Falcon MA Series Service Manual - Access Hardware Supply
Falcon MA Series Service Manual - Access Hardware Supply
Falcon MA Series Service Manual - Access Hardware Supply
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Functions<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong>To order <strong>Falcon</strong> <strong>MA</strong>-<strong>Series</strong> locksets, please consult page 43 for ordering information and assistance.Catalog Number Prefixes: Add the following prefix for the appropriate trim style.Function ANSI A156.13, 2005 PageSCHLAGE ANSI DESCRIPTION FUNCTION<strong>MA</strong>101F01Passage/ClosetLatchsetLatch bolt by knob/levers at all times. 5<strong>MA</strong>161F31ConnectingRoom/ExitLatchLatch bolt operated by knob/lever from inside. Notrim outside. Auxiliary dead latch.6<strong>MA</strong>301 F02 Privacy LockLatch bolt by knobs/levers either side, dead bolt byturn inside or emergency release outside.7<strong>MA</strong>311F19Privacy,Bedroom orBath LockLatch bolt by knobs/levers. Deadbolt by turn frominside and emergency release outside. Rotatinginside knob/lever retracts both bolts.8<strong>MA</strong>321 F22 Privacy LockLatch bolt operated by knob/lever from either sideexcept when outside knob/lever is locked by insideT-turn. Operating inside knob/lever, closing dooror operating outside emergency release unlocksoutside knob/lever.9<strong>MA</strong>371F14Store DoorLockLatch bolt by knobs/levers. Deadbolt by key fromeither side. Throwing deadbolt locks latchbot fromeither side.10<strong>MA</strong>381F09Apartment, ExitLockLatch bolt operated by knob/lever from either side,except when outside knob/lever is locked by keyfrom inside. When outside knob/lever is locked,latch bolt is retracted by key from outside or byoperating inside lever. Auxiliary dead latch.11<strong>MA</strong>411 F30 Asylum LockLatch bolt operated by key from either side. Bothknobs/levers always inoperative. Auxiliary deadlatch.12<strong>MA</strong>431F34IntruderDeadbolt LockLatch bolt operated by knob/lever from either sideexcept when outside knob/lever is locked frominside or outside by key. Dead bolt retracted by keyfrom inside or outside. Operating inside knob/leverretracts both bolts and unlocks outside. Latch boltdead locked when dead bolt is thrown.13<strong>MA</strong>441F32IntruderLatchbolt LockLatch bolt operated by knob/lever from either sideexcept when outside knob/lever is locked frominside or outside by key. When outside knob/lever islocked, latch bolt is retracted by key from inside oroutside or by operating inside knob/lever. Auxiliarydead latch.142
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong>FunctionsFunction ANSI A156.13, 2005 PageSCHLAGE ANSI DESCRIPTION FUNCTION<strong>MA</strong>451 F15 Hotel/Guest Lock<strong>MA</strong>521 F04 Entry/Office Lock<strong>MA</strong>531F12,F20ApartmentCorridor DoorLockLatch bolt operated by key from outside or byoperating inside knob/lever. Outside knob/leveris always inoperative. Dead bolt projected byturn from inside and all keys except emergencykey are shut out. Operating inside knob/leverretracts both bolts. Auxiliary dead latch.Latch bolt operated by knob/lever from eitherside except when outside knob/lever is madeinoperative by buttons in face. When outsideknob/lever is locked, latch bolt is retracted bykey from outside or by operating inside knob/lever. Auxiliary dead latch.Latch bolt operated by knob/lever from eitherside, except when outside knob/lever is madeinoperative by buttons in face. Dead boltoperated by key outside or turn inside. Keyoutside operates both bolts. Operating insideknob/lever retracts both bolts and outsideremains locked. Latch bolt is deadlocked whenoutside knob/lever is made inoperative orwhen the dead bolt is projected. When deadbolt is retracted, knob/lever is unlocked bybuttons in face.151617<strong>MA</strong>541 F21 Entry/Office LockLatch bolt by knobs/levers either side.Deadbolt by key outside or turn inside.18<strong>MA</strong>551 F06 Holdback Lock<strong>MA</strong>561 F05 Classroom Lock<strong>MA</strong>571F13Dormitory or ExitLockLatch bolt operated by lever from either sideexcept when outside lever is locked fromoutside by key. Latch bolt can be locked in aretracted position by key. When outside leveris locked, latch bolt is retracted by key fromoutside or by operating inside lever unlesslatch bolt has been locked in a retractedposition. Auxiliary dead latch. Activate/Deactivate instructions on pageNote: Chassis is handed. For HoldbackActivation instructions see page 48.Latch bolt operated by knob/lever from eitherside except when outside knob/lever is lockedby key. When outside knob/lever is locked,latchbolt is retracted by key from outside orby operating inside knob/lever. Auxiliary latchdeadlocks latch bolt when door is closed.Inside knob/lever always free for immediateuse.Latch bolt operated by knob/lever from eitherside. Dead bolt projected by key from outsideand turn from inside. Operating inside knob/lever retracts both bolts and unlocks outside.1920213
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>101 - Passage or Closet LatchTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280 AS76526 AS76029 AS76140 AS76100INSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON C E77012-IPKNOB/LEVER SECTIONAL D AS76280 AS76526 AS76029 AS76140 AS76100OUTSIDE TRIMKNOB/LEVER ESCUTCHEON E AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON F AE77012-0PROSE (2 REQ'D) G S76012ASSY, LOCK UNIT H A7801FACEPLATE J S77801STRIKE ASSY K A8737-1STRIKE BOX L PE1396DOOR <strong>MA</strong>RKER M Q513-068INSTRUCTION SHEETS N Q513-067SCREW PACKPSee page 345
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>161 - Exit or Communicating LockTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280 AS76526 AS76029 AS76140 AS76100INSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON C E77012-IPKNOB/LEVER SECTIONAL - N/A N/A N/A N/A N/AOUTSIDE TRIMKNOB/LEVER ESCUTCHEON - N/A N/A N/A N/A N/AESCUTCHEON - N/AROSE D S76012ASSY, LOCK UNIT E A7831FACEPLATE F S77805STRIKE ASSY G A8737-1STRIKE BOX H PE1396DOOR <strong>MA</strong>RKER J Q513-068INSTRUCTION SHEETS K Q513-067SCREW PACKLSee page 34PLATE M AS58136
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>301 - Privacy, Bedroom/BathTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280 AS76526 AS76029 AS76140 AS76100INSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON C AE77012-ITKNOB/LEVER SECTIONAL D AS76280 AS76526 AS76029 AS76140 AS76100OUTSIDE TRIMKNOB/LEVER ESCUTCHEON E AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON F AE77012-OTROSE (2 REQ'D) G S76012ASSY, LOCK UNIT H A7802FACEPLATE J S77819STRIKE ASSY K A8737-1STRIKE BOX L PE1396THUMB TURN M AS76319EMERGENCY TURN N AS76853DOOR <strong>MA</strong>RKERINSTRUCTION SHEETSSCREW PACKPRTQ513-068Q513-067See page 347
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>311 - Privacy, Bedroom/BathTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280 AS76526 AS76029 AS76140 AS76100INSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON C AE77012-ITKNOB/LEVER SECTIONAL D AS76280 AS76526 AS76029 AS76140 AS76100OUTSIDE TRIMKNOB/LEVER ESCUTCHEON E AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON F AE77012-OTROSE (2 REQ'D) G S76012ASSY, LOCK UNIT H A7819FACEPLATE J S77819STRIKE ASSY K A8737-1STRIKE BOX L PE1396THUMB TURN M AS76319EMERGENCY TURN N AS76853DOOR <strong>MA</strong>RKERINSCTRUCTION SHEETSSCREW PACKPRTQ513-068Q513-067See page 348
