Last updated: 29 Jul 2013 - RedBookLive

Last updated: 18 Jan 2014

VOLUME 1 LIST OF APPROVED PRODUCTS AND SERVICESLPCB is widely recognised as an independent reference for all fire and security safety experts. Their testinglaboratories and approvals services together with their leading team of highly qualified expert scientists andengineers, guides us all impeccably towards a qualified framework.Major General Rashid Thani Al MatrooshiIntroductionWelcome to the 2014 Edition of the “LPCB Red Book”, the list of approved products and services from LPCB.LPCB is the fire and security approval brand of BRE Global Ltd. which is part of the BRE Group operatingunder the BRE Trust. It is an independent third party approvals body offering certification of fire and securityproducts and services to an international market. The LPCB mark and listings signify that products andservices have been approved by LPCB. The Red Book is an essential reference for specifiers, regulators,designers and end users of these products and services - if it is listed here, you know it has been checked outby people you can trustBRE Global also offers independent approval of construction products, management systems and in the areaof sustainability though its BRE Global Certification and BREEAM brands. Where these have relevance to firesafety and security these are also listed in the Red Book (The details of these schemes are given in therelevant introductory sections.)BRE Global Ltd is also a Notified Body for the purpose of CE marking and European Technical Assessment inconnection with the European Construction Product Regulation (CPR) and other European Directives; thePressure Equipment Directive (PED), Marine Equipment Directive (MED) and Transportable PressureEquipment Directive (TPED).BRE Global - protecting people, property and the planet.The Red Book is divided into sections which list related groups of products and services such as suppression,security and so on. Each section also summarises the technical basis for the approval of each product orservice. The Red Book should always be used in conjunction with rules, regulations and design specificationsrequired by the relevant Authority having jurisdiction.The 2014 edition of the Red Book comprises:18 Jan 2014 iii

VOLUME 1 LIST OF APPROVED PRODUCTS AND SERVICESVolume 1: (This Volume) Fire detection and alarm products, systems, and cables Manual fire extinguishing equipment Automatic sprinkler, water spray and deluge systems Fixed fire fighting products and systems Related installersVolume 2: Passive fire protection products Security protection products Fire doors and shutters Smoke and fire ventilation systems Related installers Management Systems Construction productsListings are given in the name of the manufacturer or service provider, in alphabetical order. They can bedownloaded free of charge from our website at www.redbooklive.com and also via an App that is availablefree from Apple iStore (for iPhone and iPad), from Google Play, (for Android phones and tablets) andWindows Store (for Windows 8 phones).Red Book updatesProduct and services approval details are amended regularly. To ensure that you are using the most up todate information please refer to www.redbooklive.com or download the App.What is Third Party Approval?A frequent concern of stakeholders is in knowing whether a product will perform in accordance with the statedspecifications. These concerns can involve such product attributes as safety, health or environmental impacts,durability, compatibility, suitability for intended purposes or for stated conditions, and other similarconsiderations. These issues can all be addressed through product approvals.Third party approval (or certification) is a conformity assessment process, carried out by a body that isindependent of both supplier and customer organisations. It provides confirmation that products and serviceshave met and will continue to meet the requirements of specified standards and other normative documents.LPCB third party product approval schemes are quality assurance schemes and comprise initial type testingand technical evaluation, assessment and surveillance of the manufacturer’s quality system and productionprocedures, regular audit testing, labelling and listing.Similarly, LPCB schemes for suppliers of services (installers) are also quality assurance schemes comprisinga technical assessment of an installer’s capability, assessment and surveillance of the installer’s qualitysystem and production procedures, regular inspection of completed installations and listing.Benefits of Third Party ApprovalFor specifiers, regulators, insurers, manufacturers and installers, the benefits of an LPCB approval are:For specifiers and regulators:iv 18 Jan 2014

VOLUME 1 LIST OF APPROVED PRODUCTS AND SERVICESRisk reduction - specifying LPCB approved products and services demonstrates due-diligence andbest endeavour and mitigates against possible accusations of negligence.Avoidance of costly mistakes - you can trust LPCB approved products and services to conform eachand every time.Time - using Red Book Live to search for and assess products and services can save you time.For manufacturers and installers: Increased global sales - LPCB approval is recognised and specified widely throughout the world. Insome territories LPCB approval is a mandatory requirement. Added value of the product or service - LPCB approved products and services are recognised asproviding added value given their ability to conform each and every time. Reduced liability - LPCB approved products and services demonstrate due-diligence which canreduce liability for both you and your customers.What does LPCB Approval offer?LPCB offers approvals to existing British, European, International and LPCB’s own Loss PreventionStandards (LPSs). LPCB’s LPS approval schemes for both products and services are essentially level 5schemes, as described in ISO/IEC Guide 67, with the added requirement to have a quality system certificatedto ISO 9001.The technical requirements of LPCB schemes are given in Loss Prevention Standards (LPSs). Thesedocuments are drafted by LPCB technical experts in conjunction with appropriate external experts. They arethen peer reviewed by representatives from trade bodies, regulators, insurers, specifiers, manufacturers andother suppliers. Finally these documents are approved for use by the BRE Global Governing Body; the Bodythat oversees all of the certification activities of BRE Global, including LPCB.Product schemes comprise: Initial type testing and evaluation of product, sampled by LPCB. Approval and surveillance of the manufacturer’s (or supplier’s) quality management system to ISO9001 (if you have products in for testing at LPCB, it generally costs little or no more to achieve ISO9001 certification). Assessment and surveillance of the manufacturer’s (or supplier’s) factory production control system(FPC). Periodic audit testing of the product from either the factory or marketplace. Labelling or marking as appropriate. Listing of the approved product (service) in the Red BookInstaller schemes comprise: Technical assessment of the installation contractor’s capability. Approval and surveillance of the contractor’s quality management system to ISO 9001 or assessmentagainst the requirements of the relevant Loss Prevention Standard where ISO 9001 is notappropriate. (If you have applied for LPCB assessment of your services, it generally costs little or nomore to achieve ISO 9001 certification). Regular surveillance inspections of on-going installations. The issue of Certificates of Conformity to demonstrate compliance for each installation. Listing of the approved installer in the Red Book.The LPCB Mark - the Mark you can trustAfter approval of a product or service the manufacturer or service provider is allowed to place the LPCBcertification mark, as shown below , on the product, packaging and literature etc. In September 2011 thisimage was updated.18 Jan 2014 v

VOLUME 1 LIST OF APPROVED PRODUCTS AND SERVICESTo thisfrom(Discontinued for new approvalsfrom 1 October 2011)A transition period of up to three years has been allowed for the change, so although we expect many of ourclients’ product(s) will already be carrying the new version of the mark, the ‘old’ mark remains valid and youcan still rely on the products carrying the old mark where their certificate was issued before 1 October 2011.Together with the mark you should always determine the product/service certificate number and check if alisting still valid by going to www.redbooklive.com.Where LPCB holds accreditation through the United Kingdom Accreditation Service (UKAS), the approvedcompany is allowed to include the UKAS symbol (the Crown and Tick) alongside the LPCB mark for certainapplications e.g. promotional literature or material and stationery, as shown below.(Full details of LPCB accreditation can be found on the UKAS website at www.ukas.com)Where for reasons of space or cost the use of the above full mark is not practical, then the following simplifiedmark may be applied directly to the product (for some schemes only).The LPCB scheme rules define how and where the marks can be used.The LPCB horseshoe is the mark you can trust and it is recognised in over 60 countries around the world byregulators, specifiers, designers and end users.For Fire and Security Products and Services Trust the LPCB MarkOther Listings from BRE Globalvi 18 Jan 2014

VOLUME 1 LIST OF APPROVED PRODUCTS AND SERVICES18 Jan 2014 vii

CONTENTS1 Fire detection and alarm products, systems & cables 1SECTION 1 LPS 1014 certified fire detection and alarm system firms 3SECTION 2 Fire detection and alarm systems 14SECTION 3 Control and indicating equipment 18SECTION 4.1 Commercial detectors 167SECTION 4.2 Domestic alarms - smoke, heat and carbon monoxide 314SECTION 5 Manual call points 324SECTION 6 Line units 354SECTION 7 Alarm warning devices 375SECTION 8 Fire resistant cables 447SECTION 9 Alarm receiving centres 532SECTION 10 Alarm transmission and fault monitoring equipment and signalling systems534SECTION 10.1 Alarm transmission and fault warning routing equipment 536SECTION 10.2 Supervised premises transceivers (fire) - LPS 1277 Issue 2.2 537SECTION 10.3 Supervised premises transceivers (fire) - LPS 1277 Issue 3 538viii 18 Jan 2014

INDEX22M KABLO SAN. ve TIC. A.S. 44933E - Electrical Energy Efficiency FZE 450AAarhus Fire Protection Limited 3ADI (ADEMCO) 19ADI International 168ADT Fire and Security 3, 4, 5Advanced Electronics Limited 20, 169, 324, 354,376Advantronic Systems S.L. 171, 325, 355, 377AEI Cables Limited 450AGNI Devices PVT Ltd 173Aguilera Electronica S.L 174Ajax Chubb Varel B.V. 22Alarm Supply Pte Ltd 175Alberta Fire & Security Equipment Limited 5Alpha Fire Services W.L.L. 454AMPAC Europe Limited 23AMPAC Technologies PTY Ltd 27, 175, 325, 355Apollo (Beijing) Fire Products Co Ltd 326Apollo Fire Detectors Limited 177, 326, 356, 378Application Solutions (Safety and Security) Ltd,East Sussex, United Kingdom 30Argus Fire Protection Company Limited 5Argus Security S.r.l. 187, 327, 357, 382Argus-Spectrum 190, 328, 357, 384ATEIS Middle East FZCO 193, 328, 358, 385ATOM KABLO SANAYI VE TICARET A.S. 454Autronica Fire & Security AS 195, 358, 387BBahra Cables Company 456Bailey Maintenance 5Bangkok Cable Co Limited 457Banham Alarms (PropBanham Patent Locks Limited) 532Bardic by Honeywell (Novar Systems Ltd) 31, 196,388BBC Fire Protection Limited 5Beijing Leader Huaxin Electronics Co. Ltd 197Beijing VSAIL Fire Protection Equipment Co Ltd197Bentel Security s.r.l. 329BERICA CAVI S.p.A. 458Biamp Systems Corporation 32Bosch Security Systems BV 34Bristol Fire Ltd 197, 329, 388Building Protection Systems (NI) Limited 35CCarillion (Novar Systems Ltd) 38Cavicel SpA 459Ceasefire Industries Ltd 198, 329, 388Channel Safety Systems Ltd 39Chiron Security Communications Limited 538Chubb Fire & Security Limited 5Chubb Fire & Security Ltd 358Chubb Fire and Security Limited 539Chubb Fire Ltd 199Clymac Limited 6Computionics Limited (Trading as C-Tec) 40Consilium Marine and Safety AB 199Context Plus Ltd 45, 199, 330, 359, 461Control Equipment Limited 15, 47, 200, 330, 359,389Cooper Fulleon Limited 330, 391Cooper Industries Inc 54, 331Cooper Lighting and Safety Ltd 56, 331, 391Cooper MEDC Ltd 393Cooper Safety 201Cooper Sécurité SAS 205Cranford Controls Limited 394CSL DualCom Limited 537DDaemon Fire and Security Limited 6Dätwyler Cabling Solutions AG 462Defensor Group Limited 6Detector Electronics Corporation 58, 206, 359Digital Security Controls, a Division of Tyco SafetyProducts Canada Ltd 315Direction Fire Limited 6Doncaster Cables 463Draka (Malaysia) Sdn. Bhd. 465Draka UK Limited 466, 470Dubai Cable Company (Private) Limited, Tradingas Ducab 474, 475, 479EEDS Elektronik Destek San. ve Tic. Ltd. Şti. 206Eland Cables 479EMCOR Facilities Services Limited, EMCORSpecialist Services 6EMCS - East Midlands Central Station Limited 532Emergi-Lite Safety Systems (Thomas & Betts Ltd)207, 332Emico Limited 6Emirates Fire Fighting Equipment Factory L.L.C.(FIREX) 208, 332, 395, 480Emirates Fire Protections Equip. Factory. TR.Section 60, 209, 332, 360, 395Eurofyre Limited 209Eurotech Fire Systems Limited 210, 332, 395Everday Technology Co. Limited 211, 315, 333Eyston Company Ltd 315FFike Safety Technology Ltd 62, 213, 333, 360, 396Finder Elektronik A.S. 214, 334, 361, 398Fireblitz Extinguisher Ltd 316Fireguard Safety Equipment Co Ltd 216, 334, 398,481Firelite by Honeywell (Pittway SystemsTechnology Group (Europe) Ltd) 64, 217Fireonica Co. Ltd 217, 334Firesafe 65, 316, 481Firetecnics Systems Limited 7GGBE Fire & Security (a division of GB ElectronicsLimited) 718 Jan 2014 ix

INDEXGent By Honeywell (Novar Systems Ltd) 67, 218,335, 361, 399GEZE GmbH 221, 361Gira Giersiepen Gmbh & Co. KG 316Global Fire Equipment S.A. 335, 402Global Fire Systems Limited 7Grainger Fire Systems 7Grupo General Cable Sistemas, S.A. 482Grupo General Cable Sistemas, S.L. 483Gulf Security Technology Co., Ltd. 72, 222, 336,362, 402HHaes Systems Limited 75Hall & Kay Fire Engineering (Ashford) 7HDR 223, 336, 362, 403Hochiki America Corporation 224Hochiki Corporation 225Hochiki Europe (UK) Limited 225, 336, 363, 406Honeywell Automation (I) Pvt. Ltd 232Honeywell Control Systems Limited 233, 364Honeywell Control Systems Ltd 77, 236, 337, 364Honeywell International Inc 82Honeywell Life Safety Systems (Novar SystemsLtd) 237Horing LIH Industrial Co Ltd 238, 337, 416Hosiden Besson Limited 417Huzhou Jiusheng Electric Co Ltd 484II.C. Service & Maintenance Limited 8Iceberg Building Services Limited 8INIM Electronics s.r.l. 239, 338, 365Intelligent Safety & Security Technology Ltd. 240,338, 417Irish Driver-Harris Company Limited 485JJalo Helsinki Oy / Jalo Ltd 317Jaylow Supplies Ltd 490John Lewis Partnership 317KKAC Alarm Company Limited 338, 418Keystone Electric Wire & Cable Company Ltd 491Kidde Finland Oy 317Kidde Products Ltd 241, 365Kidde Products Ltd, trading as AirSenseTechnology 242Kidde Safety Europe Ltd 318Kingfell Engineering Limited 8Kingfisher Security (UK) Limited trading asKingfisher Fire & Security 8KME Italy SpA 492LLabor Strauss Sicherungsanlagenbau GmbH 244,343, 422LEONI Studer AG 493Lichfield Fire & Safety Equipment Co. Ltd(LIFECO) 245Lloret Fire and Security Limited 8MM. J. Quinn Integrated Services Limited 8, 9Mavili Elektronik Ticaret Ve Sanayi A.S. 85, 245MECE Fire & Security Limited 9Mercury Engineering 9MGC Systems Corp. 343MICC (Shanghai) Electric Co Ltd 499Mineral Insulated Cable Co Ltd 500MITIE Technical Facilities Management Limited 9MITIE Technical Facilities Management Limited(MITIE Fire and Security Systems) 9Morley-IAS Fire Systems By Honeywell 246Morley-IAS Fire Systems by Honeywell (PittwaySystems Technology Group (Europe) Ltd) 89,248, 343, 365, 422Multron Systems Pte Ltd 92, 250, 344, 366, 426NNAJD ELECTRICALS & SAFETY EQUIPMENTTRADING 501National Monitoring (Prop. AVR Group Limited)533Nexans Schweiz AG 501Nexans Turkiye Endustri ve Ticaret A.S. 502NG Bailey Limited - Rail Division 9NINGBO LONGMAX ELECTRONIC CO., LTD 318Ningbo Siterwell Electronics Co., Ltd. 320Nitin Ventures FZE 93, 251, 344, 366, 427, 503Nittan Europe Limited 252Norden Communication UK Ltd 503Notifier by Honeywell (Pittway SystemsTechnology Group (Europe) Ltd) 17, 95, 253,345, 366, 427Notifier Fire Systems India 256OOlympia Electronics S.A. 99, 258OLYMPIC CABLE COMPANY SDN. BHD. 504Oman Cables Industry (SAOG) 505Orient Corporation Pte. Ltd. 100, 258, 429PPanasonic Corporation 259, 367PEL Services Limited 10Pelco Finland Oy 101, 259, 345, 367, 430Pentair Thermal Management Canada Limited 505Pentair Thermal Management UK Limited 506Philton Fire & Security Limited 261Photain Controls 103Pittway Tecnologica Srl. 262, 368Plana Fabrega 267Protec Fire Detection plc 10, 104, 267, 346, 368,430Prysmian Cables & Systems Limited 508, 516RR & S Fire and Security Services Limited 10RAMCRO S.p.A. Trading as B3 Cables Solution517Ravel Electronics Ltd 271, 346, 431SSabre Fire & Security Ltd 320Safety Hi-Tech Srl 272, 368Safety Technology International (Europe) Limited346Safex Fire Services Limited 273Sareme UAB 273, 347x 18 Jan 2014

INDEXSchlumberger Oilfield UK PLC, Sensor HighwayLimited (Schlumberger, Southampton) 274Schneider Electric Buildings Sweden AB 107Schneider Electronic Buildings AS 108Schrack Seconet AG 347Scotshield Limited 10Securiton AG 347Sensetech Systems Limited 11Shakun Polymers Limited 518Shanghai Mosafe Equipment Co.Ltd 320Shenzhen Fanhai Sanjiang Electronics CO., Ltd321Shenzhen Heiman Technology Co Ltd 275SHIELD FIRE, SAFETY AND SECURITY LIMITED519SHIELD FIRE, SAFETY AND SECURITY LTD108,275, 347, 369, 431, 520Siemens plc, Building Technologies, Fire SafetyDivision 11Siemens Switzerland Limited, BuildingTechnologies Division 109, 276, 348, 369, 432SMS (Novar Systems Ltd) 117, 282, 349, 371, 433Southern Monitoring Services Limited 533Sprue Safety Products Ltd 321Static Systems Group Plc 11Sterling Safety Systems 283, 349, 371, 434Synaps Technology Srl 350System Sensor 286System Sensor Europe 286, 436System Sensor Europe, Life Safety DistributionAG 437System Sensor, Honeywell International (I) PVT.Limited 287TT Clarke Public Limited Company 11T V F (UK) Limited 11Tai Sin Electric Limited 520Talentum Developments Limited 290Tamlite Emergency & Fire 290Teledata S.r.l. 291, 350, 440TELE-FONIKA Kable Sp. z o.o., S.K.A. 521Teletek Electronics JSC 293Texecom Ltd 441Thameside Fire Protection Co. Limited 11Thorn Security Limited, Trading as Tyco SafetyProduct 119Thorn Security Limited, trading as Tyco SafetyProducts 293, 350, 371, 444Tratos Cavi SpA 525Trinity Protection Systems Limited trading asTrinity Fire & Security Systems 12Turk Prysmian Kablo ve Sistemleri A.S. 526Tyco Fire and Integrated Solutions (the tradingcompany for Tyco Fire and Integrated Solutions(UK) Limited and Tyco Fire and IntegratedSolutions (Ireland) Limited) 12, 13UUnion Cable Company Ltd 527UniPOS Ltd 298UTC Fire & Security (Africa) trading as Ziton 133UTC Fire & Security (Pty) LTD Trading as Ziton133UTC Fire & Security BV 134, 299, 351, 372UTC Fire & Security BV. 539UTC Fire & Security Inc. Trading as EdwardsSystems Technology 160, 301, 353, 373, 445VVentcroft Limited 528Vimpex Limited 374, 446Vipond Fire Protection Limited 13Visonic 322VRC Terofire Products 303WWagner Group GmbH 303WebWayOne Ltd 540Wrexham Mineral Cables 530XXtralis Pty Limited 163, 306ZZarja Elektronika d.o.o 164Zeta Alarm Systems by GLT Exports Limited 165,312, 322, 353, 374, 44618 Jan 2014 xi

Part1FIRE DETECTION ANDALARM PRODUCTS,SYSTEMS & CABLES

PART 1: FIRE DETECTION AND ALARM PRODUCTS, SYSTEMS &CABLESINTRODUCTIONA working fire detection and alarm system will increase the level of safety in a building by automaticallywarning occupants of fire before they would otherwise detect it.To ensure the system works, the system must be designed correctly, products must be correctly selected andthe systems must be correctly installed and maintained. It is recommended that all systems are designed,installed, commissioned and maintained by contractors who are approved by LPCB to LPS 1014 and that theyare connected to Alarm Receiving Centres approved to LPS 1020.Listings in this section include:ProductsControl and indicating equipment including voice alarm and power suppliesWireless, flame, beam, aspirating, smoke, heat and multi-sensor detectorsManual call pointsLine units including input and output devicesAlarm warning devices including visual alarms, loudspeakers and soundersCablesAlarm transmission equipmentSignalling systemsProducts are approved in accordance with a range of standards. The details of these standards are given atthe front of each section relevant to the product. Some of the above products may be hard wired or wireless(Radio link). Wireless products should also be approved to EN 54-25.SystemsFire detection and alarm systems are approved for system compatibility in accordance with: LPS 1054: Requirements and testing procedures for the approval and listing of componentcompatibility for fire detection and alarm systems. EN 54 - Part 13: Compatibility assessment for system components.Design, installation, commissioning and maintenance contractorsContractors are approved in accordance with: LPS 1014: Requirements for certificated fire detection and alarm system firms. LPS 1020: Alarm Receiving Centres2 18 Jan 2014

PART 1: SECTION 1LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMSWHY USE AN LPS 1014 APPROVED COMPANY?Even with the best equipment, fire detection and alarm systems are only effective if correctly designed,installed, commissioned and serviced. It is therefore important that specifiers select only competent firms witha proven track record to undertake the work.LPS 1014 Requirements for Certificated Fire Detection and Alarm System Firms meets these requirements infull.LPS 1014 requires one encompassing Certificate of Conformity for the project, i.e. single point responsibility,which benefits all parties concerned, i.e. the insurer, the fire brigade, the building owner, etc. It is based on BS5839-1 and also requires the use of third party approved products. For each system specifiers should requestthe issue of an LPCB Certificate of Conformity as part of the contract which:certifies that the fire detection and alarm system was designed, installed and commissioned inaccordance with the installation rules applied, andensures that the system is recorded by LPCB as a certificated fire detection and alarm installation.The availability of more varied and sophisticated fire detection and alarm equipment means that it is evenmore important that firms listed to LPS 1014 are regularly assessed by LPCB for their competence to design,install, commission and service fire detection and alarm systems in accordance with acceptable installationrules or codes of practice.Additional officesWhere a firm has additional offices, each office must meet the requirements of LPS 1014 to be eligible forcertification, and is separately listed.Provisional ApprovalFirms with limited experience and track record can gain Provisional Approval in the LPS 1014 scheme. Theirwork is closely monitored by LPCB and when they have completed the requisite number of fire detection andalarm systems contracts over a period of not less than 2 years, and subject to satisfactory performance, theywill be given full approval and listed in this section of the Red Book.Aarhus Fire Protection LimitedAarhus House, 4 Moss Lane, Whitefield, Manchester M45 6HG, United KingdomTel: +44 (0)161 767 8715 • Fax: +44 (0)161 767 8716E-mail: response@aarhusfire.co.uk • Website: www.aarhusfire.co.ukCertificate No. CFA-187 to LPS 1014ADT Fire and SecuritySecurity House, The Summit, Hanworth Road, Sunbury on Thames, Middlesex TW16 5DB, United KingdomTel: +44 (0)1932 743456 • Fax: +44 (0)1932 743222Certificate No. CFA-105 to LPS 101418 Jan 2014 3

PART 1: SECTION 1LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMSADT Fire and SecurityADT House, 5th Avenue Business Park, Team Valley Trading Estate, Gateshead, Tyne and Wear NE11 0HF,United KingdomTel: +44 (0)191 451 5000 • Fax: +44 (0)191 487 9543Certificate No. CFA-111 to LPS 1014ADT Fire and SecurityUnit 5, Redwing Court Business Centre, Ashton Road, Romford, Essex RM3 8QQ, United KingdomTel: +44 (0)2082 724700 • Fax: +44 (0)2082 724709Certificate No. CFA-112 to LPS 1014ADT Fire and SecurityADT House, Tannochside Park, Uddingston, Glasgow G71 5PH, United KingdomTel: +44 (0)1698 486000 • Fax: +44 (0)1698 486100Certificate No. CFA-113 to LPS 1014ADT Fire and SecurityTyco Park, Grimshaw Lane, Newton Heath, Manchester M40 2WL, United KingdomTel: +44 (0)161 252 5500 • Fax: +44 (0)161 252 5688Certificate No. CFA-109 to LPS 1014ADT Fire and SecurityADT House, Mucklow Hill, Halesowen, Birmingham, West Midlands B62 8DA, United KingdomTel: +44 (0)1212 556000 • Fax: +44 (0)1212 556100Certificate No. CFA-108 to LPS 1014ADT Fire and Security180 Aztec West, Almondsbury, Bristol BS32 4TU, United KingdomTel: +44 (0)1454 843434 • Fax: +44 (0)1454 843484Certificate No. CFA-107 to LPS 10144 18 Jan 2014

PART 1: SECTION 1LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMSADT Fire and Securityc/o Hindle Cockburns Ltd, Victoria Road, Leeds LS11 9SX, United KingdomTel: +44 (0)1132 911000 • Fax: +44 (0)1132 425933Certificate No. CFA-110 to LPS 1014Alberta Fire & Security Equipment LimitedSan Gwakkin Road, Mriehel, BKR 3000, MaltaTel: +356 21 443538 • Fax: +356 21 484077E-mail: info@alberta.com.mt • Website: www.alberta.com.mtCertificate No. CFA-177 to LPS 1014Argus Fire Protection Company LimitedHendglade House, 46 New Road, Stourbridge, West Midlands DY8 1PA, United KingdomTel: +44 (0)1384 376256 • Fax: +44 (0)1384 393955E-mail: info@argusfire.co.uk • Website: www.argusfire.co.ukCertificate No. CFA-148 to LPS 1014Bailey Maintenance7 Brown Lane West, Leeds LS12 6EH, United KingdomTel: +44 (0)113 234 3443 • Fax: +44 (0)113 222 3925E-mail: enquiries@baileymaintenance.co.uk • Website: www.baileymaintenance.co.ukCertificate No. CFA-165 to LPS 1014BBC Fire Protection LimitedSt Florian House, Ayton Road, Wymondham, Norfolk NR18 0QH, United KingdomTel: +44 (0)1953 857700 • Fax: +44 (0)1953 857750E-mail: sales@bbcfire.co.uk • Website: www.bbcfire.co.ukCertificate No. CFA-126 to LPS 1014Chubb Fire & Security Limited5 Canal Place, Armley Road, Leeds LS12 2DU, United KingdomTel: +44 (0)113 235 5131 • Fax: +44 (0)113 235 5132E-mail: fire.leeds@chubb.co.uk • Website: www.chubb.co.ukCertificate No. CFA-120 to LPS 101418 Jan 2014 5

PART 1: SECTION 1LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMSClymac LimitedCloudway Court, Belton Road, Loughborough LE11 1LW, United KingdomTel: +44 (0)1509 232651 • Fax: +44 (0)1509 232665E-mail: sales@clymac.co.uk • Website: www.clymac.co.ukCertificate No. CFA-154 to LPS 1014Daemon Fire and Security LimitedDaemon House, 41-42 Albert Road, Tamworth, Staffs B79 7JS, United KingdomTel: +44 (0)1827 69266 • Fax: +44 (0)1827 53584E-mail: sales@daemonfire.co.ukCertificate No. CFA-145 to LPS 1014Defensor Group LimitedDefensor House, 15 Kingsley Street, Leicester LE2 6DY, United KingdomTel: +44 (0)116 244 8689 • Fax: +44 (0)116 244 8884E-mail: j.kyte@defensorfds.co.ukCertificate No. CFA-161 to LPS 1014Direction Fire LimitedUnits 4 & 5 Fire Quarter, Blenheim Road, Epsom, Surrey KT19 9QN, United KingdomTel: +44 (0)1372 744499 • Fax: +44 (0)1372 741188E-mail: general@directionfire.co.uk • Website: www.directionfire.co.ukCertificate No. CFA-178 to LPS 1014EMCOR Facilities Services Limited, EMCOR Specialist ServicesPremier House, Tollgate, Eastleigh, Hampshire SO53 3YE, United KingdomTel: +44 (0)2380 648028 • Fax: +44 (0)2380 648191E-mail: ukinfo@emcoruk.com • Website: www.emcoruk.comCertificate No. CFA-151 to LPS 1014Emico LimitedAble House, 1 Figtree Hill, Hemel Hempstead, Hertfordshire HP2 5XL, United KingdomTel: +44 (0)1442 213111 • Fax: +44 (0)1442 236945E-mail: contact@emico.co • Website: www.emico.coCertificate No. CFA-185 to LPS 10146 18 Jan 2014

PART 1: SECTION 1LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMSFiretecnics Systems LimitedFiretecnics House, 328 St James's Road, London SE1 5JX, United KingdomTel: +44 (0) 20 7587 0927 • Fax: +44 (0) 20 7740 3567E-mail: info@firetecnics.co.uk • Website: www.firetecnics.comCertificate No. CFA-146 to LPS 1014GBE Fire & Security (a division of GB Electronics Limited)Unit C2, Elmbridge Court, Cheltenham Road East, Gloucester GL3 1JZ, United KingdomTel: +44 (0)845 1220884 • Fax: +44 (0)845 1220885E-mail: info@gbe-uk.com • Website: www.gbe-uk.comCertificate No. CFA-180 to LPS 1014Global Fire Systems Limited15 The Triangle, NG2 Business Park, Queens Drive, Nottingham NG2 1AE, United KingdomTel: +44 (0)870 220 8211 • Fax: +44 (0)115 943 8999E-mail: g.shillingford@globalfireandsecurity.co.uk • Website: www.globalfire.co.ukCertificate No. CFA-189 to LPS 1014Grainger Fire SystemsThornley House, Carrington Business Park, Carrington, Manchester M31 4XL, United KingdomTel: +44 (0)161 777 6700 • Fax: +44 (0)161 777 6638E-mail: info@grainger-fire.co.ukThe following location is included within the scope of certification for servicing:Unit 1A, Newton Court, Wavertree Technology Park, Wavertree, Liverpool L13 1EJTel: +44 (0)151 220 4068 • Fax: +44 (0)151 259 4365Certificate No. CFA-125 to LPS 1014Hall & Kay Fire Engineering (Ashford)Littleton Road, Ashford, Middlesex TW15 1TZ, United KingdomTel: +44 (0)1784 425949 • Fax: +44 (0)1784 424177E-mail: Windsor@hkfire.co.uk • Website: www.hkfire.co.ukCertificate No. CFA-147 to LPS 101418 Jan 2014 7

PART 1: SECTION 1LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMSI.C. Service & Maintenance LimitedUnit K3 Temple Court, Knights Park, Knight Road, Strood, Kent ME2 2LT, United KingdomTel: +44 (0)1634 290300 • Fax: +44 (0)1634 290700E-mail: sales@icservice.uk.com • Website: www.icservice.uk.comCertificate No. CFA-158 to LPS 1014Iceberg Building Services LimitedUnit 9, Honywood Business Park, Honywood Road, Basildon, Essex SS14 3HW, United KingdomTel: +44 (0)1268 663900 • Fax: +44 (0)1268 663909E-mail: gemma@icebergbuildingservices.co.uk • Website: www.icebergbuildingservices.co.ukCertificate No. CFA-175 to LPS 1014Kingfell Engineering LimitedPO Box 64222, Barnby Street, London NW1 2RS, United KingdomTel: +44 (0)203 2145252 • Fax: +44 (0)2032145253/5E-mail: info@kingfellengineering.co.uk • Website: www.kingfellengineering.comCertificate No. CFA-138 to LPS 1014Kingfisher Security (UK) Limited trading as Kingfisher Fire & Security1 Riverside Industrial Estate, Dogflud Way, Farnham GU9 7UG, United KingdomTel: +44 (0)1252 710809 • Fax: +44 (0)1252 710816E-mail: info@kingfishersecurity.co.uk • Website: www.kingfishersecurity.co.ukCertificate No. CFA-176 to LPS 1014Lloret Fire and Security Limited24 Ullswater Crescent, Ullswater Business Park, Coulsdon, Surrey CR5 2HR, United KingdomTel: +44 (0) 208 410 4600 • Fax: +44 (0) 208 668 9141E-mail: david.drouin@lloret.co.uk • Website: www.lloret.co.ukCertificate No. CFA-181 to LPS 1014M. J. Quinn Integrated Services LimitedOak House, Overbrook Lane, Knowsley Business Park, Knowsley, Merseyside L34 9FB, United KingdomTel: +44 (0)151 547 8800 • Fax: +44 (0)151 547 8801E-mail: enquiries@mjquinn.co.uk • Website: www.mjquinn.co.ukCertificate No. CFA-137 to LPS 10148 18 Jan 2014

PART 1: SECTION 1LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMSM. J. Quinn Integrated Services Limited5th Floor, 119 Farringdon Road, London EC1R 3DA, United KingdomTel: +44 (0)207 239 8750 • Fax: +44 (0)207 239 8751E-mail: enquiries@mjquinn.co.uk • Website: www.mjquinn.co.ukCertificate No. CFA-143 to LPS 1014MECE Fire & Security LimitedCourtlodge, Kemsley Street Road, Bredhurst, Gillingham, Kent ME7 3LS, United KingdomTel: +44 (0)1634 260607 • Fax: +44 (0)1634 260278E-mail: enquiries@mecefireandsecurity.co.uk • Website: www.mecefireandsecurity.co.ukCertificate No. CFA-159 to LPS 1014Mercury EngineeringMercury House, Sandyford Industrial Estate, Foxrock, Dublin 18, IrelandTel: +353 1 216 3000 • Fax: +353 1 216 3006E-mail: fireprotection@mercury.ie • Website: www.mercury.ieCertificate No. CFA-174 to LPS 1014MITIE Technical Facilities Management Limited1st Floor Counting House, 53 Tooley Street, London SE1 2QN, United KingdomTel: +44 (0)207 022 8300 • Fax: +44 (0)207 022 8301E-mail: Michael.Buckley@mitie.com • Website: www.mitie.comCertificate No. CFA-129 to LPS 1014MITIE Technical Facilities Management Limited (MITIE Fire and Security Systems)MITIE House, 61-63 Kepler, Lichfield Road Industrial Estate, Tamworth B79 7XE, United KingdomTel: +44 (0)1827 309791 • Fax: +44 (0)1827 313480E-mail: Kevin.FTurner@mitie.com • Website: www.mitie.comCertificate No. CFA-163 to LPS 1014NG Bailey Limited - Rail Division3rd Floor Angel Building, 407 St John's Street, London EC1V 4AB, United KingdomTel: +44 (0)20 7843 0200 • Fax: +44 (0)20 7843 0201E-mail: peter.patrick@ngbailey.co.uk • Website: www.ngbailey.co.ukCertificate No. CFA-186 to LPS 101418 Jan 2014 9

PART 1: SECTION 1LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMSPEL Services LimitedBelvue Business Centre, Belvue Road, Northolt, Middlesex UB5 5QQ, United KingdomTel: +44 (0)20 8839 2100 • Fax: +44 (0)20 8841 1948E-mail: pel@pel.co.uk • Website: www.pel.co.ukCertificate No. CFA-179 to LPS 1014Protec Fire Detection plcProtec House, Churchill Way, Nelson, Lancashire BB9 6RT, United KingdomTel: +44 (0)1282 717171 • Fax: +44 (0)1282 717273E-mail: sales@protec.co.uk • Website: www.protec.co.ukIncluding the following satellite offices:Unit 4, White Oak Square, London Road, Swanley, Kent BB8 1AG, United KingdomTel: +44 (0)845 456 5394 • Fax: +44 (0)845 456 5395Unit 10, Fulcram 4, Solent Way, Whiteley, Fareham, Hampshire PO15 7FT, United KingdomTel: +44 (0)845 456 5392 • Fax: +44 (0)845 456 53935 Morston Court, Blakeney Way, Kingswood Lakeside, Cannock, Staffordshire WS11 8JB, United KingdomTel: +44 (0845 456 5398 • Fax: +44 (0845 456 5399Unit 1, Ashfield Court, Whitehall Road, Leeds LS12 5JB, United KingdomTel: +44 (0)845 456 53388 • Fax: +44 (0)845 456 53389Certificate No. CFA-132 to LPS 1014R & S Fire and Security Services Limited4 Swanbridge Industrial Park, Black Croft Road, Witham, Essex CM8 3YN, United KingdomTel: +44 (0)1708 683040 • Fax: +44 (0)1708 683068E-mail: sales@rs-fire.com • Website: www.rs-fire.comCertificate No. CFA-182 to LPS 1014Scotshield LimitedCentury House, Chapelhall Industrial Estate, Airdrie, Scotland ML6 8QH, United KingdomTel: +44 (0)1236 767788 • Fax: +44 (0)1236 762233E-mail: sales@scotshield.comIncluding the following satellite office for service work onlyUnit 2, 9 Lotland Street, Inverness ML1 8QHTel: +44 (0)1463 709637 • Fax: +44 (0)1463 709638Certificate No. CFA-150 to LPS 101410 18 Jan 2014

PART 1: SECTION 1LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMSSensetech Systems LimitedLangdale House, 11 Marshalsea Road, London SE1 1EN, United KingdomTel: +44 (0)845 689 9099 • Fax: +44 (0)207 8633238E-mail: info@sensetechsystems.co.uk • Website: www.sensetechsystems.co.ukCertificate No. CFA-184 to LPS 1014Siemens plc, Building Technologies, Fire Safety DivisionBrunel House, Sir William Siemens Square, Frimley, Camberley, Surrey GU16 8QD, United KingdomTel: +44 (0)1276 696000 • Fax: +44 (0)1276 696133E-mail: sales.uk.sbt@siemens.com • Website: www.siemens.co.uk/buildingtechnologiesCertificate No. CFA-100 to LPS 1014Static Systems Group PlcHeath Mill Road, Wombourne, Staffordshire WV5 8AN, United KingdomTel: +44 (0)1902 895551 • Fax: +44 (0)1902 324969E-mail: sales@staticsystems.co.uk • Website: www.staticsystems.co.ukCertificate No. CFA-135 to LPS 1014T Clarke Public Limited Company45, Moorfields, London EC2Y 9AE, United KingdomTel: +44 (0)207 997 7400 • Fax: +44 (0)207 997 7405E-mail: info@tclarke.co.uk • Website: www.tclarke.co.ukCertificate No. CFA-188 to LPS 1014T V F (UK) Limited59-69 Queens Road, High Wycombe, Buckinghamshire HP13 6AH, United KingdomTel: +44 (0)1494 450641 • Fax: +44 (0)1494 465378E-mail: customer.service@tvfltd.co.uk • Website: www.tvfltd.co.ukCertificate No. CFA-128 to LPS 1014Thameside Fire Protection Co. LimitedUnit 4, Sovereign Business Park, Cranes Farm Road, Basildon, Essex SS14 3JD, United KingdomTel: +44 (0)1268 597999 • Fax: +44 (0)1268 597998E-mail: enquiries@thamesidefire.co.uk • Website: www.thamesidefire.co.ukCertificate No. CFA-171 to LPS 101418 Jan 2014 11

PART 1: SECTION 1LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMSTrinity Protection Systems Limited trading as Trinity Fire & Security SystemsLittle Bridge Business Park, Oil Mill Lane, Clyst St.Mary, Exeter, Devon EX5 1AG, United KingdomTel: +44 (0)1392 874455 • Fax: +44 (0)1392 875546E-mail: info@trinityprotection.co.uk • Website: www.trinityprotection.co.ukCertificate No. CFA-160 to LPS 1014Trinity Protection Systems Limited trading as Trinity Fire & Security SystemsUnit B12a, Holly Farm Business Park, Honiley, Warwickshire CV8 INP, United KingdomTel: +44 (0)1926 485080 • Fax: +44 (0)1926 485090E-mail: info@trinityprotection.co.uk • Website: www.trinityprotection.co.ukCertificate No. CFA-167 to LPS 1014Trinity Protection Systems Limited trading as Trinity Fire & Security Systems180 Milton Park, Abingdon, Oxfordshire OX14 4SE, United KingdomTel: +44 (0)1235 862456 • Fax: +44 (0)1235 834450E-mail: info@trinityprotection.co.uk • Website: www.trinityprotection.co.ukCertificate No. CFA-168 to LPS 1014Tyco Fire and Integrated Solutions (the trading company for Tyco Fire and IntegratedSolutions (UK) Limited and Tyco Fire and Integrated Solutions (Ireland) Limited)Hillcrest Business Park, Cinderbank, Dudley, West Midlands DY2 9AP, United KingdomTel: +44 (0)1384 458993 • Fax: +44 (0)1384 458981Website: www.tycofis.comCertificate No. CFA-103 to LPS 1014Tyco Fire and Integrated Solutions (the trading company for Tyco Fire and IntegratedSolutions (UK) Limited and Tyco Fire and Integrated Solutions (Ireland) Limited)1610 Park Avenue, Aztec West, Almondsbury, Bristol BS32 4UA, United KingdomTel: +44 (0)1454 240071 • Fax: +44 (0)1454 626443Website: www.tycofis.comCertificate No. CFA-170 to LPS 101412 18 Jan 2014

PART 1: SECTION 1LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMSTyco Fire and Integrated Solutions (the trading company for Tyco Fire and IntegratedSolutions (UK) Limited and Tyco Fire and Integrated Solutions (Ireland) Limited)Tyco House, 57-63 Farnham Road, Slough, Berkshire SL1 3TN, United KingdomTel: +44 (0)1753 574111 • Fax: +44 (0)1753 824226Website: www.tycofis.comCertificate No. CFA-157 to LPS 1014Vipond Fire Protection Limited10-12 Glenfield Road, Kelvin Industrial Estate, East Kilbride, Lanarkshire G75 0RA, United KingdomTel: +44 (0)1355 2375 25/80/88 • Fax: +44 (0)1355 263399E-mail: admin.uk@vipondltd.co.uk • Website: www.vipondfire.co.ukCertificate No. CFA-173 to LPS 101418 Jan 2014 13

PART 1: SECTION 2FIRE DETECTION AND ALARM SYSTEMSA fire detection and fire alarm system is typically made up of a number of inter-linked components includingdetectors, manual call points, and alarm sounders connected to control and indicating equipment by means ofone or more transmission paths. All system components, including the control and indicating equipment arealso connected to a power supply directly or indirectly.A fire detection and alarm system may be linked to other systems such as fire protection, or buildingmanagement systems. These other systems are not considered as part of the fire detection and alarmsystems.The fire detection and alarm systems may be networked together.Each of the components that constitute the fire detection and alarm system may be individually tested andapproved against their appropriate standard to demonstrate their own performance and reliability but in orderto ensure their compatibility and performance together within the system, certain system tests andrequirements must be fulfilled.The system standard specifies the requirements for compatibility and connectability assessment of systemcomponents that either comply with the requirements of EN 54 and/or with a manufacturer’s specification. Thestandard also includes requirements for the integrity of the fire detection and fire alarm system whenconnected to other systems.This section lists approved fire detection and alarm systems suitable for use in buildings for the protection ofpeople and property. The system requirements ensure the compatibility of the different components of thesystem work reliably together. Each component of the fire detection and alarm systems listed in this sectionare approved to the applicable product standard and are listed in Sections 3, 4.1, 5, 6, and 7. The approvalprocess for the system is outlined in scheme document SD040.Systems listed in this section have been approved to LPS 1054: 2001 Requirements for the evaluation ofcomponent compatibility for fire alarm systemsThis standard was designed for the UK market and applies to systems incorporating control and indicatingequipment and power supply equipment complying with EN 54-2 Fire detection and fire alarm systems -Control and indicating equipment and EN 54-4 Fire detection and fire alarm systems - Power supplyequipment respectively.Networked systems are evaluated by ensuring that each control panel connected to the network can operateas a stand alone unit, in the event of failure of the network connections, and that failure of a control panel willnot affect other control panels on the network.LPCB is now accepting products for approval to EN 54-13: 2005 Compatibility assessment for systemcomponents which is applicable to the EU market and to LPS 1653: 2011 Requirement for Network firedetection and alarm systems.Note: Since LPCB uses national and international standards for the listing of products, in some instances, therequirements of these standards may conflict with the recommendations of local codes of practice. Werecommend that specifiers seek advice from the relevant local authorities and amend their specificationsaccordingly.14 18 Jan 2014

PART 1: SECTION 2FIRE DETECTION AND ALARM SYSTEMSControl Equipment LimitedHillcrest Business Park, Dudley, West Midlands DY2 9AP, United KingdomTel: +44 (0)1384 458651 • Fax: +44 (0)1384 458972E-mail: celsales@controlequipment.co.uk • Website: www.controlequipment.comCertificate No: 018b to LPS 1054-1Certificate No: 018d to LPS 1054-1Certificate No: 018u to EN 54-13: 2005Fire Detection and Alarm SystemsCertificated ProductsPrecept fire alarm systemComprising the following products:LPCB Ref.No.018b/S1Discovery fire alarmsystemControl Equipment LimitedPrecept 2, 4, 8, 16 and 32 zone control and indicating equipment.Apollo Fire Detectors Limited55000-100 grade 1 rate of rise heat detector (45681-200 base)55000-200 ionization smoke detector (45681-200 base)55000-300 photoelectic smoke detector (45681-200 base)53531-221 grade 1 rate of rise heat detector (45681-007 base) continued53541-151 ionization smoke detector (45681-007 base)53541-200 photoelectric smoke detector (45681-007 base)55000-101 grade 2 rate of rise heat detector (45681-200 base)55000-102 grade 3 rate of rise heat detector (45681-200 base)55000-103 range 1 rate of rise heat detector (45681-200 base)55000-104 range 2 rate of rise heat detector (45681-200 base)55000-210 integrating ionization smoke detector (45681-200 base)Hochiki CorporationDFE-60 grade 2 fixed temperature heat detector (YBF-RL/4H5 base)DFE-90 range 1 fixed temperature heat detector (YBF-RL/4H5 base)DCC-1EL grade 1 rate of rise heat detector (YBF-RL/4H5 base)DCC-2EL grade 2 rate of rise heat detector (YBF-RL/4H5 base)DCC-R1EL range 1 rate of rise heat detector (YBF-RL/4H5 base)Hochiki EuropeSLK-E photoelectric smoke detector (YBF-RL/4H5 base)SIH-E ionization smoke detector (YBF-RL/4H5 base)KAC Alarm Company LimitedKR72 manual call point.Photain Controls LimitedISD-P91 ionization smoke detectorPRR-P91 grade 1 rate of rise heat detectorPHD-P90 range 1 fixed temperature heat detectorSignature Industries - Clifford and Snell Alarms.MCP/R/F manual call pointMCP/R/S manual call pointSystem Sensor, St. Charles, Illinois, USA.1151E ionization smoke detector (B401 base)2151E photoelectric smoke detector (B401 base)Comprising the following products:Control Equipment LimitedDiscovery analogue addressable control and indicating equipmentApollo Fire Detectors Limited55000-400 grade 2 analogue temperature monitor55000-420 grade 2 analogue temperature monitor58000-400 Discovery temperature monitor55000-600 analogue photoelectric smoke monitor55000-620 analogue photoelectric smoke monitor58000-600 Discovery optical smoke monitor55000-500 analogue ionisation smoke monitor55000-520 analogue ionisation smoke monitor58000-500 Discovery ionisation smoke monitor58000-700 Discovery multisensor monitor55000-900 surface and flush mounted manual call point55000-910 flush mounted manual call point55000-950 waterproof addressable manual call point58000-900 flush and surface mounted manual call point018d/0118 Jan 2014 15

PART 1: SECTION 2FIRE DETECTION AND ALARM SYSTEMSCertificated ProductsFireClass Fire DetectionSystem58000-910 flush mounted manual call point58000-920 surface mounted manual call point55000-700 XP95 short circuit isolator45681-321 XP95 negative isolating base45681-210 XP95 addressable mounting baseComprising the following products:Commercial DetectorsFC460P Digital addressable photoelectric smoke detector (4B, 4B-I and 5B bases)FC460PH Digital addressable photoelectric smoke and Class P heat detector (4B, 4B-Iand 5B bases)FC460PC Digital addressable photoelectric smoke, Class P heat and carbon monoxidedetector (4B, 4B-I and 5B bases)FC460H Digital addressable Class P heat detector (4B, 4B-I and 5B bases)Manual Call PointsFC420CP Addressable Type A indoor manual call pointFC421CP Addressable Type A outdoor manual call pointLine Units4B-I Short circuit isolator baseFC410QIO Quad input/output module with short circuit isolatorFC410QRM Quad relay module with short circuit isolatorFC410QMO Quad monitored output module with short circuit isolatorAlarm Warning DevicesFC410LPSYR Addressable loop powered Type A sounder (red) with short circuitisolatorFC410LPSYW Addressable loop powered Type A sounder (white) with short circuitisolatorFC410LPSY Addressable loop powered Type B sounder (red) with short circuitisolatorFC410LPAVR Addressable loop powered Type A sounder beacon (red) with shortcircuit isolatorFC410LPAVW Addressable loop powered Type A sounder beacon (white) withshort circuit isolatorFC410LPAV Addressable loop powered Type B sounder beacon (red) withshort circuit isolatorFC430LPASB Loop powered sounder beacon base with short circuit isolatorFC430LPSB Loop powered sounder base with short circuit isolatorFC430SB Analogue addressable type A sounder baseControl and Indicating EquipmentFC32-1 FireClass (557.200.701) Analogue Addressable Control andIndicating Equipment, 1 loop, 32 ZoneFC64-2 FireClass (557.200.702) Analogue Addressable Control andIndicating Equipment, 2 loop, 64 ZoneFC64-4 FireClass (557.200.703) Analogue Addressable Control andIndicating Equipment, 4 loop, 64 ZoneFC240-2 FireClass (557.200.704) Analogue Addressable Control and IndicatingEquipment, 2 loop, 240 ZoneFC-240-4 FireClass (557.200.705) Analogue Addressable Control and IndicatingEquipment, 4 loop, 240 ZoneLPCB Ref.No.018u/01Bases:4B Universal mounting base4B-I Isolator base5B Standard mounting baseGeneral note:For further information on each individual product including approved sensitivities, heat classification, sounder tones etc, refer to modelreference number(s) in the appropriate section of the Red Book or on www.redbooklive.com16 18 Jan 2014

PART 1: SECTION 2FIRE DETECTION AND ALARM SYSTEMSNotifier by Honeywell (Pittway Systems Technology Group (Europe) Ltd)Charles Avenue, Burgess Hill, West Sussex RH15 9UF, United KingdomTel: +44 (0)1444 230300 • Fax: +44 (0)1444 230888E-mail: sales@notifiersystems.co.uk • Website: www.notifierfiresystems.co.ukCertificate No: 154e to lps 1054: Issue 2.1Certificated ProductsNotifier NFS2-8 Fire AlarmSystemComprising the following products:Notifier Fire Systems Ltd124-345-002 NFS2-8, 2 Zone Conventional Control and Indicating Equipment124-345-004 NFS2-8, 4 Zone Conventional Control and Indicating Equipment124-345-008 NFS2-8, 8 Zone Conventional Control and Indicating EquipmentMorley-IAS Fire SystemsECO 1002 Photoelectric smoke and heat detectorECO 1003 Photoelectric smoke detectorECO 1004T High Temperature 78C heat detector class BSECO 1005 Heat detector class A1RECO 1005T Fixed temperature heat detector class A2SKAC Alarm Company LtdMCP1A-Rxxxxx Indoor/outdoor surface/flush mountingconventional manual call pointNS4/R Sounder 4 tone wall mounting conventional (red)NS4/W Sounder 4 tone wall mounting conventional (white)NS14/R Sounder 14 tones wall mounting conventional (red)NS14/W Sounder 14 tones wall mounting conventional (white)LPCB Ref.No.154e/S118 Jan 2014 17

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTControl and Indicating Equipment (CIE) is a component of a fire detection and alarm system through whichother components may be connected to it such as detectors, manual call points, sounders, routing equipment,voice alarm equipment and fire protection equipment. It is supplied with power from power supply equipmentwhich may be housed within the CIE enclosure or a separate enclosure.CIE is used to receive and send out signals that are related to fire. CIE also monitors the system for faults(short and open circuit or power supply faults) and indicates the status of the fire detection and alarm system.CIE designed to meet a European standard such as EN 54-2 or international standard such as ISO 7240-2has certain options with requirements. For example, it may be designed to provide a signal to fire protectionequipment or have dependencies on more than one alarm signal. Some CIEs have other functions which arenot specified in the standard. These additional features are normally assessed such that they do notjeopardise compliance.The choice of CIE is dependent on the specific applications as recommended in the application guidelines fora specific job or building.Some CIEs have associated repeaters or mimic panels. These are normally used to repeat the indicationsgiven on the main CIE and sometimes they have control functions such as silencing sounders. There are nopublished standards that these repeaters or mimics can be tested against.Voice Alarm Control and Indicating Equipment (VACIE) is a component of the fire alarm system whichreceives signals from the CIE or via manual control in order to activate messages via loudspeakers. VACIEmay also include emergency microphone to broadcast live messages. The approval processes for this type ofequipment is outlined in scheme document SD040.This section lists Control and Indicating Equipment, Voice Alarm Control and Indicating Equipment and powersupply equipment approved for use in fire detection and fire alarm systems in buildings. Repeaters or mimicsthat are listed in this section are only approved with their associated CIE and are subjected to the sameenvironmental tests as the CIE. The approval processes for this type of equipment is outlined in schemedocument SD040.Products listed in this section have been approved to: EN 54-2: 1997 Control and Indicating Equipment; EN 54-2: 1997 + A1: 2006 Control and Indicating Equipment; EN 54-4: 1997 Power supply equipment; EN 54-4: 1997 + A1: 2002 and A2: 2006 Power supply equipment;ISO 7240-2: 2003 Control and Indicating Equipment;ISO 7240-4: 2003 Power supply equipment;EN 54-16:2008 Voice Alarm Control and Indicating Equipment.Audit:Regular product auditing and regular factory inspections are carried out by LPCB ensuring high manufacturingstandards and continued compliance with the applicable product standard.Notes:1. EN 54-2: 1997 is a harmonised standard for the Construction Products Directive and CE marking isrequired for most of the European market from 1 August 2009. It is therefore recommended that control andIndicating Equipment are certificated to EN 54-2: 1997 + A1: 20022. EN 54-4: 1997 is a harmonised standard for the Construction Products Directive and CE marking isrequired for most of the European market from 1 August 2009. It is therefore recommended that power supplyequipment are certificated to EN 54-4: 1997 + A1: 2002 and A2: 2006.3. Since the LPCB uses national and international standards for the listing of products, in some instances therequirements of these standards may conflict with the recommendations of local codes of practice. We18 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTrecommend that specifiers seek advice from the relevant local authorities and amend their specificationsaccordingly.4. Where the Control and Indicating Equipment is of modular construction, and the use of certain modules (orprinted circuit boards PCBs) is optional, these are listed with the applicable equipment.ADI (ADEMCO)Via della Resistenza, 53/59 20090 Buccinasco, Milano, ItalyTel: +3902457179229 • Fax: +390245701034E-mail: stefano.paoli@adiglobal.com • Website: www.adiglobal.comCertificate No: 429c-(cl-1) to EN 54-2: 1997 + A1: 2006, EN 54-4: 1997 + A1: 2002 + A2: 2006Control and indicating equipmentCertificated ProductsCXN-1-SSingle loop control and indicating equipment714-001-111 PANEL DXc1-S SINGLE LOOP REGION 1(UK & Iceland)714-001-112 PANEL DXc1-S SINGLE LOOP REGION 2(Iberia, India & ME)714-001-113 PANEL DXc1-S SINGLE LOOP REGION 3(Dutch, French, Italian, Slovenian)LPCB Ref.No.429c/13CXN-2-MCXN-4-MIncorporating as modular units:124-410-001 Base PCB 1 Loop124-411 Display PCB010-115 PSU RS-50-24Two loop control and indicating equipment714-001-221 PANEL DXc2-M TWO LOOP REGION 1(UK & Iceland)714-001-222 PANEL DXc2-M TWO LOOP REGION 2(Iberia, India & ME)714-001-223 PANEL DXc2-M TWO LOOP REGION 3(Dutch, French, Italian, Slovenian)Four loop control and indicating equipment714-001-241 PANEL DXc4-M FOUR LOOP REGION 1 (UK & Iceland)714-001-242 PANEL DXc4-M FOUR LOOP REGION 2 (Iberia, India & ME)714-001-243 PANEL DXc4-M FOUR LOOP REGION 3(Dutch, French, Italian, Slovenian)Incorporating as modular units:124-410 Base PCB 2 Loop124-411 Display PCB124-417 2 Loop PCB010-116 PSU RS-100-24Incorporating as optional modular units:795-099 KIT DXc NETWORK CARD795-102 KIT DXc 40 ZONE LED CARD795-103 KIT DXc 80 ZONE LED CARD WITH COVER795-111 KIT DXc 2 LOOP EXPANSION CARD (Applicable to the two loop CIE only)795-117 KIT DXc PERFORMANCE CARD795-118 KIT DXc KEYSWITCH795-122 KIT DXc RS232795-123 KIT DXc RS485795-124 KIT DXc 80 ZONE LED CARDCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.11 Delays to outputs7.12.3 Dependencies on more than one alarm signal-Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each addressable point10 Test conditionNotes:1. This product approval does not constitute compliance with the fire detection429c/14429c/1518 Jan 2014 19

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsCXN-1-Mand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.Single loop control and indicating equipment714-001-111 PANEL DXc1-S SINGLE LOOP REGION 1 (UK &Iceland)714-001-112 PANEL DXc1-S SINGLE LOOP REGION 2(Iberia, India & ME)714-001-113 PANEL DXc1-S SINGLE LOOP REGION 3(Dutch, French, Italian, Slovenian)714-001-114 PANEL DXc1-S SINGLE LOOP REGION 4(German)LPCB Ref.No.429c/16Incorporating as modular units:124-410-001 Base PCB 1 Loop124-411 Display PCB010-115 PSU RS-50-24Advanced Electronics Limited34 Moorland Way, Nelson Park, Cramlington, Northumberland NE23 1WE, United KingdomTel: +44 (0)1670 707 111 • Fax: +44 (0)1670 707 222E-mail: ksewell@advel.co.uk • Website: www.Advel.co.ukCertificate No: 018c to EN 54:Part 2 and 4: 1997Certificate No: 544b to EN54-2: 1997+A1:2006 EN54-4: 1997+A1-2002+A2:2006Control and indicating equipmentCertificated ProductsMx-1002Mx-1004Mx-10082 zone conventional control and indicating equipmentIncorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface board (option)Certified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition4 zone conventional control and indicating equipmentIncorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface board (option)Certified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition8 zone conventional control and indicating equipmentIncorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface board (option)Certified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test conditionLPCB Ref.No.018c/02018c/03018c/0420 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsMx-1016Mx-1032Mx-1108Mx-1116Mx-1132QuickZoneQuickZone XL16 zone conventional control and indicating equipmentIncorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface board (option)Certified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition32 zone conventional control and indicating equipmentIncorporating as modular units:C1627 Mother boardC1629 Display boardC1632 16 Zone Expansion boardC1652 5A Power supply boardC1631 Repeater interface board (option)Certified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition8 zone conventional repeater unitIncorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface board16 zone conventional repeater unitIncorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface board32 zone conventional repeater unitIncorporating as modular units:C1627 Mother boardC1629 Display boardC1631 Repeater interface board2 and 4 Zone conventional control and indicating equipmentQuickZone 2 (QZ-2)Incorporating as modular units:TPC A01- QuickZone 2 (QZ-2) main PCB applicable on 2 zone CIE onlyTPC A02 QuickZone LED display PCBPSM1.5 - 24 Power supply 1.5A ratedCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.12.1 Dependency on more than one alarm signal type A10 Test conditionQuickZone 4 (QZ-4)Incorporating as modular units:TPC A01- Quick Zone 4 (QZ-4) main PCB applicable on 4 zone CIE onlyTPC A02 QuickZone LED display PCBPSM1.5 - 24 Power supply 1.5A ratedCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.12.1 Dependency on more than one alarm signal type A10 Test conditionNote:1. This product approval does not constitute compliance with the firedetection and alarm systems requirements of EN 54-13.4, 8 and 12 Zone conventional control and indicating equipmentQuickZoneXL 4 Conventional Control Panel (QZXL-4)Incorporating as modular units:TPCA01-X4 QuickZoneXL 4 Zone Main PCBTPCA03 QuickZoneXL Display BoardPSM3.0-24 Power SupplyLPCB Ref.No.018c/05018c/06018c/R01018c/R02018c/R03544b/01544b/0218 Jan 2014 21

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsQuickZoneXL 8 Conventional Control Panel (QZXL-8)Incorporating as modular units:TPCA01-X4 QuickZoneXL 4 Zone Main PCBTPCA03 QuickZoneXL Display BoardQZXL-ZEC QuickZoneXL Standard 4 Zone Extension BoardPSM3.0-24 Power SupplyQuickZoneXL 8 Conventional Control Panel (QZXL-8HS)Incorporating as modular units:TPCA01-X4 QuickZoneXL 4 Zone Main PCBTPCA03 QuickZoneXL Display BoardQZXL-HSZEC QuickZoneXL High Spec 4 Zone Extension BoardPSM3.0-24 Power SupplyQuickZoneXL 12 Conventional Control Panel (QZXL-12)TPCA01-X4 QuickZoneXL 4 Zone Main PCBTPCA03 QuickZoneXLDisplay BoardQZXL-ZEO QuickZoneXL Standard 4 Zone Extension BoardQZXL-ZEC QuickZoneXL High Spec 4 Zone Extension BoardPSM3.0-24 Power SupplyQuickZoneXL 12 Zone Conventional Control Panel (QZXL-12HS)TPCA01-X4 QuickZoneXL 4 Zone Main PCBTPCA03 QuickZoneXL Display BoardQZXL-HSZEC Two QuickZoneXL Standard 4 Zone Extension BoardPSM3.0-24 Power SupplyCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs7.12.1 Dependency on more than one alarm signal type A7.12.2 Dependency on more than one alarm signal type B7.12.3 Dependency on more than one alarm signal type C10 Test conditionNote:1. This product approval does not constitute compliance with the firedetection and alarm systems requirements of EN 54-13.LPCB Ref.No.Ajax Chubb Varel B.V.Cruquiusweg 118, 1019 AK, Amsterdam, The NetherlandsTel: +31205909500 • Fax: +31205909599E-mail: info@ajaxchubbvarel.nl • Website: www.ajaxchubbvarel.nlCertificate No: 176b to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated Products809-250450 Two zone conventional control and indicating equipmentLPCB Ref.No.176b/10Incorporating the units:RPF0702005 Power supply PCBSPF0724851 2 Zone main control boardCertified with the following options with requirements from EN 54-2: 19977.8 Output to fire alarm devices(s)7.11 Delays to outputs10 Test condition809-250451 Four zone conventional control and indicating equipment176b/11Incorporating the units:RPF0702005 Power supply PCBSPF0724853 4 Zone main control boardCertified with the following options with requirements from EN 54-2: 19977.8 Output to fire alarm devices(s)7.11 Delays to outputs22 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products10 Test condition809-250452 Eight zone conventional control and indicating equipmentLPCB Ref.No.176b/12Incorporating the units:RPF0702005 Power supply PCBSPF0724855 8 Zone main control boardCertified with the following options with requirements from EN 54-2: 19977.8 Output to fire alarm devices(s)7.11 Delays to outputs10 Test conditionAMPAC Europe LimitedUnit 2, Waterbrook Estate, Waterbrook Road, Alton, Hampshire GU34 2UD, United KingdomTel: +44 (0)1420 592070 • Fax: +44 (0)1420 592071E-mail: info.eu@ampac.net • Website: www.ampac.netCertificate No: 952a to EN54-2: 1997 + A1: 2006 and EN54-4: 1997 + A1: 2002 + A2: 2006Certificate No: 952b to EN 54-2: 1997 + A1: 2006, EN 54-4: 1998 + A1: 2002 + A2: 2006Certificate No: 810a-(cl-1) to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006Control and Indicating EquipmentCertificated ProductsZonefinder2 and 4 Zone conventional control and indicating equipment2183-0201, 2 Zone conventional control and indicating equipmentLPCB Ref.No.810a/03Zonefinder PlusIncorporating as modular units:TPC A01- E2 ZoneFinder two zone main PCB applicable on 2 zone CIE onlyTPC A02 ZoneFinder LED display PCBPSM1.5 - 24 Power supply 1.5A ratedCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.12.1 Dependency on more than one alarm signal type A10 Test condition2183-0401, 4 Zone conventional control and indicating equipmentIncorporating as modular units:TPC A01- E4 ZoneFinder four zone main PCB applicable on 4 zone CIE onlyTPC A02 ZoneFinder LED display PCBPSM1.5 - 24 Power supply 1.5A ratedCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.12.1 Dependency on more than one alarm signal type A10 Test conditionNote:1. This product approval does not constitute compliance with the firedetection and alarm systems requirements of EN 54-13.2, 4, 6, 8 and 12 Zone conventional control and indicating equipment2183-0202, 2 Zone Conventional Control PanelIncorporating as modular units:TPCA01-X 2 ZoneFinder Plus 2 Zone Main PCBTPCA03 ZoneFinder Plus Display BoardPSM3.0-24 Power Supply810a/0418 Jan 2014 23

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products2183-0402, 4 Zone Conventional Control PanelIncorporating as modular units:TPCA01-X4 ZoneFinder Plus 4 Zone Main PCBTPCA03 ZoneFinder Plus Display BoardPSM3.0-24 Power Supply2183-0604, 6 Zone Conventional Control PanelIncorporating as modular units:TPCA01-X2 ZoneFinder Plus 2 Zone Main PCBTPCA03 ZoneFinder Plus Display BoardTPCA04-H ZoneFinder Plus High Spec 4 Zone Extension BoardPSM3.0-24 Power Supply2183-0602, 6 Zone Conventional Control PanelIncorporating as modular units:TPCA01-X2 ZoneFinder Plus 2 Zone Main PCBTPCA03 ZoneFinder Plus Display BoardTPCA04-S ZoneFinder Plus Standard 4 Zone Extension BoardPSM3.0-24 Power Supply2183-0804, 8 Zone Conventional Control PanelIncorporating as modular units:TPCA01-X4 ZoneFinder Plus 4 Zone Main PCBTPCA03 ZoneFinder Plus Display BoardTPCA04-H ZoneFinder Plus High Spec 4 Zone Extension BoardPSM3.0-24 Power Supply2183-0802, 8 Zone Conventional Control PanelIncorporating as modular units:TPCA01-X4 ZoneFinder Plus 4 Zone Main PCBTPCA03 ZoneFinder Plus Display BoardTPCA04-S ZoneFinder Plus Standard 4 Zone Extension BoardPSM3.0-24 Power Supply2183-1204, 12 Zone Conventional Control PanelIncorporating as modular units:TPCA01-X4 ZoneFinder Plus 4 Zone Main PCBTPCA03 ZoneFinder Plus Display BoardTPCA04-S Qty 2x ZoneFinder Plus High Spec 4 Zone Extension BoardTPCA04-H ZoneFinder Plus High Spec 4 Zone Extension BoardPSM3.0-24 Power Supply2183-1202, 12 Zone Conventional Control PanelIncorporating as modular units:TPCA01-X4 ZoneFinder Plus 4 Zone Main PCBTPCA03 ZoneFinder Plus Display BoardTPCA04-S ZoneFinder Plus Standard 4 Zone Extension BoardPSM3.0-24 Power Supply2183-1206 12 Zone Conventional Control PanelIncorporating as modular units:TPCA01-X4 ZoneFinder Plus 4 Zone Main PCBTPCA03 ZoneFinder Plus Display BoardTPCA04-H Qty 2x ZoneFinder Plus High Spec 4 Zone Extension BoardPSM3.0-24 Power SupplyCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs7.12.1 Dependency on more than one alarm signal type A7.12.2 Dependency on more than one alarm signal type B7.12.3 Dependency on more than one alarm signal type C10 Test conditionLPCB Ref.No.24 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsLoopSense 8281-0105LoopSense 8281-0205Note:1. This product approval does not constitute compliance with the firedetection and alarm systems requirements of EN 54-13.One loop, 32 Zone analogue addressable control and indicating equipment.Incorporating the following units:BRD82MBA Main Termination BoardBRD82ZICC Zone Interface & Control CardPSU2397 Power Supply UnitASS82ZICC Zone Indicator & LCD Assembly (8210)Certificated with the following options with requirements from EN54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.11 Delay to outputs7.12.1 Dependencies on more than one alarm signal Type A7.12.2 Dependencies on more than one alarm signal Type B7.12.3 Dependencies on more than one alarm signal Type C8.3 Fault signal from points8.9 Output to fault warning routing equipment9.5 Disablement of each addressable point10 Test conditionNote:1. This product approval does not constitute compliance with the fire detection andalarm systems requirements of EN 54-13.Two loop, 32 Zone analogue addressable control and indicating equipment.Incorporating the following units:BRD82MBA Main Termination BoardBRD82ZICC Zone Interface & Control CardPSU2397 Power Supply Unit8210-0001 2nd loop activation KeyBRD82LSD Loop Activation BoardASS82ZICC Zone Indicator & LCD Assembly (8210)Certificated with the following options with requirements from EN54-2:LPCB Ref.No.952a/01952a/027.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.11 Delay to outputs7.12.1 Dependencies on more than one alarm signal Type A7.12.2 Dependencies on more than one alarm signal Type B7.12.3 Dependencies on more than one alarm signal Type C8.3 Fault signal from points8.9 Output to fault warning routing equipment9.5 Disablement of each addressable point10 Test conditionNote:1. This product approval does not constitute compliance with the fire detection andalarm systems requirements of EN 54-13.8681-0108 FireFinder Plus One loop, 32 Zone analogue addressable control and indicating equipment952b/01Incorporating as modular units:BRD68BPSC4-A FFP Brigade & Power supply control board (8610)BRD86DLTB4-A FFP Dual loop termination board (8610)BRD86FPB5-B FFP Front panel board EN54 (8610)BRD86MBA4-A FFP Main board LCD (8610)BRD86MCPU4-B FFP Main 64MB CPU card (8610)BRD43ZAMC2-A 32 Zone alarm MIMIC internal card (4310)PSU1888 Power supply 5A (8610)Optional Modules:BRD43EZC2-A 8 Zone conventional module (4310)BRD43ZAMC2-A 32 Zone alarm MIMIC internal card (4310)18 Jan 2014 25

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsCertified with the following options with requirements from EN 54-2:LPCB Ref.No.7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routine equipment7.11 Delay to outputs7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C8.3 Fault signal from points8.9 Output to fault warning routing equipment9.5 Disablement of each addressable point10 Test condition8681-0208 FireFinder Plus Two loop, 32 Zone analogue addressable control and indicating equipment952b/02Incorporating as modular units:BRD68BPSC4-A FFP Brigade & Power supply control board (8610)BRD86DLTB4-A FFP Dual loop termination board (8610)BRD86FPB5-B FFP Front panel board EN54 (8610)BRD86MBA4-A FFP Main board LCD (8610)BRD86MCPU4-B FFP Main 64MB CPU card (8610)BRD86SCB3-A FFP Slave CPU card (8610)BRD43ZAMC2-A 32 Zone alarm MIMIC internal card (4310)PSU1888 Power supply 5A (8610)Optional Modules:BRD43EZC2-A 8 Zone conventional module (4310)BRD43ZAMC2-A 32 Zone alarm MIMIC internal card (4310)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routine equipment7.11 Delay to outputs7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C8.3 Fault signal from points8.9 Output to fault warning routing equipment9.5 Disablement of each addressable point10 Test condition8681-0308 FireFinder Plus Three loop, 32 Zone analogue addressable control and indicating equipment952b/03Incorporating as modular units:BRD68BPSC4-A FFP Brigade & Power supply control board (8610)BRD86DLTB4-A FFP Two Dual loop termination boards (8610)BRD86FPB5-B FFP Front panel board EN54 (8610)BRD86MBA4-A FFP Main board LCD (8610)BRD86MCPU4-B FFP Main 64MB CPU card (8610)BRD86SCB3-A FFP Two Slave CPU cards (8610)BRD43ZAMC2-A 32 Zone alarm MIMIC internal card (4310)PSU1888 Power supply 5A (8610)Optional Modules:BRD86DLTB4-A FFP Dual loop termination board (8610)BRD86SCB3-A FFP Slave CPU cards (8610)BRD43EZC2-A 8 Zone conventional module (4310)BRD43ZAMC2-A 32 Zone alarm MIMIC internal card (4310)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routine equipment7.11 Delay to outputs7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C8.3 Fault signal from points26 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products8.9 Output to fault warning routing equipment9.5 Disablement of each addressable point10 Test condition8681-0408 FireFinder Plus Four loop, 32 Zone analogue addressable control and indicating equipmentLPCB Ref.No.952b/04Incorporating as modular units:BRD68BPSC4-A FFP Brigade & Power supply control board (8610)BRD86DLTB4-A FFP Two Dual loop termination boards (8610)BRD86FPB5-B FFP Front panel board EN54 (8610)BRD86MBA4-A FFP Main board LCD (8610)BRD86MCPU4-B FFP Main 64MB CPU card (8610)BRD86SCB3-A FFP Three Slave CPU cards (8610)BRD43ZAMC2-A 32 Zone alarm MIMIC internal card (4310)PSU1888 Power supply 5A (8610)Optional Modules:BRD86DLTB4-A FFP Dual loop termination board (8610)BRD86SCB3-A FFP Slave CPU cards (8610)BRD43EZC2-A 8 Zone conventional module (4310)BRD43ZAMC2-A 32 Zone alarm MIMIC internal card (4310)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routine equipment7.11 Delay to outputs7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C8.3 Fault signal from points8.9 Output to fault warning routing equipment9.5 Disablement of each addressable point10 Test conditionAMPAC Technologies PTY Ltd7 Ledgar Road, Balcatta 6021, AustraliaTel: +618 (9242) 3333 • Fax: +618 (9242) 3334E-mail: info@ampac.net • Website: www.ampac.netCertificate No: 966a to EN 54-2: 1997 + A1: 2006, EN 54-4: 1997 + A1: 2002 + A2: 2006Certificate No: 966b to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1998 + A1: 2002 + A2: 2006Certificated ProductsLoopSense 8281-0105One loop, 32 Zone analogue addressable control and indicating equipment.Incorporating the following units:BRD82MBA Main Termination BoardBRD82ZICC Zone Interface & Control CardPSU2397 Power Supply UnitASS82ZICC Zone Indicator & LCD Assembly (8210)Certificated with the following options with requirements from EN54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.11 Delay to outputs7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C8.3 Fault signal from points8.9 Output to fault warning routing equipmentLPCB Ref.No.966a/0118 Jan 2014 27

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsLoopSense 8281-02059.5 Disablement of each addressable point10 Test conditionNote:1. This product approval does not constitute compliance with the fire detection andalarm systems requirements of EN 54-13.Two loop, 32 Zone analogue addressable control and indicating equipment.Incorporating the following units:BRD82MBA Main Termination BoardBRD82ZICC Zone Interface & Control CardPSU2397 Power Supply Unit8210-0001 2nd loop activation KeyBRD82LSD Loop Activation BoardASS82ZICC Zone Indicator & LCD Assembly (8210)Certificated with the following options with requirements from EN54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.11 Delay to outputs7.12.1 Dependencies on more than one alarm signal Type A7.12.2 Dependencies on more than one alarm signal Type B7.12.3 Dependencies on more than one alarm signal Type C8.3 Fault signal from points8.9 Output to fault warning routing equipment9.5 Disablement of each addressable point10 Test conditionNote:1. This product approval does not constitute compliance with the fire detection andalarm systems requirements of EN 54-13.LPCB Ref.No.966a/028681-0108 FireFinder Plus One loop, 32 Zone analogue addressable control and indicating equipment966b/01Incorporating as modular units:BRD68BPSC4-A FFP Brigade & Power supply control board (8610)BRD86DLTB4-A FFP Dual loop termination board (8610)BRD86FPB5-B FFP Front panel board EN54 (8610)BRD86MBA4-A FFP Main board LCD (8610)BRD86MCPU4-B FFP Main 64MB CPU card (8610)BRD43ZAMC2-A 32 Zone alarm MIMIC internal card (4310)PSU1888 Power supply 5A (8610)Optional Modules:BRD43EZC2-A 8 Zone conventional module (4310)BRD43ZAMC2-A 32 Zone alarm MIMIC internal card (4310)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routine equipment7.11 Delay to outputs7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C8.3 Fault signal from points8.9 Output to fault warning routing equipment9.5 Disablement of each addressable point10 Test condition8681-0208 FireFinder Plus Two loop, 32 Zone analogue addressable control and indicating equipment966b/02Incorporating as modular units:BRD68BPSC4-A FFP Brigade & Power supply control board (8610)BRD86DLTB4-A FFP Dual loop termination board (8610)BRD86FPB5-B FFP Front panel board EN54 (8610)BRD86MBA4-A FFP Main board LCD (8610)BRD86MCPU4-B FFP Main 64MB CPU card (8610)BRD86SCB3-A FFP Slave CPU card (8610)BRD43ZAMC2-A 32 Zone alarm MIMIC internal card (4310)28 18 Jan 2014

Certificated ProductsPSU1888 Power supply 5A (8610)PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTLPCB Ref.No.Optional Modules:BRD43EZC2-A 8 Zone conventional module (4310)BRD43ZAMC2-A 32 Zone alarm MIMIC internal card (4310)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routine equipment7.11 Delay to outputs7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C8.3 Fault signal from points8.9 Output to fault warning routing equipment9.5 Disablement of each addressable point10 Test condition8681-0308 FireFinder Plus Incorporating as modular units:966b/03BRD68BPSC4-A FFP Brigade & Power supply control board (8610)BRD86DLTB4-A FFP Two Dual loop termination boards (8610)BRD86FPB5-B FFP Front panel board EN54 (8610)BRD86MBA4-A FFP Main board LCD (8610)BRD86MCPU4-B FFP Main 64MB CPU card (8610)BRD86SCB3-A FFP Two Slave CPU cards (8610)BRD43ZAMC2-A 32 Zone alarm MIMIC internal card (4310)PSU1888 Power supply 5A (8610)Optional Modules:BRD86DLTB4-A FFP Dual loop termination board (8610)BRD86SCB3-A FFP Slave CPU cards (8610)BRD43EZC2-A 8 Zone conventional module (4310)BRD43ZAMC2-A 32 Zone alarm MIMIC internal card (4310)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routine equipment7.11 Delay to outputs7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C8.3 Fault signal from points8.9 Output to fault warning routing equipment9.5 Disablement of each addressable point10 Test condition8681-0408 FireFinder Plus Four loop, 32 Zone analogue addressable control and indicating equipment966b/04Incorporating as modular units:BRD68BPSC4-A FFP Brigade & Power supply control board (8610)BRD86DLTB4-A FFP Two Dual loop termination boards (8610)BRD86FPB5-B FFP Front panel board EN54 (8610)BRD86MBA4-A FFP Main board LCD (8610)BRD86MCPU4-B FFP Main 64MB CPU card (8610)BRD86SCB3-A FFP Three Slave CPU cards (8610)BRD43ZAMC2-A 32 Zone alarm MIMIC internal card (4310)PSU1888 Power supply 5A (8610)Optional Modules:BRD86DLTB4-A FFP Dual loop termination board (8610)BRD86SCB3-A FFP Slave CPU cards (8610)BRD43EZC2-A 8 Zone conventional module (4310)BRD43ZAMC2-A 32 Zone alarm MIMIC internal card (4310)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment18 Jan 2014 29

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products7.9.2 Alarm confirmation input from fire alarm routine equipment7.11 Delay to outputs7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C8.3 Fault signal from points8.9 Output to fault warning routing equipment9.5 Disablement of each addressable point10 Test conditionLPCB Ref.No.Application Solutions (Safety and Security) Ltd, East Sussex, United KingdomUnit 17 Cliffe Industrial Estate, Lewes, East Sussex BN8 6JL, United KingdomTel: +44 (0) 1273 405411 • Fax: +44(0) 1273 405415E-mail: sales@asl-control.co.uk • Website: www.asl-control.co.ukCertificate No: 1043a to EN 54-16: 2008 and EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsASL Rack mount voicealarm systemIncorporating the following modules:VAR8-ACU(EN54) Network master 8x8 routerVAR8(EN54) Standalone 8x8 routerVAR8-E(EN54)" Standalone 8x8 router with expansion boardVAR4(EN54) Standalone 4x4 routerVAR12(EN54) Standalone 12x12 routerVAR20(EN54) Standalone 20x20 routerVAR-NIA Network Interface AdaptorVIPEDIA-12 Professional Sound Life-Safety Digital Audio SystemBOA01 DIN Rail MountVAR8 Optional modules:EFI01 Analogue input and digital output boardGENT Interface Interface for VAR8-E to GENT Fire LoopVAR-ANIC Network interface for VAR8(EN54), VAR8-E(EN54) andVAR8-ACU(EN54)VAR8-EXP8 Converts VAR8(EN54) to VAR8-E(EN54)LPCB Ref.No.1043a/01V400V400Amplifier frame:Amplifier frame for housing M series amplifiers and amplifier interfacesM series amplifiers:M100 100W AmplifierM200 200W AmplifierM400 400W AmplifierAmplifier interfaces for V400 mainframe:LSDDC Dual DC line surveillance interface with loop return optionSSINT Standby amplifier interfaceX400 Amplifier frame:X400 Amplifier frame for housing MX series amplifiersMX series amplifiers:MX100 100W AmplifierMX200 200W AmplifierMX400 400W AmplifierPower supply:BPC65 65AH output power supplyBPC130 130AH Output power supplyBDIST Battery distribution terminalsMDIST Main distribution panelOptional modules:BMB01 Remote I/O expander unit30 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsFMS1 Firemans microphone - All callFMS5 Zoneable Firemans remote microphone - 5 buttonsFMS10 Zoneable Firemans remote microphone - 10 buttonsFMS20 Zoneable Firemans remote microphone - 20 buttonsEMS01 Emergency microphone and accessible Mimic display for routersEMS01-EC Emergency microphone and accessible Mimic display for routerswith euro-cylinder lockEMS01-MT EMS01 with an all-call button used to trigger an evacuationmessageEAP01 Emergency access point - All call emergency microphoneMT01 Voice alarm manual triggerEMS01(MK2) Emergency microphone station - All callEMS01-EC(MK2) Emergency microphone station - All call with euro-cylinder lockEMS10 Emergency microphone station - 10 ButtonEMS10-EC Emergency microphone station - 10 Button with euro-cylinder lockEMS20Emergency microphone station - 20 ButtonEMS20-EC Emergency microphone station - 20 Button with euro-cylinder lockEMS30 Emergency microphone station - 30 ButtonEMS40 Emergency microphone station - 40 ButtonEMS50Emergency microphone station - 50 ButtonEMX30Expansion module for EMS20 - 30 ButtonMPS01-FDesk paging and emergency microphone - 1 Button - Fist micMPS01-G Desk paging and emergency microphone - 1 Button -Gooseneck micMPS10-FDesk paging and emergency microphone - 10 Button - Fist micMPS10-G Desk paging and emergency microphone - 10 Button -Gooseneck micMPS20-FDesk paging and emergency microphone - 20 Button - Fist micMPS20-G Desk paging and emergency microphone - 20 Button -Gooseneck micMPS30-FDesk paging and emergency microphone - 30 Button - Fist micMPS30-G Desk paging and emergency microphone - 30 Button -Gooseneck micMPS40-FDesk paging and emergency microphone - 40 Button - Fist micMPS40-G Desk paging and emergency microphone - 40 Button -Gooseneck micMPS50-FDesk paging and emergency microphone - 50 Button - Fist micMPS50-G Desk paging and emergency microphone - 50 Button -Gooseneck micMPX10Microphone expansion module for MPS01 - 10 ButtonMPS01-MB Wall mount bracket kit for MPS01LPCB Ref.No.Certified with the following options with requirements from EN 54 Part 16:7.6.2 Manual silencing of voice alarm condition7.7.2 Manual reset of the voice alarm condition7.9 Voice alarm condition output8.3 Indication of faults related to the transmission path to the CIE (Not applicableon the GENT Interface)8.4 Indication of faults related to voice alarm zones10.0 Voice Alarm Manual control12.0 Emergency microphone(s)13.14 Redundant power amplifiersBardic by Honeywell (Novar Systems Ltd)140 Waterside Road, Hamilton Industrial Estate, Leicester LE5 1TN, United KingdomTel: +44 (0) 116 246 2212 • Fax: +44 (0) 116 246 2210Website: www.bardic.co.ukCertificate No: 154g-(cl-3) to EN 54-2: 1997 + A1: 2006, EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsLPCB Ref.No.Zircon 2 Zone 002-509-229 Bardic Zircon, 2 zone, region 2, black grey 154g/06Incorporating the following units:020-747 8-way relay kit18 Jan 2014 31

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products020-772 4-way monitored sounder kitLPCB Ref.No.Certified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Output to automatic fire protection equipment: Type A7.10.3 Output to automatic fire protection equipment: Type C7.10.4 Fault monitoring of fire protection equipment7.11.1 Delays to outputs7.11.2 Manual or automatic switching of delays to outputs7.12.2 Dependency on more than one alarm signal: Type B8.9 Output to fault warning routing equipment10 Test conditionZircon 4 Zone 002-509-249 Bardic Zircon, 4 zone, region 2, black grey 154g/07Incorporating the following units:020-747 8-way relay kit020-772 4-way monitored sounder kitCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Output to automatic fire protection equipment: Type A7.10.3 Output to automatic fire protection equipment: Type C7.10.4 Fault monitoring of fire protection equipment7.11.1 Delays to outputs7.11.2 Manual or automatic switching of delays to outputs7.12.2 Dependency on more than one alarm signal: Type B8.9 Output to fault warning routing equipment10 Test conditionZircon 8 Zone 002-509-289 Bardic Zircon, 8 zone, region 2, black grey 154g/08Incorporating the following units:020-747 8-way relay kit020-772 4-way monitored sounder kitCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Output to automatic fire protection equipment: Type A7.10.3 Output to automatic fire protection equipment: Type C7.10.4 Fault monitoring of fire protection equipment7.11.1 Delays to outputs7.11.2 Manual or automatic switching of delays to outputs7.12.2 Dependency on more than one alarm signal: Type B8.9 Output to fault warning routing equipment10 Test conditionBiamp Systems Corporation9300 S.W. Gemini Drive, Beaverton, Oregon 97008, USATel: +1 503 718 9212 • Fax: +1 503 626 0281Website: www.biamp.comCertificate No: 977a to EN 54-16: 2008Certificated ProductsVocia VACIEVoice Alarm Control and Indicating EquipmentIncorporating:LSI-16 / LSI-16e Life Safety Interface:700-P630-9 LSI-16 / LSI-16e Main Board700-P632-9 LSI-16 / LSI-16e Display Board700-P675-9 IM-16 Input Module700-P644-9 LSI-16 / LSI-16e Power Supply BoardLPCB Ref.No.977a/0132 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsLPCB Ref.No.VA-8600c Amplifier:700-0646-9 VA-8600 AM-600c Amplifier Module700-0601-9 VA-8600 NM-1 Network Module700-0598-9 VA-8600 Back Plane Board700-0599-9 VA-8600 Power Supply Board700-0633-9 VA-8600 Capacitor Board700-0629-9 VA-8600 AC Inlet Board700-0602-9 VA-8600 Display Board700-P622-9 VA-8600 Device ID Board700-P800-9 VFOM-1 Voice Fail Over ModuleVA-4030e Amplifier:700-0675-9 VPA-1 Amplifier Module700-0677-9 VSW-1 Transformer Switch Board700-P680-9 VNM-1 Network Module700-0687-9 VAS-1 Aux DC Power Supply700-0672-9 EIC-4 Input Module700-P681-9 VAD-1 Display BoardVA-4030 Amplifier:700-0675-9 VPA-1 Amplifier Module700-0677-9 VSW-1 Transformer Switch Board700-P680-9 VNM-1 Network Module700-P684-9 VAD-2 Display BoardVA-2060e Amplifier:700-0676-9 VPA-2 Amplifier Module700-0686-9 VSW-1 Transformer Switch Board700-P680-9 VNM-1 Network Module700-0687-9 VAS-1 Aux DC Power Supply700-0689-9 EIC-2 Input Module700-P685-9 VAD-3 Display BoardVA-2060 Amplifier:700-0676-9 VPA-2 Amplifier Module700-0686-9 VSW-1 Transformer Switch Board700-P680-9 VNM-1 Network Module700-P686-9 VAD-4 Display BoardWS-4 (EWS-4) Paging Micro phone:700-P625-9 WS Main Board700-P676-9 WS-4 (EWS-4) Switch BoardWS-10 (EWS-10) Paging Microphone:700-P625-9 WS Main Board700-P776-9 WS-10 (EWS-10) Switch BoardCI-1 Control Interface:700-P669-9 CI-1 Main BoardCertified with the following options with requirements from EN 54-16:7.3 Audible warning7.5 Phased evacuation7.9 Voice alarm condition output8.3 Indication of faults related to the transmission path to the CIE12 Emergency microphone13.14 Redundant power amplifiersNote: The certification is conditional upon the Vocia VACIE being supplied with powerfrom power supplies that meet the specifications detailed in the VOCIA Reference Guide,and comply with the requirements of EN 54-4.18 Jan 2014 33

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTBosch Security Systems BVTorenalle 49, Eindhoven 5617BA, The NetherlandsTel: +31 76 5721 240 • Fax: +31 76 5716 626E-mail: ruud.leurs@nl.bosch.com • Website: www.boschsecurity.comCertificate No: 1054a-(cl-1) to EN 54-16: 2008Certificated ProductsPROMATRIX 8000Voice Alarm SystemIncorporating the following modules:DPM 8016 Promatrix controllerDPM AO-1 Analog audio output moduleDPM UI-1 Universal audio input moduleDPA 8150 1 x 500W Power amplifierDPA 8225 2 x 250W Power amplifierDPA 8412 4 x 125W Power amplifierDPC 8015 Call stationDCS 400 DCS 19" Mounting FrameDCS 801R Conrtroller ModuleDCS 406R Shield ModuleDCS 407R AF Relay Module ExtDCS 408R Loudspeaker relay ModuleDCS 409R AF Relay ModuleDCS 412R Logic Input ModuleDCS 416R Analog I/O ModuleNRS90231 Key lock switchEB DPC Emergency button DPC 8000 seriesDPC 8120 Call station extensionLBB1965 Plena message managerPLN-1EOL End Of Line BoardEOL 8001 End Of Line BoardP 64 Digital Audio MatrixN8000 Netmax System ControllerAI-1 Analog Audio Input ModuleAO-1 Analog Audio Output ModuleMI-1 Microphone Input ModuleCM-1 Cobranet Network ModuleDM-1 Dante Network ModuleDSP-1 DSP Extension Module 300 MipsDSP-2V2 DSP Extension Module 1500 MipsDSA 8405 4 X 500 W Power AmplifierDSA 8410 4 X 1000 W Power AmplifierDSA 8805 8 X 500 W Power AmplifierCPS4.5 4 X 500 W Power AmplifierCPS4.10 4 X 1000 W Power AmplifierCPS8.5 8 X 500 W Power AmplifierRCM-810 Remote Control ModuleLML-1 Line Measuring LoadCertified with the following options with requirements from EN 54 Part 16:7.6.2 Manual silencing of the voice alarm condition7.7.2 Manual reset of the voice alarm condition7.9 Voice alarm condition output8.3 Indication of faults related to the transmission path to the CIE8.4 Indication of faults related to voice alarm zones10 Voice alarm manual control12 Emergency microphone(s)13.14 Redundant power amplifierLPCB Ref.No.1054a/01Note:The certificate is conditional upon the PROMATRIX 8000 VOICE ALARM SYSTEM beingsupplied with power from power supplies that meet the power specifications detailed inthe owner manuals of the certified modules, and which complies with the requirements ofEN54-4.34 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTBuilding Protection Systems (NI) Limited1 Pilot's View, Sydenham Business Park, Heron Road, Belfast Harbour Estate, Belfast BT3 9LE, IrelandTel: 00442890455111 • Fax: 00442890466111E-mail: c.adams@bpsni.co.uk • Website: www.bpsni.co.ukCertificate No: 154g-(cl-4) to EN 54-2: 1997 + A1: 2006 & EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsMach 2.8Basic Equipment Kit, (BEK): Modular analogue addressablecontrol and indicating equipment020-538-501 Basic Equipment Kit, Group 0Incorporating the following as modular units:Enclosures:020-472-009 Backbox Kit Standard020-473-009 Backbox Kit Extended, Black / Grey020-474-009 Backbox Kit Extended Deep, Black / Grey020-475-009 Backbox Kit Double Extended, Black / Grey020-476-009 Backbox Kit Double Extended Deep, Black / Grey020-480-501 Cover Kit Main Moulded, Black / Grey020-481-009 Cover Kit Extended Moulded, Black / Grey020-508-009 Backbox Extension Standard Assembly Black / Grey020-509-009 Backbox Extension Deep Assembly Black / Grey020-576 Main Cover, Stainless Steel020-577 Extension Cover Stainless Steel020-621 Zone Extension Cover, Stainless / Steel020-621-009 256 Zone Extension Cover, Black / Grey020-541-501 PSU7A / 78Ah Battery EnclosureModules:020-559-001 Zone Extension Chassis Kit 1-64 Zone C/W Display Module020-559-002 Zone Extension Chassis Kit 65-128 Zone C/W Display Module020-612 Double Extended Chassis Kit 256 Zone020-708-009 Extension Chassis with Printer020-644-009 Printer Assembly020-588 Notifier Dual Loop Interface Board, (LIB)020-549 Notifier Dual Enhanced Loop Interface Board, (ELIB)020-478 RS232 Interface020-479 RS485 Interface020-648 PSU3A020-579 PSU7A, (Requires Dual Transmission Path / Booster, PSU Interface)020-548 PSU7A Status Indication020-543 Dual Transmission Path / Booster, PSU Interface020-773 Routing Termination Unit (DEOL)020-877 Extinguishing Interface Module M221-SI020-643 ID²net Fibre Optic Interface Kit020-647 ID²net Network Gateway Module, (NGM) for use in Mach 2.8 PanelLPCB Ref.No.154g/01Mach 2.8Notes:1. Products are available in language variant as follows:Group 0: English with English manuals2. Fixed build products incorporate a corresponding Basic Equipment Kit.Fixed build 2 loop analogue addressablecontrol and indicating equipment002-530 2 Loop, PSU3A, Group 0Incorporating the following as modular units:Enclosures:020-472-009 Backbox Kit Standard020-473-009 Backbox Kit Extended, Black / Grey020-474-009 Backbox Kit Extended Deep, Black / Grey020-475-009 Backbox Kit Double Extended, Black / Grey020-476-009 Backbox Kit Double Extended Deep, Black / Grey154g/0118 Jan 2014 35

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products020-480-501 Cover Kit Main Moulded, Black / Grey020-481-009 Cover Kit Extended Moulded, Black / Grey020-508-009 Backbox Extension Standard Assembly Black / Grey020-509-009 Backbox Extension Deep Assembly Black / Grey020-576 Main Cover, Stainless Steel020-577 Extension Cover Stainless Steel020-621 Zone Extension Cover, Stainless / Steel020-621-009 256 Zone Extension Cover, Black / Grey020-541-501 PSU7A / 78Ah Battery EnclosureModules:020-559-001 Zone Extension Chassis Kit 1-64 Zone C/W Display Module020-559-002 Zone Extension Chassis Kit 65-128 Zone C/W Display Module020-612 Double Extended Chassis Kit 256 Zone020-708-009 Extension Chassis with Printer020-644-009 Printer Assembly020-588 Notifier Dual Loop Interface Board, (LIB)020-549 Notifier Dual Enhanced Loop Interface Board, (ELIB)020-478 RS232 Interface020-479 RS485 Interface020-648 PSU3A020-579 PSU7A, (Requires Dual Transmission Path / Booster, PSU Interface)020-548 PSU7A Status Indication020-543 Dual Transmission Path / Booster, PSU Interface020-773 Routing Termination Unit (DEOL)020-877 Extinguishing Interface Module M221-SI020-643 ID²net Fibre Optic Interface Kit020-647 ID²net Network Gateway Module, (NGM) for use in Mach 2.8 PanelLPCB Ref.No.Mach 2.8Notes:1. Products are available in language variant as follows:Group 0: English with English manuals2. Fixed build products incorporate a corresponding Basic Equipment Kit.Fixed build 4 loop analogue addressablecontrol and indicating equipment020-905 4 Loop, PSU7A, Group 0Incorporating the following as modular units:Enclosures:020-472-009 Backbox Kit Standard020-473-009 Backbox Kit Extended, Black / Grey020-474-009 Backbox Kit Extended Deep, Black / Grey020-475-009 Backbox Kit Double Extended, Black / Grey020-476-009 Backbox Kit Double Extended Deep, Black / Grey020-480-501 Cover Kit Main Moulded, Black / Grey020-481-009 Cover Kit Extended Moulded, Black / Grey020-508-009 Backbox Extension Standard Assembly Black / Grey020-509-009 Backbox Extension Deep Assembly Black / Grey020-576 Main Cover, Stainless Steel020-577 Extension Cover Stainless Steel020-621 Zone Extension Cover, Stainless / Steel020-621-009 256 Zone Extension Cover, Black / Grey020-541-501 PSU7A / 78Ah Battery EnclosureModules:020-559-001 Zone Extension Chassis Kit 1-64 Zone C/W Display Module020-559-002 Zone Extension Chassis Kit 65-128 Zone C/W Display Module020-612 Double Extended Chassis Kit 256 Zone020-708-009 Extension Chassis with Printer020-644-009 Printer Assembly020-588 Notifier Dual Loop Interface Board, (LIB)020-549 Notifier Dual Enhanced Loop Interface Board, (ELIB)020-478 RS232 Interface020-479 RS485 Interface020-648 PSU3A020-579 PSU7A, (Requires Dual Transmission Path / Booster, PSU Interface)020-548 PSU7A Status Indication020-543 Dual Transmission Path / Booster, PSU Interface020-773 Routing Termination Unit (DEOL)154g/0136 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products020-877 Extinguishing Interface Module M221-SI020-643 ID²net Fibre Optic Interface Kit020-647 ID²net Network Gateway Module, (NGM) for use in Mach 2.8 PanelLPCB Ref.No.Mach 2.8Mach 2.8Notes:1. Products are available in language variant as follows:Group 0: English with English manuals2. Fixed build products incorporate a corresponding Basic Equipment Kit.Fixed build 6 loop analogue addressablecontrol and indicating equipment020-906 6 Loop, PSU7A, Group 0Incorporating the following as modular units:Enclosures:020-472-009 Backbox Kit Standard020-473-009 Backbox Kit Extended, Black / Grey020-474-009 Backbox Kit Extended Deep, Black / Grey020-475-009 Backbox Kit Double Extended, Black / Grey020-476-009 Backbox Kit Double Extended Deep, Black / Grey020-480-501 Cover Kit Main Moulded, Black / Grey020-481-009 Cover Kit Extended Moulded, Black / Grey020-508-009 Backbox Extension Standard Assembly Black / Grey020-509-009 Backbox Extension Deep Assembly Black / Grey020-576 Main Cover, Stainless Steel020-577 Extension Cover Stainless Steel020-621 Zone Extension Cover, Stainless / Steel020-621-009 256 Zone Extension Cover, Black / Grey020-541-501 PSU7A / 78Ah Battery EnclosureModules:020-559-001 Zone Extension Chassis Kit 1-64 Zone C/W Display Module020-559-002 Zone Extension Chassis Kit 65-128 Zone C/W Display Module020-612 Double Extended Chassis Kit 256 Zone020-708-009 Extension Chassis with Printer020-644-009 Printer Assembly020-588 Notifier Dual Loop Interface Board, (LIB)020-549 Notifier Dual Enhanced Loop Interface Board, (ELIB)020-478 RS232 Interface020-479 RS485 Interface020-648 PSU3A020-579 PSU7A, (Requires Dual Transmission Path / Booster, PSU Interface)020-548 PSU7A Status Indication020-543 Dual Transmission Path / Booster, PSU Interface020-773 Routing Termination Unit (DEOL)020-877 Extinguishing Interface Module M221-SI020-643 ID²net Fibre Optic Interface Kit020-647 ID²net Network Gateway Module, (NGM) for use in Mach 2.8 PanelNotes:1. Products are available in language variant as follows:Group 0: English with English manuals2. Fixed build products incorporate a corresponding Basic Equipment Kit.Fixed build 8 loop analogue addressablecontrol and indicating equipment020-907 8 Loop, PSU7A, Group, 78Ah Battery EnclosureIncorporating the following as modular units:Enclosures:020-472-009 Backbox Kit Standard020-473-009 Backbox Kit Extended, Black / Grey020-474-009 Backbox Kit Extended Deep, Black / Grey020-475-009 Backbox Kit Double Extended, Black / Grey020-476-009 Backbox Kit Double Extended Deep, Black / Grey020-480-501 Cover Kit Main Moulded, Black / Grey020-481-009 Cover Kit Extended Moulded, Black / Grey020-508-009 Backbox Extension Standard Assembly Black / Grey020-509-009 Backbox Extension Deep Assembly Black / Grey154g/01154g/0118 Jan 2014 37

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products020-576 Main Cover, Stainless Steel020-577 Extension Cover Stainless Steel020-621 Zone Extension Cover, Stainless / Steel020-621-009 256 Zone Extension Cover, Black / Grey020-541-501 PSU7A / 78Ah Battery EnclosureModules:020-559-001 Zone Extension Chassis Kit 1-64 Zone C/W Display Module020-559-002 Zone Extension Chassis Kit 65-128 Zone C/W Display Module020-612 Double Extended Chassis Kit 256 Zone020-708-009 Extension Chassis with Printer020-644-009 Printer Assembly020-588 Notifier Dual Loop Interface Board, (LIB)020-549 Notifier Dual Enhanced Loop Interface Board, (ELIB)020-478 RS232 Interface020-479 RS485 Interface020-648 PSU3A020-579 PSU7A, (Requires Dual Transmission Path / Booster, PSU Interface)020-548 PSU7A Status Indication020-543 Dual Transmission Path / Booster, PSU Interface020-773 Routing Termination Unit (DEOL)020-877 Extinguishing Interface Module M221-SI020-643 ID²net Fibre Optic Interface Kit020-647 ID²net Network Gateway Module, (NGM) for use in Mach 2.8 PanelLPCB Ref.No.Notes:1. Products are available in language variant as follows:Group 0: English with English manuals2. Fixed build products incorporate a corresponding Basic Equipment Kit.Carillion (Novar Systems Ltd)Hamilton Industrial Park, 140 Waterside Road, Leicester LE5 1TN, United KingdomTel: 0116 246 2000 • Fax: 0116 246 2300Website: www.gent.co.ukCertificate No: 042bc to EN 54-2: 1997+A1:2006 and EN 54-4: 1997 + A1:2002 + A2:2006Certificated ProductsCP2-AMCCP4-AMCTwo loop analogue addressable control and indicating equipment(English language)Incorporating as modular units:2434-859 Master Controller Board (MCB)2434-862 Power Supply Unit2434-762 Display and Key card (DKC)2434-669 Loop processor card4374-161 Text Membrane (English)2434-861 Copper network cardScope of approval does not include the operation of the network card)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionOne to Four loop analogue addressable control and indicating equipment (Englishlanguage)Incorporating as modular units:LPCB Ref.No.042bc/04042bc/0738 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsCP4-72-AMC2434-863 Master controller card (M.C.C)2434-710 Loop card2434-831 Power supply PCB2434-854 Backplane PCB2434-861 Display and Key card (D.K.C)2434-864 Terminal card2434-565 Printer Module4374-157 Text Membrane (English)2434-674 Copper network cardNote: Scope of approval does not include the operation of the network card)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionOne to Six loop analogue addressable control and indicating equipment (EnglishLanguage)Incorporating as modular units:2434-863 Master controller card (M.C.C)2434-710 Loop card2434-992 Thermistor board2434-860 Battery terminal board2434-832 Power supply PCB2434-854 Backplane PCB2434-761 Display and Key card (D.K.C)2434-864 Terminal card2434-565 Printer module4374-157 Text Membrane (English)2434-674 Copper network card( Note: Scope of approval does not include the operation of the network card)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionLPCB Ref.No.042bc/11Channel Safety Systems Ltd9 Petersfield Business Park, Petersfield GU32 3QA, United KingdomTel: 08458847000 • Fax: 08458846000E-mail: sales@channelsafety.co.uk • Website: www.chanelsafety.co.ukCertificate No: 176b to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsCFP702-4/CHANTwo zone conventional control and indicating equipmentIncorporating the units:RPF0702005 Power supply PCBSPF0724851 2 Zone main control boardCertified with the following options with requirements from EN 54-2: 1997LPCB Ref.No.176b/077.8 Output to fire alarm devices(s)7.11 Delays to outputs10 Test conditionCFP704-4/CHAN Four zone conventional control and indicating equipment 176b/0818 Jan 2014 39

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsLPCB Ref.No.CFP708-4/CHANIncorporating the units:RPF0702005 Power supply PCBSPF0724853 4 Zone main control boardCertified with the following options with requirements from EN 54-2: 19977.8 Output to fire alarm devices(s)7.11 Delays to outputs10 Test conditionEight zone conventional control and indicating equipmentIncorporating the units:RPF0702005 Power supply PCBSPF0724855 8 Zone main control boardCertified with the following options with requirements from EN 54-2: 19977.8 Output to fire alarm devices(s)7.11 Delays to outputs10 Test condition176b/09Computionics Limited (Trading as C-Tec)Challenge Way, Martland Park, Wigan, Lancashire WN5 OLD, United KingdomTel: +44 (0)1942 322744/42444 • Fax: +44 (0)1942 829867E-mail: sales@C-tec.co.uk • Website: www.c-tec.co.ukCertificate No: 176b to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsXFP502/HXFP502/X2 loop, 32 zone analogue addressable control and indicating equipment using HochikiProtocol, metal housingIncorporating the following units:SPF0501000 Switch mode power supply boardSPF0501202 XFP Hochiki 2 loop, main motherboardSPF0501200 Display board "keypad display"Certified with the following options with requirements from EN 54-2: 19977.8 Output to fire alarm device(s)7.11 Delays to the actioning of outputs fire alarm devices and fire routingequipment7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNotes:1. Scope of approval does not include the operation of the network functionality .2 Loop, 32 zone analogue addressable control and indicating equipment using ApolloProtocol, metal housingIncorporating the following units:SPF0501000 Switch mode power supply boardSPF0501201 XFP Apollo 2 loop, main motherboardSPF0501200 Display board "Keypad display"Certified with the following options with requirements from EN54-2: 19977.8 Output to fire alarm device(s)7.11 Delays to the actioning of outputs fire alarm devices and fire routingequipment7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type BLPCB Ref.No.176b/01176b/0240 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsXFP501/HXFP501/XXFP501E/HXFP501E/X7.12.3 Dependencies on more than one alarm signal - Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNotes:1. Scope of approval does not include the operation of the network functionality.1 Loop, 32 zone analogue addressable control and indicating equipment using HochikiProtocol, metal housingIncorporating the following units:SPF0501000 Switch mode power supply boardSPF0501212 XFP Hochiki 1 loop, main motherboardSPF0501200 Display board "Keypad display"Certified with the following options with requirements from EN54-2: 19977.8 Output to fire alarm device(s)7.11 Delays to the actioning of outputs fire alarm devices and fire routingequipment7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNotes:1. Scope of approval does not include the operation of the network functionality.1 Loop, 32 zone analogue addressable control and indicating equipment using ApolloProtocol, metal housingIncorporating the following units:SPF0501000 Switch mode power supply boardSPF0501211 XFP Apollo 1 loop, main motherboardSPF0501200 Display board "keypad display"Certified with the following options with requirements from EN54-2: 19977.8 Output to fire alarm device(s)7.11 Delays to the actioning of outputs fire alarm devices and fire routingequipment7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNotes:1. Scope of approval does not include the operation of the network functionality.1 Loop, 16 zone analogue addressable control and indicating equipment using Hochikiprotocol, plastic housingIncorporating the following units:SPF0702480 Switch mode power supply boardSPF0501102 XFP Hochiki 1 loop, main motherboardCertified with the following options with requirements from EN54-2: 19977.8 Output to fire alarm device(s)7.11 Delays to the actioning of outputs fire alarm devices and fire routingequipment7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNotes:1. Scope of approval does not include the operation of the network functionality1 Loop, 16 zone analogue addressable control and indicating equipment using ApolloProtocol, plastic housingIncorporating the following units:SPF0702480 Switch mode power supply boardSPF0501101 XFP Apollo 1 loop, main motherboardLPCB Ref.No.176b/03176b/04176b/05176b/0618 Jan 2014 41

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsCFP702-4CFP704-4CFP708-4CFP702-4/ACNLCFP704-4/ACNLCertified with the following options with requirements from EN54-2: 19977.8 Output to fire alarm device(s)7.11 Delays to the actioning of outputs fire alarm devices and fire routingequipment7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNotes:1. Scope of approval does not include the operation of the network functionalityTwo zone conventional control and indicating equipmentIncorporating the units:SPF0702480 Switch mode power supply unit boardSPF0724851 2 Zone main control boardCertified with the following options with requirements from EN 54-2: 19977.8 Output to fire alarm devices(s)7.11 Delays to outputs10 Test conditionFour zone conventional control and indicating equipmentIncorporating the units:SPF0702480 Switch mode power supply unit boardSPF0724853 4 Zone main control boardCertified with the following options with requirements from EN 54-2: 19977.8 Output to fire alarm devices(s)7.11 Delays to outputs10 Test conditionEight zone conventional control and indicating equipmentIncorporating the units:SPF0702480 Switch mode power supply unit boardSPF0724855 8 Zone main control boardCertified with the following options with requirements from EN 54-2: 19977.8 Output to fire alarm devices(s)7.11 Delays to outputs10 Test conditionTwo zone conventional control and indicating equipmentIncorporating the following units:SPF0702480 Switch mode power supply unit boardSPF0724837 2 Zone main control boardCertified with the following options with requirements from EN 54-2: 19977.8 Output to fire alarm devices(s)7.11 Delays to outputs7.13 Alarm counter10 Test conditionFour zone conventional control and indicating equipmentIncorporating the following units:SPF0702480 Switch mode power supply unit boardSPF0724839 4 Zone main control boardLPCB Ref.No.176b/07176b/08176b/09176b/10176b/11Certified with the following options with requirements from EN 54-2: 19977.8 Output to fire alarm devices(s)7.11 Delays to outputs7.13 Alarm counter10 Test conditionCFP708-4/ACNL Eight zone conventional control and indicating equipment 176b/1242 18 Jan 2014

Certificated ProductsIncorporating the following units:PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTLPCB Ref.No.SPF0702480 Switch mode power supply unit boardSPF0724841 8 Zone main control boardCertified with the following options with requirements from EN 54-2: 19977.8 Output to fire alarm devices(s)7.11 Delays to outputs7.13 Alarm counter10 Test conditionCertificate No: 176c to EN 12094-1: 2003 and EN 54-2: 1997 + A1: 2006 + A2: 2007, EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsEP203EP203/CONConventional three zone class A extinguisher control panelIncorporating the following units:SPF0000203 Main extinguisher controlSPF0000212 External relay interfaceSPF0003613 Power supply unitSPF0000214 EP214 terminatorIncorporating as modular units:EP210S Remote Status Unit Surface Mount optional (See Note 1)EP211 Economy Status Unit optional (See Note 1)Certified with the following options with requirements from EN 12094-1:20034.17 Delay of extinguishing signal4.18 Signal representing the flow of extinguishing agent4.19 Monitoring of the status of components4.20 Emergency hold device4.21 Control of flooding time4.23 Manual only mode4.26 Triggering of equipment outside the system4.27 Emergency abort device4.30 Activation of alarm devices with different signalsCertified with the following options with requirements from EN-54-2:19977.8 Output to fire alarm device(s)7.11 Delays to the actioning of outputs fire alarm devices and fire routingequipment7.13 Alarm counter10 Test conditionNotes:1. Optional Remote Status Unit part No. EP210S & Economy Status Unit part No.EP211 are not certified as meeting the requirements of the standards specified.2. Meets the requirements of EN12094-3:2003, Class A - i.e. operational temperaturerange of -5°C to +40°C.Conventional three zone class A extinguisher control panel under Context Plus BrandIncorporating the following units:SPF0000203 Main extinguisher controlSPF0000212 External relay interfaceSPF0003613 Power supply unitSPF0000214 EP214 terminatorIncorporating as modular units:EP210S Remote Status Unit Surface Mount optional (See Note 1)EP211 Economy Status Unit optional (See Note 1)Certified with the following options with requirements from EN 12094-1:20034.17 Delay of extinguishing signalLPCB Ref.No.176c/01176c/0118 Jan 2014 43

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsEP203/DE4.18 Signal representing the flow of extinguishing agent4.19 Monitoring of the status of components4.20 Emergency hold device4.21 Control of flooding time4.23 Manual only mode4.26 Triggering of equipment outside the system4.27 Emergency abort device4.30 Activation of alarm devices with different signalsCertified with the following options with requirements from EN-54-2:19977.8 Output to fire alarm device(s)7.11 Delays to the actioning of outputs fire alarm devices and fire routingequipment7.13 Alarm counter10 Test conditionNotes:1. Optional Remote Status Unit part No. EP210S & Economy Status Unit part No.EP211 are not certified as meeting the requirements of the standards specified.2. Meets the requirements of EN12094-3:2003, Class A - i.e. operational temperaturerange of -5°C to +40°C.Conventional three zone class A extinguisher control panel German Language VariantIncorporating the following units:SPF0000203 Main extinguisher controlSPF0000212 External relay interfaceSPF0003613 Power supply unitSPF0000214 EP214 terminatorIncorporating as modular units:EP210S Remote Status Unit Surface Mount optional (See Note 1)EP211 Economy Status Unit optional (See Note 1)Certified with the following options with requirements from EN 12094-1:20034.17 Delay of extinguishing signal4.18 Signal representing the flow of extinguishing agent4.19 Monitoring of the status of components4.20 Emergency hold device4.21 Control of flooding time4.23 Manual only mode4.26 Triggering of equipment outside the system4.27 Emergency abort device4.30 Activation of alarm devices with different signalsCertified with the following options with requirements from EN-54-2:19977.8 Output to fire alarm device(s)7.11 Delays to the actioning of outputs fire alarm devices and fire routingequipment7.13 Alarm counter10 Test conditionNotes:1. Optional Remote Status Unit part No. EP210S & Economy Status Unit part No.EP211 are not certified as meeting the requirements of the standards specified.2. Meets the requirements of EN12094-3:2003, Class A - i.e. operational temperaturerange of -5°C to +40°C.LPCB Ref.No.176c/0144 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTContext Plus LtdExport House, 175 Mauldeth Road, Fallowfield, Manchester M14 6SG, United KingdomTel: +44 (0)161 257 2541 • Fax: +44 (0)161 225 8817E-mail: xportsales@xportsales.com • Website: www.xportsales.comCertificate No: 176b-(cl-2) to EN 54-2: 1997 + A1: 2006Certificate No: 176c-(cl-2) to EN 54-2: 1997 + A1: 2006Control and indicating equipmentCertificated ProductsXFP502/X/CONTwo Loop, 32 Zone Analogue addressable control and indicating equipment using ApolloProtocol, Metal housingLPCB Ref.No.176b/02XFP501/X/CONXFP501E/X/CONIncorporating the following units:SPF0501000 Switch mode power supply boardSPF0501201 XFP Apollo 2 Loop, Main motherboardSPF0501200 Display board Keypad DisplayCertified with the following options with requirements from EN 54-2:19977.8 Output to fire alarm device(s)7.11 Delays to the actioning of outputs fire alarm devices and fire routingequipment7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNote :1. Scope of approval does not include the operation of the network functionality.One Loop, 32 Zone Analogue addressable control and indicating equipment using ApolloProtocol, Metal housingIncorporating the following units:SPF0501000 Switch mode power supply boardSPF0501211 XFP Apollo 1 Loop, Main motherboardSPF0501200 Display board Keypad DisplayCertified with the following options with requirements from EN 54-2:19977.8 Output to fire alarm device(s)7.11 Delays to the actioning of outputs fire alarm devices and fire routingequipment7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNote:1. Scope of approval does not include the operation of the network functionality.One Loop, 16 Zone Analogue addressable control and indicatingequipment using Apollo protocol, Plastic housingIncorporating the following units:SPF0702480 Switch mode power supply boardSPF0501101 XFP Apollo 1 Loop, Main motherboardCertified with the following options with requirements from EN 54-2:19977.8 Output to fire alarm device(s)7.11 Delays to the actioning of outputs fire alarm devices and fire routing176b/04176b/0618 Jan 2014 45

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsCFP702-4/CONCFP704-4/CONCFP708-4/CONEP203/CONequipment7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNote:1. Scope of approval does not include the operation of the network functionality.Two zone conventional control and indicating equipmentIncorporating the units:SPF0702480 Switch mode power supply unit boardSPF0724851 2 Zone main control boardCertified with the following options with requirements from EN 54-2: 19977.8 Output to fire alarm devices(s)7.11 Delays to outputs10 Test conditionFour zone conventional control and indicating equipmentIncorporating the units:SPF0702480 Switch mode power supply unit boardSPF0724853 4 Zone main control boardCertified with the following options with requirements from EN 54-2: 19977.8 Output to fire alarm devices(s)7.11 Delays to outputs10 Test conditionEight zone conventional control and indicating equipmentIncorporating the units:SPF0702480 Switch mode power supply unit boardSPF0724855 8 Zone main control boardCertified with the following options with requirements from EN 54-2: 19977.8 Output to fire alarm devices(s)7.11 Delays to outputs10 Test conditionConventional three zone class A extinguisher control panel underContext Plus BrandIncorporating the following units:SPF0000203 Main extinguisher controlSPF0000212 External relay interfaceSPF0003613 Power supply unitSPF0000214 EP214 terminatorIncorporating as modular units:EP210S Remote Status Unit Surface Mount optional (See Note 1)EP211 Economy Status Unit optional (See Note 1)Certified with the following options with requirements from EN 12094-1:20034.17 Delay of extinguishing signal4.18 Signal representing the flow of extinguishing agent4.19 Monitoring of the status of components4.20 Emergency hold device4.21 Control of flooding time4.23 Manual only mode4.26 Triggering of equipment outside the system4.27 Emergency abort device4.30 Activation of alarm devices with different signalsCertified with the following options with requirements from EN 54-2:19977.8 Output to fire alarm device(s)LPCB Ref.No.176b/07176b/08176b/09176c/0146 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products7.11 Delays to the auctioning of outputs fire alarm devicesand fire routing equipment7.13 Alarm counter10 Test conditionNote:1. Optional Remote Status Unit part No. EP210S & Economy Status Unit part No. EP211are not certified meeting the requirements of the standards specified2. Meets the requirements of EN12094-3:2003, Class A - i.e. operational temperaturerange of -5°C to +40°C.LPCB Ref.No.Control Equipment LimitedHillcrest Business Park, Dudley, West Midlands DY2 9AP, United KingdomTel: +44 (0)1384 458651 • Fax: +44 (0)1384 458972E-mail: celsales@controlequipment.co.uk • Website: www.controlequipment.comCertificate No: 018c to EN 54: Part 2 and 4: 1997Certificate No: 018q-(cl-1) to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006Certificate No: 018s-(cl-1) to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006Control and indicating equipmentCertificated ProductsDiscoveryPrecept En2 (2605-100)Precept En4 (2605-101)Precept En8 (2605-102)4 loop analogue addressable control and indicating equipmentIncorporating:A1579 MotherboardA1580 Display boardA1585 Loop cardsA1584 230 Vac power supply control cardA1599 Printer boardCertified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of addressable points10 Test condition2 zone conventional control and indicating equipmentIncorporating as modular units:-C1627 Mother boardC1628 Display boardC1631 Repeater interface board (option)Certified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition4 zone conventional control and indicating equipmentIncorporating as modular units:-C1627 Mother boardC1628 Display boardC1631 Repeater interface board (option)Certified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition8 zone conventional control and indicating equipmentIncorporating as modular units:-C1627 Mother boardC1628 Display boardC1631 Repeater interface board (option)LPCB Ref.No..018c/01018c/02018c/03018c/0418 Jan 2014 47

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsPrecept En16 (2605-103)Precept En32 (2605-104)Precept En8 (2605-110)Precept En16 Repeater(2605-111)Precept En32 Repeater(2605-112)Certified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition16 zone conventional control and indicating equipmentIncorporating as modular units:-C1627 Mother boardC1628 Display boardC1631 Repeater interface board (option)Certified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition32 zone conventional control and indicating equipmentIncorporating as modular units:-C1627 Mother boardC1629 Display boardC1631 Repeater interface board (option)C1632 16 Zone Expansion boardC1652 5A Power supply boardCertified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition8 zone conventional repeater unitIncorporating as modular units:-C1627 Mother boardC1628 Display boardC1631 Repeater interface board (option)Certified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of addressable points10 Test condition16 zone conventional repeater unitIncorporating as modular units:-C1627 Mother boardC1628 Display boardC1631 Repeater interface board (option)Certified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of addressable points10 Test condition32 zone conventional repeater unitIncorporating as modular units:-C1627 Mother boardC1628 Display boardC1631 Repeater interface board (option)Certified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of addressable points10 Test condition508.031.701 FIRE CLASS Duo-CEL, 1 zone conventional control and indicating equipmentLPCB Ref.No.018c/05018c/06018c/R01018c/R02018c/R03018q/01Incorporating as modular units:C1694 - 2605501, 1 Zone MotherboardBAQ-35T24 Power Supply48 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.12.1 Dependencies on more than one alarm signal - Type A7.13 Alarm counter10 Test condition508.031.702 FIRE CLASS Duo-CEL, 2 zone conventional control and indicating equipmentLPCB Ref.No.018q/02Incorporating as modular units:C1694 - 2605502, 2 Zone MotherboardBAQ-35T24 Power SupplyCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.12.1 Dependencies on more than one alarm signal - Type A7.13 Alarm counter10 Test condition508.031.703 FIRE CLASS Duo-CEL, 4 zone conventional control and indicating equipment018q/03Incorporating as modular units:C1694 - 2605503 4 Zone MotherboardBAQ-35T24 Power SupplyCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.12.1 Dependencies on more than one alarm signal - Type A7.13 Alarm counter10 Test condition508.031.704 FIRE CLASS Duo-CEL, 8 zone conventional control and indicating equipment018q/04Incorporating as modular units:C1694 - 2605504, 8 Zone MotherboardBAQ-35T24 Power SupplyCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.12.1 Dependencies on more than one alarm signal - Type A7.13 Alarm counter10 Test condition508.031.705 FIRE CLASS Duo-CEL, Fire alarm repeater (mains).Incorporating as modular units:C1694 2605505, Repeater MotherboardBAQ-35T24 Power SupplyNote: Compatible with 2605543 & 2605544 panels only.508.031.706 FIRE CLASS Duo-CEL, Fire alarm repeater (24 VDC).018q/R01018q/R02FC32-1Incorporating as a modular unit:C1694 2605506, Repeater MotherboardNote: Compatible with 2605543 & 2605544 panels only.FIRECLASS 557.200.701 analogue addressable control and indicating equipment1 loop, 32 ZoneIncorporating as modular units:DCM832R Operator Control / Display ModuleCPU800 Main CPU moduleFIM801 Field Interface ModulePMM800 Power Supply MonitorBAQ60T24 Power SupplyCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment018s/0118 Jan 2014 49

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal (Type A dependency)7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.12.3 Dependencies on more than one alarm signal (Type C dependency)7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition11 Standardized input/output interfaceNote:1) This product approval does not constitute compliance withthe fire detection and alarm systems requirements of EN 54-13.LPCB Ref.No.FC64-2 FIRECLASS (557.200.702) analogue addressable control and indicating equipment 2loop, 64 ZoneIncorporating as modular units:DCM864R Operator Control / Display ModuleCPU800 Main CPU moduleFIM802Field Interface ModulePMM800Power Supply MonitorBAQ140T24 Power Supply018s/02FC64-4and as optional modular units:IOB800Input/Output Expansion BoardCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal (Type A dependency)7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.12.3 Dependencies on more than one alarm signal (Type C dependency)7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition11 Standardized input/output interfaceNote:1. This product approval does not constitute compliance with the fire detection and alarmsystemsrequirements of EN 54-13.FIRECLASS (557.200.703) analogue addressable control and indicating equipment4 loop, 64 ZoneIncorporating as modular units:DCM864R Operator Control / Display ModuleCPU800 Main CPU moduleFIM802Field Interface ModulePMM800Power Supply MonitorBAQ140T24 Power SupplyPMM840Power Supply MonitorXLM800Loop Expander Boardand as optional modular units:IOB800Input/Output Expansion BoardCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal (Type A dependency)7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.12.3 Dependencies on more than one alarm signal (Type C dependency)018s/0350 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsFC240-2FC240-47.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition11 Standardized input/output interfaceNote:This product approval does not constitute compliance with the fire detection and alarmsystemsrequirements of EN 54-13.FIRECLASS (557.200.704) analogue addressable control and indicating equipment2 loop, 240 ZoneIncorporating as modular units:DCM832Operator Control / Display ModuleCPU800 Main CPU moduleFIM802Field Interface ModulePMM800Power Supply MonitorBAQ140T24 Power Supplyand as optional modular units:IOB800Input/Output Expansion BoardCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal (Type A dependency)7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.12.3 Dependencies on more than one alarm signal (Type C dependency)7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition11 Standardized input/output interfaceNote:1) This product approval does not constitutecompliance withthe fire detection and alarm systems requirementsof EN 54-13.FIRECLASS (557.200.705) analogue addressable control and indicating equipment4 loop, 240 ZoneIncorporating as modular units:DCM832 Operator Control / Display ModuleCPU800 Main CPU moduleFIM802Field Interface ModulePMM800Power Supply MonitorBAQ140T24 Power SupplyPMM840Power Supply MonitorXLM800Loop Expander Boardand as optional modular units:IOB800Input/Output Expansion BoardCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal (Type A dependency)7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.12.3 Dependencies on more than one alarm signal (Type C dependency)7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable pointsLPCB Ref.No.018s/04018s/0518 Jan 2014 51

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products10 Test condition11 Standardized input/output interfaceNote:This product approval does not constitute compliance with the fire detection and alarmsystemsrequirements of EN 54-13.557.200.706 FIRE CLASS 32 RA, 32 Zone Repeater Panel, is approved for use with the 557.200.701Fire Class 32-1 control and indicating equipment.Incorporating as modular units:DCM832R Operator Control / Display ModulePMM800 Power Supply MonitorBAQ60T24 Power Supply557.200.707 FIRE CLASS 64 RA, 64 Zone Repeater Panel, is approved for use with the 557.200.702Fire Class 64-2 and 557.200.703 Fire Class 64-4control and indicating equipment.Incorporating as modular units:DCM864R Operator Control / Display ModulePMM800 Power Supply MonitorBAQ60T24 Power Supply557.200.708 FIRE CLASS 240 RA, 240 Zone Repeater Panel, is approvedfor use with the 557.200.704 Fire Class 240-2and 557.200.705 Fire Class 240-4 control and indicating equipment.Incorporating as modular units:LPCB Ref.No.018s/R01018s/R02018s/R03DCM832 Operator Control / Display ModulePMM800 Power Supply MonitorBAQ60T24 Power SupplyCertificate No: 018t-(cl-1) to EN 54-4: 1997 + A1: 2002 + A2: 2006Certificate No: 018n to EN 54-4: 1997 + A1: 2002 + A2: 2006Power Supply UnitCertificated ProductsLPCB Ref.No.PSU A17 Addressable 17Ah Power Supply Unit 018n/02Notes:1. The unit is not intended to supply power to Fire Alarm Control Panels2. The maximum lead length for the fault output connection is 3mPSU A38 Addressable 38Ah Power Supply Unit 018n/03Notes:1. The unit is not intended to supply power to Fire Alarm Control Panels2. The maximum lead length for the fault output connection is 3m557.200.732 PSU A17 Addressable 17Ah Power Supply Unit 018t/01Notes:1. The unit is not intended to supply power to Fire Alarm Control Panels2. The maximum lead length for the fault output connection is 3m557.200.733 PSU A38 Addressable 38Ah Power Supply Unit 018t/02Notes:1. The unit is not intended to supply power to Fire Alarm Control Panels2. The maximum lead length for the fault output connection is 3m557.200.731 FIRE CLASS 1.9A Power Supply Unit 018t/03Notes:1. The unit is not intended to supply power to Fire Alarm Control PanelsCertificate No: 018a to BS 5839: Part 4. This certificate is to a withdrawn standard. Control and indicating equipment conformingto this standard is not suitable for use within the jurisdiction of the European Union (EU). This certificate, to the withdrawnstandard, is maintained because control and indicating equipment meeting the withdrawn standard is still requested by someregulators outside of the EU.Control and indicating equipmentCertificated ProductsPrecept2 zone control and indicating equipmentIncorporating as modular unitsC1423 MotherboardLPCB Ref.No.018a/0152 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsPreceptPreceptPreceptPreceptSeries 600Series 600Series 600C1440 Display BoardCertified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of addressable points10 Test condition4 zone control and indicating equipmentIncorporating as modular unitsC1423 MotherboardC1441 Display BoardCertified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of addressable points10 Test condition8 zone control and indicating equipmentIncorporating as modular unitsC1427 MotherboardC1462 Display BoardCertified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of addressable points10 Test condition16 zone control and indicating equipmentIncorporating as modular unitsC1425 MotherboardC1426 Display BoardCertified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of addressable points10 Test condition32 zone control and indicating equipmentIncorporating as modular unitsC1425 MotherboardC1426 Display BoardC1464 Display BoardCertified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of addressable points10 Test condition2 zone control and indicating equipmentIncorporating as modular unitsC1423 MotherboardC1440 Display BoardCertified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of addressable points10 Test condition4 zone control and indicating equipmentIncorporating as modular unitsC1423 MotherboardC1441 Display BoardCertified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of addressable points10 Test condition8 zone control and indicating equipmentIncorporating as modular unitsC1427 MotherboardC1462 Display BoardLPCB Ref.No.018a/02018a/03018a/04018a/05018a/06018a/07018a/0818 Jan 2014 53

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsSeries 600Series 600Certified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of addressable points10 Test condition16 zone control and indicating equipmentIncorporating as modular unitsC1425 MotherboardC1426 Display BoardCertified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of addressable points10 Test condition32 zone control and indicating equipmentIncorporating as modular unitsC1425 MotherboardC1426 Display BoardC1464 Display BoardCertified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of addressable points10 Test conditionLPCB Ref.No.018a/09018a/10Cooper Industries IncWheatley Hall Road, Doncaster, South Yorkshire DN2 4NB, United KingdomTel: +44 (0)1302 303303 • Fax: +44 (0)1302 367155E-mail: sales@cooper-ls.com • Website: www.cooper-ls.comUK Sales:Menvier & JSBTel: +44 (0)1302 303202 • Fax: +44 (0)1302 367155E-mail: enquiries@cooper-ls.com • Website: www.cooper-ls.comUK Sales:Tel: +44 (0)1594 541900 • Fax: +44 (0)1594 541910E-mail: sales@cooperfire.co.uk • Website: www.cooperfire.co.ukCertificate No: 714a to EN 54 Part 2 and 4 :1997Certificated ProductsCF3000Analogue addressable 2 and 4 loop Control and indicating equipmentIncorporating the following units:ADF6 Assembled back boxYPCB2153 Motherboard PCBYPCB2147 PSU PCBYPCB2148 2 Loop card (2 off)ADF6 Screen Touch ScreenYPCB2185 Complete Display + Micro PCBADF6DISPCOVER Display PCB CoverADF6FACIA Front MouldingADF6PRINTDOOR Printer Door MouldingBAT-NP12-12 Batteries (2 off)ADF6HINGE Door HingesADF6OPFACIA Optional Anti Tamper CoverADF6PRINTER PrinterLPCB Ref.No.714a/0154 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsDF6000FX6000CF2000YPCB2187 Fire Brigade InterfaceCertified with the following options from EN 54 Part 2:7.8 Output to fire alarm device(s)7.9 Output to fire alarm routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to the actioning of outputs fire alarm devices and fire routingequipment7.12 Coincidence detection7.13 Alarm counter8.9 Output to fault warning routing equipment9.5 Disablement of each address point10 Test conditionAnalogue addressable 2 and 4 loop control and indicating equipmentIncorporating the following units:ADF6 Assembled back boxYPCB2153 Motherboard PCBYPCB2147 PSU PCBYPCB2148 2 Loop card (2 off)ADF6Screen Touch ScreenYPCB2185 Complete Display + Micro PCBADF6DISPCOVER Display PCB CoverADF6FACIA Front MouldingADF6PRINTDOOR Printer Door MouldingBAT-NP12-12 Batteries (2 off)ADF6HINGE Door HingesADF6OPFACIA Optional Anti Tamper CoverADF6PRINTER PrinterYPCB2187 Fire Brigade InterfaceCertified with the following options from EN 54 Part 2:7.8 Output to fire alarm device(s)7.9 Output to fire alarm routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to the actioning of outputs fire alarm devices and fire routingequipment7.12 Coincidence detection7.13 Alarm counter8.9 Output to fault warning routing equipment9.5 Disablement of each address point10 Test conditionAnalogue addressable 2 and 4 Loop control and indicating equipmentIncorporating the following units:ADF6 Back Assembled back boxYPCB2153 Motherboard PCBYPCB2147 PSU PCBYPCB2148 2 Loop Card (2 off)ADF6Screen Touch ScreenYPCB2185 Complete Display + Micro PCBADF6 DISPCOVER Display PCB CoverADF6FACIA Front MouldingADF6PRINTDOOR Printer Door MouldingBAT-NP12-12 Batteries (2 off)ADF6HINGE Door HingesADF6OPFACIA Optional Anti Tamper CoverADF6PRINTER PrinterYPCB2187 Fire Brigade InterfaceCertified with the following options from EN 54 Part 2:7.8 Output to fire alarm device(s)7.9 Output to fire alarm routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to the actioning of outputs fire alarm devices and fire routingequipment7.12 Coincidence detection7.13 Alarm counter8.9 Output to fault warning routing equipment9.5 Disablement of each address point10 Test conditionAnalogue addressable 2 Loop control and indicating equipmentIncorporating the following units:PR202-50-2209 Power supply boardPR202-50-2206 Main motherboardPR202-50-2205 Display boardCertified with the following options from EN 54 Part 2:LPCB Ref.No.714a/01714a/01714a/0218 Jan 2014 55

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products7.8 Output to fire alarm device(s)7.9 Output to fire alarm routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to the actioning of outputs fire alarm devices and fire routingequipment7.12 Coincidence detection7.13 Alarm counter8.9 Output to fault warning routing equipment9.5 Disablement of each address point10 Test conditionLPCB Ref.No.Cooper Lighting and Safety LtdWheatley Hall Road, Doncaster, South Yorkshire DN2 4NB, United KingdomTel: +44 (0)1302 303397 • Fax: +44 (0)1302 303251Website: www.cooper-Is.comCertificate No: 714h to EN54-2: 1997 + A1: 2006 and EN54-4: 1997 + A1: 2002 + A2: 2006Certificate No: 714p to EN 54-2:1197+ A1:2006 and EN 54-4:1997+A1:2002+A2:2006Certificated ProductsCF3000Intelligent analogue addressable 2 and 4 loop control and indicating equipmentIncorporating the following units:LPCB Ref.No.714h/01ADF6 BackYPCB2153YPCB2147YPCB2148ADF6ScreenYPCB2185ADF6 DISPCOVERADF6FACIAADF6PRINTDOORBAT-NP12-12ADF6HINGEADF6OPFACIAADF6PRINTERYPCB2187Assembled back boxMotherboard PCBPSU PCB2 Loop Card (2 off)Touch ScreenComplete Display + Micro PCBDisplay PCB CoverFront MouldingPrinter Door MouldingBatteries (2 off)Door HingesOptional Anti Tamper CoverPrinterFire Brigade InterfaceDF6000Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.10.1 Output to automatic fire protection equipment (Type A)7.10.2 Output to automatic fire protection equipment (Type B)7.11 Delays to outputs7.12.3 Dependencies on more than one alarm signal (Type C)7.13 Alarm counter8.9 Output to fault warning routing equipment9.5 Disablement of each address point10 Test conditionNotes:1. The scope of approval does not include the network functionality.2. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.Intelligent analogue addressable 2 and 4 loop control and indicating equipmentIncorporating the following units:714h/01ADF6 BackYPCB2153YPCB2147YPCB2148Assembled back boxMotherboard PCBPSU PCB2 Loop Card (2 off)56 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsADF6ScreenYPCB2185ADF6 DISPCOVERADF6FACIAADF6PRINTDOORBAT-NP12-12ADF6HINGEADF6OPFACIAADF6PRINTERYPCB2187Touch ScreenComplete Display + Micro PCBDisplay PCB CoverFront MouldingPrinter Door MouldingBatteries (2 off)Door HingesOptional Anti Tamper CoverPrinterFire Brigade InterfaceLPCB Ref.No.CF2000CF5008CF50016Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.10.1 Output to automatic fire protection equipment (Type A)7.10.2 Output to automatic fire protection equipment (Type B)7.11 Delays to outputs7.12.3 Dependencies on more than one alarm signal (Type C)7.13 Alarm counter8.9 Output to fault warning routing equipment9.5 Disablement of each address point10 Test conditionNotes:1. The scope of approval does not include the network functionality.2. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.Analogue addressable 2 loop control and indicating equipmentIncorporating the following units:PR202-50-2209 Power supply boardPR202-50-2206 Main motherboardPR202-50-2205 Display boardCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.10.1 Output to automatic fire protection equipment (Type A)7.11 Delays to outputs7.12.3 Dependencies on more than one alarm signal (Type C)7.13 Alarm counter8.9 Output to fault warning routing equipment9.5 Disablement of each address point10 Test conditionNotes:1. The scope of approval does not include the network functionality.2. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.Eight zone conventional control and indicating equipmentIncorporating the units:PA-04-0246 Main control board with integrated power supplyPA-04-0250 8 Zone display boardCertified with the following options with requirements from EN 54-2: 19977.8 Output to fire alarm devices(s)10 Test conditionSixteen zone conventional control and indicating equipmentIncorporating the units:PA-04-0247 Main control board with integrated power supplyPA-04-0251 16 Zone display boardCertified with the following options with requirements from EN 54-2: 19977.8 Output to fire alarm devices(s)714h/02714p/03714p/0418 Jan 2014 57

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products10 Test conditionLPCB Ref.No.Detector Electronics Corporation6901 West 110th Street, Minneapolis, Minesota 55438, USATel: +001 952 946 6488E-mail: detronics@detronics.com • Website: www.det-tronics.comCertificate No: 973c to EN 54-2: 1997 + A1: 2006Certificate No: 973d to EN 54-2: 1997 + A1: 2006 + EN12094-1: 2003Certificated ProductsEQ5400DSingle loop eight zone addressable control and indicating equipmentIQ3150 Controller Main controllerDetection panel Detection panelEQ2220 (GFM)Ground Fault MonitorLTM Lon termination moduleEQ3730 (EDIO) Enhanced Discrete Input/Output (SIL only)and as optional modular units:EQ3710 (AIM) Analogue Input ModuleEQ3720 (RM) Relay ModuleModel EQ22EM (IDCSC) Initiating Device Circuit - Short CircuitModel EQ25EM (SAM)Signal Audible ModuleModel EQ24EM (NE) Network ExtenderModel EQ24EM (PLR) Physical Layer RepeaterEQ3810 (PDM) Power Distribution Module750XCXH-24D Magnecraft relay moduleLPCB Ref.No.973c/01EQ5400RCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.13 Alarm counter8.3 Fault signals from points10 Test conditionSingle loop eight zone addressable control and indicating equipmentIncorporating as modular units:EQ3150 Controller Main controllerDetection panel Detection panelRouting panel Routing panelEQ2220 (GFM) Ground Fault MonitorLTM Lon termination moduleEQ3730 (EDIO) Enhanced Discrete Input/Output (SIL only)and as optional modular units:EQ3710 (AIM) Analogue Input ModuleEQ3720 (RM) Relay ModuleModel EQ22EM (IDCSC) Initiating Device Circuit - Short CircuitModel EQ25EM (SAM) Signal Audible ModuleModel EQ24EM (NE) Network ExtenderModel EQ24EM (PLR) Physical Layer RepeaterEQ3810 (PDM) Power Distribution Module750XCXH-24D Magnecraft relay module973c/02Certified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.12.2 Dependencies on more than one alarm signal (Type B dependency)58 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsEQ5400EEQ5400G7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment10 Test conditionSingle loop eight zone addressable control and indicating equipment and twoextinguishing zone class B electrical automatic control and delay devicesIncorporating as modular units:EQ3150 Controller Main controller (Redundant)Detection panel Detection panelRouting panel Routing panelExtinguishing panelExtinguishing panelEQ2220 (GFM) Ground Fault MonitorEQ3LTM Lon termination moduleEQ3730 (EDIO) Enhanced Discrete Input/Output (SIL only)and as optional modular units:EQ3710 (AIM) Analogue Input ModuleEQ3720 (RM) Relay ModuleModel EQ22EM (IDCSC) Initiating Device Circuit - Short CircuitModel EQ25EM (SAM) Signal Audible ModuleModel EQ24EM (NE) Network ExtenderModel EQ24EM (PLR) Physical Layer RepeaterEQ3810 (PDM) Power Distribution Module750XCXH-24D Magnecraft relay moduleCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.13 Alarm counter8.3 Fault signals from points8.4 Total loss of the power supply8.9 Output to fault warning routing equipment10 Test conditionCertified with the following options with requirements from EN 12094-1:4.17 Delay of extinguishing signal4.18 Signal representing the flow of extinguishing agent4.19 Monitoring of the status of components4.20 Emergency hold device4.21 Control of flooding time4.23 Manual only mode4.24 Triggering signals to equipment within the system4.26 Triggering of equipment outside the systemSingle loop eight zones Addressable control and indicating equipment and twoextinguishing zone class B electrical automatic control and delay devices.Incorporating as modular units:EQ3150 Controller Main controller (Redundant)Detection panel Detection panelExtinguishing panelExtinguishing panelEQ2220 (GFM)Ground Fault MonitorEQ3LTM Lon termination moduleEQ3730 (EDIO) Enhanced Discrete Input/Output (SIL only)and as optional modular units:EQ3710 (AIM) Analogue Input ModuleEQ3720 (RM) Relay ModuleModel EQ22EM (IDCSC) Initiating Device Circuit - Short CircuitModel EQ25EM (SAM) Signal Audible ModuleModel EQ24EM (NE) Network ExtenderModel EQ24EM (PLR) Physical Layer RepeaterLPCB Ref.No.973d/01973d/0218 Jan 2014 59

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsEQ3810 (PDM) Power Distribution Module750XCXH-24D Magnecraft relay moduleCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.13 Alarm counter8.3 Fault signals from points8.4 Total loss of the power supply10 Test conditionCertified with the following options with requirements from EN 12094-1:4.17 Delay of extinguishing signal4.18 Signal representing the flow of extinguishing agent4.19 Monitoring of the status of components4.20 Emergency hold device4.21 Control of flooding time4.23 Manual only mode4.24 Triggering signals to equipment within the system4.26 Triggering of equipment outside the systemLPCB Ref.No.Emirates Fire Protections Equip. Factory. TR. SectionBehind the Fourth Industrial Estate, Industrial Area 3, UAE PO 22436, Sharjah, United Arab EmiratesTel: 00971 653 40300 • Fax: 00971 653 40090E-mail: QC@firexuae.com • Website: www.firexuae.comCertificate No: 548p-(cl-5) to EN 54-2: 1997 + A1: 2006, EN 54-4: 1997 + A1: 2002 + A2: 2006Control and indicating equipmentCertificated ProductsFX200-2Intelligent 2 loop, 30 zone analogue addressable control and indicating equipmentLPCB Ref.No.548p/01FX-IFP8Incorporating the following units:MB-220/ F7.820.826 Main boardSB-220/ F7.820.827 Switch boardTB-220/ F7.820.828 Loop interface boardPS-220/ F7.820.829b Power supply unitZP-220/ F7.908.312d Zone indication and intervention boardLC200/F7.820.1125 Loop boardIncorporating as optional modular units:P-9930/ F7.820.170 RS-232 board for configurationP-9901A Printer module kitCertified with the following options with requirements from EN 54 part 2:7.8 Output to Fire Alarm Devices7.10.1 Output to automatic Fire Protection Equipment Type A7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of addressable pointsIntelligent 8 loop, 140 zone analogue addressable control and indicating equipmentIncorporating the following units:SB-800/ F7.820.1238 Indication boardLCIFP8/ F7.820.1239 Loop boardPB-800/ F7.820.1311 Power boardZP-800/ F7.820.1312 ZCP boardKB-800/ F7.820.1326 Keypad boardMB-800/ F7.820.1237 Main board548p/0260 18 Jan 2014

Certificated ProductsMO-800/ F7.820.1310 Mother boardPART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTLPCB Ref.No.FX102AFX104AFX108AFX116AIncorporating as optional modular units:P-9935/ F7.820.1313 USB communication boardOptional language variants:10104673 Portuguese language variant10104675 Hungarian language variantCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire routing equipment7.9.2 Alarm confirmation input from fire routing equipment7.10.1 Output type A7.10.2 Output type B7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test condition2 Zone conventional control and indicating equipmentIncorporating the following modules:FC-102A/ F7.843.399 MembraneCB-102A/ F2.908.1719 Control board with integrated PSEDB-102A/ F2.908.1722 Display boardCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire routing equipment7.11 Delays to outputs10 Test condition4 Zone conventional control and indicating equipmentIncorporating the following modules:FC-104A/ F7.843.400 MembraneCB-104A/ F2.908.1718 Control board with integrated PSEDB-104A/ F2.908.1721 Display boardOptional modules:10104649 Traditional Chinese text variantCF-104A/ F7.843.422 MembraneCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire routing equipment7.11 Delays to outputs10 Test condition8 Zone conventional control and indicating equipmentIncorporating the following modules:FC-108A/ F7.843.401 MembraneCB-108A/ F2.908.1675 Control board with integrated PSEDB-108A/ F2.908.1720 Display boardOptional modules:10104650 Traditional Chinese text variantCF-108A/ F7.843.423 MembraneCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire routing equipment7.11 Delays to outputs10 Test condition16 Zone conventional control and indicating equipmentIncorporating the following modules:FC-116A/ F7.843.402 MembraneXB-116A/ F2.908.1724 Control board with integrated PSE548p/03548p/04548p/05548p/0618 Jan 2014 61

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsDB-116A/ F2.908.1676 Display boardCB-116A/ F7.820.1677 Expansion boardOptional modules:10104651 Traditional Chinese text variantCF-116A/ F7.843.424 MembraneCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire routing equipment7.11 Delays to outputs10 Test conditionLPCB Ref.No.Fike Safety Technology LtdUnit 31, Springvale Industrial Estate, Cwmbran, Gwent NP44 5BD, United KingdomTel: +44 (0)1633 865558 • Fax: +44 (0)1633 866656E-mail: fstinfo@fike.com • Website: www.fikesafetytechnology.co.ukCertificate No: 331q to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated Products507-0001 Quadnet, 4 loop analogue addressable control and indicating equipmentLPCB Ref.No.331q/01Incorporating the following units:10-0049 Main CIE Board10-0050 LED BoardSP14Q006-T LCD Module10-0051 Backplane10-0058 Loop Card10-0053 PSU InterfaceCertified with the following options with requirements from EN54-2:7.8 Output to fire alarm devices7.10.1 Output to fire protection equipment - Type A7.11 Delays to outputs7.12.2 Dependencies on more than one alarm signal - Type B8.3 Fault signals from points8.9 Fault warning routing equipment9.5 Disablement of each addressable point10 Test conditionNote:1. This product approval does not constitute compliance with the fire detection andalarm systems requirements of EN 54-13507-0009 Quadnet, 4 loop analogue addressable control and indicating equipment with printer331q/02Incorporating the following units:10-0049 Main CIE Board10-0050 LED BoardSP14Q006-T LCD Module10-0051 Backplane10-0058 Loop Card10-0053 PSU Interface21-0005 PrinterCertified with the following options with requirements from EN54-2:7.8 Output to fire alarm devices7.10.1 Output to fire protection equipment - Type A7.11 Delays to outputs7.12.2 Dependencies on more than one alarm signal - Type B8.3 Fault signals from points8.9 Fault warning routing equipment9.5 Disablement of each addressable point62 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products10 Test conditionNote:1. This product approval does not constitute compliance with the fire detection andalarm systems requirements of EN 54-13LPCB Ref.No.510-0001 Duonet, 2 loop analogue addressable control and indicating equipment331q/04Incorporating the following units:10-0049 Main CIE Board10-0050 LED BoardSP14Q006-T LCD Module10-0069 Backplane10-0058 Loop Card10-0053 PSU InterfaceCertified with the following options with requirements from EN54-2:7.8 Output to fire alarm devices7.10.1 Output to fire protection equipment - Type A7.11 Delays to outputs7.12.2 Dependencies on more than one alarm signal - Type B8.3 Fault signals from points8.9 Fault warning routing equipment9.5 Disablement of each addressable point10 Test conditionNote:1. This product approval does not constitute compliance with the fire detection andalarm systems requirements of EN 54-13510-0003 Duonet, 2 loop analogue addressable control and indicating equipment with printer331q/05Incorporating the following units:10-0049 Main CIE Board10-0050 LED BoardSP14Q006-T LCD Module10-0069 Backplane10-0058 Loop Card10-0053 PSU Interface21-0005 PrinterCertified with the following options with requirements from EN54-2:7.8 Output to fire alarm devices7.10.1 Output to fire protection equipment - Type A7.11 Delays to outputs7.12.2 Dependencies on more than one alarm signal - Type B8.3 Fault signals from points8.9 Fault warning routing equipment9.5 Disablement of each addressable point10 Test conditionNote:1. This product approval does not constitute compliance with the fire detection andalarm systems requirements of EN 54-13505-0002 TWINFLEXpro, 2 Zone conventional control and indicating equipment331q/06Incorporating:10-0067 Main Processor Card.Certified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.10.1 Output type A to fire protection equipment7.11 Delays to outputs7.12.1 Type A dependency on more than one alarm signal8.3 Fault signals from points10 Test condition.505-0004 TWINFLEXpro, 4 Zone conventional control and indicating equipment331q/07Incorporating:10-0067 Main Processor Card.18 Jan 2014 63

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsCertified with the following options from EN 54 Part 2:LPCB Ref.No.7.8 Output to fire alarm devices7.10.1 Output type A to fire protection equipment7.11 Delays to outputs7.12.1 Type A dependency on more than one alarm signal8.3 Fault signals from points10 Test condition.505-0008 TWINFLEXpro, 8 Zone conventional control and indicating equipment331q/08Incorporating:10-0067 Main Processor Card10-0087 4 Zone expansion card.Certified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.10.1 Output type A to fire protection equipment7.11 Delays to outputs7.12.1 Type A dependency on more than one alarm signal8.3 Fault signals from points10 Test condition.Firelite by Honeywell (Pittway Systems Technology Group (Europe) Ltd)Honeywell Life Safety Systems, Charles Avenue, Burgess Hill, West Sussex RH15 9UF, United KingdomTel: +44 1444 230 300 • Fax: +44 1444 230 888E-mail: sales@morleyias.co.ukCertificate No: 154g to EN 54-2: 1997 + A1: 2006, EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsFLS2-8 2 ZoneFLS2-8 4 ZoneFLS2-8 8 Zone002-475-122 Language region 1, light grey002-489-122 Language region 1, light grey, English manual002-475-222 Language region 2, light grey002-489-222 Language region 2, light grey, English manualCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Output to automatic fire protection equipment: Type A7.10.3 Output to automatic fire protection equipment: Type C7.10.4 Fault monitoring of fire protection equipment7.11.1 Delays to outputs7.11.2 Manual or automatic switching of delays to outputs7.12.2 Dependency on more than one alarm signal: Type B8.9 Output to fault warning routing equipment10 Test condition002-475-142 Language region 1, light grey002-489-142 Language region 1, light grey, English manual002-475-242 Language region 2, light grey002-489-242 Language region 2, light grey, English manualCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Output to automatic fire protection equipment: Type A7.10.3 Output to automatic fire protection equipment: Type C7.10.4 Fault monitoring of fire protection equipment7.11.1 Delays to outputs7.11.2 Manual or automatic switching of delays to outputs7.12.2 Dependency on more than one alarm signal: Type B8.9 Output to fault warning routing equipment10 Test condition002-475-182 Language region 1, light grey002-489-182 Language region 1, light grey, English manualLPCB Ref.No.154g/06154g/07154g/0864 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products002-475-282 Language region 2, light grey002-489-282 Language region 2, light grey, English manualIncorporating the following units:020-747 8-way relay kit020-772 4-way monitored sounder kitCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Output to automatic fire protection equipment: Type A7.10.3 Output to automatic fire protection equipment: Type C7.10.4 Fault monitoring of fire protection equipment7.11.1 Delays to outputs7.11.2 Manual or automatic switching of delays to outputs7.12.2 Dependency on more than one alarm signal: Type B8.9 Output to fault warning routing equipment10 Test conditionLPCB Ref.No.Firesafe10 Sanderson Way, Marton, Blackpool FY4 4NB, United KingdomTel: 01253 699500 • Fax: 01253 699550E-mail: info@firesafe.co.uk • Website: www.firesafe.co.ukCertificate No: 176b-(cl-1) to EN 54-2: 1997+A1: 2006 and EN 54-4: 1997+A1: 2002+A2: 2006Certificated ProductsFXP502/XFXP501/XTwo Loop, 32 Zone Analogue addressable control and indicating equipment using ApolloProtocol, Metal housingIncorporating the following units:SPF0706000 Switch Mode Power supply boardSPF0501201 XFP Apollo 2 Loop, Main motherboardSPF0501200 Display board Keypad DisplayCertified with the following options with requirements from EN 54-2:19977.8 Output to fire alarm device(s)7.11 Delays to the auctioning of outputs fire alarm devices and fire routingequipment7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNotes:1. Scope of approval does not include the operation of the network functionality.One Loop, 32 Zone Analogue addressable control and indicating equipment using ApolloProtocol, Metal housingIncorporating the following units:SPF0706000 Switch Mode Power supply boardSPF0501211 XFP Apollo 1 Loop, Main motherboardSPF0501200 Display board Keypad DisplayCertified with the following options with requirements from EN 54-2:19977.8 Output to fire alarm device(s)7.11 Delays to the auctioning of outputs fire alarm devices and fire routingequipment7.12.1 Dependencies on more than one alarm signal Type ALPCB Ref.No.176b/02176b/0418 Jan 2014 65

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsFXP501E/XFCFP2NFCFP4NFCFP8N7.12.2 Dependencies on more than one alarm signal Type B7.12.3 Dependencies on more than one alarm signal Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNotes:1. Scope of approval does not include the operation of the network functionality.One Loop, 16 Zone Analogue addressable control and indicating equipment using Apolloprotocol, Plastic housingIncorporating the following units:SPF0702480 Switch Mode Power supply boardSPF0501101 XFP Apollo 1 Loop, Main motherboardCertified with the following options with requirements from EN 54-2:19977.8 Output to fire alarm device(s)7.11 Delays to the auctioning of outputs fire alarm devices and fire routingequipment7.12.1 Dependencies on more than one alarm signal Type A7.12.2 Dependencies on more than one alarm signal Type B7.12.3 Dependencies on more than one alarm signal Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNotes:1. Scope of approval does not include the operation of the network functionality.Two zone conventional control and indicating equipmentIncorporating the units:SPF0702480 Switch mode power supply unit boardSPF0724851 2 Zone main control boardCertified with the following options with requirements from EN 54-2: 19977.8 Output to fire alarm devices(s)7.11 Delays to outputs10 Test conditionFour zone conventional control and indicating equipmentIncorporating the units:SPF0702480 Switch mode power supply unit boardSPF0724853 4 Zone main control boardCertified with the following options with requirements from EN 54-2: 19977.8 Output to fire alarm devices(s)7.11 Delays to outputs10 Test conditionEight zone conventional control and indicating equipmentIncorporating the units:SPF0702480 Switch mode power supply unit boardSPF0724855 8 Zone main control boardCertified with the following options with requirements from EN 54-2: 19977.8 Output to fire alarm devices(s)7.11 Delays to outputs10 Test conditionLPCB Ref.No.176b/06176b/07176b/08176b/0966 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTGent By Honeywell (Novar Systems Ltd)140 Waterside Road, Hamilton Industrial Park, Leicester LE5 1TN, United KingdomTel: +44 (0)116 246 2000 • Fax: +44 (0)116 246 2300E-mail: gent_enquiry@gent.co.uk • Website: www.gent.co.ukMiddle East Sales EnquiriesE-mail: gent.export@honeywell.comCertificate No: 042x to EN 54: Parts 2 & 4: 1997Certificate No: 042bb to EN 54-2: 1997 and EN 54-4: 1997Certificate No: 042bm to EN 54-2: 1997 + A1: 2006, EN 54-4: 1997 + A1: 2002 + A2: 2006 and EN 54-16: 2008Certificate No: 042bc to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsAS-2000Nano-24Nano-24-SPNano-24-POTwo loop analogue addressable control and indicating equipmentIncorporating as modular units:2434-824 Power supply2434-710 Loop Processor Card2434-833 Master Control Card2434-825 Optical Network Card*2434-821 Message Store Card*2434-822 Mother board2434-835 H.M.I2434-840 Cold fire card2434-796 Addressable speaker card (Optional Card)*2434-826 Addressable daughter speaker card (Optional Card)*2434-780 Audio Input Card (Optional Card)*2434-781 Audio Output Card (Optional Card)*Scope of approval does not include the functionality of the network card and optionalvoice alarm system cards.Certified with the following options from EN 54 Part 2: 19977.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionSingle loop analogue addressable control and indicating equipmentIncorporating as modular units:2434-881 Mother board2434-862 Power supply2434-887 H.M.I (Human Machine Interface)Certified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points10 Test conditionSingle loop analogue addressable control and indicating equipment (Spanish LanguageVariant)Incorporating as modular units:2434-881 Mother board2434-862 Power supply2434-887 H.M.I (Human Machine Interface)Certified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points10 Test conditionSingle loop analogue addressable control and indicating equipment(Portuguese Language Variant)Incorporating as modular units:2434-881 Mother board2434-862 Power supply2434-887 H.M.I (Human Machine Interface)LPCB Ref.No.042bb/01042bc/01042bc/02042bc/0318 Jan 2014 67

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsVigilon Compact-24-NVigilon Compact-24-POVigilon Compact-24-SPVigilon VIG1-24Certified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points10 Test conditionTwo loop analogue addressable control and indicating equipment(English language)Incorporating as modular units:2434-859 Master Controller Board (MCB)2434-862 Power Supply Unit2434-762 Display and Key card (DKC)2434-669 Loop processor card4374-161 Text Membrane (English)2434-861 Copper network card(Note: Scope of approval does not include the operation of the network card)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionTwo loop analogue addressable control and indicating equipment(Portuguese language variant)Incorporating as modular units:2434-859 Master Controller Board (MCB)2434-862 Power Supply Unit2434-762 Display and Key card (DKC)2434-669 Loop processor card4374-163 Text Membrane (Portuguese)2434-861 Copper network card(Note: Scope of approval does not include the operation of the network card)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.11 Delays to outputsTwo loop analogue addressable control and indicating equipment(Spanish language variant)Incorporating as modular units:2434-859 Master Controller Board (MCB)2434-862 Power Supply Unit2434-762 Display and Key card (DKC)2434-669 Loop processor card4374-162 Text Membrane (Spanish)2434-861 Copper network card(Note: Scope of approval does not include the operation of the network card)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionOne to Four loop analogue addressable control and indicating equipment(English language)Incorporating as modular units:2434-863 Master controller card (M.C.C)2434-710 Loop card2434-831 Power supply PCB2434-854 Backplane PCB2434-861 Display and Key card (D.K.C)2434-864 Terminal card2434-565 Printer Module4374-157 Text Membrane (English)2434-674 Copper network card(Note: Scope of approval does not include the operation of the network card)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of each address pointLPCB Ref.No.042bc/04042bc/05042bc/06042bc/0768 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsVigilon VIG1-24-NPVigilon VIG1-24-POVigilon VIG1-24-SPVigilon VIG1-7210 Test conditionOne to Four loop analogue addressable control and indicating equipment(English language variant without printer module)Incorporating as modular units:2434-863 Master controller card (M.C.C)2434-710 Loop card2434-831 Power supply PCB2434-854 Backplane PCB2434-861 Display and Key card (D.K.C)2434-864 Terminal card4374-157 Text Membrane (English)2434-674 Copper network card(Note: Scope of approval does not include the operation of the network card)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionOne to Four loop analogue addressable control and indicating equipment(Portuguese language variant without printer module)Incorporating as modular units:2434-863 Master controller card (M.C.C)2434-710 Loop card2434-831 Power supply PCB2434-854 Backplane PCB2434-861 Display and Key card (D.K.C)2434-864 Terminal card4374-159 Text Membrane (Portuguese)2434-674 Copper network card(Note: Scope of approval does not include the operation of the network card)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionOne to Four loop analogue addressable control and indicating equipment(Spanish language variant without printer module)Incorporating as modular units:2434-863 Master controller card (M.C.C)2434-710 Loop card2434-831 Power supply PCB2434-854 Backplane PCB2434-861 Display and Key card (D.K.C)2434-864 Terminal card2434-565 Printer Module4374-158 Text Membrane (Spanish)2434-674 Copper network card(Note: Scope of approval does not include the operation of the network card)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionOne to Six loop analogue addressable control and indicating equipment(English Language)Incorporating as modular units:2434-863 Master controller card (M.C.C)2434-710 Loop card2434-992 Thermistor board2434-860 Battery terminal board2434-832 Power supply PCB2434-854 Backplane PCB2434-761 Display and Key card (D.K.C)2434-864 Terminal card2434-565 Printer module4374-157 Text Membrane (English)LPCB Ref.No.042bc/08042bc/09042bc/10042bc/1118 Jan 2014 69

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsVigilon VIG1-72-POVigilon VIG1-72-SPCompact VA2434-674 Copper network card(Note: Scope of approval does not include the operation of the network card)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionOne to Six loop analogue addressable control and indicating equipment(Portuguese Language Variant without printer module)Incorporating as modular units:2434-863 Master controller card (M.C.C)2434-710 Loop card2434-992 Thermistor board2434-860 Battery terminal board2434-832 Power supply PCB2434-854 Backplane PCB2434-761 Display and Key card (D.K.C)2434-864 Terminal card2434-565 Printer module4374-159 Text Membrane (Portuguese)2434-674 Copper network card(Note: Scope of approval does not include the operation of the network card)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionOne to Six loop analogue addressable control and indicating equipment(Spanish Language Variant without printer module)Incorporating as modular units:2434-863 Master controller card (M.C.C)2434-710 Loop card2434-992 Thermistor board2434-860 Battery terminal board2434-832 Power supply PCB2434-854 Backplane PCB2434-761 Display and Key card (D.K.C)2434-864 Terminal card2434-565 Printer module4374-158 Text Membrane (Spanish)2434-674 Copper network card(Note: Scope of approval does not include the operation of the network card)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionTwo loop voice alarm CIE with distributed mains powered amplifierIncorporating as modular units within the Compact-VA:2434-669LUGI Compact Loop Card2434-859LUGI Compact Network Control Card2434-862LUGI Compact Network PSU Card2434-870LUGI Multiformat DKC Compact VA2434-792 Audio Control Card2434-023 MPEG Speech Card2434-722 ACU DKC CardIncorporating as modular units within the Distributed Amplifier Unit:2434-897LUGI Mains powered DAU PSU Card2434-875 Mains Powered DAU Control Card2434-876 Mains Powered DAU Amplifier2434-880 MPEG Speech CardCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devicesLPCB Ref.No.042bc/12042bc/13042bm/0170 18 Jan 2014

Certificated Products7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionPART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTLPCB Ref.No.Certified with the following options with requirements from EN 54-16:7.3 Audible warning7.6.2 Manual silencing of the voice alarm condition7.7.2 Manual reset of the voice alarm condition7.8 Output to fire alarm devices8.3 Indication of faults related to the transmission path to the CIE8.4 Indication of faults related to voice alarm zones12.0 Emergency microphones13.14 Redundant power amplifiersNotes:1. This product approval does not constitute compliance with the fire detection andalarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.13270-01 1 zone conventional control and indicating equipment 042x/01Certified with the following options from EN 54 Part 2: 19977.8 Output to fire alarm devices7.11 Delays of actioning to outputs to fire alarm routing equipment10 Test conditionXenex 1 13270-01LB 1 zone conventional control and indicating equipment042x/01(Xenex brand)Certified with the following options from EN 54 Part 2: 19977.8 Output to fire alarm devices7.11 Delays of actioning to outputs to fire alarm routing equipment10 Test condition13270-02 2 zone conventional control and indicating equipment 042x/02Certified with the following options from EN 54 Part 2: 19977.8 Output to fire alarm devices7.11 Delays of actioning to outputs to fire alarm routing equipment10 Test conditionXenex 2 13270-02LB 2 zone conventional control and indicating equipment042x/02(Xenex brand)Certified with the following options from EN 54 Part 2: 19977.8 Output to fire alarm devices7.11 Delays of actioning to outputs to fire alarm routing equipment10 Test condition13270-04 4 zone conventional control and indicating equipment 042x/03Certified with the following options from EN 54 Part 2: 19977.8 Output to fire alarm devices7.11 Delays of actioning to outputs to fire alarm routing equipment10 Test conditionXenex 4 13270-04LB 4 zone conventional control and indicating equipment042x/03brand)Certified with the following options from EN 54 Part 2: 19977.8 Output to fire alarm devices7.11 Delays of actioning to outputs to fire alarm routing equipment10 Test condition13270-08 8 zone conventional control and indicating equipment 042x/04Certified with the following options from EN 54 Part 2: 19977.8 Output to fire alarm devices7.11 Delays of actioning to outputs to fire alarm routing equipment10 Test conditionXenex 8 13270-08LB 8 zone conventional control and indicating equipment042x/04(Xenex brand)Certified with the following options from EN 54 Part 2: 19977.8 Output to fire alarm devices7.11 Delays of actioning to outputs to fire alarm routing equipment10 Test condition18 Jan 2014 71

