AID - Franklin Electric Europa

9. After InstallationA. Check all electrical and water line connections and parts before starting the pump.B. Switch on main electrical power switch. Start the pump and check the motor amps and pumpdelivery. If normal, continue to run the pump until delivery is clear. If three phase pump deliveryis low, it may be running backward. Rotation can be reversed (with power off) by interchangingany two motor lead connections to the power supply.C. Check three phase motors for current balance within 5% of average. Higher imbalance willcause higher motor temperatures and may cause overload trip, vibration and reduced life.D. Verify that starting, running and stopping cause no significant vibration or hydraulic shocks.E. After at least 15 minutes running time, verify that pump output, electrical input, pumping leveland other characteristics are stable and as specified.For best electrical protection: Set motor protection (Submonitor or overload relay) close to dutypoint operation amps.The Franklin AID has been published since January 2003. In case you have not received alleditions, please contact our Field Service Department at field-service@franklin-electric.de andwe will send you the required edition. Attached you will find a listing of all subjects published upuntil today.Seminars in 2010:Please check our website http://www.franklin-electric.de/de/training.aspand sign up for it.Upon request we offer specific seminars tailored to your needs.The Franklin Electric Service Team wishes “Merry Christmas” andgood success with Franklin products in 2010