Original Line Cylinders - PW Romex

Original Line CylindersHowtoOrder 1.3Introduction to Bimba Cylinders 1.4-1.9StandardAir Cylinders 1.10-1.65Original LineCylindersThree-Position Cylinders 1.66-1.67AirCylinderswith AdjustableCushions 1.68-1.75®MRS Cylinders 1.76-1.86Non-Rotating AirCylinders 1.87-1.97PC Cylinders 1.98-1.103NEWAllStainless Steel Non-RepairableOriginal Line Cylinders 1.104-1.111AllStainless Steel Repairable(Bell Ring Style)Original Line Cylinders 1.112-1.113ZLine AirCylinders 1.114-1.119RodLock Cylinders 1.120-1.123500 Hydraulic Cylinders 1.124-1.129Hole Punch Cylinders 1.130

BimbaOriginal Line CylindersOriginal LineCylindersWORKING WITH BIMBA GIVES YOU:• The Original stainless steel body cylindercompany —with more sizes and optionsthan any other manufacturer.• Fast service —many modelsand sizes kept in stock forimmediate delivery.• Worldwide availability through local stockingdistributors.• Custom-design capabilities for your specificneeds.Rod threads rollformedfor highstrengthLow frictionBuna N“U” cuprod seal (optionalHigh or Lowtemperature options)High strengthaluminum alloyporting endsLow frictionBuna N“U” cuppiston seals(optional HighTemperatureoption or Lowtemperature seals)High-strengthaluminum alloy pistonwith blow-by flatsOUR ORIGINALLINE CYLINDERFEATURES ANDADVANTAGESINCLUDE:• 304 stainless steel body withmirror finish ID for long, reliable life.Piston rod —highstrength carbon orType 303 stainlesssteel (see page 1.5for more info)Oil-impregnatedrod guide bushing(except5/16", 7/16" and9/16" singleacting)Double rolled-inconstructionType 304 stainlesssteel bodyPiston rodthreaded,sealedand riveted• Roll-formed rod threads onboth ends for high strength.• Pre-lubrication with HT-99, ourspecially-formulated oil compound,for extensive maintenance-freeperformance.• Piston-to-rod connection isthreaded, sealed and rivetedsecurely in place.• Low breakaway frictional characteristics:collapsible U-cup rod and pistonseals; oil-impregnated, sintered bronze rodbushing on most sizes; and breakaway slots oneach endcap for fast seal inflation.1.2• Blow-by flats on doubleacting model pistons ensuresproper seal inflation.• 250 psi rating.• High strength aluminum alloyporting ends, machined forminimal breakaway duringinitial pressurization.

Bimba Original Line–Stainless Steel Body Air CylindersHowtoOrderThe model number of all Original Line cylinders consistsof three alphanumeric clusters. These designate producttype, bore size and stroke length, and mounting stylesand options.Please refer to the charts below for an example of modelnumber BR-013-DBEE0.5. This is arear block, 7/16"bore, 3" stroke double acting cylinder with bumpers andan extra extension of 1/2".TYPEBXX –Block or Trunnion Mounted (BF, BR,BFT, BRT, BFM, BRM, BFTM, BRTM)C–Cushion(CR, CF, CS, CM, CRM, CFM, CSM)H–Hydraulic cylinderHL –Low Pressure Hydraulic(250 PSI maximum)M–Magnet option for standard cylindersMRS ® –Magnetic Reed Switch CylinderSR –Stainless rod, if nonstandardBORE SIZE/POWER FACTOR007 –5/16"01 –7/16"02 –9/16"04 –3/4"06 –7/8"09 –1-1/16"12 –1-1/4"17 –1-1/2"24 –1-3/4"31 –2"50 –21/2"70 –3"STROKE LENGTHIn inches and decimalfractions, i.e. 1.75 (Seeindividual models for standardand maximum stroke)BR-013 -DBEE0.5MOUNTING STYLE(see individual bore sizes fordesignations)OPTIONS*(in alphabetical order, except for EE which is last)B – BumpersE – Seals and factory lubrication for long life in non-lubeapplicationsEEX.XX – Extra Rod Extension of X.XXF – Molycoated bodyG – Magnalube ® GLubricationH – Heavy Spring (H designated before mounting style)JR – Double-Acting Spring ExtendJS – Double-Acting Spring ReturnK – Ports rotated 90°N – Low temperature seals &lubricationNT – NoThreadQ – Side ported rear headT – Switch Track (T1, T2, T3 or T4) see Position SensingSolutions, page 8.3 for switch selection informationV – High temperature seals &lubricationW – Rod WiperY – Pivot bushing replaces pivot pin*Consult your distributor or option combination availability chart page 1.4.®Magnalube is atrademark of Carleton Stuart Corporation.5/16" – 0.077/16" – 0.159/16" – 0.253/4" – 0.47/8" – 0.61-1/16" – 0.91-1/4" – 1.21-1/2" – 1.71-3/4" – 2.42" – 3.12-1/2" – 5.03" – 7.0Approximate Power FactorsFORCE = Airline x Piston AreaPressurePISTON = Bimba Power FactorAREAFORCE = Airline x Bimba PowerPressure FactorBimba has made sizing acylinder as easy asknowing the model number.Each base model numberis developed by calculatingthe area of the cylinderbore. This area, or PowerFactor, will provide theforce the cylinder will exertwhen multiplied by theairline pressure.1.3ForTechnical Assistance: 800-442-4622

Bimba Original Line – Stainless Steel Body Air CylindersOptionsMany options can be added to our standard cylinders. Options vary by bore size. Seeindividual bore sizes for valid options, pricing and length adders for that size. Consult specificcylinder types in this catalog for options available for those cylinder types.Option Combination Availability ChartDue to design or compatibility restrictions, the following options may NOT be ordered in combination. For example, option K(ports rotated) and option Q(side ported rear head) are not avalid combination.Options F, NT and EE are available independently, with each other or with all other options or viable option combinations.options W 3 4 B 2 5 V 2 4 H K Y N2 Q G E HL 6High Heavy Ports Pivot Low Side Ported Magnalube Special Low Pressuresize Wiper Bumper Temperature Spring Rotated 90º Bushing Temperature Rear Head G Lube &Seals Hydraulic007 N/A STD N, E N/A Q STD V,G,E, HL K N,E,HL N,G,V,HL G,N,E,F,H01 N/A N, HL N, E N/A Q Q B,V,G,E, HL K,Y N, E, HL N, G, V, HL B,G,N,E,F,H02 N/A N, HL N, E N/A Q STD B,V,G,E, HL K N,E,HL N,G,V,HL B,G,N,E,F,H04, 09, 17 H,N N, HL N, E W,HL Q Q W,B,V,G,E, HL K,Y N, E, HL N, G, V, HL B,G,N,E,F,H06, 12, 24 N/A STD, HL N, E N/A Q Q V,G,E, HL K,Y N, E, HL N, G, V, HL B,G,N,E,F,H31, 50 N/A N, HL N, E N/A Q STD B,V,G,E, HL K N,E,HL N,G,V,HL B,G,N,E,F,H70 N/A N, HL N, E N/A Q STD V,G,E, HL K N,E,HL N,G,V,HL B,G,N,E,F,HNotes:1 Option Misdesignated as aprefix, (ie M-041-DXP). When Misspecified, the piston rod will be made of 303 stainless steel. Certain bore sizes and mountingstyles offer the stainless rod standard.2 When bumpers are standard and high or low temperature option is specified, the bumpers are omitted and the overall length of the cylinder may decrease.When bumpers and high temperature are ordered as options on the same cylinder, the bumper material will be standard Buna N.3 Wipers are available in double acting and reverse single acting models only. Wipers may not be available with certain mounting configurations. Consult thespecific bore size in this catalog for detail.4 When high temperature and the magnetic options are combined, operating temperature remains at 200°F. This combination is recommended whenFluoroelastomer seals are specified for compatibility. When specifying the high temperature and wiper options together, astandard Buna NorUrethane wiperwill be provided.5 Bumpers are available in only double acting models for the 17 and 31 bores.6 Option HL applies only to Double Acting Original Line cylinders and is not available with the following series: Cushion, PC, MRS, NR, Z-Line, DNR, 500Hydraulic and Multiple Position.Overall Length Reductions for Options N&VDouble Acting0070-DVN/A0070-DXPN .08"BF-0070-DN .08"060-D (V or N) .22"060-DXP (V or N) .22"060-DXDE (V or N) .25"120-D (V or N) .19"120-DP (V or N) .19"120-DXDE (V or N) .25"120-DXDEH (V or N) .25"240-D (V or N) .25"240-DP (V or N) .25"240-DXDE (V or N) .25"*0070 bumpers are high temperature optionmaterial and not removed when hightemperature option is specified.Single Acting0070-N .04"0070-XPN .04"0070-RN .04"0070-RPN .04"060- (V or N) .09"060-NR (V or N) .09"060-RP (V or N) .125"060-R (V or N) .125"120- (V or N) .125"120-NR (V or N) .125"120-NRP (V or N) .125"120-P (V or N) .125"120-R (V or N) .125"120-RP (V or N) .125"240- (V or N) .125"240-NR (V or N) .125"240-P (V or N) .125"240-R (V or N) .125"1.4The switch track and port orientation whenordering the “Z” (Switch Track) &“K” (PortsRotated) options on an Original Line MRScylinder is shown Below. Double track option Zand Kcannot be ordered in combination.MRS- -DXPMRS- -DXPZK

Bimba Original Line–Stainless Steel Body Air CylindersAccessoriesLubricationAccessories have separate catalog numbers and are shown at the end of each bore sizesection. Most accessories are zinc-plated carbon steel. We also offer stainless steelaccessories in some bore sizes.All BIMBA cylinders are prelubricated with our special HT-99 lubrication and sealed at thefactory for extensive maintenance-free life. Cylinder life can be lengthened by providingadditional lubricant with an air line mist lubricator or direct introduction of oil to the cylinderevery 500 hours of operation. Both Magnalube Gand HT-99 can now be purchased from yourBimba distributor.MAG-G-3CC $6.75/bagHT-99-7CC $3.70/bag(each bag contains six ampules)Requirements will vary depending on the application. In general, one ampule will provide 500hours of lubrication service for one 1-1⁄2" bore, 12" stroke double acting cylinder.Other recommended oils for Buna Nseals are medium to heavy inhibited, nondetergenthydraulic and general purpose oil. For cylinders with high temperature seals, use Dow Corning#710. For cylinders with low temperature seals, Dow Corning #55 grease is recommended.Piston RodMaterialMagnalube Gcan be ordered by specifying option G. Magnalube G’s non-migratory propertiesprovide benefits in applications where migration of lubricant can be problematic for cylinderperformance or the application. Molycoating is available as standard option F. It is adry, thinfilm of lubricant on the cylinder wall that can reduce piston seal wear. Bimba’s new option Eprovides aproprietary combination of seal material and lubrication for extended life in nonlubricatedenvironments. Other types of factory lubrication are available as required.Standard models feature ground and polished, high strength carbon steel piston rod orgroundand roller burnished type 303 stainless steel. Stainless steel can also be ordered as an optionon most models (see models for pricing). Stainless steel is standard onthe following models:• All 5/16", 7/16" and 9/16" bore cylinders• All cylinders with adjustable cushions• All 9/16" through 3" bore cylinders ordered with Magnet (M) option• MRS cylinders• “Z” Line cylinders• Block and Trunnion-mounted cylinders• Universal mount, double-end rod cylindersHard chrome plated rod isstandard on“500” Hydraulic cylinders.TemperatureRangeBuna Nseals with atemperature range of -20° F(-29° C) to 200° F(95° C) are standard inallBIMBA air cylinders. Fluoroelastomer seals rated for higher temperature applications (up to400° F) are available. When specifying our magnetic piston (“M” option), maximum operatingtemperature is185˚ Fbased on the material of the magnet. If cylinders are operated attemperatures below 0° Ffor extended time periods, our low temperature seal and lubricationoption (N) is recommended. This option has atemperature range of -40° Fto200° F. Ifcylinders are operated below -20° Fwith low temperature seals for extended time periods,cylinder performance will be affected by the cold temperature.1.5ForTechnical Assistance: 800-442-4622

Bimba Original Line–Stainless Steel Body Air CylindersMountingFree TestCylinderSpecialCylindersDelivery/AvailabilityChoosingthe RightCylinderCylinderLifeExpectancyMounting should be by the threaded stud ends, pivot or bolt holes provided. Mount cylindersto provide alignment with the driven mechanism, avoiding side loads that restrict the freeoperation of the cylinder.Since 1975, our policy has been to provide aFREE TEST CYLINDER to any qualified originalequipment manufacturer. This service is provided at no obligation, but we would appreciate acopy of your test results. Contact us or your local stocking BIMBA distributor for moreinformation.Do you have acomplicated or unusual application? BIMBA will custom-design and build thecylinder that will solve your problem. Whatever your needs—special stroke, mounting styles,rod-end configurations, seal materials, dimensional changes, etc.—contact us or your localstocking BIMBA distributor.Bimba cylinders are sold through local stocking distributors. Each distributor maintains aninventory of our most popular models. At the factory, Bimba classifies cylinders as shelvingand nonshelving models. More than 125,000 units of various shelving models are kept instock for immediate delivery. Standard stroke lengths shown in blue are stocked at Bimba.(Most stocked models shown in blue do not include options.) These stroke lengths areavailable in limited quantities for immediate shipment. Bimba also stocks alarge quantity ofcylinders with options such as stainless steel rods or bumpers. Nonstocked standard modelsare manufactured within 5working days.See Bimba handbook, “Tips for Maximizing Cylinder Performance,” for more information onchoosing cylinder types, sizes, options and accessories.Bimba cylinders have been designed and tested for arated life of 1400 miles of travel whenproperly applied and lubricated per recommendations. Bimba’s option Ehas been designedand tested for arated life of 2,800 miles of travel when properly applied in an unlubricatedenvironment.1.6

Bimba Original Line–Stainless Steel Body Air CylindersTypes ofCylindersBimba manufactures several different types of Original Line cylinders for your applications. These includethe basic 5/16" to 3" bore cylinders described on pages 1.10-1.64. Weights published for each cylinderare approximate. Additional styles include:Three-PositionCylindersThis multi-position Original Line stainless body cylinder provides three positive stroke positions with asingle cylinder.Cushion CylindersThese include adjustable air cushions that slow cylinder speed at the end of stroke, reducing impact andextending cylinder life. Cushions can be ordered on rear, front or both ends, and can be ordered incombination with magnetic pistons.MRS CylindersThese include amagnet on the piston, designed to operate Bimba switches to actuate programmablecontrollers, relays, solenoids, timers or other electrically operated equipment. Dimensional differences fromthe basic Original Line include larger mounting threads and longer overall lengths in certain bore sizes.Non-RotatingCylindersDouble acting and reverse acting non-rotating cylinders have aunique square piston rod with roundedcorners. They are dimensionally interchangeable with the standard Original Line.PC CylindersThese cylinders include acetal resin end caps. They are ideal for applications and environments thatrequire exposure tomoisture, lubricants and specific solvents. All dimensions except 1 1 ⁄2 "bore nosethreads are interchangeable with the Original Line.All Stainless Steel Non-Repairable CylindersThe new all stainless Original Line cylinders are the perfect solution for applications inthe foodprocessing/packaging, medical, chemical, or marine environments where wash down solutions or othercorrosives are present in the environment. Designed to be dimensionally interchangeable with our standardOriginal Line, these cylinders offer acost effective method of extending cylinder life in difficult applicationenvironments.All Stainless Steel Repairable CylindersThe new all stainless repairable Original Line cylinders are ideal for food processing, chemical, medical,pharmaceutical, offshore ormarine equipment, and energy production or waste management applications.The bell ring design also offers the added benefit of full repairability without the need for hand tools bysecuring the body to the rod guide with aknurled, threaded nut.Z-line CylindersFor extremely tough applications, with larger diameter, two-piece piston rod, elastomer bumpers and BunaNU-cup seals for low breakaway.Rod Lock CylindersThis cylinder is anormally clamped unit that holds the piston rod inposition when air pressure isnotpresent. It is ideal for preventing drift at machine shut down.500 HydraulicCylindersFor hydraulic use, up to 500 psi.Low PressureHydraulic CylindersDesigned for use in low pressure hydraulic circuits with pressures not exceeding 250 psi. The designincorporates chrome plated piston rods and block-vee seals.Hole PunchersThese are designed to punch millions of holes in thin film or plastic materials 2to3mils thick.1.7ForTechnical Assistance: 800-442-4622

Bimba Original Line–Stainless Steel Body Air CylindersStrokeLengthsFractionalStrokeLengthsStandard stroke lengths and recommended maximum stroke lengths are listed in each modeldescription. Special stroke lengths are available upon request. Stroke lengths are available inlengths longer than published, but an application review may be required. The cost per inch ofstroke is listed below the base price of each cylinder. Onmodels with 1/2" standard strokelength increments, add 1/2 of the per inch price for the 1/2" inch of stroke.NOTE ON ROD MATERIAL: Bore sizes 3/4" to 1-3/4": rod lengths greater than 12" (stroke plus extra extension)require astainless steel rod. Bore sizes 2" to 3": rod lengths greater than 6" require astainless steel rod. Rodlength equals stroke plus extension.Fractional stroke lengths for single and reverse acting cylinders, both standard andnonstandard, require special calculations to determine cylinder dimensions. The followingequations apply:Single Acting CylindersCalculate the length of next whole standard incrementof stroke, then subtract the difference between desiredstroke and next longer whole increment of stroke.Example: 092.75090 Base length = 1.94"Plus 1.56 per inch of stroke = + 4.68"1.56 X3.0 (next longerstroke increment)093 length = 6.62Whole stroke increment = 3.00"Minus desired stroke = - 2.75Stroke difference = .25 ... -0.25092.75 length = 6.37"Reverse Acting CylindersCalculate length of next longer standard incrementof stroke, then subtract twice the difference betweendesired stroke and next longer standard increment ofstroke.Example: 011.625-RP010-RP Base length = 2.38"Plus 1.44 per each 0.5" of stroke = + 5.761.44 X4(number of standardincrements required for thenext longer increment)012-RP length = 8.14Standard stroke increment = 2.000"Minus desired stroke = - 1.625Stroke difference = .375Twice stroke difference = .750 ...-0.75011.625 length = 7.39"Double Acting CylindersAdd desired stroke length to base length of cylinder.Example: 041.25-DNOTE: Additional charges may be added for smallquantity orders of fractional, nonstandard stroke lengths.Consult your local stocking BIMBA distributor.Bore Size040-D Base Length = 2.97"Plus 1.25" stroke = + 1.25041.25-D length = 4.22Spring Forces (approximate)Heavy SpringRelaxed Compressed Relaxed Compressed(lbs.) (lbs.) (lbs.) (lbs.)5/16" .5 1 – –7/16" 1 2 – –9/16" 2 4 – –3/4" 3 6 4 107/8" 3 6 – –1-1/16" 3 6 6 121-1/4" 7.5 15 – –1-1/2" 7 14 8.5 171-3/4" 11 24 – –2" 15 30 – –NOTES• Heavy spring option may increase cylinder overall length• Spring forces listed are for whole strokes1.8

