converted to Storeroom function by a simple field adjustment.ED4000.645060-7/13

SecureBolt ® FeaturesED4000ED4200SNarrow Stile SecureBolt ® Exit DeviceFeaturesHandingDevice non-handed.Trim handed.Bar LengthEasily field cut to size.Standard: 36" (914mm) bar fits 30"- 36"(762mm-914mm) door.Optional: 24" (610mm) bar fits 24"(610mm) door; specify W024.Optional: 48" (1219mm) bar fits 36"- 48"(914mm-1219mm) door; specify W048.Door Thickness1-3/4" (44mm) standard.Optional: 2" (51mm); specify D200.Optional: 2-1/4" (57mm); specify D214.StileMinimum width 2" (51mm).DeadboltFull 3/4” (19mm) projection, 1” (25mm)wide , positive deadlocking byauxiliary bolt.Cutaway Side ViewMaterialsHigh-grade, heat-treated, corrosion-resistantnickel steel alloy. Finished parts are brass,bronze or stainless steel; stainless steelsprings; nylon bearings.LatchboltStainless steel. Slide action deadbolt withpositive deadlocking by auxiliary bolt. Twopiecedeadbolt mechanism utilizing a rollbacklever which eliminates any contact(friction) with the strike during relocking.Projection3-1/4" (83mm) active, 2-3/4" (70mm)dogged.DoggingStandard: single-point 1/4 turn hex keydogging.Optional: less dogging; specify M51.Optional: cylinder dogging; specify M52.Optional: electric dogging, specify M97.FastenersStandard: machine screws.Optional: sex nuts and bolts; specify M54.StrikeSurface mounted 3/8" (10mm) diameterroller strike, complete with positive lockingplate and shims, ensuring low-frictionrelocking for a long, trouble-free life.Functions and TrimsThrough-bolted lever, knob, pull,thumbturn and thumbpiece trims availablewith wide range of functions; see Trimsand Functions, page 14.CylindersCylinder not included unless specified. SeeQuick Codes, page 32.Removable MullionSee Mullions, page 27.Shim KitOptional for mounting device over raisedvision light molding; specify M58.Applications and ListingsSee page 3.WarrantyFive-year limited.Certification/ComplianceANSIMeets A156.3, Type 4 or 28, Grade 1.Meets A117.1 Accessibility Code.UL/cULAll devices listed for safety as panichardware; devices comply with UL 305standards for panic hardware. UL symbolon active case cover indicates listing.California State Reference CodeThis product has been approved by theCalifornia State Fire Marshal pursuant tosection 13144.1 of the California Healthand Safety Code.NFPAAll exit devices comply with NFPA 101 LifeSafety Code.ADAExit devices, lever trims and pulls complywith Americans with Disabilities Act.FinishesBHMA 605BHMA 606BHMA 611BHMA 612BHMA 613BHMA 618BHMA 619BHMA 625BHMA 626626CBHMA 629BHMA 630630CBHMA 722Bright BrassSatin BrassBright BronzeSatin BronzeOxidized Bronze, oil rubbed,available lacqueredBright Nickel PlatedSatin Nickel PlatedBright Chromium PlatedSatin Chromium PlatedSatin Chromium Platedwith MicroShield ®Bright Stainless SteelSatin Stainless SteelSatin Stainless Steelwith MicroShield ®Black oxidized bronze,oil rubbed45060-7/13ED4000.7

SecureBolt ® FeaturesED4000ED4200S SecureBolt ® Exit Device3/4" (19mm) projection x 1"wide deadbolt- style latchboltwith positive deadlocking byauxiliary boltArchitecturally finished brass,bronze or stainless steelHeavy-duty chassisWrought brass orbronze coverLow profile; no pinch points —closed on all sidesSingle point,1/4 turn hex keydoggingWrought brass orbronze rear coverVector ForcesIn terms of an exit device, vector forces mean that pressure appliedto the door results in a force against the stop and the frame,resulting in door/frame separation. The standard pullmanlatchbolt applies 280 pounds of force against the frame from a400- pound pull on the door.The SecureBolt ® exit device only applies 63 pounds offorce against the frame from a 400-pound pull on the door. Lessforce means the door and frame do not separate, providing ahigher level of security, as the door cannot be pulled open.ED4000.845060-7/13

Rim FeaturesED4000ED4200Narrow Stile Rim Exit DeviceFeaturesHandingDevice non-handed.Trim handed.Bar LengthEasily field cut to size.Standard: 36" (914mm) bar fits 30"- 36"(762mm-914mm) door.Optional: 24" (610mm) bar fits 24"(610mm) door; specify W024.Optional: 48" (1219mm) bar fits 36"- 48"(914mm-1219mm) door; specify W048.Door Thickness1-3/4" (44mm) standard.Optional: 2" (51mm); specify D200.Optional: 2-1/4" (57mm); specify D214.StileMinimum width 2" (51mm).Latchbolt3/4" (19mm) throw, pullman type withstainless steel deadlocking latch.MaterialsHeavy-duty cold-forged steel chassis;heavy-gauge steel mechanisms,electroplated for corrosion resistance;finished parts are brass, bronze orstainless steel; stainless steel springs; nylonbearings.Functions and TrimsThrough-bolted lever, knob, pull,thumbturn and thumbpiece trims availablewith wide range of functions; see Trimsand Functions, page 14.CylindersCylinder not included unless specified. SeeQuick Codes, page 32.Removable MullionSee Mullions, page 27.Shim KitOptional for mounting device over raisedvision light molding; specify M58.Applications and ListingsSee page 3.WarrantyFive-year limited.Certification/ComplianceANSIMeets A156.3, Type 4, Grade 1.Meets A117.1 Accessibility Code.UL/cULAll devices listed for safety as panichardware; devices comply with UL 305standards for panic hardware. UL symbolon active case cover indicates listing.California State Reference CodeThis product has been approved by theCalifornia State Fire Marshal pursuant tosection 13144.1 of the California Healthand Safety Code.NFPAAll exit devices comply with NFPA 101 LifeSafety Code.ADAExit devices, lever trims and pulls complywith Americans with Disabilities Act.FinishesBHMA 605BHMA 606BHMA 611BHMA 612BHMA 613Bright BrassSatin BrassBright BronzeSatin BronzeOxidized Bronze, oil rubbed,available lacqueredProjection3-1/4" (83mm) active, 2-3/4" (70mm)dogged.DoggingStandard: single point 1/4 turn hex keydogging.Optional: less dogging; specify M51.Optional: cylinder dogging; specify M52.Optional: electric dogging; specify M97.FastenersStandard: machine screws.Optional: sex nuts and bolts; specify M54.BHMA 618BHMA 619BHMA 625BHMA 626626CBHMA 629BHMA 630630CBHMA 722Bright Nickel PlatedSatin Nickel PlatedBright Chromium PlatedSatin Chromium PlatedSatin Chromium Platedwith MicroShield ®Bright Stainless SteelSatin Stainless SteelSatin Stainless Steelwith MicroShield ®Black oxidized bronze,oilrubbedStrikeSurface mounted 3/8" (10mm) diameterroller strike, complete with positive lockingplate and shims.45060-7/13ED4000.9

