ABS6....ABS10 Maximun Ratings and Electrical ... - Fagor Electrónica

ABS6....ABS101.0 Amp. Miniature Single Phase Glass Passivated Surface Mount Bridge RectifierTHIN MINI-DIPVoltage600 V to 1000 VMaximun Ratings and Electrical Characteristics at 25°CV RRMV RMSV DCI F(AV)I FSMR th (j-l)R th (j-a)T jT stgCurrent1.0 AFEATURES• Saves space on printed circuit boards• Ideal for automated placement• High surge current capability• Solder dip 260ºC, 10s• Component in accordance to RoHS 2011/65/EUand WEEE 2002/96/EC• Meets MSL level 1, per J-STD-020, LF maximumpeak of 260º C• Halogen-free available according to IEC 61249-2-21definitionMECHANICAL DATA• Case: THIN MINI-DIP. Epoxy meets UL 94V-0flammability rating.• Polarity: As marked on body.• Terminals: Matte tin plated leads, solderable perMIL-STD-750 Method 2026, J-STD-002 and JESD22-B102.Consumer grade, meets JESD 201 class 1A whisker test.TYPICAL APPLICATIONSUsed in general purpose ac-to-dc bridge full wave rectificationfor power supply, lighting ballaster, Battery charger, homeappliances, office equipement, and telecommunicationapplications.ABS6 ABS8 ABS10Marking Code ABS6 ABS8 ABS10Halogen Free Marking CodeABS6 HFABS8 HF ABS10 HFMaximum Recurrent Peak Reverse Voltage (V)Maximum RMS Voltage (V)Maximum DC Blocking Voltage (V)Maximum average Forward Rectified CurrentOn glass-Epoxy P.C.B.6004206008005608000.8 A10007001000On aluminum substrate1.0 APeak Forward Surge Current, 8.3 ms SingleHalf Sine-wave Superimposed on Rated30 ALoad (JEDEC method)Typical Thermal Resistance Junction to Lead25 °C/WOn aluminum substrate62.5 °C/WOn Glass-Epoxy substrate80 °C/WOperating Temperature Range-50 to + 150 °CStorage Temperature RangeElectrical Characteristics at Tamb = 25 °CMaximum Instantaneous Forward Voltage @ 0.4AV FMaximum DC Reverse Current @ T A = 25 °CI Rat Rated DC Blocking Voltage @ T A = 125 °C-50 to + 150 °C0.95 V10 µA150 µAwww.fagorelectronica.comDocument Name: absVersion: Oct-12Page Number: 1/4

ABS6....ABS101.0 Amp. Miniature Single Phase Glass Passivated Surface Mount Bridge RectifierOrdering informationPREFERRED P/N PACKAGE CODE DELIVERY MODE BASE QUANTITY UNIT WEIGHT (g)ABS6 TRABS10 HF TRTR 13" diameter tape and reel 5,000 0.12TR 13" diameter tape and reel 5,000 0.12Package Outline Dimensions: (mm)THIN MINI-DIP1.421.225.14.91.5 MAX.A0.150.050.850.65A 10:1Mounting Pad Layout1.16.464.54.30.70.6MCWWY3.453.254.13.90.150.050.70.3Marking codeYear codeWeek code0.250.150~10°41.15.6www.fagorelectronica.comDocument Name: absVersion: Oct-12Page Number: 2/4

ABS6....ABS101.0 Amp. Miniature Single Phase Glass Passivated Surface Mount Bridge RectifierRatings and Characteristics (Ta 25 ºC unless otherwise noted)IF(AV), average forward current (A)1.61.41.210.80.60.4MAXIMUM FORWARD CURRENT DERATINGCURVE0.200 20 40 60 80 100 120 140 160T L , lead temperature (°C)IF(AV), average forward Current (A)MAXIMUM FORWARD CURRENT DERATINGCURVE1.61.41.2Alumina substrateSIN50.8 mm x 50.8 mm1.0Soldeering lang 1 mm x 1mmConductor layer 20 µm0.8Substrate thickness 0.64mm0.60.40.200 20 40 60 80 100 120 140 160Tamb, ambient temperature (°C)IF, instantaneous forward current (A)5020105210.50.2TYPICAL FORWARD CHARACTERISTIC(PER DIODE)T j = 150 °C (Typ)T j = 25 °C (Typ)0.10 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6V F , forward voltage (V)IFSM, peak forward surge current (A)40353025201510501MAXIMUM NON-REPETITIVE FORWARDSURGE CURRENTI FSM10 ms10 ms1 CycleNon-repetitiveSine wave,Tj = 25°C BeforeSurge current is applied10Number of cycles (Cycle)100Forward power dissipation (W)2.521.510.500FORWARD POWER DISSIPATIONSIN0.2 0.4 0.6 0.8 1 1.2I F(AV) , average forward current (A)Instantneous reverse current (µA)1010.1TYPICAL REVERSE CHARACTERISTICSTA=75ºCTA=150ºCTA=100ºCTA= -55ºCTA=25ºC0.010 20 40 60 80 100 120 140Percent of rated peak reverse voltage (%)Junction Capacitance (pF)TYPICAL JUNCTION CAPACITANCE (1MHz)1000100TA=25°C100.1 1 10 100 1000Reverse Voltage (V)www.fagorelectronica.comDocument Name: absVersion: Oct-12Page Number: 3/4

ABS6....ABS101.0 Amp. Miniature Single Phase Glass Passivated Surface Mount Bridge RectifierDisclaimerAll product, product specifications and data are subject to change without notice to improve reliability,function or design or otherwise.Fagor Electrónica, S.Coop., its affiliates, agents, and employees, and all persons acting on its or theirbehalf (collectively, "Fagor"), disclaim any and all liability for any errors, inaccuracies or incompleteness containedin any datasheet or in any other disclosure relating to any product.Fagor makes no warranty, representation or guarantee regarding the suitability of the products for any particularpurpose or the continuing production of any product. To the maximum extent permitted by applicable law,Fagor disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and allliability, including without limitation special, consequential or incidental damages, and (iii) any and all impliedwarranties, including warranties of fitness for particular purpose, non-infringement and merchantability.Statements regarding the suitability of products for certain types of applications are based on Fagor's knowledgeof typical requirements that are often placed on Fagor products in generic applications. Such statements are notbinding statements about the suitability of products for a particular application. It is the customer's responsibilityto validate that a particular product with the properties described in the product specification is suitable for use in aparticular application. Parameters provided in datasheets and/or specifications may vary in different applicationsand performance may vary over time. All operating parameters, including typical parameters, must be validatedfor each customer application by the customer's technical experts. Product specifications do not expand orotherwise modify Fagor's terms and conditions of purchase, including but nos limited to the warranty expressedtherein.Except as expressly indicated in writing. Fagor products are not designed for use in medical, life-saving, orlife-sustaining applications or for any other application in which the failure of the Fagor product could result inpersonal injury or death. Customers using or selling Fagor products not expressly indicated for use in suchapplications do so at their own risk and agree to fully indemnify and hold Fagor and its distributors harmless fromand against any and all claims, liabilities, expenses and damages arising or resulting in connection with such useor sale, including attomeys fees, even if such claim alleges that Fagor or its distributor was negligent regardingthe design or manufacture of the part. Please contact authorized Fagor personnel to obtain written terms andconditions regarding products designed for such applications.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by thisdocument or by any conduct of Fagor, Product names and markings noted herein may be trademarks of theirrespective owners.www.fagorelectronica.comDocument Name: absVersion: Oct-12Page Number: 4/4