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>371 - Store Door LockSFIC Not ShownTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280 AS76526 AS76029 AS76140 AS76100INSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON C E77012-ICKNOB/LEVER SECTIONAL D AS76280 AS76526 AS76029 AS76140 AS76100OUTSIDE TRIMKNOB/LEVER ESCUTCHEON E AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON F AE77012-OCROSE (2 REQ'D) G S76012ASSY, LOCK UNIT H A7814FACEPLATE J S77819STRIKE ASSY K A8737-1STRIKE BOX L PE1396DOOR <strong>MA</strong>RKER M Q513-068INSTRUCTION SHEETS N Q513-067SCREW PACKPSee page 34CYLINDER, CONVENTIONAL (2 REQ'D)CYLINDER, SFIC (2 REQ'D)R See Cylinder Chart on page 3910
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>381 - Apartment, ExitSFIC Not ShownTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280 AS76526 AS76029 AS76140 AS76100INSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON C E77012-ICKNOB/LEVER SECTIONAL D AS76280 AS76526 AS76029 AS76140 AS76100OUTSIDE TRIMKNOB/LEVER ESCUTCHEON E AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON F AE77012-OCROSE (2 REQ'D) G S76012ASSY, LOCK UNIT H A7809FACEPLATE J S77805STRIKE ASSY K A8737-1STRIKE BOX L PE1396DOOR <strong>MA</strong>RKER M Q513-068INSTRUCTION SHEETS N Q513-067SCREW PACKPSee page 34CYLINDER, CONVENTIONAL (2 REQ'D)R See Cylinder Chart on page 39CYLINDER, SFIC (2 REQ'D)11
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>411 - Asylum or Institutional LockSFIC Not ShownTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280 AS76526 AS76029 AS76140 AS76100INSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON C E77012-ICKNOB/LEVER SECTIONAL D AS76280 AS76526 AS76029 AS76140 AS76100OUTSIDE TRIMKNOB/LEVER ESCUTCHEON E AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON F AE77012-OCROSE (2 REQ'D) G S76012ASSY, LOCK UNIT H A7830FACEPLATE J S77805STRIKE ASSY K A8737-1STRIKE BOX L PE1396DOOR <strong>MA</strong>RKER M Q513-068INSTRUCTION SHEETS N Q513-067SCREW PACKPSee page 34CYLINDER, CONVENTIONAL (2 REQ'D)CYLINDER, SFIC (2 REQ'D)R See Cylinder Chart on page 3912
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>431 - Intruder Dead Bolt LockSFIC Not ShownTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280 AS76526 AS76029 AS76140 AS76100INSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON C E77012-ICKNOB/LEVER SECTIONAL D AS76280 AS76526 AS76029 AS76140 AS76100OUTSIDE TRIMKNOB/LEVER ESCUTCHEON E AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON F AE77012-OCROSE (2 REQ'D) G S76012ASSY, LOCK UNIT H A7813FACEPLATE J S77819STRIKE ASSY K A8737-1STRIKE BOX L PE1396DOOR <strong>MA</strong>RKER N Q513-068INSTRUCTION SHEETS P Q513-067SCREW PACKRSee page 34CYLINDER, CONVENTIONAL (2 REQ'D)T See Cylinder Chart on page 39CYLINDER, SFIC (2 REQ'D)13
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>441 - Intruder Latch Bolt LockSFIC Not ShownTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280 AS76526 AS76029 AS76140 AS76100INSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON C E77012-ICKNOB/LEVER SECTIONAL D AS76280 AS76526 AS76029 AS76140 AS76100OUTSIDE TRIMKNOB/LEVER ESCUTCHEON E AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON F AE77012-OCROSE (2 REQ'D) G S76012ASSY, LOCK UNIT H A7832FACEPLATE J S77805STRIKE ASSY K A8737-1STRIKE BOX L PE1396DOOR <strong>MA</strong>RKER M Q513-068INSTRUCTION SHEETS N Q513-067SCREW PACKPSee page 34CYLINDER, CONVENTIONAL (2 REQ'D)R See Cylinder Chart on page 39CYLINDER, SFIC (2 REQ'D)14
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>451 - Hotel Guest LockSFIC Not ShownTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280 AS76526 AS76029 AS76140 AS76100INSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON C AE77012-ITKNOB/LEVER SECTIONAL D AS76280 AS76526 AS76029 AS76140 AS76100OUTSIDE TRIMKNOB/LEVER ESCUTCHEON E AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON F AE77012-OCROSE (2 REQ'D) G S76012ASSY, LOCK UNIT H A7815FACEPLATE J S77815STRIKE ASSY K A8737-1STRIKE BOX L PE1396THUMB TURN M AS76319DOOR <strong>MA</strong>RKER N Q513-068INSTRUCTION SHEETSPQ513-067SCREW PACK R See page 34CYLINDER, CONVENTIONALT See Cylinder Chart on page 39CYLINDER, SFIC15
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>521 - Entry LockSFIC Not ShownTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280 AS76526 AS76029 AS76140 AS76100INSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON C E77012-IPKNOB/LEVER SECTIONAL D AS76280 AS76526 AS76029 AS76140 AS76100OUTSIDE TRIMKNOB/LEVER ESCUTCHEON E AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON F AE77012-OCROSE (2 REQ'D) G S76012ASSY, LOCK UNIT H A7804FACEPLATE J S77804STRIKE ASSY K A8737-1STRIKE BOX L PE1396DOOR <strong>MA</strong>RKER M Q513-068INSTRUCTION SHEETS N Q513-067SCREW PACKPSee page 34CYLINDER, CONVENTIONALCYLINDER, SFICR See Cylinder Chart on page 3916
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>531 - Apartment Corridor Door LockSFIC Not ShownTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280 AS76526 AS76029 AS76140 AS76100INSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON C AE77012-ITKNOB/LEVER SECTIONAL D AS76280 AS76526 AS76029 AS76140 AS76100OUTSIDE TRIMKNOB/LEVER ESCUTCHEON E AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON F AE77012-OCROSE (2 REQ'D) G S76012ASSY, LOCK UNIT H A7820FACEPLATE J S77820STRIKE ASSY K A8737-1STRIKE BOX L PE1396THUMB TURN M AS76319DOOR <strong>MA</strong>RKER N Q513-068INSTRUCTION SHEETSPQ513-067SCREW PACK R See page 34CYLINDER, CONVENTIONALT See Cylinder Chart on page 39CYLINDER, SFIC17
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>541 - Entry/Office LockSFIC Not ShownTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280 AS76526 AS76029 AS76140 AS76100INSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON C AE77012-ITKNOB/LEVER SECTIONAL D AS76280 AS76526 AS76029 AS76140 AS76100OUTSIDE TRIMKNOB/LEVER ESCUTCHEON E AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON F AE77012-OCROSE (2 REQ'D) G S76012ASSY, LOCK UNIT H A7821FACEPLATE J S77819STRIKE ASSY K A8737-1STRIKE BOX L PE1396THUMB TURN M AS76319DOOR <strong>MA</strong>RKER N Q513-068INSTRUCTION SHEETSPQ513-067SCREW PACK R See page 34CYLINDER, CONVENTIONALT See Cylinder Chart on page 39CYLINDER, SFIC18
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>551 - Holdback LockSFIC Not ShownTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280 AS76526 AS76029 AS76140 AS76100INSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON C E77012-IPKNOB/LEVER SECTIONAL D AS76280 AS76526 AS76029 AS76140 AS76100OUTSIDE TRIMKNOB/LEVER ESCUTCHEON E AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON F AE77012-OCROSE (2 REQ'D) G S76012ASSY, LOCK UNIT H A7806FACEPLATE J S77805-LLSTRIKE ASSY K A8737-1STRIKE BOX L PE1396DOOR <strong>MA</strong>RKER M Q513-068INSTRUCTION SHEETS N Q513-067SCREW PACK R See page 34CYLINDER, CONVENTIONALT See Cylinder Chart on page 39CYLINDER, SFIC19
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>561 - Classroom LockSFIC Not ShownTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280 AS76526 AS76029 AS76140 AS76100INSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON C E77012-IPKNOB/LEVER SECTIONAL D AS76280 AS76526 AS76029 AS76140 AS76100OUTSIDE TRIMKNOB/LEVER ESCUTCHEON E AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON F AE77012-OCROSE (2 REQ'D) G S76012ASSY, LOCK UNIT H A7805FACEPLATE J S77805STRIKE ASSY K A8737-1STRIKE BOX L PE1396DOOR <strong>MA</strong>RKER M Q513-068INSTRUCTION SHEETS N Q513-067SCREW PACKPSee page 34CYLINDER, CONVENTIONALCYLINDER, SFICR See Cylinder Chart on page 3920