Concealed Vertical Rod FeaturesED4000ED4800Narrow Stile Concealed Vertical Rod Exit DeviceFeaturesHandingDevice handed but easily field reversible.Lever trim handed.Bar LengthEasily field cut to size.Standard: 36" (914mm) bar fits 30"- 36"(762mm-914mm) door.Optional: 24" (610mm) bar fits 24"(610mm) door; specify W024.Optional: 48" (1219mm) bar fits 36"- 48"(914mm-1219mm) door; specify W048.Door Thickness1-3/4" (44mm) standard.Optional: 2" (51mm); specify D200.Optional: 2-1/4" (57mm); specify D214.StileMinimum width 2" (51mm).Door HeightStandard: Top rod for 8' door.Telescoping rod assembly to accommodatevarious door heights.Optional door heights available; see QuickCodes, page 32.LatchboltTop: 3/4" (19mm) throw, pullman typewith automatic deadlatching.Bottom: 5/8" (16mm) throw deadbolt,held retracted during door swing.Vertical Rods1/2" O.D. tubing, electroplated forcorrosion resistance.DoggingStandard: single point 1/4 turn hex keydogging.Optional: less dogging; specify M51.Optional: cylinder dogging; specify M52.Optional: electric dogging; specify M97.FastenersStandard: machine screws.Optional: sex nuts and bolts; specify M54.StrikeTop: adjustable roller strike with positivelocking plate and shims.Bottom: flush mounted.Optional strikes available; see Options andAccessories, page 28.Functions and TrimsThrough-bolted lever, knob, pull,thumbturn and thumbpiece trims availablewith wide range of functions; see Trimsand Functions, page 14.CylindersCylinder not included unless specified. SeeQuick Codes, page 32.Shim KitOptional for mounting device over raisedvision light moding; specify M58.Applications and ListingsSee page 3.WarrantyFive-year limited.Certification/ComplianceANSIMeets A156.3, Type 6, Grade 1.Meets A117.1 Accessibility Code.UL/cULAll devices listed for safety as panichardware; devices comply with UL 305.UL symbol on active case cover indicateslisting.California State Reference CodeThis product has been approved by theCalifornia State Fire Marshal pursuant tosection 13144.1 of the California Healthand Safety Code.NFPAAll exit devices comply with NFPA 101 LifeSafety Code.ADAExit devices, lever trims and pulls complywith Americans with Disabilities Act.FinishesBHMA 605BHMA 606BHMA 611BHMA 612BHMA 613BHMA 618BHMA 619BHMA 625Bright BrassSatin BrassBright BronzeSatin BronzeOxidized Bronze, oil rubbed,available lacqueredBright Nickel PlatedSatin Nickel PlatedBright Chromium PlatedMaterialsHeavy-duty cold-forged steel chassis;heavy-gauge steel mechanisms,electroplated for corrosion resistance;finished parts are brass, bronze orstainless steel; stainless steel springs; nylonbearings.Projection3-1/4" (83mm) active, 2-3/4" (70mm)dogged.BHMA 626626CBHMA 629BHMA 630630CBHMA 722Satin Chromium PlatedSatin Chromium Platedwith MicroShield ®Bright Stainless SteelSatin Stainless SteelSatin Stainless Steelwith MicroShield ®Black oxidized bronze,oilrubbed45060-7/13ED4000.13

Concealed Vertical Rod FeaturesED4000ED4800 Concealed Vertical Rod Panic Exit Device3/4" (19mm) throw deadlocking latchboltLow profile; no pinch points —closed on all sidesArchitecturally finished brass,bronze or stainless steelWrought brass orbronze rear coverWrought brass orbronze coverHeavy-duty chassisSingle point 1/4 turn hexkey dogging5/8" (16mm) throw deadboltED4000.1445060-7/13

Trims and FunctionsED4000Features:• Fourteen architectural finishes• Lever designs allow for design continuum with Corbin Russwin line• 1-year limited warrantyTrim DesignsPassageANSINo. 14DummyANSINo. 02Classroom*ANSINo. 08StoreroomANSINo. 09ArmstrongA8Lever: CastEscutcheon: WroughtCylinder: Rim1 5/8”9 1/2” 4 1/2” A810 A850 A855 A859CitationC8Lever: CastEscutcheon: WroughtCylinder: Rim2 5/8”1 5/8”9 1/2” 4 3/8” C810 C850 C855 C859DirkeD8Lever: CastEscutcheon: WroughtCylinder: Rim2 5/8”1 5/8”9 1/2” 4 1/2” D810 D850 D855 D859EssexE8Lever: CastEscutcheon: WroughtCylinder: Rim2 11/16”1 5/8"9 1/2" 4 5/8" E810 E850 E855 E859LustraL8Lever: CastEscutcheon: WroughtCylinder: Rim2 3/8"1 5/8”9 1/2” 5 1/8” L810 L850 L855 L8592 1/2”NewportN8Lever: CastEscutcheon: WroughtCylinder: Rim1 5/8"9 1/2" 4 13/16" N810 N850 N855 N859RegisR8Lever: CastEscutcheon: WroughtCylinder: Rim2 5/8"1 5/8”9 1/2” 4 3/4” R810 R850 R855 R859PrincetonPR8Lever: CastEscutcheon: WroughtCylinder: Rim2 1/2”1 5/8"9 1/2" 5 1/4" PR810 PR850 PR855 PR8592 1/2"45060-7/13ED4000.15

