Joining - The Welding Alloys group

Welding of highly alloyed steelsTETRA S TETRA S B TETRA V TUBE SWelding processSlagFCAW FCAW FCAW FCAW or SAWRutile slow freezing Basic Rutile fast freezing Metal coredWelding positionsAll positionsAll positions ** Please refer to your local Welding Alloys techniciansBy courtesy of Welders NVDetailed operating conditions: see page 26Product name Process StandardEN ISO Composition Mechanical propertiesDescription and applications Base materialO: open arc diameters- Fe balanceG: gas shielded [mm]ASME / AWSS: sub arcstandardsRm Rp 0.2% A5KvTypeGrade[MPa] [MPa] [%][J]Austenitic stainless steels1.2 to 2.8TETRA S308LG0.9 to 1.6T 19 9 L R M21 3 (C1 3)E308LT0-1/-4620 460 36 -196 o C: 32TETRA S BTETRA V308L308LGG1.2 and 1.60.9 to 1.2T 19 9 L B M21 3E308LT0-4T 19 9 L P M21 1 (C1 1)E308LT1-1/-4C: 0.030Mn: 1.40Si: 0.70Cr: 20.0Ni: 10.5560 390 40 -196 o C: 40620 460 36 -196 o C: 34• Austenitic deposit in CrNi steel - type 308L• Joining of low carbon steels and/or stabilised steels withsimilar compositions, resistant to corrosion• Service temperatures from -196°C to +350°C(1.4306) X2CrNi19-11, (1.4301) X5CrNi18.10,(1.4311) X2 CrNiN18-10, (1.4312) GX10CrNi18-8.AISI 304-304L-304LN-302-321-347;ASTM: A157 Gr C9, A320 Gr B8C or DTUBE S308LG/S1.2 to 2.4T 19 9 L M M12 1EC308L600 430 40 -196 o C: 35TETRA STETRA VTUBE S347L347L347LGGG/S1.2 and 1.61.21.2 to 2.4T 19 9 Nb R M21 3 (C1 3)E347T0-1/-4T 19 9 Nb P M21 1 (C1 1)E347T1-1/-4T 19 9 Nb M M12 1EC347C: 0.030Mn: 1.40Si: 0.90Cr: 19.5Ni: 10.5Nb: 0.50660 470 35 -196 o C: 34660 470 35 -196 o C: 34620 430 35 -196 o C: 35• Austenitic deposit in CrNiNb steel - type 347• Joining of Ti or Nb stabilised steels of similar composition,resistant to corrosion• Weld overlaying of clad plates of the same orsimilar compositions• Service temperatures from -196°C to +400°C(1.4550) X6CrNiNb18-10, (1.4541) X6CrNiTi18-10,(1.4552) GX5CrNiNb19-11, (1.4311) X2 CrNiN 18.10,(1.4301) X5CrNi18-10, (1.4546) X5CrNiNb 18-10;AISI 347-321-302-304, ASTM A296 Gr.CF 8 C, A157Gr. C9;A320Gr. B8C or DTETRA S 316L G0.9 to 1.6TETRA S B 316LTETRA V 316LTUBE S316LG1.2 and 1.6G0.9 to 1.2G/S1.2 to 2.4T 19 12 3 L R M21 3 (C1 3)E316LT0-1/-4T 19 12 3 L B M21 3E316LT0-4T 19 12 3 L P M21 1 (C1 1)E316LT1-1/-4T 19 12 3 L M M12 1EC316LC: 0.030Mn: 1.40Si: 0.80Cr: 19.0Ni: 12.0Mo: 2.90600 490 32 -110 o C: 35550 430 40 -110 o C: 50600 490 32 -110 o C: 35610 450 35 -110 o C: 35• Austenitic deposit in CrNiMo steel – type 316L – resistant tointercrystalline corrosion under humid conditions up to 400°C.• Joining of low-carbon or stabilised steels with similarcompositions• Weld overlaying of clad plates of the same orsimilar compositions• Service temperatures from -110°C to +400°C(1.4401) X5CrNiMo17-12-2,(1.4404) X2CrNiMo17-12-2, (1.4435) X2CrNiMo18-14-3,(1.4436) X3CrNiMo17-13-3, (1.4571) X6CrNiMoTi17-12-2,(1.4580) X6CrNiMoNb17-12-2,(1.4583) X10CrNiMoNb18-12, (1.4409) GX2CrNiMo19-11-2;UNS S 31603, 31600, 31653, AISI316L, 316Ti, 316Cb316NFL G1.2 and 1.6 T 18 16 5 N L ZB M21 3-C: 0.030Mn: 3.00Si: 0.25Cr: 19.5Ni: 16.5Mo: 4.00N: 0.10TETRA S B 600 420 40 +20 o C: 70• Austenitic deposit in CrNiMo steel - type 316L, over-alloyed• Joining of low-carbon CrNiMo steels, resistant to localised,intergranular and stress corrosion, in chloride-containing media• Ferrite free deposit• Service temperatures from -110°C to +350°C(1.4439) X2 CrNiMoN 17-13-5, (1.4438) X2CrNiMo 18-16-4, (1.4436) X3CrNiMo17-13-3,(1.4583) X10CrNiMoNb18-12;AISI 316Cb-316LN-317LN-317L, UNS S 3172614 15 Joining