BimbaOriginal Line – Stainless Steel Body Air CylindersNose Mount Torque ValuesThreadSizeTorque(IN*LB) FT*LBBore Size1/4-28 UNF (27.6) 2.3 5/16" (007)3/8-24 UNF (60) 5 5/16" (007) &7/16" (01)7/16-20 UNF (84) 7 7/16" (01) &9/16" (02)1/2-20 UNF (144) 12 3/4" (04)5/8-18 UNF (336) 28 3/4" (04), 7/8" (06) &1-1/16" (09)3/4-16 UNF (480) 40 3/4" (04), 1-1/16" (09), 1-1/4" (12) &1-1/2" (17)7/8-16 UNF (780) 65 1-1/16" (09), 1-1/4" (12) &1-1/2" (17)1-14 UNS (1200) 100 1-1/2" (17) &1-3/4" (24)11/8-12 UNF (1320) 110 1-1/2" (17) &1-3/4" (24)11/4-12 UNF (1440) 120 2" (31)13/8-12 UNF (1560) 130 2-1/2" (50)11/2-12 UNF (1680) 140 3" (70)PressureRatingOriginal Line, Cushioned Original Line, NR series, Z-line, MRS and hole punchers =250 psi.PC cylinder =100 psi.Bimba 500 Hydraulic =500 psi hydraulic.Reservoirs =250 psi.Switch Track OptionsFor Original Line cylinders, including MRS cylinders, with -T2, T3, and T4 optionsOPTION T2.29OPTION T31.25mm(.050in)OPTION T4.23Switch Track for use with Bimba MR, MS, MSC, and MSK SwitchesMiniature Position Sensing track lengths can now bepurchased separately for field mounting of custom tracklocations.Simply specify the length of track desired after the part number.Mounting recommendations:Bores Part Number List Price Adder per Inch• Clean body with acetone. Remove all oil frombody surface.007 -04 D-74168-A-length $2.90$1.05• Avoid mounting track over rolled construction. 06 -31 D-78527-A-length 2.901.15Locate edge of track 0.175" from rolled50 -70 D-78528-A-length 2.90 1.35construction.Loctite U-05FL or similar adhesive isrecommended (not included).• Use asolid continuous bead of glue for theentire length of track used. Bead should fill center channel of track.• Adhere to recommended cure times as specified by the glue manufacturer.1.9ForTechnical Assistance: 800-442-4622

5/16"Bore Air Cylinders• Ground and Roller Burnished 303 Stainless SteelPiston Rod Standard• Force Exerted Approximately 0.07 of Air Line Pressure• Enclosed Spring Force: .5 lb. Relaxed –1lb.Compressed• Cushion Quiet Bumpers Standard onAll ModelsOPTIONS:(also see Option Combination Availability Chart Page 1.4)• MAGNALUBE G(G) - NO CHARGE• PORTS ROTATED (K)* - NO CHARGE• NOTHREAD (NT) - NO CHARGE*Rod guide port rotated 90° clockwise in BF model.• SIDE PORTED REAR HEAD (Q)Add .20" to nose mount overall lengthEXTRA EXTENSION (EE)• Add $0.75 per inch of extensionDOUBLE ACTING FAILSAFE(JS =Spring Return, JR =Spring Extend)• Add $4.60 to base price + $0.45 to stroke adder• See page 1.65 for overall length addersLOW TEMPERATURE (N)Temperature Range: -40° to 200ºF• Single acting add $0.65• Double acting add $1.25• Reverse acting add $0.95OPTIONS continued…HIGH TEMPERATURE “U” CUPS (V)(overall length does not change)Temperature Range: 0° to 400ºF (-18° to 205ºC)• Single acting add $4.00• Double acting add $10.50• Reverse acting add $7.40ROD WIPER (W)(not available in standard single acting)• Add $2.90MOLYCOATED BODY (F)• Add $2.70 per inch of strokeNON-LUBE SERVICE (E)• Single acting add $3.60• Double acting add $7.75MAGNETIC POSITION SENSING (M)• Add $7.40• Add .15" to overall length• Must specify track(s) for use with Bimba’s miniatureposition sensing (T2, T3, T4) –Add $2.90 per track.See page 1.9 for track location details. See PositionSensing Solutions, page 8.3 for switch selectioninformation.LOW PRESSURE HYDRAULIC (HL)• 250 psi maximum• Double acting models only• Option specified as aprefix• Add $9.20□ Enter Stroke Length as 4th DigitMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS007□$11.05BASE PRICEAdd $2.00 per inch of strokeSingle Acting –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –4"Stainless Steel Rod StandardOptional Accessory:D-26731 Mounting BracketBase Weight: .03Adder Per Inch of Stroke: .02007□ -XP$14.45BASE PRICEAdd $2.00 per inch of stroke007□ -R$16.85BASE PRICEAdd $2.00 per inch of strokeSingle Acting –Spring Return –Double End or Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –4"Stainless Steel Rod StandardOptional Accessories:D-26731 Mounting BracketD-26689 Pivot BracketD-26690 Piston Rod ClevisBase Weight: .04Adder Per Inch of Stroke: .02Reverse Single Acting –Pull Type–Rod Normally Extended –SpringReturn –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3"Maximum Stroke –4"Stainless Steel Rod StandardOptional Accessory:D-26765 Mounting BracketBase Weight: .05Adder Per Inch of Stroke: .03See page 1.8 for length calculation of fractional stroke for single acting cylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.10

5/16"Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS007□ -RP$21.35BASE PRICEAdd $2.00 per inch of strokeReverse Single Acting –Pivot andPull Type –Rod Normally Extended –Spring Return –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3"Maximum Stroke –4"Stainless Steel Rod StandardOptional Accessories:D-26765 Mounting BracketD-26689 Pivot BracketD-26690 Piston Rod ClevisBase Weight: .05Adder Per Inch of Stroke: .03Standard AirCylindersThree-PositionCylindersCushionCylinders007□ -D$15.40BASE PRICEAdd $1.45 per inch of strokeDouble Acting –Air Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –4"Stainless Steel Rod StandardOptional Accessory:D-26765 Mounting BracketBase Weight: .05Adder Per Inch of Stroke: .01.61MRS®CylindersNon-RotatingCylinders007□ -DXP$19.05BASE PRICEAdd $1.45 per inch of strokeBF-007□ -D$23.35BASE PRICEAdd $1.45 per inch of strokeDouble Acting –Air Return –Double End or Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –4"Stainless Steel Rod StandardOptional Accessories:D-26765 Mounting BracketD-26689 Pivot BracketD-26690 Piston Rod ClevisBase Weight: .06Adder Per Inch of Stroke: .01Double Acting –Front BlockMounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –4"Stainless Steel Rod StandardBase Weight: .05Adder Per Inch of Stroke: .01PCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.11 ForTechnical Assistance: 800-442-4622

5/16"Bore Air CylindersD-3229 -A$3.45PACKAGE OF SIX5/16"BoreAccessoriesD-26731$2.40D-26765$2.40Aluminum Alloy Barbed Fitting.1⁄4 "Hose (O.D.) Barbed Fitting Supplied withGasket, No. 10-32 to 1 ⁄4 "O.D. Tubing.D-26689$3.35Mounting Bracket(for Single Acting Models)D-855-A$1.85Mounting Bracket(for Double Acting Models)D-26690$3.35Pivot Bracket with PinD-344$.40Adaptors (10-32 to 1/8 NPT Female)Supplied with GasketD-801$.40Piston Rod Clevis(with Pin)Mounting NutMounting NutAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.12

7/16"Bore Air Cylinders• Ground and Roller Burnished 303 Stainless SteelPiston Rod Standard• Force Exerted Approximately 0.15 of Air Line Pressure• Enclosed Spring Force: 1lb. Relaxed –2lbs.CompressedNO CHARGE:OPTIONS:• MAGNALUBE G(G)• PORTS ROTATED (K) (Not available in block mount)• NOTHREAD (NT)• SIDE PORTED REAR HEAD (Q)Add .19" to nose mount overall length• PIVOT BUSHING (Y).157" ID (Use bracket D-12321-A)SINGLE AND REVERSE ACTING BUMPER (B)• $3.00 additional• Add .062 to overall length; Reverse acting, add .125DOUBLE ACTING BUMPER (B)• $4.20 additional• Add .188 to overall length –DXDE; add .250EXTRA EXTENSION (EE)• Single, reverse and double acting, add $0.90 per inch ofextension• DXDE, add $1.10 per inch of extension; extension added toeach endDOUBLE ACTING FAILSAFE(JS =Spring Return, JR =Spring Extend)• Add $4.60 to base price + $0.45 to stroke adder• See page 1.65 for overall length adders□ Enter Stroke Length as 3rd DigitOPTIONS continued…LOW TEMPERATURE (N)Temperature Range: -40° to 200ºF• Single acting add $0.65• Reverse acting add $0.95• Double acting add $1.25• DXDE add $1.60HIGH TEMPERATURE “U” CUPS (V)Temperature Range: 0° to 400ºF (-18° to 205ºC)• Single acting add $4.20• Double acting add $10.80• DXDE add $14.30• Reverse acting add $7.50MAGNET (prefix M)• Add $8.00• Add 0.25" to Double Acting overall length• Add 0.20" to Single Acting overall length• Must specify track(s) for use with miniature positionsensing (T2, T3, T4) –add $2.90 per track. See page 1.9 fortrack location details. See Position Sensing Solutions,page 8.3 for switch selection information.MOLYCOATED BODY (F)• Add $2.70 per inch of strokeNON-LUBE SERVICE (E)• Single acting add $3.60• Double acting add $8.40• DXDE add $11.90ROD WIPER (W)(not available in standard single acting)• Add $2.90• DXDE add $5.80LOW PRESSURE HYDRAULIC (HL)• 250 psi maximum• Double acting models only• Option specified as aprefix• Add $9.20Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS01□$11.60BASE PRICEAdd $2.25 per inch of stroke01□ -NR$14.40BASE PRICEAdd $2.25 per inch of strokeSingle Acting –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessory:D-775 Mounting BracketBase Weight: .04Adder Per Inch of Stroke: .04Single Acting –Non-rotating –Hexagon Rod –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessory:D-775 Mounting BracketBase Weight: .04Adder Per Inch of Stroke: .04All StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersSee page 1.8 for length calculation of fractional stroke for single acting cylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.13 ForTechnical Assistance: 800-442-4622

7/16"Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS01□ -NRP$17.90BASE PRICEAdd $2.25 per inch of stroke01□ -P$15.25BASE PRICEAdd $2.25 per inch of stroke01□ -R$17.65BASE PRICEAdd $2.25 per inch of stroke01□ -RP$22.05BASE PRICEAdd $2.25 per inch of stroke01□ -D$16.15BASE PRICEAdd $1.65 per inch of strokeSingle Acting –Non-rotatingHexagon Rod –Pivot Type –SpringReturn –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessories:D-850 Rod ClevisD-780 Pivot BracketsBase Weight: .04Adder Per Inch of Stroke: .04Single Acting –Pivot Type –Spring Return –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessories:D-780 Pivot BracketsD-850 Piston Rod ClevisBase Weight: .04Adder Per Inch of Stroke: .04Reverse Single Acting –Pull Type–Rod Normally Extended –SpringReturn –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessory:D-770 Mounting BracketBase Weight: .08Adder Per Inch of Stroke: .03Reverse Single Acting –Pivot andPull Type –Rod Normally Extended –Spring Return –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessories:D-780 Pivot BracketsD-850 Piston Rod ClevisBase Weight: .08Adder Per Inch of Stroke: .03Double Acting –Air Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessory:D-770 Mounting BracketBase Weight: .07Adder Per Inch of Stroke: .02All prices are F.O.B. Monee, Illinois and are subject to change without notice1.14

7/16"Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS01□ -DP$19.50BASE PRICEAdd $1.65 per inch of stroke01□ -DX$19.95BASE PRICEAdd $1.65 per inch of stroke01□ -DXDE$25.50BASE PRICEAdd $2.15 per inch of strokeBF-01□$20.70BASE PRICEAdd $2.25 per inch of strokeDouble Acting –Double End Mount–Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessory:D-770 Mounting BracketBase Weight: .11Adder Per Inch of Stroke: .02Double Acting –Double End Rod –Air Return –Double End MountStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessory:D-770 Mounting BracketBase Weight: .14Adder Per Inch of Stroke: .03MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSBF-01 □ -D$25.00BASE PRICEAdd $1.65 per inch of strokeDouble Acting –Pivot Type –Air Return –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessories:D-780 Pivot BracketsD-850 Piston Rod ClevisBase Weight: .08Adder Per Inch of Stroke: .027/16"BoreBlock Mounted Air CylindersSingle Acting –Front BlockMounting –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardBase Weight: .07Adder Per Inch of Stroke: .04Double Acting –Front BlockMounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –12"Stainless Steel Rod StandardBase Weight: .07Adder Per Inch of Stroke: .02Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.15 ForTechnical Assistance: 800-442-4622

7/16"Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSBR-01□$20.10BASE PRICEAdd $2.25 per inch of strokeBR-01□ -D$24.60BASE PRICEAdd $1.65 per inch of stroke7/16"BoreBlock Mounted Air Cylinders (continued)Double Acting –Rear BlockMounting for Vertical Positioning –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –12"Stainless Steel Rod StandardBase Weight: .08Adder Per Inch of Stroke: .027/16"BoreTrunnion Mounted Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSBFT-01□$28.30BASE PRICEAdd $2.25 per inch of strokeSingle Acting –Rear BlockMounting for Vertical Positioning –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardBase Weight: .05Adder Per Inch of Stroke: .04Single Acting –Front BlockTrunnion Mounting –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessories:TRB-1 Trunnion BracketsD-850 Rod ClevisBase Weight: .09Adder Per Inch of Stroke: .04BFT-01□ -D$32.65BASE PRICEAdd $1.65 per inch of strokeBRT-01□$27.70BASE PRICEAdd $2.25 per inch of strokeDouble Acting –Front BlockTrunnion Mounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessories:TRB-1 Trunnion BracketsD-850 Rod ClevisBase Weight: .09Adder Per Inch of Stroke: .02Single Acting –Rear BlockTrunnion Mounting –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessories:TRB-1 Trunnion BracketsD-850 Rod ClevisBase Weight: .07Adder Per Inch of Stroke: .04All prices are F.O.B. Monee, Illinois and are subject to change without notice1.16

7/16"Bore Air Cylinders7/16"BoreTrunnion Mounted Air Cylinders (continued)MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSStandard AirCylindersBRT-01□ -D$32.00BASE PRICEAdd $1.65 per inch of strokeDouble Acting –Rear BlockTrunnion Mounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessories:TRB-1 Trunnion BracketsD-850 Rod ClevisBase Weight: .10Adder Per Inch of Stroke: .02Three-PositionCylindersCushionCylindersD-775$2.857/16"BoreAccessoriesD-770$3.05D-780$3.15MRS®CylindersNon-RotatingCylindersMounting Bracket(for Single Acting Models)TRB-1$9.15Mounting Bracket(for Double Acting Models)D-3229- A$3.45PACKAGE OF SIXPivot BracketsD-850$3.45PCCylindersAll StainlessNon-RepairableAll StainlessRepairableTrunnion BracketsAnodized Aluminum Alloy Barbed Fitting. 1 ⁄4 "Hose (O.D.) Barbed Fitting Supplied withGasket, No. 10-32 to 1 ⁄4 "O.D. Tubing.Piston Rod ClevisZLine AirCylindersD-855-A$1.85D-801$.40D-154$.40Rod LockCylindersAdaptors (10-32 to 1 ⁄8 NPT Female)Supplied with GasketMounting NutMounting Nut500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.17 ForTechnical Assistance: 800-442-4622

9/16"Bore Air Cylinders• Ground and Roller Burnished 303 Stainless SteelPiston Rod Standard• Force Exerted Approximately 0.25 of Air Line Pressure• Enclosed Spring Force: 2lbs. Relaxed –4lbs.CompressedNO CHARGE:OPTIONS:• MAGNALUBE G(G)• PORTS ROTATED (K)• NOTHREAD (NT)• SIDE PORTED REAR HEAD (Q)Add .03" to nose mount overall lengthSINGLE AND REVERSE ACTING BUMPER (B)• $3.00 additional• Add .062 to overall lengthDOUBLE ACTING BUMPERS (B)• $4.20 additional• Add .125 to overall lengthEXTRA EXTENSION (EE)• Single, reverse and double acting, add $0.90 per inch ofextension• DXDE, add $1.15 per inch of extension; extension added toeach endDOUBLE ACTING FAILSAFE(JS =Spring Return, JR =Spring Extend)•Add $5.10 to base price + $0.60 to stroke adder•See page 1.65 for overall length adders□ Enter Stroke Length as 3rd DigitOPTIONS continued…MAGNET (prefix M)–Add $9.60• Single and reverse acting add .125" to overall length• Must specify track(s) for use with miniature position sensing(T2, T3, T4) –add $2.90 per track. See page 1.9 for tracklocation details. See Position Sensing Solutions, page 8.3 forswitch selection information.LOW TEMPERATURE (N)Temperature Range: -40° to 200ºF• Single acting add $0.65• Reverse acting add $0.95• Double acting add $1.25• DXDE add $1.60HIGH TEMPERATURE “U” CUPS (V)Temperature Range: 0° to 400ºF (-18° to 205ºC)• Single acting add $4.20• Double acting add $10.80• Double end rod add $14.30• Reverse acting add $7.50MOLYCOATED BODY (F)• Add $2.70 per inch of strokeNON-LUBE SERVICE (E)• Single acting add $3.60• Double acting add $8.40• DXDE add $11.90ROD WIPER (W)(not available in standard single acting)• Add $2.90• DXDE add $5.80LOW PRESSURE HYDRAULIC (HL)• 250 psi maximum• Double acting models only• Option specified as aprefix• Add $9.20MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS02□$12.40BASE PRICEAdd $2.25 per inch of strokeSingle Acting –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessory:D-770 Mounting BracketBase Weight: .06Adder Per Inch of Stroke: .0502□ -NR$15.15BASE PRICEAdd $2.25 per inch of strokeSingle Acting –Non-rotatingHexagon Rod –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessory:D-770 Mounting BracketBase Weight: .06Adder Per Inch of Stroke: .05See page 1.8 for length calculation of fractional stroke for single acting cylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.18

9/16"Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS02□ -NRP$19.05BASE PRICEAdd $2.25 per inch of strokeSingle Acting –Non-rotatingHexagon Rod –Pivot Type –SpringReturn –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessories:D-850 Rod ClevisD-12321-A Pivot BracketBase Weight: .06Adder Per Inch of Stroke: .05Standard AirCylindersThree-PositionCylindersCushionCylinders02□ -P$16.15BASE PRICEAdd $2.25 per inch of stroke02□ -R$18.75BASE PRICEAdd $2.25 per inch of stroke02□ -RP$22.60BASE PRICEAdd $2.25 per inch of stroke02□ -D$16.50BASE PRICEAdd $1.65 per inch of strokeSingle Acting –Pivot Type –Spring Return –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessories:D-850 Rod ClevisD-12321-A Pivot BracketBase Weight: .06Adder Per Inch of Stroke: .05Reverse Single Acting –Pull Type–Rod Normally Extended –SpringReturn –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessory:D-770 Mounting BracketBase Weight: .08Adder Per Inch of Stroke: .04Reverse Single Acting –Pivot andPull Type –Rod Normally Extended –Spring Return –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessories:D-850 Rod ClevisD-12321-A Pivot BracketBase Weight: .08Adder Per Inch of Stroke: .04Double Acting –Air Return –FrontNose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessory:D-770 Mounting BracketBase Weight: .09Adder Per Inch of Stroke: .02MRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.19 ForTechnical Assistance: 800-442-4622

9/16"Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS02□ -DXP$20.10BASE PRICEAdd $1.65 per inch of stroke02□ -DXDE$27.10BASE PRICEAdd $2.15 per inch of strokeDouble Acting –Double End orRear Pivot Mounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessories:D-770 Mounting BracketD-850 Rod ClevisD-12321-A Pivot BracketBase Weight: .09Adder Per Inch of Stroke: .02Double Acting –Double End Rod –Air Return –Double End MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessory:D-770 Mounting BracketBase Weight: .16Adder Per Inch of Stroke: .03D-770$3.059/16"BoreAccessoriesD-850$3.45D-12321-A$3.75Mounting BracketD-154$.40Piston Rod ClevisPivot Bracket with PinMounting NutNote: For stainless steel accessories see page 1.99 and 1.102-1.103.All prices are F.O.B. Monee, Illinois and are subject to change without notice1.20