Trims and FunctionsED4000Features:• Fourteen architectural finishes• Lever designs allow for design continuum with Corbin Russwin line• 1-year limited warrantyTrim DesignsPassageANSINo. 14/15/16DummyANSINo. 02ClassroomANSINo. 05/08/11Storeroom/NightlatchANSINo. 03/06/09/12GlobalG8Knob: WroughtEscutcheon: WroughtCylinder: Rim1 5/8” 3”9 1/2” 2 1/4” G810(14)G850G855(08)G859(09)PlateF4Plate: WroughtCylinder: Rim1 5/8"9 1/2" N/A F4502 N/AF457 2(03)Pull/ThumbpieceT14Pull: CastEscutcheon: WroughtCylinder: Rim1 5/8”9 1/2” T1410(15)6 7/16”2 1/2” 2 1/8”T1450 1,2T1455(05)T1457 1,2(06)PullP10Pull: ExtrudedEscutcheon: WroughtCylinder: RimN/A P1050 2 N/AP1057 2(03)Plate x Thumbturn08Plate: WroughtThumbturn: CastCylinder: Rim1 5/8”O8109 1/2” 2”(16)N/AO855(11)O859(12)Pull x Thumbturn014Pull: CastThumbturn: CastCylinder: Rim1 5/8"9 1/2" 2"O1410(16)6 7/16"N/AO1455(11)O1459(12)Key OnlyK1Note: Available with cylinderoption only. Ex: K157 x 6PN/A N/A N/AK157 2(03)Note: Classroom function trims can be converted to Storeroom function by a simple field adjustment.1. Pull only, no thumbpiece.2. Not recommended for use with surface or concealed vertical rod exit devices.ED4000.1645060-7/13

Utility Trims and FunctionsED4000Offset Pull Trim: P12, P13, P14*P12 P13 P14 ClearanceOffset PullP12Clearance: 2-1/2"4" 4" 3"11"10-3/4"10"Specify Part Number, 716F50M x Finish 119"10"18"2-1/2"P12 P13 P14 ClearanceOffset PullP13Clearance: 2-1/2"4" 4" 3"11"10" 19"10-3/4"10"18"2-1/2"Specify Part Number, 716F51M x Finish 1Offset PullP14Clearance: 2-1/2"P12 P13 P14 Clearance4" 4" 3"2-1/2"11"10-3/4"10" 19"10"18"Specify Part Number, 716F52M x Finish 11. Available in 605, 606, 612, 613, 626, 629 and 630 finishes.*Available on 1-3/4" thick doors only.45060-7/13ED4000.17

Electrified Exit DevicesED4000Electrified Exit DevicesThe Corbin Russwin ED4000 series electrifiedexit devices offer a complete range ofoptions that may be integrated into themonitoring security and alarm systems ofmost buildings. The continuum of appearanceis maintained, as well as the securityand function of the ED4000 mechanicalexit device.List No. Exit Device Description Available OptionsM61 M91 M92 M93 M94 M97 DED4200 Rim Exit Device x x x x x x xED4200S Rim SecureBolt® Device x x x x x x xED4400 Surface Vertical Rod x x x x x x xED4800 Concealed Vertical Rod x x x x x x xElectrified Hardware Option DescriptionsM61M91M92M93M94M97DAlarm OptionBolt MonitorTouchbar MonitorTrim MonitorElectric Latch PullbackElectric DoggingDelayed Egress* Add as suffix to exit device.Example: ED5400D x 630 x RHRNotes:1. The following options cannot be ordered together on the samedevice:D x M52 M52 x M61D x M61 M52 x M97D x M92 M61 x M92D x M94 M94 x M97D x M97 ED4400 x M61 with Monitors M91, M92 or M932. When ordering a Surface Vertical Rod exit device with the D option(ED4400D), rod and latch quards (provided by others) must be used.ED4000.1845060-7/13

Electrified Exit DevicesED4000Electric Latch Pullback - M94Continuous-duty solenoid retracts the latchbolt(s) for momentaryor maintained periods of time. Latch Pullback provides a remotemeans of unlocking exit devices.ApplicationSecureBolt ® Exit DevicesRim Exit DevicesSurface Vertical Rod Exit DevicesConcealed Vertical Rod Exit DevicesListingsUL listed for Panic Exit Hardware.Electrical SpecificationsRequires 782 Controller (120VAC input, output sequencer for oneor two devices). No substitutes; using other power sources voidswarranty. Requires a 4-wire electrical transfer pivot or hinge. Seepage 21 for controller information.SolenoidA dual retraction/holder type solenoid.10 Amp in rush @ 24VDC to 28VDC(.25Amp holding-continuous duty.)Electric Dogging - M97This electronic feature will provide continuous dogging whenpower is applied and the push bar is depressed manually.Interruption or removal of the power will release the pushbar andreturn the exit device back to normal operation.ApplicationSecureBolt ® Exit DevicesRim Exit DevicesSurface Vertical Rod Exit DevicesConcealed Vertical Rod Exit DevicesListingsUL listed for Panic Exit Hardware.Electrical Specifications.35 Amps @ 24VDC-28VDC continuous duty (2) 36 volt holdingmagnets holding force (86 lbf. total)Note: This feature is not available with latch pullback (M94),delayed egress (D) or cylinder dogging (M52) on the same device.OrderingSpecify quick code M97.Device bolts remain retracted for as long as the device isenergized. Removal of power returns the device to the life safety,self-latching mechanical mode.Interface with central or local fire alarm system, automatic dooroperators, access control systems, security alarm systems, andblow open door systems.Note: This feature is not available with electric dogging (M97) ordelayed egress (D) on the same device.OrderingSpecify quick code M94.45060-7/13ED4000.19

