Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Lighting</strong>55For the Dealer Nearest You, Call: 800-729-3332
Headlight & Spotlamp Housing Kits<strong>Lighting</strong>5U.S. Design Patent#D423,126Doss <strong>Custom</strong> Teardrop HeadlightHousing KitsHearken back to the days of yore at the beginningof the Hot Rod phenomenon. At drive-insand on dark two-lane blacktop roads all overAmerica, Rodders would meet to settle the scoreon who was fastest, which car was the best lookingand which one the girls liked the best. Lots ofthose early Hot Rods were pre-war (WWII that is)Fords with rowdy V-8s and distinctive Teardropfront headlights. Jump forward to modern twowheelHot Rods and you can easily imagine theinspiration for the latest masterpiece <strong>by</strong> Rick Doss.It combines the popularity of 1950’s-vintage aluminumheadlight housings and the teardropshape of the early Ford headlight into one dynamite,bolt-on kit. Special asymmetrical reflector complete with halogen bulb was designed to put lighton the road just where you want it. Complete with all necessary components, brackets and hardwarebeautifully chrome-plated and ready to add a distinctive Hot Rod look.46534 For FL Softail ® models from 1986 to present and custom bikes with late FLST front ends .$338.7946336 For 4-speed FL models 1960 thru 1984 and custom bikes using early FL front ends . . . . . . .$314.5946334 Retro-fit kit for FL Softail ® models already equipped with the originalDoss Headlight Conversion kit (CC #26890) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$261.29Doss V-Style Spotlamp BracketsTired of the ‘sagging hammock’ look offactory spotlamp brackets? Here’s a V-stylishalternative!46654 Fits with Doss teardrop headlighthousing kit (CC #46534) . . . . . . . . . .$81.19Replacement Parts46368 Teardrop headlamp assembly(uses H4 bulb, not included) . . . . . .$59.9992208 Nacelle trim strip . . . . . . . . . . . . . . . . .$45.9992163 Chrome outer trim ring . . . . . . . . . . .$39.99Doss <strong>Custom</strong> Teardrop Headlightand Spotlamp KitsThese complete assemblies are the easy way toadd a whole new look to any stocker or custom.They are complete with a full teardrop headlighthousing conversion with all the hardware, a pairof matching teardrop spotlamps with built-inL.E.D. marker lights and a cool V-style spotlampmounting bracket. The marker lights can bewired to flash with your turn signals and as a runninglight. These Rick Doss designed kits are theeasy and affordable way to make your scoot stickout in a crowd.620996 Fits FL Softail ® models from 1986to present and custom builds usingFLST front ends . . . . . . . . . . . . . . . .$605.99620995 Fits 4-speed FL models from 1960thru 1984 and any custom usingearly style FL front ends . . . . . . . .$614.9962412 Replacement amber LED turn signallamp assembly (sold each) . . . . . . .$14.995.02Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Doss Headlight Conversion Kits for FL Softail ® Models• These are the original kits – still the best and most popular with builders.Other kits on the market are but poor imitations of <strong>Custom</strong> Chrome’sattention to detail, excellent fit and craftsmanship• Each piece is hand-polished and chrome-plated in the USAfor unmatched qualityIncludes the two-piece aluminum head lamp housing, all mounting brackets,headlight bucket, hardware, chrome slider covers, covers for the lower tripletree and handlebar risers. Bolts directly to the existing Original Equipmenttriple trees.Kit For FL Softail ® ModelsFor all Heritage Softail ® and Fat Boy ® models from 1986 to present (exceptFLSTS models). Optional Spotlamp Mounting Bar kit replaces the OEM spotlampbar on Heritage Softail ® Classic models to mount existing spotlampsand turn signals to the headlight conversion kit.26890 Headlight housing conversion kit . . . . . . . . . . . . . . . . . . . . . . . . . . . .$519.9926899 Optional spotlamp mounting bar kit (includes mounting bar,spacers, spotlamp/turn signal clamps and chrome hardware) . .$65.89Replacement Parts26892 Mounting brackets (sold each) . . . . . . . . . . . . . . . . . . . . .$7.6926893 FL headlight mount (black) . . . . . . . . . . . . . . . . . . . . . . .$59.9926894 FL headlight bucket (black) . . . . . . . . . . . . . . . . . . . . . . .$30.4926895 Chrome riser cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.9926896 Chrome lower triple tree under cover . . . . . . . . . . . . .$39.9926897 Chrome right slider cover . . . . . . . . . . . . . . . . . . . . . . . . .$39.9926898 Chrome left slider cover . . . . . . . . . . . . . . . . . . . . . . . . . .$39.9926536 Chrome FL head lamp housing . . . . . . . . . . . . . . . . . . .$289.9926526 Sealed beam retaining ring . . . . . . . . . . . . . . . . . . . . . . .$25.8426535 Chrome outer trim ring and seal . . . . . . . . . . . . . . . . . .$22.7912555 Spotlamp mounting bar ONLY . . . . . . . . . . . . . . . . . . . .$65.59Note: Early style windshields and brackets should be used with aluminumheadlight kits.Headlight Housings26890ApparelBike Kits& TrailersSeats& BagsFootControlsHandControls<strong>Lighting</strong>ElectricalExhaustIntakeEngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesDoss <strong>Custom</strong> 7" HeadlightsInnovative design <strong>by</strong> Rick Doss has interesting raised rib detail on the sides ofthe housing to match up with those on the Original Equipment fork tins.Includes mounting block and hardware for a bolt-on fit to FL Softail ® modelsfrom late 1986 to present. Also available in a smooth version to replace thestock unit.30120 Ribbed 7" headlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$124.9930121 Smooth 7" headlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$124.99Forks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.03CrossReference
Headlights<strong>Lighting</strong>464735Doss <strong>Custom</strong> Dual Headlight KitsThe easiest way to bolt-on an eye catching customlook in minutes. 41/2" headlights attach to aribbed billet aluminum mounting block withaccents. Kits are available with ribbed or smooth41/2" dual beam headlights. For 1980 to presentFXST, FXWG and FXDWG models. Includes brackets,mounting blocks and hardware.46473 Kit with smooth headlights . . . . . . .$216.9946474 Kit with ribbed headlights . . . . . . . .$244.99Replacement Parts (sold each)46475 Headlight mounts . . . . . . . . . . . . . . . . . .$9.7962018 Headlight bracket . . . . . . . . . . . . . . . .$107.9926400 41/2" sealed beam . . . . . . . . . . . . . . . . .$13.9946474Ness-Tech ® Billet HeadlightsLooks sleek and mean. CNC-machined from6061-T6 billet aluminum. Features an innovativeheadlamp retaining system that means noexposed mounting hardware to spoil the look.Designed for 53/4" headlight applications. Willwork in most bottom mount applications.05327 Smooth . . . . . . . . . . . . . . . . . . . . . . . .$299.9505328 Grooved . . . . . . . . . . . . . . . . . . . . . . .$309.95Note: Headlight sealed beams not includedNess-Tech ® Billet HeadlightsLean, mean looks are just part of the beauty ofthis Arlen Ness ® design. Top-quality CNC-machinedbillet also provides unique engineering thatincludes a threaded headlight retaining ring toeliminate exposed mounting hardware. Halogenlamp not included.05966 53/4" smooth . . . . . . . . . . . . . . . . . . . . .$359.9005967 53/4" grooved . . . . . . . . . . . . . . . . . . . . .$370.0005968 7" smooth . . . . . . . . . . . . . . . . . . . . . . . .$399.9505969 7" grooved . . . . . . . . . . . . . . . . . . . . . . .$399.95Extended Mounting Block05769 For most Original Equipmentbottom mount triple trees . . . . . . . . .$29.955.04Prices appearing in this catalog are Suggested Retail Price and are subject to change*
HeadlightsApparel310013100808503Bike Kits& TrailersSeats& Bags3100431005FootControlsHandControls310153101431016<strong>Lighting</strong>31054 31055Chrome Billet Headlights<strong>by</strong> Headwinds Show-quality ‘Classic’ headlights are precision-machinedwith recessed or visoredretaining rings. Housing designs are‘Grooved’ with scalloped lines all the wayaround the top half of the shell, and‘Smooth.’ Each unit includes an integrated3/4" bottom mount.‘Classic’ Headlights31050SmoothGrooved31001 53/4" with recessed ring . . . .$343.34 31002 53/4" with recessed ring . . .$363.9931007 7" with recessed ring . . . . . .$408.84 31008 7" with recessed ring . . . . . .$457.7931004 53/4" with visored ring . . . . .$405.79 31005 53/4" with visored ring . . . . .$447.3431010 7" with visored ring . . . . . . .$471.34 31011 7" with visored ring . . . . . . .$520.24‘Rocket’ HeadlightsThe ‘Rocket’ design is similar to the ‘Classic’ smooth, but features a deeper bucket.31054 53/4" Bradley Rocket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$372.4431055 53/4" Mariah Rocket with visor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$436.99‘Tradewinds ’ HeadlightsChrome-plated aluminum headlights that are manufactured offshore to be a lower costalternative to the regular Headwinds offerings. They’re precision-machined with recessedor visored retaining rings. Smooth or grooved styles with integrated 3/4" bottom mount.SmoothGrooved31050 53/4" with recessed ring . . . .$214.99 31051 53/4" with recessed ring . . .$233.6931052 53/4" with visored ring . . . . .$222.99Chrome Billet Headlight Mounting Blocks31013 For custom applications. 3/4" mount with 1" vertical offset . . . . . . . . . . . . . . . .$45.2431014 For stock-style Wide Glide ® triple trees (FXWG, FXST, FXDWG) . . . . . . . . . . . . . .$29.5931016 For Springer Softail ® models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$57.4931015 For all FL Softail ® models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32.64Note: Mounting block CC #31015 is required to mount CC #’s 31007 thru 31011 headlights on FL Softail® models.<strong>Custom</strong> Bottom Mount HeadlightAssemblies and Headlight Trim RingsOur 53/4" bottom-mount headlight assemblies feature aninnovative trim ring design with a halogen sealed beam or aprecision-ground, flat lens halogen lamp with a replaceable55/60 watt bulb. The trim ring is also available separately.Complete Assemblies with Smooth Rims08503 With flat lens halogen lamp . . . . . . . . . . . . . . . . . . .$90.9908505 With halogen sealed beam . . . . . . . . . . . . . . . . . . . .$52.99<strong>Custom</strong> Headlight Rim ONLYFor most bottom or side-mount 53/4" housings.08501 Smooth rim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99Dual Halogen Headlight KitsChrome 4" headlight kits include lights, bracket, mountingblocks and all necessary hardware. They feature replaceableH4 60/55 watt halogen bulbs and low-wattage daylightrunning lamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$139.9927913 Fits Dyna Wide Glide ® models from 1993 to presentand FX Softail ® models from 2000 to present (exceptDeuce models)27914 Fits FX Softail ® and 4-speed FXWG models from 1980to presentElectricalExhaustIntakeEngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.05CrossReference
Headlights<strong>Lighting</strong>5661000661001Xenon H.I.D. 7" HeadlightHigh intensity discharge lighting provides unmatched lightingperformance, greatly extended life and resistance to shockand vibration!• Features separate bulbs for hi beam and low beam usage,12V nominal input voltage and service life of approximately3500 hours• Special reflector optics utilize a Xenon bulb to producefour times the light output and ten times the life of conventionalheadlight!• Xenon bulb contains no filament which eliminates thebreakage from shock and vibration• Produces daylight color impression, so items are morevisible and easier to recognize• Includes waterproof headlight control module to adapt theheadlight to your current lighting system. Module can bewired to have Xenon light ignite after bike has been startedor when ignition switch is turned onFits in Most 7" Round Headlamp Housings(slight modification of headlamp housingmay be required on some models)661000 H.I.D. headlight kit . . . . . . . . . . . . . . . . . . . . . . . . . . .$499.99661001 Mounting ring kit for nacelles . . . . . . . . . . . . . . . . .$99.99661002 Replacement H.I.D. bulb . . . . . . . . . . . . . . . . . . . . . .$214.99661003 Replacement H8 high beam bulb . . . . . . . . . . . . . . .$21.99Chrome Headlight AssembliesChrome duplicates of the Original Equipment 12-volt headlights.12499 For Sportster ® , FX and FXR models 1975 thru 1989(repl. OEM 67705-74) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$41.9912500 For Sportster ® models from 1963 thru 1974, and FXmodels from 1971 thru 1974 (repl. OEM 67733-72) $41.99<strong>Custom</strong> TeardropHeadlightAdds a Hot Rod look to any bike.Includes teardrop shaped chromehousing complete with H4 halogenlight and chrome billet mount.Works in most bottom mountapplications. . . . . . . . . . . . . . . .$239.9903201 DOT approved headlightChrome Billet ‘Trim Rim’Headlamp AssemblyLean, clean styling in a chromeplated53/4" headlight assemblymachined from billet aluminumwith an extra-thin rim design.Includes the mounting block andsealed beam.07340 Headlight . . . . . . . . .$161.99640088 Replacement lamp .$35.70<strong>Custom</strong> Chrome ® 7"Headlight AssembliesFaithful stock reproductions fitted with 12-voltquartz halogen or standard sealed beams.Includes a chrome mounting bracket. Easilyadapted to many universal applications or latemodel triple trees for a distinctive classic look.26477 Complete assembly with quartzhalogen 12-volt sealed beam . . . .$75.9926473 Complete assembly with standard12-volt sealed beam . . . . . . . . . . . . .$60.997" Headlight ComponentsThe precision of our 7" headlight reproductionallows use of component parts for restoration.26466 7" headlight housing . . . . . . . . . . . .$48.2926463 7" headlight inner ring . . . . . . . . . .$11.6926464 7" headlight outer ring . . . . . . . . . .$22.1426491 Headlight bracket . . . . . . . . . . . . . . .$15.4993146 Retaining clip for rubber seal(pack of four) . . . . . . . . . . . . . . . . . . . .$4.9926420 Quartz halogen sealed beam(12-volt) . . . . . . . . . . . . . . . . . . . . . . . . .$16.9915089 Standard 6-volt sealed beam . . . . .$10.9915090 Standard 12-volt sealed beam . . . . .$8.19Chrome Headlight Housingfor European CountriesPermits the use of <strong>Custom</strong> Chrome ® headlightassemblies with ECE approved inserts inEuropean countries. Each shell comes withmounting bracket, outer and inner ring, andbulb socket. Sold each without inserts.85004 7" headlight housing ONLY . . . . . .$43.99Headlight Inserts with TÜV Approvalfor European CountriesECE-approved inserts for all headlights and spotlampsfor use in European countries. Availablefor right hand traffic also. Units do not includethe bulb. Sold each.85795 12-volt, H4 unit . . . . . . . . . . . . . . . . .$33.4985017 12-volt, H4 unit, right hand trafficonly, <strong>by</strong> Bosch ® . . . . . . . . . . . . . . . . .$129.39Bulb Retainer Spring85575 Fits H4 inserts for 7" headlightassemblies . . . . . . . . . . . . . . . . . . . . . . .$6.29Replacement Parts12501 Chrome rim set (repl. OEMs 67725-63, 67744-75)sold in pairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.7912502 Rubber seal only (repl. OEM 67719-63) . . . . . . . . . . . . .$5.795.06Prices appearing in this catalog are Suggested Retail Price and are subject to change*
HeadlightsApparelBike Kits& TrailersSeats& Bags46349FootControlsHandControls4630646305<strong>Lighting</strong>Doss HeadlightsGreat choices in custom headlights with distinctive bottom mount housings with 41/2" or 53/4" sealed beams. The41/2" in the small shell and 53/4" in the large shell have innovative ‘Frenched’ trim rings for a super custom look.46305 Small ribbed shell, 41/2" headlamp ‘Frenched’ trim ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.9946349 Small ribbed shell, 53/4" headlamp standard trim ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$105.9946306 Large smooth shell, 53/4" headlamp ‘Frenched’ trim ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$129.9926400 Replacement 41/2" sealed beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.99ElectricalExhaust<strong>Custom</strong> Chrome ® Headlight Assemblies53/4" HeadlightsShow-chrome custom 53/4" headlights are available with sideor bottom mounts. They all have high-beam indicator lights,and include mounting hardware.12504 12-volt bottom mount . . . . . . . . . . . . . . . . . . . . . . . . .$34.9412497 12-volt bottom mount with halogen . . . . . . . . . . .$42.4912506 12-volt side mount . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.94Replacement Parts12960 Outer chrome ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.9912509 Outer ring nut (pack of 10) . . . . . . . . . . . . . . . . . . . . .$6.4919643 Bottom mount hardware . . . . . . . . . . . . . . . . . . . . . . .$5.9912520 High-beam bulb (#53) pack of 10 . . . . . . . . . . . . . . .$6.49<strong>Custom</strong> Chrome ® 41/2" Mini LightsDesigned for extra lighting on safety bars. Rated at 30 wattswith 10,000 candlepower. 12-volt with high-low beam andindicator light. Includes swivel stud mounting bracket.26399 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.4926400 Replacement 12-volt sealed beam . . . . . . . . . . . . . .$13.99<strong>Custom</strong> Chrome ® Headlight and Spotlamp Housingsfor European CountriesChrome-plated headlight and 41/2" spotlamp housings that permit the useof <strong>Custom</strong> Chrome ® headlight assemblies with ECE approved inserts inEuropean countries. To properly install the 41/2" spotlamp inserts, you mustalso purchase one of the O-ring sets listed separately. Each housing comeswith mounting block, outer and inner ring, bulb socket and blue high-beamindicator light. Without inserts. Sold each.Housings ONLY85033 41/2" headlight housing, bottom mount . . . . . . . . . . . . . . . . . . . . . .$#N/A85036 53/4" headlight housing, bottom mount . . . . . . . . . . . . . . . . . . . . . .$23.6985037 53/4" headlight housing, side mount . . . . . . . . . . . . . . . . . . . . . . . . .$31.9985034 41/2" late-style spotlamp housing . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.49125062639912504Parts for Headlight Housings12960 Chrome outer ring only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.9912509 Chrome ring nut only (pack of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.4919643 Bottom mounting hardware only . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99Parts for Spotlamp Housings12481 Spotlamp rim only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.9985022 O-ring set for aftermarket late-style spotlampsTÜV approved) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.4985021 O-ring set for Original Equipment spotlamps(TÜV approved) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.49IntakeEngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.07CrossReference
<strong>Lighting</strong>5HeadlightsSpringer Headlight for Early ModelsExacting 61/2"-diameters replicas of the stock headlamps usedfrom 1936 thru 1954. Perfect fit of the complete unit, or useany of the replacement parts for restoration. Chrome orblack-painted finishes with chrome bezels.Chrome Headlight Assemblies12537 12-volt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66.1912538 6-volt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66.19Black Headlight Assemblies12539 12-volt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66.1912540 6-volt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66.19Replacement Parts12541 Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.7912542 Headlight trim ring with screw . . . . . . . . . . . . . . . . .$14.7412545 Headlight lamp reflector . . . . . . . . . . . . . . . . . . . . . .$12.4912543 12-volt replacement bulb . . . . . . . . . . . . . . . . . . . . . . .$6.4912544 6-volt replacement bulb . . . . . . . . . . . . . . . . . . . . . . . .$6.49Note: Will not fit Springer Softail® models from late 1988 thru 2003.Use CC #09754 instead.Halogen 61/2"Springer-StyleHeadlightA modern rendition of the headlighton Springer front endsfrom 1936 thru 1954. Highpower12-volt, 55/100 watt halogenbulb, and heavy-duty mountwith adjustable mounting blockand hardware. Fits all FXWG andSoftail ® models (includingSpringer Softail ® models) from1980 to present, and any customapplication where a Bates 53/4"headlight would be used. $103.9909754 Headlight assemblyReplacement Parts12541 Headlight lens . . . .$14.7912542 Headlight trimring with screw . . .$14.7412529 55/100 watt bulb . .$12.9912527 55/60 watt bulb . . . .$8.64‘Spearpoint’ Chrome Headlight Housing KitFeatures a ‘Spearpoint’ trim strip that covers the seam on topof the housings, and includes new die cast aluminum,chrome-plated housings to replace the polished OriginalEquipment parts, as well as a new chrome riser cover. Fits 4-speed FL models from 1960 thru 1984. . . . . . . . . . . . . . . . .$299.9926747 Complete kitTeardrop Headlight for Big TwinsChrome teardrop headlight features a smooth contoured retaining ring and a uniquedomed shape that enhances the front fork area. Available with standard or high outputhalogen sealed beams. Choose from a stock replacement for FXSTS models from 1993 topresent or custom version with Bates style tabs and mounting block for use on FXWG,FXDWG and Softail ® models from 1980 to present.53/4" for FX Springer Softail ® Models from 1993 to Present330130 Chrome shell assembly (complete less bulb) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$64.49330132 Headlight assembly with standard sealed beam . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.99330133 Headlight assembly with halogen sealed beam . . . . . . . . . . . . . . . . . . . . . . . . . . . .$97.5453/4" for FXDWG, FXST and FXWG Models from 1980 to Presentand FX Springer Softail ® Models from 1988 thru 1992330134 Headlight assembly with standard sealed beam . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.99330135 Headlight assembly with halogen sealed beam . . . . . . . . . . . . . . . . . . . . . . . . . . . .$82.99330131 Chrome shell assembly (complete less bulb) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$61.995.08Prices appearing in this catalog are Suggested Retail Price and are subject to change*
HeadlightsApparelBike Kits& TrailersSeats& BagsFootControlsHandControlsChrome Billet Headlight Kitwith Tri-Bar Lens CoverSlightly larger than comparable Tradewinds headlight, thischrome over billet aluminum beauty has unique features thatset it apart from the crowd. The headlight shell has a Tri-Barlens cover that allows the billet look to flow continuous fromfront to rear. The lens cover comes with a smooth bezel; anoptional lens cover with a knurled bezel is available for amore aggressive look. This headlamp also comes to a sharppoint at the rear of the housing, which gives it a morestreamlined appearance. Comes complete with 60/55 wattH-4 Halogen bulb. Accepts 3/4" mounting post. . . . . . .$328.49330300 53/4" headlight assembly with smooth bezelKodlin ‘Elypse’ Hi-Beam Billet HeadlightA show-chromed hi-beam billet headlight assembly from one of Europe’s premiercustomizers that breaks new ground in hi-tech styling.86501 Fits all Wide Glide ® front ends from 1980 to present . . . . . . . . . . . . . . . . . . . . . .$779.09640089 Replacement lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$60.50<strong>Lighting</strong>ElectricalExhaustIntakeEngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesChrome 4" Halogen Lightwith Running LampTrick, small-diameter light can be used as a headlight or asan auxiliary light. Great for custom bike builds, especially fordual light conversions. Features a replaceable H4 60/55 watthalogen bulb and low wattage daylight running lamp.Includes chrome hardware for bottom mountapplications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.6927912 Sold each‘Snake’ <strong>Custom</strong> Headlight UnitUniversal gel-coated GFK headlight unit for the ultimate performance look. Approvedand marked with an ‘E1’-mark. Includes 12V, H4 35/35W bulbs, inserts and all mountinghardware. Ready to sand and paint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$432.4985439 ‘Snake’ headlight unit assemblyFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.09CrossReference
<strong>Lighting</strong>5Adjure Headlights634006with61233Chrome Headlight Housings <strong>by</strong> AdjureFinish off your ride with these affordable chrome headlight housings.We have 53/4" and 7" diameter housings in smooth andflamed styles to appeal to any taste, and a wide variety of customlamp assemblies for a clean, cool look (see page 5.12 for photosof lens styles). The lamp assemblies include a standard 55/60 wattH4 halogen bulb.634006 Smooth 53/4" housing ONLY . . . . . . . . . . . . . . . . . . . . . .$279.99634007 Flamed 53/4" housing ONLY . . . . . . . . . . . . . . . . . . . . . .$302.49634008 Smooth 7" housing ONLY . . . . . . . . . . . . . . . . . . . . . . . .$250.00634009 Flamed 7" housing ONLY . . . . . . . . . . . . . . . . . . . . . . . .$290.0053/4" Lamp Assemblies ONLY61233 Ice-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.9561235 Trillient style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$77.95634060 Black Dot Tri-Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$77.95634059 Skull-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$77.957" Lamp Assemblies ONLY15719 Ice-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.5415721 Trillient style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.95634062 Black Dot Tri-Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.95634061 Skull-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.95634007with61233Mini Headlight Assemblies <strong>by</strong> AdjureThese 41/2"-diameter headlight assemblies are DOT-approvedand feature H4 halogen bulbs mounted in our popular ‘BlackDot Tri-Bar’ lamp assemblies for the ultimate in cool.634002 Complete headlight assemblywith smooth housing . . . . . . . . . . . . . . . . . . . . . . . .$240.00634003 Complete headlight assemblywith flamed housing . . . . . . . . . . . . . . . . . . . . . . . .$270.00634058 Replacement lamp assemblywith H4 halogen bulb . . . . . . . . . . . . . . . . . . . . . . . .$69.955.10Prices appearing in this catalog are Suggested Retail Price and are subject to change*
HeadlightsApparelBike Kits& TrailersSeats& BagsFootControls30123HandControls<strong>Lighting</strong>ElectricalExhaust30124CCE Aluminum Headlight with TÜVBottom mount aluminum headlight <strong>by</strong> <strong>Custom</strong> Chrome ® with H3 dual filament bulb. Available in blackor polished aluminum. Sold each.686370 Black686369 PolishedIntakeEngineGaskets1272185857<strong>Custom</strong> Scalloped HeadlightsCreative designs have built-in visors in theheadlight rim and decorative scallops in thechrome-plated stamped steel bodies. Bottommount brackets are included for most FXWG,FX Softail ® (except FXSTS), and Dyna Wide Glide ®models from 1980 to present as well as manycustom applications. The 61/2" and 53/4" lightsinclude 55/60 watt H-4 halogen bulbs. Alsoavailable in a 41/2" mini-headlight for use indual headlight applications. Sold each.30123 53/4" headlight . . . . . . . . . . . . . . . . .$114.1930124 61/2" ‘Springer’ headlight . . . . . . .$134.9912721 41/2" mini-headlight with 12-volthi-lo sealed beam for use inNorth American countries . . . . . . .$68.4985857 41/2" mini-headlight with 12-volt35/35W Bilux insert for use inEuropean countries(TÜV approved) . . . . . . . . . . . . . . . .$115.99Replacement Parts26400 Replacement 41/2" 30/30Wsealed beam for CC #12721 . . . . . .$13.9985019 Replacement 41/2" 35/35W Bilux insertfor CC #85857 (TÜV approved) . . . .$70.39F. Kodlin ‘Mini Square’ Headlight with TÜVAfter the success of his popular ‘Elypse’ headlight, Fred Kodlin made this new TÜV approved ‘MiniSquare’ version. It comes with two bulbs and the front lens has a blue tint, while the housing ishand-polished and show chromed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$690.39686320 Sold eachTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.11CrossReference