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>571 - Dormitory or Exit LockSFIC Not ShownTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280 AS76526 AS76029 AS76140 AS76100INSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON C AE77012-ITKNOB/LEVER SECTIONAL D AS76280 AS76526 AS76029 AS76140 AS76100OUTSIDE TRIMKNOB/LEVER ESCUTCHEON E AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON F AE77012-OCROSE (2 REQ'D) G S76012ASSY, LOCK UNIT H A7813FACEPLATE J S77819STRIKE ASSY K A8737-1STRIKE BOX L PE1396THUMB TURN M AS76319DOOR <strong>MA</strong>RKER N Q513-068INSTRUCTION SHEETSPQ513-067SCREW PACK R See page 34CYLINDER, CONVENTIONALT See Cylinder Chart on page 39CYLINDER, SFIC21
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>581 - Storeroom / Closet LockSFIC Not ShownTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280 AS76526 AS76029 AS76140 AS76100INSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON C E77012-IPKNOB/LEVER SECTIONAL D AS76280 AS76526 AS76029 AS76140 AS76100OUTSIDE TRIMKNOB/LEVER ESCUTCHEON E AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON F AE77012-OCROSE (2 REQ'D) G S76012ASSY, LOCK UNIT H A7807FACEPLATE J S77805STRIKE ASSY K A8737-1STRIKE BOX L PE1396DOOR <strong>MA</strong>RKER M Q513-068INSTRUCTION SHEETS N Q513-067SCREW PACKPSee page 34CYLINDER, CONVENTIONALR See Cylinder Chart on page 39CYLINDER, SFIC22
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>621 - Front Door / Apartment CorridorSFIC Not ShownTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280 AS76526 AS76029 AS76140 AS76100INSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON C AE77012-ITKNOB/LEVER SECTIONAL D AS76280 AS76526 AS76029 AS76140 AS76100OUTSIDE TRIMKNOB/LEVER ESCUTCHEON E AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON F AE77012-OCROSE (2 REQ'D) G S76012ASSY, LOCK UNIT H A7808FACEPLATE J S77811STRIKE ASSY K A8737-1STRIKE BOX L PE1396THUMB TURN M AS76319DOOR <strong>MA</strong>RKER N Q513-068INSTRUCTION SHEETSPQ513-067SCREW PACK R See page 34CYLINDER, CONVENTIONALT See Cylinder Chart on page 39CYLINDER, SFIC23
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>641 - Dormitory LockSFIC Not ShownTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280 AS76526 AS76029 AS76140 AS76100INSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON C AE77012-ITKNOB/LEVER SECTIONAL D AS76280 AS76526 AS76029 AS76140 AS76100OUTSIDE TRIMKNOB/LEVER ESCUTCHEON E AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON F AE77012-OCROSE (2 REQ'D) G S76012ASSY, LOCK UNIT H A7815FACEPLATE J S77815STRIKE ASSY K A8737-1STRIKE BOX L PE1396THUMB TURN M AS76319DOOR <strong>MA</strong>RKER N Q513-068INSTRUCTION SHEETSPQ513-067SCREW PACK R See page 34CYLINDER, CONVENTIONALT See Cylinder Chart on page 39CYLINDER, SFIC24
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>851 - Electrified EL - 12 & 24 VDC (Fail Safe)SFIC Not ShownTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280 AS76526 AS76029 AS76140 AS76100INSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON C E77012-IPKNOB/LEVER SECTIONAL D AS76280 AS76526 AS76029 AS76140 AS76100OUTSIDE TRIMKNOB/LEVER ESCUTCHEON E AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON F AE77012-OCROSE (2 REQ'D) G S76012ASSY, LOCK UNIT H A7851FACEPLATE J S77805STRIKE ASSY K A8737-1STRIKE BOX L PE1396DOOR <strong>MA</strong>RKER M Q513-068INSTRUCTION SHEETS N Q513-067SCREW PACKPSee page 34CYLINDER, CONVENTIONALR See Cylinder Chart on page 39CYLINDER, SFIC25
<strong>MA</strong>881 - Electrified EU - 12 & 24 VDC (Fail Secure)<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong>SFIC Not ShownTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280 AS76526 AS76029 AS76140 AS76100INSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON C E77012-IPKNOB/LEVER SECTIONAL D AS76280 AS76526 AS76029 AS76140 AS76100OUTSIDE TRIMKNOB/LEVER ESCUTCHEON E AE77280 AE77526 AE77029 AE77140 AE77100ESCUTCHEON F AE77012-OCROSE (2 REQ'D) G S76012ASSY, LOCK UNIT H A7881FACEPLATE J S77805STRIKE ASSY K A8737-1STRIKE BOX L PE1396DOOR <strong>MA</strong>RKER M Q513-068INSTRUCTION SHEETS N Q513-067SCREW PACKPSee page 34CYLINDER, CONVENTIONALR See Cylinder Chart on page 39CYLINDER, SFIC26
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>911 - Classroom Dead LockSFIC Not ShownTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL - N/R N/R N/R N/R N/RINSIDE TRIMKNOB/LEVER ESCUTCHEON - N/R N/R N/R N/R N/RESCUTCHEON A AE77012-IEKNOB/LEVER SECTIONAL - N/R N/R N/R N/R N/ROUTSIDE TRIMKNOB/LEVER ESCUTCHEON - N/R N/R N/R N/R N/RESCUTCHEON B AE77012-OKASSY, LOCK UNIT C A7829FACEPLATE D S77816STRIKE ASSY E A8737-1STRIKE BOX F PE1396THUMB TURN G AS76319DOOR <strong>MA</strong>RKER H Q513-068INSTRUCTION SHEETS J Q513-067SCREW PACKCYLINDER, CONVENTIONALCYLINDER, SFICKSee page 34L See Cylinder Chart on page 3927
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>921 - Dead LockTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL - N/R N/R N/R N/R N/RINSIDE TRIMKNOB/LEVER ESCUTCHEON - N/R N/R N/R N/R N/RESCUTCHEON A E77012-IBKNOB/LEVER SECTIONAL - N/R N/R N/R N/R N/ROUTSIDE TRIMKNOB/LEVER ESCUTCHEON - N/R N/R N/R N/R N/RESCUTCHEON B AE77012-OKASSY, LOCK UNIT C A7816FACEPLATE D S77816STRIKE ASSY E A8737-1STRIKE BOX F PE1396DOOR <strong>MA</strong>RKER G Q513-068INSTRUCTION SHEETS H Q513-067SCREW PACK J See page 34CYLINDER, CONVENTIONALCYLINDER, SFICK See Cylinder Chart on page 3928
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>931 - Dead LockSFIC Not ShownTrimLeverKnobDescriptionDane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL - N/R N/R N/R N/R N/RINSIDE TRIMKNOB/LEVER ESCUTCHEON - N/R N/R N/R N/R N/RESCUTCHEON A E77012-IKKNOB/LEVER SECTIONAL - N/R N/R N/R N/R N/ROUTSIDE TRIMKNOB/LEVER ESCUTCHEON - N/R N/R N/R N/R N/RESCUTCHEON B AE77012-OKASSY, LOCK UNIT C A7816FACEPLATE D S77816STRIKE ASSY E A8737-1STRIKE BOX F PE1396DOOR <strong>MA</strong>RKER G Q513-068INSTRUCTION SHEETS H Q513-067SCREW PACK J See page 34CYLINDER, CONVENTIONAL (2 REQ'D)CYLINDER, SFIC (2 REQ'D)K See Cylinder Chart on page 3929
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>12 - Single DummyTrimKnob/Lever on One Side FixedLeverKnobDescription Dane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280-D AS76526-D AS76029-D AS76140-D AS76100-DTRIMKNOB/LEVER ESCUTCHEON B AE77280-D AE77526-D AE77029-D AE77140-D AE77100-DESCUTCHEON C E77012-IPROSE D S76012DOOR <strong>MA</strong>RKEREQ513-068SCREW PACK F E77331TORX SCREW PACK (OPTIONAL)E77308INSTRUCTION SHEET G Q513-06731
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>18 - Double DummyTrimKnob/Lever on Both Sides FixedLeverKnobDescription Dane Sutro Avalon Quantum HanaKNOB/LEVER SECTIONAL A AS76280-D AS76526-D AS76029-D AS76140-D AS76100-DINSIDE TRIMKNOB/LEVER ESCUTCHEON B AE77280-D AE77526-D AE77029-D AE77140-D AE77100-DESCUTCHEON C E77012-IPKNOB/LEVER SECTIONAL D AS76280-D AS76526-D AS76029-D AS76140-D AS76100-DOUTSIDE TRIMKNOB/LEVER ESCUTCHEON E AE77280-D AE77526-D AE77029-D AE77140-D AE77100-DESCUTCHEON F AE77012-0PROSE (2 REQ'D) G S76012DOOR <strong>MA</strong>RKER H Q513-068INSTRUCTION SHEETS J Q513-067SCREW PACK K See page 3432
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong>LeversGalaAG (Avalon-Gala)DG (Dane-Gala)Knob and Lever DesignsQG (Quantum-Gala)SG (Sutro-Gala)NapaAN (Avalon-Napa)DN (Dane-Napa)QN (Quantum-Napa)SN (Sutro-Napa)KnobsHG (Hana-Gala)HN (Hana-Napa)33
