DEWETRON Data Acquisition Solutions - Dewetron America
DEWETRON Data Acquisition Solutions - Dewetron America
DEWETRON Data Acquisition Solutions - Dewetron America
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DEWE-101 Configuration guide<br />
The DEWE-101 is a complete package - just add a display of some kind (or operate it from your notebook computer).<br />
The inputs and powerful A/D system are built-in, and DEWEsoft software is installed and ready to run. Just plug it into<br />
DC power (or the Neutrino as shown at the bottom of this page) and go. The only accessories usually needed are our<br />
MsI multiple sensor interfaces. These inexpensive accessories plug in to each of the 8 analog inputs, converting them<br />
to a different type of signal or sensor. Other accessories are available, as shown on the opposite page and the bottom<br />
of this page.<br />
MSI adapters for IEPE,<br />
charge, thermocouples,<br />
RTDs, etc.<br />
Do you need any factory<br />
installed upgrades? More<br />
RAM? Bigger HDD? etc.<br />
1<br />
2<br />
For in-vehicle applications where you need<br />
complete isolation from vehicle power, we<br />
recommend the DEWE-DCDC-24-300-ISO.<br />
This DC/DC power supply provides a wide<br />
range (-10-30 VDC) ISOLATED DC power<br />
input!<br />
EPAD2-TH8<br />
Neutrino-4 - Portable power supply/UPS<br />
The optional NEUTRINO-4 battery power supply<br />
The Neutrino-4 can power<br />
the DEWE-101 for about<br />
8 hours with 4 batteries<br />
(BAT-95WH) installed. A<br />
convenient LCD shows the<br />
battery status at all times,<br />
but the best news is that<br />
you can HOT sWAP the batteries,<br />
even when the system<br />
is running from them!<br />
In this way, you could run<br />
the system indefinitely from<br />
batteries. With the Neutrino<br />
and the DEWE-101, you<br />
truly have a portable system<br />
which can work all day,<br />
and never be connected to<br />
external power.<br />
3<br />
CPAD2-TH8<br />
How about a camera to add<br />
synchronous video to your<br />
recordings?<br />
You can add EPAD2 or CPAD2<br />
external temperature modules<br />
to any <strong>Dewetron</strong> system<br />
4<br />
EPAD2 modules connect to the<br />
EPAD port on the back of the<br />
DEWE-101. NEW! CPAD2 modules<br />
can daisy-chain to either of<br />
the CAN BUS interfaces on the<br />
front of the DEWE-101! Both are<br />
available in J, K, or T types.<br />
The 101-DISP is a mobile display<br />
that runs from 12VDC, and is 10.2,<br />
1024x768 pixels, and has a built-in<br />
4-wire resistive touchscreen display!<br />
DEWE-101<br />
PORTABLE MINITAUR / DEWE-101 sERIEs<br />
3