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTGulf Security Technology Co., Ltd.No 80 Changjiang East Road, QETDZ, Qinhuangdao, Hebei Province 066004, ChinaTel: +86 0335 8502434 • Fax: +86 0335 8502532E-mail: sales@fs.utc.com • Website: www.gst.com.cnSales Beijing:Tel: +86 (10) 6439 1866 • Fax: +86 (10) 6439 1787Sales Hong Kong:Tel: +852 2877 8566 • Fax: +852 2511 8699Certificate No: 548j to EN 54-2:1997, EN 54-4:1997 + A1: 2002Control and indicating equipmentCertificated ProductsGST-200Intelligent 1 loop, 30 zone, analogue addressable control and indicating equipmentLPCB Ref.No.548j/01Incorporating the following units:F7.820.826 Main boardF7.908.312 Zone indication boardF7.820.827 Switch boardF7.820.828 Loop interface boardF7.820.829 Power Supply unitF2.910.093 Mains filterR150 TransformerCGM12864 Alphanumeric DisplayF2.828.630a Printer board (option)Incorporating as optional modular units:P-9901 Printer module kitF7.820.170 RS232 board for configurationCertified with the following options with requirements from EN 54 part 2:7.8 Output to Fire Alarm Devices7.10 Output to automatic Fire Protection Equipment7.11 Delays to outputs7.12 Coincidence detection8.3 Fault signals from points9.5 Disablement of addressable pointsGST 101 Single zone conventional control and indicating equipment 548j/02Certified with the following options with requirements from EN 54 part 2:7.8 Output to Fire Alarm Devices10 Test conditionGST 102 Two zone conventional control and indicating equipment 548j/03Certified with the following options with requirements from EN 54 part 2:7.8 Output to Fire Alarm Devices10 Test conditionGST 104 Four zone conventional control and indicating equipment 548j/04Certified with the following options with requirements from EN 54 part 2:7.8 Output to Fire Alarm Devices7.11 Delays to outputs10 Test conditionGST 108 Eight zone conventional control and indicating equipment 548j/08Certified with the following options with requirements from EN 54 part 2:7.8 Output to Fire Alarm Devices7.11 Delays to outputs10 Test conditionGST 116 Sixteen zone conventional control and indicating equipment 548j/09Certified with the following options with requirements from EN 54 part 2:7.8 Output to Fire Alarm Devices7.11 Delays to outputs10 Test condition72 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificate No: 548p to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsGST200-2GST-IFP8GST102AIntelligent 2 loop, 30 zone analogue addressablecontrol and indicating equipmentIncorporating the following units:MB-220/ F7.820.826 Main boardSB-220/ F7.820.827 Switch boardTB-220/ F7.820.828 Loop interface boardPS-220/ F7.820.829b Power supply unitZP-220/ F7.908.312d Zone indication and intervention boardLC200/ F7.820.1125 Loop boardIncorporating as optional modular units:P-9930/ F7.820.170 RS-232 board for configurationP-9901A Printer module kitOptional language variants:10104672 Portuguese language variant10104674 Hungarian language variantCertified with the following options with requirements from EN 54 part 2:7.8 Output to Fire Alarm Devices7.10.1 Output to automatic Fire Protection Equipment Type A7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of addressable pointsIntelligent 8 loop, 140 zone analogue addressablecontrol and indicating equipmentIncorporating the following units:SB-800/ F7.820.1238 Indication boardLCIFP8/ F7.820.1239 Loop boardPB-800/ F7.820.1311 Power boardZP-800/ F7.820.1312 ZCP boardKB-800/ F7.820.1326 Keypad boardMB-800/ F7.820.1237 Main boardMO-800/ F7.820.1310 Mother boardIncorporating as optional modular units:P-9935/ F7.820.1313 USB communication boardOptional language variants:10104673 Portuguese language variant10104675 Hungarian language variantCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire routing equipment7.9.2 Alarm confirmation input from fire routing equipment7.10.1 Output type A7.10.2 Output type B7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test condition2 Zone conventional control and indicating equipmentIncorporating the following modules:FC-102A/ F7.843.399 MembraneCB-102A/ F2.908.1719 Control board with integrated PSEDB-102A/ F2.908.1722 Display boardOptional modules:10104648 Traditional Chinese text variantCF-102A/ F7.843.421 MembraneLPCB Ref.No.548p/01548p/02548p/0318 Jan 2014 73

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsGST104AGST108AGST116AGST200NCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire routing equipment7.11 Delays to outputs10 Test condition4 Zone conventional control and indicating equipmentIncorporating the following modules:FC-104A/ F7.843.400 MembraneCB-104A/ F2.908.1718 Control board with integrated PSEDB-104A/ F2.908.1721 Display boardOptional modules:10104649 Traditional Chinese text variantCF-104A/ F7.843.422 MembraneCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire routing equipment7.11 Delays to outputs10 Test condition8 Zone conventional control and indicating equipmentIncorporating the following modules:FC-108A/ F7.843.401 MembraneCB-108A/ F2.908.1675 Control board with integrated PSEDB-108A/ F2.908.1720 Display boardOptional modules:10104650 Traditional Chinese text variantCF-108A/ F7.843.423 MembraneCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire routing equipment7.11 Delays to outputs10 Test condition16 Zone conventional control and indicating equipmentIncorporating the following modules:FC-116A/ F7.843.402 MembraneXB-116A/ F2.908.1724 Control board with integrated PSEDB-116A/ F2.908.1676 Display boardCB-116A/ F7.820.1677 Expansion boardOptional modules:10104651 Traditional Chinese text variantCF-116A/ F7.843.424 MembraneCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire routing equipment7.11 Delays to outputs10 Test conditionIntelligent 2 loop, 30 zone analogue addressable control and indicating equipmentIncorporating the following units:MB-220/ F7.820.826a Main boardP-9960A/ F7.820.1943 CAN network card loop type boardPS-220/ F7.820.1939 Power management boardOX-220/ F7.820.1857 Terminal boardZP-220/ F7.820.312d Zone indication and intervention boardSB-220/ F7.820.827 Switch boardTB-220/ F7.820.828a Loop interface boardLC200/ F7.820.1125 Loop boardPDF-150-27.5. Powerld SMPS 100-240V power supplyIncorporating as optional modular units:P-9930/ F7.820.913a RS-232 board for configurationP-9901A Printer module kitOptional language variants:LPCB Ref.No.548p/04548p/05548p/06548p/0774 18 Jan 2014

Certificated Products10104672 Portuguese language variant10104674 Hungarian language variantPART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTLPCB Ref.No.Certified with the following options with requirements from EN 54 part 2:7.8 Output to Fire Alarm Devices7.10.1 Output to automatic Fire Protection Equipment Type A7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of addressable pointsNote : Scope of approval does not include network functionality.Haes Systems LimitedColumbia House, Packet Boat Lane, Cowley Peachey, Uxbridge, Middlesex UB8 2JP, United KingdomTel: +44 (0)1895 422066 • Fax: +44 (0)1895 420603E-mail: enquiries@haes-systems.co.uk • Website: www.haes-systems.co.ukCertificate No: 810a to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsFBUS X-Y-ZFBUL X-Y-Z1 to 4 Loop analogue addressable and/or 4-20 Zone conventionalcontrol and indicating equipmentIncorporating as modular units:FSB17 Main Display PCBFSB10 Expander PCBPSUFUSION-3A 3A Power Supply Control PCBPSULS100-36 36V 100W Lambda Power supply ModuleCabinet size 340H x 460W x 120D mmand as optional modules:FSB18 4 Way Conventional zone PCBFSB11 1 Loop Card Apollo protocolFSB10-E Bank Extender PCBFSB12-32 16 Way expansion LED PCBFSB12-64 48 Way expansion LED PCBCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.11 Delays to outputs9.5 Disablement of each addressable point10 Test conditionNotes:1. Model name suffix X denote the LED display module type, Y denote thenumber of conventional zones and Z denote the number of loops.2. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.1 to 8 Loop analogue addressable and/or 4-64 zone conventionalcontrol and indicating equipmentIncorporating as modular units:FSB17 Main Display PCBFSB10 Expander PCBPSUFUSION-5A 5A Power Supply Control PCBPSULS150-36 36V 150W Lambda Power supply ModuleCabinet size 750H x 470W x 140D mmand as optional modules:FSB18 4 Way Conventional zone PCBFSB11 1 Loop Card Apollo protocolFSB10-E Bank Extender PCBFSB12-32 16 Way expansion LED PCBLPCB Ref.No.810a/01810a/0218 Jan 2014 75

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsFSB12-64 48 Way expansion LED PCBCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.11 Delays to outputs9.5 Disablement of each addressable point10 Test conditionNotes:LPCB Ref.No.1. Model name suffix X denote the LED display module type, Y denote thenumber of conventional zones and Z denote the number of loops.2. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.ECLiPSE 4 and 2 Zone conventional control and indicating equipment810a/03Excel-ENIncorporating as modular units:TPC A01- E2 Eclipse two zone main PCB applicable on 2 zone CIE onlyTPC A02 ZoneFinder LED display PCBPSM1.5 - 24 Power supply 1.5A ratedCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.12.1 Dependency on more than one alarm signal type A10 Test conditionIncorporating as modular units:TPC A01- E4 Eclipse four zone main PCB applicable on 4 zone CIE onlyTPC A02 Eclipse LED display PCBPSM1.5 - 24 Power supply 1.5A ratedCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.12.1 Dependency on more than one alarm signal type A10 Test conditionNote:1. This product approval does not constitute compliance with the firedetection and alarm systems requirements of EN 54-13.2,4, 6, 8 and 12 Zone conventional control and indicating equipmentExcel-EN 2 Zone Conventional Control Panel (Manufacturers internal code XLEN-2)Incorporating as modular units:TPCA01-X 2 XLEN 2 Zone Main PCBTPCA03 XLEN Display BoardPSM3.0-24 Power SupplyExcel-EN 4 Zone Conventional Control Panel (Manufacturers internal code XLEN-4)Incorporating as modular units:TPCA01-X4 XLEN 4 Zone Main PCBTPCA03 XLEN Display BoardPSM3.0-24 Power SupplyExcel-EN 6 Zone Conventional Control Panel (Manufacturers internal code XLEN-6H)Incorporating as modular units:TPCA01-X2 XLEN 2 Zone Main PCBTPCA03 XLEN Display BoardTPCA04-H XLEN High Spec 4 Zone Extension BoardPSM3.0-24 Power SupplyExcel-EN 6 Zone Conventional Control Panel (Manufacturers internal code XLEN-6)Incorporating as modular units:TPCA01-X2 XLEN 2 Zone Main PCBTPCA03 XLEN Display BoardTPCA04-S XLEN Standard 4 Zone Extension BoardPSM3.0-24 Power SupplyExcel-EN 8 Zone Conventional Control Panel (Manufacturers internal code XLEN-8)810a/0476 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsIncorporating as modular units:TPCA01-X4 XLEN 4 Zone Main PCBTPCA03 XLEN Display BoardTPCA04-H XLEN High Spec 4 Zone Extension BoardPSM3.0-24 Power SupplyExcel-EN 8 Zone Conventional Control Panel (Manufacturers internal code XLEN-8L)Incorporating as modular units:TPCA01-X4 XLEN 4 Zone Main PCBTPCA03 XLEN Display BoardTPCA04-S XLEN Standard 4 Zone Extension BoardPSM3.0-24 Power SupplyExcel-EN 12 Zone Conventional Control Panel (Manufacturers internal code XLEN-12)TPCA01-X4 XLEN 4 Zone Main PCBTPCA03 XLEN Display BoardTPCA04-S XLEN Standard 4 Zone Extension BoardTPCA04-H XLEN High Spec 4 Zone Extension BoardPSM3.0-24 Power SupplyExcel-EN 12 Zone Conventional Control Panel (Manufacturers internal code XLEN-12L)TPCA01-X4 XLEN 4 Zone Main PCBTPCA03 XLEN Display BoardTPCA04-S Two XLEN Standard 4 Zone Extension BoardPSM3.0-24 Power SupplyExcel-EN 12 Zone Conventional Control Panel (Manufacturers internal code XLEN-12H)Incorporating as modular units:TPCA01-X4 XLEN 4 Zone Main PCBTPCA03 XLEN Display BoardTPCA04-H Two XLEN High Spec 4 Zone Extension BoardPSM3.0-24 Power SupplyCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs7.12.1 Dependency on more than one alarm signal type A7.12.2 Dependency on more than one alarm signal type B7.12.3 Dependency on more than one alarm signal type C10 Test conditionNote:1. This product approval does not constitute compliance with the fire detection and alarmsystems requirements of EN 54-13.LPCB Ref.No.Honeywell Control Systems LtdHoneywell House, Arlington Business Park, Bracknell, Berkshire RG12 1EB, United KingdomTel: 01344 655609 • Fax: 01344 655474Website: www.honeywell.comCertificate No: 154g-(cl-1) to EN 54-2: 1997 + A1: 2006, EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsXLS80eBasic Equipment Kit, (BEK): Modular analogue addressable control and indicatingequipment.020-538-101 XLS80e Basic Equipment Kit, Group 1020-538-103 XLS80e Basic Equipment Kit, Group 3020-538-104 XLS80e Basic Equipment Kit, Group 4020-538-105 XLS80e Basic Equipment Kit, Group 5Incorporating the following as modular units:Enclosures:020-040-002 Cover Kit Extended Moulded, Light / Grey020-472-002 Backbox Kit Standard, Light GreyLPCB Ref.No.154g/0118 Jan 2014 77

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsXLS80e-2L020-473-002 Backbox Kit Extended, Light Grey020-474-002 Backbox Kit Extended Deep, Light Grey020-475-002 Backbox Kit Double Extended, Light Grey020-476-002 Backbox Kit Double Extended Deep, Light Grey020-480-102 Main Cover Kit, Light / Grey020-481-002 Extension Cover Kit, Light / Grey020-509-002 Backbox Extension Deep Assembly Light / Grey020-621-002 256 Zone Extension Cover, Light / Grey020-541-102 PSU7A / 78Ah Battery EnclosureModules:020-708-100 Extension Chassis with Printer Kit020-644-009 Printer Assembly020-559-101 Zone Extension Chassis Kit 1-64 Zone C/W Display Module020-559-102 Zone Extension Chassis Kit 65-128 Zone C/W Display Module020-612-100 Double Extended Chassis Kit 256 Zone020-708-009 Extension Chassis with Printer020-644-009 Printer Assembly020-588-100 Honeywell Dual Loop Interface Board, (LIB)020-549-100 Honeywell Dual Enhanced Loop Interface Board, (ELIB)020-478 RS232 Interface020-479 RS485 Interface020-648 PSU3A020-579 PSU7A, (Requires Dual Transmission Path / Booster, PSUInterface)020-548 PSU7A Status Indication020-543 Dual Transmission Path / Booster, PSU Interface020-773 Routing Termination Unit (DEOL)020-877 Extinguishing Interface Module M221-SI020-643 XLS80e-NI Fibre Optic Interface Kit020-647-100 XLS80e-NI Network Gateway Module, (NGM) for use in XLS80ePanelCertified with the following options with requirements:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Output to fire protection equipment type A7.10.3 Output to fire protection equipment type C7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.2 Dependency on more than one alarm signal type B7.12.3 Dependency on more than one alarm signal type C7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablements of addressable points10 Test conditionNote 1: Products are available in language variants as follows:Group 1: English, Spanish, Portuguese, Icelandic and ItalianGroup 3: English, Swedish, Danish, Norwegian and FinishGroup 4: English, Czech and PolishGroup 5: English and CyrillicNote 2: Fixed build products incorporate a corresponding Basic Equipment Kit.Fixed build 2 loop analogue addressable control and indicating equipment.020-692 XLS80e-2L-1, 2 Loop, PSU3A, Group 1020-692-103 XLS80e-2L-3, 2 Loop, PSU3A, Group 3020-692-104 XLS80e-2L-4, 2 Loop, PSU3A, Group 4020-692-105 XLS80e-2L-5, 2 Loop, PSU3A, Group 5Incorporating the following as modular units:Enclosures:020-040-002 Cover Kit Extended Moulded, Light / Grey020-472-002 Backbox Kit Standard, Light Grey020-473-002 Backbox Kit Extended, Light Grey020-474-002 Backbox Kit Extended Deep, Light Grey020-475-002 Backbox Kit Double Extended, Light Grey020-476-002 Backbox Kit Double Extended Deep, Light Grey020-480-102 Main Cover Kit, Light / Grey020-481-002 Extension Cover Kit, Light / Grey020-509-002 Backbox Extension Deep Assembly Light / Grey020-621-002 256 Zone Extension Cover, Light / GreyLPCB Ref.No.154g/0178 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsXLS80e-4L020-541-102 PSU7A / 78Ah Battery EnclosureModules:020-708-100 Extension Chassis with Printer Kit020-644-009 Printer Assembly020-559-101 Zone Extension Chassis Kit 1-64 Zone C/W Display Module020-559-102 Zone Extension Chassis Kit 65-128 Zone C/W Display Module020-612-100 Double Extended Chassis Kit 256 Zone020-708-009 Extension Chassis with Printer020-644-009 Printer Assembly020-588-100 Honeywell Dual Loop Interface Board, (LIB)020-549-100 Honeywell Dual Enhanced Loop Interface Board, (ELIB)020-478 RS232 Interface020-479 RS485 Interface020-648 PSU3A020-579 PSU7A, (Requires Dual Transmission Path / Booster, PSUInterface)020-548 PSU7A Status Indication020-543 Dual Transmission Path / Booster, PSU Interface020-773 Routing Termination Unit (DEOL)020-877 Extinguishing Interface Module M221-SI020-643 XLS80e-NI Fibre Optic Interface Kit020-647-100 XLS80e-NI Network Gateway Module, (NGM) for use in XLS80ePanelCertified with the following options with requirements:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Output to fire protection equipment type A7.10.3 Output to fire protection equipment type C7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.2 Dependency on more than one alarm signal type B7.12.3 Dependency on more than one alarm signal type C7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablements of addressable points10 Test conditionNote 1: Products are available in language variants as follows:Group 1: English, Spanish, Portuguese, Icelandic and ItalianGroup 3: English, Swedish, Danish, Norwegian and FinishGroup 4: English, Czech and PolishGroup 5: English and CyrillicNote 2: Fixed build products incorporate a corresponding Basic Equipment Kit.Fixed build 4 loop analogue addressable control and indicating equipment.020-693 XLS80e-4L-1, 4 Loop, PSU3A, Group 1020-693-103 XLS80e-4L-3, 4 Loop, PSU3A, Group 3020-693-104 XLS80e-4L-4, 4 Loop, PSU3A, Group 4020-693-105 XLS80e-4L-5, 4 Loop, PSU3A, Group 5Incorporating the following as modular units:Enclosures:020-040-002 Cover Kit Extended Moulded, Light / Grey020-472-002 Backbox Kit Standard, Light Grey020-473-002 Backbox Kit Extended, Light Grey020-474-002 Backbox Kit Extended Deep, Light Grey020-475-002 Backbox Kit Double Extended, Light Grey020-476-002 Backbox Kit Double Extended Deep, Light Grey020-480-102 Main Cover Kit, Light / Grey020-481-002 Extension Cover Kit, Light / Grey020-509-002 Backbox Extension Deep Assembly Light / Grey020-621-002 256 Zone Extension Cover, Light / Grey020-541-102 PSU7A / 78Ah Battery EnclosureModules:020-708-100 Extension Chassis with Printer Kit020-644-009 Printer Assembly020-559-101 Zone Extension Chassis Kit 1-64 Zone C/W Display Module020-559-102 Zone Extension Chassis Kit 65-128 Zone C/W Display Module020-612-100 Double Extended Chassis Kit 256 Zone020-708-009 Extension Chassis with PrinterLPCB Ref.No.154g/0118 Jan 2014 79

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsXLS80e-6L020-644-009 Printer Assembly020-588-100 Honeywell Dual Loop Interface Board, (LIB)020-549-100 Honeywell Dual Enhanced Loop Interface Board, (ELIB)020-478 RS232 Interface020-479 RS485 Interface020-648 PSU3A020-579 PSU7A, (Requires Dual Transmission Path / Booster, PSUInterface)020-548 PSU7A Status Indication020-543 Dual Transmission Path / Booster, PSU Interface020-773 Routing Termination Unit (DEOL)020-877 Extinguishing Interface Module M221-SI020-643 XLS80e-NI Fibre Optic Interface Kit020-647-100 XLS80e-NI Network Gateway Module, (NGM) for use in XLS80ePanelCertified with the following options with requirements:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Output to fire protection equipment type A7.10.3 Output to fire protection equipment type C7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.2 Dependency on more than one alarm signal type B7.12.3 Dependency on more than one alarm signal type C7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablements of addressable points10 Test conditionNote 1: Products are available in language variants as follows:Group 1: English, Spanish, Portuguese, Icelandic and ItalianGroup 3: English, Swedish, Danish, Norwegian and FinishGroup 4: English, Czech and PolishGroup 5: English and CyrillicNote 2: Fixed build products incorporate a corresponding Basic Equipment Kit.Fixed build 6 loop analogue addressable control and indicating equipment.020-694 XLS80e-6L-1, 6 Loop, PSU7A, Group 1020-694-103 XLS80e-6L-3, 6 Loop, PSU7A, Group 3020-694-104 XLS80e-6L-4, 6 Loop, PSU7A, Group 4020-694-105 XLS80e-6L-5, 6 Loop, PSU7A, Group 5Incorporating the following as modular units:Enclosures:020-040-002 Cover Kit Extended Moulded, Light / Grey020-472-002 Backbox Kit Standard, Light Grey020-473-002 Backbox Kit Extended, Light Grey020-474-002 Backbox Kit Extended Deep, Light Grey020-475-002 Backbox Kit Double Extended, Light Grey020-476-002 Backbox Kit Double Extended Deep, Light Grey020-480-102 Main Cover Kit, Light / Grey020-481-002 Extension Cover Kit, Light / Grey020-509-002 Backbox Extension Deep Assembly Light / Grey020-621-002 256 Zone Extension Cover, Light / Grey020-541-102 PSU7A / 78Ah Battery EnclosureModules:020-708-100 Extension Chassis with Printer Kit020-644-009 Printer Assembly020-559-101 Zone Extension Chassis Kit 1-64 Zone C/W Display Module020-559-102 Zone Extension Chassis Kit 65-128 Zone C/W Display Module020-612-100 Double Extended Chassis Kit 256 Zone020-708-009 Extension Chassis with Printer020-644-009 Printer Assembly020-588-100 Honeywell Dual Loop Interface Board, (LIB)020-549-100 Honeywell Dual Enhanced Loop Interface Board, (ELIB)020-478 RS232 Interface020-479 RS485 Interface020-648 PSU3A020-579 PSU7A, (Requires Dual Transmission Path / Booster, PSUInterface)LPCB Ref.No.154g/0180 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsXLS80e-8L020-548 PSU7A Status Indication020-543 Dual Transmission Path / Booster, PSU Interface020-773 Routing Termination Unit (DEOL)020-877 Extinguishing Interface Module M221-SI020-643 XLS80e-NI Fibre Optic Interface Kit020-647-100 XLS80e-NI Network Gateway Module, (NGM) for use in XLS80ePanelCertified with the following options with requirements:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Output to fire protection equipment type A7.10.3 Output to fire protection equipment type C7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.2 Dependency on more than one alarm signal type B7.12.3 Dependency on more than one alarm signal type C7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablements of addressable points10 Test conditionNote 1: Products are available in language variants as follows:Group 1: English, Spanish, Portuguese, Icelandic and ItalianGroup 3: English, Swedish, Danish, Norwegian and FinishGroup 4: English, Czech and PolishGroup 5: English and CyrillicNote 2: Fixed build products incorporate a corresponding Basic Equipment Kit.Fixed build 8 loop analogue addressable control and indicating equipment.020-695 XLS80e-8L-1, 8 Loop, PSU7A, Group 1020-695-103 XLS80e-8L-3, 8 Loop, PSU7A, Group 3020-695-104 XLS80e-8L-4, 8 Loop, PSU7A, Group 4020-695-105 XLS80e-8L-5, 8 Loop, PSU7A, Group 5Incorporating the following as modular units:Enclosures:020-040-002 Cover Kit Extended Moulded, Light / Grey020-472-002 Backbox Kit Standard, Light Grey020-473-002 Backbox Kit Extended, Light Grey020-474-002 Backbox Kit Extended Deep, Light Grey020-475-002 Backbox Kit Double Extended, Light Grey020-476-002 Backbox Kit Double Extended Deep, Light Grey020-480-102 Main Cover Kit, Light / Grey020-481-002 Extension Cover Kit, Light / Grey020-509-002 Backbox Extension Deep Assembly Light / Grey020-621-002 256 Zone Extension Cover, Light / Grey020-541-102 PSU7A / 78Ah Battery EnclosureModules:020-708-100 Extension Chassis with Printer Kit020-644-009 Printer Assembly020-559-101 Zone Extension Chassis Kit 1-64 Zone C/W Display Module020-559-102 Zone Extension Chassis Kit 65-128 Zone C/W Display Module020-612-100 Double Extended Chassis Kit 256 Zone020-708-009 Extension Chassis with Printer020-644-009 Printer Assembly020-588-100 Honeywell Dual Loop Interface Board, (LIB)020-549-100 Honeywell Dual Enhanced Loop Interface Board, (ELIB)020-478 RS232 Interface020-479 RS485 Interface020-648 PSU3A020-579 PSU7A, (Requires Dual Transmission Path / Booster, PSUInterface)020-548 PSU7A Status Indication020-543 Dual Transmission Path / Booster, PSU Interface020-773 Routing Termination Unit (DEOL)020-877 Extinguishing Interface Module M221-SI020-643 XLS80e-NI Fibre Optic Interface Kit020-647-100 XLS80e-NI Network Gateway Module, (NGM) for use in XLS80ePanelLPCB Ref.No.154g/0118 Jan 2014 81

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsXLS80e-NICertified with the following options with requirements:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Output to fire protection equipment type A7.10.3 Output to fire protection equipment type C7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.2 Dependency on more than one alarm signal type B7.12.3 Dependency on more than one alarm signal type C7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablements of addressable points10 Test conditionNote 1: Products are available in language variants as follows:Group 1: English, Spanish, Portuguese, Icelandic and ItalianGroup 3: English, Swedish, Danish, Norwegian and FinishGroup 4: English, Czech and PolishGroup 5: English and CyrillicNote 2: Fixed build products incorporate a corresponding Basic Equipment Kit.002-467-002 Network Gateway Unit, (NGU) Honeywell ProtocolIncorporating the following as modular units:020-643 XLS80e- NI Fibre Optic Interface Kit020-647-100 XLS80e-NI Network Gateway Module, (NGM) for use inXLS80e Panel020-648 PSU3ANote 1: Products are available in language variants as follows:Group 1: English, Spanish, Portuguese, Icelandic and ItalianGroup 3: English, Swedish, Danish, Norwegian and FinishGroup 4: English, Czech and PolishGroup 5: English and CyrillicNote 2: Fixed build products incorporate a corresponding Basic Equipment Kit.LPCB Ref.No.154g/NO1Honeywell International Inc1500 West Dundee Road, Arlington Heights IL 60004, USATel: +1 847 797 4403 • Fax: +1 847 797 3664Website: www.honeywell.comCertificate No: 262z-(cl-1) to EN 54-2: 1997 + A1: 2006 & EN 54-4: 1997 + A1: 2002 + A2: 2006Certificate No: 262ab-(cl-1) to EN54-2: 1997+A1:2006, EN54-4:1997+A1:2002+A2:2006, EN54-16:2008Control and indicating equipmentCertificated ProductsXLS1000Incorporating as modular units:AnnunciatorsLPCB Ref.No.262ab/01EST3 24 LED Annunciators3-24Y Annunciator Bill of Materials3-24Y-E Annunciator Bill of Materials3-24R Annunciator Bill of Materials3-24R-E Annunciator Bill of Materials3-24G Annunciator Bill of Materials3-24G-E Annunciator Bill of Materials3-12RY Annunciator Bill of Materials3-12RY-E Annunciator Bill of MaterialsEST3 18 LED Annunciators3-6/3S1G2Y 3-6/3S1G2Y Annunciator Bill of Materials3-6/3S1G2Y-E 3-6/3S1G2Y Annunciator Bill of Materials3-6/3S1GYR 3-6/3S1GYR Annunciator Bill of Materials3-6/3S1GYR-E 3-6/3S1GYR Annunciator Bill of Materials82 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products3-6/3S2RY3-6/3S2RY Annunciator Bill of MaterialsLPCB Ref.No.EST3 Control-Display Switch/LEDs3-12SY 3-12SY 12 Switch-Yellow Bill of Materials3-12SY-E 3-12SY 12 Switch-Yellow Bill of Materials3-12SR 3-12SR 12 Switch-Red Bill of Materials3-12SR-E 3-12SR 12 Switch-Red Bill of Materials3-12SG 3-12SG 12 Switch-Green Bill of Materials3-12SG-E 3-12SG 12 Switch-Green Bill of Materials3-12/S1GY 3-12/S1GY 12 Switch-Green/Yellow3-12/S1GY-E 3-12/S1GY 12 Switch-Green/Yellow3-12/S1RY 3-12/S1RY 12 Switch-Red/Yellow Bill of Materials3-12/S1RY-E 3-12/S1RY 12 Switch-Red/Yellow Bill of Materials3-12/S2Y 3-12/S2Y - 12 Switches - 24 Yellow Bill of Materials3-12/S2R 3-12/S2R - 12 Switches - 24 Red Bill of MaterialsLoop Controller Modules3-SSDC1-E Signature (Single), driver controller module3-DSDC1-E Signature (Dual), driver controller module3-AADC1-E System Sensor driver control module3-SDC1-E Signature, driver controller module3-EAC-E Edwards Analog Driver Card3-EASC-E Edwards (Single) Analogue driver controller module3-EADC-E Edwards (Dual) Analogue driver controller modulePower Supplies3-PPS/M-230-E Primary Power Supply 230V3-BPS/M-230-E Booster Power Supply 230V3-BBC/M-230-E Booster, Battery Charger Power Supply 230V3-PSMON-E Primary Power Supply Monitor3-BPMON-E Booster Power Supply Monitor3-BBCMON-E Booster, Battery Charger Monitor3-CPU3 Central Processor Unit3-CPU3-E Central Processor Unit3-LDSM Annunciator strip support module3-LDSM-E Annunciator strip support module3-IDC 8/4 Initiating Device Circuits/NACS3-IDC 8/4-E Initiating Device Circuits/NACS3-LCD EST3 Main Display LCD, user interface3-LCD-E EST3 Main Display LCD, user interface3-LRMF Local Rail Module Filler3-RS485A Data Communication, Class A3-RS485A-E Data Communication, Class A3-RS485B Data Communication, Class B3-RS485B-E Data Communication, Class B3-RS232 Serial Communications Card (Printer, etc)3-RS232-E Serial Communications Card (Printer, etc)EFM-2 Data Communications Filter - 2 CircuitsEFM-10 Data Communications Filter - 10 CircuitsCabinets & Door Assemblies3-CAB7B-E Cabinet Back Box 3-CAB7B-E3-CAB14B-E Cabinet Back Box 3-CAB14B-E3-CAB21B-E Cabinet Back Box 3-CAB21B-ELobby Cabinet AssembliesXLS-CAB7D(R)-E XLS-CAB7D-E Door Assembly - (R) indicates redXLS-CAB14D(R)-E XLS-CAB14D-E Door Assembly - (R) indicates redXLS-CAB21D(R)-E XLS-CAB21D-E Door Assembly - (R) indicates redBattery CabinetsXLS-RCC7R-E XLS - CAB 7 Module Chassis - Remote Closet CabinetXLS-RCC14R-E XLS - CAB 14 Module Chassis - Remote Closet CabinetXLS-RCC21R-E XLS - CAB 21 Module Chassis - Remote Closet Cabinet3-BTSEN-E Remote battery cabinet interlace, temperature sensingXLS BC-1 Battery Cabinet3-TAMP Cabinet Tamper Switch for 3-CAB7/14/213-TAMPRCC Tamper Switch for 3-RCC CabinetAudio & Telephone Common Controls - Chassis Assemblies3-CHAS7 EST3 - CHASSIS 7 Module - Chassis Assy for 7 LRMs3-CHAS7-E EST3 - CHASSIS 7 Module - Chassis Assy for 7 LRMs18 Jan 2014 83

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsXLS10003-CHASS4 EST3 -CHASSIS 4 Mod - Chassis Assy for REMIC & 4 LRMs3-CHASS4-E EST3 -CHASSIS 4 Mod - Chassis Assy for REMIC & 4 LRMs3-ASU-E Audio Source Unit with a 3-Chassis - European3-ASU/4-E Audio Source Unit with 4 LRM slots - European3-ASUMX/100 100 minute extended audio memory card3-ASU/FT-EN Audio Source Unit with Fire Fighter Tele - European3-FTCU-E Firefighter Telephone Control Unit3-ZA20A 20 watt Zone Amplifier, Class A3-ZA20A-E 20 watt Zone Amplifier, Class A3-ZA20B 20 watt Zone Amplifier, Class B3-ZA20B-E 20 watt Zone Amplifier, Class B3-ZA40A 40 watt Zone Amplifier, Class A3-ZA40A-E 40 watt Zone Amplifier, Class A3-ZA40B 40 watt Zone Amplifier, Class B3-ZA40B-E 40 watt Zone Amplifier, Class B3-BATS Battery Shelf for Single 65AH Cell3-CBLKIT1 EST3 Extended Rail Cable Kit3-CPUDR EST3 CPU Door KitControl and indicating equipmentIncorporating as modular units:3-SSDC1-E Signature (Single), driver controller module3-SDDC1-E Signature (Dual), driver controller module3-AADC1-E System Sensor driver control module3-EASC-E Edwards (Single) Analogue driver controller module3-EADC-E Edwards (Dual) Analogue driver controller module3-PPS/M-230-E Primary Power Supply3-BPS/M-230-E Booster Power Supply3-BBC/M-230-E Booster Battery Charger Power Supply3-ASU Audio Source Unit3-ASU/FT-E Audio Source Unit with Fire Fighter Telephone3-ASUMX/100 100 minute extended audio memory card3ASU/4 Audio Source Unit with 4 Local Rail Modules (LRM) slots3-ZA20A 20 watt Zone Amplifier, Class A3-ZA20B 20 watt Zone Amplifier, Class B3-ZA40A 40 watt Zone Amplifier, Class A3-ZA40B 40 watts Zone Amplifier, Class B3-CPU3 Central Processor UnitEFM-2 Data Communications Filter3-ZA95 95 watt Zone Amplifier, Class A3-CAB7-E 7 Slot Cabinet3-CAB14-E 14 Slot Cabinet3-CAB21-E 21 Slot Cabinet3-CAB7D(R)-E Door for 7 Slot Cabinet, (R) indicates red3-CAB14D(R)-E Door for 14 Slot Cabinet, (R) indicates red3-CAB21D(R)-E Door for 21 Slot Cabinet, (R) indicates red3-RCC7R-E Small Remote Battery Cabinet3-RCC14R-E Medium Remote Battery Cabinet3-RCC21R-E Large Remote Battery Cabinet3-LCD Liquid Crystal Display, user interface3-BATSEN-E Remote battery cabinet interface, temperature sensing3-BATSEN Remote battery cabinet interface3-BATS Battery Shelf3-RS485A Data Communication, Class A3-RS485B Data Communication, Class B3-RS232 Serial Communications Card (Printer, etc)3-PSMON Primary Power Supply Monitor3-IDC8/4 Initiating Device Circuits/NACS3-24R 24, Red3-24Y 24, Yellow3-24G 24, Green3-12RY Red-over-yellow pairs3-12SR 12 Switches. Red3-12SY 12 Switches. Yellow3-12SG 12 Switches. Green3-12/S1GY 12 Switches. Green over-yellow pairs3-12/S1RY 12 Switches. Red over-yellow pairs3-12/S2Y 24, Yellow, 12 Switches3-12/S2R 24, Red, 12 Switches3-6/3S1G2Y Green-over-yellow-over-yellow triads, 6 triads3-6/3S1GYR Green-over-yellow-over-red triads, 6 triadsLPCB Ref.No.262z/0184 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsXLS10003-6/3S2RY Red-over-yellow-over-red triads, 6 triads3-BBCMON Booster, Battery Charger Monitor3-BPSMON Booster Power supply Monitor3-LDSM Annunciator strip support module3-LRMF Local Rail Module Filler3-FTCU MB Fire fighter Telephone Control Unit MB3-FTCU-E Fire fighter Telephone Control Unit Display3-REMICP Remote Microphone, Panel3-RCIC ASU Interconnect power and rail communication unitRepeaterIncorporating as modular units:3-RS485BA Remote Annunciator RS485 Communications.3-ANNCPU3 Remote Annunciator CPU3-LCDANN-E LCD Display and User Interface for Remote Annunciator3-ANNSM Remote (repeater) Annunciator Support Module3-REMICA Remote paging Microphone3-24Y 24, Yellow3-12/S1GY 12 Switches. Green over-yellow pairs3-6ANN-E(R) Remote Annunciator Back Box, 6 slots, with Door (R) indicates red3-10ANN-E(R) Remote Annunciator Back Box, 10 slots, with Door (R) indicates redCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.13 Alarm counter8.3 Fault Signals from points10 Test conditionLPCB Ref.No.262z/01RNotes:1. Scope of approval does not include system compatibility.Mavili Elektronik Ticaret Ve Sanayi A.S.Bostanci Dudullu Yolu, Kutup Sok, No. 29 Y Dudullu - Umraniye, Istanbul TR 34775, TurkeyTel: +90 216 4664 505 • Fax: +90 216 4664 510E-mail: mavili@mavili.com.tr • Website: www.mavigard.comCertificate No: 926d to EN 54-2: 1997 + A1: 2006, EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsML-1231.ENMaxlogic intelligent analogue addressable 1 Loop, 127 addressable devices, 64 Zonecontrol and indicating equipment.Incorporating the following units:MLY-1202.EN Main MCU moduleMLY-1203 Zone LED moduleMLY-1200SLCU moduleMLY-0500-EN PSU unitML-1201 Optional Network module542.188 Optional Turkish text membrane542.189 Optional English text membrane542.190 Optional Russian text membraneCertified with the following options with requirements from EN 54-2:19977.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.11 Delays to the auctioning of outputs fire alarm devices and fire routingequipment7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type BLPCB Ref.No.926d/0118 Jan 2014 85

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsML-1241.P.EN7.12.3 Dependencies on more than one alarm signal - Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNotes:1. Scope of approval does not include the operation of the network functionality.2. This product approval does not constitute compliance with the fire detection and alarmsystems requirements of EN54-13.Maxlogic intelligent analogue addressable 1 Loop, 127addressable devices, 64 Zonecontrol and indicating equipment with printerIncorporating the following units:MLY-1202.EN Main MCU moduleMLY-1203 Zone LED moduleMLY-1200 SLCU moduleMLY-0500-EN PSU unitML-1203 Printer moduleML-1201 Optional Network module542.188 Optional Turkish text membrane542.189 Optional English text membrane542.190 Optional Russian text membraneLPCB Ref.No.926d/01ML-1232.ENCertified with the following options with requirements from EN 54-2:19977.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.11 Delays to the auctioning of outputs fire alarm devices andfire routing equipment7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNotes:1. Scope of approval does not include the operation of the network functionality.2. This product approval does not constitute compliance with the fire detection and alarmsystems requirements of EN54-13.Maxlogic intelligent analogue addressable 2 Loop, 254 addressable devices, 64 Zonecontrol and indicating equipmentIncorporating the following units:MLY-1202.EN Main MCU moduleMLY-1203 Zone LED moduleMLY-1200 SLCU moduleMLY- 0500-EN PSU unitML-1201 Optional Network module542.188 Optional Turkish text membrane542.189 Optional English text membrane542.190 Optional Russian text membrane926d/02Certified with the following options with requirements from EN 54-2:19977.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.11 Delays to the auctioning of outputs fire alarm devices andfire routing equipment7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNotes:1. Scope of approval does not include the operation of the network functionality.86 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsML-1242.P.EN2. This product approval does not constitute compliance with the fire detection and alarmsystems requirements of EN54-13.Maxlogic intelligent analogue addressable 2 Loop, 254 addressable devices, 64 Zonecontrol and indicating equipment with printer.Incorporating the following units:MLY-1202.EN Main MCU moduleMLY-1203 Zone LED moduleMLY-1200 SLCU moduleMLY- 0500-EN PSU unitML-1203 Printer moduleML-1201 Optional Network module542.188 Optional Turkish text membrane542.189 Optional English text membrane542.190 Optional Russian text membraneLPCB Ref.No.926d/02ML-1233.ENCertified with the following options with requirements from EN 54-2:19977.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.11 Delays to the auctioning of outputs fire alarm devices andfire routing equipment7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNotes:1. Scope of approval does not include the operation of the network functionality.2. This product approval does not constitute compliance with the fire detection and alarmsystems requirements of EN54-13.Maxlogic intelligent analogue addressable 3 Loop, 381 addressable devices, 64 Zonecontrol and indicating equipment.Incorporating the following units:MLY-1202.EN Main MCU moduleMLY-1203 Zone LED moduleMLY-1200 SLCU moduleMLY- 0500-EN PSU unitML-1201 Optional Network module542.188 Optional Turkish text membrane542.189 Optional English text membrane542.190 Optional Russian text membrane926d/03ML-1234.ENCertified with the following options with requirements from EN 54-2:19977.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.11 Delays to the auctioning of outputs fire alarm devices andfire routing equipment7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNotes:1. Scope of approval does not include the operation of the network functionality.2. This product approval does not constitute compliance with the fire detection and alarmsystems requirements of EN54-13.Maxlogic intelligent analogue addressable 4 Loop, 508 addressable devices, 64 ZoneCIEIncorporating the following units:926d/0318 Jan 2014 87

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsMLY-1202.EN Main MCU moduleMLY-1203 Zone LED moduleMLY-1200 SLCU moduleMLY- 0500-EN PSU unitML-1201 Optional Network module542.188 Optional Turkish text membrane542.189 Optional English text membrane542.190 Optional Russian text membraneLPCB Ref.No.ML-1243.P.ENML-1244.P.ENCertified with the following options with requirements from EN 54-2:19977.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.11 Delays to the auctioning of outputs fire alarm devices andfire routing equipment7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNotes:1. Scope of approval does not include the operation of the network functionality.2. This product approval does not constitute compliance with the fire detection and alarmsystems requirements of EN54-13.Maxlogic intelligent analogue addressable 3 Loop, 381 addressable devices, 64 Zonecontrol and indicating equipment with printer.Incorporating the following units:MLY-1202.EN Main MCU moduleMLY-1203 Zone LED moduleMLY-1200 SLCU moduleMLY- 0500-EN PSU unitML-1203 Printer moduleML-1201 Optional Network module542.188 Optional Turkish text membrane542.189 Optional English text membrane542.190 Optional Russian text membraneCertified with the following options with requirements from EN 54-2:19977.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.11 Delays to the auctioning of outputs fire alarm devices andfire routing equipment7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNotes:1. Scope of approval does not include the operation of the network functionality.2. This product approval does not constitute compliance with the fire detection and alarmsystems requirements of EN54-13.Maxlogic intelligent analogue addressable 4 Loop, 508 addressable devices, 64 Zonecontrol and indicating equipment with printer.Incorporating the following units:MLY-1202.EN Main MCU moduleMLY-1203 Zone LED moduleMLY-1200 SLCU moduleMLY- 0500-EN PSU unitML-1203 Printer moduleML-1201 Optional Network module542.188 Optional Turkish text membrane542.189 Optional English text membrane926d/03926d/0488 18 Jan 2014

Certificated Products542.190 Optional Russian text membranePART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTLPCB Ref.No.Certified with the following options with requirements from EN 54-2:19977.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.11 Delays to the auctioning of outputs fire alarm devices andfire routing equipment7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.12.3 Dependencies on more than one alarm signal - Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNotes:1. Scope of approval does not include the operation of the network functionality.2. This product approval does not constitute compliance with the fire detection and alarmsystems requirements of EN54-13.Morley-IAS Fire Systems by Honeywell (Pittway Systems Technology Group (Europe)Ltd)Charles Avenue, Burgess Hill, West Sussex RH15 9UF, United KingdomTel: +44 (0)1444 230300 • Fax: +44 (0)1444 230888E-mail: sales@morleyias.co.uk • Website: www.morley-ias.co.ukCertificate No: 429c to EN 54-2: 1997 + A1: 2006, EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsZX1SeZX2Se1 loop analogue addressable control and indicating equipment722-001-301 1 loop multi-protocol control panel, language group M100722-001-302 1 loop multi-protocol control panel, language group M200722-002-301 1 loop multi-protocol control panel, language group M100,Stainless Steel722-101-301 1 loop multi-protocol control panel, language group H100722-101-302 1 loop multi-protocol control panel, language group H200Incorporating the following units:795-072-100 Morley-IAS Loop Driver Card795-068-100 System Sensor Loop Driver Card795-058-105 Hochiki Loop Driver Card795-066-100 Apollo XP95 / Discovery Loop Driver Card795-044-001 Nittan Loop Driver Card795-004-001 RS 485 Communication Module795-005 RS232 Communication Module124-206 Processor Card124-209-005 1 Loop Base Card124-370 4 Line Display CardPS82-2-NFR 2A PSUCertified with the following options with requirements from EN 54-2:7.11 Delays to outputs7.12.3 Dependency on more than one alarm signal: Type C8.3 Fault signals from points9.5 Disablement of addressable points10 Test condition1-2 loop analogue addressable control and indicating equipment720-001-301 1-2 loop multi-protocol control panel, language group M100720-001-302 1-2 loop multi-protocol control panel, language group M200720-002-301 1-2 loop multi-protocol control panel, language group M100,Stainless Steel720-101-301 1-2 loop multi-protocol control panel, language group H100LPCB Ref.No.429c/04429c/0518 Jan 2014 89

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsZX5SeHRZ2-8e 2 ZoneHRZ2-8e 4 ZoneHRZ2-8e 8 Zone720-101-302 1-2 loop multi-protocol control panel, language group H200Incorporating the following units:795-072-100 Morley-IAS Loop Driver Card795-068-100 System Sensor Loop Driver Card795-058-105 Hochiki Loop Driver Card795-066-100 Apollo XP95 / Discovery Loop Driver Card795-044-001 Nittan Loop Driver Card795-004-001 RS 485 Communication Module795-005 RS232 Communication Module124-206 Processor Card124-209-004 2 Loop Base Card124-370 4 Line Display CardPS82-2-NFR 2A PSUCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.11 Delays to outputs7.12.3 Dependency on more than one alarm signal: Type C8.3 Fault signals from points9.5 Disablement of addressable points10 Test condition1-5 loop analogue addressable control and indicating equipment721-001-301 1-5 loop multi-protocol control panel, language group M100721-001-302 1-5 loop multi-protocol control panel, language group M200721-002-301 1-5 loop multi-protocol control panel, language group M100,Stainless Steel721-101-301 1-5 loop multi-protocol control panel, language group H100721-101-302 1-5 loop multi-protocol control panel, language group H200Incorporating the following units:795-072-100 Morley-IAS Loop Driver Card795-068-100 System Sensor Loop Driver Card795-058-105 Hochiki Loop Driver Card795-066-100 Apollo XP95 / Discovery Loop Driver Card795-044-001 Nittan Loop Driver Card795-004-001 RS 485 Communication Module795-005 RS232 Communication Module795-077-020 20 Zone LED Display Indicator Card795-077-060 60 Zone LED Display Indicator Card795-051-001 Internal Printer Module124-206 Processor Card124-403 5 Loop Base Card124-370 4 Line Display CardPS196-4-NFR PSUCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.11 Delays to outputs7.12.3 Dependency on more than one alarm signal: Type C8.3 Fault signals from points9.5 Disablement of addressable points10 Test condition002-479-122 Language region 1, English manual002-479-222 Language region 2002-479-322 Language region 3, dual relay002-492-222 Language region 2, English manual, dual relay002-506-222 Language region 2, English manual002-479-142 Language region 1, English manual002-479-242 Language region 2002-479-342 Language region 3, dual relay002-492-242 Language region 2, English manual, dual relay002-506-242 Language region 2, English manual002-479-182 Language region 1, English manual002-479-282 Language region 2002-479-382 Language region 3, dual relay002-492-282 Language region 2, English user manual, dual relay002-506-282 Language region 2, English user manualIncorporating the following units:020-747 8-way relay kit020-772 4-way monitored sounder kitLPCB Ref.No.429c/06429c/10429c/11429c/1290 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsDXc1-SDXc2-MDXc4-MCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Output to automatic fire protection equipment: Type A7.10.3 Output to automatic fire protection equipment: Type C7.10.4 Fault monitoring of fire protection equipment7.11.1 Delays to outputs7.11.2 Manual or automatic switching of delays to outputs7.12.2 Dependency on more than one alarm signal: Type B8.9 Output to fault warning routing equipment10 Test conditionSingle loop control and indicating equipment714-001-111 PANEL DXc1-S SINGLE LOOP REGION 1 (UK & Iceland)714-001-112 PANEL DXc1-S SINGLE LOOP REGION 2 (Iberia, India & ME)714-001-113 PANEL DXc1-S SINGLE LOOP REGION 3(Dutch, French, Italian, Slovenian)Incorporating as modular units:124-410-001 Base PCB 1 Loop124-411 Display PCB010-115 PSU RS-50-24Two loop control and indicating equipment714-001-221 PANEL DXc2-M TWO LOOP REGION 1 (UK & Iceland)714-001-222 PANEL DXc2-M TWO LOOP REGION 2 (Iberia, India & ME)714-001-223 PANEL DXc2-M TWO LOOP REGION 3(Dutch, French, Italian, Slovenian)Incorporating as modular units:124-410 Base PCB 2 Loop124-411 Display PCB010-116 PSU RS-100-24Four loop control and indicating equipment714-001-241 PANEL DXc4-M FOUR LOOP REGION 1 (UK & Iceland)714-001-242 PANEL DXc4-M FOUR LOOP REGION 2 (Iberia, India & ME)714-001-243 PANEL DXc4-M FOUR LOOP REGION 3(Dutch, French, Italian, Slovenian)Incorporating as modular units:124-410 Base PCB 2 Loop124-411 Display PCB124-417 2 Loop PCB010-116 PSU RS-100-24Incorporating as optional modular units:795-099 KIT DXc NETWORK CARD795-102 KIT DXc 40 ZONE LED CARD795-103 KIT DXc 80 ZONE LED CARD WITH COVER795-111 KIT DXc 2 LOOP EXPANSION CARD (Applicable to the two loopCIE only)795-117 KIT DXc PERFORMANCE CARD795-118 KIT DXc KEYSWITCH795-122 KIT DXc RS232795-123 KIT DXc RS485795-124 KIT DXc 80 ZONE LED CARDCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.11 Delays to outputs7.12.3 Dependencies on more than one alarm signal-Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each addressable point10 Test conditionLPCB Ref.No.429c/13429c/14429c/15DXc1-MNotes:1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.Single loop and indicating equipment714-001-111 PANEL DXc1-S SINGLE LOOP REGION 1 (UK &Iceland)429c/1618 Jan 2014 91

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products714-001-112 PANEL DXc1-S SINGLE LOOP REGION 2(Iberia, India & ME)714-001-113 PANEL DXc1-S SINGLE LOOP REGION 3(Dutch, French, Italian, Slovenian)714-001-114 PANEL DXc1-S SINGLE LOOP REGION 4(German)LPCB Ref.No.Incorporating as modular units:124-410-001 Base PCB 1 Loop124-411 Display PCB010-115 PSU RS-50-24Multron Systems Pte Ltd217 Kallang Bahru, Multron Building, Singapore 339 347, SingaporeTel: +65 6743 2555 / 6395 6868 • Fax: +65 6743 2777 / 6395 6869E-mail: info@multron.com • Website: www.multron.comCertificate No: 548j-(cl-6) to EN 54-2: 1997 & EN 54-4: 1997Certificate No: 548p-(cl-3) to EN 54-2: 1997 + A1: 2006 & EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsMPC-101MPC-102MPC-104MPC-108MPC-116IFP2Single zone conventional control and indicating equipmentCertified with the following options with requirements from EN 54 part 2:7.8 Output to Fire Alarm Devices10 Test conditionTwo zone conventional control and indicating equipmentCertified with the following options with requirements from EN 54 part 2:7.8 Output to Fire Alarm Devices10 Test conditionFour zone conventional control and indicating equipmentCertified with the following options with requirements from EN 54 part 2:7.8 Output to Fire Alarm Devices10 Test conditionEight zone conventional control and indicating equipmentCertified with the following options with requirements from EN 54 part 2:7.8 Output to Fire Alarm Devices10 Test conditionSixteen zone conventional control and indicating equipmentCertified with the following options with requirements from EN 54 part 2:7.8 Output to Fire Alarm Devices10 Test conditionIntelligent 2 loop, 30 zone analogue addressablecontrol and indicating equipmentIncorporating the following units:MB-220/ F7.820.826 Main boardSB-220/ F7.820.827 Switch boardTB-220/ F7.820.828 Loop interface boardPS-220/ F7.820.829b Power supply unitZP-220/ F7.908.312d Zone indication and intervention boardLC200/ F7.820.1125 Loop boardIncorporating as optional modular units:P-9930/ F7.820.170 RS-232 board for configurationP-9901 Printer module kitLPCB Ref.No.548j/02548j/03548j/04548j/05548j/06548p/0192 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsIFP8Certified with the following options with requirements from EN 54 part 2:7.8 Output to Fire Alarm Devices7.10.1 Output to automatic Fire Protection Equipment Type A7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of addressable pointsIntelligent 8 loop, 140 zone analogue addressablecontrol and indicating equipmentIncorporating the following units:SB-800/ F7.820.1238 Indication boardLCIFP8/ F7.820.1239 Loop boardPB-800/ F7.820.1311 Power boardZP-800/ F7.820.1312 ZCP boardKB-800/ F7.820.1326 Keypad boardMB-800/ F7.820.1237 Main boardMO-800/ F7.820.1310 Mother boardIncorporating as optional modular units:P-9935/ F7.820.1313 USB communication boardOptional language variants:10104673 Portuguese language variant10104675 Hungarian language variantCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire routing equipment7.9.2 Alarm confirmation input from fire routing equipment7.10.1 Output type A7.10.2 Output type B7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionLPCB Ref.No.548p/02Nitin Ventures FZEP.O. Box 262294, Jebel Ali Free Zone, Dubai, United Arab EmiratesTel: +97 148865858/859 • Fax: +97 148865800E-mail: sales@nitinventures.com • Website: www.nitinfire.comCertificate No: 018c to EN 54-2: 1997 and EN 54-4: 1997Certificated ProductsDiscoveryNV 24 loop analogue addressable control and indicating equipmentIncorporating as modular units:A1579 MotherboardA1580 Display boardA1585 Loop cardsA1584 230Vac power supply control cardA1599 Printer boardCertified with the following options with requirements from EN54-2: 19977.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of addressable points10 Test condition2 zone conventional control and indicating equipmentIncorporating as modular units:C1627 Mother boardLPCB Ref.No.018c/01018c/0218 Jan 2014 93

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsNV 4NV 8NV 16NV 32NV 8RNV 16RNV 32RC1628 Display boardC1631 Repeater interface (option)Certified with the following options with requirements from EN54-2: 19977.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition4 zone conventional control and indicating equipmentIncorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface (option)Certified with the following options with requirements from EN54-2: 1997:7.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition8 zone conventional control and indicating equipmentIncorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface (option)Certified with the following options with requirements from EN54-2: 1997:7.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition16 zone conventional control and indicating equipmentIncorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface (option)Certified with the following options with requirements from EN54-2: 1997:7.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition32 zone conventional control and indicating equipmentIncorporating as modular units:C1627 Mother boardC1629 Display boardC1632 16 Zone expansion boardC1652 5A Power supply boardC1631 Repeater interface (option)Certified with the following options with requirements from EN54-2: 1997:7.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition8 zone conventional repeater unitIncorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface16 zone conventional repeater unitIncorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface32 zone conventional repeater unitIncorporating as modular units:C1627 Mother boardLPCB Ref.No.018c/03018c/04018c/05018c/06018c/R01018c/R02018c/R0394 18 Jan 2014

Certificated ProductsC1628 Display boardC1631 Repeater interfacePART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTLPCB Ref.No.Notifier by Honeywell (Pittway Systems Technology Group (Europe) Ltd)Charles Avenue, Burgess Hill, West Sussex RH15 9UF, United KingdomTel: +44 (0)1444 230300 • Fax: +44 (0)1444 230888E-mail: sales@notifiersystems.co.uk • Website: www.notifierfiresystems.co.ukCertificate No: 154g to EN 54-2: 1997 + A1: 2006, EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsID3000ID3002ID3004ID3006ID3008Basic Equipment Kit, (BEK): Modular analogue addressable control and indicatingequipment.020-538 Basic Equipment Kit ID3000, Group 0020-538-001 ID3000 Basic Equipment Kit, Group 1020-538-003 ID3000 Basic Equipment Kit, Group 3020-538-004 ID3000 Basic Equipment Kit, Group 4020-538-005 ID3000 Basic Equipment Kit, Group 5Fixed build 2 loop analogue addressable control and indicating equipment.002-473 ID3002, 2 Loop, PSU3A, Group 0, Red002-474 ID3002, 2 Loop, PSU3A, Group 0002-474-001 ID3002, 2 Loop, PSU3A, Group 1002-474-003 ID3002, 2 Loop, PSU3A, Group 3002-474-004 ID3002, 2 Loop, PSU3A, Group 4002-474-005 ID3002, 2 Loop, PSU3A, Group 5Fixed build 4 loop analogue addressable control and indicating equipment.020-727 ID3004, 4 Loop, PSU7A, Group 0, LIB020-728 ID3004, 4 Loop, PSU7A, Group 0, ELIB020-729 ID3004, 4 Loop, PSU7A, Group 0, LIB, printer020-730 ID3004, 4 Loop, PSU7A, Group 0, LIB, 64 zone LEDFixed build 6 loop analogue addressable control and indicating equipment.020-731 ID3006, 6 Loop, PSU7A, Group 0, 2xLIB020-732 ID3006, 6 Loop, PSU7A, Group 0, 2xELIB020-733 ID3006, 6 Loop, PSU7A, Group 0, 2xLIB, printer020-734 ID3006, 6 Loop, PSU7A, Group 0, 2xLIB, 64 zone LEDFixed build 8 loop analogue addressable control and indicating equipment.020-735 ID3008, 8 Loop, PSU7A, Group 0, 3xLIB, 78Ah Battery Enclosure020-736 ID3008, 8 Loop, PSU7A, Group 0, 3xELIB, 78Ah Battery Enclosure020-737 ID3008, 8 Loop, PSU7A, Group 0, 3xLIB, 78Ah Battery Enclosure, Printer020-738 ID3008, 8 Loop, PSU7A, Group 0, 3xLIB, 78Ah Battery enclosure, printer, 64Zone LEDID3000 seriesIncorporating the following as modular units:Enclosures:020-472-009 Backbox Kit Standard, Black / Grey020-473-009 Backbox Kit Extended, Black / Grey020-474-009 Backbox Kit Extended Deep, Black / Grey020-475-009 Backbox Kit Double Extended, Black / Grey020-476-009 Backbox Kit Double Extended Deep, Black / Grey020-480-009 Cover Kit Main Moulded, Black / Grey020-481-009 Cover Kit Extended Moulded, Black / Grey020-508-009 Backbox Extension Standard Assembly Black / Grey020-509-009 Backbox Extension Deep Assembly Black / Grey020-513-009 High Security Cover Kit Main, Black / Grey020-514-009 High Security Cover Kit Extension020-576 Main Cover, Stainless Steel020-577 Extension Cover Stainless Steel020-621-256 Zone Extension Cover, Stainless / Steel020-621-009 256 Zone Extension Cover, Black / Grey020-541-009 PSU7A / 78Ah Battery EnclosureLPCB Ref.No.154g/01154g/01154g/01154g/01154g/0118 Jan 2014 95

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsModules:020-559-001 Zone Extension Chassis Kit 1-64 Zone C/W Display Module020-559-002 Zone Extension Chassis Kit 65-128 Zone C/W Display Module020-612 Double Extended Chassis Kit 256 Zone020-708-009 Extension Chassis with Printer020-644-009 Printer Assembly020-588 Notifier Dual Loop Interface Board, (LIB)020-549 Notifier Dual Enhanced Loop Interface Board, (ELIB)020-478 RS232 Interface020-479 RS485 Interface020-648 PSU3A020-579 PSU7A, (Requires Dual Transmission Path / Booster, PSU Interface)020-548 PSU7A Status Indication020-543 Dual Transmission Path / Booster, PSU Interface020-773 Routing Termination Unit (DEOL)020-877 Extinguishing Interface Module M221-SI020-643 ID²net Fibre Optic Interface Kit020-647 ID²net Network Gateway Module, (NGM) for use in ID3000 PanelLPCB Ref.No.Note 1:Note 2:Products are available in language variants as follows:Group 0: English and Icelandic, with English manualsGroup 1: English, Spanish, Portuguese, Icelandic and ItalianGroup 3: English, Swedish, Danish, Norwegian and FinishGroup 4: English and PolishGroup 5: English and CyrillicFixed build products incorporate a corresponding Basic Equipment Kit.ID50ID60ID61ID62Single loop analogue addressable control and indicating equipment002-455 ID50 Panel Group 0002-455-001 ID50 Panel Group 1002-455-003 ID50 Panel Group 3002-455-004 ID50 Panel Group 4May also incorporate the following optional modular unit:002-553 RS485 Communication KitSingle loop analogue addressable control and indicating equipment002-456 ID60 Panel Group 0002-456-001 ID60 Panel Group 1002-456-003 ID60 Panel Group 3002-456-004 ID60 Panel Group 4May also incorporate the following optional modular unit:002-553 RS485 Communication KitSingle loop analogue addressable control and indicating equipment002-463 ID61 Panel Group 0002-463-001 ID61 Panel Group 1002-463-004 ID61 Panel Group 4002-485-001 ID61 Panel Group 1 (Red)Incorporating the following modular unit:020-648 PSU3A KitMay also incorporate the following optional modular units:020-479 RS485 Communication Kit020-644-009 Printer KitSingle loop analogue addressable control and indicating equipment002-461 ID62 Panel Group 0002-461-001 ID62 Panel Group 1002-461-004 ID62 Panel Group 4Incorporating the following modular unit:020-648 PSU3A KitMay also incorporate the following optional modular units:020-479 RS485 Communication Kit020-644-009 Printer KitCertified with the following options with requirements:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment: Type A7.10.3 Outputs to fire protection equipment: Type C7.10.4 Fault monitoring of fire protection equipment7.11 Delays to Outputs154g/02154g/03154g/04154g/0596 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products7.12.2 Dependencies on more than one alarm signal: Type B7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionLPCB Ref.No.Note: Products are available in various language groups as follows:Group 0: English, Icelandic, French, Italian, Portuguese and Spanish, (shipped withEnglish manuals)Group 1: English, Icelandic, French, Italian, Portuguese and SpanishGroup 2: English, Dutch, German, French and ItalianGroup 3: English, Swedish, Danish, Norwegian and FinnishGroup 4: English and PolishNFS2-8 2 Zone 002-477-122 Language region 1, light grey002-477-129 Language region 1, black & grey002-477-222 Language region 2, light grey002-477-229 Language region 2, black & grey002-477-322 Language region 3, light grey, dual relay002-477-329 Language region 3, black & grey, dual relay, English manual002-490-129 Language region 1, black & grey, dual relay, English manual002-490-229 Language region 2, black & grey, dual relay, English manual002-490-222 Language region 2, light grey, English manuaNFS2-8 4 Zone 002-477-142 Language region 1, light grey002-477-149 Language region 1, black & grey002-477-242 Language region 2, light grey002-477-249 Language region 2, black & grey002-477-342 Language region 3, light grey, dual relay002-477-349 Language region 3, black & grey, dual relay002-490-149 Language region 1, black & grey, dual relay, English manual002-490-249 Language region 2, black & grey, dual relay, English manual002-490-242 Language region 2, light grey, English manualNFS2-8 8 Zone 002-477-182 Language region 1, light grey002-477-189 Language region 1, black & grey002-477-282 Language region 2, light grey002-477-289 Language region 2, black & grey002-477-382 Language region 3, light grey, dual relay002-477-389 Language region 3, black & grey, dual relay002-490-189 Language region 1, black & grey, dual relay, English manual002-490-289 Language region 2, black & grey, dual relay, English manual002-490-282 Language region 2, light grey, English manual154g/06154g/07154g/08ID2000ID2002Incorporating the following units:020-747 8-Way relay kit020-772 4-way monitored sounder kitCertified with the following options from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Output to automatic fire protection equipment: Type A7.10.3 Output to automatic fire protection equipment: Type C7.10.4 Fault monitoring of fire protection equipment7.11.1 Delays to outputs7.11.2 Manual or automatic switching of delays to outputs7.12.2 Dependency on more than one alarm signal: Type B8.9 Output to fault warning routing equipment10 Test conditionBasic Equipment Kit, (BEK): Modular analogue addressable controland indicating equipment.020-628 Basic equipment kit ID2000 Group 0,020-628-001Basic equipment kit ID2000 Group 1, UK ES PT IT020-628-002Basic equipment kit ID2000 Group 2, UK NL FRFixed build 2 loop analogue addressable control and indicatingequipment.002-459 ID2002, 2 loop control and indicating equipment, Group 1Incorporating the following as optional modular units:Enclosures:154g/09154g/0918 Jan 2014 97

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsPearl020-472-009 Backbox Kit Standard, Black / Grey020-473-009 Backbox Kit Extended, Black / Grey020-474-009 Backbox Kit Extended Deep, Black / Grey020-475-009 Backbox Kit Double Extended, Black / Grey020-476-009 Backbox Kit Double Extended Deep, Black / Grey020-480-009 Cover Kit Main Moulded, Black / Grey020-481-009 Cover Kit Extended Moulded, Black / Grey020-508-009 Backbox Extension Standard Assembly Black / Grey020-509-009 Backbox Extension Deep Assembly Black / Grey020-576 Main Cover, Stainless Steel020-577 Extension Cover Stainless Steel020-541-009 PSU7A / 78Ah Battery EnclosureModules:020-649-009 64 Zone Extension Chassis Kit 64 Zone C/W Display Module020-708-009 Extension Chassis with Printer020-644-009 Printer Assembly020-588 Notifier Dual Loop Interface Board, (LIB)020-478 RS232 Interface020-479 RS485 Interface020-648 PSU3APSU7A, (Requires Dual Transmission Path / Booster, PSUInterface)020-543 Dual Transmission Path / Booster, PSU Interface020-548 PSU7A Status IndicationCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.11 Delays to outputs7.12.3 Dependency on more than one alarm signal type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablements of addressable points10 Test conditionNote: Products are available in language variants as follows:Group 0: English, Spanish, Portuguese and Italian (shipped withEnglish manuals)Group 1: English, Spanish, Portuguese and ItalianGroup 2: English, Dutch, and FrenchTwo loop analogue addressable control and indicating equipmentIncorporating the following units:124-408 3A PSU board124-412 Network gateway module124-421 Base board incorporating two loops124-422 Display board124-423 VdS I/O Module124-426 Communications modulePRL Box Extended Back boxIncorporating the following optional regional language text inserts:PRL-EN ( English)PRL-D (German)PRL-IB (Iberia)PRL-BNL (Benelux)PRL-NRD (Swedish)PRL-MEA (Middle East and Africa)PRL-IT (Italian)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Output to fire protection equipment type A7.10.3 Output to fire protection equipment type C7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.2 Dependency on more than one alarm signal type BLPCB Ref.No.154g/1098 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products7.12.3 Dependency on more than one alarm signal type C7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablements of addressable points10 Test conditionNotes:1. 1. This product approval does not constitute compliance with the fire detectionand alarm systems requirementsof EN 54-13.2. Scope of approval does not include the operation of the networkfunctionality.LPCB Ref.No.002-467 ID 2 net Network Gateway Unit, (NGU) Notifier Protocol154g/NO1Incorporating the following as modular units:020-643 ID 2 net Fibre Optic Interface Kit020-647 ID 2 net Network Gateway Module, (NGM) for use in ID3000 Panels020-648 PSU3ACertified with the following options with requirements:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Output to fire protection equipment type A7.10.3 Output to fire protection equipment type C7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.2 Dependency on more than one alarm signal type B7.12.3 Dependency on more than one alarm signal type C7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablements of addressable points10 Test conditionOlympia Electronics S.A.Kolindros Pierias, 60061, GreeceTel: (+30) 2353051200 • Fax: (+30 )2353051486E-mail: info@olympia-electronics.gr • Website: www.olympia-electronics.grCertificate No: 1010a to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2 006Certificated ProductsBSR-2104Two loop analogue addressable control and indicating equipment.Incorporating the following units:1702091 Main board0905073 Main processor board0506073 Input / Output Unit1603073 LED PCB board2307103 Loop 1 incorporating power control boardDPP100-24 Lambda PSU blockLPCB Ref.No.1010a/01Certified with the following options with requirements from EN 54 part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.10.1 Output to fire protection equipment (Type A)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.13 Alarm counter8.3 Fault signal from points8.9 Output to fault warning routing equipment9.5 Disablement of each address point18 Jan 2014 99

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsBSR-211410 Test conditionFour loop analogue addressable control and indicating equipment.Incorporating the following units:1702091 Main board0905073 Main processor board0506073 Input / Output Unit1603073 LED PCB board2307103 Loop 1 incorporating power control board2607103 Loop 2 boardDPP100-24 Lambda PSU blockLPCB Ref.No.1010a/02Certified with the following options with requirements from EN 54 part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.10.1 Output to fire protection equipment (Type A)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.13 Alarm counter8.3 Fault signal from points8.9 Output to fault warning routing equipment9.5 Disablement of each address point10 Test conditionOrient Corporation Pte. Ltd.Block 3018, Bedok North Street 5, #05-51, Eastlink Light Industrial Building 486132, SingaporeTel: (+65) 6242 5489 • Fax: (+65) 6241 2291E-mail: corporate@orientcorp.netCertificate No: 176c-(cl-1) to EN 12094-1: 2003, EN54-2: 1997 + A1: 2006 + A2: 2007 and EN 54-4: 1997 + A1: 2002 + A2: 2006Control and indicating equipmentCertificated ProductsEP203/ORIENTConventional three zone class A extinguisher control panelLPCB Ref.No.176c/01Incorporating the following units:SPF0000203 Main extinguisher controlSPF0000212 External relay interfaceSPF0003613 Power supply unitSPF0000214 EP214 terminatorIncorporating as modular units:EP210S Remote Status Unit Surface Mount optional (See Note 1)EP211 Economy Status Unit optional (See Note 1)Certified with the following options with requirements from EN 12094-1:20034.17 Delay of extinguishing signal4.18 Signal representing the flow of extinguishing agent4.19 Monitoring of the status of components4.20 Emergency hold device4.21 Control of flooding time4.23 Manual only mode4.26 Triggering of equipment outside the system4.27 Emergency abort device4.30 Activation of alarm devices with different signalsCertified with the following options with requirements from EN 54-2:19977.8 Output to fire alarm device(s)7.11 Delays to the auctioning of outputs fire alarm devices and firerouting equipment100 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products7.13 Alarm counter10 Test conditionNote:1. Optional Remote Status Unit part No. EP210S & Economy Status Unit part No.EP211are not certified as meeting the requirements of the standards specified.2. Meets the requirements of EN12094-3:2003, Class A - i.e. operational temperaturerange of -5°C to +40°C.LPCB Ref.No.Pelco Finland OySokerilinnantie 11C, 02600, Espoo, FinlandTel: +358 10 446 511 • Fax: +358 10 446 5103E-mail: info.fi@pelco.com • Website: www.pelco.com/nordicManufactured at:Pelco Finland Oy, Manttaalitie 5-7, 01530 Vantaa, FinlandCertificate No: 883b to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsFX8 Loop Analogue addressable CIEBasic unit incorporates the following modules:FX-MC2 Master controllerFX-UI2 User interfaceFX-PSB 4.5 A Power SupplyorFX-PSA 2.2 A Power SupplyOptional Modules -The following modules are optional additions to the basic unit:FX-ALCB Two loop addressable controller - Apollo protocol cardFX-ALCA One loop addressable controller - Apollo protocol cardFX-LC Two loop addressable controller - System Sensor protocol cardFX-SLC Two loop addressable controller - System Sensor advanced protocol cardFX-CLC Sixteen loop conventional ControllerFX-IOC I/O controller boardFX-OCA 16 clean output moduleFX-LB80 80 Zone LED indication cardFX2-LB32 32 Panel LED indication cardFX-BAT Separate battery box (4x17Ah, 12V)FXM-BAT Separate battery box (4x12Ah, 12V)Certified with the following options with requirements from EN 54-2:7.8 Outputs to fire alarm devices7.9.1 Output to fire alarm routing equipment7.10.3 Output to Fire Protection Equipment (Output Type C)7.11 Delays to outputs7.12.2 Dependencies on more than one alarm signal (Type B)7.13 Alarm counter8.3 Fault signals from points8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionNotes:1. Scope of approval does not include the operation of the network functionality.2. This product approval does not constitute compliance with the fire detection andLPCB Ref.No.883b/0118 Jan 2014 101

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsFXLFXMalarm systems requirements of EN 54-13.8 Loop Analogue addressable CIEBasic unit incorporates the following modules:FX-MC2 Master controllerFX-UI2 User interfaceFX-PSB 4.5 A Power SupplyorFX-PSA 2.2 A Power SupplyOptional Modules -The following modules are optional additions to the basic unit:FX-ALCB Two loop addressable controller - Apollo protocol cardFX-ALCA One loop addressable controller - Apollo protocol cardFX-LC Two loop addressable controller - System Sensor protocol cardFX-SLC Two loop addressable controller - System Sensor advanced protocol cardFX-CLC Sixteen loop conventional ControllerFX-IOC I/O controller boardFX-OCA 16 clean output moduleFX-LB80 80 Zone LED indication cardFX2-LB32 32 Panel LED indication cardFX-BAT Separate battery box (4x17Ah, 12V)FXM-BAT Separate battery box (4x12Ah, 12V)Certified with the following options with requirements from EN 54-2:7.8 Outputs to fire alarm devices7.9.1 Output to fire alarm routing equipment7.10.3 Output to Fire Protection Equipment (Output Type C)7.11 Delays to outputs7.12.2 Dependencies on more than one alarm signal (Type B)7.13 Alarm counter8.3 Fault signals from points8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionNotes:1. Scope of approval does not include the operation of the network functionality.2. This product approval does not constitute compliance with the fire detection andalarm systems requirements of EN 54-13.4 Loop Analogue addressable CIEBasic unit incorporates the following modules:FX-MC2 Master ControllerFX-UI2 User InterfaceFX-PSB 4.5 A Power SupplyorFX-PSA 2.2 A Power SupplyOptional Modules -The following modules are optional additions to the basic unit:FX-ALCB Two loop addressable controller - Apollo protocol cardFX-ALCA One loop addressable controller - Apollo protocol cardFX-LC Two loop addressable controller - System sensor protocol cardFX-SLC Two loop addressable controller - System Sensor advanced protocol cardFX-CLC Sixteen loop conventional ControllerFX-IOC I/O controller boardFX-OCA 16 clean output moduleFX-LB80 80 Zone LED indication cardFX2-LB32 32 Panel LED indication cardFX-BAT Separate battery box (4x17Ah, 12V)FXM-BAT Separate battery box (4x12Ah, 12V)Certified with the following options with requirements from EN 54-2:7.8 Outputs to fire alarm devices7.9.1 Output to fire alarm routing equipment7.10.3 Output to Fire Protection Equipment (Output Type C)LPCB Ref.No.883b/02883b/03102 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsFXS7.11 Delays to outputs7.12.2 Dependencies on more than one alarm signal (Type B)7.13 Alarm counter8.3 Fault signals from points8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionNotes:1. Scope of approval does not include the operation of the network functionality.2. This product approval does not constitute compliance with the fire detection andalarm systems requirements of EN 54-13.Analogue addressable Repeater PanelIncorporating the following modules:FX-MC2 Master ControllerFX-UI2 User InterfaceOptional Modules -The following modules are optional additions to the basic unit:FX-IOC I/O ControllerLPCB Ref.No.883b/R01Photain Controls8 New Market Court, Chippenham Drive, Kingston, Milton Keynes MK10 0AQ, United KingdomTel: 01908 281981 • Fax: 01908 282554E-mail: John.davies@fs.utc.comCertificate No: 092h to BS EN 54 - 2: 1998 and BS EN 54- 4: 1998 N.B. This certificate is to a withdrawn standard. Control andindicating equipment conforming to this standard is not suitable for use within the jurisdiction of the European Union (EU). Thiscertificate, to the withdrawn standard, is maintained because controland indicating equipment meeting the withdrawn standardis still requested by some regulators outside of the EUCertificated ProductsSystem 2000 PAISystem 2000 PAIIncorporating as modular units:ZP3-MB2-4L 4 Loop Main boardZP3-MB2-2L 2 Loop Main boardZP3-MB2-1L 1 Loop Main boardZP3-CPU1 CPU boardZP3-DB1 Display boardZP3-ZB50 50 Zone LED boardZP3-CB1 Commissioning key switch boardZP3-PR1 Printer KitZP3AB-SCB-D Control bus driverZP3AB-RL8 Programmable relay output board, 8 wayZP3-AB-MA8 Programmable monitored output board, 8 wayZP3AB-OP24 Programmable transistor output board, 24 wayZP3AB-MIP8 Programmable input board, 8 wayZP3-Xl 230Vac Power supply unitApproved with the following options from BS EN54 Part 2:7.8 Output to fire alarm devices7.9 Output to fire alarm routing equipment7.10 Output to fire protection equipment7.11 Delays to outputs7.12 Co-incidence detection7.13 Alarm counter8.3 Fault signals from points8.4 Total loss of power8.9 Output to fault routing equipmentLPCB Ref.No.092h/0118 Jan 2014 103

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products9.5 Disablement of addressable points10 Test condition11 Standardised input/output interfaceLPCB Ref.No.Protec Fire Detection plcProtec House, Churchill Way, Nelson, Lancashire BB9 6RT, United KingdomTel: +44 (0)1282 717171 • Fax: +44 (0)1282 717273E-mail: sales@protec.co.uk • Website: www.protec.co.ukCertificate No: 201ad to EN 54-2: 1997+A1: 2006 and EN 54-4: 1997+A1: 2002+A2: 2006Certificated Products6304 4 Loop Analogue addressable control and indicating equipmentIncorporating the following units:LPCB Ref.No.201ad/096400/DCNSF41-860-52F Main BoardSF41-850-50C Terminal BoardSF40-877-65 CP250 Printer Board31-100-22 Backbox31-243-36 Inner Plate62-407-57 Door04-701-38 Printer MechanismSF40-465-43F Series 9000 Power Supply UnitSF41-913-56B SMT Dual 6000 Loop Card31-275-44 Optional external 24 AH battery boxSF40-879-67G Network CardCertified with the following options with requirements from EN 54: Part 2:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.11 Delays to outputs7.12.3 Dependencies on more than one alarm signal Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNote:1. Scope of approval does not include the operation of the network functionality.Display and Control nodeIncorporating the following units:SF40-855-65E Display control unitSF40-811-47E Local display unitSF40-821-49E PF Terminal unitCertified with the following options with requirements from EN 54: Part 2:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.11 Delays to outputs7.12.3 Dependencies on more than one alarm signal - Type C7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of each address point10 Test conditionNotes:1. This unit does not meet the requirements of EN 54-2 & 4as a stand alone unit. It is intended for use as part of the 6400distributed network fire alarm system. In order to meet therequirements of201ad/01104 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products6400/2LPN6400/4LPN6400/DCN/2LPNEN 54-2 & 4 the unit must be used in conjunction with thefollowing units: 6400/2LPN 2 Loop processing node and/or 6400/4LPN 4 Loopprocessing node 6400/PSU 8A Power supply with charger2. Scope of approval does not include the operation of the network functionality.2 Loop processing nodeIncorporating the following units:SF40-812-48E SSUSF40-814-50E Local IOSF40-817-53C Terminal boardSF40-819-55D 6400 Loop terminal boardSF40-818-54 LPN display boardSF40-826-54C 6400 OPTO isolated 485 boardSF40-913-56B 6400 Loop Transmission boardNotes:1. This unit does not meet the requirements of EN 54-2& 4 as a stand alone unit. It is intended for use aspart of the 6400 distributed network fire alarmsystem. In order to meet the requirements of EN 54-2 & 4 the unit must be used in conjunction with thefollowing units: 6400/DCN Display and Control node 6400/PSU 8A Power supply with charger2. Scope of approval does not include the operation of the network functionality.4 Loop processing nodeIncorporating the following units:SF40-812-48E SSUSF40-814-50E Local IOSF40-817-53C 5400 Terminal boardSF40-819-55D 6400 Loop terminal boardSF40-818-54 LPN display boardSF40-826-54C 6400 OPTO 485 boardSF40-913-56B 6400 Loop Transmission boardNotes:1. This unit does not meet the requirements of EN54-2 & 4 as a stand alone unit. It is intended foruse as part of the 6400 distributed network firealarm system. In order to meet the requirementsof EN 54-2 & 4 the unit must be used inconjunction with the following units: 6400/DCN Display and Control node 6400/PSU 8A Power supply with charger2. Scope of approval does not include the operation of the network functionality.Display and control node plus 2 Loop processing nodeIncorporating the following units:SF40-855-65E Display control unitSF40-811-47E 5400 LED display unitSF40-812-48E SSUSF40-814-50E Local IOSF40-817-53C 5400 Terminal boardSF40-819-55D 6400 Loop terminal boardSF40-826-54C 6400 OPTO isolated 485 boardSF40-913-56B 6400 Loop Transmission boardCertified with the following options with requirements from EN 54: Part 2:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.11 Delays to outputs7.12.3 Dependencies on more than one alarm signal - Type C7.13 Alarm counter8.3 Fault signals from pointsLPCB Ref.No.201ad/02201ad/03201ad/0418 Jan 2014 105

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products6400/DCN/4LPN6400/PSU8.9 Output to fault warning routing equipment9.5 Disablement of each address point10 Test conditionNotes:1. This unit does not meet the requirements of EN54-2 & 4 as a stand alone unit. It is intended foruse as part of the 6400 distributed network firealarm system. In order to meet the requirementsof EN 54-2 & 4 the unit must be used inconjunction with the following units: 6400/PSU 8A Power supply with charger2. Scope of approval does not include the operation of the network functionality.Display and control node plus 4 Loop processing nodeIncorporating the following units:SF40-855-65E Display control unitSF40-811-47E 5400 Local display unitSF40-812-48E SSUSF40-814-50E Local IOSF40-817-53C 5400 Terminal boardSF40-819-55D 6400 Loop terminal boardSF40-826-54C 6400 OPTO isolated 485 boardSF40-913-56B 6400 Loop Transmission boardCertified with the following options with requirements from EN 54: Part 2:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.11 Delays to outputs7.12.3 Dependencies on more than one alarm signal - Type C7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of each address point10 Test conditionNotes:1. This unit does not meet the requirements of EN54-2 & 4 as a stand alone unit. It is intended foruse as part of the 6400 distributed network firealarm system. In order to meet the requirementsof EN 54-2 & 4 the unit must be used inconjunction with the following units: 6400/PSU 8A Power supply with charger2. Scope of approval does not include the operation of the network functionality.8A Power supply with chargerIncorporating the following units:SF40-472-48H-3 8A Power supply with chargerNotes:1. This unit does not meet the requirements of EN54-2 & 4 as a stand alone unit. It is intended foruse as part of the 6400 distributed network firealarm system. In order to meet therequirements of EN 54-2 & 4 the unit must beused in conjunction with the following units: 6400/DCN Display and Control node 6400/2LPN 2 Loop processing node and/or 6400/4LPN 4 Loopprocessing node2. Scope of approval does not include the operation of the network functionality.3. Certified to EN 54-4 only.LPCB Ref.No.201ad/05201ad/066301 1 Loop Analogue addressable control and indicating equipment201ad/07Incorporating the following units:SF41-860-52F Main BoardSF41-850-50C Terminal Board106 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsSF40-877-65 CP250 Printer Board31-100-22 Backbox31-243-36 Inner Plate62-407-57 Door04-701-38 Printer MechanismSF40-465-43F Series 9000 Power Supply Unit31-275-44 Optional external 24 AH battery boxSF40-879-67G Network CardCertified with the following options with requirements from EN 54: Part 2:LPCB Ref.No.7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.11 Delays to outputs7.12.3 Dependencies on more than one alarm signal Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNote:1. Scope of approval does not include the operation of the network functionality.6302 2 Loop Analogue addressable control and indicating equipment201ad/08Incorporating the following units:SF41-860-52F Main BoardSF41-850-50C Terminal BoardSF40-877-65 CP250 Printer Board31-100-22 Backbox31-243-36 Inner Plate62-407-57 Door04-701-38 Printer MechanismSF40-465-43F Series 9000 Power Supply Unit31-275-44 Optional external 24 AH battery boxSF40-879-67G Network CardCertified with the following options with requirements from EN 54: Part 27.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.11 Delays to outputs7.12.3 Dependencies on more than one alarm signal Type C7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNote:1. Scope of approval does not include the operation of the network functionality.Schneider Electric Buildings Sweden ABDialoggatan 16, 126 37, Hägersten, NorwayTel: +4687752700 • Fax: +4687449802E-mail: info.se@schneider-electric.com • Website: www.schneider-electric.comCertificate No: 176b to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsCFP704-4/SCAN/SFour zone conventional control and indicating equipmentIncorporating the units:RPF0702005 Power supply PCBSPF0724853 4 Zone main control boardCertified with the following options with requirements from EN 54-2: 1997LPCB Ref.No.176b/1318 Jan 2014 107

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsLPCB Ref.No.7.8 Output to fire alarm devices(s)7.11 Delays to outputs10 Test conditionSchneider Electronic Buildings ASLuhrtoppen 2, N-1470, Lørenskog, NorwayE-mail: jan-tore.borgen@schneider-electric.com • Website: www.schneider-electric.noCertificate No: 176b to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsEPC4Four zone conventional control and indicating equipmentIncorporating the units:RPF0702005 Power supply PCBSPF0724853 4 Zone main control boardCertified with the following options with requirements from EN 54-2: 19977.8 Output to fire alarm devices(s)7.11 Delays to outputs10 Test conditionLPCB Ref.No.176b/13SHIELD FIRE, SAFETY AND SECURITY LTDRedburn House, 2a Tonbridge Road, Romford, Essex RM3 8QE, United KingdomTel: +44 207 712 1610 • Fax: +44 207 712 1578E-mail: shielduk@shieldglobal.com • Website: www.shieldglobal.comCertificate No: 548p-(cl-2) to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsP-A2MIntelligent 2 loop, 30 zone analogue addressable control and indicating equipmentLPCB Ref.No.548p/01P-A8MIncorporating the following units:MB-220/ F7.820.826 Main boardSB-220/ F7.820.827 Switch boardTB-220/ F7.820.828 Loop interface boardPS-220/ F7.820.829b Power supply unitZP-220/ F7.908.312d Zone indication and intervention boardLC200/ F7.820.1125 Loop boardIncorporating as optional modular units:P-9930/ F7.820.170 RS-232 board for configurationP-9901 Printer module kitCertified with the following options with requirements from EN 54 part 2:7.8 Output to Fire Alarm Devices7.10.1 Output to automatic Fire Protection Equipment Type A7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of addressable pointsIntelligent 8 loop, 140 zone analogue addressable control and indicating equipmentIncorporating the following units:SB-800/ F7.820.1238 Indication boardLCIFP8/ F7.820.1239 Loop board548p/02108 18 Jan 2014

Certificated ProductsPB-800/ F7.820.1311 Power boardZP-800/ F7.820.1312 ZCP boardKB-800/ F7.820.1326 Keypad boardMB-800/ F7.820.1237 Main boardMO-800/ F7.820.1310 Mother boardPART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTLPCB Ref.No.Incorporating as optional modular units:P-9935/ F7.820.1313 USB communication boardOptional language variants:10104673 Portuguese language variant10104675 Hungarian language variantCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire routing equipment7.9.2 Alarm confirmation input from fire routing equipment7.10.1 Output type A7.10.2 Output type B7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal - Type A7.12.2 Dependencies on more than one alarm signal - Type B7.13 Alarm counter8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionSiemens Switzerland Limited, Building Technologies DivisionInternational Headquarters, Gubelstrasse 22, CH-6301 Zug, SwitzerlandTel: +41 (0) 41 724 24 24 • Fax: +41 (0) 41 724 35 22Manufacturing at:Volketswil Factory, Industriestrasse 22, CH-8604 Volketswil, SwitzerlandTel: +41 1 922 6111 • Fax: +41 1 922 6450UK Sales:Fire Safety and Security LimitedTel: +44 (0)1734 783703 • Fax: +44 (0)1734 775750Certificate No: 126h-(cl1) to EN 54-2: 1997 and EN 54-4: 1997Certificate No: 126aw-(cl-1) to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006Certificate No: 126aw-(cl-2) to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsFC2020Control and indicating equipmentIncorporating as modular units:FCM2028 Operating unitFP2001-A1 70W Power supplyFCI2002-A1 Periphery board (2-Loop)FHA2002-A1 Rear housingand as optional modular units:FCM2029-A2 Operating unitFCM2027 PMI- & mainboardFCM2005-A2 Operating add-on moduleFCM2006-A2 Operating add-on module (2 LED indicator)FTO2001-A1 Event printerLPCB Ref.No.126aw/0118 Jan 2014 109

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsFCI2003-A1 Loop extension (FDnet)FTO2002-A1 24 LED indicator (internal)FN2001-A1 Networking module (See Note 1)FN2008-A1 Ethernet Switch (See Note 1)FCA2001-A1 Isolated RS232 moduleFCA2002-A1 Isolated RS485 moduleFCI2001-D1 Fire brigade periphery moduleFCM2003-C2 Operating unit (incl. FBA-Term.CH)FCM2003-N2 Operating unit (incl. EVAC-Term.NL)FTO2004-C1 PCB compl. FBA-Terminal (CH)FTO2007-N1 PCB compl. EVAC- module (NL)SV 24V-150W 150W Power supplyREDUX Redundancy moduleLPCB Ref.No.Certified with the following Options with requirements from EN 54-2:Note:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm Confirmation from fire alarm routing equipment7.10.1 Output to automatic fire protection equipment Type A7.10.2 Output to automatic fire protection equipment Type B7.10.3 Output to automatic fire protection equipment Type C7.10.4 Fault monitoring of automatic fire protection equipment7.11 Delays to outputs7.12.2 Coincidence detection type B (only for FDnet & MS9i linetechnology)7.12.3 Coincidence detection type C7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1) Scope of approval does not include the operation of the networkfunctionality.2) This approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.FC2030Control and indicating equipmentIncorporating as modular units:FCM2028 Operating unitSV24V-150W 150W Power supplyFCI2002-A1 Periphery board (2-Loop)FHA2003-A1 Rear housingFCA2007-A1 Card cage (2 slot)and as optional modular units:FCM2029-A2 Operating unitFCM2027 PMI- & mainboardFCM2007-A2 Operating add-on module (4 LED ind.)FCM2015-D1 Operating add-on (DA ind.)FTO2001-A1 Event printerFCI2003-A1 Loop extension (FDnet)FTO2002-A1 24 LED indicator (internal)FN2001-A1 Networking module (See Note 1)FN2008-A1 Ethernet Switch (See Note 1)FCA2001-A1 Isolated RS232 moduleFCA2002-A1 Isolated RS485 moduleFCI2001-D1 Fire brigade periphery moduleFTO2003-D1 Emergency alarm indicatorFCA2006-A1 Connection mod. (Card Cage)FCI2008-A1 I/O card (programmable)FCL2001-A1 Line card (FDnet)FCL2002-A1 Line card (collective)FCL2003-A1 Line card (MS9i)REDUX Redundancy module126aw/02110 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsLPCB Ref.No.Certified with the following Options with requirements from EN 54-2:Note:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm Confirmation from fire alarm routing equipment7.10.1 Output to automatic fire protection equipment Type A7.10.2 Output to automatic fire protection equipment Type B7.10.3 Output to automatic fire protection equipment Type C7.10.4 Fault monitoring of automatic fire protection equipment7.11 Delays to outputs7.12.1 Coincidence detection type A (only for MS9i & collective linetechnology)7.12.2 Coincidence detection type B (only for FDnet & MS9i linetechnology)7.12.3 Coincidence detection type C7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1) Scope of approval does not include the operation of the networkfunctionality.2) This approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.FC2040Control and indicating equipmentIncorporating as modular units;FCM2028 Operating unitFCM2007-A2 Operating add-on (4 LED ind.)SV24V-150W 150W Power supplyFCI2004-A1 Periphery board (4-Loop)FHA2003-A1 Rear housingand as optional modular units:FCM2029-A2 Operating unitFCM2027 PMI- & mainboardFCM2005-A2 Operating add-on moduleFCM2006-A2 Operating add-on module (2 LED indicator)FTO2001-A1 Event printerFCI2003-A1 Loop extension (FDnet)FTO2002-A1 24 LED indicator (internal)FN2001-A1 Networking module (See Note 1)FN2008-A1 Ethernet Switch (See Note 1)FCA2001-A1 Isolated RS232 moduleFCA2002-A1 Isolated RS485 moduleFCI2001-D1 Fire brigade periphery moduleFCM2003-C2 Operating unit (incl. FBA-Term.CH)FCM2003-N2 Operating unit (incl. EVAC-Term.NL)FTO2004-C1 PCB compl. FBA-Terminal (CH)FTO2007-N1 PCB compl. EVAC- module (NL)REDUX Redundancy module126aw/03Certified with the following Options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm Confirmation from fire alarm routing equipment7.10.1 Output to automatic fire protection equipment Type A7.10.2 Output to automatic fire protection equipment Type B7.10.3 Output to automatic fire protection equipment Type C7.10.4 Fault monitoring of automatic fire protection equipment7.11 Delays to outputs7.12.2 Coincidence detection type B (only for FDnet & MS9i linetechnology)18 Jan 2014 111

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsNote:7.12.3 Coincidence detection type C7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1) Scope of approval does not include the operation of the networkfunctionality.2) This approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.LPCB Ref.No.FC2060Control and indicating equipmentIncorporating as modular units:FCM2028 Operating unitSV24V-150W 150W Power supplyFCI2004-A1 Periphery board (4-Loop)FHA2005-A1 Rear housingFCA2008-A1 Card cage (5 slot)and as optional modular units:FCM2029-A2 Operating unitFCM2027 PMI- & mainboardFCM2007-A2 Operating add-on module (4 LED ind.)FCM2015-D1 Operating add-on (DA ind.)FTO2001-A1 Event printerFCI2003-A1 Loop extension (FDnet)FTO2002-A1 24 LED indicator (internal)FN2001-A1 Networking module (See Note 1)FN2008-A1 Ethernet Switch (See Note 1)FCA2001-A1 Isolated RS232 moduleFCA2002-A1 Isolated RS485 moduleFCI2001-D1 Fire brigade periphery moduleFTO2003-D1 Emergency alarm indicatorFCA2006-A1 Connection mod. (Card Cage)FCI2008-A1 I/O card (programmable)FCL2001-A1 Line card (FDnet)FCL2002-A1 Line card (collective)FCL2003-A1 Line card (MS9i)REDUX Redundancy module126aw/04Certified with the following Options with requirements from EN 54-2:Note:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm Confirmation from fire alarm routing equipment7.10.1 Output to automatic fire protection equipment Type A7.10.2 Output to automatic fire protection equipment Type B7.10.3 Output to automatic fire protection equipment Type C7.10.4 Fault monitoring of automatic fire protection equipment7.11 Delays to outputs7.12.1 Coincidence detection type A (only for MS9i & collective linetechnology)7.12.2 Coincidence detection type B (only for FDnet & MS9i linetechnology)7.12.3 Coincidence detection type C7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1) Scope of approval does not include the operation of the networkfunctionality.2) This approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.FC721 Control and indicating equipment 126aw/05112 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsLPCB Ref.No.Incorporating as modular units:FCM7204-Z3 Operating unitFP2001-A1 70W Power supplyFCI2010-A1 Periphery board (1-Loop)FHA2002-A1 Rear housingand as optional modular units:FCM7205-Y3 Operating unit (+ LED Ind.)FCM7203-H3 Operating unit (+ EVAC-Term.)FCM2027 PMI- & mainboardFTO2001-A1 Event printerFTO2002-A1 24 LED indicator (internal)FN2001-A1 Networking module (See Note 1)FCA2001-A1 Isolated RS232 moduleFCA2002-A1 Isolated RS485 moduleCertified with the following Options with requirements from EN 54-2:Note:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm Confirmation from fire alarm routing equipment7.10.1 Output to automatic fire protection equipment Type A7.10.2 Output to automatic fire protection equipment Type B7.10.3 Output to automatic fire protection equipment Type C7.10.4 Fault monitoring of automatic fire protection equipment7.11 Delays to outputs7.12.2 Coincidence detection type B (only for FDnet & MS9i linetechnology)7.12.3 Coincidence detection type C7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1) Scope of approval does not include the operation of the networkfunctionality.2) This approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.FC722Control and indicating equipmentIncorporating as modular units:FCM7204-Z3 Operating unitSV24V/150W 150W Power supplyFCI2002-A1 Periphery board (2-Loop)FHA2003-A1 Rear housingand as optional modular units:FP2001-A1 70W Power supplyFHA2001-A1 Rear housingFCM7205-Y3 Operating unit (+ LED Ind.)FCM7203-H3 Operating unit (+ EVAC-Term.)FCM2027 PMI- & mainboardFTO2001-A1 Event printerFCI2003-A1 Loop extension (FDnet)FTO2002-A1 24 LED indicator (internal)FN2001-A1 Networking module (See Note 1)FN2008-A1 Ethernet Switch (See Note 1)FCA2001-A1 Isolated RS232 moduleFCA2002-A1 Isolated RS485 moduleFCI2001-D1 Fire brigade periphery moduleREDUX Redundancy module126aw/06Certified with the following Options with requirements from EN 54-2:18 Jan 2014 113

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsLPCB Ref.No.Note:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm Confirmation from fire alarm routing equipment7.10.1 Output to automatic fire protection equipment Type A7.10.2 Output to automatic fire protection equipment Type B7.10.3 Output to automatic fire protection equipment Type C7.10.4 Fault monitoring of automatic fire protection equipment7.11 Delays to outputs7.12.2 Coincidence detection type B (only for FDnet & MS9i linetechnology)7.12.3 Coincidence detection type C7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1) Scope of approval does not include the operation of the networkfunctionality.2) This approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.FC724Control and indicating equipmentIncorporating as modular units:FCM7204-Z3 Operating unitSV24V/150W 150W Power supplyFCI2004-A1 Periphery board (4-Loop)FHA2003-A1 Rear housingand as optional modular units:FCM7205-Y3 Operating unit (+ LED Ind.)FCM7203-H3 Operating unit (+ EVAC-Term.)FCM2027 PMI- & mainboardFCM2007-A2 Operating add-on module (4 LED ind.)FTO2001-A1 Event printerFCI2003-A1 Loop extension (FDnet)FTO2002-A1 24 LED indicator (internal)FN2001-A1 Networking module (See Note 1)FN2008-A1 Ethernet Switch (See Note 1)FCA2001-A1 Isolated RS232 moduleFCA2002-A1 Isolated RS485 moduleFCI2001-D1 Fire brigade periphery moduleREDUX Redundancy module126aw/07Certified with the following Options with requirements from EN 54-2:Note:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm Confirmation from fire alarm routing equipment7.10.1 Output to automatic fire protection equipment Type A7.10.2 Output to automatic fire protection equipment Type B7.10.3 Output to automatic fire protection equipment Type C7.10.4 Fault monitoring of automatic fire protection equipment7.11 Delays to outputs7.12.2 Coincidence detection type B (only for FDnet & MS9i linetechnology)7.12.3 Coincidence detection type C7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1) Scope of approval does not include the operation of the networkfunctionality.2) This approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.114 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsFC726Control and indicating equipmentIncorporating as modular units:LPCB Ref.No.126aw/08FCM7204-Z3SV24V/150WFCI2004-A1FHA2005-A1FCA2008-A1Operating unit150W Power supplyPeriphery board (4-Loop)Rear housingCard cage (5 slot)FT2040and as optional modular units:FCM7205-Y3 Operating unit (+ LED Ind.)FCM2027PMI- & mainboardFCM2007-A2 Operating add-on module (4 LED ind.)FCM2015-DA Operating add-on module (DA ind.)FTO2001-A1 Event printerFCI2003-A1 Loop extension (FDnet)FTO2002-A1 24 LED indicator (internal)FN2001-A1 Networking module (See Note 1)FN2008-A1 Ethernet Switch (See Note 1)FCA2001-A1 Isolated RS232 moduleFCA2002-A1 Isolated RS485 moduleFCI2001-D1 Fire brigade periphery moduleFTO2003-D1 Emergency alarm indicatorFCA2006-A1 Connection mod. (Card Cage)FCI2008-A1 I/O card (programmable)FCL2001-A1 Line card (FDnet)FCL2002-A1 Line card (collective)FCL2003-A1 Line card (MS9i)REDUXRedundancy moduleCertified with the following Options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm Confirmation from fire alarm routingequipment7.10.1 Output to automatic fire protection equipment TypeA7.10.2 Output to automatic fire protection equipment TypeB7.10.3 Output to automatic fire protection equipment TypeC7.10.4 Fault monitoring of automatic fire protectionequipment7.11 Delays to outputs7.12.1 Coincidence detection type A (only for MS9i &collective line technology)7.12.2 Coincidence detection type B (only for FDnet &MS9i line technology)7.12.3 Coincidence detection type C7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionNote:Scope of approval does not include the operation of the networkfunctionality.This approval does not constitute compliance with the fire detection andalarm systems requirements of EN 54-13.Fire detection terminal for use with FC2020, FC2030, FC2040 & FC2060 control andindicating equipmentIncorporating as modular units:FCM2029-A2 Operating unit126aw/R0118 Jan 2014 115

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsFTI2001-A1 Fire terminal boardFHA2001-A1 Rear housingand as optional modular units:LPCB Ref.No.Note:FCM2028 Operating unitFCM2027 PMI- & mainboardFTO2001-A1 Event printerFTO2002-A1 24 LED indicator (internal)FN2001-A1 Networking module (See Note 1)FN2008-A1 Ethernet Switch (See Note 1)FCA2001-A1 Isolated RS232 moduleFCA2002-A1 Isolated RS485 moduleFCM2003-C2 Operating unit (incl. FBA-Term.CH)FCM2003-N2 Operating unit (incl. EVAC-Term.NL)FTO2004-C1 PCB compl. FBA-Terminal (CH)FTO2007-N1 PCB compl. EVAC- module (NL)FP2001-A1 70W Power supplyH28G200 Housing baseREDUX Redundancy module1) Scope of approval does not include the operation of the networkfunctionality.2) This approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.FT724Fire detection terminal for use with FC721, FC722 & FC724 control and indicatingequipmentIncorporating as modular units:FCM7204-Z3 Operating unitFTI2001-A1 Fire terminal boardFHA2001-A1 Rear housingand as optional modular units:126aw/R02Note:FCM7205-Y3 Operating unit (+ LED Ind.)FCM7203-H3 Operating unit (+ EVAC-Term.)FCM2027 PMI- & mainboardFTO2001-A1 Event printerFTO2002-A1 24 LED indicator (internal)FN2001-A1 Networking module (See Note 1)FN2008-A1 Ethernet Switch (See Note 1)FCA2001-A1 Isolated RS232 moduleFCA2002-A1 Isolated RS485 moduleFP2001-A1 70W Power supplyH28G200 Housing baseREDUX Redundancy module1) Scope of approval does not include the operation of the networkfunctionality.2) This approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.CS1140Control and indicating equipmentComprising the following products:CC1140 Control and indicating equipmentCT11 Operators consoleCI1140 Integrated central unitIncorporating as modular units:E3X100 Master moduleE3X102 Master ModuleE3X103 Master ModuleE3X120 Master card Cl1145E3C010 Battery charging moduleE3C011 Battery charging moduleB2F020 ConverterB2F040 ConverterE3M140 Line module FD20E3M070 Line module "Interactive"126h/01116 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsE3M071 Line module InteractiveK3M140 Line card FD20K3M071 Line card Interactive to E3X120K3M080 Line card CollectiveB3Q460 Control console Algopilot "CT11"B3Q321 Fire department control panel (Swiss)E3G050 Contacts control unitE3G070 Universal control unitE3I020 RS232 unitK3I060 RS232 moduleE3L020 I/O control unitE3M080 Group line unitK3R071 Synoptic - Algo pilotK3R070 Synoptic - Algo pilotK3I050 LON/Synoptic converterE3M060 MS9i moduleE3G091 Remote TX i/faceE3M110 AnalogPLUS moduleE3M111 Line module AnaloguPLUSK3M111 Line card AnalogPLUSB3R051 Parallel indicator panel (24 x 2 LED)E3G080 Control module ExtinguishingB3Q440 Control console Extinguishing moduleE3G060 Control monitored moduleE3H020 C-Bus Gateway moduleE3I040 I-Bus/LON moduleB3Q560/B3Q600 Terminals ChinaB3Q580 Text display terminalB3Q590 Text control terminal NordicB3Q660 Operator console Standard Algopilot "CT11"B3Q661 Operator console Standard Algopilot "CT11"B3Q680 Control console Nordic Algopilot "CT11"B3Q565 Operator control Asia Pacific Algopilot "CT11"K3N010 RAM - ExtensionK3I110 LON Input/Output BoxE3M171 Line Module Ex InteractiveK5L020 Multi-Sect. Extinguishing P.C.BK3G060 Relay Card to Synptic BUSE3G100 Emergency Operation LinkE3G110 Emergency Link to E3G080K3R072 Synoptical DriverM3C080 Horn Monitoring ModuleCertified with the following Options with requirements from EN 54-2:19977.8 Outputs to fire alarm devices7.9 Output to fire alarm routing equipment7.10 Output to Fire Protection Equipment7.11 Delays to outputs7.12 Coincidence detection7.13 Alarm counter8.3 Fault signals from points8.4 Complete failure of power supply9.5 Disablement of addressable points10 Test condition11 Standardised input/output interfaceNotes:1) Compliance with clause 12.6.2 of EN 54-2:1997 requires LCD screen saving feature tobe disabled for the alarm condition.LPCB Ref.No.SMS (Novar Systems Ltd)Hamilton Industrial Park, 140 Waterside Road, Leicester LE5 1TN, United KingdomTel: +44 (0)116 246 2100 • Fax: +44 (0)116 246 2016Website: www.smsfire.co.ukCertificate No: 042bc to EN 54-2: 1997+ A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 200618 Jan 2014 117

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsLPCB Ref.No.Sentri1 Single loop analogue addressable control and indicating equipment 042bc/01Incorporating as modular units:2434-881 Mother board2434-862 Power supply2434-887 H.M.I (Human Machine Interface)Certified with the following options with requirements from EN 54 Part 2:Sentri1-SPSentri1-PO7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points10 Test conditionSingle loop analogue addressable control and indicating equipment(Spanish language variant)Incorporating as modular units:2434-881 Mother board2434-862 Power supply2434-887 H.M.I (Human Machine Interface)Certified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points10 Test conditionSingle loop analogue addressable control and indicating equipment(Portuguese language variant)Incorporating as modular units:2434-881 Mother board2434-862 Power supply2434-887 H.M.I (Human Machine Interface)Certified with the following options with requirements from EN 54 Part 2:042bc/02042bc/037.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points10 Test conditionSentri2 Two loop analogue addressable control and indicating equipment (English language) 042bc/04Sentri2-POTwo loop analogue addressable control and indicating equipment (Portuguese language 042bc/05variant)Sentri2-SPTwo loop analogue addressable con(Spanish language variant) control and indicating 042bc/06equipmentIncorporating as modular units:2434-859 Master Controller Board (MCB)2434-862 Power Supply Unit2434-762 Display and Key card (DKC)2434-669 Loop processor card4374-164 Text Membrane (English)4374-169 Text Membrane (Spanish)4374-170 Text Membrane (Portuguese)2434-861 Copper network cardScope of approval does not include the operation of the network card)Certified with the following options with requirements from EN 54 Part 2:Sentri4Sentri4-POSentri4-SP7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionOne to Four loop analogue addressable control and indicating equipment (Englishlanguage)One to Four loop analogue addressable control and indicating equipment (Portugueselanguage variant without printer module)One to Four loop analogue addressable control and indicating equipment (Spanishlanguage variant without printer module)Incorporating as modular units2434-863 Master controller card (M.C.C)2434-710 Loop card042bc/07042bc/09042bc/10118 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products2434-831 Power supply PCB2434-854 Backplane PCB2434-861 Display and Key card (D.K.C)2434-864 Terminal card2434-565 Printer Module4374-167 Text Membrane (English)4374-171 Text Membrane (Spanish)4374-172 Text Membrane (Portuguese)2434-674 Copper network cardScope of approval does not include the operation of the network card)Certified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionLPCB Ref.No.Thorn Security Limited, Trading as Tyco Safety ProductHanworth Road, Sunbury on Thames, London TW16 5DB, United KingdomTel: 01932 743268 • Fax: 01932 743292E-mail: rdhadda@tycoint.com • Website: www.Tycoemea.comCertificate No: 018c-(cl-3) to EN54-2: 1997, EN54-4: 1997Certificate No: 018f-(cl-1) to EN 54-2: 1997 + A1: 006 & EN 54-4: 1997 + A1: 2002 + A2: 2006Certificate No: 018g-(cl-1) to EN 54-2: 1997 + A1: 2006 & EN 54-4: 1997 + A1: 2002 + A2: 2006Certificate No: 018h-(cl-1) to EN 54-2: 1997 + A1: 2006 & EN 54-4: 1997 + A1: 2002 + A2: 2006Certificate No: 018j-(cl-1) to EN 54-2: 1997 + A1: 2006 & EN 54-4: 1997 + A1: 2002 + A2: 2006Certificate No: 018k-(cl-1) to EN 54-2: 1997 + A1: 2006 & EN 54-4: 1997 + A1: 2002 + A2: 2006Certificate No: 018m-(cl-1) to EN 54-2: 1997 + A1: 2006 & EN 54-4: 1997 + A1: 2002 + A2: 2006Certificate No: 018q-(cl-2) to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006Certificate No: 018r-(cl-1) to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006Certificate No: 018n-(cl-1) to EN 54-4: 1997 + A1: 2002 + A2: 2006Control & Indicating EquipmentCertificated ProductsMZXC+2 zone conventional control and indicating equipmentLPCB Ref.No.018c/02MZXC+Incorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface (option)Certified with the following options from EN 54: Part 27.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition4 zone conventional control and indicating equipmentIncorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface (option)Certified with the following options from EN 54: Part 27.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition018c/0318 Jan 2014 119

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsMZXC+MZXC+MZXC+MZXC+MZXC+MZXC+8 zone conventional control and indicating equipmentIncorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface (option)Certified with the following options from EN 54: Part 27.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition16 zone conventional control and indicating equipmentIncorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface (option)Certified with the following options from EN 54: Part 27.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition32 zone conventional control and indicating equipmentIncorporating as modular units:C1627 Mother boardC1629 Display boardC1632 16 Zone expansion boardC1652 5A Power Supply boardC1631 Repeater interface (option)Certified with the following options from EN 54: Part 27.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition8 zone conventional repeater unitIncorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface16 zone conventional repeater unitIncorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface32 zone conventional repeater unitIncorporating as modular units:LPCB Ref.No.018c/04018c/05018c/06018c/R01018c/R02018c/R03C1627 Mother boardC1629 Display boardC1631 Repeater interfaceMX4000 2-8 2-8 loop Analogue Addressable Control and Indicating Equipment 018f/01Note:1. The following product variants are approved -Finished goods No. 557.200.003, MX4000 1-4 loop CIE, shallow housingFinished goods No. 557.200.005, MX-BBX battery box, shallow housingFinished goods No. 557.200.004, MX4000 1-8 loop CIE, deep housingFinished goods No. 557.200.006, MX-DPBX battery box, deep housing (door access)120 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsFinished goods No. 557.200.016, MX-DPBX battery box, deep housing (plain coveraccess)Finished goods No. 557.200.009, MX4000 1-4 loop, flush housingFinished goods No. 557.200.019, MX-BBX-F battery box, flush housingIncorporating as modular units:OCM800 Operator Control ModuleODM800 Operator Display ModuleCPU800 Main CPU moduleFIM802 Field Interface Module drives 1 or 2 loopsPSU830 Power Supply Moduleand as optional modular units:XLM800 Expansion Loop Module drives 1 or 2 additional loopsANN840 40 + 40 LED Annunciator moduleANN880 80 LED Annunciator moduleCOM820 20 way Status Command ModuleMPM800 Multi Purpose Interface ModuleIOB800 Input/Output Expansion BoardFB800 Fuse BoardLPCB Ref.No.Certified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal (Type A dependency)7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.12.3 Dependencies on more than one alarm signal (Type C dependency)7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition11 Standardized input/output interfaceMXR Repeater panel is approved for use with the MX4000 Control and Indicating Equipment: 018f/R01Note:1. The following product variants are approved -Finished goods No. 557.200.013, MXR-PSU repeaterFinished goods No. 557.200.018, MXR-PSU-F repeater flush housingFinished goods No. 557.200.012, MXR repeaterFinished goods No. 557.200.017, MXR-F repeater flush housingIncorporating as modular units:OCM800 (Operator Control Module)ODM800 (Operator Display Module)PSU830 (Power Supply Module)and as optional modular units:ANN840 (40 + 40 LED Annunciator)ANN880 (80 LED Annunciator)MPM800 (Multi Purpose Interface Module)IOB800 (Input/Output Expansion Board)FB800 (Fuse Board)MX1000 1 loop Analogue Addressable Control and Indicating Equipment 018g/01Note:1. The following product variants are approved -Finished goods No. 557.200.001, MX1000 1 loop CIE, shallow housingFinished goods No. 557.200.005, MX-BBX battery box, shallow housingFinished goods No. 557.200.002, MX1000 1 loop CIE, deep housingFinished goods No. 557.200.019, MX-BBX-F battery box, flush housingIncorporating as modular units:18 Jan 2014 121

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsOCM800 Operator Control ModuleODM800 Operator Display ModuleCPU800 Main CPU moduleFIM801 Field Interface ModulePSU830 Power Supply Moduleand as optional modular units:ANN840 40 + 40 LED Annunciator moduleANN880 80 LED Annunciator moduleCOM820 20 way Status Command ModuleMPM800 Multi Purpose Interface ModuleIOB800 Input/Output Expansion BoardFB800 Fuse BoardCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal (Type A dependency)7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.12.3 Dependencies on more than one alarm signal (Type C dependency)7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition11 Standardized input/output interfaceMXR Repeater panel is approved for use with the MX1000 Control and IndicatingEquipment (LPCB Reference 018f/R01):Note:1. The following product variants are approved -Finished goods No. 557.200.013, MXR-PSU repeaterFinished goods No. 557.200.018, MXR-PSU-F repeater flush housingFinished goods No. 557.200.012, MXR repeaterFinished goods No. 557.200.017, MXR-F repeater flush housingIncorporating as modular units:OCM800 (Operator Control Module)ODM800 (Operator Display Module)PSU830 (Power Supply Module)and as optional modular units:LPCB Ref.No.ANN840 (40 + 40 LED Annunciator)ANN880 (80 LED Annunciator)MPM800 (Multi Purpose Interface Module)IOB800 (Input/Output Expansion Board)FB800 (Fuse Board)MX2 1-8 loop Analogue Addressable Control and Indicating Equipment 018h/01Notes:1. The following product variants are approved -Finished goods No. 557.200.203, MX2-210 1-4 loop CIE, shallow housingFinished goods No. 557.200.205, MX2-211, 1-8 loop CIE, deep housingIncorporating as modular units:DCM800 Operator Control / Display ModuleCPU800 Main CPU moduleFIM802 Field Interface Module drives 1 or 2 loopsPSU830 Power Supply Moduleand as optional modular units:122 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsXLM800 Expansion Loop Module drives 1 or 2 additional loopsANN881 80 LED Annunciator moduleMPM800 Multi Purpose Interface ModuleFB800 Fuse BoardCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal (Type A dependency)7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.12.3 Dependencies on more than one alarm signal (Type C dependency)7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition11 Standardized input/output interfaceMXR Repeater panel is approved for use with the MX2 Control and Indicating Equipment(LPCB Reference 018f/R01):Notes:1. The following product variants are approved -Finished goods No. 557.200.013, MXR-PSU repeaterFinished goods No. 557.200.018, MXR-PSU-F repeater flush housingFinished goods No. 557.200.012, MXR repeaterFinished goods No. 557.200.017, MXR-F repeater flush housingIncorporating as modular units:OCM800 (Operator Control Module)ODM800 (Operator Display Module)PSU830 (Power Supply Module)and as optional modular units:LPCB Ref.No.ANN840 (40 + 40 LED Annunciator)ANN880 (80 LED Annunciator)MPM800 (Multi Purpose Interface Module)IOB800 (Input/Output Expansion Board)FB800 (Fuse Board)T2000 2-8 loop Analogue Addressable Control and Indicating Equipment 018j/01Notes:1. The following product variants are approved -Finished goods No. 557.200.600, T2000 2-8 loop CIE, stainless housingFinished goods No. 557.200.602, T2000-BB battery box, stainless housingFinished goods No. 557.200.610, T2000 2-8 loop CIE, mild steel housingFinished goods No. 557.200.605, T2000-BB battery box, mild steel housingIncorporating as modular units:OCM800 Operator Control ModuleODM800 Operator Display ModuleCPU800 Main CPU moduleFIM802 Field Interface Module drives 1 or 2 loopsPSU830 Power Supply Moduleand as optional modular units:XLM800 Expansion Loop Module drives 1 or 2 additional loopsANN840 40 + 40 LED Annunciator moduleANN880 80 LED Annunciator moduleCOM820 20 way Status Command ModuleMPM800 Multi Purpose Interface ModuleIOB800 Input/Output Expansion BoardFB800 Fuse Board18 Jan 2014 123

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsLPCB Ref.No.Certified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal (Type A dependency)7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.12.3 Dependencies on more than one alarm signal (Type C dependency)7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition11 Standardized input/output interfaceT2000R Repeater panel is approved for use with the T2000CV Control and IndicatingEquipment (LPCB Reference 018j/R01):Notes1. The following product variants are approved -Finished goods No. 557.200.601, T2000R (AC) repeater stainless housingFinished goods No. 557.200.604, T2000R (DC) repeater stainless housingFinished goods No. 557.200.611, T2000R (AC) repeater mild steel housingFinished goods No. 557.200.612, T2000R (DC) repeater mild steel housingIncorporating as modular units:OCM800 (Operator Control Module)ODM800 (Operator Display Module)PSU830 (Power Supply Module)and as optional modular units:ANN840 (40 + 40 LED Annunciator)ANN880 (80 LED Annunciator)MPM800 (Multi Purpose Interface Module)IOB800 (Input/Output Expansion Board)FB800 (Fuse Board)T2000R Repeater panel is approved for use with the T2000 Control and Indicating Equipment: 018j/R01Notes:1. The following product variants are approved -Finished goods No. 557.200.601, T2000R (AC) repeater stainless housingFinished goods No. 557.200.604, T2000R (DC) repeater stainless housingFinished goods No. 557.200.611, T2000R (AC) repeater mild steel housingFinished goods No. 557.200.612, T2000R (DC) repeater mild steel housingIncorporating as modular units:OCM800 (Operator Control Module)ODM800 (Operator Display Module)PSU830 (Power Supply Module)and as optional modular units:ANN840 (40 + 40 LED Annunciator)ANN880 (80 LED Annunciator)MPM800 (Multi Purpose Interface Module)IOB800 (Input/Output Expansion Board)FB800 (Fuse Board)T2000CV 3 loop Analogue Addressable Control and Indicating Equipment 018k/01Notes:1. The following product variants are approved -Finished goods No. 557.200.620, T2000CV 3 loop CIEFinished goods No. 557.200.605, T2000-BB battery boxIncorporating as modular units:124 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsOCM800ODM800CPU800XLM800FIM802PSU830Operator Control ModuleOperator Display ModuleMain CPU moduleExpansion Loop Module “drives 1 or 2 additional loops”Field Interface Module “drives 1 or 2 loops”Power Supply ModuleLPCB Ref.No.and as optional modular units:ANN840ANN880COM820MPM800IOB800FB80040 + 40 LED Annunciator module80 LED Annunciator module20 way Status Command ModuleMulti Purpose Interface ModuleInput/Output Expansion BoardFuse BoardCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal (Type A dependency)7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.12.3 Dependencies on more than one alarm signal (Type C dependency)7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition11 Standardized input/output interfaceT2000R Repeater panel is approved for use with the T2000CV Control and IndicatingEquipment (LPCB Reference 018j/R01):Notes:The following product variants are approved -Finished goods No. 557.200.601, T2000R (AC) repeater stainless housingFinished goods No. 557.200.604, T2000R (DC) repeater stainless housingFinished goods No. 557.200.611, T2000R (AC) repeater mild steel housingFinished goods No. 557.200.612, T2000R (DC) repeater mild steel housingIncorporating as modular units:OCM800ODM800PSU830(Operator Control Module)(Operator Display Module)(Power Supply Module)MZX-125and as optional modular units:ANN840 (40 + 40 LED Annunciator)ANN880 (80 LED Annunciator)MPM800 (Multi Purpose Interface Module)IOB800 (Input/Output Expansion Board)FB800 (Fuse Board)Analogue Addressable Control and Indicating Equipment1 loop, 16 ZoneIncorporating as modular units:DCM816 Operator Control / Display ModuleCPU800 Main CPU moduleFIM801 Field Interface ModulePMM800 Power Supply MonitorBAQ60T24 Power SupplyCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment018m/0118 Jan 2014 125

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsMZX-2507.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal (Type A dependency)7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.12.3 Dependencies on more than one alarm signal (Type C dependency)7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition11 Standardized input/output interfaceAnalogue Addressable Control and Indicating Equipment1 loop, 32 ZoneIncorporating as modular units:DCM832 Operator Control / Display ModuleCPU800 Main CPU moduleFIM802 Field Interface Module (1 loop version Part No. 2605053)PMM800 Power Supply MonitorBAQ140T24 Power Supplyand as an optional modular unit:LPCB Ref.No.018m/02IOB800Input/Output Expansion BoardMZX-251Certified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal (Type A dependency)7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.12.3 Dependencies on more than one alarm signal (Type C dependency)7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition11 Standardized input/output interfaceAnalogue Addressable Control and Indicating Equipment1 loop, 32 ZoneIncorporating as modular units:DCM832 Operator Control / Display ModuleCPU800 Main CPU moduleFIM802 Field Interface Module (1 loop version Part No. 2605053)PMM800 Power Supply MonitorBAQ140T24 Power Supplyand as an optional modular unit:018m/03IOB800Input/Output Expansion BoardCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs126 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsMZX-250-CH7.12.1 Dependencies on more than one alarm signal (Type A dependency)7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.12.3 Dependencies on more than one alarm signal (Type C dependency)7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition11 Standardized input/output interfaceAnalogue Addressable Control and Indicating Equipment1 loop, 32 ZoneIncorporating as modular units:DCM832 Operator Control / Display ModuleCPU800 Main CPU moduleFIM802 Field Interface Module (1 loop version Part No. 2605053)PMM800 Power Supply MonitorFBF-CH Swiss Fire Brigade InterfaceBAQ140T24 Power Supplyand as an optional modular unit:LPCB Ref.No.018m/04IOB800Input/Output Expansion BoardMZX-251-SCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal (Type A dependency)7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.12.3 Dependencies on more than one alarm signal (Type C dependency)7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition11 Standardized input/output interfaceAnalogue Addressable Control and Indicating Equipment1 loop, 32 ZoneIncorporating as modular units:DCM832 -S Operator Control / Display Module (ScandinavianFire Brigade Interface/key)CPU800 Main CPU moduleFIM802 Field Interface Module (1 loop version Part No. 2605053)PMM800 Power Supply MonitorBAQ140T24 Power Supplyand as an optional modular unit:018m/05IOB800Input/Output Expansion BoardCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal (Type A dependency)7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.12.3 Dependencies on more than one alarm signal (Type C dependency)7.13 Alarm counter18 Jan 2014 127

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsMZX-2528.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition11 Standardized input/output interfaceAnalogue Addressable Control and Indicating Equipment2 loop, 32 ZoneIncorporating as modular units:DCM832 Operator Control / Display ModuleCPU800 Main CPU moduleFIM802 Field Interface ModulePMM800 Power Supply MonitorBAQ140T24 Power Supplyand as an optional modular unit:LPCB Ref.No.018m/06IOB800Input/Output Expansion BoardMZX-252-CHCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal (Type A dependency)7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.12.3 Dependencies on more than one alarm signal (Type C dependency)7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition11 Standardized input/output interfaceAnalogue Addressable Control and Indicating Equipment2 loop, 32 ZoneIncorporating as modular units:DCM832 Operator Control / Display ModuleCPU800 Main CPU moduleFIM802 Field Interface ModulePMM800 Power Supply MonitorFBF-CH Swiss Fire Brigade InterfaceBAQ140T24 Power Supplyand as an optional modular unit:018m/07IOB800Input/Output Expansion BoardCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal (Type A dependency)7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.12.3 Dependencies on more than one alarm signal (Type C dependency)7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition11 Standardized input/output interface128 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsMZX-253MZX-254MZX-254-SAnalogue Addressable Control and Indicating Equipment2-4 loop, 64 ZoneIncorporating as modular units:DCM864R Operator Control / Display ModuleCPU800 Main CPU moduleFIM802Field Interface ModulePMM800Power Supply MonitorBAQ140T24 Power Supplyand as optional modular units:IOB800Input/Output Expansion BoardPMM840Power Supply MonitorXLM800Loop Expander BoardCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal (Type A dependency)7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.12.3 Dependencies on more than one alarm signal (Type C dependency)7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition11 Standardized input/output interfaceAnalogue Addressable Control and Indicating Equipment2-4 loop, 240 ZoneIncorporating as modular units:DCM832 Operator Control / Display ModuleCPU800 Main CPU moduleFIM802 Field Interface ModulePMM800 Power Supply MonitorBAQ140T24 Power Supplyand as optional modular units:IOB800 Input/Output Expansion BoardPMM840 Power Supply MonitorXLM800 Loop Expander BoardCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal (Type A dependency)7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.12.3 Dependencies on more than one alarm signal (Type C dependency)7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition11 Standardized input/output interfaceAnalogue Addressable Control and Indicating Equipment2-4 loop, 240 ZoneIncorporating as modular units:DCM832-S Operator Control / Display Module (Scandinavian Fire BrigadeInterface/key)LPCB Ref.No.018m/08018m/09018m/1018 Jan 2014 129

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsMZX-254-CHMZX-16-RMZX-32-RCPU800 Main CPU moduleFIM802 Field Interface ModulePMM800 Power Supply MonitorBAQ140T24 Power Supplyand as optional modular units:IOB800 Input/Output Expansion BoardPMM840 Power Supply MonitorXLM800 Loop Expander BoardCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal (Type A dependency)7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.12.3 Dependencies on more than one alarm signal (Type C dependency)7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition11 Standardized input/output interfaceAnalogue Addressable Control and Indicating Equipment2-4 loop, 240 ZoneIncorporating as modular units:DCM832 Operator Control / Display ModuleCPU800 Main CPU moduleFIM802 Field Interface ModulePMM800 Power Supply MonitorFBF-CH Swiss Fire Brigade InterfaceBAQ140T24 Power Supplyand as optional modular units:IOB800 Input/Output Expansion BoardPMM840 Power Supply MonitorXLM800 Loop Expander BoardCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10.1 Outputs to fire protection equipment (Type A)7.10.2 Outputs to fire protection equipment (Type B)7.10.3 Outputs to fire protection equipment (Type C)7.10.4 Fault monitoring of fire protection equipment7.11 Delays to outputs7.12.1 Dependencies on more than one alarm signal (Type A dependency)7.12.2 Dependencies on more than one alarm signal (Type B dependency)7.12.3 Dependencies on more than one alarm signal (Type C dependency)7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition11 Standardized input/output interface16 Zone Repeater Panel, is approved for use with the MZX-125 Control and IndicatingEquipmentIncorporating as modular units:DCM816 Operator Control / Display ModulePMM800 Power Supply MonitorBAQ60T24 Power Supply32 Zone Repeater Panel, is approved for use with the MZX-250, MZX-250-CH, MZX-251,MZX-252 & MZX-252-CH Control and Indicating EquipmentLPCB Ref.No.018m/11018m/R01018m/R02130 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsLPCB Ref.No.MZX-32-SRMZX-64-DRMZX-DRMZX-SDRMZX-CHDRIncorporating as modular units:DCM832 Operator Control / Display ModulePMM800 Power Supply MonitorBAQ60T24 Power Supply32 Zone Repeater Panel, is approved for use with the MZX-251-S Control and IndicatingEquipmentIncorporating as modular units:DCM832-S Operator Control / Display ModulePMM800 Power Supply MonitorBAQ60T24 Power Supply64 Zone Repeater Panel, is approved for use with the MZX-253 Control and IndicatingEquipmentIncorporating as modular units:DCM832R Operator Control / Display ModulePMM805Power Supply Monitor (24 VDC)240 Zone Repeater Panel, is approved for use with the MZX-254 Control and IndicatingEquipmentIncorporating as modular units:DCM832 Operator Control / Display ModulePMM805Power Supply Monitor (24 VDC)240 Zone Repeater Panel, is approved for use with the MZX254-S Control and IndicatingEquipmentIncorporating as modular units:DCM832 -S Operator Control / Display Module (Scandinavian Fire BrigadeInterface/key)PMM805Power Supply Monitor (24 VDC)240 Zone Repeater Panel, is approved for use with the MZX-254-CH Control andIndicating Equipment018m/R03018m/R04018m/R05018m/R06018m/R07Incorporating as modular units:DCM832 Operator Control / Display ModuleFBF-CH Swiss Fire Brigade InterfacePMM805Power Supply Monitor (24 VDC)PSU A17 Addressable 17Ah Power Supply Unit 018n/02Notes:1. The unit is not intended to supply power to Fire Alarm Control Panels2. The maximum lead length for the fault output connection is 3mPSU A38 Addressable 38Ah Power Supply Unit 018n/03Notes:1. The unit is not intended to supply power to Fire Alarm Control Panels2. The maximum lead length for the fault output connection is 3m508.031.005.xxMZXC 4 zone conventional control and indicating equipment.018q/03Incorporating as modular units:C1694 - 2605503, 4 Zone MotherboardBAQ-35T24 Power SupplyCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.12.1 Dependencies on more than one alarm signal - Type A7.13 Alarm counter10 Test condition508.031.006.xxNote: xx indicates the language optionBlank = Blank facia overlayMZXC 8 zone conventional control and indicating equipment.Incorporating as modular units:C1694 - 2605504, 8 Zone MotherboardBAQ-35T24 Power SupplyCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment018q/0418 Jan 2014 131

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products508.031.016.xx508.031.004.xx508.031.005.xx508.031.006.xx7.12.1 Dependencies on more than one alarm signal - Type A7.13 Alarm counter10 Test conditionNote: xx indicates the language optionBlank = Blank facia overlayFire alarm repeater (mains).Incorporating as modular units:C1694 2605505, Repeater MotherboardBAQ-35T24 Power SupplyNotes:1. Compatible with 508.031.005.xx & 508.031.006.xx panels.2. Also compatible with 508.031.005.xx & 508.031.006.xxtwin wire conventional panels on certificate 018r.3. xx indicates the language optionBlank = Blank facia overlayEG = English facia overlayMZXC 2 zone, twin wire conventional control and indicating equipment.Incorporating as modular units:C1694 - 2605508, 2 Zone Twin Wire MotherboardBAQ-35T24, Power SupplyCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.12.1 Dependencies on more than one alarm signal - Type A7.13 Alarm counter10 Test conditionNote: xx indicates the language optionEG = English facia overlayMZXC 4 zone, twin wire conventional control and indicating equipment.Incorporating as modular units:C1694 - 2605509, 4 Zone Twin Wire MotherboardBAQ-35T24, Power SupplyCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.12.1 Dependencies on more than one alarm signal - Type A7.13 Alarm counter10 Test conditionNote: xx indicates the language optionEG = English facia overlayMZXC 8 zone twin wire conventional control and indicating equipment.Incorporating as modular units:C1694 - 2605510, 8 Zone Twin Wire MotherboardBAQ-35T24 Power SupplyCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm devices7.9.1 Output to fire alarm routing equipment7.12.1 Dependencies on more than one alarm signal - Type A7.13 Alarm counter10 Test conditionLPCB Ref.No.018q/R01018r/01018r/02018r/03Note:xx indicates the language optionEG = English facia overlay132 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTUTC Fire & Security (Africa) trading as ZitonZiton House, 555 Voortrekker Road, Maitland 7405, Cape Town, South AfricaTel: +27 21 5066000 • Fax: +27 21 5066100Website: www.utcfireandsecurity.comUK Sales Enquiries:Tel: +44 (0)1908 281981 • Fax: +44 (0)1908 282554Certificate No: 092h to BS EN 54-2: 1998 and BS EN 54-4: 1998N.B. This certificate is to a withdrawn standard. Control and indicating equipment conforming to this standard is not suitable foruse within the jurisdiction of the European Union (EU). This certificate, to the withdrawn standard, is maintained becausecontrol and indicating equipment meeting the withdrawn standard is still requested by some regulators outside of the EU.Certificated ProductsZP31, 2 and 4 loop analogue addressable control and indicating equipmentIncorporating as modular units:ZP3-MB2-4L 4 Loop Main boardZP3-MB2-2L 2 Loop Main boardZP3-MB2-1L 1 Loop Main boardZP3-CPU1 CPU boardZP3-DB1 Display boardZP3-ZB50 50 Zone LED boardZP3-CB1 Commissioning key switch boardZP3-PR1 Printer KitZP3AB-SCB-D Control bus driveZP3AB-RL8 Programmable relay output board, 8 wayZP3-AB-MA8 Programmable monitored output board, 8 wayZP3AB-OP24 Programmable transistor output board, 24 wayZP3AB-MIP8 Programmable input board, 8 wayZP3-xL230V ac Power supply unitApproved with the following options from EN54-2:7.8 Output to fire alarm devices7.9 Output to fire alarm routing equipment7.10 Output to fire protection equipment7.11 Delays to outputs7.12 Co-incidence detection7.13 Alarm counter8.3 Fault signals from points8.9 Output to fault routing equipment9.5 Disablement of addressable points10.0 Test condition11.0 Standardised input/output interfaceLPCB Ref.No.092h/01UTC Fire & Security (Pty) LTD Trading as ZitonZiton House, 555 Voortrekker Road, Maitland 7405, South AfricaTel: +27 21 5066000 • Fax: +27 21 5066100Website: www.ziton.comCertificate No: 092h to BS EN 54 - 2: 1998 and BS EN 54- 4: 1998 N.B. This certificate is to a withdrawn standard. Control andindicating equipment conforming to this standard is not suitable for use within the jurisdiction of the European Union (EU). Thiscertificate, to the withdrawn standard, is maintained because controland indicating equipment meeting the withdrawn standardis still requested by some regulators outside of the EU.Certificated ProductsZP3 (Traditional ChineseLanguage Variant)1, 2 and 4 loop analogue addressable control and indicating equipmentIncorporating as modular units:LPCB Ref.No.092h/0118 Jan 2014 133

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsZP3-MB2-4L 4 Loop Main boardZP3-MB2-2L 2 Loop Main boardZP3-MB2-1L 1 Loop Main boardZP3-CPU1 CPU boardZP3-DB1 Display boardZP3-ZB50 50 Zone LED boardZP3-CB1 Commissioning key switch boardZP3-PR1 Printer KitZP3AB-SCB-D Control bus driverZP3AB-RL8 Programmable relay output board, 8 wayZP3-AB-MA8 Programmable monitored output board, 8 wayZP3AB-OP24 Programmable transistor output board, 24 wayZP3AB-MIP8 Programmable input board, 8 wayZP3-Xl 230Vac Power supply unitApproved with the following options from BS EN54 Part 2:7.8 Output to fire alarm devices7.9 Output to fire alarm routing equipment7.10 Output to fire protection equipment7.11 Delays to outputs7.12 Co-incidence detection7.13 Alarm counter8.3 Fault signals from points8.4 Total loss of power8.9 Output to fault routing equipment9.5 Disablement of addressable points10 Test condition11 Standardised input/output interfaceLPCB Ref.No.UTC Fire & Security BVKelvinstraat 7, NL-6003DH, Weert, The NetherlandsTel: + 31 495 58 30 00 • Fax: + 31 495 55 00 42E-mail: Daragh.O'Donnell@fs.utc.com • Website: www.utcfireandsecurity.comCertificate No: 092v-(cl-2) to EN54-2: 1997 + A1: 2006 and EN54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsSG2000Conventional two zone control and indicating equipmentIncorporating the following units:1X-F2-MB Main control board2010-1-RB Optional relay board2010-1-SB Optional expander I/O board2010-1-NB Optional Network board2010-PS-20 2A Power Supply2010-SK Scandinavian Key Lock and Key (Applicable to SC variant)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm device(s)7.11 Delays to outputs8.4 Total loss of the power supply10 Test condition1) This product approval does not constitute compliance with the fire detection and alarmsystems requirements of EN 54-13.2) Scope of approval does not include the operation of the network functionality.3) Available with the following language kits:01 Dutch, 02 -French, 03 - English (UK), 04 German, 05 Norwegian, 06 Swedish, 07Danish, 09 Spanish, 10 Italian,11 Belgian, Dutch, 15 Arabic, 18 Polish, 19 Turkish, 20Czech, 21 Portuguese, 22 Hungarian, 24 Slovakian, 25 Russian, 27- Lithuanian, 28Finish, 30 Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45Romanian, 71 Catalan, 99 - English (International)LPCB Ref.No.092v/01134 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsSG2000SCSG4000Conventional two zone control and indicating equipment with Scandinavian key switchIncorporating the following units:1X-F2-MB Main control board2010-1-RB Optional relay board2010-1-SB Optional expander I/O board2010-1-NB Optional Network board2010-PS-20 2A Power Supply2010-SK Scandinavian Key Lock and Key (Applicable to SC variant)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm device(s)7.11 Delays to outputs8.4 Total loss of the power supply10 Test condition1) This product approval does not constitute compliance with the fire detection and alarmsystems requirements of EN 54-13.2) Scope of approval does not include the operation of the network functionality.3) Available with the following language kits:01 - Dutch, 02 -French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 - Swedish,07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 - Arabic, 18 - Polish, 19 -Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27-Lithuanian, 28 - Finish, 30 - Estonian, 31 - Latvian, 32 - Belgian French, 36 - FrenchInternational, 45 - Romanian, 71 - Catalan, 99 - English (International)Conventional four zone control and indicating equipmentIncorporating the following units:1X-F4-MB Main control board2010-1-RB Optional relay board2010-1-SB Optional expander I/O board2010-1-NB Optional Network board2010-PS-20 2A Power Supply2010-SK Scandinavian Key Lock and Key (Applicable to SC variant)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.11 Delays to outputs8.4 Total loss of the power supply10 Test conditionLPCB Ref.No.092v/01092v/02SG4000SC1) This product approval does not constitute compliance with the fire detection and alarmsystems requirements of EN 54-13.2) Scope of approval does not include the operation of the network functionality.3) Available with the following language kits:01 Dutch, 02 -French, 03 - English (UK), 04 German, 05 Norwegian, 06 Swedish, 07Danish, 09 Spanish, 10 Italian,11 Belgian, Dutch, 15 Arabic, 18 Polish, 19 Turkish, 20Czech, 21 Portuguese, 22 Hungarian, 24 Slovakian, 25 Russian, 27- Lithuanian, 28Finish, 30 Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45Romanian, 71 Catalan, 99 - English (International)Conventional four zone control and indicating equipment with Scandinavian key switchIncorporating the following units:1X-F4-MB Main control board2010-1-RB Optional relay board2010-1-SB Optional expander I/O board2010-1-NB Optional Network board2010-PS-20 2A Power Supply2010-SK Scandinavian Key Lock and Key (Applicable to SC variant)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.11 Delays to outputs8.4 Total loss of the power supply092v/0218 Jan 2014 135

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products10 Test conditionLPCB Ref.No.SG80001) This product approval does not constitute compliance with the fire detection and alarmsystems requirements of EN 54-13.2) Scope of approval does not include the operation of the network functionality.3) Available with the following language kits:01 Dutch, 02 -French, 03 - English (UK), 04 German, 05 Norwegian, 06 Swedish, 07Danish, 09 Spanish, 10 Italian,11 Belgian, Dutch, 15 Arabic, 18 Polish, 19 Turkish, 20Czech, 21 Portuguese, 22 Hungarian, 24 Slovakian, 25 Russian, 27- Lithuanian, 28Finish, 30 Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45Romanian, 71 Catalan, 99 - English (International)Conventional eight zone control and indicating equipmentIncorporating the following units:1X-F8-MB Main control board2010-1-RB Optional relay board2010-1-SB Optional expander I/O board2010-1-NB Optional Network board2010-PS-40 4A Power Supply2010-SK Scandinavian Key Lock and Key ( Applicable to SC variant)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.11 Delays to outputs8.4 Total loss of the power supply10 Test condition092v/03SG8000SC1) This product approval does not constitute compliance with the fire detection and alarmsystems requirements of EN 54-13.2) Scope of approval does not include the operation of the network functionality.3) Available with the following language kits:01 Dutch, 02 -French, 03 - English (UK), 04 German, 05 Norwegian, 06 Swedish, 07Danish, 09 Spanish, 10 Italian,11 Belgian, Dutch, 15 Arabic, 18 Polish, 19 Turkish, 20Czech, 21 Portuguese, 22 Hungarian, 24 Slovakian, 25 Russian, 27- Lithuanian, 28Finish, 30 Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45Romanian, 71 Catalan, 99 - English (International)Conventional eight zone control and indicating equipment with Scandinavian key switchIncorporating the following units:1X-F8-MB Main control board2010-1-RB Optional relay board2010-1-SB Optional expander I/O board2010-1-NB Optional Network board2010-PS-40 4A Power Supply2010-SK Scandinavian Key Lock and Key ( Applicable to SC variant)Certified with the following options with requirements from EN 54-2:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.11 Delays to outputs8.4 Total loss of the power supply10 Test condition092v/031) This product approval does not constitute compliance with the fire detection and alarmsystems requirements of EN 54-13.2) Scope of approval does not include the operation of the network functionality.3) Available with the following language kits:01 Dutch, 02 -French, 03 - English (UK), 04 German, 05 Norwegian, 06 Swedish, 07Danish, 09 Spanish, 10 Italian,11 Belgian, Dutch, 15 Arabic, 18 Polish, 19 Turkish, 20Czech, 21 Portuguese, 22 Hungarian, 24 Slovakian, 25 Russian, 27- Lithuanian, 28Finish, 30 Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45Romanian, 71 Catalan, 99 - English (International)2X-F1 1 Loop intelligent analogue addressable control and indicating equipment 092v/05136 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsIncorporating the following units:2010-2-F1-MB Main control board2X-UIUser interface control board2010-2-PS-40 4A Power Supplyand as optional modules:LPCB Ref.No.2010-2-NB2010-2-LB2010-2-232-IB2X-ZI-202X-ZI-402010-2-PS-C2Network board2-Loop Node CardInterface Board for External Printer20 zone LED indication board40 zone LED indication boardUK mains cable2X-F1-FBCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Type A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)1 Loop intelligent analogue addressable control and indicating equipment with fire alarmrouting outputIncorporating the following units:2010-2-F1-MB Main control board2X-UI-FBUser interface control board with fire routing controls2010-2-PS-40 4A Power Supplyand as optional modules:092v/052010-2-NB2010-2-232-IB2010-2-LB2X-ZI-202X-ZI-402010-2-PS-C2Network boardInterface Board for External PrinterLoop expansion board20 zone LED indication board40 zone LED indication boardUK mains cableCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Type A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Type A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.18 Jan 2014 137

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products2X-F1-SC2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)1 Loop intelligent analogue addressable control and indicating equipment withScandinavian key switchIncorporating the following units:2010-2-F1-MB Main control board2X-UI-SCUser interface control board with fire routing controls2010-2-PS-40 4A Power Supplyand as optional modules:LPCB Ref.No.092v/052010-2-NB2010-2-LB2010-2-232-IB2X-ZI-202X-ZI-402010-2-PS-C22010-SKNetwork boardLoop expansion boardInterface Board for External Printer20 zone LED indication board40 zone LED indication boardUK mains cableScandinavian key and lock assemblyCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Type A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Type A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition2X-F21. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)2 Loop intelligent analogue addressable control and indicating equipmentIncorporating the following units:2010-2-F2-MB Main control board2X-UIUser interface control board2010-2-PS-40 4A Power Supplyand as optional modules:092v/062010-2-NB2010-2-LB2010-2-232-IB2X-ZI-202X-ZI-402010-2-PS-C2Network boardLoop expansion boardInterface Board for External Printer20 zone LED indication board40 zone LED indication boardUK mains cableCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm device(s)138 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsNotes:7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Type A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionLPCB Ref.No.2X-F2-FB1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available in the following language variants:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)2 Loop intelligent analogue addressable control and indicating equipmentIncorporating the following units:2010-2-F2-MB Main control board2X-UIUser interface control board2010-2-PS-40 4A Power Supplyand as optional modules:092v/062010-2-NB2010-2-LB2010-2-232-IB2X-ZI-202X-ZI-402010-2-PS-C2Network boardLoop expansion boardInterface Board for External Printer20 zone LED indication board40 zone LED indication boardUK mains cableCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Type A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition2X-F2-SC1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available in the following language variants:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)2 Loop intelligent analogue addressable control and indicating equipment withScandinavian key switchIncorporating the following units:2010-2-F2-MB Main control board2X-UI-SCUser interface control board with fire routing controls2010-2-PS-40 4A Power Supplyand as optional modules:092v/062010-2-NB2010-2-LB2010-2-232-IBNetwork boardLoop expansion boardInterface Board for External Printer18 Jan 2014 139

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products2X-ZI-202X-ZI-402010-2-PS-C22010-SK20 zone LED indication board40 zone LED indication boardUK mains cableScandinavian key and lock assemblyLPCB Ref.No.Certified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Types A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition2X-F1-S1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)1 Loop intelligent analogue addressable fire control panel in small cabinetIncorporating the following units:2010-2-F1-MB Main control board2X-UIUser interface control board2010-2-PS-40 4A Power Supply092v/07and as optional modules:2010-2-NB2010-2-LB2010-2-232-IB2X-ZI-242010-2-PS-C2Network boardLoop expansion boardInterface board for external printer24 zone LED indication boardUK mains cableCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm device(s)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition2X-F1-FB-SNotes:1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)1 Loop intelligent analogue addressable fire control panel with fire alarm routingequipment output in small cabinet092v/08140 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsLPCB Ref.No.Incorporating the following units:2010-2-F1-MB Main control board2X-UI-FBUser interface control board with fire routing controls2010-2-PS-40 4A Power Supplyand as optional modules:2010-2-NB2010-2-LB2010-2-232-IB2X-ZI-242010-2-PS-C2Network boardLoop expansion boardInterface board for external printer24 zone LED indication boardUK mains cableCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Types A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)2X-F1-SC-S1 Loop intelligent analogue addressable fire control panel with fire alarm routingequipment output and Scandinavian key in small cabinetIncorporating the following units:2010-2-F1-MB Main control board2X-UI-SCUser interface control board with fire routing controls2010-2-PS-40 4A Power Supplyand as optional modules:092v/092010-2-NB2010-2-LB2010-2-232-IB2X-ZI-242010-2-PS-C22010-SKNetwork boardLoop expansion boardInterface board for external printer24 zone LED indication boardUK mains cableScandinavian key and lock assemblyCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Types A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition18 Jan 2014 141

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products2X-F2-SNotes:1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)2 Loop intelligent analogue addressable fire control panel in small cabinetIncorporating the following units:2010-2-F2-MB Main control board2X-UIUser interface control board2010-2-PS-40 4A Power SupplyLPCB Ref.No.092v/10and as optional modules:2010-2-NB2010-2-LB2010-2-232-IB2X-ZI-242010-2-PS-C2Network boardLoop expansion boardInterface board for external printer24 zone LED indication boardUK mains cable2X-F2-FB-SCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)2 Loop intelligent analogue addressable fire control panel with fire alarm routingequipment output in small cabinetIncorporating the following units:2010-2-F2-MB Main control board2X-UI-FBUser interface control board with fire routing controls2010-2-PS-40 4A Power Supplyand as optional modules:092v/112010-2-NB2010-2-LB2010-2-232-IB2X-ZI-242010-2-PS-C2Network boardLoop expansion boardInterface board for external printer24 zone LED indication boardUK mains cableCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment142 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products7.10 Output to fire protection equipment (Types A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionLPCB Ref.No.2X-F2-SC-SNotes:1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)2 Loop intelligent analogue addressable fire control panel with fire alarm routingequipment output and Scandinavian keyIncorporating the following units:2010-2-F2-MB Main control board2X-UI-SCUser interface control board with fire routing controls2010-2-PS-40 4A Power Supply2010-SKScandinavian key and lock assemblyand as optional modules:092v/122010-2-NB2010-2-LB2010-2-232-IB2X-ZI-242010-2-PS-C2Network boardLoop expansion boardInterface board for external printer24 zone LED indication boardUK mains cable2X-FRCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Types A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)Addressable Fire Panel RepeaterIncorporating the following options with requirements from EN 54-2:7.13 Alarm counter8.4 Total loss of the power supply092v/R0118 Jan 2014 143

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products2X-FR-FB2X-FR-SC2X-FR-S2X-FR-SC-S2X-FR-FB-S8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionAddressable Fire Panel Repeater with Output to Fire Routing EquipmentIncorporating the following options with requirements from EN 54-2:7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionAddressable Fire Panel Repeater with Scandinavian KeyIncorporating the following options with requirements from EN 54-2:7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionAddressable Fire Panel Repeater in small cabinetIncorporating the following options with requirements from EN 54-2:7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionAddressable Fire Panel Repeater with fire routing equipment output and Scandinaviankey in small cabinetIncorporating the following options with requirements from EN 54-2:7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionAddressable Fire Panel Repeater with fire alarm routing equipment output in smallcabinetIncorporating the following options with requirements from EN 54-2:7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionLPCB Ref.No.092v/R02092v/R03092v/R04092v/R05092v/R06Certificate No: 092v-(cl-2) to EN54-2: 1997 + A1: 2006 and EN54-4: 1997 + A1: 2002 + A2: 2006Aritech - KFPCertificated ProductsKFP-AF11 Loop intelligent analogue addressable control and indicating equipmentIncorporating the following units:2010-2-F1-MB Main control boardKFP-A-UIUser interface control board2010-2-PS-40 4A Power Supplyand as optional modules:LPCB Ref.No.092v/052010-2-NB2010-2-LB2010-2-232-IB2X-ZI-20Network board2-Loop Node CardInterface Board for External Printer20 zone LED indication board144 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products2X-ZI-402010-2-PS-C240 zone LED indication boardUK mains cableLPCB Ref.No.KFP-AF1-FBCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Type A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)1 Loop intelligent analogue addressable control and indicating equipment with fire alarmrouting outputIncorporating the following units:2010-2-F1-MB Main control boardKFP-A-UI-FB User interface control board with fire routing controls2010-2-PS-40 4A Power Supplyand as optional modules:092v/052010-2-NB2010-2-232-IB2010-2-LB2X-ZI-202X-ZI-402010-2-PS-C2Network boardInterface Board for External PrinterLoop expansion board20 zone LED indication board40 zone LED indication boardUK mains cableCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Type A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Type A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)KFP-AF1-SC 1 Loop intelligent analogue addressable control and indicating equipment with 092v/0518 Jan 2014 145

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsScandinavian key switchIncorporating the following units:2010-2-F1-MB Main control boardKFP-A-UI-SC User interface control board with fire routing controls2010-2-PS-40 4A Power Supplyand as optional modules:LPCB Ref.No.2010-2-NB2010-2-LB2010-2-232-IB2X-ZI-202X-ZI-402010-2-PS-C22010-SKNetwork boardLoop expansion boardInterface Board for External Printer20 zone LED indication board40 zone LED indication boardUK mains cableScandinavian key and lock assemblyCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Type A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Type A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionKFP-AF21. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)2 Loop intelligent analogue addressable control and indicating equipmentIncorporating the following units:2010-2-F2-MB Main control boardKFP-A-UIUser interface control board2010-2-PS-40 4A Power Supplyand as optional modules:092v/062010-2-NB2010-2-LB2010-2-232-IB2X-ZI-202X-ZI-402010-2-PS-C2Network boardLoop expansion boardInterface Board for External Printer20 zone LED indication board40 zone LED indication boardUK mains cableCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Type A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition146 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsKFP-AF2-FB1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available in the following language variants:01 – Dutch, 02 – French, 03 – English (UK), 04 – German, 05 – Norwegian, 06– Swedish, 07 – Danish, 09 – Spanish, 10 – Italian,11 – Belgian, Dutch, 15 –Arabic, 18 – Polish, 19 – Turkish, 20 – Czech, 21 – Portuguese, 22 –Hungarian, 24 – Slovakian, 25 – Russian, 27- Lithuanian, 28 – Finish, 30 –Estonian, 31 – Latvian, 32 - Belgian French, 36 – French International, 45 –Romanian, 71 – Catalan, 99 - English (International)2 Loop intelligent analogue addressable control and indicating equipment with fire alarmrouting outputIncorporating the following units:2010-2-F2-MB Main control boardKFP-A-UI-FB User interface control board with fire routing controls2010-2-PS-40 4A Power Supplyand as optional modules:LPCB Ref.No.092v/062010-2-NB2010-2-LB2010-2-232-IB2X-ZI-202X-ZI-402010-2-PS-C2Network boardLoop expansion boardInterface Board for External Printer20 zone LED indication board40 zone LED indication boardUK mains cableKFP-AF2-SCCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Types A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 – Dutch, 02 – French, 03 – English (UK), 04 – German, 05 – Norwegian, 06– Swedish, 07 – Danish, 09 – Spanish, 10 – Italian,11 – Belgian, Dutch, 15 –Arabic, 18 – Polish, 19 – Turkish, 20 – Czech, 21 – Portuguese, 22 –Hungarian, 24 – Slovakian, 25 – Russian, 27- Lithuanian, 28 – Finish, 30 –Estonian, 31 – Latvian, 32 - Belgian French, 36 – French International, 45 –Romanian, 71 – Catalan, 99 - English (International)2 Loop intelligent analogue addressable control and indicating equipment withScandinavian key switchIncorporating the following units:2010-2-F2-MB Main control boardKFP-A-UI-SC User interface control board with fire routing controls2010-2-PS-40 4A Power Supplyand as optional modules:092v/062010-2-NB2010-2-LB2010-2-232-IB2X-ZI-202X-ZI-402010-2-PS-C22010-SKNetwork boardLoop expansion boardInterface Board for External Printer20 zone LED indication board40 zone LED indication boardUK mains cableScandinavian key and lock assembly18 Jan 2014 147

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsLPCB Ref.No.Certified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Types A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionKFP-AF1-S1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)1 Loop intelligent analogue addressable fire control panel in small cabinetIncorporating the following units:2010-2-F1-MB Main control boardKFP-A-UIUser interface control board2010-2-PS-40 4A Power Supply092v/07and as optional modules:2010-2-NB2010-2-LB2010-2-232-IB2X-ZI-242010-2-PS-C2Network boardLoop expansion boardInterface board for external printer24 zone LED indication boardUK mains cableCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm device(s)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionKFP-AF1-FB-SNotes:1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)1 Loop intelligent analogue addressable fire control panel with fire alarm routingequipment output in small cabinetIncorporating the following units:2010-2-F1-MB Main control boardKFP-A-UI-FB User interface control board with fire routing controls092v/08148 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products2010-2-PS-404A Power SupplyLPCB Ref.No.and as optional modules:2010-2-NB2010-2-LB2010-2-232-IB2X-ZI-242010-2-PS-C2Network boardLoop expansion boardInterface board for external printer24 zone LED indication boardUK mains cableKFP-AF1-SC-SCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Types A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)1 Loop intelligent analogue addressable fire control panel with fire alarm routingequipment output and Scandinavian key in small cabinetIncorporating the following units:2010-2-F1-MB Main control boardKFP-A-UI-SC User interface control board with fire routing controls2010-2-PS-40 4A Power Supplyand as optional modules:092v/092010-2-NB2010-2-LB2010-2-232-IB2X-ZI-242010-2-PS-C22010-SKNetwork boardLoop expansion boardInterface board for external printer24 zone LED indication boardUK mains cableScandinavian key and lock assemblyCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Types A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.18 Jan 2014 149

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsKFP-AF2-S2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)2 Loop intelligent analogue addressable fire control panel in small cabinetIncorporating the following units:2010-2-F2-MB Main control boardKFP-A-UIUser interface control board2010-2-PS-40 4A Power SupplyLPCB Ref.No.092v/10and as optional modules:2010-2-NB2010-2-LB2010-2-232-IB2X-ZI-242010-2-PS-C2Network boardLoop expansion boardInterface board for external printer24 zone LED indication boardUK mains cableKFP-AF2-FB-SCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)2 Loop intelligent analogue addressable fire control panel with fire alarm routingequipment output in small cabinetIncorporating the following units:2010-2-F2-MB Main control boardKFP-A-UI-FB User interface control board with fire routing controls2010-2-PS-40 4A Power Supplyand as optional modules:092v/112010-2-NB2010-2-LB2010-2-232-IB2X-ZI-242010-2-PS-C2Network boardLoop expansion boardInterface board for external printer24 zone LED indication boardUK mains cableCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Types A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter150 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionLPCB Ref.No.KFP-AF2-SC-SNotes:1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)2 Loop intelligent analogue addressable fire control panel with fire alarm routingequipment output and Scandinavian keyIncorporating the following units:2010-2-F2-MB Main control boardKFP-A-UI-SC User interface control board with fire routing controls2010-2-PS-40 4A Power Supply2010-SKScandinavian key and lock assemblyand as optional modules:092v/122010-2-NB2010-2-LB2010-2-232-IB2X-ZI-242010-2-PS-C2Network boardLoop expansion boardInterface board for external printer24 zone LED indication boardUK mains cableCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Types A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)KFP-AFRAddressable Fire Panel RepeaterIncorporating the following options with requirements from EN 54-2:7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition092v/R0118 Jan 2014 151

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsKFP-AFR-FBKFP-AFR-SCKFP-AFR-SKFP-AFR-SC-SKFP-AFR-FB-SAddressable Fire Panel Repeater with Output to Fire Routing EquipmentIncorporating the following options with requirements from EN 54-2:7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionAddressable Fire Panel Repeater with Scandinavian KeyIncorporating the following options with requirements from EN 54-2:7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionAddressable Fire Panel Repeater in small cabinetIncorporating the following options with requirements from EN 54-2:7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionAddressable Fire Panel Repeater with fire routing equipment output and Scandinaviankey in small cabinetIncorporating the following options with requirements from EN 54-2:7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionAddressable Fire Panel Repeater with fire alarm routing equipment output in smallcabinetIncorporating the following options with requirements from EN 54-2:7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionLPCB Ref.No.092v/R02092v/R03092v/R04092v/R05092v/R06Certificate No: 092v-(cl-2) to EN54-2: 1997 + A1: 2006 and EN54-4: 1997 + A1: 2002 + A2: 2006Ziton - ZP2Certificated ProductsZP2-F11 Loop intelligent analogue addressable control and indicating equipmentIncorporating the following units:2010-2-F1-MB Main control boardZP-UIUser interface control board2010-2-PS-40 4A Power Supplyand as optional modules:LPCB Ref.No.092v/052010-2-NB2010-2-LB2010-2-232-IB2X-ZI-202X-ZI-402010-2-PS-C2Network board2-Loop Node CardInterface Board for External Printer20 zone LED indication board40 zone LED indication boardUK mains cable152 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsZP2-F1-FBCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Type A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)1 Loop intelligent analogue addressable control and indicating equipment with fire alarmrouting outputIncorporating the following units:2010-2-F1-MB Main control boardZP2-UI-FBUser interface control board with fire routing controls2010-2-PS-40 4A Power Supplyand as optional modules:LPCB Ref.No.092v/052010-2-NB2010-2-232-IB2010-2-LB2X-ZI-202X-ZI-402010-2-PS-C2Network boardInterface Board for External PrinterLoop expansion board20 zone LED indication board40 zone LED indication boardUK mains cableZP2-F1-SCCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Type A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Type A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)1 Loop intelligent analogue addressable control and indicating equipment withScandinavian key switchIncorporating the following units:092v/0518 Jan 2014 153

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products2010-2-F1-MBZP2-UI-SC2010-2-PS-40Main control boardUser interface control board with fire routing controls4A Power SupplyLPCB Ref.No.and as optional modules:2010-2-NB2010-2-LB2010-2-232-IB2X-ZI-202X-ZI-402010-2-PS-C22010-SKNetwork boardLoop expansion boardInterface Board for External Printer20 zone LED indication board40 zone LED indication boardUK mains cableScandinavian key and lock assemblyCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Type A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Type A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionZP2-F21. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)2 Loop intelligent analogue addressable control and indicating equipmentIncorporating the following units:2010-2-F2-MB Main control boardZP-UIUser interface control board2010-2-PS-40 4A Power Supplyand as optional modules:092v/062010-2-NB2010-2-LB2010-2-232-IB2X-ZI-202X-ZI-402010-2-PS-C2Network boardLoop expansion boardInterface Board for External Printer20 zone LED indication board40 zone LED indication boardUK mains cableCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Type A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.154 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsZP2-F2-FB3. Available in the following language variants:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)2 Loop intelligent analogue addressable control and indicating equipment with fire alarmrouting outputIncorporating the following units:2010-2-F2-MB Main control boardZP2-UI-FBUser interface control board with fire routing controls2010-2-PS-40 4A Power Supplyand as optional modules:LPCB Ref.No.092v/062010-2-NB2010-2-LB2010-2-232-IB2X-ZI-202X-ZI-402010-2-PS-C2Network boardLoop expansion boardInterface Board for External Printer20 zone LED indication board40 zone LED indication boardUK mains cableCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Types A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionZP2-F2-SC1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)2 Loop intelligent analogue addressable control and indicating equipment withScandinavian key switchIncorporating the following units:2010-2-F2-MB Main control boardZP2-UI-SCUser interface control board with fire routing controls2010-2-PS-40 4A Power Supplyand as optional modules:092v/062010-2-NB2010-2-LB2010-2-232-IB2X-ZI-202X-ZI-402010-2-PS-C22010-SKNetwork boardLoop expansion boardInterface Board for External Printer20 zone LED indication board40 zone LED indication boardUK mains cableScandinavian key and lock assemblyCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm device(s)18 Jan 2014 155

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsNotes:7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Types A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionLPCB Ref.No.ZP2-F1-S1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)1 Loop intelligent analogue addressable fire control panel in small cabinetIncorporating the following units:2010-2-F1-MB Main control boardZP-UIUser interface control board2010-2-PS-40 4A Power Supplyand as optional modules:2010-2-NBNetwork board2010-2-LBLoop expansion board2010-2-232-IB Interface board for external printer2X-ZI-2424 zone LED indication board2010-2-PS-C2 UK mains cableCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm device(s)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition092v/07ZP2-F1-FB-SNotes:1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)1 Loop intelligent analogue addressable fire control panel with fire alarm routingequipment output in small cabinetIncorporating the following units:2010-2-F1-MB Main control boardZP2-UI-FBUser interface control board with fire routing controls2010-2-PS-40 4A Power Supplyand as optional modules:092v/08156 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products2010-2-NB2010-2-LB2010-2-232-IB2X-ZI-242010-2-PS-C2Network boardLoop expansion boardInterface board for external printer24 zone LED indication boardUK mains cableLPCB Ref.No.ZP2-F1-SC-SCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Types A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)1 Loop intelligent analogue addressable fire control panel with fire alarm routingequipment output and Scandinavian key in small cabinetIncorporating the following units:2010-2-F1-MB Main control boardZP2-UI-SCUser interface control board with fire routing controls2010-2-PS-40 4A Power Supplyand as optional modules:092v/092010-2-NB2010-2-LB2010-2-232-IB2X-ZI-242010-2-PS-C22010-SKNetwork boardLoop expansion boardInterface board for external printer24 zone LED indication boardUK mains cableScandinavian key and lock assemblyCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Types A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,18 Jan 2014 157

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsZP2-F2-S24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)2 Loop intelligent analogue addressable fire control panel in small cabinetIncorporating the following units:2010-2-F2-MB Main control boardZP-UIUser interface control board2010-2-PS-40 4A Power SupplyLPCB Ref.No.092v/10and as optional modules:2010-2-NB2010-2-LB2010-2-232-IB2X-ZI-242010-2-PS-C2Network boardLoop expansion boardInterface board for external printer24 zone LED indication boardUK mains cableZP2-F2-FB-SCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)2 Loop intelligent analogue addressable fire control panel with fire alarm routingequipment output in small cabinetIncorporating the following units:2010-2-F2-MB Main control boardZP2-UI-FBUser interface control board with fire routing controls2010-2-PS-40 4A Power Supplyand as optional modules:092v/112010-2-NB2010-2-LB2010-2-232-IB2X-ZI-242010-2-PS-C2Network boardLoop expansion boardInterface board for external printer24 zone LED indication boardUK mains cableCertified with the following options with requirements from EN 54-2:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Types A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition158 18 Jan 2014

Certificated ProductsNotes:PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTLPCB Ref.No.ZP2-F2-SC-S1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)2 Loop intelligent analogue addressable fire control panel with fire alarm routingequipment output and Scandinavian keyIncorporating the following units:2010-2-F2-MB Main control boardZP2-UI-SCUser interface control board with fire routing controls2010-2-PS-40 4A Power Supply2010-SKScandinavian key and lock assemblyand as optional modules:092v/122010-2-NB2010-2-LB2010-2-232-IB2X-ZI-242010-2-PS-C2Network boardLoop expansion boardInterface board for external printer24 zone LED indication boardUK mains cableZP2-FRZP2-FR-FBCertified with the following options with requirements from EN 54-2:Notes:7.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.9.2 Alarm confirmation input from fire alarm routing equipment7.10 Output to fire protection equipment (Types A, B and C)7.11 Delays to outputs7.12 Dependencies on more than one alarm signal (Types A, B and C)7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test condition1. This product approval does not constitute compliance with the fire detectionand alarm systems requirements of EN 54-13.2. Scope of approval does not include the operation of the network functionality.3. Available with the following language kits:01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 -Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 -Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian,24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 -Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 -Catalan, 99 - English (International)Addressable Fire Panel RepeaterIncorporating the following options with requirements from EN 54-2:7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionAddressable Fire Panel Repeater with Output to Fire Routing EquipmentIncorporating the following options with requirements from EN 54-2:7.13 Alarm counter8.4 Total loss of the power supply092v/R01092v/R0218 Jan 2014 159

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsZP2-FR-SCZP2-FR-SZP2-FR-SC-SZP2-FR-FB-S8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionAddressable Fire Panel Repeater with Scandinavian KeyIncorporating the following options with requirements from EN 54-2:7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionAddressable Fire Panel Repeater in small cabinetIncorporating the following options with requirements from EN 54-2:7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionAddressable Fire Panel Repeater with fire routing equipment output and Scandinaviankey in small cabinetIncorporating the following options with requirements from EN 54-2:7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionAddressable Fire Panel Repeater with fire alarm routing equipment output in smallcabinetIncorporating the following options with requirements from EN 54-2:7.13 Alarm counter8.4 Total loss of the power supply8.9 Output to fault warning routing equipment9.5 Disablement of addressable points10 Test conditionLPCB Ref.No.092v/R03092v/R04092v/R05092v/R06UTC Fire & Security Inc. Trading as Edwards Systems Technology8985 Town Center Parkway, Bradenton, Florida FL34202, USATel: 941 739-42228Website: www.fs.utc.comCertificate No: 262z-(cl-2) to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006.Certificate No: 262ab to EN 54-2:1997+A1:2006 , EN 54-4::1997+A1:2002+A2:2006 and EN 54-16:2008Control and indicating equipmentCertificated ProductsEST3Incorporating as modular units:LPCB Ref.No.262ab/01AnnunciatorsEST3 24 LED Annunciators3-24Y 3-24Y Annunciator Bill of Materials3-24Y-E3-24Y Annunciator Bill of Materials3-24R 3-24R Annunciator Bill of Materials3-24R-E3-24R Annunciator Bill of Materials3-24G 3-24G Annunciator Bill of Materials3-24G-E3-24G Annunciator Bill of Materials3-12RY3-12RY Annunciator Bill of Materials3-12RY-E3-12RY Annunciator Bill of Materials160 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsEST3 18 LED Annunciators3-6/3S1G2Y 3-6/3S1G2Y Annunciator Bill of Materials3-6/3S1G2Y-E 3-6/3S1G2Y Annunciator Bill of Materials3-6/3S1GYR 3-6/3S1GYR Annunciator Bill of Materials3-6/3S1GYR-E 3-6/3S1GYR Annunciator Bill of Materials3-6/3S2RY 3-6/3S2RY Annunciator Bill of Materials3-6/3S2RY-E 3-6/3S2RY Annunciator Bill of Materials130322-03 3-6/3S2RY - Red-yellow-red, 6 triads - PCBTH level BOMEST3 Control-Display Switch/LEDs3-12SY3-12SY 12 Switch-Yellow Bill of Materials3-12SY-E 3-12SY 12 Switch-Yellow Bill of Materials3-12SR3-12SR 12 Switch-Red Bill of Materials3-12SR-E 3-12SR 12 Switch-Red Bill of Materials3-12SG3-12SG 12 Switch-Green Bill of Materials3-12SG-E 3-12SG 12 Switch-Green Bill of Materials3-12/S1GY 3-12/S1GY 12 Switch-Green/Yellow3-12/S1GY-E 3-12/S1GY 12 Switch-Green/Yellow3-12/S1RY 3-12/S1RY 12 Switch-Red/Yellow Bill of Materials3-12/S1RY-E 3-12/S1RY 12 Switch-Red/Yellow Bill of Materials3-12/S2Y3-12/S2Y - 12 Switches - 24 Yellow Bill of Materials3-12/S2Y-E 3-12/S2Y - 12 Switches - 24 Yellow Bill of Materials3-12/S2R3-12/S2R - 12 Switches - 24 Red Bill of Materials3-12/S2R-E 3-12/S2R - 12 Switches - 24 Red Bill of MaterialsLoop Controller Modules3-SSDC1-E Signature (Single), driver controller module3-SDDC1-E Signature (Dual), driver controller module3-AADC1-E System Sensor driver control module3-SDC1-E Signature, driver controller module3-EAC-EEdwards Analog Driver Card3-EASC-E Edwards (Single) Analogue driver controller module3-EADC-E Edwards (Dual) Analogue driver controller moduleLPCB Ref.No.Power Supplies3-PPS/M-230-E3-BPS/M-230-E3-BBC/M-230-E3-PSMON-E3-BPMON-E3-BBCMON-E3-CPU33-CPU3-E3-LDSM3-LDSM-E3-IDC 8/43-IDC 8/4-E3-LCD3-LCD-E3-LRMF3-RS485A3-RS485A-E3-RS485B3-RS485B-E3-RS2323-RS232-EEFM-2EFM-10Primary Power Supply 230VBooster Power Supply 230VBooster, Battery Charger Power Supply 230VPrimary Power Supply MonitorBooster Power Supply MonitorBooster, Battery Charger MonitorCentral Processor UnitCentral Processor UnitAnnunciator strip support moduleAnnunciator strip support moduleInitiating Device Circuits/NACSInitiating Device Circuits/NACSEST3 Main Display LCD, user interfaceEST3 Main Display LCD, user interfaceLocal Rail Module FillerData Communication, Class AData Communication, Class AData Communication, Class BData Communication, Class BSerial Communications Card (Printer, etc)Serial Communications Card (Printer, etc)Data Communications Filter - 2 CircuitsData Communications Filter - 10 CircuitsCabinets & Door Assemblies3-CAB7B-E Cabinet Back Box 3-CAB7B-E3-CAB14B-E Cabinet Back Box 3-CAB14B-E3-CAB21B-E Cabinet Back Box 3-CAB21B-ELobby Cabinet Assemblies3-CAB7D(R)-E 3-CAB7D-E Door Assembly - (R) indicates red3-CAB14D(R)-E 3-CAB14D-E Door Assembly - (R) indicates red3-CAB21D(R)-E 3-CAB21D-E Door Assembly - (R) indicates redBattery Cabinets3-RCC7R-EEST3 - CAB 7 Module Chassis - Remote Closet Cabinet18 Jan 2014 161

