11.07.2015 Views

OSS Immersion Survival Suit SOLAS Type Approval ... - Safety Marine

OSS Immersion Survival Suit SOLAS Type Approval ... - Safety Marine

OSS Immersion Survival Suit SOLAS Type Approval ... - Safety Marine

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

~poyçsegsertRTIFIED COPYManhime end Coasiguard AgencyAn Exeenlive Apecy or lie Depanmeni for TreespeilThis is to certify that:EC TYPE EXAMINATION (MODULE B) CERTIFICATELLOYD’S REGISTER VERIFICATION LIMITED (LRV), specified as a “notified body” under the terms of The MerchantShipping (<strong>Marine</strong> Equipment) Regulations SI. 1999 No. 1957, did undertake the relevant type approval procedures for theequipment identified below which was found to be in compliance with the essential Life Saving Appliance requirements of<strong>Marine</strong> Equipment Directive (?vIED) 96/98/ EC as modified by Commission Directives 98/85/ EC, 2001 /53/EC,2002/75/EC, 2002/84/EC, 2008/67/EC, 2009/26/EC and 2010/68/EU subject to any conditions in the Design AppraisalDocument attached hereto.ManufacturerSagitarrius Sporting GoodsAddress No 60 Lane 908Feng Lin 2nd RoadTa LiaoKaohsiungTaiwanAnnex Al ItemProduct <strong>Type</strong>Product DescriptionAi/1.5 - IMMERSION SUITS & ANTI-EXPOSURE SUITS NOT CLASSIFIED ASLIFEJACKETS - INSULATED OR NOT INSULATEDIMMERSION SUITSInsulated immersion suit to be worn together with an approved lifejacket - <strong>Type</strong>“<strong>OSS</strong> Insulated <strong>Immersion</strong> <strong>Suit</strong>”Specified Standard IMO Resolution MSC.81(?0), Fart 1, as amended by resolution MSC 226(82)The attached Design Appraisal Document (schedule) forms part of this certificate.This certificate remains valid unless cancelled or revoked, provided the conditions in the attached schedule are complied withand the equipment remains satisfactory in service.Date of issue 1 February 2011 Expiry date 31 January 2016r~oyd’s Register,—7en cation LnteilCertificate No. MED 1150051 Signed ~./ e (J I’S4~’hamptori Office $ rSheet No I of 3 Name L. ThomasFor and on behalf of Lloyd’s Register VerificationLRV EC Distinguishing No. 0038Note:This certificate is not valid for equipment; the design or manufacture of which has been varied or modified from thespecimen tested. The manufacturer should notify the notified body named on this certificate of any modification or changesto the equipment in order to obtain a valid Certificate.allowed to affix the “Mark of Conformity” to the Product described herein.yy Last two digits of year mark affixedThis certificate is issued under the authority of the MCA.‘Uoyd’s Register Verification is the business name of Lloyd’s Register Verification Limited, a member ofS Subjectthe Lloydsto complianceRegister Group.with the conditions in the attached Design Appraisal Document (schedule), whichRegistration number 4929226.0038/n’ Registered office 71 Fenchurch Street London EC3M 48S, EnglandLloyd’s Register, Its aff iates and subs diaries and their respective officers. emp oyees or agents are, ndividually and collectively, referred to in this clause as the‘Lloyd’s Register Group’ The Lloyd 5 Register Group assumes no responsibil ty and sha I not be liable to any person for any loss, damage or expense caused by relianceon the information or advice n th s document or howsoever provided, unless that person has signed a contract with the relevant Lloyd’s Register Group entity for theprovision of this information or adv ce and n that case any responsibility or ab ty s exc usvely on the terms and conditions set out in that contract.’


