2006 - Dirt Jam Pro SL

More documents

Recommendations

Info

© Marzocchi Suspension2006 - Dirt Jam Pro SLAssembling: Assembling the top right capPut the fork in the vice in vertical position, fixing it by the dropouts.Check that O-ring is not damaged.Using the 21mm socket spanner, tighten cap (2) to the recommended tightening torque (10 Nm ± 1).Restore the correct air pressure (see settings).Fit the protection cap (1).Assembling: Assembling the top right capPut the fork in the vice in vertical position, fixing it by the dropouts.Check that O-ring is not damaged.Using the 21mm socket spanner, tighten cap (2) to the recommended tightening torque (10 Nm ± 1).Restore the correct air pressure (see settings).
© Marzocchi Suspension2006 - Dirt Jam Pro SLFit the protection cap (1).Assembling: Assembling the top left capUsing the special spanner, tighten the lock cap (2) to the recommended tightening torque (10 Nm ± 1).Restore the correct preload value, if necessary (see settings).
Page 1 and 2: © Marzocchi Suspension2006 - Dirt
Page 17: © Marzocchi Suspension2006 - Dirt

2006 - Dirt Jam Pro SL

Create successful ePaper yourself

Delete template?

Save as template?