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products3-RCC14R-E3-RCC21R-E3-BTSEN-EBC-13-TAMP3-TAMPRCCEST3 - CAB 14 Module Chassis - Remote Closet CabinetEST3 - CAB 21 Module Chassis - Remote Closet CabinetRemote battery cabinet interlace, temperature sensingBattery CabinetCabinet Tamper Switch for 3-CAB7/14/21Tamper Switch for 3-RCC CabinetLPCB Ref.No.EST3 RepeaterEST3Audio & Telephone Common Controls - Chassis Assemblies3-CHAS7EST3 - CHASSIS 7 Module - Chassis Assy for 7 LRMs3-CHAS7-E EST3 - CHASSIS 7 Module - Chassis Assy for 7 LRMs3-CHASS4 EST3 -CHASSIS 4 Mod - Chassis Assy for REMIC & 4 LRMs3-CHASS4-E EST3 -CHASSIS 4 Mod - Chassis Assy for REMIC & 4 LRMs3-ASU-EAudio Source Unit with a 3-Chassis - European3-ASU/4-E Audio Source Unit with 4 LRM slots - European3-ASUMX/100 100 minute extended audio memory card3-ASU/FT-EN Audio Source Unit with Fire Fighter Tele - European3-FTCU-E Firefighter Telephone Control Unit3-ZA20A20 watt Zone Amplifier, Class A3-ZA20B20 watt Zone Amplifier, Class B3-ZA20B-E 20 watt Zone Amplifier, Class B3-ZA40A40 watt Zone Amplifier, Class A3-ZA40A-E 40 watt Zone Amplifier, Class A3-ZA40B40 watt Zone Amplifier, Class B3-ZA40B-E 40 watt Zone Amplifier, Class B3-BATSBattery Shelf for Single 65AH Cell3-CBLKIT1 EST3 Extended Rail Cable Kit3-CPUDR EST3 CPU Door KitIncorporating as modular units:3-ANNCPU3 Remote Annunciator CPU with a 3-LCD3-ANNSM Remote (repeater) Annunciator Support Module3-LCDANN-E LCD Display and User Interface for Remote AnnunciatorAnnunciator Back Boxes and Doors Assemblies3-10ANN-E Remote Annunciator Back Box, 10 slots, with Door3-10ANN/D-E Inner/Outer Door Assembly for 3-10ANN-E10ANN/BFlush BackBox for 3-10ANN-E10ANN/B-S Surface BackBox for 3-10ANN-E3-6ANN-E Remote Annunciator Back Box, 6 slots, with Door3-6ANN/D-E Inner/Outer Door Assembly for 3-6ANN-E6ANN/BFlush BackBox for 3-6ANN-E6ANN/B-S Surface BackBox for 3-6ANN-E3-4ANN-E Remote Annunciator Back Box, 4 slots, with Door3-4ANN/D-E Inner/Outer Door Assembly for 3-4ANN-E4ANN/BFlush BackBox for 3-4ANN-E4ANN/B-S Surface BackBox for 3-4ANN-E3-RLCM/D-E EST3 Inner/Outer Door Assembly - EuroRLCM/BRLCM Flush BackBoxRLCM/B-S RLCM Surface BackBox3-REMICA-E Remote paging Microphone - European3-ANNCPU3 Remote Annunciator CPU with a 3-LCD3-ANNSM Remote (repeater) Annunciator Support Module3-LCDANN-E LCD Display and User Interface for Remote AnnunciatorIncorporating as modular units:3-SSDC1-E Signature (Single), driver controller module3-SDDC1-E Signature (Dual), driver controller module3-AADC1-E System Sensor driver control module3-EASC-E Edwards (Single) Analogue driver controller module3-EADC-E Edwards (Dual) Analogue driver controller module3-PPS/M-230-E Primary Power Supply3-BPS/M-230-E Booster Power Supply3-BBC/M-230-E Booster Battery Charger Power Supply3-CPU3Central Processor UnitEFM-2 Data Communications Filter3-CAB7-E 7 Slot Cabinet3-CAB14-E 14 Slot Cabinet3-CAB21-E 21 Slot Cabinet3-CAB7D(R)-E Door for 7 Slot Cabinet, (R) indicates red3-CAB14D(R)-E Door for 14 Slot Cabinet, (R) indicates red3-CAB21D(R)-E Door for 21 Slot Cabinet, (R) indicates red3-RCC7R-E Small Remote Battery Cabinet262ab/R01262z/01162 18 Jan 2014

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated Products3-RCC14R-E Medium Remote Battery Cabinet3-RCC21R-E Large Remote Battery Cabinet3-LCDLiquid Crystal Display, user interface3-BATSEN-E Remote battery cabinet interface, temperature sensing3-BATSEN Remote battery cabinet interface3-BATS Battery Shelf3-RS485A Data Communication, Class A3-RS485B Data Communication, Class B3-RS232Serial Communications Card (Printer, etc)3-PSMON Primary Power Supply Monitor3-IDC8/4 Initiating Device Circuits/NACS3-24R 24, Red3-24Y 24, Yellow3-24G 24, Green3-12RY Red-over-yellow pairs3-12SR 12 Switches. Red3-12SY 12 Switches. Yellow3-12SG 12 Switches. Green3-12/S1GY 12 Switches. Green over-yellow pairs3-12/S1RY 12 Switches. Red over-yellow pairs3-12/S2Y 24, Yellow, 12 Switches3-12/S2R 24, Red, 12 Switches3-6/3S1G2Y Green-over-yellow-over-yellow triads, 6 triads3-6/3S1GYR Green-over-yellow-over-red triads, 6 triads3-6/3S2RY Red-over-yellow-over-red triads, 6 triads3-BBCMON Booster, Battery Charger Monitor3-BPSMON Booster Power supply Monitor3-LDSMAnnunciator strip support module3-LRMF Local Rail Module Filler3-RCIC ASU Interconnect power and rail communication unitLPCB Ref.No.EST3 RepeaterCertified with the following options with requirements from EN 54 Part 2:7.8 Output to fire alarm devices7.13 Alarm counter8.3 Fault Signals from points10 Test conditionIncorporating as modular units:3-RS485BA Remote Annunciator RS485 Communications.3-ANNCPU3 Remote Annunciator CPU3-LCDANN-E LCD Display and User Interface for Remote Annunciator3-ANNSM Remote (repeater) Annunciator Support Module3-REMICA Remote paging Microphone.3-24Y 24, Yellow.3-12/S1GY 12 Switches. Green over-yellow pairs.3-4ANN-E(R) Remote Annunciator Back Box, 4 slots, with Door (R)indicates red3-6ANN-E(R) Remote Annunciator Back Box, 6 slots, with Door (R)indicates red3-10ANN-E(R) Remote Annunciator Back Box, 10 slots, with Door (R)indicates red262z/01RXtralis Pty Limited4 North Drive, Virginia Park, 236-262 East Boundary Road, East Bentleigh, Victoria 3165, AustraliaTel: +61 3 9936 7001, +44 (0)1442 242330 • Fax: +61 3 9936 7201E-mail: marketing-emea@xtralis.com • Website: www.xtralis.comCertificate No: 305f to EN 54-4: 1997 + A1: 2002 + A2: 2006Power Supply UnitCertificated ProductsLPCB Ref.No.VPS-215-U Power Supply Unit 305f/01Note: The unit is not intended to supply power to Fire Alarm Control Panels18 Jan 2014 163

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsLPCB Ref.No.VPS-220-U Power Supply Unit 305f/02Note: The unit is not intended to supply power to Fire Alarm Control Panels516-018-407 Power Supply Unit 305f/03Note: The unit is not intended to supply power to Fire Alarm Control PanelsZarja Elektronika d.o.oPolceva, Pot 1, 1240 Kamnik, SloveniaTel: +386 1831 7488 • Fax: +386 1831 7551E-mail: info@zarja.com • Website: www.zarja.comCertificate No: 1124a to EN54-2: 1997 + A1: 2006 and EN54-4: 1997 + A1: 2002 + A2: 2006Control and indicating equipmentCertificated ProductsNJP-400AAnalogue addressable and Conventional control and indicating equipment.LPCB Ref.No.1124a/01Incorporating the following units:UPMO 400 Control and display moduleNAMO 400 Power supply moduleCPMO 400 Central processor moduleOptional modules:LIMO-Ap 400 Line module ApolloLIMO-Ko 400 Line module conventionalVIMO 400 Input output moduleIZMO 400 Output moduleMRMO 400 Network moduleEng_pack English language kitSlo_pack Slovenian language kitNJP-401ACertified with the following options with requirements from EN 54-2:19977.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.10.1 Output to fire protection equipment type A7.10.2 Output to fire protection equipment type B7.11 Delays to the auctioning of outputs8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNotes:1) Scope of approval does not include the operation of the network functionality.2) This product approval does not constitute compliance with the fire detectionand alarmsystems requirements of EN54-13.Analogue addressable and Conventional control and indicating equipment.Incorporating the following units:UPMO 400 Control and display moduleNAMO 401 Power supply moduleCPMO 400 Central processor moduleOptional modules:LIMO-Ap 400 Line module ApolloLIMO-Ko 400 Line module conventionalVIMO 400 Input output module1124a/02164 18 Jan 2014

Certificated ProductsIZMO 400 Output moduleMRMO 400 Network moduleEng_pack English language kitSlo_pack Slovenian language kitPART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTLPCB Ref.No.Certified with the following options with requirements from EN 54-2:19977.8 Output to fire alarm device(s)7.9.1 Output to fire alarm routing equipment7.10.1 Output to fire protection equipment type A7.10.2 Output to fire protection equipment type B7.11 Delays to the auctioning of outputs8.3 Fault signals from points9.5 Disablement of each address point10 Test conditionNotes:1) Scope of approval does not include the operation of the network functionality.2) This product approval does not constitute compliance with the fire detectionand alarmsystems requirements of EN54-13.Zeta Alarm Systems by GLT Exports LimitedDetection House, 72-78 Morfa Road, Swansea SA1 2EN, United KingdomTel: +44 (0)1792 455175 • Fax: +44 (0)1792 455176E-mail: ghassan@gltexports.com • Website: www.gltexports.comCertificate No: 330d to EN 54: Part 2 and 4: 1997Certificated ProductsLPCB Ref.No.Premier SX 2 zone conventional control and indicating equipment 330d/02Premier SX 4 zone conventional control and indicating equipment 330d/03Premier SX 8 zone conventional control and indicating equipment 330d/05Certified with the following options with requirements from EN 54: Part 2:7.8 Output to fire alarm devices7.11 Delays to the actioning of outputs10 Test conditionPremier MX 22 zone conventional control and indicating equipment330d/06Incorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface (option)Certified with the following options from EN 54: Part 27.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test conditionPremier MX 44 zone conventional control and indicating equipment330d/07Incorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface (option)Certified with the following options from EN 54: Part 27.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test conditionPremier MX 88 zone conventional control and indicating equipmentIncorporating as modular units:C1627 Mother board330d/0818 Jan 2014 165

PART 1: SECTION 3CONTROL AND INDICATING EQUIPMENTCertificated ProductsPremier MX 16Premier MX 32Premier MX Repeater 8Premier MX Repeater 16Premier MX Repeater 32C1628 Display boardC1631 Repeater interface (option)Certified with the following options from EN 54: Part 27.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition16 zone conventional control and indicating equipmentIncorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface (option)Certified with the following options from EN 54: Part 27.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition32 zone conventional control and indicating equipmentIncorporating as modular units:C1627 Mother boardC1629 Display boardC1632 16 Zone expansion boardC1652 5A Power Supply boardC1631 Repeater interface (option)Certified with the following options from EN 54: Part 27.8 Output to fire alarm devices7.9 Output to fire routing equipment7.10 Output to automatic fire protection equipment7.11 Delays to outputs8.9 Output to fault warning equipment10 Test condition8 zone conventional repeater unitIncorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface16 zone conventional repeater unitIncorporating as modular units:C1627 Mother boardC1628 Display boardC1631 Repeater interface32 zone conventional repeater unitIncorporating as modular units:C1627 Mother boardC1629 Display boardC1631 Repeater interfaceLPCB Ref.No.330d/09330d/10330d/R01330d/R02330d/R03Certificate No: 018c to EN 54-2 and 4:1997Certificated ProductsPrem1er AL4 loop analogue addressable control and indicating equipmentIncorporating:A1579 MotherboardA1580 Display boardA1585 Loop cardsA1584 230V AC power supply control cardA1599 Printer boardCertified with the following options from EN 54-2: 19977.8 Output to fire alarm devices7.11 Delays to outputs8.3 Fault signals from points9.5 Disablement of addressable points10 Test conditionLPCB Ref.No.018c/01166 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSThere are many types of detectors on the market designed to work on different principles and fire parameters(e.g. smoke, flame radiation, convective heat etc). The selection of a detector for a particular area orapplication should be based on a number of factors including the following:The nature of the fire hazardThe speed of response requiredThe need to minimize false alarmsThere are other factors to be taken into account such as architecture of the building, ease of maintenance andcost, etc.Guidance on the selection of appropriate types of detectors should be sought from the applicable installationrule or code of practice (e.g. BS 5839-1). Where a particular type of detector is not covered by the installationrule or code of practice then guidance should be sought from the manufacturer’s literature. In any case,account should be given to the notes or limitations given with the listed detector in this section.This section lists fire detectors approved for use in fire detection and fire alarm systems in buildings.The initial approval and continued approval processes for detectors are outlined in scheme document SD021.The list includes detectors certified to recognised standards or to special test schedules which are developedby LPCB for detector types where suitable standards are not available or were not available at the time of theevaluation.Products listed in this section have been approved to: EN 54-5: 2000 Heat detectors - point detectors EN 54-5: 2000 + A1: 2002 Heat detectors - point detectors EN 54-7: 2000 Smoke detectors - point detectors using scattered light, transmitted light or ionisation EN 54-7 :2000 +A1: 2002 and A2: 2006 Smoke detectors - point detectors using scattered light, transmitted light or ionisation EN 54-10: 2002 Flame detectors - point detectors EN 54-10: 2002 + A1: 2005 Flame detectors - point detectors EN 54-12: 2002 Smoke detectors - line detectors using an optical light beam EN 54-20: 2006 Aspirating smoke detectors EN 54-25: 2008 Components using radio links ISO7240-5: 2003 Point -type heat detectors ISO7240-6: 2004 Carbon monoxide fire detectors using electro-chemical cells ISO7240-7: 2003 Point-type smoke detectors using scattered light, transmitted light or ionization ISO7240-12: 2005 Line type smoke detectors using transmitting light beam ISO7240-15: 2004 Multisensor fire detectors ISO 7240-6: 2008 Carbon monoxide fire detectors using electro-chemical cells and heat sensors. CEA 4021: 1999 Requirements and test methods for multisensor detectors, which respond to smokeand heat, and smoke detectors with more than one smoke sensor CEA 4021: 2003 Requirements and test methods for multisensor detectors, which respond to smokeand heat, and smoke detectors with more than one smoke sensor LPS 1265-1.1: 2005 Requirements and Testing Procedures for the LPCB Approval and Listing ofCarbon Monoxide Fire Detectors Using Electrochemical Cells LPS 1274-1.0: 2005 Testing Procedures for the LPCB Approval and Listing of Carbon Monoxide/Heat Multisensor Fire Detectors Using Electrochemical Cells LPS 1279-1.0: 2006 Testing Procedures for the LPCB Approval and Listing of Point Multisensor FireDetectors using Optical or Ionization Smoke Sensors and Electrochemical Cell CO Sensors and,optionally, Heat Sensors LPS 1280-1.0: 2007 Testing Procedures for the LPCB Approval and Listing of Duct Smoke Detectorsusing Point Smoke Detectors18 Jan 2014 167

PART 1: SECTION 4.1COMMERCIAL DETECTORSApproval can also be obtained for other detection principles not detailed above. In such circumstances, LPCBcan develop test criteria to evaluate products, which in time may be used for the development of standards.Audit:Regular product auditing and regular factory inspections are carried out by LPCB ensuring high manufacturingstandards and continued compliance with the applicable product standard.Notes:1. EN 54-5: 2000 is now a harmonised standard for the Construction Products Directive and CE marking isrequired for most of the European market since 30 June 2005. It is therefore recommended that heatdetectors are certificated to EN 54-5: 2000 + A1: 20022. EN 54-7: 2000 is now a harmonised standard for the Construction Products Directive and CE marking isrequired for most of the European market since 30 June 2005. It is therefore recommended that smokedetectors are certificated to EN 54-7: 2000 + A1: 2002 and A2: 20063. EN 54-10: 2002 is now a harmonised standard for the Construction Products Directive and CE marking isrequired for most of the European market since 1 September 2008. It is therefore recommended thatflame detectors are certificated to EN 54- 10: 2002 + A1: 20054. EN 54-12: 2002 is now a harmonised standard for the Construction Products Directive and CE marking isrequired for most of the European market since 31 December 2005. It is therefore recommended thatbeam detectors are certificated to EN 54- 12: 20025. EN 54-25: 2008 is now a harmonised standard for the Construction Products Directive and CE marking isrequired for most of the European market since 1 March 2011. It is therefore recommended that radio linkcomponents are certificated to EN 54- 25: 20086. CEA 4021: 2003 supersedes CEA 4021: 1999 which was withdrawn in June 2003 (i.e. at the same timeas the national versions of EN 54-5: 1976 and EN 54-7: 1982 were officially withdrawn and replaced withEN 54- 5: 2000 and EN 54-7: 2000).7. EN 54-20: 2006 supersedes CEA 4022: 1999 which should have been withdrawn in 2009.EN 54-20: 2006 is now a harmonised standard for the Construction Products Directive and CE marking isrequired for most of the European market since 1 July 2009. It is therefore recommended that aspiratingdetectors are certificated to EN 54-20: 2006.8. The bases with which a detector has been evaluated and shown to meet the relevant standards are listedwith each detector. Bases are not approved/certificated in their own right unless they are combined withanother device (e.g. short circuit isolator or sounder).9. Since LPCB uses national and international standards for the listing of products, in some instances therequirements of these standards may conflict with the recommendations of local codes of practice. Werecommend that specifiers seek advice from the relevant local authorities and amend their specificationsaccordingly.ADI InternationalADI International Espana, C/Vivero 5, 28040 Madrid, SpainTel: +34 91 102 590 • Fax: +34 91 535 0081E-mail: alvazquez@ademco.es • Website: www.ademco.esCertificate No: 199u to EN 54-12: 2002Beam DetectorsCertificated ProductsLPCB Ref.No.8200R Conventional optical beam detector 199u/01Note:168 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLPCB Ref.No.1. Meets the requirements for EN 54-12: 2002 at sensitivity levels 1, 2, 3, 4 & Acclimatelevels 1 & 28200RS Conventional optical beam detector with self test facility 199u/02Note:1. Meets the requirements for EN 54-12: 2002 at sensitivity levels 1, 2, 3, 4 & Acclimatelevels 1 & 2Advanced Electronics Limited34 Moorland Way, Nelson Park, Cramlington, Northumberland NE23 1WE, United KingdomTel: +44 (0)1670 707 111 • Fax: +44 (0)1670 707 222E-mail: ksewell@advel.co.uk • Website: www.Advel.co.ukCertificate No: 928a-(cl-5) to EN54-5: 2000 + A1: 2002 and EN 54 -17: 2005Certificate No: 928d-(cl-5) to EN 54-5: 2000 + A1: 2002Certificate No: 928j-(cl-1) to EN 54-5: 2000 + A1: 2002 and EN 54-25: 2008Point Heat DetectorsCertificated Products20-V350-ADVAnalogue addressable Class P heat detector with short circuit isolator (20-AB100-ADVbase)LPCB Ref.No.928a/01Note:1. Meets the requirements of EN 54-5 for Class A1R and Class B.20-LV350-ADVAnalogue addressable Class P, temperature detector (20-VB100-ADV and 20-AB100- 928d/01ADV bases)Note:1. Meets the requirements of EN 54-5 for Class A1R and Class B.20-AS3500-ADVConventional Class P, heat detector (20-AB100-ADV, 20-ABR100-ADV,928d/0220-ABDR100-ADV, 20-ABS100-ADV, 20-ABSR100-ADV and 20-ABSRD100-ADV)Note:1. Meets the requirements of EN 54-5 for Class A1R and Class B.20-SG350-ADV Wireless heat detector (WAB100 base) 928j/01Notes:1. Meets the requirements of EN 54-5 for Class A1R2. The device must be used with the following batteries only: CR123A (3 Vdc) - main battery CR2032A (3 Vdc) - secondary batteryBases20-AB100-ADV20-VB100-ADV20-ABR100-ADV20-ABDR100-ADV20-ABS100-ADV20-ABSR100-ADV20-ABSRD100-ADVWAB100Mounting baseMounting base (with link resistor)Universal adaptor base with resistorUniversal adaptor base with resistor and Schottky diodeDeep adaptor baseDeep adaptor base with resistorDeep adaptor base with resistor and Schottky diodeWireless adaptor baseCertificate No: 928b-(cl-5) to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54 -17: 2005Certificate No: 928e-(cl-5) to EN 54-7: 2000 + A1: 2002 + A2: 2006Point Smoke DetectorsCertificated Products20-V100-ADVAnalogue addressable photoelectric smoke detector with short circuit isolator (20-AB100-ADV base)LPCB Ref.No.928b/01Note:1. Meets the requirements of EN 54-7 at the following sensitivity settings:18 Jan 2014 169

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated Products20-LV100-ADV20-AS1000-ADVOptical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowAnalogue addressable optical smoke detector (20-VB100-ADV and 20-AB100-ADVbases)Note:1. Meets the requirements of EN 54-7 at the following sensitivity settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowConventional photo smoke detector (20-AB100-ADV, 20-ABR100-ADV, 20-ABDR100-ADV, 20-ABS100-ADV, 20-ABSR100-ADV and 20-ABSRD100-ADV)LPCB Ref.No.928e/01928e/02Bases20-AB100-ADV20-VB100-ADV20-ABR100-ADV20-ABDR100-ADV20-ABS100-ADV20-ABSR100-ADV20-ABSRD100-ADVMounting baseMounting base (with link resistor)Universal adaptor base with resistorUniversal adaptor base with resistor and Schottky diodeDeep adaptor baseDeep adaptor base with resistorDeep adaptor base with resistor and Schottky diodeCertificate No: 928c-(cl-5) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54 -17: 2005 & CEA4021: 2003Certificate No: 928f-(cl-5) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003Multi-sensor detectorsCertificated Products20-V200-ADVAnalogue addressable Class P heat and photoelectric smoke multi-sensor detector withshort circuit isolator (20-AB100-ADV base)LPCB Ref.No.928c/01Notes:1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the followingsettings:Multi criteria level 1 (most sensitive) - thermally enhancedsmoke detection with Class A1 heat responseMulti criteria level 2 - thermally enhanced smoke detection withClass A1 heat responseMulti criteria level 3 - thermally enhanced smoke detection withClass A1 heat responseMulti criteria level 4 (least sensitive) - thermally enhancedsmoke detection with Class A1 heat response2. Meets the requirements of EN 54-5 (Class A1R) at the following settings:Class A1R heat only response3. Meets the requirements of EN 54-7 at the following settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - Low20-LV200-ADVAnalogue addressable photo thermal multisensor (20-VB100-ADV and 20-AB100-ADVbases)Notes:1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the followingsettings:Multi criteria level 1 (most sensitive) - thermally enhancedsmoke detection with Class A1 heat responseMulti criteria level 2 - thermally enhanced smoke detection withClass A1 heat responseMulti criteria level 3 - thermally enhanced smoke detection withClass A1 heat responseMulti criteria level 4 (least sensitive) - thermally enhancedsmoke detection with Class A1 heat response2. Meets the requirements of EN 54-5 (Class A1R) at the following settings:Class A1R heat only response3. Meets the requirements of EN 54-7 at the following settings:928f/01170 18 Jan 2014

Certificated ProductsOptical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowPART 1: SECTION 4.1COMMERCIAL DETECTORSLPCB Ref.No.Bases20-AB100-ADV20-VB100-ADVMounting baseMounting base (with link resistor)Certificate No: 928k-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-25: 2008Smoke DetectorsCertificated ProductsLPCB Ref.No.20-SG100-ADV Wireless optical smoke detector (WAB100 base) 928k/01Notes:1. Meets the requirements of EN 54-7 in the normal sensitivity setting2. The device must be used with the following batteries only:Bases:WAB100 Wireless Adaptor BaseCR123A (3 Vdc) - main batteryCR2032A (3 Vdc) - secondary batteryCertificate No: 928m-(cl-1) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-25: 2008 and CEA 4021: 2003Multi-Criteria DetectorsCertificated ProductsLPCB Ref.No.20-SG200-ADV Wireless multi-criteria detector (WAB100 base) 928m/01Notes:1. Meets the requirements of EN 54-5 for Class A12. Meets the requirements of EN 54-7 in the normal sensitivity setting3. The device must be used with the following batteries only:Bases:WAB100 Wireless Adaptor BaseCR123A (3 Vdc) - main batteryCR2032A (3 Vdc) - secondary batteryAdvantronic Systems S.L.C/Yunque 9 Nave B1, Tres Cantos, Madrid 28760, SpainTel: +34 91 806 2343 • Fax: +34 91 803 1171E-mail: jpedrouzo@advantronic.es • Website: www.advantronic.esCertificate No: 928a-(cl-3) to 54-5: 2000 + A1: 2002 and EN 54 -17: 2005Certificate No: 928d-(cl-3) to EN 54-5: 2000 + A1: 2002Certificate No: 928j-(cl-2) to EN 54-5: 2000 + A1: 2002 and EN 54-25: 2008Point Heat DetectorsCertificated ProductsLPCB Ref.No.AT120A Analogue addressable Class P heat detector with short circuit isolator (BA100 base) 928a/01Note:1. Meets the requirements of EN 54-5 for Class A1R and Class B.AT120AS Analogue addressable Class P, temperature detector (BA100 base) 928d/01Note:1. Meets the requirements of EN 54-5 for Class A1R and Class B.AT120CM Conventional Class P, heat detector (BA100 and BA101 bases) 928d/02Note:1. Meets the requirements of EN 54-5 for Class A1R and Class B.ATW120A Wireless heat detector (WAB100 base) 928j/0118 Jan 2014 171

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsNotes:1. Meets the requirements of EN 54-5 for Class A1R2. The device must be used with the following batteries only: CR123A (3 Vdc) - main battery CR2032A (3 Vdc) - secondary batteryLPCB Ref.No.BasesBA100BA101WAB100Mounting baseDeep adaptor baseWireless Adaptor BaseCertificate No: 928b-(cl-3) to 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54 -17: 2005Certificate No: 928e-(cl-3) to EN 54-7: 2000 + A1: 2002 + A2: 2006Point Smoke DetectorsCertificated ProductsLPCB Ref.No.928b/01AT110AAnalogue addressable photoelectric smoke detector with short circuit isolator (BA100base)Note:1. Meets the requirements of EN 54-7 at the following sensitivity settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowAT110AS Analogue addressable optical smoke detector (BA100 base) 928e/01Note:1. Meets the requirements of EN 54-7 at the following sensitivity settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowAT110CM Conventional photo smoke detector (BA100 and BA101 bases) 928e/02BasesBA100BA101Mounting baseDeep adaptor baseCertificate No: 928c-(cl-3) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54 -17: 2005 & CEA4021: 2003Certificate No: 928f-(cl-3) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003Multi-sensor DetectorsCertificated ProductsAT130AAnalogue addressable Class P heat and photoelectric smoke multi-sensor detector withshort circuit isolator (BA100 base)Notes:1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the followingsettings:Multi criteria level 1 (most sensitive) - thermally enhancedsmoke detection with Class A1 heat responseMulti criteria level 2 - thermally enhanced smoke detection withClass A1 heat responseMulti criteria level 3 - thermally enhanced smoke detection withClass A1 heat responseMulti criteria level 4 (least sensitive) - thermally enhancedsmoke detection with Class A1 heat response2. Meets the requirements of EN 54-5 (Class A1R) at the following settings:Class A1R heat only response3. Meets the requirements of EN 54-7 at the following settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowLPCB Ref.No.928c/01AT130AS Analogue addressable photo thermal multisensor (BA100 base) 928f/01Notes:172 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated Products1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the followingsettings:Multi criteria level 1 (most sensitive) - thermally enhancedsmoke detection with Class A1 heat responseMulti criteria level 2 - thermally enhanced smoke detection withClass A1 heat responseMulti criteria level 3 - thermally enhanced smoke detection withClass A1 heat responseMulti criteria level 4 (least sensitive) - thermally enhancedsmoke detection with Class A1 heat response2. Meets the requirements of EN 54-5 (Class A1R) at the following settings:Class A1R heat only response3. Meets the requirements of EN 54-7 at the following settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowLPCB Ref.No.BasesBA100Mounting baseCertificate No: 928k-(cl-2) to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-25: 2008Smoke DetectorsCertificated ProductsLPCB Ref.No.ATW110A Wireless optical smoke detector (WAB100 base) 928k/01Notes:1. Meets the requirements of EN 54-7 in the normal sensitivity setting2. The device must be used with the following batteries only:Bases:WAB100 Wireless Adaptor BaseCR123A (3 Vdc) - main batteryCR2032A (3 Vdc) - secondary batteryCertificate No: 928m-(cl-2) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-25: 2008 and CEA 4021: 2003Multi-Criteria DetectorsCertificated ProductsLPCB Ref.No.ATW130A Wireless multi-criteria detector (WAB100 base) 928m/01Notes:1. Meets the requirements of EN 54-5 for Class A12. Meets the requirements of EN 54-7 in the normal sensitivity setting3. The device must be used with the following batteries only:Bases:WAB100 Wireless Adaptor BaseCR123A (3 Vdc) - main batteryCR2032A (3 Vdc) - secondary batteryAGNI Devices PVT LtdC-55 DSIDC Ind Complex, Tilak Vihar, Tilak Nagar, New Delhi 110018, IndiaTel: +91 11 28335624E-mail: info@agnidevices.comCertificate No: 550a to EN 54-7: 2000 + A1: 2002 + A2: 200618 Jan 2014 173

PART 1: SECTION 4.1COMMERCIAL DETECTORSSmoke DetectorsCertificated ProductsLPCB Ref.No.AD338-2L Conventional photoelectric smoke detector (AD300 base) 550a/05AD300 Standard BaseCertificate No: 550b to EN54-5: 2000 + A1: 2002, EN54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003Multi-Sensor/Multi-Criteria DetectorsCertificated ProductsLPCB Ref.No.AD338-2HL Conventional photo-thermal class A1R detector (AD300 base) 550b/06Note: Meets the requirements of EN54-5: 2000 class A1R at pre-set sensitivityBase:AD300 standard baseCertificate No: 550c to EN54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsLPCB Ref.No.AD318-2L Conventional A1R rate of rise heat detector (AD300 base) 550c/08Base:AD300 standard baseAguilera Electronica S.LC / Julian Camarillo 26, Madrid 28037, SpainTel: +34 917545511 • Fax: +34 917545098E-mail: aguilera@aguilera.esCertificate No: 512d-(cl-2) to EN 54-5: 2000 + A1: 2002Point Heat DetectorsCertificated ProductsAE/C5-TVConventional 2 wire 24VDC class A2R fixed temperature and rate-of-rise heat detectorwith LED output (P/N854001 base)LPCB Ref.No.512d/04Bases:P/N854001 4-Wire detector baseCertificate No: 512a-(cl-2) to EN 54-7: 2000 + A1: 2002 + A2: 2006Point Smoke DetectorsCertificated ProductsAE/C5-OPConventional 2 wire photoelectric smoke detector with remote LED output (P/N854001base)LPCB Ref.No.512a/02Bases:P/N854001 4-Wire detector baseCertificate No: 512b-(cl-1) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A1: 2002 & CEA 4021: 2003Multi-criteria DetectorsCertificated ProductsAE/C5-OPTConventional 2 wire photoelectric smoke and heat detector with remote LED output(P/N854001 base)LPCB Ref.No.512b/02174 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSBases:P/N854001 4 Wire detector baseAlarm Supply Pte Ltd63 Jalan Pemimpin, 03-07 Pemimpin Industrial Building, Singapore 577219, SingaporeTel: +65 625 83445 • Fax: +65 625 86428Certificate No: 512a-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated ProductsLPCB Ref.No.EA318-2 Conventional 2 wire photoelectric smoke detector (P/N852001 base) 512a/01EA318-2L Conventional 2 wire photoelectric smoke detector with remote LED output (E300-Base) 512a/02Bases:E300-Base 4-wire detector baseP/N852001 2-wire detector baseCertificate No: 512d-(cl-1) to EN 54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsEA323-2EA323-2L/A2RConventional 2 wire 24VDC class A2R fixed temperature and rate-of-rise heat detector(P/N852001 base)Conventional 2 wire 24VDC class A2R fixed temperature and rate-of-rise heat detectorwith LED output (E300-Base)LPCB Ref.No.512d/02512d/04Bases:E300-Base 4-wire detector baseP/N852001 2-wire detector baseAMPAC Technologies PTY Ltd7 Ledgar Road, Balcatta 6021, AustraliaTel: +618 (9242) 3333 • Fax: +618 (9242) 3334E-mail: info@ampac.net • Website: www.ampac.netCertificate No: 010ar to EN 54-5 : 2000 + A1: 2002Certificate No: 010p-(cl-2) to EN54-5: 2000 + A1: 2002Heat DetectorsCertificated Products55000-465AMP55000-475AMP55000-122AMP55000-127AMP55000-132AMP55000-137AMPAnalogue addressable Class A2S heat detector(45681-505AMP mounting bases)Analogue addressable Classheat detector(45681-505AMP mounting bases)Series 65 Conventional Class A1R heat detector - Standard (45681-200AMP mountingbase) 1Meets the requirements of EN54: Part 5 - Class A1RSeries 65 Conventional Class BR heat detector - Standard (45681-200AMP mountingbase) 1Meets the requirements of EN54: Part 5 - Class BRSeries 65 Conventional Class CR heat detector - Standard (45681-200AMP mountingbase) 1Meets the requirements of EN54: Part 5 - Class CRSeries 65 Conventional Class CS heat detector - Standard (45681-200AMP mountingbase) 1Meets the requirements of EN54: Part 5 - Class CSLPCB Ref.No.010ar/01010ar/02010p/06010p/09010p/12010p/1518 Jan 2014 175

PART 1: SECTION 4.1COMMERCIAL DETECTORSBases:45681-505AMP Negative switching isolating base45681-200AMP Series 60/65 mounting base45681-201AMP Series 60/65 diode mounting base45681-245AMP Series 65 relay mounting base45681-246AMP Series 65 auxiliary relay mounting base45681-247AMP Series 65 EOL 12 Volt mounting base45681-248AMP Series 65 EOL 24 Volt mounting baseNotes:1 Also certificated for use with 45681-245AMP, 45681-246AMP, 45681-247AMP, 45681-248AMP and 45681-201AMP mounting bases.Certificate No: 010as to EN 54-7: 2000 + A1: 2002 + A2: 2006Certificate No: 010q-(cl-2) to EN54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated Products55000-665AMP55000-217AMP55000-220AMP55000-317AMPLPCB Ref.No.Analogue addressable optical smoke detector010as/01(45681-505AMP mounting bases)Series 65 Conventional ionisation smoke detector - Standard (45681-200AMP mounting 010q/06base) 1Series 65 Conventional integrating ionisation smoke detector - Standard (45681-200AMP 010q/09mounting base) 1Series 65 Conventional optical smoke detector - Standard (45681-200AMP mounting 010q/12base) 1Bases:45681-505AMP Negative switching isolating base45681-200AMP Series 60/65 mounting base45681-201AMP Series 60/65 diode mounting base45681-245AMP Series 65 relay mounting base45681-246AMP Series 65 auxiliary relay mounting base45681-247AMP Series 65 EOL 12 Volt mounting base45681-248AMP Series 65 EOL 24 Volt mounting baseNotes:1 Also certificated for use with 45681-245AMP, 45681-246AMP, 45681-247AMP, 45681-248AMP and 45681-201AMP mounting bases.Certificate No: 010at to EN 54-17: 2005Negative Switching Isolating BaseCertificated ProductsLPCB Ref.No.45681-505AMP Negative switching isolating base 010at/01Certificate No: 010m-(cl-1) to EN54-7: 2001 + A1: 2002 + A2: 2006 & CEA 4021: 2003Certificate No: 010aq-(cl-1) to EN 54-5: 2000 + A1: 2002 + LPS 1274: 2005 + LPS 1265: 2004Multi-Sensor/Multi-Criteria DetectorsCertificated Products58000-305AMPAnalogue addressable CO/heat multisensor detector(45681-210AMP, standard intelligent mounting base)LPCB Ref.No.010aq/01Notes:1. Approved with the following mode configurations:-Mode 130 ppm with high thermal enhancement (most sensitive)Mode 233 ppm with CO onlyMode 340 ppm with low thermal enhancement (nominal sensitivity)Mode 445 ppm with high thermal enhancement (least sensitive)Mode 5heat onlyA1R2. Mode 1 , 3, and 4 are approved to LPS1274:2005 and EN 54-5:2000 + A1:2002176 18 Jan 2014

Certificated Products3. Mode 2 is approved to LPS 1265:20044. Mode 5 is approved to EN 54-5:2000 + A1:2002Conditions of approval include;PART 1: SECTION 4.1COMMERCIAL DETECTORSLPCB Ref.No.55000-885AMPa) The 58000-305AMP should only be installed in accordance with themanufacturers recommendations.b) The 58000-305AMP should not be set only as a carbon monoxide fire detectorwhere there is a specific risk of rapid burning/flaming fires.c) Refer to technical publication MAN3038-1 for limitations on the use of carbonmonoxide fire detection.Analogue addressable multisensor detector (45681-209AMP and 45681-210AMP 010m/01mounting base) 1Bases:45681-209AMP XP95/Discovery standard deep mounting base45681-210AMP XP95 mounting base45681-210AMP Standard intelligent mounting baseNote:1Approved with Apollo XP95 and S90 digital communication protocols that have been configured for the XP95 multisensor detector inaccordance with manufacturer’s instructions.Apollo Fire Detectors Limited36 Brookside Road, Havant, Hampshire PO9 1JR, United KingdomTel: +44 (0)2392 492412 • Fax: +44 (0)2392 492754E-mail: enquiries@apollo-fire.co.ukSales Enquiries GermanyApollo Deutschland GmbHTel: +49 5241 330 60 • Fax: +49 5241 330 629E-mail: info@apollo-feuer.deSales Enquiries SpainApollo EspanaTel: +34 627 988 061 • Fax: +34 949 335 289E-mail: apollo.espana@apollo-fire.comSales Enquiries ChinaApollo Fire Detectors Limited, Shanghai representative officeTel: +86 21 5237 0922 • Fax: +86 21 5237 0920E-mail: tony.ye@apollo-fire.comCertificate No: 010r to EN 54: Part 5: 2000Certificate No: 010ab to EN 54-5: 2000 + A1: 2002Certificate No: 010p to EN 54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsXPA-HT-11170-APOXpander addressable radio linked Class A1R heat detector (XPA-WB-10022-APOmounting base)Notes:1) Meets the requirements of EN 54-5 for Class A1R.2) The complete radio base/detector combination is available as Apollo Part No.: XPA-CB-11170-APO.3) The device must be used with the following batteries only: • MN1500 LR6 - 1.5 volt alkaline AA cells.4) The radio link functionality of this device is not included within the scope of approval.LPCB Ref.No.010ab/0118 Jan 2014 177

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLPCB Ref.No.010ab/02XPA-HT-11171-APO Xpander addressable radio linked Class CS heat detector (XPA-WB-10022-APOmounting base)Notes:1) Meets the requirements of EN 54-5 for Class CS.2) The complete radio base/detector combination is available as Apollo Part No.: XPA-CB-11171-APO.3) The device must be used with the following batteries only: • MN1500 LR6 - 1.5 volt alkaline AA cells.4) The radio link functionality of this device is not included within the scope of approval.59000-400 XPlorer Analogue addressable Class A2S heat detector (45681-500 and 45681-501 mounting 010p/01bases)Certificated with Apollo Series 90 and XP95 digital communication protocols59000-410 XPlorer Analogue addressable Class CS heat detector (45681-500 and 45681-501 mounting 010p/02bases)Certificated with Apollo Series 90 and XP95 digital communication protocols58000-400 Discovery Analogue addressable heat detector (45681-209 and 45681-210 mounting base) 2 010p/03Note: Meets the requirements of EN 54: Part 5 for the following settingsClass A1R in mode 1 and in conventional mode.Class A2 in mode 2 and in conventional mode.Class A2S in mode 3 and in conventional mode.Class CR in mode 4 and in conventional mode.Class CS in mode 5 and in conventional mode.Certificated with Apollo, Discovery, XP95 and S90 digital communication protocols whenthe Discovery heat detector has been configured in accordance with manufacturer'sinstructions.55000-120 Series 65 Conventional Class A1R heat detector - Flashing LED/Reed switch (45681-200 mountingbase)010p/04Note: Meets the requirements of EN 54: Part 5 - Class A1RAlso Certificated for use with 45681-245, 45681-246, 45681-247, 45681-248 and 45681-201 mounting bases55000-121 Series 65 Conventional Class A1R heat detector - Flashing LED (45681-200 mounting base) 010p/05Note: Meets the requirements of EN 54: Part 5 - Class A1RAlso Certificated for use with 45681-245, 45681-246, 45681-247, 45681-248 and 45681-201 mounting bases55000-122 Series 65 Conventional Class A1R heat detector - Standard (45681-200 mounting base) 010p/06Note: Meets the requirements of EN 54: Part 5 - Class A1RAlso Certificated for use with 45681-245, 45681-246, 45681-247, 45681-248 and 45681-201 mounting bases55000-125 Series 65 Conventional Class BR heat detector - Flashing LED/Reed switch (45681-200 mountingbase)010p/07Note: Meets the requirements of EN 54: Part 5 - Class BRAlso Certificated for use with 45681-245, 45681-246, 45681-247, 45681-248 and 45681-201 mounting bases55000-126 Series 65 Conventional Class BR heat detector - Flashing LED (45681-200 mounting base) 010p/08Note: Meets the requirements of EN 54: Part 5 - Class BRAlso Certificated for use with 45681-245, 45681-246, 45681-247, 45681-248 and 45681-201 mounting bases55000-127 Series 65 Conventional Class BR heat detector - Standard (45681-200 mounting base) 010p/09Note: Meets the requirements of EN 54: Part 5 - Class BRAlso Certificated for use with 45681-245, 45681-246, 45681-247, 45681-248 and 45681-201 mounting bases55000-130 Series 65 Conventional Class CR heat detector- Flashing LED/Reed switch (45681-200 mountingbase)010p/10Note: Meets the requirements of EN 54: Part 5 - Class CRAlso Certificated for use with 45681-245, 45681-246, 45681-247, 45681-248 and 45681-201 mounting bases55000-131 Series 65 Conventional Class CR heat detector - Flashing LED (45681-200 mounting base) 010p/11Note: Meets the requirements of EN 54: Part 5 - Class CRAlso Certificated for use with 45681-245, 45681-246, 45681-247, 45681-248 and 45681-201 mounting bases55000-132 Series 65 Conventional Class CR heat detector - Standard (45681-200 mounting base) 010p/12Note: Meets the requirements of EN 54: Part 5 - Class CRAlso Certificated for use with 45681-245, 45681-246, 45681-247, 45681-248 and 45681-201 mounting bases55000-135 Series 65 Conventional Class CS heat detector - Flashing LED/Reed switch (45681-200 mountingbase)010p/13Note: Meets the requirements of EN 54: Part 5 - Class CSAlso Certificated for use with 45681-245, 45681-246, 45681-247, 45681-248 and 45681-201 mounting bases55000-136 Series 65 Conventional Class CS heat detector - Flashing LED (45681-200 mounting base) 010p/14Note: Meets the requirements of EN 54: Part 5 - Class CSAlso Certificated for use with 45681-245, 45681-246, 45681-247, 45681-248 and 45681-178 18 Jan 2014

Certificated ProductsPART 1: SECTION 4.1COMMERCIAL DETECTORSLPCB Ref.No.201 mounting bases55000-137 Series 65 Conventional Class CS heat detector - Standard (45681-200 mounting base) 010p/15Note: Meets the requirements of EN 54: Part 5 - Class CSAlso Certificated for use with 45681-245, 45681-246, 45681-247, 45681-248 and 45681-201 mounting bases55000-400 XP95 Analogue addressable Class A2S heat detector 45681-209 and 45681-210 mountingbase)Certificated with Apollo Discovery, XP95, and S90 digital communications protocolsconfigured for the Discovery heat detector in accordance with manufacturers instructions.55000-401 XP95 Analogue addressable Class CS heat detector 45681-209 and 45681-210 mountingbase)Certificated with Apollo Discovery, XP95, and S90 digital communications protocolsconfigured for the Discovery heat detector in accordance with manufacturers instructions.55000-420 XP95 Analogue addressable Class A2S heat detector 45681-209 and 45681-210 mountingbase)Certificated with Apollo Discovery, XP95, and S90 digital communications protocolconfigured for the Discovery heat detector in accordance with manufacturers instructions.55000-440 XP95 IS Analogue addressable intrinsically safe Class A2S heat detector (45681-215 mountingbase)Orbis Class A1RCertified with Apollo Series 90 and XP95 digital communications protocolHeat detectors with Apollo Approval Reference* 00001 (Approved for use with basestyles OB, OL, OD, DX, OR, EB and ORB-BA-10008-APO adaptor base)010p/20010p/21010p/22010p/23010r/01Orbis Class A2SOrbis Class BRORB-HT-11001-APO Orbis class A1R heat detector with SensAlert and FasTestORB-HT-11013-APO Orbis class A1R heat detector with Flashing LED, SensAlert andFasTestOAX-HT-11019-APO Orbis class A1R heat detector with SensAlertOPX-HT-11025-APO Orbis class A1R heat detector with SensAlertOEX-HT-11037-APO Orbis class A1R heat detector with Flashing LED and SensAlertOIX-HT-11043-APO Orbis class A1R heat detector with Flashing LED and SensAlertOMX-HT-11049-APO Orbis class A1R heat detector with SensAlertOSX-HT-11061-APO Orbis class A1R heat detector with Flashing LED and SensAlertOMX-HT-11071-APO Orbis class A1R heat detector with Flashing LED and SensAlertOAX-HT-11077-APO Orbis class A1R heat detector with Flashing LED and SensAlertOEX-HT-11089-APO Orbis class A1R heat detector with SensAlertOSX-HT-11095-APO Orbis class A1R heat detector with SensAlertOPX-HT-11125-APO Orbis class A1R heat detector with Flashing LED and SensAlertOLX-HT-11137-APO Orbis class A1R heat detector with SensAlert and FasTestHeat detectors with Apollo Approval Reference* 00002 (Approved for use with basestyles OB, OL, OD, DX, OR, EB and ORB-BA-10008-APO adaptor base)ORB-HT-11002-APO Orbis class A2S heat detector with SensAlert and FasTestORB-HT-11014-APO Orbis class A2S heat detector with Flashing LED, SensAlert andFasTestOAX-HT-11020-APO Orbis class A2S heat detector with SensAlertOPX-HT-11026-APO Orbis class A2S heat detector with SensAlertOEX-HT-11038-APO Orbis class A2S heat detector with Flashing LED and SensAlertOIX-HT-11044-APO Orbis class A2S heat detector with Flashing LED and SensAlertOMX-HT-11050-APO Orbis class A2S heat detector with SensAlertOSX-HT-11062-APO Orbis class A2S heat detector with Flashing LED and SensAlertOMX-HT-11072-APO Orbis class A2S heat detector with Flashing LED and SensAlertOAX-HT-11078-APO Orbis class A2S heat detector with Flashing LED and SensAlertOEX-HT-11090-APO Orbis class A2S heat detector with SensAlertOSX-HT-11096-APO Orbis class A2S heat detector with SensAlertOPX-HT-11126-APO Orbis class A2S heat detector with Flashing LED and SensAlertOLX-HT-11138-APO Orbis class A2S heat detector with SensAlert and FasTestHeat detectors with Apollo Approval Reference* 00003 (Approved for use with basestyles OB, OL, OD, DX, OR, EB and ORB-BA-10008-APO adaptor base)ORB-HT-11003-APO Orbis class BR heat detector with SensAlert and FasTestORB-HT-11015-APO Orbis class BR heat detector with Flashing LED, SensAlert andFasTestOAX-HT-11021-APO Orbis class BR heat detector with SensAlertOPX-HT-11027-APO Orbis class BR heat detector with SensAlertOEX-HT-11039-APO Orbis class BR heat detector with Flashing LED and SensAlertOIX-HT-11045-APO Orbis class BR heat detector with Flashing LED and SensAlertOMX-HT-11051-APO Orbis class BR heat detector with SensAlertOSX-HT-11063-APO Orbis class BR heat detector with Flashing LED and SensAlertOMX-HT-11073-APO Orbis class BR heat detector with Flashing LED and SensAlertOAX-HT-11079-APO Orbis class BR heat detector with Flashing LED and SensAlertOEX-HT-11091-APO Orbis class BR heat detector with SensAlertOSX-HT-11097-APO Orbis class BR heat detector with SensAlert010r/02010r/0318 Jan 2014 179

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsOrbis Class BSOrbis Class CROrbis Class CSOrbis Class A1SOrbis IS Class A1ROrbis IS Class A2SOPX-HT-11127-APO Orbis class BR heat detector with Flashing LED and SensAlertOLX-HT-11139-APO Orbis class BR heat detector with SensAlert and FasTestHeat detectors with Apollo Approval Reference* 00004 (Approved for use with basestyles OB, OL, OD, DX, OR, EB and ORB-BA-10008-APO adaptor baseORB-HT-11004-APO Orbis class BS heat detector with SensAlert and FasTestORB-HT-11016-APO Orbis class BS heat detector with Flashing LED, SensAlert andFasTestOAX-HT-11022-APO Orbis class BS heat detector with SensAlertOPX-HT-11028-APO Orbis class BS heat detector with SensAlertOEX-HT-11040-APO Orbis class BS heat detector with Flashing LED and SensAlertOIX-HT-11046-APO Orbis class BS heat detector with Flashing LED and SensAlertOMX-HT-11052-APO Orbis class BS heat detector with SensAlertOSX-HT-11064-APO Orbis class BS heat detector with Flashing LED and SensAlertOMX-HT-11074-APO Orbis class BS heat detector with Flashing LED and SensAlertOAX-HT-11080-APO Orbis class BS heat detector with Flashing LED and SensAlertOEX-HT-11092-APO Orbis class BS heat detector with SensAlertOSX-HT-11098-APO Orbis class BS heat detector with SensAlertOPX-HT-11128-APO Orbis class BS heat detector with Flashing LED and SensAlertOLX-HT-11140-APO Orbis class BS heat detector with SensAlert and FasTestHeat detectors with Apollo Approval Reference* 00005 (Approved for use with basestyles OB, OL, OD, DX, OR, EB and ORB-BA-10008-APO adaptor baseORB-HT-11005-APO Orbis class CR heat detector with SensAlert and FasTestORB-HT-11017-APO Orbis class CR heat detector with Flashing LED, SensAlert andFasTestOAX-HT-11023-APO Orbis class CR heat detector with SensAlertOPX-HT-11029-APO Orbis class CR heat detector with SensAlertOEX-HT-11041-APO Orbis class CR heat detector with Flashing LED and SensAlertOIX-HT-11047-APO Orbis class CR heat detector with Flashing LED and SensAlertOMX-HT-11053-APO Orbis class CR heat detector with SensAlertOSX-HT-11065-APO Orbis class CR heat detector with Flashing LED and SensAlertOMX-HT-11075-APO Orbis class CR heat detector with Flashing LED and SensAlertOAX-HT-11081-APO Orbis class CR heat detector with Flashing LED and SensAlertOEX-HT-11093-APO Orbis class CR heat detector with SensAlertOSX-HT-11099-APO Orbis class CR heat detector with SensAlertOPX-HT-11129-APO Orbis class CR heat detector with Flashing LED and SensAlertOLX-HT-11141-APO Orbis class CR heat detector with SensAlert and FasTestHeat detectors with Apollo Approval Reference* 00006 (Approved for use with basestyles OB, OL, OD, DX, OR, EB and ORB-BA-10008-APO adaptor baseORB-HT-11006-APO Orbis class CS heat detector with SensAlert and FasTestORB-HT-11018-APO Orbis class CS heat detector with Flashing LED, SensAlert andFasTestOAX-HT-11024-APO Orbis class CS heat detector with SensAlertOPX-HT-11030-APO Orbis class CS heat detector with SensAlertOEX-HT-11042-APO Orbis class CS heat detector with Flashing LED and SensAlertOIX-HT-11048-APO Orbis class CS heat detector with Flashing LED and SensAlertOMX-HT-11054-APO Orbis class CS heat detector with SensAlertOSX-HT-11066-APO Orbis class CS heat detector with Flashing LED and SensAlertOMX-HT-11076-APO Orbis class CS heat detector with Flashing LED and SensAlertOAX-HT-11082-APO Orbis class CS heat detector with Flashing LED and SensAlertOEX-HT-11094-APO Orbis class CS heat detector with SensAlertOSX-HT-11100-APO Orbis class CS heat detector with SensAlertOPX-HT-11130-APO Orbis class CS heat detector with Flashing LED and SensAlertOLX-HT-11142-APO Orbis class CS heat detector with SensAlert and FasTestHeat detectors with Apollo Approval Reference* 00009 (Approved for use with basestyles OB, OL, OD, DX, OR, EB and ORB-BA-10008-APO adaptor baseORB-HT-11166-APO Orbis class A1S heat detector with SensAlert and FasTestORB-HT-11167-APO Orbis class A1S heat detector with Flashing LED, SensAlert andFasTestIntrinsically safe heat detectors with Apollo Approval Reference* 50001 (Approved foruse with base styles OB (+ATEX marking) and ORB-BA-50008 adapter baseORB-HT-51145-APO Orbis intrinsically safe class A1R heat detector with SensAlert andFasTestORB-HT-51146-APO Orbis intrinsically safe class A1R heat detector with Flashing LED,SensAlert and FasTestIntrinsically safe heat detectors with Apollo Approval Reference* 50002 (Approved foruse with base styles OB (+ATEX marking) and ORB-BA-50008 adapter baseLPCB Ref.No.010r/04010r/05010r/06010r/07010r/08010r/09180 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsOrbis IS Class BROrbis IS Class BSOrbis IS Class CROrbis IS Class CSOrbis IS Class A1SORB-HT-51147-APO Orbis intrinsically safe class A2S heat detector with SensAlert andFasTestORB-HT-51148-APO Orbis intrinsically safe class A2S heat detector with Flashing LED,SensAlert and FasTestIntrinsically safe heat detectors with Apollo Approval Reference* 50003 (Approved foruse with base styles OB (+ATEX marking) and ORB-BA-50008 adapter baseORB-HT-51149-APO Orbis intrinsically safe class BR heat detector with SensAlert andFasTestORB-HT-51150-APO Orbis intrinsically safe class BR heat detector with Flashing LED,SensAlert and FasTestIntrinsically safe heat detectors with Apollo Approval Reference* 50004 (Approved foruse with base styles OB (+ATEX marking) and ORB-BA-50008 adapter baseORB-HT-51151-APO Orbis intrinsically safe class BS heat detector with SensAlert andFasTestORB-HT-51152-APO Orbis intrinsically safe class BS heat detector with Flashing LED,SensAlert and FasTestIntrinsically safe heat detectors with Apollo Approval Reference* 50005 (Approved foruse with base styles OB (+ATEX marking) and ORB-BA-50008 adapter baseORB-HT-51153-APO Orbis intrinsically safe class CR heat detector with SensAlert andFasTestORB-HT-51154-APO Orbis intrinsically safe class CR heat detector with Flashing LED,SensAlert and FasTestIntrinsically safe heat detectors with Apollo Approval Reference* 50006 (Approved foruse with base styles OB (+ATEX marking) and ORB-BA-50008 adapter base)ORB-HT-51155-APO Orbis intrinsically safe class CS heat detector with SensAlert andFasTestORB-HT-51156-APO Orbis intrinsically safe class CS heat detector with Flashing LED,SensAlert and FasTestIntrinsically safe heat detectors with Apollo Approval Reference* 50009 (Approved foruse with base styles OB (+ATEX marking) and ORB-BA-50008 adapter baseORB-HT-51157-APO Orbis intrinsically safe class A1S heat detector with SensAlert andFasTestORB-HT-51158-APO Orbis intrinsically safe class A1S heat detector with Flashing LED,SensAlert and FasTestLPCB Ref.No.010r/10010r/11010r/12010r/13010r/14Bases:45681-200 Series 60 mounting base45681-200 Series 60/65 Mounting Base45681-201 Series 60 diode mounting base45681-201 Series 60/65 Diode Mounting Base45681-207 Series 60 intrinsically safe mounting base45681-209 XP95/Discovery standard deep mounting base45681-210 XP95 mounting base45681-215 XP95 intrinsically safe mounting base45681-245 Series 65 Relay mounting base45681-246 Series 65 Auxiliary relay mounting base45681-247 Series 65 EOL 12 Volt mounting base45681-248 Series 65 EOL 24 Volt mounting base45681-500 XPlorer standard mounting base45681-501 XPlorer remote LED mounting baseTimeSaver bases with Apollo Approval Reference* OBTimeSaver LX bases with Apollo Approval Reference* OLTimeSaver diode bases with Apollo Approval Reference* ODTimeSaver relay bases with Apollo Approval Reference* ORTimeSaver LX diode bases with Apollo Approval Reference* DXTimeSaver IS bases with Apollo Approval Reference* OB (+ATEX marking)TimeSaver deep bases with Apollo Approval Reference*EB: ORB-MB-00019-APO TimeSaver deep baseORB-BA-50008 Orbis intrinsically safe adapter base (to be used in conjunction with the following bases only: 45681-207)ORB-BA-10008-APO Orbis adaptor base (to be used in conjunction with the following bases only: 45681-200 & 45681-201)XPA-WB-10022-APO Radio link mounting base*** The Apollo ‘Approval Reference Number’ identifies a group of detectors that all have the same physical construction, but have featuresenabled or disabled via their software, and/or regional marking variations.**Base manufactured by EMS18 Jan 2014 181

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificate No: 010q to EN 54: Part 7: 2000Certificate No: 010s to EN 54: Part 7: 2000Certificate No: 010ac to EN 54-7: 2000 + A1: 2002Smoke DetectorsCertificated ProductsLPCB Ref.No.010ac/01XPA-OP-12034-APO Xpander addressable radio linked photoelectric smoke detector (XPA-WB-10022-APOmounting base)Notes:1) The complete radio base/detector combination is available as Apollo Part No.: XPA-CB-12034-APO.2) The device must be used with the following batteries only:• MN1500 LR6 - 1.5 volt alkaline AA cells.3) The radio link functionality is not included within the scope of approval.59000-600 Xplorer Analogue addressable optical smoke detector (45681-500 and 45681-501 mounting 010q/01bases)Certificated with Apollo Series 90 and XP95 digital communication protocols58000-500 Discovery Analogue addressable ionisation smoke detector (45681-209 and 45681-210 mounting 010q/02base) 2Note: Meets the requirements of EN 54:Part 7 in modes 1, 2, 3, 4, 5 and in conventionalmode. Certificated with Apollo, Discovery, XP95 and S90 digital communication protocolsthat have been configured for the Discovery ionisation smoke detectors has beenconfigured in accordance with manufacturer's instructions.58000-600 Discovery Analogue addressable photoelectric smoke detector (45681-209 and 45681-210010q/03mounting base) 2Certificated with Apollo Discovery, XP95, and S90 digital communication protocols thathave been configured for the Discovery optical smoke detectors in accordance withmanufacturers instructions.55000-215 Series 65 Conventional ionisation smoke detector - Flashing LED/Reed switch (45681-200mounting base)010q/04Also Certificated for use with 45681-245, 45681-246, 45681-247, 45681-248 and 45681-201 mounting bases55000-216 Series 65 Conventional ionisation smoke detector - Flashing LED (45681-200 mounting base) 010q/05Also Certificated for use with 45681-245, 45681-246, 45681-247, 45681-248 and 45681-201 mounting bases55000-217 Series 65 Conventional ionisation smoke detector - Standard (45681-200 mounting base) 010q/06Also Certificated for use with 45681-245, 45681-246, 45681-247, 45681-248 and 45681-201 mounting bases55000-218 Series 65 Conventional integrating ionisation smoke detector - Flashing LED/Reed switch (45681-200 mounting base)Also Certificated for use with 45681-245, 45681-246, 45681-247, 45681-248 and 45681-201 mounting bases55000-219 Series 65 Conventional integrating ionisation smoke detector - Flashing LED (45681-200 mountingbase)Also Certificated for use with 45681-245, 45681-246, 45681-247, 45681-248 and 45681-201 mounting bases55000-220 Series 65 Conventional integrating ionisation smoke detector - Standard (45681-200 mountingbase)Also Certificated for use with 45681-245, 45681-246, 45681-247, 45681-248 and 45681-201 mounting bases55000-315 Series 65 Conventional optical smoke detector - Flashing LED/Reed switch (45681-200 mountingbase)010q/07010q/08010q/09010q/10Also Certificated for use with 45681-245, 45681-246, 45681-247, 45681-248 and 45681-201 mounting bases55000-316 Series 65 Conventional optical detector - Flashing LED (45681-200 mounting base) 010q/11Also Certificated for use with 45681-245, 45681-246, 45681-247, 45681-248 and 45681-201 mounting bases55000-317 Series 65 Conventional optical smoke detector - Standard (45681-200 mounting base) 010q/12Also Certificated for use with 45681-245, 45681-246, 45681-247, 45681-248 and 45681-201 mounting bases55000-500 XP95 Analogue addressable ionisation smoke detector (45681-209 and 45681-210 mounting 010q/16base) 2Certificated with Apollo Discovery, XP95, and S90 digital communication protocolsthat have been configured for the Discovery ionisation smoke detectors in accordancewith manufacturers instructions .55000-520 XP95 Analogue addressable ionisation smoke detector (45681-209 and 45681-210 mounting 010q/17base) 2Certificated with Apollo Discovery, XP95, and S90 digital communication protocolsthat have been configured for the Discovery ionisation smoke detectors in accordance182 18 Jan 2014

Certificated ProductsPART 1: SECTION 4.1COMMERCIAL DETECTORSLPCB Ref.No.with manufacturers instructions .55000-600 XP95 Analogue addressable optical smoke detector (45681-209 and 45681-210 mounting 010q/18base) 2Certificated with Apollo Discovery, XP95, and S90 digital communication protocols thathave been configured for the Discovery optical smoke detectors in accordance withmanufacturers instructions.55000-620 XP95 Analogue addressable optical smoke detector (45681-209 and 45681-210 mounting 010q/19base) 2Certificated with Apollo Discovery, XP95, and S90 digital communication protocols thathave been configured for the Discovery optical smoke detectors in accordance withmanufacturers instructions.55000-560 XP95 Analogue addressable ionisation smoke detector (45681-209 and 45681-210 mounting 010q/20base) 2Certificated with Apollo Discovery, XP95, and S90 digital communication protocolsthat have been configured for the Discovery ionisation smoke detectors in accordancewith manufacturers instructions .55000-660 XP95 Analogue addressable optical smoke detector (45681-209 and 45681-210 mounting 010q/21base) 2Certificated with Apollo Discovery, XP95, and S90 digital communication protocols thathave been configured for the Discovery optical smoke detectors in accordance withmanufacturers instructions.55000-640 XP95 IS Analogue addressable intrinsically safe optical smoke detector (45681-215 mountingbase)Certified with Apollo Series 90 and XP95 digital communications protocol55000-540 XP95 IS Analogue addressable intrinsically safe ionisation smoke detector (45681-215 mountingbase)OrbisCertified with Apollo Series 90 and XP95 digital communications protocolOptical smoke detectors with Apollo Approval Reference* 00007 (Approved for use withbase styles OB, OL, OD, DX, OR, EB and ORB-BA-10008-APO adaptor base)010q/22010q/23010s/01ORB-OP-12001-APO Orbis optical smoke detector with SensAlert, FasTest and DirtAlertORB-OP-12003-APO Orbis optical smoke detector with Flashing LED, SensAlert,FasTest and DirtAlertOAX-OP-12004-APO Orbis optical smoke detector with SensAlertOPX-OP-12005-APO Orbis optical smoke detector with SensAlert and DirtAlertOEX-OP-12007-APO Orbis optical smoke detector with Flashing LED and SensAlertOIX-OP-12008-APO Orbis optical smoke detector with Flashing LED, SensAlert andDirtAlertOMX-OP-12009-APO Orbis optical smoke detector with SensAlert and DirtAlertOSX-OP-12011-APO Orbis optical smoke detector with Flashing LED and SensAlertOMX-OP-12013-APO Orbis optical smoke detector with Flashing LED, SensAlert andDirtAlertOAX-OP-12014-APO Orbis optical smoke detector with Flashing LED and SensAlertOEX-OP-12016-APO Orbis optical smoke detector with SensAlertOSX-OP-12017-APO Orbis optical smoke detector with SensAlertOPX-OP-12023-APO Orbis optical smoke detector with Flashing LED, SensAlert andDirtAlertOLX-OP-12025-APO Orbis optical smoke detector with SensAlert and FasTestOrbis IS Intrinsically safe optical smoke detectors with Apollo Approval Reference* 50007(Approved for use with base styles OB (+ATEX marking) and ORB-BA-50008-APOadapter base010s/02ORB-OP-52027-APO Orbis intrinsically safe optical smoke detector with SensAlert,FasTest and DirtAlertORB-OP-52028-APO Orbis intrinsically safe optical smoke detector with Flashing LED,SensAlert, FasTest and DirtAlertBases:45681-200 Series 60 mounting base45681-200 Series 60/65 Mounting Base45681-201 Series 60 diode mounting base45681-201 Series 60/65 Diode Mounting Base45681-207 Series 60 intrinsically safe mounting base45681-209 XP95/Discovery standard deep mounting base45681-210 XP95 mounting base45681-215 XP95 intrinsically safe mounting base45681-245 Series 65 Relay mounting base45681-246 Series 65 Auxiliary mounting base45681-247 Series 65 EOL 12 Volt mounting base45681-248 Series 65 EOL 24 Volt mounting base45681-500 XPlorer standard mounting base45681-501 XPlorer remote LED mounting base18 Jan 2014 183

PART 1: SECTION 4.1COMMERCIAL DETECTORSTimeSaver bases with Apollo Approval Reference* OBTimeSaver LX bases with Apollo Approval Reference* OLTimeSaver diode bases with Apollo Approval Reference* ODTimeSaver relay bases with Apollo Approval Reference* ORTimeSaver LX diode bases with Apollo Approval Reference* DXTimeSaver IS bases with Apollo Approval Reference* OB (+ATEX marking)ORB-BA-50008 Orbis intrinsically safe adapter base (to be used in conjunction with the following bases only: 45681-207)ORB-BA-10008-APO Orbis adaptor base (to be used in conjunction with the following bases only: 45681-200 & 45681-201)XPA-WB-10022-APO Radio link mounting base*** The Apollo ‘Approval Reference Number’ identifies a group of detectors that all have the same physical construction, but have featuresenabled or disabled via their software, and/or regional marking variations.**Base manufactured by EMSCertificate No: 010h to EN 54-5:2000 + A1:2002, EN 54-7:2000 + A1:2002 & CEA 4021:2003Certificate No: 010m to CEA 4021: 1999-06(en)Certificate No: 010t to EN 54-7: 2000 & CEA 4021: 1999-06Certificate No: 010ad to EN 54-7: 2000 + A1: 2002 & CEA 4021: 2003Multi-Sensor/Multi-Criteria DetectorsCertificated ProductsLPCB Ref.No.010ad/01XPA-OH-13032-APO Xpander addressable radio linked photoelectric multisensor smoke detector (XPA-WB-10022-APO mounting base)Notes:1) The complete radio base/detector combination is available as Apollo Part No.: XPA-CB-13032-APO.2) The device must be used with the following batteries only: • MN1500 LR6 - 1.5 volt alkaline AA cells.3) The radio link functionality is not included within the scope of approval.58000-700 Discovery Analogue addressable multisensor detector (45681-209 and 45681-210 mounting base) 010h/01Note: Certificated at the following settings.Mode 1 - High sensitivity smoke detector with standard heat enhancement.Mode 2 - Smoke detection only.Mode 3 - Medium sensitivity smoke detector with standard heat enhancement.Mode 4 - Low sensitivity smoke detector with high heat enhancement.Mode 5 - Class A1 heat detector.Also Certificated in conventional alarm modes 1, 2, 3, 4 and 5.Certificated with Discovery XP95 and S90 digital communication protocols that havebeen configured for the Discovery multisensor detector in accordance withmanufacturer's instructions.55000-885 XP95 Analogue addressable multisensor detector (45681-209 and 45681-210 mounting base) 1 010m/01Certificated with Apollo, Discovery, XP95 and S90 digital communication protocols thathave been configured for the Discovery multisensor detectorin accordance with manufacturer's instructions.OrbisMultisensor smoke detectors with Apollo Approval Reference* 00008 for use with basestyles OB, OL, OD, DX, OR, EB and ORB-BA-10008-APO adaptor base)010t/01ORB-OH-13001-APO Orbis multisensor smoke detector with SensAlert, FasTest andDirtAlertORB-OH-13003-APO Orbis multisensor smoke detector with Flashing LED, SensAlert,FasTest and DirtAlertOAX-OH-13004-APO Orbis multisensor smoke detector with SensAlertOPX-OH-13005-APO Orbis multisensor smoke detector with SensAlert and DirtAlertOEX-OH-13007-APO Orbis multisensor smoke detector with Flashing LED andSensAlertOIX - OH-13008-APO Orbis multisensor smoke detector with Flashing LED, SensAlertand DirtAlertOMX-OH-13009-APO Orbis multisensor smoke detector with SensAlert and DirtAlertOSX-OH-13011-APO Orbis multisensor smoke detector with Flashing LED andSensAlertOMX-OH-13013-APO Orbis multisensor smoke detector with Flashing LED, SensAlertand DirtAlertOAX-OH-13014-APO Orbis multisensor smoke detector with Flashing LED andSensAlertOEX-OH-13016-APO Orbis multisensor smoke detector with SensAlertOSX-OH-13017-APO Orbis multisensor smoke detector with SensAlertOPX-OH-13023-APO Orbis multisensor smoke detector with Flashing LED, SensAlertand DirtAlertOLX-OH-13025-APO Orbis multisensor smoke detector with SensAlert and FasTestOrbis IS Intrinsically safe multisensor detectors with Apollo Approval Reference* 50008(Approved for use with base styles OB (+ATEX marking) and ORB-MB-50008-APOadapter base)010t/02184 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLPCB Ref.No.ORB-OH-53027-APO Orbis intrinsically safe multisensor detector with SensAlert,FasTest and DirtAlertORB-OH-53028-APO Orbis intrinsically safe multisensor detector with Flashing LED,SensAlert, FasTest and DirtAlertBases:45681-209 XP95/Discovery standard deep mounting base45681-210 XP95 mounting baseTimeSaver bases with Apollo Approval Reference* OBTimeSaver LX bases with Apollo Approval Reference* OLTimeSaver diode bases with Apollo Approval Reference* ODTimeSaver relay bases with Apollo Approval Reference* ORTimeSaver LX diode bases with Apollo Approval Reference* DXTimeSaver IS bases with Apollo Approval Reference* OB (+ATEX marking)ORB-BA-50008 Orbis intrinsically safe adapter base (to be used in conjunction with the following bases only: 45681-207)ORB-BA-10008-APO Orbis adaptor base (to be used in conjunction with the following bases only: 45681-200 & 45681-201)XPA-WB-10022-APO Radio link mounting base*** The Apollo ‘Approval Reference Number’ identifies a group of detectors that all have the same physical construction, but have featuresenabled or disabled via their software, and/or regional marking variations.**Base manufactured by EMSCertificate No: 010an to EN 54-10: 2002 + A1:2005Flame DetectorsCertificated ProductsLPCB Ref.No.55000-022 XP95 intelligentflame detector (45681-209 and 45681-210) 010an/01Note: Meets EN 54-10: 2002 at Class 1 and Class 355000-023 XP95 intelligent 2 flame detectorand 45681-210) 010an/02Note: Meets EN 54-10: 2002 at Class 1 and Class 355000-024 XP95 intelligent 3 flame detectorand 45681-210) 010an/03Note: Meets EN 54-10: 2002 at Class 1 and Class 355000-025 S65 conventional UV flame detector (45681-200 and 45681-201) 010an/04Note: Meets EN 54-10: 2002 at Class 1 and Class 355000-019 Conventional IR 3 Flame Detector (29600-203) 010an/05Note:Meets EN 54-10: 2002 at Class 1 only55000-060 Conventional IR² Flame Detector (29600-203) 010an/06Note:Meets EN 54-10: 2002 at Class 1 only55000-061 Conventional IR² (Exd) Flameproof Flame Detector (29600-203) 010an/07Note:Meets EN 54-10: 2002 at Class 1 only55000-062 Conventional IR 3 (Exd) Flameproof Flame Detector (29600-203) 010an/08Note:Meets EN 54-10: 2002 at Class 1 only55000-063 Conventional IR 3 Intrinsically Safe Flame Detector (29600-203) 010an/09Note:Meets EN 54-10: 2002 at Class 1 only55000-064 Conventional UV/IR 2 Flame Detector (29600-203) 010an/10Note:Meets EN 54-10: 2002 at Class 1 only55000-065 Conventional UV/IR 2 (Exd) Flameproof Flame Detector (29600-203) 010an/11Note:Meets EN 54-10: 2002 at Class 1 only55000-282 Analogue Addressable IR 3 Intrinsically Safe Flame Detector (29600-203) 010an/12Note:Meets EN 54-10: 2002 at Class 1 onlyBases45681-200 Mounting Base45681-201 Mounting Base with Diode45681-209 Deep Base45681-210 Mounting BaseAncillaries18 Jan 2014 185

PART 1: SECTION 4.1COMMERCIAL DETECTORS29600-203 Mounting BracketCertificate No: 010aq to LPS 1274: 2005, EN 54-5: 2000 + A1: 2002 and LPS 1265: 2004Multi-Sensor/Multi-Criteria DetectorsCertificated Products58000-305 Analogue addressable CO/heat multisensor detector(45681-210, standard intelligent mounting base)Notes:1. Approved with the following mode configurations:-Mode 1 30 ppm with high thermal enhancement (most sensitive)Mode 2 33 ppm with CO onlyMode 3 40 ppm with low thermal enhancement (nominal sensitivity)Mode 4 45 ppm with high thermal enhancement (least sensitive)Mode 5 heat onlyA1RLPCB Ref.No.010aq/012. Mode 1 , 3, and 4 are approved to LPS1274:2005 and EN 54-5:2000 + A1: 20023. Mode 2 is approved to LPS 1265:20044. Mode 5 is approved to EN 54-5:2000 + A1:2002Conditions of approval include;a) The 58000-305 should only be installed in accordance with the manufacturer’srecommendations.b) The 58000-305 should not be set only as a carbon monoxide fire detectorwhere there is a specific risk of rapid burning/flaming fires.c) Refer to technical publication PP2382 for limitations on the use of carbonmonoxide fire detection.Base:45681-210 Standard intelligent mounting baseCertificate No: 010at to EN 54-17: 2005Isolating baseCertificated ProductsLPCB Ref.No.45681-505 Negative switching isolating base 010at/01Certificate No: 010ar to EN 54-5: 2000 + A1: 2002Heat DetectorsCertificated Products55000-465 Analogue addressable Classheat detector(45681-200 , 45681-213 and 45681-505 mounting bases)55000-475 Analogue addressable Classheat detector(45681-200 , 45681-213 and 45681-505 mounting bases)LPCB Ref.No.010ar/01010ar/02Bases:45681-200 Mounting base45681-213 Common mounting base45681-505 Negative switching isolating baseCertificate No: 010as to EN 54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated Products55000-665 Analogue addressable optical smoke(45681-200 , 45681-213 and 45681-505 mounting bases)LPCB Ref.No.010as/01186 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSBases:45681-200 Mounting base45681-213 Common mounting base45681-505 Negative switching isolating baseArgus Security S.r.l.Via del Canneto 14, Valle delle Noghere, 34015 Muggia, Trieste, ItalyTel: +39 (0) 402821110 • Fax: +39 (0) 402823483E-mail: dcresseri@argussecurity.it • Website: www.argussecurity.itCertificate No: 928a to EN 54-5: 2000 + A1: 2002 and EN 54 -17: 2005Certificate No: 928d to EN 54-5: 2000 + A1: 2002Point Heat DetectorsCertificated ProductsLPCB Ref.No.928a/01V350Analogue addressable Class P heat detector with short circuit isolator (VB100, UB100,VB100S, UB100S, VDBS100, DBS100, VDBS100S and DBS100S bases)Note:1. Meets the requirements of EN 54-5 for Class A1R and Class BA3500 Addressable Class P heat detector with short-circuit isolator (LAB100 base) 928a/02Note:1. Meets the requirements of EN 54-5 for Class A1R, Class B and Class BSLV350S3500Vega-Lite analogue addressable Class P, heat detector (VB100, UB100, VB100S,UB100S, VDBS100, DBS100, VDBS100S and DBS100S bases)Note:1. Meets the requirements of EN 54-5 for Class A1R and Class B.Conventional Class P heat detector (UB100, DBS100, UBR100, DBSR100, UBDR100and DBSRD100)Note:1. Meets the requirements of EN 54-5 for Class A1R and Class B928d/01928d/02BasesVB100UB100VB100SUB100SVDBS100DBS100VDBS100SDBS100SUBR100DBSR100UBDR100DBSRD100LAB100Vega adaptor mounting base (with link resistor)Universal adaptor mounting baseVega adaptor base with shorting clipUniversal adaptor base with shorting clipVega deep adaptor baseDeep adaptor baseVega deep adaptor base with shorting clipDeep adaptor base with shorting clipUniversal adaptor base with resistorDeep adaptor base with resistorUniversal adaptor base with resistor and Schottky diodeDeep adaptor base with resistor and Schottky diodeStandard mounting baseCertificate No: 928b to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-17: 2005Certificate No: 928e to EN 54-7: 2000 + A1: 2002 + A2: 2006Point Smoke DetectorsCertificated ProductsV100Analogue addressable photoelectric smoke detector with short circuitisolator (VB100, UB100, VB100S, UB100S, VDBS100, DBS100,VDBS100S and DBS100S bases)Note:1. Meets the requirements of EN 54-7 at the following sensitivity settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowLPCB Ref.No.928b/01A1000 Addressable photoelectric smoke detector with short-circuit isolator (LAB100 base) 928b/0218 Jan 2014 187

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLV100S1000Notes:1. Meets the requirements of EN 54-7 at the following sensitivity settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowVega-Lite analogue addressable optical smoke detector (VB100,UB100, VB100S, UB100S, VDBS100, DBS100, VDBS100S andDBS100S bases)Note:1. Meets the requirements of EN 54-7 at the following sensitivity settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowConventional photo smoke detector (UB100, DBS100, UBR100, DBSR100, UBDR100and DBSRD100)LPCB Ref.No.928e/01928e/02BasesVB100UB100VB100SUB100SVDBS100DBS100VDBS100SDBS100SUBR100DBSR100UBDR100DBSRD100LAB100Vega adaptor mounting base (with link resistor)Universal adaptor mounting baseVega adaptor base with shorting clipUniversal adaptor base with shorting clipVega deep adaptor baseDeep adaptor baseVega deep adaptor base with shorting clipDeep adaptor base with shorting clipUniversal adaptor base with resistorDeep adaptor base with resistorUniversal adaptor base with resistor and Schottky diodeDeep adaptor base with resistor and Schottky diodeStandard mounting baseCertificate No: 928c to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54 -17: 2005 & CEA 4021: 2003Certificate No: 928f to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003Multisensor DetectorsCertificated ProductsV200Analogue addressable Class P heat and photoelectric smoke multisensor detector with short circuit isolator (VB100, UB100, VB100S,UB100S, VDBS100, DBS100, VDBS100S and DBS100S bases)LPCB Ref.No.928c/01Notes1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings:Multi Criteria Level 1 (most sensitive) - Thermally enhanced smoke detection withClass A1 heat responseMulti Criteria Level 2 - Thermally enhanced smoke detection with Class A1 heatresponseMulti Criteria Level 3 - Thermally enhanced smoke detection with Class A1 heatresponseMulti Criteria Level 4 (least sensitive) - Thermally enhanced smoke detection withClass A1 heat response2. Meets the requirements of EN 54-5 (Class A1R) at the following settings:Class A1R heat only response3. Meets the requirements of EN 54-7 at the following settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowA2000 Addressable multi-criteria detector with short-circuit isolator (LAB100 base) 928c/02Notes:1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings:Multi Criteria Level 1 (most sensitive) - Thermally enhanced smokedetection with Class A1 heat responseMulti Criteria Level 2 - Thermally enhanced smoke detection with ClassA1 heat responseMulti Criteria Level 3 - Thermally enhanced smoke detection with Class188 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLV200A1 heat responseMulti Criteria Level 4 (least sensitive) - Thermally enhanced smokedetection with Class A1 heat response2. Meets the requirements of EN 54-5 (Class A1R) at the following settings:Class A1R heat only response3. Meets the requirements of EN 54-7 at the following sensitivity settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowVega-Lite analogue addressable photo thermal multisensor (VB100,UB100, VB100S, UB100S, VDBS100, DBS100, VDBS100S andDBS100S bases)Notes1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings:Multi criteria level 1 (most sensitive) - thermally enhanced smoke detection withClass A1 heat responseMulti criteria level 2 - thermally enhanced smoke detection with Class A1 heatresponseMulti criteria level 3 - thermally enhanced smoke detection with Class A1 heatresponseMulti criteria level 4 (least sensitive) - thermally enhanced smoke detection withClass A1 heat response2. Meets the requirements of EN 54-5 (Class A1R) at the following settings:Class A1R heat only response3. Meets the requirements of EN 54-7 at the following settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowLPCB Ref.No.928f/01BasesVB100UB100VB100SUB100SVDBS100DBS100VDBS100SDBS100SLAB100Vega adaptor mounting base (with link resistor)Vega universal mounting baseVega adaptor base with shorting clipUniversal adaptor base with shorting clipVega deep adaptor baseDeep adaptor baseVega deep adaptor base with shorting clipDeep adaptor base with shorting clipStandard mounting baseCertificate No: 928j to EN 54-5: 2000 + A1: 2002 and EN 54-25: 2008Heat DetectorsCertificated ProductsLPCB Ref.No.SG350 Wireless heat detector (WAB100 base) 928j/01Notes:1. Meets the requirements of EN 54-5 for Class A1R2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR2032A (3 Vdc) - secondary batteryBasesWAB100Wireless Adaptor BaseCertificate No: 928k to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-25: 2008Smoke DetectorsCertificated ProductsLPCB Ref.No.SG100 Wireless optical smoke detector (WAB100 base) 928k/01Notes:1. Meets the requirements of EN 54-7 in the normal sensitivity setting18 Jan 2014 189

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated Products2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR2032A (3 Vdc) - secondary batteryLPCB Ref.No.BasesWAB100Wireless Adaptor BaseCertificate No: 928m to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-25: 2008 and CEA 4021: 2003Multi-Criteria DetectorsCertificated ProductsLPCB Ref.No.SG200 Wireless multi-criteria detector (WAB100 base) 928m/01Notes:1. Meets the requirements of EN 54-5 for Class A12. Meets the requirements of EN 54-7 in the normal sensitivity settings3. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR2032A (3 Vdc) - secondary batteryBasesWAB100Wireless Adaptor BaseArgus-Spectrum65 Serdobolskaya St, St. Petersburg 197342, Russian FederationTel: +7 812 7037500 • Fax: +7 812 7037501E-mail: mail@argus-spectr.ru • Website: www.argus-spectr.ruCertificate No: 928k-(cl-3) to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-25: 2008Smoke DetectorsCertificated ProductsLPCB Ref.No.SG100 Wireless optical smoke detector (WAB100 base) 928k/01Notes:1. Meets the requirements of EN 54-7 in the normal sensitivity setting2. The device must be used with the following batteries only:Bases:WAB100 - Wireless Adaptor BaseCR123A (3 Vdc) - main batteryCR2032A (3 Vdc) - secondary batteryCertificate No: 928a-(cl-2) to 54-5: 2000 + A1: 2002 and EN 54 -17: 2005Certificate No: 928d-(cl-2) to EN 54-5: 2000 + A1: 2002Certificate No: 603d to EN 54-5: 2000 + A1: 2002Certificate No: 928j-(cl-3) to EN 54-5: 2000 + A1: 2002 and EN 54-25: 2008Point Heat DetectorsCertificated ProductsS3500V350Conventional Class P heat detector (UB100, DBS100, UBR100, DBSR100, UBDR100and DBSRD100)Note:1. Meets the requirements of EN 54-5 for Class A1R and Class BAnalogue addressable Class P heat detector with short circuit isolator (VB100 andUB100 bases)Notes1. Meets the requirements of EN 54-5 for Class A1R and Class B.LPCB Ref.No.603d/01928a/01190 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLV350Vega-Lite analogue addressable Class P, temperature detector (VB100 and UB100bases)Notes1. Meets the requirements of EN 54-5 for Class A1R and Class B.LPCB Ref.No.928d/01SG350 Wireless heat detector (WAB100 base) 928j/01Notes:1. Meets the requirements of EN 54-5 for Class A1R2. The device must be used with the following batteries only: CR123A (3 Vdc) - main battery CR2032A (3 Vdc) - secondary batteryBases:BS100BSD100VB100UB100DBS100UBR100DBSR100UBDR100DBSRD100WAB100Standard baseSchottky Diode baseVega adaptor mounting base (with link resistor)Universal adaptor baseDeep adaptor baseUniversal adaptor base with resistorDeep adaptor base with resistorUniversal adaptor base with resistor and Schottky diodeDeep adaptor base with resistor and Schottky diodeWireless Adaptor BaseCertificate No: 928b-(cl-2) to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54 -17: 2005Certificate No: 928e-(cl-2) to EN 54-7: 2000 + A1: 2002 + A2: 2006Certificate No: 603c to EN 54-7: 2000 + A1: 2002 + A2: 2006Point Smoke DetectorCertificated ProductsS1000V100Conventional photo smoke detector (UB100, DBS100, UBR100, DBSR100, UBDR100and DBSRD100)Analogue addressable photoelectric smoke detector with short circuit isolator (VB100 andUB100 bases)LPCB Ref.No.603c/01928b/01Notes1. Meets the requirements of EN 54-7 at the following sensitivity settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 LowLV100 Vega-Lite analogue addressable optical smoke detector (VB100 and UB100 bases) 928e/01Notes1. Meets the requirements of EN 54-7 at the following sensitivity settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 LowBasesVB100UB100UB100DBS100UBR100DBSR100UBDR100DBSRD100Vega adaptor mounting base (with link resistor)Vega universal mounting baseUniversal adaptor baseDeep adaptor baseUniversal adaptor base with resistorDeep adaptor base with resistorUniversal adaptor base with resistor and Schottky diodeDeep adaptor base with resistor and Schottky diodeCertificate No: 928c-(cl-2) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54 -17: 2005 & CEA4021: 2003Certificate No: 928f-(cl-2) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003Multi-sensor DetectorsCertificated ProductsLPCB Ref.No.V200 Analogue addressable Class P heat and photoelectric smoke multi-sensor detector with 928c/0118 Jan 2014 191

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated Productsshort circuit isolator (VB100 and UB100 bases)Notes1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the followingsettings:Multi criteria level 1 (most sensitive) - thermally enhancedsmoke detection with Class A1 heat responseMulti criteria level 2 - thermally enhanced smoke detection withClass A1 heat responseMulti criteria level 3 - thermally enhanced smoke detection withClass A1 heat responseMulti criteria level 4 (least sensitive) - thermally enhancedsmoke detection with Class A1 heat response2. Meets the requirements of EN 54-5 (Class A1R) at the following settings:Class A1R heat only response3. Meets the requirements of EN 54-7 at the following settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowLPCB Ref.No.LV200 Vega-Lite analogue addressable photo thermal multisensor (VB100 and UB100 bases) 928f/01Notes1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the followingsettings:Multi criteria level 1 (most sensitive) - thermally enhancedsmoke detection with Class A1 heat responseMulti criteria level 2 - thermally enhanced smoke detection withClass A1 heat responseMulti criteria level 3 - thermally enhanced smoke detection withClass A1 heat responseMulti criteria level 4 (least sensitive) - thermally enhancedsmoke detection with Class A1 heat response2. Meets the requirements of EN 54-5 (Class A1R) at the following settings:Class A1R heat only response3. Meets the requirements of EN 54-7 at the following settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowBasesVB100 Vega adaptor mounting base (with link resistor)UB100 Vega universal mounting baseCertificate No: 928m-(cl-3) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-25: 2008 and CEA 4021: 2003Multi-Criteria DetectorsCertificated ProductsLPCB Ref.No.SG200 Wireless multi-criteria detector (WAB100 base) 928m/01Notes:1. Meets the requirements of EN 54-5 for Class A12. Meets the requirements of EN 54-7 in the normal sensitivity setting3. The device must be used with the following batteries only:Bases:WAB100 Wireless Adaptor BaseCR123A (3 Vdc) - main batteryCR2032A (3 Vdc) - secondary battery192 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSATEIS Middle East FZCOLIU 11 Dubai Silicon Oasis, Post Box 293640, Dubai, United Arab EmiratesTel: +971 4 3262730 • Fax: +971 4 3262731E-mail: info@ateis.ae • Website: www.ateis.aeCertificate No: 928a-(cl-7) to EN 54-5: 2000 + A1: 2002 and EN 54-17: 2005Certificate No: 1154d to EN 54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsVELOX LV350 Analogue addressable Class P heat detector lite (40900, 40900-S, 40900-DP, 40900-DPS bases)Note:Meets the requirements of EN 54-5 for Class A1R and Class BX350Conventional Class P heat detector (3900, 3900-DP, 3900-R, 3900-DPR, 3900-RD and3900-DPRD bases)Note:Meets the requirements of EN 54-5 for Class A1R and Class BVELOX V350Analogue addressable Class P heat detector with short circuit isolator (VELOX VB100,UB100, VELOX VB100S, UB100S, VELOX VDBS100, DBS100, VELOX VDBS100S andDBS100S bases)Note:1. Meets the requirements of EN 54-5 for Class A1R and Class BLPCB Ref.No.1154d/011154d/02928a/01BasesVELOX VB100Velox adaptor baseUB100Universal adaptor baseVELOX VB100SVelox adaptor base with shorting clipUB100SUniversal adaptor base with shorting clipVELOX VDBS100Velox deep adaptor baseDBS100Deep adaptor baseVELOX VDBS100S Velox deep adaptor base with shorting clipDBS100SDeep adaptor base with shorting clipUBR100Universal adaptor base with resistorDBSR100Deep adaptor base with resistorUBDR100Universal adaptor base with resistor and Schottky diodeDBSRD100Deep adaptor base with resistor and Schottky diode40900 Velox adaptor base40900-S Velox adaptor base with short clip40900-DPVelox deep adaptor base40900-DPSVelox deep adaptor base with short clip3900 Conventional detector adaptor base3900-DPConventional detector deep adaptor base3900-R Conventional detector adaptor base with resister3900-DPRConventional detector deep adaptor base with resistor3900-RDConventional detector adaptor base with resistor and Schottky diode3900-DPRDConventional detector deep adaptor base with resister and Schottky diodeCertificate No: 928b-(cl-7) to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-17: 2005Certificate No: 928k-(cl-4) to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-25: 2008Certificate No: 1154e to EN 54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated ProductsLPCB Ref.No.1154e/01VELOX LV100Analogue addressable photoelectric smoke detector lite (40900, 40900-S, 40900-DP and40900-DPS bases)Note:Meets the requirements of EN 54-7 at the following sensitivity settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowX100 Conventional photoelectric smoke detector (3900, 3900-DP, 3900-R, 3900-DPR, 3900- 1154e/0218 Jan 2014 193

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLPCB Ref.No.RD and 3900-DPRD bases)VELOX V100Analogue addressable photoelectric smoke detector with short circuit isolator (VELOX 928b/01VB100, UB100, VELOX VB100S, UB100S, VELOX VDBS100, DBS100, VELOXVDBS100S and DBS100S bases)Note:1. Meets the requirements of EN 54-7 at the following sensitivity settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowVELOX WL100 Wireless optical smoke detector (WAB100 base) 928k/01Notes:1. Meets the requirements of EN 54-5 for Class A1R2. The device must be used with the following batteries only: CR123A (3 Vdc) - main battery CR2032A (3 Vdc) - secondary batteryBasesVELOX VB100UB100VELOX VB100SUB100SVELOX VDBS100DBS100VELOX VDBS100SDBS100SWAB100Velox adaptor baseUniversal adaptor baseVelox adaptor base with shorting clipUniversal adaptor base with shorting clipVelox deep adaptor baseDeep adaptor baseVelox deep adaptor base with shorting clipDeep adaptor base with shorting clipWireless Adaptor Base40900 Velox adaptor base40900-S Velox adaptor base with short clip40900-DP Velox deep adaptor base40900-DPS Velox deep adaptor base with short clip3900 Conventional detector adaptor base3900-DP Conventional detector deep adaptor base3900-R Conventional detector adaptor base with resister3900-DPR Conventional detector deep adaptor base with resistor3900-RD Conventional detector adaptor base with resistor and Schottky diode3900-DPRD Conventional detector deep adaptor base with resister and Schottky diodeCertificate No: 928c-(cl-7) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005 and CEA 4021: 2003Certificate No: 928m-(cl-4) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-25: 2008 and CEA 4021: 2003Certificate No: 1154f to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 and CEA 4021: 2003Multi-Criteria DetectorsCertificated ProductsVELOX LV200VELOX V200Analogue addressable Class P heat and photoelectric smoke multi-sensor detector lite(40900, 40900-S, 40900-DP and 40900-DPS bases)Notes:1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings:Multi Criteria Level 1 (most sensitive) - Thermally enhanced smoke detection withClass A1 heat responseMulti Criteria Level 2 - Thermally enhanced smoke detection with Class A1heat responseMulti Criteria Level 3 - Thermally enhanced smoke detection with Class A1heat responseMulti Criteria Level 4 (least sensitive) - Thermally enhanced smoke detectionwith Class A1 heat response2. Meets the requirements of EN 54-5 (Class A1R) at the following settings: Class A1Rheat only response3. Meets the requirements of EN 54-7 at the following settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowAnalogue addressable Class P heat and photoelectric smoke multi-sensor detector withshort circuit isolator (VELOX VB100, UB100, VELOX VB100S, UB100S, VELOXVDBS100, DBS100, VELOX VDBS100S and DBS100S bases)Notes:LPCB Ref.No.1154f/01928c/01194 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLPCB Ref.No.1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings:Multi Criteria Level 1 (most sensitive) - Thermally enhanced smokedetection with Class A1 heat responseMulti Criteria Level 2 - Thermally enhanced smoke detection with ClassA1 heat responseMulti Criteria Level 3 - Thermally enhanced smoke detection with ClassA1 heat responseMulti Criteria Level 4 (least sensitive) - Thermally enhanced smokedetection with Class A1 heat response2. Meets the requirements of EN 54-5 (Class A1R) at the following settings:Class A1R heat only response3. Meets the requirements of EN 54-7 at the following settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowVELOX WL200 Wireless multi-criteria detector (WAB100 base) 928m/01Notes:1. Meets the requirements of EN 54-5 for Class A12. Meets the requirements of EN 54-7 in the normal sensitivity setting3. The device must be used with the following batteries only: CR123A (3 Vdc) - main battery CR2032A (3 Vdc) - secondary batteryBasesVELOX VB100UB100VELOX VB100SUB100SVELOX VDBS100DBS100VELOX VDBS100SDBS100SWAB100Velox adaptor baseUniversal adaptor baseVelox adaptor base with shorting clipUniversal adaptor base with shorting clipVelox deep adaptor baseDeep adaptor baseVelox deep adaptor base with shorting clipDeep adaptor base with shorting clipWireless Adaptor Base40900 Velox adaptor base40900-S Velox adaptor base with short clip40900-DPVelox deep adaptor base40900-DPSVelox deep adaptor base with short clipCertificate No: 928j-(cl-4) to EN 54-5: 2000 + A1: 2002 and EN 54-25: 2008Point Heat DetectorsCertificated ProductsLPCB Ref.No.VELOX WL350 Wireless heat detector (WAB100 base) 928j/01Notes:1. Meets the requirements of EN 54-5 for Class A1R2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR2032A (3 Vdc) - secondary batteryBases:WAB100Wireless Adaptor BaseAutronica Fire & Security ASPostboks 5620 NO-7483, Trondheim, NorwayTel: +47 73582500 • Fax: +47 73582501E-mail: info@autronicafire.no • Website: www.autronicafire.noCertificate No: 1130a to EN54-10: 2002 + A1: 2005 & EN54-17: 2005Certificate No: 1130b to EN54-10: 2002 + A1: 200518 Jan 2014 195

PART 1: SECTION 4.1COMMERCIAL DETECTORSFlame DetectorsCertificated ProductsLPCB Ref.No.BG-201 Anaologue addressable IR flame detector (interactive) 1130a/01Note: Meets EN54-10: 2002 at Class 1, Class 2 & Class 3BG-21 Conventional IR flame detector 1130b/01Note: Meets EN54-10: 2002 at Class 1 & Class 3Bardic by Honeywell (Novar Systems Ltd)140 Waterside Road, Hamilton Industrial Estate, Leicester LE5 1TN, United KingdomTel: +44 (0) 116 246 2212 • Fax: +44 (0) 116 246 2210Website: www.bardic.co.ukCertificate No: 199n to EN 54-5: 2000Heat DetectorsCertificated ProductsZF03 class A2SZF04 class BSZF05 class A1RConventional fixed temperature heat detector(2020B, 2020DB, 2020BSD, 2020DBSD bases)Conventional fixed temperature heat detector(2020B, 2020DB, 2020BSD, 2020DBSD bases)Conventional rate of rise heat detector(2020B, 2020DB, 2020BSD, 2020DBSD bases)LPCB Ref.No.199n/10199n/11199n/12Bases:2020B Standard base2020DB Deep base2020BSD Standard base with schottky diode2020DBSD Deep base with schottky diodeCertificate No: 199m to EN 54-7: 2000Photoelectric DetectorsCertificated ProductsZF01Conventional photoelectric detector(2020B, 2020DB, 2020BSD, 2020DBSD bases)LPCB Ref.No.199m/05Bases:2020B Standard base2020DB Deep base2020BSD Standard base with schottky diode2020DBSD Deep base with schottky diodeCertificate No: 199p to EN 54-5: 2000, EN 54-7: 2000 & CEA 4021 1999Multi-criteria DetectorsCertificated ProductsZF02Conventional photo thermal detector(2020B, 2020DB, 2020BSD, 2020DBSD bases)LPCB Ref.No.199p/04Bases:2020B Standard base2020DB Deep base2020BSD Standard base with schottky diode2020DBSD Deep base with schottky diode196 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSBeijing Leader Huaxin Electronics Co. LtdNo. 17 Rongjing Eastern Road, Economy & Technology Developed Area, Beijing 100176, ChinaTel: +86 10 67876681 • Fax: +86 10 67863972E-mail: hy.chen@beijingleader.com.cn • Website: www.beijingleader.com.cnCertificate No: 987a to EN 54-7: 2000 + A1: 2002 + A2: 2006Certificated ProductsJTY-GM-LD3000EN/AAnalogue addressable photoelectric smoke detector(LD10EN base)LPCB Ref.No.987a/01Bases:LD10EN mounting baseBeijing VSAIL Fire Protection Equipment Co LtdNo. 401, Unit A, Building 32,, No. 99 14th Kechuang Street, BDA, Beijing 100176, ChinaTel: +86 (0) 10-56691196 • Fax: +86 (0) 10-56691100Website: http://www.vsail.com.cnCertificate No: 1174b to EN 54-5:2000 + A1: 2002Heat detectorCertificated ProductsLPCB Ref.No.VC-6633 Conventional heat detector 1174b/01Note: Meets the requirements of EN 54-5 2000 at class A2RBaseVB-6611Bristol Fire LtdThe Colin Saunders Innovation Centre, Mewburn Road, Banbury, Oxfordshire OX16 9PA, United KingdomTel: +44 1295 817623E-mail: sami@bristol-fire.com • Website: www.bristol-fire.comCertificate No: 506b-(cl-2) to EN 54-7 : 2000 + A1: 2002 + A2: 2006, EN 54-5 : 2000 + A1 : 2002 and CEA 4021: 2003Point Smoke DetectorsCertificated ProductsLPCB Ref.No.BF-SH-0115-2 (2 Wire) Optical smoke and class A2 heat detector (AHMB-031 Base) 506b/01BF-SH-0115-3 (3 Wire) Optical smoke and class A2 heat detector (AHMB-031 Base) 506b/02BF-SH-0115-4 (4 Wire) Optical smoke and class A2 heat detector (AHMB-031 Base) 506b/03BasesAHMB-031 mounting baseCertificate No: 506c-(cl-2) to EN 54-5: 2000 + A1 : 2002Heat DetectorsCertificated ProductsBF-H-0116-2 (2 Wire) Conventional Class A2 rate of rise and fixed temperature Heat detector(AHMB-031 Base)LPCB Ref.No.506c/0118 Jan 2014 197

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsBF-H-0116-3 (3 Wire) Conventional Class A2 rate of rise and fixed temperature Heat detector(AHMB-031 Base)BF-H-0116-4 (4 Wire) Conventional Class A2 rate of rise and fixed temperature Heat detector(AHMB-031 Base)LPCB Ref.No.506c/02506c/03BasesAHMB-031 mounting baseCertificate No: 506a-(cl-3) to EN 54-7 : 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated ProductsLPCB Ref.No.BF-S-0111-2 (2 wire) Conventional Photoelectric smoke detector (AHMB-031-L Base) 506a/02BF-S-0111-3 (3 wire) Conventional Photoelectric smoke detector (AHMB-031-L Base) 506a/03BF-S-0111-4 (4 wire) Conventional Photoelectric smoke detector (AHMB-031-L Base) 506a/04BasesAHMB-L Mounting baseAHMB-031 Mounting baseCeasefire Industries Ltd"Doli Chambers", Flat 602 6th Floor behind strand cinema, Colaba, Mumbai-400 005, IndiaTel: + 91-(0) 22-22854677 • Fax: +91-(0) 22-66349069E-mail: response@ceasefire.in • Website: www.ceasefire.inCertificate No: 117g-(cl-1) to EN54-5:2000Point Heat DetectorsCertificated ProductsDFJ-AE3DCD-CE3ACB-EClass A1S conventional fixed temperature heat detector(YBN-R/6 base)Class CR conventional rate of rise high temperature heat detector(YBN-R/6 base)Analogue addressable Class P heat detector(YBN-R/3 and YBO-R/SCI bases)Meets requirements of EN 54-5:2000 for classes A1R, A1S, BR, BS, CR and CS whenused with ACB-E protocol and classes A1S, BS and CS when used with ATG-E protocol.LPCB Ref.No.117g/02117g/06117g/09BasesYBN-R/3 baseYBN-R/6 standard baseYBO-R/SCI isolator baseCertificate No: 358c-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated ProductsALK-E (WHT)SLV-E3 (WHT)Analogue addressable optical smoke detector (White)(YBN-R/3,YBO-R/SCI,YBO-BS & YBO-BSB bases)Note: Meets the requirements of EN54-7 in low and high sensitivity settings and innormal and low power modesConventional optical smoke detector (White)(YBN-R/6)LPCB Ref.No.358c/03358c/05BasesYBN-R/3YBN-R/6YBO-R/SCIbasestandard baseisolator base198 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSYBO-BSYBO-BSBbase sounderbase sounder and beaconChubb Fire LtdChubb House, Staines Road West, Sunbury on Thames TW16 7AR, United KingdomTel: +44 (0)1932 785588 • Fax: +44 (0)1932 777222E-mail: sales@chubb.co.uk • Website: www.chubb.co.ukCertificate No: 118h to EN 54-7: 2000Point Smoke DetectorsCertificated ProductsResonance High SensitivityLaserAnalogue addressable photoelectric laser smoke detector (B501, B501DG andB5241EFT & B524IEFT-1 bases)Note: meets the requirements of EN 54-7: 2000 at sensitivities 7 to 9 inclusiveLPCB Ref.No.118h/01Bases:B501 Analogue sensor baseB501DG Analogue sensor deep baseB524IEFT Analogue sensor isolator baseConsilium Marine and Safety ABSalsmästaregatan 21 Box 8763, Gothenburg SE402 76, SwedenTel: +46 31 710 77 64 • Fax: +46 31 710 78 00E-mail: cmsab@consilium.se • Website: www.consilium.seCertificate No: 041k-(cl-1) to EN54-5: 2000 + A1: 2002, EN54-7: 2000 + A1: 2002 + A2: 2006 and CEA 4021: 2003Photoelectric smoke and heat detectorsCertificated ProductsLPCB Ref.No.EV-PP Analogue addressable combined photoelectric smoke and class A1 heat sensor 041k/01BasesUB-2 Universal baseUB-6 Universal baseContext Plus LtdExport House, 175 Mauldeth Road, Fallowfield, Manchester M14 6SG, United KingdomTel: +44 (0)161 257 2541 • Fax: +44 (0)161 225 8817E-mail: xportsales@xportsales.com • Website: www.xportsales.comCertificate No: 010u-(cl-2) to EN 54-5: 2000 + A1: 2002Heat DetectorsCertificated Products55000-465IMC55000-475IMCAnalogue addressable Class A2S heat detector45681-213IMC and 45681-505IMC bases)Analogue addressable Class CS heat detector45681-213IMC and 45681-505IMC bases)LPCB Ref.No.010u/04010u/05Bases45681-200IMC45681-213IMCMounting baseCommon mounting base18 Jan 2014 199

PART 1: SECTION 4.1COMMERCIAL DETECTORS45681-505IMCNegative switching isolating baseCertificate No: 010v-(cl-2) to EN 54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated Products55000-665IMCAnalogue addressable optical smoke45681-213IMC and 45681-505IMC bases)LPCB Ref.No.010v/02Bases45681-200IMC45681-213IMC45681-505IMCMounting baseCommon mounting baseNegative switching isolating baseControl Equipment LimitedHillcrest Business Park, Dudley, West Midlands DY2 9AP, United KingdomTel: +44 (0)1384 458651 • Fax: +44 (0)1384 458972E-mail: celsales@controlequipment.co.uk • Website: www.controlequipment.comCertificate No: 681b-(cl-2) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 and CEA4021: 2003Multi-Sensor/Multi-Criteria DetectorsCertificated ProductsFC460PCFIRE CLASS digital addressable photoelectric smoke, Class P heat and CarbonMonoxide detector (4B, 4B-I, and 5B bases)Notes:1. Approved with the following mode configurations:-- UNIV Universal optical smoke and A2S heat multi-criteria detector-RESIL Resilient optical smoke and A2S heat multi-criteria detector- Heat detector at Class A1R- HPO Heat enhanced optical smoke detector at Normal sensitivity2. The Carbon Monoxide toxic gas/CCO modes are not approvedFC460PH FIRE CLASS digital addressable photoelectric smoke and Class P heat detector (4B, 4B-I, and 5B bases)Note:Approved with the following mode configurations:-- Heat detector at Class A1R- Heat detector at Class A2S- OPT Optical smoke detector at High, Normal and Low sensitivity- FL OPT Optical smoke detector at High, Normal and Low sensitivity using FastLogic- HPO Heat enhanced optical smoke at High, Normal and Low sensitivity- FL HPO Heat enhanced optical smoke at High, Normal and Low sensitivity usingFastLogic.LPCB Ref.No.681b/03681b/05Bases4B, 4” universal mounting base4B-I, 4” isolator base5B, 5” universal mounting baseCertificate No: 681c-(cl-2) to EN 54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsLPCB Ref.No.FC460H FIRE CLASS digital addressable Class P heat detector (4B, 4B-I and 5B bases) 681c/10Note:Approved with the following mode configurations:-- Heat detector at Class A1R- Heat detector at Class A2S- Heat detector at Class CRBases200 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORS4B, 4” universal mounting base4B-I, 4” isolator base5B, 5” universal mounting baseCertificate No: 681d-(cl-2) to EN 54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated ProductsFC460PFIRE CLASS digital addressable photoelectric smoke detector(4B, 4B-I and 5B bases)Note:1. Approved with the following mode configurations:-- OPT Optical smoke detector at High, Normal and Low sensitivity- FL OPT Optical smoke detector at High, Normal and Low sensitivity using FastLogicLPCB Ref.No.681d/07Bases4B, 4” universal mounting base4B-I, 4” isolator base5B, 5” universal mounting baseCooper SafetyWheatley Hall Road, Doncaster, South Yorkshire DN2 4NB, United KingdomTel: +44 (0)1302 321541 • Fax: +44 (0)1302 303220Certificate No: 685j-(cl-1) to EN 54-7:2000 + A1:2002 + A2:2006 & EN 54-17:2005Certificate No: 685j-(cl-2) to EN 54-7:2000 + A1:2002 + A2:2006 & EN 54-17:2005Certificate No: 685h-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006Certificate No: 685h-(cl-2) to EN 54-7: 2000 + A1: 2002 + A2: 2006Point Smoke DetectorsCertificated ProductsLPCB Ref.No.685h/01CPD321Conventional photoelectric smoke detector CDBB300, MCBD, CCBD and NDFXN520bases)CPDB321 Conventional photoelectric smoke detector FXCBD, CCBD and NDFXN520 bases) 685h/01FXN533 Conventional photoelectric smoke detector FXCBD and NDFXN520 bases) 685h/01MPD821 Conventional photoelectric smoke detector MCBD and NDFXN520 bases) 685h/01CAP320CAPB320COPP420FXN723MAP820Intelligent analogue addressable photoelectric smoke detectorMABD, FXABD and CABD bases)Intelligent analogue addressable photoelectric smoke detectorMABD, FXABD and CABD bases)Intelligent analogue addressable photoelectric smoke detectorMABD, FXABD and CABD bases)Intelligent analogue addressable photoelectric smoke detectorMABD, FXABD and CABD bases)Intelligent analogue addressable photoelectric smoke detectorMABD, FXABD and CABD bases)685j/01685j/01685j/01685j/01685j/01BasesMDB800MCBDFXCBDNDFXN520FXN520CDB300CDBB300CCBDMAB800CABB300FXN720MABDCABDFXABDCAB300COPA800Single contact standard conventional mounting base (Zener diode)Double contact standard conventional mounting base (Zener diode)Double contact conventional mounting base (Schottky diode)Single contact conventional mounting base (without diode)Single contact conventional mounting base (Schottky diode)Single contact standard conventional mounting base (Zener diode)Single contact conventional mounting base (Schottky diode)Double contact conventional mounting base (Schottky diode)Single contact standard analogue addressable mounting baseSingle contact standard analogue addressable mounting baseSingle contact standard analogue addressable mounting baseDouble contact standard analogue addressable mounting baseDouble contact standard analogue addressable mounting baseDouble contact standard analogue addressable mounting baseSingle contact standard analogue addressable mounting baseSingle contact standard analogue addressable mounting base18 Jan 2014 201

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificate No: 685k-(cl-1) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005 and CEA4021: July2003(en)Certificate No: 685k-(cl-2) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005 and CEA4021: July2003(en)Certificate No: 685g-(cl-1) to EN 54-5: 2000 + A1: 2002 & EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003Certificate No: 685g-(cl-2) to EN 54-5: 2000 + A1: 2002 & EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003Multi-criteria DetectorsCertificated ProductsCPT341CPTB341FXN632MPT951CXN633FXN922Conventional photo/thermal multisensor and Class A2S heat detector CDBB300. MCBD,CCBD and NDFXN520 bases)Conventional photo/thermal multisensor and Class A2S heat detector CCBD andNDFXN520 bases)Conventional photo/thermal multisensor and Class A2S heat detector (FXN520, FXCBDand NDFXN520 bases)Conventional photo/thermal multisensor and Class A2S heat detector MCBD andNDFXN520 bases)Conventional photo/thermal multisensor and Class P heat detector CDBB300, FXCBDand CCBD bases)Notes:1. Meets the requirements of EN 54-7:2000in the following modes:Mode 1 - Thermally enhanced optical smoke detectorSmoke sensitivity 0.15dB/m.Mode 2 - Optical smoke detector.Smoke sensitivity 0.1dB/m.2. Meets the requirements of EN 54-5:2000in the following modes:Mode 3 - Heat detector Class A1RMode 4 - Heat detector Class BSMode 5 - Heat detector Class CSConventional photo/thermal multisensor and Class P heat detector CDBB300, FXCBD,CCBD)Notes:1. Meets the requirements of EN 54-7:2000in the following modes:Mode 1 - Thermally enhanced optical smoke detectorSmoke sensitivity 0.15dB/m.Mode 2 - Optical smoke detector.Smoke sensitivity 0.1dB/m.2. Meets the requirements of EN 54-5:2000in the following modes:Mode 3 - Heat detector Class A1RMode 4 - Heat detector Class BSMode 5 - Heat detector Class CSLPCB Ref.No.685g/01685g/01685g/01685g/01685g/02685g/02MPT922 Conventional photo/thermal multisensor and Class P heat detector FXCBD, CCBD) 685g/02Notes:1. Meets the requirements of EN 54-7:2000in the following modes:Mode 1 - Thermally enhanced optical smoke detectorSmoke sensitivity 0.15dB/m.Mode 2 - Optical smoke detector.Smoke sensitivity 0.1dB/m.2. Meets the requirements of EN 54-5:2000in the following modes:Mode 3 - Heat detector Class A1RMode 4 - Heat detector Class BSMode 5 - Heat detector Class CSCAPT340Intelligent analogue addressable Class A2S multisensor685k/01opto/heat detector MABD, FXABD and CABD bases)Notes:1) Meets the requirements of EN 54-5 and EN 54-7202 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsCAPTB340COPOH450FXN722MAOH850in the following modes:Mode 1 - Photoelectric/heat combined onlyMode 2 - Photoelectric/heat combined together withan alarm output from temperature alone (Class A2S)Mode 3 - Heat detector alone (Class A2S)Intelligent analogue addressable Class A2S multisensoropto/heat detector MABD, FXABD and CABD bases)Notes:1) Meets the requirements of EN 54-5 and EN 54-7in the following modes:Mode 1 - Photoelectric/heat combined onlyMode 2 - Photoelectric/heat combined together withan alarm output from temperature alone (Class A2S)Mode 3 - Heat detector alone (Class A2S)Intelligent analogue addressable Class A2S multisensoropto/heat detector MABD, FXABD and CABD bases)Notes:1) Meets the requirements of EN 54-5 and EN 54-7in the following modes:Mode 1 - Photoelectric/heat combined onlyMode 2 - Photoelectric/heat combined together withan alarm output from temperature alone (Class A2S)Mode 3 - Heat detector alone (Class A2S)Intelligent analogue addressable Class A2S multisensoropto/heat detector MABD, FXABD and CABD bases)Notes:1) Meets the requirements of EN 54-5 and EN 54-7in the following modes:Mode 1 - Photoelectric/heat combined onlyMode 2 - Photoelectric/heat combined together withan alarm output from temperature alone (Class A2S)Mode 3 - Heat detector alone (Class A2S)Intelligent analogue addressable Class A2S multisensoropto/heat detector MABD, FXABD and CABD bases)Notes:1) Meets the requirements of EN 54-5 and EN 54-7in the following modes:Mode 1 - Photoelectric/heat combined onlyMode 2 - Photoelectric/heat combined together withan alarm output from temperature alone (Class A2S)Mode 3 - Heat detector alone (Class A2S)LPCB Ref.No.685k/01685k/01685k/01685k/01BasesMDB800MCBDNDFXN520FXN520FXCBDCDBB300CCBDCDB300MAB800CABB300FXN720MABDCABDFXABDCAB300COPA800CABDSingle contact standard conventional mounting base (Zener diode)Double contact standard conventional mounting base (Zener diode)Single contact conventional mounting base (without diode)Single contact conventional mounting base (Schottky diode)Double contact conventional mounting base (Schottky diode)Single contact conventional mounting base (Schottky diode)Double contact conventional mounting base (Schottky diode)Single contact standard conventional mounting base (Zener diode)Single contact standard analogue addressable mounting baseSingle contact standard analogue addressable mounting baseSingle contact standard analogue addressable mounting baseDouble contact standard analogue addressable mounting baseDouble contact standard analogue addressable mounting baseDouble contact standard analogue addressable mounting baseSingle contact standard analogue addressable mounting baseSingle contact standard analogue addressable mounting baseDouble contact standard analogue addressable mounting baseCertificate No: 685m-(cl-1) to EN 54-5: 2000+A1:2002 & EN 54-17: 2005Certificate No: 685m-(cl-2) to EN 54-5: 2000+A1:2002 & EN 54-17: 200518 Jan 2014 203

PART 1: SECTION 4.1COMMERCIAL DETECTORSHeat DetectorsCertificated ProductsCAH330CAHB330COPH430FXN725MAH830Intelligent analogue addressable Class P heat detectorMABD, FXABD and CABD bases)Notes:1) Meets the requirements of EN 54-5 at classes A1R, BS and CSIntelligent analogue addressable Class P heat detectorMABD, FXABD and CABD bases)Notes:1) Meets the requirements of EN 54-5 at classes A1R, BS and CSIntelligent analogue addressable Class P heat detectorMABD, FXABD and CABD bases)Notes:1) Meets the requirements of EN 54-5 at classes A1R, BS and CSIntelligent analogue addressable Class P heat detectorMABD, FXABD and CABD bases)Notes:1) Meets the requirements of EN 54-5 at classes A1R, BS and CSIntelligent analogue addressable Class P heat detectorMABD, FXABD and CABD bases)Notes:1) Meets the requirements of EN 54-5 at classes A1R, BS and CSLPCB Ref.No.685m/01685m/01685m/01685m/01685m/01BasesMAB800CABB300FXN720CAB300COPA800MABDFXABDCABDCABB300Standard analogue addressable mounting baseStandard analogue addressable mounting baseStandard analogue addressable mounting baseStandard analogue addressable mounting baseStandard analogue addressable mounting baseDouble contact standard analogue addressable mounting baseDouble contact standard analogue addressable mounting baseDouble contact standard analogue addressable mounting baseSingle contact standard analogue addressable mounting baseCertificate No: 685a-(cl-1) to EN 54-5: 2000 + A1: 2002Certificate No: 685a-(cl-2) to EN 54-5: 2000 + A1: 2002Point Heat DetectorsCertificated ProductsLPCB Ref.No.CFR330 Conventional Class A2R heat detector CDBB300. MCBD, CCBD and NDFXN520 bases) 685a/01CFRB330 Conventional Class A2R heat detector CCBD and NDFXN520 bases) 685a/01FXN525 Conventional Class A2R heat detector FXCBD and NDFXN520 bases) 685a/01MFR830 Conventional Class A2R heat detector MCBD and NDFXN520 bases) 685a/01CMT360 Conventional Class BS heat detector CDBB300, MCBD, CCBD, NDFXN520 bases) 685a/02CMTB360 Conventional Class BS heat detector CCBD and NDFXN520 bases) 685a/02FXN524 Conventional Class BS heat detector FXCBD, NDFXN520 bases) 685a/02MMT860 Conventional Class BS heat detector MCBD and NDFXN520 bases) 685a/02CHT390 Conventional Class CS heat detector CDBB300, MCBD, CCBD and NDFXN520 bases) 685a/03CHTB390 Conventional Class CS heat detector CCBD, NDFXN520 bases) 685a/03FXN526 Conventional Class CS heat detector FXCBD, NDFXN520 bases) 685a/03MHT890 Conventional Class CS heat detector MCBD and NDFXN520 bases) 685a/03BasesMDB800MCBDNDFXN520FXN520FXCBDCDB300CDBB300CCBDSingle contact standard conventional mounting base (Zener diode)Double contact standard conventional mounting base (Zener diode)Single contact conventional mounting base (without diode)Single contact conventional mounting base (Schottky diode)Double contact conventional mounting base (Schottky diode)Single contact standard conventional mounting base (Zener diode)Single contact conventional mounting base (Schottky diode)Double contact conventional mounting base (Schottky diode)204 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCooper Sécurité SASParc Européen d’Entreprises II, Rue Beethoven, BP 10184, 63204 Riom Cedex, FranceTel: +44 (0)1302 3397 • Fax: +44 (0)1302 303220E-mail: Fariz.khellaf@cooperindustries.comCertificate No: 685j-(cl-3) to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-17: 2005Certificate No: 685h-(cl-3) to EN 54-7: 2000 + A1: 2002 + A2: 2006Point Smoke DetectorsCertificated ProductsLPCB Ref.No.DOFS3000 Conventional photoelectric smoke detector and NUG30257 bases) 685h/01DOFA3000Intelligent analogue addressable photoelectric smoke detector685j/01and NUG30258 bases)BasesNUG30256NUG30255NUG30257NUG30258Standard analogue addressable mounting baseStandard conventional mounting baseDouble contact standard conventional mounting baseDouble contact standard analogue addressable mounting baseCertificate No: 685m-(cl-3) to EN 54-5: 2000 + A1: 2002 and EN 54-17: 2005Heat DetectorsCertificated ProductsLPCB Ref.No.DTVA3000 Intelligent analogue addressable Class P heat detector and NUG30258 bases) 685m/01Notes:1. Meets the requirements of EN 54-5 at classes A1R, BS and CSBasesNUG30256NUG30258Single contact standard analogue addressable mounting baseDouble contact standard analogue addressable mounting baseCertificate No: 685k-(cl-3) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 , EN 54-17: 2005 and CEA4021: July2003(en)Certificate No: 685g-(cl-1) to EN 54-5: 2000 + A1: 2002 & EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003Multi-Criteria DetectorsCertificated ProductsDMCFS3000DMCFA3000Conventional photo/thermal multisensor and Class A2S heat detector and NUG30257bases)Intelligent analogue addressable Class A2S multisensor opto/heat detector andNUG30258 bases)Notes:1. Meets the requirements of EN 54-5 and EN 54-7in the following modes:Mode 1 - Photoelectric/heat combined onlyMode 2 - Photoelectric/heat combined together withan alarm output from temperature alone (Class A2S)Mode 3 - Heat detector alone (Class A2S)LPCB Ref.No.685g/01685k/01BasesNUG30255NUG30256NUG30257NUG30258Standard conventional mounting baseStandard analogue addressable mounting baseDouble contact standard conventional mounting baseDouble contact standard analogue addressable mounting baseCertificate No: 685a-(cl-3) to EN 54-5: 2000 + A1: 200218 Jan 2014 205

PART 1: SECTION 4.1COMMERCIAL DETECTORSPoint Heat DetectorsCertificated ProductsLPCB Ref.No.DTVS3000 Conventional Class A2R heat detector and NUG30257 bases) 685a/01DTS77°S3000 Conventional Class BS heat detector and NUG30257 bases) 685a/02DTS90°S3000 Conventional Class CS heat detector and NUG30257 bases) 685a/03BasesNUG30255 Single contact standard conventional mounting baseNUG30257 Double contact standard conventional mounting baseDetector Electronics Corporation6901 West 110th Street, Minneapolis, Minesota 55438, USATel: +001 952 946 6488E-mail: detronics@detronics.com • Website: www.det-tronics.comCertificate No: 973a to EN 54-10: 2002 + A1: 2005 and EN 54-17: 2005Certificate No: 973e to EN 54-10: 2002 + A1: 2005Certificated ProductsLPCB Ref.No.X9800 Addressable Class 1 IR flame detector with short circuit isolator 973a/01Note : The isolation is applied on the LON communication transmission path and not thepower transmission path. Refer to the manufacturers installation document 95-8642 withrespect to the number of devices to be connected in a group or zone.X5200 Addressable Class 1 UV / IR flame detector with short circuit isolator 973a/02Note : The isolation is applied on the LON communication transmission path and not thepower transmission path. Refer to the manufacturers installation document 95-8642 withrespect to the number of devices to be connected in a group or zone.X3301 Addressable Class 1 multispectrum IR flame detector with short circuit isolator 973a/03Note: The isolation is applied on the LON communication transmission path and not thepower transmission path. Refer to the manufacturers installation document 95-8642 withrespect to the number of devices to be connected in a group or zone.X2200 Addressable Class 1 UV flame detector with short circuit isolator 973a/04Note: The isolation is applied on the LON communication transmission path and not thepower transmission path. Refer to the manufacturers installation document 95-8642 withrespect to the number of devices to be connected in a group or zone.X9800 Conventional Class 1 IR flame detector 973e/01X5200 Conventional Class 1 UV / IR flame detector 973e/02X3301 Conventional Class 1 multispectrum IR flame detector 973e/03X2200 Conventional Class 1 UV flame detector 973e/04EDS Elektronik Destek San. ve Tic. Ltd. Şti.Meclis Mah. Teraziciller Cad., Kilic Sok., No. 4, Istanbul, 34785 Sangazi, TurkeyTel: +44 (216) 5284500 • Fax: +44 (216) 3141780Certificate No: 1086a to EN 54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated ProductsEC-P2LEC-P2L-3Conventional optical smoke detector 5 pin(EC-DB base)Conventional optical smoke detector 3 pin(EC-DB3 base)LPCB Ref.No.1086a/011086a/02Base:EC-DBEC-DB35 pin base3 pin base206 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSEmergi-Lite Safety Systems (Thomas & Betts Ltd)Bruntcliffe Lane, Morley, Leeds LS27 9LL, United KingdomTel: +44 (0)113 2810600 • Fax: +44 (0)113 2810601Website: www.emergi-lite.co.ukCertificate No: 010p to EN 54-5:2000 + A1:2002Point Heat DetectorsCertificated ProductsLPCB Ref.No.FADY-TEM Analogue addressable heat detector (FA95-ACB mounting base) 010p/03Notes:1) Meets the requirements of EN54: Part 5 -Class A1R in mode 1 and in conventional modeClass A2 in mode 2 and in conventional modeClass A2S in mode 3 and in conventional modeClass CR in mode 4 and in conventional modeClass CS in mode 5 and in conventional mode2) Certificated with Apollo Discovery, XP95, and S90 digital communications protocolsconfigured for the Discovery heat detector in accordance with manufacturers instructions.FAP6-RR6 Conventional Class A1R heat detector (FAP6-STB mounting base) 010p/06Notes:1) Meets the requirements of EN54: Part 5 - Class A1RFAP6-RR75 Conventional Class BR heat detector (FAP6-STB mounting base) 010p/09Notes:1) Meets the requirements of EN54: Part 5 - Class BRFAP6-RR90 Conventional Class CR heat detector (FAP6-STB mounting base) 010p/12Notes:1) Meets the requirements of EN54: Part 5 - Class CRFAP6-FT8 Conventional Class CS heat detector (FAP6-STB mounting base) 010p/15Notes:1) Meets the requirements of EN54: Part 5 - Class CSBases:FAP6-STB Mounting baseCertificate No: 010q to EN 54 - 7:2000 + A1:2002Point Smoke DetectorsCertificated ProductsLPCB Ref.No.FADY-OPT Analogue addressable optical smoke detector (FA95-ACB mounting base) 010q/03Notes:1) Meets the requirements of EN54: Part 7 in modes 1, 2, 3, 4 and 5 and in conventionalmode.2) Certificated with Apollo Discovery, XP95, and S90 digital communications protocolsconfigured for the Discovery heat detector in accordance with manufacturers instructions.FAP6-ION Conventional ionisation smoke detector (FAP6-STB mounting base) 010q/06FAP6-OPT Conventional optical smoke detector (FAP6-STB mounting base) 010q/12Bases;FAP6-STB Mounting baseCertificate No: 010h to EN 54-5:2000 + A1:2002, EN 54-7:2000 + A1:2002, CEA 4021:2003Multi-criteria DetectorsCertificated ProductsLPCB Ref.No.FADY-MUS Analogue addressable multisensor detector (FA95-ACB mounting base) 010h/01Notes:1) Certificated at the following settings:Mode 1 - High sensitivity smoke detector with standard heat enhancementMode 2 - Smoke detection onlyMode 3 - Medium sensitivity smoke detector with standard heat enhancementMode 4 - Low sensitivity smoke detector with high heat enhancement18 Jan 2014 207

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsMode 5 - Class A1 heat detectorAlso approved in conventional alarm modes 1, 2, 3, 4 and 52) Certificated with Apollo Discovery, XP95, and S90 digital communications protocolsconfigured for the Discovery heat detector in accordance with manufacturers instructions.LPCB Ref.No.Bases:FA95-ACB Mounting baseFAP6-STB Diode mounting baseEmirates Fire Fighting Equipment Factory L.L.C. (FIREX)P.O.Box 22436, Industrial Area 13, Sharjah, United Arab EmiratesTel: +971 6 5340300 • Fax: +971 6 5340090E-mail: firex@emirates.net.ae • Website: www.firexuae.comCertificate No: 506a to EN 54-7: 2000Point Smoke DetectorsCertificated ProductsLPCB Ref.No.FX-0311-2 (2 - wire) Conventional photoelectric smoke detector (AHMB-031 Base) 506a/02FX-0311-3 (3 - wire) Conventional photoelectric smoke detector (AHMB-031 Base) 506a/03FX-0311-4 (4 - wire) Conventional photoelectric smoke detector (AHMB-031 Base) 506a/04Bases:AHMB-031 mounting baseCertificate No: 506b to EN 43-7: 2000 + A1: 2002 + A2: 2006, EN 54-5: 2000 + A1: 2002 and CEA 4021: 2003Multi-criteria DetectorsCertificated ProductsLPCB Ref.No.FX-0315-2 (2 - wire) Optical smoke and Class A2 heat detector (AHMB-31 Base) 506b/01FX-0315-3 (3 - wire) Optical smoke and Class A2 detector (AHMB-31 Base) 506b/02FX-0315-4 (4 - wire) Optical smoke and Class A2 heat detector (AHMB-31 Base) 506b/03Bases:AHMB-031 mounting baseCertificate No: 506c to EN54-5: 2000Point Heat DetectorCertificated ProductsFX-0316-2 (2 wire) Conventional Class A2 rate of rise and fixed temperature heat detector (AHMB-31 Base)FX-0316-3 (3 wire) Conventional Class A2 rate of rise and fixed temperature heat detector (AHMB-031 Base)FX-0316-4 (4 wire) Conventional Class A2 rate of rise and fixed temperature heat detector (AHMB-31 Base)LPCB Ref.No.506c/01506c/02506c/03Bases:AHMB-031 mounting base208 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSEmirates Fire Protections Equip. Factory. TR. SectionBehind the Fourth Industrial Estate, Industrial Area 3, UAE PO 22436, Sharjah, United Arab EmiratesTel: 00971 653 40300 • Fax: 00971 653 40090E-mail: QC@firexuae.com • Website: www.firexuae.comCertificate No: 548c-(cl-3) to EN 54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsFX9103FX9103IConventional heat detectorClass A1R (DZ-03 base)Intelligent Rate of Rise Heat DetectorClass A1R (DZ-03 base)LPCB Ref.No.548c/01548c/02Bases:DZ-03 Standard detector baseCertificate No: 548d-(cl-3) to EN 54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated ProductsFX9102FX9102IConventional Photoelectric Smoke Detector(DZ-03 base)Intelligent Photoelectric Smoke Detector(DZ-03 base)LPCB Ref.No.548d/01548d/02Bases:DZ-03 Standard detector baseCertificate No: 548k-(cl-2) to EN 54-12: 2002Beam DetectorsCertificated ProductsLPCB Ref.No.FX9105RI Intelligent optical beam detector 548k/01Notes:1) Meets the requirements of EN 54-12 at the following sensitivity settings:Level 1 - 1.61 dBLevel 2 - 2.31dBEurofyre LimitedUnit C1 Knowle Village Business Park, Mayles Lane, Wickham, Fareham PO17 5DY, United KingdomTel: 01329 830 462E-mail: jon@eurofyre.comCertificate No: 1163a-(cl-1) to EN54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated ProductsLPCB Ref.No.12-020 Conventional Optical Smoke Detector (12-030 base and 12-031 base) 1163a/01Note:1. Meets the requirements of EN 54-7:2000 at Smoke Sensitivity settingrange:0.08%dB~ 0.12%dB16-050 Addressable Optical Smoke Detector (12-030 base and 12-031 base) 1163a/02Note:1. Meets the requirements of EN 54-7:2000 at Smoke Sensitivity setting range:0.09%dB~0.11%dB18 Jan 2014 209

PART 1: SECTION 4.1COMMERCIAL DETECTORSBases:12-030 Shallow Base12-031 Deep BaseCertificate No: 1163b-(cl-1) to EN54-7: 2000 + A1: 2002 + A2: 2006, EN54-5:2000 + A1: 2002 & CEA 4021 July 2003Multi-Sensor/Multi-Criteria DetectorsCertificated ProductsLPCB Ref.No.12-023 Conventional Optical Heat Detector (12-030 base and 12-031 base) 1163b/01Note:1. Meets the requirements of EN 54-7:2000 at Smoke Sensitivity setting range:0.08%dB~0.12%dB2. Meets the requirements of EN 54-5:2000 at Class A216-053 Addressable Optical Heat Detector (12-030 base and 12-031 base) 1163b/02Note:1. Meets the requirements of EN 54-7:2000 at Smoke Sensitivity setting range:0.09%dB~0.12%dB2. Meets the requirements of EN 54-5:2000 at Class A1Bases:12-030 Shallow Base12-031 Deep BaseCertificate No: 1163c-(cl-1) to EN54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsLPCB Ref.No.12-022 Conventional A2S Heat Detector (12-030 base and 12-031 base) 1163c/01Note:1. Meets the requirements of EN 54-5:2000 at Class A2S12-021 Conventional A2R Heat Detector (12-030 base and 12-031 base) 1163c/02Note:1. Meets the requirements of EN 54-5:2000 at Class A2R16-052 Addressable A2S Heat Detector (12-030 base and 12-031 base) 1163c/03Note:1. Meets the requirements of EN 54-5:2000 at Class A2S16-051 Addressable A1R Heat Detector (12-030 base and 12-031 base) 1163c/04Note:1. Meets the requirements of EN 54-5:2000 at Class A1RBases:12-030 Shallow Base12-031 Deep BaseEurotech Fire Systems Limited19/20 Stratfield Park, Elettra Avenue, Waterlooville, Hampshire PO7 7XN, United KingdomTel: +44 (0)203 141 0999 • Fax: +44 (0)239 225 2554E-mail: enquiry@eurotechfire.com • Website: www.eurotechfire.comCertificate No: 041f-(cl-1) to EN54-7: 2000 + A1: 2002 + A2: 2006Certificate No: 842a-(cl-2) to EN54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated ProductsEURV-PEURVC-PAnalogue addressable optical smoke detector (EURB-4, EURB-4-EV, EURB-4SD andEURB-4SE-EV bases)Note: Meets the requirements of EN 54-7 at Lowest and Highest sensitivity settings only.Conventional optical smoke detector(EURB-4, EURB-4-EV, EURB-4SD and EURB-4SE-EV bases)LPCB Ref.No.041f/01041f/03210 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsEURVC-PEURV-PConventional optical smoke detector(EURB-4, EURB-4-EV, EURB-4SD and EURB-4SE-EV bases)Analogue addressable optical smoke detector(EURB-4, EURB-4-EV, EURB-4SD and EURB-4SE-EV bases)Note: Meets the requirements of EN 54-7 at Lowest and Highest sensitivity settings only.LPCB Ref.No.842a/01842a/04BasesEURB-4 universal mounting baseEURB-4-EV universal mounting baseEURB-4SD universal mounting base with schottky diodeEURB-4SE-EV Standard deep baseCertificate No: 041g-(cl-1) to EN 54-5: 2000 + A1: 2002, EN54-7: 2000 + A1: 2002 + A2: 2006 and CEA 4021: 1999Certificate No: 041h-(cl-1) to EN54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsEURV-PHEURV-H-A1REURV-H-CSEURVC-H-A2SEURVC-H-CSAnalogue addressable optical smoke / class A1R heat detector (EURB-4, EURB-4-EV,EURB-4SD and EURB-4SE-EV bases)Note: Meets the requirements of EN 54-7 at Lowest and Highest sensitivity settings.Analogue addressable Class A1R heat detector(EURB-4, EURB-4-EV, EURB-4SD and EURB-4SE-EV bases)Analogue addressable Class CS heat detector(EURB-4, EURB-4-EV, EURB-4SD and EURB-4SE-EV bases)Conventional Class A2S heat detector(EURB-4, EURB-4-EV, EURB-4SD and EURB-4SE-EV bases)Conventional Class CS heat detector(EURB-4, EURB-4-EV, EURB-4SD and EURB-4SE-EV bases)LPCB Ref.No.041g/01041h/01041h/02041h/03041h/04BasesEURB-4 universal mounting baseEURB-4-EV universal mounting baseEURB-4SD universal mounting base with schottky diodeEURB-4SE-EV Standard deep baseEverday Technology Co. LimitedNo,.95., Sec. 2., Ligong 1 St. Road., Letzer Industrial Park, Yilan County 26841, Taiwan ROCTel: +886 3 990 6099 • Fax: +862 3 990 6029E-mail: alex.hsieh@everday.com • Website: www.everday.comCertificate No: 512a to EN 54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated ProductsLPCB Ref.No.EA318-2 Conventional 2 wire photoelectric smoke detector 512a/01(P/N852001 base)EA318-2(LED) Conventional 2 wire photoelectric smoke detector with remote LED output 512a/02(P/N854001 base)EA318-4-12 Conventional 4 wire photoelectric smoke detector 512a/03(P/N854001 base)EA318-4-24 Conventional 4 wire photoelectric smoke detector 512a/04(P/N854001 base)EA318-2VConventional 2 wire photoelectric smoke detector512a/05(P/N852001 base)EA318-2-LED-VConventional 2 wire photoelectric smoke detector with remote LED output (P/N852001 512a/06base)EA318-4V-12Conventional 4 wire photoelectric smoke detector512a/07(P/N854001 base)EA318-4V-24 Conventional 4 wire photoelectric smoke detector 512a/08Bases:18 Jan 2014 211

PART 1: SECTION 4.1COMMERCIAL DETECTORSP/N854001 4-wire detector baseP/N852001 2-wire detector baseCertificate No: 512b to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, CEA4021: 2003Multi-criteria DetectorsCertificated ProductsLPCB Ref.No.EA318-2H Conventional 2 wire photoelectric smoke and heat detector 512b/01(P/N852001 base)EA318-2H-LED Conventional 2 wire photoelectric smoke and heat detector with remote LED output 512b/02(P/N854001 base)EA318-4H-12 Conventional 4 wire photoelectric smoke and heat detector 512b/03(P/N854001 base)EA318-4H-24 Conventional 4 wire photoelectric smoke and heat detector 512b/04(P/N854001 base)EA318-2HV Conventional 2 wire photoelectric smoke and heat detector (P/N852001 base) 512b/05EA318-2H-LED-VConventional 2 wire photoelectric smoke and heat detector with remote LED output 512b/06(P/N8524001 base)EA318-4HV-12 Conventional 4 wire photoelectric smoke and heat detector (P/N854001 base) 512b/07EA318-4HV-24 Conventional 4 wire photoelectric smoke and heat detector (P/N854001 base) 512b/08Bases:P/N854001 4-wire detector baseP/N852001 2-wire detector baseCertificate No: 512d to EN 54-5: 2000 + A1: 2002Point Heat DetectorsCertificated ProductsEA323-2EA323-2EA323-2LEA323-2LEA323-4EA323-4EA323-4EA323-4EA323-2V(A2S)EA323-2V(A2R)EA323-2LV(A2S)EA323-2LV(A2R)EA323-4V-12(A2S)EA323-4V-12(A2R)EA323-4V-24(A2S)EA323-4V-24(A2R)Conventional 2 wire 24VDC class A2S fixed temperature and rate-of-rise heat detector(P/N852001 base)Conventional 2 wire 24VDC class A2R fixed temperature and rate-of-rise heat detector(P/N852001 base)Conventional 2 wire 24VDC class A2S fixed temperature and rate-of-rise heat detectorwith LED output (P/N854001 base)Conventional 2 wire 24VDC class A2R fixed temperature and rate-of-rise heat detectorwith LED output (P/N854001 base)Conventional 4 wire 12VDC class A2S fixed temperature and rate-of-rise heat detector(P/N854001 base)Conventional 4 wire 12VDC class A2R fixed temperature and rate-of-rise heat detector(P/N854001 base)Conventional 4 wire 24VDC class A2S fixed temperature and rate-of-rise heat detector(P/N854001 base)Conventional 4 wire 24VDC class A2R fixed temperature and rate-of-rise heat detector(P/N854001 base)Conventional 2 wire 24 VDC class A2S fixed temperature and rate-of-rise heat detector(P/N852001 base)Conventional 2 wire 24VDC class A2R fixed temperature and rate-of-rise heat detector(P/N852001 base)Conventional 4 wire 12VDC class A2S fixed temperature and rate-of-rise heat detector(P/N854001 base)Conventional 2 wire 24VDC class A2R fixed temperature and rate-of-rise heat detectorwith LED output (P/N852001 base)Conventional 4 wire 12VDC class A2S fixed temperature and rate-of-rise heat detector(P/N854001 base)Conventional 4 wire 12VDC class A2R fixed temperature and rate-of-rise heat detector(P/N854001 base)Conventional 4 wire 24VDC class A2S fixed temperature and rate-of-rise heat detector(P/N854001 base)Conventional 4 wire 24VDC class A2R fixed temperature and rate-of-rise heat detector(P/N854001 base)LPCB Ref.No.512d/01512d/02512d/03512d/04512d/05512d/06512d/07512d/08512d/09512d/10512d/11512d/12512d/13512d/14512d/15512d/16Bases:P/N852001 2-Wire detector baseP/N854001 4-Wire detector base212 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSFike Safety Technology LtdUnit 31, Springvale Industrial Estate, Cwmbran, Gwent NP44 5BD, United KingdomTel: +44 (0)1633 865558 • Fax: +44 (0)1633 866656E-mail: fstinfo@fike.com • Website: www.fikesafetytechnology.co.ukCertificate No: 331f to EN 54-3: 2000 + A1: 2002 + A2: 2006, EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006,EN 54-17: 2005, EN 54-18: 2005 and CEA 4021:July 2003 (en)Certificate No: 331n to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006,EN 54-17:2005, EN 54-18: 2005 and CEA 4021:July 2003 (en)Certificate No: 331g to EN 54-3: 2000 + A1: 2002 + A2: 2006, EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 andCEA 4021: July 2003 (en)Certificate No: 331p to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 and CEA 4021: July 2003 (en)Multi-Sensor DetectorsCertificated Products205-0001 Sita analogue addressable optical smoke and heat multisensor detector with short circuitisolator and sounder.Notes:1. Meets the requirements of EN 54-5:2000 at the following settings:HM1 Class A1 standard temperature rate of rise enhancedHM2 Class A1 standard temperature, fixed temperature.LPCB Ref.No.331f/012. Meets the requirements of EN 54-7:2000 at the following settings:SM1 Standard optical sensitivity with high thermal enhancementSM2 Standard optical sensitivity with normal thermal enhancement.3. Approved at the following tones -SP1 Continuous 970HzSP2 Pulsed 970Hz 1s on 1s offSP3 Dual Tone 970Hz 0.25s , 800Hz 0.25sSP4* Sweep Up 800-970Hz over 1sSP5 Slow Whoop 500-1200Hz over 3s, 0.5s offSP6* Sweep Down 1200-500Hz over 1sSP7 Dual French 550Hz 0.1s, 440Hz 400ms* Not available if the I/O facility is used.205-0012 Sita analogue addressable optical smoke and heat multisensor detector with short circuitisolator and sounder/strobe.Notes:1. Meets the requirements of EN 54-5:2000 at the following settings:HM1 Class A1 standard temperature rate of rise enhancedHM2 Class A1 standard temperature, fixed temperature.331f/022. Meets the requirements of EN 54-7:2000 at the following settings:SM1 Standard optical sensitivity with high thermal enhancementSM2 Standard optical sensitivity with normal thermal enhancement.3. Approved at the following tones -SP1 Continuous 970HzSP2 Pulsed 970Hz 1s on 1s offSP3 Dual Tone 970Hz 0.25s , 800Hz 0.25sSP4* Sweep Up 800-970Hz over 1sSP5 Slow Whoop 500-1200Hz over 3s, 0.5s offSP6* Sweep Down 1200-500Hz over 1sSP7 Dual French 550Hz 0.1s, 440Hz 400ms* Not available if the I/O facility is used.4. The strobe function is not approved.202-0001 Twinflex conventional optical smoke and heat multisensor detector with sounder 331g/01Notes:1. Meets the requirements of EN 54-5:2000 at the following settings:HM1 Class A1 standard temperature rate of rise enhancedHM2 Class A1 standard temperature, fixed temperature.2. Meets the requirements of EN 54-7:2000 at the following settings:SM1 Standard optical sensitivity with high thermal enhancementSM2 Standard optical sensitivity with normal thermal enhancement.3. Approved at the following tones -18 Jan 2014 213

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsSP1 Continuous 970HzSP2 Alternating Tone 800 0.25s / 970Hz 0.25sSP3 Sweep Up 800-970Hz over 1s205-0003 Sita analogue addressable optical smoke and heat multisensor detector with short circuitisolator.Notes:1. Meets the requirements of EN 54-5:2000 at the following settings:HM1 Class A1 standard temperature rate of rise enhancedHM2 Class A1 standard temperature, fixed temperature.LPCB Ref.No.331n/012. Meets the requirements of EN 54-7:2000 at the following settings:SM1 Standard optical sensitivity with high thermal enhancementSM2 Standard optical sensitivity with normal thermal enhancement.202-0003 Twinflex conventional optical smoke and heat multisensor detector 331p/01Notes:1. Meets the requirements of EN 54-5:2000 at the following settings:HM1 Class A1 standard temperature rate of rise enhancedHM2 Class A1 standard temperature, fixed temperature.2. Meets the requirements of EN 54-7:2000 at the following settings:SM1 Standard optical sensitivity with high thermal enhancementSM2 Standard optical sensitivity with normal thermal enhancement.Bases45-0048-202 ASD Base25-0065-202 Base extension45-0306-202 Twinflex Multipoint BaseFinder Elektronik A.S.Liman Mah., 6. Sok., No: 10 07070, Konyaalti, Antalya, TurkeyTel: +9 0242 344 2500 • Fax: +9 0242 344 2120E-mail: finder@finder.com.tr • Website: www.finder.com.trCertificate No: 928a-(cl-1) to EN 54-5: 2000 + A1: 2002 and EN 54 -17: 2005Certificate No: 928d-(cl-1) to EN 54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsLPCB Ref.No.FF T200 Analogue addressable Class P heat detector with short circuit isolator (FF BS200 base) 928a/01Notes1. Meets the requirements of EN 54-5 for Class A1R and Class BFF T200L Analogue addressable Class P, temperature detector (FF BS200 base) 928d/01Notes1. Meets the requirements of EN 54-5 for Class A1R and Class BFF T1000 Conventional Class P, heat detector (FF UBR200 and FF BRD200 bases) 928d/02Note:1. Meets the requirements of EN 54-5 for Class A1R and Class B.BasesFF BS200FF UBR200FF BRD200Mounting base (with link resistor)Universal adaptor base with resistorUniversal adaptor base with resistor and Schottky diodeCertificate No: 928b-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54 -17: 2005Certificate No: 928e-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006Certificate No: 928k-(cl-5) to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-25: 2008214 18 Jan 2014

Smoke DetectorsCertificated ProductsPART 1: SECTION 4.1COMMERCIAL DETECTORSLPCB Ref.No.928b/01FF O200Analogue addressable photoelectric smoke detector with short circuit isolator (FF BS200base)Notes1. Meets the requirements of EN 54-7 at the following sensitivity settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowFF O200L Analogue addressable optical smoke detector (FF BS200 base) 928e/01Notes1. Meets the requirements of EN 54-7 at the following sensitivity settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowFF O1000 Conventional photo smoke detector (FF UBR200 and FF BRD200 bases) 928e/02FF SG100 Wireless optical smoke detector (WAB100 base) 928k/01Notes:1. Meets the requirements of EN 54-7 in the normal sensitivity setting2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR2032A (3 Vdc) - secondary batteryBasesFF BS200FF UBR200FF BRD200WAB100Mounting base (with link resistor)Universal adaptor base with resistorUniversal adaptor base with resistor and Schottky diodeWireless Adaptor BaseCertificate No: 928c-(cl-1) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54 -17: 2005 & CEA 4021: 2003Certificate No: 928f-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006Multi-sensor DetectorsCertificated ProductsLPCB Ref.No.928c/01FT OT200Analogue addressable Class P heat and photoelectric smoke multi-sensor detector withshort circuit isolator (FF BS200 base)Notes:1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings:Multi Criteria Level 1 (most sensitive) - Thermally enhanced smoke detectionwith Class A1 heat responseMulti Criteria Level 2 - Thermally enhanced smoke detection with Class A1heat responseMulti Criteria Level 3 - Thermally enhanced smoke detection with Class A1heat responseMulti Criteria Level 4 (least sensitive) - Thermally enhanced smoke detectionwith Class A1 heat response2. Meets the requirements of EN 54-5 (Class A1R) at the following settings:Class A1R heat only response3. Meets the requirements of EN 54-7 at the following settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowFF OT200L Analogue addressable optical smoke detector (FF BS200 base) 928f/01Notes1. Meets the requirements of EN 54-7 at the following sensitivity settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowBasesFF BS200Mounting base (with link resistor)Certificate No: 928j-(cl-5) to EN 54-5: 2000 + A1: 2002 and EN 54-25: 200818 Jan 2014 215

PART 1: SECTION 4.1COMMERCIAL DETECTORSPoint Heat DetectorsCertificated ProductsLPCB Ref.No.FF SG350 Wireless heat detector (WAB100 base) 928j/01Notes:1. Meets the requirements of EN 54-5 for Class A1R2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR2032A (3 Vdc) - secondary batteryBases:WAB100Wireless Adaptor BaseCertificate No: 928m-(cl-5) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-25: 2008 and CEA 4021: 2003Multi-Criteria DetectorsCertificated ProductsLPCB Ref.No.FF SG200 Wireless multi-criteria detector (WAB100 base) 928m/01Notes:1. Meets the requirements of EN 54-5 for Class A12. Meets the requirements of EN 54-7 in the normal sensitivity setting3. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR2032A (3 Vdc) - secondary batteryBases:WAB100Wireless Adaptor BaseFireguard Safety Equipment Co Ltd2nd Floor, 145-147 St John Street, London EC1V 4PY, United KingdomTel: +44 (0)8450 751042 • Fax: +44 (0)845 2991039E-mail: info@fireguard-uk.com • Website: www.fireguard-uk.comCertificate No: 512a-(cl-4) to EN 54-7: 2000 + A1: 2002 + A2: 2006Certificate No: 928e-(cl-7) to EN 54-7: 2000 + A1: 2002 + A2: 2006Certificated ProductsFireguard FG318-2LFGSD100Conventional 2 wire photoelectric smoke detector with remove LED output (FireguardP/N FG854001 base)Analogue addressable photoelectric smoke detector lite (VB100, UB100, VB100S,UB100S, VDBS100, DBS100, VDBS100S and DBS100S bases)Note:1. Meets the requirements of EN 54-7 at the following sensitivity settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowLPCB Ref.No.512a/02928e/01BasesVB100UB100VB100SUB100SVDBS100DBS100VDBS100SDBS100SFireguard P/N FG854001Vega adaptor base (with link resistor)Universal adaptor baseVega adaptor base with shorting clipUniversal adaptor base with shorting clipVega deep adaptor baseDeep adaptor baseVega deep adaptor base with shorting clipDeep adaptor base with shorting clip4 wire detector baseCertificate No: 512d-(cl-4) to EN54-5: 2000 + A1: 2002Certificate No: 928d-(cl-7) to EN 54-5: 2000 + A1: 2002216 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsFireguard FG323-2LFGHD350Conventional 2 wire 24VDC class A2R fixed temperature and rate-of-rise heat detectorwith LED output (Fireguard P/N FG854001 base)Analogue addressable Class P heat detector lite (VB100, UB100, VB100S, UB100S,VDBS100, DBS100, VDBS100S and DBS100S bases)Note:1. Meets the requirements of EN 54-5 for Class A1R and Class BLPCB Ref.No.512d/04928d/01BasesVB100UB100VB100SUB100SVDBS100DBS100VDBS100SDBS100SFireguard P/N FG854001Vega adaptor base (with link resistor)Universal adaptor baseVega adaptor base with shorting clipUniversal adaptor base with shorting clipVega deep adaptor baseDeep adaptor baseVega deep adaptor base with shorting clipDeep adaptor base with shorting clip4 wire detector baseFirelite by Honeywell (Pittway Systems Technology Group (Europe) Ltd)Honeywell Life Safety Systems, Charles Avenue, Burgess Hill, West Sussex RH15 9UF, United KingdomTel: +44 1444 230 300 • Fax: +44 1444 230 888E-mail: sales@morleyias.co.ukCertificate No: 550a to EN 54-7: 2000 + A1: 2002Certificate No: 550b to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 and CEA 4021: 1999Certificate No: 550c to EN 54-5: 2000 + A1: 2002Multi-Sensor/Multi-Criteria DetectorsCertificated ProductsFL/1003FL/1002FL/1005Conventional photoelectric smoke detector(FL/1000B base)Conventional optical/thermal detector(FL/1000B base)Notes:1. Meets the requirements of EN54-5 at class A1R at pre-set sensitivity.Conventional Class A1R rate of rise heat detector(FL/1000B base)LPCB Ref.No.550a/02550b/02550c/03BasesFL/1000B standard baseFireonica Co. Ltd2 The Dingle, Wolverhampton WV3 9ET, United KingdomTel: 01902 762 163 • Fax: 0845 299 1039E-mail: info@fireguard-uk.comCertificate No: 928d-(cl-8) to EN 54-5: 2000 + A1: 2002Certificate No: 928e-(cl-8) to EN 54-7: 2000 + A1: 2002 + A2: 2006Certificated ProductsFOHD350FOSD100Analogue addressable Class P heat detector lite (VB100, UB100, VB100S, UB100S,VDBS100, DBS100, VDBS100S and DBS100S bases)Note:1. Meets the requirements of EN 54-5 for Class A1R and Class BAnalogue addressable photoelectric smoke detector lite (VB100, UB100, VB100S,UB100S, VDBS100, DBS100, VDBS100S and DBS100S bases)Note:1.Meets the requirements of EN 54-7 at the following sensitivity settings:LPCB Ref.No.928d/01928e/0118 Jan 2014 217

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsOptical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowLPCB Ref.No.BasesVB100UB100VB100SUB100SVDBS100DBS100VDBS100SDBS100SVega adaptor base (with link resistor)Universal adaptor baseVega adaptor base with shorting clipUniversal adaptor base with shorting clipVega deep adaptor baseDeep adaptor baseVega deep adaptor base with shorting clipDeep adaptor base with shorting clipGent By Honeywell (Novar Systems Ltd)140 Waterside Road, Hamilton Industrial Park, Leicester LE5 1TN, United KingdomTel: +44 (0)116 246 2000 • Fax: +44 (0)116 246 2300E-mail: gent_enquiry@gent.co.uk • Website: www.gent.co.ukMiddle East Sales Enquiries:E-mail: gent.export@honeywell.comCertificate No: 042bd to EN54-7: 2000+A1: 2002+A2: 2006, EN54-17: 2005, EN54-18: 2005Certificate No: 042az to EN 54-7: 2000 + A1: 2002 + A2: 2006Point Smoke DetectorsCertificated Products17840-01 Conventional optical smoke detector (17800-01, 17800-02, 17801-01, 17801-02mounting bases)S4-715 S-Quad analogue addressable optical smoke detector Standard base with or without S4-FLUSH semi-flush fixing kit)Note:1) Meets the requirements of EN 54: Part 7 at the following settings:State 0 - Medium opticalLPCB Ref.No.042az/01042bd/01Bases:78200-01NM standard base17800-01 standard base17801-01 standard base with diode17800-02 low profile base17801-02 low profile base with diodeS4-700 Standard baseS4-FLUSH Semi-flush fixing kitCertificate No: 567b to BS 5445: Part 5: 1977 This certificate is to a withdrawn standard. Detectors conforming to this standardare not suitable for use within the jurisdiction of the European Union (EU). This certificate, to the withdrawn standard, ismaintained because detectors meeting the withdrawn standard requirements are still requested by some regulators outside theEU.Certificate No: 042ak to EN 54-5: 2000 + A1: 2002, EN 54-3: 2001 + A1: 2002 + A2: 2006, EN 54-17: 2005 and EN 54-18: 2005Certificate No: 042be to EN54-5: 2000+A1: 2002, EN54-17: 2005, EN54-18: 2005Certificate No: 042ay to EN 54-5: 2000 + A1: 2002Point Heat DetectorsCertificated ProductsS4-780 S-Quad analogue addressable Class P heat detector with sounder (S4-700 Standardbase with or withoutS4-FLUSH semi-flush mounting kit)Notes:1) Meets the requirements of EN 54: Part 5 at the following settings:LPCB Ref.No.042ak/01218 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsS4-720-ST-VOState 0 - Class A1State 5 - Class B2) Meets the requirements of EN 54: Part 3 at the following sounder tone settings:High - Continuous 933 HzAlternate - High 933 Hz for 0.25 secs / Low 700 Hz for 0.25 secsS-Quad analogue addressable Class P heat detector with strobe and speech(S4-700 Standard base with or without S4-FLUSH semi-flush mounting kitNote:1. Meets the requirements of EN 54: Part 5 at the following settings:State 0 - Class A1State 5 - Class B2. Meets the requirements of EN 54: Part 3 at the followingsounder tone settings:High - Continuous 933 HzAlternate - High 933 Hz for 0.25 secs / Low 700 Hz for 0.25 secs3. Strobe not included in scope of approval.4. Speech function is not approved against Annex C requirements of EN 54-3LPCB Ref.No.042ak/02S4-780-STS-Quad analogue addressable Class P heat detector with sounder and strobe(S4-700 Standard base with or without S4-FLUSH semi-flush mounting kit)Notes:1. Meets the requirement of EN 54: Part 5 at the following settings:State 0 - Class A1State 5 - Class B2. Meets the requirements of EN 54: Part 3 at the following sounder tone settings:High - Continuous 933 HzAlternate - High 933 Hz for 0.25 secs / Low 700 Hz for 0.25 secs3. Strobe not included in scope of approval.17850-01 Conventional Class A1 fixed temperature heat detector (17800-01, 17800-02, 17801-01,17801-02 mounting bases)17860-01 Conventional Class A1 rate of rise heat detector (17800-01, 17800-02, 17801-01, 17801-02 mounting bases)S4-720 S-Quad analogue addressable Class P heat detector (S4-700 Standard base with orwithout S4-FLUSH semi-flush mounting kit)Note:Meets the requirement of EN 54: Part 5 at the following settings:State 0 - Class A1State 5 - Class B17850-01 Conventional grade 1 fixed temperature heat detector (17800-01, 17801-01, 17800-02and 17801-02 bases)Note: This product is certificated to a withdrawn standard. Detectors conforming to thisstandard are not suitable for use within the jurisdiction of the European Union (EU). Thecertification, to the withdrawn standard, is maintained because detectors meeting thewithdrawn standard requirements are still requested by some regulators outside the EU.17860 -01 Conventional grade 1 rate-of-rise heat detector (17800-01, 17801-01, 17800-02 and17801-02 bases)Note: This product is certificated to a withdrawn standard. Detectors conforming to thisstandard are not suitable for use within the jurisdiction of the European Union (EU). Thecertification, to the withdrawn standard, is maintained because detectors meeting thewithdrawn standard requirements are still requested by some regulators outside the EU.042ak/03042ay/01042ay/02042be/01567b/01567b/02Bases:17800-01 standard base17801-01 standard base with diode17800-02 low profile base17801-02 low profile base with diodeS4-700 standard baseS4-FLUSH semi-flush fixing kitCertificate No: 042am to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005 and EN 54-18: 2005 andCEA 4021:2003Certificate No: 042an to EN 54-5: 2000 + A1: 2002 + A2: 2006, EN 54-5: 2000 + A1: 2002, EN 54-3: 2001 + A1:2002 + A2: 2006, EN54-17: 2005, EN 54-18: 2005 and CEA 4021: 2003Certificate No: 042bf to EN54-5: 2000+A1: 2002, EN54-7: 2000+A1: 2002+A2: 2006, EN54-17: 2005, EN54-18: 200518 Jan 2014 219

PART 1: SECTION 4.1COMMERCIAL DETECTORSMulti-criteria DetectorsCertificated ProductsS4-711-STS-Quad analogue addressable dual optical smoke and Class P heat multisensor detectorwith strobe (S4-700 Standard base with or without S4-FLUSH semi-flush mounting kit)Notes:1) Meets the requirement of EN 54: Part 5 and requirements of EN 54: Part 7 at thefollowing settings:State 0 - Medium optical / Class A1 heatState 5 - Medium optical / Class B heatState 8 - Delayed medium optical / Class A1 heat2) The strobe function is not included within the scope of this approvalS4-911 S-Quad analogue addressable dual optical smoke, Class P heat and carbon monoxidemultisensor detector (S4-700 Standard base with or without S4-FLUSH semi-flushmounting kit)Notes:1) Meets the requirement of EN 54: Part 5 and requirements of EN 54: Part 7 at thefollowing settings:State 0 - Medium optical / Class A1 heat2) Meets the requirements of EN 54: Part 5 at the following settings:State 9 - Class A1 heat3) Carbon monoxide detection is not included within the scope of this approvalS4-711-ST-VOS-Quad analogue addressable dual optical smoke and Class P heat multisensor detectorwith speech andstrobe (S4-700 Standard base with or without S4-FLUSH semi-flush mounting kit)Notes:1) Meets the requirement of EN 54: Part 5 and requirements of EN 54: Part 7 at thefollowing settings:State 0 - Medium optical / Class A1 heatState 5 - Medium optical / Class B heatState 8 - Delayed medium optical / Class A1 heat2) Meets the requirements of EN 54: Part 3 at the following sounder tone settings:High - Continuous 933 HzAlternate - High 933 Hz for 0.25 secs / Low 700 Hz for 0.25 secs3) Speech function is not approved against Annex C requirements of EN 54-3S4-771 S-Quad analogue addressable dual optical smoke and Class P heat multisensor detectorwith sounder (S4-700 Standard base with or without S4-FLUSH semi-flush mounting kit)Notes:1) Meets the requirement of EN 54: Part 5 and requirements of EN 54: Part 7 at thefollowing settings:State 0 - Medium optical / Class A1 heatState 5 - Medium optical / Class B heatState 8 - Delayed medium optical / Class A1 heat2) Meets the requirements of EN 54: Part 3 at the following sounder tone settings:High - Continuous 933 HzAlternate - High 933 Hz for 0.25 secs / Low 700 Hz for 0.25 secsS4-911-ST-VOS-Quad analogue addressable optical smoke, heat and carbon monoxide multisensordetectorwith speech and strobe (S4-700 Standard base with or without S4-FLUSH semi-flushmounting kit)Notes:1) Meets the requirements of EN 54: Part 5 and requirements of EN 54: Part 7 at thefollowing settings:State 0 - Medium optical / Class A1 heat2) Meets the requirements of EN 54: Part 5 at the following settings:State 9 - Class A1 heat3) Meets the requirements of EN 54: Part 3 at the following sounder tone settings:High - Continuous 933 HzAlternate - High 933 Hz for 0.25 secs / Low 700 Hz for 0.25 secs4) Carbon monoxide detection, speech and strobe not included within the scope of thisapproval5) Speech function is not approved against Annex C requirements of EN 54-3S4-770 S-Quad analogue addressable optical smoke and Class A1 heat multisensor detectorwith sounder (S4-700 Standard base with or without S4-FLUSH semi-flush mounting kit)Note:1) Meets the requirement of EN 54: Part 5 and requirements of EN 54: Part 7 at thefollowing settings:State 0 - Medium optical / Class A1 heat2) Meets the requirements of EN 54: Part 3 at the following sounder tone settings:High - Continuous 933 HzAlternate - High 933 Hz for 0.25 secs / Low 700 Hz for 0.25 secsS4-711-VOS-Quad analogue addressable dual optical smoke and Class P heat multisensor detectorwith speech (S4-700 Standard base with or without S4-FLUSH semi-flush mounting kit)Note:LPCB Ref.No.042am/02042am/03042an/01042an/02042an/03042an/04042an/05220 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated Products1) Meets the requirement of EN 54: Part 5 and requirements of EN 54: Part 7 at thefollowing settings:State 0 - Medium optical / Class A1 heatState 5 - Medium optical / Class B heatState 8 - Delayed medium optical / Class A1 heat2) Meets the requirements of EN 54: Part 3 at the following sounder tone settings:High - Continuous 933 HzAlternate - High 933 Hz for 0.25 secs / Low 700 Hz for 0.25 secs3) Speech function is not approved against Annex C requirements of EN 54-3LPCB Ref.No.S4-770-STS-Quad analogue addressable optical smoke and Class A1 heat multisensor detectorwith sounder and strobeStandard base with or without S4-FLUSH semi-flush mounting kit)Notes:1) Meets the requirement of EN 54: Part 5 and requirements of EN 54: Part 7 at thefollowing settings:State 0 - Medium optical / Class A1 heat2) Meets the requirements of EN 54: Part 3 at the following sounder tone settings:High - Continuous 933 HzAlternate - High 933 Hz for 0.25 secs / Low 700 Hz for 0.25 secs3) Strobe not included in scope of approval.S4-710 S-Quad analogue addressable optical smoke and Class A1 heat multisensor detector(S4-700 Standard base with or without S4-FLUSH semi-flush mounting kit)Note:1) Meets the requirement of EN 54: Part 5 and requirements of EN 54: Part 7 atthe following settings:State 0 - Medium optical / Class A1 heatS4-711 S-Quad analogue addressable dual optical smoke and Class P heat multisensor detector(S4-700 Standard base with or without S4-FLUSH semi-flush fixing kit)Notes:1) Meets the requirement of EN 54: Part 5 and requirements of EN 54: Part 7 at thefollowing settings:State 0 - Medium optical / Class A1 heatState 5 - Medium optical / Class B heatState 8 - Delayed medium optical / Class A1 heat042an/06042bf/01042bf/02Bases:S4-700 standard baseS4-FLUSH semi-flush fixing kitCertificate No: 042bh to EN 54-12: 2002 and EN 54-17: 2005Beam DetectorsCertificated ProductsS4-34740 Analogue addressable optical beam smoke detector with short circuit isolator( S4-34741-01 and S4-34741-03)Notes:1. The S4-34740 beam sensor pair comprises of an S4-34741 beam transmitter,plus an S4-34742 beam receiver.2. Meets the requirements of EN 54-12 at the following sensitivity settings:States 0, 1: 3.01dBStates 2, 3: 1.25dBLPCB Ref.No.042bh/01Ancillaries:S4-34741-01 beam angle bracketS4-34741-03 beam parallel bracketGEZE GmbHReinhold-Vöster-Str. 21-29, D-71229 Leonberg, GermanyTel: +49 (0)7152-203-0 • Fax: +49 (0)7152-203-310E-mail: sales@geze.com • Website: www.geze.comCertificate No: 928d-(cl-10) to EN 54-5: 2000 + A1: 200218 Jan 2014 221

