Zero-P. Zero profile anterior cervical interbody fusion (ACIF) device.

More documents

Recommendations

Info

$Locking Attachment Plate. For treatment of periprosthetic fractures.$

$LCP Distal Ulna Plate. For capital and subcapital fractures of the ulna.$

Screw FixationOption A: Aiming DeviceThe aiming device allows one screw to be inserted with the instrumentattached to the implant. This helps to keep the implantin place while the other screw holes are prepared and screws inserted.A1Drill first pilot hole through drill and screw hole ofaiming device40° 5°2.5° 2.5°Instruments03.617.963 Aiming Device03.617.912 Drill Bit 2.0 mm, drilling depth 12 mm,3-flute, for Quick Coupling03.617.914 Drill Bit 2.0 mm, drilling depth 14 mm,3-flute, for Quick Coupling03.617.916 Drill Bit 2.0 mm, drilling depth 16 mm,3-flute, for Quick Coupling03.617.903 Handle with Quick Coupling40° 5°2.5° 2.5°Select a drill bit of appropriate length. Insert the drill bit intothe drill and screw hole of the aiming device and drill untilthe stop on the drill bit contacts the guide. Intraoperative imagingshould be used to verify drill position.Remove drill bit.Note: The drill bits are marked with a colored ring correspondingto the color-coded screw lengths.Caution: When using the drill bit in combination with theaiming device, take care to apply only axial forces to the drillbit. Bending forces applied when the tip of the drill bit is engagedin the aiming device can lead to the drill bit breaking.12 Synthes Zero-P Technique Guide
A2Insert first screwInstruments03.617.902 Screwdriver Shaft Stardrive, T8,self-holding03.617.903 Handle with Quick CouplingOptional instrument03.617.901 Holding Sleeve for ScrewsSelect the appropriate screw length according to the preoperativeplanning and intraoperative findings.Load a screw onto the screwdriver. The screw will self-retainto the screwdriver, however, for increased screw retentionthe holding sleeve may be used.Advance the screw until the head of the screw contacts theplate.Intraoperative imaging should be used to verify screw position.Caution: The screws should be tightened only after allscrews have been inserted.Synthes 13
Page 1: Technique GuideZero-P. Zero profile
Page 4 and 5: Zero-P. Zero profile anterior cervi
Page 6 and 7: Stability similar to that of anante
Page 8 and 9: Indications and ContraindicationsTh
Page 10 and 11: Implant Insertion1ApproachUsing the
Page 12 and 13: Implant Insertion3Pack implant with
Page 16 and 17: Screw FixationOption A: Aiming Devi
Page 18 and 19: Screw FixationOption A: Aiming Devi
Page 20 and 21: Screw FixationOption B: Drill Guide
Page 22 and 23: Screw FixationOption C: Awl and Fre
Page 24 and 25: Screw FixationOption C: Awl and Fre
Page 26 and 27: Screw FixationOption D: Angled Inst
Page 28 and 29: ImplantsZero-P Spacers- Supplied st
Page 30 and 31: Instruments03.617.720-729 Zero-P Tr
Page 32 and 33: Instruments03.110.002 Torque Limite
Page 34 and 35: Screwdriver Stardrive ® , T8, self
Page 36 and 37: Handle with Quick Coupling 03.617.9
Page 38: Bibliography1. Bazaz R, Lee MJ, Yoo

Zero-P. Zero profile anterior cervical interbody fusion (ACIF) device.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?