2002 - Zemax

Release noteshttp://www.zemax.com/updates/notes_2002.htmlPage 14 of 221/8/2007the phase aberrations inrefractions followingmirror spaces.3. ZPL function MCOPwas causing anincorrect syntax error.4. The ZPL NSTRcommand ignored thepolarization setting ifpolarization wasswitched off on the raytrace control dialog.5. The MTF vs. Field plotonly worked properly inconfiguration 1.6. The auto-thermal toolwas not copying over allexisting operand data.7. The lens catalog insertdid not correctly reverselenses inserted after amirror.8. The scale lens featureincorrectly scaled phaseterms on the binary 1and 2 surfaces.9. NSC Binary 2 objectswith very large phasecoefficients were notray tracing correctly.10. When splitting andscattering rays in NSCmode, the ghost anddiffracted from flagscould get mixed up.11. The prescription reportwas listing the surfacedecenter y as the xvalue.12. The consider distortionoption on extendeddiffraction imageanalysis was using theincorrect field positionto account for distortion.April 4, 2002