Serial Atmel ISP programmer works with AVR Studio 4
Serial Atmel ISP programmer works with AVR Studio 4
Serial Atmel ISP programmer works with AVR Studio 4
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Serial</strong> <strong>Atmel</strong> <strong>ISP</strong> <strong>programmer</strong><strong>works</strong> <strong>with</strong> <strong>AVR</strong> <strong>Studio</strong> 4Supported Microcontrollers:AT90S1200AT90S2313AT90S2323AT90S2333AT90S2343AT90S4414AT90S4433AT90S4434AT90S8515AT90S8535ATtiny12ATtiny15ATtiny19ATtiny26ATmega8ATmega8 BOOTATmega16ATmega16 BOOTATmega32ATmega32 BOOTATmega8515ATmega8515 BOOTATmega103ATmega603ATmega128ATmega128 BOOTATmega161ATmega161 BOOTATmega163ATmega83ATmega163 BOOTATmega83 BOOTATmega8535ATmega8535 BOOT10 pin <strong>ISP</strong> connector:(c) Sigma-Shop.com All rights reserved.
This <strong>programmer</strong> <strong>works</strong> <strong>with</strong> <strong>AVR</strong> <strong>Studio</strong> 4 - <strong>AVR</strong>prog.Menu > Tools > <strong>AVR</strong>prog :(c) Sigma-Shop.com All rights reserved.
In order to use an <strong>ISP</strong> <strong>programmer</strong>, the target device must be powered andhave a oscillator, as the <strong>programmer</strong> has to communicate <strong>with</strong> the targetdevice under standard operating conditions rather than a specific programmingmode.Wire connections must be made between the <strong>ISP</strong> <strong>programmer</strong> and the targetdevice for the pins SCK MOSI MOSO RST GND and VCC.Exemplary scheme <strong>with</strong> <strong>ISP</strong> connector and pinouts for ATmega16 :(c) Sigma-Shop.com All rights reserved.