Headlamps & Bulbs<strong>Lighting</strong>5Sealed BeamsFit all <strong>Custom</strong> Chrome ® or Original Equipmentheadlight housings. Sold each.12508 53/4" 12-volt . . . . . . . . . . . . . . . . . . . . .$13.9926425 53/4" 12-volt halogen . . . . . . . . . . . .$23.9412507 53/4" 6-volt . . . . . . . . . . . . . . . . . . . . . .$18.4915089 7" 6-volt . . . . . . . . . . . . . . . . . . . . . . . .$10.9915090 7" 12-volt . . . . . . . . . . . . . . . . . . . . . . . .$8.1926420 7" 12-volt halogen . . . . . . . . . . . . . . .$16.99Halogen Headlamps and BulbsDual-filament halogen 55/60 watt H-4 bulb with aprecision-ground lens. 12-volt.12525 7" (repl. OEM 67755-81T) . . . . . . . . . . . . . . . . . . . . . .$33.2512526 53/4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$38.9912527 55/60W H-4 halogen bulb only(repl. OEM 67697-81T) . . . . . . . . . . . . . . . . . . . . . . . . . .$8.6412529 55/100W H-4 halogen bulb only . . . . . . . . . . . . . . .$12.9915073H3 Halogen BulbsImprove the look and the light ofyour auxiliary lighting with these55 watt H3 bulbs. . . . . . . .$0.89 ea.15073 Gold tint 55 watt H3halogen bulb (box of 10)15071 Blue tint 55 watt H3halogen bulb (box of 10)IceTrillientHigh Intensity H4 BulbsAn easy way to improve your nighttime visibility with a simple plug-inupgrade. Sold each.Headlight and Spotlamp Insertsfor European CountriesECE-approved inserts for all headlights and spotlampsfor use in European countries. Availablefor right hand traffic also. Units do not includethe bulb. Sold each.For 41/2" Spotlamps and Headlights85019 12V, 35/35W Bilux unit . . . . . . . . . . .$70.3985018 12V, H3 Fog Light unit . . . . . . . . . . .$53.0985020 12V, H3 High Beam unit . . . . . . . . .$54.6985022 O-ring set for aftermarketlate-style spotlamps . . . . . . . . . . . . . .$5.4985021 O-ring set for Original Equipmentspotlamps . . . . . . . . . . . . . . . . . . . . . . .$10.49For 53/4" Headlights84838 12V, H4 unit . . . . . . . . . . . . . . . . . . . . .$29.9985016 12,V H4 unit, right hand traffic only,<strong>by</strong> Bosch ® . . . . . . . . . . . . . . . . . . . . . . .$75.09For 7" Headlights85795 12V, H4 unit . . . . . . . . . . . . . . . . . . . . .$33.4985017 12V, H4 unit, right hand traffic only,<strong>by</strong> Bosch ® . . . . . . . . . . . . . . . . . . . . . .$129.39Bulb Retainer Spring85575 Fits 53/4" and 7" H4 inserts . . . . . . . .$6.29SkullBlack Dot Tri-Bar‘Jeweled’ Lamp Assemblies <strong>by</strong> AdjureGreat looks and safer lighting make these DOT approvedlamps a logical upgrade. The 55/60 watt H4 bulb with the‘diamond cut’ or ‘wave cut’ reflectors deliver powerful illumination.The ‘Ice-style’ has a smooth, clear lens, and is alsoavailable in a ‘Skull’ version. The Trillient-style has a tri-barwith a blue dot, and the Black Dot Tri-Bar model features a‘wave cut’ reflector (except 41/2" model).7" Headlamp AssembliesFit all FL Softail ® , FLT, FLHT, FLHS and Road King ® housingsand CC #’s 26477, 26473 headlights. They’re also perfect forthe Adjure headlight housings elsewhere in this section.15719 Ice-style with ‘diamond cut’ reflector . . . . . . . . . .$69.5415721 Trillient style with ‘diamond cut’ reflector . . . . . .$99.95634062 Black Dot Tri-Bar with ‘wave cut’ reflector . . . . .$99.95634061 Skull-style with ‘diamond cut’ reflector . . . . . . . .$99.9553/4" Headlamp AssembliesFit all FX, FXR, Sportster ® and Dyna Glide models, as well asany of <strong>Custom</strong> Chrome’s 53/4" headlight assemblies. They’realso perfect for the Adjure headlight housings elsewhere inthis section.61233 Ice-style with ‘diamond cut’ reflector . . . . . . . . . .$59.9561235 Trillient style with ‘diamond cut’ reflector . . . . . .$77.95634060 Black dot Tri-bar with ‘wave cut’ reflector . . . . . .$77.95634059 Skull-style with ‘diamond cut’ reflector . . . . . . . .$77.9541/2" Headlamp AssembliesFits most custom 41/2" mini headlight housings.634058 Black dot Tri-bar with ‘diamond cut’ reflector . .$69.95German Rally BulbsStandard replacement bulbsavailable with up to 130 watt highbeam output for unbelievablenight time visibility.15135 55/60 watt . . . . . . . .$16.3915136 80/100 watt . . . . . . .$16.3915137 90/100 watt . . . . . . .$14.9915138 100/130 watt . . . . . .$22.99Clear Replacement Bulbs12527 55/60 watt . . . . . . . . .$8.6412529 55/100 watt . . . . . . .$12.99Xenon Boosted BulbsXenon boosted bulbs provide acleaner, whiter light.15139 55/60 watt . . . . . . . .$15.3915125 55/100 watt . . . . . . .$17.54Gold Multi-LayerDichoric BulbGold multilayer dichoric coatingprovides a full spectrum colorbeam.15140 55/60 watt . . . . . . . .$25.99‘Rainbow’ Coated BulbIncreases visibility in all weatherconditions due to its full-spectrumglass tint.15112 55/60 watt . . . . . . . .$19.995.12Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Headlamps & BulbsApparelBike Kits& TrailersSeats& BagsFootControlsHandControls<strong>Custom</strong> Halogen Light UnitThese light units have a replaceable bulb, and have been designed to fitinto any existing 41/2" light assembly with no modifications necessary. Threebladeddesign gives a nostalgic streamliner look to your current headlightbasket. 12 volt 60/55 watt halogen bulb included. Will now accept a P43Tbase halogen bulb. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$83.99330246 Gloss black center dot. H3-55 watt. Fits all 41/2" OEM and aftermarketshells, including Headwinds and Tradewinds styles‘Diamond Cut’ Halogen Headlight AssemblyThese 7"-diameter sealed beams are designed with high-performancecyclists in mind. Engineered for both low and high-speed riding, the 55/60watt halogen bulb projects a strong white beam of light directed <strong>by</strong> aunique gemstone-inspired reflector which utilizes a centered reversereflector to eliminate the dark center usually associated with halogenlamps. DOT approved. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$78.94330231 Fits 7" headlight housings<strong>Lighting</strong>ElectricalExhaustReplacement HalogenSpotlamp Sealed Beams12-volt halogen sealed beams fitmost 41/2"-diameter spotlamp andmini-light housings, and havescrew terminal wire attachments.Sold each. . . . . . . . . . . . . . . . . .$16.9915085 Single beam, 37.5 watt,70,000 candlepower(clear non-fluted lens)15086 Single beam, 50 watt,110,000 candlepower(clear non-fluted lens)*Note: The high power requirements ofthese bulbs may cause excessive drain oncharging systems. May not be legal inyour state, check local regulations beforeinstallation.Hi-Low Beam RelaySpecial 12-volt relay allows control of the hi-lowbeam from one wire using a momentary (horntype) button. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32.9917729 Sold eachIntakeEngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesScrew Terminal Type‘Rainbow Strobe’Lens Cage for H4 BulbsThree-panel filter cage allows motorcycle to bebetter seen when driving. For use with headlightswith H4 halogen bulbs. . . . . . . . . . . .$29.9915077 Sold eachForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.13CrossReference
<strong>Lighting</strong>5Headlight HousingsHeadlamp Housing Kitfor FL ModelsThis kit features chrome-plated componentsthat are accurate reproductions of the polishedOriginal Equipment parts fitted tomost 4-speed FL models from 1960 thru1984. It is also a natural for customizing anybike fitted with an early FL-style front end.Top-quality components make the kit a snapto install, with all needed hardware and a 7-inch halogen sealed beam that’s included.26531 Fits 4-speed FL models with OriginalEquipment or <strong>Custom</strong> Chrome tripletrees from 1960 thru 1984 (handlebarclamp cover is for non-dampermodels) . . . . . . . . . . . . . . . . . . . . .$429.99Replacement Parts26536 Set of left and right chrome-platedhousings (repl. OEMs 67847-60,67848-60) . . . . . . . . . . . . . . . . . . .$289.9926535 Chrome outer trim ring withrubber seal and four retainingclips (repl. OEMs 67712-60A,67716-60A and 67779-60) . . . . .$22.7926526 Retaining ring for sealed beam(repl. OEM 67765-60) . . . . . . . . .$25.8426893 Inner headlight mount with twoadjusting screws for FL models from 1960 thru 1969(repl. OEM 67702-65) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.9926894 Outer headlight bucket for FL models from 1960 thru 1984(repl. OEM 67766-60) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.4925234 Set of left and right chrome slider covers(repl. OEM 45964-49T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.5926537 Chrome handlebar clamp cover for use with steering damper(repl. OEM 58589-60) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.4926538 Chrome handlebar clamp cover for use without steeringdamper (repl. OEM 58590-60) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.49160097 Wiring plug fits all 3 prong headlights, spotlights and customdriving lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49160095 Adjusting screw (repl. OEM 67767-60) . . . . . . . . . . . . . . . . . . . . . . . . . .$3.99330071 Top Spring, fits all FL, FLT models 1960 up with 7" headlight(repl. OEM 67778-60) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99330072 Bottom Spring, fits all FL, FLT models 1960 up with 7"headlight (repl. OEM 67780-60) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99‘Wave’ HeadlightsBottom mount headlight with twoH3 12V/55W bulbs. The housingsare hand polished and chromed.They are E1 approved for highbeam and fog lamp! Measure152mm x 70.4mm x 60.6mm.Sold each . . . . . . . . . . . . .Call for price686772 Blue lens headlight686774 Clear lensheadlight‘Wave’ HeadlightsHeadlight for bottom or topmount (long holes) with two H312V/55W bulbs. Fit in fairings ornaked bikes. E1 approved for highbeam and fog lamp! Measure152mm x 70.4mm x 60.6mm.Sold each . . . . . . . . . . . . .Call for price686773 Blue lens headlight686775 Clear lens headlight‘Square’ HeadlightsHeadlight for bottom or sidemount with two H3 12V/55Wbulbs. Fit in fairings or on nakedbikes. E1 approved for high beamand fog lamp! Measure 150mm x51mm x 71mm.Sold each . . . . . . . . . . . . .Call for price686776 Blue lens headlight686778 Clear lens headlight‘Square’ HeadlightsHeadlight for bottom or uppermount with two H3 12V/55Wbulbs. Fit in fairings or on nakedbikes. E1 approved for high beamand fog lamp! Measure 150mm x51mm x 71mm.Sold each . . . . . . . . . . . . .Call for price686777 Blue lens headlight686779 Clear lens headlight5.14Prices appearing in this catalog are Suggested Retail Price and are subject to change*
SpotlampsApparelBike Kits& TrailersSeats& BagsFootControls41/2" Mini LightOur chrome 41/2" mini light assembly features a12 volt dual element sealed beam (high/low)with 10,000 candlepower, adjustable mountingblock, extra long wiring harness and a built-inhigh beam indicator. Sold each.330090 Mini light assembly . . . . . . . . . . . . . .$39.99330091 Shell ONLY (bulb not included) . . .$22.99Chrome 41/2" Mini Driving LightOur chrome 41/2" mini light features a TÜVapproved 12 volt 55 watt bulb, adjustablemounting block and built-in blue indicator light.Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.49330092 Mini light assemblyChrome Early StyleSpotlamp AssembliesChrome reproductions of the early 1938-1961style spotlamp assemblies. Available with 6 or12-volt bulb and original style clamp bracketfor 1938-1961 models and custom applications.These units duplicate the original design withseparate bulb, lens and reflector componentsand are ideal for restorations. Replacementparts are also available and can be interchangedwith original equipment spotlights. Sold each.12471 Complete assembly with 12-volt bulb(repl. OEM 68649-64) . . . . . . . . . . . .$40.99Replacement Parts12476 6V bulb (repl. OEM 68715-49) . . . . .$6.4912477 12V bulb (repl. OEM 68715-64) . . . .$6.4919239 Turn signal mounting kit – includesone of CC #’s 19237 and 19238(repl. OEM 68518-68) . . . . . . . . . . . .$11.59330102 Clear glass lens ONLY(repl. OEM 68660-38) . . . . . . . . . . . . .$7.54330105 Lamp reflector ONLY(repl. OEM 68676-38) . . . . . . . . . . . .$12.49Doss <strong>Custom</strong> Teardrop Spotlightswith Marker LightsDesigned to match perfectly with our teardropheadlights these new spotlights also work inOEM applications as well. They use stock stylespotlamps and feature a slick looking L.E.D.marker lamp built right in below the spotlamp.The marker light can be wired to flash alongwith your turn signals. They mount to to theOEM spotlight bars on all models and look evenbetter when used with the custom Doss V-stylespotlight brackets. OEM turn signals will have tobe relocated. Designed <strong>by</strong> Rick Doss. Sold inpairs.62406 Fits all Big Twin models with OEMtype spotlights . . . . . . . . . . . . . . .$199.9562412 Replacement amber LED turn signallamp assembly (sold each) . . . . . .$14.99HandControls<strong>Lighting</strong>ElectricalExhaustIntakeEngineGasketsTranny& Clutch<strong>Custom</strong> Ribbed 41/2" MiniDriving LightThese 41/2" mini driving lights aredesigned to match our custom ribbedheadlights (see page 5.11).330190 Mini light with dual filamenthalogen bulb . . . . . . . . . . . .$65.99330196 Chrome shell assembly(complete less bulb) . . . . . .$55.49DrivelineWheels,Tires& BrakesFrames<strong>Custom</strong> 31/2" Mini Driving LightThese 31/2" mini driving lights are chromed steeland come with 12volt, 60/55W halogen bulb.Available with visor or without visor.330198 Mini light with visor . . . . . . . . . . . . .$59.99330199 Replacement lens with reflector .$24.99Forks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.15CrossReference
Spotlamps & Brackets<strong>Lighting</strong>5Doss V-Style Spotlamp BracketsTired of the ‘sagging hammock’ look of factory spotlamp brackets? Here’s a V-stylishalternative designed <strong>by</strong> master customizer, Rick Doss, that bolts-on quickly and easily toreplace its Original Equipment counterpart. A matching rear turn signal mounting baris also available and can be found on page 5.65 of this catalog section! . . . . . . . . . . .$78.4946632 Fits FL Softail ® models from 1986 to present (repl. OEM 58082-87)46633 Fits all Road King ® models from 1994 to present (repl. OEM 68712-94)46654 Fits with Doss teardrop headlight housing kit (CC #46534)Spotlamps with <strong>Custom</strong> Housingand Visor Trim RingEasy-to-install custom spotlamps have chrome-plated,stamped steel housings with decorative scallops and onepiecetrim ring with a built-in visor. They use the same sealedbeams as standard spotlamps. Matching 53/4" and 61/2" headlightsare available on page 5.11 of this catalog section for acoordinated custom look. Sold each. . . . . . . . . . . . . . . . . . .$59.9912744 Fits all spotlamp-equipped models from 1968to presentDoss <strong>Custom</strong> Teardrop Spotlightswith V-Style BracketsThese exclusive Doss teardrop spotlights offer a great new look to any stock or custommotorcycle. They feature a teardrop housing with slick built-in L.E.D. marker light thatdoubles as an extra turn signal. They use any stock spotlamp and come complete withthe Doss V-style mounting brackets for the ultimate in custom styling.620999 Fits FLST Softail ® models from 1986 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . .$259.95620998 Fits Road king ® models from 1994 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . . .$259.95620997 Fits with Doss teardrop headlight kits 46534, 46336 and 46334 . . . . . . . . . .$259.95Ness-Tech ® Radius Spotlight BarsCurvaceous flowing designsmake this chrome plated billetaluminum spotlight mountingbar an eye-catching addition.Available with or withoutsuper-bright LED turn signals.They accept Ness-Tech ® ,Headwinds, OriginalEquipment or our popular<strong>Custom</strong> Chrome ® spotlights.Note: Designed as supplemental lighting ONLY, and should not be used toreplace Original Equipment running lights or turn signals.Fits FLHT and Road King ® and FLHTC Modelsfrom 1994 to Present04910 Bar with LED turn signals . . . . . . . . . . . . . . . . . . . . .$369.95Fits Heritage Softail ® Models from 1986 to Present04911 Bar with LED turn signals . . . . . . . . . . . . . . . . . . . . .$369.95<strong>Custom</strong> Spotlamp Bracket<strong>by</strong> Motherwell ProductsSolid steel construction, hand polishedand chromed to a show quality finish.Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$118.4937476 Fits all FL Softail ® models from 1986to presentSpotlamp MountingBracketsMount spotlamps or other auxiliarylighting to the front forks.For FL models 1949 thru 1984(repl. OEMs 68603-62, 68604-62).12517 Sold in pairs . .$36.495.16Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Spotlamps & BracketsApparelBike Kits& TrailersSeats& Bags15330FootControlsTrillient Bullet Black DotHandControls15467Spotlamp Kits <strong>by</strong> National CycleAdd extra lighting capacity to your bike <strong>by</strong>installing these kits directly to either the forktubes, or the lower triple tree. Includes spotlamps,turn signals and all required hardwareand clamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$269.9415330 Fits all FX Softail ® , Dyna Wide Glide ®and 4-speed FXWG models with 41mmforks from 1980 to present15467 Fits all FXR, Sportster ® and Dyna Glidemodels (except Dyna Wide Glide ®models) from 1988 to present‘Jeweled’ Spotlamp Lenses<strong>by</strong> AdjureThese DOT approved lamps feature halogen H335 watt bulbs, and reflectors with ‘diamond cut’or ‘wave cut’ reflectors to deliver powerful illumination.The ‘Ice-style’ is not shown but has asmooth, clear lens, but no bulb reflector. All ofthe spotlamps will fit most Original Equipmentand aftermarket housings. Sold in pairs.634054 Ice (diamond-cut reflector) . . . . . . .$89.90634055 Trillient (diamond-cut reflector) .$129.90634056 Black Dot Tri-Bar (wave-cut) . . . . .$129.90634057 Bullet (diamond-cut reflector) . . . .$99.90Chrome Spotlamp Housings<strong>by</strong> AdjureFinish off your ride with these affordablechrome 41/2" spotlamp housings that are availablein smooth and flamed styles to appeal toany taste. A wide variety of custom spotlamplenses are also available for a clean, cool look(see elsewhere on this page for photos of lensstyles). Sold each.634004 Smooth housing ONLY . . . . . . . . . .$149.90634005 Flamed housing ONLY . . . . . . . . . .$173.40Spotlamp Lenses (sold in pairs)634054 Ice (diamond-cut reflector) . . . . . . .$89.90634055 Trillient (diamond-cut reflector) .$129.90634056 Black Dot Tri-Bar (wave-cut) . . . . .$129.90634057 Bullet (diamond-cut reflector) . . . .$99.90<strong>Lighting</strong>ElectricalExhaustIntakeEngine12555Gaskets12469Tranny& ClutchChrome Spotlamp Mounting BarsAccurate reproductions of the stock bars.12555 Fits all 4-speed FL models from 1968thru 1984 (repl. OEM 68780-68) . .$65.5912469 Fits all FL Softail ® models from 1986 topresent (repl. OEM 58082-87) . . . .$63.8432356 Chrome 17/32" hole plugsfor spotlamp bar (pack of 10) . . . .$10.99Universal Toggle SwitchHandles 6 or 12-volt applications up to 35amps. It was used for the spotlamps on4-speed FL models from 1962 thru 1984 andHeritage Softail ® Classic models from 1987to present. . . . . . . . . . . . . . . . . . . . . . . .$6.4926097 Replaces OEMs 67844-70, 67858-89Halogen SpotlampsThese are Original Equipment parts. The 35 wattlamps feature clear lenses and distinctive reflectiveinner domes for a bright balanced light tocomplement your halogen headlight. Fit allOriginal Equipment and aftermarket spotlamphousings from 1968 to present. . . . . . . . . .$132.2975564 Replaces OEM 68208-98 (sold in pairs)Chrome Lamp InsertClassic "Tri-Bar" lamp insert adds a custom lookto spotlights. Chrome steel construction. Bolt oninstallation. Sold each. . . . . . . . . . . . . . . . . . . .$15.49330240 Fits 41/2" spotlampsHalogen Spotlamp Sealed Beams41/2" clear non-fluted 12-volt halogen sealedbeams throw lots more light than the stock22,000 candlepower and 30 watts.15085 70,000 candlepower/37.5 watts.Beam spread is 7° horizontaland 4° vertical . . . . . . . . . . . . . . . . . . .$16.9915086 110,000 candlepower/50 watts.Beam spread is 7° horizontaland 5° vertical . . . . . . . . . . . . . . . . . . .$16.99Note: May cause excessive charging system drain, and maynot be legal in all states.DrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.17CrossReference
Spotlamps & Brackets12485 124831255712480<strong>Lighting</strong>12489124861248212524124845Chrome Spotlamp and Mounting Bar KitsWe’ve taken our complete spotlamp assemblies and combined them withour chrome mounting bars to produce these complete kits. They’re availablewith or without dual filament turn signals and your choice of four differentstyles of sealed beams. Each kit includes all required wiring andconnectors and a toggle switch.Kits with Turn Signals for 4-Speed FL Models 1968 thru 198412556 With amber fluted sealed beams . . . . . . . . . . . . . . . . . . . . . . . . .$169.9912557 With clear fluted sealed beams . . . . . . . . . . . . . . . . . . . . . . . . . . .$204.4912592 With clear non-fluted sealed beams . . . . . . . . . . . . . . . . . . . . . .$199.99Kits without Turn Signals for 4-Speed FL Models 1968 thru 198412559 With clear fluted sealed beams . . . . . . . . . . . . . . . . . . . . . . . . . . .$138.9912593 With clear non-fluted sealed beams . . . . . . . . . . . . . . . . . . . . . .$135.99Kits with Turn Signals for Heritage Softail ® and Fat Boy ® Modelsfrom 1986 to Present12486 With amber fluted sealed beams . . . . . . . . . . . . . . . . . . . . . . . . .$192.4912487 With clear fluted sealed beams . . . . . . . . . . . . . . . . . . . . . . . . . . .$184.9912594 With amber non-fluted sealed beams . . . . . . . . . . . . . . . . . . . . .$190.9912490 With clear non-fluted sealed beams . . . . . . . . . . . . . . . . . . . . . .$180.99Kits without Turn Signals for Heritage Softail ® and Fat Boy ®Models from 1986 to Present12488 With amber fluted sealed beams . . . . . . . . . . . . . . . . . . . . . . . . .$144.9912489 With clear fluted sealed beams . . . . . . . . . . . . . . . . . . . . . . . . . . .$132.9912491 With clear non-fluted sealed beams . . . . . . . . . . . . . . . . . . . . . .$128.49Replacement Parts12481 Spotlamp rim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.9926097 Toggle switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49Late Model Spotlamps and Sealed BeamsChoose from a variety of chrome-plated reproductions of the late-modelspotlamps with your choice of four different 12-volt sealed beams.Replacement sealed beams for Original Equipment and aftermarket spotlampsare also available. Mounting clamps available separately. Sold each.Spotlamp Assemblies12483 With amber fluted sealed beam . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.9912480 With clear fluted sealed beam (repl. OEM 68667-78) . . . . . . . .$34.9912485 With amber non-fluted sealed beam . . . . . . . . . . . . . . . . . . . . . . .$38.9912591 With clear non-fluted sealed beam (not shown) . . . . . . . . . . . .$42.49Replacement Sealed Beams12482 Fluted amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.9912524 Fluted clear (repl. OEM 68674-69) . . . . . . . . . . . . . . . . . . . . . . . . . .$10.9912484 Non-fluted amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.9912590 Non-fluted clear (not shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.64Replacement Parts12481 Spotlamp rim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.9919238 Spotlamp housing mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . .$5.39Universal Headlight Bracket with TÜV ApprovalPolished billet aluminum dual headlight mounting bracket with decorativegrooves for most models and aftermarket triple trees, as well as for manyJapanese cruisers. Tapped with metric threads.85039 Universal dual headlight bracket . . . . . . . . . . . . . . . . . . . . . . . . . .$122.19Chrome 4" Halogen Light with Running LampTrick, small-diameter light can be used as a headlight or as an auxiliarylight. Great for custom bike builds, especially for dual light conversions.Features a replaceable H4 60/55 watt halogen bulb and low wattagedaylight running lamp. Includes chrome hardware for bottommount applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.6927912 Sold each5.18Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Headlight BracketsApparelBike Kits& Trailers4692112519Seats& Bags46923 46922FootControls46920Chrome Billet Headlight BracketsA wide variety of brackets <strong>by</strong> <strong>Custom</strong> Cycle Engineering make easy work of mounting headlights to<strong>Custom</strong> Cycle Engineering triple trees.46920 For 53/4" headlight, standard position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.0046921 For 53/4" headlight, recessed position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.0046922 For mounting headlight on 1993 thru 2003 Springer models . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.5046923 For mounting of 7" headlights (also requires CC #26491 bracket, not included) . . . . . . . . . .$52.5012536Chrome Bottom MountHeadlight Brackets<strong>Custom</strong> brackets for a sharp clean installation.12519 For Sportster ® , FX and FXR models1971 thru 1987 (except FXLR andFXRS Sport Edition models) . . . . . .$14.9912536 <strong>Custom</strong> bottom-mount bracket fitsall 4-speed FL models 1949 thru 1984with 53/4" headlight assemblies . .$13.99HandControls<strong>Lighting</strong>ElectricalExhaustIntakeEngine2647626491GasketsChrome Headlight BracketsUniversal fit for most 35mm fork tubes. . .$14.3912516 Sold in pairsHeadlight Lowering Kitsfor Springer Softail ® ModelsChrome billet mounts from Badlands move theheadlight to the bottom of the Springer shock.Includes all hardware and acorn nuts to matchthe other fastener on the front end. . . . .$119.9536930 For Springer Softail ® modelsfrom 1993 to present36929 For Springer Softail ® modelsfrom 1988 thru 19927" Headlight Mounting BracketsChrome brackets for mounting 7” headlightassemblies to Wide Glide ® front ends.26476 Fits FX Softail ® , Dyna Wide Glide ®and 4-speed FXWG models from1980 to present . . . . . . . . . . . . . . . . . .$16.9926491 Fits 4-speed FL modelsfrom 1949 thru 1984(repl. OEM 67810-48) . . . . . . . . . . . .$15.49Note: CC #26476 requires removal of lower tree cover, anddrilling and tapping lower tree on models from late 1985thru 2003.Tranny& ClutchDrivelineWheels,Tires& BrakesUniversal Headlight Bracketswith TÜV ApprovalAluminum mounting brackets for both, singleand dual headlight applications. CNC-machinedfrom 5mm thick aluminum and highly-polished.They fit most Original Equipment and aftermarkettriple trees. Sold each.85859 Dual headlight bracket . . . . . . . . . .$67.7985860 Single headlight bracket . . . . . . . . .$62.59Chrome HeadlightLowering BracketLowers the headlight 21/2" onlate 1988 thru 1992 SpringerSoftail ® models. . . . . . . .$53.9518026 Sold each3/4" HeadlightMounting BlockPolished aluminum 3/4"headlight mounting blockwith 3/8"-16 threads forbottom mount installations.634010 Sold each . . . . .$7.95FramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.19CrossReference