Electrified Exit DevicesED4000Delayed Egress Exit DeviceThe delayed egress option providesadditional security and safety in a strongline of panic hardware. The delayedegress exit device is an electromechanicaldevice used to secure interior or exterioropenings. The option is available for rim,SecureBolt® and concealed vertical roddevices in all standard finishes.OperationThe exit door is normally closed andlatched. The Delayed Egress Exit Device“D” secures the door in the locked modewith the solid Red LED indicating lockedmode status. Depressing the push padfor less than 3 seconds will sound thenuisance beep without initiating the alarm.Depressing the pushpad for 3 secondsor longer will initiate an irreversible localaudible beeping tone and a visual amberindicator until the device releases. Theperson depressing the exit bar is deniedegress for 15 or 30 seconds and securitypersonnel are alerted. After the delay timeof 15 or 30 seconds the device releases,the LED changes to Green, and the alarmchanges to a steady tone which continuesto alarm until manually reset by key. Theremote monitoring contact outputs can beused to alert security personnel.Note: The 15-second time delay isstandard. 30-second time delay is optional(may be accepted by local jurisdiction).Applications• For use on hollow metal interior orexterior doors.• Complies with NFPA 101 “Code ForSafety To Life From Buildings AndStructures” by National Fire ProtectionAssociation.• BOCA options available to comply withNational Building Code requirements.BOCA option is not suitable forinstallations in accordance with NFPA101.• 1-3/4" door thickness standard; 2" and2-1/4" optional; specify D200 or D214when ordering.• Standard 36" device fits 36" doors only.Device cannot be cut less than 36".• Option W048 fits doors 42" – 48".Devices cannot be cut less than 42".ED4000.20Listing• UL/cUL Listed– Controlled Exit Panic Devices(FULA/FULA7)– Special Locking Arrangements(FWAX/FWAX7)• BHMA (ANSI A156.3 and ANSIA156.24) Directory of Certified ExitDevicesSpecificationsInput Voltage: 24VDC (+/- 10%) Regulatedand filtered.Power Consumption• Standard Device: 500 mAStandard FeaturesKey Switch Operation:• Normal: The system is armed byapplying power to the device (solid RedLED). Depressing the pushpad for morethan the nuisance delay time starts theexit delay cycle.• Bypass: Turning the key switchclockwise to the bypass position allowsimmediate egress without alarming.The bar functions as a standard exitdevice. (Red LED flashes slow.)• Reset/Delay: Used to reset device afterthe factory set 15 or optional 30-seconddelay cycle has timed out. If the deviceis armed, turning the key switchcounterclockwise to the reset mode willrelease the device without alarm foregress and will rearm after 10 seconds.(Red LED flashes quickly.)Local Visual Status Indicator:• RED: The exit device is secure and thedelayed egress circuitry is energized.• AMBER: The egress cycle has started,indicated by an irreversible localaudible beeping tone.• GREEN: Exit device is in alarm andhas released.Nuisance Delay Time:Depressing for less than 3 seconds soundsan audible beep without activating theirreversible alarm sequence. (Immediatealarm can be selected by removing ajumper on the control board.)Internal Alarm Siren:When the exit device is armed, depressingthe push pad initiates the internal 85dbalarm siren.Remote Control Inputs:• Remote Reset: Accepts a momentarycontact (keyswitch, pushbutton, etc.) toreset the unit during alarm or allowsmomentary egress (10 seconds) whenthe unit is armed.• Remote Bypass: Accepts a momentarycontact to put the unit in a maintainedbypass operation. The exit devicefunctions as a standard device.Alarm Outputs:Two sets of normally open and normallyclosed contacts. Contacts change onlyduring alarm status. One set of contactschanges when device delay cycle hasstarted (Alarm). One set of contactschanges when device has released(Secure).Door Sign:Door sign per code included.Note: This feature is not available with,M52 Cylinder DoggingM61 Alarm OptionM92 Touchbar MonitorM94 Electric Latch PullbackM97 Electric DoggingHow to OrderSpecify “D” suffix after device.Example: ED4200SD45060-7/13

Electrified Exit DevicesED4000OptionsBolt Position Monitor M91:SPDT (Single Pole Double Throw) switchthat monitors the position of the latchboltor vertical rods. To order, specify M91.Outside Trim Monitor M93:Used when outside trim is desired to beused with an external door position switch(by others) input. This switch will allowBypass (disarms device) when the trim isused for ingress. The device requires settingafter entry by means of the keyswitchon the device or a remote switch. To order,specify M93.Note: If an external DPS is not used, standardtrim will allow entry without affectingthe device in an armed mode. The devicewill only be affected whenthe touchbar is depressed.NFPA 101 Requirements:30 Second Delay M88Upon depressing the pushpad for 3 secondsor longer, the device will sound anaudible beeping tone and allow the doorto be opened after 30 seconds. The tonewill then change to a continuous alarmuntil reset. Resetting of the alarm andre-arming of the device is accomplished bymanual means only.To order, specify M88.Note: Where approved by the authorityhaving jurisdiction, a delay not exceeding30 seconds shall be permitted.BOCA Requirements:BOCA 15 Second Delay M89BOCA 30 Second Delay M90Upon depressing the pushpad for1 second or longer, the device will soundan audible beeping tone and allow thedoor to be opened within 15 (or 30)seconds. The tone will then change to acontinuous alarm until rest. Resetting ofthe alarm and re-arming of the device occursautomatically once the door has beenreturned to the closed position for 30 seconds.The 30-second re-arming timer willre-start if the pushpad is depressed or thedoor is re-opened before actual re-armingof the device occurs. A DPS (Door PositionSwitch) is required for the BOCA option.To order, specify M89 (BOCA 15 second)or M90 (BOCA 30 second).Note: BOCA option is not suitable forinstallations in accordance with NFPA 101.Required AccessoriesPower Supply:A regulated and filtered power supply witha Fire Alarm interface is required.1 Amp minimum @ 24VDC per device.Special options will require more amperage.Consult factory.To order, specify:• BPS-24-1 (1 AMP)• BPS-24-2 (2 AMP)• BPS-24-4 (4 AMP)Power Transfer:Allows the power to make the transitionfrom frame to door without pinching orremoval of insulation. Optional powertransfer: EPTL – concealed transfer for upto and over 120° swing doors. To orderspecify Part No. 704F28. Consult catalogfor additional recommended power suppliesand accessories.EPTLPowerTransferEPTDoors upto 120ºswing.TrimsSee Trims and Functions, pages 14-15.CylindersUtilizes a 1-1/8" mortise cylinder with anA02 cam. Cylinder not included unlessspecified. See Quick Codes, page 32.WarrantyExit devices carry a five-year limited warranty.Electronic components carry atwo-year limited warranty. Trim carries aone-year limited warranty.45060-7/13ED4000.21