PART 1: SECTION 4.1COMMERCIAL DETECTORSPoint Heat DetectorsCertificated ProductsGC003 DConventional non-latching Class P heat detector (GC 150B relay base and GC160 Bbase)Note:1. Meets the requirements of EN 54-5 for Class A1R and Class BLPCB Ref.No.928d/02BaseGC160 BUniversal adaptor baseCertificate No: 928e-(cl-10) to EN 54-7: 2000 + A1: 2002 + A2: 2006Point Smoke DetectorsCertificated ProductsGC002 DConventional non-latching photo smoke detector (GC150 B relay base and GC160 Bbase)LPCB Ref.No.928e/02BasesGC150 B Non-latching relay baseGC160 B Universal adaptor baseGulf Security Technology Co., Ltd.No 80 Changjiang East Road, QETDZ, Qinhuangdao, Hebei Province 066004, ChinaTel: +86 0335 8502434 • Fax: +86 0335 8502532E-mail: sales@fs.utc.com • Website: www.gst.com.cnSales Enquiries:Tel: +852 28778566 • Fax: +852 25118699Tel: +86 (10)64392919 • Fax: +86 (10)64391767Certificate No: 548c to EN 54-5: 2000 + A1: 2002Point Heat DetectorsCertificated ProductsLPCB Ref.No.C-9103 Conventional Class A1R heat detector (DZ-03 base) 548c/01I-9103 Intelligent Class A1R Rate of Rise Heat Detector (DZ-03 base) 548c/02Bases:DZ-03 Standard detector baseCertificate No: 548d to EN 54-7: 2000 + A1: 2002 + A2: 2006Point Smoke DetectorCertificated ProductsLPCB Ref.No.C-9102 Conventional Photoelectric Smoke Detector (DZ-03 base) 548d/01I-9102 Intelligent Photoelectric Smoke Detector (DZ-03 base) 548d/02Bases:DZ-03 standard detector baseCertificate No: 548k to EN 54-12: 2002222 18 Jan 2014

Beam DetectorsCertificated ProductsPART 1: SECTION 4.1COMMERCIAL DETECTORSLPCB Ref.No.I-9105R Intelligent optical beam detector 548k/01Notes:1) Meets the requirements of EN 54-12 at the following sensitivity settings:Level 1 - 1.61 dBLevel 2 - 2.31 dBCertificate No: 548q to EN54-5: 2000 + A1:2002, EN54-7: 2000 + A1: 2006, CEA 4021: 2003Multi-Sensor/Multi-Criteria DetectorsCertificated ProductsC-9101 Conventional Optical Smoke and Heat Multisensor Detector(P-9907 Base, DZ-03D Base & DZ-03 Base)Notes:1. Meets the requirements of EN 54-7: 2000 at sensitivity setting Mode 12. Meets the requirement of EN 54-5: 2000 at Class A2RI-9101 Intelligent Optical Smoke and Heat Multisensor Detector(DZ-03 Base)Notes:1. Meets the requirements of EN 54-7: 2000 at sensitivity setting Mode 12. Meets the requirement of EN 54-5: 2000 at Class A2RLPCB Ref.No.548q/01548q/02Bases:DZ-03 Standard baseP-9907 Active EOL baseDZ-03D Diode BaseHDRGrosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, United KingdomTel: +44 (0)1634 260133 • Fax: +44 (0)1634 260132E-mail: info@hochikieurope.com • Website: www.hochikieurope.comCertificate No: 117f to EN54-7: 2000 + A1: 2002, EN54-5: 2000 + A1: 2002 and CEA 4021: 1999Multi-Criteria DetectorsCertificated ProductsLPCB Ref.No.1410010 Intelligent analogue addressable multisensor (YBN-R/3 base) 117f/01Note: Meets EN 54-5 class A1 and B and EN 54-7 at 3.0%/m sensitivity setting in normaland low power mode.Certificate No: 117g to EN 54 Part 5: 2000Point Heat Detectors/SensorsCertificated ProductsLPCB Ref.No.117g/021215110 Class A1S conventional fixed temperature heat detector (YCA-RL/3H2M, YBN-R/6SKand 1226150)1215120 Class CS conventional fixed temperature heat detector (YCA-RL/3H2M, YBN-R/6SK and 117g/031226150 bases)1217180 Class A1R conventional rate of rise temperature heat detector (YCA-RL/3H2M, YBN- 117g/04R/6SK and 1226150 bases)1217190 Conventional Class CR rate of rise high temperature heat detector (YBN-R/6SK and 117g/061226150 bases)1410020 Intelligent analogue addressable Class P heat detector (1426010 and 1226110 bases) 117g/09Note: Meets requirements of EN54-5: 2000 for classes A1R, A1S, BR, BS, CR and CSwhen used with ACB-E protocol and classes A1S, BS and CS when used with ATG-Eprotocol.Bases:18 Jan 2014 223

PART 1: SECTION 4.1COMMERCIAL DETECTORS1226150 Standard base1426010 Standard baseYCA-RL/3H2M Addressable baseYBN-R/6SK Schottky diode baseCertificate No: 117j to EN 54-12: 2002Beam DetectorsCertificated ProductsLPCB Ref.No.1213060 Optical Beam Smoke Detector 117j/01Note: Certified at a sensitivity setting of 30% obscuration1213080 Conventional 2 wire optical beam smoke detector 117j/03Notes:1) Approved at sensitivity setting 25% and 50%.2) Approved for use with 1213080 2WI interface kit.Certificate No: 358c to EN 54-7: 2000 + A1: 2002 + A2: 2006Point Smoke Detectors/SensorsCertificated Products1412110 Intelligent analogue addressable optical smoke detector(YBN-R/3,YBO-R/SCI,YBO-BS & YBO-BSB bases)Note: Meets the requirements of EN54-7 in low and high sensitivity settings and innormal and low power modes1412120 Intelligent analogue addressable optical smoke detector(YBN-R/3,YBO-R/SCI,YBO-BS & YBO-BSB bases)Note: Meets the requirements of EN54-7 in low and high sensitivity settings and innormal and low power modes1212270 Conventional optical smoke detector(YBN-R/6,YBN-R/6SK,YBO-R/6R,YBO-R/6RS,YBO-R/6RN & YBO-R/6PA bases)1212280 Conventional optical smoke detector(YBN-R/6,YBN-R/6SK,YBO-R/6R,YBO-R/6RS,YBO-R/6RN & YBO-R/6PA bases)LPCB Ref.No.358c/03358c/04358c/05358c/06BasesYBN-R/3YBO-R/SCIYBO-BSYBO-BSBYBN-R/6YBN-R/6SKYBO-R/6RYBO-R/6RSYBO-R/6RNYBO-R/6PAStandard basePositive switching short circuit isolator baseSounder baseSounder base with BeaconStandard baseStandard base with schottky diodeRelay baseRelay base latching with schottky diodeRelay base non latchingProtector alarms baseHochiki America Corporation7051 Village Drive, Buena Park, California 90621, USATel: +1 714 522 2246 • Fax: +1 714 522 2268E-mail: sales@hochiki.com • Website: www.hochiki.comCertificate No: 358d to EN 54-10: 2002 + A1: 2005Flame DetectorsCertificated ProductsLPCB Ref.No.358d/01IR3 Conventional IR 3 Flame Detector(IR-AMB)Note: Meets EN 54-10: 2002 at Class 1 onlyIR3-IS Conventional IR 3 Intrinsically Safe Flame Detector 358d/02Note: Meets EN 54-10: 2002 at Class 1 onlyIR3-EX Conventional IR 3 (Exd) Flameproof Flame Detector(IR-AMB)Note: Meets EN 54-10: 2002 at Class 1 only358d/03224 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsIR2-UVConventional UV/IR² Flame Detector(IR-AMB)Note: Meets EN 54-10: 2002 at Class 1 onlyIR2-UV-EX Conventional UV/IR 2 (Exd) Flameproof Flame Detector(IR-AMB)Note: Meets EN 54-10: 2002 at Class 1 onlyLPCB Ref.No.358d/04358d/05AncillariesIR-AMB Mounting BracketHochiki Corporation246 Tsuruma, Machidia, Tokyo 194-8577, JapanTel: +81 3 3444 4111 • Fax: +81 3 3444 4167E-mail: info@hochiki.co.jp • Website: www.hochiki.co.jpCertificate No: 117k to EN 54-10: 2002 + A1: 2005Certificated ProductsDRD-EConventional Class 1 IR Flame Detector(YBN-R/6SK, YBN-R/6, YBO-R/6R, YBO-R/6RN, YBO-R/6PA, YBO-R/6RS)LPCB Ref.No.117k/01BasesYBN-R/6SKYBN-R/6YBO-R/6RYBO-R/6RNYBO-R/6PAYBO-R/6RSConventional Schottky diode baseConventional standard baseConventional latching relay baseConventional non-latching relay baseConventional 2 wire baseConventional latching relay base with integral Schottky diodeHochiki Europe (UK) LimitedGrosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, United KingdomTel: +44 (0)1634 260133 • Fax: +44 (0)1634 260132Website: www.hochikieurope.comCertificate No: 928k-(cl-7) to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-25: 2008Smoke DetectorsCertificated ProductsLPCB Ref.No.ROD-E Wireless optical smoke detector (RSM-WDB base) 928k/01Notes:1. Meets the requirements of EN 54-5 for Class A1R2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR2032A (3 Vdc) - secondary batteryBases:RSM-WDB - Wireless Adaptor BaseCertificate No: 928j-(cl-7) to EN 54-5: 2000 + A1: 2002 and EN 54-25: 2008Heat DetectorsCertificated ProductsLPCB Ref.No.RHD-E Wireless heat detector (RSM-WDB base) 928j/01Notes:1. Meets the requirements of EN 54-5 for Class A1R18 Jan 2014 225

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated Products2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR2032A (3 Vdc) - secondary batteryLPCB Ref.No.Base:RSM-WDB - Wireless Adaptor BaseAll Enquiries to:Hochiki Europe UK Limited, Grosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, UnitedKingdomTel: +44 (0) 1634 260131 • Fax: +44 (0) 1634 260132Manufacturing at (Certificate Nos 117, 117f, 117g, 117h, 117j)Hochiki Corporation, 141-1 Maehara Ejiri, Kakuda-shi, Miyagi 971-15, JapanTel: +81 3 3444 4111 • Fax: +81 3 3444 4167E-mail: overseas@hochiki.co.jp • Website: www.hochiki.co.jpManufacturing at (Certificate Nos 164, 164g, 164m)Hochiki Europe UK Limited, Grosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, UnitedKingdomTel: +44 (0) 1634 260131 • Fax: +44 (0) 1634 260132E-mail: sales @hochikieurope.com • Website: www.hochikieurope.comManufacturing at (Certificate Nos 358, 358c)Hochiki America Corporation, 7051 Village Drive, Buena Park, California 90621, USATel: +1 714 522 2246 • Fax: +1 714 522 2268E-mail: overseas@hochiki.co.jp • Website: www.hochiki.comCertificate No: 117h to EN 54-7: 2000Certificate No: 164g to EN 54-7: 2000 + A1: 2002Certificate No: 358c to EN 54-7: 2000 + A1: 2002 + A2: 2006Point Smoke Detectors/SensorsCertificated ProductsLPCB Ref.No.SLV-E(J) Conventional photoelectric smoke detector (YBN-R/4C 1 base) 117h/01ALK-E(J)Analogue addressable photoelectric smoke detector117h/02(YBN-R/2NA,YBO-R/SCI,YBO-BS & YBO-BSB bases)Note: Meets the requirements of EN54-7 in low and high sensitivity settings and innormal and low power modesALN-E(HFP)Intelligent Analogue Addressable Optical Smoke Detector117h/03(YBN-R/3(SCI), YBN-R/3, YBO-R/SCI, YBN-R/2NA, YBO-BS & YBO-BSB bases)Note:Meets the requirements of EN54-7 in low and high sensitivity settings and in normal andlow power modesALN-ENIntelligent Analogue Addressable Optical Smoke Detector117h/04(YBN-R/3(SCI), YBN-R/3, YBO-R/SCI, YBN-R/2NA, YBO-BS & YBO-BSB bases)Note:Meets the requirements of EN54-7 in low and high sensitivity settingsALN-EN(WHT)Intelligent Analogue Addressable Optical Smoke Detector117h/04(YBN-R/3(SCI), YBN-R/3, YBO-R/SCI, YBN-R/2NA, YBO-BS & YBO-BSB bases)Note:Meets the requirements of EN54-7 in low and high sensitivity settingsSLR-E-IS Conventional photoelectric smoke detector (YBN-R/4IS base) 164g/02SLK-ENALK-EConventional photoelectric smoke detector (YBF-RL/4H3, YBF-RL/4H5, YBF-RL/4H5Hbases)Intelligent Analogue addressable optical smoke detector(YBN-R/3,YBO-R/SCI,YBO-BS & YBO-BSB bases)Note: Meets the requirements of EN54-7 in low and high sensitivity settings and164g/03358c/03226 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsALK-E (WHT)ALK-E(HFP)ALK-EMALG-ENALG-EN (BLK)ALG-EN (WHT)ALG-ENMSLV-E3SLV-E3 (WHT)SLV-E3(HFP)SLR-E3NSLR-E3N(BLK)SLR-E3N(WHT)in normal and low power modesIntelligent Analogue addressable optical smoke detector (White)(YBN-R/3,YBO-R/SCI,YBO-BS & YBO-BSB bases)Note: Meets the requirements of EN54-7 in low and high sensitivity settings andin normal and low power modesIntelligent analogue addressable optical smoke detector (White) (YBN-R/3(HFP),YBO/R3SCI(HFP), YBO/BS & YBO-BSB bases)Note: Meets the requirements of EN54-7 in low and high sensitivity settings and innormal and lower power modesIntelligent analogue addressable optical smoke detector (YBN-R/3,YBO-R/SCI,YBO-BS& YBO-BSB bases)Note: Meets the requirements of EN54-7 in low and high sensitivity settings and innormal and low power modesIntelligent Analogue addressable optical smoke detector(YBN-R/3,YBO-R/SCI,YBO-BS & YBO-BSB bases)Note: Meets the requirements of EN54-7 in low and high sensitivity settings andin normal and low power modesIntelligent Analogue addressable optical smoke detector(Black)(YBN-R/3,YBO-R/SCI,YBO-BS & YBO-BSB bases)Note: Meets the requirements of EN54-7 in low and high sensitivity settings andin normal and low power modesIntelligent Analogue addressable optical smoke detector(White)(YBN-R/3,YBO-R/SCI,YBO-BS & YBO-BSB bases)Note: Meets the requirements of EN54-7 in low and high sensitivity settings andin normal and low power modesIntelligent analogue addressable optical smoke detector(YBN-R/3,YBO-R/SCI,YBO-BS & YBO-BSB bases)Note: Meets the requirements of EN54-7 in low and high sensitivity settings and innormal and low power modesConventional optical smoke detector(YBN-R/6,YBN-R/6SK,YBO-R/6R,YBO-R/6RS,YBO-R/6RN & YBO-R/6PAbases)Conventional optical smoke detector(White)(YBN-R/6,YBN-R/6SK,YBO-R/6R,YBO-R/6RS,YBO-R/6RN & YBO-R/6PAbases)Conventional optical smoke detector (White)(YBN-R/6(HFP) bases)Conventional optical smoke detector(YBN-R/6,YBN-R/6SK,YBO-R/6R,YBO-R/6RS,YBO-R/6RN & YBO-R/6PAbases)Conventional optical smoke detector(Black)(YBN-R/6,YBN-R/6SK,YBO-R/6R,YBO-R/6RS,YBO-R/6RN & YBO-R/6PAbases)Conventional optical smoke detector(White)(YBN-R/6,YBN-R/6SK,YBO-R/6R,YBO-R/6RS,YBO-R/6RN & YBO-R/6PAbases)LPCB Ref.No.358c/03358c/03358c/03358c/04358c/04358c/04358c/04358c/05358c/05358c/05358c/06358c/06358c/06BasesYBO-R/SCIYBO-BSYBO-BSBYBO-R/6RYBO-R/6RSYBO-R/6RNYBO-R/6PAYBN-R/3YBN-R/2NAYBN-R/6YBN-R/6SKYBO-BSYBO-BSBYBN-R/3(SCI)YBN-R/3Positive switching short circuit isolator baseSounder baseSounder base with BeaconRelay baseRelay base latching with schottky diodeRelay base non latchingProtector alarms baseStandard baseStandard baseStandard baseStandard base with schottlky diodeSounder baseSounder base with BeaconShort Circuit Isolator BaseAddressable detector base18 Jan 2014 227

PART 1: SECTION 4.1COMMERCIAL DETECTORSAll Enquiries to:Hochiki Europe UK Limited, Grosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, UnitedKingdomTel: +44 (0)1634 260131 • Fax: +44 (0)1634 260132Manufacturing at (Certificate Nos. 117, 117f, 117g, 117h, 117j)Hochiki Corporation, 141-1 Maehara Ejiri, Kakuda-shi, Miyagi 971-15, JapanTel: +81 3 3444 4111 • Fax: +81 3 3444 4167E-mail: overseas@hochiki.co.jp • Website: www.hochiki.co.jpManufacturing at (Certificate Nos. 164, 164g, 164m)Hochiki Europe (UK) Limited, Grosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, UnitedKingdomTel: +44 (01634 260131 • Fax: +44 (0)1634 260132E-mail: sales@hochikieurope.com • Website: www.hochikieurope.comManufacturing at (Certificate Nos. 358, 358c)Hochiki America Corporation, 7051 Village Drive, Buena Park, California 90621, USATel: +1 714 522 2246 • Fax: +1 714 522 2268E-mail: overseas@hochiki.co.jp • Website: www.hochiki.comCertificate No: 117g to EN 54 Part 5: 2000Point Heat Detectors/SensorsCertificated ProductsLPCB Ref.No.DCD-1E-ISClass A1 conventional intrinsically safe fixed temperature and rate of rise heat detector 117g/01(YBN-R/4IS 1 base)DFJ-AE3Class A1S conventional fixed temperature heat detector117g/02(YCA-RL/3H2M 1 , YBN-R6 SK 1 , YBN-R/6 1 YBO-R/6R, YBO-R/6RS, YBO-R/6RN andYBO-R/6PA bases)DFJ-AE3 (HFP) Class A1S conventional fixed temperature heat detector (YBN-R/6(HFP) base) 117g/02DFJ-CE3Class CS conventional fixed temperature heat detector117g/03(YCA-RL/3H2M 1 , YBN-R6 SK 1 , YBN-R/6 1 YBO-R/6R, YBO-R/6RS, YBO-R/6RN andYBO-R/6PA bases)DFJ-CE3 (HFP) Class CS conventional fixed temperature heat detector (YBN-R/6(HFP)base) 117g/03DCD-AE3Class A1R conventional rate of rise temperature heat detector117g/04(YCA-RL/3H2M 1 , YBN-R6 SK 1 , YBN-R/6 1 YBO-R/6R, YBO-R/6RS, YBO-R/6RN andYBO-R/6PA bases)DCD-AE3 (HFP) Class A1R conventional rate of rise temperature heat detector (YBN-R/6 (HFP)base) 117g/04DCD-AE3MConventional Class A1R rate of rise temperature heat detector117g/04(YBN-R/6M base)DFG-60BLKJ Class A2 conventional fixed temperature water resistant heat detector 117g/05DCD-CE3CDX Class CR conventional rate of rise high temperature heat detector117g/06(YCA-RL/3H2M 1 , YBN-R6 SK 1 , YBN-R/6 1 YBO-R/6R, YBO-R/6RS, YBO-R/6RN andYBO-R/6PA bases)DCD-CE3(HFP) Class CR conventional rate of rise high temperature heat detector (YBN-R/6(HFP)base) 117g/06DCD-CE3MConventional Class CR rate of rise high temperature heat detector117g/06(YBN-R/6M base)ACB-EIntelligent Analogue addressable Class P heat detector117g/09(YBN-R/3 1 and YBO-R/SCI 1 bases)Note:Meets requirements of EN 54-5:2000 for classes A1R, A1S, BR, BS, CR and CS whenused with ACB-E protocol and classes A1S, BS and CS when used with ATG-E protocol.ACB-E (HFP)Intelligent analogue addressable Class P heat detector (YBN-R/3(HFP) and YBO- 117g/09R/SCI(HFP) bases).Meets requirements of EN 54-5:2000 for classes A1R, A1S, BR, BS, CR and CS whenused with ACB-E protocol and classes A1S, BS and CS when used with ATG-E protocol.ACB-EW Weather proof Intelligent Analogue addressable Class P heat detector 117g/10Note:Meets requirements of EN 54-5:2000 for classes A1R, A1S, BR, BS, CR and CS when228 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsATJ-EATJ-E(HFP)ATJ-E(WHT)ATJ-ENATJ-EN(WHT)used with ACB-E protocol and classes A1S, BS and CS when used with ATG-E protocol.Intelligent Analogue addressable Class P heat detector(YBN-R/3 1 , YBN-R/3(SCI) 1 ,YBO-R/SCI 1 , YBO-BS 1 and YBO-BSB 1 bases)Note:Meets requirements of EN 54-5:2000 for classes A1R, BR and CR.Intelligent Analogue addressable Class P heat detector(YBN-R/3 1 , YBN-R/3(SCI) 1 , YBO-R/SCI 1 , YBO-BS 1 and YBO-BSB 1 bases)Note:Meets requirements of EN 54-5:2000 for classesA1R, BR, CR, A1S, BS and CS.Intelligent Analogue addressable Class P heat detector(YBN-R/3 1 , YBN-R/3(SCI) 1 ,YBO-R/SCI 1 , YBO-BS 1 and YBO-BSB 1 bases)Note:Meets requirements of EN 54-5:2000 for classes A1R, BR, CR, A1S, BS and CS.Intelligent Analogue addressable Class P heat detector(YBN-R/3 1 , YBO-R/SCI 1 , YBO-BS 1 and YBO-BSB 1 bases)Note:Meets requirements of EN 54-5:2000 for classes A1R, BR CR, A1S, BS and CS.Intelligent Analogue addressable Class P heat detector(YBN-R/3 1 , YBO-R/SCI 1 , YBO-BS 1 and YBO-BSB 1 bases)Note:Meets requirements of EN 54-5:2000 for classes A1R, BR, CR, A1S, BS and CS.LPCB Ref.No.117g/13117g/13117g/13117g/14117g/14Bases:YBN-R/4ISYCA-RL/3H2MYBN-R/6SKYBN-R/6YBN-R/3YBO-R/SCIYBO-RSCI/NSYBF-RL/4H3HYBF-RL/4H5HYBN-R/6MYBO-BSBYBO-BSYBO-R/6PAYBO-R/6RYBO-R/6RSYBO-R/6RNYBN-R/3(SCI)Conventional Intrinsically Safe Mounting baseAddressable baseSchottky diode baseStandard baseStandard basePositive Switching Short circuit isolating baseNegative Switching Short circuit isolating base2 wire common mounting base2 wire common mounting baseStandard BaseBase sounder beaconBase sounderProtector alarms baseRelay baseRelay latching base with Schottky diodeRelay base non-latchingShort circuit Isolating baseAll Enquiries to:Hochiki Europe UK Limited, Grosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, UnitedKingdomTel: +44 (0)1634 260131 • Fax: +44 (0)1634 260132Manufacturing at (Certificate Nos. 117, 117f, 117g, 117h, 117j)Hochiki Corporation, 141-1 Maehara Ejiri, Kakuda-shi, Miyagi 971-15, JapanTel: +81 3 3444 4111 • Fax: +81 3 3444 4167Certificate No: 117f to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 and CEA 4021: 1999Certificate No: 928m-(cl-7) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-25: 2008 and CEA 4021: 2003Multi-criteria DetectorsCertificated ProductsLPCB Ref.No.ACA-E Intelligent Analogue addressable multisensor (YBN-R/3 base) 117f/01Note:Meets EN 54-5 class A1 and B and EN 54: Part 7 at 3.0%/m sensitivity setting in normaland low power mode.ACA-E (HFP) Intelligent analogue addressable multisensor (YBN-R/3(HFP) base) 117f/01Note:Meets EN 54-5 class A1 and B and EN 54: Part 7 at 3.0%/m sensitivity setting in normal18 Jan 2014 229

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLPCB Ref.No.and low power mode.ACC-EIntelligent Analogue addressable multi-criteria detector117f/02(YBN-R/31, YBO-R/SCI1, YBO-BS1, YBO-BSB1 and YBN-R/3(SCI) bases)Note:Certificated at the following modes:Mode 0 - Thermally enhanced smoke detector at 2% and 4.5% sensitivityMode 1 - Optical smoke detector at 2% and 4.5% sensitivityMode 2 - Fixed temperature heat detector at class A1 & CACC-E(HFP)Intelligent Analogue addressable multi-criteria detector117f/02(YBN-R/3(HFP), YBO-R/SCI, YBO-BS and YBO-BSB bases)Note:Certificated at the following modes:Mode 0 - Thermally enhanced smoke detector at 2% and 4.5% sensitivityMode 1 - Optical smoke detector at 2% and 4.5% sensitivityMode 2 - Fixed temperature heat detector at class A1 & CACC-E(WHT)Intelligent Analogue addressable multi-criteria detector117f/02(YBN-R/31, YBO-R/SCI1, YBO-BS1, YBO-BSB1 and YBN-R/3(SCI) bases)Note:Certificated at the following modes:Mode 0 - Thermally enhanced smoke detector at 2% and 4.5% sensitivityMode 1 - Optical smoke detector at 2% and 4.5% sensitivityMode 2 - Fixed temperature heat detector at class A1 & CACC-ENIntelligent Analogue addressable multi-criteria detector117f/03(YBN-R/3, YBO-R/SCI, YBO-BS, YBO-BSB and YBN-R/3(SCI) bases)Note: Certificated at the following modes:Mode 0 - Thermally enhanced smoke detector at 2% and 4.5% sensitivityMode 1 - Optical smoke detector at 2% and 4.5% sensitivityMode 2 - Fixed temperature heat detector at class A1 & CACC-EN(WHT)Intelligent Analogue addressable multi-criteria detector117f/03(YBN-R/3, YBO-R/SCI, YBO-BS, YBO-BSB and YBN-R/3(SCI) bases)Note:Certificated at the following modes:Mode 0 - Thermally enhanced smoke detector at 2% and 4.5% sensitivityMode 1 - Optical smoke detector at 2% and 4.5% sensitivityMode 2 - Fixed temperature heat detector at class A1 & CRMD-E Wireless multi-criteria detector (RSM-WDB base) 928m/01Notes:1. Meets the requirements of EN 54-5 for Class A12. Meets the requirements of EN 54-7 in the normal sensitivity setting3. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR2032A (3 Vdc) - secondary batteryBases:YBN-R/3 baseYBN-R/3 Standard baseYBN-R/2NA baseYBO-R/SCI Positive switching short circuit isolator baseYBN-R/4IS intrinsically safe mounting base 1YCA-RL/3H2 addressable baseYCA-RL/5H2 master addressable baseAMU-B2 addressable baseAMU-MB master addressable baseYBC-RL/4H5 baseYBF-RL/3J slave baseYBF-RL/4H5 base 1YBK-RL/4H1A base 1YBK-RL/4H2 base 1YCA-RL/3H2M addressable baseYBN-R/6SK Schottky diode baseYBN-R/6 Standard baseYBN-R/4 base 1YBN-R/6M Standard baseYBO-BS Sounder baseYBO-BSB Sounder base with BeaconYBO-R/5 base 1YBN-R/4M base 1YBO-R/5M base 1YBO-R/6R Relay baseYBO-R/6RS Relay base latching with schottky diodeYBO-R/6RN Relay base non latchingYBO-R/6PA Protector alarms baseYBO-RSCI/NS Negative Switching Short circuit isolating base230 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSYBF-RL/4H3H 2 wire mounting baseYBF-RL/4H5H 2 wire mounting baseRSM-WDB - Wireless Adaptor BaseYBN-R/3(SCI) Short circuit isolator base1 Bases manufactured by Hochiki Europe. All other bases manufactured by Hochiki Corporation.LP denotes detector/base combination is approved in low power mode also.All Enquiries to:Hochiki Europe UK Limited, Grosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, UnitedKingdomTel: +44 (0)1634 260131 • Fax: +44 (0)1634 260132Manufacturing at (Certificate Nos. 117, 117f, 117g, 117h, 117j)Hochiki Corporation, 141-1 Maehara Ejiri, Kakuda-shi, Miyagi 971-15, JapanTel: +81 3 3444 4111 • Fax: +81 3 3444 4167Certificate No: 117j to EN 54-12: 2002Beam DetectorsCertificated ProductsLPCB Ref.No.SRA-ET Optical Beam Smoke Detector 117j/01Note:1) Certified at sensitivity settings 30% obscurationSRA-ET (HFP) Optical Beam Smoke Detector 117j/01Note:1) Certified at sensitivity settings 30% obscurationSPC-E Conventional 4 wire optical beam smoke detector 117j/02Notes:1) Approved at sensitivity setting 25% and 50%SPC-ET Conventional 2 wire optical beam smoke detector 117j/03Notes:1) Approved at sensitivity setting 25% and 50%2) Approved for use with SPC-ET2WI interface kitSPC-ET(HFP) Conventional 2 wire optical bem smoke detector. 117j/03Notes:1) Approved at sensitivity setting 25% and 50%2) Approved for use with SPC-ET2WI interface kitAll Enquiries to:Hochiki Europe UK Limited, Grosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, UnitedKingdomTel: +44 (0) 1634 260131 • Fax: +44 (0) 1634 260132Manufacturing at (Certificate Nos 164, 164g, 164m)Hochiki Europe UK Limited, Grosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, UnitedKingdomTel: +44 (0) 1634 260131 • Fax: +44 (0) 1634 260132E-mail: sales@hochikieurope.com • Website: www.hochikieurope.comCertificate No: 164m to EN54-10:2002Flame DetectorsCertificated ProductsLPCB Ref.No.IFD-E Conventional IR 3 Flame detector 164m/01Note: Meets EN 54-10: 2002 at Class 1 only18 Jan 2014 231

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLPCB Ref.No.IFD-E(IS) Conventional IR 3 Intrinsically Safe Flame Detector 164m/02Note: Meets EN 54-10: 2002 at Class 1 onlyIFD-E(EXD) Conventional IR 3 (Exd) Flameproof Flame Detector 164m/03Note: Meets EN 54-10: 2002 at Class 1 onlyHoneywell Automation (I) Pvt. Ltd53, 54, 55 Hadapasar Indl. Estate, Hadapsar, Pune-411013, IndiaTel: +91 020 66780200 • Fax: +91 020 66780172E-mail: rahul.dwivedi@honeywell.com • Website: www.honeywell.comCertificate No: 550b to EN54-5: 2000 + A1: 2002, EN54-7: 2000 + A1: 2002 + A2: 2006 and CEA 4021: 2003Certificate No: 550e to EN54-5: 2000 + A1: 2002, EN54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005 and CEA 4021: 2003Multi-criteria DetectorsCertificated ProductsTC840MES-yyTC840MEIS-yyAnalogue addressable photo-thermal multi-criteria detector (B501AP, B501, B524IEFT-1,B524HTR and B524RTE bases)Notes:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White2) Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1RAnalogue addressable photo-thermal multi-criteria smoke detector with short circuitisolator (B501AP, B524HTR and B524RTE bases)Notes:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White2) Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1RLPCB Ref.No.550b/05550e/02Bases:1450614-007 Standard analogue detector baseB501 standard analogue detector baseB501AP intelligent detector baseB524IEFT-1 analogue short circuit isolator baseB524HTR heater baseB524RTE latching relay baseCertificate No: 550c to EN54-5: 2000 + A1: 2002Certificate No: 550f to EN54-5: 2000 + A1: 2002 and EN 54-17: 2005Point Heat DetectorsCertificated ProductsTC808ES1028-yyAnalogue addressable class A1R rate of rise heat detector (B501AP, B501, B524IEFT-1,B524HTR and B524RTE bases)Note:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates WhiteTC808ES1002-yy Analogue addressable class A1S fixed temperature heat detector (B501AP, B501,B524IEFT-1, B524HTR and B524RTE bases)Note:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates WhiteTC808EIS1028-yyAnalogue addressable class A1R rate of rise heat detector with short circuit isolator(B501AP, B524HTR and B524RTE bases)Note:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates WhiteTC808EIS1002-yyAnalogue addressable class A1S fixed temperature heat detector with short circuitisolator (B501AP, B524HTR and B524RTE bases)Note:LPCB Ref.No.550c/06550c/07550f/01550f/02232 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated Products1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates WhiteLPCB Ref.No.Bases:14506414-007 Standard analogue detector baseB501 standard analogue detector baseB501AP intelligent detector baseB524IEFT-1 analogue short circuit isolator baseB524HTR heater baseB524RTE latching relay baseCertificate No: 550a to EN54-7: 2000 + A1: 2002 + A2: 2006Certificate No: 550d to EN54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-17: 2005Point Smoke DetectorsCertificated ProductsTC806ES1012-yyTC806EIS1012-yyAnalogue addressable optical smoke detector(B501AP, B501, B524IEFT-1, B524HTR and B524RTE bases)Notes:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White2) Meets the requirements of EN 54-7: 2000 at high and low sensitivityAnalogue addressable optical smoke detector with short circuit isolator(B501AP, B524HTR and B524RTE bases)Notes:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White2) Meets the requirements of EN 54-7: 2000 at high and low sensitivityLPCB Ref.No.550a/04550d/01Bases:14506414-007 standard analogue detector baseB501 standard analogue detector baseB501AP intelligent detector baseB524IEFT-1 analogue short circuit isolator baseB524HTR heater baseB524RTE latching relay baseHoneywell Control Systems LimitedHoneywell House, Arlington Business Park, Bracknell, Berkshire RG12 1EB, United KingdomTel: +44 (0)1344 655609 • Fax: +44 (0)1344 655474Website: www.honeywell.comCertificate No: 199p-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-5: 2000 + A1: 2002 and CEA 4021: 2003Certificate No: 199aa-(cl-1) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002, CEA 4021: 2003 & EN 54-17: 2005Certificate No: 199aa to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002, CEA 4021: 2003 & EN 54-17: 2005Certificate No: 199t-(cl-1) to LPS 1279 - 1.0: 2006, EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021:2003Multi-criteria DetectorsCertificated ProductsTC840MFEISTC840MEISAnalogue addressable photo-thermal-IR multi-criteria smoke sensorwith short circuit isolator (B501AP, B524HTR & B524RTE bases)Note: Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000& CEA 4021: 2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1RAnalogue addressable photo-thermal multi-criteria smoke sensor with short circuitisolator (B501AP, B524HTR & B524RTE bases)Note: Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000& CEA 4021: 2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1RLPCB Ref.No.199aa/01199aa/02TC840MFES Analogue addressable photo-thermal-IR multi-criteria sensor 199p/0618 Jan 2014 233

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsTC840MESTC850E1009-yy(B501AP, B501, B524IEFT-1, B524HTR & B524RTE bases)Note: Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000& CEA 4021: 2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1RAnalogue addressable photo-thermal multi-criteria sensor(B501AP, B501, B524IEFT-1, B524HTR & B524RTE bases)Note: Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000& CEA 4021: 2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1RAnalogue addressable multi-criteria fire detector incorporating CO, photoelectric, thermaland IR sensors (B501, B501DG and B524IEFT-1 bases)Notes:1.) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White2.) Certified at the following settings: -Normal Mode:Alarm Levels 1 to 5 (Multi-criteria): EN54-5 Class A1R, EN54-7,LPS1279 and CEA 4021Alarm Level 6 (Heat Only Mode): EN54-5 Class A1RNuisance Environment Applications:Application 0,Alarm Level 4 LPS1279 & CEA 4021Application 1,Alarm Level 5EN54-5 Class A1R, EN54-7& CEA 4021Application 2,Alarm Level 4 or 5 EN54-5 Class A1R, EN54-7& CEA 4021Application 3,Alarm Level 5 EN54-5 Class A1R, EN54-7& CEA 4021Application 4,Alarm Level 5 EN54-5 Class A1R, EN54-7& CEA 4021Application 5,Alarm Level 5 EN54-7 & CEA 4021Application 6,Alarm Level 5 EN54-5 Class A1R, EN54-7& CEA 4021Application 7,Alarm Level 5 EN54-5 Class A1R, LPS1279& CEA 4021LPCB Ref.No.199p/07199t/01Bases:B501B501APB524IEFT-1B524HTRB524RTEstandard analogue detector baseintelligent detector baseanalogue short circuit isolator baseheater baselatching relay baseCertificate No: 199w to EN 54-12: 2002 & EN 54-17: 2005Beam DetectorsCertificated ProductsLPCB Ref.No.TC847A1004EURIS Analogue optical beam detector with self test facility and short circuit isolator feature 199w/02Note:1. Meets the requirements of BS EN54-12: 2002 at sensitivity levels 1, 2, 3, 4 andAcclimate levels 1 & 2Ancillaries:RTS151-KEYRemote test Station6500 - LRK/BEAMLRK Long Range Kit6500 - MMK/BEAMMMK Multi-Mounting Kit6500 - SMK/BEAMSMK Surface Mounting KitCertificate No: 199n to EN 54-5: 2000 + A1: 2002Certificate No: 199n-(cl-1) to EN 54-5: 2000 + A1: 2002Certificate No: 199ac-(cl-1) to EN 54-5: 2000 + A1: 2002 & EN 54-17: 2005Certificate No: 199ac to EN 54-5: 2000 + A1: 2002 & EN 54-17: 2005234 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSPoint Heat DetectorsCertificated ProductsTC808EIS1002TC808EIS1051TC808EIS1028TC808ES1028TC808ES1051TC808ES1002Analogue addressable class A1S fixed temperature heat sensor with short circuit isolator(B501AP, B524HTR & B524RTE bases)Analogue addressable class BS fixed temperature heat sensor with short circuit isolator(B501AP, B524HTR & B524RTE bases)Analogue addressable class A1R rate of rise heat sensor with short circuit isolator(B501AP, B524HTR & B524RTE bases)Analogue addressable class A1R rate of rise heat sensor(B501AP, B501, B524IEFT-1, B524HTR & B524RTE bases)Analogue addressable class BS fixed temperature heat sensor(B501AP, B501, B524IEFT-1, B524HTR & B524RTE bases)Analogue addressable class A1S fixed temperature heat sensor(B501AP, B501, B524IEFT-1, B524HTR & B524RTE bases)LPCB Ref.No.199ac/01199ac/02199ac/03199n/15199n/16199n/17Bases:SIGI-IBS Isolator baseSIGA-SB Standard baseSIGA-SB4 Standard base with trim skirtSIGA-RB Relay baseB501 analogue detector baseB501AP intelligent sensor baseB501DG analogue deep baseB524IEFT analogue short circuit isolator baseB524IEFT-1 analogue short circuit isolator baseB524HTR heater baseB524RTE latching relay baseCertificate No: 199m to EN 54-7: 2000 + A1: 2002Certificate No: 118h to EN 54-7: 2000Certificate No: 199m-(cl-1) to EN 54-7: 2000 + A1: 2002Certificate No: 199ab-(cl-1) to EN 54-7: 2000 + A1: 2002 & EN 54-17: 2005Certificate No: 199ab to EN 54-7: 2000 + A1: 2002 & EN 54-17: 2005Point Smoke Detectors/SensorsCertificated ProductsLPCB Ref.No.TC846A1005 Analogue addressable laser optical detector (B501, B501DG & B524IEFT bases) 118h/01Note: meets requirements of EN 54 Part 7 at sensitivity settings of 7 to 9 inclusiveTC806EIS1012Analogue addressable optical smoke sensor with short circuit isolator (B501AP,199ab/01B524HTR & B524RTE bases)Note: Meets the requirements of EN 54-7: 2000 at high and low sensitivityTC842B1007 AEIntrinsically safe analogue addressable photoelectric smoke detector (B501, B501AP 199m/07bases)Note: Meets EN54-7: 2000 at High, Normal & Low sensitivity settingsTC806ES1012Analogue addressable optical smoke sensor (B501AP, B501, B524IEFT-1, B524HTR & 199m/10B524RTE bases)Note: Meets the requirements of EN 54-7: 2000 at high and low sensitivityBases:B501 Analogue detector baseB501DG Analogue deep baseB501AP Intelligent detector baseB524IEFT Analogue short circuit isolator baseB524IEFT-1 Analogue short circuit isolator baseB524HTR Heater BaseB524RTE Latching relay baseSIGI-IBS Isolator baseSIGA-SB Standard BaseSIGA-SB4 Standard base with trim skirtSIGA-RB Relay baseSIGA-RB4 Relay base with trim skirt18 Jan 2014 235

PART 1: SECTION 4.1COMMERCIAL DETECTORSHoneywell Control Systems LtdHoneywell House, Arlington Business Park, Bracknell, Berkshire RG12 1EB, United KingdomTel: 01344 655609 • Fax: 01344 655474Website: www.honeywell.comCertificate No: 262s-(cl-2) to EN 54-7: 2000 + A1: 2002 + A2: 2006, CEA 4021: 2003Certificate No: 262t-(cl-2) to EN 54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated ProductsXLS-IPHSIIntelligent analogue addressable thermally enhanced photoelectric and ionisation smokedetector(SIGI-IBS, SIGA-SB, SIGA-SB4, SIGA-RB, SIGA-RB4,SIGA-IB, SIGA-IB4 & SIGA-AB4G bases)Notes:1. Meets the requirements of EN 54-7:2000 at sensitivity settings 1.0%/ft, 2%/ft, 2.5%/ft,3%/ft, and 3.5%/ft.2. The SIGA-LED indicator is approved for use with the SIGA-SB and SIGA-SB4 bases.XLS-PHSIIntelligent analogue addressable thermally enhanced photoelectric smoke detector(SIGI-IBS, SIGA-SB, SIGA-SB4, SIGA-RB, SIGA-RB4,SIGA-IB, SIGA-IB4 and SIGA-AB4G bases)Notes:1. Meets the requirements of EN 54-7:2000 at sensitivity settings 1.0%/ft, 2%/ft, 2.5%/ft,3%/ft, and 3.5%/ft.2. The SIGA-LED indicator is approved for use with the SIGA-SB and SIGA-SB4 bases.XLS-ISI Intelligent analogue addressable ionisation smoke detector SIGA-SB, SIGA-SB4,SIGA-RB, SIGA-RB4,SIGA-IB, SIGA-IB4 and SIGA-AB4G bases)Notes:1. Meets the requirements of EN 54-7:2000 at sensitivitysettings 1.0%/ft, 2%/ft, 2.5%/ft, 3%/ft, and 3.5%/ft.2. The SIGA-LED indicator is approved for use withthe SIGA-SB and SIGA-SB4 basesXLS-PSIIntelligent analogue addressable photoelectric smoke detectorSIGA-SB, SIGA-SB4, SIGA-RB, SIGA-RB4,SIGA-IB, SIGA-IB4 and SIGA-AB4G bases)Notes:1. Meets the requirements of EN 54-7:2000 at sensitivitysettings 1.0%/ft, 2%/ft, 2.5%/ft, 3%/ft, and 3.5%/ft.2. The SIGA-LED indicator is approved for use withthe SIGA-SB and SIGA-SB4 basesLPCB Ref.No.262s/01262s/02262t/01262t/02Bases:SIGI-IBSSIGA-SBSIGA-SB4SIGA-RBSIGA-RB4SIGA-IBSIGA-IB4SIGA-AB4GAccessories:SIGA-LEDIsolator baseStandard baseStandard base with trim skirtRelay baseRelay base with trim skirtIsolator BaseIsolator base with 4 inch mounting adaptorsSounder baseIndicatorCertificate No: 262u-(cl-2) to EN 54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsXLS-HRSIIntelligent analogue addressable Class A1 & A2R rate of rise heat detector(SIGI-IBS, SIGA-SB, SIGA-SB4, SIGA-RB, SIGA-RB4,SIGA-IB,SIGA-IB4 and SIGA-AB4G bases)Notes:1. The SIGA-LED indicator is also approved for use withthe SIGA-SB and SIGA-SB4 basesLPCB Ref.No.262u/02236 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSBases:SIGI-IBSSIGA-SBSIGA -SB4SIGA -RBSIGA -RB4SIGA-IBSIGA-IB4SIGA-AB4GIsolator baseStandard baseStandard base with trim skirtRelay baseRelay base with trim skirtIsolator BaseIsolator base with 4 inch mounting adaptorsSounder baseAccessories:SIGA-LED IndicatorHoneywell Life Safety Systems (Novar Systems Ltd)140 Waterside Road, Hamilton Industrial Park, Leicester LE5 1TN, United KingdomTel: +44 (0)116 246 2000 • Fax: +44 (0)116 246 2300E-mail: gent_enquiry@gent.co.uk • Website: www.gent.co.ukCertificate No: 524c-(cl-1) to EN 54-20:2006Aspirating Smoke DetectorsCertificated ProductsLPCB Ref.No.ALL-SPEC ASD 524c/01Notes:1. Approval of the detector is conditional upon the following requirements: For compliance with Clause 5.10 of EN 54-20: 2006, the detector shall besupplied with power from a power supply conforming to the requirements of EN54-4. System design, installation and commissioning shall be performed inaccordance with the manufacturer’s installation guide, associated manuals anddesign software TF-SC-1 HW. The detector shall be installed with sampling pipe conforming to EN 61386-1,to at least Class 1131.2. Approved detector configurations (Class A, Class B and Class C): ALL-SPECx (standard version, no bargraph display, 1 alarm, not available fornetworking) ALL-SPECx-FR (deep freeze version, no bargraph display, 1 alarm, notavailable for networking ) ALL-SPECx-SL (silent version, no bargraph display, 1 alarm, not available fornetworking)X=detector 1 or 23. The approved detector must incorporate one or two of the following detectormodules: ASD-TP-001-L (standard version, sensitivity of 0.015%/m) ASD -TP-001-L-F (deep freeze version, sensitivity of 0.015%/m) ASD -TP-01-L (standard version, sensitivity of 0.10%/m) ASD -TP-01-L-F (deep freeze version, sensitivity of 0.10%/m)ASD -TP-05-L (standard version, sensitivity of 0.50%/m)ASD -TP-05-L-F (deep freeze version, sensitivity of 0.50%/m)X=detector 1 or 2HI-SPEC ASD 524c/03Notes:1. Approval of the detector is conditional upon the following requirements:For compliance with Clause 5.10 of EN 54-20: 2006, the detector shall besupplied with power from a power supply conforming to the requirements of EN54-4. System design, installation and commissioning shall be performed inaccordance with the manufacturer’s installation guide, associated manuals anddesign software TF-SC-1 HW. The detector shall be installed with sampling pipe conforming to EN 61386-1,to at least Class 1131.2. Approved detector configurations (Class A, Class B and Class C): HI-SPECx (standard version, bargraph display, 3 alarms, prepared fornetworking) HI-SPECx-FR (deep freeze version, bargraph display, 3 alarms, prepared fornetworking)18 Jan 2014 237

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLPCB Ref.No. HI-SPECx -SL (silent version, bargraph display, 3 alarms, prepared fornetworking)3. The approved detector must incorporate one or two of the following detectormodules: ASD-TT-001-L (standard version, sensitivity of 0.015%/m) ASD -TT-001-L-F (deep freeze version, sensitivity of 0.015%/m) ASD -TT-01-L (standard version, sensitivity of 0.10%/m) ASD -TT-01-L-F (deep freeze version, sensitivity of 0.10%/m) ASD -TT-05-L (standard version, sensitivity of 0.50%/m) ASD -TT-05-L-F (deep freeze version, sensitivity of 0.50%/m)COMPACT ASD 524c/04Notes:1. Approval of the detector is conditional upon the following requirements: For compliance with Clause 5.10 of EN 54-20: 2006, the detector shall besupplied with power from a power supply conforming to the requirements of EN54-4. System design, installation and commissioning shall be performed inaccordance with the manufacturer’s installation guide, associated manuals anddesign software TF-SC-1 HW. The detector shall be installed with sampling pipe conforming to EN 61386-1,to at least Class 1131.2. Approved detector configurations, sensitivity of 0.50%/m (Class A, Class B andClass C): ASD-CM (version with 2 stages of alarm) ASD-CM2 (version with 2 stages of alarm, ROOM IDENT)Horing LIH Industrial Co LtdNo. 17-6, Ai-Chien Road, Hu-Hsi Village, Yuan-Shan Hsiang (264), Ilan Hsien, Taiwan ROCTel: +886 2 22487599 • Fax: +886 2 22407752Certificate No: 506a to EN 54-7: 2000 + A1: 2002 + A2: 2006Point Smoke DetectorsCertificated ProductsLPCB Ref.No.AHS-871 Conventional photoelectric smoke detector (AHMB-L mounting base) 506a/01AH-0311-2 (2 wire) Conventional photoelectric smoke detector (AHMB-031 Base) 506a/02AH-0311-3 (3 wire) Conventional photoelectric smoke detector (AHMB-031 Base) 506a/03AH-0311-4 (4 wire) Conventional photoelectric smoke detector (AHMB-031 Base) 506a/04Q01-2 Conventional 2-wire optical smoke detector(AHMB-061-2 and AHMB-071-2 bases )Q01-3 Conventional 3-wire optical smoke detector with remote(AHMB-061-3 and AHMB-071-3 bases )Q01-4 Conventional 4-wire optical smoke detector with relay output(AHMB-061-4 and AHMB-071-4 bases)Bases:AHMB-031 mounting baseAHMB-L mounting baseAHMB-061-2 Standard baseAHMB-061-3 Standard baseAHMB-061-4 Standard baseAHMB-071-2 Base UnitAHMB-071-3 Base UnitAHMB-071-4 base Unit506a/05506a/06506a/07Certificate No: 506b to EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-5: 2000 + A1: 2002 and CEA 4021: 2003Multi-criteria DetectorsCertificated ProductsLPCB Ref.No.AH-0315-2 (2 wire) Optical smoke and class A2 heat detector (AHMB-031 Base) 506b/01AH-0315-3 (3 wire) Optical smoke and class A2 heat detector (AHMB-031 Base) 506b/02238 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLPCB Ref.No.AH-0315-4 (4 wire) Optical smoke and class A2 heat detector (AHMB-031 Base) 506b/03Q05-2 Conventional 2-wire optical smoke and class A2 heat detector506b/04(AHMB-061-2 and AHMB-071-2 bases)Q05-3 Conventional 3-wire optical smoke and class A2 heat detector with remote LED (AHMB- 506b/05061-3 and AHMB-071-3 bases)Q05-4 Conventional 4-wire optical smoke and class A2 heat detector with relay output (AHMB-061-4 and AHMB-071-4 bases)506b/06Bases:AHMB-031 mounting baseAHMB-061-2 Standard baseAHMB-061-3 Standard baseAHMB-061-4 Standard baseAHMB-071-2 Base UnitAHMB-071-3 Base UnitAHMB-071-4 base UnitCertificate No: 506c to EN 54-5: 2000 + A1: 2002Point Heat DetectorCertificated ProductsAH-0316-2 (2 wire) Conventional Class A2 rate of rise and fixed temperature heat detector (AHMB-031 Base)AH-0316-3 (3 wire) Conventional three wire rate of rise and fixed temperature heat detector (AHMB-031 Base)AH-0316-4 (4 wire) Conventional four wire rate of rise and fixed temperature heat detector (AHMB-031 Base)Q06-2 Conventional 2-wire Class A2 heat detector(AHMB-061-2 and AHMB-071-2 bases)Q06-3 Conventional 3-wire Class A2 heat detector with remote LED(AHMB-061-3 and AHMB-071-3 bases)Q06-4 Conventional 4-wire Class A2 heat detector with relay output(AHMB-061-4 and AHMB-071-4 bases)LPCB Ref.No.506c/01506c/02506c/03506c/04506c/05506c/06Bases:AHMB-031 mounting baseAHMB-061-2 Standard baseAHMB-061-3 Standard baseAHMB-061-4 Standard baseAHMB-071-2 Base UnitAHMB-071-3 Base UnitAHMB-071-4 base UnitCertificate No: 506f to EN 14604: 2005Smoke DetectorsCertificated ProductsLPCB Ref.No.NQ9S Single Station Smoke Detector 506f/01INIM Electronics s.r.l.Via Fosso Antico - Loc, Centobuchi, 63033 Monteprandone (AP), ItalyTel: +39 0735 705007 • Fax: +39 0735 704912E-mail: enea.galiffa@inim.biz • Website: www.inim.bizCertificate No: 991d to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-17: 2005Certificate No: 991c to EN 54-7: 2000 + A1:2002 + A2:200618 Jan 2014 239

PART 1: SECTION 4.1COMMERCIAL DETECTORSSmoke DetectorsCertificated ProductsID100ED100Conventional optical smoke detector(EB0010 and EB0020 bases).Note:1) Meets EN 54-7:2000 with low, medium-low, medium-high and high sensitivities.Intelligent analogue addressable optical smoke detector with short circuit isolator(EB0010 and EB0020 bases).Note:1) Meets EN 54-7:2000 with low, medium-low, medium-high and high sensitivities.LPCB Ref.No.991c/01991d/01Bases:EB0010EB0020Standard baseRelay baseCertificate No: 991f to EN 54-5: 2000 + A1: 2002 and EN 54-17: 2005Certificate No: 991e to EN 54-5: 2000 + A1:2002Heat DetectorsCertificated ProductsID200ED200Conventional class P heat detector(EB0010 and EB0020 bases).Note:1) Meets the requirements of EN54-5:2000 at class A1R & class B.Intelligent analogue addressable class P heat detector with short circuit isolator (EB0010and EB0020 bases).Note:1) Meets the requirements of EN54-5:2000 at class A1R & class B.LPCB Ref.No.991e/01991f/01Bases:EB0010EB0020Standard baseRelay baseCertificate No: 991b to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, CEA4021: 2003 and EN 54-17: 2005Certificate No: 991a to EN 54-5: 2000 + A1:2002, EN 54-7: 2000 + A1:2002 + A2:2006 and CEA4021: 2003Multi-Criteria DetectorsCertificated ProductsLPCB Ref.No.ID300 Conventional multi-criteria detector (EB0010 and EB0020 bases). 991a/01Note:1) Meets EN 54-7:2000 with low, medium-low, medium-high and high sensitivities.2) Meets the requirements of EN 54-5:2000 at class A1R & class B.ED300Intelligent analogue addressable multi-criteria detector with short circuit isolator (EB0010and EB0020 bases).Note:1) Meets EN 54-7:2000 with low, medium-low, medium-high and high sensitivities.2) Meets the requirements of EN 54-5:2000 at class A1R & class B.991b/01Bases:EB0010EB0020Standard baseRelay baseIntelligent Safety & Security Technology Ltd.6-7 Ludgate Square,, London EC4M 7AS, United KingdomTel: +44 845 116 2945E-mail: info@isst-uk.com • Website: www.isst-uk.comCertificate No: 512a-(cl-6) to EN54-7: 2000 + A1: 2002 + A2: 2006240 18 Jan 2014

Smoke DetectorsCertificated ProductsPART 1: SECTION 4.1COMMERCIAL DETECTORSLPCB Ref.No.CS-01 Conventional 2 wire photoelectric smoke detector with remote LED output (CB-D2 base) 512a/02Base:CB-D2 4-wire detector baseCertificate No: 512b-(cl-3) to EN54-5: 2000 + A1: 2002, EN54-7: 2000 + A1: 2002 + A2: 2006 & CEA4021: 2003Multi-Sensor/Multi-Criteria DetectorsCertificated ProductsCSH-01Conventional 2 wire photoelectric smoke and heat detector with remote LED output (CB-D2 base)LPCB Ref.No.512b/02Base:CB-D2 4-wire detector baseCertificate No: 512d-(cl-6) to EN54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsCH-01Conventional 2 wire 24VDC class A2R fixed temperature and rate-of-rise heat detectorwith LED output (CB-D2 base)LPCB Ref.No.512d/04Base:CB-D2 4-wire detector baseKidde Products LtdThame Park Road, Thame, Oxfordshire OX9 3RT, United KingdomTel: +44 (0)1844 265003 • Fax: +44 (0)1844 265156E-mail: general.enquiries@kiddeuk.co.uk • Website: www.kfp.co.ukCertificate No: 404c to EN54-20: 2006Aspirating Smoke DetectorsCertificated ProductsLPCB Ref.No.Senator 25 High sensitivity aspirating smoke detector 404c/01Notes:1) For compliance with Clause 5.10 of EN54-20:2006, the detector shall besupplied with power from a power supply complying with EN54-4.2) The approval of the detector is conditional upon the following requirements:- Design, installation and commissioning are performed in accordance with thesystem design manual and instructions.- The device is approved for sensitivity Classes A, B and C for sensitivities upto 0.31%/m. The Class of any pipe/hole configuration and detector sensitivitymust be determined using PipeCAD.Senator 100 High sensitivity aspirating smoke detector 404c/02Notes:1) For compliance with Clause 5.10 of EN54-20:2006, the detector shall besupplied with power from a power supply complying with EN54-4.2) The approval of the detector is conditional upon the following requirements:- Design, installation and commissioning are performed in accordance with thesystem design manual and instructions.- The device is approved for sensitivity Classes A, B and C for sensitivities upto 0.62%/m. The Class of any pipe/hole configuration and detector sensitivitymust be determined using PipeCAD.Senator 200High sensitivity aspirating smoke standard detector (Senator 200 Stand Alone CommandModule Ancillary)404c/0318 Jan 2014 241

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLPCB Ref.No.Notes:1) For compliance with Clause 5.10 of EN54-20:2006, the detector shall besupplied with power from a power supply complying with EN54-4.2) The approval of the detector is conditional upon the following requirements:- Design, installation and commissioning are performed in accordance with thesystem design manual and instructions.- The device is approved for sensitivity Classes A, B and C for sensitivities upto 0.62%/m, 1.95%/m and 4.65%/m respectively. The Class of any pipe/holeconfiguration and detector sensitivity must be determined using PipeCAD.Senator 200 High sensitivity aspirating smoke command module detector 404c/04Notes:1) For compliance with Clause 5.10 of EN54-20:2006, the detector shall besupplied with power from a power supply complying with EN54-4.2) The approval of the detector is conditional upon the following requirements:- Design, installation and commissioning are performed in accordance with thesystem design manual and instructions.- The device is approved for sensitivity Classes A, B and C for sensitivities upto 0.62%/m, 1.95%/m and 4.65%/m respectively. The Class of any pipe/holeconfiguration and detector sensitivity must be determined using PipeCAD.Senator 200High sensitivity aspirating minimum display version smoke detector (Senator 200 Stand 404c/05Alone Command Module Ancillary)Notes:1) For compliance with Clause 5.10 of EN54-20:2006, the detector shall besupplied with power from a power supply complying with EN54-4.2) The approval of the detector is conditional upon the following requirements:- Design, installation and commissioning are performed in accordance with thesystem design manual and instructions.- The device is approved for sensitivity Classes A, B and C for sensitivities upto 0.62%/m, 1.95%/m and 4.65%/m respectively. The Class of any pipe/holeconfiguration and detector sensitivity must be determined using PipeCAD.Ancillaries:Senator 200 Stand Alone Command ModuleKidde Products Ltd, trading as AirSense TechnologyUnit 2, Dawdon Business Park, Blair Way, Seaham, Country Durham SR7 7PP, United KingdomTel: +44(0)191-513 6100 • Fax: +44(0)191-513 6102E-mail: general.enquiries@kiddeuk.co.uk • Website: www.kfp.co.ukCertificate No: 404c to EN 54-20: 2006Certificated ProductsSenator NanoHigh sensitivity aspirating smoke detectorNotes:1. For compliance with Clause 5.10 of EN54-20:2006, the detector shall be suppliedwith power from a power supply complying with EN 54-4.2. The approval of the detector is conditional upon the following requirements:Design, installation and commissioning are performed in accordance with the systemdesign manual and instructions.3. The device is approved for sensitivity Classes A, B and C for sensitivities up to0.80%/m, 1.66%/m and 7.54%/m respectively.The Class of any pipe/hole configuration and detector sensitivity must be determinedusing PipeCAD.LPCB Ref.No.404c/06Certificate No: 404c to EN54-20: 2006Certificated ProductsLPCB Ref.No.Stratos Micra 25 High sensitivity aspirating smoke detector 404c/01Notes:1) For compliance with Clause 5.10 of EN54-20:2006, the detector shall besupplied with power from a power supply complying with EN54-4.2) The approval of the detector is conditional upon the following requirements:- Design, installation and commissioning are performed in accordance with the242 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLPCB Ref.No.system design manual and instructions.3) The device is approved for sensitivity Classes A, B and C for sensitivities up to0.31%/m. The Class of any pipe/hole configuration and detector sensitivity must bedetermined using PipeCAD.Stratos Micra 100 High sensitivity aspirating smoke detector 404c/02Notes:1) For compliance with Clause 5.10 of EN54-20:2006, the detector shall besupplied with power from a power supply complying with EN54-4.2) The approval of the detector is conditional upon the following requirements:- Design, installation and commissioning are performed in accordance with thesystem design manual and instructions.3) The device is approved for sensitivity Classes A, B and C for sensitivities up to0.62%/m. The Class of any pipe/hole configuration and detector sensitivity must bedetermined using PipeCAD.Stratos HSSD 2High sensitivity aspirating smoke standard detector (Stratos HSSD 2 Stand Alone 404c/03Command Module Ancillary)Notes:1. For compliance with Clause 5.10 of EN54-20:2006, the detector shall be suppliedwith power from a power supply complying with EN 54-4.2. The approval of the detector is conditional upon the following requirements: Design, installation and commissioning are performed in accordance with thesystem design manual and instructions. The device is approved for sensitivity Classes A, B and C for sensitivities upto 0.62%/m, 1.95%/m and 4.65%/m respectively.. The Class of any pipe/holeconfiguration and detector sensitivity must be determined using PipeCAD.Stratos HSSD 2 High sensitivity aspirating command module smoke detector 404c/04Notes:1. For compliance with Clause 5.10 of EN54-20:2006, the detector shall be suppliedwith power from a power supply complying with EN 54-4.2. The approval of the detector is conditional upon the following requirements: Design, installation and commissioning are performed in accordance with thesystem design manual and instructions. The device is approved for sensitivity Classes A, B and C for sensitivities upto 0.62%/m, 1.95%/m and 4.65%/m respectively.. The Class of any pipe/holeconfiguration and detector sensitivity must be determined using PipeCAD.Stratos HSSD 2 High sensitivity aspirating minimum display version smoke detector (Stratos HSSD 2 404c/05Stand Alone Command Module Ancillary)Notes:1. For compliance with Clause 5.10 of EN54-20:2006, the detector shall be suppliedwith power from a power supply complying with EN 54-4.2. The approval of the detector is conditional upon the following requirements: Design, installation and commissioning are performed in accordance with thesystem design manual and instructions. The device is approved for sensitivity Classes A, B and C for sensitivities upto 0.62%/m, 1.95%/m and 4.65%/m respectively.. The Class of any pipe/holeconfiguration and detector sensitivity must be determined using PipeCAD.Stratos Nano High sensitivity aspirating standard smoke detector 1, 2, 3 404c/06Notes:1. For compliance with Clause 5.10 of EN54-20:2006, the detector shall be suppliedwith power from a power supply complying with EN 54-4.2. The approval of the detector is conditional upon the following requirements: Design, installation and commissioning are performed in accordance with thesystem design manual and instructions. The device is approved for sensitivity Classes A, B and C for sensitivities upto 0.80%/m, 1.66%/m and 7.54%/m respectively. The Class of any pipe/holeconfiguration and detector sensitivity must be determined using PipeCAD.Ancillaries:Stratos HSSD 2 Stand Alone Command Module18 Jan 2014 243

PART 1: SECTION 4.1COMMERCIAL DETECTORSLabor Strauss Sicherungsanlagenbau GmbHWiegelestrasse 36, A-1231 Vienna, AustriaTel: +43 1 52114-44 • Fax: +43 1 52114-27E-mail: andreas.schumacher@lst.at • Website: www.lst.atCertificate No: 928e-(cl-11) to EN 54-7: 2000 + A1: 2002 + A2: 2006Certificate No: 928b-(cl-8) to EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005Smoke DetectorsCertificated ProductsFI750/OFC650/OAnalogue addressable photoelectric smoke detector with short-circuit isolator (F1750/Bbase)Notes:1. Meets the requirements of EN 54-7 at the following sensitivity settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowConventional Photo Detector(FC600/B, FC600/BR and FC600/BRD bases)LPCB Ref.No.928b/02928e/02BasesFC600/BFC600/BRFC600/BRDF1750/BUniversal adaptor baseUniversal adaptor base with resistorUniversal adaptor base with resistor and Schottky diodeLow profile adaptor baseCertificate No: 928a-(cl-8) to EN 54-5: 2000 + A1: 2002, EN 54-17: 2005Point Heat DetectorCertificated ProductsLPCB Ref.No.FI750/T Analogue addressable Class P heat detector with short-circuit isolator (F1750/B base) 928a/02Note:1. Meets the requirements of EN 54-5 for Class A1R, Class B and Class BSBaseFI750/BLow profile adaptor baseCertificate No: 928d-(cl-11) to EN 54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsFC650/TDIFF/57FC650/TMAX/78Conventional Class A1R Thermal Detector(FC600/B, FC600/BR and FC600/BRD bases)Conventional Class B Thermal Detector(FC600/B, FC600/BR and FC600/BRD bases)LPCB Ref.No.928d/02928d/02BasesFC600/BFC600/BRFC600/BRDUniversal adaptor baseUniversal adaptor base with resistorUniversal adaptor base with resistor and Schottky diodeCertificate No: 928c-(cl-8) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005, CEA 4021: 2003Multi-Sensor/Multi-Criteria DetectorsCertificated ProductsLPCB Ref.No.FI750/OT Addressable multi-criteria detector with short-circuit isolator (F1750/B base) 928c/02Notes:244 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated Products1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the followingsettings:Multi Criteria Level 1 (most sensitive) - Thermally enhanced smokedetection with Class A1 heat responseMulti Criteria Level 2 - Thermally enhanced smoke detection with ClassA1 heat responseMulti Criteria Level 3 - Thermally enhanced smoke detection with ClassA1 heat responseMulti Criteria Level 4 (least sensitive) - Thermally enhanced smokedetection with Class A1 heat response2. Meets the requirements of EN 54-5 (Class A1R) at the following settings:Class A1R heat only response3. Meets the requirements of EN 54-7 at the following sensitivity settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowLPCB Ref.No.BaseFI750/BLow profile adaptor baseLichfield Fire & Safety Equipment Co. Ltd (LIFECO)Unit 8, Calibre Industrial Park, Laches Close, Four Ashes, Wolverhampton WV10 7DZ, United KingdomTel: +44 (0) 1902 798 706 • Fax: +44 (0) 1902 798 679E-mail: info@lifeco-uk.com • Website: www.lifeco-uk.comCertificate No: 506a-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006Photoelectric Smoke DetectorsCertificated ProductsLPCB Ref.No.LF-PE-4100 LF-PE-4100 Conventional photoelectric smoke detector (AHMB-L base) 506a/01Bases:AHMB-L mounting baseCertificate No: 506c-(cl-1) to EN 54-5: 2000 + A1: 2002Point Heat DetectorsCertificated ProductsLFHD60 (2 wire) Conventional Class A2 rate of rise and fixed temperature heat detector (AHMB-031 base)LPCB Ref.No.506c/01Bases:AHMB-031 mounting baseMavili Elektronik Ticaret Ve Sanayi A.S.Bostanci Dudullu Yolu, Kutup Sok, No. 29 Y Dudullu - Umraniye, Istanbul TR 34775, TurkeyTel: +90 216 4664 505 • Fax: +90 216 4664 510E-mail: mavili@mavili.com.tr • Website: www.mavigard.comCertificate No: 926a to EN 54-7: 2000 + A1: 2002 + A2: 2006Point Smoke DetectorsCertificated ProductsLPCB Ref.No.MG-9100 Intelligent analogue addressable system photoelectric smoke detector (MG-3510 base) 926a/01Bases:18 Jan 2014 245

PART 1: SECTION 4.1COMMERCIAL DETECTORSMG-3510 standard mounting baseCertificate No: 926b to EN 54-5: 2000 + A1: 2002Point Heat DetectorsCertificated ProductsMG-9300Intelligent analogue addressable system class A1R rate of rise heat detector (MG-3510base)LPCB Ref.No.926b/01Bases:MG-3510 standard mounting baseCertificate No: 926c to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003Multi-criteria DetectorsCertificated ProductsLPCB Ref.No.MG-9400 Intelligent analogue addressable system class A1R multisensor detector (MG-3510 base) 926c/01Bases:MG-3510 standard mounting baseMorley-IAS Fire Systems By HoneywellHoneywell Fire Systems, BSEL Tech Park, Floor 6,Sector 30A, Opposite Vshi Station, Vashi, New Mumbai,IndiaTel: +91 022 67122427 • Fax: +91 022 67122422E-mail: rk.raman@honeywell.com • Website: www.myhoneywell.comCertificate No: 550b to EN54-5: 2000 + A1: 2002, EN54-7: 2000 + A1: 2002 + A2: 2006 and CEA 4021: 2003Certificate No: 550e to EN54-5: 2000 + A1: 2002, EN54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005 and CEA 4021: 2003Multi-criteria DetectorsCertificated ProductsLPCB Ref.No.MI-PTSE Analogue optical/thermal smoke & heat detector (MI-B501 base) 550b/03Notes:1) Meets the requirements of EN 54-7:2000 at sensitivity settings 1 to 52) Meets the requirements of EN 54-5:2000 at Class A1RMI-PTIR-S2-yy Analogue addressable photo-thermal-IR multi-criteria detector (B501AP, B501,B524IEFT-1, B524HTR and B524RTE bases)Notes:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White2) Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1RMI-PTSE-S2-yyMI-PTIR-S2I-yyAnalogue addressable photo-thermal multi-criteria detector (B501AP, B501, B524IEFT-1,B524HTR and B524RTE bases)Notes:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White2) Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1RAnalogue addressable photo-thermal-IR multi-criteria smoke detector with short circuitisolator (B501AP, B524HTR and B524RTE bases)Notes:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White2) Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1R550b/04550b/05550e/01246 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsMI-PTSE-S2I-yyAnalogue addressable photo-thermal multi-criteria smoke detector with short circuitisolator (B501AP, B524HTR and B524RTE bases)Notes:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White2) Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1RLPCB Ref.No.550e/02Bases:MI-B501 Standard analogue detector baseB501 standard analogue detector baseB501AP intelligent detector baseB524IEFT-1 analogue short circuit isolator baseB524HTR heater baseB524RTE latching relay baseCertificate No: 550c to EN 54-5: 2000 + A1: 2002Certificate No: 550f to EN54-5: 2000 + A1: 2002 and EN 54-17: 2005Point Heat DetectorsCertificated ProductsLPCB Ref.No.MI-FHSE Analogue addressable Class A1S fixed temperature heat detector (MI-B501 base) 550c/04MI-RHSEAnalogue addressable Class A1R high temperature rate of rise heat detector (MI-B501 550c/05base)MI-RHSE-S2-yyAnalogue addressable class A1R rate of rise heat detector (B501AP, B501, B524IEFT-1,B524HTR and B524RTE bases)Note:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White550c/06MI-FHSE-S2-yy Analogue addressable class A1S fixed temperature heat detector (B501AP, B501,B524IEFT-1, B524HTR and B524RTE bases)Note:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates WhiteMI-RHSE-S2I-yyMI-FHSE-S2I-yyBases:MI-B501 Standard analogue detector baseB501 standard analogue detector baseB501AP intelligent detector baseB524IEFT-1 analogue short circuit isolator baseB524HTR heater baseB524RTE latching relay baseAnalogue addressable class A1R rate of rise heat detector with short circuit isolator(B501AP, B524HTR and B524RTE bases)Note:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates WhiteAnalogue addressable class A1S fixed temperature heat detector with short circuitisolator (B501AP, B524HTR and B524RTE bases)Note:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White550c/07550f/01550f/02Certificate No: 550a to EN 54-7: 2000 + A1: 2002 + A2: 2006Certificate No: 550d to EN54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-17: 2005Point Smoke DetectorsCertificated ProductsLPCB Ref.No.MI-PSE Analogue addressable optical smoke detector (MI-B501 base) 550a/03Note: Meets EN 54-7 with low, medium and high sensitivity settingsMI-PSE-S2-yyAnalogue addressable optical smoke detector (B501AP, B501, B524IEFT-1, B524HTRand B524RTE bases)Notes:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White2) Meets the requirements of EN 54-7: 2000 at high and low sensitivity550a/04MI-PSE-S2I-yyAnalogue addressable optical smoke detector with short circuit isolator (B501AP,B524HTR and B524RTE bases)Notes:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White550d/0118 Jan 2014 247

Certificated Productsisolator (B501AP, B524HTR and B524RTE bases)Note: Certified at the following settings: -PART 1: SECTION 4.1COMMERCIAL DETECTORSLPCB Ref.No.Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1RHRZ-1002 Conventional photo thermal detector (HRZ-1000BSD base) 199p/04MI-PTIR-S2Analogue addressable photo-thermal-IR multi-criteria sensor (B501AP, B501, B524IEFT- 199p/061, B524HTR and B524RTE bases)Note: Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1RMI-PTSE-S2Analogue addressable photo-thermal multi-criteria sensor (B501AP, B501, B524IEFT-1, 199p/07B524HTR and B524RTE bases)Note: Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1RBases:B501 standard analogue detector baseB501AP intelligent detector baseB501DG analogue sensor deep baseB524IEFT analogue short circuit isolator baseB524IEFT-1 analogue sensor short circuit isolator baseB524HTR heater baseB524RTE latching relay baseHRZ-1000BSD standard base with Schottky diodeCertificate No: 199m to EN 54-7: 2000 + A1: 2002Certificate No: 118h to EN 54-7: 2000Certificate No: 199ab to EN 54-7: 2000 + A1: 2002 & EN 54-17: 2005Point Smoke DetectorsCertificated ProductsLPCB Ref.No.MI-LZRAnalogue addressable photoelectric laser smoke detector (B501, B501DG and B524IEFT 118h/01bases)Meets the requirements of EN 54-7 at sensitivity settings of 7 to 9 inclusive.-MI-PSE-S2IAnalogue addressable optical smoke sensor with short circuit isolator (B501AP,199ab/01B524HTR and B524RTE bases)Note: Meets the requirements of EN 54-7: 2000 at high and low sensitivityHRZ-1003 Conventional photoelectric detector (HRZ-1000BSD base) 199m/05MI-PSE-S2Analogue addressable optical smoke sensor (B501AP, B501, B524IEFT-1, B524HTRand B524RTE bases)Note: Meets the requirements of EN 54-7: 2000 at high and low sensitivity199m/10Bases:B501 analogue detector baseB501DG analogue deep baseB524IEFT analogue short circuit isolator baseB501AP intelligent sensor baseB524IEFT-1 short circuit isolator baseB524HTR heater baseB524RTE latching relay baseHRZ-1000BSD standard base with Schottky diodeCertificate No: 199w to EN 54-12: 2002 and EN 54-17: 2005Beam DetectorsCertificated ProductsLPCB Ref.No.MI-LPB2-S2I Analogue optical beam detector with short circuit isolator feature 199w/01Note:1. Meets the requirements of BS EN 54-12: 2002 at sensitivity levels 1, 2, 3, 4 andAcclimate levels 1 & 218 Jan 2014 249

PART 1: SECTION 4.1COMMERCIAL DETECTORSAncillaries:RTS151-KEYRemote test Station6500 - LRK/BEAMLRK Long Range Kit6500 - MMK/BEAMMMK Multi-Mounting Kit6500 - SMK/BEAMSMK Surface Mounting KitCertificate No: 199ae to EN54-17: 2005 & EN54-20: 2006Aspirating Smoke DetectorsCertificated ProductsLPCB Ref.No.MI-FL2011EI Analogue addressable single channel loop-based aspirating detector (B501AP base) 199ae/01Notes:1. For compliance with Clause 5.10 of EN54-20: 2006, the detector must be supplied bya power supply complying with EN54-4.2. The approval of the detector is conditional upon the following requirements: Systemdesign, installation and commissioning shall be performed in accordance with the FAASTAdvanced set-up and control guide (I56-3888-000).3. The device is only approved at sensitivity Level 1 (0.07%/m) meeting Classes A, Band C. The Class of any pipe/hole configuration and detector sensitivity must bedetermined using PipeIQLT software (version 1.2.9).MI-FL2012EIMI-FL2022EIAnalogue addressable single channel loop-based aspirating detector, dual sensors(B501AP base)Notes:1. For compliance with Clause 5.10 of EN54-20: 2006, the detector must besupplied by a power supply complying with EN54-4.2. The approval of the detector is conditional upon the following requirements:System design, installation and commissioning shall be performed in accordance withthe FAAST Advanced set-up and control guide (I56-3888-000).3. The device is only approved at sensitivity Level 1 (0.07%/m) meeting Classes A,B and C. The Class of any pipe/hole configuration and detector sensitivity must bedetermined using PipeIQLT software 1.2.9).Analogue addressable dual channel loop-based aspirating detector, dual sensors(B501AP base)Notes:1. For compliance with Clause 5.10 of EN54-20: 2006, the detector must besupplied by a power supply complying with EN54-4.2. The approval of the detector is conditional upon the following requirements:System design, installation and commissioning shall be performed in accordance withthe FAAST Advanced set-up and control guide (I56-3888-000).3. The device is only approved at sensitivity Level 1 (0.07%/m) meeting Classes A,B and C. The Class of any pipe/hole configuration and detector sensitivity must bedetermined using PipeIQLT software 1.2.9).199ae/02199ae/03Base:B501APintelligent sensor baseMultron Systems Pte Ltd217 Kallang Bahru, Multron Building, Singapore 339 347, SingaporeTel: +65 6743 2555 / 6395 6868 • Fax: +65 6743 2777 / 6395 6869E-mail: info@multron.com • Website: www.multron.comCertificate No: 1148a to EN 54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsLPCB Ref.No.DET-C632 Conventional rate of rise & fixed temperature heat detectorstandard base) 1148a/01Note:Meets the requirements of EN 54-5 at Class A2RDET-A103Intelligent Class A1R heat detector(DZ-03 base)548c/02Bases:DZ-03Standard detector base250 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSDB-6Standard detector baseCertificate No: 548d-(cl-6) to EN 54-7: 2000 + A1: 2002 + A2: 2006Certificate No: 1148b to EN 54-7:2001 + A1: 2002 + A2: 2006Photoelectric Smoke DetectorsCertificated ProductsDET-C631DET-A102Conventional optical smoke detector(DB-6 Standard base)Note:Meets the requirements of EN 54-7 in the normal sensitivity setting.Intelligent Photoelectric Smoke Detector(DZ-03 base)LPCB Ref.No.1148b/01548d/02Bases:DZ-03DB-6Standard detector baseStandard detector baseCertificate No: 548k-(cl-6) to EN 54-12: 2002Beam DetectorsCertificated ProductsLPCB Ref.No.DET-105RB Intelligent Optical Beam Detector 548k/01Notes:1: Meets the requirements of EN 54-12 at the following sensitivity settings:Level 1 1.61 dBLevel 2 2.31dBNitin Ventures FZEP.O. Box 262294, Jebel Ali Free Zone, Dubai, United Arab EmiratesTel: +97 148865858/859 • Fax: +97 148865800E-mail: sales@nitinventures.com • Website: www.nitinfire.comCertificate No: 010h-(cl-1) to EN 54-7: 2000 + A1: 2002, EN 54-5: 2000 + A1: 2002, CEA 4021: 2003Multi-Criteria DetectorsCertificated ProductsLPCB Ref.No.NV-I-MS Analogue addressable multisensor detector (NV-IA-SB mounting base) 010h/01Notes:1) Certificated at the following settings:Mode 1 - High sensitivity smoke detector with standard heat enhancementMode 2 - Smoke detection onlyMode 3 - Medium sensitivity smoke detector with standard heat enhancementMode 4 - Low sensitivity smoke detector with high heat enhancementMode 5 - Class A1 heat detectorAlso approved in conventional alarm modes 1, 2, 3, 4 and 5.Bases:NV-IA-SB Mounting BaseCertificate No: 010p-(cl-1) to EN 54-5: 2000 + A1: 2002Point Heat DetectorsCertificated ProductsLPCB Ref.No.NV-I-H Analogue addressable heat detector (NV-IA-SB mounting base) 010p/03Notes:1) Meets the requirements of EN54: Part 5 -Class A1R in mode 1 and in conventional modeClass A2 in mode 2 and in conventional mode18 Jan 2014 251

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLPCB Ref.No.Class A2S in mode 3 and in conventional modeClass CR in mode 4 and in conventional modeClass CS in mode 5 and in conventional mode.NV-C-H-A1R Conventional class A1R heat detector - flashing LED (NV-C-SB mounting base) 010p/05Notes:1) Meets the requirements of EN54: Part 5 - Class A1RNV-C-H-CS Series 65 Conventional Class CS heat detector -Flashing LED (NV-C-SB mounting base)Meets the requirements of EN54: Part 5 - Class CSBases:NV-IA-SB mounting baseNV-C-SB mounting base010p/14Certificate No: 010q-(cl-1) to EN 54-7: 2000 + A1: 2002Point Smoke DetectorsCertificated ProductsLPCB Ref.No.NV-I-I Analogue addressable ionisation smoke detector (NV-IA-SB mounting base) 010q/02Notes:1) Meets the requirements of EN54-7: 2000 in modes 1,2,3,4 and 5 in conventional modeNV-I-O Analogue addressable optical smoke detector (NV-IA-SB mounting base) 010q/03Notes:1) Meets the requirements of EN54-7:2000 in modes 1,2,3 4 and 5 in conventional modeNV-C-I Conventional ionisation smoke detector - flashing LED (NV-C-SB mounting base) 010q/05NV-C-O Conventional optical smoke detector- flashing LED (NV-C-SB mounting base) 010q/11Bases:NV-IA-SB mounting baseNV-C-SB mounting baseNittan Europe LimitedHipley Street, Old Woking, Surrey GU22 9LQ, United KingdomTel: +44 (0)1483 769555/8 • Fax: +44 (0)1483 756686E-mail: sales@nittan.co.uk • Website: www.nittan.co.ukCertificate No: 041f to EN54-7: 2000 + A1: 2002 + A2: 2006Certificate No: 842a-(cl-1) to EN-54-7: 2000 + A1: 2002 + A2: 2006Certificate No: 755a-(cl-1) to EN54-7: 2000 + A1: 2002Point Smoke DetectorsCertificated ProductsEV-PEVC-PEVC-DPEVC-PST-P-OMAnalogue addressable optical smoke detector (UB-4,UB-4-EV,UB-4-SD and STB-4SE-EV bases)Note: Meets the requirements of EN 54-7 at Lowest and Highest sensitivity settings only.EVC-P Conventional optical smoke detector(STB-4-SE-24VR, STB-4SE, UB-4,UB-4-EV,UB-4SD and STB-4SE-EV bases)Conventional Dual Optical Smoke Detector(STB-4, STB-4SD, STB-4SE, STB-4SE-24VR, UB-4 and UB-5 bases)Conventional optical smoke detector(STB-4-SE24VR, STB-4-SE ,STB-4 , UB-4 and UB-4SD bases)Conventional optical smoke detector(STB-4-SE24VR, STB-4-SE ,STB-4, UB-4 , UB-4R470 and UB-4SDR470 bases)LPCB Ref.No.041f/01041f/03755a/01842a/01842a/02ST-PY-AS Analogue addressable photoelectric smoke detector (STB-4-SE ,STB-4 and UB-4 bases) 842a/03EV-PAnalogue addressable photoelectric smoke detector,STB-4-SE-EV and UB4-EV bases)Note: Meets the requirements of EN 54-7 at Lowest and Highest sensitivity settings only.842a/04BasesSTB-4 Standard mounting baseSTB-4SE-EV mounting baseSTB-4SE Standard deep mounting base252 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSSTB-4SD Schottky diode mounting baseSTB-4-SE-24VR Relay mounting baseUB-4 Universal mounting base 4 terminalUB-5 Universal mounting base 5 terminalUB-4-EV Universal baseUB-4SD Universal base with Shottky diodeCertificate No: 041h to EN 54-5: 2000 + A1: 2002Point Heat DetectorsCertificated ProductsEV-H-A1REV-H-CSEVC-H-A2SEVC-H-CSAnalogue addressable Class A1R heat detector(UB-4,UB-4-EV,UB-4SD and STB-4SE-EV bases)Analogue addressable Class CS heat detectorand STB-4SE-EV bases)Conventional Class A2S heat detector(UB-4,UB-4-EV,UB-4SD and STB-4SE-EV bases)Conventional Class CS heat detectorand STB-4SE-EV bases)LPCB Ref.No.041h/01041h/02041h/03041h/04BasesUB-4 Universal baseUB-4-EV Universal baseUB-4SD Universal base with Shottky diodeSTB-4SE-EV mounting baseCertificate No: 041g to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1:2002 + A2: 2006 and CEA4021: 1999Multi-criteria DetectorsCertificated ProductsEV-PHAnalogue addressable optical smoke / class A1R heat detector(UB-4,UB-4-EV,UB-4SD and STB-4SE-EV bases)Note: Meets the requirements of EN 54-7 at Lowest and Highest sensitivity settings.LPCB Ref.No.041g/01BasesUB-4 Universal baseUB-4-EV Universal baseUB-4SD Universal base with Shottky diodeSTB-4SE-EV mounting baseNotifier by Honeywell (Pittway Systems Technology Group (Europe) Ltd)Charles Avenue, Burgess Hill, West Sussex RH15 9UF, United KingdomTel: +44 (0)1444 230300 • Fax: +44 (0)1444 230888E-mail: sales@notifiersystems.co.uk • Website: www.notifierfiresystems.co.ukCertificate No: 199m to EN 54-7: 2000 + A1: 2002Certificate No: 118h to EN 54-7: 2000 + A1: 2002Certificate No: 199ab to EN 54-7: 2000 + A1: 2002 & EN 54-17: 2005Point Smoke DetectorsCertificated ProductsLPCB Ref.No.FSL-751EAnalogue addressable photoelectric laser smoke detector118h/01(B501, B501DG & B5241EFT bases)Note: meets the requirements of EN 54:Part 7 at sensitivity settings of 7 to 9 inclusive.NFXI-OPTAnalogue addressable optical smoke sensor with short circuit isolator (B501AP,199ab/01B524HTR & B524RTE bases)Note: Meets the requirements of EN 54-7: 2000 at high and low sensitivitySD-851E Conventional photoelectric smoke detector (B401 base) 199m/03IDX-751 AEIntrinsically safe analogue addressable photoelectric smoke detector (B501, B501APbases)199m/0718 Jan 2014 253

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsNFX-OPTNote: Meets EN54-7: 2000 at High, Normal & Low sensitivity settingsAnalogue addressable optical smoke sensor (B501AP, B501, B524IEFT-1, B524HTR &B524RTE bases)Note: Meets the requirements of EN 54-7: 2000 at high and low sensitivityLPCB Ref.No.199m/10Bases:B501 baseB401 baseB501DG deep baseB5241EFT short circuit isolator baseB524IEFT-1 analogue short circuit isolator baseB524HTR heater baseB524RTE latching relay baseB501AP Intelligent detector baseCertificate No: 199n to EN 54-5: 2000 + A1: 2002Certificate No: 199ac to EN 54-5: 2000 + A1: 2002 & EN 54-17: 2005Point Heat DetectorsCertificated ProductsLPCB Ref.No.NFXI-TFIX58Analogue addressable class A1S fixed temperature heat sensor with short circuit isolator 199ac/01(B501AP, B524HTR & B524RTE bases)NFXI-TFIX78Analogue addressable class BS fixed temperature heat sensor with short circuit isolator 199ac/02(B501AP, B524HTR & B524RTE bases)NFXI-TDIFFAnalogue addressable class A1R rate of rise heat sensor with short circuit isolator 199ac/03(B501AP, B524HTR & B524RTE bases)FD-851RE Conventional Class A1R rate of rise heat detector (B401 base) 199n/07FD-851HTE Conventional Class BS heat detector (B401 base) 199n/08NFX-TDIFFAnalogue addressable class A1R rate of rise heat sensor (B501AP, B501, B524IEFT-1, 199n/15B524HTR & B524RTE bases)NFX-TFIX78 Analogue addressable class BS fixed temperature heat sensor (B501AP, B501,199n/16B524IEFT-1, B524HTR & B524RTE bases)NFX-TFIX58 Analogue addressable class A1S fixed temperature heat sensor (B501AP, B501,B524IEFT-1, B524HTR & B524RTE bases)199n/17Bases:B501 baseB401 baseB401R standard base with resistorB401RSD standard base with resistor and schottky diodeB401SD standard base with schottky diodeB401DG deep baseB501AP intelligent sensor baseB524IEFT-1 analogue short circuit isolator baseB524HTR heater baseB524RTE latching relay baseCertificate No: 199p to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 & CEA 4021: 2003Certificate No: 199t to LPS 1279 - 1.0: 2006, EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 & CEA 4021: 2003Certificate No: 199aa to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002, CEA 4021: 2003 & EN 54-17: 2005Multi-criteria DetectorsCertificated ProductsNFXI-SMT3NFXI-SMT2Analogue addressable photo-thermal-IR multi-criteria smoke sensor with short circuitisolator (B501AP, B524HTR & B524RTE bases)Note: Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1RAnalogue addressable photo-thermal multi-criteria smoke sensor with short circuitisolator (B501AP, B524HTR & B524RTE bases)Note: Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003LPCB Ref.No.199aa/01199aa/02Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1RSD-851TE Conventional photoelectric/thermal detector (B401 base) 199p/03Note: Meets the requirements of EN54-7: 2000 at "High", 'Medium' and 'Low' sensitivity254 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsNFX-SMT3NFX-SMT2IRX-751CTEMsettingsAnalogue addressable photo-thermal-IR multi-criteria sensor (B501AP, B501, B524IEFT-1, B524HTR & B524RTE bases)Note: Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1RAnalogue addressable photo-thermal multi-criteria sensor (B501AP, B501, B524IEFT-1,B524HTR & B524RTE bases)Note: Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1RAnalogue addressable multi-criteria fire detector incorporating CO, photoelectric, thermaland IR sensors (B501, B501DG and B524IEFT-1 bases)Note: Certified at the following settings: -Normal Mode:Alarm Levels 1 to 5 (Multi-criteria): EN54-5 Class A1R, EN54-7, LPS1279 and CEA 4021Alarm Level 6 (Heat Only Mode): EN54-5 Class A1RNuisance Environment Applications:Application 0, Alarm Level 4 EN54-7, LPS1279 & CEA 4021Application 1, Alarm Level 5 EN54-5 Class A1R, EN54-7 & CEA 4021Application 2, Alarm Level 4 or 5 EN54-5 Class A1R, EN54-7 & CEA 4021Application 3, Alarm Level 5 EN54-5 Class A1R, EN54-7 & CEA 4021Application 4, Alarm Level 5 EN54-5 Class A1R, EN54-7 & CEA 4021Application 5, Alarm Level 5 EN54-7 & CEA 4021Application 6, Alarm Level 5 EN54-5 Class A1R, EN54-7 & CEA 4021LPCB Ref.No.199p/06199p/07199t/01Bases:B501 baseB401 baseB501DG deep baseB524IEFT-1 analogue short circuit isolator baseB501AP intelligent sensor baseB524HTR heater baseB524RTE latching relay baseCertificate No: 199w to EN 54-12: 2002 and EN 54-17: 2005Beam DetectorsCertificated ProductsLPCB Ref.No.NFXI-BEAM Analogue optical beam detector with short circuit isolator feature. 199w/01Note:1. Meets the requirements of BS EN 54-12: 2002 at sensitivity levels 1, 2, 3, 4 andAcclimate levels 1 & 2NFXI-BEAM-T Analogue optical beam detector with self test facility and short circuit isolator feature. 199w/02Note:1. Meets the requirements of BS EN 54-12: 2002 at sensitivity levels 1, 2, 3, 4 andAcclimate levels 1 & 2Ancillaries:RTS151-KEYRemote test Station6500 - LRK/BEAMLRK Long Range Kit6500 - MMK/BEAMMMK Multi-Mounting Kit6500 - SMK/BEAMSMK Surface Mounting KitCertificate No: 199af-(cl-1) to EN54-17: 2005 & EN54-20: 2006Aspirating Smoke DetectorsCertificated ProductsLPCB Ref.No.NFXI-ASD11 Analogue addressable single channel loop-based aspirating detector 199af/01Notes:1. For compliance with Clause 5.10 of EN54-20: 2006, the detector must besupplied by a power supply complying with EN54-4.2. The approval of the detector is conditional upon the following requirements:18 Jan 2014 255

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLPCB Ref.No.System design, installation and commissioning shall be performed in accordancewith the FAAST Advanced set-up and control guide (I56-3888-000).3. The device is only approved at sensitivity Level 1 (0.07%/m) meeting Classes A,B and C. The Class of any pipe/hole configuration and detector sensitivity mustbe determined using PipeIQLT software (version 1.2.9).NFXI-ASD12 Analogue addressable single channel loop-based aspirating detector dual sensors 199af/02Notes:1. For compliance with Clause 5.10 of EN54-20: 2006, the detector must besupplied by a power supply complying with EN54-4.2. The approval of the detector is conditional upon the following requirements:System design, installation and commissioning shall be performed in accordancewith the FAAST Advanced set-up and control guide (I56-3888-000).3. The device is only approved at sensitivity Level 1 (0.07%/m) meeting Classes A,B and C. The Class of any pipe/hole configuration and detector sensitivity mustbe determined using PipeIQLT software (version 1.2.9).NFXI-ASD22 Analogue addressable dual channel loop-based aspirating detector dual sensors 199af/03Notes:1. For compliance with Clause 5.10 of EN54-20: 2006, the detector must besupplied by a power supply complying with EN54-4.2. The approval of the detector is conditional upon the following requirements:System design, installation and commissioning shall be performed in accordancewith the FAAST Advanced set-up and control guide (I56-3888-000).3. The device is only approved at sensitivity Level 1 (0.07%/m) meeting Classes A,B and C. The Class of any pipe/hole configuration and detector sensitivity mustbe determined using PipeIQLT software (version 1.2.9).Base:B501APintelligent sensor baseNotifier Fire Systems IndiaHoneywell Fire Systems, BSEL Tech Park, Floor 6, 603, Sector 30A, opposite Vashi Station, Vashi, NewMumbia, IndiaTel: +91 022 67122427 • Fax: +91 02267122422E-mail: rk.raman@honeywell.com • Website: www.myhoneywell.comCertificate No: 550b to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 and CEA 4021: 2003Certificate No: 550e to EN54-5: 2000 + A1: 2002, EN54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005 and CEA 4021: 2003Multi-criteria DetectorsCertificated ProductsSDX-751TEMNFX-SMT2-yyNFXI-SMT2-yyAnalogue optical/thermal smoke & heat detector (B501, B501DG and B5241EFT-1bases)Notes:1) Meets the requirements of EN 54-7:2000 at sensitivity settings 1 to 52) Meets the requirements of EN 54-5:2000 at Class A1RAnalogue addressable photo-thermal multi-criteria detector (B501AP, B501, B524IEFT-1,B524HTR and B524RTE bases)Notes:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White2) Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1RAnalogue addressable photo-thermal multi-criteria smoke detector with short circuitisolator (B501AP, B524HTR and B524RTE bases)Notes:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White2) Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1RLPCB Ref.No.550b/03550b/05550e/02Bases:256 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSB501 Standard baseB501DG Deep analogue detector baseB5242EFT-1 Short circuit islolator baseB501AP intelligent detector baseB524HTR heater baseB524RTE latching relay baseCertificate No: 550c to EN 54-5: 2000 + A1: 2002Certificate No: 550f to EN 54-5: 2000 + A1: 2002 and EN 54-17: 2005Point Heat DetectorsCertificated ProductsFDX-551EMAnalogue addressable Class A1S fixed temperature heat detector (B501,B501DG and B5241EFT-1 bases)FDX-551REMAnalogue addressable Class A1R high temperature rate of rise heat detector (B501,B501DG and B5241EFT-1 bases)NFX-TDIFF-yyAnalogue addressable class A1R rate of rise heat detector (B501AP, B501, B524IEFT-1,B524HTR and B524RTE bases)Note:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates WhiteNFX-TFIX58-yy Analogue addressable class A1S fixed temperature heat detector (B501AP, B501,B524IEFT-1, B524HTR and B524RTE bases)Note:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates WhiteNFXI-TDIFF-yyAnalogue addressable class A1R rate of rise heat detector with short circuit isolator(B501AP, B524HTR and B524RTE bases)Note:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates WhiteNFXI-TFIX58-yyAnalogue addressable class A1S fixed temperature heat detector with short circuitisolator (B501AP, B524HTR and B524RTE bases)Note:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates WhiteLPCB Ref.No.550c/04550c/05550c/06550c/07550f/01550f/02Bases:B501 Standard baseB501DG Deep analogue detector baseB542IEFT-1 Short circuit islolator baseB501AP intelligent detector baseB524HTR heater baseB524RTE latching relay baseCertificate No: 550a to EN 54-7: 2000 + A1: 2002 + A2: 2006Certificate No: 550d to EN54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-17: 2005Point Smoke DetectorsCertificated ProductsLPCB Ref.No.SDX-751EM Analogue addressable optical smoke detector (B501, B501DG and B5241EFT-1 bases) 550a/03Notes:1) Meets EN 54-7 with low, medium and high sensitivity settingsNFX-OPT-yyNFXI-OPT-yyBases:B501 standard analogue detector baseB501DG deep analogue detector baseB5241EFT-1 analogue short circuit isolator baseB501AP intelligent detector baseAnalogue addressable optical smoke detector (B501AP, B501, B524IEFT-1, B524HTRand B524RTE bases)Notes:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White2) Meets the requirements of EN 54-7: 2000 at high and low sensitivityAnalogue addressable optical smoke detector with short circuit isolator (B501AP,B524HTR and B524RTE bases)Notes:1) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White2) Meets the requirements of EN 54-7: 2000 at high and low sensitivity550a/04550d/0118 Jan 2014 257

PART 1: SECTION 4.1COMMERCIAL DETECTORSB524HTR heater baseB524RTE latching relay baseOlympia Electronics S.A.Kolindros Pierias, 60061, GreeceTel: (+30) 2353051200 • Fax: (+30 )2353051486E-mail: info@olympia-electronics.gr • Website: www.olympia-electronics.grCertificate No: 1010b to EN 54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated ProductsLPCB Ref.No.BSR-6055/A Analogue addressable optical smoke detector (BSR-6055/A base) 1010b/01Note:1. Meets the requirements of EN 54-7: 2000 at sensitivity setting 0.120dB/mBS-655 Conventional optical smoke detector (BS-655 base) 1010b/02BasesBS-655 BaseBSR-6055/A BaseOrient Corporation Pte. Ltd.Block 3018, Bedok North Street 5, #05-51, Eastlink Light Industrial Building 486132, SingaporeTel: (+65) 6242 5489 • Fax: (+65) 6241 2291E-mail: corporate@orientcorp.netCertificate No: 506a-(cl-5) to EN 54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated ProductsLPCB Ref.No.OCI 60041 (2 wire) Conventional photoelectric smoke detector (OCI 60041-MPB base) 506a/02BaseOCI 60041-MPBMounting BaseCertificate No: 506b-(cl-3) to EN 54-7: 2000 + A1: 20002 + A2: 2006, EN 54-5: 2000 + A1: 2002 & CEA 4021: 2003Multi-Sensor/Multi-Criteria DetectorsCertificated ProductsLPCB Ref.No.OCI 60042 (2 Wire) Optical smoke and class A2 heat detector (OCI 60041-MPB base) 506b/01Note:1. Meets the requirements of EN54-5 for class A2BaseOCI 60041-MPBMounting BaseCertificate No: 506c-(cl-4) to EN 54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsOCI 60043 (2 Wire) Conventional Class A2 rate of rise and fixed temperature heat detector (OCI60041-MPB base)Note:1. Meets the requirements of EN54-5 for class A2LPCB Ref.No.506c/01Base258 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSOCI 60041-MPB Mounting basePanasonic Corporation1668, Fujikata, Tsu-shi, Mie-ken, JapanTel: +46 40 697 70 00 • Fax: +46 40 697 70 99E-mail: info.pesn@eu.panasonic.com • Website: http://pesn.panasonic.seCertificate No: 1012a-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated ProductsType 2840Intrinsically safe analogue addressable photoelectric smoke detector(Type 2843 base)LPCB Ref.No.1012a/01Base:Type 2843Intrinsically safe backboxCertificate No: 1012b-(cl-1) to EN 54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsType 2841Intrinsically safe analogue addressable class P heat detector(Type 2843 base)Note:Meets EN54 Part 5 for classes A1, A2S & BSLPCB Ref.No.1012b/01Base:Type 2843Intrinsically safe backboxPelco Finland OySokerilinnantie 11C, 02600, Espoo, FinlandTel: +358 10 446 511 • Fax: +358 10 446 5103E-mail: info.fi@pelco.com • Website: www.pelco.com/nordicCertificate No: 199u to EN 54-12: 2002Certificate No: 199w to EN 54-12: 2002 and EN 54-17: 2005Beam DetectorsCertificated ProductsEB-6500REB-6500RSConventional optical beam detectorNote:1. Meets the requirements of EN 54-12: 2002 at sensitivity levels 1,2,3,4 & Acclimatelevels 1 & 2Conventional optical beam detector with self test facilityNote:1. Meets the requirements of EN 54-12: 2002 at sensitivity levels 1,2,3,4 & AcclimateLPCB Ref.No.199u/01199u/02levels 1 & 2EB-6500A Analogue optical beam detector with short circuit isolator feature 199w/01Note: meets the requirements of BS EN 54-12: 2002 at sensitivity levels 1, 2, 3, 4 andAcclimate levels 1 & 2EB-6500SA Analogue optical beam detector with self test facility and short circuit isolator feature 199w/02Note: meets the requirements of BS EN 54-12: 2002 at sensitivity levels 1, 2, 3, 4 andAcclimate levels 1 & 2Ancillaries:RTS151-KEYRemote test Station18 Jan 2014 259

PART 1: SECTION 4.1COMMERCIAL DETECTORS6500 - LRK/BEAMLRK Long Range Kit6500 - MMK/BEAMMMK Multi-Mounting Kit6500 - SMK/BEAMSMK Surface Mounting KitCertificate No: 199m to EN 54-7: 2000 + A1: 2002Smoke DetectorsCertificated ProductsED2351EConventional photoelectric detector(B401, B401DG, B401R, B401SD and B401RSD bases)Note:1. Meets EN 54-7: 2000 with Low, Medium and High sensitivitesLPCB Ref.No.199m/03Bases:B401 standard baseB401DG deep baseB401R standard base with 470 ohm resistorB401SD standard base with schottky diodeB401RSD standard base with 470 ohm resistor and schottky diodeB501 Analogue sensor baseB501DG Analogue sensor deep baseB524IEFT Analogue sensor isolator baseB524HTR Heater baseB524RTE Latching relay baseCertificate No: 199n to EN 54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsED5351EED4351EED5351TEClass A1R conventional rate of rise heat detector(B401, B401DG, B401R and B401RSD bases)Class BS conventional heat detector(B401, B401DG, B401R, B401SD and B401RSD bases)Class A2S conventional fixed temperature heat detector(B401, B401R, B401RSD, B401SD and B401DG bases)LPCB Ref.No.199n/07199n/08199n/14Bases:B401 standard baseB401DG deep baseB401R standard base with 470 ohm resistorB401SD standard base with schottky diodeB401RSD standard base with 470 ohm resistor and schottky diodeB501 analogue sensor baseB501AP intelligent detector baseB501DG analogue sensor deep baseB524IEFT analogue sensor isolator baseB524IEFT-1 analogue short circuit isolator baseB524HTR heater baseB524RTE latching relay baseCertificate No: 199p to EN54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 & CEA 4021: 2003Certificate No: 199t to LPS 1279 - 1.0: 2006, EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 & CEA 4021: 2003Certificate No: 010aq-(cl-2) to LPS 1274: 2005 EN 54-5: 2000 + A1: 2002 LPS 1265: 2004Multi Criteria DetectorsCertificated ProductsEDI-55Analogue addressable CO/heat multisensor detector(EBI-10, base)Notes:1. Approved with the following mode configurations:-Mode 1 30 ppm with high thermal enhancement (most sensitive)Mode 2 33 ppm with CO onlyLPCB Ref.No.010aq/01260 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsED2351TEMESMI2251CTLEMode 3 40 ppm with low thermal enhancement (nominal sensitivity)Mode 4 45 ppm with high thermal enhancement (least sensitive)Mode 5 heat onlyA1R2. Mode 1 , 3, and 4 are approved to LPS1274:2005 and EN 54-5:2000 + A1:20023. Mode 2 is approved to LPS 1265:20044. Mode 5 is approved to EN 54-5:2000 + A1:2002Conditions of approval include;The EDI-55 should only be installed in accordance with the manufacturersrecommendations.The EDI-55 should not be set only as a carbon monoxide fire detector where there is aspecific risk of rapid burning/flaming fires.Refer to technical publication D01692 for limitations on the use of carbon monoxide firedetection.Conventional optical/thermal smoke & heat detector(B401, B401DG, B401R, B401SD and B401RSD bases)Note:1. Meets the requirements of EN 54-5: 2000 at class A1R and EN 54-7: 2000 at High,Medium and Low.Analogue addressable multi-criteria fire detector and incorporating CO, photoelectric,thermal and IR sensors (B501, B501AP, B501DG and B524IEFT-1 bases)Note: Certified at the following settings: -Normal Mode:Alarm Levels 1 to 5 (Multi-criteria) EN54-5 Class A1R, EN54-7, LPS1279 and CEA 4021Alarm Level 6 (Heat Only Mode): EN54-5 Class A1RNuisance Environment Applications:Application 0, Alarm Level 4 EN54-7, LPS1279 & CEA 4021Application 1, Alarm Level 5 EN54-5 Class A1R, EN54-7 & CEA 4021Application 2, Alarm Level 4 or 5 EN54-5 Class A1R, EN54-7 & CEA 4021Application 3, Alarm Level 5 EN54-5 Class A1R, EN54-7 & CEA 4021Application 4, Alarm Level 5 EN54-5 Class A1R, EN54-7 & CEA 4021Application 5, Alarm Level 5 EN54-7 & CEA 4021Application 6, Alarm Level 5 EN54-5 Class A1R, EN54-7 & CEA 4021LPCB Ref.No.199p/03199t/01Bases:B401 standard baseB401DG deep baseB401R standard base with 470 ohm resistorB401SD standard base with schottky diodeB401RSD standard base with 470 ohm resistor and schottky diodeB501 standard analogue detector baseB501AP intelligent detector baseB501DG Deep detector baseB524IEFT Short circuit isolator baseB524HTR Heater baseB524RTE Latching relay baseEBI-10 Standard Intelligent Mounting BasePhilton Fire & Security Limited61 Lower Road, Harrow, Middlesex HA2 0DE, United KingdomTel: +44(0) 20-8864-7534 • Fax: +44(0) 20 8864 8631E-mail: james.colyer@philton.com • Website: www.philton.comCertificate No: 404c to EN54-20:2006Aspirating Smoke DetecorsCertificated ProductsGuardian LaserSTAMPhigh sensitivity aspiratingsmoke detectorNotes:1. For compliance with Clause 5.10 of EN 54-20: 2006, the detector shall besupplied with power from a power supply complying with EN 54-4.2. The approval of the detector is conditional upon the following requirements:- Design, installation and commissioning are performed in accordancewith the system design manual and instructions.LPCB Ref.No.404c/0118 Jan 2014 261

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated Products3. The device is approved for sensitivity Classes A, B and C for sensitivities up to0.31%/m. The Class of any pipe/hole configuration and detector sensitivitymust be determined using PipeCAD.LPCB Ref.No.Pittway Tecnologica Srl.Via Caboto 19/3, 34147 Trieste, ItalyTel: +39 040 94 90111 • Fax: +39 040 38 2137E-mail: sandro_bonin@systemsensor.com • Website: www.systemsensoreurope.comEuropean Sales:System Sensor Europe, Life Safety Distribution AG, Wilstrasse 11 (Building U31), CH-8610 Uster, SwitzerlandTel: +41 44 943 4424 • Fax: +41 44 943 4399E-mail: sse.marketing@systemsensor.com • Website: www.systemsensoreurope.comCertificate No: 199m to EN 54-7: 2000 + A1: 2002 + A2: 2006Certificate No: 199ab to EN 54-7: 2000 + A1: 2002 & EN 54-17: 2005Point Smoke DetectorsCertificated ProductsLPCB Ref.No.199ab/0122051EIAnalogue addressable optical smoke sensor with short circuit isolator (B501AP,B524HTR and B524RTE bases)Note: Meets the requirements of EN 54-7: 2000 at high and low sensitivityECO1003Conventional photoelectric smoke detector (ECO1000DB, ECO1000DBR and199m/01ECO1000DBRSD)2351EConventional photoelectric smoke detector (B401, B40DG, B401R, B401SD and199m/03B401RSD bases)Note: Meets the requirements of EN54-7:2000 at low, medium and high sensitivitysettingsVision 2020P Conventional photoelectric detector (2020B, 2020DB, 2020BSD, 2020DBSD bases) 199m/0522051EISE22051EIntrinsically safe analogue addressable photoelectric smoke detector (B501, B501AP,B524HTR and B524RTE bases)Note: Meets EN54-7: 2000 at High, Normal & Low sensitivity settingsAnalogue addressable optical smoke sensor (B501AP, B501, B524IEFT-1, B524HTR &B524RTE bases)Note: Meets the requirements of EN 54-7: 2000 at high and low sensitivityBases:2020B standard base2020DB deep base2020BSD standard base with schottky diode2020DBSD deep base with schottky diodeB401 standard baseB401DG deep baseB401R standard base with 470 ohm resistorB401SD standard base with schottky diodeB401RSD standard base with 470 ohm resistor and schottky diodeB501 standard analogue detector baseB501AP intelligent detector baseB501DG analogue sensor deep baseB524IEFT analogue sensor isolator baseB524IEFT-1 analogue short circuit isolator baseB524HTR heater baseB524RTE latching relay baseECO1000B standard base.ECO1000BSD standard base with schottky diode.ECO1000BR standard base, 470 ohm resistor.ECO1000BRSD standard base, 470 ohm resistor and schottky diode.ECO1000BR680 standard base, 680 ohm resistor.ECO1000BR680SD standard base, 680 ohm resistor and schottky diode.ECO1000BR1000 standard base, 1000 ohm resistor.ECO1000BR1000SD standard base, 1000 ohm resistor and schottky diode.ECO1000DB deep base199m/07199m/10262 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSECO1000DBR deep base with 470 ohm resistorECO1000DBRSD deep base with 470 ohm resistor and schottky diodeECO2000B mounting base.Certificate No: 199n to EN 54-5: 2000 + A1: 2002Certificate No: 199ac to EN 54-5: 2000 + A1: 2002 & EN 54-17: 2005Point Heat DetectorsCertificated ProductsLPCB Ref.No.52051EIAnalogue addressable class A1S fixed temperature heat sensor with short circuit isolator 199ac/01(B501AP, B524HTR and B524RTE bases)52051HTEIAnalogue addressable class BS fixed temperature heat sensor with short circuit isolator 199ac/02(B501AP, B524HTR and B524RTE bases)52051REIAnalogue addressable class A1R rate of rise heat sensor with short circuit isolator 199ac/03(B501AP, B524HTR and B524RTE bases)ECO1005Class A1R conventional thermal detector (ECO1000B, ECO1000BSD, ECO1000BR, 199n/01ECO1000BRSD, ECO1000BR680, ECO1000BR680SD, ECO1000BR1000,ECO1000BR1000SD, ECO1000DB, ECO1000DBR and ECO1000DBRSD bases)ECO1005TClass A2S conventional fixed temperature heat detector (ECO1000B, ECO1000BSD, 199n/06ECO1000BR, ECO1000BRSD, ECO1000BR680, ECO1000BR680SD,ECO1000BR1000, ECO1000BR1000SD, ECO1000DB, ECO1000DBR andECO1000DBRSD bases)5351EClass A1R conventional rate of rise heat detector (B401, B401DG, B401R, B401SD, & 199n/07B401RSD bases)4351EClass BS conventional heat detector (B401, B401199n/08DG, B401R, B401SD, & B401RSD bases)ECO1004TClass BS conventional high temperature heat detector (ECO1000DB, ECO1000DBR, 199n/09ECO1000DBRSD, ECO1000B, ECO1000BSD, ECO1000BR, ECO1000BRSD,ECO1000BR680, ECO1000BR680SD, ECO1000BR1000 & ECO1000BR1000SD bases)Vision 2020FClass A2S conventional fixed temperature heat detector (2020B, 2020DB, 2020BSD, 199n/102020DBSD bases)Vision 2020HFClass BS conventional fixed temperature heat detector (2020B, 2020DB, 2020BSD, 199n/112020DBSD bases)Vision 2020RClass A1R conventional rate of rise heat detector (2020B, 2020DB, 2020BSD,199n/122020DBSD bases)5451EIS Intrinsically safe conventional A1R heat detector (B401 base) 199n/135351TEConventional class A2S fixed temperature heat detector199n/14(B401, B401R, B401RSD, B401SD, B401DG bases)52051REAnalogue addressable class A1R rate of rise heat detector (B501AP, B501, B524IEFT-1, 199n/15B524HTR and B524RTE bases)52051HTE Analogue addressable class BS fixed temperature heat detector (B501AP, B501,199n/16B524IEFT-1, B524HTR and B524RTE bases)52051E Analogue addressable class A1S fixed temperature heat detector (B501AP, B501,B524IEFT-1, B524HTR and B524RTE bases)199n/17Bases:2020B standard base2020DB deep base2020BSD standard base with schottky diode2020DBSD deep base with schottky diodeB401 standard baseB401DG deep baseB401R standard base with 470 ohm resistorB401SD standard base with schottky diodeB401RSD standard base with 470 ohm resistor and schottky diodeB401R1000 standard base with 1000 ohm resistorB401DGR deep base with 470 ohm resistorB401DGR1000 deep base with 1000 ohm resistorB401DGSD deep base with schottky diodeB501 standard analogue detector baseB501AP intelligent detector baseB501DG analogue sensor deep baseB524IEFT analogue sensor isolator baseB524IEFT-1 analogue short circuit isolator baseB524HTR heater baseB524RTE latching relay baseECO1000B standard base.ECO1000BSD standard base with schottky diode.ECO1000BR standard base, 470 ohm resistor.ECO1000BRSD standard base, 470 ohm resistor and schottky diode.ECO1000BR680 standard base, 680 ohm resistor.18 Jan 2014 263

PART 1: SECTION 4.1COMMERCIAL DETECTORSECO1000BR680SD standard base, 680 ohm resistor and schottky diode.ECO1000BR1000 standard base, 1000 ohm resistor.ECO1000BR1000SD standard base, 1000 ohm resistor and schottky diode.ECO2000B mounting base.ECO1000DB deep base.ECO1000DBR deep base with 470 ohm resistorECO1000DBRSD deep base with 470 ohm resistor and schottky diode.Certificate No: 199p to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 & CEA 4021: 2003Certificate No: 199t to LPS 1279 - 1.0: 2006, EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A1: 2006 & CEA 4021: 2003Certificate No: 199aa to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002, CEA 4021: 2003 & EN 54-17: 2005Multi-criteria DetectorsCertificated ProductsLPCB Ref.No.199aa/0122051TLEIAnalogue addressable photo-thermal-IR multi-criteria smoke sensor with short circuitisolator (B501AP, B524HTR & B524RTE bases)Note: Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1R22051TEIAnalogue addressable photo-thermal multi-criteria smoke sensor199aa/02with short circuit isolator (B501AP, B524HTR & B524RTE bases)Note: Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1RECO1002Conventional photo-thermal detector (ECO1000B, ECO1000BSD, ECO1000BR,199p/01ECO1000BRSD, ECO1000BR680, ECO1000BR680SD, ECO1000BR1000,ECO1000BR1000SD, ECO1000DB, ECO1000DBR and ECO1000DBRSD bases)Note :Meets the requirements of EN54:5-2000 at class A1R and EN54:7:2000 at pre-setsensitivity2351TEMConventional optical/thermal detector (B401, B401DG, B401R, B401SD, & B401RSD 199p/03bases)Note: Meets the requirements of EN54-5:2000 at class A1R and EN54-7:2000 at 'High''Medium' and 'Low' sensitivity settings.Vision 2020PT Conventional photo thermal detector (2020B, 2020DB, 2020BSD and 2020DBSD bases) 199p/0422051TLE22051TE2251CTLE-xx-yyAnalogue addressable photo-thermal-IR multi-criteria sensor (B501AP, B501, B524IEFT-1, B524HTR and B524RTE bases)Note: Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1RAnalogue addressable photo-thermal multi-criteria sensor(B501AP, B501, B524IEFT-1, B524HTR and B524RTE bases)Note: Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1RAnalogue addressable multi-criteria fire detector incorporating CO, photoelectric, thermaland IR sensors (B501, B501AP, B501DG, B524IEFT-1, B524HTR and B524RTE bases)Notes:1.) xx = (Range 0-99) ~ indicates the communication software protocol2.) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White3.) Certified at the following settings: -Normal Mode:Alarm Levels 1 to 5 (Multi-criteria) EN54-5 Class A1R, EN54-7, LPS1279 and CEA 4021Alarm Level 6 (Heat Only Mode): EN54-5 Class A1RNuisance Environment Applications:Application 0, Alarm Level 4 EN54-7, LPS1279 & CEA 4021Application 1, Alarm Level 5 EN54-5 Class A1R, EN54-7 & CEA 4021Application 2, Alarm Level 4 or 5 EN54-5 Class A1R, EN54-7 & CEA 4021Application 3, Alarm Level 5 EN54-5 Class A1R, EN54-7 & CEA 4021Application 4, Alarm Level 5 EN54-5 Class A1R, EN54-7 & CEA 4021Application 5, Alarm Level 5 EN54-7 & CEA 4021Application 6, Alarm Level 5 EN54-5 Class A1R, EN54-7 & CEA 4021Application 7, Alarm Level 5 EN54-5 Class A1R, LPS1279 and CEA 4021199p/06199p/07199t/01Bases:2020B standard base2020DB deep base264 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORS2020BSD standard base with schottky diode2020DBSD deep base with schottky diodeB401 standard baseB401DG deep baseB401R standard base with 470 ohm resistorB401SD standard base with schottky diodeB401RSD standard base with 470 ohm resistor and schottky diodeB401R1000 standard base with 1000 ohm resistorB401DGR deep base with 470 ohm resistorB401DGR1000 deep base with 1000 ohm resistorB401DGSD deep base with schottky diodeB501 standard analogue detector baseB501AP intelligent detector baseB501DG analogue sensor deep baseB524IEFT analogue sensor isolator baseB524IEFT-1 analogue short circuit isolator baseB524HTR heater baseB524RTE latching relay baseECO1000B standard baseECO1000BSD standard base with schottky diodeECO1000BR standard base, 470 ohm resistorECO1000BRSD standard base, 470 ohm resistor and schottky diodeECO1000BR680 standard base, 680 ohm resistorECO1000BR680SD standard base, 680 ohm resistor and schottky diodeECO1000BR1000 standard base, 1000 ohm resistorECO1000BR1000SD standard base, 1000 ohm resistor and schottky diodeECO1000DB deep baseECO1000DBR deep base with 470 ohm resistorECO1000DBRSD deep base with 470 ohm resistor and schottky diodeECO2000B mounting baseCertificate No: 199u to EN 54-12: 2002Certificate No: 199w to EN 54-12: 2002 & EN 54-17: 2005Beam DetectorsCertificated ProductsLPCB Ref.No.6500R Conventional optical beam detector 199u/01Note: meets the requirements of EN 54-12: 2002at sensitivity levels 1,2,3,4 & Acclimate levels 1 & 26500RS Conventional optical beam detector with self test facility 199u/02Note: meets the requirements of EN 54-12: 2002at sensitivity levels 1,2,3,4 & Acclimate levels 1 & 26500-yy Analogue optical beam detector with short circuit isolator feature 199w/01Note:1. Meets the requirements of BS EN 54-12: 2002 at sensitivity levels 1,2,3,4 andAcclimate levels 1 & 22. yy = (Range 00-99) and indicates the software protocol6500S-yy Analogue optical beam detector with self test facility and short circuit isolator feature 199w/02Note:1. Meets the requirements of BS EN 54-12: 2002 at sensitivity levels 1,2,3,4 andAcclimate levels 1 & 22. yy = (Range 00-99) and indicates the software protocolAncillaries:RTS151-KEYRemote test Station6500 - LRK/BEAMLRK Long Range Kit6500 - MMK/BEAMMMK Multi-Mounting Kit6500 - SMK/BEAMSMK Surface Mounting KitCertificate No: 199ad to EN54-20: 2006Certificate No: 199ae to EN54-17: 2005 and EN54-20: 2006Aspirating Smoke DetectorsCertificated ProductsLPCB Ref.No.FL0111E Analogue addressable stand alone single channel aspirating detector 199ad/01Notes:1. For compliance with Clause 5.10 of EN54-20: 2006, the detector must be supplied by18 Jan 2014 265

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLPCB Ref.No.a power supply complying with EN54-4.2. The approval of the detector is conditional upon the following requirements: Systemdesign, installation and commissioning shall be performed in accordance with the FAASTAdvanced set-up and control guide (I56-3888-000).3. The device is only approved at sensitivity Level 1 (0.07%/m) meeting Classes A, Band C. The Class of any pipe/hole configuration and detector sensitivity must bedetermined using PipeIQLT software (version 1.2.9).FL0112E Analogue addressable stand alone single channel aspirating detector dual sensors 199ad/02Notes:1. For compliance with Clause 5.10 of EN54-20: 2006, the detector must be supplied bya power supply complying with EN54-4.2. The approval of the detector is conditional upon the following requirements: Systemdesign, installation and commissioning shall be performed in accordance with the FAASTAdvanced set-up and control guide (I56-3888-000).3. The device is only approved at sensitivity Level 1 (0.07%/m) meeting Classes A, Band C. The Class of any pipe/hole configuration and detector sensitivity must bedetermined using PipeIQLT software (version 1.2.9).FL0122E Analogue addressable stand alone dual channel aspirating detector dual sensors 199ad/03Notes:1. For compliance with Clause 5.10 of EN54-20: 2006, the detector must be supplied bya power supply complying with EN54-4.2. The approval of the detector is conditional upon the following requirements: Systemdesign, installation and commissioning shall be performed in accordance with the FAASTAdvanced set-up and control guide (I56-3888-000).3. The device is only approved at sensitivity Level 1 (0.07%/m) meeting Classes A, Band C. The Class of any pipe/hole configuration and detector sensitivity must bedetermined using PipeIQLT software (version 1.2.9).FL2011EI Analogue addressable single channel loop-based aspirating detector (B501AP base) 199ae/01Notes:1. For compliance with Clause 5.10 of EN54-20: 2006, the detector must be supplied bya power supply complying with EN54-4.2. The approval of the detector is conditional upon the following requirements: Systemdesign, installation and commissioning shall be performed in accordance with the FAASTAdvanced set-up and control guide (I56-3888-000).3. The device is only approved at sensitivity Level 1 (0.07%/m) meeting Classes A, Band C. The Class of any pipe/hole configuration and detector sensitivity must bedetermined using PipeIQLT software (version 1.2.9).FL2012EIAnalogue addressable single channel loop-based aspirating detector dual sensors 199ae/02(B501AP base)Notes:1. For compliance with Clause 5.10 of EN54-20: 2006, the detector must be supplied bya power supply complying with EN54-4.2. The approval of the detector is conditional upon the following requirements: Systemdesign, installation and commissioning shall be performed in accordance with the FAASTAdvanced set-up and control guide (I56-3888-000).3. The device is only approved at sensitivity Level 1 (0.07%/m) meeting Classes A, Band C. The Class of any pipe/hole configuration and detector sensitivity must bedetermined using PipeIQLT software (version 1.2.9).FL2022EIAnalogue addressable dual channel loop-based aspirating detector dual sensors199ae/03(B501AP base)Notes:1. For compliance with Clause 5.10 of EN54-20: 2006, the detector must be supplied bya power supply complying with EN54-4.2. The approval of the detector is conditional upon the following requirements: Systemdesign, installation and commissioning shall be performed in accordance with the FAASTAdvanced set-up and control guide (I56-3888-000).3. The device is only approved at sensitivity Level 1 (0.07%/m) meeting Classes A, Band C. The Class of any pipe/hole configuration and detector sensitivity must bedetermined using PipeIQLT software (version 1.2.9).Base:B501APintelligent sensor base266 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSPlana FabregaC/Caracas, 08030, Barcelona, SpainTel: 0034 93 243 1111 • Fax: 0034 93 243 0350E-mail: jgarcia@planafabrega.com; rseome@planafabrega.comCertificate No: 199m to EN 54-7: 2000 + A1: 2002Smoke DetectorsCertificated ProductsOPT1Conventional photoelectric smoke detector(ECO1000B, ECO1000BSD, ECO1000BR, ECO1000BRSD, ECO1000BR680,ECO1000BR680SD, ECO1000BR1000, ECO1000BR1000SD, ECO1000DB,ECO1000DBR, ECO1000DBRSD bases)LPCB Ref.No.199m/01Bases:ECO1000B standard baseECO1000BSD standard base with schottky diodeECO1000BR standard base, 470 ohm resistorECO1000BRSD standard base, 470 ohm resistor and schottky diodeECO1000BR680 standard base, 680 ohm resistorECO1000BR680SD standard base, 680 ohm resistor and schottky diodeECO1000BR1000 standard base, 1000 ohm resistorECO1000BR1000SD standard base, 1000 ohm resistor and schottky diodeECO1000DB deep baseECO1000DBR deep base with 470 ohm resistorECO1000DBRSD deep base with 470 ohm resistor and schottky diodeCertificate No: 199n to EN 54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsTEVOLConventional photoelectric smoke detector(ECO1000B, ECO1000BSD, ECO1000BR, ECO1000BRSD, ECO1000BR680,ECO1000BR680SD, ECO1000BR1000, ECO1000BR1000SD, ECO1000DB,ECO1000DBR, ECO1000DBRSD bases)LPCB Ref.No.199n/01Bases:ECO1000B standard baseECO1000BSD standard base with schottky diodeECO1000BR standard base, 470 ohm resistorECO1000BRSD standard base, 470 ohm resistor and schottky diodeECO1000BR680 standard base, 680 ohm resistorECO1000BR680SD standard base, 680 ohm resistor and schottky diodeECO1000BR1000 standard base, 1000 ohm resistorECO1000BR1000SD standard base, 1000 ohm resistor and schottky diodeECO1000DB deep baseECO1000DBR deep base with 470 ohm resistorECO1000DBRSD deep base with 470 ohm resistor and schottky diodeProtec Fire Detection plcProtec House, Churchill Way, Nelson, Lancashire BB9 6RT, United KingdomTel: +44 (0)1282 717171 • Fax: +44 (0)1282 717273E-mail: sales@protec.co.uk • Website: www.protec.co.ukCertificate No: 201f to EN 54-7: 2000Certificate No: 201p to EN 54-7: 2000Certificate No: 201ab to EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005Certificate No: 201v to EN 54-7: 2000 + A1: 2002 + A2: 200618 Jan 2014 267

PART 1: SECTION 4.1COMMERCIAL DETECTORSPoint Smoke DetectorsCertificated ProductsLPCB Ref.No.201ab/016000PLUS/OP/SAnalogue addressable smoke detector with indoor sounder and short circuit isolator(6000PLUS/BASE, 6000PLUS/FFBASE, N28-075-01 and N28-075-02 bases)Notes:1) Meets the requirements of EN 54-7: 2000 at the medium sensitivity setting2) Meets the requirements of EN 54-3: 2001 with the following tones:i) Continuous, 990Hzii) Warble, 990Hz for 250ms and 730Hz for 250ms6000PLUS/OP/SXAnalogue addressable smoke detector with indoor sounder and short circuit isolator 201ab/02(export) (6000PLUS/BASE, 6000PLUS/FFBASE, N28-075-01 and N28-075-02 bases)Notes:1) Meets the requirements of EN 54-7: 2000 at the medium sensitivity setting2) Meets the requirements of EN 54-3: 2001 with the following tones:i) Continuous, 990Hzii) Warble, 990Hz for 250ms and 730Hz for 250msiii) Dutch Whoop, 500-1500Hz over 3s3000/ION Conventional ionisation smoke detector (3000/BASE) 201f/013000/OP Mk II Conventional optical smoke detector (3000/BASE) 201f/046000/OP MK II Analogue addressable optical smoke detector (6000/BASE and 6000/DIB bases) 201p/01Note: Meets requirements of EN 54-7: 2000 at the following mode settings:i. Normal sensitivity mode6000PLUS/OPBases:6000/BASE standard low profile base6000/DIB isolator base3000/BASE Standard Base6000PLUS/BASE, standard mounting base6000PLUS/FFBASE, recessed mounting baseN28-075-01, Plug and Play Fast Fix baseN28-075-02, Plug and Play Surface baseAnalogue addressable smoke detector(6000PLUS/BASE, 6000PLUS/FFBASE, N28-075-01 and N28-075-02 bases)Notes: Meets the requirements of EN 54-7: 2000 at the medium sensitivity setting201v/01Certificate No: 201g to EN 54-5: 2000 + A1: 2002Certificate No: 201r to EN 54-5: 2000Certificate No: 201w to EN 54-5: 2000 + A1: 2002Certificate No: 201aa to EN 54-5: 2000 + A1: 2002, EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005Point Heat DetectorsCertificated ProductsLPCB Ref.No.201aa/016000PLUS/HT/SAnalogue addressable heat detector with indoor sounder and short circuit isolator(6000PLUSBASE, 6000PLUS/FFBASE, N28-075-01 and N28-075-02 bases)Notes:1) Meets the requirements of EN 54-5: 2000 at Class A1 and Class A22) Meets the requirements of EN 54-3: 2001 with the following tones:i) Continuous, 990Hzii) Warble, 990Hz for 250ms and 730Hz for 250ms6000PLUS/HT/SLAnalogue addressable heat detector with indoor sounder, short circuit isolator and 201aa/02beacon (6000PLUSBASE, 6000PLUS/FFBASE, N28-075-01 and N28-075-02 bases)Notes:1) Meets the requirements of EN 54-5: 2000 at Class A1 and Class A22) Meets the requirements of EN 54-3: 2001 with the following tones:i) Continuous, 990Hzii) Warble, 990Hz for 250ms and 730Hz for 250ms3) The beacon functionality is not included within the scope of this approval6000PLUS/HT/TSLAnalogue addressable heat detector with talking indoor sounder, short circuit isolator and 201aa/03beacon (6000PLUSBASE, 6000PLUS/FFBASE, N28-075-01 and N28-075-02 bases)Notes:1) Meets the requirements of EN 54-5: 2000 at Class A1 and Class A22) Meets the requirements of EN 54-3: 2001 with the following tones:i) Continuous 990Hzii) Warble, 990Hz for 250ms and 730Hz for 250msiii) Bell, 800Hziv) Voice message, F_EVAC2: Female voice “evacuation message” V2,“Attention, attention. This is an emergency. Please leave the building by the nearestavailable exit”.3) The beacon functionality is not included within the scope of this approval3000/TEMP56 Conventional class A1 rate of rise and fixed temperature heat detector (3000/BASE) 201g/01268 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLPCB Ref.No.3000/TEMP64 Conventional class A2 rate of rise fixed temperature (3000/BASE) 201g/026000/TEMP Analogue addressable heat detector (6000/BASE & 6000/DIB bases) 201r/01Note: Meets requirements of EN 54-5: 2000 at Class A1 (High sensitivity) and A2(Normal sensitivity).6000PLUS/HTAnalogue addressable heat detector (6000PLUS/BASE, 6000PLUS/FFBASE, N28-075- 201w/0101 and N28-075-02 bases)Note: Meets the requirements of EN 54-5: 2000 at Class A1 and Class A2Bases:3000/BASE standard base6000/BASE standard low profile base6000/DIB isolator base6000PLUS/BASE, standard mounting base6000PLUS/FFBASE, recessed mounting baseN28-075-01, Plug and Play Fast Fix baseN28-075-02, Plug and Play Surface baseCertificate No: 201j to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002, CEA 4021: 2003Certificate No: 201q to EN 54-5: 2000, EN 54-7: 2000 and CEA 4021Certificate No: 201s to EN 54-5: 2000, EN 54-7: 2000 and CEA 4021Certificate No: 201u to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, CEA4021: 2003Certificate No: 201x to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, CEA4021: 2003, EN 54-3: 2001 + A1: 2002+ A2: 2006 and EN 54-17: 2005Certificate No: 201y to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005, CEA4021: 2003Certificate No: 201z to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, CEA4021: 2003, EN 54-3: 2001 + A1: 2002+ A2: 2006 and EN 54-17: 2005Certificate No: 201ac to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005, CEA4021: 2003Multi-criteria DetectorsCertificated ProductsLPCB Ref.No.6000PLUS/OPHT/IAnalogue addressable multisensor detector with short circuit isolator (6000PLUS/BASE, 201ac/016000PLUS/FFBASE, N28-075-01 and N28-075-02 bases)Notes:1) Meets the requirements of EN 54-5: 2000 at Class A22) Meets the requirements of EN 54-7: 2000 at the medium and low sensitivity settings3000/OPHT Mk II Conventional optical smoke and Class A2 heat detector (3000/BASE) 201j/016000/OPHT Mk IIAnalogue addressable optical smoke and Class A2 heat multisensor detector201q/01(6000/BASE & 6000/DIB bases).Note:1) Meets requirements of EN 54-7: 2000 and CEA 4021 at the following modesettings only:i) Normal sensitivity modeii) Low sensitivity mode6000/OPHTCOAnalogue addressable optical smoke, CO and Class A2 heat multisensor detector 201s/01(6000/BASE & 6000/DIB bases)Notes:1) Meets requirements of EN 54-7: 2000 and CEA 4021 at the following modesettings only:i) Normal sensitivity modeII) Low sensitivity mode2) The CO element is not LPCB approved6000PLUS/OPHTAnalogue addressable multisensor detector (6000PLUS/BASE, 6000PLUS/FFBASE, 201u/01N28-075-01 and N28-075-02 bases)Notes:1) Meets the requirements of EN 54-5: 2000 at Class A22) Meets the requirements of EN 54-7: 2000 at the medium and low sensitivity settings6000PLUS/OPHT/S Analogue addressable multisensor detector with indoor sounder and short circuit isolator 201x/01(6000PLUSBASE, 6000PLUS/FFBASE, N28-075-01 and N28-075-02 bases)Notes:1) Meets the requirements of EN 54-5: 2000 at Class A22) Meets the requirements of EN 54-7: 2000 at the medium and low sensitivity settings3) Meets the requirements of EN 54-3: 2001 with the following tones:i) Continuous, 990Hzii) Warble, 990Hz for 250ms and 730Hz for 250ms6000PLUS/OPHT/SX Analogue addressable multisensor detector with indoor sounder and short circuit isolator 201x/02(export) (6000PLUSBASE, 6000PLUS/FFBASE, N28-075-01 and N28-075-02 bases)Notes:1) Meets the requirements of EN 54-5: 2000 at Class A22) Meets the requirements of EN 54-7: 2000 at the medium and low sensitivity settings18 Jan 2014 269

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated Products6000PLUS/OPHT/SL6000PLUS/OPHT/TS6000PLUS/OPHT/TSX6000PLUS/OPHT/TSL6000PLUS/OPHTCO6000PLUS/OPHTCO/S6000PLUS/OPHTCO/SX3) Meets the requirements of EN 54-3: 2001 with the following tones:i) Continuous, 990Hzii) Warble, 990Hz for 250ms and 730Hz for 250msiii) Dutch Whoop, 500-1500Hz over 3sAnalogue addressable multisensor detector with indoor sounder, short circuit isolator andbeacon (6000PLUSBASE, 6000PLUS/FFBASE, N28-075-01 and N28-075-02 bases)Notes:1) Meets the requirements of EN 54-5: 2000 at Class A22) Meets the requirements of EN 54-7: 2000 at the medium and low sensitivity settings3) Meets the requirements of EN 54-3: 2001 with the following tones:i) Continuous 990Hzii) Warble, 990Hz for 250ms and 730Hz for 250ms4) The beacon functionality is not included within the scope of this approvalAnalogue addressable multisensor detector with talking indoor sounder and short circuitisolator (6000PLUSBASE, 6000PLUS/FFBASE, N28-075-01 and N28-075-02 bases)Notes:1) Meets the requirements of EN 54-5: 2000 at Class A22) Meets the requirements of EN 54-7: 2000 at the medium and low sensitivity settings3) Meets the requirements of EN 54-3: 2001 with the following tones:i) Continuous, 990Hzii) Warble, 990Hz for 250ms and 730Hz for 250msiii) Bell, 800Hziv) Voice Message, F_EVAC2: Female voice evacuation message V2,Attention, attention. This is an emergency. Please leave the building by the nearestavailable exit.Analogue addressable multisensor detector with talking indoor sounder and short circuitisolator (export) (6000PLUSBASE, 6000PLUS/FFBASE, N28-075-01 and N28-075-02bases)Notes:1) Meets the requirements of EN 54-5: 2000 at Class A22) Meets the requirements of EN 54-7: 2000 at the medium and low sensitivity settings3) Meets the requirements of EN 54-3: 2001 with the following tones:i) Continuous, 990Hzii) Warble, 990Hz for 250ms and 730Hz for 250msiii) Dutch Whoop, 500-1500Hz over 3siv) Bell, 800HzAnalogue addressable multisensor detector with talking indoor sounder, short circuitisolator and beacon (6000PLUSBASE, 6000PLUS/FFBASE, N28-075-01 and N28-075-02 bases)Notes:1) Meets the requirements of EN 54-5: 2000 at Class A22) Meets the requirements of EN 54-7: 2000 at the medium and low sensitivity settings3) Meets the requirements of EN 54-3: 2001 with the following tones:i) Continuous, 990Hzii) Warble, 990Hz for 250ms and 730Hz for 250msiii) Bell, 800Hziv) Voice message, F_EVAC2: Female voice evacuation message V2,Attention, attention. This is an emergency. Please leave the building by the nearestavailable exit.4) The beacon functionality is not included within the scope of this approvalAnalogue addressable multisensor and CO detector with short circuit isolator(6000PLUS/BASE, 6000PLUS/FFBASE, N28-075-01 and N28-075-02 bases)Notes:1) Meets the requirements of EN 54-5: 2000 at Class A22) Meets the requirements of EN 54-7: 2000 at the medium and low sensitivity settings3) The CO functionality is not included within the scope of this approvalAnalogue addressable multisensor and CO detector with indoor sounder and short circuitisolator (6000PLUSBASE, 6000PLUS/FFBASE, N28-075-01 and N28-075-02 bases)Notes:1) Meets the requirements of EN 54-5: 2000 at Class A22) Meets the requirements of EN 54-7: 2000 at the medium and low sensitivity settings3) Meets the requirements of EN 54-3: 2001 with the following tones:i) Continuous, 990Hzii) Warble, 990Hz for 250ms and 730Hz for 250ms4) The CO functionality is not included within the scope of this approvalAnalogue addressable multisensor and CO detector with indoor sounder and short circuitisolator (export) (6000PLUSBASE, 6000PLUS/FFBASE, N28-075-01 and N28-075-02bases)Notes:1) Meets the requirements of EN 54-5: 2000 at Class A22) Meets rhe requirements of EN 54-7: 2000 at the medium and low sensitivity settings3) Meets the requirements of EN 54-3: 2001 with the following tones:LPCB Ref.No.201x/03201x/04201x/05201x/06201y/01201z/01201z/02270 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated Products6000PLUS/OPHTCO/SL6000PLUS/OPHTCO/TSL6000PLUS/OPHTCO/TSLXi) Continuous, 990Hzii) Warble, 990Hz for 250ms and 730Hz for 250msiii) Dutch Whoop, 500-1500Hz over 3s4) The CO functionality is not included within the scope of this approvalAnalogue addressable multisensor and CO detector with indoor sounder, short circuitisolator and beacon (6000PLUSBASE, 6000PLUS/FFBASE, N28-075-01 and N28-075-02 bases)Notes:1) Meets the requirements of EN 54-5: 2000 at Class A22) Meets the requirements of EN 54-7: 2000 at the medium and low sensitivity settings3) Meets the requirements of EN 54-3: 2001 with the following tones:i) Continuous 990Hzii) Warble, 990Hz for 250ms and 730Hz for 250ms4) The CO and beacon functionality are not included within the scope of this approvalAnalogue addressable multisensor and CO detector with talking indoor sounder shortcircuit isolator and beacon (6000PLUSBASE, 6000PLUS/FFBASE, N28-075-01 and N28-075-02 bases)Notes:1) Meets the requirements of EN 54-5: 2000 at Class A22) Meets the requirements of EN 54-7: 2000 at the medium and low sensitivity settings3) Meets the requirements of EN 54-3: 2001 with the following tones:i) Continuous, 990Hzii) Warble, 990Hz for 250ms and 730Hz for 250msiii) Bell, 800Hziv) Voice message, F_EVAC2: Female voice evacuation message V2,Attention, attention. This is an emergency. Please leave the building by the nearestavailable exit.4) The CO and beacon functionality are not included within the scope of this approvalAnalogue addressable multisensor and CO detector with talking indoor sounder, shortcircuit isolator and beacon (export) (6000PLUSBASE, 6000PLUS/FFBASE, N28-075-01and N28-075-02 bases)Notes:1) Meets the requirements of EN 54-5: 2000 at Class A22) Meets the requirements of EN 54-7: 2000 at the medium and low sensitivity settings3) Meets the requirements of EN 54-3: 2001 with the following tones:i) Continuous, 990Hzii) Warble, 990Hz for 250ms and 730Hz for 250msiii) Dutch Whoop, 500-1500Hz over 3siv) Bell, 800Hz4) The CO and beacon functionality are not included within the scope of this approvalLPCB Ref.No.201z/03201z/04201z/05Bases:3000/BASE standard base6000/BASE standard low profile base6000/DIB isolator base6000PLUS/BASE, standard mounting base6000PLUS/FFBASE, recessed mounting baseN28-075-01, Plug and Play Fast Fix baseN28-075-02, Plug and Play Surface baseRavel Electronics LtdUnit 11, Chancel Industrial Estate, Newhall Street, Willenhall WV13 1NX, United KingdomTel: 0845 835 8855E-mail: exportsales@ravelfire.co.ukCertificate No: 512a-(cl-7) to EN54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated ProductsRE-336SConventional 2 wire photoelectric smoke detector with remote LED output (RE-334Bbase)LPCB Ref.No.512a/02BaseRE-334B 4-wire detector base18 Jan 2014 271

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificate No: 512b-(cl-4) to EN54-5: 2000 + A1: 2002, EN54-7: 2000 + A1: 2002 + A2: 2006 & CEA4021: 2003Multi-Sensor/Multi-Criteria DetectorsCertificated ProductsRE-336SHConventional 2 wire photoelectric smoke and heat detector with remote LED output (RE-334B base)LPCB Ref.No.512b/02BaseRE-334B4-wire detector baseCertificate No: 512d-(cl-7) to EN54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsRE-336HConventional 2 wire 24VDC class A2R fixed temperature and rate-of-rise heat detectorwith LED output (RE-332B base)LPCB Ref.No.512d/04BaseRE-332B2-wire detector baseSafety Hi-Tech SrlVia Cavour, 96 - 67051 Avezzano (AQ), ItalyTel: +39 0863 1940720 • Fax: +39 0863 1940724E-mail: mail@safetyhitech.com • Website: www.safetyhitech.comCertificate No: 010p-(cl-3) to EN 54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsLPCB Ref.No.SHD90003 Venator-DE Heat Detectorand SHB90002 mounting base) 010p/05Note: 1. Meets the requirements of EN54: Part 5 - Class A1RSHD90004 Venator-DE Heat Detectorand SHB90002 mounting base) 010p/14Note: 1. Meets the requirements of EN54: Part 5 - Class CSBase:SHB90001 Venator-DE standard mounting baseSHB90002 Venator-DE standard relay mounting baseCertificate No: 010q-(cl-3) to EN 54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated ProductsLPCB Ref.No.SHD90001 Venator-DE Ionisation Smoke Detectorand SHB90002 mounting base) 010q/05SHD90002 Venator -DE Optical Smoke Detectorand SHB90002 mounting base) 010q/11Base:SHB90001 Venator-DE standard mounting baseSHB90002 Venator-DE standard relay mounting base272 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSSafex Fire Services Limited202 Dhanraj Industrial Estate, Sun Mill Road, Lower Parel West, Mumbai-400 013, IndiaTel: +91-22-24938108 • Fax: +91-22-24950224E-mail: ho@safexfire.com • Website: www.safexfire.comCertificate No: 506a-(cl-2) to EN 54-7 : 2000 + A1: 2002 + A2: 2006Point Smoke DetectorsCertificated ProductsLPCB Ref.No.SF-871 Conventional photoelectric smoke detector (AHMB-L Base) 506a/01BasesAHMB-L mounting baseCertificate No: 506b-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006 ,EN 54-5: 2000 + A1: 2002 , CEA 4021: 2003Multi-Criteria DetectorsCertificated ProductsLPCB Ref.No.SF-0315-2 (2 Wire) Optical smoke and class A2 heat detector (AHMB-031 Base) 506b/01SF-0315-3 (3 Wire) Optical smoke and class A2 heat detector (AHMB-031 Base) 506b/02SF-0315-4 (4 Wire) Optical smoke and class A2 heat detector (AHMB-031 Base) 506b/03BasesAHMB-031 mounting baseSareme UABNaugarduko str. 32/2, Vilnius LT2006, LithuaniaTel: +3705 2135047 • Fax: +3705 2333567E-mail: valdemar@sareme.ltCertificate No: 512d to EN 54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsEA323-2EA323-4Conventional 2 wire 24 VDC class A2S fixed temperature and rate-of-rise heat detector(P/N854001 base)Conventional 4 wire 12VDC class A2S fixed temperature and rate-of-rise heat detector(P/N854001 base)LPCB Ref.No.512d/01512d/05Bases:P/N854001 4-Wire detector baseCertificate No: 512a to EN 54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated ProductsLPCB Ref.No.EA-318-2 Conventional 2 wire photoelectric smoke detector (P/N852001 base) 512a/01EA-318-4-12 Conventional 4 wire photoelectric smoke detector (P/N854001 base) 512a/03Bases:P/N852001 2-wire detector baseP/N854001 4-wire detector base18 Jan 2014 273

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificate No: 512b to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 +A1: 2002 + A2: 2006 and CEA 4021: 2003Multi-Criteria DetectorsCertificated ProductsLPCB Ref.No.EA-318-2H Conventional 2 wire photoelectric smoke and heat detector (P/N852001 base) 512b/01EA-318-2H-LEDConventional 2 wire photoelectric smoke and heat detector with remote LED output 512b/02(P/N854001 base)Bases:P/N854001 4-wire detector baseP/N852001 2-wire detector baseSchlumberger Oilfield UK PLC, Sensor Highway Limited (Schlumberger,Southampton)Unit 7, The Quadrangle, Abbey Park Industrial Estate, Romsey, Southampton, Hampshire SO51 9DL, UnitedKingdomTel: +44 (0)1794 529600 • Fax: +44 (0)1794 514931E-mail: PTravis@slb.com • Website: www.slb.comCertificate No: 648c to LPCB Test Schedule E120656/1.0Linear Heat Detection SystemCertificated ProductsSensa DTS240SCDistributed Temperature SensorSC: Single ChannelNotes:1. Approval is conditional on the following:LPCB Ref.No.648c/01Sensa DTS240TC- The use of SensorLine II or SensorTube II optical fibres (Stainless Steel).- The optical fibre lengths should not exceed 4km.- The system should be installed and configured in accordance with the manufacturersinstructions.- The zone/alarm configuration parameters should be set in accordance with themanufacturers instructionsfor an alarm response equivalent to Class A1R as specified in EN 54-5: 2000 + A1: 2002.2. The product is known as the LTS240SC when supplied in a wall-mount or rack-mounthousing.Distributed Temperature SensorTC: Twin ChannelNotes:1. Approval is conditional on the following:- The use of SensorLine II or SensorTube II optical fibres (Stainless Steel).- The optical fibre lengths should not exceed 4km.- The system should be installed and configured in accordance with the manufacturersinstructions.- The zone/alarm configuration parameters should be set in accordance with themanufacturers instructionsfor an alarm response equivalent to Class A1R as specified in EN 54-5: 2000 + A1: 2002.2. The product is known as the LTS240TC when supplied in a wall-mount or rack-mounthousing.648c/01AnnexSensor Highway Ltd. is part of Schlumberger Oilfield UK PLC and known as Schlumberger, Southampton274 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSShenzhen Heiman Technology Co Ltd3rd Floor, No 5 Building, Longbi Industrial Estate, Jihua Road, Bantian, Shenzhen 518129, ChinaTel: +86 75584193930E-mail: office@heiman.com.cnCertificate No: 1138a to EN 54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated ProductsLPCB Ref.No.HM-612PC-4 Conventional 4-WIRE photoelectric smoke detector with relay output (B-01 base) 1138a/01HM-612PC-2 Conventional 2-WIRE photoelectric smoke detector with remote LED (B-01 base) 1138a/02HM-613PC-4 Conventional 4-WIRE photoelectric smoke detector with relay output (B-01 base) 1138a/03HM-613PC-2 Conventional 2-WIRE photoelectric smoke detector with remote LED (B-01 base) 1138a/04BaseB-01 Standard baseSHIELD FIRE, SAFETY AND SECURITY LTDRedburn House, 2a Tonbridge Road, Romford, Essex RM3 8QE, United KingdomTel: +44 207 712 1610 • Fax: +44 207 712 1578E-mail: shielduk@shieldglobal.com • Website: www.shieldglobal.comCertificate No: 548k to EN 54-12: 2002Beam DetectorsCertificated ProductsLPCB Ref.No.D-A430/R Intelligent optical beam detector 548k/01Notes:1) Meets the requirements of EN 54-12 at the following sensitivity settings:Level 1 - 1.61 dBLevel 2 - 2.31dBCertificate No: 548d-(cl-4) to EN 54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated ProductsLPCB Ref.No.D-C401 Conventional photoelectric smoke detector (DZ-03 base) 548d/01D-A411 Intelligent photoelectric smoke detector (DZ-03 base) 548d/02Bases:DZ-03 Standard detector baseCertificate No: 548c-(cl-4) to EN 54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsLPCB Ref.No.D-C402 Conventional Class A1R heat detector (DZ-03 base) 548c/01D-A412 Intelligent Class A1R heat detector (DZ-03 base) 548c/02Bases:DZ-03 Standard detector base18 Jan 2014 275

PART 1: SECTION 4.1COMMERCIAL DETECTORSSiemens Switzerland Limited, Building Technologies DivisionInternational Headquarters, Gubelstrasse 22, CH-6301 Zug, SwitzerlandTel: +41 (0) 41 724 24 24 • Fax: +41 (0) 41 724 35 22Manufacturing at:Volketswil Factory, Industriestrasse 22, CH-8604 Volketswil, SwitzerlandTel: +41 1 922 6111 • Fax: +41 1 922 6450UK Sales:Siemens Building Technologies Limited, FSP DivisionTel: +44 (0)1784 461616 • Fax: +44 (0)1784 464646Certificate No: 126x-(cl-1) to EN 54:7: 2000 + A1:2002 + A2:2006Certificate No: 126ab-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-17: 2005Certificate No: 126am-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006 & EN 54-17: 2005Certificate No: 531c-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006Certificate No: 531d-(cl-1) to EN 54-7:2000 + A1:2002 + A2: 2006, EN 54-17: 2005 and CEA4021: 2003-07Certificate No: 531e-(cl-1) to EN 54-7: 2000 + A1: 2002 + A1: 2006 and EN 54-17: 2005Point Smoke DetectorsCertificated ProductsLPCB Ref.No.126ab/01FDO241Analogue addressable photoelectric smoke detector with short circuit isolator(FDB221, FDB201, FDB291 and FDB292 bases)FDO221Analogue addressable photoelectric smoke detector with short circuit isolator126ab/02(FDB221, FDB201, FDB291 and FDB292 bases)DO1131A Addressable photoelectric smoke detector with short circuit isolator (DB1131A base) 126am/03Note:1. Meets EN54-7: 2000 at Standard and High sensitivity settingsDO1152AAddressable photoelectric smoke detector with short circuit isolator126am/05(DB1151A base)Note:1. Meets EN54-7: 2000 at Personen/life and Immobilien/property sensitivity settingsDOT1131AAddressable photoelectric smoke detector with thermal enhancement and short circuit 126am/06isolator (DB1131A base)Note:1. Meets EN54-7: 2000 at Standard and High sensitivity settingsDOT1152AAddressable photoelectric smoke detector with thermal enhancement and short circuit 126am/09isolator (DB1151A base)Note:1. Meets EN54-7: 2000 at Personen/life and Immobilien/property sensitivity settingsR970 Scattered light smoke detector (Z94 base) 126x/01Note:1. Meets requirements of EN54-7 at standard (2.5%/m) and increased (1.7%/m)sensitivity settingDO1101AConventional photoelectric smoke detector126x/02(DB1101A base)DO1101A-ExIntrinsically safe conventional photoelectric smoke detector126x/03(DB1101A base)DO1151AAddressable photoelectric smoke detector126x/04(DB1151A base)Note:1. Meets EN54-7 at Personen/life sensitivity settingsDOT1151AAddressable photoelectric smoke detector with thermal enhancement126x/05(DB1151A base)Note:1. Meets EN54-7: 2000 at Personen/life and Immobilien/property sensitivity settingsDOT1151A-ExIntrinsically safe addressable photoelectric smoke detector with thermal enhancement 126x/06(DB1151A base)Note:1. Meets EN54-7: 2000 at Personen/life and Immobilien/property sensitivity settingsOH320C Conventional photoelectric smoke detector with thermal enhancement (SO320 base) 531c/02OP320C Conventional photoelectric smoke detector (SO320 base) 531c/04OH620 Analogue addressable photoelectric smoke detector with thermal enhancement 531c/05276 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLPCB Ref.No.(SO620 base)Note: Meets the requirements of EN54-7: 2000 at Standard and High sensitivity settingsOP620 Analogue addressable photoelectric smoke detector (SO620 base) 531c/06Note: Meets the requirements of EN54-7: 2000 at Standard and High sensitivity settingsOP820 Analogue addressable photoelectric smoke detector (SO820 base) 531c/07Note: Meets the requirements of EN54-7: 2000 at Personen/life and Immobilien/propertysensitivity settingsOH720Analogue addressable multi sensor smoke detector531d/01(DB720, DB721 bases)Note:1. Meets the requirements of EN 54-7 in the following sensitivities:1 - Robust 3.5%/m2 - Sensitive 2.5%/mOP720 Analogue addressable smoke detector with short circuit isolator (DB720, DB721 bases) 531e/01Note:1. Meets the requirements of EN 54-7 in the following sensitivities:1 - Standard 2.5%/m2 - Sensitive 1.8%/mOH320AAnalogue addressable photoelectric smoke detector with thermal enhancement and short 531e/02circuit isolator (SO320 base)Note:1. Meets EN54-7: 2000 at Standard and High sensitivity settingsOP320AAnalogue addressable photoelectric smoke detector with short circuit isolator531e/03(SO320 base)Note:1. Meets EN54-7: 2000 at Standard and High sensitivity settingsBases:Z94 baseFDB221 baseFDB201 base "Collective"FDB291 base attachment surfaceFDB292 base attachment surface wetDB720 Detector baseDB721 Detector base with loop contactDB1101A baseDB1131A baseDB1151A baseDBZ1191 base attachmentSO620 Analogue addressable (AnalogPLUS) detector baseSO820 Analogue addressable (Interactive) detector baseSO320 base for Synova TM 300 series detectorsCertificate No: 126aa-(cl-1) to EN 54-5: 2000 + A1: 2002 and EN 54-17: 2005Certificate No: 126an-(cl-1) to EN 54-5: 2000 + A1: 2002Certificate No: 531b-(cl-1) to EN 54-5: 2000 + A1: 2002Certificate No: 531f-(cl-1) to EN 54-5: 2000 + A1: 2002 and EN 54-17: 2005Certificate No: 126av-(cl-1) to EN 54-5: 2000 + A1: 2002 and EN 54-17: 2005Point Heat DetectorsCertificated ProductsLPCB Ref.No.126aa/01FDT241Analogue addressable rate of rise heat detector with short circuit isolator.(FDB221, FDB201, FDB291 and FDB292 bases)Note: Meets EN 54-5: 2000 at Class A1R, A1S, BR and BS.FDT221Analogue addressable rate of rise heat detector with short circuit isolator (FDB221, 126aa/02FDB201, FDB291 and FDB292 bases)Note: Meets EN 54-5: 2000 at Class A1R and BRDT1101A Conventional class A1R heat detector (DB1101A base) 126an/01DT1101A-Ex Conventional intrinsically safe class A1R heat detector (DB1101A base) 126an/02DT1102A Conventional class B heat detector (DB1101A base) 126an/03DT1102A-Ex Conventional intrinsically safe class B heat detector (DB1101A base) 126an/04DT1151A-Ex Analogue addressable intrinsically safe heat detector (DB1151A base) 126an/06Note: Meets EN54-5: 2000 at class A1R and class BDT1131ADT1152AAnalogue addressable class A1R heat detector with short circuit isolator(DB1131A base)Analogue addressable heat detector with short circuit isolator(DB1151A base)Note:1. Meets EN 54-5:2000 at class A1R and class BS126av/01126av/0218 Jan 2014 277

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLPCB Ref.No.HI320C Conventional class A1R heat detector (SO320 base) 531b/03HI322C Conventional class A2 heat detector (SO320 base) 531b/04HI620 Analogue addressable (AnalogPLUS) Class A1R heat detector (SO620 base) 531b/05HI820 Analogue addressable (Interactive) heat detector (SO820 base) 531b/06Note: Meets the requirements of EN54-5: 2000 at class A1R and class BRHI720Analogue addressable class A2S and A2R heat detector with short circuit isolator 531f/01(DB720, DB721 bases)Notes:1. Meets the requirements of EN 54-5 at classes A2S and A2RHI722Analogue addressable class A2S heat detector with short circuit isolator531f/02(DB720, DB721 bases)Notes:1. Meets the requirements of EN 54-5 at class A2SHI320A Analogue addressable class A1R heat detector with short circuit isolator (SO320 base) 531f/03HI322A Analogue addressable class A2 heat detector with short circuit isolator (SO320 base) 531f/04Bases:Z94 baseDFB1190 baseFDB221 baseFDB201 base “Collective”FDB291 base attachment surfaceFDB292 base attachment surface wetDB720 Detector baseDB721 Detector base with loop contactDB1101A base for conventional addressingDB1131A base for analogue addressingDB1151A base for interactive fire detectorsSO320 base for Synova TM 300 series detectorsSO620 Analogue addressable (AnalogPLUS) detector baseSO820 Analogue addressable (Interactive) detector baseCertificate No: 126ag-(cl-1) to EN 54-12: 2002 and EN 54-17: 2005Certificate No: 126ak-(cl-1) to EN 54-12: 2002 and EN 54-17: 2005Beam DetectorsCertificated ProductsLPCB Ref.No.FDL241-9 Analogue addressable beam detector with short circuit isolator (FDLB291 base) 126ag/01Note: Certified at sensitivity settings 30%, 50% and 65%DLO1191 Optical beam smoke detector with short circuit isolator (DLB1191A base) 126ak/01Note:1. Certified at sensitivity setting 30%, 50% and 65%Bases:FDLB291 baseDLB1191A baseCertificate No: 126s-(cl-1) to EN 54-10: 2002Certificate No: 126af-(cl-1) to EN 54-10: 2001 + A1: 2005 and EN 54-17: 2005Certificate No: 126ay-(cl-1) to EN 54-10: 2002 and EN 54-17: 2005Flame DetectorsCertificated ProductsLPCB Ref.No.FDF241-9 Analogue addressable infra red flame detector with short circuit isolator (FDFB291 base) 126af/01Note:1. Meets EN 54-10: 2002 at Class 1 and 2 onlyFDF221-9 Analogue addressable infra red flame detector with short circuit isolator (FDFB291 base) 126af/02Note:1. Meets EN 54-10: 2002 at Class 1 and 2 onlyDF1192DF1191Analogue addressable infra red flame detector with short circuit isolator(DFB1190 Base)Note:1. Certificated in increased & standard sensitivity settings - Class 1 and 2 respectively.Analogue addressable infra red flame detector with short circuit isolator(DFB1190 Base)Note:1. Certificated in increased & standard sensitivity settings - Class 1 and 2 respectively.126ay/01126ay/02278 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLPCB Ref.No.DF1151-ExAnalogue addressable IS infra red flame detector with short circuit isolator126ay/03(DFB1190 Base)Note:1. Certificated in increased & standard sensitivity settings - Class 1 and 2 respectively.DF1101-Ex Conventional I.S. infra red flame detector (DFB 1190 base) 126s/03Note:1. Certificated in "increased" & "standard" sensitivity settings - Class 1 and 2respectively.Bases:Z94 baseDFB 1190 baseFDFB291 baseCertificate No: 126ah-(cl-1) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, CEA4021: 2003 and EN 54-17: 2005Certificate No: 126ba-(cl-1) to EN 54-5: 2001 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005 and CEA 4021: 2003Multi-criteria DetectorsCertificated ProductsFDOOT241-9FDOOTC241Analogue addressable multisensor detector with short circuit isolator (FDB201, FDB202,FDB221, FDB222, FDB291 and FDB293 bases)Note:Meets the requirements of EN 54-5: 2000 atClass A2R & A2S and EN 54-7: 2000 at sensitivity settings:Parameter No. 1 UniversalParameter No. 2 Robust with thermal enhancementParameter No. 3 SensitiveParameter No. 4 Balanced with thermal enhancementParameter No. 5 Suppression with thermal enhancementParameter No. 6 Response with thermal enhancementParameter No. 7 Robust / BGD with thermal enhancementAnalogue addressable multisensor detector with short circuit isolator(FDB221, FDB222, FDSB291 & FDSB293 bases)Note - the following modes are approvedMode 0 - Neural Fire Detector:0.0) High Compensation0.2) Robust0.4) Balanced0.5) Suppression0.6) Fast Response0.7) High Compensation0.9) High Sensitive Fast0.10) Balanced CO0.12) Suppression COLPCB Ref.No.126ah/01126ah/03FDOOT241-A3Mode 1 - Heat Detector1.1) A1R1.2) BR1.3) A1S1.4) BSMode 2 - Smoke Detector2.0) Universal2.1) Universal2.2) Robust2.3) SensitiveMultisensor detector with short circuit isolator (FDB221, FDB222, DB1131A, FDB291,FDB293 and FDB241 bases)Notes: - the following modes are approved1 - Parameter sets for detection when connected to FDnet communication protocolMode 0 - Neural Fire Detector-Multisensor Detector:Parameter NoRobust 2Balanced 4Suppression 5Fast Response 6High Compensation 7126ah/0418 Jan 2014 279

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsFDOOT241-A9OOH740High Sensitive Fast 9Mode 1 - Heat Detector:Parameter NoA1R 1BR 2A1S 3BS 4Mode 2 - Smoke Detector:Parameter NoUniversal 1Robust 2Sensitive 32 - Parameter sets for detection when connected to AnalogPLUS communication protocolSmoke only as DO1131AParameter NoSensitive 3Universal Fast 4Smoke with heat enhancement as DOT1131AParameter NoFast Response 6Universal Fast 12Rate of Rise heat detection as DT1131AParameter NoA1R 1Fixed temperature heat detection as DT1132AParameter NoBS 4Multisensor detector with short circuit isolator (FDB221, FDB222, FDB201, FDB202,FDB299, FDB291, FDB293, DB1101A and SPF600 bases)Notes - the following modes are approved1 - Parameter sets for detection when connected to FDnet communication protocol andcollective detector lineMode 0 - Neural Fire Detector-Mutisensor Detector:Parameter NoRobust 2Balanced 4Suppression 5Fast Response 6High Compensation 7High Sensitive Fast 9Mode 1 - Heat Detector:Parameter NoA1R 1BR 2A1S 3BS 4Mode 2 - Smoke Detector:Parameter NoUniversal 1Robust 2Sensitive 3Analogue addressable multisensor detector with short circuit isolator(DB720, DB721, DB722, BA720 & DB721D bases)Notes - the following modes are approved1 - Parameter sets for detection when connected to C-Net detector lineMode 0 - Neural Fire Detector:Parameter NrRobust 2LPCB Ref.No.126ah/05126ba/01280 18 Jan 2014

Certificated ProductsBalanced 4Suppression 5Fast Response 6High Compensation 7High Sensitive Fast 9Mode 1 - Heat Detector:Parameter NrA1R 1BR 2A1S 3BS 4PART 1: SECTION 4.1COMMERCIAL DETECTORSLPCB Ref.No.Mode 2 - Smoke Detector:Parameter NrUniversal 1Robust 2Sensitive 3OOHC7402 - Parameter sets for detection when connected to collective detector lineParameter Resistor value in detector baseStandard Plus -Suppression 33 Kilo OhmsHigh Sensitive Fast 68 Kilo OhmsAnalogue addressable multisensor detector with short circuit isolator(DB720, DB721, DB722 & BA720 bases)Note - the following modes are approvedParameter sets for detection when connected to C-Net detector lineMode 0 - Neural Fire Detector:Parameter NrRobust 2Balanced 4Suppression 5Fast Response 6High Compensation 7High Sensitive Fast 9Mode 1 - Heat Detector:Parameter NrA1R 1BR 2A1S 3BS 4Mode 2 - Smoke Detector:Parameter NrUniversal 1Robust 2Sensitive 3126ba/02Bases:FDB221FDB201FDB202FDB222FDB291FDB292FDB293DB720DB721DB722DB721DBA720DB1131AFDB241base with stand offsbase “Collective” with stand offsbase “Collective” without stand offsbase without stand offsbase attachment surfacebase attachment surface wetbase attachment surface wetDetector baseDetector base with loop contractDetector Base with loop contractDetector Base with snap lockBase with surface mounted lineStandard baseStandard base for special location18 Jan 2014 281

