KALINA ARLEQUIN 3 C Cast iron boiler - klimatika

III- ASSEMBLINGTHEBOILERA. Placement of the cast iron block :A stand should be constructed in compliance with the regulations and taking into account the dimensions and the weight of the boiler.Position the cast iron block by taking into account the dimensions of the casing.B. Hydraulic connection of the heating block to the installation :- Connect the flow circuit and return to the 5/4" tappings.- Connect the drain cock to the 1/2" tapping on the lower part of the front element of furnace.Important : take into account the totalspace of the casing by making thehydraulic connection of the boiler to theheating circuit.C. Fixing the back support of the casing (1):Back supportofcasing (1)GrommetFor this, place the back support of the casingon the upper braces using the two M12DIN 934 screwssupplied withthe screw-kit.Fix the two grommets on to the back supportD.Fixing the insulation:1. Place the insulation around the heatingbody, joining the insulation mat below the heating body.2. Bind it with the tapes but do not tighten tomuch (to obtain optimal insulation).3. Place the pre-cut insulation on the back side (hydraulicconnection and connection with the chimney)4. Hold in place with the tapes.Adapt smoke pipe length according toboilerdimension.PipeFor optimal insulation do not overtighten.E. Coupling of the furnace to the flue :250min.500max.- Provide a 150 or 130/125 mm smoke pipe- Height from socket to axis of smoke pipe : 558 mm- Place the flue collar- Ensure the air tightness of the coupling250min.BoilerImportant :Before installing the boiler, foresee enough space behindit to enable the placing of the rear panels.Burner5