mCERTs BÜHLER 4010 stationary sampler - HACH LANGE

PRODUCT INFORMATIONSAMPLERSTATIONARYBÜHLER 4010NEW!Optional: BÜHLER 4010 ex model inATEX Zone 2 configurationmCERTs BÜHLER 4010stationary sampler Stainless steel housing(optional: plastic-coatedstainless steel) Strict separation of controland sample sections Composite andfractionated samples BUS and GSMcommunicationThe factsThe BÜHLER 4010 stationary sampleris ideal for use in sewage treatment andindustrial facilities and for monitoringsurface waters.The sampler functions according to thepressure-vacuum principle and operatesin time, volume, flow or event-basedmode.The different dosage vessels make theinstrument extremely flexible in standardand individual applications.The temperature-controlledweatherproof V2A housing is optionaland available in V4A and plastic-coatedstainless steel. The strict separation ofthe control and sample sections ensuresthat the instrument has a long life.The BÜHLER 4040 ex is a variantof the 4010. It is certified for use inATEX zone 2 environments and can beinstalled in locations such as enclosedscreening houses or in the vicinity ofdigestion tanks.

STATIONARY SAMPLER_BÜHLER 4010Technical dataSampling principle Pressure-vacuum principleSample volume 20–350 ml (optional: 20–500 ml)Sample containers Plastic (PE): 1 x 25 l 1 , 1 x 50 l 1 , 2 x 10 l, 2 x 22 l, 4 x 6 l, 4 x 10 l 1 ,( 1 also model 4040 ex) 4 x 14 l 1 , 4 x 20 l, 4 x 25 l, 12 x 2,9 l 1 , 24 x 1,0 l, 24 x 2,9 lGlass: 12 x 2 l 1 , 24 x 1 l, 24 x 2 lSample lift height Max. 8 m (at 1,013 hPa); pump output electronically adjustableSuction rate0.5 m/s for sample lift height of max. 7.8 m (at 1,013 hPa); pumpoutput electronically adjustableSuction tubing 7.5 m PVC tube (12 mm ID; optional: 16 mm for flow-based mode)Bottle filling time 1 min. to 999 h 59 min.Dosage pause 1 min. to 99 h 59 min.SamplingTime, volume and event-based and manual sampling; flow-basedsampling (optional, only model 4010)Manual sampling Possible at any time, without interfering with the program sequence.Volume accuracy 2.8 % (95 % confidence interval) with standard vacuum systemSample distributor Round distributorDosage systems 1. Standard vacuum system 20–350 ml (optional: 20–500 ml)2. Vacuum flow-based system 20-350 ml (optional, only model 4010)3. Bypass system 20-250 ml (optional, only model 4010)Signal inputs 1 × analogue: 4–20 mA, optional 0–20 mA, cut-off voltage 3.3 V5 × digital: (volume, event, 3 x freely programmable)Signal outputs Depending on model, up to 8 x digital (freely programmable)Programs6 user-defined sampling programs (freely programmable)LanguagesChoice of several languagesCommunication PROFIBUS and MODBUS provided, GSM optionalStatus messages Collective error message (standard)Sampling, program active and program end messages (optional)Temperature control Independently regulated cooling and heating with 4 settingsTemperature of sampler section: 4 °C (adjustable from 0.0–9.9 °C)Power requirement 230 V / 115 V, 350 VA (with cooling), fusing at least 10 ALabellingModel 4040 ex: Ex II 3G EEx nC/R/L IIB T3HousingDouble-walled stainless steel V2A (material 1.4301 / SS304) with40 mm insulation, 2 lockable doors, top door with inspection window,protective heating in top section, protective cover (Styrosun) which canbe fitted for connection and maintenance work.Optional housing in V4A stainless steel (material 1.4571 / SS316Ti) andepoxy-coated V2A/V4A stainless steel.Ambient temperature -20 to +43 °CSample temperature +0.1 to +40 °CDimensions 1,290 (*1,882) × 710 × 660 mm for 1 × 25 l, 1 × 50 l, 2 × 10 l,(H × W × D) 2 × 20 l, 4 × 6 l, 4 × 14 l, 12 × 2 l, 12 × 4,9 l, 24 × 1 l bottles(*with cover in place) 1,390 (*2,175) × 840 × 820 mm for 4 × 20 l, 4 × 25 l, 24 × 2,9 l,24 × 2 l bottlesModel 4040 ex: 1,490 (*2,106) × 690 × 645 mmWeightAbout 100 kg with composite sample container (depending on type of bottle)Optional accessories Mobile model, interior lighting, V2A base frame, intake device and muchmoreSubject to change.BÜHLER 4040 ex model inATEX Zone 2 configurationRepresentative samples inconformity with ISO 5667Pressure-vacuum samplersare ISO 5667 compliant andtherefore satisfy the requirementsfor subsequent reproducibleanalysis. Until then the sample isrefrigerated to exclude biological andchemical changes. To avoid crosscontamination,the systems are rinsedbefore and after each sample is taken.HACH LANGE ServicesContact us to place an order,request information or receivetechnical support.Service packages and extendedwarranty up to 5 years.DOC063.52.03821.Jan09HACH LANGE MAROC SARLAUVilla 14 – Rue 2 Casa PlaisanceQuartier Racine ExtensionMA-Casablanca 20000Tél. +212 (0)522 97 95 75Fax +212 (0)522 36 89 34info-maroc@hach-lange.comwww.hach-lange.maTél. +212 (0)522 97 95 75