11.07.2015 Views

TS 92 TS 91 DORMA - BW Hardware

TS 92 TS 91 DORMA - BW Hardware

TS 92 TS 91 DORMA - BW Hardware

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

CERTIFICATE No CF 119<strong>DORMA</strong> UK LIMITED<strong>DORMA</strong> <strong>TS</strong>90, <strong>TS</strong><strong>91</strong>, <strong>TS</strong><strong>92</strong>, <strong>TS</strong>93, <strong>TS</strong>97 and <strong>TS</strong>99 OVERHEAD MOUNTED DOOR CLOSERS1. Dorma <strong>TS</strong>90, <strong>TS</strong> <strong>91</strong>, <strong>TS</strong> <strong>92</strong>, <strong>TS</strong>93, <strong>TS</strong>97 and <strong>TS</strong> 99 are overhead mounted door closingdevices, the <strong>TS</strong><strong>92</strong> and <strong>TS</strong>93 have adjustable power. Dorma <strong>TS</strong> 93 also includes integralbackcheck. <strong>TS</strong>99 is a free swing unit complying with EN 1155.2. This certification is designed to demonstrate compliance of the product or system specificallywith Approved Document B (England and Wales), Section D of the Technical Standards(Scotland), Technical Booklet E (N. Ireland). If compliance is required to other regulatory orguidance documents there may be additional considerations or conflict to be taken intoaccount.3. This approval relates to its use with the following door assemblies:-Latched and unlatched, intumescent sealed door assemblies consisting oftimber faced and edged leaves with timber, cellulosic or mineral cores intimber frames having a fire resistance up to 120 minutes (Code ITT).andLatched and unlatched, door assemblies consisting of metallic leaves andframes having a fire resistance up to 240 minutes (Codes MM and IMM).4. The closers are approved on the basis of:i) Initial type testing to EN1154 and BS EN 1634-1: 2000iii) An appraisal against <strong>TS</strong>34iii) Certification of quality management system to ISO 9001: 2000.iv) Inspection and surveillance of factory production controlv) Ongoing audit testing in accordance with EN 1154 requirements5. This approval is applicable only to the specified closers used with door assemblies of provenfire resistance (as defined in BS EN 1634-1: 2000 or BS 476: Part 22: 1987) and havingpower ratings appropriate to the leaf sizes subject to a minimum size 3 (as specified in BS EN1154).6. The approval relates to on going production. Product and/or its immediate packaging isidentified with the manufacturers’ name, the product name or number, the CERTIFIRE nameor name and mark, together with the CERTIFIRE certificate number and application whereappropriate.Page 2 of 4 Signed Issued: 3 rd February 19<strong>92</strong>Reissued: 19 th February 2007Valid to: 18 th February 2012

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!