PART 1: SECTION 4.1COMMERCIAL DETECTORSFDB299DB1101ASPF600BaseBaseBaseCertificate No: 126az-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006 & EN 54-17: 2005 and CEA 4021: 2003Multi-Sensor DetectorsCertificated ProductsFDOOT221Analogue addressable multisensor detector with short circuit isolator(FDB221, FDB222, FDB291 and FDB293 bases)Note:1. Meets the requirements of EN 54-7:2000 at sensitivity settings:LPCB Ref.No.126az/01Parameter No. 2 Robust with thermal enhancementParameter No. 4 balanced with thermal enhancementBasesFDB221 base with stand offsFDB222 base without stand offsFDB291 base attachment surfaceFDB293 base attachment surface wetSMS (Novar Systems Ltd)Hamilton Industrial Park, 140 Waterside Road, Leicester LE5 1TN, United KingdomTel: +44 (0)116 246 2100 • Fax: +44 (0)116 246 2016Website: www.smsfire.co.ukCertificate No: 042ak to EN 54-5: 2000 + A1: 20002, EN 54-3: 2001 + A1: 2002, CEA GEI 1-084: Draft 08.08.00, CEA GEI 1-052:11.06.97 Draft 2.0,Point Heat DetectorsCertificated ProductsSEN-780SEN-780-STS-Quad analogue addressable Class P heat detector with sounder(S4-700 Standard base with or without S4-FLUSH semi-flush mounting kit)Notes:1. Meets the requirement of EN 54: Part 5 at the following settings:State 0 - Class A1State 5 - Class B2. Meets the requirements of EN 54: Part 3 at the following sounder tone settings:High - Contiuous 933 HzAlternate - High 933 Hz for 0.25 secs / Low 700 Hz for 0.25 secsS-Quad analogue addressable Class P heat detector with sounder and strobe(S4-700 Standard base with or without S4-FLUSH semi-flush mounting kit)Notes:1. Meets the requirement of EN 54: Part 5 at the following settings:State 0 - Class A1State 5 - Class B2. Meets the requirements of EN 54: Part 3 at the following sounder tone settings:High - Contiuous 933 HzAlternate - High 933 Hz for 0.25 secs / Low 700 Hz for 0.25 secs3. Strobe note included in scope of approvalLPCB Ref.No.042ak/01042ak/03Bases:S4-700 standard baseS4-FLUSH semi-flush fixing kitCertificate No: 042an to EN 54-7: 2000 + A1: 2002, EN 54-5: 2000 + A1: 2002, EN 54-3: 2001 + A1: 2002, EN 54-17: 2005, EN 54-18:2005 and CEA 4021: 2003,Certificate No: 042bf to EN54-5: 2000 + A1: 2002, EN54-7: 2000 + A1: 2002 + A2: 2006, EN54-17: 2005, EN54-18: 2005282 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSMulti Criteria DetectorsCertificated ProductsSEN-770SEN-770-STS-Quad analogue addressable optical smoke and Class A1 heat multisensor detectorwith sounder (S4-700 Standard base with or without S4-FLUSH semi-flush mounting kit)Notes:1. Meets the requirement of EN 54-5 and EN 54-7 at the following settings:State 0 - Medium optical / Class A1 heat2. Meets the requirements of EN 54-3 at the following sounder tone settings:High - Continuous 933 HzAlternate - High 933 Hz for 0.25 secs / Low 700 Hz for 0.25 secsS-Quad analogue addressable optical smoke and Class A1 heat multisensor detectorwith sounder and strobe (S4-700 Standard base with or without S4-FLUSH semi-flushmounting kit)Notes:1. Meets the requirement of EN 54- 5 and EN 54-7 at the following settings:State 0 - Medium optical / Class A1 heat2. Meets the requirements of EN 54: Part 3 at the following sounder tone settings:High - Continuous 933 HzAlternate - High 933 Hz for 0.25 secs / Low 700 Hz for 0.25 secs3. Strobe not included in scope of approval.LPCB Ref.No.042an/04042an/06SEN-710S-Quad analogue addressable optical smoke and Class A1 heat multisensor detector(S4-700 base with or without S4-FLUSH mounting kit)Note:1. Meets the requirement of EN 54: Part 5 and requirements of EN 54: Part 7 at thefollowing settings:State 0 - Medium optical / Class A1 heat042bf/01Bases:S4-700 standard baseS4-FLUSH Semi-flush fixing kitCertificate No: 042be to EN54-5: 2000 + A1: 2002, EN54-17: 2005, EN54-18: 2005Certificate No: 042bd to EN54-7: 2000 + A1: 2002 + A2: 2006, EN54-17: 2005, EN54-18: 2005Point Smoke DetectorsCertificated ProductsSEN-715S-Quad analogue addressable optical smoke detector(S4-700 base with or without S4-FLUSH mounting kit)Note:1. Meets the requirements of EN 54: Part 7 at the following settings:State 0 - Medium opticalLPCB Ref.No.042bd/01SEN-720S-Quad analogue addressableClass P heat detector(S4-700 base with or without S4-FLUSH mounting kit)Note:1. Meets the requirement of EN 54: Part 5 and requirements of EN 54: Part 7 at thefollowing settings:State 0 - Class A1 heat042be/01Bases:S4-700 standard baseS4-FLUSH semi-flush fixing kitSterling Safety SystemsUnit B12a, Holly Farm Business Park, Honiley, Warwickshire CV8 1NP, United KingdomTel: +44(0)1926485282 • Fax: +44(0)1926485090E-mail: info@sterlingsafety.co.uk • Website: www.sterlingsafety.co.ukCertificate No: 928a to EN 54-5: 2000 + A1: 2002 and EN 54-17: 2005Certificate No: 928d to EN 54-5: 2000 + A1: 2002Certificate No: 928j-(cl-6) to EN 54-5: 2000 + A1: 2002 and EN 54-25: 200818 Jan 2014 283

PART 1: SECTION 4.1COMMERCIAL DETECTORSPoint Heat DetectorsCertificated ProductsHFI-TA-01HFI-TAE-01Analogue addressable Class P heat detector with short circuit isolator(HFI-UB-01, HFI-DUB-01, HFI-DMB-01, HFI-DDB-01, HFI-UBS-01, HFI-DUBS-01, HFI-DMBS-01 and HFI-DDBS-01 bases)Note:1. Meets the requirements of EN 54-5 for Class A1R and Class BAnalogue addressable Class P heat detector lite(HFI-UB-01, HFI-DUB-01, HFI-DMB-01, HFI-DDB-01, HFI-UBS-01, HFI-DUBS-01, HFI-DMBS-01 and HFI-DDBS-01 bases)LPCB Ref.No.928a/01928d/01Note:1. Meets the requirements of EN 54-5 for Class A1R and Class BHFW-TA-01 Wireless heat detector (WAB100 base) 928j/01Notes:1. Meets the requirements of EN 54-5 for Class A1R2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR2032A (3 Vdc) - secondary batteryBasesHFI-UB-01HFI-DUB-01HFI-DMB-01HFI-DDB-01HFI-UBS-01HFI-DUBS-01HFI-DMBS-01HFI-DDBS-01WAB100Universal adaptor baseDeep adaptor baseVega adaptor baseVega deep adaptor baseUniversal adaptor base with shorting clipDeep adaptor base with shorting clipVega adaptor base with shorting clipVega deep adaptor base with shorting clipWireless Adaptor BaseCertificate No: 928b to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-17: 2005Certificate No: 928e to EN 54-7: 2000 + A1: 2002 + A2: 2006Point Smoke DetectorsCertificated ProductsHFI-PA-01HFI-PAE-01Analogue addressable photoelectric smoke detector with short circuit isolator(HFI-UB-01, HFI-DUB-01, HFI-DMB-01, HFI-DDB-01, HFI-UBS-01, HFI-DUBS-01, HFI-DMBS-01 and HFI-DDBS-01 bases)Note:1. Meets the requirements of EN 54-7 at the following sensitivity settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowAnalogue addressable photoelectric smoke detector lite(HFI-UB-01, HFI-DUB-01, HFI-DMB-01, HFI-DDB-01, HFI-UBS-01, HFI-DUBS-01, HFI-DMBS-01 and HFI-DDBS-01 bases)Note:1. Meets the requirements of EN 54-7 at the following sensitivity settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowLPCB Ref.No.928b/01928e/01BasesHFI-UB-01HFI-DUB-01HFI-DMB-01HFI-DDB-01HFI-UBS-01HFI-DUBS-01HFI-DMBS-01HFI-DDBS-01Universal adaptor baseDeep adaptor baseVega adaptor baseVega deep adaptor baseUniversal adaptor base with shorting clipDeep adaptor base with shorting clipVega adaptor base with shorting clipVega deep adaptor base with shorting clipCertificate No: 928c to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005 and CEA 4021: 2003Certificate No: 928f to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 and CEA 4021: 2003284 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSMulti-Sensor DetectorsCertificated ProductsHFI-MA-01HFI-MAE-01Analogue addressable Class P heat and photoelectric smoke multi-sensor detector withshort circuit isolator(HFI-UB-01, HFI-DUB-01, HFI-DMB-01, HFI-DDB-01, HFI-UBS-01, HFI-DUBS-01, HFI-DMBS-01 and HFI-DDBS-01 bases)Notes:1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings:Multi Criteria Level 1 (most sensitive) - Thermally enhanced smokedetection with Class A1 heat responseMulti Criteria Level 2 - Thermally enhanced smoke detection with ClassA1 heat responseMulti Criteria Level 3 - Thermally enhanced smoke detection with ClassA1 heat responseMulti Criteria Level 4 (least sensitive) - Thermally enhanced smokedetection with Class A1 heat response2. Meets the requirements of EN 54-5 (Class A1R) at the following settings:Class A1R heat only response3. Meets the requirements of EN 54-7 at the following settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowAnalogue addressable Class P heat and photoelectric smoke multi-sensor detector liteHFI-DUB-01, HFI-DMB-01, HFI-DDB-01, HFI-UBS-01, HFI-DUBS-01, HFI-DMBS-01 andHFI-DDBS-01 bases)Notes:1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings:Multi Criteria Level 1 (most sensitive) - Thermally enhanced smokedetection with Class A1 heat responseMulti Criteria Level 2 - Thermally enhanced smoke detection with ClassA1 heat responseMulti Criteria Level 3 - Thermally enhanced smoke detection with ClassA1 heat responseMulti Criteria Level 4 (least sensitive) - Thermally enhanced smokedetection with Class A1 heat response2. Meets the requirements of EN 54-5 (Class A1R) at the following settings:Class A1R heat only response3. Meets the requirements of EN 54-7 at the following settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowLPCB Ref.No.928c/01928f/01BasesHFI-UB-01HFI-DUB-01HFI-DMB-01HFI-DDB-01HFI-UBS-01HFI-DUBS-01HFI-DMBS-01HFI-DDBS-01Universal adaptor baseDeep adaptor baseVega adaptor baseVega deep adaptor baseUniversal adaptor base with shorting clipDeep adaptor base with shorting clipVega adaptor base with shorting clipVega deep adaptor base with shorting clipCertificate No: 928k-(cl-6) to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-25: 2008Smoke DetectorsCertificated ProductsLPCB Ref.No.HFW-PA-01 Wireless optical smoke detector (WAB100 base) 928k/01Notes:1. Meets the requirements of EN 54-7 in the normal sensitivity setting2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR2032A (3 Vdc) - secondary batteryBases:WAB100Wireless Adaptor Base18 Jan 2014 285

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificate No: 928m-(cl-6) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-25: 2008 and CEA 4021: 2003Multi-Criteria DetectorsCertificated ProductsLPCB Ref.No.HFW-MA-01 Wireless multi-criteria detector (WAB100 base) 928m/01Notes:1. Meets the requirements of EN 54-5 for Class A12. Meets the requirements of EN 54-7 in the normal sensitivity setting3. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR2032A (3 Vdc) - secondary batteryBases:WAB100Wireless Adaptor BaseSystem Sensor3825 Ohio Avenue, Saint Charles, Illinois 60174, USATel: +1 630 377 6580 • Fax: +1 630 377 7245Website: www.systemsensor.comEuropean Sales Enquiries:System Sensor EuropeTel: +44 (0)1403 891920 • Fax: +44 (0)1403 891921Certificate No: 118h to EN 54-7: 2000 + A1: 2002 + A2: 2006Point Smoke DetectorsCertificated Products7251 Analogue addressable photoelectric laser smoke detector (B501, B501AP, B501DG,B524IEFT, B524IEFT-1 bases)Note: meets requirements of EN 54: Part 7 at sensitivities 7 to 9 inclusiveLPCB Ref.No.118h/01Bases:B501 analogue sensor baseB501AP intelligent detector baseB501DG deep baseB524IEFT short circuit isolator baseB524IEFT-1 short circuit isolator baseSystem Sensor EuropeKAC House, Thornhill Road, North Moons Moat, Redditch, Worcestershire B98 9ND, United KingdomTel: +44 (0)1527 406700 • Fax: +44 (0)1527 406699Website: www.systemsensoreurope.comCertificate No: 118h to EN54-7: 2000Certificated ProductsLZR-1MAnalogue addressable photoelectric laser smoke detector (B501, B501DG, B524IEFT,B524IEFT-1 bases)Note: meets requirements of EN 54: 7 at sensitivities 7 to 9 inclusiveLPCB Ref.No.118h/01BasesB501DG deep baseB524IEFT short circuit isolator baseB524IEFT-1 short circuit isolator base286 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSSystem Sensor, Honeywell International (I) PVT. LimitedSector 36, Pace City - II, Gurgaon - 122 004, Haryana, IndiaTel: +91 124 4752700 • Fax: +91 124 4752750E-mail: Arvind.Rathaur@Honeywell.comCertificate No: 550a to EN 54-7: 2000 + A1: 2002 + A2: 2006Certificate No: 550d to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-17: 2005Smoke DetectorsCertificated Products2351EEC01003FL/1003Conventional photoelectric smoke detector(B401, B401DG, B401R, B401SD, B401RSD, B401R1000, B401DGR, B401DGR1000 &B401DGSD bases)Note: Meets the requirements of EN54-7:2000 at low, medium & high sensitivity settings.Conventional photoelectric smoke detector (ECO1000B, ECO1000BSD, ECO1000BR,ECO1000BRSD, ECO1000BR680, ECO1000BR680SD, ECO1000BR1000 &ECO1000BR1000SD bases)Conventional photoelectric smoke detector(FL/1000B base)LPCB Ref.No.550a/01550a/02550a/022251EM Analogue addressable optical smoke detector (B501, B501DG and B5241EFT-1 bases) 550a/03Notes : Meets EN 54-7 with low, medium and high sensitivity settings22051E-xx-yyAnalogue addressable optical smoke detector(B501AP, B501, B524IEFT-1, B524HTR and B524RTE bases)Notes:1) xx = (Range 0-99) ~ indicates the communication software protocol2) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White3) meets the requirements of EN 54-7: 2000 at high and low sensitivity550a/042FA51 Conventional photoelectric smoke detector (BFA1 base) 550a/0522051EI-xx-yyAnalogue addressable optical smoke detector with short circuit isolator (B501AP,B524HTR and B524RTE bases)Notes:1) xx = (Range 0-99) ~ indicates the communication software protocol2) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White3) Meets the requirements of EN 54-7: 2000 at high and low sensitivity550d/01Bases:B401 standard baseB401DG deep baseB401R standard base with schottky diodeB401SD standard base with schottky diodeB401RSD standard base with 470 ohm resistor and schottky diodeB401R1000 standard base with 1000 ohm resistorB401DGR deep base with 470 ohm resistorB401DGR1000 deep base with 1000 ohm resistorB401DGSD deep base with schottky diodeECO1000B standard baseECO1000BSD standard base with schottky diodeECO1000BR standard base, 470 ohm resistorECO1000BRSD standard base, 470 ohm resistor and schottky diodeECO1000BR680 standard base, 680 ohm resistorECO1000BR680SD standard base, 680 ohm resistor and schottky diodeECO1000BR1000 standard base, 1000 ohm resistorECO1000BR1000SD standard base, 1000 ohm resistor and schottky diodeB501 standard analogue detector baseB501DG deep analogue detector baseFL/B401 standard baseFL/1000B standard baseB501AP intelligent detector baseB524IEFT-1 analogue short circuit isolator baseB524HTR heater baseB524RTE latching relay baseBFA1 standard baseCertificate No: 550b to EN54-5: 2000 + A1: 2002, EN54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003Certificate No: 550e to EN54-5: 2000 + A1: 2002, EN54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005 & CEA 4021: 200318 Jan 2014 287

PART 1: SECTION 4.1COMMERCIAL DETECTORSMulti Criteria DetectorsCertificated Products2351TEMConventional optical/thermal detector(B401, B401DG, B401R, B401SD, B401RSD, B401R1000, B401DGR, B401DGR1000 &B401DGSD bases)Note: Meets the requirements of EN54-5:2000 at Class A1R and EN54-7:2000 at low,medium & high sensitivity settings.ECO1002 Conventional photo-thermal detector(ECO1000B, ECO1000BSD, ECO1000BR, ECO1000BRSD, ECO1000BR680,ECO1000BR680SD, ECO1000BR1000 & ECO1000BR1000SD bases)Note: Meets the requirements of EN 54-5:2000 at class A1R at pre-set sensitivity.FL/1002Conventional optical/thermal detectorbase)Notes: Meets the requirements of EN54-5 at class A1R at pre-set sensitivityLPCB Ref.No.550b/01550b/02550b/022251TEMAnalogue optical/thermal smoke & heat detector (B501, B501DG and B5241EFT-1 550b/03bases)Notes :1) Meets the requirements of EN 54-7: 2000 at sensitivity settings 1 to 52) Meets the requirements of EN 54-5: 2000 at Class A1R22051TLE-xx-yyAnalogue addressable photo-thermal-IR multi-criteria detector550b/04(B501AP, B501, B524IEFT-1, B524HTR and B524RTE bases)Notes:1) xx = (Range 0-99) ~ indicates the communication software protocol2) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White3) Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1R22051TE-xx-yyAnalogue addressable photo-thermal multi-criteria detector550b/05(B501AP, B501, B524IEFT-1, B524HTR and B524RTE bases)Notes:1) xx = (Range 0-99) ~ indicates the communication software protocol2) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White3)Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1R2FA51T Conventional photo-thermal class A1R detector (BFA1 base) 550b/06Note: Meets the requirements of EN54-5: 2000 class A1R at pre-set sensitivity22051TLEI-xx-yyAnalogue addressable photo-thermal-IR multi-criteria smoke detector with short circuit 550e/01isolator (B501AP, B524HTR and B524RTE bases)Notes:1) xx = (Range 0-99) ~ indicates the communication software protocol2) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White3) Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1R22051TEI-xx-yyAnalogue addressable photo-thermal multi-criteria smoke detector with short circuitisolator (B501AP, B524HTR and B524RTE bases)Notes:1) xx = (Range 0-99) ~ indicates the communication software protocol2) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White3) Certified at the following settings: -Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021:2003Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1R550e/02Bases:B401 standard baseB401DG deep baseB401R standard base with schottky diodeB401SD standard base with schottky diodeB401RSD standard base with 470 ohm resistor and schottky diodeB401R1000 standard base with 1000 ohm resistorB401DGR deep base with 470 ohm resistorB401DGR1000 deep base with 1000 ohm resistorB401DGSD deep base with schottky diodeECO1000B standard baseECO1000BSD standard base with schottky diodeECO1000BR standard base, 470 ohm resistor288 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSECO1000BRSD standard base, 470 ohm resistor and schottky diodeECO1000BR680 standard base, 680 ohm resistorECO1000BR680SD standard base, 680 ohm resistor and schottky diodeECO1000BR1000 standard base, 1000 ohm resistorECO1000BR1000SD standard base, 1000 ohm resistor and schottky diodeB501 standard analogue detector baseB501DG deep analogue detector baseB5241EFT-1 analogue short circuit isolator baseFL/B401 standard baseFL/1000B standard baseB501AP intelligent detector baseB524HTR heater baseB524RTE latching relay baseBFA1 standard baseCertificate No: 550c to EN 54-5: 2000 + A1: 2002Certificate No: 550f to EN54-5: 2000 + A1: 2002 and EN 54-17: 2005Heat DetectorsCertificated Products5351EClass A1R conventional rate of rise heat detector(B401, B401DG, B401R, B401SD, B401RSD, B401R1000, B401DGR, B401DGR1000 &B401DGSD bases)Note: Meets the requirements of EN54-5:2000 at class A1R.4351EClass BS conventional heat detector(B401, B401DG, B401R, B401SD, B401RSD, B401R1000, B401DGR, B401DGR1000 &B401DGSD bases)Note: Meets the requirements of EN54-5:2000 at class BS.ECO1005 Conventional A1R rate-of-rise heat detector(ECO1000B, ECO1000BSD, ECO1000BR, ECO1000BRSD, ECO1000BR680,ECO1000BR680SD, ECO1000BR1000 & ECO1000BR1000SD bases)FL/1005Conventional Class A1R rate of rise heat detector(FL/1000B base)5251EMAnalogue addressable Class A1S fixed temperature heat detector (B501, B501DG andB5241EFT-1 bases)5251REMAnalogue addressable Class A1R high temperature rate of rise heat detector (B501,B501DG and B5241EFT-1 bases)52051RE-xx-yyAnalogue addressable class A1R rate of rise heat detector(B501AP, B501, B524IEFT-1, B524HTR and B524RTE bases)Notes:1) xx = (Range 0-99) ~ indicates the communication software protocol2) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White52051E-xx-yyAnalogue addressable class A1S fixed temperature heat detector(B501AP, B501, B524IEFT-1, B524HTR and B524RTE bases)Notes:1) xx = (Range 0-99) ~ indicates the communication software protocol2) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates WhiteLPCB Ref.No.550c/01550c/02550c/03550c/03550c/04550c/05550c/06550c/075FA51R Conventional A1R rate of rise heat detector (BFA1 base) 550c/0852051REI-xx-yyAnalogue addressable class A1R rate of rise heat detector with short circuit isolator(B501AP, B524HTR and B524RTE bases)Notes:1) xx = (Range 0-99) ~ indicates the communication software protocol2) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White550f/0152051EI-xx-yyAnalogue addressable class A1S fixed temperature heat detector with short circuitisolator (B501AP, B524HTR and B524RTE bases)Notes:1) xx = (Range 0-99) ~ indicates the communication software protocol2) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates WhiteBases:B401 standard baseB401DG deep baseB401R standard base with schottky diodeB401SD standard base with schottky diodeB401RSD standard base with 470 ohm resistor and schottky diodeB401R1000 standard base with 1000 ohm resistorB401DGR deep base with 470 ohm resistorB401DGR1000 deep base with 1000 ohm resistorB401DGSD deep base with schottky diodeECO1000B standard baseECO1000BSD standard base with schottky diode550f/0218 Jan 2014 289

PART 1: SECTION 4.1COMMERCIAL DETECTORSECO1000BR standard base, 470 ohm resistorECO1000BRSD standard base, 470 ohm resistor and schottky diodeECO1000BR680 standard base, 680 ohm resistorECO1000BR680SD standard base, 680 ohm resistor and schottky diodeECO1000BR1000 standard base, 1000 ohm resistorECO1000BR1000SD standard base, 1000 ohm resistor and schottky diodeFL/B401 standard baseFL/1000B standard baseB501 standard analogue detector baseB501AP intelligent detector baseB524IEFT-1 analogue short circuit isolator baseB524HTR heater baseB524RTE latching relay baseBFA1 Standard BaseTalentum Developments LimitedBeal Lane, Shaw, Oldham, Lancashire OL2 8PF, United KingdomTel: +44 (0)1706 844714 • Fax: +44 (0)1706 882612E-mail: info@talentum.co.uk • Website: www.talentum.co.ukCertificate No: 729a to EN 54-10: 2002Flame DetectorsCertificated ProductsLPCB Ref.No.016589 Conventional IR 3 Flame Detector (007127) 729a/01Note: Meets EN 54-10:2002 at Class 1 only016689 Analogue Addressable IR 3 Flame Detector (007127) 729a/02Note: Meets EN 54-10:2002 at Class 1 only016579 Conventional IR 3 Intrinsically Safe Flame Detector (007127) 729a/03Note: Meets EN 54-10:2002 at Class 1 only016679 Analogue Addressable IR 3 Intrinsically Safe Flame Detector (007127) 729a/04Note: Meets EN 54-10:2002 at Class 1 only016519 Conventional IR 3 (Exd) Flameproof Flame Detector (007127) 729a/05Note: Meets EN 54-10:2002 at Class 1 only016619 Analogue Addressable IR 3 (Exd) Flameproof Flame Detector (007127) 729a/06Note: Meets EN 54-10:2002 at Class 1 only016581 Conventional IR 2 Flame Detector (007127) 729a/07Note: Meets EN 54-10: 2002 at Class 1 only016681 Analogue Addressable IR 2 Flame Detector (007127) 729a/08Note: Meets EN 54-10: 2002 at Class 1 only016571 Conventional IR 2 Intrinsically Safe Flame Detector (007127) 729a/09Note: Meets EN 54-10: 2002 at Class 1 only016511 Conventional IR 2 (Exd) Flameproof Flame Detector (007127) 729a/10Note: Meets EN 54-10: 2002 at Class 1 only016611 Analogue Addressable IR 2 (Exd) Flameproof Flame Detector (007127) 729a/11Note: Meets EN 54-10: 2002 at Class 1 only016591 Conventional UV/IR 2 Flame Detector (007127) 729a/12Note: Meets EN 54-10: 2002 at Class 1 only016521 Conventional UV/IR 2 (Exd) Flameproof Flame Detector (007127) 729a/13Note: Meets EN 54-10: 2002 at Class 1 onlyAncillaries 007127 Mounting BracketTamlite Emergency & FirePipers Road, Park Farm Industrial Estate, Redditch, Worcestershire B98 0HU, United KingdomTel: +44 (0)1527 510598 • Fax: +44 (0)1527 510592E-mail: sales@tamlite.co.uk • Website: www.tamlite.co.ukCertificate No: 928d to EN 54-5: 2000 + A1: 2002Point Heat DetectorsCertificated ProductsLPCB Ref.No.FSV-RR/FH Conventional Class P, heat detector (FSV-CDB base) 928d/02290 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsNote:1. Meets the requirements of EN 54-5 for Class A1R and Class B.LPCB Ref.No.BaseFSV-CDB Universal adaptor base with resistor and Schottky diodeCertificate No: 928e to EN 54-7: 2000 + A1: 2002 + A2: 2006Point Smoke DetectorsCertificated ProductsLPCB Ref.No.FSV-OPT/P Conventional photo smoke detector (FSV-CDB base) 928e/02BaseFSV-CDB Universal adaptor base with resistor and Schottky diodeTeledata S.r.l.Via Giulietti 8, Milan 20132, ItalyTel: +39 02-27201352 • Fax: +39 02-2593704E-mail: info@teledata-i.com • Website: www.teledate-i.comCertificate No: 928a-(cl-6) to EN 54-5: 2000 + A1: 2002 and EN 54-17: 2005Certificate No: 928d-(cl-6) to EN 54-5: 2000 + A1: 2002Point Heat DetectorsCertificated ProductsSF3500SF3500EAnalogue addressable Class P heat detector with short circuit isolator(BS100, BS100E, BS100/S and BS100E/S bases)Note:1. Meets the requirements of EN 54-5 for Class A1R and Class BAnalogue addressable Class P heat detector lite(BS100, BS100E, BS100/S and BS100E/S bases)Note:1. Meets the requirements of EN 54-5 for Class A1R and Class BLPCB Ref.No.928a/01928d/01BasesBS100BS100EBS100/SBS100E/SUniversal adaptor baseVega adaptor baseUniversal adaptor base with shorting clipVega adaptor base with shorting clipCertificate No: 928b-(cl-6) to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-17: 2005Certificate No: 928e-(cl-6) to EN 54-7: 2000 + A1: 2002 + A2: 2006Certificate No: 928f-(cl-6) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 and CEA 4021: 2003Point Smoke DetectorsCertificated ProductsSF1000SF1000EAnalogue addressable photoelectric smoke detector with short circuit isolator(BS100, BS100E, BS100/S and BS100E/S bases)Note:1. Meets the requirements of EN 54-7 at the following sensitivity settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowAnalogue addressable photoelectric smoke detector lite(BS100, BS100E, BS100/S and BS100E/S bases)Note:1. Meets the requirements of EN 54-7 at the following sensitivity settings:Optical only level 1 - HighLPCB Ref.No.928b/01928e/0118 Jan 2014 291

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsSF2000EOptical only level 2Optical only level 3Optical only level 4 - LowAnalogue addressable Class P heat and photoelectric smoke multi-sensor detector lite(BS100, BS100E, BS100/S and BS100E/S bases)Notes:1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at thefollowing settings:Multi Criteria Level 1 (most sensitive) - Thermally enhanced smokedetection with Class A1 heat responseMulti Criteria Level 2 - Thermally enhanced smoke detection with ClassA1 heat responseMulti Criteria Level 3 - Thermally enhanced smoke detection with ClassA1 heat responseMulti Criteria Level 4 (least sensitive) - Thermally enhanced smokedetection with Class A1 heat response2. Meets the requirements of EN 54-5 (Class A1R) at the followingsettings:Class A1R heat only response3. Meets the requirements of EN 54-7 at the following settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowLPCB Ref.No.928f/01BasesBS100BS100EBS100/SBS100E/SUniversal adaptor baseVega adaptor baseUniversal adaptor base with shorting clipVega adaptor base with shorting clipCertificate No: 928c-(cl-6) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005 and CEA 4021: 2003Multi-Criteria DetectorsCertificated ProductsSF2000Analogue addressable Class P heat and photoelectric smoke multi-sensor detector withshort circuit isolator(BS100, BS100E, BS100/S and BS100E/S bases)Notes:1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at thefollowing settings:Multi Criteria Level 1 (most sensitive) - Thermally enhanced smokedetection with Class A1 heat responseMulti Criteria Level 2 - Thermally enhanced smoke detection with ClassA1 heat responseMulti Criteria Level 3 - Thermally enhanced smoke detection with ClassA1 heat responseMulti Criteria Level 4 (least sensitive) - Thermally enhanced smokedetection with Class A1 heat response2. Meets the requirements of EN 54-5 (Class A1R) at the followingsettings:Class A1R heat only response3. Meets the requirements of EN 54-7 at the following settings:Optical only level 1 - HighOptical only level 2Optical only level 3Optical only level 4 - LowLPCB Ref.No.928c/01BasesBS100BS100EBS100/SBS100E/SUniversal adaptor baseVega adaptor baseUniversal adaptor base with shorting clipVega adaptor base with shorting clip292 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSTeletek Electronics JSC14A Srebarna Street, Sofia 1407, BulgariaTel: +359 2 9694 700 • Fax: +359 2 9625 213E-mail: info@teletek-electronics.bg • Website: www.teletek-electronics.comCertificate No: 1139a to EN54-5: 2000 + A1: 2002Heat DetectorsCertificated ProductsT110 Analogue addressable class A1R heat detector (rate of rise and fixed temperature) (B124base)LPCB Ref.No.1139a/01Base:B124Standard analogue addressable detector baseCertificate No: 1139b to EN54-7: 2000 + A1: 2002 + A2: 2006Smoke DetectorsCertificated ProductsLPCB Ref.No.S130 Analogue addressable optical smoke detector (B124 base) 1139b/01Base:B124Standard analogue addressable detector baseCertificate No: 1139c to EN54-5: 2000 + A1: 2002, EN54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003Multi-Sensor/Multi-Criteria DetectorsCertificated ProductsLPCB Ref.No.M140 Analogue addressable combined class A1R heat and optical smoke detector (B124 base) 1139c/01Base:B124Standard analogue addressable detector baseThorn Security Limited, trading as Tyco Safety ProductsDunhams Lane, Letchworth SG6 1BD, United KingdomTel: +44 (0)1462 667700 • Fax: +44 (0)1462 667777E-mail: mashbury@tycoint.com • Website: www.tycosafetyproducts-europe.comCertificate No: 681c-(cl-1) to EN 54-5: 2000 + A1: 2002Certificate No: 681p-(cl-1) to EN 54-5: 2000 + A1: 2002 and EN 54-17: 2005Heat DetectorsCertificated ProductsLPCB Ref.No.801H MX Digital addressable Class P heat detector (4B, 4B-I and 5B bases) 681c/01Note:1. Meets EN54 Part 5 for classes A1R, A2S and CR.601H-R Conventional Class A1R heat detector (4B, 4B-D and 5B bases) 681c/02601H-F Conventional Class A1S heat detector (4B, 4B-D and 5B bases) 681c/03MD601ExConventional intrinsically safe Class A1R rate of rise heat detector681c/04(MUBEx base, 5BEx bases)MD611ExConventional intrinsically safe Class A1S fixed temperature heat detector (MUBEx base, 681c/055BEx base)816H MX Digital addressable Class P heat detector (4B, 4B-I and 5B bases) 681c/06Note:1. Meets EN54 Part 5 for classes A1R, A2S and CR.611H-F Conventional Class A1S fixed temperature heat detector 681c/0718 Jan 2014 293

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLPCB Ref.No.(4B, 4B-D and 5B base)631H-FConventional Class CS fixed temperature heat detector681c/08(4B, 4B-D and 5B base)840H MX digital addressable Class P heat detector (4B, 4B-I, and 5B bases) 681c/09Note:1. Approved with the following mode configurations:-- Heat detector at Class A1R- Heat detector at Class A2S- Heat detector at Class CR830H MX digital addressable Class P heat detector (4B, 4B-I, and 5B bases) 681c/10Note:1. Approved with the following mode configurations:-- Heat detector at Class A1R- Heat detector at Class A2S- Heat detector at Class CR850HMX digital addressable Class P heat detector681p/01(4B, 4B-C, and 5B bases)Note:1. Approved with the following mode configurations:-- Heat detector at Class A1R- Heat detector at Class A2S- Heat detector at Class CRBases:4B 4" universal mounting base4B-C, 4” continuity base4B-D 4" diode mounting base4B-I, 4” isolator base5B 5” Universal mounting base5BEX Intrinsically safe detector baseMUBEx Intrinsically safe detector baseCertificate No: 681j-(cl-1) to EN 54-7: 2000 + AI: 2002 + A2: 2006 and CEA4021: 1999Certificate No: 681q-(cl-1) to EN 54-5: 2000 + A1:2002, EN 54-7: 2000 + A1:2002 + A2: 2006, LPS1274 Issue 1 and CEA 4021: 2003Certificate No: 681b-(cl-1) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 and CEA4021: 2003Certificate No: 681a-(cl-1) to EN 54-5: 2000 + A1: 2002 and Test Schedule 68297/29.0 Test schedule for Carbon Monoxide FireDetectorsCertificate No: 681e-(cl-1) to EN 54-5: 2000 + A1: 2002 and LPS1265 Iss.1.0Certificate No: 681w-(cl-1) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005 and CEA4021: 2003Multi-criteria DetectorsCertificated Products801CHMX Digital addressable Carbon Monoxide and Class P heat detector(4B and 5B bases)Notes:Approved with the following mode configurations:-1. Carbon monoxide detector at High and Normal sensitivity2. Rate of rise heat detector at Class A1R3. Fixed temperature heat detector at Class A2S4. Heat enhanced carbon monoxide fire detector at High and Normal sensitivity5. Heat enhanced carbon monoxide fire detector at High and Normal sensitivity and rateof rise heat detector at Class A1RLPCB Ref.No.681a/01801PHConditions of approval:1. The 801CH should only be installed in accordance with the manufacturersrecommendations.2. The 801CH should not be set only as a carbon monoxide fire detector where there isa specific risk of rapid burning / flaming fires.3. Refer to technical publication 17A-02-DET for limitations on the use of carbonmonoxide fire detection.MX digital addressable photoelectric smoke and Class P heat detector(4B, 4B-I and 5B Bases)681b/01Note:Approved with the following mode configurations:-1. Optical smoke detector at High and Normal sensitivity2. Rate of rise heat detector at Class A1R3. Fixed temperature heat detector at Class A2S294 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated Products4. Heat enhanced optical smoke detector at High and Normal sensitivity5. Optical smoke detector using FastLogic at High and Normal sensitivity6. Heat enhanced optical smoke detector using FastLogic at High and Normal sensitivityLPCB Ref.No.840PCMX digital addressable photoelectric smoke, Class P heat and Carbon Monoxide 681b/02detector (4B, 4B-I, and 5B bases)Notes:1. Approved with the following mode configurations:-- UNIV Universal optical smoke and A2S heat multi-criteria detector- RESIL Resilient optical smoke and A2S heat multi-criteria detector- Heat detector at Class A1R- HPO Heat enhanced optical smoke detector at Normal sensitivity2. The Carbon Monoxide toxic gas/CCO modes are not approved830PCMX digital addressable photoelectric smoke, Class P heat and Carbon Monoxide 681b/03detector (4B, 4B-I, and 5B bases)Notes:1. Approved with the following mode configurations:-- UNIV Universal optical smoke and A2S heat multi-criteria detector- RESIL Resilient optical smoke and A2S heat multi-criteria detector- Heat detector at Class A1R- HPO Heat enhanced optical smoke detector at Normal sensitivity2. The Carbon Monoxide toxic gas/CCO modes are not approved840PHMX digital addressable photoelectric smoke and Class P heat detector (4B, 4B-I, and 681b/045B bases)Note:Approved with the following mode configurations:-- Heat detector at Class A1R- Heat detector at Class A2S- OPT Optical smoke detector at High, Normal and Low sensitivity- FL OPT Optical smoke detector at High, Normal and Low sensitivity using FastLogic- HPO Heat enhanced optical smoke at High, Normal and Low sensitivity- FL HPO Heat enhanced optical smoke at High, Normal and Low sensitivity usingFastLogic.830PHMX digital addressable photoelectric smoke and Class P heat detector (4B, 4B-I, and 681b/055B bases)Note:Approved with the following mode configurations:-- Heat detector at Class A1R- Heat detector at Class A2S- OPT Optical smoke detector at High, Normal and Low sensitivity- FL OPT Optical smoke detector at High, Normal and Low sensitivity using FastLogic- HPO Heat enhanced optical smoke at High, Normal and Low sensitivity- FL HPO Heat enhanced optical smoke at High, Normal and Low sensitivity usingFastLogic.601CHConventional Class A1R thermally enhanced Carbon Monoxide detector681e/01(4B, 4B-D and 5B Bases)601PH Conventional high performance photoelectric smoke detector (4B, 4B-D and 5B bases) 681j/01MR601TexConventional intrinsically safe high performance photoelectric smoke detector with heat 681j/02enhancement (MUBEx base, 5BEx bases)816PH MX Digital addressable photoelectric detector with heat enhancement (4B and 5B bases) 681j/03Note:1. Meets EN54 Part 7 at Normal sensitivity801PCAnalogue addressable combined optical, heat and CO fire detector681q/01(4B, 5B and DHM-5B bases)Notes:1. Certificated at the following modes:Mode 0 - Universal multi-criteria (smoke /heat/CO) wide spectrumfire detection with Class A2S heat detectionMode 1 - Multi-criteria (smoke /heat/CO) fire detection with high false alarmimmunity with Class A2S heat detectionMode 2 - Class A1R heat detectionMode 3 - Thermally enhanced smoke detectionMode 4 - Thermally enhanced CO detection2. Meets the requirements of LPS 1274 at modes 0 and 4, CEA 4021 andEN 54-7 at modes 0, 1 and 3, and EN 54-5 at modes 0, 1, and 2.811PCAnalogue addressable combined optical, heat and CO fire detector ( marine version) 681q/02(4B, 5B and DHM-5B bases)Notes:1. Certificated at the following modes:Mode 0 - Universal multi-criteria (smoke /heat/CO) wide spectrumfire detection with Class A2S heat detectionMode 1 - Multi-criteria (smoke /heat/CO) fire detection with high false alarm18 Jan 2014 295

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated Products850PC851PCN850PH851PH851PHNimmunity with Class A2S heat detectionMode 2 - Class A1R heat detectionMode 3 - Thermally enhanced smoke detectionMode 4 - Thermally enhanced CO detection2. Meets the requirements of LPS 1274 at modes 0 and 4, CEA 4021 andEN 54-7 at modes 0, 1 and 3, and EN 54-5 at modes 0, 1, and 2.MX digital addressable photoelectric smoke, Class P heat and Carbon Monoxidedetector with short circuit isolator(4B, 4B-C and 5B bases)Notes:1. Approved with the following mode configurations:-- UNIV Universal optical smoke and A2S heat multi-criteria detector- RESIL Resilient optical smoke and A2S heat multi-criteria detector- Heat detector at Class A1R- HPO Heat enhanced optical smoke detector at Normal sensitivity2. The Carbon Monoxide toxic gas/CCO modes are not approvedMX digital addressable photoelectric smoke, Class P heat and Carbon Monoxidedetector with short circuit isolator [Ex(N) version] (4B-EN base)Notes:1. Approved with the following mode configurations:-- UNIV Universal optical smoke and A2S heat multi-criteria detector- RESIL Resilient optical smoke and A2S heat multi-criteria detector- Heat detector at Class A1R- HPO Heat enhanced optical smoke detector at Normal sensitivity2. The Carbon Monoxide toxic gas/CCO modes are not approvedMX digital addressable photoelectric smoke and Class P heat detector with short circuitisolator (4B, 4B-C, and 5B bases)Note:Approved with the following mode configurations:-- Heat detector at Class A1R- Heat detector at Class A2S- OPT Optical smoke detector at High, Normal and Low sensitivity- FL OPT Optical smoke detector at High, Normal and Low sensitivity using FastLogic- HPO Heat enhanced optical smoke at High, Normal and Low sensitivity- FL HPO Heat enhanced optical smoke at High, Normal and Low sensitivity usingFastLogic.MX digital addressable photoelectric smoke and Class P heat detector with short circuitisolator [Marine version] (4B, 4B-C, and 5B bases)Note:1. Approved with the following mode configurations:-- Heat detector at Class A1R- Heat detector at Class A2S- OPT Optical smoke detector at High, Normal and Low sensitivity- FL OPT Optical smoke detector at High, Normal and Low sensitivity using FastLogic- HPO Heat enhanced optical smoke at High, Normal and Low sensitivity- FL HPO Heat enhanced optical smoke at High, Normal and Low sensitivity usingFastLogic.MX digital addressable photoelectric smoke and Class P heat detector with short circuitisolator [Ex(N) version] (4B-EN base)Note:1. Approved with the following mode configurations:-- Heat detector at Class A1R- Heat detector at Class A2S- OPT Optical smoke detector at High, Normal and Low sensitivity- FL OPT Optical smoke detector at High, Normal and Low sensitivity using FastLogic- HPO Heat enhanced optical smoke at High, Normal and Low sensitivity- FL HPO Heat enhanced optical smoke at High, Normal and Low sensitivity usingFastLogic.LPCB Ref.No.681w/01681w/02681w/03681w/04681w/05Bases:4B 4” universal mounting base4B-C 4” continuity base4B-D Diode mounting base4B-D 4" Diode mounting base4B-EN 4” Ex{N} compliant mounting base4B-I, 4” isolator base5B 5” Universal mounting base5BEx Intrinsically safe mounting baseMUB Universal mounting baseMUBEx intrinsically safe detector baseDHM-5B - Deck head mounting adaptor for 5" base296 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificate No: 763a to EN 54-10: 2002Certificate No: 681r-(cl-1) to EN 54-10: 2002Certificate No: 018e-(cl-1) to EN 54-10: 2001+ A1:2005Flame DetectorsCertificated ProductsLPCB Ref.No.S231i+ Class 1, conventional 2-wire intrinsically safe IR flame detector 018e/01S231f+ Class 1, conventional 2-wire flame proof IR flame detector 018e/02S241i+ Class 1, 4-20mA intrinsically safe IR flame detector 018e/03S241f+ Class 1, 4-20mA flame proof IR flame detector 018e/04S251i+ Class 1, analogue addressable intrinsically safe IR flame detector 018e/05S251f+ Class 1, analogue addressable flame proof IR flame detector 018e/06S261f+ Class 1, relay flame proof IR flame detector 018e/07S271f+ Class 1, analogue addressable intrinsically safe triple IR flame detector with MX interface 018e/08S271i+ Class 1, analogue addressable flame proof triple IR flame detector with MX interface 018e/09601F Conventional Class 2 flame detector (4B, 4B-D and 5B bases) 681r/01601FEx Conventional Class 2 intrinsically safe flame detector (MUBEx and 5BEx bases) 681r/02801F MX addressable Class 2 flame detector (4B and 5B bases) 681r/03801FEx MX addressable Class 2 intrinsically safe flame detector (MUBEx and 5BEx bases) 681r/04S231i+ Conventional class 1 2-wire intrinsically safe IR flame detector 763a/01S231f+ Conventional class 1 2-wire flame proof IR flame detector 763a/02S241i+ 4-20mA current class 1 intrinsically safe IR flame detector 763a/03S241f+ 4-20mA current class 1 flame proof IR flame detector 763a/04S251i+ Analogue addressable class 1 intrinsically safe IR flame detector 763a/05S251f+ Analogue addressable class 1 flame proof IR flame detector 763a/06S261f+ Relay class 1 flame proof IR flame detector 763a/07S271i+ Analogue class 1 triple IR flame detector with MX interface 763a/08S271f+ Analogue class 1 flame proof triple IR flame detector with MX interface 763a/09Bases:4B 4” standard mounting base4B-D 4” diode mounting base5B standard mounting baseMUBEx Intrinsically safe mounting base5BEx Intrinsically safe mounting baseMUB standard mounting base5B standard mounting base5BI addressable isolator baseCertificate No: 681d-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006Certificate No: 681z-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-17: 2005Smoke DetectorsCertificated ProductsLPCB Ref.No.801I MX Digital addressable ionisation smoke detector (4B, 4B-I and 5B bases) 681d/01Note:1. Meets EN54 Part 7 at High and Normal Sensitivity601I Conventional ionisation smoke detector (4B, 4B-D and 5B bases) 681d/02601P Conventional optical smoke detector (4B, 4B-D and 5B bases) 681d/03816P840P830P850PMX Digital addressable photoelectric smoke detector(4B, 4B-I and 5B bases)Note:1. Meets EN54 Part 7 at High and Normal SensitivityMX digital addressable photoelectric smoke detector(4B, 4B-I, and 5B bases)Note:1. Approved with the following mode configurations:-- OPT Optical smoke detector at High, Normal and Low sensitivity- FL OPT Optical smoke detector at High, Normal and Low sensitivity using FastLogicMX digital addressable photoelectric smoke detector (4B,4B-I, and 5B bases)Note:1. Approved with the following mode configurations:-- OPT Optical smoke detector at High, Normal and Low sensitivity- FL OPT Optical smoke detector at High, Normal and Low sensitivity using FastLogicMX digital addressable photoelectric smoke detector with short circuit isolator (4B, 4B-Cand 5B bases)Note:681d/05681d/06681d/07681z/0118 Jan 2014 297

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated Products1. Approved with the following mode configurations:-- OPT Optical smoke detector at High, Normal and Low sensitivity- FL OPT Optical smoke detector at High, Normal and Low sensitivity using FastLogicLPCB Ref.No.Bases:4B 4" universal mounting base4B-C, 4” continuity base4B-D Diode mounting base4B-I, 4” isolator base5B 5” Universal mounting baseCertificate No: 681aa-(cl-1) to EN 54-17: 2005Isolating baseCertificated ProductsLPCB Ref.No.4B-I Short circuit isolator base 681aa/01UniPOS Ltd47 San Stefano Street, Pleven, BulgariaTel: +359 64 891124E-mail: pleven@unipos-bg.com • Website: www.unipos-bg.comCertificate No: 1107a to EN 54-5: 2000 A1: 2002Certificated ProductsLPCB Ref.No.FD7120 Analogue addressable rate of rise heat detector (7100 base) 1107a/01Note:Meets the requirements of EN 54-5 at Class A2RFD8020 Conventional rate-of-rise heat detector (8000 base) 1107a/02Note:Meets the requirements of EN 54-5 at Class A2RBases7100 standard analogue detector base8000 standard conventional detector baseCertificate No: 1107b to EN 54-7: 2001 + A1: 2002 + A2: 2006Certificated ProductsLPCB Ref.No.FD7130 Analogue addressable optical smoke detector (7100 base) 1107b/01Note:Meets the requirements of EN 54-7 in the normal sensitivity setting.FD8030 Conventional optical smoke detector (8000 base) 1107b/02Note:Meets the requirements of EN 54-7 in the normal sensitivity setting.Bases7100 standard analogue detector base8000 standard conventional detector baseCertificate No: 1107c to EN 54-5: 2000 + A1: 2002, EN 54-7: 2001 + A1: 2002 + A2: 2006 & CEA 4021: July 2003Certificated ProductsLPCB Ref.No.FD7160 Analogue addressable combined heat & optical smoke detector (7100 base) 1107c/01Note:298 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLPCB Ref.No.Meets the requirements of EN 54-5: 2000 (Class A2R) & EN54-7: 2000 at default normalsensitivity setting.FD8060 Conventional combined heat & optical smoke detector (8000 base) 1107c/02Note:Meets the requirements of EN 54-5: 2000 (Class A2R) & EN54-7: 2000 at default normalsensitivity setting.Bases7100 standard analogue detector base8000 standard conventional detector baseUTC Fire & Security BVKelvinstraat 7, NL-6003DH, Weert, The NetherlandsTel: + 31 495 58 30 00 • Fax: + 31 495 55 00 42E-mail: Daragh.O'Donnell@fs.utc.com • Website: www.utcfireandsecurity.comCertificate No: 092p-(cl-1) to EN 54-5: 2000 + A1: 2002Certificated ProductsEA20E-3Analogue addressable Class P heat detector(ZP7-SB1 base) (Labelled EST)Note:1. Approved for use at Heat Class sensitivity settings 1 (Class A2) and 2 (Class A1) only.PRRPHDI2004Analogue addressable Class P heat detector(ZP7-SB1 base) (Labelled Photain Controls)Note:1. Approved for use at Heat Class sensitivity settings 1 (Class A2) and 2 (Class A1) only.T-17003 Analogue addressable Class P heat detector(ZP7-SB1 base) (Labelled Plana Fabrega)Note:1. Approved for use at Heat Class sensitivity settings 1 (Class A2) and 2 (Class A1) only.ZP720-3Analogue addressable Class P heat detector(ZP7-SB1 base) (Labelled Ziton)Note:1. Approved for use at Heat Class sensitivity settings 1 (Class A2) and 2 (Class A1) only.E620-581-3Conventional Class A1 heat detector(E6-BS1 base) (Labelled EST)Z620-581-3Conventional Class A1 heat detector(Z6-BS1 & Z6-BS5 bases) (Labelled Ziton)Z620-581-3P Conventional fixed temperature heat detector, Polar white, (Class A1)& Z6-BS5-P bases) (Labelled Ziton)E620-582-3Conventional Class A1R heat detector(E6-BS1 base) (Labelled EST)PRRP2004Conventional Class A1R heat detector(FSBP2000 base) (Labelled Photain Controls)TV-7003Conventional Class A1R heat detector(BD-21 & BD-22 bases) (Labelled Plana Fabrega)Z620-582-3Conventional Class A1R heat detector(Z6-BS1 & Z6-BS5 bases) (Labelled Ziton)Z620-582-3PConventional rate of rise heat detector, Polar white, (Class A1R)& Z6-BS5-P bases) (Labelled Ziton)E620-771-3Conventional Class B heat detector(E6-BS1 base) (Labelled EST)PHDP2004HTConventional Class B heat detector(FSBP2000 base) (Labelled Photain Controls)Z620-771-3Conventional Class B heat detector(Z6-BS1 & Z6-BS5 bases) (Labelled Ziton)Z620-771-3P Conventional high temperature heat detector, Polar white, (Class B)& Z6-BS5-P bases) (Labelled Ziton)LPCB Ref.No.092p/01092p/01092p/01092p/01092p/02092p/02092p/02092p/03092p/03092p/03092p/03092p/03092p/04092p/04092p/04092p/04BasesZP7-SB1Z6-BS1E6-BS1BD-21FSBP2000Standard baseConventional surface baseConventional surface baseConventional surface baseConventional surface base18 Jan 2014 299

PART 1: SECTION 4.1COMMERCIAL DETECTORSZ6-BS5BD-22Z6-BS1-PZ6-BS5-PConventional diode baseConventional diode basePolar white conventional surface basePolar white conventional diode baseCertificate No: 092n-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006Certificated ProductsEA10E-2Analogue addressable ionisation smoke detector(ZP7-SB1 base) (Labelled EST)Note:1. Approved for use at Standard sensitivity setting only.I-17001 Analogue addressable ionisation smoke detector(ZP7-SB1 base) (Labelled Plana Fabrega)Note:1. Approved for use at Standard sensitivity setting only.ISDI2000Analogue addressable ionisation smoke detector(ZP7-SB1 base) (Labelled Photain Controls)Note:1. Approved for use at Standard sensitivity setting only.ZP710-2Analogue addressable ionisation smoke detector(ZP7-SB1 base) (Labelled Ziton)Note:1. Approved for use at Standard sensitivity setting only.EA30E-2Analogue addressable photoelectric smoke detector(ZP7-SB1 base) (Labelled EST)Note:1. Approved for use at Standard sensitivity setting only.O-17002 Analogue addressable photoelectric smoke detector(ZP7-SB1 base) (Labelled Plana Fabrega)Note:1. Approved for use at Standard sensitivity setting only.PPDI2000Analogue addressable photoelectric smoke detector(ZP7-SB1 base) (Labelled Photain Controls)Note:1. Approved for use at Standard sensitivity setting only.ZP730-2Analogue addressable photoelectric smoke detector(ZP7-SB1 base) (Labelled Ziton)Note:1. Approved for use at Standard sensitivity setting only.ZP730-2S30Analogue addressable optical smoke sensor,(ZP7-SB1-P base) (Labelled Ziton with Chubb logo)Note:Approved for use at Standard sensitivity setting only.E610-3 Conventional ionisation smoke detector(E6-BS1 base) (Labelled EST)Z610-3 Conventional ionisation smoke detector(Z6-BS1 & Z6-BS5 bases) (Labelled Ziton)E630-3 Conventional photoelectric smoke detector(E6-BS1 base) (Labelled EST)O-7002 Conventional photoelectric smoke detector(BD-21 & BD-22 bases) (Labelled Plana Fabrega)PPDP2004Conventional photoelectric smoke detector(FSBP2000 base) (Labelled Photain Controls)Z630-3 Conventional photoelectric smoke detector(Z6-BS1 & Z6-BS5 bases) (Labelled Ziton)Z630-3PConventional optical smoke detector, Polar white& Z6-BS5-P bases) (Labelled Ziton)Z630-3S30Conventional optical smoke detector, Polar white, Chubb& Z6-BS5 basesZiton with Chubb logo)LPCB Ref.No.092n/01092n/01092n/01092n/01092n/02092n/02092n/02092n/02092n/02092n/03092n/03092n/04092n/04092n/04092n/04092n/04092n/04BasesZP7-SB1Z6-BS1E6-BS1BD-21FSBP2000Z6-BS5BD-22Z6-BS1-PZ6-BS5-PStandard baseConventional surface baseConventional surface baseConventional surface baseConventional surface baseConventional diode baseConventional diode basePolar white conventional surface basePolar white conventional diode base300 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificate No: 092k-(cl-1) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003Certificated ProductsEA32E-2 Analogue addressable combined photoelectric smoke and heat detector.(Labelled EST) (ASBE-2 base)Note:1. Certificated at sensitivity profiles 1-4 for EN 54:7and sensitivity profiles5 (A1) and 6(A2) for EN 54:5.EAS707 Analogue addressable combined photoelectric smoke and heat detector.(Labelled EEC) (ZP7-SB1 base)Note:1. Certificated at sensitivity profiles 1-4 for EN 54:7 and sensitivity profiles5 (A1) and 6(A2) for EN 54:5.OT-17004 Analogue addressable combined photoelectric smoke and heat detector.(Labelled Plana Fabrega) (ZP7-SB1 base)Note:1. Certificated at sensitivity profiles 1-4 for EN 54:7 and sensitivity profiles5 (A1) and 6(A2) for EN 54:5.PPDPHDI2000Analogue addressable combined photoelectric smoke and heat detector.(Labelled Photain Controls) (ZP7-SB1 base)Note:1. Certificated at sensitivity profiles 1-4 for EN 54:7and sensitivity profiles5 (A1) and 6(A2) for EN 54:5.ZP732-2 Analogue addressable combined photoelectric smoke and heat detector.(Labelled Ziton) (ZP7-SB1 base)Note:1. Certificated at sensitivity profiles 1-4 for EN 54:7and sensitivity profilesLPCB Ref.No.092k/01092k/01092k/01092k/01092k/01ZP732-2S305 (A1) and 6(A2) for EN 54:5.Analogue addressable combination smoke and heat detector,(Labelled Ziton with Chubb logo) (ZP7-SB1-P base)Note :Certificated at sensitivity profiles 1-4 for EN 54:7 and sensitivity profiles5 (A1) and 6 (A2) for EN 54:5.092k/01BasesZP7-SB1 Standard baseASBE-2 Standard baseUTC Fire & Security Inc. Trading as Edwards Systems Technology8985 Town Center Parkway, Bradenton, Florida FL34202, USATel: 941 739-42228Website: www.fs.utc.comCertificate No: 262s-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003Multi-Criteria DetectorsCertificated ProductsSIGA-IPHSISIGA-PHSIIntelligent analogue addressable thermally enhanced photoelectric and ionisation smokedetector(SIGI-IBS, SIGA-SB, SIGA-SB4, SIGA-RB, SIGA-RB4,SIGA-IB, SIGA-IB4 & SIGA-AB4G bases)Notes:1. Meets the requirements of EN 54-7:2000 at sensitivitysettings 1.0%/ft, 2%/ft, 2.5%/ft, 3%/ft, and 3.5%/ft.2. The SIGA-LED indicator is approved for use withthe SIGA-SB and SIGA-SB4 basesIntelligent analogue addressable thermally enhanced photoelectric smoke detector(SIGI-IBS, SIGA-SB, SIGA-SB4, SIGA-RB, SIGA-RB4,SIGA-IB, SIGA-IB4 and SIGA-AB4G bases)Notes:1. Meets the requirements of EN 54-7:2000 at sensitivitysettings 1.0%/ft, 2%/ft, 2.5%/ft, 3%/ft, and 3.5%/ft.LPCB Ref.No.262s/01262s/0218 Jan 2014 301

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated Products2. The SIGA-LED indicator is approved for use withthe SIGA-SB and SIGA-SB4 basesLPCB Ref.No.Bases:SIGI-IBSSIGA-SBSIGA-SB4SIGA-RBSIGA-RB4SIGA-IBSIGA-IB4SIGA-AB4GIsolator baseStandard baseStandard base with trim skirtRelay baseRelay base with trim skirtIsolator BaseIsolator base with 4 inch mounting adaptorsSounder baseAccessories:SIGA-LED IndicatorCertificate No: 262t-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006Point Smoke DetectorsCertificated ProductsSIGA-PSIIntelligent analogue addressable photoelectric smoke detector(SIGI-IBS, SIGA-SB, SIGA-SB4, SIGA-RB, SIGA-RB4,SIGA-IB, SIGA-IB4 and SIGA-AB4G bases)Notes:1. Meets the requirements of EN 54-7:2000 at sensitivitysettings 1.0%/ft, 2%/ft, 2.5%/ft, 3%/ft, and 3.5%/ft.2. The SIGA-LED indicator is approved for use withthe SIGA-SB and SIGA-SB4 basesLPCB Ref.No.262t/02Bases:SIGI-IBSSIGA-SBSIGA-SB4SIGA-RBSIGA-RB4SIGA-IBSIGA-IB4SIGA-AB4GIsolator baseStandard baseStandard base with trim skirtRelay baseRelay base with trim skirtIsolator BaseIsolator base with 4 inch mounting adaptorsSounder baseAccessories:SIGA-LED IndicatorCertificate No: 262u-(cl-1) to EN 54-5: 2000 + A1: 2002.Point Heat DetectorsCertificated ProductsSIGA-HRSIIntelligent analogue addressable Class A1 & A2R rate of rise heat detector(SIGI-IBS, SIGA-SB, SIGA-SB4, SIGA-RB, SIGA-RB4,SIGA-IB,SIGA-IB4 and SIGA-AB4G bases)Note:1. The SIGA-LED indicator is also approved for use withthe SIGA-SB and SIGA-SB4 basesLPCB Ref.No.262u/02Bases:SIGI-IBSSIGA-SBSIGA-SB4SIGA-RBSIGA-RB4SIGA-IBSIGA-IB4SIGA-AB4GIsolator baseStandard baseStandard base with trim skirtRelay baseRelay base with trim skirtIsolator BaseIsolator base with 4 inch mounting adaptorsSounder baseAccessories:SIGA-LED Indicator302 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSVRC Terofire ProductsLion House, Lion Street, Congleton, Cheshire CW12 4BH, United KingdomTel: +44 (0)1260 297578 • Fax: +44 (0)1260 290078E-mail: sales@terofire.comCertificate No: 512d to EN 54-5: 2000 + A1: 2002Point Heat DetectorsCertificated Products10-0003 Conventional 2 wire 24VDC class A2S fixed temperature and rate-of-rise heat detectorwith LED output (P/N854001 base)10-0003 Conventional 2 wire 24VDC class A2R fixed temperature and rate-of-rise heat detectorwith LED output (P/N854001 base)LPCB Ref.No.512d/03512d/04Bases:P/N854001 4-Wire detector baseCertificate No: 512a to EN 54-7: 2000 + A1: 2002 + A2: 2006Point Smoke DetectorsCertificated Products10-0001 Conventional 2 wire photoelectric smoke detector with remote LED output (P/N854001base)LPCB Ref.No.512a/02BaseP/N854001 4-Wire detector baseCertificate No: 512b to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003Multi-Criteria DetectorsCertificated Products10-0002 Conventional 2 wire photoelectric smoke and heat detector with remote LED output(P/N854001 base)LPCB Ref.No.512b/02BaseP/N854001 4-Wire detector baseWagner Group GmbHSchleswigstraße 5, D-30853 Langenhagen, GermanyTel: +49 511 97383 0 • Fax: +49 511 73338 6E-mail: info@wagner.de • Website: www.wagner.deCertificate No: 524c to EN 54-20: 2006Aspirating Smoke DetectorsCertificated ProductsLPCB Ref.No.TITANUS PRO-SENS 524c/01Notes:1. Approval of the detector is conditional upon the following requirements:For compliance with Clause 5.10 of EN 54-20: 2006, the detector shall besupplied with power from a power supply conforming to the requirements of EN54-4.System design, installation and commissioning shall be performed inaccordance with the manufacturer’s installation guide, associated manuals and18 Jan 2014 303

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated Productsdesign software TF-SC-1. The detector shall be installed with sampling pipe conforming to EN 61386-1,to at least Class 1131.2. Approved detector configurations (Class A, Class B and Class C): TP-1/a (standard version, no bargraph display, 1 alarm, not available fornetworking) TP-1-F/a (deep freeze version, no bargraph display, 1 alarm, not available fornetworking ) TP-1-SL (silent version, no bargraph display, 1 alarm, not available fornetworking)LPCB Ref.No.3. The approved detector must incorporate one or two of the following detectormodules: DM-TP-01-L (standard version, sensitivity of 0.015%/m) DM-TP-01-L-F (deep freeze version, sensitivity of 0.015%/m) DM-TP-10-L (standard version, sensitivity of 0.10%/m) DM-TP-10-L-F (deep freeze version, sensitivity of 0.10%/m) DM-TP-50-L (standard version, sensitivity of 0.50%/m) DM-TP-50-L-F (deep freeze version, sensitivity of 0.50%/m)TITANUS PRO-SENS/net 524c/02Notes:1. Approval of the detector is conditional upon the following requirements: For compliance with Clause 5.10 of EN 54-20: 2006, the detector shall besupplied with power from a power supply conforming to the requirements of EN54-4. System design, installation and commissioning shall be performed inaccordance with the manufacturer’s installation guide, associated manuals anddesign software TF-SC-1. The detector shall be installed with sampling pipe conforming to EN 61386-1,to at least Class 1131.2. Approved detector configurations (Class A, Class B and Class C): TP-3 (standard version, no bargraph display, 1 alarm, prepared for networking) TP-3-F (deep freeze version, no bargraph display, 1 alarm, prepared fornetworking) TP-3-SL (silent version, no bargraph display, 1 alarm, prepared for networking) TP-4 (standard version, no bargraph display, 2 alarms, prepared fornetworking) TP-4-F (deep freeze version, no bargraph display, 2 alarms, prepared fornetworking) TP-4-SL (silent version, no bargraph display, 2 alarms, prepared fornetworking) TP-5 (standard version, no bargraph display, 3 alarms, prepared fornetworking) TP-5-F (deep freeze version, no bargraph display, 3 alarms, prepared fornetworking) TP-5-SL (silent version, no bargraph display, 3 alarms, prepared fornetworking)3 The approved detector must incorporate one or two of the following detectormodules: DM-TT-01-L (standard version, sensitivity of 0.015%/m) DM-TT-01-L-F (deep freeze version, sensitivity of 0.015%/m) DM-TT-10-L (standard version, sensitivity of 0.10%/m) DM-TT-10-L-F (deep freeze version, sensitivity of 0.10%/m) DM-TT-50-L (standard version, sensitivity of 0.50%/m) DM-TT-50-L-F (deep freeze version, sensitivity of 0.50%/m)TITANUS TOP-SENS 524c/03Notes:1. Approval of the detector is conditional upon the following requirements: For compliance with Clause 5.10 of EN 54-20: 2006, the detector shall besupplied with power from a power supply conforming to the requirements of EN54-4. System design, installation and commissioning shall be performed inaccordance with the manufacturer’s installation guide, associated manuals anddesign software TF-SC-1. The detector shall be installed with sampling pipe conforming to EN 61386-1,to at least Class 1131.304 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated Products2. Approved detector configurations (Class A, Class B and Class C): TT-1/a (standard version, bargraph display, 3 alarms, prepared for networking) TT-1-F/a (deep freeze version, bargraph display, 3 alarms, prepared fornetworking) TT-1-SL (silent version, bargraph display, 3 alarms, prepared for networking)LPCB Ref.No.3. The approved detector must incorporate one or two of the following detectormodules: DM-TT-01-L (standard version, sensitivity of 0.015%/m) DM-TT-01-L-F (deep freeze version, sensitivity of 0.015%/m) DM-TT-10-L (standard version, sensitivity of 0.10%/m) DM-TT-10-L-F (deep freeze version, sensitivity of 0.10%/m) DM-TT-50-L (standard version, sensitivity of 0.50%/m) DM-TT-50-L-F (deep freeze version, sensitivity of 0.50%/m)TITANUS MICRO-SENS 524c/04Notes:1. Approval of the detector is conditional upon the following requirements: For compliance with Clause 5.10 of EN 54-20: 2006, the detector shall besupplied with power from a power supply conforming to the requirements of EN54-4. System design, installation and commissioning shall be performed inaccordance with the manufacturer’s installation guide, associated manuals anddesign software TF-SC-1. The detector shall be installed with sampling pipe conforming to EN 61386-1,to at least Class 1131.2. Approved detector configurations, sensitivity of 0.10%/m (Class A, Class B andClass C): DM-TM-10 (standard version) DM-TM-R-10 (version with ROOM IDENT) DM-TM-B-10 (version with bargraph display) DM-TM-RB-10 (version with ROOM IDENT, bargraph display) DM-TM-Z-10 (version with redundancy fan) DM-TM-ZB-10 (version with redundancy fan, bargraph display) DM-TM-10-F (deep freeze version) DM-TM-B-10-F (version with bargraph display, deep freeze) DM-TMV-10 (version with 2 stages of alarm) DM-TMV-R-10 (version with 2 stages of alarm, ROOM IDENT) DM-TMV-B-10 (version with 2 stages of alarm, bargraph display) DM-TMV-RB-10 (version with 2 stages of alarm, ROOM IDENT, bargraphdisplay) DM-TMV-10-F (version with 2 stages of alarm, deep freeze) DM-TMV-B-10-F (version with 2 stages of alarm, bargraph display, deepfreeze) DM-MB-TM-10 (version without fan to be used as detector box) DM-MB-TM-B-10 (version without fan to be used as detector box, bargraphdisplay)3. Approved detector configurations, sensitivity of 0.50%/m (Class A, Class B andClass C): DM-TM-50 (standard version) DM-TM-R-50 (version with ROOM IDENT) DM-TM-B-50 (version with bargraph display) DM-TM-RB-50 (version with ROOM IDENT, bargraph display) DM-TM-Z-50 (version with redundancy fan) DM-TM-ZB-50 (version with redundancy fan, bargraph display) DM-TM-50-F (deep freeze version) DM-TM-B-50-F (version with bargraph display, deep freeze) DM-TMV-50 (version with 2 stages of alarm) DM-TMV-R-50 (version with 2 stages of alarm, ROOM IDENT) DM-TMV-B-50 (version with 2 stages of alarm, bargraph display) DM-TMV-RB-50 (version with 2 stages of alarm, ROOM IDENT, bargraphdisplay) DM-TMV-50-F (version with 2 stages of alarm, deep freeze) DM-TMV-B-50-F (version with 2 stages of alarm, bargraph display, deepfreeze) DM-MB-TM-50 (version without fan to be used as detector box) DM-MB-TM-B-50 (version without fan to be used as detector box, bargraphdisplay)18 Jan 2014 305

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsLPCB Ref.No.TITANUS RACK-SENS 524c/05Notes:1. Approval of the detector is conditional upon the following requirements: For compliance with Clause 5.10 of EN 54-20: 2006, the detector shall besupplied with power from a power supply conforming to the requirements of EN54-4. System design, installation and commissioning shall be performed inaccordance with the manufacturer’s installation guide, associated manuals anddesign software TF-SC-1. The detector shall be installed with sampling pipe conforming to EN 61386-1,to at least Class 1131.2. Approved detector configurations (Class A, Class B and Class C): TR1-10 (placed in a ‘1U’ housing, sensitivity of 0.10%/m) TR1-50 (placed in a ‘1U’ housing, sensitivity of 0.50%/m) TR2-10 (placed in a ‘2U’ housing, sensitivity of 0.10%/m) TR2-50 (placed in a ‘2U’ housing, sensitivity of 0.50%/m)Xtralis Pty Limited4 North Drive, Virginia Park, 236-262 East Boundary Road, East Bentleigh, Victoria 3165, AustraliaTel: +61 3 9936 7001, +44 (0)1442 242330 • Fax: +61 3 9936 7201E-mail: marketing-emea@xtralis.com • Website: www.xtralis.comEuropean Operations at:Xtralis (UK) Limited, Vision House, Focus 31, Mark Road, Hemel Hempstead, Hertfordshire HP2 7BW, UnitedKingdomTel: +44 (0)1442 242330 • Fax: +44 (0)1442 249327Certificate No: 305e to EN 54-20: 2006Certificate No: 305d to EN 54-20: 2006Certificate No: 305g to EN 54-20: 2006Aspirating Smoke DetectorsCertificated ProductsVESDA VLF-250-xx (VLF-250-01NF*) high sensitivityaspirating smoke detectorIncorporating the following ancillary equipment:- VIC-010 VESDAnet network card- VIC-020 Multifunction control card- VIC-030 Multifunction control card- VRT-V00 Remote VLF display (with 7 relays)- VRT-W00 Remote VLF display (no relays)- VRT-500 Remote relay unit (with 7 relays)Notes:1. For compliance with clause 5.10 of EN 54-20 the detector shall be suppliedwith power from a power supply conforming to the requirements of EN 54-4.2. The device is approved for sensitivity Classes A, B and C. The Class of anypipe/hole configuration and detector sensitivity must be determined usingASPIRE2.3. System design, installation and commissioning shall be performed inaccordance with the VESDA VLF product guide (07208).4. Remote display, programmer and relay modules are also approved in a 19sub rack.5. The detector is also approved when used with in-line filter models,E700-FILASSY and VSP-850 in accordance with the appropriateVESDA application guide (10856 or 17785).6. xx denotes alternative language version where xx (range 00 to 99)designates the language of the product labels.7. Alternative model number with suffix* as indicated, intended for Frenchmarket.8. When installing pipework systems containing in-line components, guidancefrom the 18336 "Xtralis Open-flow In-Line Components" document shall beLPCB Ref.No.305d/01306 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsVESDA VLF-500-xx (VLF-500-01NF*) high sensitivityaspirating smoke detectorVESDA VLC Highsensitivity aspirating smokedetectorVESDA VLP Highsensitivity aspirating smokedetectorsought and the recommendations followed.Incorporating the following ancillary equipment:- VIC-010 VESDAnet network card- VIC-020 Multifunction control card- VIC-030 Multifunction control card- VRT-V00 Remote VLF display (with 7 relays)- VRT-W00 Remote VLF display (no relays)- VRT-500 Remote relay unit (with 7 relays)Notes:1. For compliance with clause 5.10 of EN 54-20 the detector shall be suppliedwith power from a power supply conforming to the requirements of EN 54-4.2. The device is approved for sensitivity Classes A, B and C. The Class of anypipe/hole configuration and detector sensitivity must be determined usingASPIRE2.3. System design, installation and commissioning shall be performed inaccordance with the VESDA VLF product guide (07209).4. Remote display, programmer and relay modules are also approved in a 19sub rack.5. The detector is also approved when used with in-line filter models,E700-FILASSY and VSP-850 in accordance with the appropriateVESDA application guide (10856 or 17785).6. xx denotes alternative language version where xx (range 00 to 99)designates the language of the product labels.7. Alternative model number with suffix* as indicated, intended for Frenchmarket.8. When installing pipework systems containing in-line components, guidancefrom the 18336 "Xtralis Open-flow In-Line Components" document shall besought and the recommendations followed.Approved configurations:- VLC-500 (VLF-50000-NF*) VLC Relays only (RO) version- VLC-505 (VLF-50500-NF*) VLC VESDAnet (VN) version- VLC-400 (VLF-400-NF*) VLC Apollo (AP) version- VLC-700 (801519.F0*) VLC Esser (EB) version- VLC-800 (VLF-800-NF*) VLC Tyco (MX) versionApproved remote units with the VLC-505 VESDAnet (VN) version:- VRT-J00 Remote VLC display (with 7 relays)- VRT-K00 Remote VLC display (no relays)- VRT-500 Remote relay unit (with 7 relays)Notes:1. For compliance with clause 5.10 of EN 54-20 the detector shall be suppliedwith power from a power supply conforming to the requirements of EN 54-4.2. The device is approved for sensitivity Classes A, B and C. The Class of anypipe/hole configuration and detector sensitivity must be determined usingASPIRE2.3. System design, installation and commissioning shall be performed inaccordance with the VESDA VLC product guides(10280 [VLC-500 & VLC-505], 03494 [VLC-400], 09411 [VLC-700],09515 [VLC-800]).4. Remote display, programmer and relay modules are also approved in a 19sub rack.5. The detector is also approved when used with in-line filter models,E700-FILASSY and VSP-850 in accordance with the appropriate VESDAapplication guide (10856 or 17785).6. Alternative model numbers with suffix* as indicated, intended for Frenchmarket.7. When installing pipework systems containing in-line components, guidancefrom the 18336 "Xtralis Open-flow In-Line Components" document shall besought and the recommendations followed.Approved Configurations:VLP-012 (VLP-01200-NF*) VLP detector with Display & ProgrammerVLP-002 (VLP-00200-NF*) VLP detector with DisplayVLP-400 (VLP-00000-NF*) VLP detector with Fire/OK LEDs onlyVLP-401 (VLP-00100-NF*) VLP detector with Programmer & Fire/OK LEDsVLP-100 VLP detector with OEM coverApproved remote units:VRT-100 Remote ProgrammerVRT-200 Remote VLP Display unit (with 7 relays)VRT-300 VESDAnet socketVRT-500 Remote Relay unit (with 7 relays)VRT-600 Remote VLP Display unit (without relays)Notes:1. For compliance with clause 5.10 of EN 54-20 the detector shall be suppliedLPCB Ref.No.305d/02305d/03305d/0418 Jan 2014 307

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsVESDA VLS Highsensitivity aspirating smokedetectorVESDA VLF-250-xx (VLF-250-01NF*) high sensitivityaspirating smoke detectorwith power from a power supply conforming to the requirements of EN 54-4.2. The device is approved for sensitivity Classes A, B and C. The Class of anypipe/hole configuration and detector sensitivity must be determined usingASPIRE2.3. System design, installation and commissioning shall be performed inaccordance with the VESDA VLP product guide (10278).4. Remote display, programmer and relay modules are also approved in a19 sub rack.5. The detector is also approved when used with in-line filter models,E700-FILASSY and VSP-850 in accordance with the appropriateVESDA application guide (10856 or 17785).6. Alternative model numbers with suffix* as indicated, intended for Frenchmarket.7. When installing pipework systems containing in-line components, guidancefrom the 18336 "Xtralis Open-flow In-Line Components" document shall besought and the recommendations followed.Approved Configurations:VLS-600 (VLS-20000-NF*) VLS with 7 relays and Fire/OK LEDsVLS-204 (VLS-20400-NF*) VLS with 7 Relays and Display ModuleVLS-214 (VLS-21400-NF*) VLS with 7 Relays, Display and Program ModuleVLS-700 (VLS-30000-NF*) VLS with 12 relays and Fire/OK LEDsVLS-304 (VLS-30400-NF*) VLS with 12 Relays and Display ModuleVLS-314 (VLS-31400-NF*) VLS with 12 Relays, Display and Program ModuleVLS-100 VLS with 7 Relays and OEM coverVLS-500 VLS with 12 Relays and OEM coverApproved Remote Units:VRT-400 Remote Scanner Display with 7 relaysVRT-700 Remote Scanner Display with no relaysVRT-800 Remote Scanner Display with 12 relaysVRT-900 Remote Scanner Relays -12 relaysVRT-E00 Remote Scanner Relays - 7 relaysNotes:1. For compliance with clause 5.10 of EN 54-20 the detector shall be suppliedwith power from a power supply conforming to the requirements of EN 54-4.2. The device is approved for sensitivity Classes A, B and C. The Class of anypipe/hole configuration and detector sensitivity must be determined usingASPIRE2.3. System design, installation and commissioning shall be performed inaccordance with the VESDA VLS product guide (10279).4. Remote display, programmer and relay modules are also approved in a 19sub rack.5. The detector is also approved when used with in-line filter models,E700-FILASSY and VSP-850 in accordance with the appropriateVESDA application guide (10856 or 17785).6. Alternative model numbers with suffix* as indicated, intended for Frenchmarket.7. When installing pipework systems containing in-line components, guidancefrom the 18336 "Xtralis Open-flow In-Line Components" document shall besought and the recommendations followedIncorporating the following ancillary equipment:- VIC-010 VESDAnet network card- VIC-020 Multifunction control card- VIC-030 Multifunction control card- VRT-V00 Remote VLF display (with 7 relays)- VRT-W00 Remote VLF display (no relays)- VRT-500 Remote relay unit (with 7 relays)Notes:1. For compliance with clause 5.10 of EN 54-20 the detector shall be suppliedwith power from a power supply conforming to the requirements of EN 54-4.2. The device is approved for sensitivity Classes A, B and C. The Class of anypipe/hole configuration and detector sensitivity must be determined usingASPIRE2.3. System design, installation and commissioning shall be performed inaccordance with the VESDA VLF product guide (07208).4. Remote display, programmer and relay modules are also approved in a 19sub rack.5. The detector is also approved when used with in-line filter models,E700-FILASSY and VSP-850 in accordance with the appropriateVESDA application guide (10856 or 17785).6. xx denotes alternative language version where xx (range 00 to 99)designates the language of the product labels.7. Alternative model number with suffix* as indicated, intended for FrenchLPCB Ref.No.305d/05305d/06308 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsVESDA VLF-500-xx (VLF-500-01NF*) high sensitivityaspirating smoke detectorVESDA VLC Highsensitivity aspirating smokedetectorVESDA VLP Highsensitivity aspirating smokedetectormarket.8. When installing pipework systems containing in-line components, guidancefrom the 18336 "Xtralis Open-flow In-Line Components" document shall besought and the recommendations followed.Incorporating the following ancillary equipment:- VIC-010 VESDAnet network card- VIC-020 Multifunction control card- VIC-030 Multifunction control card- VRT-V00 Remote VLF display (with 7 relays)- VRT-W00 Remote VLF display (no relays)- VRT-500 Remote relay unit (with 7 relays)Notes:1. For compliance with clause 5.10 of EN 54-20 the detector shall be suppliedwith power from a power supply conforming to the requirements of EN 54-4.2. The device is approved for sensitivity Classes A, B and C. The Class of anypipe/hole configuration and detector sensitivity must be determined usingASPIRE2.3. System design, installation and commissioning shall be performed inaccordance with the VESDA VLF product guide (07209).4. Remote display, programmer and relay modules are also approved in a 19sub rack.5. The detector is also approved when used with in-line filter models,E700-FILASSY and VSP-850 in accordance with the appropriateVESDA application guide (10856 or 17785).6. xx denotes alternative language version where xx (range 00 to 99)designates the language of the product labels.7. Alternative model number with suffix* as indicated, intended for Frenchmarket.8. When installing pipework systems containing in-line components, guidancefrom the 18336 "Xtralis Open-flow In-Line Components" document shall besought and the recommendations followed.Approved configurations:- VLC-500 (VLF-50000-NF*) VLC Relays only (RO) version- VLC-505 (VLF-50500-NF*) VLC VESDAnet (VN) version- VLC-400 (VLF-400-NF*) VLC Apollo (AP) version- VLC-700 (801519.F0*) VLC Esser (EB) version- VLC-800 (VLF-800-NF*) VLC Tyco (MX) versionApproved remote units with the VLC-505 VESDAnet (VN) version:- VRT-J00 Remote VLC display (with 7 relays)- VRT-K00 Remote VLC display (no relays)- VRT-500 Remote relay unit (with 7 relays)Notes:1. For compliance with clause 5.10 of EN 54-20 the detector shall be suppliedwith power from a power supply conforming to the requirements of EN 54-4.2. The device is approved for sensitivity Classes A, B and C. The Class of anypipe/hole configuration and detector sensitivity must be determined usingASPIRE2.3. System design, installation and commissioning shall be performed inaccordance with the VESDA VLC product guides(10280 [VLC-500 & VLC-505], 03494 [VLC-400], 09411 [VLC-700],09515 [VLC-800]).4. Remote display, programmer and relay modules are also approved in a 19sub rack.5. The detector is also approved when used with in-line filter models,E700-FILASSY and VSP-850 in accordance with the appropriate VESDAapplication guide (10856 or 17785).6. Alternative model numbers with suffix* as indicated, intended for Frenchmarket.7. When installing pipework systems containing in-line components, guidancefrom the 18336 "Xtralis Open-flow In-Line Components" document shall besought and the recommendations followed.Approved Configurations:VLP-012 (VLP-01200-NF*) VLP detector with Display & ProgrammerVLP-002 (VLP-00200-NF*) VLP detector with DisplayVLP-400 (VLP-00000-NF*) VLP detector with Fire/OK LEDs onlyVLP-401 (VLP-00100-NF*) VLP detector with Programmer & Fire/OK LEDsVLP-100 VLP detector with OEM coverApproved remote units:VRT-100 Remote ProgrammerVRT-200 Remote VLP Display unit (with 7 relays)VRT-300 VESDAnet socketVRT-500 Remote Relay unit (with 7 relays)LPCB Ref.No.305d/07305d/08305d/0918 Jan 2014 309

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsVESDA VLS Highsensitivity aspirating smokedetectorVRT-600 Remote VLP Display unit (without relays)Notes:1. For compliance with clause 5.10 of EN 54-20 the detector shall be suppliedwith power from a power supply conforming to the requirements of EN 54-4.2. The device is approved for sensitivity Classes A, B and C. The Class of anypipe/hole configuration and detector sensitivity must be determined usingASPIRE2.3. System design, installation and commissioning shall be performed inaccordance with the VESDA VLP product guide (10278).4. Remote display, programmer and relay modules are also approved in a19 sub rack.5. The detector is also approved when used with in-line filter models,E700-FILASSY and VSP-850 in accordance with the appropriateVESDA application guide (10856 or 17785).6. Alternative model numbers with suffix* as indicated, intended for Frenchmarket.7. When installing pipework systems containing in-line components, guidancefrom the 18336 "Xtralis Open-flow In-Line Components" document shall besought and the recommendations followed.Approved Configurations:VLS-600 (VLS-20000-NF*) VLS with 7 relays and Fire/OK LEDsVLS-204 (VLS-20400-NF*) VLS with 7 Relays and Display ModuleVLS-214 (VLS-21400-NF*) VLS with 7 Relays, Display and Program ModuleVLS-700 (VLS-30000-NF*) VLS with 12 relays and Fire/OK LEDsVLS-304 (VLS-30400-NF*) VLS with 12 Relays and Display ModuleVLS-314 (VLS-31400-NF*) VLS with 12 Relays, Display and Program ModuleVLS-100 VLS with 7 Relays and OEM coverVLS-500 VLS with 12 Relays and OEM coverApproved Remote Units:VRT-400 Remote Scanner Display with 7 relaysVRT-700 Remote Scanner Display with no relaysVRT-800 Remote Scanner Display with 12 relaysVRT-900 Remote Scanner Relays -12 relaysLPCB Ref.No.305d/10VRT-E00 Remote Scanner Relays - 7 relaysNotes:1. For compliance with clause 5.10 of EN 54-20 the detector shall be suppliedwith power from a power supply conforming to the requirements of EN 54-4.2. The device is approved for sensitivity Classes A, B and C. The Class of anypipe/hole configuration and detector sensitivity must be determined usingASPIRE2.3. System design, installation and commissioning shall be performed inaccordance with the VESDA VLS product guide (10279).4. Remote display, programmer and relay modules are also approved in a 19sub rack.5. The detector is also approved when used with in-line filter models,E700-FILASSY and VSP-850 in accordance with the appropriateVESDA application guide (10856 or 17785).6. Alternative model numbers with suffix* as indicated, intended for Frenchmarket.7. When installing pipework systems containing in-line components, guidancefrom the 18336 "Xtralis Open-flow In-Line Components" document shall besought and the recommendations followedXCC-010 (XCC-01000-NF) Xtralis Class C aspirating smoke detector 305e/01Notes:1. For compliance with clause 5.10 of EN 54-20 the detector shall be suppliedwith power from a power supply conforming with the requirements of EN 54-4.2. System design, installation and commissioning shall be performed inaccordance with the Xtralis Class C XCC-010 product guide (Document 14159).3. The device is approved for sensitivity Class C.4. The detector is also approved when used with in-line filter models,E700-FILASSY and VSP-850 in accordance with the appropriate VESDAapplication guide (10856 or 17785).5. When installing pipework systems containing in-line components, guidancefrom the 18336 "Xtralis Open-flow In-Line Components" document shall besought and the recommendations followed.6. XCC-01000-NF alternative model number intended for French market.XCC-010 (XCC-01000-NF) Xtralis Class C aspirating smoke detector 305e/02Notes:1. For compliance with clause 5.10 of EN 54-20 the detector shall be suppliedwith power from a power supply conforming with the requirements of EN 54-4.2. System design, installation and commissioning shall be performed inaccordance with the Xtralis Class C XCC-010 product guide (Document 14159).310 18 Jan 2014

Certificated ProductsPART 1: SECTION 4.1COMMERCIAL DETECTORSLPCB Ref.No.3. The device is approved for sensitivity Class C.4. The detector is also approved when used with in-line filter models,E700-FILASSY and VSP-850 in accordance with the appropriate VESDAapplication guide (10856 or 17785).5. When installing pipework systems containing in-line components, guidancefrom the 18336 "Xtralis Open-flow In-Line Components" document shall besought and the recommendations followed.6. XCC-01000-NF alternative model number intended for French market.XCC-011 (XCC-01100-NF) Xtralis Class C aspirating smoke detector 305e/03Notes:1. For compliance with clause 5.10 of EN 54-20 the detector shall be suppliedwith power from a power supply conforming with the requirements of EN 54-4.2. System design, installation and commissioning shall be performed inaccordance with the Xtralis Class C XCC-011 product guide (Document 19137).3. The device is approved for sensitivity Class C.4. The detector is also approved when used with in-line filter models,E700-FILASSY and VSP-850 in accordance with the appropriate VESDAapplication guide (10856 or 17785).5. When installing pipework systems containing in-line components, guidancefrom the 18336 "Xtralis Open-flow In-Line Components" document shall besought and the recommendations followed.6. XCC-01100-NF alternative model number intended for French market.XCC-011 (XCC-01100-NF) Xtralis Class C aspirating smoke detector 305e/04Notes:1. For compliance with clause 5.10 of EN 54-20 the detector shall be suppliedwith power from a power supply conforming with the requirements of EN 54-4.2. System design, installation and commissioning shall be performed inaccordance with the Xtralis Class C XCC-011 product guide (Document 19137).3. The device is approved for sensitivity Class C.4. The detector is also approved when used with in-line filter models,E700-FILASSY and VSP-850 in accordance with the appropriate VESDAapplication guide (10856 or 17785).5. When installing pipework systems containing in-line components, guidancefrom the 18336 "Xtralis Open-flow In-Line Components" document shall besought and the recommendations followed.6. XCC-01100-NF alternative model number intended for French market.VLI-880 (VLI-88000-NF) VESDA Laser Industrial aspirating smoke detector305g/01Incorporating the following ancillary equipment:- VRT-Q00 Remote VLI display (with 7 relays)- VRT-T00 Remote VLI display (no relays)- VRT-500 Remote relay unit (with 7 relays)Notes:1.For compliance with clause 5.10 of EN 54-20 the detector shall be suppliedwith power from a power supply conforming to the requirements of EN 54-4.2.The device is approved for sensitivity Classes A, B and C.The Class of any pipe/hole configuration and detector sensitivity must bedetermined using ASPIRE2.3.System design, installation and commissioning shall be performed inaccordance with the VESDA VLI product guide (18500).4.Remote display, programmer and relay modules are also approved in a 19 sub rack.5.The detector is also approved when used with in-line filter models,E700-FILASSY and VSP-850 in accordance with the appropriate VESDA applicationguide(10856 or 17785).6. VLI-88000-NF is the alternative model number intended for French market.7.When installing pipework systems containing in-line components, guidance from the18336Open-flow In-Line Components" document shall be sought and the recommendationsfollowed.VLI-885 (VLI-88500-NF) VESDA Laser Industrial aspirating smoke detector with VESDAnetcard305g/02Incorporating the following ancillary equipment:- VRT-Q00 Remote VLI display (with 7 relays)- VRT-T00 Remote VLI display (no relays)- VRT-500 Remote relay unit (with 7 relays)Notes:1.For compliance with clause 5.10 of EN 54-20 the detector shall be suppliedwith power from a power supply conforming to the requirements of EN 54-4.2.The device is approved for sensitivity Classes A, B and C. The Class of any pipe/holeconfiguration and detector sensitivity must be determined using ASPIRE2.18 Jan 2014 311

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated Products3.System design, installation and commissioning shall be performed inaccordance with the VESDA VLI product guide (18500).4.Remote display, programmer and relay modules are also approved in a 19 sub rack.5.The detector is also approved when used with in-line filter models,E700-FILASSY and VSP-850 in accordance with the appropriate VESDA applicationguide(10856 or 17785).6. VLI-88500-NF alternative model number intended for French market.7 .When installing pipework systems containing in-line components, guidance from the18336Open-flow In-Line Components" document shall be sought and the recommendationsfollowed.LPCB Ref.No.Accessories:E700-FILASSYVSP-850In line filterIn line filterZeta Alarm Systems by GLT Exports LimitedDetection House, 72-78 Morfa Road, Swansea SA1 2EN, United KingdomTel: +44 (0)1792 455175 • Fax: +44 (0)1792 455176E-mail: ghassan@gltexports.com • Website: www.gltexports.comCertificate No: 010v to EN 54-7: 2000 + A1: 2002 + A2: 2006Certificate No: 330n to EN54-7: 2000 + A1: 2002 + A2: 2006Point Smoke DetectorsCertificated ProductsLPCB Ref.No.80-120 Fyreye FEAO2000 Analogue addressable optical smoke detector (80-50, 80-080, 80-090 mounting bases) 010v/02MKII-OPFyreye II Conventional optical smoke detector(FE-CB/D base, FE-CB/S base and FE-CB base)Note:1. Meets the requirements of EN 54-7:2000 at Smoke Sensitivity settingRange:0.08%dB~ 0.12%dB330n/01MKII-AOPBases:80-050 FE CB Common mounting base80-052 FE DB Diode mounting base80-054 FE RB Relay mounting base80-080 FEA RB Addressable relay mounting base80-090 FE IB Negative switching isolating baseFE-CB/D deep baseFE-CB/S shallow baseFE-CB standard baseFyreye II Addressable optical smoke detectorMKII-CB/D base and MKII-CB base)Note:1) Meets the requirements of EN 54-7:2000 at Smoke Sensitivity settingRange:0.09%dB~ 0.11%dB330n/02Certificate No: 010u to EN 54-5: 2000 + A1: 2002Certificate No: 330q to EN54-5: 2000 + A1: 2002Point Heat DetectorsCertificated ProductsLPCB Ref.No.Conventional Class BR heat detector (80-050,80-052,80-054 mounting bases) 010u/0280-032 FyreyeFEHBR200080-040 Fyreye FEFH2000 Conventional Class C heat detector (80-50, 80-052, 80-054 mounting bases) 010u/0380-130 Fryeye FEAH2000 Analogue addressable Class A2S heat detector (80-50, 80-080, 80-090 mounting bases) 010u/0480-131 Fyreye Analogue addressable Class CS heat detector (80-50, 80-080, 80-090 mounting bases) 010u/05312 18 Jan 2014

PART 1: SECTION 4.1COMMERCIAL DETECTORSCertificated ProductsFEAHH2000MKII-HFMKII-HRMKII-AHFMKII-AHRFyreye II Conventional A2S heat detector(FE-CB/D base, FE-CB/S base and FE-CB base)Note:1. Meets the requirements of EN 54-5:2000 at Class A2SFyreye II Conventional A2R heat detector(FE-CB/D base, FE-CB/S base and FE-CB base)Note:1. Meets the requirements of EN 54-5:2000 at Class A2RFyreye II Addressable A2S heat detectorMKII-CB/D base and MKII-CB base)Note:1) Meets the requirements of EN 54-5:2000 at Class A2SFyreye II Addressable A1R heat detectorMKII-CB/D base and MKII-CB base)Note:1) Meets the requirements of EN 54-5:2000 at Class A1RLPCB Ref.No.330q/01330q/02330q/03330q/04Bases:80-050 FE CB Common mounting base80-052 FE DB Diode mounting base80-054 FE RB Relay mounting base80-080 FEA RB Addressable relay mounting base80-090 FE IB Negative switching isolating baseFE-CB/D deep baseFE-CB/S shallow baseFE-CB standard baseCertificate No: 330p to EN54-5: 2000 + A1: 2002, EN54-7: 2000 + A1: 2002 + A2: 2006, CEA 4021: 2003Multi-Sensor/Multi-Criteria DetectorsCertificated ProductsMKII-OHMKII-AOHFyreye II Conventional optical and heat detector(FE-CB/D base, FE-CB/S base and FE-CB base)Note:1. Meets the requirements of EN 54-7:2000 at Smoke Sensitivity settingRange:0.08%dB~ 0.12%dB2. Meets the requirements of EN 54-5:2000 at Class A2Fyreye II Addressable optical and heat detectorMKII-CB/D base and MKII-CB base)Notes:1) Meets the requirements of EN 54-7:2000 at Smoke Sensitivity settingRange:0.09%dB~ 0.12%dB2) Meets the requirements of EN 54-5:2000 at Class A1LPCB Ref.No.330p/01330p/02BasesFE-CB/D deep baseFE-CB/S shallow baseFE-CB standard base18 Jan 2014 313

PART 1: SECTION 4.2DOMESTIC ALARMS - SMOKE, HEAT AND CARBON MONOXIDEStatistics show that Government initiatives, which have increased the amount of self-contained smoke alarmsfitted in domestic dwellings, have had a significant impact in reducing the amount of deaths and injuriescaused by fire in the UK.In Section 1: Fire detection and fire alarm systems of the Building Regulations 2010, Document B1 Fire Safetyin Dwellings it states that “All new dwelling houses shall be provided with a fire detection and fire alarmsystem in accordance with the relevant recommendations of BS 5839-6: 2004 to at least a Grade D, CategoryLD3 standard”BS 5839-6: 2004 Grade D requires a system of one or more mains-powered smoke alarms each with anintegral standby supply (i.e. battery back-up). The system may in addition incorporate one or more mainspowered heat alarms, each with an integral standby supply.LPCB’s list of approved products in this section is intended to help you select equipment that complies withthese regulatory requirements. The initial approval and continued approval processes of these types ofdetectors are outlined in scheme document SD078.Products listed in this section have been approved to: BS 5446-1: 2000 Fire detection and fire alarm devices for dwellings Part 1 Specification for smokealarms BS 5446-2: 2003 Fire detection and fire alarm devices for dwellings Part 2 Specification for heatalarms BS 5446-3: 2005 Specification for smoke alarm kits for deaf and hard of hearing people EN 14604: 2005 Smoke alarm devices EN 50291: 2001 Electrical apparatus for the detection of Carbon monoxide in domestic premises -Test method and performance requirements EN 50291-1: 2010 Electrical apparatus for the detection of Carbon monoxide in domestic premises -Test method and performance requirements EN 50291-2: 2010 Electrical apparatus for the detection of Carbon monoxide in domestic premises -Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles andsimilar premises including recreational craft-Additional test method and performance requirements. LPS1282: Issue 1 Requirements and testing procedures for combined domestic smoke and carbonmonoxide detectors.For domestic applications, care needs to be taken over the correct choice of the type of detector, its siting andthe condition of batteries in order to maintain the alarm in accordance with the manufacturer’s requirements.Further guidance is available from LPCB if required.Audit:Regular product auditing and regular factory inspections are carried out by LPCB ensuring high manufacturingstandards and continued compliance with the applicable product standard.Note:1. EN 14604: 2005 supersedes BS 5446-1: 2000 which was withdrawn in July 2008. Information concerningthe date of withdrawal of conflicting standards in the foreword to EN 14604: 2005 is incorrect. The correctdata is given in the Foreword to the UK version of BS EN 14604: 2005 and gives the date of withdrawal ofBS 5446:1: 2000 as July 2008. However, EN 14604: 2005 is now a harmonised standard for theConstruction Products Directive and CE marking is required for most of the European market since 1August 2008. It is therefore recommended that detectors are certificated to EN 14604: 2005 as soon aspossible.2. EN 50291-1: 2010 supersedes EN 50291: 2001. Information concerning the date of withdrawal ofconflicting national standard is 15th April 2013 as stated in the forward of EN 50291-1: 2010.314 18 Jan 2014

PART 1: SECTION 4.2DOMESTIC ALARMS - SMOKE, HEAT AND CARBON MONOXIDEDigital Security Controls, a Division of Tyco Safety Products Canada Ltd3301 Langstaff Road, Concord, ON L4K 4L2, CanadaTel: (001) 905 760 3000 • Fax: (001) 905 760 3020E-mail: dnita@dsc.com • Website: www.dsc.comCertificate No: 1018a to EN 50291: 2001Carbon Monoxide AlarmsCertificated ProductsLPCB Ref.No.WS4913 Type B battery operated carbon monoxide alarm with integral 433.92MHz RF transmitter. 1018a/01Notes: 1) The functionality of the RF link is excluded from the scope of the certification.WS8913 Type B battery operated carbon monoxide alarm with Integral 868.35MHz RF transmitter. 1018a/02Notes: 1) The functionality of the RF link is excluded from the scope of the certification.Everday Technology Co. LimitedNo,.95., Sec. 2., Ligong 1 St. Road., Letzer Industrial Park, Yilan County 26841, Taiwan ROCTel: +886 3 990 6099 • Fax: +862 3 990 6029E-mail: alex.hsieh@everday.com • Website: www.everday.comCertificate No: 512h to EN 50291-1: 2010Carbon Monoxide AlarmsCertificated ProductsM333M333IM333RLType A battery operated carbon monoxide alarm(base mounting plate)Type A battery operated carbon monoxide alarm with interconnection function(base mounting plate)Type A battery operated carbon monoxide alarm with relay output(base mounting plate)LPCB Ref.No.512h/01512h/02512h/03Base:Base mounting plateEyston Company Ltd27 Zhen Tian South Road, Wei Xing Industrial Zone, Yan Tian, Feng Gang, Dongguan, Guangdong, ChinaTel: +852 25573135 • Fax: +852 28970249E-mail: tracylo@eyston.com • Website: www.eyston.comCertificate No: 679b to EN 14604: 2005Smoke AlarmCertificated ProductsLPCB Ref.No.SD-176H Battery operated ionisation smoke alarm with alarm silence feature 679b/01SD-170H Battery operated ionisation smoke alarm 679b/02SD-1982 9V Battery operated photoelectric smoke alarm with alarm silence feature 679b/03SD-1782 9V Battery operated ionisation smoke alarm with alarm silence feature 679b/04SD-196H Battery operated photoelectric smoke alarm with alarm silence feature 679b/0518 Jan 2014 315

PART 1: SECTION 4.2DOMESTIC ALARMS - SMOKE, HEAT AND CARBON MONOXIDEFireblitz Extinguisher LtdUnits 15/17 Manford Industrial Estate, Manor Road, Erith, Kent DA8 2AJ, United KingdomTel: +44 (0)1322 342238 • Fax: +44 (0)1322 331532E-mail: sales@fireblitz.co.uk • Website: www.fireblitz.co.ukCertificate No: 971a-(cl-2) to EN 14604: 2005Smoke AlarmsCertificated ProductsLPCB Ref.No.FireHawk FHB10 10 year batteryphotoelectric smoke alarm 971a/01FireHawk FHB10i 10 year batteryphotoelectric smoke alarm with interlink 971a/02FireHawk FH250BB Mains powered operated photoelectric smoke alarm with primary back-up battery 971a/03FireHawk FH250RB Mains powered operated photoelectric smoke alarm with rechargeable lithium back-up 971a/04batteryFireHawk FH250LB Mains powered operated photoelectric smoke alarm with longlife lithium back-up battery 971a/05Firesafe10 Sanderson Way, Marton, Blackpool FY4 4NB, United KingdomTel: 01253 699500 • Fax: 01253 699550E-mail: info@firesafe.co.uk • Website: www.firesafe.co.ukCertificate No: 971a-(cl-5) to EN14604: 2005Smoke AlarmsCertificated ProductsLPCB Ref.No.FRAOMB Mains powered operated photoelectric smoke alarm with primary back-up battery 971a/09FRAOMBLMains powered operated photoelectric smoke alarm with rechargeable lithium back-up 971a/10batteryGira Giersiepen Gmbh & Co. KGDahlienstrasse, D-42461 Radevormwald, GermanyTel: +49 (2195) 602-0 • Fax: +49 (2195) 602-339E-mail: info@gira.de • Website: www.gira.deCertificate No: 1025a-(cl-1) to EN 14604: 2005Smoke AlarmsCertificated ProductsLPCB Ref.No.2330 02 Battery operated photoelectric smoke alarm (replaceable battery) 1025a/01Note:1. The radio link functionality is not included within the scope of approval2334 02 Mains operated photoelectric smoke alarm 1025a/02Note:1. The radio link functionality is not included within the scope of approval316 18 Jan 2014

PART 1: SECTION 4.2DOMESTIC ALARMS - SMOKE, HEAT AND CARBON MONOXIDEJalo Helsinki Oy / Jalo LtdBetonimiehenkuja 3, Otaniemi, Espoo, FinlandTel: +358 40 5639280E-mail: info@jalohelsinki.fi • Website: www.jalohelsinki.fiCertificate No: 1050a-(cl-1) to EN 14604: 2005Smoke AlarmsCertificated ProductsLPCB Ref.No.Kupu J1-A 9v battery operated photoelectric smoke alarm with alarm silence feature 1050a/01Notes:1. Cover is mesh / fabric outer shell2. Colour Variants of the Cover:004 - Fabric Green006 - Fabric Pink008 - Fabric Brown009 - Fabric Grey010 - Fabric Graphite WhiteKupu J1-B 9v battery operated photoelectric smoke alarm with alarm silence feature 1050a/02Notes:1. Cover is metallic coating outer shell2. Colour Variant of the Cover: 011 - ChromeLento J2-A 9v battery operated photoelectric smoke alarm with alarm silence feature 1050a/03Notes:1. Cover is hawk moth shaped outer shell2. Colour Variants of the Cover:002 - Original Black003 - Original White004 - Original Grey006 - Original Pink012 - Stripe Green013 - Stripe RedJohn Lewis PartnershipC/o Sprue Safety Products Ltd, Vanguard Centre, Sir Williams Lyons Road, Coventry CV4 7EZ, UnitedKingdomTel: +44 (0) 2476 323232 • Fax: +44 (0) 2476 693610Certificate No: 651e to EN 14604: 2005 and LPS 1282 Issue 1.0Combined Smoke and Carbon Monoxide alarmsCertificated ProductsLPCB Ref.No.SCO5-JL Combination carbon monoxide and photoelectric smoke alarm 651e/01Kidde Finland OyTiilenpolttajankuja 6, 01720 Vantaa, FinlandTel: +358 9 615 87 235 • Fax: +358 9 615 87 285E-mail: antti.soininen@kidde.fi • Website: www.kidde.fiCertificate No: 904a-(cl-2) to EN 14604:2005Smoke AlarmCertificated ProductsLPCB Ref.No.0914N Replaceable 9V Battery operated ionization smoke alarm 904a/0218 Jan 2014 317

PART 1: SECTION 4.2DOMESTIC ALARMS - SMOKE, HEAT AND CARBON MONOXIDECertificated ProductsLPCB Ref.No.0915N Replaceable 9V Battery operated ionization smoke alarm 904a/030916NReplaceable 9V Battery operated ionization smoke alarm904a/04with alarm silence feature0918NReplaceable 9V Battery operated ionization smoke alarmwith emergency light and alarm silence feature904a/05Kidde Safety Europe LtdMathisen Way, Colnbrook, Berkshire SL3 0HB, United KingdomTel: 01753 685148 • Fax: 01753 685096E-mail: Simon.Jones@kiddesafety.co.uk • Website: www.kiddesafetyeurope.co.ukCertificate No: 904a-(cl-1) to EN 14604: 2005Domestic AlarmsCertificated ProductsLPCB Ref.No.0910UK 9V Battery operated ionization smoke alarm 904a/010914UK Replaceable 9V Battery operated ionization smoke alarm 904a/020914UK (Fire Sentry) Replaceable 9V Battery operated ionization smoke alarm 904a/020915UK Replaceable 9V Battery operated ionization smoke alarm 904a/030916UK Replaceable 9V Battery operation ionization smoke alarm with alarm silence feature 904a/040918UKReplaceable 9V Battery operated ionization smoke alarm with emergency light and alarm 904a/05silence featurei9040EU Replaceable 9V Battery operated ionization smoke alarm with alarm silence feature 904a/06I9040EU Lifesaver Replaceable 9V Battery operated ionization smoke alarm with alarm silence feature 904a/06i9060EU Replaceable 9V Battery operated ionization smoke alarm with alarm silence feature 904a/07i9080EUReplaceable 9V Battery operated ionization smoke alarm with emergency light and alarmsilence feature904a/08NINGBO LONGMAX ELECTRONIC CO., LTDNo.28 Fengyuan Road, Economic Development Area of YuYao City, (South Zone), Ningbo, Zhejiang 315400,ChinaTel: +86 75586221071Certificate No: 1155b to EN 14604: 2005/AC: 2008Certificate No: 1155a to EN50291-1: 2010Smoke AlarmsCertificated ProductsLPCB Ref.No.LM-201A Battery Operated Type B Carbon Monoxide Alarm 1155a/01LM-101LABattery operated domestic smoke alarm with RF interlinkable function (502003 mounting 1155b/01plate)Notes:1. Battery types approved with this domestic smoke alarm:- Pair Deer 9V 6F22- GP 9V 1604S- Mustang 9V 6F22- Pair Deer 9V 6LR61- GP 9V 1604A- Pair Deer 3 x 1.5V LR6/AA- GP 3 x 1.5V GP15AU- Mustang 3 x 1.5V LR6/AA2. The radio link functionality is not included within the scope of approvalLM-101LBBattery operated domestic smoke alarm with RF interlinkable function (502003 mounting 1155b/02plate)Notes:1. Battery types approved with this domestic smoke alarm:- Pair Deer 9V 6F22- GP 9V 1604S318 18 Jan 2014

PART 1: SECTION 4.2DOMESTIC ALARMS - SMOKE, HEAT AND CARBON MONOXIDECertificated ProductsLM-101LCLM-101LDLM-101LELM-101LFLM-101LG- Mustang 9V 6F22- Pair Deer 9V 6LR61- GP 9V 1604A- Pair Deer 3 x 1.5V LR6/AA- GP 3 x 1.5V GP15AU- Mustang 3 x 1.5V LR6/AA2. The radio link functionality is not included within the scope of approvalBattery operated domestic smoke alarm with RF interlinkable function (502003 mountingplate)Notes:1. Battery types approved with this domestic smoke alarm:- Pair Deer 9V 6F22- GP 9V 1604S- Mustang 9V 6F22- Pair Deer 9V 6LR61- GP 9V 1604A- Pair Deer 3 x 1.5V LR6/AA- GP 3 x 1.5V GP15AU- Mustang 3 x 1.5V LR6/AA2. The radio link functionality is not included within the scope of approvalBattery operated domestic smoke alarm with RF interlinkable function (502003 mountingplate)Notes:1. Battery types approved with this domestic smoke alarm:- Pair Deer 9V 6F22- GP 9V 1604S- Mustang 9V 6F22- Pair Deer 9V 6LR61- GP 9V 1604A- Pair Deer 3 x 1.5V LR6/AA- GP 3 x 1.5V GP15AU- Mustang 3 x 1.5V LR6/AA2. The radio link functionality is not included within the scope of approvalBattery operated domestic smoke alarm with RF interlinkable function (502003 mountingplate)Notes:1. Battery types approved with this domestic smoke alarm:- Pair Deer 9V 6F22- GP 9V 1604S- Mustang 9V 6F22- Pair Deer 9V 6LR61- GP 9V 1604A- Pair Deer 3 x 1.5V LR6/AA- GP 3 x 1.5V GP15AU- Mustang 3 x 1.5V LR6/AA2. The radio link functionality is not included within the scope of approvalBattery operated domestic smoke alarm with RF interlinkable function (502003 mountingplate)Notes:1. Battery types approved with this domestic smoke alarm:- Pair Deer 9V 6F22- GP 9V 1604S- Mustang 9V 6F22- Pair Deer 9V 6LR61- GP 9V 1604A- Pair Deer 3 x 1.5V LR6/AA- GP 3 x 1.5V GP15AU- Mustang 3 x 1.5V LR6/AA2. The radio link functionality is not included within the scope of approvalBattery operated domestic smoke alarm with RF interlinkable function (502003 mountingplate)Notes:1. Battery types approved with this domestic smoke alarm:- Pair Deer 9V 6F22- GP 9V 1604S- Mustang 9V 6F22- Pair Deer 9V 6LR61- GP 9V 1604A- Pair Deer 3 x 1.5V LR6/AA- GP 3 x 1.5V GP15AU- Mustang 3 x 1.5V LR6/AA2. The radio link functionality is not included within the scope of approvalLPCB Ref.No.1155b/031155b/041155b/051155b/061155b/0718 Jan 2014 319

PART 1: SECTION 4.2DOMESTIC ALARMS - SMOKE, HEAT AND CARBON MONOXIDENingbo Siterwell Electronics Co., Ltd.76 Haichuan Road, Chuangye Zone B, Jiangbei, Ningbo, Zhejiang Province 315032, ChinaTel: 0086-574-8307 6161 • Fax: 0086-574-8307 6652E-mail: sales@china-siter.com • Website: www.china-siter.comCertificate No: 1044a to EN 14604: 2005Certificated ProductsLPCB Ref.No.GS505 Battery operated photoelectric smoke alarm (replaceable battery) 1044a/01GS506 Battery operated photoelectric smoke alarm (replaceable battery) 1044a/02GS503 Battery operated photoelectric smoke alarm (replaceable battery) 1044a/03GS506A Battery operated photoelectric smoke alarm (replaceable battery) 1044a/04Note:1. Identical to GS506 with silver coloured coverGS506H Battery operated photoelectric smoke alarm (replaceable battery) 1044a/05Note:1. Identical to GS506 with wood coloured coverSabre Fire & Security Ltd6 South Mundells, Welwyn Garden City, Herts AL7 1EP, United KingdomTel: 01707 393888E-mail: sales@sabre-fire.co.ukCertificate No: 971a-(cl-4) to EN14604: 2005Certificated ProductsLPCB Ref.No.4WOT 10 year battery operated photoelectric smoke alarm with interlink 971a/024WOB Mains powered operated photoelectric smoke alarm with primary back-up battery 971a/064WORMains powered operated photoelectric smoke alarm with rechargeable lithium back-upbattery971a/07Shanghai Mosafe Equipment Co.LtdUnit 203, Block B2, 889 Shangcheng Road, Pudong New Area, Shanghai 200120, ChinaTel: +86 21 60753200Certificate No: 1044a-(cl-1) to EN 14604: 2005Smoke AlarmsCertificated ProductsLPCB Ref.No.MS505 Battery operated photoelectric smoke alarm (replaceable battery) 1044a/01MS506 Battery operated photoelectric smoke alarm (replaceable battery) 1044a/02MS503 Battery operated photoelectric smoke alarm (replaceable battery) 1044a/03320 18 Jan 2014

PART 1: SECTION 4.2DOMESTIC ALARMS - SMOKE, HEAT AND CARBON MONOXIDEShenzhen Fanhai Sanjiang Electronics CO., Ltd3/F., Guangcai Xintiandi Mansion, Nanshan Road, Nanshan District, Shenzhen, Guangdong 518054, ChinaTel: +86 75586221071E-mail: caozj@fhsjdz.comCertificate No: 1159a to EN 14604: 2005Smoke AlarmsCertificated ProductsLPCB Ref.No.JTY-GD-H365 9v Battery Operated Photoelectric Smoke Alarm 1159a/01Sprue Safety Products LtdVanguard Centre, Sir William Lyons Road, Coventry CV4 7EZ, United KingdomTel: +44 (0)2476 323232 • Fax: +44 (0)2476 693610E-mail: info@fireangel.co.uk • Website: www.fireangel.co.ukCertificate No: 651c to EN 50291: 2001Carbon Monoxide AlarmsCertificated ProductsLPCB Ref.No.CO-828 Carbon Monoxide Alarm - LCD 651c/01CO-808 Carbon Monoxide Alarm - LED 651c/02CO-808S Sealed Carbon Monoxide Alarm - Dual LED 651c/03Certificate No: 651d to EN 14604: 2005Smoke AlarmsCertificated ProductsLPCB Ref.No.SI-601-XX FireAngel Battery operated ionisation smoke alarm 651d/01SI-610-XX FireAngel Sealed Battery operated ionisation smoke alarm 651d/02WSI-601XX FireAngel Battery operated ionisation smoke alarm with RF transmitter module 651d/03Note: The RF transmitter module is not covered within the scope of this approvalSO-601-XX FireAngel Battery operated optical smoke alarm 651d/04SO-610-XX FireAngel Sealed Battery operated optical smoke alarm 651d/05WSO-601-XX FireAngel Battery operated optical smoke alarm with RF transmitter module 651d/06Note: The RF transmitter module is not covered within the scope of this approval.WSO-610-XX FireAngel Sealed Battery operated optical smoke alarm with RF transmitter module 651d/09Note: The RF transmitter module is not covered within the scope of this approvalST-630-XX FireAngel Thermoptek battery operated thermally enhanced photoelectric smoke alarm 651d/11WST- 630-XX FireAngel Thermoptek battery operated thermally enhanced photoelectric smoke alarm -with RF transceiver moduleNote:The RF transceiver module is not covered within the scope of this approvalWST-AE630-XX AngelEye Thermoptek battery operated thermally enhanced photoelectric smoke alarm -with RF transceiver moduleNote:-XX, denotes Country and Language variantsNote: The RF transceiver module is not covered within the scope of this approval651d/12651d/12SuffixBlank-DE-FR-NODescriptionUK variantGermany variantFrance variantNorway variant18 Jan 2014 321

PART 1: SECTION 4.2DOMESTIC ALARMS - SMOKE, HEAT AND CARBON MONOXIDE-NL-FI-ES-BE-SE-AT-IT-DK-EU-BNLNetherlands variantFinland variantSpain variantBelgium variantSweden variantAustria variantItaly variantDenmark variantGeneric European variantDual-language variant for Belgium and the Netherlands (Dutch and French language)Certificate No: 651e to EN 14604: 2005 and LPS 1282 Issue 1.0Combined Smoke and Carbon Monoxide AlarmsCertificated ProductsLPCB Ref.No.SCO5-XX Fire Angel Combination carbon monoxide and photoelectric smoke alarm. 651e/01SCO5-XX First Alert Combination carbon monoxide and photoelectric smoke alarm. 651e/01Notes:1) -XX, denotes Country and Language variants.SuffixDescription-UKUK variant-DEGermany variant-FRFrance variant-NONorway variant-NLNetherlands variant-FIFinland variant-ESSpain variant-BEBelgium variant-SESweden variant-ATAustria variant-ITItaly variant-DKDenmark variant-EUGeneric European variant-CEDual-language variant for Belgium and the Netherlands (Dutch and French language)-Q UK Retail-JLJohn Lewis2) Tested to latest EMC standard EN 50270:2006Visonic24 Habarzel Street, Tel Aviv 69710, IsraelTel: +44 (0)870 7300810 • Fax: +44 (0)870 7300801E-mail: DalitS@visonic.com • Website: www.visonic.comCertificate No: 512e to EN 50291: 2001Carbon Monoxide AlarmsCertificated ProductsLPCB Ref.No.MCT-442 Type A battery operated carbon monoxide alarm 512e/01Zeta Alarm Systems by GLT Exports LimitedDetection House, 72-78 Morfa Road, Swansea SA1 2EN, United KingdomTel: +44 (0)1792 455175 • Fax: +44 (0)1792 455176E-mail: ghassan@gltexports.com • Website: www.gltexports.comCertificate No: 330j to EN 14604: 2005322 18 Jan 2014

PART 1: SECTION 4.2DOMESTIC ALARMS - SMOKE, HEAT AND CARBON MONOXIDECertificated ProductsLPCB Ref.No.ZD-SI-601 Battery operated ionisation smoke alarm 330j/01ZD-SI-610 Battery operated ionisation smoke alarm 330j/02ZD-SO-601 Battery operated optical smoke alarm 330j/03ZD-SO-610 Battery operated optical smoke alarm 330j/0418 Jan 2014 323

PART 1: SECTION 5MANUAL CALL POINTSThe purpose of a manual call point is to enable a person discovering a fire to initiate the operation of a firealarm system so that appropriate measures can be taken. Therefore it is important for the manual call point tobe recognizable and simple to use. For this reason, the European standard has attempted to standardise theirappearance and function.There are basically two types of manual call points which are related to the method of operation.- Type A: direct operation (single action).- Type B: indirect operation (double action).Both types require the breaking or the visible displacement by change of position of a frangible elementforming part of the front face.Guidance on the selection, siting and speed of response should be sought from the applicable installation ruleor code of practice (e.g. BS 5839-1). For example BS 5839-1 recommends only type A with a speed ofevacuation signal within 3 seconds. Other codes of practice, may require a type B installation.This section lists manual call points approved for use in fire detection and fire alarm systems in buildings. Theinitial approval and continued approval processes for manual call points are outlined in scheme documentSD041.Products listed in this section have been approved to:EN 54-11: 2001 Manual call pointsEN 54-11: 2001 + A1: 2005 Manual call pointsEN 54-25: 2008 Components using radio linksISO 7240-11: 2005 Manual call pointsAudit:Regular product auditing and regular factory inspections are carried out by LPCB ensuring high manufacturingstandards and continued compliance with the applicable product standard.Notes:1. EN 54-11: 2001 supersedes BS 5839-2: 1983 which was withdrawn in November 2003. EN 54-11: 2001 isnow a harmonised standard for the Construction Products Directive and CE marking is required for mostof the European market from 1 September 2008.2. EN 54-25: 2008 is now a harmonised standard for the Construction Products Directive and CE marking isrequired for most of the European market since 1 March 2011. It is therefore recommended that radio linkcomponents are certificated to EN 54- 25: 20083. Since the LPCB uses national and international standards for the listing of products, in some instancesthe requirements of these standards may conflict with the recommendations of local codes of practice. Werecommend that specifiers seek advice from the relevant local authorities and amend their specificationsaccordingly.Advanced Electronics Limited34 Moorland Way, Nelson Park, Cramlington, Northumberland NE23 1WE, United KingdomTel: +44 (0)1670 707 111 • Fax: +44 (0)1670 707 222E-mail: ksewell@advel.co.uk • Website: www.Advel.co.ukCertificate No: 010w to EN 54-11:2001 and EN 54-17:2005Certificate No: 928h-(cl-5) to EN 54-11: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005Certificate No: 928p-(cl-1) to EN 54-11: 2001 + A1: 2005 and EN 54-25: 2008324 18 Jan 2014

PART 1: SECTION 5MANUAL CALL POINTSCertificated Products58100-908 ADV Analogue addressable manual call point with short circuit isolator and surface mountingbox.20-VCP100-ADVAnalogue addressable Type A indoor re-settable manual call point with short circuitisolator (SR01 and Flush mounting plate)20-SGCP100-ADVWireless type A resettable indoor manual call point(SRO1 surface mount back box)Note:1.The device must be used with the following batteries only:CR123A (3Vdc) - main batteryCR2032A (3Vdc) - secondaryLPCB Ref.No.010w/03928h/01928p/01AncillariesSR01 Surface mounting boxFlush mounting plateAdvantronic Systems S.L.C/Yunque 9 Nave B1, Tres Cantos, Madrid 28760, SpainTel: +34 91 806 2343 • Fax: +34 91 803 1171E-mail: jpedrouzo@advantronic.es • Website: www.advantronic.esCertificate No: 928h-(cl-3) to EN 54-11: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005Certificate No: 928p-(cl-2) to EN 54-11: 2001 + A1: 2005 and EN 54-25: 2008Certificated ProductsAV111ALAVW111ALAnalogue addressable Type A indoor re-settable manual call point with short circuitisolator (SR01 and Flush mounting plate)Wireless type A resettable indoor manual call point(SRO1 surface mount back box)Note:1.The device must be used with the following batteries only:CR123A (3Vdc) - main batteryCR2032A (3Vdc) - secondaryLPCB Ref.No.928h/01928p/01AncillariesSR01 Surface mounting boxFlush mounting plateAMPAC Technologies PTY Ltd7 Ledgar Road, Balcatta 6021, AustraliaTel: +618 (9242) 3333 • Fax: +618 (9242) 3334E-mail: info@ampac.net • Website: www.ampac.netCertificate No: 010n to EN 54-11:2001Certificate No: 010w to EN 54-11:2001 and EN 54-17:2005Certificate No: 010n-(cl-2) to EN54-11: 2001 + A1: 2005Certificate No: 010w-(cl-2) to EN54-11: 2001 + A1: 2005 & EN54-17: 2005Certificate No: 010av-(cl-1) to EN 54-11: 2001 + A1: 2005 and EN 54-17: 2005Certificated ProductsLPCB Ref.No.213-0050 Analogue addressable manual call point with surface mounting box 010n/02213-0052 Analogue addressable manual call point with surface mounting box 010n/06213-0051 Analogue addressable manual call point with short circuit isolator and surface mounting 010w/01box213-0053 Analogue addressable manual call point with short circuit isolator and surface mounting 010w/03box58100-950AMP Discovery analogue addressable waterproof manual call point 010n/0858100-951AMP Discovery analogue addressable waterproof manual call point with short circuit isolator 010w/0655200-908AMP XP95 Analogue Addressable Type A Indoor Manual Call Point with Short Circuit Isolator 010av/0118 Jan 2014 325

PART 1: SECTION 5MANUAL CALL POINTSApollo (Beijing) Fire Products Co LtdNo. 5, Industrial District North-West Jia, Jiugong Town Daxing District, Beijing 100076, ChinaTel: +86 10 8361 7122 • Fax: +86 10 8361 7017E-mail: lhxf@uip.163.comCertificate No: 1032a to EN 54-11: 2001 and EN 54-17: 2005Certificate No: 1032b to EN 54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.55200-908 XP95 Analogue Addressable Type A Indoor Manual Call Point with short Circuit Isolator 1032a/0158200-908 Discovery Analogue Addressable Type A Indoor Manual Call Point with short Circuit 1032a/02Isolator58200-971 Discovery Analogue Addressable Type A Indoor Manual Call Point with Short Circuit 1032a/03Isolator58200-910 Discovery Analogue addressable Type A Indoor Manual Call Point 1032b/0155200-905 XP95 Analogue addressable Type A Indoor Manual Call Point 1032b/0258200-970 Discovery Analogue addressable Type A Indoor Manual Call Point 1032b/0355200-001 Conventional Type A Indoor Manual Call Point 1032b/0655200-021 Conventional Type A Indoor Manual Call Point 1032b/0855200-031 Conventional Type A Indoor Manual Call Point 1032b/1055200-894 Alarmsense Type A Indoor Manual Call Point 1032b/12Apollo Fire Detectors Limited36 Brookside Road, Havant, Hampshire PO9 1JR, United KingdomTel: +44 (0)2392 492412 • Fax: +44 (0)2392 492754E-mail: enquiries@apollo-fire.co.ukSales Enquiries GermanyApollo Deutschland GmbHTel: +49 5241 330 60 • Fax: +49 5241 330 629E-mail: info@apollo-feuer.deSales Enquiries SpainApollo EspanaTel: +34 627 988 061 • Fax: +34 949 335 289E-mail: apollo.espana@apollo-fire.comSales Enquiries ChinaApollo Fire Detectors Limited, Shanghai representative officeTel: +86 21 5237 0922 • Fax: +86 21 5237 0920E-mail: tony.ye@apollo-fire.comCertificate No: 010d to BS 5839: Part 2:1983Certificate No: 010n to EN 54-11: 2001Certificate No: 010w to EN 54-11: 2001 and EN 54-17: 2005Certificate No: 010au to EN 54-11: 2001 + A1: 2005Certificate No: 010av to EN 54-11: 2001 + A1: 2005 and EN 54-17: 2005Certificate No: 010az to EN 54-11: 2001 + A1: 2005 and EN 54-17: 2005Certificate No: 010da to EN 54-11: 2001 + A1: 2005326 18 Jan 2014

PART 1: SECTION 5MANUAL CALL POINTSCertificated ProductsLPCB Ref.No.55000-900 XP95 Analogue addressable flush and surface mounted manual call point 010d/06Certificated with Apollo, Series 90 and XP95 communication protocols55000-940 XP95 IS Analogue addressable intrinsically safe manual call point 010d/03Certificated with Apollo, Series 90 and XP95 communication protocols55000-950 XP95 Analogue addressable waterproof manual call point 010d/04Certificated with Apollo, Series 90 and XP95 communication protocols58000-900 Discovery Analogue addressable flush and surface mounted manual call point 010d/05Certificated with Series 90, XP95 and Discovery digital communication protocols58000-910 Discovery Analogue addressable flush mounted manual call point 010d/05Certificated with Series 90, XP95 and Discovery digital communication protocols58000-920 Discovery Analogue addressable surface mounted manual call point 010d/05Certificated with Series 90, XP95 and Discovery digital communication protocols59000-910 XPlorer Analogue addressable surface mounted manual call point 010n/01Certificated with Series 90 and XP95 digital communication protocolsCertificated with the Burgess V3NCSET7 Mk 1 microswitch55100-905 XP95 Analogue addressable manual call point with surface mounting box 010n/0258100-910 Discovery Analogue addressable manual call point with surface mounting box 010n/0655100-908 XP95 Analogue addressable manual call point with short circuit isolator and surface mounting 010w/01box58100-908 Discovery Analogue addressable manual call point with short circuit isolator and surface mounting 010w/03box58100-905 Discovery Analogue addressable manual call point with short circuit isolator, glass frangible element 010w/05and surface mounting box58100-950 Discovery Analogue addressable waterproof manual call point 010n/0855100-940 XP95IS Analogue addressable intrinsically safe manual call point. 010n/0958100-951 Discovery Analogue addressable waterproof manual call point with short circuit isolator 010w/0658200-910 Discovery Analogue addressable Type A Indoor Manual Call Point 010au/0155200-905 XP95 Analogue addressable Type A Indoor Manual Call Point 010au/0358200-970 Discovery Analogue addressable Type A Indoor Manual Call Point 010au/0455200-001 Conventional Type A Indoor Manual Call Point 010au/0755200-021 Conventional Type A Indoor Manual Call Point 010au/0955200-031 Conventional Type A Indoor Manual Call Point 010au/1155200-894 Alarmsense Type A Indoor Manual Call Point 010au/1355200-908 XP95 Analogue Addressable Type A Indoor Manual Call Point with short Circuit Isolator 010av/0158200-908 Discovery Analogue Addressable Type A Indoor Manual Call Point with short Circuit 010av/02Isolator58200-971 Discovery Analogue Addressable Type A Indoor Manual Call Point with Short Circuit 010av/03Isolator55200-908 XP95 Analogue Addressable Type A Indoor Manual Call Point with short Circuit Isolator 010az/0158200-908 Discovery Analogue Addressable Type A Indoor Manual Call Point with short Circuit 010az/02Isolator58200-971 Discovery Analogue Addressable Type A Indoor Manual Call Point with short Circuit 010az/03Isolator58200-910 Discovery Analogue addressable Type A Indoor Manual Call Point 010da/0155200-905 XP95 Analogue addressable Type A Indoor Manual Call Point 010da/0258200-970 Discovery Analogue addressable Type A Indoor Manual Call Point 010da/0355200-001 Conventional Type A Indoor Manual Call Point 010da/0455200-021 Conventional Type A Indoor Manual Call Point 010da/0555200-031 Conventional Type A Indoor Manual Call Point 010da/0655200-894 Alarmsense Type A Indoor Manual Call Point 010da/07Argus Security S.r.l.Via del Canneto 14, Valle delle Noghere, 34015 Muggia, Trieste, ItalyTel: +39 (0) 402821110 • Fax: +39 (0) 402823483E-mail: dcresseri@argussecurity.it • Website: www.argussecurity.itCertificate No: 928h to EN 54-11: 2001 + A1: 2002 and EN 54-17: 2005Certificate No: 928p to EN 54-11: 2001 + A1: 2005 and EN 54-25: 2008Certificated ProductsVCP100SGCP100Analogue addressable Type A re-settable manual call point with short circuit isolator(SR01 and Flush mounting plate)Wireless type A resettable indoor manual call point(SRO1 surface mount back box)Note:LPCB Ref.No.928h/01928p/0118 Jan 2014 327

PART 1: SECTION 5MANUAL CALL POINTSCertificated ProductsSGCP100-FR1.The device must be used with the following batteries only:CR123A (3Vdc) - main batteryCR2032A (3Vdc) - secondaryWireless type A resettable indoor manual call point(SRO1 surface mount back box)Note:1.The device must be used with the following batteries only:CR123A (3Vdc) - main batteryCR2032A (3Vdc) - secondaryLPCB Ref.No.928p/01AncillariesSR01 Surface mounting boxFlush mounting plateArgus-Spectrum65 Serdobolskaya St, St. Petersburg 197342, Russian FederationTel: +7 812 7037500 • Fax: +7 812 7037501E-mail: mail@argus-spectr.ru • Website: www.argus-spectr.ruCertificate No: 928h-(cl-2) to EN 54-11: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005Certificate No: 928p-(cl-3) to EN 54-11: 2001 + A1: 2005 and EN 54-25: 2008Certificated ProductsVCP100SGCP100Analogue addressable Type A indoor re-settable manual call point with short circuitisolator (SR01 and Flush mounting plate)Wireless type A resettable indoor manual call point(SRO1 surface mount back box)Note:1.The device must be used with the following batteries only:CR123A (3Vdc) - main batteryCR2032A (3Vdc) - secondaryLPCB Ref.No.928h/01928p/01AncillariesSR01 Surface mounting boxFlush mounting plateATEIS Middle East FZCOLIU 11 Dubai Silicon Oasis, Post Box 293640, Dubai, United Arab EmiratesTel: +971 4 3262730 • Fax: +971 4 3262731E-mail: info@ateis.ae • Website: www.ateis.aeCertificate No: 928p-(cl-4) to EN 54-11: 2001 + A1: 2005 and EN 54-25: 2008Certificate No: 1154h to EN 54-11: 2001 + A1: 2005 and EN 54-17: 2005Certificated ProductsVELOX WLCP100VELOX 40800Wireless type A resettable indoor manual call point(SRO1 surface mount back box)Note:1.The device must be used with the following batteries only:CR123A (3Vdc) - main batteryCR2032A (3Vdc) - secondaryAnalogue addressable Type A resettable indoor manual call point with short circuitisolator(SR01 and Flush mounting plate)LPCB Ref.No.928p/011154h/01AncillariesSR01 Surface mounting boxFlush mounting plate328 18 Jan 2014

PART 1: SECTION 5MANUAL CALL POINTSBentel Security s.r.l.Via Gabbiano, n.22, Z.Ind. Le S.Scolastica, Corropoli, Teramo 64013, ItalyTel: +39 0861 839060 • Fax: +39 0861 839065E-mail: info@bentelsecurity.com • Website: www.bentelsecurity.comCertificate No: 681n-(cl-2) to EN 54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.FC420CP Addressable Type A indoor manual call point 681n/01FC421CP Addressable Type A outdoor manual call point 681n/02Bristol Fire LtdThe Colin Saunders Innovation Centre, Mewburn Road, Banbury, Oxfordshire OX16 9PA, United KingdomTel: +44 1295 817623E-mail: sami@bristol-fire.com • Website: www.bristol-fire.comCertificate No: 506d-(cl-1) to EN 54-11 :2001 + A1: 2005Certificated ProductsLPCB Ref.No.BF-M-0317 Conventional indoor surface flush mounting manual call point 506d/01Accessories:AHMB-0217 back box for surface mountingCeasefire Industries Ltd"Doli Chambers", Flat 602 6th Floor behind strand cinema, Colaba, Mumbai-400 005, IndiaTel: + 91-(0) 22-22854677 • Fax: +91-(0) 22-66349069E-mail: response@ceasefire.in • Website: www.ceasefire.inCertificate No: 166b-(cl-1) to EN54-11: 2001 + A1: 2005Certificate No: 164j-(cl-1) to EN 54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.MCP1A-R470SF-H029-02 Indoor surface/flush mounting conventional call point 166b/39HCP-EAddressable Manual Call Point(SR and SR1T mounting boxes)164j/01Accessories:SRSurface mounting plastic boxSR1TSurface mounting plastic box c/w 1 terminalSR2TSurface mounting plastic box c/w 2 terminalsSR3TSurface mounting plastic box c/w 3 terminalsSR4TSurface mounting plastic box c/w 4 terminalsMRSurface mounting metal boxETT European Terminal Tray ETT1, 2 & 3LEarth Continuity LinkBZR/1 Bezel Type 1BZR/2 Bezel Type 2BZR/3 Bezel Type 3M141Spacer PiecePTRPattress PTR, PTRE, PTR2T, PTR2TE, PTR3T & PTR3TEC Hinged Cover (1)Note: The hinged cover is optionally indicated by the presence of ‘C’ at the end of the model number.18 Jan 2014 329

PART 1: SECTION 5MANUAL CALL POINTSContext Plus LtdExport House, 175 Mauldeth Road, Fallowfield, Manchester M14 6SG, United KingdomTel: +44 (0)161 257 2541 • Fax: +44 (0)161 225 8817E-mail: xportsales@xportsales.com • Website: www.xportsales.comCertificate No: 010w to EN 54-11:2001 and EN 54-17:2005Certificate No: 010av-(cl-2) to EN 54-11: 2001 + A1: 2005 and EN 54-17: 2005Certificated ProductsLPCB Ref.No.55100-908 IMC Analogue addressable manual call point with short circuit isolator and surface mounting 010w/01box.55200-908IMC XP95 Analogue Addressable Type A Indoor Manual Call Point with Short Circuit Isolator 010av/01Control Equipment LimitedHillcrest Business Park, Dudley, West Midlands DY2 9AP, United KingdomTel: +44 (0)1384 458651 • Fax: +44 (0)1384 458972E-mail: celsales@controlequipment.co.uk • Website: www.controlequipment.comCertificate No: 681n-(cl-3) to EN 54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.FC420CP Addressable Type A indoor manual call point 681n/01FC421CP Addressable Type A outdoor manual call point 681n/02Cooper Fulleon LimitedLlantarnam Park, Cwmbran, South Wales NP44 3AW, United KingdomTel: +44 (0)1633 628500 • Fax: +44 (0)1633 866346E-mail: sales@fulleon.co.uk • Website: www.cooperfulleon.comCertificate No: 378c to EN 54: Part 11: 2001Certificated ProductsLPCB Ref.No.CX/G/R/BB Conventional indoor manual call point, with surface mount back box* 378c/01CX/P/R/NB Conventional resettable indoor manual call point, flush mounted* 378c/02CX/P/R/BB Conventional resettable indoor manual call point, with surface mount back box* 378c/02CXL/GP/R/BBConventional type A glass or plastic re-settable indoor manual call point, with surface 378c/03mount back boxCXL/GP/R/NB Conventional type A glass or plastic re-settable indoor manual call point, flush mounted 378c/03CXL/GP/R/WP Conventional type A glass or plastic re-settable indoor/outdoor manual call point 378c/04CXL/GP/R/BBConventional type A glass or plastic re-settable indoor manual call point, with surface 378c/05mount back boxCXL/GP/R/NB Conventional type A glass or plastic re-settable indoor manual call point, flush mounted 378c/05CXL/GP/R/WP Conventional type A glass or plastic re-settable indoor/outdoor manual call point 378c/06CXL/GP/R/BB/HEConventional Type A glass or plastic re-settable indoor manual call point with Chinese 378c/07textCXL/GP/R/WP/HEConventional Type A glass or plastic re-settable indoor / outdoor manual call point withChinese text378c/08* Approved with V4NCSET7 Mk1 or V4NSET7-UL micro switches only.Accessories:/BB surface mounted (plastic back box)330 18 Jan 2014

PART 1: SECTION 5MANUAL CALL POINTSCooper Industries IncWheatley Hall Road, Doncaster, South Yorkshire DN2 4NB, United KingdomTel: +44 (0)1302 303303 • Fax: +44 (0)1302 367155E-mail: sales@cooper-ls.com • Website: www.cooper-ls.comCertificate No: 378d-(cl-1) to EN 54-11: 2001 + A1: 2005 and EN 54-17: 2005Certificate No: 378d-(cl-2) to EN 54-11: 2001 + A1: 2005 and EN 54-17: 2005Certificated ProductsLPCB Ref.No.CBG 370S Addressable type A glass indoor manual call point, with surface mount back box 378d/05CBG 370 Addressable type A glass indoor manual call point, flush mounted 378d/06PAJ3034900Addressable type A plastic re-settable indoor manual call point with surface mount back 378d/07boxCBG 370WP Addressable weatherproof type A glass indoor/outdoor manual call point 378d/08PAJ3035100 Addressable weatherproof type A plastic re-settable indoor/outdoor manual call point 378d/09CBG 370S-O Addressable type A glass indoor manual call point, with surface mount back box 378d/12CBG 370-O Addressable type A glass indoor manual call point, flush mounted 378d/13CBG 370WP-O Addressable weatherproof type A glass indoor/outdoor manual call point 378d/14FXN501 Addressable type A glass indoor manual call point, with surface mount back box 378d/05FXN503 Addressable weatherproof type A glass indoor/outdoor manual call point 378d/08MBG813 Addressable type A glass indoor manual call point, with surface mount back box 378d/05MBG814 Addressable type A glass indoor manual call point, flush mounted 378d/06MBG817 Addressable weatherproof type A glass indoor/outdoor manual call point 378d/08FXN502 Addressable type A glass indoor manual call point, flush mounted 378d/06Cooper Lighting and Safety LtdWheatley Hall Road, Doncaster, South Yorkshire DN2 4NB, United KingdomTel: +44 (0)1302 303397 • Fax: +44 (0)1302 303251Website: www.cooper-Is.comCertificate No: 714k to EN54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.MBG914 Conventional type A indoor manual call point with 470R resistor and 4V7 zener diode 714k/01CX201 Conventional type A indoor manual call point with 680R resistor 714k/01FX201 Conventional type A indoor manual call point with 680R resistor 714k/01MBG917Conventional type A weatherproof manual call point with 470R resistor and 4V7 zener 714k/02diodeCX203 Conventional type A weatherproof manual call point with 680R 2W resistor 714k/02FX203 Conventional type A weatherproof manual call point with 680R 2W resistor 714k/02MBG914 Conventional type A indoor manual call point with 470R resistor and 4V7 zener diode 714k/03CX201 Conventional type A indoor manual call point with 680R resistor 714k/03FX201 Conventional type A indoor manual call point with 680R resistor 714k/03MBG917Conventional type A weatherproof manual call point with 470R resistor and 4V7 zener 714k/04diodeCX203 Conventional type A weatherproof manual call point with 680R 2W resistor 714k/04FX203 Conventional type A weatherproof manual call point with 680R 2W resistor 714k/0418 Jan 2014 331

PART 1: SECTION 5MANUAL CALL POINTSEmergi-Lite Safety Systems (Thomas & Betts Ltd)Bruntcliffe Lane, Morley, Leeds LS27 9LL, United KingdomTel: +44 (0)113 2810600 • Fax: +44 (0)113 2810601Website: www.emergi-lite.co.ukCertificate No: 010n to EN 54-11:2001Certificate No: 010w to EN 54-11:2001 and EN 54-17:2005Certificated ProductsLPCB Ref.No.FA95-400 Analogue addressable manual call point with surface mounting box 010n/02FADY-400-ISOAnalogue addressable manual call point with short circuit isolator and surface mountingbox010w/03Emirates Fire Fighting Equipment Factory L.L.C. (FIREX)P.O.Box 22436, Industrial Area 13, Sharjah, United Arab EmiratesTel: +971 6 5340300 • Fax: +971 6 5340090E-mail: firex@emirates.net.ae • Website: www.firexuae.comCertificate No: 506d to EN 54-11: 2001Certificated ProductsLPCB Ref.No.FX-0217 Conventional indoor surface/flush mounting manual call point 506d/01Note: Approved for surface mount use when used with the AHMB-0217 back boxAccessories:AHMB-0217 back box for surface mountingEmirates Fire Protections Equip. Factory. TR. SectionBehind the Fourth Industrial Estate, Industrial Area 3, UAE PO 22436, Sharjah, United Arab EmiratesTel: 00971 653 40300 • Fax: 00971 653 40090E-mail: QC@firexuae.com • Website: www.firexuae.comCertificate No: 548g-(cl-3) to EN 54-11: 2001 + A1: 2005Certificated ProductsFX9204FX9204IConventional re-settable type A indoor manual call point, surface and flush mounting (D-92FC)Digital addressable re-settable type A indoor manual call point, surface and flushmounting (D-92FC)LPCB Ref.No.548g/03548g/04Eurotech Fire Systems Limited19/20 Stratfield Park, Elettra Avenue, Waterlooville, Hampshire PO7 7XN, United KingdomTel: +44 (0)203 141 0999 • Fax: +44 (0)239 225 2554E-mail: enquiry@eurotechfire.com • Website: www.eurotechfire.comCertificate No: 653a-(cl-2) to EN 54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.EURVC-MCP Conventional Type A re-settable indoor flush/surface manual call point. 653a/01332 18 Jan 2014

PART 1: SECTION 5MANUAL CALL POINTSCertificated ProductsNotes:1. Flush mount approved model EURVC-MCP-IP24F (M200)2. Surface mount approved model EURVC-MCP-IP24 (M200 + M125)3. Surface mount approved model EURVC-MCP-IP24S (M223)4. Approved colour, red onlyLPCB Ref.No.AccessoriesM200 wall plateM125 back boxM223 back boxEverday Technology Co. LimitedNo,.95., Sec. 2., Ligong 1 St. Road., Letzer Industrial Park, Yilan County 26841, Taiwan ROCTel: +886 3 990 6099 • Fax: +862 3 990 6029E-mail: alex.hsieh@everday.com • Website: www.everday.comCertificate No: 512f to EN 54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.EM921 Conventional manual call point with LED 512f/01EM921-F Conventional manual call point with flashy LED 512f/02EM921-TC Convetnional manual call point with LED and transparent cover 512f/03EM921-FTC Conventional manual call point with flashy LED and transparent cover 512f/04Accessories:EM921B1EM921B2EM921B3Regular mounting base, 28mmHigh mounting base, 40mmHigh mounting base, 55mFike Safety Technology LtdUnit 31, Springvale Industrial Estate, Cwmbran, Gwent NP44 5BD, United KingdomTel: +44 (0)1633 865558 • Fax: +44 (0)1633 866656E-mail: fstinfo@fike.com • Website: www.fikesafetytechnology.co.ukCertificate No: 331e to EN 54-11: 2001 + A1: 2005 and EN 54-17: 2005Certificate No: 331d to EN 54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.403-0006 Sita analogue addressable Type A indoor manual call point with short circuit isolator 331e/01403-0007 Sita analogue addressable Type A outdoor manual call point with short circuit isolator 331e/02400-0006 Zeon conventional Type A indoor manual call point 331d/01400-0007 Zeon conventional Type A outdoor manual call point 331d/02402-0006 Twinflex conventional Type A indoor manual call point 331d/03402-0007 Twinflex conventional Type A outdoor manual call point 331d/04Accessoriesfor indoor devices45-0079-205 Standard backbox25-0078-205 Bezel18 Jan 2014 333

PART 1: SECTION 5MANUAL CALL POINTSFinder Elektronik A.S.Liman Mah., 6. Sok., No: 10 07070, Konyaalti, Antalya, TurkeyTel: +9 0242 344 2500 • Fax: +9 0242 344 2120E-mail: finder@finder.com.tr • Website: www.finder.com.trCertificate No: 928h-(cl-1) to EN 54-11: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005Certificate No: 958a-(cl-1) to EN 54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.FF VB200Analogue addressable Type A indoor re-settable manual call point with short circuit 928h/01isolator (SR01 and Flush mounting plate)FF VB100-FIO Conventional type A indoor manual call point 958a/01AncillariesSR01 Surface mounting boxFlush mounting plateDeep back boxSafety coverWall flush mount plate (white only) and external trim frame (white only)Fireguard Safety Equipment Co Ltd2nd Floor, 145-147 St John Street, London EC1V 4PY, United KingdomTel: +44 (0)8450 751042 • Fax: +44 (0)845 2991039E-mail: info@fireguard-uk.com • Website: www.fireguard-uk.comCertificate No: 512f-(cl-1) to EN 54-11: 2001 + A1: 2005Certificate No: 928h-(cl-8) to EN 54-11: 2001 + A1: 2005 and EN 54-17: 2005Certificated ProductsLPCB Ref.No.Fireguard FG921-FTC Conventional manual call point with flashy LED and transparent cover 512f/04FGCP100Analogue addressable Type A resettable indoor manual call point with short circuitisolator (SR01 and Flush mounting plate)928h/01Accessories:Fireguard FG921B1 Regular mounting base, 28mmFireguard FG921B2 High mounting base, 40mmFireguard FG921B3 High mounting base, 55mAncillaries:SR01 Surface mounting boxFlush mounting plateFireonica Co. Ltd2 The Dingle, Wolverhampton WV3 9ET, United KingdomTel: 01902 762 163 • Fax: 0845 299 1039E-mail: info@fireguard-uk.comCertificate No: 928h-(cl-9) to EN 54-11: 2001 + A1: 2005 and EN 54-17: 2005Certificated ProductsFOCP100Analogue addressable Type A resettable indoor manual call point with short circuitisolator (SR01 and Flush mounting plate)LPCB Ref.No.928h/01AncillariesSR01 Surface mounting box334 18 Jan 2014

PART 1: SECTION 5MANUAL CALL POINTSFlush mounting plateGent By Honeywell (Novar Systems Ltd)140 Waterside Road, Hamilton Industrial Park, Leicester LE5 1TN, United KingdomTel: +44 (0)116 246 2000 • Fax: +44 (0)116 246 2300E-mail: gent_enquiry@gent.co.uk • Website: www.gent.co.ukMiddle East Sales Enquiries:E-mail: gent.export@honeywell.comCertificate No: 042aq to EN 54-11: 2001 + A1: 2005Certificate No: 166b-(cl-2) to EN 54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.S4-34800 Analogue addressable Type A indoor manual call point (S4-34895 surface mount back 042aq/01box)Notes:1) Approved for use with glass non re-settable elementS4-34842 Analogue addressable Type A indoor manual call point with protective cover (S4-34895 042aq/02surface mount back box)Notes:1) Approved for use with glass non re-settable elementS4-34805 Analogue addressable Type A indoor manual call point042aq/05(S4-34895 surface mount back box)Notes:1) Approved for use with plastic re-settable elementS4-34845 Analogue addressable Type A indoor manual call point042aq/06with protective cover (S4-34895 surface mount back box)Notes:Approved for use with plastic re-settable elementXENS-850 Indoor flush mounting conventional call point 166b/39XENS-805 Indoor surface mounting conventional call point 166b/39XENS-801 Indoor surface mounting conventional call point 166b/43XENS-829 Outdoor surface mounting conventional call point 166b/51Accessories:S4-34895 surface mount back boxGlobal Fire Equipment S.A.M.A.R.F. - Armazens F3 & F4, Sitio do Guelhim, Estoi, 8009-021 Faro, PortugalTel: +351 289 896 560E-mail: sales@globalfire.ptCertificate No: 506d-(cl-2) to EN54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.GFE-MCPCSS Conventional indoor surface/flush mounting manual call point 506d/01Note: Approved for surface mount use when used with the GFE-MCPCSS/B back boxAccessoriesGFE-MCPCSS/B back box for surface mounting18 Jan 2014 335

PART 1: SECTION 5MANUAL CALL POINTSGulf Security Technology Co., Ltd.No 80 Changjiang East Road, QETDZ, Qinhuangdao, Hebei Province 066004, ChinaTel: +86 0335 8502434 • Fax: +86 0335 8502532E-mail: sales@fs.utc.com • Website: www.gst.com.cnCertificate No: 548g to EN 54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.C-9202 Conventional manual call point 548g/01I-9202 Intelligent manual call point 548g/02DC-9204 Conventional re-settable indoor manual call point, surface and flush mounting (D-92FC) 548g/03DI-9204Digital addressable re-settable indoor manual call point, surface and flush mounting (D- 548g/0492FC)DC-9204(10103213) Traditional Chinese Text Variant548g/05Conventional re-settable indoor manual call point, surface and flush mounting (D-92FC)DI-9204(10103212) Traditional Chinese Text Variant548g/06Digital addressable re-settable indoor manual call point, surface and flush mounting (D-92FC)DC-9204E Conventional Innovation Manual Call Point, Surface and Flush Mounting 548g/07DI-9204E Digital Addressable Manual Call Point, Surface and Flush Mounting 548g/08Accessories:D-92FC Transparent coverHDRGrosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, United KingdomTel: +44 (0)1634 260133 • Fax: +44 (0)1634 260132E-mail: info@hochikieurope.com • Website: www.hochikieurope.comCertificate No: 164j to EN 54-11:2001 + A1: 2005Certificate No: 164r to EN 54-17: 2005, EN 54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.1440270 Intelligent Analogue Addressable Manual Call Point (SR and SR1T mounting boxes) 164j/011440300 Weather Proof Intelligent Analogue Addressable Manual Call Point (SR and SR1T 164j/04mounting boxes)1440380 Intelligent analogue addressable manual call point with short circuit isolator164r/01(SR mounting box)1440360 Weather Proof Intelligent analogue addressable manual call point with short circuitisolator164r/02Ancillaries:SR Surface mounting plastic box - indoor models onlySR1T Surface mounting plastic box c/w 1 terminalHochiki Europe (UK) LimitedGrosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, United KingdomTel: +44 (0)1634 260133 • Fax: +44 (0)1634 260132Website: www.hochikieurope.comCertificate No: 164j to EN 54-11: 2001 + A1: 2005Certificate No: 164r to EN 54-17: 2005, EN 54-11: 2001 + A1: 2005Certificate No: 928p-(cl-6) to EN 54-11: 2001 + A1: 2005 and EN 54-25: 2008Certificated ProductsLPCB Ref.No.HCP-E (HFP) Intelligent Addressable Manual Call Point (SR and SR1T mounting boxes) 164j/01336 18 Jan 2014

PART 1: SECTION 5MANUAL CALL POINTSCertificated ProductsLPCB Ref.No.HCP-EFIntelligent Analogue Addressable Manual Call Point - French - (SR and SR1T mounting 164j/02boxes)HCP-E(DPS)Intelligent Analogue Addressable Manual Call Point - with Dual Pole Switching - (SR and 164j/03SR1T mounting boxes)HCP-W(HFP)Weather Proof Intelligent Analogue Addressable Manual Call Point164j/04(SR and SR1T mounting boxes)HCP-W(DPS)Weather Proof Intelligent Analogue Addressable Manual Call Point with Dual Pole 164j/05Switching (SR and SR1T mounting boxes)SCP-DPS Intelligent Analogue Addressable Type A Indoor Manual Call Point 164j/06HCP-E Intelligent Analogue Addressable Manual Call Point (SR and SRIT mounting boxes) 164j/01HCP-WWeather Proof Intelligent Analogue Addressable Manual Call Point164j/04(SR and SRIT mounting boxes)HCP-E(SCI)Intelligent Analogue Addressable Manual Call Point with short circuit isolator164r/01(SR mounting box)HCP-E(HFP)-SCIIntelligent Analogue Addressable Manual Call Point with short circuit isolator164r/01(SR mounting box)HCP-W(SCI)Weather proof Intelligent Analogue Addressable Manual Call point with short164r/02circuit isolatorHCP-W(HFP)-SCIWeather Proof Intelligent analogue addressable manual call point with short circuit 164r/02isolatorHCP-EM Intelligent Analogue Addressable Manual Call Point (SR and SR1T mounting boxes) 164j/01HCP-WMWeather Proof Intelligent Analogue Addressable Manual Call Point (SR and SR1T 164j/04mounting boxes)RSM-CPWireless type A resettable indoor manual call point928p/01(SRO1 surface mount back box)Note:1.The device must be used with the following batteries only:CR123A (3Vdc) - main batteryCR2032A (3Vdc) - secondaryAccessories:SR Surface mounting plastic box - indoor models onlySR1T Surface mounting plastic box c/w 1 terminalSR01 Surface mount back boxHoneywell Control Systems LtdHoneywell House, Arlington Business Park, Bracknell, Berkshire RG12 1EB, United KingdomTel: 01344 655609 • Fax: 01344 655474Website: www.honeywell.comCertificate No: 262p-(cl-1) to EN 54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.XLS-271 Digital addressable indoor manual call point, surface or flush mounted. 262p/01AccessoriesKAC SR3T-PKAC ETTI-PSurface mounted boxFlush mounted boxHoring LIH Industrial Co LtdNo. 17-6, Ai-Chien Road, Hu-Hsi Village, Yuan-Shan Hsiang (264), Ilan Hsien, Taiwan ROCTel: +886 2 22487599 • Fax: +886 2 22407752Certificate No: 506d to EN 54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.AH-0217 Conventional indoor surface/flush mounting manual call point 506d/01Note: Approved for surface mount use when used with the AHMB-0217 back boxAH-0817 Conventional Type A outdoor Manual Call Point 506d/02Note: Approved for surface mount use when used with the AHMB-0817 back box18 Jan 2014 337

PART 1: SECTION 5MANUAL CALL POINTSAccessories:AHMB-0217 back box for surface mountingAHMB-0817 back box for surface mountingINIM Electronics s.r.l.Via Fosso Antico - Loc, Centobuchi, 63033 Monteprandone (AP), ItalyTel: +39 0735 705007 • Fax: +39 0735 704912E-mail: enea.galiffa@inim.biz • Website: www.inim.bizCertificate No: 991h to EN54-11: 2001 + A1: 2005 & EN54-17: 2005Certificate No: 991j to EN54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.EC0020 Addressable Type A indoor resettable manual call point with short circuit isolator 991h/01IC0020 Conventional Type A indoor resettable manual call point 991j/01Intelligent Safety & Security Technology Ltd.6-7 Ludgate Square,, London EC4M 7AS, United KingdomTel: +44 845 116 2945E-mail: info@isst-uk.com • Website: www.isst-uk.comCertificate No: 512f-(cl-3) to EN54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.CC-01 Conventional manual call point with flashy LED 512f/02CC-02 Conventional manual call point with flashy LED and transparent cover 512f/04Accessories:EM921B1EM921B2EM921B3Regular mounting base, 28mmHigh mounting base, 40mmHigh mounting base, 55mmKAC Alarm Company LimitedKAC House, Thornhill Road, North Moons Moat, Redditch, Worcestershire B98 9ND, United KingdomTel: +44 (0)1527 406655 • Fax: +44 (0)1527 406677E-mail: sales@kac.co.uk OR marketing@kac.co.uk • Website: www.kac.co.ukCertificate No: 166b to EN 54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.WR2001 Indoor manual call point, flush mounted (single pole changeover). 166b/01WR2012 Indoor manual call point, flush mounted. 166b/02WR2004 Indoor manual call point, flush mounted. 166b/03WR2061 Indoor manual call point, flush mounted. 166b/04WR2072 Indoor manual call point, flush mounted. 166b/05WR2101 Indoor manual call point, flush mounted. 166b/06WR3001 Indoor manual call point, flush mounted (single pole changeover). 166b/07WR3101 Indoor manual call point, flush mounted. 166b/08WR3061 Indoor manual call point, flush mounted. 166b/09WR3072 Indoor manual call point, flush mounted. 166b/10WR3631 Indoor manual call point, flush mounted. 166b/11MCP545-1 Indoor surface mounting addressable manual call point 166b/35MCP545-2 Indoor flush mounting addressable manual call point 166b/36MCP545-3 Outdoor surface mounting addressable manual call point 166b/37338 18 Jan 2014

PART 1: SECTION 5MANUAL CALL POINTSCertificated ProductsLPCB Ref.No.MCP545-4 Outdoor surface mounting addressable manual call point 166b/38MCP1A-Rxxxxx-yyyy-zzIS Indoor surface/flush mounting conventional call point 166b/39MCP1B-Rxxxxx-yyyy-zz Indoor surface/flush mounting conventional call point 166b/40MCP2A-Rxxxxx-yyyy-zz Indoor surface/flush mounting conventional call point 166b/41MCP2B-Rxxxxx-yyyy-zz Indoor surface/flush mounting conventional call point 166b/42MCP3A-Rxxxxx-yyyy-zz Indoor surface/flush mounting conventional call point 166b/43MCP4A-R000xx-yyyy-zz Indoor surface/flush mounting conventional call point 166b/44MCP5A-RP01wwxx-yyyyzzIndoor surface/flush mounting addressable call point166b/45Advanced Protocol (and System Sensor 500 series protocol)MCP5A-RP03wwxx-yyyyzzIndoor surface/flush mounting addressable call point166b/47Advanced Protocol (and Honeywell 500 series protocol)Notes:1. ww (Range 0-99 odd numbers only) indicates the communication software protocol2. ww X x indicates mounting ( S =Surface mounted, F =Flush mounted, P =Pattressmounted, 1-4 = Surfacemounted with 1-4 terminals)3. x G (Glass element) x F (Flexible element)4. yyyy (Range A000 to Z999 or STCK for standard stocked product), indicates acustomer account code.Only specific account codes are LPCB approved and indicated by the presence of theLPCB logo placed onthe product label5. zz (Range 0-99) indicates customer marking options detailed on KAC controlleddrawing 08/26396. IS indicates the intrinsically safe version.MCP7A-RC01xx-yyyy-zz Indoor surface/flush mounting conventional call point 166b/49MCP7B-RC01xx-yyyy-zz Indoor surface/flush mounting conventional call point 166b/50WCP1A-RxxxSx-yyyy-zz Outdoor surface mounting conventional waterproof call point 166b/51WCP1B-RxxxSx-yyyy-zz Outdoor surface mounting conventional waterproof call point 166b/52WCP2A-RxxxSx-yyyy-zz Outdoor surface mounting conventional waterproof call point 166b/53WCP2B-RxxxSx-yyyy-zz Outdoor surface mounting conventional waterproof call point 166b/54WCP3A-RxxxSx-yyyy-zz Outdoor surface mounting conventional waterproof call point 166b/55WCP4A-R000Sx-yyyy-zz Outdoor surface mounting conventional waterproof call point 166b/56WCP5A-RPwwSx-yyyy-zz Outdoor surface mounting addressable waterproof call point Advanced Protocol (and 166b/57System Sensor 500 series protocol)WCP5A-RPwwSx-yyyy-zz Outdoor surface mounting addressable waterproof call point Advanced Protocol (and 166b/59Honeywell 500 series protocol)Notes:1. ww (Range 0-99 odd numbers only) indicates the communication softwareprotocol2. S G (Glass element) S F (Flexible element)3. yyyy (Range A000 to Z999 or STCK for standard stocked product),indicates a customer account code. Only specific account codes are LPCBapproved and indicated by thepresence of the LPCB logo placed on the product label4. zz (Range 0-99) indicates customer marking options detailed on KACcontrolled drawing 08/26395. IS indicates the intrinsically safe version.WCP7A-RC01Sx-yyyy-zz Outdoor surface mounting conventional waterproof call point 166b/61WCP7B-RC01Sx-yyyy-zz Outdoor surface mounting conventional waterproof call point 166b/62MCP1A-Rxxxxx-yyyy-zz IIndoor surface/flush mounting conventional call point 166b/39MCP1B-Rxxxxx-yyyy-zzIS Indoor surface/flush mounting conventional call point 166b/40MCP2A-Rxxxxx-yyyy-zzIS Indoor surface/flush mounting conventional call point 166b/41MCP2B-Rxxxxx-yyyy-zzIS Indoor surface/flush mounting conventional call point 166b/42Notes:1. XXX xx indicates the series resistor value039 xx (lowest 39 4K7 xx (highest 4.7 k2. xxx X x indicates mounting ( S =Surface mounted, F =Flush mounted,P =Pattress mounted, 1-4 = Surface mounted with 1-4 terminals3. xxxx G (Glass element) xxxx F (Flexible element)4. yyyy (Range A000 to Z999 or STCK for standard stocked product),indicates a customer account code. Only specificaccount codes are LPCB approved and indicated by thepresence of the LPCB logo placed on the product label5. zz (Range 0-99) indicates customer marking options detailedon KAC controlled drawing 08/26396. IS indicates the intrinsically safe version.MCP3A-Rxxxxx-yyyy-zzIS Indoor surface/flush mounting conventional call point 166b/43Notes:1. XXX xx indicates the electrical configuration ( 000 xx = no resistor, C01 xx = singlepole changeover connections)18 Jan 2014 339

PART 1: SECTION 5MANUAL CALL POINTSCertificated Products2. xxx X x indicates mounting ( S =Surface mounted, F =Flush mounted, P =Pattressmounted, 1-4 = Surface mounted with 1-4 terminals3. xxxx G (Glass element) xxxx F (Flexible element)4. yyyy (Range A000 to Z999 or STCK for standard stocked product), indicates acustomer account code. Only specific account codes are LPCB approved and indicatedby the presence of the LPCB logo placed on the product label5. zz (Range 0-99) indicates customer marking options detailed on KAC controlleddrawing 08/26396. IS indicates the intrinsically safe version.LPCB Ref.No.MCP4A-R000xx-yyyy-zzIS Indoor surface/flush mounting conventional call point 166b/44Notes:1. X x indicates mounting ( S =Surface mounted, F =Flush mounted, P=Pattress mounted,1-4 = Surface mounted with 1-4 terminals)2. x G (Glass element) x F (Flexible element)3. yyyy (Range A000 to Z999 or STCK for standard stocked product), indicates acustomeraccount code. Only specific account codes are LPCB approved and indicatedby thepresence of the LPCB logo placed on the product label4. zz (Range 0-99) indicates customer marking options detailed on KACcontrolled drawing 08/26395. IS indicates the intrinsically safe version.MCP7A-RC01xx-yyyy-zzIS Indoor surface/flush mounting conventional call point 166b/49MCP7B-RC01xx-yyyy-zzIS Indoor surface/flush mounting conventional call point 166b/50Notes:1. X x indicates mounting ( S =Surface mounted, F =Flush mounted,P =Pattress mounted, 1-4 = Surface mounted with 1-4 terminals)2. x G (Glass element) x F (Flexible element)3. yyyy (Range A000 to Z999 or STCK for standard stocked product), indicates acustomer account code. Only specific account codes are LPCB approved and indicatedby thepresence of the LPCB logo placed on the product label4. zz (Range 0-99) indicates customer marking options detailed on KAC controlleddrawing 08/26395. IS indicates the intrinsically safe version.MCP5A-RP07xx-zz Indoor surface/flush mounting addressable call point (Labor Strauss protocol)Advanced Protocol (and Labor Strauss protocol)Notes:1. X x indicates mounting ( S =Surface mounted, F =Flush mounted,P =Pattress mounted, 1-4 = Surface mounted with 1-4 terminals)2. x G (Glass element) x F (Flexible element)3. zz (Range 0-99) indicates customer marking options detailedon KAC controlled drawing 08/2639.166b/67WCP5A-RP07Sx-zz Outdoor surface mounting addressable call point166b/68Advanced Protocol (and Labor Strauss protocol)Notes:1. S G (Glass element) S F (Flexible element) 2. zz (Range 0-99) indicatescustomer marking options detailed on KAC controlled drawing 08/2639.WCP1A-RxxxSx-yyyy-zzIS Outdoor surface mounting conventional waterproof call point 166b/51WCP1B-RxxxSx-yyyy-zzIS Outdoor surface mounting conventional waterproof call point 166b/52WCP2A-RxxxSx-yyyy-zzIS Outdoor surface mounting conventional waterproof call poin 166b/53WCP2B-RxxxSx-yyyy-zzIS Outdoor surface mounting conventional waterproof call point 166b/54Notes:1. XXX xx indicates the series resistor value 039 xx (lowest 39 4K7 xx (highest4.7 k2. xxxS G (Glass element) xxxS F (Flexible element)3. yyyy (Range A000 to Z999 or STCK for standard stocked product), indicates acustomer account code.Only specific account codes are LPCB approved and indicated by thepresence of the LPCB logo placed on the product label4. zz (Range 0-99) indicates customer marking options detailed on KACcontrolled drawing 08/26395. IS indicates the intrinsically safe version.WCP3A-RxxxSx-yyyy-zzIS Outdoor surface mounting conventional waterproof call point 166b/55Notes:1. XXX Sx indicates the electrical configuration ( 000 Sx = no resistor, C01 Sx = singlepole changeover connections)2. xxxS G (Glass element) xxxS F (Flexible element)340 18 Jan 2014

Certificated ProductsPART 1: SECTION 5MANUAL CALL POINTS3. yyyy (Range A000 to Z999 or STCK for standard stocked product), indicates acustomer account code.Only specific account codes are LPCB approved and indicated by the presence of theLPCB Ref.No.LPCB logo placed on the product label4. zz (Range 0-99) indicates customer marking options detailed on KAC controlleddrawing 08/26395. IS indicates the intrinsically safe version.WCP4A-R000Sx-yyyy-zzIS Outdoor surface mounting conventional waterproof call point 166b/56Notes:1. S G (Glass element) S F (Flexible element)2. yyyy (Range A000 to Z999 or STCK for standard stocked product),indicates acustomer account code. Only specific account codes are LPCB approved andindicated by the presence of the LPCB logo placed on the product label3. zz (Range 0-99) indicates customer marking options detailed on KAC controlleddrawing 08/26394. IS indicates the intrinsically safe version.WCP7A-RC01Sx-yyyy-zzIS Outdoor surface mounting conventional waterproof call point 166b/61WCP7B-RC01Sx-yyyy-zzIS Outdoor surface mounting conventional waterproof call point 166b/62Notes:1. S G (Glass element) S F (Flexible element)2. yyyy (Range A000 to Z999 or STCK for standard stocked product),indicates a customer account code. Only specific account codes are LPCBapproved and indicated by the presence of the LPCB logo placed on the product label3. zz (Range 0-99) indicates customer marking options detailed on KAC controlleddrawing 08/26394. IS indicates the intrinsically safe version.MCP5A-RP01yz-K013-01ISMCP5A-RP03yz-K013-01ISIndoor surface/flush mounting addressable call pointSensor 500 series protocol) for use in intrinsically safe systemsIndoor surface/flush mounting addressable call point500 series protocol)for use in intrinsically safe systems166b/65166b/66Notes:1. S z (Surface mounted) F z (Flush mounted)2. y G (Glass element) y F (Flexible element)MCP6H-RC01xx-yyyy-zz Indoor surface/flush mounting conventional call point 166b/69Notes:1. RC01 X x indicates mounting ( S =Surface mounted, F =Flush mounted,P =Pattress mounted, 1-4 = Surface mounted with 1-4 terminals)2. RC01x G (Glass element) RC01x F (Flexible element)3. yyyy (Range A000 to Z999 or STCK for standard stocked product), indicates acustomer account code. Only specificaccount codes are LPCB approved and indicated by the presence of the LPCB logoplaced on the product label4. zz (Range 0-99) indicates customer marking options detailed on KACcontrolled drawing 08/2639.MCP6V-RC01xx-yyyy-zz Indoor surface/flush mounting conventional call point 166b/70Notes:1. RC01 X x indicates mounting ( S =Surface mounted, F =Flush mounted,P =Pattress mounted, 1-4 = Surface mounted with 1-4 terminals)2. RC01x G (Glass element) RC01x F (Flexible element)3. yyyy (Range A000 to Z999 or STCK for standard stocked product), indicates acustomer account code. Only specificaccount codes are LPCB approved and indicated by the presence of the LPCB logoplaced on the product label4. zz (Range 0-99) indicates customer marking options detailed on KACcontrolled drawing 08/2639.Accessories:SRSurface mounting plastic box(1)SR1TSurface mounting plastic box c/w 1 terminal(1)SR2TSurface mounting plastic box c/w 2 terminals(1)SR3TSurface mounting plastic box c/w 3 terminals(1)SR4TSurface mounting plastic box c/w 4 terminals(1)ETT European Terminal Tray ETT1, 2 & 3(1)LEarth Continuity Link(1)M141WSpacer Piece(1)PTRPattress PTR, PTRE, PTR2T, PTR2TE, PTR3T & PTR3TE(1)CHinged Cover(2)Notes:18 Jan 2014 341