Headlight & Spotlight VisorsBEFOREAFTER<strong>Lighting</strong>5‘Frenched’ Headlamp Trim Rings<strong>Custom</strong>ize your stock headlight with these easy to install trim rings and covers. The extended depth adds a distinctive look. Replaces the Original Equipmenttrim rings or installs over them depending on model.15548 Fits FXST, FXSTB, FXSTC, FXLR and Dyna Glide models from 1994 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23.9915549 Fits FXSTS models from 1993 to present, FXSTSB models from 1995 thru 1997, XL1200C and 883C Sportster ® models from 1996thru 2003, FLSTS models from 1997 to present, FXR models from 1999 to present and Softail ® Deuce models from 2000 to present . . . . . . . . . . . . .$23.9915550 Fits Sportster ® models (except XL1200C and 883C) from 1963 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23.9915551 Fits FLSTC, FLSTF and FLSTN models from 1994 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.9915552 Fits FLHT, FLHS and Road King ® models from 1983 to present and FLST models with aluminum accessory headlight nacellefrom 1986 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99‘Frenched’ Passing Lamp Trim RingsMade with the same “frenched” look as the headlamp trim ring covers. Replaces the Original Equipment trim rings and includeschrome hardware. Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.9915547 Fits all models from 1962 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.99Chrome One-Piece Trim Rings with Integral VisorsImprove the look of your bike with these easy to install one-piece trim ringswith integral visors for headlights and spotlamps.Complete SetsIncludes a trim ring/visor for the headlight and a pair for the spotlamps.15458 Fits 4-speed FL models with fork tins and late-style spotlampsfrom 1949 thru 1959 (includes CC #’s 15453) . . . . . . . . . . . . . . . . . . . . .$63.99Headlight Trim Ring and Visor (sold each)15457 Fits most Original Equipment and aftermarket aluminumheadlight housings or single-headlight fiberglass fairings . . . . . . . .$40.0915453 Fits the 7" headlight on 4-speed FL models from 1949thru 1959 and <strong>Custom</strong> Chrome ® reproduction headlights . . . . . . . . .$34.995.20Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Headlight & Spotlight VisorsApparel12620Bike Kits& TrailersSeats& Bags12621FootControls12618Chrome Headlight VisorsDie-cast ‘eyebrows’ include appropriate holes for indicator lights on modelsthru 1991.12618 With four holes for Sportster ® , FXR and Dyna Glide modelsfrom 1986 thru 1991 (repl. OEMs 67805-86A, 67863-90) . . . . . .$29.0412620 With two large indicator light holes (repl. OEM 67809-75) . . .$42.5412621 Without light holes (repl. OEMs 67809-70, 67805-86) . . . . . . . .$27.1030106Chrome 7" Headlight Trim Rings with Built-In VisorsThese visors look like they were designed in and not added on. Styled tofollow the contours of the headlight housing. These pieces are sure togive your bike a fresh, unique look. Offered in two versions, Smooth Topor with a Raised Pointed Tip to blend in as a matching highlight on OEMtype 1960 thru 1984 FLH housings. Also looks great on FLHT and FLHSmodels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.1930106 Raised Pointed Tip version for 1960 thru 1984 FLH, CC #26536housings and 1980 to present FLHT and FLHS models30107 Smooth Top version for 1960 thru 1984 FLH, CC #26536 housings and1980 to present FLHT ,FLHS and Road King ® modelsfrom 1994 to present (not shown)HandControls<strong>Lighting</strong>ElectricalExhaustIntakeHeadlight ‘Eyebrow’AdaptersRiser bolt-mounted adapters makeit easy to use Sportster ® or FXRstyleheadlight visors (eyebrow)with a <strong>Custom</strong> Cycle Engineeringbillet triple tree. . . . . . . . . . . .$38.0046918 For rubber-mount risers46919 For rigid-mount risers‘Eyebrow’ CoversChrome-plated, stamped steelcovers for Sportster ® , FX, FXR andDyna Glide headlight brackets(eyebrows). Available with orwithout cutaway for warninglamps. . . . . . . . . . . . . . . . . . . . . .$15.2419641 Without cutaway19642 With cutaway1522215221330040330041EngineGasketsTranny& Clutch330042DrivelineHeadlight VisorsChrome-plated headlight visors are easily installed on our7" headlight assemblies (CC #’s 26473, 26477) as well as53/4" bottom and side mount headlights. . . . . . . . . . . . . . . . . . . . .$7.8415163 7" headlight visor (repl. OEM 67752-77T)15190 53/4" headlight visor (repl. OEM 67750-88T)Chrome Light VisorsSmartly designed and easy to install.15165 41/2" spotlamp visor. Sold in pairs . . . . . . .$7.99330032Embossed Eagle VisorsThese chrome steel visors feature a highly detailed embossedeagle emblem. Available in choice of all chrome or with goldaccented eagle.7" Headlight VisorsFits aluminum or steel FL headlights. Sold each.15222 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.09330040 Gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.9753/4" Headlight VisorsFits FX, FXR, XL, and Softail ® models with 53/4" headlight.Sold each.15221 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49330041 Gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.9941/2" Spotlight VisorsFits FL, FLT, and Softail ® models with 41/2" spotlights.Sold in pairs.330032 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.49330042 Gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.49Wheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.21CrossReference
Taillight & License Plate Kits47600Taillight<strong>Lighting</strong>5‘Fluid Style’ Billet Aluminum LED Taillightsand License Frames <strong>by</strong> Paul Yaffe Originals ®Ultra bright dual intensity LED taillight and brake light combination withplate illumination and stepped billet aluminum license frames have hiddenhardware for a clean look. Available in horizontal and vertical mount.Vertical Mount Light and Frame47628 Vertical side mount, use CC #’s 47611 thru 47617 chromebillet aluminum mounts for specific applications . . . . . . . . . . . .$467.9947611 Axle mount adapter for Softail ® models . . . . . . . . . . . . . . . . . . . .$114.9947612 Primary case mount adapter for Softail ® models . . . . . . . . . . . . . .$64.4947613 1" frame tube mount adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$126.4947614 11/8" frame tube mount adapter . . . . . . . . . . . . . . . . . . . . . . . . . . .$126.4947615 Peg mount adapter for Softail ® models . . . . . . . . . . . . . . . . . . . . .$121.9947616 Shock mount adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$78.9947617 Mount adapter for Pro-Street frames . . . . . . . . . . . . . . . . . . . . . . . .$81.99Horizontal Mount Light and Frame47629 Horizontal side mount, use CC #47630 chrome billetaluminum mounts for specific applications . . . . . . . . . . . . . . . . . .$447.9947630 Axle mount for Softail ® models from 1984 thru 1999 . . . . . . . .$142.9947632 Shock mount for FXR, FXD and Sportster ® models . . . . . . . . . . .$114.99Note: Installation of these accessories may be in violation of FMVSS Standard #10847610 with47613 mountVertical Taillight/License Mounts<strong>by</strong> Paul Yaffe OriginalsHot-looking license plate and Cateye taillightmount. Add the chrome-billet LED Cateyetaillight for the ultimate look.476184761947600 LED Cateye taillight ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$229.9947610 License plate mount with ‘Cateye’ LED taillight . . . . . . . . . . . . .$393.9947618 License plate mount with illumination light . . . . . . . . . . . . . . . .$239.9947619 License plate mount with square LED taillight . . . . . . . . . . . . . .$379.9947601 License plate mount only with ‘Cateye’ mount . . . . . . . . . . . . . .$179.9947611 Axle mount adapter for Softail ® models . . . . . . . . . . . . . . . . . . . .$114.9947612 Primary case mount adapter for Softail ® models . . . . . . . . . . . . .$64.4947613 1" frame tube mount adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$126.4947614 11/8" frame tube mount adapter . . . . . . . . . . . . . . . . . . . . . . . . . . .$126.4947615 Footpeg mount adapter for Softail ® models . . . . . . . . . . . . . . . .$121.9947616 Shock mount adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$78.9947617 Mount adapter for Pro-Street frames . . . . . . . . . . . . . . . . . . . . . . . .$81.994723747236Sidemount License Plate Frames for Softail ® ModelsMachined from billet aluminum. Features show quality chrome finish,hi-intensity LED taillight and channeled wiring. Both versions mount inplace of the outer axle spacer for a clean installation. Fit all 5-speed Softail ®models from 1986 thru 1999. Made in USA. . . . . . . . . . . . . . . . . . . . . . .$379.3947236 Horizontal mount47237 Vertical mountNote: Installation of these accessories may be in violation of FMVSS Standard #108Heartland USA Billet License Plate HolderChrome billet license plate holder comes with a side-mounted LED for amore modern look and better visibility while riding at night. It attaches tothe footpeg mounting point on the left-side of the bike. Use the 3/8" boltadaptor kit for when installing this kit on Softail ® models from 2000 topresent.23571 Complete kit for Softail ® models from 1986 thru 1999 . . . . . . .$399.9923572 Adaptor kit for models from 2000 to present . . . . . . . . . . . . . . . . .$19.99Note: Installation of this accessory may be in violation of FMVSS Standard #108.5.22Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Taillights & License Plate Kits‘Radius’ Side Mount Brake Caliperand Taillight/License Plate Mounts<strong>by</strong> Paul Yaffe OriginalsContoured to conform to the wheel and brake rotor on theright-side of your bike for a totally custom look. Chrome billetaluminum caliper mount and license plate frame have hi-Intensity LED taillights. Smooth design features hiddenmounting hardware and special channels milled into thebracket to hide wiring. For use with 18" wheelsONLY and RevTech ® or PM 4-piston calipers and7"-wide x 4"-tall license plates. . . . . . . . . . .$789.9947642 For Softail ® models from 1986 thru 1999(right-side mount)47644 For FXR models 1984 thru 1994 (rightsidemount)47643 For custom rigid frames with 111/2" rearrotors (right-side mount)Universal Taillight/License Plate MountSimilar to the kits above but without the integral caliper mount. Mountsto the left-side on most models and clears the 70-tooth belt pulley.47645 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$789.9947647 Billet clamp for 1"-diameter frame tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$132.9947648 Billet clamp for 11/8"-diameter frame tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$132.99Note: Installation of these accessories may be in violation of FMVSS Standard #108476424764447642ApparelBike Kits& TrailersSeats& BagsFootControlsHandControls<strong>Lighting</strong>Electrical‘The Answer’ LED OvalTaillight <strong>by</strong>Paul Yaffe OriginalsFeatures raw aluminum billet bezelthat is designed for a flawless flushmount installation. Can be lit withthe outer ring, center ring or bothat the same time! This permits manyturn signal and brake light combinations.Works with hard saddlebags,fenders and other custom applications.Made in USA. Sold each.47691 Large Answer LED lamp(measures approximately8" x 5") . . . . . . . . . . . .$299.9947697 Small Answer LED lamp(measures approximately4.75" x 3.5") . . . . . . . .$286.99Note: Bolts must be trimmed foryour application.‘Soon-2B-Copied’ Sidemount License Plate Frame<strong>by</strong> Paul Yaffe OriginalsSketched on a cocktail napkin during a plane ride home from the Indyshow, Paul Yaffe came up with the most radical sidemount design he hadever conceived. It’s filled with dozens of super bright LED’s and even hasthe exclusive strobing brake light for safety. Works with all PYO verticalsidemount brackets. Machined from 6061-T6 billet aluminum and thenflawlessly chrome-plated. Mounting brackets sold separately. . . . . . . .$407.99600041 Sidemount license plate frameUniversal Flat SurfaceMount <strong>by</strong> Paul YaffeOriginalsOriginally designed for the PYO‘Phantom’ frame because therewasn’t anywhere to install oneof our traditional sidemountbrackets on such an exoticframe. Requires two 1/4" x 20holes to be drilled and tappedand will work with any of ourvertical sidemounts. Machinedfrom 6061-T6 billet aluminumand chrome-plated. Mountinghardware included. . . . . . .$96.99600042 Flat surface mountLaydown Tubing Mountsbracket<strong>by</strong> Paul Yaffe OriginalsAn addition to the sidemount bracket collection, this laydown configurationfits 1" or 11/8"-diameter tubing. Created for use on the swingarm sectionof hardtail or Softail ® models, this “drill-and-mount” bracket reallyrakes the plate holders to almost parallel to the tube it’s mounted on.Works great with ‘Soncy’ sidemount or with any Paul Yaffe vertical plateholders. Requires drilling and tapping of two 1/4" x 20 holes. Machinedfrom 6061-T6 billet aluminum and then chrome-plated for quality.600043 For 1" tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$96.99600044 For 11/8" tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$96.99For the Dealer Nearest You, Call: 800-729-33325.23ExhaustIntakeEngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralCrossReference
Taillight & License Plate Kits<strong>Lighting</strong>0557986-313505627Doss Taillight Adaptor Bracket for Deuce ModelsChrome adaptor bracket from the mind of master customizer Rick Doss,will permit you to adapt many of CC’s three hole mounting licensebrackets to Deuce models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$120.4962567 Fits the rear fender of all Deuce models from 2000 to presentNote: Recommended for use with the following license brackets; CC #’s 05579, 65255, 86313,65111 and 47853.Ness-Tech ® ‘Laydown’ License Plate MountRecessed to protect your license plate. CNC-machined from 1/4"-thick billetaluminum. Include the mounting block and all necessary hardware. Fitmost models from 1973 to present (except Touring models, V-Rod ® models,and Big Twin models equipped with Fat Bob rear fenders).05627 Chrome backing plate without light mount . . . . . . . . . . . . . . . . .$59.9505579 Chrome backing plate for Cateye taillight . . . . . . . . . . . . . . . . . . .$74.95Folding Side Mount License Plate FrameChrome billet license mount folds out of the way using a uniquespring-loaded mechanism. Mounts to left passenger footpeg. . . . . . .$224.9928375 Fits Softail ® models 1984 thru 2003 or custom mount611220240209<strong>Custom</strong> License Plate Frames with Taillights<strong>by</strong> Choppers Inc.Unique aluminum license frames with an artistic flair. Manufactured out of6061-T6 billet aluminum with highly-polished finishes. They feature agroove behind the tag to hide the wires and are available in a Dice or IronCross design. The milled frame is recessed to accommodate the license platewhile providing a flush seam on the edges. Designed to mount on thefender or a a side-mount unit. Both styles have license plate illuminationand feature red plastic lens inserts and standard 1157 bulbs.240209 License plate frame with dice . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$579.99611220 License plate frame with Iron Cross . . . . . . . . . . . . . . . . . . . . . . . .$429.99Universal Taillight/LicensePlate Assembly• Made to mount on the left or rightside of your custom• Features 11/8" frame tube adaptor• Bracket mount fits customapplications only• Includes taillight695394 Sold each . . . . . . . . . . . . . .$205.495.24Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Taillight & License Plate KitsApparelBike Kits& TrailersSeats& Bags12775FootControls12760HandControls46686Reverse Detail<strong>Lighting</strong>46685License Framenot includedDoss Sidemount Taillight and License Plate BracketComplete with a Rick Doss designed taillight and hardware, or with provisionsfor a universal taillight of your choice, this unique design permits amore stable frame-mounting on either the left or right-side where theyclamp to the swingarm pivot axis tube. They’re available in standard bulbor LED versions to fit most Softail ® models from 1984 to present. The LEDunit features 60 individual LED’s and is substantially brighter than the standardunit.For Softail ® Models from 1984 thru 199946685 Complete kit with standard taillight . . . . . . . . . . . . . . . . . . . . . . . .$223.3946852 Complete kit with LED taillight . . . . . . . . . . . . . . . . . . . . . . . . . . . .$302.0946686 Side-mount bracket ONLY for universal taillight . . . . . . . . . . . . .$82.49For Softail ® Models from 2000 to Present99052 Complete kit with standard taillight . . . . . . . . . . . . . . . . . . . . . . . .$223.8946851 Complete kit with LED taillight . . . . . . . . . . . . . . . . . . . . . . . . . . . .$295.6999053 Side-mount bracket ONLY for universal taillight . . . . . . . . . . . . .$82.491275512757ElectricalExhaustIntakeEngineGasketsTranny& Clutch127564735647335Chrome Axle-Mount License and Taillight BracketsThese CNC-machined chrome-plated beauties are big and beefy. Verticalmountleft-side bracket includes mount for ‘Cateye’ taillight. Horizontalbracket for the right side. Fit Softail ® models 1986 thru 1999.47356 Complete left-side kit with mount and taillight . . . . . . . . . . .$202.9947334 Complete left-side kit without taillight . . . . . . . . . . . . . . . . . . .$187.4947335 Right-side horizontal license mount only . . . . . . . . . . . . . . . . . .$174.99Hinged Side-Mount License SystemKeep your side-mount license plate from getting knocked off <strong>by</strong> folding itclosed when parking close to other bikes. Hinge has detents in the openand closed positions. Your choice of chrome billet backing plates offer theoption of running with side taillight or not.Hinge Kits12755 Hinge, bracket and hardware for left or right-side on Softail ®models from 1986 thru 1999 (will not fit with saddlebags) . .$149.9512756 Hinge and mounting hardware for all models with lowerthrough-bolt on rear shocks. Mounts on left or right-side . . .$104.9512757 Universal mounting kit with hinge, hardware and weld-onframe tab to locate hinge where desired . . . . . . . . . . . . . . . . . . .$109.95License Backing PlatesBacking plates drilled with dual pattern to mount close to bike or 1"further out for clearance. Ball milled detail on back, and fit 7" x 4"license plates.12760 Backing plate and license plate trim ring for Cateye taillight(not included) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$129.9512775 Backing plate with license illumination lightwith license plate trim ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$184.95DrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.25CrossReference
Taillight & License Plate Kits<strong>Lighting</strong>5HorizontalRadialRacetrackNess-Tech ® Chrome TaillightsThree unique designs from Arlen Ness ® that give your bike a distinctive look. They are all CNC-machined frombillet aluminum and chromed. The ‘Stock’ versions fit the Original Equipment taillight mounts on all fendersfrom 1973 thru 1998 as well as on 1999 Softail ® models (except FLSTS and models with Fat Bob fenders). The‘<strong>Custom</strong>’ versions are for use in all other fender applications. All of the taillights are available with conventionalbulb illumination or with LED illumination.Conventional TaillightsRegular bulb lighting with 12-volt bulbs and allrequired wiring and hardware. . . . . . . . . . . . . .$219.95Stock <strong>Custom</strong>05631 05719 Horizontal design05632 05718 Radial design05633 05717 Racetrack designLED TaillightsIncrease your visibility while adding style. Includesmounting hardware. . . . . . . . . . . . . . . . . . . . . . . . .$299.95Stock <strong>Custom</strong>05943 05947 Horizontal design05942 n/a Radial design05941 05945 Racetrack designNote: Installation of these accessories may be in violation of FMVSS Standard #108. 1998 and later models with Original Equipment ’CircuitBoard Taillight’ rear fenders require CC #46642 taillight adaptor bracket.Chrome Billet Extra-WideTaillights <strong>by</strong> Pro-One Fit all custom 8" and 9"-wide Fat Bob rearfenders, and are available with or withoutbuilt-in amber turn signals. Also featurelicense plate lights with frosted lenses.Measure 65/8"-wide, 3"-tall and 115/16"-thick. Sold each.65527 Without turn signals . . . . .$157.9565528 With turn signals . . . . . . . . .$162.9519375Taillight and Bracket KitsEasy-to-install kits combine our most popular taillights withour top-quality custom license plate brackets for a clean,under-the-fender installation on all FX Softail ® , Dyna WideGlide ® (FXDWG) and 4-speed FXWG models. Kits are alsoavailable for the CC QuickBob fender conversion on 4-speedFX models.‘Cateye’ Taillight Kits19756 Fits Fat Bob rear fenders on FX Softail ® and4-speed FXWG models . . . . . . . . . . . . . . . . . . . . . . . . .$56.4919375 Fits Fat Bob rear fenders on Dyna Wide Glide ®models from 1993 thru 1998 . . . . . . . . . . . . . . . . . . .$77.9919758 Fits QuickBob rear fenders . . . . . . . . . . . . . . . . . . . .$57.99Note: Installation of these accessories may be in violation of FMVSSStandard #108.ZCB Taillightand License Plate BracketThis custom assembly has an eye-catchingshape and is made from heavy-duty ABSplastic to insure it’s durability. The lenshas an ‘E-Mark’ . . . . . . . . . . . . . .Call for price86313 Bolts to the top of mostcustom fenders87028 Replacement lensRBS License Plate Kit withTurn Signals and Taillightwith TÜVUniversal aluminum taillight assemblycomes with billet aluminum housing,license plate and turn signals. Includes anelectronic resistor for brake light circuit.Has ‘E’ mark on the taillight and turn signallenses. Available in natural or blackfinish.86636 Polished aluminum kitwith turn signals86057 Polished aluminum kitwithout turn signals86637 Black aluminum kitwith turn signal86066 Replacement taillight lens5.26Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Taillight & License Plate KitsApparelBike Kits& Trailers42925Seats& Bags4457944580FootControlsHandControlsChrome Der<strong>by</strong> Cover and Sidemount License <strong>by</strong> AccutronixA new idea for many Big Twin models, this domed der<strong>by</strong> cover incorporates a stylish sidemount licenseframe ... or vice-versa.For Big Twin Models from 1999 to Present44579 Der<strong>by</strong> cover and license frame . .$249.9544580 Der<strong>by</strong> cover and license framewith taillight . . . . . . . . . . . . . . . . . . .$419.95For Big Twin Models from Late 1984thru 199844593 Der<strong>by</strong> cover and license frame . .$249.9544594 Der<strong>by</strong> cover and license platewith taillight . . . . . . . . . . . . . . . . . . .$419.9542927<strong>Lighting</strong>Electrical4292542926ExhaustIntake1228442927Engine15237GasketsChrome Side MountLicense and Light MountThe plate holes are 53/4" x 35/8"center-to-center.12284 License plateholder . . . . . . . . . . . . .$9.9915237 Bracket for sidemount . . . . . . . . . . . . .$6.99RST Aluminum Side Mount License PlateBillet aluminum, axle-mounted, license plate mounting bracketwith license plate illumination. Available in black or polishedversions.686535 Polished for Softail ® models from 1984 thru 1999686536 Black for Softail ® models from 1984 thru 1999686537 Polished for Twin Cam 88 ® Softail ® models686538 Black for Twin Cam 88 ® Softail ® models4292542926Perewitz Side Mount LicensePlate BracketsA classic custom design has been updated <strong>by</strong>custom builder Dave Perewitz for improvedstrength and a hot look. Kits include our topselling chrome-plated die-cast Cateye taillight.42927 For all 5-speed Softail ® modelsfrom 1986 thru 1999 . . . . . . . . . . . .$166.4942925 For all Dyna Glide modelsfrom 1991 to present . . . . . . . . . . .$172.4942926 For all FXR models from late1987 thru 1999 . . . . . . . . . . . . . . . . .$156.99Tranny& ClutchDrivelineWheels,Tires& BrakesFramesSwingarm-Mounted Billet License Plate BracketThree-piece design permits mounting on either left or right-side of the swingarm. Will accepta standard Cateye taillight (not included) or any custom taillight with Cateye bolt pattern. Thebacking plate is also available separately. Fit all Softail ® models from 1984 to present. . .$149.9914113 Fits Original Equipment Softail ® swingarms (11/4" frame diameter)14093 Fits 11/8"-diameter aftermarket swingarms14098 Fits 1"-diameter aftermarket swingarmsComponents14114 License backing plate with Cateye mount ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$44.9914092 Mount ONLY for 11/8"-diameter swingarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$104.99Forks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.27CrossReference
Taillights & Adapters<strong>Lighting</strong>5Doss ‘Wide Tombstone’ TaillightA larger, restyled version of the 1947 thru 1954 Original Equipment taillightspecially-designed to fit the 1973 thru 2003 Original Equipment fendersand mounts. Turn signals mounted on light bars will need to be relocated.Includes block off plugs for light bar holes. Fits with stock or universallaydown license plate brackets.46400 Fits all models from 1973 thru 1998 as well as 1999 Fat Boy ®and Heritage Softail ® models (except FLSTS) . . . . . . . . . . . . . . .$101.6946409 Fits all Sportster ® , Dyna Glide and Touring models from 1999to present and all Fat Boy ® and Heritage Softail ® models from2000 to present (except FLSTS) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$113.9946214 Rubber spacer required for use with CC #13199 laydownlicense plate kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.19Note: Installation of these accessories may be in violation of FMVSS Standard #108Doss ‘Tombstone’ Taillight Kitfor Late Full-Fender ModelsHot look for Fat Boy ® and other models withfull rear fenders. The adapter bolts to andcovers the stock late-model taillight mount,while our popular die-cast ‘Tombstone’ taillightbolts to the adapter. Kit includes taillight,heavy-duty chrome-plated stampedsteel adapter, gaskets and hardware. FitsFat Boy ® models without modification from1990 to present. Also fits 4-speed FL models,5-speed FLT, FLHT, FLHS and Road King ®models to present, and Heritage Softail ®models from 1973 to present when turn signalsare relocated and turn signal light barremoved.19660 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$107.99Note: Installation of these accessories may be in violation of FMVSS Standard #108. 1999 andlater models with Original Equipment ’Circuit Board Taillight’ rear fenders require CC #46642taillight adaptor bracket.5.28Prices appearing in this catalog are Suggested Retail Price and are subject to change*Doss Taillight Adapter Bracketfor ‘Circuit Board Taillight’ RearFendersTired of being stuck with the stock taillight on your1998 and newer model, because of the way theOEM rear fender is made? Well, here’s the fix. TheDoss taillight adapter permits the use of virtuallyany custom taillight, such as the Aurora or Dosswide Tombstone, on 1999 and later modelsequipped with ‘circuit board’ taillights.46642 Taillight adaptor bracket . . . . . . . . . . . . $24.69
2700227000design <strong>by</strong> john reedU.S. Design Patent #422,72127021U.S. Design Patent #422,722TaillightsAurora Taillight and <strong>Lighting</strong> Accessories• Hot, <strong>Custom</strong> Look• Hidden Lens Mounts• Uses Aurora or Original Equipment Turn SignalsAn exclusive <strong>Custom</strong> Chrome ® lighting system that blends taillight, stop lightand turning indicators into one gleaming sculpture. Matching front turnindicators provide a total custom look that makes your bike stand out in acrowd. Die-cast, chrome-plated taillight is available with or without turnsignals. Fits all models with stock taillight mounts from 1973 to present(except Fat Bob fenders or late ‘Dresser’ models with stock saddlebags).Easily adapted to smooth custom fenders.27000 Complete taillight and turn signal kit with single filamentturn signals and red lenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$203.0927001 Taillight with arms ONLY (uses 1986 to 1998 FXR/Sportster ®model turn signal units) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$116.0927002 Taillight assembly without arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.9927009 Replacement gasket for taillight lens . . . . . . . . . . . . . . . . . . . . . . . . .$20.59698564 Replacement ‘thick’ base gasket for CC #27000 . . . . . . . . . . . . . . . . .$9.49688271 Replacement ‘thin’ base gasket for CC #27000 . . . . . . . . . . . . . . . . .$6.2927003 Replacement taillight lens for CC #’s 27000 thru 27002 . . . . . . . .$20.19688273 Replacement lens attachment screw for CC #’s 27000thru 27003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.4927005 Clear Aurora taillight lens ONLY for Original Equipmenttaillights from 1973 thru 1998 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.4927004 Red Aurora taillight lens ONLY for Original Equipmenttaillights from 1973 thru 1998 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99Note: 1999 and later models with Original Equipment ’Circuit Board Taillight’ rear fendersrequire CC #46642 taillight adaptor bracket.Aurora Turn SignalsThe perfect complement to Aurora taillights or a great custom look <strong>by</strong>themselves. Bolt directly to Original Equipment turn signal stalks from 1973to present (except FL-style). Twin circuit, two filament bulbs for both runningand turn signals. Sold in pairs.27020 Aurora turn signal set with red lenses . . . . . . . . . . . . . . . . . . . . . . .$84.7927021 Aurora turn signal set with amber lenses . . . . . . . . . . . . . . . . . . . .$84.7927008 Replacement red lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.8927029 Replacement amber lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . .$15.49Aurora Marker Light SetsA perfect match to the Aurora line or for a original custom look. Chromehousing, universal mounting, 12 volt, single filament bulb and lead wire.Sold in pairs.27023 Amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.9927024 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.99Replacement LensFor Aurora markerlite sets (CC #’s 27023, 27024) sold each.27027 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.6927028 Amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.89ApparelBike Kits& TrailersSeats& BagsFootControlsHandControls<strong>Lighting</strong>ElectricalExhaustIntakeEngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksDoss LED Triple Light KitConsists of a Doss ‘Wide Tombstone’ taillight (CC #46400) and a set of ourpopular LED bullet marker lights (CC #47664). Completely assembled withthe chrome stand-offs already installed. . . . . . . . . . . . . . . . . . . . . . . . . . . .$179.9962390 Fits all models from 1973 thru 1998 as well as 1999 Softail ® models(except FLSTS and models with Fat Bob fenders)Note: Installation of this accessory may be in violation of FMVSS Standard #108. The markerlights are designed as supplemental lighting ONLY, and should not be used to replaceOriginal Equipment running lights or turn signals.For the Dealer Nearest You, Call: 800-729-33325.29SheetmetalGeneralCrossReference
