Stepping motor controller CPS 20 - esitron-electronic GmbH

AbstractThe CPS20.6xx (1 Axis) bzw. CPS20.7xx (2 Axes) is a free programmable positioning controller foruniversal applications with stepping motors. Applications focus on special and production machinery.Special programms for various application areas are available.The CPS20.6x/7x offers simple and comfortable handling and programming via keyboard and menudrivendecoded text displays. No cryptic abreviations are used, which give the user a hard time.The controller is combined with the control panel to a very compact unit and thus fasilitates trouble freeassembling in control consoles.The separated and modular desing of controller and power stage facilitates to combine arbitraty steppingmotors with 2-, 3- or 5 phases and varying power.Features:Operating mode selection menu drivenDecoded texts on illuminated displayAutomatic reference zero moveAutomatic/manual jog modeAll parameters free programmablePassword protected machine parametersAdaptation specific to the machine (e.g. Measuring unit)1 - 90 Programms180 Sets extendable to 800 (power fail safe)Acceleration and deceleration ramp programmableSpeed freely selectableError diagnosis system with decoded text messagesHigh immunity to interference through galvanic insulated in- and outputsShort-circuit proof transistor-outputsEasy to remove through plugable connectorsOptions:RS232C Data interfaceWallplugComplete unit, ready to use in 19" housingTechnical Data:Number of axes:Entry:1 or 2Membrane key withtactile acknowledgmentAcceleration and decelerantionramp:Max. seed:1 - 100 kHz/sec.30 kHzDisplay:Memory:Gear adaptation:Reference-run to zero:Impulse start:Startramp monitoring:Stop with residual move:Error diagnosis:LC-Display (Decoded)2 x 24 illuminatedcharacters180 Sets, extendable to800 sets7-digityesyesyesyesyesSignal-inputs:Signal-outputs:Clock-/Direction output.: 24V (unloaded); 20mAConnectors:Supply voltage:Ambient temperature:Dimensions (WxHxD):8 Inputs; 24V; 10mAextendable to 15 inputs6 Outputs; 24V; 1Aextendable to 10 outputsClamping connectors24 VDC; ca. 0,3A0 ... + 45°C213 x 129 x 68 mmSubject to changes.esitron-electronic GmbHErnst-Zimmermann-Str. 18D-88045 FriedrichshafenInternet: www.esitron.deTel. +49(0)7541-6000-0Fax +49(0)7541-6000-11E-Mail: info@esitron.de