PART 1: SECTION 5MANUAL CALL POINTS1. The above accessories are only supplied with MCP 1-7 Seriesmanual call points2. The hinged cover is only supplied with the MCP & WCP Seriesmanual call points optionally indicated by the presence of ‘C’ at theend of the model number.Certificate No: 166e to EN 54-11: 2001 + A1: 2005 and EN 54-17: 2005Certificated ProductsMCP5A-RPwwxx-yyyy-zzMCP5A-RPwwxx-yyyy-zzWCP5A-RPwwSx-yyyy-zzWCP5A-RPwwSx-yyyy-zzIndoor/Outdoor surface/flush mounting addressable call point with short circuit isolatorAdvanced Protocol (and System Sensor 500 series protocol)Indoor/Outdoor surface/flush mounting addressable call point with short circuit isolatorAdvanced Protocol (and Honeywell 500 series protocol)Notes:1. ww (Range 0-99 even numbers only) indicates the communication software protocol2. ww X x indicates mounting ( S =Surface mounted, F =Flush mounted,P =Pattress mounted, 1-4 = Surface mounted with 1-4 terminals)3. x G (Glass element) x F (Flexible element)4. yyyy (Range A000 to Z999 or STCK for standard stocked product),indicates a customer account code. Only specificaccount codes are LPCB approved and indicated by thepresence of the LPCB logo placed on the product label5. zz (Range 0-99) indicates customer marking options detailedon KAC controlled drawing 08/2639.Outdoor surface mounting addressable waterproof call point with short circuit isolatorAdvanced Protocol (and System Sensor 500 series protocol)Outdoor surface mounting addressable waterproof call point with short circuit isolatorAdvanced Protocol (and Honeywell 500 series protocol)Notes:1. ww (Range 0-99 even numbers only) indicates the communication software protocol2. S G (Glass element) S F (Flexible element)3. yyyy (Range A000 to Z999 or STCK for standard stocked product),indicates a customer account code. Only specificaccount codes are LPCB approved and indicated by thepresence of the LPCB logo placed on the product label4. zz (Range 0-99) indicates customer marking options detailedon KAC controlled drawing 08/2639.LPCB Ref.No.166e/01166e/02166e/03166e/04MCP5A-RP08xx-zz Indoor surface/flush mounting addressable call point with short circuit isolatorAdvanced Protocol (and Labor Strauss protocol)Notes:1. X x indicates mounting ( S =Surface mounted, F =Flush mounted,P =Pattress mounted, 1-4 = Surface mounted with 1-4 terminals)2. x G (Glass element) x F (Flexible element)3. zz (Range 0-99) indicates customer marking options detailedon KAC controlled drawing 08/2639.WCP5A-RP08Sx-zz Outdoor surface mounting addressable call point with short circuit isolatorAdvanced Protocol (and Labor Strauss protocol)Notes:1. S G (Glass element) S F (Flexible element)2. zz (Range 0-99) indicates customer marking options detailedon KAC controlled drawing 08/2639.166e/07166e/08Accessories:SR Surface mounting plastic box (1)SR1T Surface mounting plastic box c/w 1 terminal (1)SR2T Surface mounting plastic box c/w 2 terminal (1)SR3T Surface mounting plastic box c/w 3 terminal (1)SR4T Surface mounting plastic box c/w 4 terminal (1)ETT European Terminal Tray ETT 1, 2 & 3 (1)L Earth Continuity Link (1)M141W Spacer Piece (1)PTR Pattress PTR, PTRE, PTR2T, PTR2TE, PTR3T & PTR3TE (1)C Hinged Cover (2)Notes:1. The above accessories are only supplied with MCP Series manual call points2. The hinged cover is supplied with the MCP & WCP Series manual call points optionally indicated by the present of ‘C’ at theend of the model number.342 18 Jan 2014

PART 1: SECTION 5MANUAL CALL POINTSLabor Strauss Sicherungsanlagenbau GmbHWiegelestrasse 36, A-1231 Vienna, AustriaTel: +43 1 52114-44 • Fax: +43 1 52114-27E-mail: andreas.schumacher@lst.at • Website: www.lst.atCertificate No: 928h-(cl-6) to EN 54-11: 2001 + A1: 2002 and EN 54-17: 2005Certificated ProductsFI700/MCPAnalogue addressable Type A re-settable manual call point with short circuit isolator(SR01 and Flush mounting plate)LPCB Ref.No.928h/01AncillariesSR01 Surface mounting boxFlush mounting plateMGC Systems Corp.25 Interchange Way, Vaughan (Toronto), Ontario L4K 5W3, CanadaTel: + 905 660 4655 • Fax: + 905 660 4113E-mail: mcherubin@mircom.com • Website: www.mircom.comCertificate No: 512f to EN 54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.MCP-100 Conventional manual call point with LED and transparent cover 512f/04Morley-IAS Fire Systems by Honeywell (Pittway Systems Technology Group (Europe)Ltd)Charles Avenue, Burgess Hill, West Sussex RH15 9UF, United KingdomTel: +44 (0)1444 230300 • Fax: +44 (0)1444 230888E-mail: sales@morleyias.co.uk • Website: www.morley-ias.co.ukCertificate No: 166e to EN 54-11: 2001 and EN 54-17: 2005Certificate No: 166b to EN 54-11: 2001 + A1: 2005 and EN 54-17: 2005Certificated ProductsMI-MCP-xxxxx-IMI-MCP-xxxxxMI-WCP-R/SxMI-WCP-R/I/SxIndoor surface/flush mounting addressable call point with short circuit isolator.Advanced Protocol Honeywell 500 series protocol)Note:1. xxxxx = GLASS (Glass element) or FLEX_ (Flexible element)Indoor surface/flush mounting addressable call point Advanced Protocol (and Honeywell500 series protocol)Notes:1. xxxxx = GLASS (Glass element) FLEX _ (Flexible element)Outdoor surface mounting addressable waterproof call point Advanced Protocol (andHoneywell 500 series protocol)Notes:1. Sx = S G (Glass element) S F (Flexible element)Outdoor surface mounting addressable waterproof call point with short circuit isolatorAdvanced Protocol (and Honeywell 500 series protocol)Note:LPCB Ref.No.166e/02166b/47166b/59166e/0418 Jan 2014 343

PART 1: SECTION 5MANUAL CALL POINTSCertificated Products1. Sx = S G (Glass element) S F (Flexible element)LPCB Ref.No.Accessories:SR Surface mounting plastic box (1)SR1T Surface mounting plastic box c/w 1 terminal (1)SR2T Surface mounting plastic box c/w 2 terminal (1)SR3T Surface mounting plastic box c/w 3 terminal (1)SR4T Surface mounting plastic box c/w 4 terminal (1)ETT European Terminal Tray ETT 1, 2 & 3 (1)L Earth Continuity Link (1)BZR/1 Bazel Type 1 (1)BZR/2 Bazel Type 2 (1)BZR/3 Bazel Type 3 (1)M141W Spacer Piece (1)PTR Pattress PTR, PTRE, PTR2T, PTR2TE, PTR3T & PTR3TE (1)C Hinged Cover (2)Notes:1. The above accessories are only supplied with MI-MCP-xxxxx & MI-MCP-xxxxx-I manual call point2. The hinged cover may be supplied with all models and is optionally indicated by the presence of ‘C’at the end of the model number.Multron Systems Pte Ltd217 Kallang Bahru, Multron Building, Singapore 339 347, SingaporeTel: +65 6743 2555 / 6395 6868 • Fax: +65 6743 2777 / 6395 6869E-mail: info@multron.com • Website: www.multron.comCertificate No: 548g-(cl-6) to EN 54-11: 2001 + A1: 2005Certificated ProductsMCP-A204Digital addressable re-settable indoor manualcall point, surface and flush mounting (C-92FC)LPCB Ref.No.548g/04AccessoriesC-92FCTransparent coverNitin Ventures FZEP.O. Box 262294, Jebel Ali Free Zone, Dubai, United Arab EmiratesTel: +97 148865858/859 • Fax: +97 148865800E-mail: sales@nitinventures.com • Website: www.nitinfire.comCertificate No: 010w-(cl-1) to EN 54-11: 2001 + A1: 2005 and EN 54-17: 2005Certificate No: 010av-(cl-4) to EN 54-11: 2001 + A1: 2005 and EN 54-17: 2005Certificated ProductsLPCB Ref.No.NV-II-WMCP Discovery analogue addressable waterproof manual call point with short circuit isolator 010w/06NV-II-MCPDiscovery Analogue Addressable Type A Indoor Manual Call Point with Short CircuitIsolator010av/02344 18 Jan 2014

PART 1: SECTION 5MANUAL CALL POINTSNotifier by Honeywell (Pittway Systems Technology Group (Europe) Ltd)Charles Avenue, Burgess Hill, West Sussex RH15 9UF, United KingdomTel: +44 (0)1444 230300 • Fax: +44 (0)1444 230888E-mail: sales@notifiersystems.co.uk • Website: www.notifierfiresystems.co.ukCertificate No: 166e to EN 54-11: 2001 + A1: 2005 and EN 54-17: 2005Certificate No: 166b to EN 54-11: 2001 + A1: 2005Certificated ProductsM700KACI-xxM700KAC-xxM700WCP-R/I/SxIndoor surface/flush mounting addressable call point with short circuit isolator AdvancedProtocol (and System Sensor 500 series protocol)Notes:1. xx = S x (Surface mounted) F x (Flush mounted)2. xx = x G (Glass element) x F (Flexible element)3. The above manual call point is approved with three micro-switches(Honeywell ZM10E50A01, Otehall 294/20/150/G and Burgess X4G31051BBAQ)Indoor surface/flush mounting addressable call point Advanced ProtocolSystem Sensor 500 series protocol)Notes:1. xx = S x (Surface mounted) F x (Flush mounted)2. xx = x G (Glass element) x F (Flexible element)Outdoor surface mounting addressable waterproof call pointwith short circuit isolator Advanced Protocol System Sensor 500 series protocol)Note:1. S x = S G (Glass Element) S F (Flexible Element)LPCB Ref.No.166e/01166b/45166e/03Accessories:SR Surface mounting plastic box (1)SR1T Surface mounting plastic box c/w 1 terminal (1)SR2T Surface mounting plastic box c/w 2 terminal (1)SR3T Surface mounting plastic box c/w 3 terminal (1)SR4T Surface mounting plastic box c/w 4 terminal (1)ETT European Terminal Tray ETT 1, 2 & 3 (1)L Earth Continuity Link (1)BZR/1 Bazel Type 1 (1)BZR/2 Bazel Type 2 (1)BZR/3 Bazel Type 3 (1)M141W Spacer Piece (1)PTR Pattress PTR, PTRE, PTR2T, PTR2TE, PTR3T & PTR3TE (1)C Hinged Cover (2)Notes:1. The above accessories are only supplied with M700KAC-xx & M700KACI-xx manual call points2. The hinged cover may be supplied with all models and is optionally indicated by the precence of 'C'at the end of the model number.Pelco Finland OySokerilinnantie 11C, 02600, Espoo, FinlandTel: +358 10 446 511 • Fax: +358 10 446 5103E-mail: info.fi@pelco.com • Website: www.pelco.com/nordicCertificate No: 010n-(cl-1) to EN 54-11: 2001 + A1: 2005Certificate No: 010av-(cl-3) to EN 54-11: 2001 + A1: 2005 and EN 54-17: 2005Certificated ProductsLPCB Ref.No.EPP-23E ESMI Intellia analogue addressable waterproof manual call point 010n/08EPP-23P PELCO Intellia analogue addressable waterproof manual call point 010n/08EPP-20ADiscovery Analogue Addressable Type A Indoor Manual Call Point with Short CircuitIsolator010av/0218 Jan 2014 345

PART 1: SECTION 5MANUAL CALL POINTSProtec Fire Detection plcProtec House, Churchill Way, Nelson, Lancashire BB9 6RT, United KingdomTel: +44 (0)1282 717171 • Fax: +44 (0)1282 717273E-mail: sales@protec.co.uk • Website: www.protec.co.ukCertificate No: 201ae to EN5-11: 2001 + A1: 2005 and EN 54-17: 2005Certificated Products6000/MCP6000/MCP/NL6000/MCP/EXPAnalogue addressable indoor break glass unit(N 63-111-48 mounting box)Analogue addressable indoor break glass unit Dutch version(N 63-111-48 mounting box)Analogue addressable indoor break glass unit Export version(N 63-111-48 mounting box)LPCB Ref.No.201ae/01201ae/02201ae/03Accessories:N 63-111-48 Surface mounting back boxRavel Electronics LtdUnit 11, Chancel Industrial Estate, Newhall Street, Willenhall WV13 1NX, United KingdomTel: 0845 835 8855E-mail: exportsales@ravelfire.co.ukCertificate No: 512f-(cl-4) to EN54-11: 2001 + A1: 2005Manual Call pointsCertificated ProductsLPCB Ref.No.RE-736FF Conventional manual call point with flashy LED and transparent cover 512f/04AccessoriesEM921B1EM921B2EM921B3Regular mounting base, 28mmHigh mounting base, 40mmHigh mounting base, 55mmSafety Technology International (Europe) LimitedUnit 49G Pipers Road, Park Farm Industrial Estate, Redditch, Worcestershire B98 0HU, United KingdomTel: +44 (0)1527 520999 • Fax: +44 (0)1527 501999E-mail: sales@sti-europe.com • Website: www.sti-europe.comCertificate No: 653a to EN 54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.Series 01 Conventional Type A re-settable indoor flush/surface mounted manual call point 653a/01Notes:1) Flush mount approved model RP-RF-01 (M200)2) Surface mount approved model RP-RS-01 (M200 + M125)3) Surface mount approved model RP-RS1-01 (M223)4) Approved colour, red onlyAccessoriesM200 wall plateM125 back boxM223 back box346 18 Jan 2014

PART 1: SECTION 5MANUAL CALL POINTSSareme UABNaugarduko str. 32/2, Vilnius LT2006, LithuaniaTel: +3705 2135047 • Fax: +3705 2333567E-mail: valdemar@sareme.ltCertificate No: 512f to EN 54-11:2001 + A1:2005Certificated ProductsLPCB Ref.No.SF MCP127 Conventional manual call point with LED 512f/01SF MCP127-F Conventional manual call point with flashy LED 512f/02SF MCP127-TC Conventional manual call point with LED and transparent cover 512f/03SF MCP127-FTC Conventional manual call point with flashy LED and transparent cover 512f/04AccessoriesSF MCP127-B1 Regular mounting base, 28mmSF MCP127-B2 High mounting base, 40mmSF MCP127-B3 High mounting base, 55mSchrack Seconet AGEibesbrunnergasse 18, A112 Wien, AustriaTel: +43-1-81157-0E-mail: office@schrack-seconet.comCertificate No: 166b to EN 54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.MCP545-1 Indoor surface mounting addressable manual call point 166b/35MCP545-2 Indoor flush mounting addressable manual call point 166b/36Securiton AGAlpenstrasse 20, CH-3052 Zollikofen, Berne, SwitzerlandTel: +41 31 9101122 • Fax: +41 31 9101616E-mail: info@securiton.chCertificate No: 166b to EN 54-11: 2001 + A1: 2006Certificated ProductsLPCB Ref.No.MCP545-1 Indoor surface mounting addressable manual call point 166b/35MCP545 Indoor flush mounting addressable manual call point 166b/36SHIELD FIRE, SAFETY AND SECURITY LTDRedburn House, 2a Tonbridge Road, Romford, Essex RM3 8QE, United KingdomTel: +44 207 712 1610 • Fax: +44 207 712 1578E-mail: shielduk@shieldglobal.com • Website: www.shieldglobal.comCertificate No: 548g-(cl-4) to EN 54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.BG-A450 Intelligent manual call point 548g/0218 Jan 2014 347

PART 1: SECTION 5MANUAL CALL POINTSCertificated ProductsLPCB Ref.No.BG-C440 Conventional manual call point 548g/01Siemens Switzerland Limited, Building Technologies DivisionInternational Headquarters, Gubelstrasse 22, CH-6301 Zug, SwitzerlandTel: +41 (0) 41 724 24 24 • Fax: +41 (0) 41 724 35 22Certificate No: 126w-(cl-1) to EN 54-11: 2001 + A1: 2005Certificate No: 166b to EN 54-11: 2001Certificate No: 126ap-(cl-1) to EN 54-11: 2001 + A1: 2005 and EN 54-17: 2005Certificate No: 126as to EN 54-11: 2001 + A1: 2005Certificate No: 126ax-(cl-1) to EN 54-11: 2002 + A1: 2005 and EN 54-17: 2005Certificate No: 531j-(cl-1) to EN 54-11: 2001 + A1: 2005Certificate No: 531k-(cl-1) to EN 54-11:2001 + A1: 2005 & EN 54-17:2005Certificated ProductsLPCB Ref.No.DM1154 Ex Addressable interactive manual call point 126w/01MT320C Conventional indoor and outdoor manual call point 126w/03DM1154H-Ex Addressable interactive manual call point (DMZ1197-AC) 126w/12MT320C Indoor manual call point, flush mounted (single pole changeover) 166b/07DM1101 Indoor manual call point, flush mounted (DMZ1191 mounting box) 166b/11FDM225-RPDigital addressable Type A indoor/outdoor manual call point with resettable plastic 126ap/01element and incorporating a short circuit isolator (FDMH295-R and FDMH295-S)FDM225-RGDigital addressable Type A indoor/outdoor manual call point with resettable glass126ap/02element and incorporating a short circuit isolator(FDMH295-R and FDMH295-S)FDM226-RPDigital addressable Type A indoor/outdoor manual call point with resettable plastic 126ap/03element and incorporating a short circuit isolator (including housing base)FDM226-RGDigital addressable Type A indoor/outdoor manual call point with resettable plastic 126ap/04element and incorporating a short circuit isolator (including housing base)FDM224Digital addressable Type A indoor/outdoor manual call point with resettable glass126ap/05element and incorporating short circuit isolator (DMZ1197-AC and DMZ1195)FDM224HDigital addressable Type A indoor/outdoor manual call point with resettable glass126ap/06element and incorporating short circuit isolator (DMZ1197-AC and DMZ1197-AD)FDM221Digital addressable Type A indoor/outdoor manual call point with resettable glass126ap/07element and incorporating short circuit isolator (FDMC291 and FDMK291)FDM223Digital addressable Type B indoor/outdoor manual call point with resettable glass126ap/08element and incorporating short circuit isolator (DMZ1197-AC and DMZ1195)FDM223HDigital addressable Type B indoor/outdoor manual call point with resettable glass126ap/09element and incorporating short circuit isolator (DMZ1197-AC)FDM225 RP (F)Digital addressable Type A indoor/outdoor manual call point with re-settable plastic 126ap/10element and incorporating short circuit isolator; French labelling on re-settable plasticelement (FDMH295-R and FDMH295-S)FDM225-RG (F)Digital addressable Type A indoor/outdoor manual call point with non-resettable glass 126ap/11element and incorporating a short circuit isolator; French labelling on non-resettableglass element(FDMH295-R and FDMH295-S)FDM1101-RG Collective Type A Indoor / Outdoor Manual Call Point with Non-Resettable Glass Element 126as/01FDM1101-RP Collective Type A Indoor / Outdoor Manual Call Point with Resettable Plastic Element. 126as/02FDM1101A-RGConventional Type A Indoor / Outdoor Manual Call Point with Non-Resettable Glass 126as/03Element.FDM1101A-RP Conventional Type A Indoor / Outdoor Manual Call Point with Resettable Plastic Element. 126as/04FDM1101-RG(F)Collective Type A Indoor / Outdoor Manual Call Point with Non-Resettable Glass126as/05Element.FDM1101-RP(F)Collective Type A Indoor / Outdoor Manual Call Point with Resettable Plastic Element; 126as/06French labelling on Resettable Plastic Element.DM1131 Analogue addressable indoor and outdoor manual call point with short circuit isolator 126ax/01DM1151 Interactive indoor and outdoor manual call point with short circuit isolator 126ax/02DM1134 Addressable indoor and outdoor manual call point with short circuit isolator 126ax/03DM1154 Interactive indoor and outdoor manual call point with short circuit isolator 126ax/04DM1134HAnalogue addressable indoor and outdoor manual call point with short circuit isolator 126ax/05(DMZ1197-AC)DM1154HInteractive indoor and outdoor manual call point with short circuit isolator126ax/06(DMZ1197-AC)DM1101 Conventional indoor and outdoor manual call point 531j/01DM1104 Conventional indoor and outdoor manual call point 531j/02DM1104H Conventional indoor and outdoor manual call point (DMZ1197-AC) 531j/03348 18 Jan 2014

PART 1: SECTION 5MANUAL CALL POINTSCertificated ProductsLPCB Ref.No.MT320C Conventional indoor and outdoor manual call point 531j/04DM1131Analogue addressable type A indoor and outdoor manual call point with short circuit 531k/01isolatorDM1134HAnalogue addressable type A indoor and outdoor manual call point with short circuit 531k/03isolator (DMZ1197-AC)DM1151 Interactive type A indoor and outdoor manual call point with short circuit isolator 531k/04DM1154 Interactive type A indoor and outdoor manual call point with short circuit isolator 531k/05DM1154HInteractive type A indoor and outdoor manual call point with short circuit isolator531k/06(DMZ1197-AC)FDM221Digital addressable type A indoor/outdoor manual call point with re-settable glass531k/07element and incorporating short circuit isolator (FDMC291 and FDMK291)FDM223Digital addressable type B indoor/outdoor manual call point with re-settable glass531k/08element and incorporating short circuit isolator (DMZ1197-AC and DMZ1195)FDM223HDigital addressable type B indoor/outdoor manual call point with re-settable glass531k/09element and incorporating short circuit isolator (DMZ1197-AC)FDM224Digital addressable type A indoor/outdoor manual call point with re-settable glass531k/10element and incorporating short circuit isolator (DMZ1197-AC and DMZ1195)FDM224HDigital addressable type A indoor/outdoor manual call point with re-settable glass531k/11element and incorporating short circuit isolator (DMZ1197-AC and DMZ1197-AD)DM1134 Addressable type A indoor and outdoor manual call point with short circuit isolator 531k/02Accessories:FDMC291 protective coverFDMK291 key with coverDMZ1197-AC protective coverDMZ1195 keyDMZ1197-AD seal for wet areasBases:FDMH295-R Housing baseFDMH295-S Housing base with holes and socketsSMS (Novar Systems Ltd)Hamilton Industrial Park, 140 Waterside Road, Leicester LE5 1TN, United KingdomTel: +44 (0)116 246 2100 • Fax: +44 (0)116 246 2016Website: www.smsfire.co.ukCertificate No: 042aq to EN54-11: 2001+ A1:2005Certificated ProductsSEN-800SEN-805Analogue addressable Type A indoor manual call point(SEN-895 surface mount back box)Note:Approved for use with glass non re-settable elementAnalogue addressable Type A indoor manual call point(SEN-895 surface mount back box)Note:Approved for use with plastic re-settable elementLPCB Ref.No.042aq/01042aq/05Accessories:SEN-895Surface mount back boxSterling Safety SystemsUnit B12a, Holly Farm Business Park, Honiley, Warwickshire CV8 1NP, United KingdomTel: +44(0)1926485282 • Fax: +44(0)1926485090E-mail: info@sterlingsafety.co.uk • Website: www.sterlingsafety.co.ukCertificate No: 928h to EN 54-11: 2001 + A1: 2002 and EN 54-17: 2005Certificate No: 928p-(cl-5) to EN 54-11: 2001 + A1: 2005 and EN 54-25: 200818 Jan 2014 349

PART 1: SECTION 5MANUAL CALL POINTSCertificated ProductsHFI-CP-01HFW-CP-01Analogue addressable Type A indoor re-settable manual call point with short circuitisolator (SR01 and Flush mounting plate)Wireless type A resettable indoor manual call point(SRO1 surface mount back box)Note:1.The device must be used with the following batteries only:CR123A (3Vdc) - main batteryCR2032A (3Vdc) - secondaryLPCB Ref.No.928h/01928p/01AncillariesSR01 Surface mounting boxFlush mounting plateSynaps Technology SrlPadriciano 99 c/o Area Science Park, Trieste 34149, ItalyTel: 0039 040 3755360 • Fax: 0039 040 3755361E-mail: info@synaps-technology.com • Website: www.synaps-technology.comCertificate No: 959a to EN 54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.SyCALL R6847L Conventional type A indoor manual call point 959a/01AncillariesDeep back boxSafety coverWall flush mount plate (white only) and external trim frame (white only)Teledata S.r.l.Via Giulietti 8, Milan 20132, ItalyTel: +39 02-27201352 • Fax: +39 02-2593704E-mail: info@teledata-i.com • Website: www.teledate-i.comCertificate No: 928h-(cl-7) to EN 54-11: 2001 + A1: 2005 and EN 54-17: 2005Certificated ProductsFDVCP100Analogue addressable Type A resettable indoor manual call point with short circuitisolator (SR01 and Flush mounting plate)LPCB Ref.No.928h/01AncillariesSR01 Surface mounting boxFlush mounting plateThorn Security Limited, trading as Tyco Safety ProductsDunhams Lane, Letchworth SG6 1BD, United KingdomTel: +44 (0)1462 667700 • Fax: +44 (0)1462 667777E-mail: mashbury@tycoint.com • Website: www.tycosafetyproducts-europe.comCertificate No: 681n-(cl-1) to EN 54-11: 2001 + A1: 2005Certificate No: 166b to EN 54-11: 2001 + A1: 2005Certificate No: 166k-(cl-1) to EN 54-11: 2001 + A1: 2005 and EN 54-17: 2005Certificate No: 681ab-(cl-1) to EN 54-11: 2001 + A1:2005 and EN 54-17: 2005350 18 Jan 2014

PART 1: SECTION 5MANUAL CALL POINTSCertificated ProductsLPCB Ref.No.CP820 Addressable Type A indoor manual call point 681n/01CP830 Addressable Type A outdoor manual call point 681n/02MCP200 Indoor surface/flush mounting conventional call point 166b/41MCP210 Indoor surface/flush mounting conventional call point 166b/41MCP250M Indoor/outdoor surface/flush mounting conventional call point Marine model 166b/41MCP230 Outdoor surface mounting conventional waterproof call point 166b/53MCP260M Outdoor surface mounting conventional waterproof call point Marine model 166b/53MCP820Indoor surface/flush mounting analogue addressable166k/01Type A call point with short circuit isolatorMCP820MIndoor surface/flush mounting analogue addressable166k/02Type A call point with short circuit isolator (Marine Version)MCP830Outdoor surface mounting analogue addressable681ab/01Type A call point with short circuit isolatorMCP830MOutdoor surface mounting analogue addressableType A call point with short circuit isolator (Marine Version)681ab/02UTC Fire & Security BVKelvinstraat 7, NL-6003DH, Weert, The NetherlandsTel: + 31 495 58 30 00 • Fax: + 31 495 55 00 42E-mail: Daragh.O'Donnell@fs.utc.com • Website: www.utcfireandsecurity.comCertificate No: 092r-(cl-3) to EN 54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.ZP787-3 Analogue addressable manual call point, Labelled Ziton 092r/02Accessories:DMN782 Hinged transparent MCP protection coverDMN715 EN 54 universal MCP glassDMN784 Call point test keyDMN800 Resettable elementZP787-3-SW Analogue addressable manual call point, Labelled Ziton 092r/02Accessories:DMN782 Hinged transparent MCP protection coverDMN715 EN 54 universal MCP glassDMN784 Call point test keyDMN800 Resettable elementEA787-3 Analogue addressable manual call point, Labelled EST 092r/02Accessories:DMN782 Hinged transparent MCP protection coverDMN715 EN 54 universal MCP glassDMN784 Call point test keyDMN800 Resettable elementEA787-3-18 Analogue addressable manual call point, Labelled EST 092r/02Accessories:DMN782 Hinged transparent MCP protection coverDMN715 EN 54 universal MCP glassDMN784 Call point test keyDMN800 Resettable elementZP785-3 Analogue addressable indoor manual call point, Labelled Ziton 092r/01Accessories:DMN787 Surface mounting box with earth terminal, redDM790 Flush mount cradle with connectorsDM795 Flush mount cradle with connectors and forkgripsDMN782 Hinged transparent MCP protection coverDMN715 EN 54 universal MCP glassDMN784 Call point test keyDMN800 Resettable elementBGUI2000LED Analogue addressable indoor manual call point, Labelled Photain Controls 092r/01Accessories:DMN787 Surface mounting box with earth terminal, red18 Jan 2014 351

PART 1: SECTION 5MANUAL CALL POINTSCertificated ProductsLPCB Ref.No.DM790 Flush mount cradle with connectorsDM795 Flush mount cradle with connectors and forkgripsDMN782 Hinged transparent MCP protection coverDMN715 EN 54 universal MCP glassDMN784 Call point test keyDMN800 Resettable elementEA785-3 Analogue addressable indoor manual call point, Labelled EST 092r/01Accessories:DMN787 Surface mounting box with earth terminal, redDM790 Flush mount cradle with connectorsDM795 Flush mount cradle with connectors and forkgripsDMN782 Hinged transparent MCP protection coverDMN715 EN 54 universal MCP glassDMN784 Call point test keyDMN800 Resettable elementEA785-3-18 Analogue addressable indoor manual call point, Labelled EST 092r/01Accessories:DMN787 Surface mounting box with earth terminal, redDM790 Flush mount cradle with connectorsDM795 Flush mount cradle with connectors and forkgripsDMN782 Hinged transparent MCP protection coverDMN715 EN 54 universal MCP glassDMN784 Call point test keyDMN800 Resettable elementZP785-3S-SW Analogue addressable indoor manual call point, Labelled Ziton 092r/01Accessories:DMN787 Surface mounting box with earth terminal, redDM790 Flush mount cradle with connectorsDM795 Flush mount cradle with connectors and forkgripsDMN782 Hinged transparent MCP protection coverDMN715 EN 54 universal MCP glassDMN784 Call point test keyDMN800 Resettable elementCL785-3 Analogue addressable indoor manual call point, Labelled Clymac 092r/01Accessories:DMN787 Surface mounting box with earth terminal, redDM790 Flush mount cradle with connectorsDM795 Flush mount cradle with connectors and forkgripsDMN782 Hinged transparent MCP protection coverDMN715 EN 54 universal MCP glassDMN784 Call point test keyDMN800 Resettable elementZP785-3S30 Analogue addressable indoor manual call point, Labelled Ziton 092r/01Accessories:DMN787 Surface mounting box with earth terminal, redDM790 Flush mount cradle with connectorsDM795 Flush mount cradle with connectors and forkgripsDMN782 Hinged transparent MCP protection coverDMN715 EN 54 universal MCP glassDMN784 Call point test keyDMN800 Resettable elementZP787-3S30 Analogue addressable outdoor manual call point, Labelled Ziton 092r/02Accessories:DMN782 Hinged transparent MCP protection coverDMN715 EN 54 universal MCP glassDMN784 Call point test keyDMN800 Resettable element352 18 Jan 2014

PART 1: SECTION 5MANUAL CALL POINTSUTC Fire & Security Inc. Trading as Edwards Systems Technology8985 Town Center Parkway, Bradenton, Florida FL34202, USATel: 941 739-42228Website: www.fs.utc.comCertificate No: 262p-(cl-2) to EN 54-11: 2001 + A1: 2005Certificated ProductsLPCB Ref.No.SIGI-271-xx Digital addressable indoor manual call point, surface or flush mounted. 262p/01Note:Key: xx denotes special language markings.Blank = No additional markings18 = Polish markingsAccessories:KAC SR3T-P Surface mounted boxKAC ETTI-P Flush mounted boxZeta Alarm Systems by GLT Exports LimitedDetection House, 72-78 Morfa Road, Swansea SA1 2EN, United KingdomTel: +44 (0)1792 455175 • Fax: +44 (0)1792 455176E-mail: ghassan@gltexports.com • Website: www.gltexports.comCertificate No: 653a-(cl-1) to EN 54-11: 2001 + A1: 2005Certificate No: 330m to EN 54-11: 2001, EN 54-17: 2005Certificated ProductsLPCB Ref.No.ZT-CP3 Conventional Type A re-settable indoor flush/surface manual call point. 653a/01Notes:1. Flush mount approved model ZT-CP3/F (M200)2. Surface mount approved model ZT-CP3 (M223)3. Approved colour, red onlyZT-CP3/AD Addressable Indoor Type A Manual Call Point with Short Circuit Isolator 330m/01AccessoriesM200 wall plateM223 back box18 Jan 2014 353

PART 1: SECTION 6LINE UNITSA Line Unit is the term given to define devices used for functions other than fire detection, which areconnected to a fire detection and alarm system transmission path or within other components of the firedetection and alarm system e.g. inside Control and Indicating Equipment. For example, the following devicesmay be regarded as Line Units:short circuit isolatorsinput/output interfacesShort-circuit isolators are used to limit the consequences of low parallel resistance faults between the lines ofa transmission path of a fire detection and fire alarm system. The transmission path is normally in a loopconfiguration which is separated into sections by the short circuit isolators, such that a detected fault in aparticular section will isolate that particular section allowing other components in other sections on the loop tofunction correctly.Input/output devices are intended for different applications, and may therefore have different functions. Theirfunctions are specified by the manufacturer and they are tested and approved against this specification.This section lists approved Line Units which are connected to a fire detection and alarm system. The initialapproval and continued approval processes for Line Units are outlined in scheme document SD038.Products listed in this section have been approved to: EN 54-17: 2005 Short-circuit isolators EN 54-18: 2005 Input/output devices EN 54-25: 2008 Components using radio linksAudit:Regular product auditing and regular factory inspections are carried out by LPCB ensuring high manufacturingstandards and continued compliance with the applicable product standard.Notes:1. It is recommended that short circuit isolators and input/output devices are certificated to EN 54-17: 2005and EN 54-18: 2005 respectively. EN 54-17: 2005 and EN 54-18: 2005 are now harmonised standards forthe Construction Products Directive and CE marking is required for most of the European market by 1December 2008. It is therefore recommended that devices are certificated to EN 54-17: 2005 or EN 54-18: 2005 where applicable as soon as possible.2. EN 54-25: 2008 is now a harmonised standard for the Construction Products Directive and CE marking isrequired for most of the European market since 1 March 2011. It is therefore recommended that radio linkcomponents are certificated to EN 54- 25: 20083. Since the LPCB uses national and international standards for the listing of products, in some instancesthe requirements of these standards may conflict with the recommendations of local codes of practice. Werecommend that specifiers seek advice from the relevant local authorities and amend their specificationsaccordingly.Advanced Electronics Limited34 Moorland Way, Nelson Park, Cramlington, Northumberland NE23 1WE, United KingdomTel: +44 (0)1670 707 111 • Fax: +44 (0)1670 707 222E-mail: ksewell@advel.co.uk • Website: www.Advel.co.ukCertificate No: 010aa to EN 54-17: 2005Certificate No: 010ag to EN 54-18: 2005Certificate No: 928n-(cl-1) to EN 54-18: 2005, EN 54-17: 2005 and EN 54-25: 2008Certificate No: 928r-(cl-1) to EN 54-18: 2005 and EN 54-25: 2008354 18 Jan 2014

PART 1: SECTION 6LINE UNITSCertificated ProductsLPCB Ref.No.55000-802ADV DIN-Rail Mounted Dual Isolator 010aa/0655000-182ADV DIN-Rail Sounder Controller (5 Amperes) 010ag/0855000-803ADVDIN-Rail Mounted Input/Output Unit010ag/10Note: to ensure compliance is maintained, this device shall be installed within anenclosure weighing greater than 4.75kg55000-822ADV DIN-Rail Mounted Switch Monitor 010ag/1320-VW2W100-ADV Wire to wireless translator module 928n/0120-SGCWE100-ADV Wireless conventional system Expander module 928r/0120-SGWE100-ADV Wireless Expander module 928r/02Advantronic Systems S.L.C/Yunque 9 Nave B1, Tres Cantos, Madrid 28760, SpainTel: +34 91 806 2343 • Fax: +34 91 803 1171E-mail: jpedrouzo@advantronic.es • Website: www.advantronic.esCertificate No: 928n-(cl-2) to EN 54-18: 2005, EN 54-17: 2005 and EN 54-25: 2008Certificate No: 928r-(cl-2) to EN 54-18: 2005 and EN 54-25: 2008Certificated ProductsLPCB Ref.No.AVW190AL Wire to wireless translator module 928n/01AVW191AL Wireless convetional system Expander module 928r/01AVW192AL Wireless Expander module 928r/02AMPAC Technologies PTY Ltd7 Ledgar Road, Balcatta 6021, AustraliaTel: +618 (9242) 3333 • Fax: +618 (9242) 3334E-mail: info@ampac.net • Website: www.ampac.netCertificate No: 010aa-(cl-3) to EN 54-17: 2005Certificate No: 010ag-(cl-2) to EN54-18: 2005Certificate No: 010ah-(cl-5) to EN 54-17: 2005 and EN 54-18: 2005Certificate No: 010ak-(cl-3) to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificated ProductsLPCB Ref.No.45681-517AMP Enhanced deep isolating base (White) 010aa/0745681-518AMP Enhanced deep isolating base (Red) 010aa/0845681-245AMP Conventional standard relay base 010ag/0255000-588AMP Analogue addressable 3 channel input/output unit with isolator 010ah/0155000-841AMP Analogue addressable switch monitor plus with isolator 010ah/0355000-843AMP Analogue addressable switch monitor with isolator 010ah/0455000-845AMP Analogue addressable zone monitor unit with isolator 010ah/0555000-847AMP Analogue addressable input/output unit with isolator 010ah/0655000-849AMP Analogue addressable output unit with isolator 010ah/0755000-852AMP Analogue addressable sounder controller with isolator 010ah/0855000-760AMP Analogue addressable mini switch monitor with isolator 010ah/0955000-001AMPIntelligent Type B open area sounder (Red)010ak/01(45681-518AMP enhanced deep isolating bases)Note:1. Meets the requirements of EN 54-3:2001 at the following tones:Apollo standard - 840Hz, 0.5s / 558Hz, 0.5sDutch (slow whoop) - 500-1200Hz in 3.5s, 0.5s offGerman DIN - 1200-500Hz over 1s58000-005AMPIntelligent Type B open area sounder beacon (Red)010ak/05(45681-518AMP enhanced deep isolating bases)Note:1. Meets the requirements of EN 54-3:2001 at the following tones:T1- Apollo Evacuation 558Hz, 0.5 s / 840Hz, 0.5sT3- Dutch Slow Whoop 500-1200Hz in 3.5s, 0.5s offT4- German DIN1200 - 500Hz over 1s18 Jan 2014 355

PART 1: SECTION 6LINE UNITSCertificated Products58000-007AMPIntelligent Type B open area sounder beacon (White)(45681-517AMP enhanced deep isolating bases)Note:1. Meets the requirements of EN 54-3:2001 at the following tones:T1- Apollo Evacuation 558Hz, 0.5s / 840Hz, 0.5sT3- Dutch Slow Whoop 500-1200Hz in 3.5s, 0.5s offT4- German DIN1200-500Hz over 1sLPCB Ref.No.010ak/06Bases:45681-517AMP Enhanced deep isolating bases (White)45681-518AMP Enhanced deep isolating bases (Red)Apollo Fire Detectors Limited36 Brookside Road, Havant, Hampshire PO9 1JR, United KingdomTel: +44 (0)2392 492412 • Fax: +44 (0)2392 492754E-mail: enquiries@apollo-fire.co.ukSales Enquiries GermanyApollo Deutschland GmbHTel: +49 5241 330 60 • Fax: +49 5241 330 629E-mail: info@apollo-feuer.deSales Enquiries Spain,Apollo EspanaTel: +34 627 988 061 • Fax: +34 949 335 289E-mail: apollo.espana@apollo-fire.comSales Enquiries China,Apollo Fire Detectors Limited,, Shanghai representative officeTel: +86 21 5237 0922 • Fax: +86 21 5237 0920E-mail: tony.ye@apollo-fire.comCertificate No: 010aa to EN 54-17:2005Certificate No: 010ag to EN54-18: 2005Certificate No: 010ah to EN54-17: 2005 & EN54-18: 2005Certificated ProductsLPCB Ref.No.45681-284 XP95/Discovery short circuit isolating base 010aa/0155000-875 XP95 analogue addressable mains switch input/output unit 010ag/1655000-588 XP95 analogue addressable 3 channel input/output unit with isolator 010ah/0155000-841 XP95 analogue addressable switch monitor plus with isolator 010ah/0355000-843 XP95 analogue addressable switch monitor with isolator 010ah/0455000-845 XP95 analogue addressable zone monitor unit with isolator 010ah/0555000-847 XP95 analogue addressable input/output unit with isolator 010ah/0655000-849 XP95 analogue addressable output unit with isolator 010ah/0755000-852 XP95 analogue addressable sounder controller with isolator 010ah/0845681-321 XP95 20D negative short circuit isolating base 010aa/0245681-323 XP95 20D positive short circuit isolating base 010aa/0355000-710 XP95 20D positive short circuit isolator 010aa/0455000-720 XP95 20D negative short circuit isolator (45681-211 Base) 010aa/0555000-802 XP95 analogue addressable DIN-rail dual isolator 010aa/0655000-812 XP95 analogue addressable DIN-rail zone monitor 010ah/0255000-181 XP95 analogue addressable DIN-rail 8A sounder controller unit 010ag/0755000-182 XP95 analogue addressable DIN-rail sounder control unit 010ag/0855000-821 XP95 analogue addressable DIN-rail switch monitor plus 010ag/1255000-822 XP95 analogue addressable DIN-rail switch monitor 010ag/1355000-855 XP95 analogue addressable DIN-rail protocol translator - single 010ag/14Note: to ensure compliance is maintained, all connecting cables to the protocol translator356 18 Jan 2014

PART 1: SECTION 6LINE UNITSCertificated ProductsLPCB Ref.No.shall be less than 3m.55000-856 XP95 analogue addressable DIN-rail protocol translator - dual 010ag/15Note: to ensure compliance is maintained, all connecting cables to the protocol translatorshall be less than 3m.55000-760 XP95/Discovery Analogue addressable mini switch monitor with isolator 010ah/0945681-517 Enhanced deep isolating base (White) 010aa/0745681-518 Enhanced deep isolating base (Red) 010aa/0845681-242 XP95 analogue addressable low power relay base 010ag/0145681-245 S65 conventional standard relay base 010ag/0245681-246 S65 conventional auxiliary relay base 010ag/0345681-247 S65 conventional end of line 12V relay base 010ag/0445681-248 S65 conventional end of line 24V relay base 010ag/0545681-508 S65 conventional 12V relay base 010ag/06ORB-RB-10004 Orbis TimeSaver relay base 010ag/17ORB-SW-10005 Orbis Sav-wire base 010ag/1855000-797 XP95 analogue addressable DIN-rail mains input/output unit 010ag/09Note: to ensure compliance is maintained, this device shall be installed within anenclosure weighing greater than 4.75kg.55000-803 XP95 analogue addressable DIN-rail input/output unit 010ag/10Note: to ensure compliance is maintained, this device shall be installed within anenclosure weighing greater than 4.75kg.55000-804 XP95 analogue addressable DIN-rail output unit 010ag/11Note: to ensure compliance is maintained, this device shall be installed within anenclosure weighing greater than 4.75kg.55000-864 XP95 analogue addressable locally powered zone montior unit with isolator 010ah/10Argus Security S.r.l.Via del Canneto 14, Valle delle Noghere, 34015 Muggia, Trieste, ItalyTel: +39 (0) 402821110 • Fax: +39 (0) 402823483E-mail: dcresseri@argussecurity.it • Website: www.argussecurity.itCertificate No: 928n to EN 54-18: 2005, EN 54-17: 2005 and EN 54-25: 2008Certificate No: 928r to EN 54-18: 2005 and EN 54-25: 2008Certificated ProductsLPCB Ref.No.VW2W100 Wire to wireless translator module 928n/01SGCWE100 Wireless conventional system Expander module 928r/01SGWE100 Wireless Expander module 928r/02Argus-Spectrum65 Serdobolskaya St, St. Petersburg 197342, Russian FederationTel: +7 812 7037500 • Fax: +7 812 7037501E-mail: mail@argus-spectr.ru • Website: www.argus-spectr.ruCertificate No: 928n-(cl-3) to EN 54-18: 2005, EN 54-17: 2005 and EN 54-25: 2008Certificate No: 928r-(cl-3) to EN 54-18: 2005 and EN 54-25: 2008Certificated ProductsLPCB Ref.No.VW2W100 Wire to wireless translator module 928n/01SGCWE100 Wireless conventional system Expander module 928r/01SGWE100 Wireless Expander module 928r/0118 Jan 2014 357

PART 1: SECTION 6LINE UNITSATEIS Middle East FZCOLIU 11 Dubai Silicon Oasis, Post Box 293640, Dubai, United Arab EmiratesTel: +971 4 3262730 • Fax: +971 4 3262731E-mail: info@ateis.ae • Website: www.ateis.aeCertificate No: 928n-(cl-4) to EN 54-18: 2005, EN 54-17: 2005 and EN 54-25: 2008Certificate No: 928r-(cl-4) to EN 54-18: 2005 and EN 54-25: 2008Certificated ProductsLPCB Ref.No.VELOX WLTM100 Wire to wireless translator module 928n/01VELOX WLCEM100 Wireless conventional system Expander module 928r/01VELOX WLEM100 Wireless Expander module 928r/02Certificate No: 1154j to EN 54-17: 2005 and EN 54-18: 2005Certificated ProductsLPCB Ref.No.VELOX 40100 Addressable Single Supervised Input Module 1154j/01VELOX 40010 Addressable Single Supervised Output Module 1154j/02VELOX 40002 Addressable Dual Form C Relay Output Module 1154j/03VELOX 40110 Addressable Single Supervised Input & Output Module 1154j/04VELOX 40102 Addressable Supervised Input & Relay Output Module 1154j/05Autronica Fire & Security ASPostboks 5620 NO-7483, Trondheim, NorwayTel: +47 73582500 • Fax: +47 73582501E-mail: info@autronicafire.no • Website: www.autronicafire.noCertificate No: 378g-(cl-1) to EN 54-17: 2005Certificated ProductsLPCB Ref.No.116-BBL-100 Addressable indoor beacon with isolator 378g/01Notes:1) the beacon functionality is not included within the scope of this approval116-BBL-100/IP Addressable outdoor beacon with isolator 378g/02Notes:1) the beacon functionality is not included within the scope of this approvalChubb Fire & Security LtdLittleton Road, Ashford, Middlesex TW15 1TZ, United KingdomTel: 01784424100E-mail: sales@chubb.co.uk • Website: www.chubb.co.ukCertificate No: 010ah-(cl-3) to EN 54-18: 2005 and EN54 -17: 2005Certificated ProductsLPCB Ref.No.F850429N XP95 analogue addressable switch monitor plus with isolator 010ah/03F850376N XP95 analogue addressable switch monitor with isolator 010ah/04F3170135N XP95 analogue addressable zone monitor unit with isolator 010ah/05F850352N XP95 analogue addressable input/output unit with isolator 010ah/06F850377N XP95 analogue addressable output unit with isolator 010ah/07F3170138N XP95 analogue addressable sounder controller with isolator 010ah/08358 18 Jan 2014

PART 1: SECTION 6LINE UNITSContext Plus LtdExport House, 175 Mauldeth Road, Fallowfield, Manchester M14 6SG, United KingdomTel: +44 (0)161 257 2541 • Fax: +44 (0)161 225 8817E-mail: xportsales@xportsales.com • Website: www.xportsales.comCertificate No: 010ap-(cl-2) to EN 54-17: 2005Certificate No: 010ah to EN 54-18: 2005 and EN 54-17: 2005Certificated ProductsLPCB Ref.No.45681-505IMC Negative switching isolating base 010ap/0155000-843IMC Analogue addressable switch monitor with isolator 010ah/0455000-845IMC Analogue addressable zone monitor with isolator 010ah/0555000-847IMC Analogue addressable input/output unit with isolator 010ah/0655000-852IMC Analogue addressable sounder control unit with isolator 010ah/08Control Equipment LimitedHillcrest Business Park, Dudley, West Midlands DY2 9AP, United KingdomTel: +44 (0)1384 458651 • Fax: +44 (0)1384 458972E-mail: celsales@controlequipment.co.uk • Website: www.controlequipment.comCertificate No: 681v-(cl-2) to EN 54-17: 2005, EN 54-18: 2005Certificate No: 681aa-(cl-2) to EN 54-17: 2005Certificated ProductsLPCB Ref.No.FC410QMO Quad monitored output module with short circuit isolator 681v/02FC410QIO Quad input/output module with short circuit isolator 681v/03FC410QRM Quad relay module with short circuit isolator 681v/044B-I Short circuit isolator base 681aa/01Detector Electronics Corporation6901 West 110th Street, Minneapolis, Minesota 55438, USATel: +001 952 946 6488E-mail: detronics@detronics.com • Website: www.det-tronics.comCertificate No: 973b to EN 54-17: 2005 and EN 54-18: 2005Certificated ProductsLPCB Ref.No.EQ3730ab(EDIO) Enhanced Discrete Input/Output Module with short circuit isolator 973b/01Note 1: a refers to either D-DIN rail or P-panel mountingNote 2:b refers to either W- non-SIL version or T- SIL versionThe 750XCH-24D Magnecraft relay is an ancillary module used in conjunctionwith the EDIO moduleNote 3: The isolation is applied on the LON communication transmission path and notthe power transmission path. Refer to the manufacturers installation document95-8642 with respect to the number of devices to be connected in a group orzone.Note 4: The EQ3730ab(EDIO) is approved for use in an EQ5410 cabinet.EQ3720ab(RM) Eight channel Relay Module with short circuit isolator 973b/02Note 1: a refers to either D-DIN rail or P-panel mountingb refers to W- non-SIL version onlyNote 2: The isolation is applied on the LON communication transmission path and notthe power transmission path. Refer to the manufacturers installation document95-8642 with respect to the number of devices to be connected in a group or18 Jan 2014 359

PART 1: SECTION 6LINE UNITSCertificated ProductsLPCB Ref.No.zone.Note 3: The EQ3720ab(RM) is approved for use in an EQ5410 cabinet.EQ3710ab(AIM) Analogue Input Module with short circuit isolator 973b/03Note 1: a refers to either D-DIN rail or P-panel mountingb refers to W- non-SIL version onlyNote 2: The isolation is applied on the LON communication transmission path and notthe power transmission path. Refer to the manufacturers installation document95-8642 with respect to the number of devices to be connected in a group orzone.Note 3: The EQ3710ab(AIM) is approved for use in an EQ5410 cabinet.EQ25EM(SAM) Signal Audible Module with short circuit isolator 973b/04Note 1: The 750XCH-24D Magnecraft relay is an ancillary module used in conjunctionwith the SAM module.Note 2: The isolation is applied on the LON communication transmission path and notthe power transmission path. Refer to the manufacturers installation document95-8642 with respect to the number of devices to be connected in a group orzone.Note 3: The EQ25EM(SAM) is approved for use in an EQ5410 cabinet.EQ22EM(IDCSC) Initiating Device circuit with short circuit isolator 973b/05Note 1: The isolation is applied on the LON communication transmission path and notthe power transmission path. Refer to the manufacturers installation document95-8642 with respect to the number of devices to be connected in a group orzone.Note 2: The EQ22EM(IDCSC) is approved for use in an EQ5410 cabinet.Emirates Fire Protections Equip. Factory. TR. SectionBehind the Fourth Industrial Estate, Industrial Area 3, UAE PO 22436, Sharjah, United Arab EmiratesTel: 00971 653 40300 • Fax: 00971 653 40090E-mail: QC@firexuae.com • Website: www.firexuae.comCertificate No: 548m-(cl-3) to EN54-18: 2005Certificate No: 548n-(cl-3) to EN54-17: 2005Certificated ProductsLPCB Ref.No.FX9300I Analogue addressable input module 548m/01FX9301I Analogue addressable single input/output module 548m/01FX9503 Loop isolator 548n/01Fike Safety Technology LtdUnit 31, Springvale Industrial Estate, Cwmbran, Gwent NP44 5BD, United KingdomTel: +44 (0)1633 865558 • Fax: +44 (0)1633 866656E-mail: fstinfo@fike.com • Website: www.fikesafetytechnology.co.ukCertificate No: 331m to EN 54-17: 2005 & EN 54-18: 2005Certificated ProductsLPCB Ref.No.803-0006 Sita Input/Output Module 331m/01360 18 Jan 2014

PART 1: SECTION 6LINE UNITSFinder Elektronik A.S.Liman Mah., 6. Sok., No: 10 07070, Konyaalti, Antalya, TurkeyTel: +9 0242 344 2500 • Fax: +9 0242 344 2120E-mail: finder@finder.com.tr • Website: www.finder.com.trCertificate No: 928n-(cl-5) to EN 54-18: 2005, EN 54-17: 2005 and EN 54-25: 2008Certificated ProductsLPCB Ref.No.FF VW2W100 Wire to wireless translator module 928n/01Gent By Honeywell (Novar Systems Ltd)140 Waterside Road, Hamilton Industrial Park, Leicester LE5 1TN, United KingdomTel: +44 (0)116 246 2000 • Fax: +44 (0)116 246 2300E-mail: gent_enquiry@gent.co.uk • Website: www.gent.co.ukCertificate No: 042ba to EN 54-17: 2005 & EN 54-18: 2005Certificate No: 042bp to EN 54-18: 2005, EN 54-17: 2005 and EN 54-4: 1997 + A1: 2002 + A2: 2006Certificated ProductsLPCB Ref.No.S4-34410 Analogue addressable 1 input interface module with short circuit isolator, low voltage. 042ba/01(S4-34490 and S4-34492 boxes)S4-34411 Analogue addressable 1 output DIN rail mounting interface module with short circuit 042ba/02isolator, medium voltage.S4-34415 Analogue addressable 1 output surface mounting interface module with short circuit 042ba/03isolator, medium voltage.S4-34420 Analogue addressable 1 input and 1 output interface module with short circuit isolator, 042ba/04low voltage. (S4-34490 and S4-34492 boxes)S4-34450 Analogue addressable 4 input / output interface module with short circuit isolator, low 042ba/05voltage. (S4-34490 and S4-34492 boxes)S4-34440-02 Mains powered Interface Unit (2Ah) 042bp/01S4-34440-12 Mains powered Interface Unit (12Ah) 042bp/02Accessories:S4-34490 Plastic BoxS4-34492 Metal BoxGEZE GmbHReinhold-Vöster-Str. 21-29, D-71229 Leonberg, GermanyTel: +49 (0)7152-203-0 • Fax: +49 (0)7152-203-310E-mail: sales@geze.com • Website: www.geze.comCertificate No: 928s-(cl-1) to EN 54-18: 2005Certificated ProductsLPCB Ref.No.GC150B Non-latching relay base 928s/0118 Jan 2014 361

PART 1: SECTION 6LINE UNITSGulf Security Technology Co., Ltd.No 80 Changjiang East Road, QETDZ, Qinhuangdao, Hebei Province 066004, ChinaTel: +86 0335 8502434 • Fax: +86 0335 8502532E-mail: sales@fs.utc.com • Website: www.gst.com.cnCertificate No: 548n to EN 54-17: 2005Certificate No: 548m to EN 54-18: 2005Certificated ProductsLPCB Ref.No.C-9503 Loop isolator 548n/01I-9300 Analogue addressable input module 548m/01I-9301 Analogue addressable single input/output module 548m/02Note:1. 4 Wire Mode, 24v active output (Default).2. 2 Wire Mode, volt free changeover contact output.I-9319 Addressable Zone Monitor Unit 548m/03C-9504 Base mount short circuit isolator 548n/02HDRGrosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, United KingdomTel: +44 (0)1634 260133 • Fax: +44 (0)1634 260132E-mail: info@hochikieurope.com • Website: www.hochikieurope.comCertificate No: 164b to EFSG/F/95/007Certificate No: 164q to EN 54-17: 2005 & EN 54-18: 2005Certificate No: 164n to EN 54-17: 2005Certificate No: 164p to EN 54-18: 2005Certificated ProductsLPCB Ref.No.1433100 Dual Zone Monitor 164b/051433620 Intelligent analogue addressable single zone monitor with short circuit isolator 164q/011433560 Intelligent analogue addressable dual input module with short circuit isolator 164q/031433540 Intelligent analogue addressable dual sounder controller with short circuit isolator 164q/051433600 Intelligent analogue addressable dual relay controller with short circuit isolator 164q/071226110 Short Circuit Isolating Base 164n/031433380 Intelligent Analogue addressable powered output module 164p/101433640 Intelligent Analogue addressable single input module 164p/111433690 Analogue Addressable 4 Input, 4 output Plant Control Module with164q/13short circuit isolatorNote: The device must be in an enclosure as defined in the manufacture installationmanual.1433720 Intelligent analogue addressable single output module 164p/121433800 Intelligent Analogue Addressable Mains Relay Controller with Short Circuit Isolator 164q/161270090 Intelligent analogue addressable dual IS sounder module 164p/13Note: 1. This sounder interface module should always be used with an I.S Barrier. The1270090 is not itself intrinsically safe362 18 Jan 2014

PART 1: SECTION 6LINE UNITSHochiki Europe (UK) LimitedGrosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, United KingdomTel: +44 (0)1634 260133 • Fax: +44 (0)1634 260132Website: www.hochikieurope.comCertificate No: 164b to EFSG/F/95/007Certificate No: 164p to EN-54-18: 2005Certificate No: 164q to EN 54-17: 2005 & EN 54-18: 2005Certificate No: 164n to EN 54-17: 2005Certificate No: 928r-(cl-6) to EN 54-18: 2005 and EN 54-25: 2008Certificate No: 928t-(cl-1) to EN 54-18: 2005, EN 54-25: 2008Certificated ProductsLPCB Ref.No.CHQ-Z Dual zone monitor 164b/05CHQ-SZM/OEM(SCI) Intelligent Analogue Addressable Single Zone monitor with Short Circuit Isolator 164q/01CHQ-SZM/DIN(SCI) Intelligent Analogue Addressable Single Zone monitor with Short Circuit Isolator (DIN rail 164q/02version)CHQ-DIM/OEM(SCI) Intelligent Analogue Addressable Dual Input Module with Short Circuit Isolator 164q/03CHQ-DIM/DIN(SCI) Intelligent Analogue Addressable Dual Input Module with Short Circuit Isolator (DIN rail 164q/04version)CHQ-DSC/OEM(SCI) Intelligent Analogue Addressable Dual Sounder Controller with Short Circuit Isolator 164q/05CHQ-DSC/DIN(SCI) Intelligent Analogue Addressable Dual Sounder Controller with Short Circuit Isolator (DIN 164q/06rail version)CHQ-DRC/OEM(SCI) Intelligent Analogue Addressable Dual Relay Controller with Short Circuit Isolator 164q/07CHQ-DRC/DIN(SCI) Intelligent Analogue Addressable Dual Relay Controller with Short Circuit Isolator (DIN 164q/08rail version)CHQ-SZM/OEM(HFP)-SCI Intelligent analogue addressable single zone monitor with short circuit isolator 164q/01CHQ-DIM/OEM(HFP)-SCI Intelligent analogue addressable dual input module with short circuit isolator 164q/03CHQ-DSC/OEM(HFP)-SCI Intelligent analogue addressable dual sounder controller with short circuit isolator 164q/05CHQ-DRC/OEM(HFP)-SCI Intelligent analogue addressable dual relay controller with short circuit isolator 164q/07YBO-R/SCI(HFP) Short Circuit Isolating Base 164n/03YBO-R/SCI(RED) Short Circuit Isolating Base (RED) 164n/02YBO-R/SCI(WHT) Short Circuit Isolating Base (WHITE) 164n/03YBO-R/SCI Short Circuit Isolating Base 164n/01YBO-R/6R Conventional latching relay base 164p/07YBO-R/6R(WHT) Conventional latching relay base - White 164p/07YBO-R/6RS Conventional latching relay base with integral Schottky diode 164p/08YBO-R/6RS(WHT) Conventional latching relay base with integral Schottky diode - White 164p/08YBO-R/6RN Conventional non-latching relay base 164p/09YBO-R/6RN(WHT) Conventional non-latching relay base - White 164p/09CHQ-POM Intelligent Analogue addressable powered output module 164p/10CHQ-SIM Intelligent Analogue addressable single input module 164p/11CHQ-POM(HFP) Intelligent Analogue addressable powered output module 164p/10CHQ-SIM(HFP) Intelligent Analogue addressable single input module 164p/11CHQ-SZM/M(SCI) Intelligent analogue addressable single zone monitor with short circuit isolator 164q/01CHQ-DIM/M(SCI) Intelligent analogue addressable dual input module with short circuit isolator 164q/03CHQ-DSC/M(SCI) Intelligent analogue addressable dual sounder controller with short circuit isolator 164q/05CHQ-DRC/M(SCI) Intelligent analogue addressable dual relay controller with short circuit isolator 164q/07YBO-R/SCIM Short Circuit Isolating Base 164n/01CHQ-DZM(SCI) Intelligent Analogue Addressable Dual Zone Monitor with short circuit Isolator 164q/09CHQ-DZM/DIN(SCI) Intelligent Analogue Addressable Dual Zone Monitor with short circuit Isolator (DIN rail 164q/10version)CHQ-DZM(SCI)-ISIntelligent Analogue Addressable Intrinsically Safe Dual Zone Monitor164q/11with short circuit IsolatorCHQ-DZM/DIN(SCI)-IS Intelligent Analogue Addressable Intrinsically Safe Dual Zone Monitor with short circuit 164q/12Isolator (DIN rail version)CHQ-PCM/DIN(SCI) Analogue Addressable 4 Input, 4 output Plant Control Module with164q/14short circuit isolatorNote: The device must be in an enclosure as defined in the manufacture installationmanual.CHQ-PCM(SCI)Analogue Addressable 4 Input, 4 output Plant Control Module with164q/13short circuit isolatorNote: The device must be in an enclosure as defined in the manufacture installationmanual.CHQ-PCM(HFP)-SCI Analogue Addressable 4 Input, 4 output Device with short circuit isolator 164q/13Note: The device must be in an enclosure as defined in the manufacture installationmanual.RSM-EXP Wireless Expander module 928r/0218 Jan 2014 363

PART 1: SECTION 6LINE UNITSCertificated ProductsLPCB Ref.No.YBN-R/3(HFP)-SCI Short Circuit Isolating Base 164n/05YBN-R/3(SCI) Short Circuit Isolating Base 164n/04YBN-R/3(WHT)-SCI Short Circuit Isolating Base (white) 164n/05RSM-WTM ESP Wire to Wireless translator module 928t/01CHQ-SOM Intelligent analogue addressable single output module 164p/12CHQ-SOM(HFP) Intelligent analogue addressable single output module 164p/12CHQ-MRC2/DIN(SCI) Intelligent Analogue Addressable Mains Relay Controller with Short Circuit Isolator 164q/15Note: The device must be in an enclosure as defined in the manufacturers installationmanual.CHQ-MRC2(SCI) Intelligent Analogue Addressable Mains Relay Controller with Short Circuit Isolator 164q/16CHQ-MRC2(HFP)-SCI Intelligent Analogue Addressable Mains Relay Controller with Short Circuit Isolator 164q/16CHQ-ISM Intelligent analogue addressable dual IS sounder module 164p/13Note: 1. This sounder interface module should always be used with an I.S Barrier. TheCHQ-ISM is not itself intrinsically safeCHQ-ISM/DIN Intelligent analogue addressable dual IS sounder module (DIN) 164p/14Notes:1. This sounder interface module should always be used with an I.S Barrier. The CHQ-ISM/DIN is not itself intrinsically safe2. Device to be installed within a SMB-3 or SMB-2 enclosureHoneywell Control Systems LimitedHoneywell House, Arlington Business Park, Bracknell, Berkshire RG12 1EB, United KingdomTel: +44 (0)1344 655609 • Fax: +44 (0)1344 655474Website: www.honeywell.comCertificate No: 199v to EN 54-17: 2005 & EN 54-18: 2005Certificated ProductsLPCB Ref.No.TC841E1019EIS Conventional zone monitor module with resistive end of line 199v/08TC809E1043Analogue addressable single channel input module with short199v/01short circuit isolatorTC809E1050 Analogue addressable dual channel input module with short circuit isolator 199v/02TC809E1068Analogue addressable dual channel input and single channel output module with short 199v/03circuit isolatorTC810E1032 Single channel output module with short circuit isolator 199v/04TC810E1040 Single channel 240V output module with short circuit isolator 199v/05TC810E1057 Single channel 240V output module, DIN rail mount with short circuit isolator 199v/06TC841E1019 Single channel 240V output module, DIN rail mount with short circuit isolator 199v/07Honeywell Control Systems LtdHoneywell House, Arlington Business Park, Bracknell, Berkshire RG12 1EB, United KingdomTel: 01344 655609 • Fax: 01344 655474Website: www.honeywell.comCertificate No: 262x-(cl-2) to EN 54-17: 2005Certificated ProductsLPCB Ref.No.XLS-IM Isolator Module (SIGA-MP1, SIGA-MP2 and SIGA-MP2L) 262x/01Ancillaries:SIGI-MP1SIGA-MP2SIGA-MP2LMounting PlateMounting PlateMounting Plate364 18 Jan 2014

PART 1: SECTION 6LINE UNITSINIM Electronics s.r.l.Via Fosso Antico - Loc, Centobuchi, 63033 Monteprandone (AP), ItalyTel: +39 0735 705007 • Fax: +39 0735 704912E-mail: enea.galiffa@inim.biz • Website: www.inim.bizCertificate No: 991g to EN 54-17: 2005 and EN 54-18: 2005Certificated ProductsLPCB Ref.No.EM312SR Intelligent analogue addressable Mini input/output module with short circuit isolator 991g/01EU311 Intelligent analogue addressable Micro input/output module with short circuit isolator 991g/02EM344SIntelligent analogue addressable 4 input / 4 supervised output module with short circuit 991g/03isolatorEM344R Intelligent analogue addressable 4 input / 4 relay output module with short circuit isolator 991g/04EM340 Intelligent analogue addressable 4 input module with short circuit isolator 991g/05EM304S Intelligent analogue addressable output module with short circuit isolator 991g/06EM304R Intelligent analogue addressable 4 relay output module with short circuit isolator 991g/07Kidde Products LtdThame Park Road, Thame, Oxfordshire OX9 3RT, United KingdomTel: +44 (0)1844 265003 • Fax: +44 (0)1844 265156E-mail: general.enquiries@kiddeuk.co.uk • Website: www.kfp.co.ukCertificate No: 010ah-(cl-4) to EN 54-18: 2005 and EN 54 -17: 2005Certificated ProductsLPCB Ref.No.23900-K135 XP95 analogue addressable switch monitor plus with isolator 010ah/0323900-K134 XP95 analogue addressable switch monitor with isolator 010ah/0423900-K136 XP95 analogue addressable zone monitor unit with isolator 010ah/0523900-K132 XP95 analogue addressable input/output unit with isolator 010ah/0623900-K133 XP95 analogue addressable output unit with isolator 010ah/0723900-K137 XP95 analogue addressable sounder controller with isolator 010ah/08Morley-IAS Fire Systems by Honeywell (Pittway Systems Technology Group (Europe)Ltd)Charles Avenue, Burgess Hill, West Sussex RH15 9UF, United KingdomTel: +44 (0)1444 230300 • Fax: +44 (0)1444 230888E-mail: sales@morleyias.co.uk • Website: www.morley-ias.co.ukCertificate No: 199v to EN 54-17: 2005 & EN 54-18: 2005Certificate No: 199r to CEA GEI 1-052 Draft 2.0: 11.06.97 & prEN 54-17 Draft: July 2002Certificated ProductsLPCB Ref.No.MI-DMMI Analogue addressable single channel input module with short circuit isolator 199v/01MI-DMM2I Analogue addressable dual channel input module with short circuit isolator 199v/02MI-D2ICMOAnalogue addressable dual channel input and single channel output module with short 199v/03circuit isolatorMI-DCMO Single channel output module with short circuit isolator 199v/04MI-D240CMO Single channel 240V output module with short circuit isolator 199v/05MI-240CMO-DIN Single channel 240V output module, DIN rail mount with short circuit isolator 199v/06MI-DCZM Conventional zone interface module 199v/07MI-DISO Short circuit isolator module 199r/01MI-DCZRM Conventional zone monitor module with resistive end of line 199v/0818 Jan 2014 365

PART 1: SECTION 6LINE UNITSMultron Systems Pte Ltd217 Kallang Bahru, Multron Building, Singapore 339 347, SingaporeTel: +65 6743 2555 / 6395 6868 • Fax: +65 6743 2777 / 6395 6869E-mail: info@multron.com • Website: www.multron.comCertificate No: 548m-(cl-5) to EN54-18: 2005Certificate No: 548n-(cl-5) to EN54-17: 2005Certificated ProductsLPCB Ref.No.MOD-A300 Analogue addressable input module 548m/01MOD-A301 Analogue addressable single input/output module 548m/02MOD-A503 Loop isolator 548n/01Nitin Ventures FZEP.O. Box 262294, Jebel Ali Free Zone, Dubai, United Arab EmiratesTel: +97 148865858/859 • Fax: +97 148865800E-mail: sales@nitinventures.com • Website: www.nitinfire.comCertificate No: 010aa-(cl-1) to EN 54-17: 2005Certificate No: 010ah-(cl-2) to EN 54-18: 2005 and EN 54-17: 2005Certificated ProductsLPCB Ref.No.NV-IA-IB Short circuit isolating base 010aa/01NV-IAI-DIB Enhanced deep isolating base (Red) 010aa/08NV-IAI-MSM XP95/Discovery analogue addressable mini switch monitor with isolator 010ah/09NV-IA-ISO XP95 20D Negative Short Circuit Isolator (NV-IA-ISOB) 010aa/05NV-IAII-SM XP95 analogue addressable switch monitor with isolator 010ah/04NV-IAII-ZM XP95 analogue addressable zone monitor unit with isolator 010ah/05NV-IAII-IO XP95 analogue addressable input/output unit with isolator 010ah/06NV-IAII-O XP95 analogue addressable output unit with isolator 010ah/07NV-IAII-SC XP95 analogue addressable sounder controller with isolator 010ah/08NV-IA-ISOB XP95 Isolator BaseNotifier by Honeywell (Pittway Systems Technology Group (Europe) Ltd)Charles Avenue, Burgess Hill, West Sussex RH15 9UF, United KingdomTel: +44 (0)1444 230300 • Fax: +44 (0)1444 230888E-mail: sales@notifiersystems.co.uk • Website: www.notifierfiresystems.co.ukCertificate No: 199r to CEA GEI 1-052 Draft 2.0: 11.06.97 & prEN 54-17 Draft: July 2002Certificate No: 199v to EN 54-17: 2005 & EN 54-18: 2005Certificated ProductsLPCB Ref.No.M700X Short circuit isolator module 199r/01M710 Analogue addressable single channel input module with short circuit isolator 199v/01M720 Analogue addressable dual channel input module with short circuit isolator 199v/02M721Analogue addressable dual channel input and single channel output module with short 199v/03circuit isolatorM701 Single channel output module with short circuit isolator 199v/04M701-240 Single channel 240V output module with short circuit isolator 199v/05M701-240-DIN Single channel 240V output module, DIN rail mount with short circuit isolator 199v/06M710-CZR Conventional zone monitor module with resistive end of line 199v/08366 18 Jan 2014

PART 1: SECTION 6LINE UNITSPanasonic Corporation1668, Fujikata, Tsu-shi, Mie-ken, JapanTel: +46 40 697 70 00 • Fax: +46 40 697 70 99E-mail: info.pesn@eu.panasonic.com • Website: http://pesn.panasonic.seCertificate No: 1012c-(cl-1) to EN 54-18: 2005Certificated ProductsLPCB Ref.No.Type 2842 Intrinsically safe analogue addressable interface barrier unit 1012c/01Pelco Finland OySokerilinnantie 11C, 02600, Espoo, FinlandTel: +358 10 446 511 • Fax: +358 10 446 5103E-mail: info.fi@pelco.com • Website: www.pelco.com/nordicCertificate No: 199x to EN 54-17: 2005Certificate No: 199v to EN 54-17: 2005 and EN 54-18: 2005Certificate No: 010ag-(cl-1) to EN 54-18: 2005Certificate No: 10aa-(cl-2) to EN 54-17: 2005Certificate No: 010ah-(cl-1) to EN 54-18: 2005 and EN 54-17: 2005Certificated ProductsLPCB Ref.No.EMISO524 Short circuit isolator 199x/02EM210ECZ Conventional zone interface module 199v/07EM210E-CZR Conventional zone monitor module with resistive end of line 199v/08EMI-401/S Intellia DIN-rail sounder control module 010ag/08EMI-411 Intellia DIN-rail single input - single output module 010ag/10Note: to ensure compliance is maintained, this device shall be installed withinan enclosure weighing greater than 4.75kg.EMI-401 Intellia DIN-rail single output module 010ag/11Note: to ensure compliance is maintained, this device shall be installed withinan enclosure weighing greater than 4.75kg.EMI-410+ Intellia DIN-rail single input+ module 010ag/12EMI-410 Intellia DIN-rail single input module 010ag/13EMI-311/240 Intellia single input - mains switching module 010ag/16EBI-11 Intellia isolating base 010aa/01EMI-400 Intellia DIN-rail dual isolator 010aa/0606728115 Enhanced deep isolating base (white) 010aa/0706728116 Enhanced deep isolating base (red) 010aa/08EMI-333 Intellia three channel input / output unit with isolator 010ah/01EMI-410/CZ Intellia DIN-rail conventional zone module with isolator 010ah/02EMI-310+ Intellia single input+ module with isolator 010ah/03EMI-310 Intellia single input module with isolator 010ah/04EMI-310/CZ Intellia conventional zone monitor module with isolator 010ah/05EMI-311 Intellia single input - single output module with isolator 010ah/06EMI-301 Intellia single output module with isolator 010ah/07EMI-301/S Intellia sounder control module with isolator 010ah/0818 Jan 2014 367

PART 1: SECTION 6LINE UNITSPittway Tecnologica Srl.Via Caboto 19/3, 34147 Trieste, ItalyTel: +39 040 94 90111 • Fax: +39 040 38 2137E-mail: sandro_bonin@systemsensor.com • Website: www.systemsensoreurope.comEuropean Sales:System Sensor Europe, Life Safety Distribution AG, Wilstrasse 11 (Building U31), CH-8610 Uster, SwitzerlandTel: +41 44 943 4424 • Fax: +41 44 943 4399E-mail: sse.marketing@systemsensor.com • Website: www.systemsensor.comCertificate No: 199r to CEA GEI 1-052 Draft 2.0 (11-06-97) and prEN 54-17 Draft (July 2002)Certificate No: 199x to EN 54-17: 2005Certificate No: 199v to EN 54-17: 2005 & EN 54-18: 2005Certificated ProductsLPCB Ref.No.M200XE Short circuit isolator module 199r/01B524IEFT-1 Short circuit isolator base 199x/01ISO524-1 Short circuit isolator module 199x/02M210E Analogue Addressable single channel input module with short circuit isolator 199v/01M220E Analogue addressable dual channel input module with short circuit isolator 199v/02M221EAnalogue addressable dual channel input and single channel output module with short 199v/03circuit isolatorM201E Single channel output module with short circuit isolator 199v/04M201E-240 Single channel 240V output module with short circuit isolator 199v/05M201E-240-DIN Single channel 240V output module, DIN rail mount with short circuit isolator 199v/06M210E-CZ Conventional zone interface module 199v/07M210E-CZR Conventional zone monitor module with resistive end of line 199v/08Will be labelled as M210E-CZR-yy, where yy indicates the protocol identifier option valuebetween 00 and 99.Protec Fire Detection plcProtec House, Churchill Way, Nelson, Lancashire BB9 6RT, United KingdomTel: +44 (0)1282 717171 • Fax: +44 (0)1282 717273E-mail: sales@protec.co.uk • Website: www.protec.co.ukCertificate No: 201t to EN 54-17: 2005 and EN 54-18: 2005Certificated ProductsLPCB Ref.No.6000/CCO Clean Contact Output Interface Module 201t/016000/MIP Monitored Input Interface Module 201t/036000/MICCO Monitored Input Clean Contact Output Unit 201t/026000/DIU/24V Damper Interface Unit - 24V 201t/046000/DIU/240V Damper Interface Unit - 240V 201t/05Safety Hi-Tech SrlVia Cavour, 96 - 67051 Avezzano (AQ), ItalyTel: +39 0863 1940720 • Fax: +39 0863 1940724E-mail: mail@safetyhitech.com • Website: www.safetyhitech.comCertificate No: 010ag-(cl-3) to EN54-18: 2005368 18 Jan 2014

PART 1: SECTION 6LINE UNITSCertificated ProductsLPCB Ref.No.SHB90002 Venator-DE Standard Relay Base 010ag/02SHIELD FIRE, SAFETY AND SECURITY LTDRedburn House, 2a Tonbridge Road, Romford, Essex RM3 8QE, United KingdomTel: +44 207 712 1610 • Fax: +44 207 712 1578E-mail: shielduk@shieldglobal.com • Website: www.shieldglobal.comCertificate No: 548m-(cl-4) to EN54-18: 2005Certificate No: 548n-(cl-4) to EN54-17: 2005Certificated ProductsLPCB Ref.No.AI-500 Analogue addressable input module 548m/01AI-510 Analogue addressable single input/output module 548m/02AI-520 Loop isolator 548n/01Siemens Switzerland Limited, Building Technologies DivisionInternational Headquarters, Gubelstrasse 22, CH-6301 Zug, SwitzerlandTel: +41 (0) 41 724 24 24 • Fax: +41 (0) 41 724 35 22Manufacturing at:Siemens Building Technologies AG, Volketswil Factory, Industriestrasse 22, CH-8604 Volketswil, SwitzerlandTel: +41 1 922 6111 • Fax: +41 1 922 6450UK Sales:Tel: +44 (0)1189 783703 • Fax: +44 (0)1189 775750Website: www.sibt.com/www.uk.cerberus.comCertificate No: 126m-(cl-1) to EN 54-17: 2005 and EN 54-18: 2005Certificate No: 531m-(cl-1) to EN54-17: 2005 & EN54-18:2005Certificate No: 531n-(cl-1) to EN 54-17:2005Certificated ProductsLPCB Ref.No.DC1192 Input/output module with short circuit isolator 126m/04FDCI222 addressable input module with short circuit isolator 531m/01Notes:1. Approved when used with FDCH221 housing2. Approved with FDCM291 mounting foot and TS35 standard top hat railFDCIO222 Analogue addressable input/output module with short circuit isolator 531m/02Notes:1. Approved when used with FDCH221 housing2. Approved with FDCM291 mounting foot and TS35 standard top hat railFDCIO223 Addressable input/output module (transponder) with short circuit isolator 531m/03Notes:1. Approved when used in conjunction with housing FDCH2212. Approved with FDCM291 mounting foot and TS35 standard top hat railFDCL221 Analogue addressable line separator 531n/01Note:1. Approved with TS35 standard top hat railFDCL221-M Multi line separator 531n/02Notes:1. Approved when used with FDCH221 housing2. Approved with FDCM291 mounting foot and TS35 standard top hat rail18 Jan 2014 369

PART 1: SECTION 6LINE UNITSCertificate No: 126ae-(cl-1) to EN 54-17: 2005Certificated ProductsLPCB Ref.No.FDCL221 Analogue addressable line separator with short circuit isolator 126ae/01Accessories:TS35 standard top hat railCertificate No: 126ad-(cl-1) to EN 54-17: 2005 and EN 54-18: 2005Certificated ProductsLPCB Ref.No.FDCI222 Analogue addressable input module with short circuit isolator 126ad/01Note:1. Approved when used with FDCH291 or FDCH292 enclosure or in a CIE enclosurecompliant with EN 54-2FDCIO222 Analogue addressable input/output module with short circuit isolator 126ad/02Note:1. Approved when used with FDCH291 or FDCH292 enclosure or in a CIE enclosurecompliant with EN 54-2Accessories:FDCM291 mounting footTS35 standard top hat railFDCH291 enclosureFDCH292 sealed enclosureCertificate No: 126aq-(cl-1) to EN 54-17:2005 and EN 54-18:2005Certificated ProductsLPCB Ref.No.FDCIO223Addressable transponder incorporating short circuit isolators126aq/01(FDCH292, FDCM291)Note:1. Approved when used in conjunction with housing box FDCH292FT2001-A1Digital addressable mimic display driver126aq/02(F50F410, 520379)Note:1. Approved when used with a metal enclosure at least complying with protection classIP30 and weighing at least 4.5kgFT2010-A1 Floor repeater terminal 126aq/03FT2011-A1 Floor repeater display 126aq/04Accessories:FDCH292 Housing boxFDCM291 Mounting footF50F410 LED flat cable520379 AC/AC TransformerCertificate No: 531h-(cl-1) to EN 54-17: 2005 and EN 54-18: 2005Certificated ProductsLPCB Ref.No.FDCI221 Analogue addressable input module 531h/01Notes:1. Approved when used with the FDCH221FDCIO221 Analogue addressable input module 531h/02Notes:1. Approved when used with the FDCH221AccessoriesFDCH221 EnclosureCertificate No: 126au-(cl-1) to EN 54-17: 2005370 18 Jan 2014

PART 1: SECTION 6LINE UNITSCertificated ProductsLPCB Ref.No.FDCL221-M Multi line short circuit isolator module 126au/01SMS (Novar Systems Ltd)Hamilton Industrial Park, 140 Waterside Road, Leicester LE5 1TN, United KingdomTel: +44 (0)116 246 2100 • Fax: +44 (0)116 246 2016Website: www.smsfire.co.ukCertificate No: 042ba to EN54-18: 2005, EN54-17: 2005Certificated ProductsSEN-INT-INPUTSEN-INT-ACDINSEN-INT-ACSEN-INT-OUTPUTSEN-INT-4I0Analogue addressable 1 input interface module with short circuit isolator low voltage(SEN-490 and SEN-492 boxes).Analogue addressable 1 output DIN rail mounting interface module with short circuitisolator, medium voltage.Analogue addressable 1 output surface mounting interface module withshort circuit isolator, medium voltage.Analogue addressable 1 input and 1 output interface module with short circuit isolator,low voltage (SEN-490 and SEN-492 boxes)Analogue addressable 4 input / output interface module with short circuitisolator, low voltage (SEN-490 and SEN-492 boxes)LPCB Ref.No.042ba/01042ba/02042ba/03042ba/04042ba/05Accessories:SEN-490 Plastic BoxSEN-492 Metal BoxSterling Safety SystemsUnit B12a, Holly Farm Business Park, Honiley, Warwickshire CV8 1NP, United KingdomTel: +44(0)1926485282 • Fax: +44(0)1926485090E-mail: info@sterlingsafety.co.uk • Website: www.sterlingsafety.co.ukCertificate No: 928n-(cl-6) to EN 54-18: 2005, EN 54-17: 2005 and EN 54-25: 2008Certificate No: 928r-(cl-5) to EN 54-18: 2005 and EN 54-25: 2008Certificated ProductsLPCB Ref.No.HFW-W2W-01 Wire to wireless translator module 928n/01HFW-CEM-02 Wireless conventional system Expander module 928r/01HFW-EM-01 Wireless Expander module 928r/01Thorn Security Limited, trading as Tyco Safety ProductsDunhams Lane, Letchworth SG6 1BD, United KingdomTel: +44 (0)1462 667700 • Fax: +44 (0)1462 667777E-mail: mashbury@tycoint.com • Website: www.tycosafetyproducts-europe.comCertificate No: 681k-(cl-1) to GEI 1-052: 11-06-97Certificate No: 681t-(cl-1) to EN 54-18: 2005Certificate No: 681u-(cl-1) to EN 54-18: 2005Certificate No: 681v-(cl-1) to EN 54-17: 2005 & EN 54-18: 2005Certificated ProductsLPCB Ref.No.5BI 5" Isolator base 681k/01801IB Digital addressable isolator base 681k/02801RB Digital addressable relay base 681k/03HVR800 High voltage relay module 681t/0118 Jan 2014 371

PART 1: SECTION 6LINE UNITSCertificated ProductsLPCB Ref.No.Notes:1. For use only with RIM800 relay interface moduleCIM800 Contact input module 681t/02DIM800 Detector input module 681t/03RIM800 Relay interface module 681t/04MIM800 Mini input module 681t/05SNM800 Sounder notification module 681t/06LAV800 Extinguishing input module 681t/07MIO800 Small addressable multi input/output module 681t/08BDM800 Loop powered beam detector interface module 681u/01Notes:1. Approved when used in conjunction with the FIRERAY2000/50R/100R beam detector and BTM800 thermal moduleDDM800 Detector driver module with short circuit isolator 681v/01Notes:1. Approved for use with enclosure modelsM520 and D8002. The unit is approved when powered from anEN 54-4 approved power sourceFC410QMO Quad monitored output module with short circuit isolator 681v/02FC410QIO Quad input/output module with short circuit isolator 681v/03FC410QRM Quad relay module with short circuit isolator 681v/04AccessoriesM520 Standard indoor enclosureD800 Outdoor weatherproof enclosureUTC Fire & Security BVKelvinstraat 7, NL-6003DH, Weert, The NetherlandsTel: + 31 495 58 30 00 • Fax: + 31 495 55 00 42E-mail: Daragh.O'Donnell@fs.utc.com • Website: www.utcfireandsecurity.comCertificate No: 092w-(cl-1) to EN 54-18:2005Certificate No: 092t-(cl-1) to EN 54-17:2005Certificate No: 092u-(cl-1) to EN 54-18:2005Certificated ProductsLPCB Ref.No.A51E-1 Analogue addressable high voltage relay module 092w/01EA51E-1 Analogue addressable high voltage relay module 092w/01A70E-2 Conventional line interface module 092w/02Notes:1) The switched alarm output is not approved.A60E-2 Analogue addressable line isolator module 092t/01EA60E-2 Analogue addressable line isolator module 092t/01ZP7-IB Analogue addressable isolator base 092t/02Note:1) Approved for use with the following detectors:ZP710-2, ZP720-3, ZP730-2 & ZP732-2.EA-IB1 Analogue addressable isolator base 092t/02Note:1) Approved for use with the following detectors:EA10E-2, EA20E-3, EA30E-2 & EA32E-2.ZP752-2 Analogue addressable dual monitored sounder unit 092w/03Note:1) The external power supply must be compliant with EN 54-4EA752-2 Analogue addressable dual monitored sounder unit 092w/03Note:1) The external power supply must be compliant with EN 54-4SOUNDI2000 Analogue addressable dual monitored sounder unit 092w/03Note:1) The external power supply must be compliant with EN 54-4A45E-2Analogue addressable single input interface module092u/01(Labelled Ziton)EA45E-2Analogue addressable single input interface module(Labelled EST)092u/01372 18 Jan 2014

Certificated ProductsA50E-2EA50E-2Analogue addressable line relay module(Labelled Ziton)Analogue addressable line relay module(Labelled EST)PART 1: SECTION 6LINE UNITSLPCB Ref.No.092u/02092u/02UTC Fire & Security Inc. Trading as Edwards Systems Technology8985 Town Center Parkway, Bradenton, Florida FL34202, USATel: 941 739-42228Website: www.fs.utc.comCertificate No: 262y-(cl-1) to EN 54-18: 2005Certificate No: 262x-(cl-1) to EN 54-17: 2005Certificate No: 902b-(cl-1) to EN 54-17: 2005Certificated ProductsLPCB Ref.No.SIGA-CC1 Single Input Signal Module 262y/01Note 1: approved with the following ancillaries - SIGA-MP1, SIGA-MP2 and SIGA-MP2LNote 2: approved with personality code 5SIGA-CC1S Auto-Sync Output Module 262y/02Note 1: approved with the following ancillaries - SIGA-MP1, SIGA-MP2 and SIGA-MP2LNote 2: approved with personality code 5SIGA-CC2 Dual Input Signal Module 262y/03Note 1: approved with the following ancillaries - SIGA-MP1, SIGA-MP2 and SIGA-MP2LNote 2: approved with personality code 7SIGA-UM Universal Class A/B Module 262y/04Note 1: approved with the following ancillaries - SIGA-MP1, SIGA-MP2 and SIGA-MP2LNote 2: approved with personality codes 3, 4, 8, 11, 12, 15, 16 and 18SIGA-CR Control Relay Module 262y/05Note 1: approved with the following ancillaries - SIGA-MP1, SIGA-MP2 and SIGA-MP2LNote 2: approved with personality code 8SIGA-CR2 Control Relay Module 262y/06Note 1: approved with the following ancillaries - SIGA-MP1, SIGA-MP2 and SIGA-MP2LNote 2: approved with personality code 8SIGA-CRR Polarity Reversal Relay Module 262y/07Note 1: approved with the following ancillaries - SIGA-MP1, SIGA-MP2 and SIGA-MP2LNote 2: approved with personality code 8SIGA-CT1 Single Input Module 262y/08Note 1: approved with the following ancillaries - SIGA-MP1, SIGA-MP2 and SIGA-MP2LNote 2: approved with personality codes 3, 4 and 18SIGA-CT2 Dual Input Module 262y/09Note 1: approved with the following ancillaries - SIGA-MP1, SIGA-MP2 and SIGA-MP2LNote 2: approved with personality codes 3, 4 and 18SIGA-MM1 Monitor Module 262y/10Note 1: approved with the following ancillaries - SIGA-MP1, SIGA-MP2 and SIGA-MP2LNote 2: approved with personality code 3SIGA-IM Isolator Module (SIGA-MP1, SIGA-MP2 and SIGA-MP2L) 262x/01SIGA-IB Analogue addressable short circuit isolator base 902b/01Note:1. Certified for used with fire detector models -SIGA-IPHSI, SIGA-PHSI, SIGA-PSI,SIGA-ISI and SIGA-HRSI.SIGA-IB4Analogue addressable short circuit isolator base902b/02(with 4 inch mounting adaptors)Note:1. Certified for used with fire detector models -SIGA-IPHSI, SIGA-PHSI, SIGA-PSI,SIGA-ISI and SIGA-HRSI.AncillariesSIGA-MP1 Mounting PlateSIGA-MP2 Mounting PlateSIGA-MP2L Mounting Plate18 Jan 2014 373

PART 1: SECTION 6LINE UNITSVimpex LimitedStar Lane, Great Wakering, Essex SS3 0PJ, United KingdomTel: +44 (0) 1702 216999 • Fax: +44 (0) 1702 216699E-mail: sales@vimpex.co.uk • Website: www.vimpex.co.ukCertificate No: 456b to EN 54-17: 2005Certificate No: 456c to EN 54-17: 2005 and EN 54-18: 2005Certificated ProductsLPCB Ref.No.BA873x0/MT/SCI Isolating sounder base (shallow) 456b/01Notes:1 Key for certification; x indicates body colour: 3 = White, 4 = Red.2 The device is approved when used with the DINT1 Interface(refer to LPCB Cert. Ref. 456c).3 The device is approved when used with the Hosiden BessonSounder Banshee MT and Sounder/Strobe LED FlashtoneBanshee MT. (refer to LPCB Cert. Ref. 715a).BA873x1/MT/SCI Isolating sounder base (deep) 456b/02Notes:1 Key for certification; x indicates body colour: 3 = White, 4 = Red.2 The device is approved when used with the DINT1 Interface(refer to LPCB Cert. Ref. 456c).3 The device is approved when used with the Hosiden BessonSounder Banshee MT and Sounder/Strobe LED FlashtoneBanshee MT. (refer to LPCB Cert. Ref. 715a).DINT1 Isolating Sounder Interface Card 456c/01Notes:1. The device is approved for use with theBA873xx/MT/SCI series Isolating Sounder Bases(refer to LPCB Cert. Ref. 456b)Zeta Alarm Systems by GLT Exports LimitedDetection House, 72-78 Morfa Road, Swansea SA1 2EN, United KingdomTel: +44 (0)1792 455175 • Fax: +44 (0)1792 455176E-mail: ghassan@gltexports.com • Website: www.gltexports.comCertificate No: 010ap-(cl-1) to EN 54-17: 2005Certificate No: 330k to EN 54-18: 2005 and EN 54-17: 2005Certificated ProductsLPCB Ref.No.80-090 Fyreye FE IB Negative switching isolating base 010ap/01ZIOU-DG Fyreye analogue addressable input/output unit with isolator 330k/01ZIU-MSM Fyreye analogue addressable mini switch monitor with isolator 330k/02374 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESThe purpose of a fire alarm warning device is to warn person(s) within, or in the vicinity of, a building of theoccurrence of a fire emergency situation in order to enable such person(s) to take appropriate measures. Firealarm warning devices could be sounders, visual alarm e.g. beacons, or even loudspeakers. These devicescan be of different construction and may have different parameters for example sounders are defined in termsof frequency ranges, temporal patterns and output levels, beacons are defined in terms of light temporalpattern and frequency of flashing.Guidance on the type, frequency, temporal pattern, and output levels should be sought from the applicableinstallation rule or code of practice - for example BS 5839-1 recommends sounders with continuous outputand frequency range between 500 Hz to 1000 Hz.Fire alarm devices may be used for other type of risk or non-fire emergency alarm. In this case it is alwaysrecommended that a different message, colour, temporal pattern, or frequency signal from the fire signal isselected to avoid confusion.This section lists alarm device approved for use indoors and outdoors in fire detection and fire alarm systems.Products listed in this section have been approved to: EN 54-3: 2001 Sounders EN 54-3: 2001 + A1: 2002 + A2: 2006 Sounders EN 54-23: 2010 Visual alarms EN 54-24: 2008 Loudspeakers EN 54-25: 2008 Components using radio linksThe initial approval and continued approval processes for audible, visual and loudspeaker warning devicesare outlined in scheme documents SD115, SD113, and SD039.Audit:Regular product auditing and regular factory inspections are carried out by LPCB ensuring high manufacturingstandards and continued compliance with the applicable product standard.Notes:1. EN 54-3: 2001 is now a harmonised standard for the Construction Products Directive and CE marking isrequired for most of the European market since 30 June 2005. It is therefore recommended that soundersare certificated to EN 54-3: 2001.2. EN 54-23: 2010 is now a harmonised standard for the Construction Products Directive and CE marking isrequired for most of the European market since 30 March 2013. It is therefore recommended thatsounders are certificated to EN 54-23: 2010.3. EN 54-24: 2008 is now a harmonised standard for the Construction Products Directive and CE marking isrequired for most of the European market since 30 April 2011. It is therefore recommended that soundersare certificated to EN 54-24: 2008.4. EN 54-25: 2008 is now a harmonised standard for the Construction Products Directive and CE marking isrequired for most of the European market since 1 March 2011. It is therefore recommended that radio linkcomponents are certificated to EN 54- 25: 20085. Since the LPCB uses national and international standards for the listing of products, in some instancesthe requirements of these standards may conflict with the recommendations of local codes of practice. Werecommend that specifiers seek advice from the relevant local authorities and amend their specificationsaccordingly.18 Jan 2014 375

PART 1: SECTION 7ALARM WARNING DEVICESAdvanced Electronics Limited34 Moorland Way, Nelson Park, Cramlington, Northumberland NE23 1WE, United KingdomTel: +44 (0)1670 707 111 • Fax: +44 (0)1670 707 222E-mail: ksewell@advel.co.uk • Website: www.Advel.co.ukCertificate No: 928g-(cl-5) to EN 54-3: 2001 + A1: 2002 and EN 54 -17: 2005Certificate No: 928q-(cl-1) to EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-25: 2008Certificated Products20-VLS100-ADVAnalogue addressable Type A sounder with short circuit isolatorNotes1. Meets the requirements of EN 54-3 at the following tone settings:Dual tone 990 to 650Hz, 2Hz (250ms-250ms)Pulsed tone 990Hz, 1Hz (500ms ON 500ms OFFContinuous tone 990Hz, steadyLPCB Ref.No.928g/0120-SGRBS100-ADV Wireless type A sounder base 928q/01Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 970Hz2. Warble 800/1000/1Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. Approved for use with 20-SG100-ADV, 20-SG200-ADV and SG350-ADVwireless detectors3. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary battery20-SGRBS100-AV-ADV Wireless type A audiovisual sounder base 928q/02Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 970Hz2. Warble 800/1000/1Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. Approved for use with 20-SG100-ADV, 20-SG200-ADV and SG350-ADVwireless detectors3. The Visual Warning part is not approved to EN 54-234. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary battery20-SGRS100-ADV Wireless type A wall sounder 928q/03Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary battery20-SGRS100-AV-ADV Wireless type A audiovisual wall sounder 928q/04Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. The Visual Warning part is not approved to EN 54-233. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary battery20-SGRS100-H-ADV Wireless type A Dutch tone wall sounder 928q/05Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Slow whoop 500-1200Hz3. Sweep (DIN) 1200-500Hz2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary battery376 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsLPCB Ref.No.20-SGRS100/W-ADV Wireless type A wall sounder white colour 928q/06Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary battery20-SGRS100-AV/W-ADV Wireless type A audiovisual wall sounder white colour 928q/07Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. The Visual Warning part is not approved to EN 54-233. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary battery20-SGRS100-H/W-ADV Wireless type A Dutch tone wall sounder white colour 928q/08Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Slow whoop 500-1200Hz3. Sweep (DIN) 1200-500Hz2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryDetectors:20-SG100-ADV20-SG200-ADV20-SG350-ADVWireless optical smoke detectorWireless multi-criteria detectorWireless heat detectorAdvantronic Systems S.L.C/Yunque 9 Nave B1, Tres Cantos, Madrid 28760, SpainTel: +34 91 806 2343 • Fax: +34 91 803 1171E-mail: jpedrouzo@advantronic.es • Website: www.advantronic.esCertificate No: 928g-(cl-3) to EN 54-3: 2001 + A1: 2002 and EN 54 -17: 2005Certificate No: 928q-(cl-2) to EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-25: 2008Certificated ProductsAV112ALAnalogue addressable Type A sounder with short circuit isolatorNotes1. Meets the requirements of EN 54-3 at the following tone settings:Dual tone 990 to 650Hz, 2Hz (250ms-250ms)Pulsed tone 990Hz, 1Hz (500ms ON 500ms OFFContinuous tone 990Hz, steadyLPCB Ref.No.928g/01AVW110AL Wireless type A sounder base 928q/01Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 970Hz2. Warble 800/1000/1Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. Approved for use with ATW110A, ATW120A and ATW130A wireless detectors3. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryAVW110VAL Wireless type A audiovisual sounder base 928q/02Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 970Hz18 Jan 2014 377

PART 1: SECTION 7ALARM WARNING DEVICESCertificated Products2. Warble 800/1000/1Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. Approved for use with ATW110A, ATW120A and ATW130A wireless detectors3. The Visual Warning part is not approved to EN 54-234. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryLPCB Ref.No.AVW112AL Wireless type A wall sounder 928q/03Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryAVW113AL Wireless type A audiovisual wall sounder 928q/04Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. The Visual Warning part is not approved to EN 54-233. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryDetectors:ATW110AATW120AATW130AWireless optical smoke detectorWireless multi-criteria detectorWireless heat detectorApollo Fire Detectors Limited36 Brookside Road, Havant, Hampshire PO9 1JR, United KingdomTel: +44 (0)2392 492412 • Fax: +44 (0)2392 492754E-mail: enquiries@apollo-fire.co.ukCertificate No: 010af to EN 54-3: 2001Wireless SoundersCertificated ProductsLPCB Ref.No.XPA-SO-14001-APO Xpander addressable sounder (Red ) (XPA-SB-10023-APO mounting base) 010af/01Notes:1. Meets the requirements of EN 54-3: 2001 at tones 1, 2, 3, 4, 5, 6, 7 & 132. The complete radio base/sounder combination is available as Apollo Part No.:XPA-CB-14001-APO3. The device must be used with the following batteries only:MN1500 LR6 - 1.5 volt alkaline AA cellsMN1400 LR14 - 1.5 volt alkaline C cells4. The radio link functionality is not included within the scope of approval.XPA-SO-14002-APO Xpander addressable sounder (White) (XPA-SB-10024-APO mounting base) 010af/02Notes:1. Meets the requirements of EN 54-3: 2001 at tones 1, 2, 3, 4, 5, 6, 7 & 132. The complete radio base/sounder combination is available as Apollo Part No.:XPA-CB-14002-APO3. The device must be used with the following batteries only:MN1500 LR6 - 1.5 volt alkaline AA cellsMN1400 LR14 - 1.5 volt alkaline C cells4. The radio link functionality is not included within the scope of approval.XPA-SN-14003-APO Xpander addressable sounder strobe (Red head / red lens) (XPA-SB-10023-APO 010af/03378 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsXPA-SN-14004-APOXPA-SN-14005-APOmounting base)Notes:1. Meets the requirements of EN 54-3: 2001 at tones 1, 2, 3, 4, 5, 6, 7 & 132. The complete radio base/sounder combination is available as Apollo Part No.:XPA-CB-14003-APO3. The device must be used with the following batteries only:MN1500 LR6 - 1.5 volt alkaline AA cellsMN1400 LR14 - 1.5 volt alkaline C cells4. The radio link functionality is not included within the scope of approval.Xpander addressable sounder beacon (Red head / amber lens) (XPA-SB-10024-APOmounting base)Notes:1. Meets the requirements of EN 54-3: 2001 at tones 1, 2, 3, 4, 5, 6, 7 & 132. The complete radio base/sounder combination is available as Apollo Part No.:XPA-CB-14004-APO3. The device must be used with the following batteries only:MN1500 LR6 - 1.5 volt alkaline AA cellsMN1400 LR14 - 1.5 volt alkaline C cells4. The radio link functionality is not included within the scope of approval.Xpander addressable sounder beacon (White head / clear lens) (XPA-SB-10024-APOmounting base)Notes:1. Meets the requirements of EN 54-3: 2001 at tones 1, 2, 3, 4, 5, 6, 7 & 132. The complete radio base/sounder combination is available as Apollo Part No.:XPA-CB-14005-APO3. The device must be used with the following batteries only:MN1500 LR6 - 1.5 volt alkaline AA cellsMN1400 LR14 - 1.5 volt alkaline C cells4. The radio link functionality is not included within the scope of approval.LPCB Ref.No.010af/04010af/05Bases:XPA-SB-10023-APO Radio link mounting base - redXPA-SB-10024-APO Radio link mounting base - whiteCertificate No: 010ak to EN54-3: 2001 +A1:2002 +A2:2006Certificate No: 010ax to EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005SoundersCertificated ProductsLPCB Ref.No.55000-001 XP95 Type B intelligent open area sounder (Red) 010ak/01Note:1. Meets the requirements of EN 54-3:2001 at the following tones:Apollo standard-840Hz,0.5s/558Hz,0.5sDutch (slow whoop)- 500-1200Hz in 3.5s, 0.5s offGerman DIN-1200-500Hz over 1s55000-002 XP95 Type B intelligent open area sounder (White) 010ak/02Note:1. Meets the requirements of EN 54-3:2001 at the following tones:Apollo standard-840Hz,0.5s/558Hz,0.5sDutch (slow whoop)- 500-1200Hz in 3.5s, 0.5s offGerman DIN-1200-500Hz over 1s55000-005 XP95 Type B intelligent open area sounder beacon (Red) 010ak/03Note:1. Meets the requirements of EN 54-3:2001 at the following tones:Apollo standard-840Hz,0.5s/558Hz,0.5sDutch (slow whoop)- 500-1200Hz in 3.5s, 0.5s offGerman DIN-1200-500Hz over 1s55000-006 XP95 Type B intelligent open area sounder beacon (White) 010ak/04Note:1. Meets the requirements of EN 54-3:2001 at the following tones:Apollo standard-840Hz,0.5s/558Hz,0.5sDutch (slow whoop)- 500-1200Hz in 3.5s, 0.5s offGerman DIN-1200-500Hz over 1s58000-005 Discovery Type B intelligent open area sounder beacon (Red)enhanced deep isolating bases)Note:010ak/0518 Jan 2014 379

PART 1: SECTION 7ALARM WARNING DEVICESCertificated Products1. Meets the requirements of EN 54-3:2001 at the following tones:T1- Apollo Evacuation 558Hz,0.5s/840Hz,0.5sT3- Dutch Slow Whoop 500-1200Hz in 3.5s, 0.5s offT4- German DIN1200-500Hz over 1sLPCB Ref.No.58000-007 Discovery Type B intelligent open area sounder beacon (White)010ak/06enhanced deep isolating bases)Note:1. Meets the requirements of EN 54-3:2001 at the following tones:T1- Apollo Evacuation 558Hz,0.5s/840Hz,0.5sT3- Dutch Slow Whoop 500-1200Hz in 3.5s, 0.5s offT4- German DIN1200-500Hz over 1s45681-7020 Discovery Sounder Base (White) with Isolator (45681-292 and 45681-293 Caps) 10ax/01Note:1. Meets the requirements of EN 54-3: 2001 at the following tone settings:Tone 1 Apollo Evacuation Tone - 567Hz for 0.5s, 850Hz for 0.5sTone 12 Alternating - (Hochiki & Fulleon) - 925Hz for 0.25s, 626Hz for 0.25sTone 14 Medium Sweep - 800Hz to 970Hz at 1 HzTone 3 Dutch Slow Whoop (sweep) - 500Hz - 1200Hz for 3.5s/0Hz, 0.5s offTone 4 DIN Tone (sweep) - 1200Hz - 500Hz for 1sTone 18 Swedish Fire Tone - 660 Hz, 150ms on, 150ms offTone 0 Apollo Alert Tone - 1s off, 1s 850HzTone 11 Continuous (Hochiki & Fulleon) - 925HzTone 13 Continuous - 970HzTone 2 Continuous - 850HzTone 17 Swedish all clear signal - Continuous - 660Hz2. Type A and approved for sounder volumes 2-7 only.Accessories:45681-292 White Cap (Lockable)45681-293 Red Cap (Lockable)Bases:45681-517 Enhanced deep isolating base (White)45681-518 Enhanced deep isolating base (Red)Certificate No: 010aw to EN54-23: 2010, EN54-3: 2001 + A1:2002 + A2: 2006 and EN54-17: 2005Alarm Warning DevicesCertificated Products45681-700 Discovery Sounder Visual Alarm Device Base (White) with Isolator (45681-292 and45681-293 Caps)Notes:1. The VAD is rated as open class: (Refer to installation guide).2. The VAD operating voltage range 17-28V DC (24V nominal).3. The VAD Light mode (light pattern details): 0.5Hz mode only.4. The VAD includes a short circuit isolator.5. The VAD is a Type A device and includes synchronisation6. Meets the requirements of EN 54-3: 2001 at the following tone settings:Tone 1 Apollo Evacuation Tone - 567Hz for 0.5s, 850Hz for 0.5sTone 12 Alternating - (Hochiki & Fulleon) - 925Hz for 0.25s,626Hz for 0.25sTone 14 Medium Sweep - 800Hz to 970Hz at 1 HzTone 3 Dutch Slow Whoop (sweep) - 500Hz - 1200Hz for 3.5s,off for 0.5sTone 4 DIN Tone (sweep) - 1200Hz - 500Hz for 1sTone 18 Swedish Fire Tone - 660 Hz, 150ms on, 150ms offTone 0 Apollo Alert Tone - 1s off, 1s 850HzTone 11 Continuous (Hochiki & Fulleon) - 925HzTone 13 Continuous - 970HzTone 2 Continuous - 850HzTone 17 Swedish all clear signal - Continuous - 660Hz7. Approved for sounder volumes 2-7 onlyLPCB Ref.No.010aw/01Accessories:45681-292 White Cap (Lockable)380 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated Products45681-293 Red Cap (Lockable)45681-701 Discovery Marine Sounder Visual Alarm Device Base (White) with Isolator (45681-292and 45681-293 Caps)Notes:1. The VAD is rated as open class: (Refer to installation guide).2. The VAD operating voltage range 17-28V DC (24V nominal).3. The VAD Light mode (light pattern details): 0.5Hz mode only.4. The VAD includes a short circuit isolator.5. The VAD is a Type A device and includes synchronisation.6. Meets the requirements of EN 54-3: 2001 at the following tone settings:Tone 1 Apollo Evacuation Tone - 567Hz for 0.5s, 850Hz for 0.5sTone 12 Alternating - (Hochiki & Fulleon) - 925Hz for 0.25s,626Hz for 0.25sTone 14 Medium Sweep - 800Hz to 970Hz at 1 HzTone 3 Dutch Slow Whoop (sweep) - 500Hz - 1200Hz for 3.5s,off for 0.5sTone 4 DIN Tone (sweep) - 1200Hz - 500Hz for 1sTone 18 Swedish Fire Tone - 660 Hz, 150ms on, 150ms offTone 0 Apollo Alert Tone - 1s off, 1s 850HzTone 11 Continuous (Hochiki & Fulleon) - 925HzTone 13 Continuous - 970HzTone 2 Continuous - 850HzTone 17 Swedish all clear signal - Continuous - 660Hz7. Approved for sounder volumes 2-7 onlyLPCB Ref.No.010aw/02Accessories:45681-292 White Cap (Lockable)45681-293 Red Cap (Lockable)45681-705 XP95 Sounder Visual Alarm Device Base (white) with Isolator(45681-292 and 45681-293 Caps)Notes:1. The VAD is rated as open class: (Refer to installation guide).2. The VAD operating voltage range 17-28V DC (24V nominal).3. The VAD Light mode (light pattern details): 0.5Hz mode only.4. The VAD includes a short circuit isolator.5. The VAD is a Type A device and includes synchronisation.6. Meets the requirements of EN 54-3: 2001 at the following tone settings:Tone 1 Apollo Evacuation Tone - 567Hz for 0.5s, 850Hz off for 0.5sTone 0 Apollo Alert Tone - 1s off, 1s 850Hz7. Approved for sounder volumes 2-7 only.Accessories:45681-292 White Cap (Lockable)45681-293 Red Cap (Lockable)45681-706 XP95 Sounder Visual Alarm Device Base (white) Slow Whoop with Isolator(45681-292 and 45681-293 Caps)Notes:1. The VAD is rated as open class: (Refer to installation guide).2. The VAD operating voltage range 17-28V DC (24V nominal).3. The VAD Light mode (light pattern details): 0.5Hz mode only.4. The VAD includes a short circuit isolator.5. The VAD is a Type A device and includes synchronisation.6. Meets the requirements of EN 54-3: 2001 at the following tone settings:Tone 2 Continuous - 850HzTone 3 Dutch Slow Whoop (sweep) - 500 Hz - 1200Hz for 3.5s/0Hz,off for 0.5s7. Approved for sounder volumes 2-7 only.010aw/03010aw/04Accessories:45681-292 White Cap (Lockable)45681-293 Red Cap (Lockable)45681-707 XP95 Sounder Visual Alarm Device Base (white) DIN with Isolator(45681-292 and 45681-293 Caps)Notes:1. The VAD is rated as open class: (Refer to installation guide).2. The VAD operating voltage range 17-28V DC (24V nominal).3. The VAD Light mode (light pattern details): 0.5Hz mode only.4. The VAD includes a short circuit isolator function5. The VAD is a Type A device and includes synchronisation.6. Meets the requirements of EN 54-3: 2001 at the following tone settings:Tone 4 DIN Tone (sweep) - 1200Hz - 500Hz for 1sTone 2 Continuous - 850Hz010aw/0518 Jan 2014 381

PART 1: SECTION 7ALARM WARNING DEVICESCertificated Products7. Approved for sounder volumes 2-7 only.Accessories:45681-292 White Cap (Lockable)45681-293 Red Cap (Lockable)LPCB Ref.No.Certificate No: 010ay to EN 54-17: 2005 and EN 54-23: 2010Alarm Warning DevicesCertificated ProductsLPCB Ref.No.45681-709 XP95 Visual Alarm Device Base (White) with Isolator 010ay/01Notes:1. The VAD is rated as open class: (Refer to installation guide).2. The VAD operating voltage range 17-28V DC (24V nominal).3. The VAD Light mode (light pattern details): 0.5Hz mode only.4. The VAD includes a short circuit isolator.5. The VAD is a Type A device and includes synchronisation.Accessories:45681-292 White Cap (Lockable)45681-293 Red Cap (Lockable)Argus Security S.r.l.Via del Canneto 14, Valle delle Noghere, 34015 Muggia, Trieste, ItalyTel: +39 (0) 402821110 • Fax: +39 (0) 402823483E-mail: dcresseri@argussecurity.it • Website: www.argussecurity.itCertificate No: 928g to EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54 -17: 2005Certificate No: 928q to EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-25: 2008SoundersCertificated ProductsLPCB Ref.No.VLS100-H Analogue addressable Type A sounder with short circuit isolator 928g/02Notes1. Meets the requirements of EN 54-3 at the following tone settings:Slow whoop tone 500 to 1200Hz, 3s sweep, 0.5s silenceSweep (DIN) tone 1200 to 500Hz, 1HzContinuous tone 990Hz, steadyVLS100 Analogue addressable Type A sounder with short circuit isolator 928g/01Notes1. Meets the requirements of EN 54-3 at the following tone settings:Dual tone 990 to 650Hz, 2Hz (250ms-250ms)Pulsed tone 990Hz, 1Hz (500ms ON - 500ms OFF)Continuous tone 990Hz, steadySGRBS100 Wireless type A sounder base 928q/01Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 970Hz2. Warble 800/1000/1Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. Approved for use with SG100, SG200 and SG350 wireless detectors3. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batterySGRBS100-AV Wireless type A audiovisual sounder base 928q/02Notes:1. Meets the requirements of EN54-3 at the following tones:-382 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated Products1. Continuous 970Hz2. Warble 800/1000/1Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. Approved for use with SG100, SG200 and SG350 wireless detectors3. The Visual Warning part is not approved to EN 54-234. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryLPCB Ref.No.SGRS100 Wireless type A wall sounder 928q/03Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batterySGRS100-AV Wireless type A audiovisual wall sounder 928q/04Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. The Visual Warning part is not approved to EN 54-233. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batterySGRS100-H Wireless type A Dutch tone wall sounder 928q/05Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Slow whoop 500-1200Hz3. Sweep (DIN) 1200-500Hz2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batterySGRS100/W Wireless type A wall sounder white colour 928q/06Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batterySGRS100-AV/W Wireless type A audiovisual wall sounder white colour 928q/07Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. The Visual Warning part is not approved to EN 54-233. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batterySGRS100-H/W Wireless type A Dutch tone wall sounder white colour 928q/08Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Slow whoop 500-1200Hz3. Sweep (DIN) 1200-500Hz2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary battery18 Jan 2014 383

PART 1: SECTION 7ALARM WARNING DEVICESDetectors:SG100 Wireless optical smoke detectorSG200 Wireless multi-criteria detectorSG350 Wireless heat detectorArgus-Spectrum65 Serdobolskaya St, St. Petersburg 197342, Russian FederationTel: +7 812 7037500 • Fax: +7 812 7037501E-mail: mail@argus-spectr.ru • Website: www.argus-spectr.ruCertificate No: 928g-(cl-2) to EN54-3: 2001 + A1: 2002 and EN 54 -17: 2005Certificate No: 928q-(cl-3) to EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-25: 2008Certificated ProductsVLS100-HVLS100Analogue addressable Type A sounder with short circuit isolatorNotes1. Meets the requirements of EN 54-3 at the following tone settings:Slow whoop tone 300 to 1200Hz, 3s sweep, 0.5s silenceSweep (DIN) tone 1200 to 500Hz, 1HzContinuous tone 990Hz, steadyAnalogue addressable Type A sounder with short circuit isolatorNotes1. Meets the requirements of EN 54-3 at the following tone settings:Dual tone 990 to 650Hz, 2Hz (250ms-250ms)Pulsed tone 990Hz, 1Hz (500ms ON - 500ms OFFLPCB Ref.No.928g/02928g/01Continuous tone 990Hz, steadySGRBS100 Wireless type A sounder base 928q/01Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 970Hz2. Warble 800/1000/1Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. Approved for use with SG100, SG200 and SG350 wireless detectors3. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batterySGRBS100-AV Wireless type A audiovisual sounder base 928q/02Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 970Hz2. Warble 800/1000/1Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. Approved for use with SG100, SG200 and SG350 wireless detectors3. The Visual Warning part is not approved to EN 54-234. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batterySGRS100 Wireless type A wall sounder 928q/03Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batterySGRS100-AV Wireless type A audiovisual wall sounder 928q/04Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz384 18 Jan 2014

Certificated Products2. The Visual Warning part is not approved to EN 54-233. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryPART 1: SECTION 7ALARM WARNING DEVICESLPCB Ref.No.SGRS100-H Wireless type A Dutch tone wall sounder 928q/05Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Slow whoop 500-1200Hz3. Sweep (DIN) 1200-500Hz2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batterySGRS100/W Wireless type A wall sounder - white colour 928q/06Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batterySGRS100-AV/W Wireless type A audiovisual wall sounder white colour 928q/07Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. The Visual Alarm part is not approved to EN 54-233. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batterySGRS100-H/W Wireless type A Dutch tone wall sounder white colour 928q/08Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Slow whoop 500-1200Hz3. Sweep (DIN) 1200-500Hz2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryDetectors:SG100 Wireless optical smoke detectorSG200 Wireless multi-criteria detectorSG350 Wireless heat detectorATEIS Middle East FZCOLIU 11 Dubai Silicon Oasis, Post Box 293640, Dubai, United Arab EmiratesTel: +971 4 3262730 • Fax: +971 4 3262731E-mail: info@ateis.ae • Website: www.ateis.aeCertificate No: 928q-(cl-4) to EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-25: 2008Certificate No: 1154g to EN 54-3: 2001 + A1: 2002 + A2: 2006, EN 54-17: 2005Certificated ProductsLPCB Ref.No.VELOX WLSB100 Wireless type A sounder base 928q/01Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 970Hz2. Warble 800/1000/1Hz18 Jan 2014 385

PART 1: SECTION 7ALARM WARNING DEVICESCertificated Products3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. Approved for use with VELOX WL100, VELOXWL200 AND VELOXWL 350wireless detectors3. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryLPCB Ref.No.VELOX WLSB100-AV Wireless type A audiovisual sounder base 928q/02Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 970Hz2. Warble 800/1000/1Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. Approved for use with VELOX WL100, VELOXWL200 AND VELOXWL 350wireless detectors3. The Alarm Warning part is not approved to EN 54-234. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryVELOX WLS100 Wireless type A wall sounder 928q/03Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryVELOX WLS100-AV Wireless type A audiovisual wall sounder 928q/04Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. The Alarm Warning part is not approved to EN 54-233. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryVELOX WLS100-H Wireless type A Dutch tone wall sounder 928q/05Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Slow whoop 500-1200Hz3. Sweep (DIN) 1200-500Hz2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryVELOX 40300VELOX 40300-HAnalogue Addressable Type A Sounder with Short Circuit Isolator NoteMeets the requirements of EN 54-3 at the following tone settings:Dual tone: 990Hz and650Hz, 2Hz (250ms-250ms)Pulsed tone: 990Hz, 1Hz (500ms ON - 500msOFF)Continuous tone: 990Hz, steadyAnalogue Addressable Type A Sounder with Short Circuit IsolatorNoteMeets the requirements of EN 54-3 at the following tone settings: Slow whoop tone500Hz to 1200Hz, 3s sweep, 0.5s silence Sweep (DIN) tone 1200Hz to 500Hz,1HzContinuous tone 990Hz, steady1154g/011154g/02Detectors:VELOX WL100VELOX WL200VELOX WL350Wireless optical smoke detectorWireless multi-criteria detectorWireless heat detector386 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESAutronica Fire & Security ASPostboks 5620 NO-7483, Trondheim, NorwayTel: +47 73582500 • Fax: +47 73582501E-mail: info@autronicafire.no • Website: www.autronicafire.noCertificate No: 378h-(cl-1) to EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005Certificated ProductsLPCB Ref.No.116-BBQ-230 Addressable indoor sounder and beacon with isolator 378h/01Notes:1) meets the requirements of EN 54-3: 2001 for the following tones:- General Alarm (880Hz, 7*0.5 sec pulse & 1*5.5)- Evacuate (880Hz, 1 sec on / 1 sec off, forever)- Alert (880Hz On, forever)- Bell Test (0.5 sec on every 8 sec)- Slow Whoop (3.5 sec on / 0.5 sec off, 500-1200 Hz)2) the beacon functionality is not included within the scope of this approval116-BBQ-230/IP Addressable outdoor sounder and beacon with isolator 378h/02Notes:1) meets the requirements of EN 54-3: 2001 for the following tones:- General Alarm (880Hz, 7*0.5 sec pulse & 1*5.5)- Evacuate (880Hz, 1 sec on / 1 sec off, forever)- Alert (880Hz On, forever)- Bell Test (0.5 sec on every 8 sec)- Slow Whoop (3.5 sec on / 0.5 sec off, 500-1200 Hz)2) the beacon functionality is not included within the scope of this approval116-BBR-230 Addressable indoor sounder with isolator 378h/03Notes:1) meets the requirements of EN 54-3: 2001 for the following tones:- General Alarm (880Hz, 7*0.5 sec pulse & 1*5.5)- Evacuate (880Hz, 1 sec on / 1 sec off, forever)- Alert (880Hz On, forever)- Bell Test (0.5 sec on every 8 sec)- Slow Whoop (3.5 sec on / 0.5 sec off, 500-1200 Hz)116-BBR-230/IP Addressable outdoor sounder with isolator 378h/04Notes:1) meets the requirements of EN 54-3: 2001 for the following tones:- General Alarm (880Hz, 7*0.5 sec pulse & 1*5.5)- Evacuate (880Hz, 1 sec on / 1 sec off, forever)- Alert (880Hz On, forever)- Bell Test (0.5 sec on every 8 sec)- Slow Whoop (3.5 sec on / 0.5 sec off, 500-1200 Hz)116-BBR-130 Addressable indoor base sounder with isolator 378h/05Notes:1) meets the requirements of EN 54-3: 2001 for the following tones:- General Alarm (880Hz, 7*0.5 sec pulse & 1*5.5)- Evacuate (880Hz, 1 sec on / 1 sec off, forever)- Alert (880Hz On, forever)- Bell Test (0.5 sec on every 8 sec)- Slow Whoop (3.5 sec on / 0.5 sec off, 500-1200 Hz)116-BBQ-130 Addressable indoor base sounder and beacon with isolator 378h/06Notes:1) meets the requirements of EN 54-3: 2001 for the following tones:- General Alarm (880Hz, 7*0.5 sec pulse & 1*5.5)- Evacuate (880Hz, 1 sec on / 1 sec off, forever)- Alert (880Hz On, forever)- Bell Test (0.5 sec on every 8 sec)- Slow Whoop (3.5 sec on / 0.5 sec off, 500-1200 Hz)2) the beacon functionality is not included within the scope of this approval116-BBR-131 Addressable indoor base sounder with isolator 378h/07Notes:1) meets the requirements of EN 54-3: 2001 for the following tones:- General Alarm (880Hz, 7*0.5 sec pulse & 1*5.5)- Evacuate (880Hz, 1 sec on / 1 sec off, forever)- Alert (880Hz On, forever)- Bell Test (0.5 sec on every 8 sec)- Slow Whoop (3.5 sec on / 0.5 sec off, 500-1200 Hz)116-BBQ-131 Addressable indoor base sounder and beacon with isolator 378h/0818 Jan 2014 387

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsNotes:1) meets the requirements of EN 54-3: 2001 for the following tones:- General Alarm (880Hz, 7*0.5 sec pulse & 1*5.5)- Evacuate (880Hz, 1 sec on / 1 sec off, forever)- Alert (880Hz On, forever)- Bell Test (0.5 sec on every 8 sec)- Slow Whoop (3.5 sec on / 0.5 sec off, 500-1200 Hz)2) the beacon functionality is not included within the scope of this approvalLPCB Ref.No.Bardic by Honeywell (Novar Systems Ltd)140 Waterside Road, Hamilton Industrial Estate, Leicester LE5 1TN, United KingdomTel: +44 (0) 116 246 2212 • Fax: +44 (0) 116 246 2210Website: www.bardic.co.ukCertificate No: 042bk to EN 54-3: 2001 + A1: 2002 +A2: 2006Certificated ProductsLPCB Ref.No.ZF-IP-SN-ST-RR Conventional Red LP Outdoor Sounder/Strobe Red Lens 042bk/07Notes:1. Meets the requirements of EN 54-3:2001 at Tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.2. Certification excludes Strobe function.Bristol Fire LtdThe Colin Saunders Innovation Centre, Mewburn Road, Banbury, Oxfordshire OX16 9PA, United KingdomTel: +44 1295 817623E-mail: sami@bristol-fire.com • Website: www.bristol-fire.comCertificate No: 506e-(cl-2) to EN 54-3 : 2001 + A1: 2002 + A2: 2006Certificated ProductsLPCB Ref.No.BF-AB-0418 Conventional fire alarm bell 506e/01Ceasefire Industries Ltd"Doli Chambers", Flat 602 6th Floor behind strand cinema, Colaba, Mumbai-400 005, IndiaTel: + 91-(0) 22-22854677 • Fax: +91-(0) 22-66349069E-mail: response@ceasefire.in • Website: www.ceasefire.inCertificate No: 164h-(cl-1) to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificated ProductsLPCB Ref.No.YBO-BSB (WHT) Loop powered base sounder and beacon (YBN-R/3 and YBO-R/SCI bases). 164h/031) The beacon function of this device is not included in the scope of thisapproval.2) Meets the requirements of EN54-3 at the following tones:1) - 925 Hz : 250 ms / 628 Hz : 250 ms2) - 925 Hz Continuous3) - 628 Hz Continuous4) - (French) 554 Hz : 100 ms/ 440 Hz : 400 ms5) - (Swedish) 660 Hz : 150 ms/ Off : 150 ms388 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated Products6) - 925Hz : 15oms / Off : 600 ms7) - 670 hZ : 250MS / 845 hZ : 370 MS8) - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms9) - 1200 Hz : 500 ms/ 500 Hz : 500 ms10) - 970 Hz : 500 ms / Off : 500 ms11) - Sweet 800 Hz - 970 Hz over 140 ms (7 Hz)12) - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz)13) - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz)14) - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz)15) - Sweet 2400 Hz - 2850 Hz over 1000 ms (1 Hz)16) - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz)17) - ISO8201 : 970 Hz : 500 ms18) - ISO8201 : 2850 Hz : 500 ms19) - 800 Hz : 250 ms / 970 Hz : 250 ms20) - 2850 Hz Continuous21) - 2400 Hz : 250 ms / 2850 Hz : 250 ms22) - 800 Hz : 500 ms / 970 Hz : 500 ms23) - 2850 Hz : 500 ms / Off : 500 ms24) - 925 Hz : 250 ms / Off : 1000 ms25) - 970 Hz Continuous26) - 660 Hz : 1800 ms / Off: 1800 ms27) - 660 Hz : 6500 ms / Off : 13000 ms28) - 660 Hz Continuous29) - 554 Hz : 500 ms / 440 Hz : 500 ms30) - 660 Hz : 500 ms / Off : 500 ms31) - 2850 Hz : 150 ms / Off : 100 ms32) - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz)33) - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz)34) - 988 Hz : 250 ms / 645 Hz : 250 ms35) - 510 Hz : 250 ms / 610 Hz : 250 ms36) - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz)37) - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz)38) - 845 Hz Continuous39) - 970 Hz : 1000 ms / Off : 1000 ms40) - 800 Hz : 150 ms / 970 Hz : 150 ms41) - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz)42) - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz)43) - 2850 Hz : 1000 ms / Off : 1000 ms44) - 2400 Hz : 150 ms / 2850 Hz : 150 ms45) - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms46) - 440 Hz : 600 ms / Off : 600 ms47) - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms48) - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms49) - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms50) - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms51) - Whoop 500-1200 3.5s/0.5sLPCB Ref.No.BasesYBN -R/3 baseYBO-R/SCI isolator baseControl Equipment LimitedHillcrest Business Park, Dudley, West Midlands DY2 9AP, United KingdomTel: +44 (0)1384 458651 • Fax: +44 (0)1384 458972E-mail: celsales@controlequipment.co.uk • Website: www.controlequipment.comCertificate No: 681g-(cl-2) to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificate No: 378e-(cl-2) to EN 54-17: 2005, EN 54-3: 2001 + A1: 2002 + A2: 2006Certificated ProductsFC430SBAnalogue addressable type A sounder baseNote:1. Meets the requirements of EN 54-3 at the following tones:Fast SweepDutch Slow Whoop 500Hz to 1200HzTemporal 3 880HzLPCB Ref.No.681g/0118 Jan 2014 389

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsFC410LPSYRFC410LPSYWFC410LPSYFC410LPAVRFC410LPAVWFC410LPAVFC430LPASBFC430LPSBFireClass addressable loop powered Type A sounder (red) with short circuit isolatorNote:1. Meets the requirements of EN 54-3 at the following tones:1 - Dutch Slow WhoopSweep2 - 7Hz Fast Sweep6 - Temporal 3 (ISO8201)9 - Continuous 850FireClass addressable loop powered Type A sounder (white) with short circuit isolatorNote:1. Meets the requirements of EN 54-3 at the following tones:1 - Dutch Slow WhoopSweep2 - 7Hz Fast Sweep6 - Temporal 3 (ISO8201)9 - Continuous 850FireClass addressable loop powered Type B sounder (red) with short circuit isolatorNote:1. Meets the requirements of EN 54-3 at the following tones:1 - Dutch Slow WhoopSweep2 - 7Hz Fast Sweep6 - Temporal 3 (ISO8201)9 - Continuous 850FireClass addressable loop powered Type A sounder beacon (red) with short circuitisolatorNotes:1. Meets the requirements of EN 54-3 at the following tones:1 - Dutch SlowWhoop Sweep2 - 7Hz Fast Sweep6 - Temporal 3 (ISO8201)9 - Continuous 8502. The beacon function of this device is not included in the scope of this approval.FireClass addressable loop powered Type A sounder beacon (white) with short circuitisolatorNotes:1. Meets the requirements of EN 54-3 at the following tones:1 - Dutch SlowWhoop Sweep2 - 7Hz Fast Sweep6 - Temporal 3 (ISO8201)9 - Continuous 8502. The beacon function of this device is not included in the scope of this approval.FireClass addressable loop powered Type B sounder beacon (red) with short circuitisolatorNotes:1. Meets the requirements of EN 54-3 at the following tones:1 - Dutch SlowWhoop Sweep2 - 7Hz Fast Sweep6 - Temporal 3 (ISO8201)9 - Continuous 8502. The beacon function of this device is not included in the scope of this approval.FireClass Loop powered sounder beacon base with short circuit isolatorNotes:1. Meets the requirements of EN 54-3 at the following tones:1 - Dutch Slow Whoop, 500 to 1200Hz2 - 7Hz Fast Sweep, 800 to 970Hz3 - BS 1Hz Sweep, 800 to 970Hz4 - 2 Tone, 660 / 880Hz5 - Temporal 4, 880Hz6 - Australian Sound (AS 1670.4) Temporal 3 type tone, 500 to 1200Hz7 - March Time Beep, 880Hz8 - Continuous, 970Hz9 - DIN 1Hz Sweep, 1200 to 500Hz10 - Banshee LF Buzzer, 800 to 950Hz11 - 3Hz Banshee Fast Sweep, 800 to 950Hz12 - 9Hz Banshee Fast Sweep, 800 to 950Hz13 - Alternating (NF-S 32.001), 554 / 440Hz14 - Yodalarm, 800 / 1000Hz15 - Conventional Bell, 1450Hz2. The beacon function of this device is not included in the scope of this approval.FireClass Loop powered sounder base with short circuit isolatorNote:1. Meets the requirements of EN 54-3 at the following tones:1 - Dutch Slow Whoop, 500 to 1200Hz2 - 7Hz Fast Sweep, 800 to 970Hz3 - BS 1Hz Sweep, 800 to 970Hz4 - 2 Tone, 660 / 880Hz5 - Temporal 4, 880Hz6 - Australian Sound (AS 1670.4) Temporal 3 type tone, 500 to 1200Hz7 - March Time Beep, 880Hz8 - Continuous, 970Hz9 - DIN 1Hz Sweep, 1200 to 500Hz10 - Banshee LF Buzzer, 800 to 950Hz11 - 3Hz Banshee Fast Sweep, 800 to 950Hz12 - 9Hz Banshee Fast Sweep, 800 to 950Hz13 - Alternating (NF-S 32.001), 554 / 440Hz14 - Yodalarm, 800 / 1000Hz15 - Conventional Bell, 1450HzLPCB Ref.No.378e/01378e/02378e/03378e/04378e/05378e/06378e/07378e/08390 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCooper Fulleon LimitedLlantarnam Park, Cwmbran, South Wales NP44 3AW, United KingdomTel: +44 (0)1633 628500 • Fax: +44 (0)1633 866346E-mail: sales@fulleon.co.uk • Website: www.cooperfulleon.comCertificate No: 378b to EN54-3: 2001 + A1: 2002 + A2: 2006Certificated ProductsLPCB Ref.No.ROLP Roshni Conventional Type A/B LP Sounder 378b/01Notes:1. The sounder is approved in red and white colours2. Using Deep, U-shaped and shallow sounder bases in red and white colours3. Meets the requirements of EN54-3: 2001 at the following tones:3 - Sweep 800Hz - 970Hz in 1s7 - Slow whoop 500Hz - 1200Hz in 3.5s - 0.5s silence8 - Sweep 1200Hz - 500Hz in 1s14 - Continuous 970Hz steady29 - Alternating 990Hz 250ms / 650Hz 250ms30 - Alternating 510Hz 250ms / 610Hz 250msROLP/SV Roshni Conventional Type A/B LP Sounder 378b/02Notes:1. The sounder is approved in red and white colours2. Using Deep, U-shaped and shallow sounder bases in red and white colours3. Meets the requirements of EN54-3: 2001 at the following tones:3 - Sweep 800Hz - 970Hz in 1s7 - Slow whoop 500Hz - 1200Hz in 3.5s - 0.5s silence8 - Sweep 1200Hz - 500Hz in 1s14 - Continuous 970Hz steady29 - Alternating 990Hz 250ms / 650Hz 250ms30 - Alternating 510Hz 250ms / 610Hz 250msCooper Lighting and Safety LtdWheatley Hall Road, Doncaster, South Yorkshire DN2 4NB, United KingdomTel: +44 (0)1302 303397 • Fax: +44 (0)1302 303251Website: www.cooper-Is.comCertificate No: 714j to EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005Certificated ProductsLPCB Ref.No.CASB383 Addressable Type A Wall Sounder/Beacon with short circuit isolator 714j/01Notes:1. Meets the requirements of EN54-3: 2001 for the following tones:- Continuous 984Hz- Pulsed 984 / 0Hz pulse 1Hz- Two Tone 644 / 984Hz @ 1 Hz cycle- Slow whoop 500-1200Hz in 3.5 seconds / 0.5secs gap2. The beacon functionality is not included within the scope of this approvalMASB860 Addressable Type A Wall Sounder/Beacon with short circuit isolator 714j/01Notes:1. Meets the requirements of EN54-3: 2001 for the following tones:- Continuous 984Hz- Pulsed 984 / 0Hz pulse 1Hz- Two Tone 644 / 984Hz @ 1 Hz cycle- Slow whoop 500-1200Hz in 3.5 seconds / 0.5secs gap2. The beacon functionality is not included within the scope of this approvalFXN539LPS Addressable Type A Wall Sounder/Beacon with short circuit isolator 714j/01Notes:1. Meets the requirements of EN54-3: 2001 for the following tones:- Continuous 984Hz- Pulsed 984 / 0Hz pulse 1Hz- Two Tone 644 / 984Hz @ 1 Hz cycle18 Jan 2014 391

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsLPCB Ref.No.- Slow whoop 500-1200Hz in 3.5 seconds / 0.5secs gap2. The beacon functionality is not included within the scope of this approvalCASB383WP Addressable Type B Wall Sounder/Beacon with short circuit isolator 714j/02Notes:1. Meets the requirements of EN54-3: 2001 for the following tones:- Continuous 984Hz- Pulsed 984 / 0Hz pulse 1Hz- Two Tone 644 / 984Hz @ 1 Hz cycle- Slow whoop 500-1200Hz in 3.5 seconds / 0.5secs gap2. The beacon functionality is not included within the scope of this approvalMASB860WP Addressable Type B Wall Sounder/Beacon with short circuit isolator 714j/02Notes:1. Meets the requirements of EN54-3: 2001 for the following tones:- Continuous 984Hz- Pulsed 984 / 0Hz pulse 1Hz- Two Tone 644 / 984Hz @ 1 Hz cycle- Slow whoop 500-1200Hz in 3.5 seconds / 0.5secs gap2. The beacon functionality is not included within the scope of this approvalFXN539LPSWP Addressable Type B Wall Sounder/Beacon with short circuit isolator 714j/02Notes:1. Meets the requirements of EN54-3: 2001 for the following tones:- Continuous 984Hz- Pulsed 984 / 0Hz pulse 1Hz- Two Tone 644 / 984Hz @ 1 Hz cycle- Slow whoop 500-1200Hz in 3.5 seconds / 0.5secs gap2. The beacon functionality is not included within the scope of this approvalCASBB384 Addressable Type A Sounder/Beacon Base with short circuit isolator 714j/03Notes:1. Meets the requirements of EN54-3: 2001 for the following tones:- Continuous 910Hz- Pulsed 910 / 0Hz pulse 1Hz- Two Tone 610 / 910Hz @ 1 Hz cycle- Slow whoop 500-1200Hz in 3.5 seconds / 0.5secs gap2. The beacon functionality is not included within the scope of this approvalMASB870 Addressable Type A Sounder/Beacon Base with short circuit isolator 714j/03Notes:1. Meets the requirements of EN54-3: 2001 for the following tones:- Continuous 910Hz- Pulsed 910 / 0Hz pulse 1Hz- Two Tone 610 / 910Hz @ 1 Hz cycle- Slow whoop 500-1200Hz in 3.5 seconds / 0.5secs gap2. The beacon functionality is not included within the scope of this approvalFXN537 Addressable Type A Sounder/Beacon Base with short circuit isolator 714j/03Notes:1. Meets the requirements of EN54-3: 2001 for the following tones:- Continuous 910Hz- Pulsed 910 / 0Hz pulse 1Hz- Two Tone 610 / 910Hz @ 1 Hz cycle- Slow whoop 500-1200Hz in 3.5 seconds / 0.5secs gap2. The beacon functionality is not included within the scope of this approvalCAS380 Addressable Type A Sounder Base with short circuit isolator 714j/04Note:1. Meets the requirements of EN54-3: 2001 for the following tones:- Continuous 910Hz- Pulsed 910 / 0Hz pulse 1Hz- Two Tone 610 / 910Hz @ 1 Hz cycle- Slow whoop 500-1200Hz in 3.5 seconds / 0.5secs gapMAS850 Addressable Type A Sounder Base with short circuit isolator 714j/04Note:1. Meets the requirements of EN54-3: 2001 for the following tones:- Continuous 910Hz- Pulsed 910 / 0Hz pulse 1Hz- Two Tone 610 / 910Hz @ 1 Hz cycle- Slow whoop 500-1200Hz in 3.5 seconds / 0.5secs gapFXN538 Addressable Type A Sounder Base with short circuit isolator 714j/04Note:1. Meets the requirements of EN54-3: 2001 for the following tones:- Continuous 910Hz- Pulsed 910 / 0Hz pulse 1Hz- Two Tone 610 / 910Hz @ 1 Hz cycle- Slow whoop 500-1200Hz in 3.5 seconds / 0.5secs gapCAS381 Addressable Type A Wall Sounder with short circuit isolator 714j/05392 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsLPCB Ref.No.Note:1. Meets the requirements of EN54-3: 2001 for the following tones:- Continuous 984Hz- Pulsed 984 / 0Hz pulse 1Hz- Two Tone 644 / 984Hz @ 1 Hz cycle- Slow whoop 500-1200Hz in 3.5 seconds / 0.5secs gapMAS850LPS Addressable Type A Wall Sounder with short circuit isolator 714j/05Note:1. Meets the requirements of EN54-3: 2001 for the following tones:- Continuous 984Hz- Pulsed 984 / 0Hz pulse 1Hz- Two Tone 644 / 984Hz @ 1 Hz cycle- Slow whoop 500-1200Hz in 3.5 seconds / 0.5secs gapFXN538LPS Addressable Type A Wall Sounder with short circuit isolator 714j/05Note:1. Meets the requirements of EN54-3: 2001 for the following tones:- Continuous 984Hz- Pulsed 984 / 0Hz pulse 1Hz- Two Tone 644 / 984Hz @ 1 Hz cycle- Slow whoop 500-1200Hz in 3.5 seconds / 0.5secs gapCAS381WP Addressable Type B Wall Sounder with short circuit isolator 714j/06Note:1. Meets the requirements of EN54-3: 2001 for the following tones:- Continuous 984Hz- Pulsed 984 / 0Hz pulse 1Hz- Two Tone 644 / 984Hz @ 1 Hz cycle- Slow whoop 500-1200Hz in 3.5 seconds / 0.5secs gapMAS850LPSWP Addressable Type B Wall Sounder with short circuit isolator 714j/06Note:1. Meets the requirements of EN54-3: 2001 for the following tones:- Continuous 984Hz- Pulsed 984 / 0Hz pulse 1Hz- Two Tone 644 / 984Hz @ 1 Hz cycle- Slow whoop 500-1200Hz in 3.5 seconds / 0.5secs gapFXN538LPSWP Addressable Type B Wall Sounder with short circuit isolator 714j/06Note:1. Meets the requirements of EN54-3: 2001 for the following tones:- Continuous 984Hz- Pulsed 984 / 0Hz pulse 1Hz- Two Tone 644 / 984Hz @ 1 Hz cycle- Slow whoop 500-1200Hz in 3.5 seconds / 0.5secs gapCooper MEDC LtdUnit B, Sutton Parkway, Oddicroft Lane, Sutton-in-Ashfield NG17 5FB, United KingdomTel: 01773 812249 • Fax: 01773 580282E-mail: brian.taylor@cooperindustries.comCertificate No: 1120b to EN54-23: 2010Visual Warning DevicesCertificated ProductsXB15 (White)Conventional Visual Alarm Device Type B (white light)LPCB Ref.No.1120b/01XB15 (Red)1) The VAD does not contain a function for synchronicity between devices.2) The VAD is rated as C-3-32, C-6-31, C-9-12 and W-8-13.3) The VAD must only be used with the clear lens and is only approved for the 24Vd.c. version, at 1Hz flash rate and must not be used with a lens guard.4) When used as a wall mounted VAD the device must be installed in accordance withthe guidance given in TM246.Conventional Visual Alarm Device Type B (red light)1) The VAD does not contain a function for synchronicity between devices.2) The VAD is rated as C-3-16, C-6-6 and W-3-5.3) The VAD must only be used with the red lens and is only approved for the 24V d.c.1120b/0218 Jan 2014 393

PART 1: SECTION 7ALARM WARNING DEVICESCertificated Productsversion, at 1Hz flash rate and must not be used with a lens guard.4) When used as a wall mounted VAD the device must be installed in accordance withthe guidance given in TM246.LPCB Ref.No.Certificate No: 1120a to EN 54-3: 2001 + A1: 2002 + A2: 2006Audible Warning DevicesCertificated ProductsDB3Conventional Sounder Type BNotes:1. Meets the requirements of EN54-3: 2001 for the following tones:Tone 3 - Sweeping 800 / 1000Hz at 1HzTone 7 - Slow whoop 500-1200Hz in 3.5 seconds / 0.5secs gapTone 8 - Sweep 1200-500Hz at 1HzTone 15 - 554Hz for 100ms / 440Hz for 400msTone 19 - Continuous at 660HzTone 20 - Alt 554 / 440Hz at 1HzLPCB Ref.No.1120a/01Cranford Controls LimitedUnit 2, Waterbrook Estate, Waterbrook Road, Alton, Hampshire GU34 2UD, United KingdomTel: +44 (0)1420 592444 • Fax: +44 (0)1420 592445E-mail: sales@cranfordcontrols.com • Website: www.cranfordcontrols.comCertificate No: 546a to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificated ProductsLPCB Ref.No.VTG-32E-SB Conventional indoor Type A sounder 546a/01Notes:1) The sounder is approved in red and white colours (-R and -W suffixes)2) Certified to EN54-3: 2001 with the following selectable tones:1 - LF Sweep frequency (800-1000Hz in 0.5sec)25 - German DIN tone Sweep (1200-500Hz @ 1Hz)27 - French tone AFNOR (554Hz for 100ms and 440Hz for 400ms)2 nd Stage tone for all above (800Hz continuous tone)11 - 2 nd Stage, Dutch sweep tone (500-1200Hz for 3.5s on, 0.5s off)VTG-32E-DB Conventional outdoor Type B sounder 546a/01Notes:1) The sounder is approved in red and white colours (-R and -W suffixes)2) Certified to EN54-3: 2001 with the following selectable tones:1 - LF Sweep frequency (800-1000Hz in 0.5sec)25 - German DIN tone Sweep (1200-500Hz @ 1Hz)27 - French tone AFNOR (554Hz for 100ms and 440Hz for 400ms)2 nd Stage tone for all above (800Hz continuous tone)11 - 2 nd Stage, Dutch sweep tone (500-1200Hz for 3.5s on, 0.5s off)VPR-DTConventional outdoor Type B sounder546a/02(116-100 mounting base)Notes:1) Certified to EN54-3: 2001 with the following selectable tones:1 - Evacuate Tone (500-1200Hz Rising Sweep over 3.5 Sec 0.5 Sec off)2 - Alert Tone (970Hz Continuous Tone)2) Certified at Maximum Volume only.VSO-32E Conventional indoor Type A sounder base 546a/04Notes:1) Also approved in Off-white, Ivory and Alternative white (-O, -I, and -A suffixes)2) Meets the requirements of EN 54-3 at the following tone settings on low, medium andhigh volume settings:1 - LF Sweep (Cranford sweep) (800-1000Hz @ 0.5 Sec)3 - Alternative Warble (800-1000Hz @ 0.5 Sec)11 - Dutch Sweep Tone (970Hz Cont)25 - German DIN Tone (Sweep 1200-500Hz @ 1Hz)27- French Tone AFNOR (554Hz 100ms and 440Hz for 400 ms)3) Cover plate (Part No. 116-099) must be used .394 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESBase:116-100 Viper Mounting BaseEmirates Fire Fighting Equipment Factory L.L.C. (FIREX)P.O.Box 22436, Industrial Area 13, Sharjah, United Arab EmiratesTel: +971 6 5340300 • Fax: +971 6 5340090E-mail: firex@emirates.net.ae • Website: www.firexuae.comCertificate No: 506e to EN 54-3: 2001Certificated ProductsLPCB Ref.No.FX-0218 Conventional fire alarm bell 506e/01Emirates Fire Protections Equip. Factory. TR. SectionBehind the Fourth Industrial Estate, Industrial Area 3, UAE PO 22436, Sharjah, United Arab EmiratesTel: 00971 653 40300 • Fax: 00971 653 40090E-mail: QC@firexuae.com • Website: www.firexuae.comCertificate No: 548e-(cl-3) to EN 54-3: 2001 + A1: 2002 + A2: 2006Audible Warning DevicesCertificated ProductsLPCB Ref.No.FX9403 Conventional sounder strobe (Shallow Base and FX94DB Base) 548e/01Notes:1. Meets the requirements of EN 54-3: 2001 at the following tones:Tone 01 2800Hz 0.34s off/0.4s on Tone 02 2400Hz -2900Hz @3Hz3. The strobe function is not in the scope of this approval.FX9403I Intelligent sounder strobe (Shallow Base and FX94DB Base) 548e/02Notes:1. Meets the requirements of EN 54-3: 2001 at the following tones:Tone 14 2400Hz - 2900Hz @ 3HzTone 16 500HZ - 1200Hz, 3.75s on / 0.25s offPre Alarm 800Hz, 1s on / 1s off2. Approved in both normal and power saving mode3. The visual alarm function is not in the scope of this approval4. Approved with single address and dual address (pre-alarm and main alarm).BasesShallow BaseFX94DB Deep baseEurotech Fire Systems Limited19/20 Stratfield Park, Elettra Avenue, Waterlooville, Hampshire PO7 7XN, United KingdomTel: +44 (0)203 141 0999 • Fax: +44 (0)239 225 2554E-mail: enquiry@eurotechfire.com • Website: www.eurotechfire.comCertificate No: 546a-(cl-1) to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificated ProductsLPCB Ref.No.EVTG-32E-SB Conventional indoor Type A sounder 546a/01Notes:1) Approved in red and white colours (-R and -W suffixes)2) Meets the requirements of EN 54-3 at the following tone settings:1 - LF Sweep frequency (800-1000Hz in 0.5sec)18 Jan 2014 395

PART 1: SECTION 7ALARM WARNING DEVICESCertificated Products25 - German DIN tone Sweep (1200-500Hz @ 1Hz)27 - French tone AFNOR (554Hz for 100ms and 440Hz for 400ms)LPCB Ref.No.2 nd Stage tone for all above (800Hz continuous tone)11 - 2 nd Stage, Dutch sweep tone (500-1200Hz for 3.5s on, 0.5s off)EVTG-32E-DB Conventional outdoor Type B sounder 546a/01Notes:1) Approved in red and white colours (-R and -W suffixes)2) Meets the requirements of EN 54-3 at the following tone settings:1 - LF Sweep frequency (800-1000Hz in 0.5sec)25 - German DIN tone Sweep (1200-500Hz @ 1Hz)27 - French tone AFNOR (554Hz for 100ms and 440Hz for 400ms)2nd Stage tone for all above (800Hz continuous tone)11 - 2ndStage, Dutch sweep tone (500-1200Hz for 3.5s on, 0.5s off)EVSO-32E Conventional indoor Type A sounder base 546a/04Notes:1) Approved in standard white and Eurotech white colours(-W and -EW suffixes).2) Meets the requirements of EN 54-3 at the following tone settings on low,medium and high volume settings:1 - LF Sweep (Eurotech sweep) (800-1000Hz @ 0.5 Sec)3 - Alternative Warble (800-1000Hz @ 0.5 Sec)11 - Dutch Sweep Tone (970Hz Cont)25 - German DIN Tone (Sweep 1200-500Hz @ 1Hz)27- French Tone AFNOR (554Hz 100ms and 440Hz for 400 ms)3) Cover plate (Part No. 116-099) must be used.Fike Safety Technology LtdUnit 31, Springvale Industrial Estate, Cwmbran, Gwent NP44 5BD, United KingdomTel: +44 (0)1633 865558 • Fax: +44 (0)1633 866656E-mail: fstinfo@fike.com • Website: www.fikesafetytechnology.co.ukCertificate No: 331h to EN 54-3: 2000 + A1: 2002 + A2: 2006Certificate No: 331j to EN 54-3: 2000 + A1: 2002 + A2: 2006 and EN 54-17: 2005Certificated ProductsLPCB Ref.No.302-000x Twinflex Hatari Conventional Type A sounder 331h/01Notes:1. Key:x = 1 Colour Redx = 2 Colour White.2. Meets the requirements of EN 54-3 at the following tones: -Dual Tone 970Hz 0.25s, 800Hz 0.25s.302-0012 Twinflex Flashpoint Conventional Type A sounder/strobe 331h/02Note:1 . Meets the requirements of EN 54-3 at the following tones: -Dual Tone 970Hz 0.25s, 800Hz 0.25sSlow Whoop 500-1200Hz over 3s, 0.5s offDual French 550Hz 0.1s, 440Hz 400ms.302-0022 Twinflex Flashpoint Conventional Type A sounder/strobe (domed) 331h/03Note:1 . Meets the requirements of EN 54-3 at the following tones: -Dual Tone 970Hz 0.25s, 800Hz 0.25sSlow Whoop 500-1200Hz over 3s, 0.5s offDual French 550Hz 0.1s, 440Hz 400ms.302-0004 Twinflex Hipoint Conventional Type B sounder 331h/04Note:1 . Meets the requirements of EN 54-3 at the following tones: -Dual Tone 970Hz 0.25s, 800Hz 0.25sSlow Whoop 500-1200Hz over 3s, 0.5s offDual French 550Hz 0.1s, 440Hz 400ms.313-002x Twinflex Soundpoint Conventional Type A sounder 331h/05Notes:1. Key:396 18 Jan 2014

Certificated Productsx = 1 Colour Redx = 2 Colour White.2. Meets the requirements of EN 54-3 at the following tones: -Dual Tone 970Hz 0.25s, 800Hz 0.25sSlow Whoop 500-1200Hz over 3s, 0.5s offDual French 550Hz 0.1s, 440Hz 400ms326-0001 Sita Analogue Addressable Type A sounder with low profile base and short circuitisolator.PART 1: SECTION 7ALARM WARNING DEVICESLPCB Ref.No.331j/01Note:1. Meets the requirements of EN 54-3 at the following tones: -Continuous 970HzPulsed 970Hz 1s on, 1s offDual Tone 970Hz 0.25s, 800Hz 0.25sSweep Up 800-970Hz over 1sSlow Whoop 500-1200Hz over 3s, 0.5s offSweep Down 1200-500Hz over 1sDual French 550Hz 0.1s, 440Hz 400ms.326-0003 Sita Analogue Addressable Type A sounder with deep base and short circuit isolator. 331j/02Note:1. Meets the requirements of EN 54-3 at the following tones: -Continuous 970HzPulsed 970Hz 1s on, 1s offDual Tone 970Hz 0.25s, 800Hz 0.25sSweep Up 800-970Hz over 1sSlow Whoop 500-1200Hz over 3s, 0.5s offSweep Down 1200-500Hz over 1sDual French 550Hz 0.1s, 440Hz 400ms.326-0021-RSita Analogue Addressable Type A sounder/strobe with low profile base and short circuitisolator.Note:1. Meets the requirements of EN 54-3 at the following tones: -Continuous 970HzPulsed 970Hz 1s on, 1s offDual Tone 970Hz 0.25s, 800Hz 0.25sSweep Up 800-970Hz over 1sSlow Whoop 500-1200Hz over 3s, 0.5s offSweep Down 1200-500Hz over 1sDual French 550Hz 0.1s, 440Hz 400ms.331j/03326-0023-RSita Analogue Addressable Type A sounder/strobe with deep base and short circuit 331j/04isolator.Note:1. Meets the requirements of EN 54-3 at the following tones: -Continuous 970HzPulsed 970Hz 1s on, 1s offDual Tone 970Hz 0.25s, 800Hz 0.25sSweep Up 800-970Hz over 1sSlow Whoop 500-1200Hz over 3s, 0.5s offSweep Down 1200-500Hz over 1sDual French 550Hz 0.1s, 440Hz 400ms.323-0001 Sita Hipoint Analogue Addressable Type B sounder with short circuit isolator. 331j/05Note:1. Meets the requirements of EN 54-3 at the following tones: -Continuous 970HzPulsed 970Hz 1s on, 1s offDual Tone 970Hz 0.25s, 800Hz 0.25sSweep Up 800-970Hz over 1sSlow Whoop 500-1200Hz over 3s, 0.5s offSweep Down 1200-500Hz over 1sDual French 550Hz 0.1s, 440Hz 400ms.313-000x Sita Soundpoint Analogue Addressable Type A sounder with short circuit isolator. 331j/06Notes:1. Key:x = 1 Colour Redx = 2 Colour White.2. Meets the requirements of EN 54-3 at the following tones: -Continuous 970HzPulsed 970Hz 1s on, 1s offDual Tone 970Hz 0.25s, 800Hz 0.25sSweep Up 800-970Hz over 1sSlow Whoop 500-1200Hz over 3s, 0.5s offSweep Down 1200-500Hz over 1sDual French 550Hz 0.1s, 440Hz 400ms.18 Jan 2014 397

PART 1: SECTION 7ALARM WARNING DEVICESFinder Elektronik A.S.Liman Mah., 6. Sok., No: 10 07070, Konyaalti, Antalya, TurkeyTel: +9 0242 344 2500 • Fax: +9 0242 344 2120E-mail: finder@finder.com.tr • Website: www.finder.com.trCertificate No: 928g-(cl-1) to 54-3: 2001 + A1: 2002 and EN 54 -17: 2005Certificate No: 546a-(cl-2) to EN 54-3: 2001 + A1: 2002 + A2: 2006Audible Warning DevicesCertificated ProductsFF LS200Analogue addressable Type A sounder with short circuit isolatorNotes1. Meets the requirements of EN 54-3 at the following tone settings:Dual tone 990 to 650Hz, 2Hz (250ms-250ms)Pulsed tone 990Hz, 1Hz (500ms ON 500ms OFFContinuous tone 990Hz, steadyLPCB Ref.No.928g/01FF ES150-VTG-SB Conventional indoor Type A sounder (SB base) 546a/01Notes:1. The sounder is approved in red and white colours (-R and -W suffixes)2. Certified to EN54-3: 2001 with the following selectable tones:1 - LF Sweep frequency (800-1000Hz in 0.5sec)25 - German DIN tone Sweep (1200-500Hz @ 1Hz)27 - French tone AFNOR (554Hz for 100ms and 440Hz for 400ms)2 nd Stage tone for all above (800Hz continuous tone)11 - 2 nd Stage, Dutch sweep tone (500-1200Hz for 3.5s on, 0.5s off)FF ES150-VTG-DB Conventional outdoor Type B sounder (DB base) 546a/01Notes:1. The sounder is approved in red and white colours (-R and -W suffixes)2. Certified to EN54-3: 2001 with the following selectable tones:1 - LF Sweep frequency (800-1000Hz in 0.5sec)25 - German DIN tone Sweep (1200-500Hz @ 1Hz)27 - French tone AFNOR (554Hz for 100ms and 440Hz for 400ms)2 nd Stage tone for all above (800Hz continuous tone)11 - 2 nd Stage, Dutch sweep tone (500-1200Hz for 3.5s on, 0.5s off)Bases:SB : Shallow base (type A)DB : Deep base (type B)Fireguard Safety Equipment Co Ltd2nd Floor, 145-147 St John Street, London EC1V 4PY, United KingdomTel: +44 (0)8450 751042 • Fax: +44 (0)845 2991039E-mail: info@fireguard-uk.com • Website: www.fireguard-uk.comCertificate No: 506e-(cl-1) to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificated ProductsLPCB Ref.No.FG-0218 Conventional fire alarm bell 506e/01FG-03127S Conventional Type B Electronic Sounder (FG -03127MB) 506e/02Note:Meets the requirements of EN54-3: 2001 at the following tones:1-AlternatingTones 800/970Hz at 2Hz2-Sweeping 800/970Hz at 7HzFG-03127BS Conventional Type B Electronic Sounder Beacon (FG -03127MB) 506e/03Notes:1 Meets the requirements of EN54-3: 2001 at the following tones:1-AlternatingTones 800/970Hz at 2Hz2-Sweeping 800/970Hz at 7Hz2 . The beacon functionality is not included within the scope of approval.398 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESBase:FG-03127MBGent By Honeywell (Novar Systems Ltd)140 Waterside Road, Hamilton Industrial Park, Leicester LE5 1TN, United KingdomTel: +44 (0)116 246 2000 • Fax: +44 (0)116 246 2300E-mail: gent_enquiry@gent.co.uk • Website: www.gent.co.ukCertificate No: 042bj to EN 54-3: 2001 + A1: 2002 + A2: 2006, EN 54-17: 2005Certificate No: 042bk to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificated ProductsLPCB Ref.No.S3-SN-R-V2 Analogue Addressable Red LP Indoor Sounder with short circuit isolator 042bj/01Note:1. Meets the requirements of EN 54-3:2001 at tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.S3-SN-W-V2 Analogue Addressable White LP Indoor Sounder with short circuit isolator 042bj/02Note:1. Meets the requirements of EN 54-3:2001 at tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.S3IP-SN-R-V2 Analogue Addressable Red Outdoor Sounder with short circuit isolator 042bj/03Note:1. Meets the requirements of EN 54-3:2001 at tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.S3IP-SN-W-V2 Analogue Addressable White Outdoor Sounder with short circuit isolator 042bj/04Note:1. Meets the requirements of EN 54-3:2001 at tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.S2IP-SN-R-V2 Analogue Addressable Red Outdoor Sounder with short circuit isolator 042bj/05Note:1. Meets the requirements of EN 54-3:2001 at tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.S2IP-SN-R-V2 Analogue Addressable Red Outdoor Sounder with short circuit isolator 042bj/05Note:1. Meets the requirements of EN 54-3:2001 at tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.S2IP-SN-W-V2 Analogue Addressable White Outdoor Sounder with short circuit isolator 042bj/06Note:1. Meets the requirements of EN 54-3:2001 at tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.S3-SN-ST-RR-V2Analogue Addressable Red LP Indoor Sounder/Strobe Red Lens with short circuit 042bj/07isolatorNotes:1. Meets the requirements of EN 54-3:2001 at tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.2. Certification excludes strobe function.S3-SN-ST-WR-V2Analogue Addressable White LP Indoor Sounder/Strobe Red Lens with short circuit 042bj/08isolatorNotes:1. Meets the requirements of EN 54-3:2001 at tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.18 Jan 2014 399

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsLPCB Ref.No.6. Continuous 970 Hz.2. Certification excludes strobe function.S3IP-SN-ST-RR-V2 Analogue Addressable Red Outdoor Sounder/Strobe Red Lens with short circuit isolator 042bj/09Notes:1. Meets the requirements of EN 54-3:2001 at tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.2. Certification excludes strobe function.S3IP-SN-ST-WR-V2 Analogue Addressable White Outdoor LP Sounder/Strobe Red Lens with short circuit 042bj/10isolatorNotes:1. Meets the requirements of EN 54-3:2001 at tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.2. Certification excludes strobe function.S3IP-SN-ST-RW-V2 Analogue Addressable Red Outdoor Sounder/Strobe White Lens with short circuit 042bj/11isolatorNotes:1. Meets the requirements of EN 54-3:2001 at tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.2. Certification excludes strobe function.S2IP-VP-RAnalogue Addressable Red Outdoor System Voice Enhanced Sounder with short circuit 042bj/12isolatorNotes:1. Meets the requirements of EN 54-3:2001 at tones:1. Intermittent tone 970 Hz @ 1Hz.3. Alternating tone 800/970 Hz @ 2Hz.6. Continuous 970 Hz.2. Certification excludes voice function.S3-VP-R Analogue Addressable Red LP Indoor Sounder Voice Enhanced with short circuit isolator 042bj/13Notes:1. Meets the requirements of EN 54-3:2001 at tones:1. Intermittent tone 970 Hz @ 1Hz.3. Alternating tone 800/970 Hz @ 2Hz.6. Continuous 970 Hz.2. Certification excludes voice function.S3-VP-WAnalogue Addressable White LP Indoor Sounder Voice Enhanced with short circuit 042bj/14isolatorNotes:1. Meets the requirements of EN 54-3:2001 at tones:1. Intermittent tone 970 Hz @ 1Hz.3. Alternating tone 800/970 Hz @ 2Hz.6. Continuous 970 Hz.2. Certification excludes voice function.S3-VP-ST-WRAnalogue Addressable White LP Indoor Sounder Voice Enhanced /Strobe Red Lens with 042bj/15short circuit isolatorNotes:1. Meets the requirements of EN 54-3:2001 at tones:1. Intermittent tone 970 Hz @ 1Hz.3. Alternating tone 800/970 Hz @ 2Hz.6. Continuous 970 Hz.2. Certification excludes voice and strobe function.S3-VP-ST-RRAnalogue Addressable Red LP Indoor Sounder Voice Enhanced /Strobe Red Lens with 042bj/16short circuit isolatorNotes:1. Meets the requirements of EN 54-3:2001 at tones:1. Intermittent tone 970 Hz @ 1Hz.3. Alternating tone 800/970 Hz @ 2Hz.6. Continuous 970 Hz.2. Certification excludes voice and strobe function.S3IP-VP-RAnalogue Addressable Red Outdoor LP Sounder Voice Enhanced with short circuit 042bj/17isolatorNotes:1. Meets the requirements of EN 54-3:2001 at tones:1. Intermittent tone 970 Hz @ 1Hz.3. Alternating tone 800/970 Hz @ 2Hz.6. Continuous 970 Hz.2. Certification excludes voice function.400 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsLPCB Ref.No.S3IP-VP-WAnalogue Addressable White Outdoor LP Sounder Voice Enhanced with short circuit 042bj/18isolatorNotes:1. Meets the requirements of EN 54-3:2001 at tones:1. Intermittent tone 970 Hz @ 1Hz.3. Alternating tone 800/970 Hz @ 2Hz.6. Continuous 970 Hz.2. Certification excludes voice function.S3IP-VP-ST-WRAnalogue Addressable White Outdoor LP Sounder Voice Enhanced / Strobe Red Lens 042bj/19with short circuit isolatorNotes:1. Meets the requirements of EN 54-3:2001 at tones:1. Intermittent tone 970 Hz @ 1Hz.3. Alternating tone 800/970 Hz @ 2Hz.6. Continuous 970 Hz.2. Certification excludes voice and strobe function.S3IP-VP-ST-RRAnalogue Addressable Red Outdoor LP Sounder Voice Enhanced / Strobe Red Lens 042bj/20with short circuit isolatorNotes:1. Meets the requirements of EN 54-3:2001 at tones:1. Intermittent tone 970 Hz @ 1Hz.3. Alternating tone 800/970 Hz @ 2Hz.6. Continuous 970 Hz.2. Certification excludes voice and strobe function.C3-SN-R Conventional Red LP Indoor Sounder 042bk/01Note:Meets the requirements of EN 54-3:2001 at Tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.C3-SN-W Conventional White LP Indoor Sounder 042bk/02Note:Meets the requirements of EN 54-3:2001 at Tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.C3IP-SN-R Conventional Red LP Outdoor Sounder 042bk/03Note:Meets the requirements of EN 54-3:2001 at Tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.C3IP-SN-W Conventional White LP Outdoor Sounder 042bk/04Note:Meets the requirements of EN 54-3:2001 at Tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.C3-SN-ST-RR Conventional Red LP Indoor Sounder/Strobe Red Lens 042bk/05Notes:1. Meets the requirements of EN 54-3:2001 at Tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.2. Certification excludes Strobe function.C3-SN-ST-WR Conventional White LP Indoor Sounder/Strobe Red Lens 042bk/06Notes:1. Meets the requirements of EN 54-3:2001 at Tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.2. Certification excludes Strobe function.C3IP-SN-ST-RR Conventional Red LP Outdoor Sounder/Strobe Red Lens 042bk/07Notes:1. Meets the requirements of EN 54-3:2001 at Tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.2. Certification excludes Strobe function.C3IP-SN-ST-WR Conventional White LP Outdoor Sounder/Strobe Red Lens 042bk/08Notes:18 Jan 2014 401

