DS-6 Intercom System Product Catalogue - Neumann Elektronik
DS-6 Intercom System Product Catalogue - Neumann Elektronik
DS-6 Intercom System Product Catalogue - Neumann Elektronik
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Accessories Outdoor Call Stations<br />
Auxiliary Amplifier EX 25 W<br />
ms NEUMANN ELEKTRONIK GmbH<br />
A call station in combination with an auxiliary amplifier and a loudspeaker can use the auxiliary loudspeaker as a PA<br />
speaker for incoming calls. Only the initial call to the call station is transmitted over the auxiliary loudspeaker. If the call<br />
station answers, its internal speaker is automatically used for the rest of the call. After approx. 20 seconds pause in the<br />
conversation, the call station returns to using the PA loudspeaker.<br />
25-W-Auxiliary amplifier 1)<br />
Art.-No. 1 570 3<br />
Facilities<br />
• Installable solder-free, on site<br />
• Temperature-controlled power limiter<br />
• PA operation with separate auxiliary loudspeaker<br />
• Auxiliary loudspeaker can be switched off<br />
• Installable in the following call stations:<br />
WFA: Art.-No. 1 590 5<br />
WFD: Art.-No. 1 595 0 and 1 681 6<br />
WFD-EX: Art.-No. 1 563 5, 1 564 6, 1 565 7<br />
And 1 521 9<br />
WFA-EX: Art.-No. 1 575 8, 1 576 9 and 1 577 0<br />
• Aready included in the following call Stations:<br />
WFD-EX: Art.-No. 1 560 2, 1 561 3 und 1 562 4<br />
WFA-EX: Art.-No. 1 578 1, 1 579 2 und 1 580 4<br />
Art.-No. 1 570 3<br />
Mounting 25 W auxiliary amplifier<br />
Electrical data<br />
10 1570 4<br />
Operating voltage range 48…60 V DC<br />
max. quiescent current<br />
max. operating current<br />
10 mA<br />
Output power 25 W at 400 Ω<br />
Output voltage 100 V (can be changed to 50 V)<br />
min. input voltage for nominal output 1 V<br />
Input impedance 20 kΩ (at 1 kHz)<br />
Frequency range (measured at V0=25 V AC) 200 Hz to 10 kHz (-3 to ±1 dB)<br />
Distortion factor (measured at V0=70 V AC)<br />
1)<br />
we recommend the heat conducting plate Art.-No. 99 8211 003 3 for mounting.<br />
≤5 %<br />
© 2012 ms NEUMANN ELEKTRONIK GMBH All rights reserved 959 7015 126 5 Issue 03 Subject to technical modifications 30<br />
Lahnstr. 30, 45478 Mülheim a. d. Ruhr, Phone +49 (0)208-5995-0, Fax +49 (0)208-5995-235, info@neumann-elektronik.com, www.neumann-elektronik.com