3/4" Bore Air Cylinders• Ground and Polished, High Strength Carbon SteelPiston Rod Standard –303 Stainless Steel RodAvailable as an Option –Bronze Rod Guide BushingStandard• Force Exerted Approximately 0.4 of Air Line Pressure• Enclosed Spring Force: 3lbs. Relaxed –6lbs.Compressed• Rod Wipers Available on D, DP, DXP and DXDEModelsNO CHARGE:04□$12.85BASE PRICEAdd $2.25 per inch of strokeOPTIONS:• MAGNALUBE G(G)• PORTS ROTATED (K)• NOTHREAD (NT)• SIDE PORTED REAR HEAD (Q)Add .44" to nose mount overall length• PIVOT BUSHING (Y).250" IDSINGLE AND REVERSE ACTING BUMPER (B)• $3.00 additional• Add .125 to overall lengthDOUBLE ACTING BUMPERS (B)• $4.20 additional• Nochange in overall lengthEXTRA EXTENSION (EE)• Single, reverse and double acting, add $0.90 per inch ofextension• DXDE, add $1.10 per inch of extension; extension added toeach endDOUBLE ACTING FAILSAFE(JS =Spring Return, JR =Spring Extend)• Add $5.75 to base price + $0.60 to stroke adder• See page 1.65 for overall length adders□ Enter Stroke Length as 3rd DigitROD WIPER (W) (not available in standard single acting)(now available in block mount)• Double acting, add $2.90• DXDE add $5.80HEAVY SPRING (available on single acting andreverse acting) (H)• Add $1.25• Spring Force: 4lbs. relaxed –10lbs. compressedMAGNET (prefix M) –Add $9.60• Single and reverse acting add .125" to overall length• Stainless steel rod becomes standard with this option• Must specify track(s) for use with miniature position sensing(T2, T3, T4) –add $2.90 per track. See page 1.9 for tracklocation details. See Position Sensing Solutions, page 8.3 forswitch selection information.LOW TEMPERATURE (N)Temperature Range: -40° to 200ºF• Single acting add $0.65• Reverse acting add $0.95• Double acting add $1.25• DXDE add $1.60HIGH TEMPERATURE “U” CUPS (V)Temperature Range: 0° to 400ºF (-18° to 205ºC)• Single acting add $4.20• Double acting add $10.80• Double end rod add $14.30• Reverse acting add $7.50MOLYCOATED BODY (F)• Add $2.70 per inch of strokeNON-LUBE SERVICE (E)• Single acting add $3.90• Double acting add $8.65•DXDE add $12.25OPTIONS continued…STAINLESS STEEL ROD (prefix SR)• Add $2.10•Standard on Moption, block mount, DXP and DXDEmodelsLOW PRESSURE HYDRAULIC (HL)• 250 psi maximum• Double acting models only• Option specified as aprefix• Add $14.00MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSSingle Acting –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-226 Mounting BracketBase Weight: .10Adder Per Inch of Stroke: .08Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders04□ -NR$15.70BASE PRICEAdd $2.25 per inch of strokeSingle Acting –Non-rotatingHexagon Rod –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-226 Mounting BracketBase Weight: .10Adder Per Inch of Stroke: .08500 HydraulicCylindersHole PunchCylindersSee page 1.8 for length calculation of fractional stroke for single acting cylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.21 ForTechnical Assistance: 800-442-4622

3/4" Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS04□ -NRP$19.50BASE PRICEAdd $2.25 per inch of stroke04□ -P$16.50BASE PRICEAdd $2.25 per inch of stroke04□ -R$18.95BASE PRICEAdd $2.25 per inch of stroke04□ -RP$22.75BASE PRICEAdd $2.25 per inch of stroke04□ -LS orLSC ConduitOutlet*$71.00BASE PRICEAdd $2.25 per inch of stroke*Add $2.05 for Conduit OutletSingle Acting –Non-rotatingHexagon Rod –Pivot Type –SpringReturn –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessories:D-166-3 Piston Rod ClevisD-167 Pivot BracketsBase Weight: .12Adder Per Inch of Stroke: .08Single Acting –Pivot Type –SpringReturn –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessories:D-166-3 Piston Rod ClevisD-167 Pivot BracketsBase Weight: .13Adder Per Inch of Stroke: .08Reverse Single Acting –Pull Type–Rod Normally Extended –SpringReturn –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-129 Mounting BracketBase Weight: .18Adder Per Inch of Stroke: .07Reverse Single Acting –Pivot andPull Type –Rod Normally Extended –Spring Return –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessories:D-166-3 Piston Rod ClevisD-167 Pivot BracketsBase Weight: .18Adder Per Inch of Stroke: .07Single Acting –Built-in Midget 3-Way Solenoid Operated Valve –Spring Return –Front Nose Mounting–150 PSI, 3 ⁄64" OrificeStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodStandard Voltage –115/60Optional Voltages:24, 230 A.C. or 6, 12, 24 D.C.Optional Accessory:D-226 Mounting BracketBase Weight: .38Adder Per Inch of Stroke: .08All prices are F.O.B. Monee, Illinois and are subject to change without notice1.22

3/4" BoreAir CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS04□ -NRLS orNRLSCConduitOutlet*$74.20BASE PRICEAdd $2.25 per inch of stroke*Add $2.05 for Conduit Outlet04□ -D$16.60BASE PRICEAdd $1.65 per inch of strokeSingle Acting –Non-rotatingHexagon Piston Rod –Built-inMidget 3-Way Solenoid OperatedValve –Spring Return –Front NoseMounting –150 PSI, 3 ⁄64" OrificeStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodStandard Voltage –115/60Optional Voltages:24, 230 A.C. or 6, 12, 24 D.C.Optional Accessory:D-226 Mounting BracketBase Weight: .46Adder Per Inch of Stroke: .08Double Acting –Air Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Stainless Steel RodOptional Rod WiperOptional Accessory:D-129 Mounting BracketBase Weight: .21Adder Per Inch of Stroke: .03Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylinders04□ -DP$20.00BASE PRICEAdd $1.65 per inch of stroke04□ -DXP$22.20BASE PRICEAdd $1.65 per inch of strokeDouble Acting –Pivot Type –Air Return –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6",7", 8", 9", 10", 11", 12"Maximum Stroke –32"Optional Stainless Steel RodOptional Rod WiperOptional Accessories:D-166-3 Piston Rod ClevisD-167 Pivot BracketsBase Weight: .21Adder Per Inch of Stroke: .03Double Acting –Double End orRear Pivot Mounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6",7", 8", 9", 10", 11", 12"Maximum Stroke –32"Stainless Steel Rod StandardOptional Rod WiperOptional Accessories:D-129 Mounting BracketD-13498-A Pivot BracketD-166-3 Piston Rod ClevisBase Weight: .29Adder Per Inch of Stroke: .03All StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.23 ForTechnical Assistance: 800-442-4622

3/4" BoreAir CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS04□ -DXDE$31.00BASE PRICEAdd $2.15 per inch of strokeBF-04□$22.35BASE PRICEAdd $2.25 per inch of strokeDouble Acting –Double End Rod –Air Return –Double End MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Rod WiperOptional Accessory:D-129 Mounting BracketBase Weight: .37Adder Per Inch of Stroke: .043/4" BoreBlock MountedMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSSingle Acting –Front BlockMounting –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardBase Weight: .18Adder Per Inch of Stroke: .08BF-04□ -D$26.25BASE PRICEAdd $1.65 per inch of strokeBF-04□ -R$28.15BASE PRICEAdd $2.25 per inch of strokeDouble Acting –Front BlockMounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardBase Weight: .22Adder Per Inch of Stroke: .03Pull Type –Front Block Mounting –Rod Normally Extended –ReverseSingle Acting –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardBase Weight: .19Adder Per Inch of Stroke: .07All prices are F.O.B. Monee, Illinois and are subject to change without notice1.24

3/4" Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSBF-04□ -LSor LSC*$80.95BASE PRICEAdd $2.25 per inch of stroke*Add $2.05 for Conduit OutletBR-04□$22.35BASE PRICEAdd $2.25 per inch of strokeBR-04□ -D$25.70BASE PRICEAdd $1.65 per inch of strokeBR-04□ -R$28.15BASE PRICEAdd $2.25 per inch of stroke3/4" BoreBlock Mounted (continued)Built-in Midget 3-Way SolenoidOperated Valve –Single Acting –Spring Return –Front BlockMounting –150 PSI, 3 ⁄64" OrificeStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardStandard Voltage –115/60Optional Voltages:24, 230 A.C. or 6, 12, 24 D.C.Base Weight: .38Adder Per Inch of Stroke: .08Single Acting –Rear BlockMounting for Vertical Positioning –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardBase Weight: .15Adder Per Inch of Stroke: .08Double Acting –Rear BlockMounting for Vertical Positioning –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardBase Weight: .26Adder Per Inch of Stroke: .08Pull Type –Rear Block Mounting forVertical Positioning –Rod NormallyExtended –Reverse Single Acting –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardBase Weight: .15Adder Per Inch of Stroke: .08Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.25 ForTechnical Assistance: 800-442-4622

BFT-04□$30.85BASE PRICEAdd $2.25 per inch of stroke3/4" Bore Air Cylinders3/4" BoreTrunnion MountedMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSSingle Acting –Front BlockTrunnion Mounting –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessories:TRB-2 Trunnion BracketsD-166-3 Rod ClevisBase Weight: .24Adder Per Inch of Stroke: .08BFT-04□ -D$34.65BASE PRICEAdd $1.65 per inch of StrokeBRT-04□$28.80BASE PRICEAdd $2.25 per inch of strokeBRT-04□ -D$32.50BASE PRICEAdd $1.65 per inch of strokeDouble Acting –Front BlockTrunnion Mounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessories:TRB-2 Trunnion BracketsD-166-3 Rod ClevisBase Weight: .29Adder Per Inch of Stroke: .03Single Acting –Rear Block TrunnionMounting –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessories:TRB-2 Trunnion BracketsD-166-3 Rod ClevisBase Weight: .19Adder Per Inch of Stroke: .08Double Acting –Rear BlockTrunnion Mounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessories:TRB-2 Trunnion BracketsD-166-3 Rod ClevisBase Weight: .28Adder Per Inch of Stroke: .03All prices are F.O.B. Monee, Illinois and are subject to change without notice1.26

3/4" Bore Air Cylinders3/4" BoreAdjustable StrokeMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSStandard AirCylinders04□ -A$25.85BASE PRICEAdd $2.25 per inch of stroke04□ -RA$26.90BASE PRICEAdd $2.25 per inch of Stroke04□ -AP$25.45BASE PRICEAdd $2.25 per inch of strokeSingle Acting –Spring Return –Adjustable Stroke –Double EndMounting –Brass Piston RodBearing and Stroke Adjustment in1", 2", 3". Mounting Brackets areincluded.1" Stroke Adjusts 0" –1", 2" Stroke1" –2", and 3" Stroke 2" –3"Maximum Stroke –6"Optional Stainless Steel RodBase Weight: .40Adder Per Inch of Stroke: .07Reverse Single Acting –Pull Type–Rod Normally Extended –NoseMounting –Stroke Adjustment in1", 2", 3".1" Stroke Adjusts 0" –1", 2" Stroke1" –2", and 3" Stroke 2" –3"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-129 Mounting BracketBase Weight: .23Adder Per Inch of Stroke: .07Single Acting –Pivot Type –RearPivot Mounting –Stroke Adjustmentin 1", 2", 3".1" Stroke Adjusts 0" –1", 2" Stroke1" –2", and 3" Stroke 2" –3"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessories:D-166-3 Piston Rod ClevisD-167 Pivot BracketsBase Weight: .23Adder Per Inch of Stroke: .07Three-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.27 ForTechnical Assistance: 800-442-4622

3/4" BoreAir CylindersD-226$2.703/4" BoreAccessoriesD-129$3.40D-167$3.15Mounting Bracket(for Single Acting Models)D-13498-A$3.70Mounting Bracket(for Double Acting Models)TRB- 2$11.30Pivot BracketsD-166-3$3.70Pivot BracketD-9$.50Trunnion BracketsD-98$.50Piston Rod ClevisMounting NutMounting NutNote: For stainless steel accessories see page 1.99 and 1.102-1.103.All prices are F.O.B. Monee, Illinois and are subject to change without notice1.28

7/8" Bore Air Cylinders• Ground and Polished, High Strength Carbon SteelPiston Rod Standard –303 Stainless Steel RodAvailable as an Option –Bronze Rod Guide BushingStandard• Force Exerted Approximately 0.6 of Air Line Pressure• Enclosed Spring Force: 3lbs. Relaxed –6lbs.Compressed• Cushion Quiet Bumpers Standard onAll ModelsOPTIONS:NO CHARGE:• MAGNALUBE G(G)• PORTS ROTATED (K)• NOTHREAD (NT)• SIDE PORTED REAR HEAD (Q)Add .28" to nose mount overall length• PIVOT BUSHING (Y).250" IDEXTRA EXTENSION (EE)• Single, reverse and double acting, add $0.90 per inchof extension• DXDE, add $1.10 per inch of extension; extensionadded to each endDOUBLE ACTING FAILSAFE(JS =Spring Return, JR =Spring Extend)• Add $5.75 to base price + $0.60 to stroke adder• See page 1.65 for overall length addersMAGNET (prefix M) –Add $9.60• All models add .125" to overall length• Stainless steel rod becomes standard with this option• Must specify track(s) for use with miniature positionsensing (T2, T3, T4) –add $2.90 per track. See page1.9 for track location details. See Position SensingSolutions, page 8.3 for switch selection information.OPTIONS continued…LOW TEMPERATURE (N)Temperature Range: -40° to 200ºF• Single acting add $0.65• Reverse acting add $0.95• Double acting add $1.25• DXDE add $1.60HIGH TEMPERATURE “U” CUP SEALS (V)Temperature Range: 0° to 400ºF (-18° to 205ºC)• Single acting add $4.70• Double acting add $12.05• DXDE add $15.25• Reverse acting add $8.05MOLYCOATED BODY (F)• Add $2.70 per inch of strokeNON-LUBE SERVICE (E)• Single acting add $3.90• Double acting add $8.95• DXDE add $12.80ROD WIPER (W)(not available in standard single acting)• Add $2.90• DXDE add $5.80STAINLESS STEEL ROD (prefix SR)• Add $2.10• Standard on DXP, DXDE, and MoptionLOW PRESSURE HYDRAULIC (HL)• 250 psi maximum• Double acting models only• Option specified as aprefix• Add $14.00□ Enter Stroke Length as 3rd DigitStandard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS06□$13.75BASE PRICEAdd $2.55 per inch of stroke06□ -NR$16.25BASE PRICEAdd $2.55 per inch of strokeSingle Acting –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-129 Mounting BracketBase Weight: .17Adder Per Inch of Stroke: .09Single Acting –Non-rotatingHexagon Rod –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-129 Mounting BracketBase Weight: .17Adder Per Inch of Stroke: .09All StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersSee page 1.8 for length calculation of fractional stroke for single acting cylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.29 ForTechnical Assistance: 800-442-4622

7/8" Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS06□ -NRP$20.35BASE PRICEAdd $2.55 per inch of stroke06□ -P$17.50BASE PRICEAdd $2.55 per inch of stroke06□ -R$20.30BASE PRICEAdd $2.55 per inch of stroke06□ -RP$24.00BASE PRICEAdd $2.55 per inch of stroke06□ -D$18.20BASE PRICEAdd $1.65 per inch of strokeSingle Acting –Non-rotatingHexagon Rod –Pivot Type –SpringReturn –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessories:D-166-3 Piston Rod ClevisD-167 Pivot BracketsBase Weight: .17Adder Per Inch of Stroke: .09Single Acting –Pivot Type –SpringReturn –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessories:D-166-3 Piston Rod ClevisD-167 Pivot BracketsBase Weight: .17Adder Per Inch of Stroke: .09Reverse Single Acting –Pull Type–Rod Normally Extended –FrontNose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-129 Mounting BracketBase Weight: .20Adder Per Inch of Stroke: .09Reverse Single Acting –Pivot andPull Type –Rod Normally Extended –Spring Return –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessories:D-166-3 Piston Rod ClevisD-167 Pivot BracketsBase Weight: .20Adder Per Inch of Stroke: .09Double Acting –Air Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Stainless Steel RodOptional Accessory:D-129 Mounting BracketBase Weight: .25Adder Per Inch of Stroke: .03All prices are F.O.B. Monee, Illinois and are subject to change without notice1.30

7/8" BoreAir CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS06□ -DXP$24.05BASE PRICEAdd $1.65 per inch of strokeDouble Acting –Double End orRear Pivot Mounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7",8", 9", 10", 11", 12"Maximum Stroke –32"Stainless Steel Rod StandardOptional Accessories:D-166-3 Piston Rod ClevisD-129 Mounting BracketD-13498-A Pivot BracketBase Weight: .32Adder Per Inch of Stroke: .03Standard AirCylindersThree-PositionCylindersCushionCylinders06□ -DXDE$32.60BASE PRICEAdd $2.15 per inch of strokeDouble Acting –Double End Rod –Air Return –Double End MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessory:D-129 Mounting BracketBase Weight: .39Adder Per Inch of Stroke: .06MRS®CylindersNon-RotatingCylindersPCCylindersD-129$3.407/8" BoreAccessoriesD-13498-A$3.70D-167$3.15All StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersMounting BracketD-166- 3$3.70Pivot BracketD-9$.50Pivot BracketsRod LockCylinders500 HydraulicCylindersRod ClevisMounting NutHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.31 ForTechnical Assistance: 800-442-4622

1-1/16" Bore Air Cylinders• Ground and Polished, High Strength Carbon SteelPiston Rod Standard –303 Stainless Steel RodAvailable as an Option –Bronze Rod Guide BushingStandard• Force Exerted Approximately 0.9 of Air Line Pressure• Enclosed Spring Force: 3lbs. Relaxed –6lbs.Compressed• Rod Wipers Available on D, DP, DXand DXDEModelsNO CHARGE:OPTIONS:• MAGNALUBE G(G)• PORTS ROTATED (K)** Front port rotated 90° on BF-090-D.• NOTHREAD (NT)• SIDE PORTED REAR HEAD (Q)Add .25" to nose mount overall length• PIVOT BUSHING (Y).250" IDSINGLE AND REVERSE ACTING BUMPER (B)• $3.00 additional• Add .125 to overall lengthDOUBLE ACTING BUMPERS (B)• $4.20 additional• Add .125 to overall length• Models DXDE and DXDEH add .500EXTRA EXTENSION (EE)• Single, reverse and double acting, add $0.90 per inch ofextension• DXDE, add $1.10 per inch of extension; extension added toeach end• DXDE hollow rod, add $1.65 per inch of extension; extensionadded to each endDOUBLE ACTING FAILSAFE(JS =Spring Return, JR =Spring Extend)• Add $8.00 to base price + $1.05 to stroke adder• See page 1.65 for overall length addersHEAVY SPRINGS (H) are standard on all single acting blockfront and block rear mount and –NRLSC models, and reverseacting except –RA type.For all other single acting, add $1.90• Spring Force: 6lbs. relaxed –12lbs. compressedOPTIONS continued…MAGNET (prefix M) –Add $12.00• Single acting and DXDE add .125" to overall length• Use bumper length adder for DXDE and DXDEH when magnetand bumper are ordered together.• Stainless steel rod becomes standard with this option• Must specify track(s) for use with miniature position sensing(T2, T3, T4) –add $2.90 per track. See page 1.9 for tracklocation details. See Position Sensing Solutions, page 8.3 forswitch selection information.LOW TEMPERATURE (N)Temperature Range: -40° to 200ºF• Single acting add $0.95• Reverse acting add $1.25• Double acting add $1.85• DXDE add $2.45HIGH TEMPERATURE “U” CUPS (V)Temperature Range: 0° to 400ºF (-18° to 205ºC)• Single acting add $5.45• Double acting add $12.95• DXDE add $16.40• Reverse acting add $8.45ROD WIPER (W)(not available in standard single acting)(now available in block mount)• Double acting, add $2.90• DXDE add $5.80MOLYCOATED BODY (F)• Add $2.70 per inch of strokeNON-LUBE SERVICE (E)• Single acting add $3.90• Double acting add $9.55• DXDE add $13.45STAINLESS STEEL ROD (prefix SR)• Add $2.10• Standard on DX, DXDE, DXDEH, All block mountingsand MoptionLOW PRESSURE HYDRAULIC (HL)• 250 psi maximum• Double acting models only• Option specified as aprefix• Add $14.00□ Enter Stroke Length as 3rd DigitMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS09□$14.45BASE PRICEAdd $2.80 per inch of stroke09□ -NR$17.00BASE PRICEAdd $2.80 per inch of strokeSingle Acting –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-129 Mounting BracketBase Weight: .23Adder Per Inch of Stroke: .11Single Acting –Non-rotatingHexagon Rod –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-129 Mounting BracketBase Weight: .25Adder Per Inch of Stroke: .12See page 1.8 for length calculation of fractional stroke for single acting cylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.32