Electrified Options & AccessoriesED4000BPS Power SupplyOperationPower supplies are designed to providereliable filtered and regulated power forlong life to a variety of electrified hardwarecomponents. All modular power suppliesare designed to meet UL 1481 Standards.Recommended for the SAF, SEC, M97,delayed egress exit devices and electric trim.Features• Fire panel emergency release input• PC Board mounted system LED indicator• Regulated and filtered with inputand output protection• Battery charging is provided from aseparate output terminalElectrical Specifications• Inputs: 115VAC @600mA• Outputs: 12/24 VDC @ 1 Amp, 1.5Amp or 4 Amp, Filtered andregulated outputListings• UL & cUL listed 1012 GeneralPurpose Power Supply• Fire & Burglar Alarm Power SupplyUnit URT2• Releasing device Accessory SYSW• Access Control Systems Units ALVY• Burglar Alarm Systems Power SupplyAPHYApplications• D – Delayed Egress• M97 – Electric Dogging• SAF – Fail Safe mortise device trimcontrol• SEC – Fail Secure mortise devicetrim controlNote: Batteries are not included with theBPS power supply.Model Enclosure Input Output784 Power SupplyFeatures• Provides a filtered and regulated 9 VDCremote power• Requires raceway through the door*• Optional 12 VDC gel cell battery. Providescontinuous operation of in the event of apower failure. To order, specify 793F089.Includes:• Plug-In Wall Transformer withapproximately12’ (3.6m) of shielded wirethat provides input power to the powersupply• Includes 12’ (3.6m) of shielded wire forconnection between power transfer andpower supply• To order separately, specify 793F039*Recommended for new opening. Retrofitapplication may require surface mountedwire mold and transfer loop by others.BPS-24-1 12” (304mm) x 9” (229mm) x 4” (102mm) 115VAC, 50/60 Hz. 1.0 Amp @ 24 VDCBPS-24-2 14” (356mm) x 14” (356mm) x 4” (102mm) 115VAC, 50/60 Hz. 2.0 Amp @ 24 VDCBPS-24-4 15” (381mm) x 18” (457mm) x 6” (152mm) 115VAC, 50/60 Hz. 4.0 Amp @ 24 VDCBPS-12-1 12" (304mm) x 9" (229mm) x 4" (102mm) 115VAC, 50/60 Hz. 1 amp @ 12 VDCBPS-12-3 14" (356mm) x 14" (356mm) x 4" (102mm) 115VAC, 50/60 Hz. 3 amp @ 12 VDCExit Controls and SwitchesKey SwitchesPush ButtonsBPS Power SupplyAudible/Visual Annunciators784 Power SupplyMKAPB2PB3PZ1MKA - (1) SPDT MaintainedMK - (1) SPDT MomentaryMKN - (1) SPDT Momentary NSMK2 - (1) DPDT MomentaryMKPZ x MKS - (1) SPDT Momentary withaudio Double Gang x Additional SwitchNote: All key switches come standard with12/24 VDC bi-color LED.Specifications• Keyswitch for operation using astandard 1-1/8" mortise cylinder (A02cam) (cylinder not included).• Contact Rating 5 Amps @ 12-24VDC• SPDT 3-position.PB2 - (1) SPDT MomentaryPB2 - (1) DPST Remote MomentaryPB3 - (1) DPST MomentaryPB3A - (1) DPST Maintained (Alt. Action)PB3EA - (1) DPST AlternateSpecifications• 3 Amps @ 12-24 VDCPZ1 - Sonalert 90db @ 2ft. 12-24VDC.Mounted on one gang stainless steel plate.Digital EntryDK-12 - Digital Keypad - 4 UserDK-26SS - Digital Keypad NS - 59 User -SS FinishDK-26BK - Digital Keypad NS - 59 User -Black FinishPower TransfersTSB B-C - Door Cord45060-7/13ED4000.25

Electrified ApplicationsED4000Latch Pullback - M94 Option7826000ComponentsED4200 x M94 Latch Pullback Exit Device - Corbin Russwin782 Controller - Corbin Russwin6000 Operator - Norton501 Push Pad - NortonPower Transfer HingeOperationOperation of Push Pads from either side of door will activate the782 Controller for the Latch Pullback Exit Device. An internaltimer on the 6000 will also provide length of time door is openand latch being retracted. Door operator also acts like standardcloser when opened manually.501501Electric Dogging & Touchbar MonitoringSwitch - M97 & M92MKABPSEPTL6000501501ComponentsED4800 x M92 x M97 with Cyl. + Bar Monitor &Electric Dogging - Corbin Russwin6000 Operator - Norton501 Push Pad - NortonPower Transfer HingeBPS Power Supply - Corbin RusswinKey Switch - Corbin RusswinOperationOperation of Electric Dogging combined with the Door MonitorSwitch will enable Push Pads for operation of the 6000. Amaintained keyswitch will control the activation of the electricdogging which is powered by the Power supply. A Fire Alarm Tie-In, if required, will release the dogging and let the operator workin manual mode when activated. (NOTE: Electric Dogging is notautomatic like Latch Pullback. It requires the bar to be pushed inmanually the first time after applying power.)ED4000.2645060-7/13

Electrified ApplicationsED4000Latch Pullback - M94 Option with Norton ®6000 Door Operator782ComponentsED4400 x M94 Latch Pullback Exit Device – Corbin Russwin782 Controller – Corbin Russwin6000 Operator – Norton501 Push Pad – NortonPower Transfer HingeKeyswitch – Corbin Russwin6000 60005015019232OperationActivation and operation of Push Pads from either side of doorwill be controlled by the FAMKA Maintained Keyswitch. The PushPads will in turn activate the 782 Controller for the Latch PullbackExit Device. An internal timer on the 6000 will coordinate andprevent the door from being opened before latch retraction takesplace. Standard timers on the 6000 will also provide length oftime door is open and latch being retracted. Door operator alsoacts like standard closer when opened manually.Rim Device with Electric StrikeBPSComponentsED4200 Exit Device – Corbin RusswinDK-12 – Digital Keypad310-4 Electric Strike – Folger Adam ®BPS Power Supply – Corbin RusswinOperationOperation of DK-12 Digital Keypad will allow keyless entryfrom the non-protected side of opening. Free exit using the exitdevice from the protected side of the door.DK-12ED4000.2745060-7/13

Electrified ApplicationsED4000Rim Exit Device with Delayed Egress Option on“Exit Only” DoorBPSComponentsED4200D Delayed Egress Exit Device – Corbin RusswinPower Transfer HingeBPS Power Supply – Corbin RusswinSurface Door Closer – Corbin RusswinOperationOperation of the ED4200D Exit Device will sound an alarm andactivate either a 15- or 30-second alarm sequence inside of theexit device. After this time period, the device will release thepushbar, making it active, and egress is possible. When the firealarm is activated, power to the exit device will be interrupted,allowing free egress and mechanical latching. Authorized alarmbypass and reset is done through the built-in keyswitch located inthe exit device.Rim Exit Device - High Security ApplicationM91, M92 and M93 Monitoring Switch OptionsWith FAMSS-1C Door Position SwitchDPSComponentsED4200 - A855 Nightlatch Trim – Corbin RusswinM91 Bolt Monitor SwitchM92 Touchbar Monitor SwitchM93 Trim Monitor SwitchDoor Position SwitchPower Transfer HingeSurface Door Closer – Corbin RusswinOperationOperation of the ED4200 Exit Device with the M91, M92, M93and a door position switch can be used together or individually tosound an alarm, shunt an alarm, monitor the door’s security or asa “Request to Exit” in conjunction with a magnetic lock.PTH-12ED4000.2845060-7/13

