Program Logic Manual - All about the IBM 1130 Computing System

ADDR REL OBJECT ST.NO. LABEL OPCD FT OPERANDS10/SEQN00075 * 57 * * CARTRIDGE ID, LOGICAL DRIVE 2 pMN007400076 * 58 * * CARTRIDGE ID, LOGICAL DRIVE 3 PMN007500077 * 59 * * CARTRIDGE ID, LOGICAL DRIVE 4 PMN007600078 * 60 * OCIBA * SCTR ADOR OF CIB, LOGICAL DR 0 PMN007700079 * 61 * * SCTR ADDR OF C113, LOGICAL DR 1 PMN007800080 * 62 * * SCTR ADDR OF CIB, LOGICAL DR 2 PMN007900081 * 63 * * SCTR ADOR OF CIB, LOGICAL DR 3 PmN008000082 * 64 * * SCTR ADDR OF CIB, LOGICAL DR 4 pMN008100083 * 65 * #SCRA * SCRA, LOGICAL DRIVE 0 PMN008200084 * 66 * * SCRA, LOGICAL DRIVE 1 PMN008300085 * 67 * * SCRA, LOGICAL DRIVE 2 PON008400086 * 68 * * SCRA, LOGICAL DRIVE 3 PONC08500087 * 69 * * SCRA, LOGICAL DRIVE 4 PMN008600088 * 70 * AFMAT * FORMAT OF PROG IN WS, DRIVE 0 PMN00870C089 * 71 * * FORMAT OF PROG IN WS, DRIVE 1 PMN008800090 * 72 * * FORMAT OF pROG IN WS, DRIVE 2 pMN008900091 * 73 * * FORMAT OF PROG IN WS, DRIVE 3 PMN009000092 * 74 * * FORMAT OF PROG IN WS, DRIVE 4 PMN00910C093 * 75 * OFLET * FLET SCTR ADDR, LOGICAL DR 0 PMN00920C094 * 76 * * FLET SCTR ADDR, LOGICAL OR 1 PMN009300095 * 77 * * FLET SCTR ADDR, LOGICAL OR 2 PMN009400096 * 78 * * FLET SCTR ADDR, LOGICAL DR 3 PMN009500097 * 79 * * fLET SCTR ADDR. LOGICAL DR 4 PMN009600098 * 80 * OWLET * LET SCTR ADDR, LOGICAL DR 0 PmN0097O0099 * 81 * * LET SCTR ADDR, LOGICAL DR 1 PMN009800100 * 82 * * LET SCTR ADDR, LOGICAL DR 2 PMN009900101 * 83 * * LET SCTR ADDS, LOGICAL DR 3 PMN010000102 * 84 * * LET SCTR ADDR, LOGICAL DR 4 PMN010100103 * 85 1, IWSCT * BLK CNT OF PROG IN WS, DRIVE 0 PMN010200104 * 86 * * BLK CNT OF PROG IN WS, DRIVE 1 PMN010300105 * 87 * * BLK CNT OF PROG IN WS, DRIVE 2 PMN010400106 * 88 * * BLK CNT OF PROG IN WS, DRIVE 3 PMN010500107 * 89 * * BLK CNT OF PROG IN WS, DRIVE 4 PMN010600108 * 90 * OCSHN * SCTR CNT CUSHION,LOGICAL DR 0 PMN010700109 * 91 * * SCTR CNT CUSHION,LOGICAL DR 1 PmN010800110 * 92 * * SCTR CNT CUSHION,LOGICAL DR 2 pmN010900111 * 93 * * SUER CNT CUSHION,LOGICAL OR 3 PMN011000117 * 94 * * SCTR CNT CUSHION,LOGICAL OR 4 PMN011100113 * 95-319 * * RESERVED FOR FUTURE USE PMN01120RESIDENT MONITORArm/ REL OBJECT ST.NO. LABEL OPCD FT OPERANDSIo/SEQNO0115 ************ *********** *** ***** *******************: =rim0116 *0117 *STATUS-VERSION 2, MODIFICATION 4 * PMN011600118 * PMN011700119 *FUNCTION/OPERATION- * PMN0118 00170 * THIS SECTION ALWAYS REMAINS IN CORE. IT * PMN011900121 * IS COMPRISED OF THE COMMUNICATIONS * PMN012000122 * AREA (COMMA), THE SKELETON SUPERVISOR, AND * 144012100123 * A DISK 4/0 SUBROUTINE, NOMINALLY DISKZ. (THE * PMN012200124 * FIRST TWO OF THESE SECTIONS ARE INTERMIXED.) * PMN012300175 * COMMA CONTAINS THE SYSTEM PARAMETERS REQUIR- * PMN012400126 * ED TO FETCH A CORE LOAD IN CORE IMAGE FOR-0127 * MAT. THE SKELETON SUPERVISOR PROVIDES IN- P=1;:g0128 * STRUCTIONS FOR INITIATING A CALL EXIT, A * PMN012700129 * CALL LINK, A DUMP-TO-PRINTER OR A CALL TO THE * PMN012800130 * AUXILIARY SUPERVISOR. IN ADDITION, THE SKELE-* PMN012900131 * TON SUPERVISOR CONTAINS SEVERAL TRAPS FOR CER-* PMN013000132 * TAIN I/O FUNCTIONS/CONDITIONS. THE DISK I/O * PMN013100133 * SECTION CONSISTS OF A SUBROUTINE FOR READING * 4411011200134 * FROM OR WRITING ON A DISK CARTRIDGE ON A * PMN013300135 * GIVEN LOGICAL DISK DRIVE. * FmN013400136** PMN013500137 *ENTRY POINTS- * PMN0 13600138 * * SPRET-A TRAP FOR PREOPERATIVE 1/0 ERRORS. * PMN013700139 *THE CALLING SEQUENCE IS * PMN013800140 *BSI L SPRET * PMN013900141 * * SPSTX-A POSTOPERATIVE ERROR TRAP FOR I/O * PMNO14000142 * DEVICES ON LEVEL X (X101,2,3,OR 4). * PMN014100143 * THE CALLING SEQUENCE IS * p mN01.4 200144 * BSI L SPSTX * PMN014300145 * * SSTOP-THE PROGRAM STOP KEY TRAP. * PMN014400146 * * SEXIT--THE ENTRY POINT FOR THE EXIT/CALL * PMN014500147 * EXIT STATEMENT. THE CALLING SEQUENCE IS* PMN014600148 * LDX 0 SEXIT * PMN014700149 * * SLINK-THE ENTRY POINT FOR THE LINK/CALL * PMN014800150 LINK STATEMENT. THE CALLING SEQUENCE IS* PMN014900151* BSI L SLINKPMN015000152 * * SOUMP--THE ENTRY POINT FOR THE DUMP/POMP * PMN015100153 STATEMENT. THE CALLING SEQUENCE IS * P1414015200154 * BSI L SCIUMP * PMN015300155 * DC FORMATLIMIT10156 * OC* PMN01540* PMN015500157 DC LIMIT2 * PMN015600158 * WHERE LIMITI AND LimIT2 ARE THE LIMITS * pmN015700159 * BETWEEN WHICH THE DUMP IS TO OCCUR, AND* PMNOI5800160 FORMAT IS A CODE INDICATING THE FORMAT * PMN015900161 OF THE DUMP. IF FORMAT IS NEGATIVE, * PMN016000162 * THE AUXILIARY SUPERVISOR IS FETCHED * = ilng0163 * AND CONTROL PASSED TO IT.324