1-1/16"Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS09□ -NRP$20.95BASE PRICEAdd $2.80 per inch of stroke09□ -P$18.00BASE PRICEAdd $2.80 per inch of strokeSingle Acting –Non-rotatingHexagon Rod –Pivot Type –SpringReturn –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessories:D-166-1 Piston Rod ClevisD-167 Pivot BracketsBase Weight: .25Adder Per Inch of Stroke: .12Single Acting –Pivot Type –Spring Return –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessories:D-166-1 Piston Rod ClevisD-167 Pivot BracketsBase Weight: .24Adder Per Inch of Stroke: .11Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylinders09□ -R$21.05BASE PRICEAdd $2.80 per inch of stroke09□ -RP$25.00BASE PRICEAdd $2.80 per inch of strokeReverse Single Acting –Pull Type–Rod Normally Extended –SpringReturn –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-129 Mounting BracketBase Weight: .24Adder Per Inch of Stroke: .16Reverse Single Acting –Pivot andPull Type –Rod Normally Extended –Spring Return –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessories:D-166-1 Piston Rod ClevisD-167 Pivot BracketsBase Weight: .22Adder Per Inch of Stroke: .16PCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.33 ForTechnical Assistance: 800-442-4622

1-1/16"Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS09□ -S or SC*$70.10BASE PRICEAdd $2.80 per inch of stroke*Add $2.70 for Conduit Outlet09□ -NRS orNRSC*$73.10BASE PRICEAdd $2.80 per inch of stroke*Add $2.70 for Conduit Outlet09□ -LS orLSC*$73.20BASE PRICEAdd $2.80 per inch of stroke*Add $2.05 for Conduit OutletSingle Acting –Built-in 3-WaySolenoid Operated Valve –SpringReturn –Front Nose Mounting –100PSI, 1 ⁄16" Orifice Standard –150 PSI,3⁄64" Orifice OptionalStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodStandard Voltage –115/60Optional Voltages:24, 230 A.C. or 6, 12, 24 D.C.Optional Accessory:D-129 Mounting BracketBase Weight: 1.11Adder Per Inch of Stroke: .11Single Acting –Built-in 3-WaySolenoid Operated Valve –NonrotatingHexagon Piston Rod –Spring Return –Front Nose Mounting–100 PSI, 1 ⁄16" Orifice Standard –150PSI, 3 ⁄64" Orifice OptionalStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodStandard Voltage –115/60Optional Voltages:24, 230 A.C. or 6, 12, 24 D.C.Optional Accessory:D-129 Mounting BracketBase Weight: 1.13Adder Per Inch of Stroke: .12Single Acting –Built-in Midget3-Way Solenoid Operated Valve –Spring Return –Front Nose Mounting–150 PSI, 3 ⁄64" OrificeStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodStandard Voltage –115/60Optional Voltages:24, 230 A.C. or 6, 12, 24 D.C.Optional Accessory:D-129 Mounting BracketBase Weight: 1.20Adder Per Inch of Stroke: .11All prices are F.O.B. Monee, Illinois and are subject to change without notice1.34

1-1/16"Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS09□ -NRLS orNRLSC*$75.80BASE PRICEAdd $2.80 per inch of stroke*Add $2.05 for Conduit Outlet09□ -D$19.35BASE PRICEAdd $1.65 per inch of stroke09□ -DP$23.20BASE PRICEAdd $1.65 per inch of strokeSingle Acting –Non-rotatingHexagon Piston Rod –Built-inMidget 3-Way Solenoid OperatedValve –Spring Return –Front NoseMounting –150 PSI, 3 ⁄64" OrificeStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodStandard Voltage –115/60Optional Voltages:24, 230 A.C. or 6, 12, 24 D.C.Optional Accessory:D-129 Mounting BracketBase Weight: 1.20Adder Per Inch of Stroke: .11Double Acting –Air Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Stainless Steel RodOptional Rod WiperOptional Accessory:D-129 Mounting BracketBase Weight: .33Adder Per Inch of Stroke: .05Double Acting –Pivot Type –Air Return –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7",8", 9", 10", 11", 12"Maximum Stroke –32"Optional Stainless Steel RodOptional Rod WiperOptional Accessories:D-166-1 Piston Rod ClevisD-167 Pivot BracketBase Weight: .33Adder Per Inch of Stroke: .05Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairable09□ -DX$25.40BASE PRICEAdd $1.65 per inch of strokeDouble Acting –UniversalMounting Pivot, or Double EndMounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7",8", 9", 10", 11", 12"Maximum Stroke –32"Stainless Steel Rod StandardOptional Rod WiperOptional Accessories:D-13498-A Pivot BracketD-129 Mounting BracketD-166-1 Piston Rod ClevisBase Weight: .33Adder Per Inch of Stroke: .05ZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.35 ForTechnical Assistance: 800-442-4622

1-1/16"Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS09□ -DXDE$33.80BASE PRICEAdd $2.15 per inch of stroke09□ -DXDEH$43.00BASE PRICEAdd $3.10 per inch of strokeDouble Acting –Double End Rod –Air Return –Double End MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 " ,3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Rod WiperOptional Accessory:D-129 Mounting BracketBase Weight: .48Adder Per Inch of Stroke: .07Double Acting –Double EndHollow Rod –Air Return –DoubleEnd MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 " ,3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Rod WiperOptional Accessory:D-129 Mounting BracketBase Weight: .47Adder Per Inch of Stroke: .071-1/16"BoreBlock Mounted •Spring Force: 6lbs. Retracted, 12 lbs. ExtendedMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSBF-09□$28.15BASE PRICEAdd $2.80 per inch of strokeSingle Acting –Front BlockMounting –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardBase Weight: .43Adder Per Inch of Stroke: .11BF-09□ -D$30.20BASE PRICEAdd $1.65 per inch of strokeDouble Acting –Front BlockMounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 " ,3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardBase Weight: .49Adder Per Inch of Stroke: .05All prices are F.O.B. Monee, Illinois and are subject to change without notice1.36

1-1/16"Bore Air CylindersBF-09□ -R$33.20BASE PRICEAdd $2.80 per inch of stroke1-1/16"BoreBlock Mounted (continued)MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSPull Type –Front Block Mounting –Rod Normally Extended –ReverseSingle Acting –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardBase Weight: .36Adder Per Inch of Stroke: .16Standard AirCylindersThree-PositionCylindersCushionCylindersBF-09 □ -LS orLSC*$87.70BASE PRICEAdd $2.80 per inch of stroke*Add $2.05 for Conduit OutletBR-09□$24.20BASE PRICEAdd $2.80 per inch of strokeBR-09□ -D$29.60BASE PRICEAdd $1.65 per inch of strokeBR-09□ -R$29.20BASE PRICEAdd $2.80 per inch of strokeBuilt-in Midget 3-Way SolenoidOperated Valve –Single Acting –Spring Return –Front BlockMounting –150 PSI, 3 ⁄64" OrificeStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardStandard Voltage –115/60Optional Voltages:24, 230 A.C. or 6, 12, 24 D.C.Base Weight: 1.31Adder Per Inch of Stroke: .11Single Acting –Rear BlockMounting for Vertical Positioning –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardBase Weight: .36Adder Per Inch of Stroke: .16Double Acting –Rear BlockMounting for Vertical Positioning –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –12"Stainless Steel Rod StandardBase Weight: .39Adder Per Inch of Stroke: .05Pull Type –Rear Block Mountingfor Vertical Positioning –RodNormally Extended –Reverse SingleActing – Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardBase Weight: .32Adder Per Inch of Stroke: .16MRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.37 ForTechnical Assistance: 800-442-4622

1-1/16"Bore Air Cylinders1-1/16"BoreTrunnion Mounted •Spring Force: 6lbs. Retracted, 13 lbs. ExtendedMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSBFT-09□$36.85BASE PRICEAdd $2.80 per inch of strokeSingle Acting –Front BlockTrunnion Mounting –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessories:TRB-2 Trunnion BracketsD-166-1 Rod ClevisBase Weight: .45Adder Per Inch of Stroke: .11BFT-09□ -D$39.20BASE PRICEAdd $1.65 per inch of strokeBRT-09□$32.80BASE PRICEAdd $2.80 per inch of strokeBRT-09□ -D$38.00BASE PRICEAdd $1.65 per inch of strokeDouble Acting –Front BlockTrunnion Mounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessories:TRB-2 Trunnion BracketsD-166-1 Rod ClevisBase Weight: .49Adder Per Inch of Stroke: .05Single Acting –Rear BlockTrunnion Mounting –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessories:TRB-2 Trunnion BracketsD-166-1 Rod ClevisBase Weight: .37Adder Per Inch of Stroke: .11Double Acting –Rear BlockTrunnion Mounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessories:TRB-2 Trunnion BracketsD-166-1 Rod ClevisBase Weight: .43Adder Per Inch of Stroke: .05All prices are F.O.B. Monee, Illinois and are subject to change without notice1.38

1-1/16"Bore Air Cylinders1-1/16"BoreAdjustable StrokeMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSStandard AirCylinders09□ -A$29.20BASE PRICEAdd $2.80 per inch of strokeSingle Acting –Spring Return –Adjustable Stroke –Double EndMounting –Brass Piston RodBearing and Stroke Adjustment in1", 2", 3".1" Stroke Adjusts 0" –1", 2" Stroke1" –2", and 3" Stroke 2" –3".Mounting brackets are included.Maximum Stroke –6"Optional Stainless Steel RodBase Weight: .58Adder Per Inch of Stroke: .11Three-PositionCylindersCushionCylindersMRS®Cylinders09□ -RA$30.45BASE PRICEAdd $2.80 per inch of stroke09□ -AP$28.70BASE PRICEAdd $2.80 per inch of strokeReverse Single Acting –Pull Type–Rod Normally Extended –SpringForce: 6lbs. Retracted, 3lbs.Extended –Nose Mounting –StrokeAdjustment in 1", 2", 3".1" Stroke Adjusts 0" –1", 2" Stroke1" –2", and 3" Stroke 2" –3".Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-129 Mounting BracketsBase Weight: .41Adder Per Inch of Stroke: .11Single Acting –Pivot Type –RearPivot Mounting –Stroke Adjustmentin 1", 2", 3".1" Stroke Adjusts 0" –1", 2" Stroke1" –2", and 3" Stroke 2" –3".Maximum Stroke –6"Optional Stainless Steel RodOptional Accessories:D-166-1 Piston Rod ClevisD-167 Pivot BracketsBase Weight: .40Adder Per Inch of Stroke: .11Non-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylinders09□ -M$51.65BASE PRICEAdd $2.80 per inch of stroke1-1/16"BoreBuilt-in Manual ValveMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSSingle Acting –Built-in 3-WayManual Valve –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-129 Mounting BracketBase Weight: .45Adder Per Inch of Stroke: .11Rod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.39 ForTechnical Assistance: 800-442-4622

1-1/16"Bore Air Cylinders1-1/16"BoreBuilt-in Manual Valve (continued)MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS09□ -NRM$54.20BASE PRICEAdd $2.80 per inch of strokeD-129$3.40Single Acting –Built-in 3-WayManual Valve –Non-rotatingHexagon Rod –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-129 Mounting BracketBase Weight: .47Adder Per Inch of Stroke: .121-1/16"BoreAccessoriesD-13498-A$3.70D-167$3.15Mounting Bracket(for Single &Double Acting Models)TRB-2$11.30Pivot BracketD-166-1$3.70Pivot BracketsD-9$.50Trunnion BracketsPiston Rod ClevisMounting NutNote: For stainless steel accessories see pages 1.99 and 1.102-1.103.All prices are F.O.B. Monee, Illinois and are subject to change without notice1.40

1-1/4" Bore Air Cylinders• Ground and Polished, High Strength Carbon SteelPiston Rod Standard –303 Stainless Steel RodAvailable as an Option –Bronze Rod Guide BushingStandard• Force Exerted Approximately 1.2 of Air Line Pressure• Enclosed Spring Force: 7.5 lbs. Relaxed –15lbs.Compressed• Cushion Quiet Bumpers StandardNO CHARGE:OPTIONS:• MAGNALUBE G(G)• PORTS ROTATED (K)• NOTHREAD (NT)• SIDE PORTED REAR HEAD (Q)Add .31" to nose mount overall length• PIVOT BUSHING (Y).250" IDEXTRA EXTENSION (EE)• Single, reverse and double acting, add $1.10 per inch ofextension• DXDE, add $1.60 per inch of extension; extension addedto each end• DXDE hollow rod, add $1.70 per inch of extension;extension added to each endDOUBLE ACTING FAILSAFE(JS =Spring Return, JR =Spring Extend)•Add $8.00 to base price + $1.05 to stroke adder•See page 1.65 for overall length adders□ Enter Stroke Length as 3rd DigitOPTIONS continued…MAGNET (prefix M) –Add $12.00• Single and reverse acting add .125" to overall length,• Stainless steel rod becomes standard with this option• Must specify track(s) for use with miniature position sensing(T2, T3, T4) –add $2.90 per track. See page 1.9 for tracklocation details. See Position Sensing Solutions, page 8.3 forswitch selection information.LOW TEMPERATURE (N)Temperature Range: -40° to 200ºF• Single acting add $0.95• Reverse acting add $1.25• Double acting add $1.85• DXDE add $2.45HIGH TEMPERATURE “U” CUPS (V)Temperature Range: 0° to 400ºF (-18° to 205ºC)• Single acting add $5.75• Double acting add $14.30• DXDE add $18.30• Reverse acting add $9.85MOLYCOATED BODY (F)• Add $2.70 per inch of strokeNON-LUBE SERVICE (E)• Single acting add $3.90• Double acting add $9.55• DXDE add $13.45STAINLESS STEEL ROD (prefix SR)• Add $3.00• Standard on DXDE, DXDEH and MoptionROD WIPER (W)(not available in standard single acting)• Add $2.90• DXDE add $5.80LOW PRESSURE HYDRAULIC (HL)• 250 psi maximum• Double acting models only• Option specified as aprefix• Add $14.00Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS12□$23.35BASE PRICEAdd $3.60 per inch of stroke12□ -NR$26.20BASE PRICEAdd $3.60 per inch of strokeSingle Acting –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-241 Mounting BracketBase Weight: .39Adder Per Inch of Stroke: .21Single Acting –Non-rotatingHexagon Rod –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-241 Mounting BracketBase Weight: .41Adder Per Inch of Stroke: .20All StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersSee page 1.8 for length calculation of fractional stroke for single acting cylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.41 ForTechnical Assistance: 800-442-4622

1-1/4" Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS12□ -NRP$31.80BASE PRICEAdd $3.60 per inch of stroke12□ -P$28.80BASE PRICEAdd $3.60 per inch of stroke12□ -R$30.45BASE PRICEAdd $3.60 per inch of stroke12□ -RP$32.70BASE PRICEAdd $3.60 per inch of strokeSingle Acting –Non-rotatingHexagon Rod –Pivot Type –SpringReturn –Rear Pivot or Double EndMountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessories:D-231-1 Piston Rod ClevisD-1360 Pivot BracketsBase Weight: .41Adder Per Inch of Stroke: .20Single Acting –Pivot Type –SpringReturn –Rear Pivot or Double EndMountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessories:D-231-1 Piston Rod ClevisD-1360 Pivot BracketsBase Weight: .53Adder Per Inch of Stroke: .21Reverse Single Acting –Pull Type–Rod Normally Extended –SpringReturn –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-241 Mounting BracketBase Weight: .50Adder Per Inch of Stroke: .21Reverse Single Acting –Pivot andPull Type –Rod Normally Extended –Spring Return –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessories:D-231-1 Piston Rod ClevisD-1360 Pivot BracketBase Weight: .57Adder Per Inch of Stroke: .21All prices are F.O.B. Monee, Illinois and are subject to change without notice1.42

1-1/4" Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS12□ -LS orLSC*$81.55BASE PRICEAdd $3.60 per inch of stroke*Add $2.05 for Conduit Outlet12□ -NRLS orNRLSC*$84.80BASE PRICEAdd $3.60 per inch of stroke*Add $2.05 for Conduit Outlet12□ -D$29.80BASE PRICEAdd $2.15 per inch of stroke12□ -DP$35.45BASE PRICEAdd $2.15 per inch of strokeSingle Acting –Built-in Midget3-Way Solenoid Operated Valve –Spring Return –Front NoseMounting –150 PSI, 3 ⁄64" OrificeStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodStandard Voltage –115/60Optional Voltages:24, 230 A.C. or 6, 12, 24 D.C.Optional Accessory:D-241 Mounting BracketBase Weight: 1.30Adder Per Inch of Stroke: .21Single Acting –Non-rotatingHexagon Piston Rod –Built-inMidget 3-Way Solenoid OperatedValve –Spring Return –Front NoseMounting –150 PSI, 3 ⁄64" OrificeStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodStandard Voltage –115/60Optional Voltages:24, 230 A.C. or 6, 12, 24 D.C.Optional Accessory:D-241 Mounting BracketBase Weight: 1.30Adder Per Inch of Stroke: .21Double Acting –Air Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Stainless Steel RodOptional Accessory:D-241 Mounting BracketBase Weight: .58Adder Per Inch of Stroke: .08Double Acting –Pivot Type –Air Return –Rear Pivot or DoubleEnd MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7",8", 9", 10", 11", 12"Maximum Stroke –32"Optional Stainless Steel RodOptional Accessories:D-231-1 Piston Rod ClevisD-1360 Pivot BracketsD-241 Mounting BracketBase Weight: .71Adder Per Inch of Stroke: .08Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.43 ForTechnical Assistance: 800-442-4622

1-1/4" Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS12□ -DXDE$50.40BASE PRICEAdd $3.10 per inch of strokeDouble Acting –Double End Rod –Air Return –Double End MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7",8", 9", 10", 11", 12"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessory:D-241 Mounting BracketBase Weight: .98Adder Per Inch of Stroke: .1212□ -DXDEH$55.80BASE PRICEAdd $3.30 per inch of strokeD-241$5.20Double Acting –Double EndHollow Rod –Air Return –DoubleEnd MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessory:D-241 Mounting BracketBase Weight: .97Adder Per Inch of Stroke: .121-1/4" BoreAccessoriesD-1360$6.80D-231-1$5.95Mounting Bracket(for Single &Double Acting Models)D-3556$.80Pivot BracketsPiston Rod ClevisMounting NutAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.44

