Download - Mega-UK - Mega Electronics

CORNERROUNDERES420 Corner RounderAn inexpensive invaluable tool to meet the demand for aquick corner rounding facility for plastic/metal labels andfront panels. The table is effectively split into two halves,each containing 90 degree stops, in the angle of each is ahardened radius of either 6mm or 4mm. The punch hasbeen ground to simultaneously marry both of theserounds when driven down by the cam actioned handle.The material to be rounded is slid from the left or righthand side positively into the stops, to leave an overhangwhich is sheared through by the punch to leave a cleancorner of either 6mm or 4mm radius.It should be noted that material originally cut out ofsquare will result in an unbalanced round being removed.The table support column is mounted on a 5" × 5" steelplate with screw holes for bench fixing, although this willprobably be unnecessary for most users.Overall height with handle upright 8" (205mm)and weight 1.2Kg.Order Code700-007 ES420 Corner RounderPriceSMALLPCBDRILLINGMACHINEEconomicalDrilling SystemDM403 - High Speed PCB DrillA 240v AC drill ideal for drilling PCBs with a variablespeed control for speeds between 10,000 - 33,000 rpm.It features a sturdy shatter proof nylon housing and adependable sleeve bearing 125 Watt motor and ballbearing driven shaft. A 1/8th" collet is fitted.Weight 450g.DM405D Drill StandA drill stand to fit the Dremel drill. It has a robust armcontaining an adjustable aperture in which the drill is heldvertically. The arm slides against springs on two pillarsfixed rigidly to a base plate of 230 × 150mm. Drill pillarscan be switched to offer right or left handed use.Dremel Drilling StationDM410 Dremel Drilling StationA complete drilling station consisting of a DM403variable speed Dremel drill, a Dremel Drill Stand andthree tungsten carbide drill bits.26Order Code700-014 DM403 Variable Speed Dremel700-305 DM405D Dremel Drill Stand700-307 DM410 Dremel Drilling StationPrice