Silentblocs and Bushes

Opel/VauxhallKL-0421-2 APulling Device for ball jointsKL-0421-2 AKL-0421-200 ASuitable for Vauxhall/Opel Vectra model 1995 onwards rear axle trailingarm.The tool set KL-0421-2 A enables the removal and installation of the upper andlower ball joint on the rear axle trailing arm within just a few minutes without theneed to remove the trailing arm from the vehicle.Scope of Delivery:KL-0421-2 A Pulling Device for ball jointsPart No. Description Qty.KL-0421-200 APulling Device for ball joints Vauxhall/Opel Vectra without hydr.cyl.1KL-0040-2500 Hydraulic Cylinder 17t 1KL-0040-2552 Adaptor M42x2 to Ø30 mm 1Scope of Delivery:KL-0421-200 A Pulling Device for ball joints without hydr. cyl.Part No. Description Qty.KL-0421-2001 Support sleeve 52 mm 1KL-0421-2002 Press piece (removal) 1KL-0421-2003 Support sleeve (installation) 1KL-0421-2004 Press sleeve 46 mm 1KL-0421-2005 Shoulder nut M12 (flat) 1KL-0421-2006 Extension 1KL-0039-1912-1 Pull spindle M12 1KL-0421-3 Pulling device Opel Astra with Hydraulic Cylinder (Patented)KL-0421-3Suitable for Vauxhall/Opel Astra (2003 onwards) rear axle.Indispensable for the quick and safe removal and replacement of silentblocs onthe rear axle, without removing the latter.KL-0421-300Scope of Delivery:KL-0421-3 Pulling device Opel Astra with Hydraulic CylinderPart No. Description Qty.KL-0040-2500 Hydraulic cylinder 17t 1KL-0040-2552 Adaptor M42x2 to Ø30 1KL-0421-300 Pulling device Opel Astra without Hydraulic Cylinder 1Scope of Delivery:KL-0421-300 Pulling device Opel Astra without hydraulic cylinderPart No. Description Qty.KL-0040-2542 Pull spindle M12 with nut 1KL-0421-3001 Support sleeve with clamping jaw 1KL-0421-3002 Press piece 1KL-0421-3003 Press piece 1KL-1001-1002 Support sleeve short 14-52(174) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 6.E1