1-1/2" Bore Air Cylinders• Ground and Polished, High Strength Carbon SteelPiston Rod Standard –303 Stainless Steel RodOptional –Bronze Rod Guide Bushing Standard• Force Exerted Approximately 1.7 of Air LinePressure• Enclosed Spring Force: 7lbs. Relaxed –14lbs.Compressed• Rod Wipers Available on D, DP, DX, DXDE, andDXDEH Models□ Enter Stroke Length as 3rd Digit17□$26.10BASE PRICEAdd $4.15 per inch of strokeOPTIONS:NO CHARGE:• MAGNALUBE G(G)• PORTS ROTATED (K)** Front port rotated 90° on BF models.• NOTHREAD (NT)• SIDE PORTED REAR HEAD (Q)Add .19" to nose mount overall length and DNR; BF and BFTadd .38"• PIVOT BUSHING (Y).375" ID (use D-620-1 pivot bracket)SINGLE AND REVERSE ACTING BUMPERS (B)• $3.20 additional• Add .125" to overall lengthDOUBLE ACTING BUMPERS (B)• $5.00 additional• Add .125 to overall length*Front port rotated at 90° on BF model.EXTRA EXTENSION (EE)• Single, reverse and double acting, add $1.30 per inch ofextension• DXDE, add $2.00 per inch of extension; extension added toeach end• DXDE hollow rod, add $2.15 per inch of extension; extensionadded to each endDOUBLE ACTING FAILSAFE(JS =Spring Return, JR =Spring Extend)• Add $11.40 to base price + $1.55 to stroke adder• See page 1.65 for overall length addersHEAVY SPRINGS (H) are standard on all single acting blockfront and block rear mount, and all reverse acting and strokeadjust models.For all other single acting, add $2.25• Spring Force: 8.5 lbs. relaxed –17lbs. compressedMAGNET (prefix M) –Add $14.00• Single and reverse acting add .125" to overall length,• Stainless steel rod becomes standard with this option• Must specify track(s) for use with miniature position sensing(T2, T3, T4) –add $2.90 per track. See page 1.9 for tracklocation details. See Position Sensing Solutions, page 8.3 forswitch selection information.LOW TEMPERATURE (N)Temperature Range: -40° to 200ºF• Single acting add $1.25• Reverse acting add $1.60• Double acting add $2.45• DXDE add $3.05HIGH TEMPERATURE “U” CUPS (V)Temperature Range: 0° to 400ºF (-18° to 205ºC)• Single acting add $5.75• Double acting add $14.30• DXDE add $18.30• Reverse acting add $9.85ROD WIPER (W) (not available in standard single acting nowavailable in block mount)• Double acting add $2.90• DXDE add $5.80MOLYCOATED BODY (F)• Add $2.70 per inch of strokeNON-LUBE SERVICE (E)• Single acting add $4.55• Double acting add $10.15• DXDE add $13.95OPTIONS continued…STAINLESS STEEL ROD (prefix SR)• Add $3.00• Standard on DX, DXDE, DXDEH, DNR, DXNR, All blockmounts, and MoptionLOW PRESSURE HYDRAULIC (HL)• 250 psi maximum• Double acting models only• Option specified as aprefix• Add $18.00MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSSingle Acting –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-241 Mounting BracketBase Weight: .44Adder Per Inch of Stroke: .22Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders17□ -NR$28.75BASE PRICEAdd $4.15 per inch of strokeSingle Acting –Non-rotatingHexagon Rod –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-241 Mounting BracketBase Weight: .45Adder Per Inch of Stroke: .22See page 1.8 for length calculation of fractional stroke for single acting cylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice 1.45 ForTechnical Assistance: 800-442-4622500 HydraulicCylindersHole PunchCylinders

1-1/2" Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS17□ -NRP$33.15BASE PRICEAdd $4.15 per inch of stroke17□ -P$30.75BASE PRICEAdd $4.15 per inch of stroke17□ -R$32.35BASE PRICEAdd $4.15 per inch of stroke17□ -RP$36.80BASE PRICEAdd $4.15 per inch of strokeSingle Acting –Non-rotatingHexagon Rod –Spring Return –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessories:D-231-1 Piston Rod ClevisD-229 Pivot BracketsBase Weight: .46Adder Per Inch of Stroke: .22Single Acting –Pivot Type –SpringReturn –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessories:D-231-1 Piston Rod ClevisD-229 Pivot BracketsBase Weight: .45Adder Per Inch of Stroke: .22Reverse Single Acting –Pull Type–Rod Normally Extended –SpringReturn –Spring Force 8.5 lbs.Extended, 17 lbs. Retracted –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-241 Mounting BracketBase Weight: .44Adder Per Inch of Stroke: .22Reverse Single Acting –Pivot andPull Type –Rod Normally Extended –Spring Return –Spring Force 8.5 lbs,Extended, 17 lbs. Retracted –RearPivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessories:D-231-1 Piston Rod ClevisD-229 Pivot BracketsBase Weight: .45Adder Per Inch of Stroke: .22All prices are F.O.B. Monee, Illinois and are subject to change without notice1.46

1-1/2" Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS17□ -S orSC*$85.05BASE PRICEAdd $4.15 per inch of stroke*Add $2.70 for Conduit Outlet17□ -NRS orNRSC*$88.05BASE PRICEAdd $4.15 per inch of stroke*Add $2.70 for Conduit Outlet17□ -D$31.80BASE PRICEAdd $2.55 per inch of strokeSingle Acting –Built-in 3-WaySolenoid Operated Valve –SpringReturn –Front Nose Mounting –100PSI, 1 ⁄16" Orifice Standard –150 PSI,3⁄64" Orifice OptionalStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodStandard Voltage –115/60Optional Voltages:24, 230 A.C. or 6, 12, 24 D.C.Optional Accessory:D-241 Mounting BracketBase Weight: 1.38Adder Per Inch of Stroke: .22Single Acting –Non-rotating PistonRod –Built-in 3-Way SolenoidOperated Valve –Spring Return –Front Nose Mounting –100 PSI,1⁄16" Orifice Standard –150 PSI,3⁄64" Orifice OptionalStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodStandard Voltage –115/60Optional Voltages:24, 230 A.C. or 6, 12, 24 D.C.Optional Accessory:D-241 Mounting BracketBase Weight: 1.38Adder Per Inch of Stroke: .22Double Acting –Air Return –FrontNose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Stainless Steel RodOptional Rod WiperOptional Accessory:D-241 Mounting BracketBase Weight: .69Adder Per Inch of Stroke: .08Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylinders17□ -DP$36.35BASE PRICEAdd $2.55 per inch of strokeDouble Acting –Pivot Type –AirReturn –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7",8", 9", 10", 11", 12"Maximum Stroke –32"Optional Stainless Steel RodOptional Rod WiperOptional Accessories:D-231-1 Piston Rod ClevisD-229 Pivot BracketsBase Weight: .73Adder Per Inch of Stroke: .08Rod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.47 ForTechnical Assistance: 800-442-4622

1-1/2" Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS17□ -DX$38.70BASE PRICEAdd $2.55 per inch of stroke17□ -DXDE$51.15BASE PRICEAdd $4.00 per inch of stroke17□ -DXDEH$59.00BASE PRICEAdd $4.25 per inch of strokeDouble Acting –Double EndMounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7",8", 9", 10", 11", 12"Maximum Stroke –32"Stainless Steel Rod StandardOptional Rod WiperOptional Accessory:D-241 Mounting BracketBase Weight: .82Adder Per Inch of Stroke: .08Double Acting –Double End Rod –Air Return –Double End MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Rod WiperOptional Accessory:D-241 Mounting BracketBase Weight: 1.17Adder Per Inch of Stroke: .13Double Acting –Double EndHollow Rod –Air Return –DoubleEnd MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Rod WiperOptional Accessory:D-241 Mounting BracketBase Weight: 1.16Adder Per Inch of Stroke: .13Rod SealD-2500$1.901-1/2" BoreDouble Acting, Non-Rotating RodRod BearingD-2501$1.55Repair PartsDXNR Rod GuideD-1117$8.35DNR Rod Guide7/8-14 mounting threadsD-2509$8.25MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS17□ -DNR$59.80BASE PRICEAdd $3.00 per inch of strokeDouble Acting –Non-rotatingHexagon Rod –Front NoseMounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessory:D-2669 Mounting BracketBase Weight: .77Adder Per Inch of Stroke: .09All prices are F.O.B. Monee, Illinois and are subject to change without notice1.48

1-1/2" Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS17□ -DXNR$66.40BASE PRICEAdd $3.00 per inch of strokeBF-17□ -DNR$67.70BASE PRICEAdd $3.00 per inch of strokeBFT-17□ -DNR$76.25BASE PRICEAdd $3.00 per inch of stroke17□ -A$49.85BASE PRICEAdd $4.15 per inch of stroke1-1/2" BoreDouble Acting, Non-Rotating Rod (continued)Double Acting –Non-rotatingHexagon Rod –Double EndMounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessories:D-241 Mounting BracketD-8310-A Rod ClevisBase Weight: .87Adder Per Inch of Stroke: .08Double Acting –Non-rotatingHexagon Rod –Front BlockMounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessory:D-8310-A Rod ClevisBase Weight: .71Adder Per Inch of Stroke: .09Double Acting –Non-rotatingHexagon Rod –Front TrunnionMounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessories:TRB-2 Trunnion BracketsD-8310-A Rod ClevisBase Weight: .78Adder Per Inch of Stroke: .091-1/2" BoreAdjustable StrokeMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSSingle Acting –Spring Return –Adjustable Stroke –Double EndMounting –Brass Piston Rod Bearingand Stroke Adjustment in 1"increments to 3". Mounting Bracketsare included.1" Stroke Adjusts 0" to 1", 2" Stroke1" to 2", 3" Stroke 2" to 3"Maximum Stroke –6"Optional Stainless Steel RodBase Weight: .75Adder Per Inch of Stroke: .25Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.49 ForTechnical Assistance: 800-442-4622

1-1/2" Bore Air Cylinders17□ -RA$50.80BASE PRICEAdd $4.15 per inch of stroke1-1/2" BoreAdjustable Stroke (continued)MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSReverse Single Acting –Pull Type–Rod Normally Extended –NoseMounting –Stroke Adjustment in 1"increments to 3".1" Stroke Adjusts 0" to 1", 2" Stroke1" to 2", 3" Stroke 2" to 3"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-241 Mounting BracketBase Weight: .50Adder Per Inch of Stroke: .2517□ -AP$48.45BASE PRICEAdd $4.15 per inch of strokeSingle Acting –Pivot Type –RearPivot Mounting –Stroke Adjustmentin 1" increments to 3".1" Stroke Adjusts 0" to 1", 2" Stroke1" to 2", 3" Stroke 2" to 3"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessories:D-231-1 Piston Rod ClevisD-229 Pivot BracketsBase Weight: .50Adder Per Inch of Stroke: .2517□ -M$65.00BASE PRICEAdd $4.15 per inch of stroke1-1/2" BoreBuilt-In Manual ValveMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSSingle Acting –Built-in 3-WayManual Valve –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-241 Mounting BracketBase Weight: .75Adder Per Inch of Stroke: .2217□ -NRM$67.60BASE PRICEAdd $4.15 per inch of strokeSingle Acting –Built-in 3-WayManual Valve –Non-rotatingHexagon Rod –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-241 Mounting BracketBase Weight: .75Adder Per Inch of Stroke: .22All prices are F.O.B. Monee, Illinois and are subject to change without notice1.50

1-1/2" Bore Air Cylinders1-1/2" BoreBlock Mounted •Spring Force: 8.5 lbs. Retracted, 17 lbs. ExtendedMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSBF-17□$44.15BASE PRICEAdd $4.25 per inch of strokeSingle Acting –Front BlockMounting –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardBase Weight: .99Adder Per Inch of Stroke: .22Standard AirCylindersThree-PositionCylindersCushionCylindersBF-17□ -D$49.70BASE PRICEAdd $2.55 per inch of strokeBF-17□ -R$49.75BASE PRICEAdd $4.25 per inch of strokeBF-17□ -Sor SC*$102.80BASE PRICEAdd $4.25 per inch of stroke*Add $2.70 for conduit outletBR-17□$37.55BASE PRICEAdd $4.25 per inch of strokeDouble Acting –Front BlockMounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardBase Weight: .99Adder Per Inch of Stroke: .08Pull Type –Front Block Mounting –Rod Normally Extended –ReverseSingle Acting –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardBase Weight: .96Adder Per Inch of Stroke: .22Built-in 3-Way SolenoidOperated Valve –Single Acting –Spring Return –Front BlockMounting –100 PSI, 1 ⁄16" OrificeStandard –150 PSI, 3 ⁄64"OrificeOptionalStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardStandard Voltage –115/60Optional Voltages:24, 230 A.C. or 6, 12, 24 D.C.Base Weight: 1.90Adder Per Inch of Stroke: .22Single Acting –Rear BlockMounting for Vertical Positioning–Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardBase Weight: .87Adder Per Inch of Stroke: .08MRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.51 ForTechnical Assistance: 800-442-4622

1-1/2" Bore Air Cylinders1-1/2" BoreBlock Mounted (continued)MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSBR-17□ -D$43.70BASE PRICEAdd $2.55 per inch of strokeDouble Acting –Rear BlockMounting for Vertical Positioning –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardBase Weight: .87Adder Per Inch of Stroke: .08BR-17□ -R$44.40BASE PRICEAdd $4.25 per inch of strokePull Type –Rear Block Mountingfor Vertical Positioning –RodNormally Extended –Reverse SingleActing –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardBase Weight: .90Adder Per Inch of Stroke: .101-1/2" BoreTrunnion Mounted •Spring Force: 8.5 lbs. Retracted, 17 lbs. ExtendedMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSBFT-17□$53.10BASE PRICEAdd $4.25 per inch of strokeSingle Acting –Front BlockTrunnion Mounting –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessories:TRB-2 Trunnion BracketsD-231-1 Rod ClevisBase Weight: 1.20Adder Per Inch of Stroke: .22BFT-17□ -D$59.10BASE PRICEAdd $2.55 per inch of StrokeBRT-17□$46.05BASE PRICEAdd $4.25 per inch of strokeDouble Acting –Front BlockTrunnion Mounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessories:TRB-2 Trunnion BracketsD-231-1 Rod ClevisBase Weight: 1.06Adder Per Inch of Stroke: .08Single Acting –Rear BlockTrunnion Mounting –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Stainless Steel Rod StandardOptional Accessories:TRB-2 Trunnion BracketsD-231-1 Rod ClevisBase Weight: 1.06Adder Per Inch of Stroke: .22All prices are F.O.B. Monee, Illinois and are subject to change without notice1.52

1-1/2"Bore Air CylindersBRT-17□ -D$52.85BASE PRICEAdd $2.55 per inch of stroke1-1/2" BoreTrunnion Mounted (continued)MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSDouble Acting –Rear BlockTrunnion Mounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessories:TRB-2 Trunnion BracketsD-231-1 Rod ClevisBase Weight: .91Adder Per Inch of Stroke: .08Standard AirCylindersThree-PositionCylindersCushionCylindersD-241$5.201-1/2" BoreAccessoriesD-229$6.70TRB-2$11.30MRS®CylindersNon-RotatingCylindersPCCylindersMounting BracketD-2669$4.20Pivot BracketD-231-1$5.95Trunnion BracketsD-8310-A$6.60All StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersMounting BracketD-3556$.80Piston Rod ClevisD-2545$1.20Rod ClevisRod LockCylinders500 HydraulicCylindersMounting NutMounting NutNote: For stainless steel accessories see page 1.99 and 1.102-1.103.Mounting bracket not available in stainless steel.Hole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.53 ForTechnical Assistance: 800-442-4622

1-3/4" Bore Air Cylinders• Ground and Polished, High Strength Carbon SteelPiston Rod Standard –303 Stainless Steel RodAvailable as an Option –Bronze Rod Guide BushingStandard• Force Exerted Approximately 2.4 of Air Line Pressure• Enclosed Spring Force: 11 lbs. Relaxed –24lbs.Compressed• Cushion Quiet Bumpers StandardNO CHARGE:OPTIONS:• MAGNALUBE G(G)• PORTS ROTATED (K)• NOTHREAD (NT)• SIDE PORTED REAR HEAD (Q)Add .56" to nose mount overall length.• PIVOT BUSHING (Y).375" IDEXTRA EXTENSION (EE)• Single, reverse and double acting, add $1.30 per inch ofextension• DXDE, add $1.90 per inch of extension; extension added toeach end• DXDE hollow rod, add $2.00 per inch of extension; extensionadded to each endDOUBLE ACTING FAILSAFE(JS =Spring Return, JR =Spring Extend)•Add $11.40 to base price + $1.55 to stroke adder•See page 1.65 for overall length adders□ Enter Stroke Length as 3rd DigitOPTIONS continued…MAGNET (prefix M) –Add $14.00• Single and reverse acting add .125" to overall length,• Stainless steel rod becomes standard with this option• Must specify track(s) for use with miniature position sensing(T2, T3, T4) –add $2.90 per track. See page 1.9 for tracklocation details. See Position Sensing Solutions, page 8.3 forswitch selection information.LOW TEMPERATURE (N)Temperature Range: -40° to 200ºF• Single acting add $1.25• Reverse acting add $1.60• Double acting add $2.45• DXDE add $3.05HIGH TEMPERATURE “U” CUPS (V)Temperature Range: 0° to 400ºF (-18° to 205ºC)• Single acting add $7.50• Double acting add $18.30• DXDE add $24.20• Reverse acting add $13.70MOLYCOATED BODY (F)• Add $2.70 per inch of strokeNON-LUBE SERVICE (E)• Single acting add $4.55• Double acting add $10.15• DXDE add $13.95ROD WIPER (W)(not available in standard single acting)• Add $2.90• DXDE add $5.80STAINLESS STEEL ROD (prefix SR)• Add $4.05• Standard on DXDE, DXDEHLOW PRESSURE HYDRAULIC (HL)• 250 psi maximum• Double acting models only• Option specified as aprefix• Add $18.00MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS24□$40.65BASE PRICEAdd $5.15 per inch of strokeSingle Acting –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:C-1337 Mounting BracketBase Weight: .85Adder Per Inch of Stroke: .3624□ -NR$44.00BASE PRICEAdd $5.15 per inch of strokeSingle Acting –Non-rotatingHexagon Rod –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:C-1337 Mounting BracketBase Weight: .86Adder Per Inch of Stroke: .36See page 1.8 for length calculation of fractional stroke for single acting cylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.54

1-3/4" Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS24□ -NRP$49.90BASE PRICEAdd $5.15 per inch of strokeSingle Acting –Non-rotatingHexagon Rod –Pivot Type –SpringReturn –Rear Pivot or Double EndMountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessories:D-231-3 Piston Rod ClevisD-620-1 Pivot BracketsC-1337 Mounting BracketBase Weight: .86Adder Per Inch of Stroke: .36Standard AirCylindersThree-PositionCylindersCushionCylinders24□ -P$46.50BASE PRICEAdd $5.15 per inch of stroke24□ -R$49.05BASE PRICEAdd $5.15 per inch of stroke24□ -D$49.25BASE PRICEAdd $2.55 per inch of strokeSingle Acting –Pivot Type –SpringReturn –Rear Pivot or Double EndMountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessories:D-231-3 Piston Rod ClevisD-620-1 Pivot BracketsC-1337 Mounting BracketBase Weight: .86Adder Per Inch of Stroke: .36Reverse Single Acting –Pull Type–Rod Normally Extended –SpringReturn –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:C-1337 Mounting BracketBase Weight: 1.17Adder Per Inch of Stroke: .31Double Acting –Air Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Stainless Steel RodOptional Accessory:C-1337 Mounting BracketBase Weight: 1.29Adder Per Inch of Stroke: .11MRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.55 ForTechnical Assistance: 800-442-4622