Laydown Taillight & License Bracket<strong>Lighting</strong>0971409710527376‘Laydown’ Taillight LensesMaintain your fender’s flowing lines <strong>by</strong> simply bolting on one of these lenses. They look greatwhen combined with one of our popular Laydown License Frames, and fit most models from1973 to present. Installation of the clear lens requires the use of one of our ‘Super Hi-Intensity’red taillight bulbs.For all Models from 1973 thru 1998 and 1999 Softail ® Models09710 Red lens ONLY (replaces OEMs 68034-77, 68033-90) . . . . . . . . . . . . . . . . . . . . . . . . .$26.1909818 Red ‘Blackout’ lens ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.7909714 Clear ‘Blackout’ lens ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.7915141 Super Hi-Intensity red taillight bulbs (box of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99 ea.For most Models from 1999-Early 2003Will not fit Deuce or FLSTS models. Uses the Original Equipment bulb socket assembly.27376 Red lens with reflector (replaces OEM 68140-99) . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.69For most Models from Late 2003 to PresentWill not fit Deuce or FLSTS models. Mates to the 4-pin AMP connector.627383 Red lens with reflector (replaces OEM 68369-03) . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.49627384 Red ‘Blackout’ lens with reflector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.99Note: Installation of these accessories may be in violation of FMVSS Standard #108.Laydown License Bracketfor Touring Models<strong>by</strong> Darrell Hayes <strong>Custom</strong> ConceptsDramatically improve rear styling on Touring modelswith the angled license bracket and rear fender braceassembly. It moves the license plate both closer to thefender and angles it for a smoother, flowing look(brackets do not work with luggage rack or oversizelicense plates).Angled License and Rear Fender Brace Assembly15669 Fits all Touring models from 1997 to present(repl. OEMs 53422-97, 53376-97) . . . . . . .$107.8915668 Fits Road King ® and FLHS models from 1993thru 1996; FLT and FLHT models from 1995thru 1996 (repl. OEM 47400-92) . . . . . . . .$107.89Replacement Parts15667 Angled license mounting plate ONLY.Fits Road King ® models from 1997 topresent (repl. OEM 53376-97) . . . . . . . . . . .$48.99Note: The Original Equipment fender brace is longer than that in thekits. When installed on the stock brace, the plate extends further tothe rear and larger plates may contact the taillight.‘Laydown’ Taillight Lenses with LED LightsDo wonders for your bike <strong>by</strong> adding one of these stylish taillight lenses.• Combine with a Laydown license frame for a great look• Most lenses feature ‘blacked-out’ outside walls for adimensional look• Equipped with LED lights and “pig-tail” plug-inor 4-pin AMP connectors for an easy installation• Fit most models with Original Equipment taillightsfrom 1973 to presentFor all Models from 1973 thru 1998and 1999 Softail ® ModelsThese lenses plug into the stock taillight bulb socket(replace OEM 68034-77 and 68033-90 taillight lenses).09723 Clear ‘Blackout’ lens . . . . . . . . . . . . . . . . . . .$73.9909728 Red ‘Blackout’ lens . . . . . . . . . . . . . . . . . . . .$73.99For most Models from 1999 to PresentThese lenses plug into the Original Equipment 4-pin AMPconnector on the fender (replace OEM 68140-99 and68369-03 taillight lenses).627380 Red laydown lens . . . . . . . . . . . . . . . . . . . . . .$68.99627381 Red ‘Blackout’ laydown lens . . . . . . . . . . .$73.99627382 Clear ‘Blackout’ laydown lens . . . . . . . . . .$73.99Note: Installation of these accessories may be in violation of FMVSSStandard #108.Note: There are two different styles of reflecting patterns on the lenses.CC #’s 09723 and 09728 have a square reflector pattern.CC #’s 627380, 627381 and 627382 have a vertical reflector pattern.5.3009723 RedTaillight andTurn SignalBulbs627382627380627381Prices appearing in this catalog are Suggested Retail Price and are subject to change*Standard BulbRed-coated lightbulb is ideal for use with clearlenses. 12-volt dual element bulbreplaces 1157R. . . . . . . . . .$3.79 ea.15184 Box of 10Super High-Intensity BulbThis red-coated light bulb is recommendedfor use with our clearlenses. The 12-volt dual elementbulb is rated at 50/14 candlepowerinstead of the standard 32/3 candlepowerand replacesan 1157R. . . . . . . . . . . . . . .$5.99 ea.15141 Box of 10
12951 12950TaillightsApparelBike Kits& TrailersSeats& BagsBlack-Out and <strong>Custom</strong> Taillight LensesOur blacked-out taillight lenses provide a striking new look with smallerlicense plate illumination windows. <strong>Custom</strong> lenses are the same, but withoutthe black-out feature. Fits all models from 1973 thru 1998 as well as1999 Softail ® models (except FLSTS models).12950 Blackout lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.9912951 Blackout lens with blue dot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.9912824 <strong>Custom</strong> lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.9912825 <strong>Custom</strong> lens with blue dot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99Note: Installation of these accessories may be in violation of FMVSS Standard #108.Replacement LED Taillight AssemblyChrome die-cast taillight assembly comes complete with a high-tech LEDarray and all required hardware to replace the Original Equipment unitfitted to many models since 1973 and in custom applications. . . . . . . .$64.4946848 Fits all models from 1973 thru 1998 as well as 1999 Softail ® modelsNote: Installation of this accessory may be in violation of FMVSS Standard #108.FootControlsHandControls<strong>Lighting</strong>ElectricalExhaustIntakeAurora Taillight LensAn exclusive <strong>Custom</strong> Chrome look. Matching turn signals and marker lightsare also available elsewhere in this section. Sold each. . . . . . . . . . . . .$18.9927004 Fits all models with Original Equipment taillights from 1973 thru1998 as well as 1999 Softail ® models (except FLSTS models)Diamond LED Taillight for Cateye MountsAttractive chrome billet aluminum housing has LED array with two brightnesslevels for taillight and brake light. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$273.9947620 Fits standard Cateye mountsNote: Installation of these accessories may be in violation of FMVSS Standard #108.EngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesOriginal Style TaillightChrome reproduction of the Original Equipment partused on most models from 1955 thru 1972.12511 Taillight (repl. OEM 68010-64B) . . . . . . . . .$34.4912952 Red plastic replacement lens . . . . . . . . . . . . .$4.9926236 Red glass replacement lens . . . . . . . . . . . . .$16.9912966 Red plastic lens with blue dot . . . . . . . . . . . .$9.4926237 Red glass lens with blue dot . . . . . . . . . . . .$22.9912510 White plastic replacement licenseplate lamp lens . . . . . . . . . . . . . . . . . . . . . . . . . .$4.1919481 Lens gasket (pack of 10) . . . . . . . . . . . . . . . .$15.4919482 Fender gasket (pack of 10) . . . . . . . . . . . . . .$16.9919773 Chrome 2-hole license bracket . . . . . . . . . .$21.4919770 Chrome 3-hole license bracket . . . . . . . . . .$19.99Maltese Cross II Taillight <strong>by</strong> Paul Yaffe OriginalsIf you thought the original Maltese Cross taillight was cool, check out the Maltese Cross II!Features sequential turn signals in the right and left arms. Mount this taillight on or in yourrear fender and the turn signals are built right in. Superbright LED’s and exclusive PYO strobingbrake light along with waterproof solid state circuitry, makes for safety. Machined from6061-T6 billet aluminum and flawlessly chrome-plated. Steel shadow boxis available for a frenching applications (sold separately).600046 Maltese cross II taillight with turn signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$591.99600079 Flush mount shadow box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.99Note: Load equalizer for bikes with self-cancelling functions required.For the Dealer Nearest You, Call: 800-729-33325.31FramesForks& ShocksSheetmetalGeneralCrossReference
Taillights<strong>Lighting</strong>Beehive Taillight<strong>Custom</strong> Dual TaillightReproduction of the taillight used on manyMeasures only 60mm diameter and license platemodels from 1939 thru 1946. Universal fender light, mounted onto a 150mm wide aluminummounting for most applications. Includesplate to fit aftermarket Fat Bob rear fenders.5 Tombstone Taillightchrome license mount, black rubber mountinggasket and 12-volt bulb.26357 Complete taillight (plastic lens)replaces OEM 68002-47 . . . . . . . . .$49.6926358 Plastic red lens . . . . . . . . . . . . . . . . . .$7.9926359 Plastic clear lens . . . . . . . . . . . . . . . . .$6.4926360 License bracket . . . . . . . . . . . . . . . . . .$7.9926361 Mounting gasket (sold each) . . . . .$3.99Note: Limited lens surface area does not meet modernDOT standards. CC does not recommend these taillightson vehicles newer than 1954.Not approved as a license plate light!85863 Taillight with ‘E’-mark . . . . . . . . . .$83.3984970 Replacement bulb, 12V21W(box of 10) . . . . . . . . . . . . . . . . . . . . . .$2.01 ea.84856 Replacement bulb, 12V5W(box of 10) . . . . . . . . . . . . . . . . . . . . . .$5.79 ea.LED Taillight Conversion Kit <strong>by</strong> AdjureMake sure they notice you with this LED kit that converts yourstock incandescent taillight into a brighter, longer lasting, LEDtaillight. It includes a new taillight lens and a 39 LED PC-boardthat plugs right into the original bulb socket on models from1973 thru 2002, or plugs right into taillight connector socketon models from 2003 to present. Installs in minutes with nowire splicing.634063 Fits all models from 1973 thru 2003 and Softail ® modelsfrom 1973 thru 1999(except FLSTS models) .$99.95634064 Fits all models from late 2003 to present(except Deuce models) . . . . . . . . . . . . . . . . . . . . . .$107.00Note: Load equalizer not requiredSuperbly crafted chrome die-cast replica of thetaillight used from 1947 thru 1954. Includes achrome license mount, black rubber mountinggasket and 12-volt bulb.19644 Complete taillight (plastic lens)replaces OEM 68003-47 . . . . . . . .$33.4919645 Plastic red lens with gasket . . . . .$5.2912965 Plastic red lens with blue dotand gasket . . . . . . . . . . . . . . . . . . . . .$9.4919670 Plastic clear lens . . . . . . . . . . . . . . . .$4.9919671 Chrome red lens bezel . . . . . . . . . .$7.9919654 Fender mounting gasket(sold each) . . . . . . . . . . . . . . . . . . . . .$3.4919646 License bracket . . . . . . . . . . . . . . . . .$6.4919668 Red lens gasket (pack of 10) . . .$10.9919669 Clear lens gasket (pack of 10) . .$10.99Note: Limited lens surface area does not meet modernDOT standards. CC does not recommend these taillightson vehicles newer than 1954.686367686368LED Mini Taillight with EG ABEAvailable either in polished billet aluminum or steel. The aluminum version has two threaded holes onthe back to be mounted directly to the fender. The steel version can be welded onto or into the fenderand then painted. Does not include license plate illumination. Mounting hardware is included. Allparts are sold separately.686366 LED mini taillight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.69686367 Billet aluminum housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$137.39686368 Steel weld-in housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66.59Tombstone Taillight with TÜVA 12-volt replacement for the Original Equipmentpart that includes the license plate bracket,hardware and mounting gasket. . . . . . . . . .$66.9984588 Replaces OEM 68003-47T5.32Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Taillights & License Plate MountsApparelBike Kits& TrailersSeats& Bags8605986058FootControlsMini and Micro Cateye Taillights with License Plate Bracket and TÜVABS Cateye taillights with aluminum license platebrackets to mount on the fender. Available intwo sizes. The Micro Cateye measures 65mmwide x 42mm tall. The Mini Cateye measures80mm wide x 55mm tall. Made of heavy-dutyABS plastic to last for years. The taillights are alsoavailable separately in black or chrome.Chrome Taillight Assemblies86058 Assembly with micro taillight . . . .$22.7986059 Assembly with mini taillight . . . . . .$22.7984985 Micro taillight ONLY . . . . . . . . . . . . .$13.1919377 Mini taillight ONLY . . . . . . . . . . . . . .$24.49Chrome Taillight Assemblies with TÜV686601 Assembly with micro taillight686602 Assembly with mini taillight686603 Micro taillight ONLY686604 Mini taillight ONLYBlack Taillights with TÜV686605 Micro taillight ONLY686606 Mini taillight ONLY47625HandControls<strong>Lighting</strong>ElectricalExhaust47627Intake34030619899LED Snake Eye TaillightFeatures 60 LED’s for maximum light intensityinside a durable chrome ABS housing and clearlens for license plate light. Mounting holes arespaced at 2" center-to-center using a 1/4"-20mounting stud. Taillight measures 61/8"-long,11/2" x 2"-high and 2"-deep. 30" wire harnesswith sheathing. . . . . . . . . . . . . . . . . . . . . . . . . . .$97.99600206 Sold eachComplete Taillight Assemblieswith LED ElementsInclude our <strong>Custom</strong> Chrome ® taillights with specialhigh-intensity LED arrays in place of the traditionalbulb. Arrays include rear-facing redLEDs and clear LEDs pointed toward license illuminationwindow.47625 1955 thru 1972 OEM-style . . . . . . .$144.9947627 <strong>Custom</strong> Fat Bob taillightwith chrome bracket . . . . . . . . . . . .$186.99EngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesFrames‘Sparto’ Taillights with TÜVThese early 1950’s “chopper” style taillightsfeature die-cast construction and are availablewith a 12-volt bulb or a high-output LED. Thetaillight is also available with powder coatedblack, chrome or polished finishes.Not DOT approved.340306 Powder coated black . . . . . . . . . . . .$43.9919899 Chrome . . . . . . . . . . . . . . . . . . . . . . . . .$35.99686599 Chrome with TÜV approval340308 Polished . . . . . . . . . . . . . . . . . . . . . . . . .$37.9946847 LED Taillight . . . . . . . . . . . . . . . . . . . . .$52.49‘Snake Eye’ TaillightWide and sleek custom taillights with a polishedaluminum bracket to mount on all fenders(except Fat Bob fenders). Made from heavy-dutychrome ABS plastic. Taillight measures approximately160mm x 40mm.86060 Taillight with bracket . . . . . . . . . . . .$27.6919380 Taillight ONLY . . . . . . . . . . . . . . . . . . .$27.49686600 Taillight with bracket with TÜV686607 Taillight ONLY with TÜVFor the Dealer Nearest You, Call: 800-729-3332Universal TaillightIncludes 12-volt bulb and mounting screws.12512 Taillight . . . . . . . . . . . . . . . . . . . . . .$15.4912513 Lens only . . . . . . . . . . . . . . . . . . . . . .$6.4912523 Replacement dual filament bulb(box of 10) . . . . . . . . . . . . . . . . . . . . .$1.55 ea.Note: Installation of these accessories may be in violation ofFMVSS Standard #108.5.33Forks& ShocksSheetmetalGeneralCrossReference
Taillights & License Plate Mounts<strong>Lighting</strong>5Oval Taillight Kits with Bracketsfor Fat Bob FendersA new look for bikes with Fat Bob fenders isavailable in this taillight kit from <strong>Custom</strong>Chrome ® . Includes the new Oval taillight withlicense illumination window and chrome-platedcustom-style bracket. . . . . . . . . . . . . . . . . . .$147.8419374 Fits Fat Bob fenders on Dyna WideGlide ® models from 1993 to presentComponent and Replacement Parts19372 Oval taillight assembly . . . . . . . . . .$50.9919371 Replacement red lens with bluedot ONLY . . . . . . . . . . . . . . . . . . . . . . .$17.4919905 Bracket for FX Softail ® and4-speed FXWG modelswith Fat Bob fenders . . . . . . . . . . . .$56.0919370 Bracket for Dyna Wide Glide ®models . . . . . . . . . . . . . . . . . . . . . . . . .$61.6919939Diamond Taillight and LicenseBracket KitsThe Diamond taillight is matched with a chromefender bracket for these great, easy-to-installkits. The taillight lens looks great when lit.Includes license illumination window. Chromedie-cast construction. . . . . . . . . . . . . . . . . . . . .$63.9919939 Fits Fat Bob fenders on FX Softail ® and4-speed FXWG models from 1980 topresent. Also fits CC stock replacementFat Bob fenders19941 Fits Fat Bob fenders on Dyna Wide Glide ®models 1993 to present19940 Fits QuickBob fender kits on 4-speed FXand Sportster ® modelsComponent and Replacement Parts19884 Diamond taillight assembly(Cateye mount) . . . . . . . . . . . . . . . . .$33.4919938 Replacement red lens . . . . . . . . . . . . .$6.4919757 Bracket for FX Softail ® and 4-speed FXWGmodels with Fat Bob fenders . . . . .$40.9919370 Bracket for Dyna Wide Glide ®models . . . . . . . . . . . . . . . . . . . . . . . . . .$61.6919759 QuickBob mounting bracket . . . .$45.49340466340466<strong>Custom</strong> Taillight/Turn SignalContoured to fit bobtail fenders on FXST andFXWG models 1980 to present (except newermodels with “circuit board” taillight), this customtaillight features a unique lighting systemwhich incorporates both the brake light andturn signals into one unit. It also features a slottedlens cover for a truly custom look. Bracketsold separately, Uses common light bulbs.340466 Taillight/turn signal assembly . . .$105.99Snake Eye Taillight Kitsfor Fat Bob FendersUnique variation of the classic Cateye design.The wide design will set your bike apart at anystoplight. Available in conventional and LED versions.Made of heavy-duty, chromed ABS plasticto last for years. Mounting holes are spaced at2" center-to-center using a 1/4"-20 mountingstud.Note: Installation of these accessories may be in violation ofFMVSS Standard #108Mini Cateye TaillightUnique variation of the classicCateye design. The design will setyour bike apart at any stoplight.Made of heavy-duty, chromed ABSplastic. Mounting holes are spacedat 2" center-to-center using a1/4"-20 mounting stud.19377 Taillight ONLY . . . . .$24.49Replacement Parts19366 Red lens . . . . . . . . . . . .$5.7919365 Lens gaskets(pack of 10) . . . . .$1.25 ea.Taillights with Brackets19381 For FX Softail ® and 4-speed FXWGmodels from 1980 to present . . . .$57.99647530 Same as CC #19381 but with LEDtaillight . . . . . . . . . . . . . . . . . . . . . . . .$133.2019382 For CC QuickBob fenders on FX4-speed models . . . . . . . . . . . . . . . . . .$59.49Replacement Parts19380 Taillight ONLY . . . . . . . . . . . . . . . . . . .$27.4919364 Red lens . . . . . . . . . . . . . . . . . . . . . . . . . .$3.4919363 Lens gaskets (pack of 10) . . . . . . .$1.25 ea.5.34Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Taillights & License Plate MountsApparel19900Bike Kits& TrailersSeats& Bags<strong>Custom</strong> Taillightand Bracket Kitsfor Fat Bob FendersFills the entire area on mostFat Bob rear fenders, (exceptDyna Wide Glide ® models) and isavailable with a chrome OriginalEquipment-style bracket or achrome-plated custom bracket.Fit FX Softail ® and 4-speed FXWGmodels with Fat Bob rear fendersfrom 1980 to present, and CC #’s26433, 13206 and 13204 Fat Bobrear fenders.19900 Kit with Original Equipment-style bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.9919907 Kit with custom bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$92.4919903 Red lens with jeweled blue dot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.99Replacement Parts19904 Taillight assembly ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$51.9919902 Original Equipment-style bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.9919905 <strong>Custom</strong> bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$56.0919901 Red lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.99Note: Installation of this accessory may be in violation of FMVSS Standard #108.Flush MountTeardrop TaillightsAdd smooth, street-rod styling toyour custom fender installationwith this clever design. The availablerecessed teardrop bucketmakes installation easy.65307 Taillight withred lens . . . . . . . . . .$47.9565308 Taillight withblue dot lens . . . . .$52.9565309 Bucket formountingtaillights . . . . . . . . .$29.95Note: Check available clearance betweentire and fender before mounting. Depthcan be trimmed slightly.19907197628586134030586061Cateye Taillights with TÜVThe most popular taillight on the market with TÜV approval!Available with chrome-plated die-cast or black anodized aluminumhousings, 12 volt bulb, and built-in license plate illumination.Mounting studs are spaced 2"center-to-center for a variety of applications. Sold each.19762 Chrome die-cast taillight . . . . . . . . . . . . . . . . . . . . . .$27.49340305 Chrome die-cast taillight with blue dot lens . . .$27.4985861 Chrome die-cast taillight with TÜV . . . . . . . . . . . .$29.9986061 Black-anodized aluminum taillight with TÜV .$205.7912522 Replacement bulb for CC #19762 (box of 10) .$1.10 ea.12968 Red lens with jeweled blue-dot . . . . . . . . . . . . . . . . .$10.9919763 Replacement red lens for CC #19762 . . . . . . . . . . .$7.9919764 Replacement white license plate lens . . . . . . . . . .$4.99FootControlsHandControls<strong>Lighting</strong>ElectricalExhaustIntakeEngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalExtra-Wide Fat Bob Taillight <strong>by</strong> Pro-One Extra-wide taillight fits most brackets for 8" to 9"-wideFat Bob rear fenders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.9565474 Sold eachGeneralFor the Dealer Nearest You, Call: 800-729-33325.35CrossReference
Taillights<strong>Lighting</strong>5‘Speed’ LED Mini Taillightwith E-MarkNew taillight for 2004. Includes brake and taillightand license plate illumination in a chromedABS plastic housing.686823 ‘Speed’ LEDMini Taillight . . . . . . . . . . . . . . .Call for priceHorizontalTaillight ONLYNess-Tech ® Cateye TaillightsUltra-slim, chrome billet taillights measure a paltry 1"-thick. They have top grooves for license plateillumination, and are available with or without a custom mount for smooth rear fenders. The taillightsONLY may be mounted on any flat surface and have the same bolt pattern as regular Cateye taillights.All taillights are available with conventional bulb illumination or with LED illumination.Conventional TaillightsRegular bulb lighting with 12-volt bulbs and all required wiring and hardware.Angled Horizontal05659 05660 Taillight with mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$209.9505661 05662 Taillight ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$149.95LED TaillightsIncrease your visibility while adding style. Includes mounting hardware.Angled Horizontal05863 05864 Taillight with mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$269.9505861 05862 Taillight ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$199.95Replacement PartsThese items are for the Conventional Taillights.05239 10 watt and 5 watt bulb kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.9905238 Replacement lens kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.95Note: Installation of these accessories may be in violation of FMVSS Standard #108.LED Mini Taillightwith E-MarkNew taillight for 2004. Includes brake and taillightwith aluminum housing, but does not havelicense plate illumination . . . . . . . . . . .Call for price686822 Chrome housing686820 Polished housing686821 Matt black housingAngled FenderMount TaillightLate TaillightOriginal-style taillight for all models from 1973thru 1998 as well as 1999 Softail ® models (exceptFLSTS and models with Fat Bob fenders).26100 Taillight (repl. OEM 68008-73A) . .$37.9926110 Replacement lens . . . . . . . . . . . . . . . . .$6.4912962 Taillight lens with blue dot . . . . . . .$15.4909700 Lens trim ring . . . . . . . . . . . . . . . . . . .$15.4909699 Chevron grill . . . . . . . . . . . . . . . . . . . .$14.8409695 Chevron grill with red plasticlens and blue dot installed . . . . . . .$25.9419483 Fender mounting gasket(pack of 10) . . . . . . . . . . . . . . . . . . . . . .$9.9919770 3-hole license bracket . . . . . . . . . . . .$19.99Replacement Parts for Late Taillights26039 Lens screws (repl. OEM 68026-73)pack of 10 . . . . . . . . . . . . . . . . . . . . . . . .$9.9926040 Lens gaskets (repl. OEM 68025-73)pack of 10 . . . . . . . . . . . . . . . . . . . . . . .$27.4926041 Mounting speed nuts(repl. OEM 7501) pack of 10 . . . . . . .$4.84Note: Installation of these accessories may be in violation ofFMVSS Standard #108. 1998 and later models with OriginalEquipment ’Circuit Board Taillight’ rear fenders requireCC #46642 taillight adaptor bracket.1937119372<strong>Custom</strong> Oval Taillightfor Fat Bob FendersFits <strong>Custom</strong> Chrome ® Fat Bob brackets forcustom taillights. Or create a custom mountfor other applications. Includes license illuminationwindow and 12-volt bulb.19372 Taillight assembly . . . . . . . . . . .$50.9919371 Replacement red lens ONLYwith blue dot element . . . . . .$17.49Chrome Fender Brackets19905 Bracket for FX Softail ®and FXWG models withFat Bob fenders . . . . . . . . . . . . .$56.0919370 Bracket for Dyna Wide Glide ®models . . . . . . . . . . . . . . . . . . . . .$61.69Maltese Cross TaillightComplete with 12-volt bulb. Universal mount.19649 Taillight . . . . . . . . . . . . . . . . . . . . . . . . .$16.9919650 Lens only . . . . . . . . . . . . . . . . . . . . . . . . .$5.79Note: Installation of these accessories may be in violation ofFMVSS Standard #108.5.36Prices appearing in this catalog are Suggested Retail Price and are subject to change*
TaillightsApparelBike Kits& TrailersSeats& BagsFootControlsHigh-Visibility Taillight <strong>by</strong> Velocity MotorcycleThe Velocity taillight uses Ultra Bright LED technology to increase yourvisibility and safety. These LED's were developed specifically for use intaillights, and emit light at a specific wavelength that is not “washed out”<strong>by</strong> light from the sun. This taillight has superior performance to LEDupgrades in existing taillights. Unlike stock style lenses designed for singlebulb “point” source lighting, the Velocity taillight lens is designed to utilizethe LED array for maximum effect. Estimated 100,000-hour bulb life.Die cast chrome plated construction, includes built in license plate light.Not DOT approved. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$139.99340400 Fits all models 1973 to presentBullet Style Universal TaillightThis die-cast metal taillight assembly has the look and feel of the heavychrome accessories of years past. Chrome plated and featuring thick rubbermounting gaskets. <strong>Custom</strong> mounting required, universal mounting hardwareincluded. All use standard 1157 dual filament bulbs, and have plasticlenses. Not D.O.T. approved.Universal taillight uses a custom base and license plate bracket to transforma turn-signal housing and lens into a unique taillight assembly. The red lensfeatures a clear window at the bottom for license plate illumination.340480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99HandControls<strong>Lighting</strong>ElectricalExhaustIntakeEngineGasketsTranny& ClutchDriveline’Lucas’ Taillightwith TÜVThe TÜV-approved versionincludes a chrome licensemounting bracket.86205 Taillight assemblywith TÜV (chrome bracket) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$45.2484866 Taillight assembly without TÜV (polished bracket) . . . . . . . . . . . .$25.7919647 Taillight ONLY without TÜV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.9986206 Replacement lens with TÜV . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37.2919648 Replacement lens without TÜV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.9912959 Lens with blue dot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.4985874 Replacement lens gasket only (sold each) . . . . . . . . . . . . . . . . . . . . .$2.49‘39’ Style Taillight with L.E.D.Take a trip down memory lane <strong>by</strong> adding aclassic touch of 1939.• Great match with 39’ style marker lights(CC #27042, page 5.65)• Equipped with red L.E.D.’s• Fits most Harley-Davidson ® models from 1973thru 1998 with OEM style fender and modelsfrom 1999 to present with (CC #46642) adapterbracket (except Fatbob fenders)27040 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$107.89Wheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.37CrossReference