MullionsED4000808 MullionUsed to install two Rim Exit Devices in a double dooropening. May be quickly and easily removed when a fulldouble door opening is temporarily required.Materials and FinishExtruded aluminum mullion,1-1/4" x 3-1/2" x 8'2" (for 8'0" doors), supplied withtwo integral strikes, top and bottom mounting brackets,two sets of mullion stabilizers, and zinc-plated fastenersfor metal frames and concrete floors. May be cut, drilledand tapped in the field for Rim Exit Devices. Available in628 and 695 finishes.OrderingTo order, specify Part No. 808 x Finish.Mullion Stabilizer KitControls the movement of the mullion. Recommendedfor openings over 7' high or whenever door movementmust be minimized. Available in 628 and 695 finishes.Two sets supplied standard with all 808 mullions. Toorder separately, specify Part No. 653F11-1 x Finish.UPPERMOUNTINGBRACKETEXTRUDEDALUMINUMSTRIKES (2)(INTEGRAL WITHMULLION)MULLIONSTABILIZERLOWERMOUNTINGBRACKET45060-7/13ED4000.29

Options and AccessoriesED4000Shim KitsDesigned for mounting an exit device overraised vision light molding. Each kit containstwo sets of 1/8" thick shims to shima device 1/8" (3mm) or 1/4" (6mm). Blackfinish. To order with exit device, specifyM58. To order separately, specify Part No.Exit Device TypeED4200, ED4200S,ED4800Shim Kit Part No.697F35-8ED4400 697F36-8Cylinder Dogging KitsDesigned to convert a panic device fromhex key dogging to cylinder dogging. Toorder cylinder dogging kit, specify PartNo. x Finish below. Cylinder not included.Bar LengthCylinder Dogging KitPart No.36" (914mm) 653F13 x Finish48" (1219mm) 653F14 x FinishED5000DB Inactive BarNon-operating dummy pushbar available fordoors up to 48" wide. May be field cut fornarrower doors. To order, specify ED5000DBx Finish.Surface and Concealed Vertical RodExtension KitsUsed to extend the height of standard lengthrods supplied with ED4400 and ED4800Series exit devices. Available in 2", 6" and12" sizes. To order with exit device, see Howto Order, page 31. To order separately, specifyPart No. x Finish.Rod ExtensionRod Extension KitPart No.2" (50mm 653F13 x Finish6" (152mm) 653F14 x Finish12" (305mm) 655F17 x FinishED4000.3045060-7/13

Options and AccessoriesED4000Rim Strike(Screws Included)End Cap Reinforcement**A solid steel plate, welded to the endbracket, evenly distributes impact forcesover a larger surface area, eliminatingpoint loading. To order with an exitdevice, specify M109. To order separatelyspecify 705F09 x finish.Flush End CapDurable heavy-duty cast steel or stainlesssteel, sits flush on the exit device railand has a low profile which eliminatescatch points. To order with a device,specify M110. To order separately specify710F00M x finish.Rim StrikeStandard on ED4200 and ED4200S devices,Supplied with two 1/16" (2mm) shims.For doors with 1/2" (13mm) or 5/8"(16mm) stop. Adjustable to compensatefor shrinkage and swelling of door. 3" x 2"(76mm x 51mm). Black finish only. To orderseparately, specify 650F31-8.Surface and Concealed Vertical Rod Strikes(Screws Included)Top StrikeStandard on ED4400 and ED4800 devices.Supplied with two 1/16" (2mm) shimsand one 1/16" (2mm) locking plate.Adjustable to compensate for shrinkageand swelling of door. 1-9/16" x 15/16"(40mm x 24mm). Black finish only. Toorder separately, specify 650F548.Bottom StrikeStandard on ED4400 and ED4800 devices.1-1/16" (27mm) diameter x 1/16" (2mm)lip x 11/16" (17mm) high. Black finishonly.Both top and bottom strikes are includedin the vertical rod parts packet. To orderparts packet, specify 650F57-8.Flush Transom Top Strike BracketOptional for use with ED4400 devices. Usedto mount top strike on openings with flushtransom. 2-1/2" x 1-5/8" (64mm x 41mm).Black finish only. To order with exit device,specify M67. To order separately, specify650F87-8.Bottom Strike for 1/2" ThresholdsOptional for use with ED4400 and ED4800devices. Required for 1/2" (13mm) thresholdor for flush mount. 2-5/8" x 1-1/16" (67mmx 27mm). Black finish only. To order withexit device, specify S09. To order separately,specify 650F88-8.Mullion Stabilizer KitControls the movement of the mullion. Twosets supplied standard with all 808 mullions.Available in 628 and 695 finishes. To orderseparately, specify Part No. 653F11-1 xFinish.Filler PlatesOptional for use on stock metal doors whenrequired. To order, specify Part No. x Finish.Front: 334F99-8 600Optional for use on stock metal doors whenrequired. To order, specify Part No. x Finish.Strike: 236L708018 x FinOptional for use on stock metal doors whenrequired. To order, specify Part No. x Finish.Front: 077F19-8 600Photoluminescent Touchpad CoverThe PathLite patent pending technology offers a number of benefits:• Requires no wiring or maintenance• Recharges with exposure to ambient light• Unaffected by heat or cold• Non-toxic, will not rub or fade• Vandal resistant**Note: Six 1/4 x 20 screws come standard with either M109 option or 705F09 kit. Only two screws required to fasten end cap assembly to door for retrofit. Other four screws are used with SecureBolt ® LatchHead if ordered as an M109 option with complete device. When the kit is ordered a new end cap is also supplied.45060-7/13ED4000.31