Screw Packs<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>-<strong>Series</strong> Screw PacksPartNumberS76300S76301S76302S76303S76306S76307S76331#8-32 x ¹⁄₄” L Machine ScrewDescription#12-12/ #12-24 x 1¹⁄₂” L Wood/machine Combination Screw#12-12/ #12-24 x 1¹⁄₄” L Wood/machine Combination Screw#8-32 x 1¹⁄₄” L Mounting Screwø ¹⁄₄” x 1¹¹⁄₁₆” L Post⁵⁄₁₆” x 1⁹⁄₁₆” L x 2 pcs STD Sindle Assembly³⁄₃₂” Allen Wrench#8-32 x ¹⁄₄” L Machine Screw#12-12/ #12-24 x 1¹⁄₂” L Wood/machine Combination Screw#12-12/ #12-24 x 1¹⁄₄” L Wood/machine Combination Screw#8-32 x 1¹⁄₂” L Mounting Screwø ¹⁄₄” x 2¹⁄₄” L Post⁵⁄₁₆” x 1⁷⁄₈” L x 2 pcs EXT Sindle Assembly³⁄₃₂” Allen Wrench#8-32 x ¹⁄₄” L Machine Screw#12-12/ #12-24 x 1¹⁄₂” L Wood/machine Combination Screw#12-12/ #12-24 x 1¹⁄₄” L Wood/machine Combination Screw#8-32 x 1¹⁄₄” L Mounting Screwø ¹⁄₄” x 1¹¹⁄₁₆” L Post⁵⁄₁₆” x 1¹⁄₄” L x 2 pcs STD Sindle Assembly³⁄₃₂” Allen Wrench#8-32 x ¹⁄₄” L Machine Screw#12-12/ #12-24 x 1¹⁄₂” L Wood/machine Combination Screw#12-12/ #12-24 x 1¹⁄₄” L Wood/machine Combination Screw#8-32 x 1¹⁄₂” L Mounting Screwø ¹⁄₄” x 2¹⁄₄” L Post⁵⁄₁₆” x 1⁹⁄₁₆” L x 2 pcs EXT Sindle Assembly³⁄₃₂” Allen Wrench#8-32 x ¹⁄₄” L Torx Head Machine Screw#12-12/ #12-24 x 1¹⁄₂” L Torx Head Wood/machine Combination Screw#8-32 x ¹⁄₄” L Torx Head Machine Screw#12-12/ #12-24 x 1¹⁄₂” L Torx Head Wood/machine Combination Screw#6 x ¹⁄₂” Torx Head Sheet Metal Screw#8-32 x ¹⁄₄” L Machine Screw#12-12/ #12-24 x 1¹⁄₂” L Wood/machine Combination Screw#12-12/ #12-24 x 1¹⁄₄” L Wood/machine Combination Screw#8-32 x 1¹⁄₄” L Mounting Screw⁵⁄₁₆” x 1⁹⁄₁₆” L STD Spindleø 0.027” Wire, OD; ø ⁵⁄₁₆” x 1³⁄₈” L Spring³⁄₃₂” Allen WrenchUse1³⁄₈”-1⁷⁄₈” door thickness, sectional trim withleversOver 1⁷⁄₈”-2¹⁄₂” door thickness, sectional trimwith levers1³⁄₈”-1⁷⁄₈” door thickness, sectional trim withknobsOver 1⁷⁄₈”-2¹⁄₂” door thickness, sectional trimwith knobsTorx screw pack, sectional trim, no turnTorx screw pack, sectional trim, with turnSingle Dummy Screw PackSpecifyFinish•••••••34
Screw Packs/Strikes<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong>PartNumberE77331#8-32 x ¹⁄₄” LMachine ScrewDescription#12-12/#12-24 x 1¹⁄₂” L Wood/machine Combination Screw#12-12/#12-24 x 1¹⁄₄” L Wood/machine Combination Screw#8-32 x 1¹⁄₄” L Mounting Screw⁵⁄₁₆” x 1⁹⁄₁₆” L STD Spindle#10-24/#10 x 1¹⁄₄” L Wood/machine Combination Screwø 0.027 Wire, ø ⁵⁄₁₆” O.D. x 1³⁄₈” L Spring³⁄₃₂” Allen WrenchUseScrew pack, escutcheon connecting door* 1³⁄₈”-1⁷⁄₈” Thick** Over 1⁷⁄₈”-2¹⁄₂” ThickAvailable in finishes 606, 613, 630Non torx screw packs contain armor front screws, strike screws, trim screws, mortise screws, spindle, mounting postsTorx screw packs contain armor front, strike, and trim screws onlySpecifyFinish•StrikesStrike Lip Length (x) LipA8737-1 1¹⁄₄” Curved LipA8737-2 1⁷⁄₁₆” Curved LipA8737-3 1⁹⁄₁₆” Curved LipA8737-4 1¹¹⁄₁₆” Curved LipA8737-5 ⁷⁄₈” Straight LipLipLength(x)36
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong>CamsCamsCAMs for <strong>Falcon</strong> CylindersThe <strong>Falcon</strong> <strong>MA</strong> <strong>Series</strong> requires a different CAM for keyed functions than its predecessor, the <strong>Falcon</strong> M <strong>Series</strong>. For all keyedfunctions except the <strong>MA</strong>381 function, the <strong>MA</strong> <strong>Series</strong> uses a single CAM for all standard mortise cylinders and a single CAM for allinterchangeable core mortise cylinders. The chart below lists the CAM required.DoorHandingALLALLCAM PartNumber Outside Inside For Cylinder5622-STD (F1)5622-IC (F2)<strong>MA</strong>371, <strong>MA</strong>411, <strong>MA</strong>431,<strong>MA</strong>441, <strong>MA</strong>451, <strong>MA</strong>521,<strong>MA</strong>531, <strong>MA</strong>541, <strong>MA</strong>551,<strong>MA</strong>561, <strong>MA</strong>571, <strong>MA</strong>581,<strong>MA</strong>621, <strong>MA</strong>641, <strong>MA</strong>851,<strong>MA</strong>881, <strong>MA</strong>911, <strong>MA</strong>921,<strong>MA</strong>931, <strong>MA</strong>941<strong>MA</strong>371, <strong>MA</strong>411, <strong>MA</strong>431,<strong>MA</strong>441, <strong>MA</strong>451, <strong>MA</strong>521,<strong>MA</strong>531, <strong>MA</strong>541, <strong>MA</strong>551,<strong>MA</strong>561, <strong>MA</strong>571, <strong>MA</strong>581,<strong>MA</strong>621, <strong>MA</strong>641, <strong>MA</strong>851,<strong>MA</strong>881, <strong>MA</strong>911, <strong>MA</strong>921,<strong>MA</strong>931, <strong>MA</strong>941<strong>MA</strong>371, <strong>MA</strong>411, <strong>MA</strong>431,<strong>MA</strong>441, <strong>MA</strong>931<strong>MA</strong>371, <strong>MA</strong>411, <strong>MA</strong>431,<strong>MA</strong>441, <strong>MA</strong>931STANDARD CYLINDERINTERCHANGEABLECOREThe new <strong>Falcon</strong> <strong>MA</strong> <strong>Series</strong> <strong>MA</strong>381 function uses unique CAMs to operatethe lock. Different CAMs are required, depending on the handing of the lock.The charts on the next page indicate which CAMs are to be used for eachconfiguration.5622 5622-IC37
Cams<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>Falcon</strong> <strong>MA</strong>381 Cylinder CAMConfiguration Chart<strong>Falcon</strong> <strong>MA</strong>381 Cylinder CAMConfiguration Chart (InterchangeableCore)Door Hand Inside Cyl. Cam Outside Cyl. Cam Door Hand Inside Cyl. Cam Outside Cyl. CamRH/RHR 5620-STD (R3) 5621-STD (R4) RH/RHR 5620-IC (R3) 5621-IC (R4)LH/LHR 5620-STD (L3) 5621-STD (L4) LH/LHR 5620-IC (L3) 5621-IC (L4)LH/LHRLH/LHR ICInside (L3)Outside (L4)Inside (L3)Outside (L4)RH/RHRRH/RHR ICInside (R3)Outside (R4)Inside (R3)Outside (R4)Complete cylinders can also be ordered for the <strong>MA</strong>381 function that will include the correct CAM (the door hand must be specified whenordering cylinders for the <strong>MA</strong>381).CAMs for Schlage CylindersThe Schlage Classic cylinders (C, E, and CE keyways) will also operate the <strong>Falcon</strong> <strong>MA</strong> <strong>Series</strong> locks using the 5622-STD CAM.38
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong>Mortise CylindersMortise, Rim and Cam Lock for Standard CylindersNote: Specify finish: 605,606, 613, 625, 626, 630Note: Specify finish: 605,606, 613, 625, 626, 630Mortise CylinderCylinders are furnished with#5622 cam unless otherwisespecified.See table for product numbers.See page 37 for optional camsand 41 for collars.Thumbturn CylinderFurnished with #5622 camunless otherwise specified.See table for product numbers.See page 37 for optional cams and41 for collars.Dummy CylinderUsed to plug hole in doorwhere lock remains but cylinderoperation is no longer needed.984 D 1”985 D 1-1/8”Keyed Mortise CylindersCatalogNumberLength Pins Application985 1-1/8” 5 or 6 Generic986 1-1/4” 5 or 6 Generic987 1-3/8” 6 or 7 Generic988 1-1/2” 6 or 7 Generic990 1-3/4” 6 or 7 Generic992 2” 6 or 7 Generic250 1-1/8” 6 M451 hotel function251 1-1/4” 6 M451 hotel function252 1-3/8” 6 M451 hotel function253 1-3/8” 7 M451 hotel functionThumbturn Mortise CylindersCatalogNumberLength Pins Application985T 1-1/8” - Generic986T 1-1/4” - Generic973 1-1/8” - M911 ClassroomThumbturn, RH (CCW)974 1-1/8” - M911 Classroomthumbturn, LH (CW)Note: Specify finish: 605,606, 613, 625, 626, 63039
