OPERATION MANUAL - Daikin AC

ECONO OperationECONO operation is a function which enables effi cient operation by limiting themaximum power consumption value.This function is useful for cases in which attention should be paid to ensure acircuit breaker will not trip when the product runs alongside other appliances.• To start ECONO operationPressduring operation.• “ ” is displayed on the LCD.• To cancel ECONO operationPressagain.• “ ” is no longer displayed on the LCD.[Example]Normal operationECONO operation• In case the air conditioner and otherappliances which require high powerconsumption are used at same time, a circuitbreaker may trip if the air conditioner operatewith its maximum capacity.• The maximum power consumption of the airconditioner is limited by using ECONO operation.The circuit breaker is unlikely to trip even if theair conditioner and other appliances are used atsame time.Running current andpower consumptionECONOoperationNormaloperationMaximum duringnormal operationMaximum duringECONO operation• This diagram is a representation for illustrativepurposes only.The maximum running current and powerconsumption of the air conditioner in ECONOoperation vary with the connecting outdoorunit.NOTE• Notes on ECONO operation19TimeFrom start up until set temperature is reached• ECONO operation can only be set when the unit is running. Pressing causes the settings to be canceled, and “ ” is no longer displayedon the LCD.• ECONO operation functions in AUTO, COOL, DRY, and HEAT operation.• POWERFUL and ECONO operation cannot be used at the same time.Priority is given to the function of whichever button is pressed last.• If the level of power consumption is already low, ECONO operation will not drop the power consumption.