1-3/4" Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS24□ -DP$55.40BASE PRICEAdd $2.55 per inch of stroke24□ -DXDE$71.80BASE PRICEAdd $3.75 per inch of stroke24□ -DXDEH$86.55BASE PRICEAdd $4.00 per inch of strokeDouble Acting –Pivot Type –AirReturn –Rear Pivot or Double EndMountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6",7", 8", 9", 10", 11", 12"Maximum Stroke –32"Optional Stainless Steel RodOptional Accessories:D-231-3 Piston Rod ClevisD-620-1 Pivot BracketsC-1337 Mounting BracketBase Weight: 1.64Adder Per Inch of Stroke: .11Double Acting –Double End Rod –Air Return –Double End MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7",8", 9", 10", 11", 12"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessory:C-1337 Mounting BracketBase Weight: 1.87Adder Per Inch of Stroke: .18Double Acting –Double EndHollow Rod –Air Return –DoubleEnd MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessory:C-1337 Mounting BracketBase Weight: 1.80Adder Per Inch of Stroke: .16All prices are F.O.B. Monee, Illinois and are subject to change without notice1.56

1-3/4" Bore Air CylindersC-1337$8.301-3/4" BoreAccessoriesD-620-1$13.05D-231-3$5.95Standard AirCylindersThree-PositionCylindersCushionCylindersMounting BracketD-1331$2.35Pivot BracketsPiston Rod ClevisMRS®CylindersNon-RotatingCylindersPCCylindersMounting NutAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.57 ForTechnical Assistance: 800-442-4622

2" Bore Air Cylinders• Ground and Polished, High Strength Carbon SteelPiston Rod Standard –303 Stainless Steel RodAvailable as an Option –Bronze Rod Guide BushingStandard• Force Exerted Approximately 3.1 of Air Line Pressure• Enclosed Spring Force: 15 lbs. Relaxed –30lbs.Compressed• Mounting Nuts Not IncludedOPTIONS:NO CHARGE:• MAGNALUBE G(G)• PORTS ROTATED (K)• NOTHREAD (NT)• SIDE PORTED REAR HEAD (Q)Add .38" to nose mount overall length.SINGLE AND REVERSE ACTING BUMPERS (B)• $3.85 additional• Add .125" to overall lengthDOUBLE ACTING BUMPERS (B)• $6.40 additional• Add .250 to overall lengthEXTRA EXTENSION (EE)• Single, reverse and double acting, add $1.45 per inchof extension• DXDE, add $2.10 per inch of extension; extensionadded to each endDOUBLE ACTING FAILSAFE(JS =Spring Return, JR =Spring Extend)•Add $22.70 to base price + $2.80 to stroke adder•See page 1.65 for overall length addersOPTIONS continued…MAGNET (prefix M) –Add $17.00• Single and reverse acting add .125" to overall length,• Stainless steel rod becomes standard with this option• Must specify track(s) for use with miniature positionsensing (T2, T3, T4) –add $2.90 per track. See page 1.9 fortrack location details. See Position Sensing Solutions, page8.3 for switch selection information.LOW TEMPERATURE (N)Temperature Range: -40° to 200ºF• Single acting add $1.60• Reverse acting add $1.85• Double acting add $3.05• DXDE add $3.30HIGH TEMPERATURE “U” CUPS (V)Temperature Range: 0° to 400ºF (-18° to 205ºC)• Single acting add $7.50• Double acting add $18.30• DXDE add $24.20• Reverse acting add $13.70MOLYCOATED BODY (F)• Add $2.70 per inch of strokeNON-LUBE SERVICE (E)• Single acting add $6.00• Double acting add $15.00• DXDE add $18.05ROD WIPER (W)(not available in standard single acting)• Add $5.75• DXDE add $11.50STAINLESS STEEL ROD (prefix SR)• Add $4.15• Standard on DXP, DXDE, XP, MoptionLOW PRESSURE HYDRAULIC (HL)• 250 psi maximum• Double acting models only• Option specified as aprefix• Add $18.00□ Enter Stroke Length as 3rd DigitMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS31□$53.15BASE PRICEAdd $5.70 per inch of strokeSingle Acting –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –4"Optional Stainless Steel RodOptional Accessories:D-615 Mounting BracketD-508 Mounting NutBase Weight: 1.04Adder Per Inch of Stroke: .4331□ -XP$64.85BASE PRICEAdd $5.95 per inch of strokeSingle Acting –Universal MountingType –Nose, Pivot or Double End –Spring Return –Bronze Rod Bushingand Bronze Pivot BushingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –4"Stainless Steel Rod StandardOptional Accessories:D-231-3 Piston Rod ClevisD-615 Mounting BracketD-620 Pivot BracketsD-508 Mounting NutBase Weight: 1.26Adder Per Inch of Stroke: .43All prices are F.O.B. Monee, Illinois and are subject to change without notice1.58

2" Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS31□ -R$61.55BASE PRICEAdd $5.70 per inch of strokeReverse Single Acting –Pull Type–Rod Normally Extended –SpringReturn –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –4"Optional Stainless Steel RodOptional Accessories:D-615 Mounting BracketD-508 Mounting NutBase Weight: 1.24Adder Per Inch of Stroke: .43Standard AirCylindersThree-PositionCylindersCushionCylinders31□ -RP$67.30BASE PRICEAdd $5.70 per inch of stroke31□ -D$51.20BASE PRICEAdd $2.80 per inch of stroke31□ -DXP$61.50BASE PRICEAdd $2.90 per inch of strokeReverse Single Acting –Pivot andPull Type –Rod Normally Extended –Spring Return –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –4"Optional Stainless Steel RodOptional Accessories:D-231-3 Piston Rod ClevisD-620 Pivot BracketD-508 Mounting NutD-615 Mounting BracketBase Weight: 1.46Adder Per Inch of Stroke: .43Double Acting –Air Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Stainless Steel RodOptional Accessories:D-508 Mounting NutD-615 Mounting BracketBase Weight: 1.40Adder Per Inch of Stroke: .15Double Acting –UniversalMounting Type –Pivot or DoubleEnd –Air Return –Bronze PivotBushingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7",8", 9", 10", 11", 12", 13", 14", 15",16", 17", 18", 19", 20", 21", 22",23", 24"Maximum Stroke –32"Stainless Steel Rod StandardOptional Accessories:D-231-3 Piston Rod ClevisD-615 Mounting BracketD-620 Pivot BracketsD-508 Mounting NutBase Weight: 1.62Adder Per Inch of Stroke: .15MRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.59 ForTechnical Assistance: 800-442-4622

2" Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS31□ -DXDE$75.85BASE PRICEAdd $4.15 per inch of strokeD-615$11.50Double Acting –Double End Rod –Air Return –Double End MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7",8", 9", 10", 11", 12"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessories:D-615 Mounting BracketD-508 Mounting NutBase Weight: 1.97Adder Per Inch of Stroke: .242" BoreAccessoriesD-620$13.05D-231-3$5.95Mounting BracketD-508$4.85Pivot BracketsPiston Rod ClevisMounting NutNote: For stainless steel accessories see page 1.99 and 1.102-1.103.All prices are F.O.B. Monee, Illinois and are subject to change without notice1.60

2-1/2" Bore Air Cylinders• Ground and Polished, High Strength Carbon SteelPiston Rod Standard –303 Stainless Steel RodAvailable as an Option –Bronze Rod Guide BushingStandard• Force Exerted Approximately 5.0 of Air Line Pressure• Double Acting Only• Mounting Nuts Not IncludedNO CHARGE:□ Enter Stroke Length as 3rd DigitOPTIONS continued…MAGNET (prefix M) –Add $17.00• Stainless steel rod becomes standard with this option• Must specify track(s) for use with miniature position sensing(T2, T3, T4) –add $2.90 per track. See page 1.9 for tracklocation details. See Position Sensing Solutions, page 8.3 forswitch selection information.LOW TEMPERATURE (N)Temperature Range: -40° to 200ºF• Double acting add $3.60• DXDE add $4.80HIGH TEMPERATURE “U” CUPS (V)Temperature Range: 0° to 400ºF (-18° to 205ºC)• Double acting add $18.30• DXDE add $24.20MOLYCOATED BODY (F)• Add $2.70 per inch of strokeNON-LUBE SERVICE (E)• Double acting add $17.40• DXDE add $20.45ROD WIPER (W)(not available in standard single acting)• Add $5.75• DXDE add $11.50STAINLESS STEEL ROD (prefix SR)• Add $4.15• Standard on Moption, DXP, DXDELOW PRESSURE HYDRAULIC (HL)• 250 psi maximum• Double acting models only• Option specified as aprefix• Add $23.00MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS50□ -D$73.40BASE PRICEAdd $3.00 per inch of strokeOPTIONS:• MAGNALUBE G(G)• PORTS ROTATED (K)• NOTHREAD (NT)• SIDE PORTED REAR HEAD (Q)Add .38" to nose mount overall length.DOUBLE ACTING BUMPERS (B)• $6.40 additional• Add .250 to overall lengthEXTRA EXTENSION (EE)• Double acting, add $1.55 per inch of extension• DXDE, add $2.50 per inch of extension; extension added toeach endDouble Acting –Air Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Stainless Steel RodOptional Accessories:D-615-1 Mounting BracketD-2540 Mounting NutBase Weight: 1.98Adder Per Inch of Stroke: .17Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairable50□ -DXP$86.20BASE PRICEAdd $3.10 per inch of strokeDouble Acting –UniversalMounting Type –Pivot or DoubleEnd –Air Return –Bronze RodBushing and Bronze Pivot BushingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7",8", 9", 10", 11", 12", 13", 14", 15",16", 17", 18", 19", 20", 21", 22",23", 24"Maximum Stroke –32"Stainless Steel Rod StandardOptional Accessories:D-231-3 Piston Rod ClevisD-615-1 Mounting BracketD-620 Pivot BracketsD-2540 Mounting NutBase Weight: 2.27Adder Per Inch of Stroke: .17ZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.61 ForTechnical Assistance: 800-442-4622

2-1/2" Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS50□ -DXDE$100.50BASE PRICEAdd $4.85 per inch of strokeD-615-1$12.20Double Acting –Double End Rod –Air Return –Double End MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7",8", 9", 10", 11", 12"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessories:D-615-1 Mounting BracketD-2540 Mounting NutBase Weight: 2.32Adder Per Inch of Stroke: .342-1/2" BoreAccessoriesD-620$13.05D-231-3$5.95Mounting BracketD-2540$4.35Pivot BracketsPiston Rod ClevisMounting NutAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.62

3" Bore Air Cylinders• Ground and Polished, High Strength Carbon SteelPiston Rod Standard –303 Stainless Steel RodAvailable as an Option –Bronze Rod Guide BushingStandard• Force Exerted Approximately 7.0 of Air Line Pressure• Double Acting Only• Mounting Nuts Not IncludedNO CHARGE:□ Enter Stroke Length as 3rd DigitOPTIONS continued…MAGNET (prefix M) –Add $29.00• Stainless steel rod becomes standard with this option• Must specify track(s) for use with miniature position sensing(T2, T3, T4) –add $2.90 per track. See page 1.9 for tracklocation details. See Position Sensing Solutions, page 8.3 forswitch selection information.LOW TEMPERATURE (N)Temperature Range: -40° to 200ºF• Double acting add $3.60• DXDE add $4.80HIGH TEMPERATURE “U” CUPS (V)Temperature Range: 0° to 400ºF (-18° to 205ºC)• Double acting add $19.25• DXDE add $25.50MOLYCOATED BODY (F)• Add $2.70 per inch of strokeNON-LUBE SERVICE (E)• Double acting add $20.55• DXDE add $23.65ROD WIPER (W)(not available in standard single acting)• Add $5.75• DXDE add $11.50STAINLESS STEEL ROD (prefix SR)• Add $5.00• Standard on DXP, DXDE, and MoptionLOW PRESSURE HYDRAULIC (HL)• 250 psi maximum• Double acting models only• Option specified as aprefix• Add $23.00MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS70□ -D$104.40BASE PRICEAdd $3.60 per inch of strokeOPTIONS:• MAGNALUBE G(G)• PORTS ROTATED (K)• NOTHREAD (NT)• SIDE PORTED REAR HEAD (Q)Add .44" to nose mount overall length.DOUBLE ACTING BUMPERS (B)• $8.40 additional• Add .250 to the lengthEXTRA EXTENSION (EE)• Double acting, add $1.80 per inch of extension• DXDE, add $2.65 per inch of extension; extension added toeach endDouble Acting –Air Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Carbon Steel Piston Rod StandardOptional Stainless Steel RodOptional Accessories:D-19127 Mounting BracketD-5379 Mounting NutBase Weight: 3.34Adder Per Inch of Stroke: .26Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairable70□ -DXP$117.55BASE PRICEAdd $3.75 per inch of strokeDouble Acting –Universal MountPivot or Double End MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7",8", 9", 10", 11", 12", 13", 14", 15",16", 17", 18", 19", 20", 21", 22",23", 24"Maximum Stroke –32"Stainless Steel Rod StandardOptional Accessories:D-13512-A Pivot BracketD-19127 Mounting BracketD-8314-A Rod ClevisD-5379 Mounting NutBase Weight: 3.87Adder Per Inch of Stroke: .26ZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.63ForTechnical Assistance: 800-442-4622

3" Bore Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS70□ -DXDE$129.95BASE PRICEAdd $5.05 per inch of strokeDouble Acting –Double End Rod –Double End MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7",8", 9", 10", 11", 12"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessories:D-19127 Mounting BracketD-5379 Mounting NutBase Weight: 4.05Adder Per Inch of Stroke: .52D-13512-A$12.653" BoreAccessoriesD-8314-A$12.45D-19127$11.30Pivot BracketD-5379$4.35Rod ClevisMounting BracketMounting NutAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.64

Fail Safe Length Adders (Options JS and JR)Spring Extend Length AdderBore Type Overall Length Adder for -JR Option0070-D 1.65 +1.25 per 0.50" of stroke5/16" 0070-DXP 2.19 +1.25 per 0.50" of strokeBF-0070-D1.71 +1.25 per 0.50" of stroke010-D, BF-010-D &BFT-010-D2.17 +1.44 per 0.50" of stroke7/16" 010-DP &010-DX 2.86 +1.44 per 0.50" of strokeBR-010-D &BRT-010-D3.36 +1.44 per 0.50" of stroke9/16"020-D 2.34 +2.63 per 1" of stroke020-DXP2.81 +2.63 per 1" of stroke040-D 3.03 +2.69 per 1" of stroke3/4" 040-DP, 040-DXP, BR-040-D &BRT-040-D 3.81 +2.69 per 1" of strokeBF-040-D &BFT-040-D3.28 +2.69 per 1" of stroke7/8"060-D 3.19 (3.60 High Temp.) +2.56 per 1" of stroke060-DXP4.10 (4.50 High Temp.) +2.56 per 1" of stroke090-D 3.38 (3.5) +2.56 per 1" of stroke1-1/16"090-DP, 090-DX4.38 +2.56 per 1" of strokeBF-090-D, BFT-090-D4.25 +2.56 per 1" of strokeBR-090-D, BRT-090-D4.50 +2.56 per 1" of stroke1-1/4"120-D 4.38 (4.25) +2.81 per 1" of stroke120-DP5.50 (5.44) +2.81 per 1" of stroke170-D 3.75 +2.69 per 1" of stroke170-DP4.81 +2.69 per 1" of stroke1-1/2" 170-DX 4.56 +2.69 per 1" of strokeBF-170-D, BFT-170-D4.25 +2.69 per 1" of strokeBR-170-D, BRT-170-D4.44 +2.69 per 1" of stroke1-3/4"240-D 5.12 (4.99 High Temp.) =3"per 1" of stroke240-DP6.68 (6.56 High Temp.) =3"per 1" of strokeSpring Return Length AdderBore Type Overall Length Adder for -JS Option0070-D 1.65 +0.75 per 0.50" of stroke5/16" 0070-DXP 2.19 +0.75 per 0.50" of strokeBF-0070-D1.71 +0.75 per 0.50" of stroke010-D, BF-010-D &BFT-010-D2.17 +0.94 per 0.50" of stroke7/16"010-DP &010-DX2.86 +0.94 per 0.50" of strokeBR-010-D &BRT-010-D3.36 +1.44 per 0.50" of stroke010-DXDE2.86 +1.44 per 0.50" of stroke020-D 2.34 +1.63 per 1" of stroke9/16" 020-DXP 2.84 +1.63 per 1" of stroke020-DXDE3.00 +2.63 per 1" of stroke040-D 3.03 +1.69 per 1" of stroke3/4"040-DP, 040-DXP, BR-040-D &BRT-040-D 3.81 +1.69 per 1" of strokeBF-040-D &BFT-040-D3.28 +1.69 per 1" of stroke040-DXDE4.06 +2.69 per 1" of stroke060-D 3.19 (3.60 High Temp.) +1.56 per 1" of stroke7/8" 060-DXP 4.10 (4.50 High Temp.) +1.56 per 1" of stroke060-DXDE4.16 (5.03 High Temp.) +2.56 per 1" of stroke090-D 3.38 (3.50) +1.56 per 1" of stroke090-DP, 090-DX4.38 +1.56 per 1" of stroke1-1/16" BF-090-D, BFT-090-D 4.25 +1.56 per 1" of strokeBR-090-D, BRT-090-D4.50 +1.56 per 1" of stroke090-DXDE4.25 +2.56 per 1" of stroke120-D 4.38 (4.25 High Temp.) +1.81 per 1" of stroke1-1/4" 120-DP 5.50 (5.44 High Temp.) +1.81 per 1" of stroke120-DXDE5.94 (5.81 High Temp.) +2.81 per 1" of stroke170-D 3.75 +1.69 per 1" of stroke170-DP4.81 +1.69 per 1" of stroke1-1/2"170-DX4.56 +1.69 per 1" of strokeBF-170-D, BFT-170-D4.25 +1.69 per 1" of strokeBR-170-D, BRT-170-D4.44 +1.69 per 1" of stroke170-DXDE4.19 +2.69 per 1" of stroke240-D 5.12 (4.99 High Temp.) =2"per 1" of stroke1-3/4" 240-DP 6.68 (6.56 High Temp.) =2"per 1" of stroke240-DXDE7.25 (6.86 High Temp.) =3"per 1" of strokeSpring Return Length Adder for2"BoreBoreStrokeType1" 2" 3" 4"2" 310-D, 310-DP 5.94 +stroke 6.94 +stroke 7.19 +stroke 9.13 +stroke310-DXP 7.32 +stroke 8.32 +stroke 8.57 +stroke 10.51 +stroke310-DXDE 7.81 +2xstroke 8.81 +2xstroke 9.06 +2xstroke 11.00 +2xstrokeSpring Extend Length Adder for2"BoreBoreStrokeType1" 2" 3" 4"2" 310-D, 310-DP 5.94 +2xstroke 6.94 +2xstroke 7.19 +2xstroke 9.13 +2xstroke310-DXP 7.32 +2xstroke 8.32 +2xstroke 8.57 +2xstroke 10.51 +2xstroke1.65ForTechnical Assistance: 800-442-4622Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylinders