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsLPCB Ref.No.1. Meets the requirements of EN 54-3:2001 at Tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.2. Certification excludes Strobe function.C3-VP-ST-RR Conventional Red LP Indoor Sounder Voice Enhanced /Strobe Red Lens 042bk/09Notes:1. Meets the requirements of EN 54-3:2001 at Tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.2. Certification excludes Strobe function.C3-VP-ST-WR Conventional White LP Indoor Sounder Voice Enhanced /Strobe Red Lens 042bk/10Notes:1. Meets the requirements of EN 54-3:2001 at Tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.2. Certification excludes Strobe function.Bases:Shallow BaseDeep BaseNote - All products may be used with either baseGlobal Fire Equipment S.A.M.A.R.F. - Armazens F3 & F4, Sitio do Guelhim, Estoi, 8009-021 Faro, PortugalTel: +351 289 896 560E-mail: sales@globalfire.ptCertificate No: 506e-(cl-4) to EN 54-3: 2001 + A1: 2002 + A2: 2006Audible Warning DevicesCertificated ProductsLPCB Ref.No.GFE-BELL-6CS Conventional Fire Alarm Bell 506e/01Gulf Security Technology Co., Ltd.No 80 Changjiang East Road, QETDZ, Qinhuangdao, Hebei Province 066004, ChinaTel: +86 0335 8502434 • Fax: +86 0335 8502532E-mail: sales@fs.utc.com • Website: www.gst.com.cnCertificate No: 548e to EN 54-3: 2001 + A1: 2002 + A2: 2006Audible Warning DevicesCertificated ProductsLPCB Ref.No.C-9403 Conventional sounder strobe (Shallow Base and C-94DB Base) 548e/01Notes:1. Meets the requirements of EN 54-3: 2001 at the following tones:Tone 01 2800Hz 0.34s off/0.4s on Tone 02 2400Hz -2900Hz @3Hz2. The strobe function is not in the scope of this approval.I-9403 Intelligent sounder strobe (Shallow Base and C-94DB Base) 548e/02Notes:1. Meets the requirements of EN 54-3: 2001at the following tones:Tone 14 2400Hz - 2900Hz @ 3HzTone 16 500HZ - 1200Hz, 3.75s on / 0.25s offPre Alarm 800Hz, 1s on / 1s off2. Approved in both normal and power saving mode402 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated Products3. The visual alarm function is not in the scope of this approval4. Approved with single address and dual address (pre-alarm and main alarm).LPCB Ref.No.I-9406 Analogue Addressable Indoor sounder Beacon Base 548e/03Notes: (I-9102, I-9103 detectors and DZ-03 base)1) Meets the requirements of EN 54-3: 2001 at the following tones:Tone 14 2400Hz - 2900Hz @ 3HzTone 16 500HZ - 1200Hz, 3.75s on / 0.25s off2) The beacon functionality is not approved to EN54-234) Approved with P-9907 cover plate5) Approved with I-9103 heat detector and I-9102 smoke detectorBasesShallow BaseC-94DB Deep baseDZ-03 Standard baseHDRGrosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, United KingdomTel: +44 (0)1634 260133 • Fax: +44 (0)1634 260132E-mail: info@hochikieurope.com • Website: www.hochikieurope.comCertificate No: 164h to EN 54 3: 2001 + A1: 2002 + A2: 2006Certificated Products1460040 Intelligent analogue addressable Type A base sounder(1426010 and 1226110 bases)Notes:1) Meets the requirements of EN 54-3 at the following tones:1 - 925 Hz : 250 ms / 628 Hz : 250 ms2 - 925 Hz Continuous3 - 628 Hz Continuous4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms6 - 925 Hz : 150 ms / Off : 600 ms7 - 670 Hz : 250 ms / 845 Hz : 370 ms8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms9 - 1200 Hz : 500 ms / 500 Hz : 500 ms10 - 970 Hz : 500 ms / Off : 500 ms11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz)12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz)13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz)14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz)15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz)16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz)17 - ISO8201 : 970 Hz : 500 ms18 - ISO8201 : 2850 Hz : 500 ms19 - 800 Hz : 250 ms / 970 Hz : 250 ms20 - 2850 Hz Continuous21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms22 - 800 Hz : 500 ms / 970 Hz : 500 ms23 - 2850 Hz : 500 ms / Off : 500 ms24 - 925 Hz : 250 ms / Off : 1000 ms25 - 970 Hz Continuous26 - 660 Hz : 1800 ms / Off: 1800 ms27 - 660 Hz : 6500 ms / Off : 13000 ms28 - 660 Hz Continuous29 - 554 Hz : 500 ms / 440 Hz : 500 ms30 - 660 Hz : 500 ms / Off : 500 ms31 - 2850 Hz : 150 ms / Off : 100 ms32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz)33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz)34 - 988 Hz : 250 ms / 645 Hz : 250 ms35 - 510 Hz : 250 ms / 610 Hz : 250 ms36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz)37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz)LPCB Ref.No.164h/0118 Jan 2014 403

PART 1: SECTION 7ALARM WARNING DEVICESCertificated Products38 - 845 Hz Continuous39 - 970 Hz : 1000 ms / Off : 1000 ms40 - 800 Hz : 150 ms / 970 Hz : 150 ms41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz)42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz)43 - 2850 Hz : 1000 ms / Off : 1000 ms44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms46 - 440 Hz : 600 ms / Off : 600 ms47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms51 - Whoop 500-1200 3.5s/0.5s1460070 Intelligent analogue addressable Type A base sounder and beacon(1426010 and 1226110 bases)Notes1) The beacon function of this device is not included in the scope of this approval2) Meets the requirements of EN 54-3 at the following tones:1 - 925 Hz : 250 ms / 628 Hz : 250 ms2 - 925 Hz Continuous3 - 628 Hz Continuous4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms6 - 925 Hz : 150 ms / Off : 600 ms7 - 670 Hz : 250 ms / 845 Hz : 370 ms8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms9 - 1200 Hz : 500 ms / 500 Hz : 500 ms10 - 970 Hz : 500 ms / Off : 500 ms11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz)12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz)13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz)14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz)15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz)16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz)17 - ISO8201 : 970 Hz : 500 ms18 - ISO8201 : 2850 Hz : 500 ms19 - 800 Hz : 250 ms / 970 Hz : 250 ms20 - 2850 Hz Continuous21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms22 - 800 Hz : 500 ms / 970 Hz : 500 ms23 - 2850 Hz : 500 ms / Off : 500 ms24 - 925 Hz : 250 ms / Off : 1000 ms25 - 970 Hz Continuous26 - 660 Hz : 1800 ms / Off: 1800 ms27 - 660 Hz : 6500 ms / Off : 13000 ms28 - 660 Hz Continuous29 - 554 Hz : 500 ms / 440 Hz : 500 ms30 - 660 Hz : 500 ms / Off : 500 ms31 - 2850 Hz : 150 ms / Off : 100 ms32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz)33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz)34 - 988 Hz : 250 ms / 645 Hz : 250 ms35 - 510 Hz : 250 ms / 610 Hz : 250 ms36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz)37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz)38 - 845 Hz Continuous39 - 970 Hz : 1000 ms / Off : 1000 ms40 - 800 Hz : 150 ms / 970 Hz : 150 ms41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz)42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz)43 - 2850 Hz : 1000 ms / Off : 1000 ms44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms46 - 440 Hz : 600 ms / Off : 600 ms47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms51 - Whoop 500-1200 3.5s/0.5s1460050 Intelligent analogue addressable Type A wall sounder(1426010 and 1226110 bases)LPCB Ref.No.164h/03164h/02404 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsNotes:1) Meets the requirements of EN 54-3 at the following tones:H1 - 925/628 at 2HzH4 - French 554: 100ms / 440: 400msH5 - Swedish 660: 150ms / Off: 150ms8 - Whoop 500-1200 3s/0.5s12 - Sweep 800/970 at 1Hz15 - Sweep 2400-2850 at 1Hz17 - 970:ISO8201 0.5s18 - 2850:ISO820 0.5s1460090 Intelligent analogue addressable Type A wall sounder beacon(1426010 and 1226110 bases)Note:1 The beacon function of this device is not included in the scope of thisapproval2 Meets the requirements of EN 54-3 at the following tones:1 - 925 Hz : 250 ms / 628 Hz : 250 ms2 - 925 Hz Continuous3 - 628 Hz Continuous4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms6 - 925 Hz : 150 ms / Off : 600 ms7 - 670 Hz : 250 ms / 845 Hz : 370 ms8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms9 - 1200 Hz : 500 ms / 500 Hz : 500 ms10 - 970 Hz : 500 ms / Off : 500 ms11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz)12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz)13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz)14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz)15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz)16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz)17 - ISO8201 : 970 Hz : 500 ms18 - ISO8201 : 2850 Hz : 500 ms19 - 800 Hz : 250 ms / 970 Hz : 250 ms20 - 2850 Hz Continuous21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms22 - 800 Hz : 500 ms / 970 Hz : 500 ms23 - 2850 Hz : 500 ms / Off : 500 ms24 - 925 Hz : 250 ms / Off : 1000 ms25 - 970 Hz Continuous26 - 660 Hz : 1800 ms / Off: 1800 ms27 - 660 Hz : 6500 ms / Off : 13000 ms28 - 660 Hz ContinuousLPCB Ref.No.164h/0429 - 554 Hz : 500 ms / 440 Hz : 500 ms30 - 660 Hz : 500 ms / Off : 500 ms31 - 2850 Hz : 150 ms / Off : 100 ms32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz)33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz)34 - 988 Hz : 250 ms / 645 Hz : 250 ms35 - 510 Hz : 250 ms / 610 Hz : 250 ms36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz)37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz)38 - 845 Hz Continuous39 - 970 Hz : 1000 ms / Off : 1000 ms40 - 800 Hz : 150 ms / 970 Hz : 150 ms41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz)42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz)43 - 2850 Hz : 1000 ms / Off : 1000 ms44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms46 - 440 Hz : 600 ms / Off : 600 ms47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms51 - Whoop 500-1200 3.5s/0.5sBases:1226110 Isolator base18 Jan 2014 405

PART 1: SECTION 7ALARM WARNING DEVICES1426010 Standard BaseHochiki Europe (UK) LimitedGrosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, United KingdomTel: +44 (0)1634 260133 • Fax: +44 (0)1634 260132Website: www.hochikieurope.comCertificate No: 164h to EN 54 3: 2001 + A1: 2002 + A2: 2006Certificate No: 928q-(cl-6) to EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-25: 2008Certificated ProductsYBO-BS(HFP)YBO-BS(WHT)Intelligent analogue addressable Type A base sounder white version(YBN-R/3, YBO-R/SCI, YBN-R/3-SF-R/XXX(YY), YBO-R/3-SF-R/XXX(YY), YBO-R/SCI-SF-R/XXX(YY) and YBO-R/SCI-SF-S/XXX(FL) bases)Note:1) Meets the requirements of EN 54-3 at the following tones:1 - 925 Hz : 250 ms / 628 Hz : 250 ms2 - 925 Hz Continuous3 - 628 Hz Continuous4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms6 - 925 Hz : 150 ms / Off : 600 ms7 - 670 Hz : 250 ms / 845 Hz : 370 ms8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms9 - 1200 Hz : 500 ms / 500 Hz : 500 ms10 - 970 Hz : 500 ms / Off : 500 ms11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz)12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz)13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz)14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz)15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz)16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz)17 - ISO8201 : 970 Hz : 500 ms18 - ISO8201 : 2850 Hz : 500 ms19 - 800 Hz : 250 ms / 970 Hz : 250 ms20 - 2850 Hz Continuous21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms22 - 800 Hz : 500 ms / 970 Hz : 500 ms23 - 2850 Hz : 500 ms / Off : 500 ms24 - 925 Hz : 250 ms / Off : 1000 ms25 - 970 Hz Continuous26 - 660 Hz : 1800 ms / Off: 1800 ms27 - 660 Hz : 6500 ms / Off : 13000 ms28 - 660 Hz Continuous29 - 554 Hz : 500 ms / 440 Hz : 500 ms30 - 660 Hz : 500 ms / Off : 500 ms31 - 2850 Hz : 150 ms / Off : 100 ms32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz)33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz)34 - 988 Hz : 250 ms / 645 Hz : 250 ms35 - 510 Hz : 250 ms / 610 Hz : 250 ms36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz)37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz)38 - 845 Hz Continuous39 - 970 Hz : 1000 ms / Off : 1000 ms40 - 800 Hz : 150 ms / 970 Hz : 150 ms41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz)42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz)43 - 2850 Hz : 1000 ms / Off : 1000 ms44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms46 - 440 Hz : 600 ms / Off : 600 ms47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms51 - Whoop 500-1200 3.5s/0.5sIntelligent analogue addressable Type A base sounder white version(YBN-R/3, YBO-R/SCI, YBN-R/3-SF-R/XXX(YY), YBO-R/3-SF-R/XXX(YY), YBO-R/SCI-LPCB Ref.No.164h/01164h/01406 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsCHQ-WS2(HFP)SF-R/XXX(YY) and YBO-R/SCI-SF-S/XXX(FL) bases)Note:1) Meets the requirements of EN 54-3 at the following tones:1 - 925 Hz : 250 ms / 628 Hz : 250 ms2 - 925 Hz Continuous3 - 628 Hz Continuous4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms6 - 925 Hz : 150 ms / Off : 600 ms7 - 670 Hz : 250 ms / 845 Hz : 370 ms8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms9 - 1200 Hz : 500 ms / 500 Hz : 500 ms10 - 970 Hz : 500 ms / Off : 500 ms11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz)12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz)13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz)14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz)15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz)16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz)17 - ISO8201 : 970 Hz : 500 ms18 - ISO8201 : 2850 Hz : 500 ms19 - 800 Hz : 250 ms / 970 Hz : 250 ms20 - 2850 Hz Continuous21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms22 - 800 Hz : 500 ms / 970 Hz : 500 ms23 - 2850 Hz : 500 ms / Off : 500 ms24 - 925 Hz : 250 ms / Off : 1000 ms25 - 970 Hz Continuous26 - 660 Hz : 1800 ms / Off: 1800 ms27 - 660 Hz : 6500 ms / Off : 13000 ms28 - 660 Hz Continuous29 - 554 Hz : 500 ms / 440 Hz : 500 ms30 - 660 Hz : 500 ms / Off : 500 ms31 - 2850 Hz : 150 ms / Off : 100 ms32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz)33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz)34 - 988 Hz : 250 ms / 645 Hz : 250 ms35 - 510 Hz : 250 ms / 610 Hz : 250 ms36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz)37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz)38 - 845 Hz Continuous39 - 970 Hz : 1000 ms / Off : 1000 ms40 - 800 Hz : 150 ms / 970 Hz : 150 ms41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz)42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz)43 - 2850 Hz : 1000 ms / Off : 1000 ms44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms46 - 440 Hz : 600 ms / Off : 600 ms47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms51 - Whoop 500-1200 3.5s/0.5sIntelligent analogue addressable Type A wall sounder(YBN-R/3, YBO-R/SCI, YBN-R/3-SF-R/XXX(YY), YBO-R/3-SF-R/XXX(YY), YBO-R/SCI-SF-R/XXX(YY) and YBO-R/SCI-SF-S/XXX(FL) bases)Note:1) Meets the requirements of EN 54-3 at the following tones:1 - 925 Hz : 250 ms / 628 Hz : 250 ms2 - 925 Hz Continuous3 - 628 Hz Continuous4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms6 - 925 Hz : 150 ms / Off : 600 ms7 - 670 Hz : 250 ms / 845 Hz : 370 ms8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms9 - 1200 Hz : 500 ms / 500 Hz : 500 ms10 - 970 Hz : 500 ms / Off : 500 ms11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz)12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz)13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz)LPCB Ref.No.164h/0218 Jan 2014 407

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsCHQ-WS2(WHT)14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz)15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz)16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz)17 - ISO8201 : 970 Hz : 500 ms18 - ISO8201 : 2850 Hz : 500 ms19 - 800 Hz : 250 ms / 970 Hz : 250 ms20 - 2850 Hz Continuous21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms22 - 800 Hz : 500 ms / 970 Hz : 500 ms23 - 2850 Hz : 500 ms / Off : 500 ms24 - 925 Hz : 250 ms / Off : 1000 ms25 - 970 Hz Continuous26 - 660 Hz : 1800 ms / Off: 1800 ms27 - 660 Hz : 6500 ms / Off : 13000 ms28 - 660 Hz Continuous29 - 554 Hz : 500 ms / 440 Hz : 500 ms30 - 660 Hz : 500 ms / Off : 500 ms31 - 2850 Hz : 150 ms / Off : 100 ms32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz)33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz)34 - 988 Hz : 250 ms / 645 Hz : 250 ms35 - 510 Hz : 250 ms / 610 Hz : 250 ms36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz)37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz)38 - 845 Hz Continuous39 - 970 Hz : 1000 ms / Off : 1000 ms40 - 800 Hz : 150 ms / 970 Hz : 150 ms41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz)42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz)43 - 2850 Hz : 1000 ms / Off : 1000 ms44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms46 - 440 Hz : 600 ms / Off : 600 ms47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms51 - Whoop 500-1200 3.5s/0.5sIntelligent analogue addressable Type A wall sounder - white version(YBN-R/3, YBO-R/SCI, YBN-R/3-SF-R/XXX(YY), YBO-R/3-SF-R/XXX(YY), YBO-R/SCI-SF-R/XXX(YY) and YBO-R/SCI-SF-S/XXX(FL) bases)Note:1) Meets the requirements of EN 54-3 at the following tones:1 - 925 Hz : 250 ms / 628 Hz : 250 ms2 - 925 Hz Continuous3 - 628 Hz Continuous4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms6 - 925 Hz : 150 ms / Off : 600 ms7 - 670 Hz : 250 ms / 845 Hz : 370 ms8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms9 - 1200 Hz : 500 ms / 500 Hz : 500 ms10 - 970 Hz : 500 ms / Off : 500 ms11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz)12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz)13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz)14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz)15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz)16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz)17 - ISO8201 : 970 Hz : 500 ms18 - ISO8201 : 2850 Hz : 500 ms19 - 800 Hz : 250 ms / 970 Hz : 250 ms20 - 2850 Hz Continuous21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms22 - 800 Hz : 500 ms / 970 Hz : 500 ms23 - 2850 Hz : 500 ms / Off : 500 ms24 - 925 Hz : 250 ms / Off : 1000 ms25 - 970 Hz Continuous26 - 660 Hz : 1800 ms / Off: 1800 ms27 - 660 Hz : 6500 ms / Off : 13000 ms28 - 660 Hz Continuous29 - 554 Hz : 500 ms / 440 Hz : 500 msLPCB Ref.No.164h/02408 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsCHQ-WS2/W30 - 660 Hz : 500 ms / Off : 500 ms31 - 2850 Hz : 150 ms / Off : 100 ms32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz)33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz)34 - 988 Hz : 250 ms / 645 Hz : 250 ms35 - 510 Hz : 250 ms / 610 Hz : 250 ms36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz)37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz)38 - 845 Hz Continuous39 - 970 Hz : 1000 ms / Off : 1000 ms40 - 800 Hz : 150 ms / 970 Hz : 150 ms41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz)42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz)43 - 2850 Hz : 1000 ms / Off : 1000 ms44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms46 - 440 Hz : 600 ms / Off : 600 ms47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms51 - Whoop 500-1200 3.5s/0.5sIntelligent analogue addressable Type B wall sounder- weatherproof version(YBN-R/3, YBO-R/SCI, YBN-R/3-SF-R/XXX(YY), YBO-R/3-SF-R/XXX(YY), YBO-R/SCI-SF-R/XXX(YY) and YBO-R/SCI-SF-S/XXX(FL) bases)Note:1) Meets the requirements of EN 54-3 at the following tones:2) Includes a WS2-WPK weatherproofing kit1 - 925 Hz : 250 ms / 628 Hz : 250 ms2 - 925 Hz Continuous3 - 628 Hz Continuous4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms6 - 925 Hz : 150 ms / Off : 600 ms7 - 670 Hz : 250 ms / 845 Hz : 370 ms8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms9 - 1200 Hz : 500 ms / 500 Hz : 500 ms10 - 970 Hz : 500 ms / Off : 500 ms11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz)12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz)13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz)14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz)15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz)16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz)17 - ISO8201 : 970 Hz : 500 ms18 - ISO8201 : 2850 Hz : 500 ms19 - 800 Hz : 250 ms / 970 Hz : 250 ms20 - 2850 Hz Continuous21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms22 - 800 Hz : 500 ms / 970 Hz : 500 ms23 - 2850 Hz : 500 ms / Off : 500 ms24 - 925 Hz : 250 ms / Off : 1000 ms25 - 970 Hz Continuous26 - 660 Hz : 1800 ms / Off: 1800 ms27 - 660 Hz : 6500 ms / Off : 13000 ms28 - 660 Hz Continuous29 - 554 Hz : 500 ms / 440 Hz : 500 ms30 - 660 Hz : 500 ms / Off : 500 ms31 - 2850 Hz : 150 ms / Off : 100 ms32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz)33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz)34 - 988 Hz : 250 ms / 645 Hz : 250 ms35 - 510 Hz : 250 ms / 610 Hz : 250 ms36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz)37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz)38 - 845 Hz Continuous39 - 970 Hz : 1000 ms / Off : 1000 ms40 - 800 Hz : 150 ms / 970 Hz : 150 ms41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz)42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz)43 - 2850 Hz : 1000 ms / Off : 1000 msLPCB Ref.No.164h/0218 Jan 2014 409

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsYBO-BSB(HFP)YBO-BSB(WHT)44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms46 - 440 Hz : 600 ms / Off : 600 ms47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms51 - Whoop 500-1200 3.5s/0.5sIntelligent analogue addressable Type A base sounder and beacon white version(YBN-R/3, YBO-R/SCI, YBN-R/3-SF-R/XXX(YY), YBO-R/3-SF-R/XXX(YY), YBO-R/SCI-SF-R/XXX(YY) and YBO-R/SCI-SF-S/XXX(FL) bases)Notes:1) The beacon function of this device is not included in the scope of this approval2) Meets the requirements of EN 54-3 at the following tones:1 - 925 Hz : 250 ms / 628 Hz : 250 ms2 - 925 Hz Continuous3 - 628 Hz Continuous4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms6 - 925 Hz : 150 ms / Off : 600 ms7 - 670 Hz : 250 ms / 845 Hz : 370 ms8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms9 - 1200 Hz : 500 ms / 500 Hz : 500 ms10 - 970 Hz : 500 ms / Off : 500 ms11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz)12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz)13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz)14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz)15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz)16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz)17 - ISO8201 : 970 Hz : 500 ms18 - ISO8201 : 2850 Hz : 500 ms19 - 800 Hz : 250 ms / 970 Hz : 250 ms20 - 2850 Hz Continuous21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms22 - 800 Hz : 500 ms / 970 Hz : 500 ms23 - 2850 Hz : 500 ms / Off : 500 ms24 - 925 Hz : 250 ms / Off : 1000 ms25 - 970 Hz Continuous26 - 660 Hz : 1800 ms / Off: 1800 ms27 - 660 Hz : 6500 ms / Off : 13000 ms28 - 660 Hz Continuous29 - 554 Hz : 500 ms / 440 Hz : 500 ms30 - 660 Hz : 500 ms / Off : 500 ms31 - 2850 Hz : 150 ms / Off : 100 ms32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz)33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz)34 - 988 Hz : 250 ms / 645 Hz : 250 ms35 - 510 Hz : 250 ms / 610 Hz : 250 ms36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz)37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz)38 - 845 Hz Continuous39 - 970 Hz : 1000 ms / Off : 1000 ms40 - 800 Hz : 150 ms / 970 Hz : 150 ms41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz)42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz)43 - 2850 Hz : 1000 ms / Off : 1000 ms44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms46 - 440 Hz : 600 ms / Off : 600 ms47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms51 - Whoop 500-1200 3.5s/0.5sIntelligent analogue addressable Type A base sounder and beacon white version(YBN-R/3, YBO-R/SCI, YBN-R/3-SF-R/XXX(YY), YBO-R/3-SF-R/XXX(YY), YBO-R/SCI-SF-R/XXX(YY) and YBO-R/SCI-SF-S/XXX(FL) bases)Notes:1) The beacon function of this device is not included in the scope of this approval2) Meets the requirements of EN 54-3 at the following tones:1 - 925 Hz : 250 ms / 628 Hz : 250 msLPCB Ref.No.164h/03164h/03410 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsYBO-BS2 - 925 Hz Continuous3 - 628 Hz Continuous4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms6 - 925 Hz : 150 ms / Off : 600 ms7 - 670 Hz : 250 ms / 845 Hz : 370 ms8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms9 - 1200 Hz : 500 ms / 500 Hz : 500 ms10 - 970 Hz : 500 ms / Off : 500 ms11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz)12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz)13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz)14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz)15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz)16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz)17 - ISO8201 : 970 Hz : 500 ms18 - ISO8201 : 2850 Hz : 500 ms19 - 800 Hz : 250 ms / 970 Hz : 250 ms20 - 2850 Hz Continuous21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms22 - 800 Hz : 500 ms / 970 Hz : 500 ms23 - 2850 Hz : 500 ms / Off : 500 ms24 - 925 Hz : 250 ms / Off : 1000 ms25 - 970 Hz Continuous26 - 660 Hz : 1800 ms / Off: 1800 ms27 - 660 Hz : 6500 ms / Off : 13000 ms28 - 660 Hz Continuous29 - 554 Hz : 500 ms / 440 Hz : 500 ms30 - 660 Hz : 500 ms / Off : 500 ms31 - 2850 Hz : 150 ms / Off : 100 ms32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz)33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz)34 - 988 Hz : 250 ms / 645 Hz : 250 ms35 - 510 Hz : 250 ms / 610 Hz : 250 ms36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz)37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz)38 - 845 Hz Continuous39 - 970 Hz : 1000 ms / Off : 1000 ms40 - 800 Hz : 150 ms / 970 Hz : 150 ms41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz)42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz)43 - 2850 Hz : 1000 ms / Off : 1000 ms44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms46 - 440 Hz : 600 ms / Off : 600 ms47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms51 - Whoop 500-1200 3.5s/0.5sIntelligent analogue addressable Type A base sounder(YBN-R/3, YBO-R/SCI, YBN-R/3-SF-R/XXX(YY), YBO-R/3-SF-R/XXX(YY), YBO-R/SCI-SF-R/XXX(YY) and YBO-R/SCI-SF-S/XXX(FL) bases)Notes:1) Meets the requirements of EN 54-3 at the following tones:1 - 925 Hz : 250 ms / 628 Hz : 250 ms2 - 925 Hz Continuous3 - 628 Hz Continuous4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms6 - 925 Hz : 150 ms / Off : 600 ms7 - 670 Hz : 250 ms / 845 Hz : 370 ms8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms9 - 1200 Hz : 500 ms / 500 Hz : 500 ms10 - 970 Hz : 500 ms / Off : 500 ms11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz)12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz)13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz)14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz)15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz)16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz)17 - ISO8201 : 970 Hz : 500 msLPCB Ref.No.164h/0118 Jan 2014 411

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsYBO-BSB18 - ISO8201 : 2850 Hz : 500 ms19 - 800 Hz : 250 ms / 970 Hz : 250 ms20 - 2850 Hz Continuous21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms22 - 800 Hz : 500 ms / 970 Hz : 500 ms23 - 2850 Hz : 500 ms / Off : 500 ms24 - 925 Hz : 250 ms / Off : 1000 ms25 - 970 Hz Continuous26 - 660 Hz : 1800 ms / Off: 1800 ms27 - 660 Hz : 6500 ms / Off : 13000 ms28 - 660 Hz Continuous29 - 554 Hz : 500 ms / 440 Hz : 500 ms30 - 660 Hz : 500 ms / Off : 500 ms31 - 2850 Hz : 150 ms / Off : 100 ms32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz)33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz)34 - 988 Hz : 250 ms / 645 Hz : 250 ms35 - 510 Hz : 250 ms / 610 Hz : 250 ms36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz)37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz)38 - 845 Hz Continuous39 - 970 Hz : 1000 ms / Off : 1000 ms40 - 800 Hz : 150 ms / 970 Hz : 150 ms41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz)42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz)43 - 2850 Hz : 1000 ms / Off : 1000 ms44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms46 - 440 Hz : 600 ms / Off : 600 ms47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms51 - Whoop 500-1200 3.5s/0.5sIntelligent analogue addressable Type A base sounder and beacon(YBN-R/3, YBO-R/SCI, YBN-R/3-SF-R/XXX(YY), YBO-R/3-SF-R/XXX(YY), YBO-R/SCI-SF-R/XXX(YY) and YBO-R/SCI-SF-S/XXX(FL) bases)Notes:1) The beacon function of this device is not included in the scope of this approval2) Meets the requirements of EN 54-3 at the following tones:1 - 925 Hz : 250 ms / 628 Hz : 250 ms2 - 925 Hz Continuous3 - 628 Hz Continuous4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms6 - 925 Hz : 150 ms / Off : 600 ms7 - 670 Hz : 250 ms / 845 Hz : 370 ms8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms9 - 1200 Hz : 500 ms / 500 Hz : 500 ms10 - 970 Hz : 500 ms / Off : 500 ms11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz)12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz)13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz)14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz)15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz)16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz)17 - ISO8201 : 970 Hz : 500 ms18 - ISO8201 : 2850 Hz : 500 ms19 - 800 Hz : 250 ms / 970 Hz : 250 ms20 - 2850 Hz Continuous21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms22 - 800 Hz : 500 ms / 970 Hz : 500 ms23 - 2850 Hz : 500 ms / Off : 500 ms24 - 925 Hz : 250 ms / Off : 1000 ms25 - 970 Hz Continuous26 - 660 Hz : 1800 ms / Off: 1800 ms27 - 660 Hz : 6500 ms / Off : 13000 ms28 - 660 Hz Continuous29 - 554 Hz : 500 ms / 440 Hz : 500 ms30 - 660 Hz : 500 ms / Off : 500 ms31 - 2850 Hz : 150 ms / Off : 100 ms32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz)LPCB Ref.No.164h/03412 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsCHQ-WS233 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz)34 - 988 Hz : 250 ms / 645 Hz : 250 ms35 - 510 Hz : 250 ms / 610 Hz : 250 ms36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz)37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz)38 - 845 Hz Continuous39 - 970 Hz : 1000 ms / Off : 1000 ms40 - 800 Hz : 150 ms / 970 Hz : 150 ms41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz)42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz)43 - 2850 Hz : 1000 ms / Off : 1000 ms44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms46 - 440 Hz : 600 ms / Off : 600 ms47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms51 - Whoop 500-1200 3.5s/0.5sIntelligent analogue addressable Type A wall sounder(YBN-R/3, YBO-R/SCI, YBN-R/3-SF-R/XXX(YY), YBO-R/3-SF-R/XXX(YY), YBO-R/SCI-SF-R/XXX(YY) and YBO-R/SCI-SF-S/XXX(FL) bases)Note:1) Meets the requirements of EN 54-3 at the following tones:1 - 925 Hz : 250 ms / 628 Hz : 250 ms2 - 925 Hz Continuous3 - 628 Hz Continuous4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms6 - 925 Hz : 150 ms / Off : 600 ms7 - 670 Hz : 250 ms / 845 Hz : 370 ms8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms9 - 1200 Hz : 500 ms / 500 Hz : 500 ms10 - 970 Hz : 500 ms / Off : 500 ms11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz)12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz)13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz)14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz)15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz)16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz)17 - ISO8201 : 970 Hz : 500 ms18 - ISO8201 : 2850 Hz : 500 ms19 - 800 Hz : 250 ms / 970 Hz : 250 ms20 - 2850 Hz Continuous21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms22 - 800 Hz : 500 ms / 970 Hz : 500 ms23 - 2850 Hz : 500 ms / Off : 500 ms24 - 925 Hz : 250 ms / Off : 1000 ms25 - 970 Hz Continuous26 - 660 Hz : 1800 ms / Off: 1800 ms27 - 660 Hz : 6500 ms / Off : 13000 ms28 - 660 Hz Continuous29 - 554 Hz : 500 ms / 440 Hz : 500 ms30 - 660 Hz : 500 ms / Off : 500 ms31 - 2850 Hz : 150 ms / Off : 100 ms32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz)33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz)34 - 988 Hz : 250 ms / 645 Hz : 250 ms35 - 510 Hz : 250 ms / 610 Hz : 250 ms36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz)37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz)38 - 845 Hz Continuous39 - 970 Hz : 1000 ms / Off : 1000 ms40 - 800 Hz : 150 ms / 970 Hz : 150 ms41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz)42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz)43 - 2850 Hz : 1000 ms / Off : 1000 ms44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms46 - 440 Hz : 600 ms / Off : 600 ms47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 msLPCB Ref.No.164h/0218 Jan 2014 413

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsCHQ-WSBCHQ-WSB (WHT)49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms51 - Whoop 500-1200 3.5s/0.5sIntelligent analogue addressable Type A wall sounder beacon(YBN-R/3, YBO-R/SCI, YBN-R/3-SF-R/XXX(YY), YBO-R/3-SF-R/XXX(YY), YBO-R/SCI-SF-R/XXX(YY) and YBO-R/SCI-SF-S/XXX(FL) bases)Note:1. The beacon function of this device is not included in the scope of this approval2. Type B weatherproof when used with a WS2-WPK weatherproofing kit3. Meets the requirements of EN 54-3 at the following tones:1 - 925 Hz : 250 ms / 628 Hz : 250 ms2 - 925 Hz Continuous3 - 628 Hz Continuous4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms6 - 925 Hz : 150 ms / Off : 600 ms7 - 670 Hz : 250 ms / 845 Hz : 370 ms8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms9 - 1200 Hz : 500 ms / 500 Hz : 500 ms10 - 970 Hz : 500 ms / Off : 500 ms11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz)12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz)13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz)14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz)15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz)16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz)17 - ISO8201 : 970 Hz : 500 ms18 - ISO8201 : 2850 Hz : 500 ms19 - 800 Hz : 250 ms / 970 Hz : 250 ms20 - 2850 Hz Continuous21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms22 - 800 Hz : 500 ms / 970 Hz : 500 ms23 - 2850 Hz : 500 ms / Off : 500 ms24 - 925 Hz : 250 ms / Off : 1000 ms25 - 970 Hz Continuous26 - 660 Hz : 1800 ms / Off: 1800 ms27 - 660 Hz : 6500 ms / Off : 13000 ms28 - 660 Hz Continuous29 - 554 Hz : 500 ms / 440 Hz : 500 ms30 - 660 Hz : 500 ms / Off : 500 ms31 - 2850 Hz : 150 ms / Off : 100 ms32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz)33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz)34 - 988 Hz : 250 ms / 645 Hz : 250 ms35 - 510 Hz : 250 ms / 610 Hz : 250 ms36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz)37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz)38 - 845 Hz Continuous39 - 970 Hz : 1000 ms / Off : 1000 ms40 - 800 Hz : 150 ms / 970 Hz : 150 ms 41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9Hz)42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz)43 - 2850 Hz : 1000 ms / Off : 1000 ms44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms46 - 440 Hz : 600 ms / Off : 600 ms47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms51 - Whoop 500-1200 3.5s/0.5sIntelligent analogue addressable Type A wall sounder beacon(YBN-R/3, YBO-R/SCI, YBN-R/3-SF-R/XXX(YY), YBO-R/3-SF-R/XXX(YY), YBO-R/SCI-SF-R/XXX(YY) and YBO-R/SCI-SF-S/XXX(FL) bases)Note:1 The beacon function of this device is not included in the scope of this approval2 Meets the requirements of EN 54-3 at the following tones:3. Type B weatherproof when used with a WS2-WPK(WHT) weatherproofing kit1 - 925 Hz : 250 ms / 628 Hz : 250 msLPCB Ref.No.164h/04164h/04414 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsLPCB Ref.No.2 - 925 Hz Continuous3 - 628 Hz Continuous4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms6 - 925 Hz : 150 ms / Off : 600 ms7 - 670 Hz : 250 ms / 845 Hz : 370 ms8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms9 - 1200 Hz : 500 ms / 500 Hz : 500 ms10 - 970 Hz : 500 ms / Off : 500 ms11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz)12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz)13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz)14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz)15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz)16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz)17 - ISO8201 : 970 Hz : 500 ms18 - ISO8201 : 2850 Hz : 500 ms19 - 800 Hz : 250 ms / 970 Hz : 250 ms20 - 2850 Hz Continuous21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms22 - 800 Hz : 500 ms / 970 Hz : 500 ms23 - 2850 Hz : 500 ms / Off : 500 ms24 - 925 Hz : 250 ms / Off : 1000 ms25 - 970 Hz Continuous26 - 660 Hz : 1800 ms / Off: 1800 ms27 - 660 Hz : 6500 ms / Off : 13000 ms28 - 660 Hz Continuous29 - 554 Hz : 500 ms / 440 Hz : 500 ms30 - 660 Hz : 500 ms / Off : 500 ms31 - 2850 Hz : 150 ms / Off : 100 ms32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz)33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz)34 - 988 Hz : 250 ms / 645 Hz : 250 ms35 - 510 Hz : 250 ms / 610 Hz : 250 ms36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz)37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz)38 - 845 Hz Continuous39 - 970 Hz : 1000 ms / Off : 1000 ms40 - 800 Hz : 150 ms / 970 Hz : 150 ms41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz)42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz)43 - 2850 Hz : 1000 ms / Off : 1000 ms44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms46 - 440 Hz : 600 ms / Off : 600 ms47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms51 - Whoop 500-1200 3.5s/0.5sRSM-BS Wireless type A sounder base 928q/01Note:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 970Hz2. Warble 800/1000/1Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. Approved for use with ROD-E, RMD-E and RHD-E wireless detectors3. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryRSM-BSB Wireless type A audiovisual sounder base 928q/02Note:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 970Hz2. Warble 800/1000/1Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. Approved for use with ROD-E, RMD-E and RHD-E wireless detectors3. Does not incorporate approval to EN 54-234. The device must be used with the following batteries only:CR123A (3 Vdc) - main battery18 Jan 2014 415

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsLPCB Ref.No.CR123A (3 Vdc) - secondary batteryRSM-WS (RED) Wireless type A wall sounder 928q/03Note:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryRSM-WSB (RED) Wireless type A audiovisual wall sounder 928q/04Note:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. Does not incorporate approval to EN 54-233. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryRSM-WS (WHT) Wireless type A wall sounder white colour 928q/06Note:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryRSM-WSB (WHT) Wireless type A audiovisual wall sounder white colour 928q/07Note:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. Does not incorporate approval to EN 54-233. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryBases:YBN-R/3 Analogue mounting base (ivory and white)YBO-R/SCI Isolator baseDetectors:ROD-ERMD-ERHD-EWireless optical smoke detectorWireless multi-criteria detectorWireless heat detectorHoring LIH Industrial Co LtdNo. 17-6, Ai-Chien Road, Hu-Hsi Village, Yuan-Shan Hsiang (264), Ilan Hsien, Taiwan ROCTel: +886 2 22487599 • Fax: +886 2 22407752Certificate No: 506e to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificated ProductsLPCB Ref.No.AH-0218 Conventional fire alarm bell 506e/01AH-03127S Conventional Type B electronic sounder (AH-03127MB Base) 506e/02Note:Meets the requirements of EN54-3: 2001 at the following tones:1-Alternating Tones 800/970Hz at 2Hz2-Sweeping 800/970Hz at 7HzAH-03127-BS Conventional Type B electronic sounder beacon (AH-03127MB Base) 506e/03Notes:1. Meets the requirements of EN54-3: 2001 at the following tones:1-Alternating Tones 800/970Hz at 2Hz416 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated Products2-Sweeping 800/970Hz at 7Hz2. The beacon functionality is not included within the scope of approval.LPCB Ref.No.Base:AH-03127MBHosiden Besson LimitedSt Joseph's Close Trading Estate, St Joseph's Close, Hove, East Sussex BN3 7EZ, United KingdomTel: +44 (0)1273 860000 • Fax: +44 (0)1273 777501E-mail: info@hbl.co.uk • Website: www.hbl.co.ukCertificate No: 715a-(cl-1) to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificated ProductsLPCB Ref.No.Wafer MT Conventional 32 Tone Sounder 715a/04Notes:1) Suitable for Type A indoor application only2) Approved at 12 & 24 VDC3) Approved with body moulding colour variations4) To be used in conjunction with a suitable detector when supplied without cover5) Meets requirements of EN 54-3: 2001 with the following tones:Sound 2 Banshee LF Fast Sweep - 800Hz - 950Hz Swept @ 9HzSound 13 Banshee / Bedlam HF Fast Sweep - 2400Hz - 2900Hz @ 9HzSound 15 Banshee / Bedlam HF Continuous - Continuous 2900Hz @ 3HzSound 19 Slow Whoop (Dutch) - 500Hz - 1200Hz over 3.5s then silence for 0.5s repeatSound 20 DIN Tone (DK) - 1200Hz - 500Hz over 1s, silence 10ms repeatSound 21 French Fire Sound - 554Hz for 100ms & 440Hz for 400msFM Bedroom Conventional 2 tone sounder 715a/06Notes:1) Suitable for Type A indoor application only2) Approved with body moulding colour variations3) Meets requirements of EN 54-3: 2001 with the following tones:Sound 1 Continuous 850 HzSound 2 Fast Sweep 800 - 950 Hz @ 9 HzBases:Shallow base (various colour options)Deep base (various colour options)Intelligent Safety & Security Technology Ltd.6-7 Ludgate Square,, London EC4M 7AS, United KingdomTel: +44 845 116 2945E-mail: info@isst-uk.com • Website: www.isst-uk.comCertificate No: 506e-(cl-3) to EN 54-3: 2001 + A1: 2002 + A2: 2006Audible Warning DevicesCertificated ProductsLPCB Ref.No.BC-01 Conventional fire alarm bell 506e/01SC-01 Conventional Type B electronic sounder Base) 506e/02Note:Meets the requirements of EN54-3: 2001 at the following tones:1-Alternating Tones 800/970Hz at 2Hz2-Sweeping 800/970Hz at 7HzSBC-01 Conventional Type B electronic sounder beacon Base) 506e/03Notes:1. Meets the requirements of EN54-3: 2001 at the following tones:1-Alternating Tones 800/970Hz at 2Hz2-Sweeping 800/970Hz at 7Hz18 Jan 2014 417

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsLPCB Ref.No.2. The beacon functionality is not included within the scope of approval.Base:AH-03127MBKAC Alarm Company LimitedKAC House, Thornhill Road, North Moons Moat, Redditch, Worcestershire B98 9ND, United KingdomTel: +44 (0)1527 406655 • Fax: +44 (0)1527 406677E-mail: sales@kac.co.uk OR marketing@kac.co.uk • Website: www.kac.co.ukCertificate No: 166c to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificate No: 166d to EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005Certificated ProductsLPCB Ref.No.EMA1224B4R 4 Tone wall mounting conventional sounder, red. 166c/01Note: Meets the requirements of EN 54-3 for all tones and output levels at voltage ranges10-14 VDC and 21-27 VDCEMA1224B4W 4 Tone wall mounting conventional sounder, white 166c/02Note: Meets the requirements of EN 54-3 for all tones and output levels at voltage ranges10-14 VDC and 21-27 VDCSOU-SSR-4 4 Tone surface mounting conventional sounder with sealing kit, red 166c/03Note: Meets the requirements of EN 54-3 for all tones and output levels at voltage ranges10-14 VDC and 21-27 VDCSOU-SSW-4 4 Tone surface mounting conventional sounder with sealing kit, white 166c/04Note: Meets the requirements of EN 54-3 for all tones and output levels at voltage ranges10-14 VDC and 21-27 VDCSOU-LPR-4 4 Tone low profile mounting conventional sounder, red 166c/05Note: Meets the requirements of EN 54-3 for all tones and output levels at voltage ranges10-14 VDC and 21-27 VDCSOU-LPW-4 4 Tone low profile mounting conventional sounder, white. 166c/06Note: Meets the requirements of EN 54-3 for all tones and output levels at voltage ranges10-14 VDC and 21-27 VDCSOU-SR-4 4 Tone surface mounting conventional sounder, red. 166c/07Note: Meets the requirements of EN 54-3 for all tones and output levels at voltage ranges10-14 VDC and 21-27 VDCSOU-SW-4 4 Tone surface mounting conventional sounder, white. 166c/08Note: Meets the requirements of EN 54-3 for all tones and output levels at voltage ranges10-14 VDC and 21-27 VDCWMSST-xx-Pww Intelligent wall mounted sounder strobe 166c/09Notes:1. ww (Range 0-99 odd numbers only) indicates the communication software protocol2. X x indicates body colour. R =Red, W =Bright White, P =Pure White3. x X indicates lens colour. R =Red, A =Amber, G =Green, B =Blue, C =Clear4. Meets the requirements of EN54-3 for all tones and output levels at voltage range 15-32 VDCWMSOU-xx-Pww Intelligent wall mounted sounder 166c/10Notes:1. ww (Range 0-99 odd numbers only) indicates the communication software protocol2. xx indicates body colour. RR =Red, WW =Bright White, PW =Pure White3. Meets the requirements of EN54-3 for all tones and output levels atvoltage range 15-32 VDCIBSST-xx-Pww Intelligent integrated detector base sounder strobe 166c/11Notes:1. ww (Range 0-99 odd numbers only) indicates the communication software protocol2. X x indicates body colour. R =Red, W =Bright White,D =Detector White, K =Black, P =Pure White3. x X indicates lens colour. R =Red, A =Amber, G =Green,B =Blue, C =Clear4. Meets the requirements of EN54-3 for all tones at voltage range 15-32 VDC with theexception of Tones 4,10,11,17 and 20, which are approved at maximum volume onlyIBSOU-xx-Pww Intelligent integrated detector base sounder 166c/12Notes:1. ww (Range 0-99 odd numbers only) indicates the communication software protocol2. xx indicates body colour. RR =Red, WW =Bright White,418 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsLPCB Ref.No.DD =Detector White, KK =Black, PW =Pure White3. Meets the requirements of EN54-3 for all tones at voltage range15-32 VDC with the exception of Tones 4,10,11,17 and 20, which are approved atmaximum volume onlyEMA1224FR Conventional Type A wall mounted sounder (red) 166c/15Note: Meets the requirements of EN54-3 for all tones and output levels atvoltage ranges 10-14 VDC and 21-27 VDCEMA1224FW Conventional Type A wall mounted sounder (white) 166c/16Note: Meets the requirements of EN54-3 for all tones and output levels at voltage ranges10-14 VDC and 21-27 VDCDBS-4 Conventional Type A sounder base (white) 166c/27Note: Meets the requirements of EN54-3 for all tones and output levels atvoltage ranges 10-14 VDC and 21-27 VDCDBS-R-4 Conventional Type A sounder base (white), supplied with red lid 166c/28Note: Meets the requirements of EN54-3 for all tones and output levels atvoltage ranges 10-14 VDC and 21-27 VDCDBS-W-4 Conventional Type A sounder base (white), supplied with white lid 166c/29Note: Meets the requirements of EN54-3 for all tones and output levels atvoltage ranges 10-14 VDC and 21-27 VDCDBS1224B4W Conventional Type A wall mounted sounder 166c/30Note: Meets the requirements of EN54-3 for all tones and output levels atvoltage ranges 10-14 VDC and 21-27 VDCWMSST-xx-Pww Intelligent wall mounted sounder strobe with short circuit isolator 166d/01Notes:1. ww (Range 0-99 even numbers only indicates the ommunication software protocol2. X x indicates body colour. R =Red, W =Bright White, P =Pure White3. x X indicates lens colour. R =Red, A =Amber, G =Green, B =Blue, C =Clear4. Meets the requirements of EN54-3 for all tones and output levels at voltage range 15-28vWMSOU-xx-Pww Intelligent wall mounted sounder with short circuit isolator 166d/02Notes:1. ww (Range 0-99 even numbers only) indicates the communication software protocol2. xx indicates body colour. RR =Red, WW =Bright White, PW =Pure White3. Meets the requirements of EN54-3 for all tones and output levels at voltage range 15-28vIBSST-xx-Pww Intelligent integrated detector base sounder strobe with short circuit isolator 166d/03Notes:1. ww (Range 0-99 even numbers only) indicates the communication software protocol2. X x indicates body colour. R =Red, W =Bright White, D =Detector White, K=Black, P =Pure White3. x X indicates lens colour. R =Red, A =Amber, G =Green, B =Blue, C =Clear4. Meets the requirements of EN54-3 for all tones at voltage range 15-28v with theexception of Tones 4,10,11,17 and 20, which are approved at maximum volume onlyIBSOU-xx-Pww Intelligent integrated detector base sounder with short circuit isolator 166d/04Notes:1. ww (Range 0-99 even numbers only) indicates the communication software protocol2. xx indicates body colour. RR =Red, WW =Bright White, DD =Detector White, KK=Black, PW =Pure White3. Meets the requirements of EN54-3 for all tones at voltage range 15-28v with theexception of Tones 4,10,11,17 and 20, which are approved at maximum volume onlyEMA12FxxxxConventional Type A wall mounted sounder strobe (ELPBR/W, ESBR/W and ESBRS/WS 166c/31bases)Notes:1) Meets the requirements of EN54-3 for all tones and output levels at voltage ranges 10-14 VDC2) XX xx indicates body colour. RS =Red, WS =White3) xx XX indicates lens colour. SR =Red, SA =Amber, SC =ClearEMA24FxxxxConventional Type A wall mounted sounder strobe (ELPBR/W, ESBR/W and ESBRS/WS 166c/32bases)Notes:1) Meets the requirements of EN54-3 for all tones and output levels at voltage ranges 21-27 VDC2) XX xx indicates body colour. RS =Red, WS =White3) xx XX indicates lens colour. S -=Red and Amber supplied, SR =Red, SA =Amber,SB =BlueSST-xxWx-14Conventional Type A wall mounted sounder strobe (white) (ELPBR/W, ESBR/W and 166c/33ESBRS/WS bases)Notes:1) Meets the requirements of EN54-3 for all tones and output levels at voltage ranges 10-14 VDC2) XX Wx indicates base type. LP =ELPBR/W, - S =ESBR/W, SS =ESBRS/WS.3) xxW X indicates lens colour. R =Red, A =Amber, B =Blue, G =Green18 Jan 2014 419

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsLPCB Ref.No.SST-xxRx-14Conventional Type A wall mounted sounder strobe (red) (ELPBR/W, ESBR/W and 166c/34ESBRS/WS bases)Notes:1) Meets the requirements of EN54-3 for all tones and output levels at voltage ranges 21-27 VDC2) XX Rx indicates base type. LP =ELPBR/W, - S =ESBR/W, SS =ESBRS/WS.3) xxR X indicates lens colour. R =Red, A =Amber, B =BlueWMSST-RR-P30 Intelligent wall mounted sounder strobe with short circuit isolator. 166d/07Note:1. Meets the requirements of EN54-3 for all tones and output levels at voltage range 15-28vWMSST-RR-P29 Intelligent wall mounted sounder strobe. 166c/35Meets the requirements of EN54-3 for all tones and output levels at voltage range 15-32VDCIBSST-DR-P29 Intelligent integrated detector base sounder strobe 166c/36Meets the requirements of EN54-3 for all tones and output levels at voltage range 15-32VDC with the exception of Tones 4, 10, 11, 17 and 20 which are approved at maximumvolume only.IBSST-DR-P30 Intelligent integrated detector base sounder strobe with short circuit isolator 166d/08Note:1. Meets the requirements of EN54-3 for all tones at voltage range 15-28v with theexception of Tones 4,10,11,17 and 20,which are approved at maximum volume onlyEMA1224B4R-D 4 Tone Type A conventional wall mounting sounder, red 166c/37Note:Meets the requirements of EN 54-3 at all output levels, and voltageranges of 10-14 VDC and 19.5-28 VDC for the following tones:1 - Falling 1200Hz-500Hz over 3.5s followed by 0.5s silence2 - 800Hz continuous3 - 500Hz-1200Hz slow whoop4 - Falling 1200Hz-500Hz over 3.5s followed by 0.5s silenceEMA1224B4W-D 4 Tone Type A conventional wall mounting sounder, white 166c/38Note:Meets the requirements of EN 54-3 at all output levels, and voltageranges of 10-14 VDC and 19.5-28 VDC for the following tones:1 - Falling 1200Hz-500Hz over 3.5s followed by 0.5s silence2 - 800Hz continuous3 - 500Hz-1200Hz slow whoop4 - Falling 1200Hz-500Hz over 3.5s followed by 0.5s silenceDBS1224B4W-D 4 Tone Type A conventional ceiling mounting sounder, white 166c/40Note:Meets the requirements of EN 54-3 at all output levels, and voltageranges of 10-14 VDC and 19.5-28 VDC for the following tones:1 - Falling 1200Hz-500Hz over 3.5s followed by 0.5s silence2 - 800Hz continuous3 - 500Hz-1200Hz slow whoop4 - Falling 1200Hz-500Hz over 3.5s followed by 0.5s silenceEMA12BxSSy4 Tone Conventional 12 VDC Type A wall mounted sounder/strobe(ELPBR/W, ESBR/W and ESBRS/WS bases)Notes:Meets the requirements of EN54-3 for output levels at voltage range 10-14VDC thefollowing tones:166c/411. 800 Hz Continuous2. 800Hz /1000Hz Alternating3. 500Hz - 1200Hz slow whoop4. 800Hz DIN toneEMA24BxSSyx indicates body colour. R =Red, W =Whitey indicates lens colour. A =Amber, B =Blue, C =Clear , G =Green, R =Red4 Tone Conventional 24 VDC Type A wall mounted sounder/strobe(ELPBR/W, ESBR/W and ESBRS/WS bases)Notes:Meets the requirements of EN54-3 for output levels at voltage range 21-27VDCfor the following tones:1. 800 Hz Continuous2. 800Hz /1000Hz Alternating3. 500Hz - 1200Hz slow whoop4. 800Hz DIN tonex indicates body colour. R =Red, W =Whitey indicates lens colour. A =Amber, B =Blue, C =Clear , G =Green, R =Red, T =Redand Amber supplied166c/42420 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsEMA12BxSSy-DSST-LPRy-4SST-LPWy-4SST-SRy-4SST-SWy-4SST-SSRy-4SST-SSWy-44 Tone Conventional 24 VDC Type A wall mounted sounder/strobe(ELPBR/W, ESBR/W and ESBRS/WS bases)Notes:Meets the requirements of EN54-3 for output levels at voltage range 21-27VDCfor the following tones:1. 1200Hz - 500Hz DIN tone2. 800 Hz Continuous3. 500Hz - 1200Hz slow whoop4. 1200Hz - 500Hz DIN tonex indicates body colour. R =Red, W =Whitey indicates lens colour. A =Amber, B =Blue, C =Clear , G =Green, R =Red4 Tone Conventional 24 VDC Type A wall mounted Red sounder/strobe(ELPBR, ESBR and ESBRS bases)Notes:Meets the requirements of EN54-3 for output levels at voltage range 21-27VDCfor the following tones:1. 800 Hz Continuous2. 800Hz /1000Hz Alternating3. 500Hz - 1200Hz slow whoop4. 800Hz DIN toney indicates lens colour. A =Amber, B =Blue, C =Clear , G =Green, R =Red4 Tone Conventional 12 VDC Type A wall mounted White sounder/strobe(ELPBW, ESBW and ESBWS bases)Notes:Meets the requirements of EN54-3 for output levels at voltage range 10-14VDCfor the following tones:1. 800 Hz Continuous2. 800Hz /1000Hz Alternating3. 500Hz - 1200Hz slow whoop4. 800Hz DIN toney indicates lens colour. A =Amber, B =Blue, C =Clear , G =Green, R =Red4 Tone Conventional 24 VDC Type A wall mounted Red sounder/strobe(ELPBR, ESBR and ESBRS bases)Notes:Meets the requirements of EN54-3 for output levels at voltage range 21-27VDCfor the following tones:1. 800 Hz Continuous2. 800Hz /1000Hz Alternating3. 500Hz - 1200Hz slow whoop4. 800Hz DIN toney indicates lens colour. A =Amber, B =Blue, C =Clear , G =Green, R =Red4 Tone Conventional 12 VDC Type A wall mounted White sounder/strobe(ELPBW, ESBW and ESBWS bases)Notes:Meets the requirements of EN54-3 for output levels at voltage range 10-14VDCfor the following tones:1. 800 Hz Continuous2. 800Hz /1000Hz Alternating3. 500Hz - 1200Hz slow whoop4. 800Hz DIN toney indicates lens colour. A =Amber, B =Blue, C =Clear , G =Green, R =Red4 Tone Conventional 24 VDC Type A wall mounted Red sounder/strobe(ELPBR, ESBR and ESBRS bases)Notes:Meets the requirements of EN54-3 for output levels at voltage range 21-27VDCfor the following tones:1. 800 Hz Continuous2. 800Hz /1000Hz Alternating3. 500Hz - 1200Hz slow whoop4. 800Hz DIN toney indicates lens colour. A =Amber, B =Blue, C =Clear , G =Green, R =Red4 Tone Conventional 12 VDC Type A wall mounted White sounder/strobe(ELPBW, ESBW and ESBWS bases)Notes:Meets the requirements of EN54-3 for output levels at voltage range 10-14VDCfor the following tones:1. 800 Hz Continuous2. 800Hz /1000Hz Alternating3. 500Hz - 1200Hz slow whoop4. 800Hz DIN toneLPCB Ref.No.166c/44166c/45166c/46166c/47166c/48166c/49166c/5018 Jan 2014 421

PART 1: SECTION 7ALARM WARNING DEVICESCertificated Productsy indicates lens colour. A =Amber, B =Blue, C =Clear , G =Green, R =RedLPCB Ref.No.Bases:ELPBR/W Low profile base IP21C, red or whiteESBR/W Standard base IP54, red or whiteESBRS/WS Standard base and IP66 sealing kit, red or whiteLabor Strauss Sicherungsanlagenbau GmbHWiegelestrasse 36, A-1231 Vienna, AustriaTel: +43 1 52114-44 • Fax: +43 1 52114-27E-mail: andreas.schumacher@lst.at • Website: www.lst.atCertificate No: 546a-(cl-3) to EN 54-3: 2001 + A1: 2002 + A2: 2006Audible Warning DevicesCertificated ProductsLPCB Ref.No.200/FBRI/SOUW Conventional indoor Type A sounder base 546a/04Notes:1. Also approved in Off-white, Ivory and Alternative white (-O, -I, and -A suffixes)2. Meets the requirements of EN 54-3 at the following tone settings on low, medium andhigh volume settings:1 - LF Sweep (Cranford sweep) (800-1000Hz @ 0.5 Sec)3 - Alternative Warble (800-1000Hz @ 0.5 Sec)11 - Dutch Sweep Tone (970Hz Cont)25 - German DIN Tone (Sweep 1200-500Hz @ 1Hz)27- French Tone AFNOR (554Hz 100ms and 440Hz for 400 ms)3. Cover plate (Part No. 116-099) must be used.Morley-IAS Fire Systems by Honeywell (Pittway Systems Technology Group (Europe)Ltd)Charles Avenue, Burgess Hill, West Sussex RH15 9UFTel: +44 (0)1444 235556 • Fax: +44 (0)1444 254410E-mail: sales@morleyias.co.uk • Website: www.morley-ias.co.ukCertificate No: 166c to EN 54-3: 2001Certificate No: 166d to EN 54-3: 2001 and CEA GEI 1-052 Draft 2.0: 11.06.97Certificate No: 166h-(cl-3) to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificate No: 166j-(cl-3) to EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005Certificated ProductsLPCB Ref.No.MI-WSDB-X-XX Intelligent wall mounted sounder strobe 166c/09Notes:1) x-xx indicates body colour. R=Red, W=Detector White2) x-xx indicate lens colour. RD=Red, AM=Amber, GR=Green, BL=Blue, CL=ClearMI-WSD-X Intelligent wall mounted sounder 166c/10Note:1) x indicates body colour. R=Red, W=Detector WhiteMI-IBSDB-X-XX Intelligent integrated detector base sounder strobe 166c/11Notes:1) x-xx indicates body colour. R=Red, W=Detector White, PW=Pure White, B=Black2) x-xx indicate lens colour. RD=Red, AM=Amber, GR=Green, BL=Blue, CL=ClearMI-IBSD-X Intelligent integrated detector base sounder 166c/12Note:1) x indicates body colour. R=Red, W=Detector White, PW=Pure White, B=BlackMI-WSDB-X-XX-I Intelligent wall mounted sounder strobe with short circuit isolator 166d/01Notes:1) x-xx indicates body colour. R=Red, W=Detector White422 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsLPCB Ref.No.2) x-xx indicate lens colour. RD=Red, AM=Amber, GR=Green, BL=Blue, CL=ClearMI-WSD-X-1 Intelligent wall mounted sounder with short circuit isolator 166d/02Note:1) x indicates body colour. R=Red, W=Detector WhiteMI-IBSDB-X-XX-I Intelligent integrated detector base sounder strobe with short circuit isolator 166d/03Notes:1) x-xx indicates body colour. R=Red, W=Detector White, PW=Pure White, B=Black2) x-xx indicate lens colour. RD=Red, AM=Amber, GR=Green, BL=Blue, CL=ClearMI-IBSD-X-I Intelligent integrated detector base sounder with short circuit 166d/04Note:1) x indicates body colour. R=Red, W=Detector White, PW=Pure White, B=BlackMI-WSO-xx-NAnalogue addressableType A/B wall mounted sounder166h/01(B501AP-cc, Bcc bases, and Wcc bases)Notes:1. xx indicates body colour. PR =Red, PP =Pure White2. yy indicates customer and associated communication protocol.01 indicates Advanced Protocol (and Honeywell 500 series protocol)00 and 02-99 indicates Advanced Protocol (and System Sensor 500 seriesprotocol)3. Meets the requirements of EN54-3 for all output levels at voltage range 15-32VDC andtones:1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;12) 420Hz, 0.625s on, 0.625 sec off;13) 500-1200Hz, 0.25 sec off, 3.75 sec on;14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;18) 970, 1Hz 500ms on, 500ms off;19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;20) 800Hz; 21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;24) 500 - 1200Hz, (0.5s off, 3.5s on);25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;29) 500 - 1000, 7Hz;30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.4. Approved as Type B only when used with Wcc base.MI-WSS-xx-NAnalogue addressable Type A/B wall mounted sounder/strobe166h/02(B501AP-cc, Bcc, and Wcc bases)Notes:1. xx indicates body/lens colour. PR =Red/Red, PA =Amber/Amber, PC =Clear/Clear2. yy indicates customer and associated communication protocol.01 indicates Advanced Protocol (and Honeywell 500 series protocol)00 and 02-99 indicates Advanced Protocol (and System Sensor 500 seriesprotocol)3. Meets the requirements of EN54-3 for all output levels at voltage range 15-32VDC andtones:1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;12) 420Hz, 0.625s on, 0.625 sec off;13) 500-1200Hz, 0.25 sec off, 3.75 sec on;14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;18) 970, 1Hz 500ms on, 500ms off;19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;20) 800Hz; 21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;24) 500 - 1200Hz, (0.5s off, 3.5s on);25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;29) 500 - 1000, 7Hz;30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.4. Certification excludes the strobe function.5. Approved as Type B only when used with Wcc base.MI-BSO-xx-NAnalogue addressable Type A integrated detector base sounder(B501AP-cc, Bcc and Wcc bases)166h/0318 Jan 2014 423

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsMI-BSS-xx-NMI-WSO-xx-INotes:1. xx indicates body colour. PP =Pure White, DD =Detector White2. yy indicates customer and associated communication protocol.01 indicates Advanced Protocol (and Honeywell 500 series protocol)00 and 02-99 indicates Advanced Protocol (and System Sensor 500 seriesprotocol)3. Meets the requirements of EN54-3 for all output levels at voltage range 15-32VDC andtones:1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;12) 420Hz, 0.625s on, 0.625 sec off;13) 500-1200Hz, 0.25 sec off, 3.75 sec on;14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;18) 970, 1Hz 500ms on, 500ms off;19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;20) 800Hz; 21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;24) 500 - 1200Hz, (0.5s off, 3.5s on);25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;29) 500 - 1000, 7Hz;30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.Analogue addressable Type A integrated detector base sounder/strobe(B501AP-cc, Bcc and Wcc bases)Notes:1. xx indicates body/lens colour. PR =Pure White/Red,PA =Pure White/Amber, PC =Pure White/Clear, DR =Detector White/Red,DA =Detector White/Amber, DC =Detector White/Clear2. yy indicates customer and associated communication protocol.01 indicates Advanced Protocol (and Honeywell 500 series protocol)00 and 02-99 indicates Advanced Protocol (and System Sensor 500 seriesprotocol)3. Meets the requirements of EN54-3 for all output levels at voltage range 15-32VDCand tones:1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;12) 420Hz, 0.625s on, 0.625 sec off;13) 500-1200Hz, 0.25 sec off, 3.75 sec on;14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;18) 970, 1Hz 500ms on, 500ms off;19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;20) 800Hz; 21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;24) 500 - 1200Hz, (0.5s off, 3.5s on);25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;29) 500 - 1000, 7Hz;30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.4. Certification excludes the strobe function.Analogue addressableType A/B wall mounted sounder with short circuit isolator(B501AP-cc, Bcc bases, and Wcc bases)Notes:1. xx indicates body colour. PR =Red, PP =Pure White2. yy indicates customer and associated communication protocol.01 indicates Advanced Protocol (and Honeywell 500 series protocol)00 and 02-99 indicates Advanced Protocol (and System Sensor 500 series protocol)3. Meets the requirements of EN54-3 for all output levels at voltage range 15-29VDC andtones:1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;12) 420Hz, 0.625s on, 0.625 sec off;13) 500-1200Hz, 0.25 sec off, 3.75 sec on;LPCB Ref.No.166h/04166j/01424 18 Jan 2014

Certificated ProductsMI-WSS-xx-IMI-BSO-xx-IPART 1: SECTION 7ALARM WARNING DEVICES14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;18) 970, 1Hz 500ms on, 500ms off;19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;20) 800Hz; 21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;24) 500 - 1200Hz, (0.5s off, 3.5s on);25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;29) 500 - 1000, 7Hz;30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.4. Approved as Type B only when used with Wcc base.Analogue addressable Type A/B wall mounted sounder/strobe with short circuit isolator(B501AP-cc, Bcc bases, and Wcc bases)Notes:1. xx indicates body/lens colour. PR =Red/Red, PA =Amber/Amber, PC =Clear/Clear2. yy indicates customer and associated communication protocol.01 indicates Advanced Protocol (and Honeywell 500 series protocol)00 and 02-99 indicates Advanced Protocol (and System Sensor 500 seriesprotocol)3. Meets the requirements of EN54-3 for all output levels at voltage range 15-29VDC andtones:1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;12) 420Hz, 0.625s on, 0.625 sec off;13) 500-1200Hz, 0.25 sec off, 3.75 sec on;14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;18) 970, 1Hz 500ms on, 500ms off;19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;20) 800Hz; 21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;24) 500 - 1200Hz, (0.5s off, 3.5s on);25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;29) 500 - 1000, 7Hz;30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.4. Certification excludes the strobe function.5. Approved as Type B only when used with Wcc base.Analogue addressable Type A integrated detector base sounder with short circuit isolatorLPCB Ref.No.166j/02166j/03(B501AP-cc, Bcc and Wcc bases)Notes:1. xx indicates body colour. PP =Pure White, DD =Detector White2. yy indicates customer and associated communication protocol.01 indicates Advanced Protocol (and Honeywell 500 series protocol)00 and 02-99 indicates Advanced Protocol (and System Sensor 500 seriesprotocol)3. Meets the requirements of EN54-3 for all output levels at voltage range 15-29VDC andtones:1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;12) 420Hz, 0.625s on, 0.625 sec off;13) 500-1200Hz, 0.25 sec off, 3.75 sec on;14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;18) 970, 1Hz 500ms on, 500ms off;19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;20) 800Hz; 21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;24) 500 - 1200Hz, (0.5s off, 3.5s on);25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;29) 500 - 1000, 7Hz;30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.MI-BSS-xx-I Analogue addressable Type A integrated detector base sounder/strobe with short circuit 166j/0418 Jan 2014 425

PART 1: SECTION 7ALARM WARNING DEVICESCertificated Productsisolator(B501AP-cc, Bcc and Wcc bases)Notes:1. xx indicates body/lens colour. PR =Pure White/Red,PA =Pure White/Amber, PC =Pure White/Clear, DR =Detector White/Red,DA =Detector White/Amber, DC =Detector White/Clear2. yy indicates customer and associated communication protocol.01 indicates Advanced Protocol (and Honeywell 500 series protocol)00 and 02-99 indicates Advanced Protocol (and System Sensor 500 seriesprotocol)3. Meets the requirements of EN54-3 for all output levels at voltage range 15-29VDCand tones:1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;12) 420Hz, 0.625s on, 0.625 sec off;13) 500-1200Hz, 0.25 sec off, 3.75 sec on;14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;18) 970, 1Hz 500ms on, 500ms off;19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;20) 800Hz; 21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;24) 500 - 1200Hz, (0.5s off, 3.5s on);25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;29) 500 - 1000, 7Hz;30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.4. Certification excludes the strobe function.LPCB Ref.No.BasesB501AP-ccBccWccLow profile base IP21C, cc indicates colour, Blank=Pure White, IV=Detector WhiteDeep base IP44, cc indicates colour, RR=Red, DD=Detector White, PW=Pure WhiteWaterproof base IP65, cc indicates colour, RR=Red, DD=Detector White, PW=Pure WhiteMultron Systems Pte Ltd217 Kallang Bahru, Multron Building, Singapore 339 347, SingaporeTel: +65 6743 2555 / 6395 6868 • Fax: +65 6743 2777 / 6395 6869E-mail: info@multron.com • Website: www.multron.comCertificate No: 548e-(cl-6) to EN 54-3: 2001 + A1: 2002 + A2: 2006Audible Warning DevicesCertificated ProductsLPCB Ref.No.AVD-A403 Intelligent sounder strobe (Shallow Base and C-94DB Base) 548e/02Notes:1. Meets the requirements of EN 54-3: 2001 at the following tones:Tone 14 2400Hz - 2900Hz @ 3HzTone 16 500HZ - 1200Hz, 3.75s on / 0.25s offPre Alarm 800Hz, 1s on / 1s off2. Approved in both normal and power saving mode3. The strobe function is not in the scope of this approval4. Approved with single address and dual address (pre-alarm and main alarm).BasesShallow BaseC-94DB426 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESNitin Ventures FZEP.O. Box 262294, Jebel Ali Free Zone, Dubai, United Arab EmiratesTel: +97 148865858/859 • Fax: +97 148865800E-mail: sales@nitinventures.com • Website: www.nitinfire.comCertificate No: 010ak-(cl-2) to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificated ProductsLPCB Ref.No.NV-IA-SND XP95 Type B intelligent open area sounder (Red) (NV-IAI-DIB base) 010ak/01Note:1. Meets the requirements of EN 54-3:2001 at the following tones:Apollo standard - 840Hz, 0.5s / 558Hz, 0.5sDutch (slow whoop) - 500-1200Hz in 3.5s, 0.5s offGerman DIN - 1200-500Hz over 1sNV-IA-SBR XP95 Type B intelligent open area sounder beacon (Red) (NV-IAI-BID) 010ak/03Note:1. Meets the requirements of EN 54-3:2001 at the following tones:Apollo standard - 840Hz, 0.5s / 558Hz, 0.5sDutch (slow whoop) - 500-1200Hz in 3.5s, 0.5s offGerman DIN - 1200-500Hz over 1sBases:NV-IAI-DIBEnhanced deep isolating base (Red)Notifier by Honeywell (Pittway Systems Technology Group (Europe) Ltd)Charles Avenue, Burgess Hill, West Sussex RH15 9UF, United KingdomTel: +44 (0)1444 230230 • Fax: +44 (0)1444 230689E-mail: sales@notifierfiresystems.co.uk • Website: www.notifierfiresystems.co.ukCertificate No: 166c to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificate No: 166d to EN 54-3: 2001 and CEA GEI 1-052 Draft 2.0: 11.06.97Certificate No: 166j-(cl-2) to EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005Certificated ProductsLPCB Ref.No.AWSB32/X/X Intelligent wall mounted sounder strobe 166c/09Notes:1) x/x indicates body colour. R=Red, W=Detector White2) x/x indicates lens colour. R=Red, A=Amber, G=Green, B=Blue, C=ClearAWS32/X Intelligent wall mounted sounder 166c/10Note:1) x indicates body colour. R=Red, W=Detector WhiteABSB32/X/X Intelligent integrated detector base sounder strobe 166c/11Notes:1) x/x indicates body colour. R=Red, W=Detector White, PW=Pure White, B=Black2) x/x indicates lens colour. R=Red, A=Amber, G=Green, B=Blue, C=ClearABS32/X Intelligent integrated detector base sounder 166c/12Note:1) x indicates body colour. R=Red, W=Detector White, PW=Pure White, B=BlackAWSB32/X/X-I Intelligent wall mounted sounder strobe with short circuit isolator 166d/01Notes:1) x/x indicates body colour. R=Red, W=Detector White2) x/x indicates lens colour. R=Red, A=Amber, G=Green, B=Blue, C=ClearAWS32/X-I Intelligent wall mounted sounder with short circuit isolator 166d/02Note:1) x indicates body colour. R=Red, W=Detector WhiteABSB32/X/X-I Intelligent integrated detector base sounder strobe with short circuit isolator 166d/03Notes:1) x/x indicates body colour. R=Red, W=Detector White, PW=Pure White, B=Black2) x/x indicates lens colour. R=Red, A=Amber, G=Green, B=Blue, C=ClearABS32/X-I Intelligent integrated detector base sounder with short circuit isolator 166d/04Note:18 Jan 2014 427

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsLPCB Ref.No.1) x indicates body colour. R=Red, W=Detector White, PW=Pure White, B=BlackNS4/R 4 Tone wall mounting conventional sounder (red) 166c/01Note:1) Meets the requirements of EN54-3 for all tones and output levels atvoltage ranges 10-14v and 21-27vNS4/R/W 4 Tone wall mounting conventional sounder (white) 166c/02Note:1) Meets the requirements of EN54-3 for all tones and output levels atvoltage ranges 10-14v and 21-27vNFXI-WS-zAnalogue addressableType A/B wall mounted sounder with short circuit isolator166j/01(B501AP-cc, Bcc bases, and Wcc bases)Notes:1. z indicates body colour. R =Red, W =Pure White2 Advanced Protocol (and System Sensor 500 series protocol)3. Meets the requirements of EN54-3 for all output levels at voltage range 15-29VDC andtones:1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;12) 420Hz, 0.625s on, 0.625 sec off; 13) 500-1200Hz, 0.25 sec off, 3.75 secon;14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;18) 970, 1Hz 500ms on, 500ms off;19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;20) 800Hz; 21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;24) 500 - 1200Hz, (0.5s off, 3.5s on);25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;29) 500 - 1000, 7Hz;30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.4. Approved as Type B only when used with Wcc base.NFXI-WSF-zzAnalogue addressable Type A/B wall mounted sounder/strobe with short circuit isolator 166j/02(B501AP-cc, Bcc bases, and Wcc bases)Notes:1. zz indicates body/lens colour. RR =Red/Red, WC =Clear/Clear2. Advanced Protocol (and System Sensor 500 series protocol)3. Meets the requirements of EN54-3 for all output levels at voltage range 15-29VDC andtones:1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;12) 420Hz, 0.625s on, 0.625 sec off; 13) 500-1200Hz, 0.25 sec off, 3.75 secon;14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;18) 970, 1Hz 500ms on, 500ms off;19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;20) 800Hz; 21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;24) 500 - 1200Hz, (0.5s off, 3.5s on);25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;29) 500 - 1000, 7Hz;30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.4. Certification excludes the strobe function.5. Approved as Type B only when used with Wcc base.NFXI-BS-zzAnalogue addressable Type A integrated detector base sounder with short circuit isolator 166j/03(B501AP-cc, Bcc and Wcc bases)Notes:1. zz indicates body colour. W =Pure White, IV =Detector White2 Advanced Protocol (and System Sensor 500 series protocol)3. Meets the requirements of EN54-3 for all output levels at voltage range 15-29VDC andtones:1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;428 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsNFXI-BSF-zzzon;11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;12) 420Hz, 0.625s on, 0.625 sec off; 13) 500-1200Hz, 0.25 sec off, 3.75 sec14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;18) 970, 1Hz 500ms on, 500ms off;19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;20) 800Hz; 21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;24) 500 - 1200Hz, (0.5s off, 3.5s on);25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;29) 500 - 1000, 7Hz;30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.Analogue addressable Type A integrated detector base sounder/strobe with short circuitisolator(B501AP-cc, Bcc and Wcc bases)Notes:1. zzz indicates body/lens colour. WC =Pure White/Clear, IVC =Detector White/Clear2. Advanced Protocol (and System Sensor 500 series protocol)3. Meets the requirements of EN54-3 for all output levels at voltage range 15-29VDCand tones:1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;12) 420Hz, 0.625s on, 0.625 sec off; 13) 500-1200Hz, 0.25 sec off, 3.75 secon;14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;18) 970, 1Hz 500ms on, 500ms off;19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;20) 800Hz; 21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;24) 500 - 1200Hz, (0.5s off, 3.5s on);25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;29) 500 - 1000, 7Hz;30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.4. Certification excludes the strobe function.LPCB Ref.No.166j/04Orient Corporation Pte. Ltd.Block 3018, Bedok North Street 5, #05-51, Eastlink Light Industrial Building 486132, SingaporeTel: (+65) 6242 5489 • Fax: (+65) 6241 2291E-mail: corporate@orientcorp.netCertificate No: 506e-(cl-6) to EN 54-3: 2001 + A1: 2002 + A2: 2006Audible Warning DevicesCertificated ProductsLPCB Ref.No.OCI 60039 Conventional fire alarm bell 506e/01OCI 60040-S Conventional Type B electronic sounder (OCI 60040-B base) 506e/02Note:1. Meets the requirements of EN54-3: 2001 at the following tones: 1. Alternatingtones 800/970Hz at 2Hz 2. Sweeping 800/970Hz at 7HzOCI 60040-BS Conventional Type B electronic sounder beacon (OCI 60040-B base) 506e/03Note:1. Meets the requirements of EN54-3: 2001 at the following tones:1. Alternating tones 800/970Hz at 2Hz2. Sweeping 800/970Hz at 7Hz2. The beacon functionality is not included within the scope of approvalBase18 Jan 2014 429

PART 1: SECTION 7ALARM WARNING DEVICESOCI 60040-B BasePelco Finland OySokerilinnantie 11C, 02600, Espoo, FinlandTel: +358 10 446 511 • Fax: +358 10 446 5103E-mail: info.fi@pelco.com • Website: www.pelco.com/nordicCertificate No: 010ak-(cl-1) to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificated ProductsESI-52Type B intelligent open-area sounder (red)(06728115 and 06728116 bases)Note:1. Meets the requirements of EN 54-3:2001 at the following tones:Apollo standard - 840Hz, 0.5s / 558Hz, 0.5sDutch (slow whoop) - 500-1200Hz in 3.5s, 0.5s offGerman DIN - 1200-500Hz over 1sESI-53Type B intelligent open-area sounder beacon (red)(06728115 and 06728116 bases)Note:1. Meets the requirements of EN 54-3:2001 at the following tones:Apollo standard - 840Hz, 0.5s / 558Hz, 0.5sDutch (slow whoop) - 500-1200Hz in 3.5s, 0.5s offGerman DIN - 1200-500Hz over 1sESI-51 Analogue addressable Type B intelligent open area sounder beacon (Red) (06728116,06728115 bases)Note:Meets the requirements of EN 54-3:2001 at the following tones:T1- Apollo Evacuation 558Hz, 0.5 s / 840Hz, 0.5sT3- Dutch Slow Whoop 500-1200Hz in 3.5s, 0.5s offT4- German DIN1200 - 500Hz over 1sLPCB Ref.No.010ak/01010ak/03010ak/05Bases:06728115 Enhanced deep isolating base (white)06728116 Enhanced deep isolating base (red)Protec Fire Detection plcProtec House, Churchill Way, Nelson, Lancashire BB9 6RT, United KingdomTel: +44 (0)1282 717171 • Fax: +44 (0)1282 717273E-mail: sales@protec.co.uk • Website: www.protec.co.ukCertificate No: 201n to EN 54-3: 2001Certificated ProductsLPCB Ref.No.6000/SSR2 Analogue addressable Type A/B sounder - red (Shallow and N29-982-75 base) 201n/01Notes:1) The device is supplied with a shallow base.2) Meets the requirements of EN 54-3: 2001 with the following tones:1 - Continuous tone - 990 Hz2 - Warble tone - 990 / 695 Hz6000/SSW2 Analogue addressable Type A/B sounder - white (Shallow and N29-982-75 base) 201n/02Notes:1) This device is supplied with a shallow base.2) Meets the requirements of EN 54-3: 2001 with the following tones:1 - Continuous tone - 990 Hz2 - Warble tone - 990 / 695 Hz6000/SSR2/NL Analogue addressable Type A/B sounder - red (Shallow and N29-982-75 base) 201n/03Notes:1) This device is supplied with a shallow base.2) Meets the requirements of EN 54-3: 2001 with the following tones:430 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsLPCB Ref.No.1 - Continuous tone - 990 Hz2 - Warble tone - 990 / 695 Hz3 - Dutch whoop - 500 / 1500 Hz6000/SSW2/NL Analogue addressable Type A/B sounder - white (Shallow and N29-982-75 base) 201n/04Notes:1) This device is supplied with a shallow base.2) Meets the requirements of EN 54-3: 2001 with the following tones:1 - Continuous tone - 990 Hz2 - Warble tone - 990 / 695 Hz3 - Dutch whoop - 500 / 1500 HzBases:N29-982-75 Deep baseShallow baseRavel Electronics LtdUnit 11, Chancel Industrial Estate, Newhall Street, Willenhall WV13 1NX, United KingdomTel: 0845 835 8855E-mail: exportsales@ravelfire.co.ukCertificate No: 506e-(cl-7) to EN 54-3: 2001 + A1: 2002 + A2: 2006Alarm Warning DevicesCertificated ProductsLPCB Ref.No.RE-736B Conventional fire alarm bell 506e/01ZE-736B Conventional fire alarm bell 506e/01RE-736S Conventional Type B electronic sounder (RE-736SB base) 506e/02Note:1. Meets the requirements of EN54-3: 2001 at the following tones:1. Alternating tones 800/970Hz at 2Hz2. Sweeping 800/970Hz at 7HzZE-736S Conventional Type B electronic sounder (ZE-736SB base) 506e/02Note:1. Meets the requirements of EN54-3: 2001 at the following tones:1. Alternating tones 800/970Hz at 2Hz2. Sweeping 800/970Hz at 7HzRE-736SS Conventional Type B electronic sounder beacon (RE-736SB base) 506e/031. Meets the requirements of EN54-3: 2001 at the following tones:1. Alternating tones 800/970Hz at 2Hz2. Sweeping 800/970Hz at 7Hz2. The beacon functionality is not included within the scope of approvalZE-736SS Conventional Type B electronic sounder beacon (ZE-736SB base) 506e/031. Meets the requirements of EN54-3: 2001 at the following tones:1. Alternating tones 800/970Hz at 2Hz2. Sweeping 800/970Hz at 7Hz2. The beacon functionality is not included within the scope of approvalSHIELD FIRE, SAFETY AND SECURITY LTDRedburn House, 2a Tonbridge Road, Romford, Essex RM3 8QE, United KingdomTel: +44 207 712 1610 • Fax: +44 207 712 1578E-mail: shielduk@shieldglobal.com • Website: www.shieldglobal.comCertificate No: 548e-(cl-4) to EN 54-3: 2001 + A1: 2002 + A2: 2006Audible Warning DevicesCertificated ProductsLPCB Ref.No.S-A491 Intelligent sounder strobe (Shallow Base and S-49DB Base) 548e/02Notes:1. Meets the requirements of EN 54-3: 2001 at the following tones:18 Jan 2014 431

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsLPCB Ref.No.Tone 14 2400Hz - 2900Hz @ 3HzTone 16 500HZ - 1200Hz, 3.75s on / 0.25s offPre Alarm 800Hz, 1s on / 1s off2 Approved in both normal and power saving mode3. The visual alarm function is not in the scope of this approval4. Approved with single address and dual address (pre-alarm and main alarm).S-C481 Conventional sounder strobe (Shallow Base and S-49DB Base) 548e/01Notes:1. Meets the requirements of EN 54-3: 2001 at the following tones:Tone 01 2800Hz 0.34s off/0.4s on Tone 02 2400Hz -2900Hz @3Hz2. The visual alarm function is not in the scope of this approval.BasesShallow BaseDeep baseSiemens Switzerland Limited, Building Technologies DivisionInternational Headquarters, Gubelstrasse 22, CH-6301 Zug, SwitzerlandTel: +41 (0) 41 724 24 24 • Fax: +41 (0) 41 724 35 22Certificate No: 126ar-(cl-1) to EN54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005Certificate No: 1157a-(cl-1) to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificate No: 531p-(cl-1) to EN 54-3: 2001 + A1: 2002 + A2: 2006; EN 54-17: 2005SoundersCertificated ProductsLPCB Ref.No.FDS229-R Analogue addressable sounder beacon (Red) with short circuit isolator 531p/03(FDB221, FDB221-AA, FDB222, FDB291 and FDB293)1) Meets the requirements of EN 54-3 at the following tones:Continuous 970Hz1s Intermittent 950Hz1s Sweep-down 1200Hz-500Hz3.5s Slow-whoop sweep-up, 0.5s linear 500Hz-1200HzPulse-tone 150ms on 100ms off 500HzIntermittent 150ms on 600ms off 500HzContinuous 500HzAlternating 0.1s on 0.4s off 560Hz/440HzIntermittent 600ms on 650ms off 420Hz3.75s Slow-whoop sweep-up, 0.25s linear 500Hz-1200HzIntermittent 0.5s on 0.5s off 1s pause 970HzFDS229-A Analogue addressable sounder beacon (Amber) with short circuit isolator 531p/02(FDB221, FDB221-AA, FDB222, FDB291 and FDB293)1) Meets the requirements of EN 54-3 at the following tones:Continuous 970Hz1s Intermittent 950Hz1s Sweep-down 1200Hz-500Hz3.5s Slow-whoop sweep-up, 0.5s linear 500Hz-1200HzPulse-tone 150ms on 100ms off 500HzIntermittent 150ms on 600ms off 500HzContinuous 500HzAlternating 0.1s on 0.4s off 560Hz/440HzIntermittent 600ms on 650ms off 420Hz3.75s Slow-whoop sweep-up, 0.25s linear 500Hz-1200HzIntermittent 0.5s on 0.5s off 1s pause 970HzFDS221-xAnalogue addressable loop sounder with short circuit isolator(FDB221, FDB221-AA, FDB222, FDB291 and FDB293 bases)Notes:1. Key, x = R Body colour Redx = W Body colour White2. Meets the requirements of EN 54-3 at the following tones:970Hz Continuous950Hz 1s Intermittent1200-500Hz Sweep Down 1s520-1200Hz Sweep Up 3.5s, 0.5s off500Hz Pulse 0.15s on, 0.1s off531p/01432 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsLPCB Ref.No.500Hz Pulse 0.15s on, 0.6s off500Hz Continuous560Hz/440Hz 100ms on, 400ms off420Hz 0.6s on, 0.65s off500Hz-1200Hz Sweep Up 3.75s, 0.25s off970Hz 3 pulses 0.5s on 0.5s off, then 1.5s pauseDBS720 Analogue addressable Type A base sounder 1157a/01Notes:1. Meets the requirements of EN 54-3 with the following tones:970Hz Continuous950Hz; 1s on,1s off Intermittent1200Hz500Hz at 1Hz Tone 3 Sweep down500Hz1200Hz over 3.5s, 0.5s off Slow whoop500Hz; 0.15s on, 0.1s off Pulse tone500Hz; 0.15s on, 0.6s off Intermittent500Hz Tone 7 Continuous560Hz 0.1s/440Hz 0.4s Tone 8 Alternating420Hz; 0.6s on, 0.65s off Tone 9 Intermittent5001200Hz over 3.75s, 0.25s off Tone 10 Slow whoop970Hz; 3 pulses 0.5s on, 0.5s off repeated after 1.5s Tone 11 Intermittent2. Approved only when used with detector devices OP720, OH720, HI720 or HI722FDSB291 Analogue addressable loop sounder base 1157a/02Note:1. Meets the requirements of EN 54-3 at the following tones:970Hz Continuous950Hz 1s Intermittent1200-500Hz Sweep Down 1s520-1200Hz Sweep Up 3.5s, 0.5s off500Hz Pulse 0.15s on, 0.1s off500Hz Pulse 0.15s on, 0.6s off500Hz Continuous560Hz/440Hz 100ms on, 400ms off420Hz 0.6s on, 0.65s off500Hz-1200Hz Sweep Up 3.75s, 0.25s off970Hz 3 pulses 0.5s on 0.5s off, then 1.5s pause.FDSB292 Analogue conventional (collective) sounder base 1157a/03Notes:1. Approved for use with detector model FDOOT241-9 in collective mode2. Meets the requirements of EN 54-3 at the following tone:970Hz ContinuousAccessories:FDB221FDB221-AAFDB291FDB293FDB221/FDB221-AAFDB222 Flat,FDB291FDB293Detector baseDetector base, addressed with 2 micro-terminalsBase attachmentBase attachment wetAnalogue addressable baseAnalogue addressable baseBase attachmentBase attachment humidSMS (Novar Systems Ltd)Hamilton Industrial Park, 140 Waterside Road, Leicester LE5 1TN, United KingdomTel: +44 (0)116 246 2100 • Fax: +44 (0)116 246 2016Website: www.smsfire.co.ukCertificate No: 042bk to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificated ProductsLPCB Ref.No.CONV-SN-R Conventional Red LP Indoor Sounder 042bk/01Note:1. Meets the requirements of EN 54-3:2001 at Tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.18 Jan 2014 433

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsLPCB Ref.No.6. Continuous 970 Hz.CONV-IP-SN-R Conventional Red LP Outdoor Sounder 042bk/03Note:1. Meets the requirements of EN 54-3:2001 at Tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.CONV-SN-ST-RR Conventional Red LP Indoor Sounder/Strobe Red Lens 042bk/05Notes:1. Meets the requirements of EN 54-3:2001 at Tones:1. Alternating tone 800/970 Hz @ 2Hz.3. Intermittent tone 970 Hz @ 1Hz.6. Continuous 970 Hz.2. Certification excludes Strobe functionSterling Safety SystemsUnit B12a, Holly Farm Business Park, Honiley, Warwickshire CV8 1NP, United KingdomTel: +44(0)1926485282 • Fax: +44(0)1926485090E-mail: info@sterlingsafety.co.uk • Website: www.sterlingsafety.co.ukCertificate No: 928g to EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005Certificate No: 928q-(cl-5) to EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-25: 2008Certificated ProductsLPCB Ref.No.HFI-WSR-01 Analogue addressable Type A sounder with short circuit isolator 928g/01Notes:1. Meets the requirements of EN 54-3 at the following tone settings:Dual tone 990 to 650Hz, 2Hz (250ms-250ms)Pulsed tone 990Hz, 1Hz (500ms ON - 500ms OFF)Continuous tone 990Hz, steadyHFW-BS-01 Wireless type A sounder base 928q/01Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 970Hz2. Warble 800/1000/1Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. Approved for use with HFW-PA-01, HFW-MA-01 and HFW-TA-01wireless detectors3. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryHFW-BSB-01 Wireless type A audiovisual sounder base 928q/02Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 970Hz2. Warble 800/1000/1Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. Approved for use with HFW-PA-01, HFW-MA-01 and HFW-TA-01wireless detectors3. The Visual Warning part is not approved to EN 54-234. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryHFW-WSR-01 Wireless type A wall sounder 928q/03Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz2. The device must be used with the following batteries only:434 18 Jan 2014

Certificated ProductsCR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryPART 1: SECTION 7ALARM WARNING DEVICESLPCB Ref.No.HFW-SBR-01 Wireless type A audiovisual wall sounder 928q/04Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. The Visual Warning part is not approved to EN 54-233. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryHFW-WSR-02 Wireless type A Dutch tone wall sounder 928q/05Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Slow whoop 500-1200Hz3. Sweep (DIN) 1200-500Hz2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryHFW-WSW-01 Wireless type A wall sounder white colour 928q/06Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryHFW-SBW-01 Wireless type A audiovisual wall sounder white colour 928q/07Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Dual tone 990/650/2Hz3. Slow whoop 500-1200Hz4. Sweep (DIN) 1200-500Hz2. The Visual Warning part is not approved to EN 54-233. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryHFW-WSW-02 Wireless type A Dutch tone wall sounder white colour 928q/08Notes:1. Meets the requirements of EN54-3 at the following tones:-1. Continuous 990Hz2. Slow whoop 500-1200Hz3. Sweep (DIN) 1200-500Hz2. The device must be used with the following batteries only:CR123A (3 Vdc) - main batteryCR123A (3 Vdc) - secondary batteryDetectors:HFW-PA-01HFW-MA-01HFW-TA-01Wireless optical smoke detectorWireless multi-criteria detectorWireless heat detector18 Jan 2014 435

PART 1: SECTION 7ALARM WARNING DEVICESSystem Sensor EuropeKAC House, Thornhill Road, North Moons Moat, Redditch, Worcestershire B98 9ND, United KingdomTel: +44 (0)1527 406700 • Fax: +44 (0)1527 406699Website: www.systemsensoreurope.comCertificate No: 166c to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificate No: 166d to EN 54-3 + A1: 2002 + A2: 2006 and EN 54-17:2005Certificated ProductsLPCB Ref.No.WMSST-XX-P01 Intelligent wall mounted sounder strobe 166c/09Notes:1) xx indicates body colour. R=Red, W=Bright White2) xx indicates lens colour. R=Red, A=Amber, G=Green, B=Blue, C=ClearMeets the requirements of EN54-3 for all tones and output levels at voltage range 15-32v.WMSOU-XX-P01 Intelligent wall mounted sounder 166c/10Note:1) xx indicates body colour. RR=Red, WW=Bright WhiteMeets the requirements of EN54-3 for all tones and output levels at voltage range 15-32v.IBSST-XX-P01 Intelligent integrated detector base sounder strobe 166c/11Notes:1) xx indicates body colour. R=Red, W=Bright White, D=Detector White, K=Black2) xx indicates lens colour. R=Red, A=Amber, G=Green, B=Blue, C=ClearMeets the requirements of EN54-3 for all tones at voltage range 15-32v with theexception of Tones 4, 10, 11, 17 and 20 which are approved at maximum volume only.IBSOU-XX-P01 Intelligent integrated detector base sounder 166c/12Note:1) xx indicates body colour. RR=Red, WW=Bright White, DD=Detector White, KK=BlackWMSST-XX-P02 Intelligent wall mounted sounder strobe with short circuit isolator 166d/01Notes:1) xx indicates body colour. R=Red, W=Bright White2) xx indicates lens colour. R=Red, A=Amber, G=Green, B=Blue, C=ClearMeets the requirements of EN54-3 for all tones and output levels at voltage range 15-32v.WMSOU-XX-P02 Intelligent wall mounted sounder with short circuit isolator 166d/02Note:1) xx indicates body colour. RR=Red, WW=Bright White.Meets the requirements of EN54-3 for all tones and output levels at voltage range 15-32v.IBSST-XX-P02 Intelligent integrated detector base sounder strobe with short circuit isolator 166d/03Notes:1) xx indicates body colour. R=Red, W=Bright White, D=Detector White, K=Black2) xx indicates lens colour. R=Red, A=Amber, G=Green, B=Blue, C=ClearMeets the requirements of EN-54-3 for all tones at voltage range 15-32v with theexception of Tones 4, 10, 11, 17 and 20, which are approved at maximum volume only.IBSOU-XX-P02 Intelligent integrated detector base sounder with short circuit isolator 166d/04Note:1) xx indicates body colour. RR=Red, WW=Bright White, DD=Detector White, KK=BlackMeets the requirements of EN-54-3 for all tones at voltage range 15-32v with theexception of Tones 4, 10, 11, 17 and 20, which are approved at maximum volume only.WMSST-RR-P30 Intelligent wall mounted sounder strobe 166d/07Note:1) Meets the requirements of EN54-3 for all tones and output levels at voltagerange 15-28v.IBSST-DR-P30 Intelligent integrated detector base sounder strobe. 166d/08Notes:1) Meets the requirements of EN54-3 for all tones at voltage range 15-32v withthe exception of Tones 4, 10, 11, 17 and 20, which are approved at maximum volumeonly.WMSST-RR-P29 Intelligent wall mounted sounder strobe 166c/35Meets the requirements of EN54-3 for all tones and output levels at voltage range 15-32v.IBSST-DR-P29 Intelligent integrated detector base sounder strobe. 166c/36Meets the requirements of EN54-3 for all tones at voltage range 15-32v with theexception of Tones 4, 10, 11, 17 and 20 which are approved at maximum volume only.436 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESSystem Sensor Europe, Life Safety Distribution AGWeiherallee 11a, 8610, Uster, SwitzerlandTel: +41 44 943 4424 • Fax: +41 44 943 4399E-mail: sse.marketing@systemsensor.com • Website: www.systemsensoreurope.comCertificate No: 166h-(cl-1) to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificate No: 166j-(cl-1) to EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005Audible Warning DevicesCertificated ProductsWSO-xx-NyyWSS-xx-NyyAnalogue addressable Type A/B wall mounted sounder(B501AP-cc, Bcc, Wcc bases)Notes:1. xx indicates body colour. PR =Red, PP =Pure White2. yy indicates customer and associated communication protocol.01 indicates Advanced Protocol (and Honeywell 500 series protocol)00 and 02-99 indicates Advanced Protocol (and System Sensor 500 seriesprotocol)3. Meets the requirements of EN54-3 for all output levels at voltage range 15-32VDCand tones:1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;12) 420Hz, 0.625s on, 0.625 sec off; 13) 500-1200Hz, 0.25 sec off, 3.75 secon;14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;18) 970, 1Hz 500ms on, 500ms off;19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;20) 800Hz; 21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;24) 500 - 1200Hz, (0.5s off, 3.5s on);25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;29) 500 - 1000, 7Hz;30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.4. Approved as Type B only when used with Wcc base.Analogue addressable Type A/B wall mounted sounder/strobe(B501AP-cc, Bcc, Wcc bases)Notes:1. xx indicates body/lens colour. PR =Red/Red, PA =Amber/Amber, PC =Clear/Clear2. yy indicates customer and associated communication protocol.01 indicates Advanced Protocol (and Honeywell 500 series protocol)00 and 02-99 indicates Advanced Protocol (and System Sensor 500 seriesprotocol)3. Meets the requirements of EN54-3 for all output levels at voltage range 15-32VDCand tones:1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;12) 420Hz, 0.625s on, 0.625 sec off; 13) 500-1200Hz, 0.25 sec off, 3.75 secon;14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;18) 970, 1Hz 500ms on, 500ms off;19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;20) 800Hz; 21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;24) 500 - 1200Hz, (0.5s off, 3.5s on);25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;29) 500 - 1000, 7Hz;30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.4. Certification excludes the strobe function.LPCB Ref.No.166h/01166h/0218 Jan 2014 437

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsBSO-xx-NyyBSS-xx-NyyWSO-xx-Iyy5. Approved as Type B only when used with Wcc base.Analogue addressable Type A integrated detector base sounder(B501AP-cc, Bcc and Wcc bases)Notes:1. xx indicates body colour. PP =Pure White, DD =Detector White2. yy indicates customer and associated communication protocol.01 indicates Advanced Protocol (and Honeywell 500 series protocol)00 and 02-99 indicates Advanced Protocol (and System Sensor 500 seriesprotocol)3. Meets the requirements of EN54-3 for all output levels at voltage range 15-32VDC andtones:1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;12) 420Hz, 0.625s on, 0.625 sec off; 13) 500-1200Hz, 0.25 sec off, 3.75 secon;14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;18) 970, 1Hz 500ms on, 500ms off;19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;20) 800Hz; 21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;24) 500 - 1200Hz, (0.5s off, 3.5s on);25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;29) 500 - 1000, 7Hz;30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.Analogue addressable Type A integrated detector base sounder/strobe(B501AP-cc, Bcc and Wcc bases)Notes:1. xx indicates body/lens colour. PR =Pure White/Red,PA =Pure White/Amber, PC =Pure White/Clear, DR =Detector White/Red,DA =Detector White/Amber, DC =Detector White/Clear2. yy indicates customer and associated communication protocol.01 indicates Advanced Protocol (and Honeywell 500 series protocol)00 and 02-99 indicates Advanced Protocol (and System Sensor 500 seriesprotocol)3. Meets the requirements of EN54-3 for all output levels at voltage range 15-32VDCand tones:1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;12) 420Hz, 0.625s on, 0.625 sec off; 13) 500-1200Hz, 0.25 sec off, 3.75 secon;14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;18) 970, 1Hz 500ms on, 500ms off;19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;20) 800Hz; 21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;24) 500 - 1200Hz, (0.5s off, 3.5s on);25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;29) 500 - 1000, 7Hz;30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.4. Certification excludes the strobe function.Analogue addressableType A/B wall mounted sounder with short circuit isolator(B501AP-cc, Bcc bases, and Wcc bases)Notes:1. xx indicates body colour. PR =Red, PP =Pure White2. yy indicates customer and associated communication protocol.01 indicates Advanced Protocol (and Honeywell 500 series protocol)00 and 02-99 indicates Advanced Protocol (and System Sensor 500 seriesprotocol)3. Meets the requirements of EN54-3 for all output levels at voltage range 15-29VDCand tones:1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;LPCB Ref.No.166h/03166h/04166j/01438 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsWSS-xx-IyyBSO-xx-Iyyon;7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;12) 420Hz, 0.625s on, 0.625 sec off; 13) 500-1200Hz, 0.25 sec off, 3.75 sec14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;18) 970, 1Hz 500ms on, 500ms off;19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;20) 800Hz; 21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;24) 500 - 1200Hz, (0.5s off, 3.5s on);25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;29) 500 - 1000, 7Hz;30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.4. Approved as Type B only when used with Wcc base.Analogue addressable Type A/B wall mounted sounder/strobe with short circuit isolator(B501AP-cc, Bcc bases, and Wcc bases)Notes:1. xx indicates body/lens colour. PR =Red/Red, PA =Amber/Amber, PC =Clear/Clear2. yy indicates customer and associated communication protocol.01 indicates Advanced Protocol (and Honeywell 500 series protocol)00 and 02-99 indicates Advanced Protocol (and System Sensor 500 seriesprotocol)3. Meets the requirements of EN54-3 for all output levels at voltage range 15-29VDCand tones:1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;12) 420Hz, 0.625s on, 0.625 sec off; 13) 500-1200Hz, 0.25 sec off, 3.75 secon;14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;18) 970, 1Hz 500ms on, 500ms off;19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;20) 800Hz; 21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;24) 500 - 1200Hz, (0.5s off, 3.5s on);25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;29) 500 - 1000, 7Hz;30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.4. Certification excludes the strobe function.5. Approved as Type B only when used with Wcc base.Analogue addressable Type A integrated detector base sounder with short circuit isolator(B501AP-cc, Bcc and Wcc bases)Notes:1. xx indicates body colour. PP =Pure White, DD =Detector White2. yy indicates customer and associated communication protocol.01 indicates Advanced Protocol (and Honeywell 500 series protocol)00 and 02-99 indicates Advanced Protocol (and System Sensor 500 seriesprotocol)3. Meets the requirements of EN54-3 for all output levels at voltage range 15-29VDC andtones:1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;12) 420Hz, 0.625s on, 0.625 sec off; 13) 500-1200Hz, 0.25 sec off, 3.75 secon;14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;18) 970, 1Hz 500ms on, 500ms off;19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;20) 800Hz; 21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;24) 500 - 1200Hz, (0.5s off, 3.5s on);25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;LPCB Ref.No.166j/02166j/0318 Jan 2014 439

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsBSS-xx-Iyy29) 500 - 1000, 7Hz;30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.Analogue addressable Type A integrated detector base sounder/strobe with short circuitisolator(B501AP-cc, Bcc and Wcc bases)Notes:1. xx indicates body/lens colour. PR =Pure White/Red,PA =Pure White/Amber, PC =Pure White/Clear, DR =Detector White/Red,DA =Detector White/Amber, DC =Detector White/Clear2. yy indicates customer and associated communication protocol.01 indicates Advanced Protocol (and Honeywell 500 series protocol)00 and 02-99 indicates Advanced Protocol (and System Sensor 500 seriesprotocol)3. Meets the requirements of EN54-3 for all output levels at voltage range 15-29VDCand tones:1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;12) 420Hz, 0.625s on, 0.625 sec off; 13) 500-1200Hz, 0.25 sec off, 3.75 secon;14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;18) 970, 1Hz 500ms on, 500ms off;19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;20) 800Hz; 21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;24) 500 - 1200Hz, (0.5s off, 3.5s on);25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;29) 500 - 1000, 7Hz;30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.4. Certification excludes the strobe function.LPCB Ref.No.166j/04BasesB501AP-ccBccWccLow profile base IP21C, cc indicates colour, Blank=Pure White, IV=Detector WhiteDeep base IP44, cc indicates colour, RR=Red, DD=Detector White, PW=Pure WhiteWaterproof base IP65, cc indicates colour, RR=Red, DD=Detector White, PW=Pure WhiteTeledata S.r.l.Via Giulietti 8, Milan 20132, ItalyTel: +39 02-27201352 • Fax: +39 02-2593704E-mail: info@teledata-i.com • Website: www.teledate-i.comCertificate No: 928g-(cl-6) to EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005Certificated ProductsFDS100Analogue addressable Type A sounder with short circuit isolatorNotes:1) Meets the requirements of EN 54-3 at the following tone settings: Dual tone: 990 and 650Hz, 2Hz (250ms-250ms) Pulsed tone: 990Hz, 1Hz (500ms ON - 500ms OFF) Continuous tone: 990Hz, steadyLPCB Ref.No.928g/01440 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESTexecom LtdBradwood Court, St Crispin Way, Haslingden, Lancashire BB4 4PW, United KingdomTel: +44 (0)1706 220460 • Fax: +44 (0)1706 230692E-mail: sales@texe.com • Website: http://www.texe.comCertificate No: 717a to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificate No: 717d to EN 54-23: 2010 & EN 54-3: 2001 + A1: 2002 + A2: 2006Certificate No: 717e to EN54-23: 2010Certificated ProductsPSS-0068PSS-0079PSS-0073PSS-0080PSS-0084PSS-0089Conventional Sounder with LED Strobe (Red Head / Red Base)(PSO-0001, PSO-0006, PSO-0003 & PSO-0007 bases)Notes:1. The above sounder is Type A when used the with the shallow base & Type Bwhen used with the deep base only2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13Conventional Sounder with LED Strobe (Red Head / White Base)PSO-0003 & PSO-0007 bases)Notes:1. The above sounder is Type A when used the with the shallow base & Type Bwhen used with the deep base only2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13Conventional Sounder with LED Strobe (Amber Head / Red Base)PSO-0003 & PSO-0007 bases)Notes:1. The above sounder is Type A when used the with the shallow base & Type Bwhen used with the deep base only2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13Conventional Sounder with LED Strobe (Amber Head / White Base)(PSO-0001, PSO-0006, PSO-0003 & PSO-0007 bases)Notes:1. The above sounder is Type A when used the with the shallow base & Type Bwhen used with the deep base only2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13Conventional Sounder (Red)(PSO-0001, PSO-0006, PSO-0003 & PSO-0007 bases)Notes:1. The above sounder is Type A when used the with the shallow base & Type Bwhen used with the deep base only2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13Conventional Sounder (White)(PSO-0001, PSO-0006, PSO-0003 & PSO-0007 bases)Notes:1. The above sounder is Type A when used the with the shallow base & Type Bwhen used with the deep base only2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13LPCB Ref.No.717a/01717a/02717a/03717a/04717a/05717a/06PBS-0003 Universal base sounder (White) 717a/07Notes:1. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13PBS-0009 Universal base sounder (Cream) 717a/08Notes:1. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13PSC-0045Conventional Sounder with LED Strobe Common Operation(Red Head / Red Base)(PSO-0001, PSO-0006, PSO-0003 & PSO-0007 bases)Notes:1. The above sounder is Type A when used the with the shallow base & Type Bwhen used with the deep base only717a/1018 Jan 2014 441

PART 1: SECTION 7ALARM WARNING DEVICESCertificated Products2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13LPCB Ref.No.PSC-0051Conventional Sounder with Red LED Strobe Common Operation(Clear Lens / White Base)(PSO-0001, PSO-0006, PSO-0003 & PSO-0007 bases)Notes:1. The above sounder is Type A when used the with the shallow base & Type Bwhen used with the deep base only2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13717a/11PSC-0054PSC-0055Conventional Sounder with LED Strobe Common Operation(Amber Head / Red Base)(PSO-0001, PSO-0006, PSO-0003 & PSO-0007 bases)Notes:1. The above sounder is Type A when used the with the shallow base & Type Bwhen used with the deep base only2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13Conventional Sounder with Red LED Strobe (Clear Lens / White Base)(PSO-0001, PSO-0006, PSO-0003 & PSO-0007 bases)Notes:1. The above sounder is Type A when used the with the shallow base & Type Bwhen used with the deep base only2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13717a/12717a/13PBS-0015 Universal base sounder (Red) 717a/14Notes:1. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13PSC-0062PSC-0063Conventional Sounder with LED Strobe Common Operation(Red Head / White Base)(PSO-0001, PSO-0006, PSO-0003 & PSO-0007 bases)Notes:1. The above sounder is Type A when used the with the shallow base & Type Bwhen used with the deep base only2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13Conventional Sounder with LED Strobe Common Operation(Amber Head / White Base)(PSO-0001, PSO-0006, PSO-0003 & PSO-0007 bases)Notes:1. The above sounder is Type A when used the with the shallow base & Type Bwhen used with the deep base only2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13717a/16717a/17ESCA3000RESCA3000WESCA4000RConventional Type A sounder and ceiling mounted white light LED visual alarm device(red head / red base)- (PSO-0001 / 18- 185856-2, PSO-0017 / HSG6918 bases)Notes:1. The sounder meets the requirements of EN 54-3:2001 at tones 1, 2, 3, 6, 7 & 132. The ceiling mounted VAD meets the requirements of EN 54-23:2010 for the following:- Category C-3-15- Flash rates 0.5Hz and 1Hz- SynchronizationConventional Type A sounder and ceiling mounted white light LED visual alarm device(white head / white base)- (PSO-0006 / 18-186049-2, PSO-0018 / HSG6917 bases)Notes:1. The sounder meets the requirements of EN 54-3:2001 at tones 1, 2, 3, 6, 7 & 132. The ceiling mounted VAD meets the requirements of EN 54-23:2010 for the following:- Category C-3-15- Flash rates 0.5Hz and 1Hz- SynchronizationConventional Type A sounder and wall mounted white light LED visual alarm device (redhead / red base)- (PSO-0001 / 18-185856-2, PSO-0017 / HSG6918 bases)Notes:1. The sounder meets the requirements of EN 54-3:2001 at tones 1, 2, 3, 6, 7 & 13717d/01717d/02717d/03442 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated Products2. The wall mounted VAD meets the requirements of EN 54-23:2010 for the following:- Category W-3.1-11.3- Flash rates 0.5Hz and 1Hz- SynchronizationESCA4000WConventional Type A sounder and wall mounted white light LED visual alarm device(white head / white base)- (PSO-0006 / 18-186049-2, PSO-0018 / HSG6917 bases)Notes:1. The sounder meets the requirements of EN 54-3:2001 at tones 1, 2, 3, 6, 7 & 132. The wall mounted VAD meets the requirements of EN 54-23:2010 for the following:- Category W-3.1-11.3- Flash rates 0.5Hz and 1Hz- SynchronizationESBA3000R Conventional Type A/B ceiling mounted white light LED visual alarm device (red head /red bases)- (PSO-0001 / 18-185856-2, PSO-0017 / HSG6918 bases)Notes:1. The VAD is Type A when used with the shallow base & Type B with the deep base.2. The ceiling mounted VAD meets the requirements of EN 54-23:2010 for the following:- Category C-3-15- Flash rates 0.5Hz and 1Hz- SynchronizationESBA3000W Conventional Type A/B ceiling mounted white light LED visual alarm device (white head /white bases)- (PSO-0006 / 18-186049-2, PSO-0018 / HSG6917 bases)Notes:1. The VAD is Type A when used with the shallow base & Type B with the deep base.2. The ceiling mounted VAD meets the requirements of EN 54-23:2010 for the following:- Category C-3-15- Flash rates 0.5Hz and 1Hz- SynchronizationESBA4000RConventional Type A/B wall mounted white light LED visual alarm device (red head / redbases)- (PSO-0001 / 18-185856-2, PSO-0017 / HSG6918 bases)Notes:1. The VAD is Type A when used with the shallow base & Type B with the deep base.2. The wall mounted VAD meets the requirements of EN 54-23:2010 for the following:- Category W-3.1-11.3- Flash rates 0.5Hz and 1Hz- SynchronizationESBA4000W Conventional Type A/B wall mounted white light LED visual alarm device (white head /white bases)- (PSO-0006 / 18-186049-2, PSO-0018 / HSG6917 bases)Notes:1. The VAD is Type A when used with the shallow base & Type B with the deep base.2. The wall mounted VAD meets the requirements of EN 54-23:2010 for the following:- Category W-3.1-11.3- Flash rates 0.5Hz and 1Hz- SynchronizationLPCB Ref.No.717d/04717e/01717e/02717e/03717e/04Bases:PSO-0001 Shallow base (red)PSO-0006 Shallow base (white)PSO-0003 Deep base (red)PSO-0007 Deep base (white)PSO-0001 / 18-185856-2PSO-0017 / HSG6918PSO-0006 / 18-186049-2PSO-0018 / HSG6917Red shallow baseRed deep baseWhite shallow baseWhite deep base18 Jan 2014 443

PART 1: SECTION 7ALARM WARNING DEVICESThorn Security Limited, trading as Tyco Safety ProductsDunhams Lane, Letchworth SG6 1BD, United KingdomTel: +44 (0)1462 667700 • Fax: +44 (0)1462 667777E-mail: mashbury@tycoint.com • Website: www.tycosafetyproducts-europe.comCertificate No: 681g-(cl-1) to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificate No: 378e to EN 54-3: 2001 & EN 54-17: 2005Certificated ProductsLPCB Ref.No.802SB Analogue addressable type A sounder base 681g/01Notes:1. Meets the requirements of EN 54-3 at the following tones:Fast SweepDutch Slow Whoop 500Hz to 1200HzTemporal 3 880Hz601SB Conventional type A sounder base 681g/02Notes:1. Meets the requirements of EN 54-3 at the following tones:Temporal 3 880HzDutch Slow Whoop 500Hz to 1200HzContinuous 880Hz601SBD Conventional type A diode sounder base 681g/03Notes:1. Meets the requirements of EN 54-3 at the following tones:Temporal 3 880HzDutch Slow Whoop 500Hz to 1200HzContinuous 880Hz602SB Conventional type A sounder base 681g/04Notes:1. Meets the requirements of EN 54-3 at the following tones:Temporal 3 880HzDutch Slow Whoop 500Hz to 1200HzContinuous 880Hz602SBD Conventional type A sounder base 681g/05Notes:1. Meets the requirements of EN 54-3 at the following tones:Temporal 3 880HzDutch Slow Whoop 500Hz to 1200HzContinuous 880Hz901SB Analogue addressable type A sounder base 681g/06Notes:1. Meets the requirements of EN 54-3 at the following tones:Temporal 3 880HzDutch Slow Whoop 500Hz to 1200HzContinuous 880Hz912SB Analogue addressable type A sounder base 681g/07Notes:1. Meets the requirements of EN 54-3 at the following tones:Temporal 3 880HzDutch Slow Whoop 500Hz to 1200HzContinuous 880Hz812SB Analogue addressable type A sounder base 681g/08Notes:1. Meets the requirements of EN 54-3 at the following tones:Temporal 3 880HzDutch Slow Whoop 500Hz to 1200HzContinuous 880HzLPSY800-R Symphoni MX addressable loop powered Type A sounder (red) with short circuit isolator 378e/01Notes:1. Meets the requirements of EN 54-3 at tones 1, 2, 6, 9.LPSY800-WSymphoni MX addressable loop powered Type A sounder (white) with short circuit 378e/02isolatorNotes:1. Meets the requirements of EN 54-3 at tones 1, 2, 6, 9.LPSY865 Symphoni MX addressable loop powered Type B sounder (red) with short circuit isolator 378e/03Notes:1. Meets the requirements of EN 54-3 at tones 1, 2, 6, 9.LPAV800-R Symphoni MX addressable loop powered Type A sounder beacon (red) with short circuit 378e/04444 18 Jan 2014

PART 1: SECTION 7ALARM WARNING DEVICESCertificated ProductsLPAV800-WLPAV865isolatorNotes:1. Meets the requirements of EN 54-3 at tones 1, 2, 6, 9.Symphoni MX addressable loop powered Type A sounder beacon (white) with shortcircuit isolatorNotes:1. Meets the requirements of EN 54-3 at tones 1, 2, 6, 9.Symphoni MX addressable loop powered Type B sounder beacon (red) with short circuitisolatorNotes:1. Meets the requirements of EN 54-3 at tones 1, 2, 6, 9.LPCB Ref.No.378e/05378e/06UTC Fire & Security Inc. Trading as Edwards Systems Technology8985 Town Center Parkway, Bradenton, Florida FL34202, USATel: 941 739-42228Website: www.fs.utc.comCertificate No: 262w to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificate No: 902a-(cl-1) to EN-54-3: 2001 + A1: 2002 + A2: 2006Certificated ProductsLPCB Ref.No.G1x-HD-E Genesis Temporal Horn 262w/02Notes:1. Approved with back boxes G1B-MP and 27193-162. Meets the requirements of EN 54-3 at all volumes and the following tones:-Continuous 3200HZ (interrupted at 40Hz)Temporal 3200Hz (interrupted at 40Hz); 2 pulses 0.5s on / 0.5s off,1 pulse 0.5s on / 1.5s off, repeat.3. x denotes housing coloursBlank = White housingR = Red housingF = White housing with Fire MarkingRF = Red housing with Fire Marking.G1x-HDVM-E Genesis Temporal Horn / Strobe 262w/03Notes:1. Approved with back boxes G1B-MP and 27193-162. Meets the requirements of EN 54-3 at all volumes and the following tones:-Continuous 3200HZ (interrupted at 40Hz)Temporal 3200Hz (interrupted at 40Hz); 2 pulses 0.5s on / 0.5s off,1 pulse 0.5s on / 1.5s off, repeat.3. x denotes housing coloursBlank = White housingR = Red housingF = White housing with Fire MarkingRF = Red housing with Fire Marking.SIGA-AB4G Analogue addressable Type A sounder base 902a/01Notes:1. Certified for used with fire detector modelsSIGA-IPHSI, SIGA-PHSI, SIGA-PSI,SIGA-IS and SIGA-HRSI.2. Meets the requirements of EN 54-3 with Steady and Temporal tones, and operatingvoltages from 16-33 VDC.3. Certified for use with AB4G-SB surface mounting box.AncillariesG1B-MP Back box G1 series, white27193-16 Back box, surface whiteAB4G-SB Surface mounting box18 Jan 2014 445

PART 1: SECTION 7ALARM WARNING DEVICESVimpex LimitedStar Lane, Great Wakering, Essex SS3 0PJ, United KingdomTel: +44 (0) 1702 216999 • Fax: +44 (0) 1702 216699E-mail: sales@vimpex.co.uk • Website: www.vimpex.co.ukCertificate No: 456a to EN 54-3: 2001 + A1: 2002 + A2: 2006Certificated ProductsLPCB Ref.No.MBF-6EV-24 6" (150mm) 24Vdc fire alarm bell with aluminium gong 692a/01MBF-8EV 8" (200mm) 24Vdc fire alarm bell with aluminium gong 692a/02MBA-6 + BBX.4 6" (150mm) fire alarm bell with aluminium gong complete with back box 692a/04MBA-8 + BBX.4 8" (200mm) fire alarm bell with aluminium gong complete with back box 692a/05Zeta Alarm Systems by GLT Exports LimitedDetection House, 72-78 Morfa Road, Swansea SA1 2EN, United KingdomTel: +44 (0)1792 455175 • Fax: +44 (0)1792 455176E-mail: ghassan@gltexports.com • Website: www.gltexports.comCertificate No: 692a-(cl-1) to EN 54-3: 2001 + A1: 2002Certificated ProductsLPCB Ref.No.ZTB6B/24 - 41-003 6" (150mm) 24Vdc fire alarm bell with aluminium gong 692a/01ZTB8B - 41-005 8" (200mm) 24Vdc fire alarm bell with aluminimum gong 692a/02ZTB6B/WP - 41-003A 6" (150mm) fire alarm bell with aluminium gong complete with back box. 692a/04ZTB8B/WP - 41-006 8" (200mm) fire alarm bell with aluminium gong complete with back box. 692a/05446 18 Jan 2014

PART 1: SECTION 8FIRE RESISTANT CABLESThis section lists fire resistant cables for use in fire safety, fire detection and fire alarm systems and otherapplications where specifications require cables with specific performance in the event of a fire.BS 5839-1:2013 Fire detection and fire alarm systems for buildings. Code of practice for systemdesign, installation, commissioning and maintenanceBS 5839-1:2013 includes requirements for fire resistant cables for fire detection and alarm systems. It callsfor ‘Standard’ and ‘Enhanced’ fire resistant cables and defines the requirements for these in Clause 26.2.These cables have to comply with BS EN 60702-1 (with a polymeric sheath), BS 7629-1 or BS 7846.‘Standard’ fire resisting cables also have to:a) achieve at least Class PH30 when tested in accordance with EN 50200:2006.andb) maintain circuit integrity when exposed to a special flame / mechanical shock / water spray sequenceequivalent to achieving a duration of 30 minutes when tested in accordance with EN 50200:2006Annex E.‘Enhanced’ fire resisting cables also have to:a) achieve a 120 minute survival when tested in accordance with EN 50200:2006,andb) maintain circuit integrity when exposed to a special flame / mechanical shock / water spray sequenceequivalent to achieving a duration of 120 minutes when tested in accordance with BS 8434-2:2003+A2:2009.Only cables complying with these requirements are listed as ‘Standard’ or ‘Enhanced’ under BS 5839-1,Clause 26.2.BS 8519:2010 Selection and installation of fire-resistant power and control cable systems for lifesafety and fire-fighting applications - Code of practiceBS 8519:2010 gives guidance and recommendations on the selection and installation of power and controlcable systems which are required to maintain their circuit integrity for life safety and fire-fighting applications. Italso gives specific recommendations for electrical system design for such applications, and recommendedlimits for survival times.Category 1: means of escape (30 min fire survival time).• power cables of 20 mm overall diameter and above meeting the 30 min survival time when tested inaccordance with BS 8491, or• control cables meeting the PH30 classification when tested in accordance with EN 50200:2006, andthe 30 min survival time when tested in accordance with Annex E of that standardCategory 2: means of escape (60 min fire survival time).• power cables of 20 mm overall diameter and above meeting the 60 min survival time when tested inaccordance with BS 8491 or• control cables meeting the PH60 classification when tested in accordance with EN 50200:2006, andthe 120 min survival time when tested in accordance with BS 8434-2:2003+A2:2009Category 3: fire-fighting (120 min fire survival time).• power cables of 20 mm overall diameter and above meeting the 120 min survival time when tested inaccordance with BS 8491, or• control cables meeting the PH120 classification when tested in accordance with EN 50200:2006, andthe 120 min survival time when tested in accordance with BS 8519 Annex B.18 Jan 2014 447

PART 1: SECTION 8FIRE RESISTANT CABLESBuilding Regulations 2010 - Fire Safety - Approved Document BThe Building Regulations 2010 - Fire Safety - Approved Document B - Volume 2 - Buildings other thandwelling houses defines a protected power circuit to be able to continue to function during a fire. A protectedcircuit for operation of equipment in the event of fire should consist of a cable meeting at least therequirements of PH30 when tested in accordance with EN 50200. Larger or complex buildings may requirefire protection systems to operate for extended periods during fire and guidance on such systems is given inBS 5839-1, BS 5266-1 and BS 8491 (BS 7346-6).Other Standards UsedThe other standards and test methods currently used for certification are listed below. This list includes some"withdrawn" standards. Where possible, these will be replaced by the superseding standards when certificatesare renewed. However, where withdrawn standards are called up by current standards, certification to thewithdrawn standard may need to be maintained until the calling standard is amended to remove the reference:- BS 6387:1994 Performance requirements for cables required to maintain circuit integrity under fireconditions- BS 7629-1:1997 Thermosetting insulated cables with limited circuit integrity when affected by fire. Part 1:Multicore cables- BS 7629-1:1997 (Incorporating Amendment Nos.1 and 2) Thermosetting insulated cables with limitedcircuit integrity when affected by fire. Part 1: Multicore cables (The provisions introduced by amendmentNo.1: 2004 are effective from 1st April 2004)- BS 7629-1:2008 Electric cables - Specification for 300/500 V fire resistant screened cables having lowemission of smoke and corrosive gases when affected by fire - Part 1: Multicore and multipair cables- BS 7846:2000 Electric cables 600/1000V armoured fire-resistant cables having thermosetting insulationand low emission of smoke and corrosive gases when affected by fire- BS 7846:2009 Electric cables - Thermosetting insulated, armoured, fire - resistant cables of rated voltage600/1 000 V, having low emission of smoke and corrosive gases when affected by fire - Specification- BS 8434-2:2003+A2:2009 Method of test for assessment of the fire integrity of electric cables - Part 2: testfor unprotected small cables for use in emergency circuits- BS EN 50200 with a 930°C flame and withwater spray- BS 8491:2008 Method for assessment of fire integrity of large diameter power cables for use ascomponents for smoke and heat control systems and other certain active fire safety systems- BS 8519:2010 Selection and installation of fire-resistant power and control cable systems for life safetyand fire-fighting applications - Code of practice- EN 50200:2006 Method of test for resistance to fire of unprotected small cables for use in emergencycircuits- EN 50267-2-1:1999 Common test method for cables under fire conditions- tests on gases evolved duringcombustion of materials from cables - procedures - Determination of the amount of halogen acid gas- EN 50267-2-3:1999 Common test methods for cables under fire conditions - Tests on gases evolvedduring combustion of materials from cables - Procedure 2-3: Procedures - Determination of degree ofacidity of gases for cables by determination of the weighted average of pH and conductivity- EN 60332-3:2009 Tests on electric and optical fibre cables under fire conditions - Part 3: Test for verticalflame spread of vertically mounted bunched wires or cables- EN 60702-1:2002 Mineral insulated cables and their terminations with rated voltage not exceeding 750V -Part 1: Cables- EN 61034-2: 2005 Measurement of smoke density of cables burning under defined conditions- IEC 60331-1:2009 - Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test methodfor fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including0,6/1,0kV and with an overall diameter exceeding 20mm.- IEC 60331-2:2009 - Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test methodfor fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including0,6/1,0kV and with an overall diameter not exceeding 20mm.- IEC 60331-21:1999 Tests for electric cables under fire conditions - Circuit integrity - Part 21 Procedureand requirements - Cables of rated voltage up to and including 0,6/1,0kV- IEC 60332-3:2009 Tests on electric cables under fire conditions - Part 3: Tests on bunched wires orcables- IEC 60754-1:2011 Tests on gases evolved during combustion of materials from cables - Part 1:Determination of the amount of halogen acid gas448 18 Jan 2014

PART 1: SECTION 8FIRE RESISTANT CABLES- IEC 60754-2:2011 Tests on gases evolved during combustion of materials from cables - Part 2:Determination of acidity (by pH measurement) and conductivity- IEC 61034-2:2005 Measurement of smoke density of cables burning under defined conditionsNotes:1) The rated voltages Uo/U recognised for BS 6387:1994 are, 300/500V and 450/750V, and for BS 7629-1are 300/500V, where Uo is the power-frequency voltage to earth and U is the power-frequency voltagebetween conductors.2) Testing of single core cable to BS 6387:1994 is not recognised by the standard. This is because itrequires the cable to have at least two metallic elements. Therefore LPCB approval of single core cable isbased on the cable being tested in a stainless steel conduit.3) All BS 6387 approvals must include EN 50267-2-1 (acid gas) and EN 61034-2 (smoke density) testing4) MICC Cables approved to BS 5839-1:2002+A2:2008 Clause 26.2 must be sheathed with an overallpolymeric covering.5) EN 50200:2006 Annex E and BS 8434-2:2003+A2:2009 provide methods of test that meet therequirements for a special flame / mechanical shock / water spray sequences described in BS 5839-1:2013, Clause 26.2 d) and e), respectively.6) BS 8491 does not cover cables with a voltage rating that exceeds 600/1000V or where the external cablediameter is less than 20mm.7) BS 8519 standard covers both Power and Control cables; different test methods apply to each cable type.Control cables up to & including 4.0mm 2 can be approved to BS 8519.2M KABLO SAN. ve TIC. A.S.Sancaktepe Mahallesi, Sokak No: 8, 34580 Silivri, Istanbul, TurkeyTel: +90 212 672 7314 • Fax: +90 212 672 7312E-mail: info@2mkablo.com • Website: www.2mkablo.comCertificate No: 711a to BS 6387: 1994 and BS EN 50200: 2006 Class PH120FireKab BMK-SH FE 180Nominal csa ofCore ConstructionBS 6387 BS EN 50200 LPCB Ref. No.conductors (mm 2 )(excluding drain wire & earth)1.0 (1) 2, 3 & 4 C, W, Z Class PH120 711a/011.5 (1) 2, 3, 4, 5 & 7 C, W, Z Class PH1202.5 (1) 2, 3 & 4 C, W, Z Class PH120Uo/U 300/500 VNote:1) Solid conductor only.Certificate No: 711b to BS EN 50200: 2006 Class PH120FireKab JE-H(ST)H...BD FE 180 E30-E90Nominal csa ofCore ConstructionBS EN 50200LPCB Ref. No.conductors (mm²)(excluding earth wire)0.50 (1, 2) 1, 2, 4, 8, & 12 pairs Class PH120 711b/011.50 (1) 1 & 2 pairs Class PH120Uo/U 175/300VNotes:1) Solid conductor only.2) External diameter of this conductor is 0.80mm.Certificate No: 711c to BS 6387: 1994 and BS EN 50200: 2006 Class PH3018 Jan 2014 449

PART 1: SECTION 8FIRE RESISTANT CABLESFireKab NGF FE 180 PH30Nominal csa ofCore ConstructionBS 6387 BS EN 50200 LPCB Ref. No.conductors (mm²)(excluding drain wire & earth)1.0 (1) 2, 3 & 4 C, W, Z Class PH30 711c/011.5 (1) 2, 3 & 4 C, W, Z Class PH302.5 (1) 2, 3 & 4 C, W, Z Class PH30Uo/U 300/500VNotes:1) Solid conductor only.3E - Electrical Energy Efficiency FZEPO Box 341084, Silicon Oasis, Dubai, United Arab EmiratesTel: +971 4 326 3950 • Fax: +971 4 326 3972E-mail: info@3edubai.com • Website: www.3edubai.comCertificate No: 568a-(cl-5) to BS 6387: 1994 and EN 50267-2-1: 1999APS FireNominal csaCore construction BS 6387 EN 50267-2-1LPCB Ref. No.of conductor (mm 2 )(outer covering)1.0 2, 3 & 4 C, W, Z

Firetec Single Core LSZHNominal csaCoreof conductor (mm 2 ) Construction(See note 1)BS 6387(see notes 2-4)BS EN 50267-1-1(outer covering)PART 1: SECTION 8FIRE RESISTANT CABLESIEC 60331-21(see notes 8 & 9)LPCB Ref. No.1.0 One C, W, Z (5)

PART 1: SECTION 8FIRE RESISTANT CABLESCertificate No: 221f to BS 7629-1: 2008, BS 5839-1: 2013 Clause 26.2e, EN 50200: 2006 Class PH120 and BS 8434-2:2003+A2:2009 120minFiretec Enhanced Multicore LSZHNominal csaCore Construction BS 7629-1 EN 50200 BS 8434-2 BS 5839-1 LPCB Ref. No.of conductor (mm 2 ) (excluding drain wire & earth)Clause 26.21.0 (1) 2, 3 & 4 Complies (3) Class PH120 120min (4) Enhanced (5) 221f/011.5 (1) 2, 3 & 4 Complies (3) Class PH120 120min (4) Enhanced (5)2.5 (1) 2, 3 & 4 Complies (3) Class PH120 120min (4) Enhanced (5)4.0 (2) 2, 3 & 4 Complies (3) Class PH120 120min (4) Enhanced (5)Uo/U 300/500VNotes:1. Solid conductor only.2. Stranded conductor only.3. In meeting the requirements of BS 7629-1: 2008, the Firetec Enhanced Multicore LSZH cables listed met the requirements of smokedensity of EN 61034-2: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl onthe insulation, binder tape & outer covering when tested in accordance with EN 50267-2-1: 1999.4. The duration of 120min when tested in accordance with BS 8434-2: 2003+A2: 2009 is achieved by 60min for the fire and impactphase and an additional 60min for the fire, impact and water phase.5. The Firetec Enhanced Multicore LSZH cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance withEN 50200: 2006 and met a duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met therequirements for an enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2013.Certificate No: 221h to BS 6387: 1994 and BS EN 60702-1: 2002Mineral Insulated Cable (light duty)Nominal csa ofCoreBS 6387 BS EN 60702-1 LPCB Ref. No.conductor (mm 2 )Construction1.0 2, 3, 4 & 7 C, W, Z Complies 221h/011.5 2, 3, 4 & 7 C, W, Z Complies2.5 2, 3, 4 & 7 C, W, Z Complies4.0 2 C, W, Z CompliesUo/U 300/500 VNote:1) The above range is certified in both Bare and Served constructions.Certificate No: 221h to BS 6387: 1994 and BS EN 60702-1: 2002Mineral Insulated Cable (single core)Nominal csa ofCoreBS 6387 BS EN 60702-1 LPCB Ref. No.conductor (mm 2 )Construction1.5 One C, W, Z Complies 221h/022.5 One C, W, Z Complies4.0 One C, W, Z Complies6.0 One C, W, Z Complies10 One C, W, Z Complies16 One C, W, Z Complies25 One C, W, Z Complies35 One C, W, Z Complies50 One C, W, Z Complies70 One C, W, Z Complies95 One C, W, Z Complies120 One C, W, Z Complies150 One C, W, Z Complies185 One C, W, Z Complies240 One C, W, Z Complies300 One C, W, Z Complies400 One C, W, Z CompliesUo 750V452 18 Jan 2014

PART 1: SECTION 8FIRE RESISTANT CABLESNotes:1) The above range is certified in both Bare and Served constructions.2) For cables with an outside diameter in excess of 20mm, the category Z tests were conducted in accordance with guidance from themanufacturer.Certificate No: 221h to BS 6387: 1994 and BS EN 60702-1: 2002Mineral Insulated Cable (heavy duty)Nominal csa ofCoreBS 6387 BS EN 60702-1 LPCB Ref. No.conductor (mm 2 )Construction1.5 2, 3, 4, 7, 12 & 19 C, W, Z Complies 221h/032.5 2, 3, 4, 7 & 12 C, W, Z Complies4.0 2, 3 & 4 C, W, Z Complies6.0 2, 3 & 4 C, W, Z Complies10 2, 3 & 4 C, W, Z Complies16 2, 3 & 4 C, W, Z Complies25 2, 3 & 4 C, W, Z CompliesUo/U 450/750VNotes:1) The above range is certified in both Bare and Served constructions.2) For cables with an outside diameter in excess of 20mm, the category Z tests were conducted in accordance with guidance from themanufacturer.Certificate No: 221k to BS 7846: 2009 Category F2Firetec PowerNominal csa ofCore ConstructionBS 7846LPCB Ref. No.conductor (mm 2 )(see note 1)1.5 2, 3, 4, 5, 7, 12, 19, 27, 37 & 48 F2 (2) 221k/012.5 2, 3, 4, 5, 7, 12, 19, 27, 37 & 48 F2 (2)4.0 2, 3, 4, 5, 7, 12, 19, 27, 37 & 48 F2 (2)6.0 2, 3, 4 & 5 F2 (2)10 2, 3, 4 & 5 F2 (2)16 2, 3, 4 & 5 F2 (2)Uo/U 600/1000VNotes:1. Stranded conductors only.2. In meeting the requirements of BS 7846: 2009 Category F2, the Firetec Power cables listed met the requirements for fire resistancecharacteristics Category CWZ specified in Clause 11 of BS 6387: 1994.Certificate No: 221n to BS EN 60702-1: 2002 and BS 6387: 1994AEI MI CABLE (LIGHT DUTY)Nominal csa of conductor (mm²) Core Construction BS EN 60702-1 BS 6387 LPCB Ref. No.1.0 (1,2) 2, 3, 4 & 7 Complies C,W,Z 221n/011.5 (1,2) 2, 3, 4 & 7 Complies C,W,Z2.5 (1,2) 2, 3, 4 & 7 Complies C,W,Z4.0 (1,2) 2 Complies C,W,ZUo/U 300/500VNotes:1) Solid conductor only2) The above cables are certified in Bare construction only.Certificate No: 221p to BS 60702-1: 2002, BS 6387: 1994, BS 5839-1: 2002+A2:2008 Clause 26.2e, BS EN 50200: 2006 ClassPH120, BS 8434-2: 2003+A2: 2009 120min, BS EN 50267-2-1: 199918 Jan 2014 453

PART 1: SECTION 8FIRE RESISTANT CABLESAEI MI CABLE (LIGHT DUTY)Nominal csa ofconductor(mm²)CoreconstructionBS EN60702-1 (seenote 3)BS6387BS EN502001.0 (1,2) 2, 3, 4 & 7 Complies C,W,Z ClassPH1201.5 (1,2) 2, 3, 4 & 7 Complies C,W,Z ClassPH1202.5 (1,2) 2, 3, 4 & 7 Complies C,W,Z ClassPH1204.0 (1,2) 2 Complies C,W,Z ClassPH120BS8434-2BS 5839-1Clause 26.2BS EN 50267-2-1 (outercovering)LPCBRef. No.120min Enhanced (4)

PART 1: SECTION 8FIRE RESISTANT CABLESNominal csa ofconductor (mm 2 )Core construction(See note 1)BS 784616 2, 3, 4 & 5 F2 (2)25 2, 3, 4 & 5 F2 (2)35 2, 3, 4 & 5 F2 (2)LPCB Ref. No.Uo/U 600/1000VNotes:1) Stranded conductors only.2) In meeting the requirements of BS 7846: 2009 Category F2, the ATOM Fire Barrier L cables listed met the requirements of smokedensity of BS EN 61034-2: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCIon the insulation, tapes, filler, bedding and outer covering when tested in accordance with BS EN 50267-2-1: 1999.Certificate No: 905b to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005 and IEC 60331-21: 1999ATOM Fire Barrier SNominal csa of Coreconductor construction(mm²)(See note 1)BS 6387(See notes 2 -4)BS EN 50267-2-1BS61034-2 IEC 60331-21(See Note 8)LPCB Ref.No.1.5 One C, W, Z (5) 60% Complies 905b/012.5 One C, W, Z (5) 60% Complies4.0 One C, W, Z (5) 60% Complies6.0 One C, W, Z (5) 60% Complies10 One C, W, Z (5) 60% Complies16 One C, W, Z (6,7) 60% Complies25 One C, W, Z (6,7) 60% Complies35 One C, W, Z (6,7) 60% Complies50 One C, W, Z (6,7) 60% Complies70 One C, W, Z (6,7) 60% Complies95 One C (7) 60% Complies120 One C (7) 60% Complies150 One C (7) 60% Complies185 One - 60% Complies240 One - 60% Complies300 One - 60% Complies400 One - 60% CompliesUo/U 600/1000VNotes:1) Stranded conductor only.2) Clauses 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core.3) These cables also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387.4) Where a single cable is fitted in a conduit, only phase to earth voltage was applied.5) To satisfy the requirement of BS 6387, testing for C, W & Z categories were conducted using a 20mm stainless steel conduit as theother metallic element.6) To satisfy the requirement of BS 6387, testing for W & Z categories were conducted using a 20mm stainless steel conduit as theother metallic element.7) To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the othermetallic element.8) These cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 950 o C and at a voltage rating of 600V.Certificate No: 905c to BS 7629-1:2008, BS 6387:1994, BS5839-1:2013 Clause 26.2d, EN 50200:2006 Class PH120 and EN50200:2006 Annex EATOM Fire Barrier MNominal csa ofconductor (mm²)Core Construction(excluding drain wireand earth)BS 7629-1BS6387EN 502001.0 2, 3 & 4 Complies C,W,Z ClassPH1201.5 2, 3 & 4 Complies C,W,Z ClassPH1202.5 2, 3 & 4 Complies C,W,Z ClassPH120EN50200AnnexEBS 5839-1Clause26.2LPCB Ref.No.30min Standard 905c/0130min30minStandardStandard18 Jan 2014 455

PART 1: SECTION 8FIRE RESISTANT CABLESNominal csa ofconductor (mm²)Core Construction(excluding drain wireand earth)BS 7629-1BS6387EN 502004.0 2, 3 & 4 Complies C,W,Z ClassPH120EN50200AnnexE30minBS 5839-1Clause26.2StandardLPCB Ref.No.Uo/U 300/500VNotes:1. Soldi conductor only.2. Stranded conductor only.3. In meeting the requiremetns of BS 7629-1:2008, the ATOM Fire Barrier M cables listed met the requirements of smoke denisty of EN61034-2:2005 and achieved less than 0.5%HCI on the insulation, binder tape & outer covering when tested in accordance with EN50267-2-1:1999.4. The duration of 30min when tested in accordance with EN 50200:2006 Annex E is achieved by 15min for the fire and impact phaseand an additional 15min for the fire, impact and water phase.5. The ATOM Fire Barrier M cables listed conform to BS 7629-1:2008, met Class PH20 when tested in accordance with EN 50200:2006and met the 30min duration when tested in accordance with EN 50200:2006 Annex E and hence met the requirements for a standardfire reistant calbe as described in Clause 26.2 of BS 5839-1:2013.Bahra Cables CompanyCPC Industrial Park, Bahra, Jeddah 21432, Kingdom of Saudi ArabiaTel: +966 25911115, (Toll Free) 8001248111 • Fax: +966 25915683E-mail: fsb@bahra-cables.com • Website: www.bahra-cables.comCertificate No: 1069a to BS 6387: 1994, IEC 60331-21: 1999, BS EN 50267-2-1: 1999, BS EN 50267-2-3: 1999 & BS EN 61034-2:2005FSB WiresNominal csa ofconductor (mm²)Core construction(See note 1)BS 6387(See notes2-3)BS EN50267-2-1BS EN50267-2-3BS EN61034-2IEC 60331-21note 7)LPCB Ref.No.2.5 One C, W, Z (4) 60% Complies 1069a/014.0 One C, W, Z (4) 60% Complies6.0 One C, W, Z (4) 60% Complies10 One C, W, Z (4) 60% Complies16 One C, W, Z (5,6) 60% Complies25 One C, W, Z (5,6) 60% Complies35 One C, W, Z (5,6) 60% Complies50 One C, W, Z (5,6) 60% Complies70 One C, W, Z (5,6) 60% Complies95 One C (6) 60% Complies120 One C (6) 60% Complies150 One C (6) 60% Complies185 One C (6) 60% Complies240 One C (6) 60% Complies300 One C (6) 60% Complies400 One C (4) 60% Complies500 One C (4) 60% CompliesUo/U 450/750VNotes:1) Stranded conductor only.2) Clauses 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core.3) Where a single cable is fitted in a conduit, only phase to earth voltage was applied.4) To satisfy the requirement of BS 6387, testing for C, W & Z categories was conducted using a 20mm stainless steel conduitas the other metallic element.5) To satisfy the requirement of BS 6387, testing for W & Z categories was conducted using a 20mm stainless steel conduitas the other metallic element.6) To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the othermetallic element.7) The FSB Wires cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 950ºC for a duration of180mins, at a voltage rating of 450V.456 18 Jan 2014

PART 1: SECTION 8FIRE RESISTANT CABLESCertificate No: 1069b to BS 7846:2009 Cat F2FSB CableNominal csa of conductor (mm²) Core construction (See note 1) BS 7846 LPCB Ref. No.4.0 2, 3 & 4 F2 1069b/016.0 2, 3 & 4 F210 2, 3 & 4 F216 2, 3 & 4 F225 2, 3 & 4 F235 2, 3 & 4 F250 2, 3 & 4 F270 2, 3 & 4 F295 2, 3 & 4 F2120 2, 3 & 4 F2150 2, 3 & 4 F2185 2, 3 & 4 F2240 2, 3 & 4 F2300 2, 3 & 4 F2Uo/U 600/1000VNotes:1. Stranded conductors only.2. In meeting the requirements to BS 7846:2009 Category F2, the FSB Cables listed met the requirements of smoke density of EN61034-2:2005, fire resistance requirements CWZ in Clause 11 of BS 6387:1994 and achieved less than 0.5%HCI on the insulationtapes, filler, bedding and outer covering when tested in accordance with EN 50267-2-1:1999.Bangkok Cable Co Limited93 Moo. 11 Suksawad Road, Naiklongbangplakod, Prasamutchedee, Samutprakarn, 10290, ThailandTel: +662 2544550 • Fax: +662 2543859Certificate No: 576a to BS 6387: 1994, BS EN 50267-2-1: 1999 and BS EN 61034-2: 2005450/750V Low smoke halogen free fire resistant cableNominal csa ofCoreBS 6387 BS EN 50267-2-1 BS EN 61034-2 LPCB Ref. No.conductor (mm 2 ) Construction(see note 1)(see note 2-4) (outer covering)1.5 One C, W, Z 60% 576a/012.5 One C, W, Z 60%4.0 One C, W, Z 60%6.0 One C, W, Z 60%10 One C, W, Z 60%16 One C, W, Z 60%25 One C, W, Z 60%35 One C, W, Z 60%50 One C, W, Z 60%70 One C, W, Z 60%95 One C, W, Z 60%120 One C, W, Z 60%150 One - 60%185 One - 60%240 One - 60%300 One - 60%400 One - 60%500 One - 60%630 One - 60%Uo/U 450/750VNotes:1) Stranded conductor only2) Clause 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core.18 Jan 2014 457

PART 1: SECTION 8FIRE RESISTANT CABLES3) Where a single cable is fitted in a conduit, only phase to earth voltage was applied.4) To satisfy the requirement of BS 6387, testing for C, W & Z categories were conducted using a 20mm stainless steel conduit as theother metallic element.Certificate No: 576a to BS 6387: 1984, BS EN 50267-2-1: 1999 and BS EN 61034-2: 2005600/1000V XLPE/Armoured/Low smoke halogen free fire resistant cableNominal csa ofCoreBS 6387 BS EN 50267-2-1 BS EN 61034-2 LPCB Ref. No.conductor (mm 2 ) Construction(see note 1)(see note 2) (outer covering)1.5 One, 2, 3 & 4 C, W, Z 60% 576a/022.5 One, 2, 3 & 4 C, W, Z 60%4.0 One, 2, 3 & 4 C, W, Z 60%6.0 One, 2, 3 & 4 C, W, Z 60%10 One, 2, 3 & 4 C, W, Z 60%16 One, 2, 3 & 4 C, W, Z 60%25 One, 2, 3 & 4 C, W, Z 60%35 One, 2, 3 & 4 C, W, Z 60%50 One, 2, 3 & 4 C, W, Z 60%70 One, 2, 3 & 4 C, W, Z 60%95 One, 2, 3 & 4 C, W, Z 60%120 One, 2, 3 & 4 C, W, Z 60%150 One, 2, 3 & 4 C, W, Z 60%185 One, 2, 3 & 4 C, W, Z 60%240 One, 2, 3 & 4 C, W, Z 60%300 One & 2 C, W, Z 60%400 One C, W, Z 60%Uo/U 600/1000VNotes:1) Stranded conductors only2) These cables also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387BERICA CAVI S.p.A.Via della Meccanica 2, 36040 Meledo di Sarego, , ItalyTel: +39 0444 820044 • Fax: +39 0444 820050E-mail: bericacavi@bericacavi.com • Website: www.bericacavi.comCertificate No: 1167a to BS 7629-1: 2008, BS 6387: 1994: BS 5839-1: 2013 Clause 26.2d, BS EN 50200: 2006 Annex E and BS EN50200: 2006 Class PH30EUROSAFE PLUSNominal csa of conductor(mm²)Coreconstruction(excluding drainwire & earth)BS 7629-1BS6387BS EN502001.0 (1) 2, 3 & 4 Complies C,W,Z ClassPH301.5 (1) 2, 3 & 4 Complies C,W,Z ClassPH302.5 (1) 2, 3 & 4 Complies C,W,Z ClassPH30BS EN50200Annex EBS 5839-1Clause26.2LPCB Ref.No.30min Standard 1167a/0130min30minStandardStandardUo/U 300/500VNotes1. Solid conductor only.2. In meeting the requirements of BS 7629-1: 2008, the EUROSAFE PLUS cables listed met the requirements of smoke density of BSEN 61034-2: 2005 and achieved less than 0.5%HCI on the insulation, binder tape and outer covering when tested in accorance withBS EN 50267-2-1: 1999.3. The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achived by 15min for the fire and impactphase and an additional 15min for the fire, impact and water phase.4. The EUROSAFE PLUS cables listed conform to BS 7629-1: 2008, met Class PH30 when tested in accordance with BS EN 50200:2006 and met the 30min duration when tested in accordance with BS EN 50200 2006 Annex E and hence met the requirements for astandard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2013.458 18 Jan 2014

PART 1: SECTION 8FIRE RESISTANT CABLESCavicel SpAVia Caduti del Lavoro, 18/A, 20096 Pioltello, Milan, ItalyTel: +39 02 9216 0521 • Fax: +39 02 9216 0753E-mail: cavicel@cavicel.com • Website: www.cavicel.comCertificate No: 217d to BS 6387:1994, BS EN 50267-2-1:1999FIRECEL SR 112Nominal csa of conductor (mm 2 ) Core ConstructionBS 6387BS EN 50267-2-1 LPCB Ref. No.(see note 1) (see notes 2, 3, 4 & 5) (outer covering)1.5 One C, W, Z

PART 1: SECTION 8FIRE RESISTANT CABLESFIRECEL SR 114E Fire Resistant CableNominal csa ofconductor (mm 2 )CoreConstruction(excluding drainwire & earth)BS 7629-1 BS 6387 BS EN 50200 BS 8434-2 BS 5839-1Clause 26.2LPCB Ref. No.1.0 (1) 2, 3 & 4 Complies (4) C, W ,Z Class PH120 120min (5) Enhanced (6) 217g/011.5 (2) 2, 3 & 4 Complies (4) C, W, Z Class PH120 120min (5) Enhanced (6)2.5 (2) 2, 3 & 4 Complies (4) C, W, Z Class PH120 120min (5) Enhanced (6)4.0 (3) 2, 3 & 4 Complies (4) C, W, Z Class PH120 120min (5) Enhanced (6)Uo/U 300/500VNotes:1) Solid conductor only.2) Solid & Stranded conductors.3) Stranded conductor only.4) In meeting the requirements of BS 7629-1: 2008, the FIRECEL SR 114E cables listed met the requirements of smoke density of BSEN 61034-2: 2005 and achieved less than 0.5%HCI on the insulation, binder tape and outer covering when tested in accordance withBS EN 50267-2-1: 1999.5) The duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impact phaseand an additional 60min for the fire, impact and water phase.6) The FIRECEL SR 114E cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200:2006 and met the 120min duration when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met the requirements for anenhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.Certificate No: 217h to BS 6387: 1994 and BS EN 60702-1: 2002FIRECEL MI 900 LNominal csa ofCore Construction BS 6387 BS EN 60702-1 LPCB Ref. No.conductor (mm 2 )(see note 1)1.0 2, 3, 4 & 7 C,W,Z Complies 217h/011.5 2, 3, 4 & 7 C,W,Z Complies2.5 2, 3, 4 & 7 C,W,Z Complies4.0 2 C,W,Z CompliesUo/U 300/500 VNotes:1) The above range is certified in both Bare and Served constructions.Certificate No: 217h to BS 6387: 1994 and BS EN 60702-1: 2002FIRECEL MI 901 HNominal csa ofCore constructionBS 6387BS EN 60702-1 LPCB Ref. No.conductor (mm 2 )(see note 1)(see note 2)1.5 One C,W,Z Complies 217h/022.5 One C,W,Z Complies4.0 One C,W,Z Complies6.0 One C,W,Z Complies10 One C,W,Z Complies16 One C,W,Z Complies25 One C,W,Z Complies35 One C,W,Z Complies50 One C,W,Z Complies70 One C,W,Z Complies95 One C,W,Z Complies120 One C,W,Z Complies150 One C,W,Z Complies185 One C,W,Z Complies240 One C,W,Z Complies300 One C,W,Z Complies400 One C,W,Z CompliesUo 750VNotes:1) The above range is certified in both Bare and Served constructions.460 18 Jan 2014

PART 1: SECTION 8FIRE RESISTANT CABLES2) For cable with an outside diameter in excess of 20mm, the category Z tests were conducted in accordance with guidance from themanufacturer.Certificate No: 217h to BS 6387: 1994 and BS EN 60702-1: 2002FIRECEL MI 900 HNominal csa ofCore ConstructionBS 6387BS EN 60702-1 LPCB Ref. No.conductor (mm 2 )(see note 1)(see note 2)1.5 2, 3, 4, 7, 12 & 19 C,W,Z Complies 217h/032.5 2, 3, 4, 7 &12 C,W,Z Complies4.0 2, 3 & 4 C,W,Z Complies6.0 2, 3 & 4 C,W,Z Complies10 2, 3 & 4 C,W,Z Complies16 2, 3 & 4 C,W,Z Complies25 2, 3 & 4 C,W,Z CompliesUo/U 450/750VNotes:1) The above range is certified in both Bare and Served constructions.2) For cable with an outside diameter in excess of 20mm, the category Z tests were conducted in accordance with guidance from themanufacturer.Context Plus Ltd175 Mauldeth Road, Fallowfield, Manchester M14 6SG, United KingdomTel: +44 (0)161 257 2541 • Fax: +44 (0)161 225 8817E-mail: xportsales@xportsales.com • Website: www.xportsales.comCertificate No: 682a-(cl-3) to BS 7629-1: 2008, BS EN 50200: 2006 Class PH120, BS EN 50200: 2006 Annex E and BS 5839-1: 2013Clause 26.2dContext PlusNominal csaof conductor (mm 2 )CoreConstruction(excluding drainwire & earth)BS 7629-1 BS EN 50200 BS EN 50200Annex EBS 5839-1Clause 26.2LPCB Ref. No.1.0 (1) 2, 3 & 4 Complies (3) Class PH120 30min (4) Standard (5) 682a/011.5 (1) 2, 3 & 4 Complies (3) Class PH120 30min (4) Standard (5)2.5 (1) 2, 3 & 4 Complies (3) Class PH120 30min (4) Standard (5)4.0 (2) 2, 3 & 4 Complies (3) Class PH120 30min (4) Standard (5)Uo/U 300/500VNotes:1) Solid conductor only.2) Stranded conductor only.3) In meeting the requirements of BS 7629-1: 2008, the Context Plus cables listed met the requirements of smoke density of BS EN61034-2: 2005 fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the insulation,binder tape and outer covering when tested in accordance with BS EN 50267-2-1: 1999.4) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impactphase and an additional 15min for the fire, impact and water phase.5) The Context Plus cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006and met the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for astandard fire resistant cable as described in Clause 26.2 of BS 5839-1 :2013.Certificate No: 682c-(cl-1) to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005, BS EN 50200: 2006 Annex E and BSEN 50200: 2006 Class PH12018 Jan 2014 461

PART 1: SECTION 8FIRE RESISTANT CABLESContext Plus XPNominal csa ofconductor (mm²)Core construction(excluding drainwire)BS63870.5 (1) 2, 3 & 4 C, W,Z0.75 (1) 2, 3 & 4 C, W,Z1.0 (1) 2, 3 & 4 C, W,Z1.5 (1) 2, 3 & 4 C, W,Z2.5 (1) 2, 3 & 4 C, W,Z4.0 (2) 2, 3 & 4 C, W,ZBS EN50267-2-1BS EN61034-2BS EN50200Annex EBS EN5020060% 30min (3) ClassPH12060% 30min (3) ClassPH12060% 30min (3) ClassPH12060% 30min (3) ClassPH12060% 30min (3) ClassPH12060% 30min (3) ClassPH120LPCB Ref.No.682c/01Uo/U 300/500VNotes:1) Solid conductor only.2) Stranded conductor only.3) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achived by 15min for the fire and impactphase and an additional 15min for the fire, impact and water phase.Dätwyler Cabling Solutions AGGotthardstrasse 31, CH-6460 Altdorf, SwitzerlandTel: +41 41 875 1122 • Fax: +41 41 875 1860E-mail: info-cabling.ch@daetwyler.com • Website: www.cabling-daetwyler.comCertificate No: 172b to BS 7629-1:2008, EN 50200:2006 Class PH30, EN 50200:2006 Annex E 30min and BS 5839-1:2013 Clause26.2dDatwyler Standard Fire Safety CableNominal csa ofconductor (mm 2 )Core Construction(excludingdrain wire & earth)BS 7629-1 BS 6387 EN 50200 EN 50200Annex EBS 5839-1Clause26.2LPCB Ref. No.1.0 (1) 2, 3 & 4 Complies (3) C, W, Z Class PH30 30min (4) Standard (5) 172b/011.5 (2) 2, 3 & 4 Complies (3) C, W, Z Class PH30 30min (4) Standard (5)2.5 (2) 2, 3 & 4 Complies (3) C, W, Z Class PH30 30min (4) Standard (5)Uo/U 300/500VNotes:1. Solid conductor only.2. Solid and stranded conductors.3. In meeting the requirements of BS 7629-1:2008, the Datwyler Standard Fire Safety Cables listed met the requirements of smokedensity of EN 61034-2:2005, fire resistance requirements CWZ in Clause 11 of BS 6387:1994 and achieved less than 0.5%HCI (outercovering, binder tape and insulation) when tested in accordance with EN 50267-2-1:1999.4. The duration of 30min when tested in accordance with EN 50200:2006 Annex E is achieved by 15min for the fire and impact phaseand an additional 15min for the fire, impact and water phase.5. The Datwyler Standard Fire Safety Cables listed conform to BS 7629-1:2008, met Class PH30 when tested in accordance with EN50200:2006 and met the 30min duration when tested in accordance with EN 50200:2006 Annex E and hence met the requirementsfor a standard fire resistant cable as described in Clause 26.2 of BS 5839-1:2013.Certificate No: 172c to BS 7629-1:2008, BS 6387:1994, EN 50200:2006 Class PH120, BS 8434-2:2003+A2:2009 120min and BS5839-1:2013 Clause 26.2eDatwyler Enhanced Fire Safety CableNominal csa ofconductor (mm²)Core construction(excluding drainwire and earth)BS 7629-1 BS 6387 EN 50200 BS 8434-2 BS 5839-1Clause 26.2LPCB Ref. No.1.5 (1) 2 Complies (2) C,W,Z Class PH120 120min (3) Enhanced (4) 172c/012.5 (1) 2 Complies (2) C,W,Z Class PH120 120min (3) Enhanced (4)462 18 Jan 2014

PART 1: SECTION 8FIRE RESISTANT CABLESUo/U 300/500VNotes:1. Solid and stranded conductors.2. In meeting the requirements of BS 7629-1:2008, the Datwyler Enhanced Fire Safety Cables listed met the requirements of smokedensity of EN 61034-2:2005, fire resistance requirements CWZ in Clause 11 of BS 6387:1994 and achieved less than 0.5%HCl onthe outer covering, binder tape & insulation when tested in accordance with EN 50267-2-1:1999.3. The duration of 120min when tested in accordance with BS 8434-2:2003+A2:2009 is achieved by 60min for the fire and impact phaseand an additional 60min for the fire, impact and water phase.4. The Datwyler Enhanced Fire Safety Cables listed conform to BS 7629-1:2008, met Class PH120 when tested in accordance with EN50200:2006 and met the 120min duration when tested in accordance with BS 8434-2:2003+A2:2009 and hence met the requirementsfor an enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1:2013.Certificate No: 172d to BS 6387:1994, EN 61034-2:2005, EN 50267-2-1:1999, IEC 60754-1:2011,BS EN 50267-2-3: 1999 and IEC 60754-2-2011Datwyler Fire Safety BS 6387 CWZNominal csa ofCoreconductor (mm²) Construction(see note 1)BS6387EN 50267-2-1 (seenote 2)EN 50267-2-3 (seenote 3)EN61034-2LPCB Ref.No.1.5 2 C, W, Z 60% 172d/012.5 2 C, W, Z 60%Uo/U 300/500VNotes:1. Solid conductors only.2. In achieving less than 0.5%HCI on the insulation, binder tape and outer covering when tested in accordance with EN 50267-2-1:1999, the Datwyler Fire Safety BS 6387 CWZ cables listed also met the requirements of IEC 60754-1: 2011.3. In achieving a weighted average of pH greater than 4.3 and a weighted average of Conductivity less than 10µS/mm on theconstituent materials when tested in accordance with EN 50267-2-3: 1999, the Datwyler Fire Safety BS 6387 CWZ cables listed alsomet the requirements of IEC 60754-2-2011.Doncaster CablesMillfields Industrial Estate, Arksey Lane, Bentley, Doncaster, South Yorkshire DN5 0SJ, United KingdomTel: +44 (0)1302 821700 • Fax: +44 (0)1302 821701E-mail: sales@doncastercables.com • Website: www.doncastercables.comCertificate No: 338a to BS 7629-1: 2008, BS 6387: 1994, EN 50200: 2006 Class PH30, EN 50200: 2006 Annex E & BS 5839-1: 2013Clause 26.2dFiresure CablesNominal csaof conductor (mmCore construction(excludingBS 7629-1 EN 50200 EN 50200 AnnexEBS 5839-1ClauseLPCB Ref.No.2 )drain wire & earth)26.21.0 (1) 2, 3 & 4 Complies (3) Class 30min (4) Standard (5) 338a/01PH301.5 (1) 2, 3 & 4 Complies (3) Class 30min (4) Standard (5)PH302.5 (2) 2, 3 & 4 Complies (3) Class 30min (4) Standard (5)PH304.0 (2) 2, 3 & 4 Complies (3) ClassPH3030min (4) Standard (5)Uo/U 300/500VNotes:1. Solid conductor only.2. Stranded conductor only.3. In meeting the requirements of BS 7629-1: 2008, the Firesure Cables listed met the requirements of smoke density of EN 61034-2:2005, fire resistance requirements of CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the (outer covering,binding tape & insulation) when tested in accordance with EN 50267-2-1: 1999.18 Jan 2014 463

PART 1: SECTION 8FIRE RESISTANT CABLES4. The duration of 30min when tested in accordance with EN 50200: 2006 Annex E is achieved by 15min for the fire and impact phaseand an additional 15min for the fire, impact and water phase.5. The Firesure Cables listed conform to BS 7629-1: 2008, met Class PH30 when tested in accordance with EN 50200: 2006 and metthe 30min duration when tested in accordance with EN 50200: 2006 Annex E and hence met the requirements for a standard fireresistant cable as described in Clause 26.2 of BS 5839-1: 2013.Certificate No: 338b to BS 7629-1: 2008, BS 6387: 1994, IEC 60331-21: 1999, IEC 60332-3-24: 2000+A1:2008, EN 50200: 2006Class PH120, BS 8434-2: 2003+A2:2009 120min and BS 5839-1: 2013 Clause 26.2eFIRESURE PLUSNominal Corecsa of constructionconductor (excluding(mm 2 ) drain wire &earth)BS 7629-1BS6387IEC60331-21IEC60332-3-24EN502001.0 (1) 2, 3 & 4 Complies (3) C,W,Z Complies (4) Complies ClassPH1201.5 (1) 2, 3 & 4 Complies (3) C,W,Z Complies (4) Complies ClassPH1202.5 (2) 2, 3 & 4 Complies (3) C,W,Z Complies (4) Complies ClassPH1204.0 (2) 2, 3 & 4 Complies (3) C,W,Z Complies (4) Complies ClassPH120BS8434-2BS 5839-1Clause26.2LPCBRef. No.120min (5) Enhanced (6) 338b/01120min (5) Enhanced (6)120min (5) Enhanced (6)120min (5) Enhanced (6)Uo/U 300/500VNotes:1. Solid conductor only2. Stranded conductor only3. In meeting the requirements of BS 7629-1: 2008, the FIRESURE PLUS listed met the requirements of smoke density of EN 61034-2:2005, fire resistance requirements of CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl (outer covering, bindingtape & insulation) when tested in accordance with EN 50267-2-1: 1999.4. These cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 950ºC.5. The duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impactphase and an additional 60min for the fire, impact and water phase.6. The FIRESURE PLUS cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with EN 50200: 2006and met a duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met the requirements for anenhanced fire resistant cable as described in Clause 26.2e of BS 5839-1: 2013.Certificate No: 338c to BS 7629-1: 2008, BS 6387: 1994, 50200: 2006 Class PH120, EN 50200: 2006 Annex E, BS 5839-1: 2013Clause 26.2dFIRESURE 500Nominal csa ofconductor (mm²)Core construction(excluding drainwire & earth)BS 7629-1 BS 6387 EN 50200 EN 50200Annex EBS 5839-1Clause 26.2LPCB Ref. No.1.0 (1) 2, 3 & 4 Complies (2) C,W,Z Class PH120 30min (3) Standard (4) 338c/011.5 (1) 2, 3 & 4 Complies (2) C,W,Z Class PH120 30min (3) Standard (4)2.5 (1) 2, 3 & 4 Complies (2) C,W,Z Class PH120 30min (3) Standard (4)Uo/U 300/500VNotes:1. Solid conductor only.2. In meeting the requirements of BS 7629-1: 2008, the FIRESURE 500 cables listed met the requirements of smoke density of EN61034-2: 2005 and achieved less than 0.5%HCI (insulation, binder tape and outer covering) when tested in accordance with EN50267-2-1: 1999.3. The duration of 30min when tested in accordance with EN 50200: 2006 Annex E is achieved by 15min for the fire and impact phaseand an additional 15min for the fire, impact and water phase.4. The FIRESURE 500 cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with EN 50200: 2006and met the 30min duration when tested in accordance with EN 50200: 2006 Annex E and hence met the requirements for a standardfire resistant cable as described in Clause 26.2 of BS 5839-1: 2013.Certificate No: 338d to BS EN 60702-1: 2002464 18 Jan 2014

PART 1: SECTION 8FIRE RESISTANT CABLES(DONCASTER CABLES ENGLAND) MINERAL INSULATED CABLENominal csa of conductor (mm 2 ) Core Construction BS EN 60702-1 LPCB Ref. No.1.0 (1,2) 2, 3 & 4 Complies 338d/012.5 (1,2) 2, 3 & 4 Complies4.0 (1,2) 2 CompliesUo/U 300/500VNotes:1. Solid conductor only.2. The above range is certified in Served construction only.Draka (Malaysia) Sdn. Bhd.Lot 48, Jalan Industri 13, Alor Gajah Industrial Estate, 78000 Alor Gajah, Malacca, MalaysiaTel: +606 556 3833 • Fax: +606 556 3282E-mail: scmm@draka.com • Website: www.draka.com.myCertificate No: 994a to BS 6387: 1994, IEC 60331-21: 1999, BS EN 50267-2-1: 1999 and BS EN 61034-2: 2005FIRETUF Classic MI SIFER (s)Nominal csa of conductor Core(mm 2 )construction(See note 1)BS 6387(See notes 2 -4)BS EN 50267-2-1BS EN61034-2IEC 60331-21(See note9)LPCB Ref.No.1.5 One C, W, Z (5) 60% Complies 994a/012.5 One C, W, Z (5) 60% Complies4.0 One C, W, Z (6, 7) 60% Complies6.0 One C, W, Z (6, 7) 60% Complies10 One C, W, Z (6, 7) 60% Complies16 One C, W, Z (6, 7) 60% Complies25 One C, W, Z (6, 7) 60% Complies35 One C, W, Z (6, 7) 60% Complies50 One C, W, Z (6, 7) 60% Complies70 One C ( 7) 60% Complies95 One C ( 7) 60% Complies120 One C ( 7) 60% Complies150 One C ( 7) 60% Complies185 One C ( 7) 60% Complies240 One C ( 7) 60% Complies300 One C ( 7) 60% Complies400 One Complies (8) 60% Complies500 One Complies (8) 60% Complies630 One Complies (8) 60% CompliesUo/U 600/1000VNotes:1) Stranded conductor only.2) Clauses 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the calbe having only one core.3) These cables also met category C, W, Z when tested for voltage rating 600/1000V which is not recognised by BS 6387.4) Where a single cable is fitted in a conduit, only phase to earth voltage was applied.5) To satisfy the requirement of BS 6387, testing for C, W & Z.categories were conducted using a 20mm stainless steel conduit as theother metallic element.6) To satisfy the requirement of BS 6387, testing for W & Z categories were conducted using a 20mm stainless steel conduit as theother metallic element.7) To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the othermetallic element.8) Only Clause 10 of BS 6387 was conducted.9) These cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 750 o C and at a voltage rating of 600V.18 Jan 2014 465

PART 1: SECTION 8FIRE RESISTANT CABLESDraka UK LimitedAlfreton Road, Derby DE21 4AE, United KingdomTel: +44 (0)1332 345431 • Fax: +44 (0)1332 331237E-mail: firetuf@drakauk.com • Website: www.drakauk.comCertificate No: 361b to BS 6387: 1994 and BS EN 50267-2-1: 1999FTPNominal csa ofconductor (mm 2 )CoreConstruction(excluding drainwire & earth)BS 6387(see notes 2 & 3)BS EN 50267-2-1(outer covering)LPCB Ref. No.1.5 (1) 2, 3 & 4 C,W,Z

PART 1: SECTION 8FIRE RESISTANT CABLESNominal csa ofconductor (mm 2 )CoreConstruction(excluding drainwire & earth)BS 6387(see notes 1 & 2)BS EN 50267-2-1(outer covering)185/95 4+ Concentric Earth C, W, Z