Taillight Covers & Visors<strong>Lighting</strong>5Louvered Taillight Visor <strong>by</strong> KüryAkyn Louvered and chrome-plated visor is made of a durable compositematerial. It fits the late-style taillight on all models from 1973 thru1998 as well as 1999 Softail ® models (except FLSTS and models withFat Bob fenders). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.4948021 Chrome taillight visorTaillight VisorFits all Harley ® models from 1973 to present (except FXWG and FXST).340276 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49Chrome Die-Cast Cateye Taillight CoverDie-cast chrome grill that fits over the existing lens for an easy instantcustom look. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$20.9978504 Sold eachNote: Installation of this accessory may violate FMVSS Standard #108Chrome Visorfor Tombstone TaillightPrecision-formed steel visor installs in minutesand is held firmly in place between the lensand the bezel. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.9915179 Fits all Tombstone taillights330043Turn Signal VisorsFits FL style turn signals from 1963 thru 1984. Sold in pairs.330043 Gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49Fits front FLHT and FLST models from 1986 to present. Sold in pairs.330035 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.34330045 Gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.995.38Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Taillight Covers & VisorsApparel1516515164Bike Kits& TrailersSeats& BagsInferno Taillight Trim KitIncludes precision laser-cut stainless steel Inferno insert, clearlens cover and chrome-plate trim ring for a hot look.09720 Fits stock-style taillights on all models from 1973 thru1998 as well as 1999 Softail ® models (except FLSTSand models with Fat Bob fenders) . . . . . . . . . . . .$45.4909722 Replacement clear lens cover . . . . . . . . . . . . . . . . . . .$6.491516615167Chrome Light VisorsSmartly designed and easy-to-install chrome visors for most models.15164 Taillight visor for 1955 thru 1972 taillights (repl. OEM 68014-88T)sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.9915165 Spotlamp visor (repl. OEM 67783-78T) sold in pairs . . . . . . . . . . . . . . . . . . . . . . . . .$7.9915166 Bullet light visor – 13/4" (repl. OEM 67785-78T) sold in pairs . . . . . . . . . . . . . . . . .$2.59Turn Signal VisorsSold in pairs.15175 Fits the front of FLHT, FLHTC, FLHS, Road King ® and FLSTC modelsfrom 1986 to present (repl. OEM 67734-88T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.0415176 Fits the front of FLTC 1988 thru 2003; rear on FLTC, FLHT, FLHTC,FLHS, Road King ® , FLST, FLSTC, FXRD and FXRT models 1986to present (repl. OEM 67737-88T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.5415167 Fits the front of all 4- and 5-speed FL and FLHT models from1963 thru 1985 or the rear of all 4-speed FL and 5-speed FXRTmodels from 1963 thru 1985 (repl. OEM 67786-86T) . . . . . . . . . . . . . . . . . . . . . . . .$6.79FootControlsHandControls<strong>Lighting</strong>ElectricalExhaustIntake15222EngineGasketsChrome Skull Taillight CoverDress-up your ‘Tombstone’ taillight with one of these beautifulchrome-plated die-cast covers. give your Tombstone the‘Skull’ treatment (taillight not included). . . . . . . . . . . . . . .$36.4998649 Skull coverNote: Cover will not fit stock ‘Tombstone’ taillight on FLSTS models.Installation of these accessories may be in violation of FMVSS Standard #108.15220Tranny& ClutchDriveline15223Wheels,Tires& Brakes15221FramesChrome Taillight VisorsFeatures a cut-out for license plate illumination. Fits thelate-style taillight on all models from 1973 thru 1998 as wellas 1999 Softail ® models (except FLSTS and models with FatBob fenders). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.5912299 Plain (replaces OEM 68006-83T)‘Live To Ride’ Embossed VisorsChrome-plated steel visors feature an embossed eagle carrying a banner which says‘Live to Ride’.15220 Taillight visor for all models from 1973 thru 1998 as well as 1999Softail ® models (except FLSTS and models with Fat Bob fenders) . . . . . . . . . .$13.1915221 Headlight visor for all 53/4" bottom and side-mount headlights . . . . . . . . . . . . .$9.4915222 Headlight visor for 7" headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.0915223 Turn signal visors for the front of all 4- and 5-speed FL and FLHTmodels from 1963 thru 1985 or the rear of all 4-speed FL and5-speed FXRT models from 1963 thru 1985 (sold in pairs) . . . . . . . . . . . . . . . . . .$11.29Forks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.39CrossReference
License Plate Frames<strong>Lighting</strong>5Ness-Tech ® Radius License FrameCurved lines give a great modern look. Does notexpose mounting hardware. CNC-machinedfrom 6061-T6 billet and finished in chrome. Fullradius frames will work for most license plateinstallations. Sold each. . . . . . . . . . . . . . . . . . .$49.9505580 Fits 7"-wide x 4"-tall license platesDeluxe Chrome License Plate FrameThree-dimensional die-cast frame with emblemand border design. Fits license plates that measure7" x 4" with plate hole dimensions measuring53/4" x 23/4". . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.6419760 Sold eachPolished ‘Skull’ License Plate FrameSand cast in aluminum from a hand-carved moldand polished, this frame has impressive detail.Fits the standard 7" x 4" license plate used inmost states. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$47.7937857 Sold eachBackOFF ® LEDLicense Plate FrameLoaded with 16 dual circuit LED’s, this licenseplate frame doubles as auxiliary running andbrake lights. Simple three wire, color-codedinstallation takes only minutes. Ultra-brightLED’s have a 20,000 hour life span. Fits licenseplates up to 73/16" x 41/4". . . . . . . . . . . . . . . . .$58.94240195 Sold each‘Whiskers’ Marker Lights<strong>Custom</strong> License Plate Frames with LightsMilled from 6061 billet aluminum. Availablewith vertical marker lights (shown) orwith the lenses in horizontal orientation(backing plate and hardware not included).36921 ‘Whiskers’ license plate kitwith vertical lenses (shown) . . . . .$139.9536945 ‘Whiskers’ license plate kitwith horizontal lenses . . . . . . . . . . .$139.9505867 Replacement halogen bulb (5 watt)sold each . . . . . . . . . . . . . . . . . . . . . . . .$10.9912890 Replacement halogen bulb (10 watt)sold each . . . . . . . . . . . . . . . . . . . . . . . .$10.49Note: Use as supplemental lighting only. Not to replace stockrunning lights or turn signals.Ness-Tech ® License Frameswith LightsChrome-plated billet license frames with custombuilt-in marker lights. The light mounting surfacemachined at a 45° angle for side visibility.Fit standard plates (7" x 4"). . . . . . . . . . . .$119.9505208 Amber05210 RedNote: Marker lights designed to be used as supplementallighting only.Replacement PartsSold each.05215 Amber replacement lens . . . . . . . . .$3.9405214 Red replacement lens . . . . . . . . . . . .$3.9405216 Replacement light bulb . . . . . . . . . .$1.95Chrome License Plate Trim KitThis chrome license plate frame measures71/4" x 41/4". Mounting holes measure53/4" x 23/4" center-to-center. . . . . . . . . . . . .$15.49240136 License plate trim set (includes frame,backing plate and mounting screw set)License Mounting Screws240130 Mounting screw set. Includes 4 screws,acorn nuts and washers . . . . . . . . . . .$4.195.40Chrome License Bracket<strong>by</strong> Pro-One Billet bracket mounts the license plate tothe left-side upper and lower belt guard tabsof most Softail ® frames. Can be used withall standard three hole fender mountlicense frames. . . . . . . . . . . . . . . . . . . . . . . . . . .$94.9565468 Billet license bracketPrices appearing in this catalog are Suggested Retail Price and are subject to change*Ace Metal License Plate FramesJewelry-grade conchos decorate these CNCmachinedbillet aluminum parts. The Iron Crossand 8-Ball are glossy baked ceramic on a heavymetal base. The 3-D Skull is a polished nickelcasting with a dark background. Each concho ishandmade in the USA. Sold each. . . . . . .$71.9906050 3-D Skull06051 8-Ball06052 Iron Cross (not available in Europe)
License Plate FramesApparel623401Bike Kits& Trailers18936 18935Seats& Bags623400FootControlsPolished ‘Skull’ Chain Link and Maltese CrossPlate FrameSand cast in aluminum from a hand-carved mold and polished, this framehas impressive detail. Fits the standard 7" x 4" license plate used in moststates. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.14623400 Chain Link 623401 Maltese Cross (not available in Europe)19105 19106‘Live To Ride’ License Plate FramesThese frames match our other ‘Live To Ride’ covers, and fit most licenseplates measuring 7"-wide x 4"-tall whose mounting hole dimensions are53/4" x 23/4".18935 Chrome ‘Eagle Spirit’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.9919105 Chrome ‘Live To Ride’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.5918936 Gold ‘Eagle Spirit’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$50.9919106 Gold ‘Live To Ride’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.14HandControls<strong>Lighting</strong>ElectricalExhaust1915519157IntakeEngineDoss LicensePlate FramesHot looking design <strong>by</strong>master-customizer RickDoss. Chrome-plated die-castconstruction for 7"-wide x 4"-tall licenseplates. Frame only or with license plate illuminationlight to keep the law looking elsewhere. Includes chrome hardware.46056 Frame with illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.4946055 Frame without light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.89Eagle License Plate FramesFeature soaring eagles at the base of these die-cast frames. They fit licenseplates measuring 7"-wide x 4"-tall whose mounting hole dimensions are53/4" x 23/4".19157 Chrome and gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.4919155 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.99Note: These frames may not be compatible with the license bracket on 5-speed FLT, FLHT, FLHSand Road King ® models, or with CC #’s 13199, 14199 custom license brackets.GasketsTranny& ClutchDrivelineChrome License Plate Frames <strong>by</strong> Pro-One Chrome-plated billet frames fit the most common7" x 4" license plates and come complete with stainlessmounting screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$44.9565066 Ball milled65067 SmoothStreetWavez Programmable LicensePlate FrameChrome-plated license frame has aunique feature ... a scrolling text messagethat lights up in red LEDs. Itcomes with a programmable remotethat can store up to four differentmessages, and at the click of a button,can upload one of the messages to thelicense frame display. The messagelights up in full when when yourbrakes are first applied, and scrollsyour message after they’re released.Fits all models with license plates thatmeasure 7" x 4" (except Road King ®and ‘Touring’ models). . . . . . . . .$240.70699991 Complete kitWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.41CrossReference
License Plate Frames & Accessories13682<strong>Lighting</strong>5‘Fluid Stepped’ LicenseFrames with L.E.D.’s<strong>by</strong> Paul Yaffe Originals• Designed with sharp pointedcorners along with a ‘fluidstepped’ pattern, giving theultimate custom touch• Made of CNC-machined billetaluminum and chrome-plated• Features a strip of whiteL.E.D.’s for both horizontal andvertical plates• Both plates measure 7" x 4"• Fits motorcycle license platesmeasuring 7" x 4"• Sold each600024 Vertical plate with 3" L.E.D. strip . . . . . . . . . . . . .$229.99600025 Horizontal plate with 6" L.E.D. strip . . . . . . . . . .$243.8913684Motorcycle License Plate FramesAmerican-made frames for license plates measuring7"-wide x 4"-tall whose mounting holedimensions are 53/4" x 23/4". . . . . . . . . . . . . .$15.9913682 Chain13684 TwistedInspection Tag BracketProvides a place to display inspectiontags required <strong>by</strong> many statesincluding Virginia. Attaches underthe front axle nut. . . . . . . . . .$17.9920310 Fits most modelsChrome License PlateBolt KitKit includes four buttonhead bolts,nylon-inserted lock nuts, washersand wrench. . . . . . . . . . . . . . . . .$6.2919768 Complete kit1988515954License Plate ReflectorsThey measure 3/4" across the face and are idealfor mounting license plates. A 5/8"-long studwith a tension spring and wing nut holds theplate firmly in place.19778 Blue (display tub of 150) . . . . . . . . .$63.2419780 Blue (display tub of 40) . . . . . . . . . .$16.8919779 Red (display tub of 150) . . . . . . . . . .$63.2419781 Red (display tub of 40) . . . . . . . . . . .$16.898515936024Chrome License Plate AccessoriesBacking Plate19885 Fits plates measuring 7"-wide x 4"-tallwhose hole dimensions are 53/4" x 23/4" . . . . . . . .$7.141949685023Plate Frame15954 Fits plates measuring 7"-wide x 4"-tallwhose hole dimensions are 53/4" x 23/4" . . . . . . . .$5.49Colony Chrome Mounting Hardware KitFeatures rubber insulators to eliminate vibration.36024 Stove bolt-style with acorn nutsfor all slotted brackets . . . . . . . . . . . . . . . . . . . . . . . . .$5.9972065 Flathead sockethead screws withcountersunk washers and locknuts . . . . . . . . . . . . . .$9.9972066 Buttonhead sockethead screwswith flat washers and locknuts . . . . . . . . . . . . . . . . .$4.9919495Billet Aluminum ‘Documate’This handy unit mounts on the back of yourlicense plate bracket to hold registration, insuranceforms, and any other important documentsyou need while on the road. Includes knurledend caps with water resistant O-rings. Availablein laydown or upright styles. . . . . . . . . . . . . .$61.4919495 Fits ‘Upright’ license brackets19496 Fits ‘Laydown’ license brackets<strong>Custom</strong> MiniLicense Plate LightsCNC-machined from aluminumwith plain or grooved caps. Idealfor side-mounted license platebrackets or for bikes with limitedspace. These units won’t rust andresist vibration due to the highstrengthmaterial. Includes a bulb,wire and mounting hardware.Sold each.85023 Plain . . . . . . . . . . . . . .$38.3985159 Grooved . . . . . . . . . .$42.095.42Prices appearing in this catalog are Suggested Retail Price and are subject to change*
License Plate Kits & Brackets w/LightsApparelBike Kits& TrailersSeats& BagsLED License Plate withClear LensChrome plated die cast aluminumframe features brilliant red LEDstop/tail light with a clear lens,designed to have a white lookwhen not in use. Also featureslicense plate illumination. Not DOTapproved. . . . . . . . . . . . . . . . . . . .$65.99240095 Sold eachNess-Tech ® Light/License Plate KitChrome-plated backing plate is machined from billet aluminumto accept most custom taillights. The 30° bend permitsinstallation onto almost all custom rear fenders.84377 Includes a rubber mounting block $173.99Chrome Pro-Fat License Bracket<strong>by</strong> Pro-OneMade of chrome-plated steel, this extra-wideplate holder fits 81/2" and 9" Fat Bob fenders.Has mounting points for CC #65474 customFat Bob taillight. . . . . . . . . . . . . . . . . . . . . . . . .$109.9965428 For 81/2"-wide fenders65424 For 9"-wide fendersFootControlsHandControls<strong>Lighting</strong>Electrical34047028376License Plate IlluminationSmall chrome billet light mountsto upper belt guard tab toilluminate the licenseplate mount. . . . . . . . . . . . . . . .$72.9928376 Fits Softail ® models 1984 topresent or custom mountExhaustIntake240213 240212Donnie Smith Signature Series TaillightsDesigned exclusively for <strong>Custom</strong> Chrome <strong>by</strong> Hall of Fame bikebuilder - Donnie Smith, this side-mount taillight has a uniqueeyebrow shaped lens and concealed license plate retainer system.The high-output, high-intensity LED design consumesless power, lasts longer and outperforms most conventionalbulbs. Chrome billet construction. Available in vertical orhorizontal versions. Fits left side on Softail ® models from1987 thru 1999. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$349.99240212 Horizontal240213 VerticalTaillight/License PlateSide Mount KitsUniversal style brackets available for side mount.The kit works for either right or left side mounting.Works with Lucas or universal style taillight.340470 Bracket kit with Lucas style light . .$42.99340341 Bracket kit ONLY . . . . . . . . . . . . . . . . .$29.99EngineGasketsTranny& ClutchDrivelineSide Mount TaillightUniversal side mount bracketmade in the USA <strong>by</strong> NationalCycle. Each kit includes a DOTapproved 12-volt taillight. . .$53.9919888 Complete kitWheels,Tires& BrakesFramesLicense Plate Frame With Marker LightsChrome license plate frame is made of precision die-cast aluminumand features integrated vertical marker lights. Amberlenses with single filament 12 volt bulbs can be wired asmarker lights or turn signals. . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99240176 Sold eachTaillight Bracketsfor Fat Bob FendersAccurate reproductions of the Original Equipmentbrackets fitted to Softail ® and 4-speedFXWG models with Fat Bob fenders from 1980to present. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.8426494 Chrome (replaces OEM 59993-80TA)Forks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.43CrossReference
License Plate Mounts & Accessories<strong>Lighting</strong>51419913199Chrome Cover for Rubber LicensePlate Frame WedgeCovers the rubber mounting wedge on one of<strong>Custom</strong> Chrome’s all-time favorite accessories –the adjustable ‘Laydown’ license plates.Available in rounded or more square-corneredversions to fit either version of the rubbermounting block.14200 Rounded-corner cover . . . . . . . . . . . .$9.1914201 Square-corner cover . . . . . . . . . . . . . .$9.49Chrome ‘Laydown’ License Plate MountsClose-fitting, one-piece chrome-plated license plate mounts which can be used to replace the multipiecelicense plate mount and bracket on the rear fender. Two rubber spacers isolate the license platefrom vibration, and permit the mount to be tailored to the profile of the fender for a much tighter,cleaner look. They mount directly to the standard hole pattern on all rear fenders (except Fat Bob)from 1955 to present and come complete with mounting hardware.13199 Original-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.4914199 Pyramid-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$38.99Replacement Spacers13299 Set of replacement rubber isolation spacers. One each flat and wedge style . . . . . . . . . . . . .$6.49Chrome LouveredLicense Backing PlateFor license plates that measure 7" x 4" withplate hole dimensions measuring 53/4" x 23/4".The ideal companion to our louvered coil coversand battery covers. . . . . . . . . . . . . . . . . . . . .$12.4919889 Replaces OEM 59899-88TCurved Chrome ‘Laydown’ License Plate MountCurvaceous cousin to our popular CC #13199, the original laydown license mount. Not only can thismount be angled to the profile of the fender, it also follows the radius, for a tighter, cleaner look.Fits most models Includes hardware and rubber isolation spacers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.9914205 Curved ‘laydown’ license plate bracketChrome License BracketChrome reproductions of the license platebrackets for most models from 1955 topresent. Available in both two or threehole versions. . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.4919773 Replaces OEM 59995-55 (early 2-hole)19770 Replaces OEM 59983-75 (late 3-hole)5.44Prices appearing in this catalog are Suggested Retail Price and are subject to change*
License Plate Mounts & AccessoriesArlen Ness ® ‘Alternative’License Plate AccessoriesChrome plated. die-cast construction with anattractive price. Features hidden mountinghardware and may be used individually or withcustom laydown backing plate. Radius designblends the license frame and backing platetogether as one unit. Laydown backing platesmount directly to all Original Equipment fendersfrom 1973 to present (except Fat Bob fenders).Mounting hardware is included.05425 Stepped license frame . . . . . . . . . .$46.3505426 Stepped backing plate . . . . . . . . . .$52.2005427 Grooved license frame . . . . . . . . . .$46.3505428 Grooved backing plate . . . . . . . . .$52.20 0542605427ApparelBike Kits& TrailersSeats& BagsFootControlsHandControls<strong>Lighting</strong>Electrical05773ExhaustIntake05774EngineGasketsTranny& ClutchDriveline05774Wheels,Tires& Brakes05775Ness-Tech ® ‘Radius’ License Frame and MountsThe master’s touch is evident in this simple yet elegant design. Chrome-plated billet frame works with most backing plates. To complete the look, add one ofthe chrome billet backing plates with mounting block. The backing plate with light mount is angled for better light visibility.05773 License frame for small plates used in most states . . . . . . . . . . . .$49.9505774 Backing plate without light mount . . . . . . . . . . . . . . . . . . . . . . . . . .$89.9505775 Backing plate with angled mount for Cateye taillight . . . . . . .$109.95FramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.45CrossReference
Turn Signals<strong>Lighting</strong>5LED Conversion Turn SignalLamp Assemblies <strong>by</strong> AdjureDon’t get burned up <strong>by</strong> burned out bulbs! TheseDOT approved LED lamps last up to 8 timeslonger than conventional bulbs, burn cool anddraw only a fraction as much energy from thecharging system. They’re available in single elementversions for use as turn signals only, ordual element for use as a running lamp and turnsignal. Fit the flat turn signal housings on mostFLT, FLHT, FLHS, Road King ® and FL Softail ® modelsfrom 1986 to present. Sold in pairs. . .$159.9961222 Amber turn signal330535 Red turn signal/running lampNote: These assemblies require the additional purchase andinstallation of a “load equalizer” for proper operation.Late Model Turn Signal AssembliesReplace damaged Original Equipment turn signals or quickly change over from amber to red lenseswith these top-quality replacement parts.Front Turn Signal AssembliesDual filament turn signal units for most modelsfrom 1986 thru 2001. May also be used on therear of the motorcycle for increased visibility.Sold each.26143 Amber lamp unit without threads(repl. OEM 68404-86) . . . . . . . . . . . . . .$12.2426144 Amber lamp unit with threads(repl. OEM 68406-86) . . . . . . . . . . . . . .$12.2426635 Red lamp unit with threads . . . . . . . .$12.69Rear Turn Signal AssembliesSingle filament turn signal units for most modelsfrom 1986 thru 2001. All four versions are thesame with threads in the body, but some havean additional hole to route the turn signal wirethrough. Sold each.19590 Amber lamp unit with wiring hole(repl. OEM 68407-86) . . . . . . . . . . . . . .$12.2419591 Red lamp unit with wiring hole . . . .$12.6919592 Amber lamp unit w/o wiring hole(repl. OEM 68410-87B) . . . . . . . . . . . .$12.2419593 Red lamp unit w/o wiring hole . . . . .$12.69Replacement Parts12522 Dual filament bulbs (repl. OEM 68168-89) box of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.09 ea.12547 Single filament bulbs (repl. OEM 68572-64B) box of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.47 ea.15126 Lens O-rings (repl. OEM 68455-86) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.2926131 Amber lens ONLY (repl. OEM 68457-86) sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.6426132 Red lens ONLY (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.8922221 Amber lens with blue dot (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.8922967 Red lens with blue dot (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.891911419115Late ‘Touring’ Model Turn Signal AssembliesSingle and dual filament 12-volt turn signal units for mostmodels from 1986 to present.19114 Dual filament assembly (repl. OEM 68400-86) . . . .$22.9919115 Single filament assembly (repl. OEM 68402-86) . .$22.99Replacement Parts26124 Amber lens (repl. OEM 68440-86) sold each . . . . . . .$1.6415123 Amber lens with blue dot (sold in pairs) . . . . . . . . .$16.9926126 Red lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.0912969 Red lens with blue dot (sold in pairs) . . . . . . . . . . . .$19.9912522 Dual filament bulb (box of 10)repl. OEM 68168-89 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.09 ea.12547 Single filament bulb (box of 10)repl. OEM 68572-64B . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.47 ea.15150 Lens O-rings (repl. OEM 68451-86) pack of 10 . . . . .$4.995.46Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Red Taillight and Turn Signal BulbsStandard BulbRed-coated light bulb is ideal for use with clear lenses.12-volt dual element bulb replaces 1157R. . . .$3.79 ea.15184 Box of 10Super High-Intensity BulbThis red-coated light bulb is recommended for use withour clear lenses. The 12-volt dual element bulb is ratedat 50/14 candlepower instead of the standard 32/3 candlepowerand replaces an 1157R. . . . . . . . . . . . .$5.99 ea.15141 Box of 10Turn Signals & Kits75749ApparelBike Kits& TrailersSeats& BagsFootControlsHandControls75750<strong>Lighting</strong>ElectricalExhaustIntakeSuper BulbHigh intensity stop and taillight bulb has nearly 100% greater illumination.Long life and vibration resistance from triple-wound double filament.12-volt. Replaces #’s 1034 and 1157.12530 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.4912531 Pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99Note: May be unsuitable for installations with limited clearance with plastic lenses.Bullet-Style Turn Signal KitsThese are Original Equipment parts. These bullet lights are styled like thosefitted to Deuce models and add the perfect touch of style to your bike!Chrome reflector-optic signals include housing, lenses and supports. Kitsinclude four lights with mounts and required hardware.75750 Fits FX Softail ® models from 2000 to present, Sportster ®models from 1990 thru 2003 and all Dyna Glide modelsfrom 1991 to present (replaces OEM 68005-99) . . . . . . . . . . . . .$233.9975749 Fits all FX Softail ® models from 1988 thru 1999(replaces OEM 68007-99) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$206.99EngineGasketsTranny& ClutchDriveline1909326149Wheels,Tires& BrakesFrames2615419092Early Model FLTurn Signal AssembliesDual filament 12-volt turn signal assemblies formost FL models from 1963 thru 1985. Sold each.19092 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.9919093 Amber (repl. OEM 68557-70A) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.64Replacement Parts15127 Red lens ONLY (sold each) repl. OEM 68570-63 . . . . . . . . . . . . . .$1.9915128 Amber lens ONLY (sold each) repl. OEM 68571-63 . . . . . . . . . . .$4.9919098 Dual filament bulbs (box of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.49 ea.12964 Red lens with blue dot (sold in pairs) . . . . . . . . . . . . . . . . . . . . . .$15.49Early Model Turn Signal AssembliesSingle filament replacement turn signal units for FX, FXR and Sportster ®models from 1973 thru 1985.26154 Amber lamp unit with threads (repl. OEM 68514-73) . . . . . . .$12.9426122 Amber lamp unit without threads (repl. OEM 68515-77A) . .$11.8426155 Amber lens ONLY (sold each) repl. OEM 68483-73 . . . . . . . . . . .$1.4926149 Red lens ONLY (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.6412963 Red lens with blue dot (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . .$19.9912547 Replacement bulb (box of 10) repl. OEM 68572-64B . . . . . . . . .$1.47 ea.15160 Replacement gaskets (pack of 10) repl. OEM 68481-73 . . . . . .$10.94Forks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.47CrossReference
