Operating instructions - EWM Hightec Welding GmbH

Design and functionCooling module assembly/disassembly12Figure 5-3• Turn the wing-tip handle clockwise (B2) to close the fastening.• Engage the locking hook in the recesses in the side walls of the welding machine.12Figure 5-4• Lay the wing-tip handle down flat (C2).5.3.2 Cooling module disassembly• Lift the wing-tip handle and turn anti-clockwise until the locking hook is extended.• Lift the locking hook out of the recesses on the welding machine.• The welding machine can be lifted off the cooling unit.099-008091-EW50111.11.201119