ED4000 Catalog - Corbin Russwin

More documents

Recommendations

Info

Suggested SpecificationED4000Suggested SpecificationExit devices shall be ED4000 Series Narrow Stile Pushpad Exit Devices.The exit device chassis shall be cold forged steel, electroplated for corrosion resistance, and shall be architecturally finished brass,bronze or stainless steel. The pushpad mechanism shall be constructed of extruded aluminum and shall be scalped with architecturallyfinished brass, bronze or stainless steel. The maximum projection shall be 3-1/4" when the pushpad is active and2-3/4" when the pushpad is dogged down. Nylon bearings and stainless steel springs shall be used for long life and durability; onlytorsion springs are acceptable. Rear and active case covers shall be wrought brass or bronze and shall be plated to match the exit bar.Plastic or painted covers are not acceptable. Latchbolts shall be steel and shall incorporate a deadlocking latch feature for increasedsecurity. Devices without deadlocking latches are not acceptable. Mounting screws shall be concealed to deter tampering. Devicesshall be closed on all sides with no pinch points. All exit devices shall be easily field sized to accommodate various door widths.Exit devices shall have single point, one quarter turn hex key dogging standard. Optional cylinder dogging shall be available. Deviceswith hex key dogging shall be easily field converted to cylinder dogging. Panic listed devices shall be available less dogging. Trimsshall be throughbolted with concealed fasteners. Escutcheon and pull type trims shall be constructed of brass or bronze. All levertrims shall use cast or forged levers. On trims with cylinders, the mechanism that locks and unlocks the trim shall be housed in thetrim and not in the active case of the exit device. Lever trims shall match those on Corbin Russwin Mortise and Cylindrical Locksets.Exit devices and trims shall be furnished in BHMA standard architectural finishes.Exit devices shall be listed by Underwriters Laboratories (UL) for safety as panic hardware.Certification:ANSI/BHMA A156.3, Grade 1Exit devices, trims and cylinders shall be from one manufacturer.Trims and electronic components shall carry a two-year limited warranty.Exit devices shall carry a five-year limited warranty.ED4000.3845060-7/13
NotesED400045060-7/13ED4000.39
Page 4 and 5: Applications and ListingsED4000Pair
Page 6 and 7: FunctionsED4000Knob, Lever and Thum
Page 8 and 9: SecureBolt ® FeaturesED4000ED4200S
Page 13 and 14: Concealed Vertical Rod FeaturesED40
Page 15 and 16: Trims and FunctionsED4000Features:
Page 17 and 18: Utility Trims and FunctionsED4000Of
Page 19 and 20: Electrified Exit DevicesED4000Elect
Page 21: Electrified Exit DevicesED4000Optio
Page 26 and 27: Electrified ApplicationsED4000Latch
Page 28 and 29: Electrified ApplicationsED4000Rim E
Page 30 and 31: Options and AccessoriesED4000Shim K
Page 32 and 33: CylindersED4000Rim (Trim Only)Descr
Page 34 and 35: Quick CodesED4000Cylinder and Keyin
Page 36 and 37: Facts and FiguresED4000ED4000 Serie
Page 40: In U.S.Corbin RusswinArchitectural

ED4000 Catalog - Corbin Russwin

Create successful ePaper yourself

Delete template?

Save as template?