High Resistance Decade M-109R - meatest.cz

More documents

Recommendations

Info

3 W Resistance calibrationLED indicatedmaximum input voltageLED indicatedswitching the decade on1.Press ON/OFF button2.Set requested value usingindividual rotary buttonsSimple connection three -terminal calibration of UUTs:* Connect UUT input to the resistance decade 2W outputand ground terminals* Set requested value
High Resistance Decade!!! WARNING !!!Before using the resistance decade, follow these instructions:1. Check the quality of connection betwen terminals H, L.2. Check the pre-defined resistance value relative to the valueof applied voltage.3. When measuring and manipulating rotary buttons, workwith maximum caution-you are working with high voltage.4. Connect measuring voltage only for the necessary time.5. It is not allowable to leave the resistance decadeunsupervised when measuring voltage is connected.6. Before manipulation with measuring cables, checkswitching off of test voltage source.!!! If you are not absolutely sure aboutthe safety of the connection, do nottouch operating elementsor the instrument shield. !!!
Page 2 and 3: Basic technical dataHigh Resistance
Page 4 and 5: Rear panel with interfaceRS-232 int
Page 9: Ordering information - optionsHigh

High Resistance Decade M-109R - meatest.cz

Create successful ePaper yourself

Delete template?

Save as template?