Turn Signals & Kits330787<strong>Lighting</strong>51512015107‘Flat-Style’ Turn Signal Lens KitsStylish kits are easy to install and available with four amber lenses or two amberand two red lenses. Complete with a heavy-duty flasher unit and special bulbs which are shorter overallthan stock to clear the lenses. Kits for models from 1986 thru 2001 include two dual filament bulbsfor the front to retain running lights. Fit all Sportster ® , FX, FXR, Dyna Glide and Softail ® models from1973 thru 2001 (except FXRD, FXRT, FLSTC and FLSTN).Complete Lens KitsInclude lenses, bulbs and flasher. . . . . . . . . .$22.991973-85 1986-0115099 15100 Amber only15119 15120 Amber and redReplacement LensesReplacement lenses (sold each) . . . . . . . . . . . .$4.991973-85 1986-0115117 15115 Amber15118 15116 RedReplacement Bulbs15114 Single filament (box of 10) . . . .$1.29 ea12523 Dual filament (box of 10) . . . . .$1.54 eaReplacement Flasher Unit25205 Sold each (repl. OEM 68541-64A) . .$4.99Complete Lens Kits with Blue Dot LensesInclude lenses with Blue Dots, bulbs and flasherfor all models from 1986 thru 2001. . . . . . .$31.9415106 Amber only15107 Amber and redReplacement LensesReplacement blue dot lens (sold in pairs) .$16.9915110 Amber15111 RedReplacement Bulbs15114 Single filament (box of 10) . . . .$1.29 ea12523 Dual filament (box of 10) . . . . .$1.54 eaReplacement Flasher Unit25205 Sold each (repl. OEM 68541-64A) . .$4.99Note: Installation of these accessories may be in violation ofFMVSS Standard #108.3307783307772000-Up Signal Lights for Deuce Models <strong>by</strong> Chris ProductsDirect replacement turn signal light for theSoftail Deuce model (FXSTD). This sleek newdesign works with 1973 to present style mountinghardware and can be used on most motorcycles.Available for front or rear. Sold each.330787 Front. Dual filament with amberlens (wires exit behindmounting hole) . . . . . . . . . . . . . . .$18.89330788 Rear. Dual filament with amberlens (wires exit throughmounting hole) . . . . . . . . . . . . . . .$18.89Replacement LensesSold each.330776 Amber . . . . . . . . . . . . . . . . . . . . . . . .$2.39330777 Red . . . . . . . . . . . . . . . . . . . . . . . . . .$1.34330778 Clear . . . . . . . . . . . . . . . . . . . . . . . . .$3.89Complete Turn Signal KitsGreat kit for building bikes from the ground up. Includes all clamps and support hardware to mountturn signal housings to handlebars and fender struts. One kit features late-model (1986 thru 2001)housings and amber lenses with dual-filament bulbs for the front and rear. The other has early-model(1973 thru 1985) housings and amber lenses with single-filament bulbs. Both include a pair of redlenses as a bonus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$76.5426148 Kit with late lamp units and dual-filament bulbs (1986-up)26147 Kit with early lamp units and single-filament bulbs (1973-1985)Flat Lens Turn Signal Kit<strong>by</strong> Chris ProductsFeatures a completely re-designed chrome housingthat uses standard full-size turn signal bulbsinstead of the miniature bulbs found in otherflat lens kits. Fit most Harley-Davidson¨ modelsfrom 1986 thru 2001. . . . . . . . . . . . . . . . . . . . .$68.4919597 Complete kit with two single filamentand two dual filament lamp unitsReplacement Parts19595 Single filament lamp unitwith threads (sold each) . . . . . . . . .$17.2419596 Dual filament lamp unitwith threads (sold each) . . . . . . . . .$17.2415128 Amber lens ONLY (sold each) . . . . . .$4.9915127 Red lens ONLY (sold each) . . . . . . . . .$1.995.48Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Turn Signal Lenses & CapsApparel16017160291602416030Bullet Turn SignalLenses <strong>by</strong>Motor City CycleReplace those boring lenseswith these cool units. Clearlenses look great when usedwith clear, amber, or red bulbs.Front and rear chrome flames flowin the proper direction.Sold in pairs.Bike Kits& TrailersSeats& BagsFootControlsHandControlsClear Turn Signal LensesThese clear lenses change the look of the turnsignals completely. When used in conjunctionwith amber bulbs the turn signal looks orangewhen lit. Sold each.Clear lens for Original Equipment turn signalunits on FL models from 1963 thru 1985and CC #’s 19092 and 19093.15157 Replaces OEM 68571-63 . . . . . . . . . . .$5.49Clear lens for Original Equipment turn signalunits on FLT, FLHT, FLHS and Road King ® modelsfrom 1986 thru 2003 and CC #’s 19114,19115.15158 Replaces OEM 68440-86 . . . . . . . . . . .$5.49Fit Original Equipment turn signal units on FLT,FLHT, FLHS and Road King ® models from 1986 topresent, and CC turn signals #19114 and #19115.16013 Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.9916029 Clear with flames, front only . . . . . . .$59.9916030 Clear with flames, rear only . . . . . . .$59.9916017 Amber with flames, front only . . .$59.9916018 Amber with flames, rear only . . . . . . .$59.9916024 Red with flames, rear only . . . . . . .$59.99Fit Original Equipment turn signal units on FLmodels from 1963 thru 1985, and CC turn signals#19092 and 1909316014 Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.9916031 Clear with flames, front only . . . . .$59.9916032 Clear with flames, rear only . . . . . .$59.9916019 Amber with flames, front only . . .$59.9916020 Amber with flames, rear only . . . .$59.9916026 Red with flames, rear only . . . . . . .$59.99Fit Original Equipment turn signal units on mostSportster ® , FXR, Dyna Glide and FX Softail ® modelsfrom 1986 thru 2001.16012 Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.9916027 Clear with flames, front only . . . . .$59.9916028 Clear with flames, rear only . . . . . .$59.9916015 Amber with flames, front only . . .$59.9916016 Amber with flames, rear only . . . .$59.9916022 Red with flames, rear only . . . . . . .$59.99<strong>Lighting</strong>ElectricalExhaustIntakeEngineClear lens for all FXR, Sportster ® and Dyna Glidemodels from 1986 thru 2001.15168 Replaces OEM 68457-86 . . . . . . . . . . .$4.3415198 Single element amber bulb(1156NA) box of 10 . . . . . . . . . . .$1.99 ea15199 Dual element amber bulb(1157NA) box of 10 . . . . . . . . . . .$0.78 eaGasketsTranny& Clutch1604016036DrivelineWheels,Tires& BrakesFramesChrome Front Turn Signal<strong>by</strong> Chris ProductsTurn signal features a clear lens includes adual filament amber bulb. Fits FLT, FLHT,FLHS and Road King ® models from 1986 topresent (replaces OEM 68400-86). . . . . .$21.9919894 Sold eachBullet Turn Signal Lenses for Deuce Signal Lights <strong>by</strong> Motor City CycleReplace your stock turn signal lenses with these stylish bullet lenses. Available with silver front-facingflames for both front and rear with a choice of either clear, red or amber lenses. Fits Deuce modelsfrom 2000 to present, and all models with snap-in lenses from 2002 to present. Sold in pairs.Front Lenses ONLY with Flames16039 Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.4916040 Amber . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.49Rear Lenses ONLY with Flames16036 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.4916037 Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.4916038 Amber . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.49Front or Rear Lenses without Flames16033 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.9916034 Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.9916035 Amber . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.99Forks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.49CrossReference
TMTMTurn Signal Accessories09707<strong>Lighting</strong>509709‘Mirage ® ’ Turn Signal Grills with Lenses• Chrome-plated die-cast zinc grills• Decorative black painted slots• Special flat lenses to enhance styling• Includes new chrome mounting screws• Matches over 22 other ‘Mirage ® ’ items• Fit the front of 1988 to present FLTCs and the rear of allFLTC, FLHT, FLHTC, FLHS, Road King ® , FLST, FLSTC, FLSTN,FXRD and FXRT models 1986 to present.27126 Mirage grills with amber lenses (sold in pairs) . . .$34.39Note: Installation of these accessories may be in violation ofFMVSS Standard #108.27127 Replacement red lenses (sold in pairs) . . . . . . . . . .$6.9927128 Replacement amber lenses (sold in pairs) . . . . . . .$6.9927129 Replacement clear lenses (sold in pairs) . . . . . . . . .$5.99‘Slotted’ Turn Signal Trim RingsChrome-plated stamped steel and include chrome mounting hardware. Sold in pairs.For Flat-Style LensesAvailable for the early and late model flat lenses fitted to the turn signalassemblies on most ‘Touring’ models from 1963 to present. . . . . . . . . . . . . . . . . . . . . . .$18.4909707 Late-style for 1986 to present modelsFor FX-Style LensesEasy to install. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.9909709 Late-style for models from 1986 thru 2001Note: Installation of these accessories may be in violation of FMVSS Standard #108.Mirage ® Turn Signal GrillsNow even the latest models can enjoy Mirage ® turn signalgrills. Our adjustable mounting reflector permits the slots tobe either vertical or horizontal. Easy-to install, and mount inminutes on all Softail ® (except FLSTC), FXR, Dyna Glide andSportster ® models from 1986 thru 2001. Sold in pairs.27107 Amber lens with dual filament bulbfor front turn signals . . . . . . . . . . . . . . . . . . . . . . . . . .$69.9927108 Red lens with single filament bulbfor rear turn signals . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.9927109 Amber lens with single filament bulbfor rear turn signals . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.9992141 Replacement red lenses (pair) . . . . . . . . . . . . . . . . . . .$9.4992142 Replacement amber lenses (pair) . . . . . . . . . . . . . . . .$9.49Note: Installation of these accessories may be in violation of FMVSSStandard #108.5.50Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Turn Signal BracketsApparelBike Kits& TrailersSeats& BagsShortened styles are four inchesnarrower than Original Equipment!FootControlsHandControls<strong>Lighting</strong>ElectricalRear Turn Signal Mounting BarsAvailable in shortened and stock lengths. Select the shortened bars to giveyour bike a cleaner look <strong>by</strong> moving the turn signals closer to the bike, orchoose the stock length to maintain the factory look. Economical die-castversions are available chromed or polished. Steel bars are chrome-platedand designed to be much more resistant to breakage than the die-cast part.Fits 4-speed FL Models from 1974 thru 1984, FL Softail ® Modelsfrom 1986 to Present and FLT, FLHT, FLHS and Road King ®models from 1991 to PresentShortened Stock Length19249 19246 Die-cast chrome (repl. OEM 68510-74B) . . . . . .$32.9912254 n/a Steel chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$61.51Fits all FLT, FLHT and FLHS models 1985 thru 1990 or FXRT andFXRD models 1983 thru 1992Shortened Stock Length12258 12256 Steel chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.49Note: Installation of shortened turn signal bars may be in violation of FMVSS Standard #108.19246ShortenedStock1225812256ExhaustIntakeEngineGaskets19249Tranny& ClutchBeforeDrivelineAfterWheels,Tires& BrakesFramesDoss Turn Signal Bracket FillerFills in the opening, hides the wiring, and givesyour turn signals a clean look. These chromeplatedsteel covers, designed <strong>by</strong> Rick Doss,install in minutes. Fits rear turn signal bracket(OEM 68510-74B) on FL Softail ® models from1990 to present, and FLT, FLHT, FLHS and RoadKing ® models from 1991 to present. . . . .$34.4919257 Sold in pairsShort Rear Turn Signal BracketsTired of kicking your turn signalsever time you swing a legover? These brackets look likethe stock factory items, but areless than half the length, andare perfect for getting thoserear turn signals in tight to thebike where they belong.Fits Sportster ® , FX Softail ® and4-speed FX models from1973 to present. . . . . . . . .$21.3919353 Sold in pairsForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.51CrossReference
Turn Signal Brackets<strong>Lighting</strong>Doss Marker Light Mirror Mounts09152 Sold in pairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23.4951923719238Turn Signal Relocation Brackets for Springer Softail ® ModelsChrome steel brackets provide an alternative mount for stock or custom turn signals ormarker lights. Sold in pairs with hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.4913257 Fits all Springer Softail ® models from late 1988 to present (lights not included)Chrome Turn Signal Mounting BracketEverything necessary for installing turn signals on the frontof 4- or 5-speed FL models from 1968 thru 1992. The universalmounting clamp permits installation on a variety ofmotorcycles.19239 Kit – includes one of CC #’s 19237 and 19238(repl. OEM 68518-68) . . . . . . . . . . . . . . . . . . . . . . . . . .$11.5919237 Standoff ONLY (repl. OEM 68519-68) sold each . .$4.0019238 Clamp ONLY (repl. OEM 68795-68) sold each . . . .$5.39Light Mounting BracketStrong, chrome-plated accessory lamp mountingbracket for bullet marker lights and/or mini lamps. Easilymounts to license plate mounting holes. . . . . . . . . . . .$6.0919096 Mounting bar09149Adjure Marker Light Mounts for Softail ®and ‘Touring’ ModelsThese mounts will permit you to install ‘Beacon’ marker lightsto the front or rear turn signal mounting bars on most FLSoftail ® and ‘Touring’ models from 1968 to present.Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.95634052 For ‘Beacon 1’ marker lights634053 For ‘Beacon 2’ marker lightsRelocation Clamp KitsPerfectly suited for use in relocating Original Equipment turn signals from your handlebarsor triple trees to your front forks. They come complete with all necessary hardwareand bolt-on in minutes. Sold in pairs.09148 Clamps for 39mm forks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.9909149 Clamps for 41mm forks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43.595.52Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Turn Signal BracketsApparel1924519244Bike Kits& TrailersSeats& Bags1924119236FootControls1924019242Chris Products Turn Signal MountsA wide selection of chrome turn signal mounting components to fit most modelsfrom 1973 to present. Sold each.19240 Clamp with screws (repl. OEMs 68487-82, 68486-82A) . . . . . . . . . . . . . . . . . . . . . . .$6.1919241 Rear support with screw (repl. OEM 68480-73) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.6919236 Rear support for Sportster ® models from 1994 thru 2003(repl. OEM 68480-94) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.1419230 Threaded rod for CC #19236 support (not shown) . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.9919242 Bracket between signal and bar clamp (repl. OEM 68477-73) . . . . . . . . . . . . . . . .$4.9919244 Rear turn signal threaded stud (repl. OEM 68493-87) . . . . . . . . . . . . . . . . . . . . . . . .$4.3419245 Same as CC #19244 but moves signals 1/2" closer to bike . . . . . . . . . . . . . . . . . . . .$9.34Turn Signal Relocation Kitfor Softail ® ModelsRelocates the rear turn signals further back to allow forsaddlebags. Fits FX Softail ® and 4-speed FXWG models from1984 to present. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49330629 Replaces OEM 68548-87HandControls<strong>Lighting</strong>ElectricalExhaustIntakeLowered Turn Signal KitThis custom lowered turn signal kit relocates the turn signalsfrom the fender struts to a new, lower position, whichprovides more clearance for installing saddlebags and givesa cleaner look. The chrome turn signal mounting bar isthreaded to accept stock type turn signals, and fastens easilyusing the license plate bracket mounting holes. Kit includeschrome turn signal bar, wiring, and hardware. Turn signalssold separately. Fits FX, XL, and FXR models 1973 to present.380220 Replaces OEM 68512-89 . . . . . . . . . . . . . . . . . . . . . . .$34.99EngineGasketsTranny& Clutch<strong>Custom</strong> Turn Signal Mounts for 39mm ForksChrome die-cast mounts move triple tree-mounted turn signals closer in to the centerlineof the motorcycle. They clear stock gas tanks when properly indexed. They may be fittedto models with 39mm forks which have turn signals hanging from the mirror stems. For1987 thru 2001 Sportster ® and FXR models and 1991 thru 1995 Dyna Glide models with39mm forks with turn signals mounted on the top triple tree. . . . . . . . . . . . . . . . . . . . . .$22.9927990 Sold in pairsDrivelineWheels,Tires& BrakesChrome TurnSignal BracketFits many Harley ® modelsfrom 1973 to present. . . . . . . .$14.49330651 Replaces OEM 68555-87Turn Signal Relocation Kitfor Dyna Wide Glide ® ModelsChrome kit relocates the rear turn signals further out whichallow for saddlebags. Required when installing saddlebagsupport kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49380202 Fits Dyna Wide Glide ® models from 1993 to presentFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.53CrossReference
Bullet-Style Marker Lights<strong>Lighting</strong>5Flush mount634052Halogen Lights (sold in pairs)The clear units are 50 watts, the red units are35 watts, and the amber units are 20 watts.Amber Red ClearSmooth 634027 634028 634029Housing $113.00 $113.00 $113.00Flamed 634030 634031 634032Housing $125.00 $125.00 $125.00LED Lights (sold in pairs)These units have 19 LEDs to provide light andwill run cooler than their halogen counterparts.The 2-wire lights may be used as turn signals,and the 3-wire lights will provide running andturn signal/brake lights.Amber Amber Red Red2-Wire 3-Wire 2-Wire 3-WireSmooth 634025 634026 634023 634024Housing $206.00 $206.00 $206.00 $206.00Flamed 634021 634022 634019 634020Housing $217.00 $217.00 $217.00 $217.00Marker Light Mount for Softail ®and ‘Touring’ ModelsPermits you to install ‘Beacon 1’ marker lightsto the front or rear turn signal mounting bars onmost FL Softail ® and ‘Touring’ models from 1968to present.634052 Sold in pairs . . . . . . . . . . . . . . . . . . . .$31.95HalogenAdjure ‘Beacon 1’ Marker LightsEnhance the looks of your ride with these chrome bullet-style marker lights. The flush mount designhas a 5/16"-24 threaded hole in the body for custom applications, and they measure 13/8" in diameterand are 27/8"-long. They are available with your choice of MR-11 halogen bulb or LED light sources,that may be purchased with clear, amber or red lenses. Chrome housing choices are smooth or flamed.The LED marker lights require the installation of a ‘load equalizer’ for proper operation. Includes 1/2"chrome standoff, nylon flat washer and 11/4" hollow stainless steel bolt.Note: Designed as supplemental lighting ONLY, and should not be used to replace Original Equipment running lights or turn signals.LEDReplacement LED PC BoardsSold each.634015 Amber 2-wire . . . . . . . . . . . . . . . . . . .$40.00634016 Amber 3-wire . . . . . . . . . . . . . . . . . . .$40.00634017 Red 2-wire . . . . . . . . . . . . . . . . . . . . . .$40.00634018 Red 3 wire . . . . . . . . . . . . . . . . . . . . . . .$40.00Replacement Parts330545 Clear lens (sold in pairs) . . . . . . . . . .$13.99330546 Red lens (sold in pairs) . . . . . . . . . . .$13.99330547 Amber lens (sold in pairs) . . . . . . . .$13.99330732 20-watt amber bulb (sold each) . .$13.99634069 35-watt red bulb (sold each) . . . . .$14.00634070 50-watt clear bulb (sold each) . . . .$14.00LED ‘Bullet’ Marker Lights<strong>by</strong> Paul Yaffe Originals ®High-intensity LED arrays in place of thetraditional bulbs. Vibration resistant, long lastingwith chrome housings. Mounts with a 5/16"hollow hex bolt on most flat surfaces. . . . .$149.9947664 Sold in pairsNote: Designed as supplemental lighting ONLY, not toreplace Original Equipment running lights or turn signals.Flushmount634053Adjure ‘Beacon 2’ Marker LightsThe Beacon 2 is a larger version of the Beacon 1,measuring 21/4" in diameter. The flush mountdesign has a 5/16"-24 threaded hole in the bodyfor custom applications. They come with yourchoice of MR-16 halogen bulb or LED lightsources, that may be purchased with clear,amber or red lenses, and the chrome housingsare available with smooth or flamed finishes.Please note that the LED marker lights requirethe installation of a ‘load equalizer’ for properoperation. Includes 1/2" chrome standoff, nylonflat washer and 11/4" hollow stainless steel bolt.Note: Designed as supplemental lighting ONLY, and shouldnot be used to replace Original Equipment running lightsor turn signals.Halogen Lights (sold in pairs)The clear units are 50 watts, the red units are35 watts, and the amber units are 20 watts.Amber Red ClearSmooth 634036 634035 634034Housing $113.00 $113.00 $113.00Flamed 634039 634038 634037Housing $125.00 $125.00 $125.00LED Lights (sold in pairs)These units have 40 LEDs to provide light andwill run cooler than their halogen counterparts.The 2-wire lights may be used as turn signals,and the 3-wire lights will provide running andturn signal/brake lights.Amber Amber Red Red2-Wire 3-Wire 2-Wire 3-WireSmooth 634040 634041 634042 634043Housing $206.00 $206.00 $206.00 $206.00Flamed 634046 634047 634044 634045Housing $217.00 $217.00 $217.00 $217.00Marker Light Mount for Softail ®and ‘Touring’ ModelsPermits you to install ‘Beacon 2’ marker lightsto the front or rear turn signal mounting barson most FL Softail ® and ‘Touring’ models from1968 to present.634053 Sold in pairs . . . . . . . . . . . . . . . . . . . .$31.95Replacement LED PC Boards (sold each)634048 Amber 2-wire . . . . . . . . . . . . . . . . . . .$63.59634049 Amber 3-wire . . . . . . . . . . . . . . . . . . .$63.59634050 Red 2-wire . . . . . . . . . . . . . . . . . . . . . .$63.59634051 Red 3-wire . . . . . . . . . . . . . . . . . . . . . .$63.59Replacement Parts330236 Clear lens (sold in pairs) . . . . . . . . . .$14.99330237 Red lens (sold in pairs) . . . . . . . . . . .$14.99634033 Amber lens (sold in pairs) . . . . . . . .$14.90634071 20-watt amber bulb (sold each) . .$14.00330239 35-watt red bulb (sold each) . . . . .$13.99330238 50-watt clear bulb (sold each) . . . .$13.995.54Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Bullet-Style Marker LightsApparelBike Kits& Trailers<strong>Custom</strong> and ‘Mini’ Bullet LightsThese 2"-diameter dual filament bullet lights are 20% smallerthan standard bullet lights for a clean custom look. Chromeplatedsteel with threaded stem for easy mounting. Sold each.‘Mini’ Bullet Lights230321 Amber with 2"-long stem . . . . . . . . . . . . . . . . . . . . . .$15.49<strong>Custom</strong> Bullet Lights230341 Amber with 2"-long stem . . . . . . . . . . . . . . . . . . . . . .$15.49Replacement Parts230266 Blue lens for Mini bullet lights . . . . . . . . . . . . . . . . . . .$1.84230267 Amber lens for custom bullet lights . . . . . . . . . . . . . .$1.84230268 Red lens for custom bullet lights . . . . . . . . . . . . . . . . .$1.84230269 Blue lens for custom bullet lights . . . . . . . . . . . . . . . . .$1.84230262 230253<strong>Custom</strong> Bullet LightsFeatures extended mounting stud for easy installation.Available with single or dual filament. 12 volt, 8 watt bulbincluded. Sold each.Single Dual Lens Color230262 n/a Amber$9.84230253 230263 Red$9.84 $9.846547865477Bullet Marker Lights <strong>by</strong> Pro-One Die cast marker lights are polished smooth then given a showchrome finish. Single filament bulbs and amber lenses with3/8" mounting holes. Optional colored lens kits are alsoavailable. Sold in pairs.65477 Smooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.9565478 Ball Milled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.9565475 Red lens kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.95280058280055Bullet Lightswith Mounting BracketThese chrome plated bullet lightsmount easily with a built-inmounting bracket. Includes singlefilament 12 volt, 8 watt bulb. Soldin pairs. . . . . . . . . . . . . . . . . . . . . .$21.49280055 Red280058 Amber15130Bullet LightReplacement LensesGlass or plastic replacement lensesfor CC and Original Equipmentbullet lights (except winged styles).Sold each.27993 White glass(not shown) . . . . . . . .$10.9927996 Red glass(not shown) . . . . . . . . .$6.4915129 Red plastic(not shown) . . . . . . . . .$2.4915130 Amber plastic . . . . . .$2.49For the Dealer Nearest You, Call: 800-729-333228004 19355<strong>Custom</strong> Bullet Marker LightsWith Visor (sold each)25293 Red (single filament bulb) . . . . . . . .$11.9928004 Amber (single filament bulb) . . . . .$15.4928001 Red (dual filament bulb) . . . . . . . . .$15.4928003 Amber (dual filament bulb) . . . . . .$15.49Without Visor (sold each)19355 Red (single filament bulb) . . . . . . . .$10.9928002 Amber (single filament bulb) . . . . .$10.6228000 Red (dual filament bulb) . . . . . . . . .$13.9928005 Amber (dual filament bulb) . . . . . .$13.99Note: Designed as supplemental lighting ONLY, not toreplace Original Equipment running lights or turn signals.Replacement Bulbs12523 Dual filament (box of 10) . . . . .$1.54 ea.27999 Single filament (box of 10) . . . .$1.09 ea.2799727998Bullet Lights with BracketsClassic styling, built-in chrome mounting bracketand single filament bulb for left or right-sidemount. Sold each.27997 Bullet light with right mount . . .$13.9927998 Bullet light with left mount . . . .$13.9927999 Replacement bulb (box of 10) . . .$1.09 ea.5.55Seats& BagsFootControlsHandControls<strong>Lighting</strong>ElectricalExhaustIntakeEngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralCrossReference
Marker Lights<strong>Lighting</strong>5330735KüryAkyn Small Silver Bullet Lights<strong>Custom</strong>ize your ride with these small Silver Bullet lights from KüryAkyn .Complete with wiring and hardware. Sold in pairs.330735 Universal 3/8" stud mount. 20 watt. Red, amberand clear lenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$91.84330736 Handlebar control mount. 20 watt. Red, amberand clear lenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.99330737 Fork mount. 20 watt. Clear and amber lenses . . . . . . . . . . . . . . . .$99.99Note: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.Ness-Tech ® ‘Alternative’2" Speeding BulletMarker LightsChrome-plated die-cast 2"-diameterconed design. Available in smooth orgrooved versions with single or dualfilament bulbs. Include amber andred lenses. Sold each. . . . . . . . . .$29.95Smooth Grooved04912 04914 Single filament04913 04915 Dual filamentReplacement Bulbs648313 Single filament bulb (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.95648331 Dual filament bulb (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.95Note: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.230360230361Mini Stretch Bullet LightsThese bullet lights are perfect for additional lighting on your raked outscooter. The sleek bullet shape combines function and style to give it thatadded custom touch. 11/4" x 3" Sold each.230360 Slotted with amber lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99230361 Slotted with red lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99230362 Smooth with amber lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99230363 Smooth with red lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99Replacement Lens230358 Amber lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.99230359 Red lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.99Note: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.Mini Marker Lights with Clamps<strong>Custom</strong> single filament marker lights. Available in red or amber. Measures13/4"-wide, 11/8"-tall and 15/8"-deep. With 5/16 thread mounting studs.Sold each as kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99Red Amber Clamp Size78088 78087 1/2"78090 78089 5/8"78091 n/a 3/4"Note: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.‘Magnum’ ChromeBullet Marker Lights12 volt dual-bulb lights mount tomost flat surfaces with a 5/16"hollow bolt. Includes red andamber lenses.28025 Marker lights(sold in pairs) . . . . .$70.8928024 Replacement amberlens (sold each) . . . . .$3.0928017 Replacement redlens (sold each) . . . .$3.095.56Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Marker LightsApparelU.S. Patent #4,420,803U.S. Design Patent #276,4683158131582Bike Kits& TrailersSeats& Bags3155631547Baron ® Marker LightsChrome-plated 12-volt marker lights feature precision die-castone-piece housings. The Mini lights measure 13/4"-tall x113/16"-wide and are 21/4"-deep, while the Baron ® Markerlights measure 21/8"-tall x 23/8"-wide and 21/2"-deep.Chrome-plated, injection-molded grill kits are soldseparately and include new screws.Note: Designed as supplemental lighting ONLY, not to replace OriginalEquipment running lights or turn signals.Baron ® Mini Marker LightsWith single filament bulbs.31580 Amber (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.7431581 Red (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.6431556 Lens grill kit (pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.49Baron ® Marker LightsWith single filament bulbs.31582 Amber (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.7931583 Red (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.2431547 Lens grill kit (sold each) . . . . . . . . . . . . . . . . . . . . . . . .$7.99Baron ® Marker LightsWith dual filament bulbs.31585 Amber (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.2431584 Red (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.2431547 Lens grill kit (sold each) . . . . . . . . . . . . . . . . . . . . . . . .$7.99Replacement Parts12551 Single filament bulb (#168) pack of 10 . . . . . . . .$1.09 ea.31590 Dual filament bulb (pack of 10) . . . . . . . . . . . . . . .$1.24 ea.31586 Amber lens for Baron ® Mini light (sold each) . . . .$3.1431587 Red lens for Baron ® Mini light (sold each) . . . . . . .$3.14Diamond Marker LightsOne-piece, chrome-plated die-cast housings with pedestal bases and a unique diamondshape. 12-volt, 4-watt single-filament bulbs. Measure 11/4"-high x 17/8"-wide. Sold each.27500 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.3927501 Amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.39Note: Designed as supplemental lighting ONLY, not to replace Original Equipment running lights or turn signals.Replacement Parts27510 Red lens ONLY (pack of 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.4927511 Amber lens ONLY (pack of 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.4909134 Bulbs (box of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.28 ea.AutoGem ShotGun LightsThe chrome light housing is incorporatedwith the rear fender and saddle bagmounting support. This system is designedto replace the Original Equipmentbracket (OEMs 53422-97, 47440-92),when using the laydown license bracket(CC #’s 15668, 15669). Lights have realglass lenses and stainless steel bezels.Made in the USA to fit all Touring modelsfrom 1993 to present. . . . . . . . .$54.9527309 Sold in pairsNote: Designed as supplemental lighting ONLY,not to replace Original Equipment running lightsor turn signals.FootControlsHandControls<strong>Lighting</strong>ElectricalExhaustIntakeEngineGasketsTranny& ClutchDrivelineLED Micro Marker Light with Amber LensDie-cast construction with polished chrome finish.230299 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99230261 Amber replacement lens (sold each) . . . . . . . . . . . .$2.99Note: Designed as supplemental lighting ONLY, not to replace OriginalEquipment running lights or turn signals.AutoGem Ba<strong>by</strong> Bullet Lights• Measure 11/8"-diameter x 21/4" from tip-to-tip• Uses 1"-long x 5/16"-18 mounting stud• 1"-diameter glass lenses are held in positionwith a spring and O-ring retention system• Comes with amber lenses, optional red and blue lenses are available• Use 12-volt single filament wedge base bulbs• Sold in pairs27317 Ba<strong>by</strong> bullets with amberlenses . . . . . . . . . . . . . . . . . . . . .$69.99240275 Ba<strong>by</strong> Bullets withblue lenses . . . . . . . . . . . . . . . .$69.99240273 Ba<strong>by</strong> Bullets withred lenses . . . . . . . . . . . . . . . . .$69.9927318 Optional amber lenses . . . . .$14.9927316 Optional blue lenses . . . . . . .$14.9927319 Optional red lenses . . . . . . . .$14.99Replacement Bulbs09134 .33 amps (box of 10) . . . . $1.28 ea.12551 .35 amps (box of 10) . . . . $1.09 ea.12552 .19 amps (box of 10) . . . .$1.09 ea.Note: Designed as supplemental lighting ONLY,not to replace Original Equipment running lightsor turn signals.Wheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-3332 5.57CrossReference
<strong>Lighting</strong>5Marker LightsDoss SquareMini Marker LightsSmall marker lights are almostinvisible mounted below thelower triple tree or othercustom installation. Includes redand amber lenses. . . . . . . .$44.9946380 Sold in pairsNess-Tech ® LEDMini Marker Lightsfor 1" and 11/4" BarsClean design mounts directly tohandlebars. Includes super brightamber LED bulbs and chrome-platedradius billet housings. Requiresdrilling and tapping of handlebartube. Sold in pairs. . . . . . . . . .$149.9504900 Fits 1" bars04901 Fits 11/4" barsNote: Designed as supplemental lighting ONLY,and should not be used to replace OriginalEquipment running lights or turn signals.Ness-Tech ® Universal Mini Marker LightsChrome LED lights are used as front or rear applications. CNC machinedfrom 6061-T6 billet aluminum. Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . .$129.9504904 Red lens04905 Amber lensNote: Designed as supplemental lighting ONLY, and should not be used to replace OriginalEquipment running lights or turn signals.Ness-Tech ® LED Mini Markerfor Front and Rear Light BarsSleek billet design replaces factory turn signals on all FL front and rearfactory light bars. Bright LED bulbs provide excellent visibility. Amber unitscan be used on front or rear applications; red units can be used on rearonly. Dual filament provides additional lighting possibilities. Chrome-platedunits are sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.9504906 Amber marker lights04907 Red marker lightsNote: Designed as supplemental lighting ONLY, and should not be used to replace OriginalEquipment running lights or turn signals.‘Ergo’ Mini Marker LightsOur "Ergo" die-cast marker lights feature smooth contoured styling withbrilliant chrome and amber lenses. They have 5/16" mounting holes to fitmost front forks, and hardware is included. Sold in pairs. . . . . . . . . . . . . .$62.99330813 Dual filament lightsNote: Marker lights intended for supplemental lighting only and not designed to replaceOriginal Equipment running lights or turn signals.5.58Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Doss Marker LightsApparelBike Kits& Trailers62053Seats& Bags46401FootControlsHandControls<strong>Lighting</strong>62072ElectricalDoss <strong>Custom</strong> Marker LightsChrome-plated die-cast construction. 23/4"-long,1"-wide x 11/8"-deep with single or twin singlefilamentbulbs. Lights with 3/8" mounting holesinclude hardware to mount to fender struts.Lights with 5/16" mounting holes fit most frontforks with the supplied hardware. Sold in pairs.3/8" Mounting Holes with Red Lenses09126 Single bulb light . . . . . . . . . . . . . . . .$44.6909129 Twin bulb light . . . . . . . . . . . . . . . . . .$46.295/16" Mounting Holes with Amber Lenses09127 Single bulb light . . . . . . . . . . . . . . . .$41.5909130 Twin bulb light . . . . . . . . . . . . . . . . . .$43.19Replacement Parts09123 Red lens (sold each) . . . . . . . . . . . . . .$4.4909128 Amber lens (sold each) . . . . . . . . . . .$4.4909134 Single filament bulbs(box of 10) . . . . . . . . . . . . . . . . . .$1.28 ea.Note: Designed as supplemental lighting only, not to replaceOriginal Equipment running lights or turn signals.4640446403Doss Round Marker LightsModern design has dual filament bulbs andunique smooth mounting with a recessed areafor a caliper insert. Includes red and amber lenses,mounting hardware and our standard caliperinserts. You can upgrade these marker lightswith any 1.80" caliper insert available in themarket today. Sold in pairs.46401 Front lights and mirror mount kitfor the stem on all models from1972 to present . . . . . . . . . . . . . . . . .$62.9946403 Front lights for 5/16" mounting hole formost front forks (39mm forks requireCC #27990 signal mounts) . . . . . . . .$59.9946404 Front lights and mounting kit formodels with 41mm fork tubes . . . .$76.9946405 Front lights and mounting kit formodels with 39mm fork tubes . . . .$76.9998234 Replacement bulbs(pack of 10) . . . . . . . . . . . . . . . . . .$1.09 ea.Doss ‘Teardrop’ Marker LightsThe dual bulbs and distinctive shape of theseRick Doss-designed marker lights make themideal for specialized lighting requirements.Easy-to-install applications for all models from1972 to present. Sold in pairs.62053 Front lights and mirror mount kitfor the stem on all models from1972 to present . . . . . . . . . . . . . . . . .$64.9962068 Front lights and mounting clampsfor models with 41mm forks . . . . .$76.9962072 Front lights with 5/16" mounting holesfor most front forks . . . . . . . . . . . . . .$65.99ExhaustIntakeEngineGasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.59CrossReference
Mirror/Fork Marker Lights<strong>Lighting</strong>5Doss Chrome Billet Side-Mount Marker Light KitsAnother stylish product from master customizer, Rick Doss, and a great wayto clean up the front end of your bike. They’re made from chrome-platedbillet aluminum and feature front and rear amber lenses and twin bulbs inthe housing to maximize visibility. A variety of kits are available to fit manymodels including all FL Softail ® models with Original Equipment ‘tins,’ aswell as some our most popular aluminum housing headlight kits.46166 Fits all FL Softail ® models from 1986 to present (shown) . . . . . .$59.9962040 Fits all 4-speed FL models with aluminum headlight nacellesfrom 1960 thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.9962310 Fits CC #’s 46534, 46336 ‘Teardrop’ headlight housing kits . . . .$110.9962311 Fits CC #’s 26747 ‘Spearpoint’ headlight housing kits . . . . . . . . .$110.99Note: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.Mirror Mount Side Light Mini MarkersRectangular mini marker lights come with side illuminationfor increased visibility and a custom look. Mounts to the baseof the mirror with threaded adapter. Sold in pairs.330755 Kit with twin bulb lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$51.99Note: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.6539365395091556539465396‘Millennium’ Triple Tree Light Bars <strong>by</strong> Pro-One Chrome-plated billet marker light bar mounts through theheadlight mounting bolt and features flush mounted ellipticalamber lenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.95Smooth Ball Milled65393 65394 For Wide Glide ® front ends65395 65396 For narrow glide front endsNote: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.Doss Marker Light Kitsand Mirror MountsComplement your Original Equipmentturn signals with a pair of our Doss markerlights. They come with one or two 12-volt single filament bulbs, and bolt-on inminutes to all models from 1972 to present.Each set includes a pair of lights andall necessary mounting hardware. Sold in pairs.09152Complete Kits with Lights09155 Kit with twin bulb lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.4909156 Kit with single bulb lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.99Note: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.Replacement Parts09152 Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23.4909128 Amber lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.4909123 Red lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.4909134 Single filament bulbs (box of 10) . . . . . . . . . . . . . . . . . . . . . . . . .$1.28 ea5.60Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Fork & Fender Marker LightsApparelBike Kits& TrailersSeats& BagsFootControlsHandControls<strong>Lighting</strong><strong>Custom</strong> Marker Lights <strong>by</strong> Darrell HayesTwo-piece housings clamp securely to the fork tubes and include plasticsleeves for universal attachment to 35mm, 39mm or 41mm fork tubes.They feature amber lenses with single or twin single-filament 12-voltbulbs (will not work with fork tins, or aluminum headlight housings).15081 Kit with single bulb lights (sold in pairs) . . . . . . . . . . . . . . . . . . . . .$79.9915082 Kit with twin bulb lights (sold in pairs) . . . . . . . . . . . . . . . . . . . . . .$82.99Replacement Parts12551 Single-filament bulbs (#168) pack of 10 . . . . . . . . . . . . . . . . . .$1.09 ea.31586 Amber lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.1431587 Red lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.14Note: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.Side ViewMarker Lights<strong>by</strong> Darrell HayesChrome 12 volt dual bulb markerlights mount to 35mm, 39mm or41mm fork tubes with integralbracket and included spacers andhardware. . . . . . . . . . . . . . . . .$92.4915083 Sold in pairsNote: Designed as supplemental lightingONLY, not to replace Original Equipmentrunning lights or turn signals.ElectricalExhaustIntakeEngineGasketsTranny& ClutchDrivelinedesign <strong>by</strong> john reedChrome Wedge Slanted Marker LightsSmooth contoured marker lights are perfect for fender strut or saddlebagmounting. Design blends well with most flat surfaces. 12-volt dual filamentkit includes amber and red lenses, hardware and gaskets. . . . . . . . . . . .$80.9927616 Sold in pairsNote: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.Strut Mount Marker Light Set for Softail ® Models<strong>by</strong> Darrell Hayes <strong>Custom</strong> ConceptsThis marker light set provides a newand unique look to the rear fenderof your bike. Made of chromeplateddie-cast aluminum andincludes both amber and redlenses. Uses twin single filamentbulbs in each light which can bewired together as turn signals,or can function as running lightsand turn signals. They may bemounted above or below the rear fender strut, and match our popularDarrell Hayes’ front marker lights (CC #15083) and our Darrell Hayesswingarm marker lights (CC #15235). Sold in pairs. . . . . . . . . . . . . . . . . . .$89.9915062 Fits all Softail ® models from 1984 to present (except Deuce models)Note: Designed as supplemental lighting ONLY, and should not be used to replace OriginalEquipment running lights or turn signals. Will not work with sissy bars and saddlebags exceptin custom applications. When used in conjunction with the Original Equipment license platebracket on FX Softail ® models, it may be necessary to modify the bracket.Wheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.61CrossReference
TMFender/Strut Marker Lights09061<strong>Lighting</strong>5Doss Wedge Marker LightsDie-cast construction, flawless chrome-plating and a unique custom look.Mount flush to flat surfaces like struts or the sides of fenders. 51/2"-long x11/4"-wide x 1"-tall.Note: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.09061 Amber twin bulb lamps (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . .$43.49Replacement Parts09064 Red lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.2909065 Amber lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.2909134 Bulbs (box of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.89 ea.Mirage ® Marker LightsOur 12-volt marker lights were designed <strong>by</strong> the styling team at <strong>Custom</strong>Chrome ® and feature die-cast construction, flawless chrome-plating and aterrific look. Single or twin bulb versions with red or amber lenses. Mountflush to flat surfaces like struts or the sides of fenders.Note: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.Marker Lights (sold in pairs)Red Amber09110 09111 Single bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.2909112 09113 Twin bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.39Replacement Parts09101 Red lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.1909104 Amber lens (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.1909134 Bulbs (box of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.89 ea.1510215101Slotted Marker LightsThis chrome marker light kit features custom ball milled slots accented witha black painted trim. Heavy duty die-cast construction looks like billet withoutthe high cost. The flush mount design is ideal for custom turn signals,marker lights or running lights on fenders, fender struts, saddlebags etc.Kits include two 12 volt marker lights and mounting hardware. They measure1" x 6". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.99330720 Amber lamps (sold in pairs)Note: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.‘Wedge’ Marker LightsChrome-plated die-cast wedge-shaped lights have single filament bulbs.They measure approx. 31/2"-long x 11/4"-wide. Sold in pairs.15101 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.4915102 Amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.4909102 Red lens ONLY (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.4909103 Amber lens ONLY (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.49Note: Designed as supplemental lighting ONLY, not to replace Original Equipment runninglights or turn signals.5.62Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Marker Lights<strong>Lighting</strong>090405Marker Light Axle Covers <strong>by</strong> Darrell HayesRedefine your bike with these chrome die cast rear axle covers. Includesintegrated marker lights for the ultimate look. Fits Softail ® models from1986 to present. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$152.6415235 Sold in setsSwingarm Marker LightsIncrease rear visibility and style with our Bob McKay-designed swingarmmarker lights and end caps. Die-cast, chrome-plated aluminum with chromehardware, 12-volt bulbs, and both amber and red lenses. They replace theOriginal Equipment rear axle adjusters and swingarm end caps. Sold in pairs.09040 Fit all Dyna Glide models from 1991 to present . . . . . . . . . . . .$59.9909041 Fit all 4-speed FL and FX models from 1973 thru 1986and all Sportster ® models from 1979 to present . . . . . . . . . . . .$80.44design <strong>by</strong> john reedSwingarm Marker Light KitAdd style and visibility. Light replaces the Original Equipment rear axleadjusters and swingarm end caps. Kit includes hardware, 12-volt bulbsand both amber and red lenses.Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $69.9929310 Fits Dyna Glide models from 1991 to presentNote: Requires drilling to run wires through swingarmLED Fender Lights <strong>by</strong> AdjureThese LED units will pop right into place in the Original Equipment holderson the front and rear fenders of most FL Softail ® and ‘Touring’ models from1980 to present. No need for a load equalizer just plug them in and rideoff. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.90634000 Red (rear) 634001 Amber (front)150981509719327Front FenderTrim LightsLightweight chrome-plated ABSlights add attractive side-mountedrunning lights. Splice into existingfender tip light wiring for anattractive installation.Sold in pairs. . . . . . . . . . . . . . . .$45.9976013 Fit 4-and 5-Speed FL, FLT,FLHT, FLHS and Road King ®models 1973 thru 20035.64Indian HeadFender LampFor a vintage look on your bikejust add our fender lamp that featuresa molded Indian Head face inthe white plastic lamp lens.Perfectly fits the curvature of mostfull front fenders used with 16"front wheels.27512 Chrome housing . . .$46.9927514 Replacementwhite lens . . . . . . . . . .$6.4919328Fender Marker LightAssemblies and LensesPrices appearing in this catalog are Suggested Retail Price and are subject to change*1509515096These marker light assemblies and lenses have been used since 1980 on thefront and rear fenders of many models. Sold each.Rear Lenses15098 Red lens with Blue Dot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.4915096 Stock replacement red lens (repl. OEM 68046-79) . . . . . . . . . . . . .$4.99Front Lenses15097 Amber lens with Blue Dot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.4915095 Stock replacement amber lens (repl. OEM 59180-80) . . . . . . . . . .$4.99Complete Assemblies19327 Front with amber lens (repl. OEM 59082-79) . . . . . . . . . . . . . . . . .$18.4919328 Rear with red lens (repl. OEM 59658-79) . . . . . . . . . . . . . . . . . . . . .$18.49
Rear Fender Marker Lights & BracketsApparelBike Kits& TrailersSeats& BagsNess-Tech ® ‘Legacy’ Turn SignalsChrome billet custom rear lighting. Single filament lightshave amber lenses (optional red lenses available). Kits fit all4-speed FL models 1974 thru 1984, FL Softail ® models from1986 to present, and all Touring models from 1991 to present(taillights not included).05663 For Ness-Tech ® billet taillights(CC #'s 05631, 05633) . . . . . . . . . . . . . . . . . . . . . . . . .$199.9505215 Amber lens (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.9405214 Red lens (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.9405216 Single filament bulb (sold each) . . . . . . . . . . . . . . . .$1.95Note: Designed as supplemental lighting ONLY, not to replace OriginalEquipment running lights or turn signals.46631FootControlsHandControls<strong>Lighting</strong>Electrical46697ExhaustIntakeEngineGasketsdesign <strong>by</strong>john reedRear Turn Signal Lightbar KitEnhance your visibility in style. This chrome unit is shorterthan-stockfor a clean look and the lights each have twosingle filament bulbs that can be used as separate turn signaland running lights or wired together as brighter turn signals.Includes a set of amber and red lenses and fits 4-speed FLmodels from 1974 thru 1984, 5-speed FL Softail ® models from1986 to present, and FLT, FLHT, FLHS and Road King ® modelsfrom 1991 to present.29313 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$135.9909134 Replacement bulbs (box of 10) . . . . . . . . . . . . . .$12.89 ea.Doss V-Style Rear Turn Signal KitSignal your intentions with this new kit from Rick Doss. The full kit comes with Magnumbullet lights and there’s also a V-style bracket that uses some Original Equipment turnsignal assemblies. A matching spotlamp mounting bar may be found on page 5.16 of thiscatalog section. Fits 4-speed FL models from 1974 thru 1984, Heritage Softail ® modelsfrom 1986 to present, and FLT, FLHT, FLHS and Road King ® models from 1991 to present.46631 Kit with Magnum bullet lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$191.0946698 Bracket only with mounts for CC #28025 Magnum lights . . . . . . . . . . . . . . . . .$143.8946697 Bracket only with adapters for various turn signals . . . . . . . . . . . . . . . . . . . . . . .$119.99Note: Even though CC #46697 fits all of the models listed above, you must use Sportster®/Dyna Glideturn signal assemblies as shown.Tranny& ClutchDrivelineWheels,Tires& BrakesChrome ‘39’ Style Marker LightsStyled after the classic good looks of 1939 Fordtaillights, these marker lights add just the righttouch to your classic ride. Front lights fit all modelswith side bolts in the triple trees. Rear lightsare attached to a chrome bracket that is held inplace <strong>by</strong> the Original Equipment taillight, and fitall models (except those with Fat Bob fendersand 1998 thru 2003 XL1200S) from 1973thru 1999.27042 Rear marker light and bracket . .$107.8927039 Front marker lights(sold in pairs) . . . . . . . . . . . . . . . . . . . .$99.99Note: Designed as supplemental lighting ONLY, not to replaceOriginal Equipment running lights or turn signals.FramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.65CrossReference
<strong>Lighting</strong>5European TÜV Marker LightsHandlebar Turn Signals andVibration Dampeners with TÜVInnovative turn signals with integral vibrationdampeners to mount into the handlebar ends.These turn signals feature a halogen lamp andthey are ECE 50.11 approved. Fits handlebarswith 12-24mm inner diameter.Sold each.85068 Chrome-plated steel . . . . . . . . . . . .$150.7985069 Satin finished stainless steel . . . . .$180.4985070 Black anodized brass . . . . . . . . . . . .$121.0985071 Satin finished aluminum . . . . . . . .$105.5985817 Black aluminum . . . . . . . . . . . . . . . .$121.69686220 Polished aluminum . . . . . . . . . . . . .$104.99686221 Polished stainless steel . . . . . . . . . .$125.19JOS Aluminum MiniTurn Signals with TÜV85808 Replacement bulb . . . . . . . . . . . . . . .$17.29Chrome ABS Mini TurnOne of the smallest turn signalsavailable with TÜV approval inEurope (60mm in diameter). Theyare sold without the stainless steelstems which are available separately,but may be mounted tothe Original Equipment stems.85174 Mini turn signal(sold in pairs) . . . . .$202.4985175 Stainless steelmounting stem ONLY(38mm x 15mm)sold each . . . . . . . . .$23.39Signals with TÜVChrome-plated ABS plastic turnsignals with 30mm mounting stem,wires and M10 thread. They are78mm long and have a diameterof only 50mm. Sold each. . .$10.4986014 Front left, rear right86015 Front right, rear left<strong>Custom</strong> Chrome ® BulletMarker Lights with TÜVChromed or black small marker lights,available in grooved and smooth versions.They come with ECE mark andamber lenses. Sold in pairs. . . . . . .$65.7987007 Smooth, chrome87008 Grooved, chrome686608 Smooth, black686609 Grooved, blackChromeBullet Lightswith TÜVThe most popular turnsignals all over the worldare now available withGerman TÜV approval.These chrome-plateddie-cast bullet lightsfeature a single filamentbulb and an amberplastic lens. Sold each.85868 Bullet lightassembly withTÜV . . . . . .$53.7985869 Replacementamber lenswith TÜVONLY . . . . .$13.99Micro Mini Turn Signals with TÜV <strong>by</strong> Kellermann ®These turn signals are designed to match with the handlebar- mounted turn signals <strong>by</strong> Kellermann ® . CC offers three different versions which are preparedto mount on plain surfaces. When mounting on slant surfaces, the additional purchase of a specially designed adaptor is required. The TÜV-approval is validonly for use as rear turn signals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$45.39Micro Mini Turn Signals Adapters Extensions (1") Extensions (1,6") Repl. Bulb (Micro Mini) Thread Extensions M8 x 40mm86815 Chrome 86818 Chrome 86822 Chrome 86825 Chrome 86828 Single bulb 686217 Chrome86816 Steel 86820 Steel 86824 Steel 86827 Steel 86829 Power resistor 686218 Steel86817 Black 86819 Black 86823 Black 86826 Black N/A 686219 BlackRBS <strong>Custom</strong> Turn Signal Sets with TÜVCNC-machined from billet aluminum and then chrome-plated or black anodized. Theseturn signals come with approved ‘E’-mark lenses, mounting studs, H4 21W bulbs andcustom fork stop kit which is necessary for models with 5.0 gallon gas tanks.Sold in sets of 4.86047 Chrome-plated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$655.8986039 Black-anodized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$655.8984855 Replacement amber TÜV lens only (sold each) . . . . .$27.095.66Prices appearing in this catalog are Suggested Retail Price and are subject to change*Handlebar Turn Signals with TÜVChrome-plated ‘Bullseye’ turn signals to mount into the endsof handlebars. Available for 7/8" (22mm) and 1" (25,4mm)handlebars. Electronic flasher relay is required.84853 For 7/8" bars (sold in pairs) . . . . . . . . . . . . . . . . . . . .$21.2984854 For 1"bars (sold in pairs . . . . . . . . . . . . . . . . . . . . . . .$21.2984860 Replacement bulb (pack of 10) . . . . . . . . . . . . . .$96.59Replacement LensesFor handlebar turn signals (CC #’s 84853 and 84854).84855 TÜV lens with ‘E’-mark (each) . . . . . . . . . . . . . . . . .$27.09