CylindersED4000Rim (Trim Only)Description Part Number Cylinder Ring Part NumberCylinder Ring**57 Function Only6-pin 3000-058 270F15 3000-200N* 270F157-pin 3000-058-7 654F07 3000-200-7 654F076-pin, IC 3080-058 654F07 3080-178 654F077-pin, IC 3080-058-7 654F08 3080-178-7 654F086-pin, IC, less core 3070-058 654F07 3070-178 654F077-pin, IC, less core 3070-058-7 654F08 3070-178-7 654F086-pin, Security 3010-058 654F07 3010-200 654F076-pin, Security IC 3090-058 654F07 3090-178 654F077-pin, Pyramid 3020-058 654F07 3020-200 654F077-pin, Pyramid IC 3030-058 654F07 3030-178 654F07*For K157, substitute -200**K157 uses the 270F15 cylinder ringMortise (CylinderDogging Only)Description Part Number Cylinder Ring6-pin 1000-118-A02 N/A7-pin 1000-114-A02-7 270F156-pin, IC 1080-114-A02 270F157-pin, IC 1080-112-A02-7 654F076-pin, IC, less core 1070-114-A02 270F157-pin, IC, less core 1070-112-A02-7 654F076-pin, Security 1010-118-A02 270F156-pin, Security IC 1090-114-A02 270F157-pin, Pyramid 1020-114-A02 270F157-pin, Pyramid IC 1030-114-A02 270F15ED4000.3245060-7/13

How to OrderED4000Ordering ExamplesExit Device OnlyQuantitySeries/FunctionFinishHandMisc.Options24 ED4200S 626 RHR M51-M54Removable MullionWhere to find orderinginformation and Quick CodesTrims and Functions Page 14Removable Mullion Page 27Handing Page 32Door Thickness Page 32Strike Page 32Door Width Page 32Door Height Page 32Miscellaneous Options Page 32Cylinder and Keying Page 32Quantity Mullion Finish12 808 695Exit Device with TrimQuantityExit DeviceTrim/FunctionFinish Hand Door Thickness Door Width Door Height Misc. Options36 ED4400 N855 605 LHR D200 W048 H0706 M51-M54Trim OnlyQuantityTrim/FunctionFinish Hand Door ThicknessCylinderOption24 N855 625 RHR D214 6PContract/Detailed Order – Exit Device with TrimQuantity Keyset Exit DeviceTrim/FunctionFinish Hand Door HeightOptionalStrikeDoor Width Misc. Options Cylinder Option36 AA1 ED4400 C855 626 LHR H0800 S09 W048 M52-M54 7P45060-7/13ED4000.33

Quick CodesED4000Cylinder and KeyingDescription SpecifyLess cylinder(s)(standard)Conventional 6-pin6PConventional 7-pin7PSecurityHSSecurity interchangeable core (IC)CHSIC 6-pinC6IC 6-pin with temporary construction core (Red)CT6RFinishDescriptionSpecifyUS3 Bright Brass 605US4 Satin Brass 606US9 Bright Bronze 611US10 Satin Bronze 612US10BDark Oxidized Satin Bronze,oil rubbed613US14 Bright Nickel Plated 618IC 6-pin with temporary construction core (Blue)IC 6-pin with temporary construction core (Green)IC 6-pin with temporary construction coreIC 6-Pin with temporary disposable coreIC 6-pin less coreSFIC 6-pin with less coreSFIC 6-pin with SFIC disposable temporary coreIC 7-pin (rim only)IC 7-pin with temporary construction core (Red)IC 7-pin with temporary construction core (Blue)IC 7-pin with temporary construction core (Green)CT6BCT6GCT6CT6DCL6CLS6CT6SDC7CT7RCT7BCT7GUS15 Satin Nickel Plated 619US26 Bright Chromium Plated 625US26D Satin Chromium Plated 626Satin Chromium Platedwith MicroShield ®626CUS32 Bright Stainless Steel 629US32D Stain Stainless Steel 630Stain Stainless Steelwith MicroShield ®Satin Aluminum, Clear Anodized(mullions only)630C628Dark Bronze Coated (mullions only) 695— Black oxidized bronze,oil rubbed 722IC 7-pin with temporary construction coreIC 7-Pin with temporary disposable coreCT7CT7DDoor HeightIC 7-pin less core (rim only)CL7Door HeightSpecifySFIC 7-pin with less coreCLS7ED4400 devicesSFIC 7-pin with SFIC disposable temporary core 3CT7SD7'0"(standard)Pyramid Security fixed corePyramid Security ICPyramid Fixed CorePSPCSPHS7'2"7'6"8'0"H0702H0706H0800Pyramid ICPCHS9'0"H0900Pyramid with temporary construction coreCTP10'0"H1000Pyramid less coreBlockout function0-bitted with 2 blank keysKeyed randomConstruction master keyedCLPBO(standard)KRCMKED4800 devices8'0"8'2"8'6"9'0"(standard)H0802H0806H090010'0"H1000ED4000.3445060-7/13

Quick CodesED4000Door WidthMiscellaneous OptionsDoor WidthSpecifyDescription SpecifyHanding24" (610mm) W02436" (914mm) (standard)48" (1219mm) W048Torx ® head screwsKnurling outside and inside (embossed touchbar -device side)Knurling outside only (trim side)Knurling inside only (embossed touchbar -device side)Abrasive coat outside and inside (trim and device)Abrasive coat inside only (device side)M04M20M21M22M23M24HandSpecifyAbrasive coat outside only (trim side)M25Right Hand ReverseRHR24", 36" and 48" PathLite Photoluminescent TouchbarCoverM49Left Hand ReverseLHRLess doggingM51Cylinder doggingM52Door ThicknessSex nuts and bolts (SNBs)Shim kit (for vision light)M54M58DoorSpecifyFlush transom top strike bracket (ED5400 andED5400A only)M671-3/4" (44mm) (standard)2" (51mm) D200High Impact End ClampFlush End CapM109M1102-1/4" (57mm) D214Electrical OptionsStrikeAlarm OptionDescription SpecifyM61DescriptionSpecifyBolt Position MonitorM91Surface and concealed vertical rod Bottomstrike for 1/2" thresholdsS09Touchbar MonitorTrim MonitorM92M93Latch PullbackM94Removable MullionElectric DoggingDelayed EgressM97DDoor HeightSpecifyUp to 8'0" (ED4200 & ED4200S) 80845060-7/13ED4000.35

Facts and FiguresED4000ED4000 Series(all variables)Series "A" "B"ED4000ED4000 x W024ED4000 x W04834-5/8"(880mm)22-5/8"(575mm)46-5/8"(1184mm)18"(457mm)12"(305mm)24"(610mm)Dimensions are shown in: inchesmmED4000.3645060-7/13

