OSS Immersion Survival Suit SOLAS Type Approval ... - Safety Marine

CERTIFIED COPY______lo Lloyd’s 71 Fenchurch Register Street, London, Verification EC3M 4BS Limited 3Document of 3 numberDESIGN APPRAISAL DOCUMENT‘Telephone 02074232416 Fax 02074232053Email tad@lr.orgDateQuote this reference on all luture communications1 February 2011 LDSO/TA/SFS/LTMED1I5005IIssue numberIATrACHMENT TO EC TYPE EXAMINATION (MODULE B) CERTIFICATE No. MED 11500514. When required, an approved light and whistle meeting the requirements of ISA Code regulations 11/2.2.3 and11/2.2.114, respectively, are to be fitted. The light or lights selected to be attached to the immersion suit shall betested to the requirements of IMO Resolution MSC.81i70), 1/10.3.3 to confirm the adequacy of their means ofattachment.5. The on board arrangements and installation of this product are not part of this design appraisal or certificate.All such arrangements are to be to the satisfaction of the Surveyors attending on board.6. If the specified standards are amended during the validity of this certificate, the product is to be re-approvedprior to it being supplied to vessels to which the amended standards apply.7. Production items are to be manufactured in accordance with either an approved Production Quality Assurancesystem (Module D) or Product Quality Assurance (Module E) or Product Verification (Module F) of the MarineEquipment Directive.8. Production tests are to be conducted in accordance with the applicable requirements of IMO ResolutionMSC.81c70), Fart 2 and be recorded by the manufacturer in accordance with either the approved ProductionQuality Assurance system (Module D) or Product Quality Assurance (Module F) or witnessed by the NotifiedBody as required by the Product Verification (Module F) of the Marine Equipment Directive. This does notpreclude any further testing to additional requirements of the Marine Administration of the country where theship is registered (i.e. the flag state) or those acting on behalf of that Administration.9. Each item, batch or lot of the equipment is to have the “Mark of Conformity” affixed and be issued with a“Declaration of Conformity”.10. Should a change of Place of Production from that stated below be required, i.e. where stages ofmanufacture/assembly/testing of this product take place, the new Place of Production is to be advised to usprior to the change taking place. This Certificate will require to be updated for Approval to be maintained.PLACE OF PRODUCrIONXiamen Feipeng IndustryIndustrial District Houxi Xincun JimeiXiamen 361024 FujianChinaLLloyds Register/ Verification Li ______________~1hampran rne~ : erL. ThomasSenior SurveyorFor and on behalf of Uoyd’s Register VerificationLRV EC Distinguishing No.0038FORM 6438(04196)“Lloyds Register Venfication is the business name of Lloyds Register Venfication Limited, a member ofLloyds Register Group.Registration number 4929226