Load Equalizers & AccessoriesApparelBike Kits& TrailersSeats& BagsFootControlsRun, Brake & TurnSignal Plug-In<strong>by</strong> BadlandsA three-in-one illuminator increases visibilityfrom the rear of the motorcycle! This plug-inmodule turns stock or custom rear turn signallights into combination running and brake lightswhile maintaining their turn signal function.Compatible with the new TSM and TSSM module/securitysystem. Features include:• Built-in load equalizer• Designed for late model bikes that have thefactory security system, as well as earlier styleturn signal modules• Works with Original Equipment turn signals• Works on single filament bulbs and halogens• Runs multiple marker lights or turn signals• Includes wire connectors and simple diagrams604900 Fits Sportster ® models from 1999 thru2003, Dyna Glide and Touring modelsfrom 1997 thru 2003,and Softail ® modelsfrom 1996 thru 2003 . . . . . . . . . . . .$118.95Badlands Load Equalizer I & IILoad Equalizer IDesigned to return amperage draw to the correctfactory specifications when aftermarketmarker lights are used to replace stock turn signals.The self-cancelling Brain Box must have thecorrect draw in order to function properly. Theload equalizer can also be used in conjunctionwith a heavy duty flasher on early model bikes,when small marker lamps are being used as turnsignals. For LEDs use the Load Equalizer III. Fitsfrom 1973 thru 1999.12690 Load Equalizer I . . . . . . . . . . . . . . . . .$23.95Load Equalizer IIThe Load Equalizer II performs exactly the samefunction as the Load Equalizer with the addedfeature of allowing you to retain emergencyflasher capability , when the bike is shut off.This unit has a built-in thermister, it helps cutdown on the heat while your bike is functioningin the emergency flasher mode. For LEDs use theLoad Equalizer III. Fits from 1973 thru 1999.36924 Load Equalizer II . . . . . . . . . . . . . . . . .$32.95Badlands Load Equalizer III• Fits all models equipped with the TSSM security/alarmmodule or the TSM turn signalmodule from 1991 to present• Must be used on all Harley-Davidson ® modelsfrom 2000 to present!• Works flawlessly with the new generation ofHarley-Davidson modules and is compatiblewith most of the custom turn signals available,including (tiny) wedge bulbs and LEDs• If you have a security key icon that is notfunctioning correctly (stays on all the time) oryour turn signals blink erratically, this modulewill solve any related problem• This new module produces absolutely no heatand is also intended for the 1991 thru 1999H-D ® standard turn signal modules• Will run emergency flashers for any amountof time and is designed for parade use• American-made with quality components699997 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$69.95HandControls<strong>Lighting</strong>ElectricalExhaustIntakeEngineGasketsTranny& ClutchDrivelineIlluminator Pro Module<strong>by</strong> BadlandsThis module is a custom bike builder's dream.All of the latest technology is built into this onemodule!• Recommended for stock models from 1973thru 1990• Works great on custom bikes without selfcancellingfeatures• 11 second time flashing that automaticallycancels• Solid state built-in flasher• Manually cancel at any time for quick lanechanges• Built-in load equalizer runs LED’s up to100 watts per side• Front run and turn on single filament bulbsor LED’s/rear-run, brake and turn• Emergency flasher mode• Comes with easy to follow instructionsand connectors604904 Illuminator Pro . . . . . . . . . . . . . . . . .$118.95Badlands “The Illuminator”Run, Brake and Turn Module• Triples your visibility in the rear• Install a pair of red lens and your bike has 3running lights. Hit your brake and you have 3brake lights. Touch your turn signal button,and you maintain your turn signal functionwhile the other side remains a running light,or if you are braking, a brake light• Built-in load equalizer• Runs your stock OEM turn signals• Runs custom turn signals , Halogen and LEDStoo• Easy to follow instructions and connectorsincluded• Made in the USA with quality components• Fits all models from 1965 thru 1995 as well asSportster models from 1996 thru 1998, and1996 Dyna Glide and Touring models (newermodels use “Plug-In” version, CC #604900,for convenience)36944 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$99.95Badlands Automatic Turn SignalShut Off Module III• Gives any Harley-Davidson ® or custom builtmotorcycle without the 1991 and up self canceller,the same similar convenient features• Also will work well on custom manufacturedmotorcycles without the cancelling feature• 9 second timed flashing that automaticallycancels or can be manually cancelled at anytime (quick lane change)• Has a built-in solid state flasher and emergencyflasher mode• Built-in load equalizer runs LEDS up to 100watts per side• Measures 27/8"-long x 13/8"-wide x 7/8"-deep• Includes wire connectors and simple wiringdiagrams for stock OEM wiring, and custombike wiring• American-made with quality components12675 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$88.99Wheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.67CrossReference
Turn Signal Modules604901<strong>Lighting</strong>755675Self-Cancelling Turn Signal Module <strong>by</strong> BadlandsThis unique module will give any Harley ® that is not equipped with the selfcanceller, similar convenient features. Can be used with custom speedometerson late-model bikes. Includes simple wiring diagrams for stock OEMwiring, as well as custom wiring and also will work well on custom manufacturedmotorcycles. Features include:• Flashing automatically cancels after 9 seconds• Can be manually cancelled at any time• Solid state flasher has built-in emergency flasher mode• Runs bulbs or LEDs• Measures 27/8"-long, 13/8"-wide, 7/8"-deep• Includes wire connectors and simple diagrams604901 Amp style 10 pin plug for modelsfrom 1987 thru 1993 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$83.95604902 Deutsche 8 pin plug for modelsfrom 1994 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$94.95604903 Deutsche 12 pin plug for modelsfrom 1994 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$94.9575566Self-Cancelling Turn SignalModulesThese are Original Equipment items. Excellentfor stock replacement or custom projects.$134.9975567 Replaces OEM 68540-9675566 Replaces OEM 68537-83G<strong>Custom</strong> Chrome ® Turn SignalLoad EqualizerVery small designed load equalizer exclusivelyfor <strong>Custom</strong> Chrome ® . . . . . . . . . . . . . . . . . . . . .$19.95686596 Sold eachCircuit Breaker ClipsReproductions of the stock zinc-plated parts.Includes aluminum rivet. Used many applicationsto hold the turn signal flasher unit and thecircuit breaker. . . . . . . . . . . . . . . . . . . . . . . . . . .$1.62 ea.19295 Replaces OEM 9952 (sold on a card of 10)Back-OFF Brake Light ModuleHelp those zoned-out drivers see you better.This compact solid-state electronic device convertsan ordinary brake light into a high attention-grabbingalert signal when you are stoppedor are stopping. When you apply your brakes,Back-OFF will automatically flash your brakelight three times, then hold it steady for 31/2 seconds.This signal is repeated as long as thebrakes are applied. This pattern is not random,it was selected for its ability to keep the attentionof the drivers behind you. Installs in minuteswith two connections. Made in the USA.330592 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$41.995.68Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Miscellaneous <strong>Lighting</strong>ApparelBike Kits& TrailersSeats& Bags<strong>Custom</strong> Taillight Lenses<strong>by</strong> Motor City CycleAdd a cool touch with these customdesigned taillight lenses.• Available in a Skull, Flameor Maltese Cross design• Feature clear lenses on top toilluminate the license plate• Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99Fit most Models with Built-In Reflector (except Deuce Models)from 1999 to Present623509 Skull lens623510 Flame lens623511 Maltese Cross lensFit most Models from 1973 thru 1998623512 Skull lens623513 Flame lens623514 Maltese Cross lens<strong>Custom</strong> Turn Signal Lenses <strong>by</strong> Motor City Cycle• Easy to install• Fits with visors on rear turn signals• Also fits front turn signals• Generates better side visibility for safety• Turn signal lenses available in red or amber• Sold in pairsFits most Sportster ® , Dyna Glide, FXR, Fat Boy ® , Night Train ® ,Springer Softail ® , FLST and FLSTS Models from 1986 thru 2001Part # Turn Signals Design Color623501 Rear Skull Red . . . . . . . . . . .$49.99623503 Rear Maltese Red . . . . . . . . . . .$49.99623504 Rear Skull Amber . . . . . . . .$49.99623506 Front Skull Amber . . . . . . . .$49.99623508 Front or Rear Maltese Amber . . . . . . . .$49.99Fit most Heritage Softail ® , Road King ® , Road Glide ® , Tour Glide ®and Electra Glide ® Models from 1986 to PresentPart # Turn Signals Design Color623500 Rear Skull Red . . . . . . . . . . .$49.99623502 Rear Maltese Red . . . . . . . . . . .$49.99623505 Front Skull Amber . . . . . . . .$49.99623507 Front or rear Maltese Amber . . . . . . . .$49.99Note: On Road Glide® models and bikes with horizontal front turn signals, use rear style signalson front, except on Flames.FootControlsHandControls<strong>Lighting</strong>ElectricalExhaustIntakeEnginePurple‘Sine Waves’ <strong>by</strong> Glow JobWant your ride to be noticed and stand out in the crowd?Dr. Neon’s ‘Sine Waves’ is just want you’ve been looking for!These spark plug wires come in a variety of colors that createan intense neon glow on your motor. Include hi-performanceblack wire, chrome mounting bracket and allinstallation hardware. Fit all fuel injection, and High EnergyIgnition (HEI) coil systems.Sold in pairs.609206 Yellow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95609207 Green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95609208 Orange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95609209 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95609210 Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95690211 Purple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95GasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.69CrossReference
<strong>Lighting</strong>5Blue Dot Lenses & Trim129591296412967129621296112965Note: Installation of these accessories may be in violationof FMVSS Standard #108.1296612963129690969512968Blue Dot Lenses and Grill KitsTop-quality plastic lenses with plastic blue dots inchrome mounting rings.12961 Jewel and mounting ring only(sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . .$7.99Taillight Lenses12962 Fits all models from 1973 thru 1998as well as 1999 Softail ® models(except FLSTS models) . . . . . . . . . . . . . . .$15.4912965 Tombstone lens for all modelsfrom 1947 thru 1954 . . . . . . . . . . . . . . . . . .$9.4912966 Fits all models from 1955 thru 1972 . . . .$9.4912959 Lucas lens to fit CC #19647 taillight . . . .$9.4912968 Cateye lens (includes mounting gasket)to fit CC #19762 Cateye taillight . . . . . .$10.9919903 Lens for CC #’s 19900 and 19907Fat Bob taillight kits (not shown) . . . . .$16.99Taillight Lens and Grill Kits09695 Fits all models from 1973 thru 1998 as wellas 1999 Softail ® models (except FLSTS andmodels with Fat Bob fenders) . . . . . . . .$25.94Turn Signal LensesSold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.9912963 Fit all Sportster ® , FX and FXR modelsfrom 1973 thru 1985 and 5-speed FLTand FLHT models from 1980 thru 198512964 Fit all 4-speed FL or 5-speed FLT, FLHTand FLHS models from 1963 thru 198512967 Fit all Sportster ® , FXR, Dyna Glide andFX Softail ® models from 1986 thru 2001(except Deuce models)12969 Fit all FLT, FLHT, FLHS, Road King ® and mostFL Softail ® models from 1986 to present26681096952668209700Wiring Harness Pins and SocketsReplacements for the Original Equipment parts used in manyapplications since 1971. Sold in packs of 10. . .$3.2926681 Pins (repl. OEM 72039-71)26682 Sockets (repl. OEM 72038-71)Premium Hazard FlasherStock replacement hazard lightflasher unit for all models (except1989 thru 1990 Touring models)from 1965 thru 1990. . . . . . . .$4.9925205 Replaces OEM 68541-64A09699Trim Rings and Taillight GrillsFashioned after the chevrons found on the rear fender of many older models.Two taillight lens kits are also available which include a taillight lens, aspecial taillight grill and a blue dot.Note: Installation of these accessories may be in violation of FMVSS Standard #108.Chevron Style Taillight Grills09699 Fits all models from 1973 thru 1998 as well as 1999 Softail ®models (except FLSTS and models with Fat Bob fenders) . . . .$14.84Blue Dot Grill Kits09695 Fits all models from 1973 thru 1998 as well as 1999 Softail ®models (except FLSTS and models with Fat Bob fenders) . . . .$25.94Trim Rings09700 Fits all models from 1973 thru 1998 as well as 1999Softail ® models (except FLSTS models) . . . . . . . . . . . . . . . . . . . . . .$15.495.70Prices appearing in this catalog are Suggested Retail Price and are subject to change*
LensesApparel1512215121Bike Kits& TrailersSeats& Bags1512315124FootControlsHandControlsAmber Turn Signal Lenses with Blue DotsTop-quality plastic lenses with the plastic blue dots centered and securelyheld in place <strong>by</strong> chrome mounting rings. Sold in pairs. . . . . . . . . . . . . .$16.9915122 Fit all Sportster ® , FX and FXR models from 1973 thru 1985and 5-speed FLT and FLHT models from 1980 thru 198515121 Fit all Sportster ® , FXR, Dyna Glide and FX Softail ® modelsfrom 1986 thru 2001 (except Deuce models)15124 Fit all 4-speed FL or 5-speed FLT, FLHT and FLHS modelsfrom 1963 thru 198515123 Fit all FLT, FLHT, FLHS, Road King ® and most FL Softail ® modelsfrom 1986 to present12961 Jewels and mounting rings only . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99Note: Installation of these accessories may be in violation of FMVSS Standard #108.Bullet ShapedTurn Signal LensesFor an instant custom lens look,all you need is a screwdriver.Built to D.O.T. specifications.Sold in pairs. . . . . . . . . . . . . .$31.99Amber Red149951499214992 14991 Fit all Sportster ® , FXR, Dyna Glide and FX Softail ® modelsfrom 1986 thru 2001 (except Deuce models)14994 n/a Fit all FLT, FLHT, FLHS, Road King ® and most FL Softail ®models from 1986 thru 199914996 14995 Fit all 4-speed FL or 5-speed FLT, FLHT and FLHS modelsfrom 1963 thru 1985<strong>Lighting</strong>ElectricalExhaustIntakeEngine22221 22967 2222322969 22224 2296322964 2222222962Jeweled Blue Dot Lenses<strong>by</strong> Chris ProductsTop-quality plastic lenses with plastic blue dots inchrome mounting rings. Made in the USA.22961 Jewel and mounting ring ONLY(sold in pairs) . . . . . . . . . . . . . . . . . . . . .$2.99Taillight Lens22962 Fits all models from 1973 thru 1998as well as 1999 Softail ® models(except FLSTS models) . . . . . . . . . . .$10.89Turn Signal LensesSold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.89Amber Red22223 22969 Fit all FLT, FLHT, FLHS, RoadKing ® and most FL Softail ®models from 1986 to present22221 22967 Fit all Sportster ® , FXR, Dyna Glideand FX Softail ® models from 1986thru 2001 (except Deuce models)22222 22963 Fit all Sportster ® , FX and FXRmodels from 1973 thru 1985and 5-speed FLT and FLHT modelsfrom 1980 thru 198522224 22964 Fit all 4-speed FL or 5-speed FLT,FLHT and FLHS modelsfrom 1963 thru 1985Note: Installation of these accessories may be in violation ofFMVSS Standard #108.GasketsTranny& ClutchDrivelineWheels,Tires& BrakesFramesForks& ShocksSheetmetalGeneralFor the Dealer Nearest You, Call: 800-729-33325.71CrossReference
Radiantz LED Light KitsRadiantz L.E.D. KitsGet the LED out and dress-up your bike <strong>by</strong> adding these awesome Radiantzlighting kits! The wide selection includes everything from taillights to turnsignals providing the perfect way to make your bike stand out in a crowd.6137061388<strong>Lighting</strong>561371613726137361374L.E.D. Strip KitsWater-resistant, and can be cut to any size. The housings use double-sided 3Mtape, perfect for custom bikes. The red and amber kits have 1mm space betweenthe L.E.D.’s and the green, blue and white strips have 1/2" spacing. The lightedportion of the strips is 12"-long. Sold each.61370 Red . . . . . . . . . . . . . . .$113.69 61373 Blue . . . . . . . . . . . . . . .$106.7961371 Amber . . . . . . . . . . . . .$113.69 61374 White . . . . . . . . . . . . .$106.7961372 Green . . . . . . . . . . . . .$106.79 61397 Diode (see below) . . .$15.3961387Add-On License Plate LightsChrome billet lights bolt onto vertically and horizontally-mountedlicense plates. Available in 3" or 6"-long white L.E.D. kits.Sold each.61387 3"-long kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$78.1961388 6"-long kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$83.5961361 6136261380Super-Bright ‘Tombstone’ L.E.D. KitsConsists of a red running light and brake light.Wiring required.Fit ‘Tombstone’ Taillights (CC #’s 19644 and 19660)61379 Without turn signals . . . . . . . . . . . .$133.1961385 With turn signals . . . . . . . . . . . . . . .$146.99Fit Doss ‘Tombstone’ Taillights (CC #’s 46400 and 46409)61380 Without turn signals . . . . . . . . . . . .$146.9961386 With turn signals . . . . . . . . . . . . . . .$155.19Super-Bright L.E.D. Kitsfor Original Equipment TaillightsConsists of a red running light and brake light,and fits in your existing Original Equipmentor aftermarket lens and bucket. No wiringrequired, just plug it in.Kits without Turn Signals61376 Fits all models from 1973 thru 1998and 1999 Softail ® models . . . . . . .$146.9961377 Fits all models from 1999 to present(except 1999 Softail ® and 2000-upDeuce and V-Rod ® models) . . . . .$146.99Kits with Turn Signals61382 Fits all models from 1973 thru 1998and 1999 Softail ® models . . . . . . . .$155.1961383 Fits all models from 1999 to present(except 1999 Softail ® and 2000-upDeuce and V-Rod ® models) . . . . .$155.19Flexible L.E.D Strip KitsThe housings utilize double-sided 3M tape, perfectfor custom bikes, and have 1mm spacingbetween L.E.D.’s in addition to being waterresistant.These strips cannot be cut.61367 Amber 13/4"-long strips(sold in pairs) . . . . . . . . . . . . . . . . . . . .$37.6961368 Red 13/4"-long strips(sold in pairs) . . . . . . . . . . . . . . . . . . . .$37.6961369 Red 6"-long strip (shown)sold each . . . . . . . . . . . . . . . . . . . . . . . .$60.9961397 Conversion diode – permits CC #’s 61369,61370 (above) to work as a runninglight and a brake light . . . . . . . . . .$15.39Super-Bright L.E.D. Kits for Extra-Wide<strong>Custom</strong> Fat Bob TaillightsConsists of a red running light and brake light,and fits in the existing lens and bucket(CC #’s 19900, 65474). Just plug it in.61378 Without turn signals . . . . . . . . . . . .$160.3961384 With turn signals . . . . . . . . . . . . . . .$170.89Super-Bright ‘Cat Eye’ L.E.D. KitsConsists of a red running light and brake light,and fits in the existing lens and bucket(CC #19762). Wiring required.61375 Without turn signals . . . . . . . . . . . .$133.1961381 With turn signals . . . . . . . . . . . . . . .$146.996136561365Turn Signal Bulbs for Softail ® , Sportster ® ,FXR and Dyna Glide ModelsL.E.D. bulbs fit all Deuce models from 2000to present, and all models (except FLT, FLHT,Road King ® , V-Rod ® and FL Softail ® models)from 2002 to present. Sold in pairs. . . . . .$106.79Single Filament L.E.D. Dual Filament L.E.D.61361 Red 61393 Red61362 Amber 61394 AmberL.E.D. bulbs fit all models from 1986 thru 2001(except FLT, FLHT, FLHS, Road King ® , 2001 FXDXand FXDXT models, FL Softail ® and Deuce models). Sold in pairs . . . . . . . . . . . . . . . . . . .$106.79Single Filament L.E.D. Dual Filament L.E.D.61365 Red 61391 Red61366 Amber 61392 AmberNote: Dual filament bulbs may require re-wiring on somemodels.Turn Signal Bulbs for ‘Touring’ ModelsL.E.D. bulbs fit all FLT, FLHT, FLHS, Road King ®and FL Softail ® models from 1986 to present.Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$106.79Single Filament L.E.D. Dual Filament L.E.D.61363 Red 61389 Red61364 Amber 61390 AmberDual Element Conversion DiodeThis diode will permit CC #’s 61369 and 61370to work as a running light and a brake light.61397 Sold each (not shown) . . . . . . . .$15.395.72Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Double Brite Amber LEDBox <strong>by</strong> Paul YaffeOriginalsThese super bright amber LEDs producetwice the amount of light foundin standard LED displays. They haveamber LEDs and clear lenses. Housingsare fully sealed and drilled at the endsto offer bolt on installation and versatilityfor custom designs. Feature athree wire harness that permits manywiring applications and lighting configurations.Made in the USA.47679 Amber 41/2" . . . . . . . . . .$124.9947681 Amber 61/4" . . . . . . . . . .$154.9947683 Amber 81/4" . . . . . . . . . .$179.99Note: Designed as supplemental lighting ONLY,not to replace Original Equipment runninglights, brake lights or turn signals.23580Glow-Job Neon Tube Light Kits• Neon tube sets can be placed on your bike to give off a noticeable glowon either the frame rails, spark plugs or under your gas tank• Sets come in different shapes, colors and designs• Spark plug sets will not produce power loss even on high-performanceignition systems• Feature a lifetime warranty against defects in materials or workmanshipNeon Tank and Frame KitsMount under your tank or on your frame rails.Neon ‘Double Tube’ Kits (sets of two)23580 Purple . . . . . . . . . . . . .$219.9923581 Blue . . . . . . . . . . . . . . .$219.9923582 Red . . . . . . . . . . . . . . . .$219.99Neon ‘Triple Tube’ Kits (sets of three)23583 Purple . . . . . . . . . . . . .$326.9923584 Blue . . . . . . . . . . . . . . .$326.9923585 Red . . . . . . . . . . . . . . . .$326.99LED Lights & Kits‘Lazer Fusion’ Module Kits <strong>by</strong> Glow-Job These intensely bright ‘Lazer Fusion’ modules are 100 times brighter thansuper bright LED’s. They glow and shine so that they are a perfect companionto other neon kits. They’re designed to fit where neon tubes can’t, suchas front and rear wheels, behind the horn, small air cleaners and in verytight places. There is no limit to how many you can put on a bike. They canall wire to the same switch if need be and are economic to use. They havea diode and resistor built-in so you can’t hook them up backwards, toggleswitch and all necessary installation hardware. Sold in a pack of 4 or soldeach. The Lazer Fusion ‘Expansion Module’ includes one Lazer Fusion moduleONLY (does come with toggle switch). Measures 11/16" x 11/16" x 3/8".Comes with manufacturer's lifetime warranty.Color Sold Each Pack of 4 Expansion ModuleRed 609190 $39.95 609195 $109.95 609221 $29.95Blue 609191 $39.95 609196 $109.95 609222 $29.95Purple 609192 $39.95 609197 $109.95 609223 $29.95Green 609193 $39.95 609198 $109.95 609224 $29.95Amber 609194 $39.95 609199 $109.95 609225 $29.95ApparelBike Kits& TrailersSeats& BagsFootControlsHandControls<strong>Lighting</strong>ElectricalExhaustIntakeEngine04941Gaskets04938LED LightstripsPerfect for building custom lights. Super-brightassemblies are complete with 90" wire leads.09724 12 bulbs (4"-long) . . . . . . . . . . . . . . .$35.49Tranny& ClutchCateyeHorizontalDrivelineCateye AngledWheels,Tires& BrakesFrames<strong>Custom</strong> Radial<strong>Custom</strong> Racetrack<strong>Custom</strong> HorizontalLED Upgrade Kits for Ness-Tech ® TaillightsThese kits were designed for convenient and easy upgrading of our Ness-Tech ® standard taillights.They consist of pre-wired LED arrays that replace the conventional bulbs and sockets in the Ness-Tech ® housings.04938 LED upgrade kit for Ness-Tech ® Cateye Horizontal taillights . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.9504939 LED upgrade kit for Ness-Tech ® Cateye Angled slot taillights . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.9504940 LED upgrade kit for Ness-Tech ® <strong>Custom</strong> Horizontal taillight . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.9504941 LED upgrade kit for Ness-Tech ® <strong>Custom</strong> Racetrack taillight . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.9504942 LED upgrade kit for Ness-Tech ® <strong>Custom</strong> Radial taillight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.95Note: Installation of these accessories may be in violationof FMVSS Standard #108.For the Dealer Nearest You, Call: 800-729-3332L.E.D. Stoplight/Taillight Bulb<strong>by</strong> Candlepower ®From one of the most trusted names in lightingcomes this unique bulb that replaces any 1157bulb. When the taillight is in service, the LED’srotate and reverse direction every two seconds.When the brake light is activated, the LED’spulse more than two times per second. The bulbis also brighter, but draws less power than aconventional bulb and will last longer. . . .$34.9915178 Sold eachNote: For off-road and show use ONLY.5.73Forks& ShocksSheetmetalGeneralCrossReference
<strong>Lighting</strong>5Replacement BulbsReplacement BulbsILLUS. Part # PACK QTY. CLASS ANSI # VOLTS WATTS AMPS C/P CONTACT NOTES#1 12521 Box of 10 S-8 1154 6 – 2.63 21/3 D.C. Index repl. OEM 68165-47#1 12522 Box of 10 S-8 198/1157 12 – 2.25 32/3 D.C. Index repl. OEM 68168-89#1 12515 Card of 20 S-8 198/1157 12 – 2.25 32/3 D.C. Index repl. OEM 68168-89#1 15199 Box of 10 S-8 1157NA 12 – 2.25 32/3 D.C. Index Amber#1 15184 Box of 10 S-8 1157R 12 – 2.25 32/3 D.C. Index Red#1 15141 Box of 10 S-8 1157R 12 – 2.25 50/14 D.C. Index Red Super Bulb#1 12530 Sold each S-8 1034/1157 12 – 2.25 50/14 D.C. Index Super Bulb#1 12531 Box of 10 S-8 1034/1157 12 – 2.25 50/14 D.C. Index Super Bulb#2 19098 Box of 10 S-8 – 12 23/8 – – D.C. Bay#3 12547 Box of 10 S-8 199/1156 12 – 2.25 32 S.C. Bay repl. OEM 68572-64B#3 15198 Box of 10 S-8 1156NA 12 – 2.25 32 S.C. Bay Amber#4 12523 Box of 10 G-6 – 12 – 2.25 32/3 D.C. Index#4 31590 Box of 10 G-6 – 12 – – 21/6 D.C. Index#4 330269 Box of 10 – – 12 20/5 – – D.C. Index Dual filament#5 15114 Box of 10 G-6 – 12 – 2.25 32 S.C. Bay#5 27999 Box of 10 G-6 – 12 23 – – S.C. Bay#6 09134 Box of 10 T-31/4 192 12 – .33 3 Wedge-2#6 12551 Box of 10 T-31/4 168 12 – .35 3 Wedge-2#6 12552 Box of 10 T-31/4 161 12 – .19 1 Wedge-2#7 12520 Box of 10 G-31/2 53 12 – .12 1 Mini Bay High-beam indicator#8 27823 Box of 10 – – 12 3 – – S.C. Bay#9 27824 Box of 10 – – 12 3 – – Push-In#9 75264 Sold each – – 12 – – – Push-In dash indicatorrepl. OEM 68024-94#10 12544 Sold each RP-11 – 6 25/25 – – D.C. Prefocus repl. OEM 67750-35#10 12543 Sold each RP-11 – 12 35/35 – – D.C. Prefocus#11 12476 Sold each RP-11 – 6 25 – – S.C. Prefocus repl. OEM 68715-49#11 12477 Sold each RP-11 – 12 35 – – S.C. Prefocus repl. OEM 68715-64#12 12527 Sold each – H-4 12 60/55 – – 3-Lug repl. OEM 67697-81T#12 15112 Sold each – H-4 12 60/55 – – 3-Lug Rainbow#12 12529 Sold each – H-4 12 100/55 – – 3-Lug 100-watt high beam#13 26368 Sold each – – 12 – – – Two Wire repl. OEM 68574-86#13 26369 Sold each – – 12 – – – Two Wire repl. OEM 68489-86#13 26370 Sold each – – 12 – – – Two Wire repl. OEM 67864-86#13 26371 Sold each – – 12 – – – Two Wire repl. OEM 67862-86Red Taillight and Turn Signal BulbsStandard BulbRed-coated light bulb is ideal for use with clear lenses.12-volt dual element bulb replaces 1157R. . . . . .$37.99 ea.15184 Box of 10Super High-Intensity BulbThis red-coated light bulb is recommended for use withour clear lenses. The 12-volt dual element bulb is ratedat 50/14 candlepower instead of the standard 32/3candlepower and replaces an 1157R. . . . . . . . . . .$59.99 ea.15141 Box of 10Super BulbHigh intensity stop and taillightbulb has nearly 100% greater illumination.Long life and vibrationresistance from triple-wound doublefilament. 12-volt. Replaces #’s1034 and 1157.12530 Sold each . . . . . . . . .$6.4912531 Pack of 10 . . . . . . . .$59.99Note: May be unsuitable for installationswith limited clearance with plastic lenses.5.74Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Replacement BulbsApparelBike Kits& TrailersSeats& BagsDouble Contact1 Bayonet Candelabra Index2Double ContactBayonet CandelabraFootControlsHandControls<strong>Lighting</strong>Single Contact3 Bayonet Candelabra4Double ContactBayonet Candelabra IndexElectricalExhaustIntake5Single ContactBayonet CandelabraWedge-26 7Miniature BayonetEngineGasketsTranny& ClutchDrivelineSingle ContactPush-in8 Bayonet Candelabra 9 10Double ContactCandelabra PrefocusWheels,Tires& BrakesFramesForks& ShocksSheetmetalSingle Contact11 Candelabra Prefocus12 3-Lug132-WireGeneralFor the Dealer Nearest You, Call: 800-729-33325.75CrossReference
Sealed Beams & Bulbs<strong>Lighting</strong>16 17514 1518 19Replacement Sealed BeamsILLUS. Part # PACK QTY. CLASS ANSI # VOLTS WATTS CANDLEPOWER CONTACT NOTES#14 15089 Sold each PAR-56 6006 6 50/40 27,000/20,000 3-Lug repl. OEM 67717-48B#14 15090 Sold each PAR-56 6014 12 60/50 32,000/25,000 3-Lug repl. OEM 67717-64#14 26420 Sold each PAR-56 H6024 12 65/40 35,000/27,000 3-Lug H-4/Halogen#15 12507 Sold each PAR-46 4020 6 30/30 25,000/15,000 3-Lug repl. OEM 67717-59#15 12508 Sold each PAR-46 4467 12 50/35 23,000/10,000 3-Lug repl. OEM 67717-65A#15 26425 Sold each PAR-46 H4467 12 50/35 27,000/12,500 3-Lug H-4/repl. OEM 67698-81A#16 26400 Sold each PAR-36 4456 12 30/30 10,000/5,000 3-Lug Hi-Lo Beam#17 12482 Sold each PAR-36 4415A 12 35 7,000 Screw Amber#17 12524 Sold each PAR-36 4449 12 30 22,000 Screw repl. OEM 68674-69#18 12484 Sold each PAR-36 4416A 12 30 25,000 Screw Amber#18 12590 Sold each PAR-36 4416 12 30 35,000 Screw#19 15085 Sold each PAR-36 H7616 12 37.5 70,000 Screw H-4/Halogen#19 15086 Sold each PAR-36 H7604 12 50 110,000 Screw H-4/HalogenReplacement BulbsReplacement 12-volt bulbs for taillights, turn signals, marker lights and accessory lamps.Part# Watts Application Filament Notes QTY. Price84856 21 Taillights single spherical 10 . . . . .$57.9984860 18 Handlebar turn signals single spherical bulb 10 . . . . .$96.5984863 10 Ness ® taillights single fuse type 10 . . . . .$41.2984970 5 Taillights single spherical 10 . . . . .$20.1985808 21 Kellermann turn signals single Halogen 1 . . . . .$17.2985815 – Pro-One marker lights single w/socket & wire 1 . . . . .$10.4985968 10 TÜV approved bullet lights single 10 . . . . .$26.4986062 1.2 German 48/60mm gauges single w/socket & wire 1 . . . . . .$4.995.76Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Change language