06-B50 TECHNICAL MANUAL-ENGINEERING CPY-2009 - REED

More documents

Recommendations

Info

REED MODEL: B50TRAILER CONCRETE PUMPOPER.PAGE 0719. VOLUME CONTROLThis control is installed adjacent to the main panel, just forward of the hydraulic tank.It is used to adjust volume output of the material cylinders which in turn is controlledby the output of the hydraulic pump. Turning knob COUNTERCLOCKWISE willINCREASE volume, turning knob CLOCKWISE will DECREASE volume.DO NOT VARY THE PUMP OUTPUT BY VARYINGENGINE SPEED.20. AGITATOR CONTROLThe agitator or remixer function is controlled by a manually operated single spooldirectional control valve. The valve is used to control ON-OFF function as wellas the rotation direction of the hydraulic motor. With lever in CENTER position, thehydraulic flow to the motor is OFF.REVISION:
REED MODEL: B50TRAILER CONCRETE PUMPOPER.PAGE 0821. OUTRIGGER CONTROLAs part of the same valve bank as the agitator, the two (2) additional valve sectionsare used to control the outriggers. One lever controls the right outrigger; the othercontrols the left outrigger. Lever in CENTER position, the flow is OFF.22. WATER PUMP CONTROL – OPTIONThis option is operated from the auxiliary circuit. It utilizes a single spool manualdirectional valve to control the operation of the hydraulic motor. The motor is used todrive the water pump.WATER PUMPHYDRAULIC MOTORREVISION:
Page 1 and 2: REED MODEL: B50TRAILER CONCRETE PUM
Page 7: REED MODEL: B50TRAILER CONCRETE PUM
Page 11: REED MODEL: B50TRAILER CONCRETE PUM
Page 58 and 59:
REED MODEL: B50TRAILER CONCRETE PUM
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82:
show all

06-B50 TECHNICAL MANUAL-ENGINEERING CPY-2009 - REED

Create successful ePaper yourself

Delete template?

Save as template?