Chapter 3 Stateless Server Load Balancing - Brocade

More documents

Recommendations

Info

ServerIron ADX Server Load Balancing Guide ServerIron(config)# server real R2 10.10.11.1 ServerIron(config-rs-R2)# port http ServerIron(config-rs-R2)# exit ServerIron(config)# server virtual-name-or-ip StatelessDNS 192.168.4.69 ServerIron(config-vs-StatelessDNS)# port dns stateless tcp ServerIron(config-vs-StatelessDNS)# bind dns R1 dns ServerIron(config-vs-StatelessDNS)# bind dns R2 dns Syntax: [no] port [stateless [tcp | udp] [no-hash]] The parameter specifies the application port you want to make stateless. The stateless parameter configures the port to be stateless. The tcp | udp parameter restricts stateless operation to the specified protocol (TCP or UDP). The no-hash parameter disables the SLB hashing mechanism for the port (and protocol, if specified). When hashing is disabled, the ServerIron uses the round-robin load balancing method to select a real server for each request. 3 - 4 © 2009 Brocade Communications Systems, Inc. June 2009
Stateless Server Load Balancing June 2009 © 2009 Brocade Communications Systems, Inc. 3 - 5
Page 1 and 2: Chapter 3 Stateless Server Load Bal
Page 3: Configuring the Stateless Hash Tabl

Chapter 3 Stateless Server Load Balancing - Brocade

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?