Three-Position Original Line CylindersBimba’s Three-Position Original Line stainless steel bodycylinder provides three positions with asingle cylinder.Bimba offers the performance and quality of the unitizedOriginal Line cylinder design along with it’s product breadthnow in three positive stroke positions.The model number for all Three-Position Original Line cylindersconsists of three alphanumeric clusters.These designateproduct type, bore size and stroke length, and options.Pleaserefer to the charts below for an example of model numberProduct TypeBlank –Three-positionOriginal LineM–Magnet option forcylinders*NR –Non-rotating rod option*Magnet located onstroke Bpiston only.Mounting OptionsD–Double acting, nose mountDXP –Double acting, universal mountBore Sizes02 –9/16"04 –3/4"09 –1-1/16"17 –1-1/2"31 –2"Note: Consult page 1.4 for option combination compatibility.How toOrderM-043/4.5-DW. This is a3/4" bore, with a3"stroke for positionA, plus an additional 4-1/2" stroke for position B, double actingcylinder with arod wiper.Stroke A Stroke B Standard Stroke Lengths and StrokeMaximums0.5 =1/2" 0.5 =1/2" Nose Mount1=1" 1"=1" 1"increments to 12"1.5 =2-1/2" 2.5 =2-1/2" 2xStroke A+Stroke BMaximum =12"3.75 =3-3/4" 3.75 =3-3/4" Universal Mountetc. etc. 1" increments to 24"M - 043 /4.5 - D W2xStroke A+Stroke BMaximum =32"Options(Enter in alphabetical order, except EE which is last)B–BumpersE–Non-lube seals and lubricationF–Molycoated bodyG–Magnalube ® GK–Ports rotated 90degreesN–Low temperature seals &lubricationNT –Non-threaded rodQ–Side ported rear head (see standard Original Line informationfor applicable length adders by bore size)T–Switch Track (T2, T3 or T4), see Position Sensing Solutions,page 8.3 for switch selection informationV–High temperature seals &lubricationW–Rod wiperEEX.XX –Extra rod extensionSpecificationsExpected life: 1400 miles when lubricatedTotal stroke tolerance:9/16" –1-1/2" +.075/-.0402": +.095/-.060Operating Medium: Air onlyMaximum Operating Pressure: 250 psiTemperature Range: -20˚F to 200˚FStandard Lubrication: HT-99Endcaps, center section, and piston material: AluminumCylinder body: 304 stainless steelPiston and rod seals: Buna N“U” cupsRod and pivot bushings: Sintered bronzePiston rod: 303 stainless steel®Magnalube is aregistered trademark ofCarleton Stuart Corporation1.66

Three-Position Original Line CylindersList PricesMountingTotalMounting-BoreDList-DXP List combined strokePricePrice adder, per inch**02 -9/16" $32.75 $36.20 $1.6504 -3/4" 35.70 41.00 1.6509 -1-1/16" 41.20 46.90 1.6517 -1-1/2" 55.85 62.55 2.5531 -2" 77.35 87.10 2.90**Total combined stroke =(2Xstroke A)+Stroke BOptionsM B E F N V W EE NRBore (Prefix) Bumpers Non-lube Molycoated Low High Rod Extra Rod PrefixMagnetic Seals and Body Temperature Temperature Wiper Extension Non-Position Lubrication per inch Seals Seals and per inch rotatingSensing Lubrication rod9/16" (02) $9.55 $8.30 $16.65 $2.70 $2.45 $21.50 $2.90 $0.90 $17.003/4" (04) 9.55 8.30 17.30 2.70 2.45 21.50 2.90 0.90 17.001-1/16" (09) 11.90 8.30 19.05 2.70 3.60 25.85 2.90 0.90 22.701-1/2" (17) 14.30 10.05 20.25 2.70 4.80 28.50 2.90 1.30 22.702" (31) 16.65 12.85 29.90 2.70 6.00 36.55 5.75 1.45 27.30No Charge Options: G, K, NTStandard AirCylindersThree-PositionCylindersCushionCylindersMRS® MRSCylindersNon-RotatingCylindersDMounting Style (in.)DimensionsDXP Mounting Style (in.)PCCylindersAll StainlessNon-RepairableAll StainlessRepairableDModelBumper OptionBore Aa Ba C D E F G H I J K L M N O Aa Ba9/16" (02) 4.12 2.25 0.75 #10-32 0.38 0.06 N/A 0.50 7/16-20 N/A #10-32 .434/.437 0.19 0.50 0.62 4.31 2.313/4" (04) 5.47 3.12 0.97 1/8 NPT 0.50 0.09 N/A 0.50 5/8-18 N/A 1/4-28 .621/.624 0.19 0.62 0.81 5.47 3.121-1/16" (09) 5.97 3.25 1.19 1/8 NPT 0.62 0.09 0.12 0.50 5/8-18 0.25 5/16-24 .621/.624 0.49 0.88 1.12 6.09 3.251-1/2" (17) 6.5 3.69 1.50 1/8 NPT 0.88 0.09 0.25 0.75 3/4-16 0.38 7/16-20 .746/.749 0.25 0.88 1.56 6.62 3.692" (31) 8.25 4.78 1.92 1/4 NPT 1.19 0.12 0.38 0.88 1-1/4-12 0.50 1/2-20 1.375/1.372 0.31 1.25 2.09 8.62 4.91ZLine AirCylindersRod LockCylindersDXP ModelBumper OptionBore Aa Ba C D E F G H I J K L M N O P Q R Aa Ba9/16" (02) 4.41 2.25 0.75 #10-32 0.38 0.06 N/A 0.50 7/16-20 N/A #10-32 .434/.437 0.38 0.31 0.62 0.25 0.19 0.157 4.66 2.313/4" (04) 6.25 3.12 0.97 1/8 NPT 0.50 0.09 N/A 0.50 5/8-18 N/A 1/4-28 .621/.624 0.62 0.38 0.86 0.34 0.28 0.250 6.25 3.121-1/16" (09) 6.56 3.25 1.19 1/8 NPT 0.62 0.09 0.12 0.50 5/8-18 0.25 5/16-24 .621/.624 0.62 0.38 1.12 0.34 0.28 0.250 6.68 3.251-1/2" (17) 7.18 3.69 1.50 1/8 NPT 0.63 0.09 0.25 0.75 3/4-16 0.38 7/16-20 .746/.749 0.81 0.62 1.56 0.50 0.38 0.375 7.31 3.692" (31) 9.19 4.78 1.92 1/4 NPT 1.19 0.12 0.38 0.88 1-1/4-12 0.50 1/2-20 1.375/1.372 1.03 0.75 2.08 0.56 0.44 0.375 9.56 4.91500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.67ForTechnical Assistance: 800-442-4622

Air Cylinders with Adjustable Cushions*• Readily Accessible Cushion Needle For EasyAdjustment• Double Acting Models• Rated 250 PSI• 304 Stainless Steel Body –Mirror Finish I.D.• High Strength Aluminum Alloy Porting Ends• Ground and Roller Burnished 303 Stainless SteelPiston Rod Standard• Buna N“U” Cup Seals• Low Breakaway Friction –Less Than 5PSI• Special Stroke Lengths Available on RequestOPTIONS FOR EACH BORE SIZE:NO CHARGE:• MAGNALUBE G(G)• NOTHREAD (NT)(Available on 3 ⁄4 ", 1 1 ⁄16" and 1 1 ⁄2 "bores)EXTRA EXTENSION (EE)• Double acting, per inch of extension:3⁄4 "Bore, add $0.901 1 ⁄16" Bore, add $0.901 1 ⁄2 "Bore, add $1.102" Bore, add $1.452 1 ⁄2 "Bore, add $1.553" Bore, add $1.80HIGH TEMPERATURE SEALS (V)Double Acting DXDE04 Bore $17.70 $21.1509 Bore $20.35 $23.8017 Bore $21.60 $27.8031 Bore $31.70 $37.3550 Bore $34.50 $40.1570 Bore $37.50 $44.10OPTIONS FOR EACH BORE SIZE: continued…EXTRA EXTENSION (EE)• DXDE, per inch of extension:(added to each end)3⁄4 "Bore, add $1.101 1 ⁄16" Bore, add $1.101 1 ⁄2 "Bore, add $2.002" Bore, add $2.102 1 ⁄2 "Bore, add $2.503" Bore, add $2.60PORTS ROTATED (K)*(Rotates ports and cushion screw location 90° clockwise)MAGNETIC PISTON (prefix M)3⁄4 "Bore, add $9.601 1 ⁄16" Bore, add $11.901 1 ⁄2 "Bore, add $14.302" Bore, add $16.702 1 ⁄2 "Bore, add $16.703" Bore, add $29.80MINI SWITCH TRACKS on all bore sizesMust specify track(s) for use with Bimba’s miniatureposition sensing (T2, T3, T4 –Add $2.90 per track. Seepage 1.9 for track location details. See PositionSensing Solutions, page 8.3 for switch selectioninformation.ROD WIPER (W) (Available on 3 ⁄4 ", 1 1 ⁄16" and 1 1 ⁄2 "bores)• Double acting, add $2.90• DXDE add $5.80PIVOT BUSHING (Y)*MOLYCOATED BODY (F)• Add $2.70 per inch of strokeNON-LUBE SERVICE (E)See corresponding standard Original Linebore size catalog page for pricing.*Consult local distributor for pricing.•Cylinders are supplied with adjustable cushions on both ends. To order cushion on one end only, specify CF (front headcushion only), or CR (rear head cushion only), or CS (one end only) and deduct from base price as shown.(ex: 3 ⁄4 "bore, cushion on front head only –CF-04 □ -D;3⁄4 "bore, cushion on rear head only –CR-04□ -D;3⁄4 "DXDE model, cushion on one side only –CS-04-D).□ Enter Stroke Length as 3rd DigitMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSC-04□ -D$32.20BASE PRICEAdd $1.65 per inch of strokeCushion one end only,deduct $6.55 from base price.CF-04□ -D (Front only)CR-04□ -D (Rear only)3/4" BoreAir Cylinders with Adjustable CushionsDouble Acting –Air Return –Front Nose MountingStandard Stroke Lengths:1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Rod WiperOptional Accessory:D-129 Mounting BracketBase Weight: .24Adder Per Inch of Stroke: .03*U.S. Patent nos. 4,794,681 and 4,862,786All prices are F.O.B. Monee, Illinois and are subject to change without notice1.68

Air Cylinders with Adjustable Cushions3/4" BoreAir Cylinders with Adjustable Cushions (continued)MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSC-04 □ -DXP$38.55BASE PRICEAdd $1.65 per inch of strokeCushion one end only,deduct $6.55 from base price.CF-04□ -DXP (Front only)CR-04□ -DXP (Rear only)C-04□ - DXDE$47.25BASE PRICEAdd $2.15 per inch of strokeCushion one end only,deduct $6.55 from base price.CS-04□ -DXDE (One end only)C-09□ -D$36.80BASE PRICEAdd $1.65 per inch of strokeCushion one end only,deduct $7.10 from base price.CF-09□ -D (Front only)CR-09□ -D (Rear only)Double Acting –Double End orRear Pivot Mounting –Air ReturnStandard Stroke Lengths:1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7", 8",9", 10", 11", 12"Maximum Stroke –32"Stainless Steel Rod StandardOptional Rod WiperOptional Accessories:D-129 Mounting BracketD-13498-A Pivot BracketD-166-3 Piston Rod ClevisBase Weight: .29Adder Per Inch of Stroke: .03Double Acting –Double End Rod –Air Return –Double End MountingStandard Stroke Lengths:1", 2", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Rod WiperOptional Accessory:D-129 Mounting BracketBase Weight: .30Adder Per Inch of Stroke: .061-1/16" BoreAir Cylinders with Adjustable CushionsMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSDouble Acting –Air Return –Front Nose MountingStandard Stroke Lengths:1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Rod WiperOptional Accessory:D-129 Mounting BracketBase Weight: .38Adder Per Inch of Stroke: .04Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.69ForTechnical Assistance: 800-442-4622

Air Cylinders with Adjustable Cushions1-1/16" BoreAir Cylinders with Adjustable Cushions (continued)MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSC-09□ -DXP$43.40BASE PRICEAdd $1.65 per inch of strokeCushion one end only,deduct $7.10 from base price.CF-09□ -DXP (Front only)CR-09□ -DXP (Rear only)Double Acting –UniversalMounting Pivot, or Double EndMounting –Air ReturnStandard Stroke Lengths:1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7", 8",9", 10", 11", 12"Maximum Stroke –32"Stainless Steel Rod StandardOptional Rod WiperOptional Accessories:D-13498-A Pivot BracketD-129 Mounting BracketD-166-1 Piston Rod ClevisBase Weight: .44Adder Per Inch of Stroke: .04C-09□ - DXDE$52.15BASE PRICEAdd $2.15 per inch of strokeCushion one end only,deduct $7.10 from base price.CS-09□ -DXDE (One end only)Double Acting –Double End Rod –Air Return –Double End MountingStandard Stroke Lengths:1", 2", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Rod WiperOptional Accessory:D-129 Mounting BracketBase Weight: .46Adder Per Inch of Stroke: .08MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSC-17□ -D$54.80BASE PRICEAdd $2.55 per inch of strokeCushion one end only,deduct $8.30 from base price.CF-17□ -D (Front only)CR-17□ -D (Rear only)1-1/2" BoreAir Cylinders with Adjustable CushionsDouble Acting –Air Return –Front Nose MountingStandard Stroke Lengths:1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Rod WiperOptional Accessory:D-241 Mounting BracketBase Weight: .76Adder Per Inch of Stroke: .09All prices are F.O.B. Monee, Illinois and are subject to change without notice1.70

Air Cylinders with Adjustable Cushions1-1/2" BoreAir Cylinders with Adjustable Cushions (continued)MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSC-17 □ -DP$59.90BASE PRICEAdd $2.55 per inch of strokeCushion one end only,deduct $8.30 from base price.CF-17□ -DP (Front only)CR-17□ -DP (Rear only)C-17□ -DX$63.15BASE PRICEAdd $2.55 per inch of strokeCushion one end only,deduct $8.30 from base price.CF-17□ -DX (Front only)CR-17□ -DX (Rear only)C-17□ - DXDE$80.35BASE PRICEAdd $4.00 per inch of strokeCushion one end only,deduct $8.30 from base price.CS-17□ -DXDE (One end only)Double Acting –Pivot Type –AirReturn –Rear Pivot MountingStandard Stroke Lengths:1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7", 8",9", 10", 11", 12"Maximum Stroke –32"Stainless Steel Rod StandardOptional Rod WiperOptional Accessories:D-231-1 Piston Rod ClevisD-229 Pivot BracketsBase Weight: .77Adder Per Inch of Stroke: .09Double Acting –Double EndMounting –Air ReturnStandard Stroke Lengths:1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7", 8",9", 10", 11", 12"Maximum Stroke –32"Stainless Steel Rod StandardOptional Rod WiperOptional Accessory:D-241 Mounting BracketBase Weight: .84Adder Per Inch of Stroke: .09Double Acting –Double End Rod –Air Return –Double End MountingStandard Stroke Lengths:1", 2", 3", 4", 5", 6", 7", 8", 9", 10",11", 12"Maximum Stroke –12"Stainless Steel Rod StandardOptional Rod WiperOptional Accessory:D-241 Mounting BracketBase Weight: .90Adder Per Inch of Stroke: .18Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.71ForTechnical Assistance: 800-442-4622

Air Cylinders with Adjustable Cushions2" BoreAir Cylinders with Adjustable CushionsMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSC-31□ -D$92.55BASE PRICEAdd $2.90 per inch of strokeCushion one end only,deduct $13.60 from base price.CF-31□ -D (Front only)CR-31□ -D (Rear only)Double Acting –Air Return –Front Nose MountingStandard Stroke Lengths:1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessories:D-615 Mounting BracketD-508 Mounting NutBase Weight: 1.64Adder Per Inch of Stroke: .152.08CADJ.LSCREW (FRONT)CADJ.LSCREW (REAR).77.56.88.381.191/2-20 UNF-2A(É”.625 ROD).311.92.1211/4-12 UNF-2A.50 WRENCH FLATSÉ”1.372/1.375 PILOT5.06 +STROKE2X 1/4 NPT PORTSTAINLESS.47C-31□ -DXP$112.60BASE PRICEAdd $2.90 per inch of strokeCushion one end only,deduct $13.60 from base price.CF-31□ -DXP (Front only)CR-31□ -DXP (Rear only)C-31□ - DXDE$140.20BASE PRICEAdd $4.15 per inch of strokeCushion one end only,deduct $13.60 from base price.CS-31□ -DXDE (One end only)Double Acting –Double End orRear Pivot Mounting –Air ReturnStandard Stroke Lengths:1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7", 8",9", 10", 11", 12"Maximum Stroke –32"Stainless Steel Rod StandardOptional Accessories:D-615 Mounting BracketD-620 Pivot BracketD-231-3 Piston Rod ClevisD-508 Mounting NutBase Weight: 1.68Adder Per Inch of Stroke: .15Double Acting –Double End Rod –Air Return –Double End MountingStandard Stroke Lengths:1", 2", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessories:D-615 Mounting BracketD-508 Mounting NutBase Weight: 1.99Adder Per Inch of Stroke: .24*U.S. Patent nos. 4,794,681 and 4,862,786All prices are F.O.B. Monee, Illinois and are subject to change without notice1.72

Air Cylinders with Adjustable CushionsMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSC-50□ -D$114.50BASE PRICEAdd $3.10 per inch of strokeCushion one end only,deduct $17.00 from base price.CF-50□ -D (Front only)CR-50□ -D (Rear only)C-50 □ -DXP$130.20BASE PRICEAdd $3.10 per inch of strokeCushion one end only,deduct $17.00 from base price.CF-50□ -DXP (Front only)CR-50□ -DXP (Rear only)C-50□ - DXDE$172.20BASE PRICEAdd $4.85 per inch of strokeCushion one end only,deduct $17.00 from base price.CS-50□ -DXDE (One end only)2-1/2" BoreAir Cylinders with Adjustable CushionsDouble Acting –Air Return –Front Nose MountingStandard Stroke Lengths:1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessories:D-615-1 Mounting BracketD-2540 Mounting NutBase Weight: 2.21Adder Per Inch of Stroke: .17Double Acting –UniversalMounting Pivot, or Double EndMounting –Air ReturnStandard Stroke Lengths:1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7", 8",9", 10", 11", 12"Maximum Stroke –32"Stainless Steel Rod StandardOptional Accessories:D-615-1 Mounting BracketD-620 Pivot BracketD-231-3 Piston Rod ClevisD-2540 Mounting NutBase Weight: 2.33Adder Per Inch of Stroke: .17Double Acting –Double End Rod –Air Return –Double End MountingStandard Stroke Lengths:1", 2", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessories:D-615-1 Mounting BracketD-2540 Mounting NutBase Weight: 2.38Adder Per Inch of Stroke: .34Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.73ForTechnical Assistance: 800-442-4622

C-70□ -D$150.40BASE PRICEAdd $3.80 per inch of strokeCushion one end only,deduct $19.25 from base price.CF-70□ -D (Front only)CR-70□ -D (Rear only)Air Cylinders with Adjustable Cushions3" BoreAir Cylinders with Adjustable CushionsMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSDouble Acting –Air Return –Front Nose MountingStandard Stroke Lengths:1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessories:D-19127 Mounting BracketD-5379 Mounting NutBase Weight: 3.81Adder Per Inch of Stroke: .26C-70□ -DXP$169.00BASE PRICEAdd $3.80 per inch of strokeCushion one end only,deduct $19.25 from base price.CF-70□ -DXP (Front only)CR-70□ -DXP (Rear only)C-70□ - DXDE$187.60BASE PRICEAdd $5.05 per inch of strokeCushion one end only,deduct $19.25 from base price.CS-70□ -DXDE (One end only)Double Acting –Pivot Type –AirReturn –Rear Pivot MountingStandard Stroke Lengths:1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7", 8",9", 10", 11", 12"Maximum Stroke –32"Stainless Steel Rod StandardOptional Accessories:D-8314-A Piston Rod ClevisD-13512-A Pivot BracketsD-5379 Mounting NutBase Weight: 3.97Adder Per Inch of Stroke: .26Double Acting –Double End Rod –Air Return –Double End MountingStandard Stroke Lengths:1", 2", 3", 4", 5", 6", 7", 8", 9", 10",11", 12"Maximum Stroke –12"Stainless Steel Rod StandardOptional Accessories:D-19127 Mounting BracketD-5379 Mounting NutBase Weight: 4.15Adder Per Inch of Stroke: .52•Accessories – For 3 ⁄4 "bore, see page 1.28. For 1 1 ⁄16" bore, see page 1.40. For 1 1 ⁄2 "bore, see page 1.53.For 2" bore, see page 1.60. For 2 1 ⁄2 "bore, see page 1.62. For 3" bore, see page 1.64.All prices are F.O.B. Monee, Illinois and are subject to change without notice1.74