Mortise Cylinders<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong>Cylinder CollarsStandard Collars for Cylinders Ordered SeparatelyLength Cylinder Non-AR Cams AR Cam1” 984D A08794-000 -1-1/8” 250, 965, 966, 973, 974, 985 <strong>Series</strong> A08794-000 008876-0021-1/4” 251, 986 <strong>Series</strong> A08794-001 008876-0031-3/8” 252, 253, 987, C987, C997 A08794-002 008876-004Longer C260 <strong>Series</strong>, (C)988, (C)990, (C)992 A08794-000 008876-000Escutcheon Trim RingsDoorThicknessFunction9851-1/8”9861-1/4”(C)9871-3/8”(C)9881-1/2”1-1/2” Single cylinder - A08790-000 A08790-001 A08790-0021-1/2” Double cylinder A08790-000 - - -1-3/4” Single cylinder - - A08790-000 A08790-0011-3/4” Double cylinder - A08790-000 A08790-001 A08790-0022” Single cylinder - - A08790-000 A08790-0012” Double cylinder - - A08790-000 A08790-0012-1/4” Single cylinder - - - A08790-0002-1/4” Double cylinder - - - -2-1/2” Single cylinder - - - -2-1/2” Double cylinder - - - -Sectional Trim RingsDoorThicknessFunction9851-1/8”9861-1/4”(C)9871-3/8”(C)9881-1/2”1-1/2” Single cylinder A08794-001 A08794-002 - -1-1/2” Double cylinder A08794-002 A08794-003 - -1-3/4” Single cylinder A08794-000 A08794-001 - -1-3/4” Double cylinder A08794-001 A08794-002 A08794-002 -2” Single cylinder - A08794-000 A08794-001 A08794-0022” Double cylinder A08794-000 A08794-001 A08794-002 A08794-0032-1/4” Single cylinder - - A08794-000 A08794-0012-1/4” Double cylinder - A08794-000 A08794-001 A08794-0022-1/2” Single cylinder - - - A08794-0002-1/2” Double cylinder - - A08794-000 A08794-001Specify part number and finish when ordering.(e.g. A08790-000-626)40
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong>Mortise CylindersTrim Rings & CollarsABABADim. A Dim. B Part No.3/32” 9/32” A08790-0007/32” 13/32” A08790-00111/32” 17/32” A08790-00215/32” 21/32” A08790-00343/64” 55/64” A08790-0043/32” 9/32” A08794-0007/32” 13/32” A08794-00111/32” 17/32” A08794-00215/32” 21/32” A08794-0031/8” - 008876-0003/16” - 008876-0051/4” - 008876-0013/8” - 008876-0021/2” - 008876-0035/8” - 008876-004Wave washer included.To order separately,specify 008789-001-60.008862-000For all rim cylinders and cam locks.Note: Specify finishes: 605, 606, 612, 613, 625, 626Specify part number and finish when ordering.(e.g. A08790-000-626)41
Electrical LocksElectrically Locking<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong><strong>MA</strong>851 Electrically Locked (Fail Safe):Outside trim is continuously locked electrically. The latchbolt is retracted by a key outside or by the knob/lever inside.Switch or power failure allows the outside knob/lever to retract the latchbolt. The auxiliary latch deadlocks the latchboltwhen the door is closed. The inside knob/lever is always free for immediate exit.<strong>MA</strong>881 Electrically Unlocked (Fail Secure):Outside trim is unlocked electrically. During switch or power failure, the latchbolt is retracted by a key outside or byknob/lever inside. The auxiliary latch deadlocks the latchbolt when the door is closed. The inside knob/lever is alwaysfree for immediate exit.Electrical Requirements:Voltage: 12V DC +/- 10%Operating Temperature: Max +151° F, Min. -31° FOperating Current: .42 AmpsHolding Current: .135 AmpsVoltage: 24V DC +/- 10%Operating Temperature: Max +151° F, Min. -31° FOperating Current: .21 AmpsHolding Current: .135 AmpsTypical Installation:All installations should be in accordance with local electrical codes and National Electrical Code NFPA #70. It isrecommended that each lock have its own 12 or 24 volt transformer. Be sure to select the proper transformer for thelock. Two or more locks may be operated in parallel from a single transformer provided it has the necessary currentrating. DO NOT connect locks in series from a higher voltage rated transformer. Damage to locks may occur if theyconnect to a supply circuit that also contains electromagnetic devices. The transient voltage must be suppressed atthe equipment producing them before connecting the locks to a circuit. A varistor rate at 35 volts (at peak current) maybe used for transient voltage protection.SolenoidOperatedLockRectifier (Not Furnished)Installvaristorhereif used(not furnished)Door Connector(not furnished)Transformer(not furnished)Switch(not furnished) 12 or 24V AC 110V AC42
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong>Ordering ProceduresHow to OrderFor correct ordering, and to ensure no delays in shipment ofyour order, the following descriptive data must be listed in thesequence shown. Necessary information can be found in otherparts of this manual. The example below shows an order for 16each <strong>MA</strong> locksets in the 521 Entry function, DG (Dane-Gala) trimdesign in a 626 (satin chrome) finish, 8 RH (right hand) and 8LH (left hand) to accommodate doors 1³⁄₄” thick with AA1-AA16keying.Quantity: Indicate the quantity required.Catalog Number: Select catalog number.Trim Design: Indicate letter of knob or lever design followed byletter of rose or escutcheon design.Example: DG-D for Dane lever followed by G for Gala rose.Finish: When the finish is the same for the outside and insidetrim, it is shown once (626). For split finishes, the outside isdesignated first, then the inside (626 x 625).Latch: Two-piece mechanical anti-friction standard. All catalogHow to Order ExampleQty.CatalogNumberTrimDesignDoor HandFinish Latch Strike Cylinder RH LH RHR LHR Detail8 <strong>MA</strong>521P DG 626 STD STD 6-PIN X AA1-AA8 1-3/4” DR8 <strong>MA</strong>521P DG 626 STD STD 6-PIN X AA9-AA16 1-3/4” DRFinishes<strong>Falcon</strong> offers several finish choices to compliment thedesign elements of most any project. <strong>Falcon</strong> applies thebest available protective plating or coating to the surface ofour products to minimize the exposure to weather, pollution,perspiration, extremes of climate, frequency of us and otherTrim Finishes ChartDescription ANSI No. Available onBright Brass 605 US 3 All TrimSatin Brass 606 US 4 All TrimSatin Bronze Oil 613 US 10B All TrimRubbedBright Chrome 625 US 26 All TrimSatin Chrome 626 US 26D All TrimSatin Stainless Steel 630 US 32D All Trimnumbers shown in this manual indicated 2³⁄₄” backset.Strike: 4⁷⁄₈” x 1¹⁄₄” x 1¹⁄₄” lip-to-center with curved lip standard.Optional strikes with shorter or longer lip lengths available.Cylinder Type: For 6-Pin, add 6-Pin. For 7-Pin, add 7-Pin.Door Hand: See chart.Keying Detail: We suggest using the standard terms developedby the A.H.C. (Consult Factory).Example: AA1 - Grand Master keyed, Master keyed, change key 1.Interchangeable Core: To order product capable of acceptingan interchangeable core, add “B” less SFIC (for interchangeablecore). To order product with an interchangeable core, add “SFIC”(with interchangeable core). Ex: “G” with <strong>Falcon</strong> SFIC core.Keyway: “G” is standard on regular cylinders, “A” is standard oninterchangeable cores. Other keyways available. See price book.Additional Keys: Note the total number of keys required.Large Bow Keys: Add - “with large bow keys”.factors. Please consult with us if your building is subjected tochemical or corrosive conditions, as some finishes would notbe recommended for these areas. <strong>Falcon</strong> recommends chromeplated or stainless steel finishes for high corrosive environments.How to Determine the Hand of a Door43
Installation Instructions<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong>Q513-067Instrucciones de instalaciónInstallation Instructions<strong>Falcon</strong> <strong>MA</strong>-LockNotice d'installation*For <strong>MA</strong>12, <strong>MA</strong>18, and <strong>MA</strong>161 Function Installation, See Last Page*Para obtener información sobre la instalación de las funciones<strong>MA</strong>12, <strong>MA</strong>18 y <strong>MA</strong>161, vea la última página*Pour l'installation des options <strong>MA</strong>12, <strong>MA</strong>18 et <strong>MA</strong>161, consultez la dernière page1 2 Install Spindles and Screw TogetherInstall LockcaseInstale la caja de la cerraduraInstallez le mécanisme de serrureInstale los husillos y el tornillo juntosFixez ensemble les axes de poignée et la vis!Fully Tighten in Step 8Realice los ajustes completos en el paso 8Serrez fermement à l'étape 8INSIDEInteriorIntérieurSpindle with Screw MUST be Inside!¡El husillo con el tornillo DEBEestar en el interior!L'axe de poignée et la visDOIVENT être à l'intérieur!