Helpful TermsED4000Abrasive CoatHard granular material applied to providea non-slip tactile surface for the visuallyimpaired.Active DoorIn a pair of doors, the door that is operablefrom the trim side.AstragalA vertical member applied to one or bothsides of a pair of doors at the meetingedges. The astragal closes the gap betweenthe two doors.CoordinatorA device used on a pair of doors to ensurethat the inactive door closes before theactive door.Deadlocking LatchA supplemental latch that automaticallydeadlocks the latchbolt when pressure isapplied to it.DoggingA mechanism that allows the latchbolt toremain retracted, permitting the door tooperate as if it were a push-pull; it cannotbe used on fire-rated exit devices.Double EgressA pair of doors of the same hand thatswing in opposite directions, commonlyfound in corridors.Dummy TrimTrim only. Usually used on the inactivedoor of a pair of doors for design balance.Exit Device (Panic Hardware)A door locking device with a pushbar orcrossbar which, when pressed, allowsinstant exit (egress).Fire Exit HardwareAn exit device listed by an independenttesting laboratory as meeting panic, fireand hose stream test standards; used onfire-rated openings.HandThe direction a door swings.Inactive DoorIn a pair of doors, the door that is inoperablefrom the trim side.LatchboltA lock component that has a beveled endand projects into a strike, holding the doorin a closed position.MullionA fixed or removable vertical member thatdivides a door opening and provides alatch surface for a pair of rim exit devices.Open Back StrikeFor mortise exit devices, used on the inactivedoor (usually the vertical rod door) of apair of doors that swing in the same direction.It permits the inactive door to open orclose independently.ReversiblePertains to a product that may be changedin the field to accommodate any hand ofthe door.Shim KitPieces of metal that permit mounting ofan exit device on a door that has a surfaceprojecting vision light (glass bead) molding.Split AstragalAn astragal that is split through the middleon a pair of doors, allowing both doors tooperate independently.ThresholdA strip fastened to the floor beneath adoor. It serves as a stop, prevents heat loss,and provides a strike location for latchingthe bottom rod of a vertical rod exitdevice.TrimA knob, lever, pull, or thumbpiece usedon the outside of an exit device door tocontrol access to an area.Universal Exit DeviceAn exit device that may be used on doorsof either hand without any modifications.Keying and Cylinder TermsBlockout CylinderA cylinder which allows all keys to be temporarilyblocked from operating. It is set bya blockout key.Concealed Key Control (CKC)The marking of standard key symbols ona cylinder in a location that is not visibleonce the cylinder is installed.Construction Master Keying (CMK)A cylinder preparation that allows temporaryaccess by construction personnel.Control keyA key used to remove and install interchangeablecores.CylinderA lock component containing the combinationthat determines which keys willoperate.Security CylinderA cylinder which provides extra resistanceto picking and unauthorized duplicationof keys.Interchangeable Core (IC)A cylinder which can be removed andinstalled quickly with a control key bynon-skilled personnel when rekeying isrequired.Key SymbolA letter/number combination in standardindustry format (e.g., 1AA, AA1, etc.)which indicates exactly how a key or cylinderfits into a keying system.KeywayThe opening in a cylinder plug throughwhich the key enters.Master KeyingPreparation of a cylinder to operate withkeys of different levels of access.Visual Key Control (VKC)The marking of standard key symbols onkeys and on the visible portion of the frontof a cylinder.45060-7/13ED4000.37

Suggested SpecificationED4000Suggested SpecificationExit devices shall be ED4000 Series Narrow Stile Pushpad Exit Devices.The exit device chassis shall be cold forged steel, electroplated for corrosion resistance, and shall be architecturally finished brass,bronze or stainless steel. The pushpad mechanism shall be constructed of extruded aluminum and shall be scalped with architecturallyfinished brass, bronze or stainless steel. The maximum projection shall be 3-1/4" when the pushpad is active and2-3/4" when the pushpad is dogged down. Nylon bearings and stainless steel springs shall be used for long life and durability; onlytorsion springs are acceptable. Rear and active case covers shall be wrought brass or bronze and shall be plated to match the exit bar.Plastic or painted covers are not acceptable. Latchbolts shall be steel and shall incorporate a deadlocking latch feature for increasedsecurity. Devices without deadlocking latches are not acceptable. Mounting screws shall be concealed to deter tampering. Devicesshall be closed on all sides with no pinch points. All exit devices shall be easily field sized to accommodate various door widths.Exit devices shall have single point, one quarter turn hex key dogging standard. Optional cylinder dogging shall be available. Deviceswith hex key dogging shall be easily field converted to cylinder dogging. Panic listed devices shall be available less dogging. Trimsshall be throughbolted with concealed fasteners. Escutcheon and pull type trims shall be constructed of brass or bronze. All levertrims shall use cast or forged levers. On trims with cylinders, the mechanism that locks and unlocks the trim shall be housed in thetrim and not in the active case of the exit device. Lever trims shall match those on Corbin Russwin Mortise and Cylindrical Locksets.Exit devices and trims shall be furnished in BHMA standard architectural finishes.Exit devices shall be listed by Underwriters Laboratories (UL) for safety as panic hardware.Certification:ANSI/BHMA A156.3, Grade 1Exit devices, trims and cylinders shall be from one manufacturer.Trims and electronic components shall carry a two-year limited warranty.Exit devices shall carry a five-year limited warranty.ED4000.3845060-7/13

NotesED400045060-7/13ED4000.39

In U.S.Corbin RusswinArchitectural Hardware225 Episcopal RoadBerlin, CT 06037Phone: 800-543-3658Fax: 800-447-6714corbinrusswin.comIn CanadaASSA ABLOY DoorSecurity Solutions Canada160 Four Valley DriveVaughan, OntarioCanada L4K 4T9Phone: 800-461-3007Fax: 905-738-2478www.assaabloy.caFor more information regarding Corbin Russwin Locksets,Exit Devices, Door Controls and Key Systems, contact yourauthorized Corbin Russwin Distributor or Sales Representative.MicroShield ®As part of their promise to provide innovative solutions to their customers, ASSA ABLOY Group companies offer the MicroShield ® technology,a silver-based antimicrobial coating designed to stem the spread of germs and bacteria. MicroShield ® is a registered trademark of Yale, SecurityInc., an ASSA ABLOY Group company.Corbin Russwin and Design ® and SecureBolt ® are registered trademarks of Corbin Russwin, Inc., an ASSA ABLOY Group company. Norton ® is a registered trademark of YaleSecurity Inc., an ASSA ABLOY Group company. Other products’ brand names may be trademarks or registered trademarks of their respective owners and are mentioned forreference purposes only. These materials are protected under US copyright laws. All contents current at time of publication. Corbin Russwin, Inc., an ASSA ABLOY Groupcompany reserves the right to change availability of any item in this catalog, its design, construction, and/or its materials. Copyright © 2001, 2013 Corbin Russwin, Inc., anASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.45060-7/13