Topocad modules functionality overview - Adtollo

Overview Topocad functionality indifferent modulesTopocad readerTopocad reader PLUSTopocad Site EngineerTopocad BaseDrawingLayer manager Yes Yes Yes YesLayer collections No No Yes YesSymbols ‐ overview and editing Yes Yes Yes YesLine types ‐ overview and editing Yes Yes Yes YesBase line, UCS Yes Yes Yes YesScale setting in drawing No No Yes YesCoordinate system No No Yes YesExternal references ‐ external references from TOP,DWG, DXF, DGN, PXY, KOF, SOSI, SDR, MX Genio, Shape,Mapinfo and other file formats No No Yes YesSearch object No No Yes YesObject properties Yes Yes Yes YesView history Yes Yes Yes YesSystemEdit code table Yes Yes Yes YesControl codes Yes Yes Yes YesAttribute management Yes Yes Yes YesSymbol management and editing Yes Yes Yes YesLine type management Yes Yes Yes YesRoad line manager No No No YesToolbox for point codes Yes Yes Yes YesSurvey dataCalculation of survey data Yes Yes Yes YesProcess coordinates from field to drawing Yes Yes Yes YesCalculate GPS data Yes Yes Yes YesCalculate GPS coordinates Yes Yes Yes YesCalculate levelling No No Yes YesSave levelling output No No Yes YesManuel entry of survey data Yes Yes Yes YesCreate traverse No No No YesCreate reduced mean values (face measurement) Yes Yes Yes YesCreate slew and lift reportRailroad module (requires profile module)Show history Yes Yes Yes YesPrint out survey data protocol No No Yes YesCoordinatesManual input of coordinates in a coordinate file No No No YesPrint out coordinates No No No YesTraverseManual input of data to traverse No No No YesImport survey data to traverse No No No Yescalculate traverse No No No Yes