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong>Installation Instructions3Install Lever Posts and ScrewsInstale los postes de la palanca y los tornillosInstaller les tiges de levier et les vis6Identify Trim and InstallIdentifique el ribete e instáleloIdentifiez la garniture et installezEscutcheon with ThumbturnEscudo con tuerca mariposaÉcusson et barrette tournante4!Mounting Posts Must Be Installed On Outside Lever!¡Los postes de montaje se deben instalar fuera de la palanca!Les tiges de montage doivent être installéesà l'extérieur du levier!Install Lever AssembliesInstale los ensamblados de la palancaInstallez les assemblages de levierINSIDEInteriorIntérieurcabEscutcheonEscudoÉcussonabINSIDEInteriorIntérieurINSIDEInteriorIntérieurc5RoseRosetónRosetteabINSIDEInteriorIntérieurINSIDEInteriorIntérieurc45
Installation Instructions<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong>7Identify Trim and Secure to DoorIdentifique el ribete y asegúrelo en la puertaIdentifiez la garniture et fixez à la porte8If Included, Install CylinderSi el cilindro está incluido, instáleloInstallez le cylindre, si inclusEscutcheon with ThumbturnEscudo con tuerca mariposaÉcusson et barrette tournanteEscutcheonEscudoÉcussonINSIDEInteriorIntérieurCylinder and Mortise Retaining Screws MUST Be Fully Tightened!¡El cilindro y los tornillos retenedores de la cerradura de muescasDEBEN estar bien ajustados!Les vis de fixation du cylindre et de la mortaiseDOIVENT être serrées fermement!9!Install Armor FrontInstale el frente del blindajeInstallez la plaque de blindageINSIDEInteriorIntérieurINSIDEInteriorIntérieurRose with ThumbturnColoque el rosetón con la tuerca mariposaRosette et barrette tournanteINSIDEInteriorIntérieurINSIDEInteriorIntérieur46
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong>Installation InstructionsMortise Rehanding (If Required)Remanipulación de la cerradura de muescas (si se requiere)Déplacement de la mortaise (si nécessaire)d. Move Handing Screws to Opposite Sided. Mueva los tornillos de manejo al lado opuestod. Déplacer les vis de réglage du côté opposéa. Remove Screwa. Quite el tornilloa. Retirez la visNote: Handing Screws to be Located on Non-Locking SideNota: Los tornillos de manejo se deben ubicaren el lado que no tiene la cerraduraRemarque : Les vis de réglage doivent figurer au côté sans verrouillageb. Remove Latch Bolt and Rotate 180˚b. Quite el perno del pestillo y gírelo 180°b. Retirez le pêne demi-tour et tourner à 180°<strong>MA</strong>551 Holdback Lock HandingManejo de la cerradura de retención <strong>MA</strong>551Verrou de réglage de retenue <strong>MA</strong>551180˚Note: Piece Must Sit Below Face PlateNota: La pieza debe ubicarse debajode la placa frontalNote: La pièce doit siéger en-dessousdu plateau de montagec. Reinstall Latch Bolt and Screwc. Vuelva a instalar el perno y el tornillo del pestilloc. Installez le pêne demi-tour et la visRetractor Spring(TS 5754)Hub(TS 6854)Spacer(TS 6703)Locking Hub(TS 7876)1) Remove Cover (Not Shown)2) Remove Retractor Spring3) Reverse the Order of Hub and Locking Hub4) Replace the Retractor Spring and Cover5) Change Direction of Latchbolt Head if Necessary1) Quite la cubierta TS 7812-FAL (no se muestra)2) Quite el resorte de retracción TS 57543) Invierta el orden de los cubos TS 7876 y TS 68544) Reemplace el resorte de retracción TS 5754 y la cubierta TS 7812-FAL5) Si es necesario, cambie la dirección del cabezal del pestillo de resorte1) Enlevez le couvercle TS 7812-FAL (non illustré)2) Enlevez le ressort de retrait TS 57543) Inversez l'ordre des moyeux TS 7876 et TS 68544) Remplacez le ressort de retrait TS 5754 et le couvercle TS 7812-FAL5) Modifiez la direction de la tête de pêne demi-tour, si requis47
Installation Instructions<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong>Special Function InstallationInstalación de funciones especialesInstallation des fonctions spéciales<strong>MA</strong>551 Holdback<strong>MA</strong>551 la función de retención<strong>MA</strong>551 la fonction de retenue<strong>MA</strong>12 - Single Dummy Installation<strong>MA</strong>12 - Instalación de vástago simple<strong>MA</strong>12 - Installation d'une fausse poignéeOROOU<strong>MA</strong>18 - Double Dummy Installation<strong>MA</strong>18 – Instalación de vástago doble<strong>MA</strong>18 - Installation de deux fausses poignéesTo Activate Holdback FunctionPara activar la función de retenciónPour activer la fonction de retenue1) From the Unlocked Position, Rotate Outside Knob/Lever toRetract Latchbolt2) Rotate Key 360˚ Counterclockwise3) Release Lever/Knob1) Cuando la cerradura está abierta, gire la palanca/perilla exteriora la posición del pestillo de resorte retráctil2) Gire la llave 360° en sentido antihorario3) Suelte la palanca/perilla1) À partir de la position non verrouillée, tournez le bouton oule levier extérieur pour dégager le pêne demi-tour2) Tournez la clef à 360° dans le sens antihoraire3) Relâchez le levier/boutonTo Deactivate Holdback FunctionPara desactivar la función de retenciónPour désactiver la fonction de retenue1) Insert Key and Rotate 360˚ Clockwise1) Inserte la llave y gírela 360° en sentido horario1) Insérez la clef et tournez 360° dans le sens horaireOROOUEscutcheon OnlyEscutcheon OnlyEscutcheon OnlyEscutcheon OnlyEscutcheon OnlyEscutcheon OnlyOROOU<strong>MA</strong>161 - Exit or Communicating Lock<strong>MA</strong>161 – Cerradura de salida o comunicación<strong>MA</strong>161 - Verrou de sortie ou de porte communicante!Install on the Mechanism CaseInstalar en el mecanismo de cajaInstaller sur le boîtier du mécanismeabcOROOU 48
