PANDUIT Termination Solutions - Newark

Terminals
A42
Butt Splice, Non-Insulated
Brazed seam protects terminal barrel from
splitting during the crimp process
Internal wire stop assures
proper length of insertion into
terminal barrel
Wire
Std.
Pkg.
Part Number
Range Tool
Qty.**
BS22-C* 26 – 22 AWG CT-100 100
BS18-C 22 – 18 AWG CT-100, CT-200, 100
BS14-C 16 – 14 AWG CT-600, CT-1570 100
BS10-L 12 – 10 AWG CT-100, CT-200,
CT-600, CT-1570,
CT-1701‡
*Not UL Listed.
**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000 and replace -L with -D for a bulk package of 500.
‡UL and CSA approved tooling/product combinations.
Parallel Splice, Nylon Insulated
Parallel design results in only one crimp
required to combine two wires
Wire Color
Std.
Pkg.
Part Number Range Code Tool Qty.**
PSN18-C 22 – 18 AWG Red
CT-100,
100
PSN16-C 20 – 16 AWG Blue CT-1525 100
**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000.
Parallel Splice, Non-Insulated
Part Number
Parallel design results in only one crimp
required to combine two wires
Non-insulated barrel can be used to provide
an economical termination
when insulation is not required
Wire
Range Tool
PS16-C 20 – 16 AWG
100
CT-100, CT-200
PS12-L 14 – 12 AWG 50
**To order in bulk, replace -C in the part number with -M for a bulk
package of 1000 and replace -L with -D for a bulk package of 500.
◆ For a complete line of terminal products, see the PANDUIT Electrical
Solutions Catalog, SA-ELCB03 at www.panduit.com
Prime items appear in BOLD.
Order number of pieces required, in multiples of Standard Package Quantity.
50
Std.
Pkg.
Qty.**