PART 1: SECTION 8FIRE RESISTANT CABLESFT120Nominal csa ofconductor(mm 2 )Core Construction(excluding drainwireand earth)BS 7629-11.5 2, 3 & 4 Complies(1)2.5 2, 3 & 4 Complies(1)4.0 2, 3 & 4 Complies(1)BS6387BS EN50200BS 8434-2BS 5839-1Clause 26.2LPCB Ref.No.C,W,Z Class PH120 120min (2) Enhanced (3) 361f/01C,W,Z Class PH120 120min (2) Enhanced (3)C,W,Z Class PH120 120min (2) Enhanced (3)Uo/U 300/500VNotes:1) In meeting the requirements of BS 7629-1: 2008, the FT120 cables listed met the requirements of smoke density of BS EN 61034-2:2005 and achieved less than 0.5%HCl on the insulation, binder tape and outer covering when tested in accordance with BS EN50267-2-1: 1999.2) The duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impactphase and an additional 60min for the fire, impact and water phase.3) The FT120 cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006 and metthe 120min duration when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met the requirements for an enhancedfire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.Certificate No: 361g to BS 8491: 2008, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005 and BS EN 60332-3-24: 2009FTP120Nominal csaofconductor(mm 2 )Core Construction(excluding earthwire)BS 8491(fire survivaltime)BS EN 50267-2-1BS EN61034-2BS EN 60332-3-24LPCB Ref.No.2.5 (1,2) 7 120min 60% Complies 361g/014.0 (1,2) 2, 3, 4 & 7 120min 60% Complies6.0 (1,2) 2, 3 & 4 120min 60% Complies10 (1,2) 2, 3 & 4 120min 60% Complies16 (1,2) 2, 3 & 4 120min 60% Complies25 (1,2) 2, 3 & 4 120min 60% Complies35 (1,2) 2, 3 & 4 120min 60% Complies50 (1,2) 2, 3 & 4 120min 60% Complies70 (1,2) 2, 3 & 4 120min 60% Complies95 (1,2) 2, 3 & 4 120min 60% Complies120 (1,2) 2, 3 & 4 120min 60% Complies150 (1,2) 2, 3 & 4 120min 60% Complies185 (1,2) 2, 3 & 4 120min 60% Complies240 (1,2) 2, 3 & 4 120min 60% Complies300 (1,2) 2, 3 & 4 120min 60% Complies400 (1,2) 2, 3 & 4 120min 60% CompliesUo/U 600/1000VNotes:1) Stranded conductor only.2) All cables have the blue core designated as a Neutral conductor; only phase to earth voltage was applied to the 2 core cables.Certificate No: 361h to BS6387: 1994, BS EN 50267-2-1: 1999 and IEC 60331-21: 1999FT SIFER 950iNominal csa of Core Construction BS 6387 IEC 60331-21 BS EN 50267-2-1 LPCB Ref. No.conductor (mm 2 ) (see note 1) (see notes 2-4) (see note 8) (outer covering)1.5 One C,W,Z (5) Complies

PART 1: SECTION 8FIRE RESISTANT CABLESNominal csa ofconductor (mm 2 )Core Construction(see note 1)BS 6387(see notes 2-4)IEC 60331-21(see note 8)BS EN 50267-2-1(outer covering)70 One C,W,Z (6,7) Complies

PART 1: SECTION 8FIRE RESISTANT CABLESDraka UK LimitedChickenhall Lane, Eastleigh, Hants SO50 6YU, United KingdomTel: 01332 345431 • Fax: 01332 331237E-mail: cableuk@draka.com • Website: www.drakauk.comCertificate No: 1134a to BS 7629-1: 2008, BS 6387: 1994, BS EN 50200: 2006 Class PH120, BS EN 50200: 2006 Annex E and BS5839-1: 2002+A2: 2008.2dFT30Nominal csaof conductor (mm2 )CoreConstruction(excluding drainwire & earth)BS 7629-1BS6387BS EN50200BS EN50200Annex EBS 5839-1Clause26.2LPCB Ref.No.1.5 (1, 3) 2, 3 & 4 Complies (4) C,W,Z Class PH120 30min Standard 1134a/012.5 (1, 3) 2, 3 & 4 Complies (4) C,W,Z Class PH120 30min Standard4.0 (2, 3) 2, 3 & 4 Complies (4) C,W,Z Class PH120 30min StandardUo/U 300/500VNotes:1) Solid conductors only.2) Stranded conductors only.3) All cables have the blue core designated as a Neutral conductor, only phase to earth voltage was applied to the 2 core cables.4) In meeting the requirements of BS 7629-1: 2008, the FT30 cables listed met the requirements of smoke density of BS EN 61034-2:2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCI on the insulation, tapes andouter covering when tested in accordance with BS EN 50267-2-1: 1999.5) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impactphae and an additional 15min for the fire, impact and water phase.6) The FT30 cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006 and metthe 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for a standard fireresistant cable as described in clause 26.2 of BS 5839-1: 2002+A2: 2008.Certificate No: 1134b to BS 7629-1: 2008, BS 6387: 1994, BS EN 50200: 2006 Class PH120, BS 8434-2: 2003+A2: 2009 and BS5839-1: 2002+A2: 2008 Clause 26.2eFT120Nominal csaof conductor (mm 2Core Construction(excluding drainwire & earth)BS 7629-1 BS 6387 BS EN 50200 BS 8434-2 BS 5839-1Clause 26.2LPCB Ref. No.1.5 (1, 3) 2, 3 & 4 Complies C,W,Z Class PH120 120min Enhanced 1134b/012.5 (1, 3) 2, 3 & 4 Complies C,W,Z Class PH120 120min Enhanced4.0 (2, 3) 2, 3 & 4 Complies C,W,Z Class PH120 120min EnhancedUo/U 300/500VNotes:1) Solid conductors only.2) Stranded conductors only.3) All cables have the blue core designated as a Neutral conductor, only phase to earth voltage was applied to the 2 core cables.4) In meeting the requirements of BS 7629-1: 2008, the FT120 cables listed met the requirements of smoke density of BS EN 61034-2:2005, fire resistance rrequirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCI on the insulation, tapesand outer covering when tested in accordance with BS EN 50267-2-1: 1999.5) The duration of 120min when teted in accordance wtih BS 8434-2: 2003+A2: 2009 is achieved by 60min for the fire and impact phaseand an additional 60min for the fire, impact and water phase.6) The FT120 cables listed confirm to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006 and metthe 120min duration when tested in accordance with BS 8434-2: 2003+A2: 2009 and hence met the requirements for an enhancedfire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2: 2008.Certificate No: 1134c to BS 6387: 1994 and IEC 60331-21: 1999470 18 Jan 2014

PART 1: SECTION 8FIRE RESISTANT CABLESFT SIFER 950iNominal csaCore constructionBS 6387IEC 60331-21 LPCB Ref. No.of conductor (mm 2(see note 1)(See notes 2 to 4) (see note 8)16 One C, W, Z 6) Complies 1134c/0125 One C, W, Z 6) Complies35 One C, W, Z 6) Complies50 One C, W, Z 6) Complies70 One C, W, Z 6) Complies95 One C, W, Z 6) Complies120 One C Complies150 One C Complies185 One - Complies240 One - Complies300 One - Complies400 One - Complies500 One - Complies630 One - CompliesUo/U 600/1000VNotes:1) Stranded conductor only.2) Clauses 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core.3) There cables also met category c, W, Z when tested for voltage rating 600/1000V which is not recognised by BS 6387.4) Where a single cable is fitted in a conduit, only phase to earth voltage was applied.5) To satisfy the requirement of BS 6387, testing for C, W & Z categories was conducted using a 20mm stainless steel conduit as theother metallic element.6) To satisfy the requirement of BS 6387, testing for W & Z categories was conducted using a 20mm stainless steel conduit as the othermetallic element.7) To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the othermetallic element.8) The FT SIFER 950i cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 950 o C for a duration of90mins + 15mins cool down, at a voltage rating of 600V.Certificate No: 1134d to BS 8491: 2008, BS EN 50267-2-1: 1999 and BS EN 61034-2: 2005FTP120Nominal csa Core construction BS 8491 BS EN 50267-2-1 BS EN 61034-2 LPCB Ref. No.of conductor (mm 2 (see notes 1 & 2)10 2, 3 & 4 120min 60% 1134d/0116 2, 3 & 4 120min 60%2.5 7 120min 60%25 2, 3 & 4 120min 60%35 2, 3 & 4 120min 60%4.0 2, 3 & 4 120min 60%50 2, 3 & 4 120min 60%6.0 2, 3 & 4 120min 60%70 2 & 3 120min 60%120 2, 3 & 4 120min 60% 1134d/02150 2, 3 & 4 120min 60%185 2, 3 & 4 120min 60%240 2, 3 & 4 120min 60%300 2, 3 & 4 120min 60%400 2, 3 & 4 120min 60%70 4 120min 60%95 2, 3 & 4 120min 60%Uo/U 600/1000VNotes:1. Stranded conductor only.2. All 2 core cables have the blue core designated as a Neutral conductor, only phase to earth voltage was applied.Certificate No: 1134e to BS 6387: 1994 and BS EN 50267-2-1: 199918 Jan 2014 471

PART 1: SECTION 8FIRE RESISTANT CABLESFTPNominal csaCore ConstructionBS 6387 BS EN 50267-2-1 LPCB Ref. No.of conductor (mm 2(see note 1)(see note 2) (outer covering)1.0 2, 3 & 4 C.W.Z

PART 1: SECTION 8FIRE RESISTANT CABLESCertificate No: 1134h to BS 6387: 1984, BS EN 50267-2-1: 1999 and IEC 60331-21: 1999FT SIFER 950sNominal csa Core construction BS 6387 BS EN 50267-2-1 IEC 60331-21 LPCB Ref. No.of conductor (mm 2 (see note1) (see notes 2 to 4) (outer covering) (see note 7)1.5 one C, W, Z (5)

PART 1: SECTION 8FIRE RESISTANT CABLESCertificate No: 1134k to BS 7629-1:1997. This certificate is to a withdrawn version of the BS 7629-1:1997. Cables conforming tothis version of the standard may not be suitable for use within the juristiction of the European Union (EU), BS EN 50200:2006,BS EN 50200:2006 Annex E, BS 5839-1:2013FT30 SAFFIRENominal csaof conductor (mm 2Core construction(excluding drainwire & earth)BS 7629-1 BS EN 50200 BS EN 50200Annex EBS 5839-1Clause 26.2LPCB Ref. No.1.5 (1) 2, 3 & 4 Complies (4) Class PH30 & PH60 30min (5) Standard (6) 1134k/012.5 (2) 2, 3 & 4 Complies (4) Class PH30 & PH60 30min (5) Standard (6)4.0 (2) 2, 3 & 4 Complies (4) Class PH30 & PH60 30min (5) Standard (6)Uo/U 300/500VNotes:1) Solid conductor only.2) Stranded conductor only.3) In meeting the requirements of BS 7629-1:1997, the FT30 SAFFIRE cables listed met the requirements of smoke density of BS EN61034-2:2005, fire resistance requirements CWZ in Clause 11 of BS 6387:1994 and achieved less than 0.5% HCl on the insulation,binder tape & outer covering when tested in accordance with BS EN 50267-2-1:1999.4) BS 7629-1:1997 was amended in 2004 to implement the changes to the identification of cores by colours, in accordance with theCENELEC Harmonisation Document HD 308 S2. The un-amended version of the standard was withdrawn on 31 st March 2006.However, cables with the old identification colours, meeting the withdrawn version of the standard, are still requested by someregulators outside of the EU. Certification to the un-amended version of the standard has therefore been maintained, for the timebeing, to satisfy the requirements of these regulators.5) The duration of 30 min when tested in accordance with BS EN 50200:2006 Annex E is achieved by 15 min for the fire and impactphase and a further 15 min for the fire, impact and water phase.6) The FT30 SAFFIRE cables listed conform to BS 7629-1:1997, met Class PH30 when tested in accordance with BS EN 50200:2006and met the 30min duration when tested in accordance with BS EN 50200:2006 Annex E and hence met the requirements for astandard fire resistant cable as described in Clause 26.2 of BS 5839-1:2013.Certificate 1134j covers cables certified in accordance with BS 7629-1:2008Dubai Cable Company (Private) Limited, Trading as DucabOld Abu Dhabi Road, Jebel Ali, Dubai, United Arab EmiratesTel: +9714 815 8888 • Fax: +9714 815 8433E-mail: ducab@ducab.com • Website: www.ducab.com, Sales office: PO Box 11529, Dubai, UAECertificate No: 781a to BS 7846: 2009 Category F2Ducab Flam BICC 4Nominal csa ofCore ConstructionBS 7846LPCB Ref. No.conductor (mm 2 )(see note 1)1.5 2, 3 & 4 F2 (2) 781a/012.5 2, 3 & 4 F2 (2)4.0 2, 3 & 4 F2 (2)6.0 2, 3 & 4 F2 (2)10 2, 3 & 4 F2 (2)16 2, 3 & 4 F2 (2)25 2, 3 & 4 F2 (2)35 2, 3 & 4 F2 (2)Uo/U 600/1000VNotes1) Stranded conductor only.2) In meeting the requirements of BS 7846: 2009 Category F2, the Ducab Flam BICC 4 cables met the requirements of smoke density ofBS EN 61034-2: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCI on theinsulation, tapes, filler, bedding and outer covering when tested in accordance with BS EN 50267-2-1: 1999.474 18 Jan 2014

PART 1: SECTION 8FIRE RESISTANT CABLESCertificate No: 781c to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005 and IEC 60331-21: 1999Ducab Flam BICC 1Nominal csa ofCoreconductor (mm 2 Construction)(see note 1)BS 6387(see notes 2 -5)BS EN 50267-2-1BS EN 61034-2IEC 60331-21(see note 6)LPCB Ref.No.1.5 One C, W, Z 60% Complies 781c/012.5 One C, W, Z 60% Complies4.0 One C, W, Z 60% Complies6.0 One C, W, Z 60% Complies10 One C, W, Z 60% CompliesUo/U 600/1000VNotes:1) Stranded conductor only.2) Clause 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core.3) To satisfy the requirement of BS 6387, testing for C, W & Z categories was conducted using a 20mm stainless steel conduit as theother metallic element.4) These cables also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387.5) Where a single cable is fitted in a conduit, only phase to earth voltage was applied.6) These cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 950 o C for a duration of 90mins + 15minscool down, at a voltage rating of 600V.Dubai Cable Company (Private) Limited, Trading as DucabDucab-M1, Plot No. - 2D12,3D2,4D2,5D2, Sector - M41, Industrial City of Abu Dhabi-1, Mussafah, Abu Dhabi,United Arab EmiratesTel: +9714 815 8888 • Fax: +9714 815 8433E-mail: ducab@ducab.com • Website: www.ducab.comSales office:PO Box 11529, Dubai, United Arab EmiratesCertificate No: 782a to BS 7846: 2009 Category F2Ducab Flam BICC 4Nominal csaof conductor (mm 2CoreConstruction(see note 1)BS 7846LPCB Ref. No.16 2, 3 & 4 F2 (2) 782a/0125 2, 3 & 4 F2 (2)35 2, 3 & 4 F2 (2)50 2, 3 & 4 F2 (2)70 2, 3 & 4 F2 (2)95 2, 3 & 4 F2 (2)120 2, 3 & 4 F2 (2)150 2, 3 & 4 F2 (2)185 2, 3 & 4 F2 (2)240 2, 3 & 4 F2 (2)300 2, 3 & 4 F2 (2)400 2, 3 & 4 F2 (2)Uo/U 600/1000VNotes:1) Stranded conductors only.2) In meeting the requirements of BS 7846: 2009 Category F2, the Ducab Flam BICC 4 cables listed met the requirements of smokedensity of BS EN 61034-2: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCIon the insulation, tapes, filler, bedding and outer covering when tested in accordance with BS EN 50267-2-1: 1999.18 Jan 2014 475

PART 1: SECTION 8FIRE RESISTANT CABLESCertificate No: 782c to BS 6387: 1994, IEC 60331-21: 1999, BS EN 50267-2-1: 1999 and BS EN 61034-2: 2005Ducab Flam BICC 1Nominal csa Core constructionof(See note 1)conductormm 2BS 6387(See notes 2 - 4)BS EN 50267-2-1BS EN 61034-2 IEC 60331-21(See note 8)LPCB Ref. No.1.5 One C,W,Z (5) 60% Complies 782c/012.5 One C,W,Z (5) 60% Complies4.0 One C,W,Z (5) 60% Complies6.0 One C,W,Z (5) 60% Complies10 One C,W,Z (5) 60% Complies16 One C,W,Z (6,7) 60% Complies25 One C,W,Z (6,7) 60% Complies35 One C,W,Z (6,7) 60% Complies50 One C,W,Z (6,7) 60% Complies70 One C,W,Z (6,7) 60% Complies95 One C,W,Z (6,7) 60% Complies120 One - 60% Complies150 One - 60% Complies185 One - 60% Complies240 One - 60% Complies300 One - 60% Complies400 One - 60% Complies500 One - 60% Complies630 One - 60% CompliesUo/U 600/1000VNotes:1) Stranded conductor only.2) Clauses 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core.3) These cables also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387.4) Where a single cable is fitted in a conduit, only phase to earth voltage was applied.5) To satisfy the requirement of BS 6387, testing for C, W & Z categories was conducted using a 20mm stainless steel conduit as theother metallic element.6) To satisfy the requirement of BS 6387, testing for W & Z categories was conducted using a 20mm stainless steel conduit as the othermetallic element.7) To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the othermetallic element.8) These cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 950 o C for a duration of 90mins + 15minscool down, at a voltage rating of 600V.Certificate No: 782f to BS 6387: 1994, IEC 60331-21: 1999, BS EN 50267-2-1: 1999 and BS EN 61034-2: 2005Ducab Flam BICC 3Nominal csa of Core construction BS 6387 BS EN 50267-2-1 BS EN 61034-2 IEC 60331-21 LPCB Ref. No.conductor (mm²) (See note 1) notes 2 - 4)(See note 8)1.5 One C, W, Z (5) 60% Complies 782f/012.5 One C, W, Z (5) 60% Complies4.0 One C, W, Z (6,7) 60% Complies6.0 One C, W, Z (6,7) 60% Complies10 One C, W, Z (6,7) 60% Complies16 One C, W, Z (6,7) 60% Complies25 One C, W, Z (6,7) 60% Complies35 One C, W, Z (6,7) 60% Complies50 One C, W, Z (6,7) 60% Complies70 One C, W, Z (6,7) 60% Complies95 One C (7) 60% Complies120 One C (7) 60% Complies150 One C (7) 60% Complies185 One C (7) 60% Complies240 One C (7) 60% Complies300 One C (7) 60% Complies400 One C (7) 60% Complies500 One - 60% Complies630 One - 60% Complies476 18 Jan 2014

PART 1: SECTION 8FIRE RESISTANT CABLESUo/U 600/1000VNotes:!) Stranded conductor only.2) Clauses 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core.3) These cables also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387.4) Where a single cable is fitted in a conduit, only phase to earth voltage was applied.5) To satisfy the requirement of BS 6387, testing for C, W & Z categories were conducted using a 20mm stainless steel conduit as theother metallic element.6) To satisfy the requirement of BS 6387, testing for W & Z categories were conducted using a 20mm stainless steel conduit as theother metallic element.7) To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the othermetallic element.8) These cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 950 o C and at a voltage rating of 600V.Certificate No: 408f-(cl-1) to BS 7629-1: 2008, BS EN 50200: 2006 Class PH30, BS EN 50200: 2006 Annex E and BS 5839-1:2002+A2:2008 Clause 26.2dDucab Flam BICC 2Nominal csa of Core construction BS 7629-1 BS EN 50200 BS EN 50200 BS 5839-1 LPCB Ref. No.conductor (mm²) (excluding earth wire)Annex E Clause 26.21.0 (1) 2, 3 & 4 Complies (4) Class PH30 30min (5) Standard (6) 408f/011.5 (1) 2, 3 & 4 Complies (4) Class PH30 30min (5) Standard (6)2.5 (2, 3) 2, 3 & 4 Complies (4) Class PH30 30min (5) Standard (6)4.0 (3) 2 Complies (4) Class PH30 30min (5) Standard (6)Uo/U 300/500VNotes:1) Solid conductor only.2) Solid and stranded conductors.3) Stranded conductor only.4) In meeting the requirements of BS 7629-1: 2008, the Ducab Flam BICC 2 cables listed met the requirements of smoke density of BSEN 61034-2: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on theinsulation, binder tape & outer covering when tested in accordance with BS EN 50267-2-1: 1999.5) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impactphase and an additional 15min for the fire, impact and water phase as described in Clause 26.2d) of BS 5839-1: 2002+A2:2008.6) The Ducab Flam BICC 2 cables listed conform to BS 7629-1: 2008, met Class PH30 when tested in accordance with BS EN 50200:2006 and met the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for astandard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.Certificate No: 408g-(cl-1) to BS 7629-1: 1997. This certificate is to a withdrawn version of the BS 7629-1: 1997. Cablesconforming to this version of the standard may not be suitable for use within the jurisdiction of the European Union (EU). BS EN50200: 2006 Class PH30, BS EN 50200: 2006 Annex E and BS 5839-1: 2002+A2:2008 Clause 26.2dDucab Flam BICC 2Nominal csa of Core construction BS 7629-1 BS EN 50200 BS EN 50200 BS 5839-1 LPCB Ref. No.conductor (mm²) (excluding earth wire) (see note 7)Annex E Clause 26.21.0 (1) 2, 3 & 4 Complies (4) Class PH30 30min (5) Standard (6) 408g/011.5 (1) 2, 3 & 4 Complies (4) Class PH30 30min (5) Standard (6)2.5 (2, 3) 2, 3 & 4 Complies (4) Class PH30 30min (5) Standard (6)4.0 (3) 2 Complies (4) Class PH30 30min (5) Standard (6)Uo/U 300/500VNotes:1) Solid conductor only.2) Solid and Stranded conductors.3) Stranded conductor only.4) In meeting the requirements of BS 7629-1: 1997, the Ducab Flam BICC 2 cables listed met the requirements of smoke density of BSEN 50268-2: 2000, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on theinsulation, binder tape & outer covering when tested in accordance with BS EN 50267-2-1: 1999.5) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impactphase and an additional 15min for the fire, impact and water phase as described in Clause 26.2d) of BS 5839-1: 2002+A2:2008.18 Jan 2014 477

PART 1: SECTION 8FIRE RESISTANT CABLES6) The Ducab Flam BICC 2 cables listed conform to BS 7629-1: 1997, met Class PH30 when tested in accordance with BS EN 50200:2006 and met the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for astandard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.7) BS 7629-1: 1997 was amended in 2004 to implement the changes to the identification of cores by colours, in accordance with theCENELEC Harmonisation Document HD 308 S2. The un-amended version of the standard was withdrawn on 31st March 2006.However, cables with the old identification colours, meeting the withdrawn version of the standard, are still requested by someregulators outside of the EU. Certification to the un-amended version of the standard has therefore been maintained, for the timebeing, to satisfy the requirements of these regulators.Certificate 408f covers cables certified in accordance with BS 7629-1: 2008Certificate No: 782g to BS 8491: 2008, BS EN 50267-2-1: 1999 and BS EN 61034-2: 2005Ducab Flam BICC 6Nominal csa of Core construction BS 8491 BS EN 50267-2-1 BS EN 61034-2 LPCB Ref. No.conductor (mm²) (see note 2)120 3 & 4 120min 60% 782g/01150 3 & 4 120min 60%16 (1) 3 & 4 120min 60%185 (1) 3 & 4 120min 60%240 (1) 3 & 4 120min 60%25 (1) 3 & 4 120min 60%300 3 & 4 120min 60%35 (1) 3 & 4 120min 60%400 3 & 4 120min 60%50 3 & 4 120min 60%70 3 & 4 120min 60%95 3 & 4 120min 60%Uo/U 600/1000VNote:1) Stranded conductor only.Certificate No: 782h to BS 7629-1: 2008, BS 5839-1: 2013 Clause 26.2d, EN 50200: 2006 Class PH120 and EN 50200: 2006 AnnexEDucab Flam BICC 2aNominal csa ofCore Construction BS 7629-1 EN 50200 EN 50200 BS 5839-1 LPCB Ref. No.conductor (mm²) (excluding drain wire and earth)Annex E Clause 26.21.5 (1) 2, 3 & 4 Complies Class PH120 30min Standard 782h/012.5 (1) 2, 3 & 4 Complies Class PH120 30min Standard4.0 (2) 2, 3 & 4 Complies Class PH120 30min StandardUo/U 300/500VNotes:1. Solid conductor only.2. Stranded conductor only.3. In meeting the requirements of BS 7629-1: 2008, the Ducab Flam BICC 2a cables listed met the requirements of smoke density of EN61034-2: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCI on the insulation,binder tape and outer covering when tested in accordance with EN 50267-2-1: 1999.4. The duration of 30min when tested in accordance with EN 50200: 2006 Annex E is achieved by 15min for the fire and impact phaseand an additional 15min for the fire, impact and water phase.5. The Ducab Flam BICC 2a cables listed conform to BS 7629-1: 2008 met Class PH120 when tested in accordance with EN 50200:2006 and met the 30min duration when tested in accordance with EN 50200: 2006 Annex E and hence met the requirements for astandard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2013.478 18 Jan 2014

PART 1: SECTION 8FIRE RESISTANT CABLESDubai Cable Company (Private) Limited, Trading as DucabDucab-M2, Plot No. - J6 14-15-16, Sector - M41, Industrial City of Abu Dhabi-1, Mussafah, Abu Dhabi, UnitedArab EmiratesTel: +9714 815 8888 • Fax: +9714 815 8433E-mail: ducab@ducab.com • Website: www.ducab.com, Sales office: PO Box 11529, Dubai, UAECertificate No: 949a to BS 7846: 2009 Category F2Ducab Flam BICC 4Nominal csa ofCore constructionBS 7846LPCB Ref. No.conductor (mm 2 )(see note 1)1.5 2, 3 & 4 F2 (2) 949a/012.5 2, 3 & 4 F2 (2)4.0 2, 3 & 4 F2 (2)6.0 2, 3 & 4 F2 (2)10 2, 3 & 4 F2 (2)Uo/U 600/1000VNotes:1. Stranded conductors only.2. In meeting the requirements of BS 7846: 2009 Category F2, the Ducab Flam BICC 4 cables listed met the requirements of smokedensity of BS EN 61034-2: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HClon the insulation, tapes, filler, bedding and outer covering when tested in accordance with BS EN 50267-2-1: 1999.Eland Cables120 Highgate Studios, 53-79 Highgate Road, London NW5 1TL, United KingdomTel: +44 (0)20 7241 8787 • Fax: +44 (0)20 7241 8700E-mail: sales@eland.co.uk • Website: www.eland.co.ukCertificate No: 568c-(cl-1) to BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), BS EN 50200: 2000, BS 8434-1: 200330min and BS 5839-1: 2002 Clause 26.2dFireForceNominal csa ofconductor(mm²)CoreConstruction(excluding drainwire & earth)BS 7629-1(IncorporatingAmendmentsNos. 1 & 2)BS EN50200BS 8434-1BS 5839-1Clause26.2LPCB Ref.No.1.0 (1) 2, 3 & 4 Complies (3) Class PH30 30min (4) Standard (5) 568c/011.5 (1) 2, 3 & 4 Complies (3) Class PH30 30min (4) Standard (5)2.5 (1) 2, 3 & 4 Complies (3) Class PH30 30min (4) Standard (5)4.0 (2) 2, 3 & 4 Complies (3) Class PH30 30min (4) Standard (5)Notes:1) Solid and Stranded conductors.2) Stranded conductor only.3) In meeting the requirements of BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), the FireForce cables listed met therequirements of smoke density of BS EN 50268-2: 2000 and achieved less than 0.5%HCl on the (insulation, binder tape & outercovering) when tested in accordance with BS EN 50267-2-1: 1999.4) The duration of 30min when tested in accordance with BS 8434-1: 2003 is achieved by 15min for the fire and impact phase and anadditional 15min for the fire, impact and water phase as described in Clause 26.2 d) of BS 5839-1: 2002.5) The FireForce cables listed conform to BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), met Class PH30 when tested inaccordance with EN 50200: 2000 and met a duration of 30min when tested in accordance with BS 8434-1: 2003 and hence met therequirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002.18 Jan 2014 479

PART 1: SECTION 8FIRE RESISTANT CABLESEmirates Fire Fighting Equipment Factory L.L.C. (FIREX)P.O.Box 22436, Industrial Area 13, Sharjah, United Arab EmiratesTel: +971 6 5340300 • Fax: +971 6 5340090E-mail: firex@emirates.net.ae • Website: www.firexuae.comCertificate No: 568a-(cl-3) to BS 6387: 1994 and BS EN 50267-2-1: 1999FIREXNominal csa ofCore Construction BS 6387 BS EN 50267-2-1LPCB Ref. No.conductors (mm²)(outer covering)1.0 (1) 2, 3 & 4 C, W, Z

PART 1: SECTION 8FIRE RESISTANT CABLESNote:1) Solid conductor only.Fireguard Safety Equipment Co Ltd2nd Floor, 145-147 St John Street, London EC1V 4PY, United KingdomTel: +44 (0)8450 751042 • Fax: +44 (0)845 2991039E-mail: info@fireguard-uk.com • Website: www.fireguard-uk.comCertificate No: 711c-(cl-2) to BS 6387: 1994 and BS EN 50200: 2006 Class PH30Fireguard-UK FG FRC 180 PH30Nominal csa ofCore constructionBS 6387 BS EN 50200 LPCB Ref. No.conductors (mm²)(excluding drain wire & earth)1.0 (1) 2, 3 & 4 C, W, Z Class PH30 711c/011.5 (1) 2, 3 & 4 C, W, Z Class PH302.5 (1) 2, 3 & 4 C, W, Z Class PH30Uo/U 300/500VNote:1) Solid conductor only.Firesafe10 Sanderson Way, Marton, Blackpool FY4 4NB, United KingdomTel: 01253 699500 • Fax: 01253 699550E-mail: info@firesafe.co.uk • Website: www.firesafe.co.ukCertificate No: 682a-(cl-6) to BS 7629-1: 2008, BS 5839-1: 2013 Clause 26.2d, BS EN 50200: 2006 Annex E and BS EN 50200: 2006Class PH120zeroburnNominal csaof conductor(mm 2 )Core construction(excluding drain wire and earth)BS 7629-1 BS EN 50200 BS EN 50200Annex EBS 5839-1Clause 26.2LPCB Ref. No.1.0 (1) 2, 3 & 4 Complies Class PH120 30min (4) Standard (5) 682a/011.5 (1) 2, 3 & 4 Complies Class PH120 30min (4) Standard (5)2.5 (1) 2, 3 & 4 Complies Class PH120 30min (4) Standard (5)4.0 (2) 2, 3 & 4 Complies Class PH120 30min (4) Standard (5)Uo/U 300/500VNotes:1) Solid conductor only.2) Stranded conductor only.3) In meeting the requirements of BS 7629-1: 2008, the zeroburn cables listed met the requirements of smoke density of BS EN 61034-2: 2005, fire resistance requirements CWZ in clause 11 of BS 6387: 1994 and achieved less than 0.5%HCI on the insulation, bindertape and outer covering when tested in accordance with BS EN 50267-2-1: 1999.4) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impactphase and an additional 15min for the fire, impact and water phase.5) The zeroburn cables listed conform to BS 7629-1:2008, met Class PH120 when tested in accordance with BS EN 50200: 2006 andmet the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for a standardfire resistant cable as described in Clause 26.2 of BS 5839-1: 2013.Certificate No: 682d-(cl-1) to BS 7629-1: 2008, BS EN 50200: 2006 Class PH120, BS 8434-2: 2003+A2:2009 120min and BS 5839-1:2013 Clause 26.2e18 Jan 2014 481

PART 1: SECTION 8FIRE RESISTANT CABLESzeroburn PlusNominal csaCore constrution BS 7629-1 BS EN 50200 BS 8434-2 BS 5839-1 LPCB Ref. No.of conductor (mm 2 ) (ecluding drain wire & earth)Clause 26.21.0 (1) 2, 3 & 4 Complies (3) Class PH120 120min (4) Enhanced (5) 682d/011.5 (1) 2, 3 & 4 Complies (3) Class PH120 120min (4) Enhanced (5)2.5 (1) 2, 3 & 4 Complies (3) Ckass PH120 120min (4) Enhanced (5)4.0 (2) 2, 3 & 4 Complies (3) Class PH120 120min (4) Enhanced (5)Uo/U 300/500VNotes:1. Solid conductor only.2. Stranded conductor only.3. In meeting the requirements of BS 7629-1: 2008, the zeroburn Plus cables listed met the requirements of smoke density of BS EN61034-2: 2005, fire resistance requirements CWZ in clause 11 of BS 6387: 1994 and achieved less than 0.5%HCI on the insulation,binder tape and outer covering when tested in accordance with BS EN 50267-2-1: 1999.4. The duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impactphase and an additional 60min for the fire, impact and water phase.5. The zeroburn Plus cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006and met the 120min duration when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met the requirements for anenhanced fire resistant cable as described in Clause 26.2 of BS 5829-1: 2013.Grupo General Cable Sistemas, S.A.CTRA. Rusinol, 63., 08560, Manlleu, SpainTel: +34 93 852 02 00 • Fax: +34 93 852 02 22E-mail: info@generalcable.es • Website: www.generalcable.esCertificate No: 722a to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 50268-2: 2000 and IEC 60331-21: 1999SEGURFOC FR 950 07Z-R-MNominal csa of Coreconductor (mm 2 ) Construction(see note 1)BS 6387 BS EN 50267-2-1(insulation & Binder tape)BS EN 50268-2 IEC 60331-21(see note 7)LPCB Ref. No.1.5 one (3,4) C, W, Z 60% Complies 722a/012.5 one (4,5,6) C, W, Z 60% Complies4.0 one (4,5,6) C, W, Z 60% Complies6.0 one (4,5,6) C, W, Z 60% Complies10 one (4,5,6) C, W, Z 60% Complies16 one (4,5,6) C, W, Z 60% Complies25 one (2,5,6) C, W 60% Complies35 one (2,5,6) C, W 60% Complies50 one (2,5,6) C, W 60% Complies70 one (2,5,6) C, W 60% Complies95 one (2,5,6) C, W 60% Complies120 one (2,5,6) C, W 60% Complies150 one (2,5,6) C, W 60% Complies185 one (2,6) C 60% Complies240 one (2,6) C 60% Complies300 one (2,6) C 60% Complies400 one (2,6) C 60% Complies500 one (2,6) C 60% CompliesUo/U 450/750VNotes:1) Clause 8 (Bending) and 9.1 & 9.2 (Impact) can not be conducted due to the cable having only one core.2) Where a single cable is fitted in a conduit, only phase to earth voltage was applied.3) To satisfy the requirement of BS 6387, testing for C & W categories was conducted using a 20mm stainless steel conduit as the othermetallic element.4) To satisfy the requirement of BS 6387, testing for Z category was conducted using a 20mm stainless steel conduit as the othermetallic element.5) To satisfy the requirement of BS 6387, testing for W category was conducted using a 38mm stainless steel conduit as the othermetallic element.6) To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the othermetallic element.7) Testing to IEC 60331-21: 1999 was conducted at 450V.482 18 Jan 2014

PART 1: SECTION 8FIRE RESISTANT CABLESCertificate No: 722b to BS 7629-1: 2008, BS 6387: 1994, BS EN 50200: 2006 Class PH30, BS EN 50200: 2006 Annex E and BS5839-1: 2002+A2:2008 Clause 26.2dGENFIRE ALARMNominal csa of Core constructionconductor (excluding drain wire &(mm²)earth)BS 7629-1BS6387BS EN50200BS EN50200Annex EBS 5839-1Clause26.2LPCB Ref.No.1.0 (1) 2, 3 & 4 Complies (3) C,W,Z Class PH30 30min (4) Standard (5) 722b/011.5 (1) 2, 3 & 4 Complies (3) C,W,Z Class PH30 30min (4) Standard (5)2.5 (1) 2, 3 & 4 Complies (3) C,W,Z Class PH30 30min (4) Standard (5)4.0 (2) 2, 3 & 4 Complies (3) C,W,Z Class PH30 30min (4) Standard (5)Uo/U 300/500VNotes:1) Solid conductor only.2) Stranded conductor only.3) In meeting the requirements of BS 7629-1: 2008, the GENFIRE ALARM cables listed met the requirements of smoke density of BSEN 61034-2: 2005 and achieved less than 0.5%HCI on the insulation, binder tape and outer covering when tested in accordance withBS EN 50267-2-1: 1999.4) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impactphase and an additional 15min for the fire, impact and water phase.5) The GENFIRE ALARM cables listed conform to BS 7629-1: 2008, met Class PH30 when tested in accordance with BS EN 50200:2006 and met the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for astandard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.Grupo General Cable Sistemas, S.L.CTRA. DE RIBAS KM 13.250, Montcada I Reixac, 08110, Barcelona, SpainTel: +34 93 227 95 00 • Fax: +34 93 227 95 22E-mail: info@generalcable.es • Website: www.generalcable.esCertificate No: 730a to BS 7846: 2000 (Incorporating Amendment Nos 1 and 2)SEGURFOC FRA 950Nominal csa ofCoreBS 7846LPCB Ref. No.conductor (mm 2 )Construction(see note 2)1.5 (1) 2, 3 & 4 F2 730a/012.5 (1) 2, 3 & 4 F24.0 (1) 2, 3 & 4 F26.0 (1) 2, 3 & 4 F210 (1) 2, 3 & 4 F216 (1) 2, 3 & 4 F225 (1) 2, 3 & 4 F235 (1) 2, 3 & 4 F250 (1) 2, 3 & 4 F270 (1) 2, 3 & 4 F295 (1) 2, 3 & 4 F2120 (1) 2, 3 & 4 F2150 (1) 2, 3 & 4 F2185 (1) 2, 3 & 4 F2Uo/U 600/1000VNotes:1) Stranded conductor only.2) In meeting the requirements of BS 7846 Category F2, the SEGURFOC FRA 950 cable met the requirements for fireresistance characteristics category CWZ specified in Clause 11 of BS 6387.Certificate No: 730a to BS 7846: 2000 (Incorporating Amendment Nos 1 and 2)18 Jan 2014 483

PART 1: SECTION 8FIRE RESISTANT CABLESSEGURFOC FRA-1 950Nominal csa ofCoreBS 7846LPCB Ref. No.conductor (mm 2 )Construction(see note 2)240 (1) 2, 3 & 4 F2 730a/02300 (1) 2, 3 & 4 F2400 (1) 2, 3 & 4 F2Uo/U 600/1000VNotes:1) Stranded conductor only.2) In meeting the requirements of BS 7846 Category F2, the SEGURFOC FRA-1 950 cable met the requirements for fire resistancecharacteristics category CWZ specified in Clause 11 of BS 6387.Huzhou Jiusheng Electric Co Ltd1000 Xifeng Road, Huzhou Economy & Technology Area, Huzhou, Zhejiang, ChinaTel: +86 572 222 8188 • Fax: +86 572 222 8177E-mail: zjh@hz-tec • Website: www.teccable.comCertificate No: 948a to BS EN 60702-1: 2002 and BS 6387: 1994TEC MI BARE CABLE (LIGHT DUTY)Nominal csa of conductor (mm²) Core Construction BS EN 60702-1 BS 6387 LPCB Ref. No.1.0 (1,2) 2, 3, 4 & 7 Complies C,W,Z 948a/011.5 (1,2) 2, 3, 4 & 7 Complies C,W,Z2.5 (1,2) 2, 3, 4 & 7 Complies C,W,Z4.0 (1,2) 2 Complies C,W,ZUo/U 300/500VNotes:1) Solid conductor only.2) The above cables are certified in Bare construction only.Certificate No: 948b to BS 60702-1: 2002, BS 6387: 1994, BS 5839-1: 2002+A2:2008 Clause 26.2e, BS EN 50200: 2006 ClassPH120, BS 8343-2: 2003+A2:2009 120min and BS EN 50267-2-1: 1999TEC MI SERVED CABLE (LIGHT DUTY)Nominal csa ofconductor(mm²)CoreConstructionBS EN60702-1 (seenote 3)BS6387BS EN502001.0 (1,2) 2, 3, 4 & 7 Complies C,W,Z ClassPH1201.5 (1,2) 2, 3, 4 & 7 Complies C,W,Z ClassPH1202.5 (1,2) 2, 3, 4 & 7 Complies C,W,Z ClassPH1204.0 (1,2) 2 Complies C,W,Z ClassPH120BS8434-2BS 5839-1Clause 26.2BS EN 50267-2-1 (outercovering)LPCBRef. No.120min Enhanced (4)

PART 1: SECTION 8FIRE RESISTANT CABLESIrish Driver-Harris Company LimitedMillbanks, New Ross, Co. Wexford, IrelandTel: +353 51 421 405 • Fax: +353 51 422 983E-mail: sales@idh.ie • Website: www.idh.ieCertificate No: 408a to BS 7629-1:1997 (Incorporating Amendments Nos. 1 & 2), BS EN 50200: 2000 Class PH30, BS8434-1: 200330min and BS 5839-1: 2002 Clause 26.2dKilflam 2000Nominal csa ofconductor (mm 2 )CoreConstruction(excluding drainwire & earth)BS 7629-1(IncorporatingAmendmentsNos.1 & 2)BS EN 50200 BS 8434-1 BS 5839-1Clause 26.2LPCB Ref. No.1.0 (1) 2, 3 & 4 Complies (5) Class PH30 30min (6) Standard (7) 408a/011.5 (2,3) 2, 3 & 4 Complies (5) Class PH30 30min (6) Standard (7)2.5 (4) 2, 3 & 4 Complies (5) Class PH30 30min (6) Standard (7)4.0 (4) 2, 3 & 4 Complies (5) Class PH30 30min (6) Standard (7)Uo/U 300/500VNotes:1) Solid conductor only.2) Solid conductor at 3 & 4 cores only.3) Stranded conductor at 2 core only.4) Stranded conductor only.5) In meeting the requirements of BS 7629-1:1997 (Incorporating Amendments Nos. 1 and 2), the Kilflam 2000 cables met therequirements of smoke density of BS EN 50268-2: 2000, fire resistance requirements CWZ in Clause 11 of BS 6387:1994 andachieved less than 0.5%HCI on the (outer covering, insulation and binder tape) when tested in accordance with BS EN 50267-2-1:1999.6) The duration of 30min when tested in accordance with BS 8434-1: 2003 is achieved by 15min for the fire and impact phase and anadditional 15min for the fire, impact and water phase as described in Clause 26.2d) of BS 5839-1:2002.7) The Kilflam 2000 cables listed conform to BS 7629-1:1997 (Incorporating Amendments Nos. 1 and 2), met Class PH30 when testedin accordance with BS EN 50200:2000 and met the 30min duration when tested in accordance with BS 8434-1: 2003 and hence metthe requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1:2002.Certificate No: 408b to BS 6387: 1994Kilflam 1000Nominal csa ofCoreBS 6387LPCB Ref. No.conductor (mm 2 )Construction1.5 One C, W, Z 408b/012.5 One C, W, Z4.0 One C, W, Z6.0 One C, W, Z10.0 One C, W, Z16.0 One C, W, ZUo/U 450/750VNotes:1) Clauses 8 (Bending) and 9.1 & 9.2 (Impact) can not be conducted due to the cable only having one core.2) To satisfy the requirements of BS 6387, testing for C, W and Z categories was conducted using 20mm steel conduit as the othermetallic element.Certificate No: 408d to BS 6387: 1994 and BS EN 50267-2-1: 1999Kilflam 1200Nominal csa ofconductor (mm 2 )CoreConstruction(see note 1)BS 6387(see notes 2, 3 & 7)BS EN 50267-2-1(outer covering)LPCB Ref. No.1.5 One (4,6) C, W, Z

PART 1: SECTION 8FIRE RESISTANT CABLESNominal csa ofconductor (mm 2 )CoreConstruction(see note 1)BS 6387(see notes 2, 3 & 7)BS EN 50267-2-1(outer covering)10.0 One (5,6) C, W, Z

PART 1: SECTION 8FIRE RESISTANT CABLESUo/U 450/750VNotes:1) Clauses 8 (Bending) and 9.1 & 9.2 (Impact) can not be conducted due to the cable having only one core.2) To satisfy the requirement of BS 6387, testing for C, W, and Z categories was conducted using 20mm steel conduit as the othermetallic element.Certificate No: 408f to BS 7629-1: 2008, BS EN 50200: 2006 Class PH30, BS EN 50200: 2006 Annex E 30min and BS 5839-1:2002+A2:2008 Clause 26.2dKilflam Standard 2000Nominal csa of Core construction BS 7629-1 BS EN 50200 BS EN 50200 BS 5839-1 LPCB Ref. No.conductor (mm²) (excluding earth wire)Annex E Clause 26.21.0 (1) 2, 3 & 4 Complies (4) Class PH30 30min (5) Standard (6) 408f/011.5 (1) 2, 3 & 4 Complies (4) Class PH30 30min (5) Standard (6)2.5 (2, 3) 2, 3 & 4 Complies (4) Class PH30 30min (5) Standard (6)4.0 (3) 2 Complies (4) Class PH30 30min (5) Standard (6)Uo/U 300/500VNotes:1) Solid conductor only.2) Solid and stranded conductors.3) Stranded conductor only.4) In meeting the requirements of BS 7629-1: 2008, the Kilflam Standard 2000 cables listed met the requirements of smoke density ofBS EN 61034-2: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the(outer covering, binder tape & insulation) when tested in accordance with BS EN 50267-2-1: 1999.5) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impactphase and an additional 15min for the fire, impact and water phase as described in Clause 26.2d) of BS 5839-1: 2002+A2:2008.6) The Kilflam Standard 2000 cables listed conform to BS 7629-1: 2008, met Class PH30 when tested in accordance with BS EN50200: 2006 and met the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met therequirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.Certificate No: 408g to BS 7629-1: 1997 This certificate is to a withdrawn version of the BS 7629-1: 1997. Cables conforming tothis version of the standard may not be suitable for use within the jurisdiction of the European Union (EU), BS EN 50200: 2006Class PH30, BS EN 50200: 2006 Annex E and BS 5839-1: 2002+A2:2008 Clause 26.2dKilflam Standard 2000Nominal csa of Core construction BS 7629-1 BS EN 50200 BS EN 50200 BS 5839-1 LPCB Ref. No.conductor (mm²) (excluding earth wire) (see note 7)Annex E Clause 26.21.0 (1) 2, 3 & 4 Complies (4) Class PH30 30min (5) Standard (6) 408g/011.5 (1) 2, 3 & 4 Complies (4) Class PH30 30min (5) Standard (6)2.5 (2, 3) 2, 3 & 4 Complies (4) Class PH30 30min (5) Standard (6)4.0 (3) 2 Complies (4) Class PH30 30min (5) Standard (6)Uo/U 300/500VNotes:1) Solid conductor only.2) Solid and Standard conductors.3) Stranded conductor only.4) In meeting the requirements of BS 7629-1: 1997, the Kilflam Standard 2000 cables listed met the requirements of smoke density ofBS EN 50268-2: 2000, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the(outer covering, binder tape & insulation) when tested in accordance with BS EN 50267-2-1: 1999.5) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impactphase and an additional 15min for the fire, impact and water phase as described in Clause 26.2d) of BS 5839-1: 2002+A2:2008.6) The Kilflam Standard 2000 cables listed conform to BS 7629-1: 1997, met Class PH30 when tested in accordance with BS EN50200: 2006 and met the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met therequirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.7) BS 7629-1: 1997 was amended in 2004 to implement the changes to the identification of cores by colours, in accordance with theCENELEC Harmonisation Document HD 308 S2. The un-amended version of the standard was withdrawn on 31st March 2006.However, cables with the old identification colours, meeting the withdrawn version of the standard, are still requested by someregulators outside the EU. Certification to the un-amended version of the standard has therefore been maintained, for the timebeing, to satisfy the requirements of these regulators.Certificate 480f covers cables certified in accordance with BS 7629-1: 2008Certificate No: 408h to BS 7846: 2009 Category F218 Jan 2014 487

PART 1: SECTION 8FIRE RESISTANT CABLESKilflam 4000 SWANominal csa ofCore constructionBS 7846LPCB Ref. No.conductor (mm²)(see note 1)1.5 2, 3, 4, 5, 7, 12, 19, 27, 37 & 48 F2 (2) 408h/012.5 2, 3, 4, 5, 7, 12, 19, 27, 37 & 48 F2 (2)4.0 2, 3, 4, 5, 7, 12, 19, 27, 37 & 48 F2 (2)6.0 2, 3, 4 & 5 F2 (2)10 2, 3, 4 & 5 F2 (2)16 2, 3, 4 & 5 F2 (2)Uo/U 600/1000VNotes:1) Stranded conductors only.2) In meeting the requirements of BS 7846: 2009 Category F2, the Kilflam 4000 SWA cables listed met the requirements for fireresistance characteristics Category CWZ specified in Clause 11 of BS 6387: 1994.Certificate No: 408j to BS 7629-1: 2008, BS 5839-1:2013 Clause 26.2e, EN 50200: 2006 Class PH120 and BS 8434-2: 2003+A2:2009Kilflam 3000Nominal csa ofconductor (mm²)Core construction(excluding drainwire & earth)BS 7629-1 EN 50200 BS 8434-2 BS 5839-1 Clause 26.2 LPCB Ref. No.1.0 (1) 2, 3 & 4 Complies (4) Class PH120 120min (5) Enhanced (6) 408j/011.5 (1) 2, 3 & 4 Complies (4) Class PH120 120min (5) Enhanced (6)2.5 (2) 2, 3 & 4 Complies (4) Class PH120 120min (5) Enhanced (6)4.0 (3) 2, 3 & 4 Complies (4) Class PH120 120min (5) Enhanced (6)Uo/U 300/500VNotes:1. Solid conductor only.2. Solid & Stranded conductors.3. Stranded conductor only.4. In meeting the requirements of BS 7629-1: 2008, the Kilflam 3000 cables listed met the requirements of smoke density of EN 61034-2: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCI on the insulation, bindertape and outer covering when tested in accordance with EN 50267-2-1: 1999.5. The duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impactphase and an additional 60min for the fire, impact and water phase.6. The Kilflam 3000 cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with EN 50200: 2006 andmet the 120min duration when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met the requirements for anenhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2013.Certificate No: 408k to BS 6387: 1994, BS EN 50267-2-1: 1999 and IEC 60331-21: 1999Kilflam 1000 aNominal csa of Core construction BS 6387 BS EN 50267-2-1 IEC 60331-21 LPCB Ref. No.conductor (mm²) (See note 1) (See notes 2-4) (Outer covering) (See notes 8 & 9)1.0 One C,W,Z (5)

PART 1: SECTION 8FIRE RESISTANT CABLES5) To satisfy the requirement of BS 6387, testing for C, W & Z categories was conducted using a 20mm stainless steel conduit as theother metallic element.6) To satisfy the requirement of BS 6387, testing for W & Z categories was conducted using a 20mm stainless steel conduit as theother metallic element.7) To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the othermetallic element.8) These cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 950ºC and at a voltage rating of 600V.9) The Kilflam 1000 a cable also met IEC 60331-21: 1999 when installed in steel conduit.Certificate No: 408m to BS 6387: 1994, BS EN 50267-2-1: 1999 and IEC 60331-21: 1999Fumeguard FR aNominal csa of Core construction BS 6387 BS EN 50267-2-1 IEC 60331-21 LPCB Ref. No.conductor (mm²) (See note 1) (See notes 2-4) (Outer covering) (See notes 8 & 9)1.0 One C,W,Z (5)

PART 1: SECTION 8FIRE RESISTANT CABLESJaylow Supplies LtdJaylow House, Leyton Link Estate, Argall Avenue, Leyton, London E10 7FD, United KingdomTel: +44 (0)870 444 6890 • Fax: +44 (0)870 444 6891Website: www.jaylowcables.comCertificate No: 682a-(cl-1) to BS 7629-1: 2008, BS EN 50200: 2006 Class PH120, BS EN50200: 2006 Annex E and BS 5839-1: 2013Clause 26.2dJayflameNominal csa ofconductor (mm 2 )CoreConstruction(excluding drainwire & earth)BS 7629-1 BS EN 50200 BS EN 50200Annex EBS 5839-1Clause 26.2LPCB Ref. No.1.0 (1) 2, 3 & 4 Complies (3) Class PH120 30min (4) Standard (5) 682a/011.5 (1) 2, 3 & 4 Complies (3) Class PH120 30min (4) Standard (5)2.5 (1) 2, 3 & 4 Complies (3) Class PH120 30min (4) Standard (5)4.0 (2) 2, 3 & 4 Complies (3) Class PH120 30min (4) Standard (5)Uo/U 300/500VNotes:1) Solid conductor only.2) Stranded conductor only.3) In meeting the requirements of BS 7629-1: 2008, the Jayflame cables listed met the requirements of smoke density of BS EN 61034-2: 2005 fire resistance requirements CWZ in Clause 11 of BS 6387:1994 and achieved less than 0.5%HCl on the insulation, bindertape and outer covering when tested in accordance with BS EN 50267-2-1: 1999.4) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impactphase and an additional 15min for the fire, impact and water phase.5) The Jayflame cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006 andmet the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for a standardfire resistant cable as described in Clause 26.2 of BS 5839-1: 2013..Certificate No: 682d-(cl-2) to BS 7629-1: 2008, BS EN 50200: 2006 Class PH120, BS 8434-2: 2003+A2:2009 120min and BS 5839-1:2013 Clause 26.2eJayflame EnhancedNominal csa Core constructionof conductor (mm 2 ) (excluding drain wire& earth)BS 7629-1 BS EN 50200 BS 8434-2 BS 5839-1Clause 26.2LPCB Ref. No.1.0 (1) 2, 3 & 4 Complies (3) Class PH120 120 min (4) Enhanced (5) 682d/011.5 (1) 2, 3 & 4 Complies (3) Class PH120 120 min (4) Enhanced (5)2.5 (1) 2, 3 & 4 Complies (3) Class PH120 120 min (4) Enhanced (5)4.0 (2) 2, 3 & 4 Complies (3) Class PH120 120 min (4) Enhanced (5)Uo/U 300/500VNotes:1. Solid conductor only.2. Stranded conductor only.3. In meeting the requirements of BS 7629-1: 2008, the Jayflame Enhanced cables listed met the requirements of smoke density of BSEN 61034-2: 2005, fire resistance requirements CWZ in clause 11 of BS 6387: 1994 and achieved less than 0.5%HCI on theinsulation, binder tape and outer covering when tested in accordance with BS EN 50267-2-1: 1999.4. The duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impactphase and an additional 60min for the fire, impact and water phase.5. The Jayflame Enhanced cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200:2006 and met the 120min duration when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met the requirements for anenhanced fire resistant cable as described in Clause 26.2 of BS 5829-1: 2013.490 18 Jan 2014

PART 1: SECTION 8FIRE RESISTANT CABLESKeystone Electric Wire & Cable Company Ltd#110 DD 83, Kwan Ti North Village, Fanling, New Territories, Hong KongTel: +852 2691 7183 • Fax: +852 2695 9738E-mail: sales@keystonecable.com • Website: www.keystonecable.comManufacturing at:Dongguan Keystone Electric Wire & Cable Co Ltd, Ye Sha Management District,, Shatin, Dongguan City,Guangdong, ChinaTel: +86 769 8886 1814 • Fax: +86 769 8886 1696E-mail: jessey@keystonecable.comSales Office:Tel: +852 2691 7183 • Fax: +852 2695 9738E-mail: sales@keystonecable.com • Website: www.keystonecable.comCertificate No: 663b to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005 and IEC 60331-21: 1999KEYSTONE FR 7211 CableNominal csa of Coreconductor (mm 2 ) Construction(see note 1)BS 6387(see note 2-3)BS EN 50267-2-1 BS EN 61034-2 IEC 60331-21 LPCB Ref. No.1.5 One C,W,Z (4) 60% Complies 663b/012.5 One C,W,Z (4) 60% Complies4.0 One C,W,Z (4) 60% Complies6.0 One C,W,Z (4) 60% Complies10 One C,W,Z (4) 60% Complies16 One C,W,Z (5,6) 60% Complies25 One C,W,Z (5,6) 60% Complies35 One C,W,Z (5,6) 60% Complies50 One C (7)

PART 1: SECTION 8FIRE RESISTANT CABLESManufacturing at:Dongguan Keystone Electric Wire & Cable Co Ltd, Ye Sha Management District,, Shatin, Dongguan City,Guangdong, ChinaTel: +86 769 8886 1814 • Fax: +86 769 8886 1696E-mail: jessey@keystonecable.comSales Office:Tel: +852 2691 7183 • Fax: +852 2695 9738E-mail: sales@keystonecable.com • Website: www.keystonecable.comCertificate No: 663c to BS 7846: 2009KEYSTONE Fire Resistance Armoured CableNominal csa ofCore Construction (see note 1) BS 7846 LPCB Ref. No.conductor (mm 2 )1.5 2, 3 & 4 F2 (2) 663c/012.5 2, 3 & 4 F2 (2)4.0 2, 3 & 4 F2 (2)6.0 2, 3 & 4 F2 (2)10 2, 3 & 4 F2 (2)16 2, 3 & 4 F2 (2)25 2, 3 & 4 F2 (2)35 2, 3 & 4 F2 (2)50 2, 3 & 4 F2 (2)70 2, 3 & 4 F2 (2)95 2, 3 & 4 F2 (2)120 2, 3 & 4 F2 (2)150 2, 3 & 4 F2 (2)185 2, 3 & 4 F2 (2)240 2, 3 & 4 F2 (2)300 2, 3 & 4 F2 (2)400 2, 3 & 4 F2 (2)Uo/U 600/1000VNote:1) Stranded conductors only.2) In meeting the requirements of BS 7846: 2009, the KEYSTONE Fire Resistance Armoured Cables listed met the requirements for fireresistance characteristics Category CWZ specified in Clause 11 of BS 6387: 1994.KME Italy SpAVia Della Repubblica 257, 55051 Fornaci Di Barga, Lucca, ItalyTel: +39 0583 701.1 • Fax: +39 0583 701623E-mail: massimo.banfi@kme.com • Website: www.kme-italy.comCertificate No: 427a to BS 6387: 1994 and BS EN 60702-1: 2002MICO - KME Light duty Mineral Insulated CableNominal csaCore Construction BS 6387 BS EN 60702-1 LPCB Ref. No.of conductor (mm 2 )(see note 1)1.0 2, 3, 4 & 7 C, W, Z Complies 427a/011.5 2, 3, 4 & 7 C, W, Z Complies2.5 2, 3, 4 & 7 C, W, Z Complies4.0 2 C, W, Z CompliesUo/U 300/500VNote:1) The above range is certified in both Bare and Served constructions.492 18 Jan 2014

PART 1: SECTION 8FIRE RESISTANT CABLESCertificate No: 427a to BS 6387: 1994 and BS EN 60702-1: 2002MICO - KME Single core heavy duty mineral insulated cablesNominal csaCore ConstructionBS 6387BS EN 60702-1 LPCB Ref. No.of conductor (mm 2 )(see note 1)(see note 2)1.5 One C, W, Z Complies 427a/022.5 One C, W, Z Complies4.0 One C, W, Z Complies6.0 One C, W, Z Complies10 One C, W, Z Complies16 One C, W, Z Complies25 One C, W, Z Complies35 One C, W, Z Complies50 One C, W, Z Complies70 One C, W, Z Complies95 One C, W, Z Complies120 One C, W, Z Complies150 One C, W, Z Complies185 One C, W, Z Complies240 One C, W, Z Complies300 One C, W, Z Complies400 One C, W, Z CompliesUo 750VNotes:1) The above range is certified in both Bare and Served constructions.2) For cable with an outside diameter in excess of 20mm, the category Z tests were conducted in accordance with guidance from themanufacturer.Certificate No: 427a to BS 6387: 1994 and BS EN 60702-1: 2002MICO - KME Multi-core heavy duty mineral insulated cablesNominal csaCore ConstructionBS 6387BS EN 60702-1 LPCB Ref. No.of conductor (mm 2 )(see note 1)(see note 2)1.5 2, 3, 4, 7, 12 & 19 C, W, Z Complies 427a/032.5 2, 3, 4, 7 & 12 C, W, Z Complies4.0 2, 3 & 4 C, W, Z Complies6.0 2, 3 & 4 C, W, Z Complies10 2, 3 & 4 C, W, Z Complies16 2, 3 & 4 C, W, Z Complies25 2, 3 & 4 C, W, Z CompliesUo/U 450/750VNotes:1) The above range is certified in both Bare and Served constructions.2) For cables with an outside diameter in excess of 20mm, the category Z tests were conducted in accordance with guidance from themanufacturer.LEONI Studer AGHerrenmattstr. 20, CH 4658 Däniken, SwitzerlandTel: +41 62 288 82 82 • Fax: +41 62 288 83 83E-mail: mailbox@leoni-studer.ch • Website: www.leoni-infrastructure.comCertificate No: 896a to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005, IEC 60331-21: 1999 and IEC 60332-3-24:2000BETAflam FR-MI 90 Cable Single Core SlNominal csaofconductor(mm 2 )Core Construction(see note 1)BS 6387 (seenotes 2-4)BS EN50267-2-1BS EN61034-2IEC 60331-21(see note 9)IEC 60332-3-24LPCBRef. No.1.5 one C,W,Z (5) 60% Complies Complies 896a/0118 Jan 2014 493

PART 1: SECTION 8FIRE RESISTANT CABLESNominal csaofconductor(mm 2 )Core Construction(see note 1)BS 6387 (seenotes 2-4)BS EN50267-2-1BS EN61034-2IEC 60331-21(see note 9)IEC 60332-3-242.5 one C,W,Z (5) 60% Complies Complies4.0 one C,W,Z (5) 60% Complies Complies6.0 one C,W,Z (5) 60% Complies Complies10 one C,W,Z (5) 60% Complies Complies16 one C,W,Z (5) 60% Complies Complies25 one C,W,Z (6,7) 60% Complies Complies35 one C,W,Z (6,7) 60% Complies Complies50 one C,W,Z (6,7) 60% Complies Complies70 one C,W,Z (6,7) 60% Complies Complies95 one C,W,Z (6,7) 60% Complies Complies120 one C (7) 60% Complies Complies150 one C (7) 60% Complies Complies185 one C (7) 60% Complies Complies240 one C (7) 60% Complies Complies300 one C (7) 60% Complies Complies400 one C (7) 60% Complies Complies500 one Complies (8) 60% Complies Complies630 one Complies (8) 60% Complies CompliesLPCBRef. No.Uo/U 600/1000VNotes:1. Stranded conductor only.2. Clauses 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core.3. These cables also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387.4. Where a single cable is fitted in a conduit, only phase to earth voltage was applied.5. To satisfy the requirement of BS 6387, testing for C, W & Z categories was conducted using a 20mm stainless steel conduit as theother metallic element.6. To satisfy the requirement of BS 6387, testing for W & Z categories was conducted using a 20mm stainless steel conduit as the othermetallic element.7. To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the othermetallic element.8. Only Clause 10 of BS 6387 was conducted.9. The BETAflam FR-MI 90 Cable Single Core SI cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of950 o C and at a voltage rating of 600V.Certificate No: 896a to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005, IEC 60331-21: 1999 and IEC 60332-3-24:2000BETAflam FR-MI 90 Cable Single Core DINominal csaofconductor(mm 2 )Core Construction(see note 1)BS 6387 (seenotes 2-4)BS EN50267-2-1BS EN61034-2IEC 60331-21(see note 9)IEC 60332-3-24LPCBRef. No.1.5 one C,W,Z (5) 60% Complies Complies 896a/022.5 one C,W,Z (5) 60% Complies Complies4.0 one C,W,Z (5) 60% Complies Complies6.0 one C,W,Z (5) 60% Complies Complies10 one C,W,Z (5) 60% Complies Complies16 one C,W,Z (5) 60% Complies Complies25 one C,W,Z (6,7) 60% Complies Complies35 one C,W,Z (6,7) 60% Complies Complies50 one C,W,Z (6,7) 60% Complies Complies70 one C (7) 60% Complies Complies95 one C (7) 60% Complies Complies120 one C (7) 60% Complies Complies150 one C (7) 60% Complies Complies185 one C (7) 60% Complies Complies240 one C (7) 60% Complies Complies300 one C (7) 60% Complies Complies400 one Complies (8) 60% Complies Complies500 one Complies (8) 60% Complies Complies630 one Complies (8) 60% Complies CompliesUo/U 600/1000V494 18 Jan 2014

PART 1: SECTION 8FIRE RESISTANT CABLESNotes:1. Stranded conductor only.2. Clauses 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core.3. These cables also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387.4. Where a single cable is fitted in a conduit, only phase to earth voltage was applied.5. To satisfy the requirement of BS 6387, testing for C, W & Z categories was conducted using a 20mm stainless steel conduit as theother metallic element.6. To satisfy the requirement of BS 6387, testing for W & Z categories was conducted using a 20mm stainless steel conduit as the othermetallic element.7. To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the othermetallic element.8. Only Clause 10 of BS 6387 was conducted.9. The BETAflam FR-MI 90 Cable Single Core DI cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of950 o C and at a voltage rating of 600V.Certificate No: 896b to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005, IEC 60331-21: 1999 and IEC 60332-3-24:2000BETAflam FR-MI 110 Cable Single Core SINominal csaofconductor(mm 2 )Core Construction(see note 1)BS 6387 (seenotes 2-4)BS EN50267-2-1BS EN61034-2IEC 60331-21(see note 9)IEC 60332-3-24LPCBRef. No.1.5 one C,W,Z (5) 60% Complies Complies 896b/012.5 one C,W,Z (5) 60% Complies Complies4.0 one C,W,Z (5) 60% Complies Complies6.0 one C,W,Z (5) 60% Complies Complies10 one C,W,Z (5) 60% Complies Complies16 one C,W,Z (5) 60% Complies Complies25 one C,W,Z (6,7) 60% Complies Complies35 one C,W,Z (6,7) 60% Complies Complies50 one C,W,Z (6,7) 60% Complies Complies70 one C,W,Z (6,7) 60% Complies Complies95 one C,W,Z (6,7) 60% Complies Complies120 one C (7) 60% Complies Complies150 one C (7) 60% Complies Complies185 one C (7) 60% Complies Complies240 one C (7) 60% Complies Complies300 one C (7) 60% Complies Complies400 one C (7) 60% Complies Complies500 one Complies (8)

PART 1: SECTION 8FIRE RESISTANT CABLESNominal csaofconductor(mm 2 )Core Construction(see note 1)BS 6387 (seenotes 2-4)BS EN50267-2-1BS EN61034-2IEC 60331-21(see note 9)IEC 60332-3-244.0 one C,W,Z (5) 60% Complies Complies6.0 one C,W,Z (5) 60% Complies Complies10 one C,W,Z (5) 60% Complies Complies16 one C,W,Z (5) 60% Complies Complies25 one C,W,Z (6,7) 60% Complies Complies35 one C,W,Z (6,7) 60% Complies Complies50 one C,W,Z (6,7) 60% Complies Complies70 one C (7) 60% Complies Complies95 one C (7) 60% Complies Complies120 one C (7) 60% Complies Complies150 one C (7) 60% Complies Complies185 one C (7) 60% Complies Complies240 one C (7) 60% Complies Complies300 one C (7) 60% Complies Complies400 one Complies (8)

PART 1: SECTION 8FIRE RESISTANT CABLES2. These cables also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387.3. The BETAflam FR-MI 110 Cable Multicore cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of950 o C and at a voltage rating of 600/1000V.Certificate No: 896c to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005, IEC 60331-21: 1999 and IEC 60332-3-24:2000BETAflam FR-MI 110 Cable Multicore STANominal csaofconductor(mm 2 )Core Construction(see note 1)BS 6387(see note 2)1.5 2, 3, 4, 5, 7, 10, 19,BS EN50267-2-1BS EN61034-2IEC 60331-21(see note 4)IEC 60332-3-24LPCB Ref.No.C,W,Z 60% Complies Complies 896c/0221 & 412.5 2, 3, 4, 5, 7, 10 & 21 C,W,Z 60% Complies Complies4.0 2, 3, 4, 5 & 7 C,W,Z 60% Complies Complies6.0 2, 3, 4 & 5 C,W,Z 60% Comlies Complies10 2, 3, 4 & 5 C,W,Z 60% Complies Complies16 3, 4 & 5 C,W,Z 60% Complies Complies25 3, 4 & 5 C,W,Z 60% Complies Complies35 (3) 3, 4 & 5 C,W,Z 60% Complies Complies50 3 & 4 C,W,Z

PART 1: SECTION 8FIRE RESISTANT CABLES3. The BETAflam FR-MI 110 Cable Multicore SWA cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of950 o C and at a voltage rating of 600/1000V.Certificate No: 896d to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005, IEC 60331-21: 1999 and IEC 60332-3-24:2009BETAflam FR-MI 110 Cable Comms S/UTPNominal csaofconductor(mm 2 )Core Construction(excluding drain wire)BS63870.75 (1) 1, 2, 3, 4, 5, 6, 7, 8, 9 & 10pairs1.0 (1) 1, 2, 3, 4, 5, 6, 7, 8, 9 & 10pairs1.5 (1, 2) 1, 2, 3, 4, 5, 6, 7, 8, 9 & 10pairs2.5 (1) 1, 2, 3, 4, 5, 6, 7, 8, 9 & 10pairsBS EN50267-2-1BS EN61034-2IEC 60331-21(see note 3)IEC 60332-3-24LPCB Ref.No.C,W,Z 60% Complies Complies 896d/01C,W,Z 60% Complies CompliesC,W,Z 60% Complies CompliesC,W,Z

PART 1: SECTION 8FIRE RESISTANT CABLESMICC (Shanghai) Electric Co Ltd801-810, NO.2 Building, Shanghai Technology Innovation Center, 100 Qinzhou Road, Shanghai 200235,ChinaTel: 0086 21 5169 1990 • Fax: 0086 21 5228 8095E-mail: sales@miccgroup.com • Website: www.miccgroup.comCertificate No: 1035a to BS EN 60702-1: 2002, BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 50200: 2006, BS 8434-2:2003+A2:2009 and BS 5839-1: 2002+A2:2008MICC Wiring CableNominal csa of Coreconductor (mm²) constructionBS EN60702-1(see note 7)BS6387BS EN50267-2-1(outercovering)MICC WiringCable (HeavyDuty)1.5 (1,3) one, 2, 3, 4 & Complies (5) C,W,Z (5)

PART 1: SECTION 8FIRE RESISTANT CABLES7) In meeting the requirements of BS EN 60702-1: 2002, the MICC Wiring Cable Served cables listed met the requirements of smokedensity of IEC 61034-2: 2005 and also met the requirements of pH & conductivity when tested in accordance with IEC 60754-2: 2011.8) The MICC Wiring Cable Served cables listed conform to BS EN 60702-1: 2002, met Class PH120 when tested in accordance with BSEN 50200: 2006 and met the 120min duration when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met therequirements for an enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2013.Mineral Insulated Cable Co LtdTemperature House, 21 Sedling Road, Wear Industrial Estate, Washington, Tyne & Wear NE38 9BZ, UnitedKingdomTel: +44 191 416 7777 • Fax: +44 191 419 2345E-mail: sales@trmltd.co.uk • Website: www.temperature-house.comCertificate No: 1039a to BS EN 60702-1: 2002, BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 50200: 2006, BS 8434-2:2003+A2:2009 and BS 5839-1: 2002+A2:2008MICC Wiring CableNominal csa of Coreconductor (mm²) constructionBS EN60702-1(see note 7)BS6387BS EN50267-2-1(outercovering)MICC WiringCable (HeavyDuty)1.5 (1,3) one, 2, 3, 4 & Complies (5) C,W,Z (5)

PART 1: SECTION 8FIRE RESISTANT CABLESNote 3: The MICC Wiring Cable (Heavy Duty) cables were tested at a voltage rating of 450/750V.Note 4: BS EN 50200: 2006, BS 8434-2: 2003+A2:2009 and BS 5839-1: 2002+A2:2008 approval applies to the 25mm 2 cable at 1 & 2cores only.Note 5: Approval applies to the Bare and Served cables.Note 6: Approval applies to the Served cable only.Note 7: In meeting the requirements of BS EN 60702-1: 2002, the MICC Wiring Cable Served cables listed met the requirementsof smoke density of IEC 61034-2: 2005 and also met the requirements of pH & conductivity when tested in accordance withIEC 60754-2-am1: 1997.Note 8: The MICC Wiring Cable Served cables listed conform to BS EN 60702-1: 2002, met Class PH120 when tested in accordancewith BS EN 50200: 2006 and met the 120min duration when tested in accordance with BS 8434-2: 2003+A2:2009 and hencemet the requirements for an enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.NAJD ELECTRICALS & SAFETY EQUIPMENT TRADINGBaghdad Street, Al Qusais 2, PO Box 85961, Dubai, United Arab EmiratesTel: +971 4 267 5414 • Fax: +971 4 267 5443E-mail: najdelec@emirates.net.ae • Website: www.najdelec-safety.comCertificate No: 568d-(cl-1) to IEC 60331-21: 1999, BS EN 50267-2-1: 1999 and BS EN 61034-2: 2005JST Fire Cable IEC 60331Nominal csa of Core construction IEC 60331-21 BS EN 50267-2-1 BS EN 61034-2 LPCB Ref. No.conductor (mm²)drainwire & earth)1.0 (1) 2, 3 & 4 Complies 60% 568d/011.5 (1) 2, 3 & 4 Complies 60%2.5 (1) 2, 3 & 4 Complies 60%Uo/U 300/500VNote:1) Solid and Stranded conductors.Certificate No: 568a-(cl-4) to BS 6387: 1994 and BS EN 50267-2-1: 1999JST Fire CableNominal csa ofCore construction BS 6387 BS EN 50267-2-1LPCB Ref. No.conductors (mm²)(outer covering)1.0 (1) 2, 3 & 4 C, W, Z

PART 1: SECTION 8FIRE RESISTANT CABLESALSECURE NX200-BBNominal Corecsa constructionof (excluding drainconductor wire and earth)(mm²)BS 7629-1BS6387EN 60332-3-24EN 502001.0 (1) 2, 3, 4 & 7 Complies (3) C,W,Z Complies ClassPH1201.5 (1) 2, 3, 4, 7, 12 & Complies (3) C,W,Z Complies Class19PH1202.5 (1) 2, 3, 4, 7 & 12 Complies (3) C,W,Z Complies ClassPH1204.0 (2) 2, 3 & 4 Complies (3) C,W,Z Complies ClassPH120EN50200Annex EBS 5839-1Clause26.2LPCB Ref.No.30min (4) Standard (5) 1029a/0130min (4) Standard (5)30min (4) Standard (5)30min (4) Standard (5)Uo/U 300/500VNotes:1. Solid conductor only.2. Stranded conductor only.3. In meeting the requirements of BS 7629-1:2008, the ALSECURE NX200-BB cables listed met the requirements of smoke density ofEN 61034-2 2005 and achieved less than 0.5%HCI on the insulation, binder tapes and outer covering when tested in accordance withEN 50267-2-1:1999.4. The duration of 30min when tested in accordance with EN 50200:2006 Annex E is achieved by 15min for the fire and impact phaseand an additional 15min for the fire, impact and water phase.5. The ALSECURE NX200-BB cables listed conform to BS 7629-1:2008, met Class PH120 when tested in accordance with EN50200:2006 and met the 30min duration when tested in accordance with EN 50200:2006 Annex E and hence met the requirementsfor a standard fire resistant cable as described in Clause 26.2 of BS 5839-1:2013.Nexans Turkiye Endustri ve Ticaret A.S.Izmir Karayolu Uzeri 6.km, Denizli, TurkeyTel: 0090 212 266 0160 • Fax: 0090 212 266 0170E-mail: Info.turkey@nexans.com • Website: www.nexans.com.trCertificate No: 946a to BS 7846: 2009 Category F2NX400 ALSECURE PLUSNominal csa ofCore ConstructionBS 7846LPCB Ref. No.conductor (mm 2 )(see note 1)1.5 2, 3 & 4 F2 (2) 946a/012.5 2, 3 & 4 F2 (2)4.0 2, 3 & 4 F2 (2)6.0 2, 3 & 4 F2 (2)10 2, 3 & 4 F2 (2)16 2, 3 & 4 F2 (2)25 2, 3 & 4 F2 (2)35 2, 3 & 4 F2 (2)50 2, 3 & 4 F2 (2)70 2, 3 & 4 F2 (2)95 2, 3 & 4 F2 (2)120 2, 3 & 4 F2 (2)150 2, 3 & 4 F2 (2)185 2, 3 & 4 F2 (2)240 2, 3 & 4 F2 (2)300 2, 3 & 4 F2 (2)400 2, 3 & 4 F2 (2)Uo/U 600/1000VNotes:1) Stranded conductors only.2) In meeting the requirements of BS 7846: 2009 Category F2, the NX400 ALSECURE PLUS cables listed met the requirements for fireresistance characteristics category CWZ specified in Clause 11 of BS 6387: 1994.Certificate No: 946b to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005 and IEC 60331-21: 1999502 18 Jan 2014

NX100 ALSECURE PLUSNominal csa of Core constructionconductor (mm 2 ) (See note 1)BS 6387(See notes2-3)PART 1: SECTION 8FIRE RESISTANT CABLESBS EN 50267-2-1 BS EN 61034-2 IEC 60331-21 LPCB Ref. No.1.5 One C,W,Z (4) 60% Complies 946b/012.5 One C,W,Z (4) 60% Complies4.0 One C,W,Z (4) 60% Complies6.0 One C,W,Z (4) 60% Complies10 One C,W,Z (4) 60% Complies16 One C,W,Z (5,6) 60% Complies25 One C,W,Z (5,6) 60% Complies35 One C,W,Z (5,6) 60% Complies50 One C,W,Z (5,6) 60% Complies70 One C,W,Z (5,6) 60% Complies95 One C,W,Z (5,6) 60% Complies120 One C (6) 60% Complies150 One C (6) 60% Complies185 One C (6) 60% Complies240 One C (6) 60% Complies300 One C (6) 60% CompliesUo/U 450/750VNotes:1) Stranded conductor only.2) Clauses 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core.3) Where a single cable is fitted in a conduit, only phase to earth voltage was applied.4) To satisfy the requirement of BS 6387, testing for C, W & Z categories was conducted using a 20mm stainless steel conduit as theother metallic element.5) To satisfy the requirement of BS 6387, testing for W & Z categories was conducted using a 20mm stainless steel conduit as the othermetallic element.6) To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the othermetallic element.Nitin Ventures FZEP.O. Box 262294, Jebel Ali Free Zone, Dubai, United Arab EmiratesTel: +97 148865858/859 • Fax: +97 148865800E-mail: sales@nitinventures.com • Website: www.nitinfire.comCertificate No: 568a-(cl-6) to BS 6387: 1994 and EN 50267-2-1: 1999NV-FSC-950Nominal csaCore construction BS 6387 EN 50267-2-1LPCB Ref. No.of conductor (mm 2 )(outer covering)1.0 (1) 2, 3 & 4 C,W,Z

PART 1: SECTION 8FIRE RESISTANT CABLESFireNor PH30Nominal csa ofCore constructionBS 6387 BS EN 50200 LPCB Ref. No.conductors (mm²)drain wire & earth)1.0 (1) 2, 3 & 4 C, W, Z Class PH30 711c/011.5 (1) 2, 3 & 4 C, W, Z Class PH302.5 (1) 2, 3 & 4 C, W, Z Class PH30Uo/U 300/500VNote:1. Solid conductor only.OLYMPIC CABLE COMPANY SDN. BHD.Lot PT 2126-2131, Jalan PK1, Taman Perindustrian Krubong, 75250 Melaka, MalaysiaTel: +606 337 3088 • Fax: +606 335 1911E-mail: mar@olympic-cable.com.my • Website: www.olympic-cable.com.myCertificate No: 1122a to BS 6387: 1994, BS EN 61034-2: 2005, BS EN 50267-2-1: 1999, IEC 60331-21: 1999, IEC 60332-3-22: 2009and IEC 60332-3-24: 2009OCC-F6C01Nominal csaofconductor(mm 2 )CoreconstructionBS 6387(See notes2-4)BS EN50267-2-1BS EN61034-2IEC 60332-3-22IEC 60332-3-24IEC60331-21(See note9)LPCB Ref.No.1.5 (1) One C,W,Z (5) 60% Complies - Complies 1122a/012.5 (1) One C,W,Z (6,7) 60% Complies - Complies4.0 (1) One C,W,Z (6,7) 60% Complies - Complies6.0 (1) One C,W,Z (6,7) 60% Complies - Complies10 (1) One C,W,Z (6,7) 60% Complies Complies16 (1) One C,W,Z (6,7) 60% Complies - Complies25 (1) One C,W,Z (6,7) 60% Complies - Complies35 (1) One C,W,Z (6,7) 60% Complies Complies Complies50 (1) One C,W,Z (6,7) 60% - Complies Complies70 (1) One C (7) 60% - Complies Complies95 (1) One C (7) 60% - Complies Complies120 (1) One C (7) 60% - Complies Complies150 (1) One C (7) 60% - Complies Complies185 (1) One C (7) 60% - Complies Complies240 (1) One C (7) 60% - Complies Complies300 (1) One C (7) 60% - Complies Complies400 (1) One Complies (8) 60% - Complies Complies500 (1) One Complies (8) 60% - Complies Complies630 (1) One Complies (8) 60% - Complies CompliesUo/U 600/1000VNotes:1) Stranded conductor only.2) Clauses 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core.3) These cables also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387.4) Where a single cable is fitted in a conduit, only phase to earth voltage was applied.5) To satisfy the requirement of BS 6387, testing for C, W & Z categories were conducted using a 20mm stainless steel conduit as theother metallic element.6) To satisfy the requirement of BS 6387, testing for W & Z categories were conducted using a 20mm stainless steel conduit as theother metallic element.7) To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the othermetallic element.8) Only Clause 10 of BS 6387 was conducted.9) These cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 750 o C and at a voltage rating of 600V.504 18 Jan 2014

PART 1: SECTION 8FIRE RESISTANT CABLESOman Cables Industry (SAOG)Road No.2, Factory No. 206, Rusayl Industrial Estate, Rusayl, Muscat, Sultanate of OmanTel: +968 24446464 • Fax: +968 24446096E-mail: omancables@omancables.com • Website: www.omancables.comCertificate No: 995a to BS 7846: 2009 Category F2OCIFLAM-FSANominal csa of conductor (mm 2 ) Core construction (see note 1) BS 7846 LPCB Ref. No.16 2, 3 & 4 F2 (2) 995a/0125 2, 3 & 4 F2 (2)35 2, 3 & 4 F2 (2)50 2, 3 & 4 F2 (2)70 2, 3 & 4 F2 (2)95 2, 3 & 4 F2 (2)120 2, 3 & 4 F2 (2)150 2, 3 & 4 F2 (2)185 2, 3 & 4 F2 (2)240 2, 3 & 4 F2 (2)300 2, 3 & 4 F2 (2)400 2, 3 & 4 F2 (2)Uo/U 600/1000VNotes:1) Stranded conductors only.2) In meeting the requirements of BS 7846: 2009 Category F2, the OCIFLAM-FSA cables listed met the requirements of smoke densityof BS EN 61034-2: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCI on theinsulation, tapes, filler, bedding and outer covering when tested in accordance with BS EN 50267-2-1: 1999.Pentair Thermal Management Canada Limited250 West Street, Trenton, Ontario K8V 5S2, CanadaTel: +613 392 6571 • Fax: +613 394 3711Website: www.tycothermal.comCertificate No: 676a to BS EN 60702-1: 2002, BS 6387: 1994 and BS EN 50267-2-1: 1999Pyrotenax Bare Mineral Insulated Cable (light duty)Nominal csa of Core Construction BS EN 60702-1 BS 6387 BS EN 50267-2-1 LPCB Ref. No.conductor (mm 2 ) (see note 1)1.0T 2 Complies C, W, Z

PART 1: SECTION 8FIRE RESISTANT CABLESPyrotenax Bare Mineral Insulated Cable (single core heavy duty)Nominal csa of Core Construction BS EN 60702-1 BS 6387 BS EN 50267-2-1 LPCB Ref. No.conductor (mm 2 ) (see note 1)2.5 One Complies C, W, Z

PART 1: SECTION 8FIRE RESISTANT CABLESNominalcsa ofconductor(mm 2 )CoreConstructionBS EN 60702-1 (see note 6)BS6387BS EN 50267-2-1 (outercovering)BS EN50200BS8434-2BS 5839-1Clause 26.2PYRO MIHeavy Duty1.5 (1,3) one, 2, 3 & 4 Complies (4) C, W,Z (4) (5) PH120 (5) (5) (5,7)1.5 (1,3) 7, 12 & 19 Complies (4) C, W,Z (4) (5) PH120 (5) (5) (5,7)2.5 (1,3) one, 2, 3 & 4 Complies (4) C, W,Z (4) (5) PH120 (5) (5) (5,7)2.5 (1,3) 7 & 12 Complies (4) C, W,Z (4) (5) PH120 (5) (5) (5,7)4.0 (1,3) one, 2, 3 & 4 Complies (4) C, W,Z (4) (5) PH120 (5) (5) (5,7)6.0 (1,3) one, 2, 3 & 4 Complies (4) C, W,Z (4) (5) PH120 (5) (5) (5,7)10 (1,3) one, 2, 3 & 4 Complies (4) C, W,Z (4) (5) PH120 (5) (5) (5,7)16 (1,3) one, 2, 3 & 4 Complies (4) C, W,Z (4) (5) PH120 (5) (5) (5,7)25 (1,3) one, 2, 3 & 4 Complies (4) C, W,Z (4) (5) PH120 (5) (5) (5,7)35 (1,3) one Complies (4) C, W,Z (4) (5) PH120 (5) (5) (5,7)50 (1,3) one Complies (4) C, W,Z (4) (5) PH120 (5) (5) (5,7)70 (1,3) one Complies (4) C, W,Z (4) (5) PH120 (5) (5) (5,7)95 (1,3) one Complies (4) C, W,Z (4) (5) PH120 (5) (5) (5,7)120 (1,3) one Complies (4) C, W,Z (4) (5) PH120 (5) (5) (5,7)150 (1,3) one Complies (4) C, W,Z (4) (5) PH120 (5) (5) (5,7)185 (1,3) one Complies (4) C, W,Z (4) (5) PH120 (5) (5) (5,7)240 (1,3) one Complies (4) C, W,Z (4) (5) PH120 (5) (5) (5,7)300 (1,3) one Complies (4) C, W,Z (4) (5) PH120 (5) (5) (5,7)400 (1,3) one Complies (4) C, W,Z (4) PH120 (5)PYRO MITwisted LightDuty1.0T (1,2) 2 Complies (4) C, W,Z (4) (5) PH120 (5) (5) (5,7)1.5T (1,2) 2, 3 & 4 Complies (4) C, W,Z (4) (5) PH120 (5) (5) (5,7)2.5T (1,2) 2 Complies (4) C, W,Z (4) (5) PH120 (5) (5) (5,7)4.0T (1,2) 2 Complies (4) C, W,Z (4) PH120 (5)LPCBRef. No.Notes:1. Solid conductor only.2. The PYRO MI Mineral Insulated Light Duty Cables were tested at a voltage rating of 300/500V.3. The PYRO MI Mineral Insulated Heavy Duty Cables were tested at a voltage rating of 450/750V.4. Approval applies to the Bare and Served cables.5. Approval applies to the Served cable only.6. In meeting the requirements of BS EN 60702-1: 2002, the PYRO MI Mineral Insulated Served Cables listed met the requirements ofsmoke density of IEC 61034-2: 2005 and also met the requirements of pH & conductivity when tested in accordance with IEC 60754-2: 2011.7. The PYRO MI Mineral Insulated Served Cables listed conform to BS EN 60702-1: 2002, met Class PH120 when tested in accordancewith BS EN 50200: 2006 and met a duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met therequirements for an Enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2013..Certificate No: 063j to BS EN 60702-1: 2002, BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 50200: 2006 Class PH120, BS 8434-2:2003+A2:2009 120min and BS 5839-1: 2013 Clause 26.2e18 Jan 2014 507

PART 1: SECTION 8FIRE RESISTANT CABLESPyro MI Mineral Insulated CablesNominal csa ofconductor (mm²)CoreconstructionBS EN60702-1(see note5)BS6387BS EN50267-2-1(outercovering)BS EN50200BS8434-2BS 5839-1Clause26.2LPCBRef. No.PYRO MI Light Duty 063j/011.5 (1,2,4) 2 & 4 Complies C,W,Z

PART 1: SECTION 8FIRE RESISTANT CABLES1) In meeting the requirements of BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), the FP200 Flex cables listed met therequirements of smoke density of BS EN 50268-2: 2000, fire resistance requirements CWZ in Clause 11of BS 6387: 1994 andachieved less than 0.5%HCl on the outer covering, binder tape & insulation when tested in accordance with BS EN 50267-2-1: 1999.Certificate No: 077b to BS 6387: 1994 and BS EN 50267-2-1: 1999FP300 fire resistant cable LSOH outer coveringNominal csa of conductor (mm 2 )CoreBS 6387 BS EN 50267-2-1 LPCB Ref. No.Construction (see note 1) (outer covering)1.0 2, 3 & 4 C, W, Z

PART 1: SECTION 8FIRE RESISTANT CABLESCertificate No: 077c to BS 6387: 1994, BS EN 50267-2-1: 1999 and IEC 60331-21: 1999 - Tests for electric cables under fireconditions - Circuit integrity - Part 21: Procedures and requirements - Cables rated up to and including 0,6/1,0 kV.FP100 Fire resistant single core cable for installation in conduitNominal csa of conductor (mm)CoreConstruction(see note 1)BS 6387(see notes 2 -4)BS EN 50267-2-1(outer covering)IEC 60331-21(see note 8)LPCB Ref.No.1.0 One C, W, Z 6)

PART 1: SECTION 8FIRE RESISTANT CABLESNominal csa of Core construction BS 6387 BS EN 50267-21 IEC 60331-21 LPCB Ref. No.conductor (mm 2 ) (see note 1) (see notes 2 to 4) (outer covering) (see note 7)6.0 one C,W,Z

PART 1: SECTION 8FIRE RESISTANT CABLES1) Solid conductor only.2) Stranded conductor only.3) In meeting the requirements of BS 7629-1: 2008, the FP200 Gold LSOH cables listed met the requirements of smoke density of BSEN 61034-2: 2005, fire resistance requirements CWZ in clause 11 of BS 6387: 1994 and achieved less than 0.5% HCI on theinsulation, binder tape & outer covering when tested in accordance with BS EN 50267-2-1: 1999.4) The duration of 30 min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15 min for the fire and impactphase and a further 15 min for the fire, impact and water phase.5) The FP200 Gold LSOH cables listed confirm to BS 7629-1: 2008, met Class PH30 when tested in acocrance with BW EN 50200:2006 and met 30 min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for astandard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2013.Certificate No: 077g to BS 7629-1: 2008, BS EN 50200: 2006 Class PH120, BS 8434-2: 2003+A2:2009 120 min and BS 5839-1:2002+A2:2008 Clause 26.2eFP PlusNominal csa of conductor(mm 2 )CoreConstruction(exluding drain wire &earth)BS 7629-1BS EN502001.0 (1) 2, 3 & 4 Complies (2) ClassPH1201.5 (1) 2, 3 & 4 Complies (2) ClassPH1202.5 (1) 2, 3 & 4 Complies (2) ClassPH120BS 8434-2BS 5839-1Clause26.2LPCB Ref.No.120min (3) Enhanced (4) 077g/01120min (3) Enhanced (4)120min (3) Enhanced (4)Uo/U 300/500VNotes:1) Solid conductor only.2) In meeting the requirements of BS 7629-1: 2008, the FP Plus cables listed met the requirements of smoke density of BS EN 61034-2:2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on insulation, binder tapeand outer covering when tested in accordance with BS EN 50267-2-1: 1999.3) The duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impact phaseand an additional 60min for the fire, impact and water phase.4) The FP Plus cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006 andmet the 120min duration when tested in accordance with BS 8434-2: 2003+A2:2009 and hence meet the requirements for anenhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.Certificate No: 077g to BS 7629-1: 2008, BS EN 50200: 2006 Class PH120, BS 8434-2: 2003+A2:2009 120min and BS 5839-1:2002+A2:2008 Clause 26.2eFP PlusNominal csa of conductor(mm 2 )Core Construction(excluding drain wire &earth)BS 7629-1BS EN502001.0 (1) 2 Complies (2) ClassPH1202.5 (1) 2 Complies (2) ClassPH120BS 8434-2BS 5839-1Clause26.2LPCB Ref.No.120min (3) Enhanced (4) 077g/02120min (3) Enhanced (4)Uo/U 300/500VNotes:1) Solid conductor only.2) In meeting the requirements of bs 7629-1: 2008, the FP Plus cables listed met the requirements of smoke density of BS EN 61034-2:2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the insulation, bindertape and outer covering when tested in accordance with BS EN 50267-2-1: 1999.3) The duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impactphase and an additional 60min for the fire, impact and water phase.4) The FP Plus cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006 andmet the 120min duration when tested in accordance with BS 8434-2 :2003+A2:2009 and hence met the requirements for anenhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.Certificate No: 077g to BS 7629-1: 2008, BS EN 50200: 2006 Class PH120, BS 8434-2: 2003+A2:2009 120min and BS 5839-1:2002+A2 2008 Clause 26.2e512 18 Jan 2014

PART 1: SECTION 8FIRE RESISTANT CABLESFP PlusNominal csa of conductor(mm 2 )Core construction(excluding drain wire &earth)BS 7629-1BS EN502001.5 (1) 2, 3 & 4 Complies (2) ClassPH1202.5 (1) 2, 3 & 4 Complies (2) ClassPH120BS 8434-2BS 5839-1Clause26.2LPCB Ref.No.120min (3) Enhanced (4) 077g/03120min (3) Enhanced (4)Uo/U 300/500VNotes:1 Solid conductor only.2. In meeting the requirements of BS 7629-1: 2008, the FP Plus cables listed met the requirements of smoke density of BS EN 61034-2:2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCI on the insulation, bindertape and outer covering when tested in accordance with BS EN 50267-2-1: 1999.3. The duration of 120 min when tested in accordance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impactphase and an additional 60min for the fire, impact and water phase.4. The FP Plus cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006 andmet the 120min duration when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met the requirements for anenhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.Certificate No: 077h to BS 7629-1: 1997 (Incorporating Amendment No.1), BS EN 50200: 2000 Class PH120, BS 8434-2: 2003120min and BS 5839-1: Clause 26.2eFP Plus FlexNominal csa of conductor(mm 2 )CoreConstruction(excludingdrainwire & earth)BS 7629-1(IncorporatingAmendmentNo.1)BS EN502001.0 2,3 & 4 Complies (1) ClassPH1201.5 2,3 & 4 Complies (1) ClassPH1202.5 2,3 & 4 Complies (1) ClassPH1204.0 2,3 & 4 Complies (1) ClassPH120BS 8434-2BS 5839-1Clause26.2LPCB Ref.No.120min (2) Enhanced (3) 077h/01120min (2) Enhanced (3)120min (2) Enhanced (3)120min (2) Enhanced (3)Uo/U 300/500VNotes:1) In meeting the requirements of BS 7629-1: 1997 (Incorporating Amendment No.1), the FP Plus Flex cables listed met therequirements of smoke density of BS EN 50268-2: 2000, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 andachieved less than 0.5%HCl on the outer covering, binder tape & insulation when tested in accordance with BS EN 50267-2-1: 1999.2) The duration of 120min when tested in accordance with BS 8434-2: 2003 is achieved by 60min for the fire and impact phase and anadditional 60min for the fire, impact and water phase as described in Clause 26.2e) of BS 5839-1: 2002.3) The FP Plus Flex cables listed conform to BS 7629-1: 1997 (Incorporating Amendment No.1), met Class PH120 when tested inaccordance with BS EN 50200: 2000 and met a duration of 120min when tested in accordance with BS 8434-2: 2003 and hence metthe requirements for an enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002.Certificate No: 077j to BS 7629-1: 1997 This certificate is to a withdrawn version of the BS 7629-1: 1997. Cables conforming tothis version of the standard may not be suitable for use within the jurisdiction of the European Union (EU).FP200 Gold LSOHNominal csa of conductor (mm 2 )CoreConstruction(excluding drain wire & earth)BS 7629-1(see Note 2)LPCB Ref. No.1.0 7 Complies 077j/011.5 7, 12 & 19 Complies2.5 7 & 12 CompliesUo/U 300/500VNotes:1) In meeting the requirements of BS 7629-1: 1997, the FP200 Gold LSOH cables listed met the requirements of smoke density of BS7622-2: 1993, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the outercovering, binder tape & insulation when tested in accordance with BS 6425-1: 1990.18 Jan 2014 513

PART 1: SECTION 8FIRE RESISTANT CABLES2) BS 7629-1: 1997 was amended in 2004 to implement the changes to the identification of cores by colours, in accordance with theCENELEC Harmonisation Document HD 308 S2. The un-amended version of the standard was withdrawn on 31 st March 2006.However, cables with the old identification colours, meeting the withdrawn version of the standard, are still requested by someregulators outside of the EU. Certification to the un-amended version of the standard has therefore been maintained, for the timebeing, to satisfy the requirements of these regulators.Certificate 077a covers cables certified in accordance with BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2)Certificate No: 077j to BS 7629-1: 1997 This certificate is to a withdrawn version of the BS 7629-1: 1997. Cables conforming tothis version of the standard may not be suitable for use within the jurisdiction of the European Union (EU).FP200 FlexNominal csa of conductor (mm 2 )CoreConstruction(excluding drain wire & earth)BS 7629-1(see Note 2)LPCB Ref. No.1.0 2, 3 & 4 Complies 077j/021.5 2, 3 & 4 Complies2.5 2, 3 & 4 CompliesUo/U 300/500VNotes:1) In meeting the requirements of BS 7629-1: 1997, the FP200 Flex cables listed met the requirements of smoke density of BS 7622-2:1993, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the outer covering,binder tape & insulation when tested in accordance with BS 6425-1: 1990.2) BS 7629-1: 1997 was amended in 2004 to implement the changes to the identification of cores by colours, in accordance with theCENELEC Harmonisation Document HD 308 S2. The un-amended version of the standard was withdrawn on 31 st March 2006.However, cables with the old identification colours, meeting the withdrawn version of the standard, are still requested by someregulators outside of the EU. Certification to the un-amended version of the standard has therefore been maintained, for the timebeing, to satisfy the requirements of these regulators.Certificate 077a covers cables certified in accordance with BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2)Certificate No: 077k to BS 7626-1:1997. This certificate is to a withdrawn version of the BS 7929-1:1997. Cables conforming tothis version of the standard may not be suitable for use within the juristiction of the European Union (EU), BS EN 50200:2006,BS EN 50200:2006 Annex E and BS 5839-1 2013.FP200 Gold LSOHNominal csa of conductor(mm 2 )CoreConstruction(excludingdrainwire & earth)1.0 (1) 2, 3 & 4 Complies (3,1.5 (1) 2, 3 & 4 Complies (3,2.5 (1) 2, 3 & 4 Complies (3,4.0 (2) 2, 3 & 4 Complies (3,BS 7629-1 BS EN 50200 BS EN50200Annex E4)4)4)4)BS 5839-1Clause26.2LPCB Ref.No.Class PH30 30 min Standard 077k/01Class PH30 &PH60Class PH30 &PH60Class PH30 &PH6030 min Standard30 min Standard30 min StandardUo/U 300/500VNotes:1) Solid conductor only.2) Stranded conductor only.3) In meeting the requirements of BS 7629-1:1997, the FP200 Gold LSOH cables listed met the requirements of smoke density of BSEN 61034-2:2005, fire resistance requirements CWZ in Clause 11 of BS 6387:1994 and achieved less than 0.5%HCl on the(insulation, binder tape & outer covering) when tested in accordance with BS EN 50267-2-1:1999.4) BS 7629-1:1997 was amended in 2004 to implement the changes to the identification of cones by colours, in accordance withCENELEC Hammonisation Document HD 308 S2. The un-amended version of the standard was withdrawn on 31st March 2006.However, cables with the old identification colours, meeting the withdrawn version of the standard, are still requested by someregulators outside of the EU. Certification to the un-amended version of the standard has therefore been maintained, for the timebeing, to satisfy the requirements of these regulators.5) The duration of 30 min when tested in accordance with BS EN 50200:2006 Annex E is achieved by 15 min for the fire and impactpahse and a further 15 min for the fire, impact and water phase.6) The FP200 Gold LSOH cables listed conform to BS 7629-1:1997, met Class PH30 when tested in accordance with BS EN50200:2006 and met the 30min duration when tested in accordance with BS EN 50200:2006 Annex E and hence met therequirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1:2013514 18 Jan 2014

PART 1: SECTION 8FIRE RESISTANT CABLES.Certificate 077f covers cables certified in accordance with BS 7629-1:2008.Certificate No: 077m to BS 7346-6: 2005, BS 8491: 2008, BS EN 50267-2-1: 1999 and BS EN 61034-2: 2005FP600Nominal csa ofconductor (mm 2 )CoreconstructionBS 7346-6 (firesurvival time)BS 8491 (fire survivaltime see note 2)BS EN50267-2-1BS EN61034-2LPCB Ref.No.4.0 (1) 2, 3 & 4 120min 120min 60% 077m/016.0 (1) 2, 3 & 4 120min 120min 60%10 (1) 2, 3 & 4 120min 120min 60%16 (1) 2, 3 & 4 120min 120min 60%25 (1) 2, 3 & 4 120min 120min 60%35 (1) 2, 3 & 4 120min 120min 60%50 (1) 2, 3 & 4 120min 120min 60%70 (1) 2, 3 & 4 120min 120min 60%Uo/U 600/1000VNotes:1) Stranded conductor only.2) In achieving 120min fire survival time in accordance with BS 7346-6: 2005, the FP600 cables listed also achieved a 120min firesurvival time in accordance with BS 8491: 2008. The test method given in BS 8491: 2008 is technically identical to the test methodgiven in BS 7346: 2005 Annex B.Certificate No: 077n to BS 8491: 2008, BS EN 50267-2-1: 1999 and BS EN 61034-2: 2005FP600SNominal csa of conductor(mm 2 )Core construction (see note2)BS8491BS EN 50264-2-1BS EN 61034-2LPCB Ref.No.10 2, 3 & 4 120min 60% 077n/0116 2, 3 & 4 120min 60%2.5 7 120min 60%25 2, 3 & 4 120min 60%35 2, 3 & 4 120min 60%4.0 2, 3 & 4 120min 60%50 2, 3 & 4 120min 60%6.0 2, 3 & 4 120min 60%70 2 & 3 120min 60%Uo/U 600/1000VNotes:1) Stranded conductor only.2) All 2 core cables have the blue core designated as a Neutral conductor; only phase to earth voltage was applied.Certificate No: 077p to BS 6387: 1994, IEC 60331-21: 1999, BS EN 50267-2-1: 1999 and BS EN 61034-2: 2005FP100 LSOHNominal csa of conductor(mm 2 )Coreconstruction(see note 1)BS 5387(see notes2-4)BS EN 50267-2-1BS EN61034-2IEC 60331-21(see note 5)LPCB Ref.No.1.5 One C,W,Z 60% Complies 077p/012.5 One C,W,Z 60% Complies4.0 One C,W,Z 60% Complies6.0 One C,W,Z 60% Complies10 One C,W,Z 60% CompliesUo/U 450/750 VNotes:1. Stranded conductor only.2. Clauses 8 (Bending) and 9.1 & 9.2 (Impact) cannot be donducted due to the cable having only one core.3. The FP100 LSOH cables also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387.18 Jan 2014 515

PART 1: SECTION 8FIRE RESISTANT CABLES4. Where a single cable is fitted in a conduit, only phase to earth voltage was applied.5. To satisfy the requirement of BS 6387, testing for C,W,Z categories was conducted using a 20mm stainless steel conduit as the othermetallic element.6. The FP100 LSOH cables me the requirements of IEC 60331-21: 1999 when tested at a temperature of 950 o C for a duration of 90mins+ 15mins cool down, at a voltage rating of 600V.Prysmian Cables & Systems LimitedEnergy Cables Unit, Wrexham Industrial Estate, Wrexham LL13 9PH, United KingdomTel: +44 (0)1978 662345 • Fax: +44 (0)1978 662292E-mail: cables.marketing.uk@prysmian.com • Website: www.prysmian.co.ukCertificate No: 517a to BS 6387: 1994, BS EN 50267-2-1: 1999 and IEC 60331-21: 1999FP300 Single Core LSZH CableNominal csa ofCoreBS 6387BS EN 50267-2-1 IEC 60331-21 LPCB Ref. No.conductor (mm 2 ) Construction (see notes 1 to 4) (outer covering) (see note 6)50 One C

PART 1: SECTION 8FIRE RESISTANT CABLESFP600SNominal csa of conductor (mm 2 ) Core construction BS 8491 BS EN 50267-2-1 BS EN 61034-2 LPCB Ref. No.(see note 2)70 (1) 4 120min 60% 517c/0195 (1) 2, 3 & 4 120min 60%120 (1) 2, 3 & 4 120min 60%150 (1) 2, 3 & 4 120min 60%185 (1) 2, 3 & 4 120min 60%240 (1) 2, 3 & 4 120min 60%300 (1) 2, 3 & 4 120min 60%400 (1) 2, 3 & 4 120min 60%Uo/U 600/1000VNotes:1) Stranded conductor only.2) All 2 core cables have the blue core designated as a Neutral conductor, only phase to earth voltage was applied.RAMCRO S.p.A. Trading as B3 Cables SolutionVia Marzorati, 15 - 20014 Nerviano, Milan, ItalyTel: +39 0331 406560 • Fax: +39 0331 406559E-mail: ramcro@ramcro.it • Website: www.ramcro.itCertificate No: 568a to BS 6387: 1994 and EN 50267-2-1: 1999Ramfirecro-F3Nominal csa ofCoreBS 6387 EN 50267-2-1LPCB Ref. No.conductor (mm 2 )Construction(outer covering)1.0 (1) 2, 3 & 4 C, W, Z

PART 1: SECTION 8FIRE RESISTANT CABLES5) The Ramfirecro-F3 Standard cables listed conform to BS 7629-1: 1997, met Class PH30 when tested in accordance with BS EN50200: 2000 and met a duration of 30min when tested in accordance with BS 8434-1: 2003 and hence met the requirements for astandard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002.6) BS 7629-1: 1997 was amended in 2004 to implement the changes to the identification of cores by colours, in accordance with theCENELEC Harmonisation Document HD 308 S2. The un-amended version of the standard was withdrawn on 31 st March 2006.However, cables with the old identification colours, meeting the withdrawn version of the standard, are still requested by someregulators outside of the EU. Certification to the un-amended version of the standard has therefore been maintained, for the timebeing, to satisfy the requirements of these regulators.Certificate 568c covers cables certified in accordance with BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2)Certificate No: 568c to BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), BS EN 50200: 2000 Class PH30, BS 8434-1:2003 30min and BS 5839-1: 2002 Clause 26.2dRamfirecro-F3 StandardNominal csa ofCoreconductor (mm²) Construction(excluding drainwire & earth)BS 7629-1(IncorporatingAmendmentsNos. 1 and 2)BS EN 50200 BS 8434-1 BS 5839-1Clause 26.2LPCB Ref. No.1.0 (1) 2, 3 & 4 Complies (3) Class PH30 30min (4) Standard (5) 568c/011.5 (1) 2, 3 & 4 Complies (3) Class PH30 30min (4) Standard (5)2.5 (1) 2, 3 & 4 Complies (3) Class PH30 30min (4) Standard (5)4.0 (2) 2, 3 & 4 Complies (3) Class PH30 30min (4) Standard (5)Uo/U 300/500VNotes:1) Solid and Stranded conductors.2) Stranded conductor only.3) In meeting the requirements of BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), the Ramfirecro-F3 Standard cables listedmet the requirements of smoke density of BS EN 50268-2: 2000 and achieved less than 0.5%HCl on the insulation, binder tape &outer covering when tested in accordance with BS EN 50267-2-1: 1999.4) The duration of 30min when tested in accordance with BS 8434-1: 2003 is achieved by 15min for the fire and impact phase and anadditional 15min for the fire, impact and water phase as described in Clause 26.2d) of BS 5839-1: 2002.5) The Ramfirecro-F3 Standard cables listed conform to BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), met Class PH30when tested in accordance with BS EN 50200: 2000 and met a duration of 30min when tested in accordance with BS 8434-1: 2003and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002.Certificate No: 568d to IEC 60331-21: 1999, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005Ramfirecro-F3 IEC 60331Nominal csa of Core construction IEC 60331-21 BS EN 50267-2-1 BS EN 61034-2 LPCB Ref. No.conductor (mm²) (excluding drainwire & earth)1.0 (1) 2, 3 & 4 Complies 60% 568d/011.5 (1) 2, 3 & 4 Complies 60%2.5 (1) 2, 3 & 4 Complies 60%Uo/U 300/500VNotes:1) Solid and Stranded conductors.Shakun Polymers Limited(Cable Division), Plot No. 4, Silver Industrial Estate, Bhimpore, Patalia Road, Daman 396 210, IndiaTel: +91 260 222 1538 • Fax: +91 260 222 1199E-mail: technical@shakunpolymers.com • Website: www.shakuncables.comCertificate No: 978a to BS 7629-1: 2008, BS 6387: 1994, BS EN 50200: 2006 Class PH30, BS EN 50200: 2006 Annex E and BS5839-1: 2002+A2:2008 Clause 26.2d518 18 Jan 2014

Fr TekNominalcsa ofconductor (mm 2 )Core construction(excluding drainwire and earth)BS 7629-1 BS6387 BS EN 50200 BS EN 50500Annex EPART 1: SECTION 8FIRE RESISTANT CABLESBS 5839-1Clause 26:2LPCB Ref. No.1.5 (1) 2 Complies (2) C,W,Z Class PH30 30min (3) Standard (4) 978a/01Uo/U 300/500VNotes:1) Solid conductor only.2) In meeting the requirements of BS 7629-1: 2008, the FrTek cable listed met the requirements of smoke density of BS EN 61034-2:2005 and achieved less than 0.5%HCI on the insulation, binder tape and outer covering when tested in accordance with BS EN50267-2-1: 1999.3) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impactphase and an additional 15min for the fire, impact and water phase.4) The FrTek cable listed conform to BS 7629-1: 2008, met Class PH30 when tested in accordance with BS EN 50200: 2006 and metthe 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for a standard fireresistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.Certificate No: 978b to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005 and IEC 60331-21: 1999FrTek 10Nominalcsa ofconductor (mm2 )CoreConstruction(see note 1)BS 6387(See notes 2 -4)BS EN 50267-2-1BS EN 61034-2IEC 60331-21(See Note 5)LPCB Ref.No.1.0 One C, W, Z 60% Complies 978b/011.5 One C, W, Z 60% Complies2.5 One C, W, Z 60% Complies4.0 One C, W, Z 60% Complies6.0 One C, W, Z 60% CompliesUo/U 600/1000VNotes:1) Stranded conductor only.2) Clauses 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core.3) These cables also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387.4) To satisfy the requirement of BS 6387, testing for C, W & Z categories were conducted using a 20mm stainless steel conduit as theother metallic element.5) These cables met the requirements of IEC 60331-21: 1999 when tested att a temperature of 750 o C for a duration of 90mins + 15minscool down, at a voltage rating of 600V.SHIELD FIRE, SAFETY AND SECURITY LIMITEDRedburn House 2a, Tonbridge Road, Romford, Essex RM13 8QY, United KingdomTel: +44 1708 377731 • Fax: +44 1708 347637E-mail: shielduk@shieldglobal.com • Website: www.shieldglobal.comCertificate No: 682c-(c1-2) to BS6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005, BS EN 50200: 2006 and BS EN 50200:2006 Annex EShield-UK PremiumNominal Core constructioncsa of(excludingconductordrain wire)(mm 2 )BS6387BS EN 50267-2-1BS EN61034-2BS EN50200Annex EBS EN502000.5 2, 3 & 4 C,W,Z 60% 30min ClassPH1200.75 2, 3 & 4 C,W,Z 60% 30min ClassPH1201.0 2, 3 & 4 C,W,Z 60% 30min ClassPH1201.5 2, 3 & 4 C,W,Z 60% 30min ClassPH120LPCB Ref.No.682c/0118 Jan 2014 519

PART 1: SECTION 8FIRE RESISTANT CABLESNominalcsa ofconductor(mm 2 )Core construction(excludingdrain wire)BS6387BS EN 50267-2-1BS EN61034-2BS EN50200Annex EBS EN502002.5 2, 3 & 4 C,W,Z 60% 30min ClassPH1204.0 2, 3 & 4 C,W,Z 60% 30min ClassPH120LPCB Ref.No.Uo/U 300/500VNotes:1. Solid conductor only.2 Stranded conductor only.3. The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impactphase and an additional 15min for the fire, impact and water phase.SHIELD FIRE, SAFETY AND SECURITY LTDRedburn House, 2a Tonbridge Road, Romford, Essex RM3 8QE, United KingdomTel: +44 207 712 1610 • Fax: +44 207 712 1578E-mail: shielduk@shieldglobal.com • Website: www.shieldglobal.comCertificate No: 682a-(cl-5) to BS 7629-1: 2008, BS 5839-1: 2013 Clause 26.2d, BS EN 50200: 2006 Annex E andBS EN 50200: 2006 Class PH120Shield-UKNominal csa ofconductor (mm²)Core construction(excluding drain wire &earth)BS 7629-1BS EN502001.0 (1) 2, 3 & 4 Complies (3) ClassPH1201.5 (1) 2, 3 & 4 Complies (3) ClassPH1202.5 (1) 2, 3 & 4 Complies (3) ClassPH1204.0 (2) 2, 3 & 4 Complies (3) ClassPH120BS EN 50200Annex EBS 5839-1Clause 26.2LPCB Ref.No.30min (4) Standard (5) 682a/0130min (4) Standard (5)30min (4) Standard (5)30min (4) Standard (5)Uo/U 300/500VNotes:1) Solid conductor only.2) Stranded conductor only.3) In meeting the requirements of BS 7629-1: 2008, the Shield-UK cables listed met the requirements of smoke density of BS EN 61034-2: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the insulation, bindertape and outercovering when tested in accordance with BS EN 50267-2-1: 1999.4) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impactphase and an additional 15min for the fire, impact and water phase.5) The Shield-UK cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006 andmet the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for a standardfire resistant cable as described in Clause 26.2 of BS 5839-1 :2013.Tai Sin Electric Limited24 Gul Crescent, Jurong Town, Singapore 629531, SingaporeTel: +65 6861 3401 • Fax: +65 6861 4084E-mail: kokfong@taisin.com.sg • Website: www.taisin.com.sgCertificate No: 982a to BS 7629-1: 2008, BS 6387: 1994, BS 5839-1: 2002+A2:2008 Clause 26.2e, BS EN 50200: 2006 Class PH120and BS 8434-2: 2003+A2:2009 120min520 18 Jan 2014

FRA-XOL (E)Nominal csa ofconductor (mm 2 )Core construction(excluding drainwire and earth)BS 7629-1 BS 6387 BS EN 50200 BS 8434-2 BS 5839-1Clause 26.2PART 1: SECTION 8FIRE RESISTANT CABLESLPCB Ref. No.1.0 (1) 2, 3 & 4 Complies (3) C,W,Z Class PH120 120min (4) Enhanced (5) 982a/011.5 (1) 2, 3 & 4 Complies (3) C,W,Z Class PH120 120min (4) Enhanced (5)2.5 (1) 2, 3 & 4 Complies (3) C,W,Z Class PH120 120min (4) Enhanced (5)4.0 (2) 2, 3 & 4 Complies (3) C,W,Z Class PH120 120min (4) Enhanced (5)Uo/U 300/500VNotes:1) Solid conductor only.2) Stranded conductor only.3) In meeting the requirements of BS 7629-1: 2008, the FRA-XOL (E) cables listed met the requirements of smoke density of BS EN61034-2: 2005 and achieved less than 0.5%HCI on the insulation, binder tape and outer covering when tested in accordance with BSEN 50267-2-1: 1999.4) The duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impact phaseand an additional 60min for the fire, impact and water phase.5) The FRA-XOL (E) cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006and met the 120min duration when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met the requirements for anenhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.Certificate No: 982b to BS 7629-1: 1997 This certificate is to a withdrawn version of the BS 7629-1: 1997. Cables conforming tothis version of the standard may not be suitable for use within the jurisdication of the European Union (EU), BS 6387: 1994,BS 5839-1: 2002+A2:2008 Clause 26.2e, BS EN 50200: 2006 Class PH120 and BS 8434-2: 2003+A2:2009 120minFRA-XOL (E)Nominal csa ofconductor (mm 2 )Core construction(excluding drainwire and earth)BS 7629-1(see note 6)BS6387 BS EN 50200 BS 8434-2 BS 5839-1Clause 26.2LPCB Ref. No.1.0 (1) 2, 3 & 4 Complies (3) C,W,Z Class PH120 120min (4) Enhanced (5) 982b/011.5 (1) 2, 3 & 4 Complies (3) C,W,Z Class PH120 120min (4) Enhanced (5)2.5 (1) 2, 3 & 4 Complies (3) C,W,Z Class PH120 120min (4) Enhanced (5)4.0 (2) 2, 3 & 4 Complies (3) C,W,Z Class PH120 120min (4) Enhanced (5)Uo/U 300/500VNotes:1) Solid conductor only.2) Stranded conductor only.3) In meeting the requirements of BS 7629-1: 1997, the FRA-XOL (E) cables listed met the requirements of smoke density of BS EN50268-2: 2000 and achieved less than 0.5%HCI on the insulation, binder tape and outer covering when tested in accordance with BSEN 50267-2-1: 1999.4) The duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impact phaseand an additional 60min for the fire, impact and water phase.5) The FRA-XOL (E) cables listed conform to BS 7629-1: 1997, met Class PH120 when tested in accordance with BS EN 50200: 2006and met the 120min duration when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met the requirements for anenhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.6) BS 7629-1: 1997 was amended in 2004 to implement the changes to the identification of cores by colours, in accordance with theCENELEC Harmonisation Document HD 308 S2. The un-amended version of the standard was withdrawn on 31st March 2006.However, cables with the old identification colours, meeting the withdrawn version of the standard, are still requested by someregulators outside of the EU. Certification to the un-amended version of the standard has therefore been maintained, for the timebeing, to satisfy the requirements of these regulators.Certificate 982a covers cables certified in accordance with BS 7629-1: 2008TELE-FONIKA Kable Sp. z o.o., S.K.A.ul.Wielicka 114, 30-663 Krakow, PolandTel: +48 12 652 50 00 • Fax: +48 12 652 51 56E-mail: robert.slapak@tfkable.pl • Website: www.tfkable.plCertificate No: 814f to BS 7629-1: 1997 This certificate is to a withdrawn version of the BS 7629-1: 1997. Cables conforming tothis version of the standard may not be suitable for use within the jurisdiction of the European Union (EU), BS 6387: 1994, BS5839-1: 2013 Clause 26.2d, EN 50200: 2006 Class PH30 and EN 50200: 2006 Annex E.18 Jan 2014 521

PART 1: SECTION 8FIRE RESISTANT CABLESFLAME-X 950Nominalcsa ofconductor (mm 2 )Core Constructiondrainwire & earth)BS 7629-1note 6)BS 6387 EN 50200 EN 50200Annex EBS 5839-1Clause 26.2LPCB Ref. No.1.0 (1) 2, 3, 4 & 7 Complies (3) C,W,Z Class PH30 30min (4) Standard (5) 814f/011.5 (1) 2, 3, 4, 7, 12 & 19 Complies (3) C,W,Z Class PH30 30min (4) Standard (5)2.5 (1) 2, 3, 4, 7 & 12 Complies (3) C,W,Z Class PH30 30min (4) Standard (5)4.0 (2) 2, 3 & 4 Complies (3) C,W,Z Class PH30 30min (4) Standard (5)Uo/U 300/500VNotes:1. Solid conductor only.2. Stranded conductor only.3. In meeting the requirements of BS 7629-1: 1997, the FLAME-X 950 cables listed met the requirements of smoke density of EN61034-2: 2005 and achieved less than 0.5%HCl on the insulation, binder tape & outer covering when tested in accordance with EN50267-2-1: 1999.4. The duration of 30min when tested in accordance with EN 50200: 2006 Annex E is achieved by 15min for the fire and impact phaseand an additional 15min for the fire, impact and water phase.5. The FLAME-X 950 cables listed conform to BS 7629-1: 1997, met Class PH30 when tested in accordance with EN 50200: 2006and met the 30min duration when tested in accordance with EN 50200: 2006 Annex E and hence met the requirements for astandard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2013.6. BS 7629-1: 1997 was amended in 2004 to implement the changes to the identification of cores by colours, in accordance with theCENELEC Harmonisation Document HD 308 S2. The un-amended version of the standard was withdrawn on 31st March 2006.However, cables with the old identification colours, meeting the withdrawn version of the standard, are still requested by someregulators outside of the EU. Certification to the un-amended version of the standard has therefore been maintained, for the timebeing, to satisfy the requirements of these regulators.Certificate 814a covers cables certified in accordance with BS 7629-1: 2008Certificate No: 814g to BS 7629-1: 1997 This certificate is to a withdrawn version of the BS 7629-1: 1997. Cables conforming tothis version of the standard may not be suitable for use within the jurisdiction of the European Union (EU), BS 6387: 1994, BS5839-1: 2013 Clause 26.2e, EN 50200: 2006 Class PH120 and BS 8434-2: 2003+A2:2009.FLAME-X 950 EnhancedNominal Core constructioncsa of (excluding drainconductor (mm 2 ) wire and earth)BS 7629-1(see note 6)BS 6387 EN 50200 BS 8434-2 BS 5839-1Clause 26.2LPCB Ref. No.1.0 (1) 2, 3 & 4 Complies (3) C,W,Z Class PH120 120min (4) Enhanced (5) 814g/011.5 (1) 2, 3 & 4 Complies (3) C,W,Z Class PH120 120min (4) Enhanced (5)2.5 (1) 2, 3 & 4 Complies (3) C,W,Z Class PH120 120min (4) Enhanced (5)4.0 (2) 2, 3 & 4 Complies (3) C,W,Z Class PH120 120min (4) Enhanced (5)Uo/U 300/500VNotes:1. Solid conductor only.2. Stranded conductor only.3. In meeting the requirements of BS 7629-1: 1997, the FLAME-X 950 Enhanced cables listed met the requirements of smoke densityof EN 61034-2: 2005 and achieved less than 0.5%HCl on the insulation, binder tape & outer covering when tested in accordancewith EN 50267-2-1: 1999.4. The duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impactphase and an additional 60min for the fire, impact and water phase.5. The FLAME-X 950 Enhanced cables listed conform to BS 7629-1: 1997, met Class PH120 when tested in accordance with EN50200: 2006 and met the 120min duration when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met therequirements for an Enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2013.6. BS 7629-1: 1997 was amended in 2004 to implement the changes to the identification of cores by colours, in accordance with theCENELEC Harmonisation Document HD 308 S2. The un-amended version of the standard was withdrawn on 31st March 2006.However, cables with the old identification colours, meeting the withdrawn version of the standard, are still requested by someregulators outside of the EU. Certification to the un-amended version of the standard has therefore been maintained, for the timebeing, to satisfy the requirements of these regulators.Certificate 814b covers cables certified in accordance with BS 7629-1: 2008Certificate No: 814b to BS 7629-1: 2008, BS 6387: 1994, EN 50200: 2006 Class PH120, BS 8434-2: 2003+A2:2009 and BS 5839-1:2013 Clause 26.2e522 18 Jan 2014

FLAME-X 950 EnhancedNominal Core Constructioncsa of (excluding drainconductor (mm 2 ) wire & earth)BS 7629-1 BS 6387 EN 50200 BS 8434-2 BS 5839-1Clause 26.2PART 1: SECTION 8FIRE RESISTANT CABLESLPCB Ref. No.1.0 (1) 2, 3 & 4 Complies (3) C,W,Z Class PH120 120min (4) Enhanced (5) 814b/011.5 (1) 2, 3 & 4 Complies (3) C,W,Z Class PH120 120min (4) Enhanced (5)2.5 (1) 2, 3 & 4 Complies (3) C,W,Z Class PH120 120min (4) Enhanced (5)4.0 (2) 2, 3 & 4 Complies (3) C,W,Z Class PH120 120min (4) Enhanced (5)Uo/U 300/500VNotes:1. Solid conductor only.2. Stranded conductor only.3. In meeting the requirements of BS 7629-1: 2008, the FLAME-X 950 Enhanced cables listed met the requirements of smoke density ofEN 61034-2: 2005 and achieved less than 0.5%HCl on the insulation, binder tape & outer covering when tested in accordance withEN 50267-2-1: 1999.4. The duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impactphase and an additional 60min for the fire, impact and water phase.5. The FLAME-X 950 Enhanced cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with EN50200: 2006 and met the 120min duration when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met therequirements for an Enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2013.Certificate No: 814a to BS 7629-1: 2008, BS 6387: 1994, EN 50200: 2006 Class PH30, EN 50200: 2006 Annex E and BS 5839-1:2013 Clause 26.2d.FLAME-X 950Nominalcsa ofconductor (mm 2 )Core Constructiondrainwire & earth)BS 7629-1 BS 6387 EN 50200 EN 50200Annex EBS 5839-1Clause 26.2LPCB Ref. No.1.0 (1) 2, 3, 4 & 7 Complies (3) C,W,Z Class PH30 30min (4) Standard (5) 814a/011.5 (1) 2, 3, 4, 7, 12 & 19 Complies (3) C,W,Z Class PH30 30min (4) Standard (5)2.5 (1) 2, 3, 4, 7 & 12 Complies (3) C,W,Z Class PH30 30min (4) Standard (5)4.0 (2) 2, 3 & 4 Complies (3) C,W,Z Class PH30 30min (4) Standard (5)Uo/U 300/500VNotes:1. Solid conductor only.2. Stranded conductor only.3. In meeting the requirements of BS 7629-1: 2008, the FLAME-X 950 cables listed met the requirements of smoke density of EN61034-2: 2005 and achieved less than 0.5%HCl on the insulation, binder tape & outer covering when tested in accordance with EN50267-2-1: 1999.4. The duration of 30min when tested in accordance with EN 50200: 2006 Annex E is achieved by 15min for the fire and impact phaseand an additional 15min for the fire, impact and water phase.5. The FLAME-X 950 cables listed conform to BS 7629-1: 2008, met Class PH30 when tested in accordance with EN 50200: 2006 andmet the 30min duration when tested in accordance with EN 50200: 2006 Annex E and hence met the requirements for a standard fireresistant cable as described in Clause 26.2 of BS 5839-1: 2013.Certificate No: 814c to BS 6387: 1994, BS EN 50267-2-1: 1999 and IEC 60331-21: 1999Flame-X 950 SingleNominalCorecsa ofConstructionconductor (mm 2 )BS 6387(See Notes 2, 6 & 7)BS EN 50267-2-1 IEC 60331-21(See Note 8)LPCB Ref. No.1.5 (1) One C, W, Z (3)

PART 1: SECTION 8FIRE RESISTANT CABLESNominalcsa ofconductor (mm 2 )CoreConstructionBS 6387(See Notes 2, 6 & 7)BS EN 50267-2-1 IEC 60331-21(See Note 8)240 (1) One C (4)

PART 1: SECTION 8FIRE RESISTANT CABLESNominalCore construction BS 7846 LPCB Ref. No.csa ofconductor (mm 2 )70 (1) 2, 3 & 4 F2 (2,3)95 (1) 2, 3 & 4 F2 (2,3)120 (1) 2, 3 & 4 F2 (2,3)150 (1) 2, 3 & 4 F2 (2,3)185 (1) 2, 3 & 4 F2 (2,3)240 (1) 2, 3 & 4 F2 (2,3)300 (1) 2, 3 & 4 F2 (2,3)Uo/U 600/1000VNotes:1) Stranded conductor only2) In meeting the requirements of BS 7846: 2000 Category F2, the FLAME-X Power cables listed met the requirements for fireresistance characteristics Category CWZ specified in Clause 11 of BS 6387: 19943) BS 7846: 2000 was amended in 2004 to implement the changes to the identification of cores by colours, in accordance with theCENELEC Harmonisation Document HD 308 S2. The un-amended version of the standard was withdrawn on 31 st March 2006.However, cables with the old identification colours, meeting the withdrawn version of the standard, are still requested by someregulators outside of the EU. Certification to the un-amended version of the standard has therefore been maintained, for the timebeing, to satisfy the requirements of these regulators.Certificate 814d covers cables certified in accordance with BS 7846: 2000 (Incorporating Amendments Nos. 1 & 2)Tratos Cavi SpAVia Stadio 2, Pieve S. Stefano 52036, Arezzo, ItalyTel: +39 0575 7941 • Fax: +39 0575 798026E-mail: direzione@tratos.it • Website: www.tratos.itCertificate No: 222a to BS 7629-1: 2008, EN 50200: 2000 Class PH30, BS 8434-1: 2003 30min & BS 5839-1: 2013 Clause 26.2dFIRESAFE TW950Nominal csaof conductor (mm 2 )CoreConstruction(excluding drainwire & earth)BS 7629-1 EN 50200 EN 50200Annex EBS 5839-1Clause 26.2LPCB Ref. No.1.0 (1) 2, 3 & 4 Complies (3) Class PH30 30min (4) Standard (5) 222a/011.5 (1) 2, 3 & 4 Complies (3) Class PH30 30min (4) Standard (5)2.5 (2) 2, 3 & 4 Complies (3) Class PH30 30min (4) Standard (5)4.0 (2) 2, 3 & 4 Complies (3) Class PH30 30min (4) Standard (5)Uo/U 300/500VNotes:1. Solid conductor only.2. Stranded conductor only.3. In meeting the requirements of BS 7629-1:2008, the FIRESAFE TW950 cables listed met the requirements of smoke density of EN61034-2:2005, fire resistance requirements CWZ in Clause 11 of BS 6387:1994 and achieved less than 0.5%HCl (outer covering,binder tape & insulation) when tested in accordance with EN 50267-2-1:1999.4. The duration of 30min when tested in accordance with EN 50200:2006 Annex E is achieved by 15min for the fire and impact phaseand an additional 15min for the fire, impact and water phase.5. The FIRESAFE TW950 cables listed conform to BS 7629-1:2008, met Class PH30 when tested in accordance with EN 50200:2006and met the 30min duration when tested in accordance with EN 50200:2006 Annex E and hence met the requirements for a standardfire resistant cable as described in Clause 26.2 of BS 5839-1:2013.Certificate No: 222b to BS 7629-1: 2008, EN 50200: 2006 Class PH120, BS 8434-2: 2003 120min & BS 5839-1: 2002 Clause 26.2eFIRESAFE TW950ENominal csaof conductor (mm 2 )CoreConstruction(excluding drainwire & earth)BS 7629-1 EN 50200 BS 8434-2 BS 5839-1Clause 26.2LPCB Ref. No.1.0 (1) 2, 3 & 4 Complies (3) Class PH120 120min (4) Enhanced (5) 222b/0118 Jan 2014 525

PART 1: SECTION 8FIRE RESISTANT CABLESNominal csaof conductor (mm 2 )CoreConstruction(excluding drainwire & earth)BS 7629-1 EN 50200 BS 8434-2 BS 5839-1Clause 26.21.5 (1) 2, 3 & 4 Complies (3) Class PH120 120min (4) Enhanced (5)2.5 (2) 2, 3 & 4 Complies (3) Class PH120 120min (4) Enhanced (5)4.0 (2) 2, 3 & 4 Complies (3) Class PH120 120min (4) Enhanced (5)LPCB Ref. No.Uo/U 300/500VNotes:1. Solid conductor only.2. Stranded conductor only.3. In meeting the requirements of BS 7629-1:2008 the FIRESAFE TW950E cables listed met the requirements of smoke density of EN61034-2:2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 994 and achieved less than 0.5%HCl (outer coveringbinder tape and insulation) when tested in accordance with EN 50267-2-1:1999.4. The duration of 120min when tested in accordance with BS 8434-2:2003+A2:2009 is achieved by 60min for the fire and impact phaseand an additional 60min for the fire, impact and water phase.5. The FIRESAFE TW950E cables listed conform to BS 7629-1:2008, met Class PH120 when tested in accordance with EN 50200:2006and met a duration of 120min when tested in accordance with BS 8434-2:2003+A2:2009 and hence met the requirements for anenhanced fire resistant cable as described in Clause 26.2 of BS 5839-1:2013.Turk Prysmian Kablo ve Sistemleri A.S.Omerbey Mah, Bursa Asfalti Cad. No: 51, 16941 Mudanya, Bursa, TurkeyTel: 00 90 224 270 3000 • Fax: 0090 224 270 3030E-mail: tpks@prysmiangroup.com • Website: www.prysmian.com.trCertificate No: 1151a to BS EN 60332-1-2: 2004, BS EN 60332-3-24: 2009, BS EN 61034-2: 2005, BS EN 50267-2-1: 1999, BS EN50267-2-2: 1999 and BS EN 50267-2-3: 1999AFUMEX NHXMHNominal csa ofconductor (mm 2 )CoreconstructionBS EN60332-1-2BS EN60332-3-24BS EN50267-2-1BS EN50267-2-3(see note 3)BS EN61034-2LPCB Ref.No.1.5 (1) 2, 3, 4 & 5 Complies Complies 60% 1151a/0110 (1) 2, 3, 4 & 5 Complies Complies 60%16 (2) 2, 3, 4 & 5 Complies Complies 60%2.5 (1) 2, 3, 4 & 5 Complies Complies 60%4.0 (1) 2, 3, 4 & 5 Complies Complies 60%6.0 (1) 2, 3, 4 & 5 Complies Complies 60%U0/U 300/500VNotes:1. Solid conductor only.2. Stranded conductor only.3. In achieving a weighted average of pH greater than 4.3 and a weighted average of Conductivity less than 10µS/mm on theconstituent materials when tested in accordance with BS EN 50267-2-3: 1999, the AFUMEX NHXMH cables listed also met therequirements of BS EN 50267-2-2: 1999.Certificate No: 1151b to BS EN 60332-1-2: 2004, BS EN 60332-3-24: 2009, BS EN 61034-2: 2005. BS EN 50267-2-1: 1999, BS EN50267-2-2: 1999 and BS EN 50267-2-3: 1999AFUMEX H07Z1Nominal csa ofconductor (mm 2 )CoreconstructionBS EN60332-1-2BS EN60332-3-24BS EN50267-2-1BS EN50267-2-3(see note 4)BS EN60134-2LPCB Ref.No.1.5 One (3) Complies Complies 0.5% HCI Complies >60% 1151b/012.5 One (3) Complies Complies 0.5% HCI Complies >60%4.0 One (3) Complies Complies 0.5% HCI Complies >60%6.0 One (3) Complies Complies 0.5% HCI Complies >60%10 One (3) Complies Complies 0.5% HCI Complies >60%16 One (3) Complies Complies 0.5% HCI Complies >60%526 18 Jan 2014

PART 1: SECTION 8FIRE RESISTANT CABLESNominal csa ofconductor (mm 2 )CoreconstructionBS EN60332-1-2BS EN60332-3-24BS EN50267-2-1BS EN50267-2-3(see note 4)BS EN60134-225 One (3) Complies Complies 0.5% HCI Complies >60%35 One (3) Complies Complies 0.5% HCI Complies >60%50 One (3) Complies Complies 0.5% HCI Complies >60%70 One (3) Complies Complies 0.5% HCI Complies >60%95 One (3) Complies Complies 0.5% HCI Complies >60%120 One (3) Complies Complies 0.5% HCI Complies >60%150 One (3) Complies Complies 0.5% HCI Complies >60%185 One (3) Complies Complies 0.5% HCI Complies >60%240 One (3) Complies Complies 0.5% HCI Complies >60%10 One (2) Complies Complies 0.5% HCI Complies >60%16 One (2) Complies Complies 0.5% HCI Complies >60%25 One (2) Complies Complies 0.5% HCI Complies >60%35 One (2) Complies Complies 0.5% HCI Complies >60%50 One (2) Complies Complies 0.5% HCI Complies >60%70 One (2) Complies Complies 0.5% HCI Complies >60%95 One (2) Complies Complies 0.5% HCI Complies >60%120 One (2) Complies Complies 0.5% HCI Complies >60%150 One (2) Complies Complies 0.5% HCI Complies >60%185 One (2) Complies Complies 0.5% HCI Complies >60%240 One (2) Complies Complies 0.5% HCI Complies >60%1.5 One (1) Complies Complies 0.5% HCI Complies >60%2.5 One (1) Complies Complies 0.5% HCI Complies >60%4.0 One (1) Complies Complies 0.5% HCI Complies >60%6.0 One (1) Complies Complies 0.5% HCI Complies >60%10 One (1) Complies Complies 0.5% HCI Complies >60%LPCB Ref.No.Uo/U 450/750VNotes:1. Solid (Class 1) conductor.2. Stranded (Class 2) conductor.3. Flexible (Class 5) conductor.4. In achieving a weighted average of pH greater than 4.3 and a weighted average of conductivity less thant 10µS/mm on theconstituent materials when tested in accordance with BS EN 50267-2-3: 1999, the AFUMEX H07Z1 cables listed also met therequirements of BS EN 50267-2-2: 1999.Union Cable Company LtdUnit 15, Faraday Road, Astmoor Industrial Estate, Runcorn, Cheshire WA7 1QF, United KingdomTel: +44 (0)1928 577 418 • Fax: +44 (0)1928 581 099jim@unioncable.co.ukE-mail: sales@unioncable.co.uk • Website: www.unioncable.co.ukCertificate No: 682a-(cl-2) to BS 7629-1: 2008, BS EN 50200: 2006 Class PH120 BS EN50200: 2006 Annex E and BS 5839-1: 2013Clause 26.2dFiretrax GoldNominal csaof conductor(mm 2 )CoreConstruction(excluding drainwire & earth)BS 7629-1 BS EN 50200 BS EN 50200Annex EBS 5839-1Clause 26.2LPCB Ref. No.1.0 (1) 2, 3 & 4 Complies (3) Class PH120 30min (4) Standard (5) 682a/011.5 (1) 2, 3 & 4 Complies (3) Class PH120 30min (4) Standard (5)2.5 (1) 2, 3 & 4 Complies (3) Class PH120 30min (4) Standard (5)4.0 (2) 2, 3 & 4 Complies (3) Class PH120 30min (4) Standard (5)Uo/U 300/500VNotes:1) Solid conductor only.2) Stranded conductor only.3) In meeting the requirements of BS 7629-1: 2008, the Firetrax Gold cables listed met the requirements of smoke density of BS EN61034-2: 2005 fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the insulation,binder tape and outer covering when tested in accordance with BS EN 50267-2-1:1999.18 Jan 2014 527

PART 1: SECTION 8FIRE RESISTANT CABLES4) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impactphase and an additional 15min for the fire, impact and water phase.5) The Firetrax Gold cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006and met the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for astandard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2013.Certificate No: 682d-(cl-3) to BS 7629-1: 2008, BS EN 50200: 2006 Class PH120, BS 8434-2: 2003+A2:2009 120min and BS 5839-1:2013 Clause 26.2eFiretrax XcelNominal csa of conductor(mm²)Core construcion(excluding drain wire &earth)BS 7629-1BS EN502001.0 (1) 2, 3 & 4 Complies (3) ClassPH1201.5 (1) 2, 3 & 4 Complies (3) ClassPH1202.5 (1) 2, 3 & 4 Complies (3) ClassPH1204.0 (2) 2, 3 & 4 Complies (3) ClassPh120BS 8434-2BS 5839-1Clause26.2LPCB Ref.No.120min (4) Enhanced (5) 682d/01120min (4) Enhanced (5)120min (4) Enhanced (5)120min (4) Enhanced (5)Uo/U 300/500VNotes:1. Solid conductor only.2. Stranded conductor only.3. In meeting the requirements of BS 7629-1: 2008, the Firetrax Xcel cables listed met the requirements of smoke density of BS EN61034-2: 2005, fire resistance requirements CWZ in clause 11 of BS 6387: 1994 and achieved less than 0.5%HCI on the insulation,binder tape and outer covering when tested in accordance with BS EN 50267-2-1: 1999.4. The duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impactphase and an additional 60 min for the fire, impact and water phase.5. The Firetrax Xcel cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006and met the 120min duration when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met the requirements for anenhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2013.Ventcroft LimitedFaraday Road, Astmoor Industrial Estate, Runcorn, Cheshire WA7 1PE, United KingdomTel: +44 (0)1928 581098 • Fax: +44 (0)1928 581099E-mail: sales@ventcroft.co.uk • Website: www.ventcroft.co.ukCertificate No: 682a to BS 7629-1: 2008, BS EN 50200: 2006 Class PH120, BS EN 50200: 2006 Annex E and BS 5839-1: 2013Clause 26.2dNoBurn PlatinumNominal csaCoreof conductor Construction(mm 2 ) (excluding drainwire& earth)BS 7629-1BS EN50200BS EN 50200 AnnexEBS 5839-1Clause 26.2LPCB Ref.No.1.0 (1) 2, 3 & 4 Complies (3) Class PH120 30min (4) Standard (5) 682a/011.5 (1) 2, 3 & 4 Complies (3) Class PH120 30min (4) Standard (5)2.5 (1) 2, 3 & 4 Complies (3) Class PH120 30min (4) Standard (5)4.0 (2) 2, 3 & 4 Complies (3) Class PH120 30min (4) Standard (5)Uo/U 300/500VNotes:1) Solid conductor only.2) Stranded conductor only.3) In meeting the requirements of BS 7629-1: 2008, the NoBurn Platinum cables listed met the requirements of smoke density ofBS EN 61034-2: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on theinsulation, binder tape and outer covering when tested in accordance with BS EN 50267-2-1: 1999.528 18 Jan 2014

PART 1: SECTION 8FIRE RESISTANT CABLES4) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impactphase.5) The NoBurn Platinum cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200:2006 and met the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements fora standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2013.Certificate No: 682c to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005, BS EN 50200: 2006 Annex E and BS EN50200: 2006 Class PH120NoBurn XPNominal csaofconductor(mm 2 )Core construction(excluding drainwire)BS6387BS EN 50267-2-1BS EN61034-2BS EN50200Annex EBS EN502000.5 (1) 2, 3 & 4 C, W, Z 60% 30min (3) ClassPH1200.75 (1) 2, 3 & 4 C, W, Z 60% 30min (3) ClassPH1201.0 (1) 2, 3 & 4 C, W, Z 60% 30min (3) ClassPH1201.5 (1) 2, 3 & 4 C, W, Z 60% 30min (3) ClassPH1202.5 (1) 2, 3 & 4 C, W, Z 60% 30min (3) ClassPH1204.0 (2) 2, 3 & 4 C, W, Z 60% 30min (3) ClassPH120LPCB Ref.No.682c/01Uo/U 300/500VNotes:1) Solid conductor only.2) Stranded conductor only.3) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impactphase and an additional 15min for the fire, impact and water phase.Certificate No: 682d to BS 7629-1: 2008, BS EN 50200: 2006 Class PH120, BS 8434-2: 2003+A2:2009 120min and BS 5839-1: 2013Clause 26.2eNoBurn PlusNominal csaof conductor(mm 2 )Core construction(excluding drain wire& earth)BS 7629-1 BS EN 50200 BS 8434-2 BS 5839-1Clause 26.2LPCB Ref. No.1.0 (1) 2, 3 & 4 Complies (3) Class PH120 120min (4) Enhanced (5) 682d/011.5 (1) 2, 3 & 4 Complies (3) Class PH120 120min (4) Enhanced (5)2.5 (1) 2, 3 & 4 Complies (3) Class PH120 120min (4) Enhanced (5)4.0 (2) 2, 3 & 4 Complies (3) Class PH120 120min (4) Enhanced (5)Uo/U 300/500VNotes:1. Solid conductor only.2. Stranded conductor only.3. In meeting the requirements of BS 7629-1: 2008, the NoBurn Plus cables listed met the requirements of smoke density of BS EN61034-2: 2005, fire resistance requirements CWZ in clause 11 of BS 6387: 1994 and achieved less than 0.5%HCI on the insulation,binder tape and outer covering when tested in accordance with BS EN 50267-2-1: 1999.4. The duration of 120min when tested in accourdance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impactphase and an additional 60min for the fire, impact and water phase.5. The NoBurn Plus cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006and met the 120min duration when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met the requirements for anenhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2013.18 Jan 2014 529

PART 1: SECTION 8FIRE RESISTANT CABLESWrexham Mineral CablesWynnstay Technology Park, Ruabon, Wrexham, Clwyd LL14 6EN, United KingdomTel: +44 (0)1978 810789 • Fax: +44 (0)1978 821502E-mail: sales@wrexhammineralcable.com • Website: www.wrexhammineralcables.comCertificate No: 333a to BS EN 60702-1: 2002, BS 6387: 1994, BS 50267-2-1: 1999, BS EN 50200: 2006 Class PH120, BS 8434-2:2003+A2:2009 120min and BS 5839-1: 2013 Clause 26.2Wrexham Mineral Insulated CablesNominal csaof conductor(mm 2 )CoreConstructionBS EN 60702-1(See note 6)BS6387BS EN50267-2-1(outercovering)BS EN50200WMIC HeavyDuty1.5 (1,3) one, 2, 3 & 4 Complies C,W,Z

PART 1: SECTION 8FIRE RESISTANT CABLESNominal csaof conductor(mm 2 )CoreConstructionBS EN 60702-1(See note 6)BS6387BS EN50267-2-1(outercovering)BS EN502001.5T (1,2) 2, 3 & 4 Complies C,W,Z

PART 1: SECTION 9ALARM RECEIVING CENTRESThis section lists Alarm Receiving Centres approved to LPS 1020 Requirements for Alarm Receiving Centresand those certified to the requirements of BS 5979 Code of Practice for Remote Centres Receiving Signalsfrom Security Systems.The Fire Service’s 'Model Agreement' between the Fire and Rescue authorities and users of remotelymonitored fire alarm systems calls for third party certification of both the installer and the Alarm ReceivingCentre (ARC).The LPCB approval scheme based on the criteria of LPS 1020 when used in conjunction with BS 5979provides the means to achieve the alarm receiving centre requirement of the model agreement. Third partycertification of the installer can be achieved via the LPCB’s scheme for installers based, on the requirementsof LPS 1014 Requirements for certificated fire detection and alarm systems firms.For further details of the ‘Model Agreement’ contact:-The Chief Fire Officers’ Association9-11 Pebble CloseAmingtonTamworthStaffordshireB77 4RDTel: +44 (0) 1827 302 300Since the Alarm Receiving Centres must have links to the appropriate fire brigade mobilisation centres, the listincludes details of the fire authority areas for which they are approved.LPS 1020 is in the process of being revised. Please check www.RedBookLive.com for updates.Banham Alarms (Prop: Banham Patent Locks Limited)10 Pascal Street, London SW8 4SH, United KingdomTel: +44 (0)207 622 5151 • Fax: +44 (0)207 498 2461Website: www.banham.comCertificate No. CFSA006 to LPS 1020Alarm receiving equipment: Telecom Red CARE System.Approved Fire Authority areas of operation:Bedfordshire, Berkshire, Buckinghamshire, East Sussex, Essex, Hampshire, Hertfordshire, Kent, Greater London, Surrey West Sussex.EMCS - East Midlands Central Station LimitedWaterside House, Tissington Close, Chilwell, Nottingham NG9 6QG, United KingdomTel: +44 (0)844 80 999 80 • Fax: +44 (0)844 80 999 70E-mail: admin@emcs.co.uk • Website: www.emcs.co.ukCertificate No. CFSA 017 to LPS 1020 Issue 2.1Alarm receiving equipment: BT Redcare (Incorporating Classic,GSM,AGILE and ASSURE), CSL Dualcom, Emizon21, Webway OneDigital Communicators, (Point Id and SIA communication Protocols) CCTV - Adpro, DM and VDT.Approved fire authority areas of operation: Avon, Bedfordshire, Berkshire, Buckinghamshire, Cambridgeshire, Central Scotland, Cheshire,Cleveland, Cornwall, Cumbria, Derbyshire, Devon, Dorset, Dumfries & Galloway, Durham, Dyfed, East Sussex, Essex, Fife,Gloucestershire, Grampian, Guernsey, Hampshire, Hereford & Worcester, Hertfordshire, Highlands & Islands, Humberside, Isle Of Man,Isle Of Wight, Kent, Lancashire, Leicester, Lincolnshire, London, Lothian & Borders, Manchester, Merseyside, Mid/West Wales, Norfolk,North Wales, North Yorkshire, Northants, Northern Ireland, Northumberland, Oxfordshire, Powys, Shropshire, Somerset, South Wales,South Yorkshire, Staffordshire, Strathclyde, Suffolk, Surrey, West Sussex, Tayside, Tyne & Wear, Warwickshire, West Midlands, WestYorkshire, Wiltshire.532 18 Jan 2014

PART 1: SECTION 9ALARM RECEIVING CENTRESNational Monitoring (Prop. AVR Group Limited)Units 16/24, Attenburys Park Estate, Attenburys Lane, Timperley, Cheshire WA14 5QN, United KingdomTel: +44 (0)870 4009998 • Fax: +44 (0)870 4009988Certificate No. CFSA008 to LPS 1020Alarm receiving equipment: Telecom Red CARE System.Approved fire authority areas of operation:Avon, Bedfordshire, Berkshire, Cambridgeshire, Cheshire, Clwyd, Cumbria, Derbyshire, Devon, Dorset, Essex, Gloucestershire,Hampshire, Hereford & Worcester, Humberside, Lancashire, Leicestershire, Lincolnshire, London, Greater Manchester, Merseyside,Norfolk, Northamptonshire, Northern Ireland, Nottinghamshire, North Yorkshire, Shropshire, South Yorkshire, Staffordshire, Suffolk,Surrey, Tyne and Wear Warwickshire, West Glamorgan, West Midlands, West Yorkshire, Strathclyde.Southern Monitoring Services LimitedSecurity House, 212-218, London Road, Waterlooville, Hampshire PO7 7AJ, United KingdomTel: +44 (0)844 871 2223 • Fax: +44 (0)870 243 330Certificate No. CFSA003 to LPS 1020Alarm receiving equipment: Telecom Red CARE System.Approved fire authority areas of operation:Avon, Bedfordshire, Berkshire, Buckinghamshire, Cambridgeshire, Cheshire, Cleveland, Clwyd, Cornwall, Cumbria, Derbyshire, Devon,Dorset, East Sussex, Essex, Gloucestershire, Grampian, Greater London, Gwent, Hampshire, Hereford & Worcester, Hertfordshire,Humberside, Isle of Wight, Kent, Lancashire, Leicestershire, Lincolnshire, Lothian, Greater Manchester, Merseyside, Mid Glamorgan,Norfolk, Northamptonshire, North Yorkshire, Nottinghamshire, Oxfordshire, Powys, Shropshire, Somerset, South Glamorgan, SouthYorkshire, Staffordshire, Strathclyde, Suffolk, Surrey, Tyne & Wear, Warwickshire, West Glamorgan, West Midlands, West Sussex, WestYorkshire, Wiltshire.18 Jan 2014 533

PART 1: SECTION 10ALARM TRANSMISSION AND FAULT MONITORING EQUIPMENT AND SIGNALLING SYSTEMSThis section of the Red Book lists alarm transmission and fault warning routing equipment suitable for usewith fire alarm systems as defined by Figure 1 of EN 54-1: 1996 Fire detection and fire alarm systems Part 1.Alarm transmission equipment suitable for use with intruder alarm and hold-up systems is listed inVolume 2, Part 4, Section 1.2 of the Red Book.Where alarm transmission equipment may be suitable for use with both fire alarm systems and intruder alarmand hold-up systems the entry for the approved equipment will appear in Volume 1, Part 1, Section 10 andVolume 2, Part 4, Section 1.2 of the Red Book.Where appropriate, reference is made to published standards and the following standards are currently usedfor the approval schemes:EN 54-21: 2006 Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warningrouting equipmentLPS 1277 Requirements for LPCB Approval and listing of Alarm Transmission EquipmentEN 54-21: 2006 EN 54-21:2006 is an EU harmonised standard addressing the provisions of the ConstructionProducts RegulationANNEX ZA of EN 54-21 states that for CE marking purposes it is not necessary to test the alarm transmissionand fault warning routing equipment performance characteristics in conjunction with the transmissionnetworks to confirm the claimed transmission parameters D, M, T, A ,S and I. These parameters are howeverdescribed in the EN 54-21 normative ANNEX A and may be tested as an option. Unless otherwise stated,LPCB approval to EN 54-21 confirms that the routing equipment meets only those requirements of ANNEX ZArelating to the operational and environmental reliability of the item(s) located within the protected premises.Whereas LPS 1277 includes criteria for both fire and security systems that specifically requires the alarmtransmission and fault warning routing equipment to be tested in conjunction with the appropriate transmissionnetworks, particular emphasis is placed on the verification of manufacturers’ claims by measuring alarmtransmission times over the transmission path(s) between the equipment under test and the correspondingalarm receiving centre. The response to the reporting of fault conditions is measured in a similar way. Theresults of these measurements are expressed in terms of alarm transmission system (ATS) performancecriteria classification, using the parameters D, M, T and where applicable S and I.Where,D = Transmission time classificationM = Transmission time maximum valuesT = Fault reporting time classificationS = Substitution SecurityI = Information SecurityAvailability is considered a key parameter under LPCB approval and is therefore included within therequirements of LPS 1277 and the resultant performance is expressed using the parameter ‘A’ for Availability.To assist specifiers in their selection of the products most appropriate for protecting their risks, the LPCBenhanced performance ratings are included with the product listing entry in the Redbook as an indicator of thelevel of performance that can be expected from the alarm transmission system.Products approved to LPS 1277 Issue 3.0 encompass all of the requirements of EN 54-21 and productstested and approved by the LPCB will have met the compliance criteria of EN 54-21 in full. It is thereforerecommended that alarm transmission and fault warning routing equipment be approved to LPS 1277 wherepossible.Compliance with relevant safety standards and applicable mandatory directives is a pre-requisite of LPCBapproval and listing. Regular product auditing and regular factory inspections are carried out by LPCB toensure high manufacturing standards and continued compliance with the applicable product standard.534 18 Jan 2014

PART 1: SECTION 10ALARM TRANSMISSION AND FAULT MONITORING EQUIPMENT AND SIGNALLING SYSTEMSNotes:Since the LPCB uses national and international standards for the listing of products, in some instances therequirements of these standards may conflict with the recommendations of local codes of practice. Werecommend that specifiers seek advice from the relevant local authorities and amend their specificationsaccordingly.18 Jan 2014 535

PART 1: SECTION 10.1ALARM TRANSMISSION AND FAULT WARNING ROUTING EQUIPMENTAlarm transmission and fault warning routing equipment approved to the requirements of EN 54-21: 2006 Firedetection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment.Unless stated otherwise the performance of those components of the alarm transmission and fault warningrouting system normally located in the protected premises have been tested and assessed for compliancewithout connection to the associated alarm transmission networks as prescribed by ANNEX ZA of EN 54-21.Please check www.RedBookLive.com for updates.536 18 Jan 2014

PART 1: SECTION 10.2SUPERVISED PREMISES TRANSCEIVERS (FIRE) - LPS 1277 ISSUE 2.2Supervised premises transceivers are part of the alarm transmission and fault warning routing equipment.They are located at the protected premises and are connected between the transmission network and the firealarm control panel.The equipment listed in this section has been assessed against the requirements and test methods of LPS1277 Requirements for LPCB Approval and listing of Alarm Transmission Systems and Equipment Issue 2.2.CAUTION - LPS 1277 ISSUE 2.2 WAS SUPERSEDED IN APRIL 2011 BY LPS 1277 ISSUE 3.0. See Part 1Section 10.3.Please check www.RedBookLive.com for the current publication and for the latest product listings.CSL DualCom LimitedSalamander Quay West, Park Lane, Harefield, Middlesex UB8 6NZ, United KingdomTel: +44 (0)1895 474474 • Fax: +44 (0)1895 474440E-mail: sales@csldual.com • Website: www.csldual.comCertificate No: 723a to LPS 1277: Issue 2.2Supervised Premises Transceivers (Fire) - LPS 1277 Issue 2.2Certificated ProductsLPCB Ref.No.CS 1400 DualCom Fire A dual path, GPRS (Primary) and PSTN (Secondary) supervised premises transceiver. 723a/01For full details of the approval, you can view a pdf of the certificate by clicking on the product name in the entry onwww.RedBookLive.com.18 Jan 2014 537

PART 1: SECTION 10.3SUPERVISED PREMISES TRANSCEIVERS (FIRE) - LPS 1277 ISSUE 3Supervised premises transceivers are part of the alarm transmission and fault warning routing equipment.They are located at the protected premises and are connected between the transmission network and the firealarm control panel.Specifiers are advised to check the issue of LPS 1277 against which the supervised premises transceiver isapproved. The current publication of LPS 1277 is Issue 3.Chiron Security Communications LimitedWyvols Court, Swallowfield, Reading, Berkshire RG7 1WY, United KingdomTel: +44 (0)118 988 0228 • Fax: +44 (0)118 988 1055E-mail: sales@chironsc.com • Website: www.chironsc.comCertificate No: 1080a to LPS 1277 Issue 3.0Supervised premises transceivers (fire) - LPS 1277 Issue 3.0Certificated ProductsIris Touch 220 Alarmtransmission diallerIris Touch 240 Alarmtransmission diallerIris Touch 420 Alarmtransmission diallerIris Touch 440 Alarmtransmission diallerIris Touch 440R Alarmtransmission diallerIris Touch 440R Alarmtransmission diallerIris Touch 620 Alarmtransmission diallerIris Touch 640 Alarmtransmission diallerA single path, Ethernet supervised premises transceiver, capable of fulfilling:-The requirements of BS EN 54-21 for Fire Type 1 1 fire alarm transmission and faultwarning routing equipment.A dual path, Ethernet (primary) and GPRS (secondary) supervised premises transceiver,capable of fulfilling:-The requirements of BS EN 54-21 for Type 1 1 fire alarm transmission and fault warningrouting equipment.A single path, Ethernet supervised premises transceiver, capable of fulfilling:-The requirements of BS EN 54-21 for Type 1 1 fire alarm transmission and fault warningrouting equipment.A dual path, Ethernet (primary) and GPRS (secondary) supervised premises transceiver,capable of fulfilling:-The requirements of BS EN 54-21 for Type 1 1 fire alarm transmission and fault warningrouting equipment.A dual path, Ethernet (primary) and GPRS (secondary) supervised premises transceiver,capable of fulfilling:-The requirements of BS EN 54-21 for Type 1 1 fire alarm transmission and fault warningrouting equipment.A dual path, Ethernet (GPRS) and PSTN (secondary) supervised premises transceiver,capable of fulfilling:-The requirements of BS EN 54-21 for Type 2 1 fire alarm transmission and fault warningrouting equipment.A single path, Ethernet supervised premises transceiver, capable of fulfilling:-The requirements of BS EN 54-21 for Type 1 1 fire alarm transmission and fault warningrouting equipment.A dual path, Ethernet (primary) and GPRS (secondary) supervised premises transceiver,capable of fulfilling:-The requirements of BS EN 54-21 for Type 1 1 fire alarm transmission and fault warningrouting equipment.LPCB Ref.No.1080a/021080a/031080a/051080a/061080a/071080a/071080a/081080a/09Notes:1. To achieve fire category 'BS EN 54-21 Type 1' or 'BS EN 54-21 Type 2' for use with fire detection and alarm systems, the followingrequirements must be observed:The IRIS Touch configuration settings must be set as stated in Section 3.1, ‘Requirements for the monitoring centre’, of the ‘Touch DiallerInstallation Manual for EN 54-21 Compliant Fire Applications’ V1.0, to provide the performance parameters shown in the ConfirmedPerformance Parameters tables.The dialler must be fitted within the fire alarm control and indicating equipment (CIE) or other metal housing providing protection againstingress to IP30 at access level 2 and be connected to an integral power supply compliant with BS EN 54-4 (Chiron recommends the useof the Elmdene ‘ST’ range of power supplies if required).The dialler must be used in conjunction with fire alarm CIE which is capable of meeting 'options with requirements' associated withclauses 7.9, 8.2.4(g), 8.2.5(b), 8.9, 9.4.1(c), 9.4.2(b), 10.1(e), 11(a) and 11(b) of BS EN 54-2.Connection to the fire alarm CIE shall be by PIN inputs only with end-of-line resistors fitted.For full details of the approval, you can view a pdf of the certificate by clicking on the product name in the entry onwww.RedBookLive.com.538 18 Jan 2014

PART 1: SECTION 10.3SUPERVISED PREMISES TRANSCEIVERS (FIRE) - LPS 1277 ISSUE 3Chubb Fire and Security LimitedUnit B, 3A Edison Road, Hams Hall Distribution Park, Coleshill, Birmingham B46 1DA, United KingdomTel: +44 (0)800 321666 • Fax: +44 (0)1932 765630E-mail: sales@chubb.co.uk • Website: www.chubb.co.ukSales Enquiries:Chubb Fire & Security ltd, Chubb House, Staines Road West, Sunbury on Thames, Middlesex TW16 7AR,United KingdomTel: +44 (0)800 321666 • Fax: +44 (0)1932 765630E-mail: sales@chubb.co.uk • Website: www.chubb.co.ukCertificate No: 1078a to LPS 1277: Issue 3.0Supervised premises transceivers (fire) - LPS 1277 Issue 3.0Certificated Products20118530 Chubb eConnectIP/GPRS G4eFA dual path, Ethernet (primary) and GPRS (secondary) supervised premises transceivercapable of fulfilling:-The requirements of BS EN 54-21 for Type 1 1 fire alarm transmission and fault warningrouting equipment.LPCB Ref.No.1078aNotes:1. To achieve fire category 'BS EN 54-21 Type 1' for use with fire detection and alarm systems, the following requirements must beobserved:The 20118530 - Chubb eConnect IP/GPRS G4eF is to be used in accordance with the installation instructions and in conjunction with firealarm CIE which is capable of meeting 'options with requirements' associated with clauses 7.9, 8.2.4(g), 8.2.5(b), 8.9, 9.4.1(c), 9.4.2(b),10.1(e), 11(a) and 11(b) of BS EN 54-2.Fire alarm and fire fault or trouble signals from the alarm panel must be connected via PIN inputs. The PIN inputs shall be programmedas ‘End of Line’ (EOL).The 20118530 - Chubb eConnect IP/GPRS G4eF must be fitted within the fire alarm control and indicating equipment (CIE) or othermetal housing providing protection against ingress to IP30 at access level 2 and be connected to an integral power supply compliant withBS EN 54-4.The fault outputs must be connected to suitable inputs on an BS EN 54-2 compliant fire alarm CIE. The CIE inputs must be electricallycompatible with the eConnect IP/GPRS G4eF outputs as defined by the electrical specifications section of the Chubb eConnect IP/GPRSG4eF installation manual. If compatibility cannot be achieved a BS EN 54 compliant supplementary interface should be used.Where the use of additional interface equipment is required to connect with a particular fire alarm CIE, this must be compliant with theapplicable part(s) of BS EN 54.Fault conditions signalled by general purpose fault output 1, must be latched by the CIE fault input circuit.For full details of the approval, you can view a pdf of the certificate by clicking on the product name in the entry onwww.RedBookLive.com.UTC Fire & Security BV.Kelvinstraat 7, 6003 DH Weert, The NetherlandsTel: +31 495 583000 • Fax: +31 495 550042E-mail: reception.weert@fs.utc.com • Website: www.utcfssecurityproducts.nlCertificate No: 1062c to LPS 1277: Issue 3.0Supervised premises transceivers (fire) - LPS 1277 Issue 3.0Certificated ProductsTDA1420 Alarmtransmission diallerA single path 1 , Ethernet supervised premises transceiver, capable of fulfilling:-The requirements of BS EN 54-21 for Type 1 2 fire alarm transmission and fault warningrouting equipment.LPCB Ref.No.1062c/0218 Jan 2014 539

PART 1: SECTION 10.3SUPERVISED PREMISES TRANSCEIVERS (FIRE) - LPS 1277 ISSUE 3Certificated ProductsTDA1440 Alarmtransmission diallerA dual path, Ethernet (primary) and GPRS (secondary) supervised premises transceivercapable of fulfilling:-The requirements of BS EN 54-21 for Type 1 2 fire alarm transmission and fault warningrouting equipment.LPCB Ref.No.1062c/03Notes:1. If a single transmission path is to be used for fire applications, careful consideration should be given to the selection of a network forwhich an appropriate level of robustness and stability can be assured.2. To achieve fire category 'BS EN 54-21 Type 1’ for use with fire detection and alarm systems, the following requirements must beobserved:- The TDA dialler configuration settings must be set as stated in the ‘Dialler installation for BS EN 54-21 compliant fire applications’section of the TDA14xx Series Dialler Installation Manual, issue 1, in order to provide the performance parameters shown in theConfirmed Performance Parameters tables.- The dialler must be fitted within the fire alarm control and indicating equipment (CIE) or other metal housing providing protectionagainst ingress to IP30 at access level 2 and be connected to an integral power supply compliant with BS EN 54-4 (UTCrecommends the use of the UTC PM702C and PM705C power supplies if required).- The dialler must be used in conjunction with fire alarm CIE which is capable of meeting 'options with requirements' associated withclauses 7.9, 8.2.4(g), 8.2.5(b), 8.9, 9.4.1(c), 9.4.2(b), 10.1(e), 11(a) and 11(b) of BS EN 54-2.- Connection to the fire alarm CIE shall be by PIN inputs only with end-of-line resistors fitted.For full details of the approval, you can view a pdf of the certificate by clicking on the product name in the entry onwww.RedBookLive.comWebWayOne Ltd11 Kingfisher Court, Hambridge Road, Newbury, Berkshire RG14 5SJ, United KingdomTel: +44 (0)1635 231500 • Fax: +44 (0)1635 231539E-mail: sales@webwayone.co.uk • Website: www.webwayone.co.ukCertificate No: 1022a/01 to LPS 1277 Issue 3.0Supervised premises transceivers (fire) - LPS 1277 Issue 3.0Certificated Products22-5005 WebWayIP/GPRS LPS Fire Type 1plus configuration partnumber 1411AD155001A dual path, Ethernet (primary) and GPRS (secondary) supervised premises transceivercapable of fulfilling:-The requirements of BS EN 54-21 for Type 1 1 fire alarm transmission and fault warningrouting equipment.LPCB Ref.No.1022a/01Notes:1. To achieve fire category 'BS EN 54-21 Type 1' for use with fire detection and alarm systems, the following requirements must beobserved:The 22-5005 WebWay IP/GPRS LPS Fire Type 1 supervised premises transceiver is to be used in accordance with the installationinstructions and in conjunction with fire alarm CIE which is capable of meeting 'options with requirements' associated with clauses 7.9,8.2.4(g), 8.2.5(b), 8.9, 9.4.1(c), 9.4.2(b), 10.1(e), 11(a) and 11(b) of BS EN 54-2.Fire alarm and fire fault or trouble signals from the alarm panel must be connected via PIN inputs. The PIN inputs shall be programmedas ‘End of Line’ (EOL).The 22-5005 WebWay IP/GPRS LPS Fire Type 1 supervised premises transceiver must be fitted within the fire alarm control andindicating equipment (CIE) or other metal housing providing protection against ingress to IP30 at access level 2 and be connected to anintegral power supply compliant with BS EN 54-4.For full details of the approval, you can view a pdf of the certificate by clicking on the product name in the entry onwww.RedBookLive.com.Certificate No: 1022a/02 to LPS 1277: Issue 3.0Supervised premises transceivers (fire) - LPS 1277 Issue 3.0Certificated Products22-5015 WebWayGPRS/PSTN LPS FireType 2 plus configurationpart number1411AD155003A dual path, GPRS (primary) and PSTN (secondary) supervised premises transceivercapable of fulfilling:-The requirements of BS EN 54-21 for Type 2 1 fire alarm transmission and fault warningrouting equipment.LPCB Ref.No.1022a/02540 18 Jan 2014

PART 1: SECTION 10.3SUPERVISED PREMISES TRANSCEIVERS (FIRE) - LPS 1277 ISSUE 3Notes:1) To achieve fire category 'BS EN 54-21 Type 2' for use with fire detection and alarm systems, the following requirements must beobserved:The 22-5015 WebWay GPRS/PSTN LPS Fire Type 2 supervised premises transceiver is to be used in accordance with the installationinstructions and in conjunction with fire alarm CIE which is capable of meeting 'options with requirements' associated with clauses 7.9,8.2.4(g), 8.2.5(b), 8.9, 9.4.1(c), 9.4.2(b), 10.1(e), 11(a) and 11(b) of BS EN 54-2.Fire alarm and fire fault or trouble signals from the alarm panel must be connected via PIN inputs. The PIN inputs shall be programmedas ‘End of Line’ (EOL).The 22-5015 WebWay GPRS/PSTN LPS Fire Type 2 supervised premises transceiver must be fitted within the fire alarm control andindicating equipment (CIE) or other metal housing providing protection against ingress to IP30 at access level 2 and be connected to anintegral power supply compliant with BS EN 54-4.For full details of the approval, you can view a pdf of the certificate by clicking on the product name in the entry onwww.RedBookLive.com.18 Jan 2014 541