<strong>MA</strong>-<strong>Series</strong> <strong>Service</strong> <strong>Manual</strong>Installation InstructionsNOTE: These templates are not scale; do NOT print to use as dimensional template.Q513-068<strong>MA</strong>-<strong>Series</strong> Template2³⁄₄" (70mm) BacksetMontaje horizontal de cerradurafor Right-Handed Door Inside of Door La marge de reculementPlantilla de la Serie <strong>MA</strong> Interior de la puertapara puerta que abre Intérieur de la portehacia la derechaA ¹⁹⁄₃₂" (15mm)Gabarit pour séries <strong>MA</strong>Escutcheon ONLYpour porte ouvrant à droiteEscudo solamenteSectionalseccionalesen coupeINSIDE PREPARATIONPREPARACIÓN DEL INTERIORPRÉPARATION DE L'INTÉRIEURFunctions DrillFunciónPerforarFonctionPercerB C D E<strong>MA</strong>101, <strong>MA</strong>521, <strong>MA</strong>551,<strong>MA</strong>561, <strong>MA</strong>581, <strong>MA</strong>851, X X<strong>MA</strong>881, <strong>MA</strong>18<strong>MA</strong>161 *<strong>MA</strong>301, <strong>MA</strong>311, <strong>MA</strong>321,<strong>MA</strong>451, <strong>MA</strong>531, <strong>MA</strong>541,<strong>MA</strong>571, <strong>MA</strong>621, <strong>MA</strong>641<strong>MA</strong>371, <strong>MA</strong>381, <strong>MA</strong>411,<strong>MA</strong>431, <strong>MA</strong>441<strong>MA</strong>931<strong>MA</strong>921<strong>MA</strong>911, <strong>MA</strong>941<strong>MA</strong>12**C LEscutcheonEscudoCacheINSIDE PREPARATIONPREPARACIÓN DEL INTERIORPRÉPARATION DE L'INTÉRIEURFunctions DrillFunciónPerforarFonctionPercerA B C D E<strong>MA</strong>101, <strong>MA</strong>521, <strong>MA</strong>551,<strong>MA</strong>561, <strong>MA</strong>581, <strong>MA</strong>851, X X X<strong>MA</strong>881, <strong>MA</strong>18*<strong>MA</strong>161<strong>MA</strong>301, <strong>MA</strong>311, <strong>MA</strong>321,<strong>MA</strong>451, <strong>MA</strong>531, <strong>MA</strong>541,<strong>MA</strong>571, <strong>MA</strong>621, <strong>MA</strong>641<strong>MA</strong>371, <strong>MA</strong>381, <strong>MA</strong>411,<strong>MA</strong>431, <strong>MA</strong>441XXX X X XX X X X<strong>MA</strong>931 X X<strong>MA</strong>921X<strong>MA</strong>911, <strong>MA</strong>941 X X**XXX X XX X XXXX¹⁄₂" (13mm)1²⁵⁄₃₂" (45mm) 1¹⁄₂" (38mm)D1¹⁄₄" (32mm)¹⁹⁄₃₂"(15mm)BCE1¹⁄₈" (28mm)ACache SeulementD¹⁹⁄₃₂" (15mm)³⁄₈" (10mm)¹⁹⁄₃₂" (15mm)Low EdgeBorde inferiorBord inférieurFor Keyed FunctionPara función con chavetaPour la fonction clavetéeTurn Piece ONLYSÓLO pieza giratoriaMembre de cintrage SEULEMENTDrill One Side ONLY!NOT a Thru Hole¡Perfore SÓLO un lado!NO un orificio que traspasePercer un côté SEULEMENT!Perçage partiel seulement8" (203mm)Recess ⁷⁄₃₂" (6mm) DeepEntalladura de 6mm de profundidadRenfoncement de 6 mm de profondeurEscutcheon ONLYEscudo solamenteCache Seulement<strong>MA</strong>12XInside D & E holes should not be thru holes. CAUTION! Do NOT drill thru door!Los orificios internos D y E no deben traspasar la puerta. ¡PRECAUCIÓN! ¡NO perfore la puerta!Les trous intérieurs D et E ne doivent pas être des trous traversants. MISE EN GARDE!* NE PAS percer à travers la porte!E hole should not be a thru hole. CAUTION! Do NOT drill thru door!** El orificio E no debe traspasar la puerta. ¡PRECAUCIÓN! ¡NO perfore la puerta!** Le trou E ne sera qu'un perçage partiel.MISE EN GARDE! NE PAS percer à travers la porte!**Low EdgeBorde inferiorBord inférieurFlat (No Bevel)PlanoPlatHigh EdgeBorde superiorBord inférieurC L1³⁄₄" (44mm) Door1¹⁄₄" x 8" x ⁷⁄₃₂"StandardC L1¹⁄₄" (32mm)High EdgeBorde superiorBord supérieurFlat (No Bevel)PlanoPlatLow EdgeBorde inferiorBord inférieur2³⁄₄" (70mm) BacksetMontaje horizontal de cerraduraLa marge de reculement Outside of DoorLado exterior de la puertaExtérieur de la porte¹⁄₈" (3mm) Wood Door orTap For #12-24 WMS (Metal Door)HolesOrificios1" (25mm) Orifices4¹⁄₂" (114mm) DeepProfundidadProfondeur5⁵⁄₈" (143mm)³⁄₈" (10mm)Low EdgeBorde inferiorBord inférieur6²⁵⁄₃₂" (172mm)¹⁄₈" (3mm) Wood Door orTap For #12-24 WMS (Metal Door)3¹⁄₂" (89mm)1³⁄₈" (35mm)1³⁄₁₆" (30mm)¹⁵⁄₁₆" (24mm)DCE1¹⁄₈" (28mm)A¹⁄₂" (13mm)Right-Handed DoorPuerta con bisagras a la derechaPorte ouvrant à droiteOUTSIDE PREPARATIONPREPARACIÓN DEL EXTERIORA ¹⁹⁄₃₂" (15mm) PRÉPARATION DE L'EXTÉRIEURFunctions DrillFunciónPerforarEscutcheon ONLY FonctionPercerB C D EEscudo solamenteCache Seulement <strong>MA</strong>101, <strong>MA</strong>18X X<strong>MA</strong>301, <strong>MA</strong>311, <strong>MA</strong>321 X X X1¹⁄₄" (32mm)<strong>MA</strong>371, <strong>MA</strong>381, <strong>MA</strong>411,<strong>MA</strong>431, <strong>MA</strong>441, <strong>MA</strong>451,<strong>MA</strong>521, <strong>MA</strong>531, <strong>MA</strong>541,X X XB<strong>MA</strong>551, <strong>MA</strong>561, <strong>MA</strong>571,<strong>MA</strong>581, <strong>MA</strong>621, <strong>MA</strong>641,<strong>MA</strong>851, <strong>MA</strong>881For Keyed FunctionPara función con chavetaPour la fonction clavetéeTurn Piece ONLYSÓLO pieza giratoriaC LMembre de cintrage SEULEMENT StrikeDrill One Side ONLY!³⁄₈"NOT a Thru Hole (10mm) C ¡Perfore SÓLO un lado! LNO un orificio que traspase LockPercer un côté SEULEMENT!Perçage partiel seulementD¹⁹⁄₃₂" (15mm)Escutcheon ONLYEscudo solamenteCache SeulementEscutcheonEscudoCacheOUTSIDE PREPARATIONPREPARACIÓN DEL EXTERIORPRÉPARATION DE L'EXTÉRIEURFunctionsFunciónFonction<strong>MA</strong>101, <strong>MA</strong>18X X X<strong>MA</strong>301, <strong>MA</strong>311, <strong>MA</strong>321 X X X X<strong>MA</strong>371, <strong>MA</strong>381, <strong>MA</strong>411,<strong>MA</strong>431, <strong>MA</strong>441, <strong>MA</strong>451,<strong>MA</strong>521, <strong>MA</strong>531, <strong>MA</strong>541,X X X X<strong>MA</strong>551, <strong>MA</strong>561, <strong>MA</strong>571,<strong>MA</strong>581, <strong>MA</strong>621, <strong>MA</strong>641,<strong>MA</strong>851, <strong>MA</strong>881<strong>MA</strong>911, <strong>MA</strong>921, <strong>MA</strong>931,<strong>MA</strong>941<strong>MA</strong>12**Sectionalseccionalesen coupe<strong>MA</strong>911, <strong>MA</strong>921, <strong>MA</strong>931,<strong>MA</strong>941<strong>MA</strong>12**DrillPerforarPercerA B C D EXXXXXCortarDétacherE hole should not be a thru hole. CAUTION! Do NOT drill thru door!**El orificio E no debe traspasar la puerta. ¡PRECAUCIÓN! ¡NO perfore la puerta!** Le trou E ne sera qu'un perçage partiel.MISE EN GARDE! NE PAS percer à travers la porte!**Detach1" (25mm) Holes, 1¹⁄₈" (29mm) DeepAgujeros de 25 mm,29 mm de profundidadTrous d' 25 mm,d'une profondeur d' 29 mm3³⁄₈" (86mm)³⁄₈" (10mm)2²¹⁄₃₂" (67mm)1¹⁄₄" (32mm)¹⁄₈"(3mm)Recess ³⁄₃₂" (2mm) DeepEntalladura de 2 mm de profundidadRenfoncement de 2 mm de profondeur4⁷⁄₈" (124mm)¹⁄₈" (3mm) Wood Dooror Tap For #12-24WMS (Metal Door)<strong>MA</strong>-<strong>Series</strong> Templatefor Left-Handed DoorPlantilla de la Serie <strong>MA</strong>para puerta que abrehacia la izquierdaGabarit pour séries <strong>MA</strong>pour porte ouvrantà gaucheSectionalseccionalesen coupeOUTSIDE PREPARATIONPREPARACIÓN DEL EXTERIORPRÉPARATION DE L'EXTÉRIEURFunctionsFunciónFonction<strong>MA</strong>101, <strong>MA</strong>18X X<strong>MA</strong>301, <strong>MA</strong>311, <strong>MA</strong>321 X X X<strong>MA</strong>371, <strong>MA</strong>381, <strong>MA</strong>411,<strong>MA</strong>431, <strong>MA</strong>441, <strong>MA</strong>451,<strong>MA</strong>521, <strong>MA</strong>531, <strong>MA</strong>541,X X