Korfund Elastomeric Isolator Catalog - Davidson Sales Co.

CORK-RIBSERIESELASTOMERICMOUNTSAPPLICATIONSUP TO4800 LBLOAD RANGECORK & WAFFLE EMBOSSED MOUNTING PADSCork-Rib Mounts are close-grained cork pads that providethe highest degree of sound attenuation andvibration isolation attainable in a pad-type mount. TheCork-Rib Pads are very effective in heavy load situations– processing equipment, hammers, punch pressesand textile machinery.Cork-Rib Pads consist of 1/2” thick compressed corkcenters bonded between two layers of 1/4” thick waffle-shapedelastomer. Two types are available – Cork-Rib Pads and Cork-Rib Flex-Plates. Cork-Rib Pads are1” thick and are available in sheets of 24” x 36”, 18” x36” and 18” x 18”. Smaller pads are also available.psi. The Flex-Plates add a load-spreading steel platebetween the elastomeric waffle layer and the cork center.The strongest Flex-Plate design can handle 4800lbs. of static load.Cork-Rib Pads offer exceptional gripping qualities –eliminating the need for bolting or cementing pads tothe equipment or to the floor. The Flex-Plate types alsooffer bolt holes and isolation washers for extra security,or extra thick steel plates with counter-bored holes forself-leveling machinery. All Cork-Rib mountings resistthe oils, water and acids normally encountered in commercialand industrial applications.Cork-Rib Flex-Plates are for use in applications whereconcentrated loads exceed a maximum bearing of 120FEATURES & BENEFITS• Load ranges up to 120 psi provide isolation undera wide range of heavy load applications.• Compressed cork centers bonded between twolayers of waffle-shaped elastomer offer superiorsound attenuation and vibration isolation.• Waffle-shaped outer pads offer exceptionalgripping and require no bolting or cementing inmost applications.• Wide range of product sizes and a steel plateoption provide a variety of pad choices to meetspecific requirements.• Cork and elastomeric construction resists oils,water and acids normally encountered in commercialand industrial applications.NOTE: VMC can mold almost any elastomer into any of its elastomer mount products. Special materials include, but are not limited to, natural rubber, Weather Resistant (WR), HighDamped Silicone, Extreme High Temperature (EHT) Silicone, Nitrile and EPDM. Many of these are color coded by hardness.650Vibration Mountings & Controls, Inc.