USERS GUIDE - Ideal Heating
USERS GUIDE - Ideal Heating
USERS GUIDE - Ideal Heating
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DISPLAY FUNCTIONS - FAULT MESSAGES<br />
BOILER DISPLAY MESSAGE DESCRIPTION ACTION<br />
Boiler Type Card Fault<br />
Contact Installer<br />
PCB Replacement<br />
Reset Boiler<br />
Low Water Pressure<br />
1 Fill System to 1.0 Bar<br />
2 Bleed Radiators<br />
3 Contact Installer<br />
Overheat Lockout<br />
1 Fill System to 1.0 Bar<br />
2 Bleed Radiators<br />
3 Check Radiator Valves Open<br />
4 Reset Boiler<br />
5 Contact Installer<br />
No Water Flow Lockout<br />
1 Fill System to 1.0 Bar<br />
2 Bleed Radiators<br />
3 Check Radiator Valves Open<br />
4 Reset Boiler<br />
5 Contact Installer<br />
3G9912<br />
BCC Activation Fault<br />
17<br />
Reset the appliance - if the boiler fails to operate then please<br />
contact <strong>Ideal</strong> (if under warranty) or alternatively a Gas Safe<br />
Registered Engineer if outside of the warranty period. In IE<br />
contact a Registered Gas Installer (RGII).<br />
BCC Fault Reset the appliance - if the boiler fails to operate then please<br />
contact <strong>Ideal</strong> (if under warranty) or alternatively a Gas Safe<br />
Registered Engineer if outside of the warranty period. In IE<br />
contact a Registered Gas Installer (RGII).<br />
Low Water Pressure Check system pressure is between 1 & 1.5bar on the pressure<br />
gauge. If the fails to operate then please contact <strong>Ideal</strong> (if under<br />
warranty) or alternatively a Gas Safe Registered Engineer if<br />
outside of the warranty period. In IE contact a Registered Gas<br />
Installer (RGII).<br />
Flow Temperature Overheat Check system pressure is between 1 & 1.5bar on the pressure<br />
gauge. Reset the appliance. If the boiler fails to operate then<br />
please contact <strong>Ideal</strong> (if under warranty) or alternatively a Gas<br />
Safe Registered Engineer if outside of the warranty period. In<br />
IE contact a Registered Gas Installer (RGII).<br />
No Water Flow<br />
cont’d . . . . . . .