X<strong>MA</strong>551, <strong>MA</strong>561, <strong>MA</strong>571,<strong>MA</strong>581, <strong>MA</strong>621, <strong>MA</strong>641,<strong>MA</strong>851, <strong>MA</strong>881<strong>MA</strong>911, <strong>MA</strong>921, <strong>MA</strong>931,<strong>MA</strong>941<strong>MA</strong>12**DrillPerforarPercerB C D EXXC L2³⁄₄" (70mm) BacksetMontaje horizontal de cerraduraOutside of Door La marge de reculementLado exterior de la puertaExtérieur de la porte¹⁄₂" (13mm)1¹⁄₂" (38mm)A1¹⁄₄" (32mm)BC¹⁹⁄₃₂" (15mm)Escutcheon ONLYEscudo solamenteCache SeulementLow EdgeBorde inferiorBord inférieur8" (203mm)Flat (No Bevel)PlanoLow EdgePlatBorde inferiorHigh EdgeBord inférieurBorde superiorBord inférieur2³⁄₄" (70mm) BacksetC LMontaje horizontal de cerraduraLa marge de reculement1³⁄₄" (44mm) Door¹⁄₈" (3mm) Wood Door orTap For #12-24 WMS (Metal Door)1¹⁄₄" x 8" x ⁷⁄₃₂"StandardEstándarRéguliers5⁵⁄₈" (143mm)3¹⁄₂" (89mm)Inside of DoorInterior de la puertaIntérieur de la porte1³⁄₈" (35mm)1³⁄₁₆" (30mm)¹⁵⁄₁₆" (24mm)A1¹⁄₄" (32mm)BCLeft-Handed DoorPuerta con bisagras a la izquierdaPorte ouvrant à gauche¹⁹⁄₃₂" (15mm)Escutcheon ONLYEscudo solamenteCache Seulement¹⁄₂" (13mm)Turn Piece ONLYSÓLO pieza giratoriaC LMembre de cintrage SEULEMENT StrikeDrill One Side ONLY! ³⁄₈"NOT a Thru Hole (10mm) C¡Perfore SÓLO un lado! LNO un orificio que traspase LockPercer un côté SEULEMENT!Perçage partiel seulementEscutcheonEscudoCacheINSIDE PREPARATIONEscutcheonEscudo¹⁹⁄₃₂" (15mm)PREPARACIÓN DEL INTERIORCacheEEPRÉPARATION DE L'INTÉRIEUROUTSIDE PREPARATIONFunctions Drill1¹⁄₈" (28mm)1¹⁄₈" (28mm)FunciónPerforarPREPARACIÓN DEL EXTERIORFonctionPercerPRÉPARATION DE L'EXTÉRIEURA B C D E<strong>MA</strong>101, <strong>MA</strong>521, <strong>MA</strong>551,Functions Drill<strong>MA</strong>561, <strong>MA</strong>581, <strong>MA</strong>851, X X XFunciónPerforarDD<strong>MA</strong>881, <strong>MA</strong>18FonctionPercerA B C D E<strong>MA</strong>161*X X¹⁹⁄₃₂"<strong>MA</strong>101, <strong>MA</strong>18X X X(15mm)<strong>MA</strong>301, <strong>MA</strong>311, <strong>MA</strong>321,Recess ⁷⁄₃₂" (6mm) Deep<strong>MA</strong>451, <strong>MA</strong>531, <strong>MA</strong>541, X X X X<strong>MA</strong>301, <strong>MA</strong>311, <strong>MA</strong>321 X X X X<strong>MA</strong>571, <strong>MA</strong>621, <strong>MA</strong>641Entalladura de 6mm de profundidad<strong>MA</strong>371, <strong>MA</strong>381, <strong>MA</strong>411,Renfoncement de 6 mm de profondeur<strong>MA</strong>371, <strong>MA</strong>381, <strong>MA</strong>411,AAX X X X<strong>MA</strong>431, <strong>MA</strong>441, <strong>MA</strong>451,<strong>MA</strong>431, <strong>MA</strong>441<strong>MA</strong>521, <strong>MA</strong>531, <strong>MA</strong>541,X X X X<strong>MA</strong>551, <strong>MA</strong>561, <strong>MA</strong>571,¹⁹⁄₃₂" (15mm)¹⁄₈" (3mm) Wood Door or¹⁹⁄₃₂" (15mm)<strong>MA</strong>931 X X<strong>MA</strong>581, <strong>MA</strong>621, <strong>MA</strong>641,<strong>MA</strong>851, <strong>MA</strong>881Tap For #12-24 WMS (Metal Door)<strong>MA</strong>921XEscutcheon ONLYEscutcheon ONLY<strong>MA</strong>911, <strong>MA</strong>921, <strong>MA</strong>931,X XC L³⁄₈" (10mm)<strong>MA</strong>941Escudo solamente<strong>MA</strong>911, <strong>MA</strong>941 X XEscudo solamente<strong>MA</strong>12**XCache Seulement1¹⁄₄" (32mm)Cache Seulement <strong>MA</strong>12**X** <strong>MA</strong>12 trim is for one side only (inside or outside). E hole should not be a thru hole. Low EdgeInside D & E holes should not be thru holes. CAUTION! Do NOT drill thru door!CAUTION! Do NOT drill thru door!Borde inferiorHigh EdgeLos orificios internos D y E no deben traspasar la puerta. ¡PRECAUCIÓN! ¡NO perfore la puerta!** El recorte <strong>MA</strong>12 es sólo para un lado (interior o exterior).Bord inférieurBorde superiorLes trous intérieurs D et E ne doivent pas être des trous traversants. MISE EN GARDE!*Bord supérieurNE PAS percer à travers la porte!El orificio E no debe traspasar la puerta. ¡PRECAUCIÓN! ¡NO perfore la puerta!Low Edge E hole should not be a thru hole. CAUTION! Do NOT drill thru door!** La garniture <strong>MA</strong>12 est à côté unique (intérieur ou extérieur).Flat (No Bevel)**Borde inferior El orificio E no debe traspasar la puerta. ¡PRECAUCIÓN! ¡NO perfore la puerta!Le trou E ne sera qu'un perçage partiel.Plano**Bord inférieurLe trou E ne sera qu'un perçage partiel.MISE EN GARDE! NE PAS percer à travers la porte!MISE EN GARDE! NE PAS percer à travers la porte! Plat**1²⁵⁄₃₂" (45mm)For Keyed FunctionPara función con chavetaPour la fonction clavetéeTurn Piece ONLYSÓLO pieza giratoriaMembre de cintrage SEULEMENTDrill One Side ONLY!NOT a Thru Hole¡Perfore SÓLO un lado!NO un orificio que traspasePercer un côté SEULEMENT!Perçage partiel seulementD³⁄₈" (10mm)HolesOrificios1" (25mm) Orifices4¹⁄₂" (114mm) DeepProfundidadProfondeur6²⁵⁄₃₂" (172mm)DFor Keyed FunctionPara función con chavetaPour la fonction clavetéeSectionalseccionalesen coupeINSIDE PREPARATIONPREPARACIÓN DEL INTERIORPRÉPARATION DE L'INTÉRIEURFunctions DrillFunciónPerforarFonctionPercerB C D E<strong>MA</strong>101, <strong>MA</strong>521, <strong>MA</strong>551,<strong>MA</strong>561, <strong>MA</strong>581, <strong>MA</strong>851, X X<strong>MA</strong>881, <strong>MA</strong>18<strong>MA</strong>161*<strong>MA</strong>301, <strong>MA</strong>311, <strong>MA</strong>321,<strong>MA</strong>451, <strong>MA</strong>531, <strong>MA</strong>541,<strong>MA</strong>571, <strong>MA</strong>621, <strong>MA</strong>641<strong>MA</strong>371, <strong>MA</strong>381, <strong>MA</strong>411,<strong>MA</strong>431, <strong>MA</strong>441<strong>MA</strong>931<strong>MA</strong>921<strong>MA</strong>911, <strong>MA</strong>941<strong>MA</strong>12**XXX X XX X XXXXCortarDétacherDetach1" (25mm) Holes, 1¹⁄₈" (29mm) DeepAgujeros de 25 mm,29 mm de profundidadTrous d' 25 mm,d'une profondeur d' 29 mm3³⁄₈" (86mm)³⁄₈" (10mm)2²¹⁄₃₂" (67mm)1¹⁄₄" (32mm)¹⁄₈"(3mm)¹⁄₈"(3mm)Recess ³⁄₃₂" (2mm) DeepEntalladura de 2 mm de profundidadRenfoncement de 2 mm de profondeur4⁷⁄₈" (124mm)(800) 847-1864©2010 Schlage Lock Co.Printed in CountryQ513-068 Rev. 6/10-a49
Ingersoll Rand’s Security Technologies Sector is a leading global provider of products and services that make environmentssafe, secure and productive. The sector’s market-leading products include electronic and biometric access-control systems;time-and-attendance and personnel scheduling systems; mechanical locks; portable security; door closers, exit devices,architectural hardware, and steel doors and frames; and other technologies and services for global security markets.800.847.1864www.falcon.ingersollrand.com©2010 Ingersoll Rand Company FA-5885 Rev. 6-10 Printed in U.S.A.
Change language