ED4000 Catalog - Corbin Russwin

Options and AccessoriesED4000Shim KitsDesigned for mounting an exit device overraised vision light molding. Each kit containstwo sets of 1/8" thick shims to shima device 1/8" (3mm) or 1/4" (6mm). Blackfinish. To order with exit device, specifyM58. To order separately, specify Part No.Exit Device TypeED4200, ED4200S,ED4800Shim Kit Part No.697F35-8ED4400 697F36-8Cylinder Dogging KitsDesigned to convert a panic device fromhex key dogging to cylinder dogging. Toorder cylinder dogging kit, specify PartNo. x Finish below. Cylinder not included.Bar LengthCylinder Dogging KitPart No.36" (914mm) 653F13 x Finish48" (1219mm) 653F14 x FinishED5000DB Inactive BarNon-operating dummy pushbar available fordoors up to 48" wide. May be field cut fornarrower doors. To order, specify ED5000DBx Finish.Surface and Concealed Vertical RodExtension KitsUsed to extend the height of standard lengthrods supplied with ED4400 and ED4800Series exit devices. Available in 2", 6" and12" sizes. To order with exit device, see Howto Order, page 31. To order separately, specifyPart No. x Finish.Rod ExtensionRod Extension KitPart No.2" (50mm 653F13 x Finish6" (152mm) 653F14 x Finish12" (305mm) 655F17 x FinishED4000.3045060-7/13