ED4000 Catalog - Corbin Russwin

Electrified Exit DevicesED4000Electric Latch Pullback - M94Continuous-duty solenoid retracts the latchbolt(s) for momentaryor maintained periods of time. Latch Pullback provides a remotemeans of unlocking exit devices.ApplicationSecureBolt ® Exit DevicesRim Exit DevicesSurface Vertical Rod Exit DevicesConcealed Vertical Rod Exit DevicesListingsUL listed for Panic Exit Hardware.Electrical SpecificationsRequires 782 Controller (120VAC input, output sequencer for oneor two devices). No substitutes; using other power sources voidswarranty. Requires a 4-wire electrical transfer pivot or hinge. Seepage 21 for controller information.SolenoidA dual retraction/holder type solenoid.10 Amp in rush @ 24VDC to 28VDC(.25Amp holding-continuous duty.)Electric Dogging - M97This electronic feature will provide continuous dogging whenpower is applied and the push bar is depressed manually.Interruption or removal of the power will release the pushbar andreturn the exit device back to normal operation.ApplicationSecureBolt ® Exit DevicesRim Exit DevicesSurface Vertical Rod Exit DevicesConcealed Vertical Rod Exit DevicesListingsUL listed for Panic Exit Hardware.Electrical Specifications.35 Amps @ 24VDC-28VDC continuous duty (2) 36 volt holdingmagnets holding force (86 lbf. total)Note: This feature is not available with latch pullback (M94),delayed egress (D) or cylinder dogging (M52) on the same device.OrderingSpecify quick code M97.Device bolts remain retracted for as long as the device isenergized. Removal of power returns the device to the life safety,self-latching mechanical mode.Interface with central or local fire alarm system, automatic dooroperators, access control systems, security alarm systems, andblow open door systems.Note: This feature is not available with electric dogging (M97) ordelayed egress (D) on the same device.OrderingSpecify quick code M94.45060-7/13ED4000.19