CERTIFIED COPY10 Lloyd’s 71 Pen church Register Street, London, Verification EC3M 48S Limited 2Document of 3numberEeg)~ii1er Telephone 02074232416 Fax 02074232053 MED 1150051Email tad@lr.orgIssue number1DESIGN APPRAISAL DOCUMENTDaleQuote Ibis reference on all future coimnunications1 February 2011 LDSO/TA/SFS/LTPageATrACHMENT TO EC TYPE EXAMINATION (MODULE B) CERTIFICATE No. MED 1150051The undemoted documents have been appraised for compliance with the relevant requirements of InternationalConventions and European Union legislation for the EC <strong>Type</strong> Examination of <strong>Marine</strong> Equipment for use onMerchant Ships Registered in the European Economic Area.This Design Appraisal Document (schedule) forms part of the Certificate.EXAMINED DOCUMENTATIONTechnical file, Issue 2, dated October 25, 2010.Drawing Revision DateCWISO3-0000/ M A 12-01-05CWISO3-0000/S A 12-01-05CWISO3-0000/ L A 12-01 05CWISO3-0000/ XL A 12-01-05TEST REPORTSSINTEF Laboratory Project No 78B02030, dated 11/03/2004.CONDITIONS OF CERTIFICATION1. Each immersion suit and its packaging shall be marked with the height/weight range of persons for whomit is approved• Model FP CWISO3/S- ADULT SMALL, for weight under 65 kg & maximum height of 175 cm;• Model FP CWISO3/M-ADULT MEDIUM, for weight 65-80 kg & maximum height 180 cm;• Model FP CWISO3/L- ADULT LARGE, for weight 80-95 kg & maximum height 190 cm;• Model FP CWISO3/XL- ADULT EXTRA LARGE, for weight over 95 kg & maximum height 200 cm.2. Each immersion suit and its packaging shall be permanently and clearly marked at least with: identification ofthe manufadurer and the model designation, simple donning instructions, approval information and text “Tobe worn in conjunction with a compatible lifejacket”3. Each immersion suit shall be supplied with an explanatory leaflet containing instructions for care andmaintenance of the immersion suit. When carrying out the inspection of immersion suits as required by <strong>SOLAS</strong>regulation 111/20.7.2 consideration should be given to IMO MSC/Circ.1047 on Guidelines for MonthlyShipboard Inspection of <strong>Immersion</strong> <strong>Suit</strong>s and Anti-exposure <strong>Suit</strong>s by the Ship’s Crew.FORM 6438(04/96)‘Lloyd’s Regisler Venfication is the business name of Lloyd’s Register Verification Limited, a member ofLloyd’s Register Group.Registration number 4929226.


CERTIFIED COPY______lo Lloyd’s 71 Fenchurch Register Street, London, Verification EC3M 4BS Limited 3Document of 3 numberDESIGN APPRAISAL DOCUMENT‘Telephone 02074232416 Fax 02074232053Email tad@lr.orgDateQuote this reference on all luture communications1 February 2011 LDSO/TA/SFS/LTMED1I5005IIssue numberIATrACHMENT TO EC TYPE EXAMINATION (MODULE B) CERTIFICATE No. MED 11500514. When required, an approved light and whistle meeting the requirements of ISA Code regulations 11/2.2.3 and11/2.2.114, respectively, are to be fitted. The light or lights selected to be attached to the immersion suit shall betested to the requirements of IMO Resolution MSC.81i70), 1/10.3.3 to confirm the adequacy of their means ofattachment.5. The on board arrangements and installation of this product are not part of this design appraisal or certificate.All such arrangements are to be to the satisfaction of the Surveyors attending on board.6. If the specified standards are amended during the validity of this certificate, the product is to be re-approvedprior to it being supplied to vessels to which the amended standards apply.7. Production items are to be manufactured in accordance with either an approved Production Quality Assurancesystem (Module D) or Product Quality Assurance (Module E) or Product Verification (Module F) of the <strong>Marine</strong>Equipment Directive.8. Production tests are to be conducted in accordance with the applicable requirements of IMO ResolutionMSC.81c70), Fart 2 and be recorded by the manufacturer in accordance with either the approved ProductionQuality Assurance system (Module D) or Product Quality Assurance (Module F) or witnessed by the NotifiedBody as required by the Product Verification (Module F) of the <strong>Marine</strong> Equipment Directive. This does notpreclude any further testing to additional requirements of the <strong>Marine</strong> Administration of the country where theship is registered (i.e. the flag state) or those acting on behalf of that Administration.9. Each item, batch or lot of the equipment is to have the “Mark of Conformity” affixed and be issued with a“Declaration of Conformity”.10. Should a change of Place of Production from that stated below be required, i.e. where stages ofmanufacture/assembly/testing of this product take place, the new Place of Production is to be advised to usprior to the change taking place. This Certificate will require to be updated for <strong>Approval</strong> to be maintained.PLACE OF PRODUCrIONXiamen Feipeng IndustryIndustrial District Houxi Xincun JimeiXiamen 361024 FujianChinaLLloyds Register/ Verification Li ______________~1hampran rne~ : erL. ThomasSenior SurveyorFor and on behalf of Uoyd’s Register VerificationLRV EC Distinguishing No.0038FORM 6438(04196)“Lloyds Register Venfication is the business name of Lloyds Register Venfication Limited, a member ofLloyds Register Group.Registration number 4929226

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!