view installation note - Pertronic Industries Ltd

1. Detector Connections - Non-Encapsulated:2. Detector Connections - Encapsulated:Encap Ind Heat 20080507+Fire AlarmPanelMRedBlackBlac kRedEns ure the 'M' cable is separated and NOT twisted together at e ach detector input.Failure to com ply m ay m ean the loss of a de tector is no t detectedRedBlackBlackRed10k EOL3. Detector Connections - Indicating Heat Detector Kit:Overview: Pertronic Indicating Heat Detector Kits are available in a variety oftemperature settings to allow placement in very low or very high temperatureenvironments.Encapsulated Heat Sensor Unit: Available in four temperature settings:○ Blue: encapsulated 57 0 C thermo-mechanical sensor element○ Yellow: encapsulated 77 0 C thermo-mechanical sensor element○ Green: encapsulated 93 0 C thermo-mechanical sensor element○ Black: encapsulated 125 0 C thermo-mechanical sensor element Fire rated cable connection to Alarm Indication UnitAlarm Indication Unit: Terminals accept up to 1.5mm 2 cable. Bi-directional circuit connection terminals. Either ‘Red’ terminal may beconnected to the fire panel. Red LED indication latches on activation of the thermo-mechanical sensorelement. The LED is reset by de-powering the detector. Note: the Alarm Indication Unit must be installed remotely from theEncapsulated Heat Sensor Unit.Encapsula ted Heat Sensor Unit:In sta l l e d Insi d e theExtreme Temperature AreaAlarm Indication UnitsIn stal l e d Insi d e th eAmbient Temperature AreaThermo-MechanicalSensor Element:'Blue' (57ºC)'Yellow' (77ºC)'Green' (93ºC)'Black' (1 25ºC)Extreme Temperature AreaAmbient Temperature Area3m Fire-Rated CableL ED IndicatorLED IndicatorFire AlarmPanelMEnsure the 'M' cable is s eparated and NOT tw isted together.Failure to comply may mean the loss of a dete ctor is not de tectedPERTRONIC INDUSTRIES LTD 2 of 4 0721-Indicating Heat Detector Issue 5 200805 PERTRONIC INDUSTRIES LTD 3 of 4 0721-Indicating Heat Detector Issue 5 200805+RedRedBlackRedRedBlack10k EOLInd Heat Det Kit 20080509