Air Cylinders with Adjustable CushionsCushionEnergyAbsorptionCylinders with air cushions provide apossible solution to destructive energies. The air cushiontraps asmall amount of exhaust air at the end of stroke, providing an air pocket thatdecelerates the load. This reduces the potentially destructive energy being transmitted to thecylinder and other components. The following is abrief explanation on how to determine theenergy level of your application and decide if an air cushion can provide adequate energyabsorption. For amore detailed description, consult the factory at 1-800-44-BIMBA.Step 1.Determine the load to be stopped by the cylinder.Standard AirCylindersThree-PositionCylindersCushionCylindersStep 2.Step 3.Example:Determine the velocity at which the load impacts the cylinder endcap.Calculate the energy the cylinder generates. Use the following equation:energy (e) =w(— xv 2 )+(pxk)64w=weight of the load (lbs.)V=velocity of the cylinder as the piston impacts the endcap (feet per second)p=driving pressure (psi)k=bore constantC-316-D at 80 psi with total load of 8lbs.driving pressure (p) =80psitotal load (w) =8lbs.bore constant (k) =.24maximum velocity (v) =6fps=(8/64) x(6 2 )+(80 x.24) =23.7 ft. lbs.MRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableMaximum Energy Calculation DataBore Max Energy k(ft-lbs)04 4.47 0.0309 10.40 0.0517 18.80 0.1131 27.60 0.2450 40.11 0.3770 77.72 0.58CushionLengths0.75"0.75"0.75"0.90"0.90"0.99"All StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylinders1.75ForTechnical Assistance: 800-442-4622

MRS ® Magnetic Reed Switch Air CylindersSpecifically designed to operate Bimba positionsensing switches to actuate programmable controllers,relays, solenoids, timers, or any other electricallyoperated equipment. MRS cylinders have an additionalgroove in the piston to accommodate amagnet. Theydiffer from the Moption because they combine featuresof the “Z” line with Original Line construction; checkdimensional drawings for each size for more specificinformation. Type 303 stainless steel rods are standard.NO CHARGE:• MAGNALUBE G(G)• NOTHREAD (NT)MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSMRS-02 □ -D$25.75BASE PRICEAdd $1.65 per inch of strokeOPTIONS:SWITCH TRACK for Heavy Duty Track Mounted Switches• Must specify Zfor one track, ZTT for 2tracks –add$2.90 per track. See page 1.86 for track information.See Position Sensing Solutions, page 8.3 for switchselection information.□ Enter Stroke Length as 3rd Digit9/16" BoreMRS Air CylindersNose MountStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Accessory:D-770 Mounting BracketBase Weight: .10Adder Per Inch of Stroke: .01OPTIONS continued…DOUBLE ACTING BUMPERS (B)• 9 ⁄16", add $4.20 and .125" to length• 3 ⁄4 "and 1 1 ⁄16" add $4.20 and .250" to length• 1 1 ⁄4 "and 1 1 ⁄2 "add $5.05 and .250" to length• 1 3 ⁄4 ", 2" and 2 1 ⁄2 "add $6.45 and .250" to lengthMOLYCOATED BODY (F)• Add $2.70 per inch of strokeEXTRA EXTENSION (EE)• Double acting, per inch of extension:9⁄16", 3 ⁄4 "and 1 1 ⁄16" Bore, add $0.901 1 ⁄4 "Bore, add $1.101 1 ⁄2 "and 1 3 ⁄4 "Bore, add $1.302" Bore, add $1.502 1 ⁄2 "Bore, add $1.60• DXDE, per inch of extension:(added to both ends)9⁄16", 3 ⁄4 "and 1 1 ⁄16" Bore, add $1.101 1 ⁄4 "Bore, add $1.601 1 ⁄2 "and 1 3 ⁄4 "Bore, add $2.002" Bore, add $2.102 1 ⁄2 "Bore, add $2.50PORTS ROTATED 90° (K)*SIDE PORTED REAR HEAD (Q)*NON-LUBE SERVICE (E)FLUOROELASTOMER/HIGH TEMPERATURE SEAL (V)See corresponding standard Original Line bore sizecatalog page for pricing of options Eand V.*Consult local distributor for pricing.SWITCH TRACK for Miniature Switches (T2, T3, T4)• Must specify track(s) for use with miniature positionsensing (T2, T3, T4) –add $2.90 per track. Seepage 1.9 for track location details. See PositionSensing Solutions, page 8.3 for switch selectioninformation.MRS-02□ -DXP$29.25BASE PRICEAdd $1.65 per inch of strokeDouble End or RearPivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7",8", 9", 10", 11", 12"Maximum Stroke –12"Optional Accessories:D-12321-A Pivot BracketD-770 Mounting BracketD-850 Rod ClevisBase Weight: .10Adder Per Inch of Stroke: .01All prices are F.O.B. Monee, Illinois and are subject to change without notice1.76

MRS ® Magnetic Reed Switch Air CylindersMRS-02□ DXDE$36.40BASE PRICEAdd $2.15 per inch of stroke9/16" BoreMRS Air Cylinders (continued)MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSDouble End Rod –Double EndMountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Accessory:D-770 Mounting BracketBase Weight: .14Adder Per Inch of Stroke: .02Standard AirCylindersThree-PositionCylindersCushionCylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSMRS-04 □ -D$26.85BASE PRICEAdd $1.65 per inch of stroke3/4" BoreMRS Air CylindersNose MountStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Accessory:D-129 Mounting BracketBase Weight: .24Adder Per Inch of Stroke: .04MRS®CylindersNon-RotatingCylindersPCCylindersMRS-04□ -DXP$29.85BASE PRICEAdd $1.65 per inch of strokeMRS-04□ DXDE$39.80BASE PRICEAdd $2.15 per inch of strokeDouble End or RearPivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7",8", 9", 10", 11", 12"Maximum Stroke –32"Optional Accessories:D-10131-A Pivot BracketD-129 Mounting BracketD-10139-A Rod ClevisBase Weight: .30Adder Per Inch of Stroke: .06Double End Rod –Double EndMountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Accessory:D-129 Mounting BracketBase Weight: .41Adder Per Inch of Stroke: .06All StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.77ForTechnical Assistance: 800-442-4622

MRS ® Magnetic Reed Switch Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSMRS-09 □ -D$32.30BASE PRICEAdd $1.65 per inch of stroke1-1/16" BoreMRS Air CylindersNose MountStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Accessory:D-8315 Mounting BracketBase Weight: .37Adder Per Inch of Stroke: .05MRS-09□ -DXP$35.75BASE PRICEAdd $1.65 per inch of strokeMRS-09□ DXDE$42.70BASE PRICEAdd $2.15 per inch of strokeDouble End or RearPivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7",8", 9", 10", 11", 12"Maximum Stroke –32"Optional Accessories:D-8321-A Pivot BracketD-8315 Mounting BracketD-8309-A Rod ClevisBase Weight: .42Adder Per Inch of Stroke: .05Double End Rod –Double EndMountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Accessory:D-8315 Mounting BracketBase Weight: .60Adder Per Inch of Stroke: .081-1/4" BoreMRS Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSMRS-12 □ -D$40.20BASE PRICEAdd $2.15 per inch of strokeNose MountStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Accessory:D-8316 Mounting BracketBase Weight: .51Adder Per Inch of Stroke: .07All prices are F.O.B. Monee, Illinois and are subject to change without notice1.78

MRS ® Magnetic Reed Switch Air Cylinders1-1/4" BoreMRS Air Cylinders (continued)MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSStandard AirCylindersMRS-12 □ -DXP$44.70BASE PRICEAdd $2.15 per inch of strokeMRS-12□ DXDE$56.55BASE PRICEAdd $3.10 per inch of strokeDouble End or RearPivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6",7", 8", 9", 10", 11", 12"Maximum Stroke –32"Optional Accessories:D-8322-A Pivot BracketD-8316 Mounting BracketD-8310-A Rod ClevisBase Weight: .61Adder Per Inch of Stroke: .05Double End Rod –Double EndMountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Accessory:D-8316 Mounting BracketBase Weight: .70Adder Per Inch of Stroke: .14Three-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylinders1-1/2" BoreMRS Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSMRS-17 □ -D$47.90BASE PRICEAdd $2.55 per inch of strokeNose MountStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Accessory:D-8317 Mounting BracketBase Weight: .74Adder Per Inch of Stroke: .10PCCylindersAll StainlessNon-RepairableAll StainlessRepairableMRS-17□ -DXP$52.30BASE PRICEAdd $2.55 per inch of strokeDouble End or RearPivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7",8", 9", 10", 11", 12"Maximum Stroke –32"Optional Accessories:D-8323-A Pivot BracketD-8317 Mounting BracketD-8311-A Rod ClevisBase Weight: .87Adder Per Inch of Stroke: .10ZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.79ForTechnical Assistance: 800-442-4622

MRS ® Magnetic Reed Switch Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSMRS-17□ -DXDE$60.30BASE PRICEAdd $4.00 per inch of stroke1-1/2" BoreMRS Air Cylinders (continued)Double End Rod –Double EndMountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Accessory:D-8317 Mounting BracketBase Weight: .94Adder Per Inch of Stroke: .201-3/4" BoreMRS Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSMRS-24 □ -D$55.20BASE PRICEAdd $2.55 per inch of strokeNose MountStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Accessory:D-8318 Mounting BracketBase Weight: 1.14Adder Per Inch of Stroke: .13MRS-24□ -DXP$60.70BASE PRICEAdd $2.55 per inch of strokeMRS-24□ -DXDE$75.95BASE PRICEAdd $4.00 per inch of strokeDouble End or RearPivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7",8", 9", 10", 11", 12"Maximum Stroke –32"Optional Accessories:D-8324-A Pivot BracketD-8318 Mounting BracketD-8312-A Rod ClevisBase Weight: 1.30Adder Per Inch of Stroke: .13Double End Rod –Double EndMountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Accessory:D-8318 Mounting BracketBase Weight: 1.40Adder Per Inch of Stroke: .26All prices are F.O.B. Monee, Illinois and are subject to change without notice1.80

MRS ® Magnetic Reed Switch Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSMRS-31 □ -D$62.35BASE PRICEAdd $2.90 per inch of stroke2" BoreMRS Air CylindersNose MountStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Accessory:D-8319 Mounting BracketBase Weight: 1.55Adder Per Inch of Stroke: .15Standard AirCylindersThree-PositionCylindersCushionCylindersMRS-31□ -DXP$68.45BASE PRICEAdd $2.90 per inch of strokeDouble End or RearPivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7",8", 9", 10", 11", 12"Maximum Stroke –32"Optional Accessories:D-8325-A Pivot BracketD-8319 Mounting BracketD-8313-A Rod ClevisBase Weight: 1.80Adder Per Inch of Stroke: .15MRS®CylindersNon-RotatingCylindersMRS-31□ DXDE$81.50BASE PRICEAdd $4.15 per inch of strokeDouble End Rod –Double EndMountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Accessory:D-8319 Mounting BracketBase Weight: 1.90Adder Per Inch of Stroke: .302-1/2" BoreMRS Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSMRS-50 □ -D$79.15BASE PRICEAdd $3.10 per inch of strokeNose MountStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Accessory:D-8320 Mounting BracketBase Weight: 2.48Adder Per Inch of Stroke: .20PCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.81ForTechnical Assistance: 800-442-4622

MRS ® Magnetic Reed Switch Air Cylinders2-1/2" BoreMRS Air Cylinders (continued)MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSMRS-50 □ -DXP$88.15BASE PRICEAdd $3.10 per inch of strokeMRS-50□ DXDE$103.60BASE PRICEAdd $4.85 per inch of strokeDouble End or RearPivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6", 7",8", 9", 10", 11", 12"Maximum Stroke –32"Optional Accessories:D-8326-A Pivot BracketD-8320 Mounting BracketD-8314-A Rod ClevisBase Weight: 2.90Adder Per Inch of Stroke: .20Double End Rod –Double EndMountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke –12"Optional Accessory:D-8320 Mounting BracketBase Weight: 3.15Adder Per Inch of Stroke: .40D-770$3.05MRS Accessories9/16"BoreAccessoriesD-850$3.45D-12321-A$3.75Mounting BracketD-154$.40Rod ClevisPivot BracketMounting NutAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.82

MRS Accessories continuedD-129$3.403/4" BoreAccessoriesD-10139-A$6.55D-10131-A$3.75Standard AirCylindersThree-PositionCylindersCushionCylindersMounting BracketD-9$.50Rod ClevisPivot BracketMRS®CylindersNon-RotatingCylindersMounting NutPCCylindersD-8315$3.351-1/16"BoreAccessoriesD-8309-A$6.65D-8321-A$5.00All StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersMounting BracketD-3556$.80Rod ClevisPivot BracketRod LockCylinders500 HydraulicCylindersMounting NutHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.83ForTechnical Assistance: 800-442-4622

MRS Accessories continuedD-8316$4.501-1/4" BoreAccessoriesD-8310-A$6.60D-8322-A$7.05Mounting BracketD-2545$1.20Rod ClevisPivot BracketMounting NutD-8317$5.801-1/2" BoreAccessoriesD-8311-A$7.75D-8323-A$7.20Mounting BracketD-1331$2.35Rod ClevisPivot BracketMounting NutAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.84

MRS Accessories continuedD-8318$6.851-3/4" BoreAccessoriesD-8312-A$8.40D-8324-A$10.70Standard AirCylindersThree-PositionCylindersCushionCylindersMounting BracketRod ClevisPivot BracketMRS®CylindersD-8484$4.85Non-RotatingCylindersMounting NutPCCylindersD-8319$7.552" BoreAccessoriesD-8313-A$11.05D-8325-A$12.45All StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersMounting BracketD-508$4.85Rod ClevisPivot BracketRod LockCylinders500 HydraulicCylindersMounting NutHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.85ForTechnical Assistance: 800-442-4622

MRS Accessories continuedD-8320$7.952-1/2" BoreAccessoriesD-8314-A$12.45D-8326-A$11.30Mounting BracketD-2540$4.35Rod ClevisPivot BracketMounting NutFor Original Line cylinders, including MRS cylinders, with -T2, T3, and T4 optionsOPTION T2.29Switch Track OptionsOPTION T31.25mm(.050in)OPTION T4.23Switch Track for use with Bimba MR, MS, MSC, and MSK SwitchesMiniature Position Sensing track lengths can now bepurchased separately for field mounting of custom tracklocations.Simply specify the length of track desired after the part number.Mounting recommendations:Bores Part Number List Price Adder per Inch• Clean body with acetone. Remove all oil frombody surface.007 -04 D-74168-A-length $2.90 $1.05• Avoid mounting track over rolled construction. 06 -31 D-78527-A-length 2.90 1.15Locate edge of track 0.175" from rolled50 -70 D-78528-A-length 2.90 1.35construction.Loctite U-05FL or similar adhesive isrecommended (not included).• Use asolid continuous bead of glue for theentire length of track used. Bead should fill center channel of track.• Adhere to recommended cure times as specified by the glue manufacturer.BoreBore AFor MRS cylinders with –Z or –ZTT optionsFor 9/16"and 3/4"BoreFor 1-1/16"to 2-1/2"BoreDesignator02 9/16" 1.0004 3/4" 1.3809 1-1/16" 1.5012 1-1/4" 1.6817 1-1/2" 1.9124 1-3/4" 2.2031 2 2.4350 2-1/2" 2.98All prices are F.O.B. Monee, Illinois and are subject to change without notice1.86

Non-Rotating Original Line Air CylindersBimba’s new Non-Rotating Original Line stainless steel body air cylinder design consists of aunique square piston rodwith rounded corners. The square rod prevents rotation better than other rod configurations, and the rounded cornersprovide longer seal life than conventional hexagon rods. The unusual geometry of the square rod also provides superiorrotation control. All bore sizes have arotational control of less than or equal to ±3 degrees. The special high strengthaluminum alloy rod guide provides high load carrying capability and abrasion resistance. The urethane-based rod sealprovides excellent seal life and leak-free service. The Non-Rotating Original Line cylinder is dimensionally interchangeablewith the standard Original Line stainless steel cylinder.9/16"Bore Non-Rotating Air Cylinders• New! Stainless Steel Piston Rod Standard.• Unique Square Piston Rod with RoundedCorners.• High Strength Aluminum Alloy Rod Guide.• Urethane-based Rod Seal.• Buna N“U’’ Cup Piston Seal.• Pressure Rating -250 PSI Maximum (Air only)• Available in Double Acting and Reverse ActingModels.• Enclosed Spring Force: 2lbs. Relaxed -4lbs.Compressed.• Standard Buna NSeals Temperature Rangeof -20°F (-25°C) to 200°F (95°C)□ Enter Stroke Length as 3rd DigitNR-02□ -D$26.25BASE PRICEAdd $1.95 per inch of strokeOPTIONSNO CHARGE:• MAGNALUBE ® G(G)• SIDE PORTED REAR HEAD (Q)• PORTS ROTATED (K)REVERSE ACTING BUMPERS (B)• $3.20 additional• Add .062 to overall lengthDOUBLE ACTING BUMPERS (B)• $4.45 additional• Add .125 to overall lengthMOLYCOATED BODY (F)• Add $2.80 per inch of strokeEXTRA EXTENSION (EE)• Add $1.00 per inch of extensionMAGNET (prefix M) -Add $10.10• Reverse acting add .125’’ tooverall length• Must specify track(s) for use with miniatureposition sensing (T2, T3, T4) –add $2.90 pertrack. See page 1.9 for track location details. SeePosition Sensing Solutions, page 8.3 for switchselection information.HIGH TEMPERATURE SEALS (V)Temperature Range :0°to400°F (-18° to 205°C)• Double acting, add $11.45• Reverse acting, add $8.00MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSDouble Acting – Air Return-Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1 " , 1 1 ⁄2 " , 2 ", 2 1 ⁄2 " ,3" ,4"Maximum Stroke 10"Optional Accessory:D-770 Mounting BracketBase Weight: .09Adder Per Inch of Stroke: .02® Magnalube is aregistered trademark ofthe Carleton-Stuart Corporation.Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.87ForTechnical Assistance: 800-442-4622

9/16"Bore Non-Rotating Air CylindersNR-02□ -DXP$34.75BASE PRICEAdd $1.95 per inch of stroke9/16" BoreNon-Rotating Air Cylinders (continued)MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSDouble Acting –Double End orRear Pivot Mounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke 10"Optional Accessories:D-770 Mounting NutD-850 Rod ClevisD-12321-A Pivot BracketBase Weight: .09Adder Per Inch of Stroke: .02NR-02□ -R$30.05BASE PRICEAdd $2.60 per inch of strokeNR-02□ -RP$38.35BASE PRICEAdd $2.60 per inch of strokeReverse Single Acting –PullType –Rod Normally Extended –Spring Return –Front NoseMountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3"Maximum Stroke 4"Optional Accessory:D-770 Mounting BracketBase Weight: .08Adder Per Inch of Stroke: .04Reverse Single Acting –Pivotand Pull Type –Rod NormallyExtended –Spring Return –RearPivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3"Maximum Stroke 4"Optional Accessories:D-850 Rod ClevisD-12321-A Pivot BracketBase Weight: .08Adder Per Inch of Stroke: .04All prices are F.O.B. Monee, Illinois and are subject to change without notice1.88

3/4" Bore Non-Rotating Air Cylinders• New! Stainless Steel Piston Rod Standard.• Unique Square Piston Rod with RoundedCorners.• High Strength Aluminum Alloy Rod Guide.• Urethane-based Rod Seal.• Buna N“U’’ Cup Piston Seal.• Pressure Rating –250 PSI Maximum (Air only)• Available in Double Acting and Reverse ActingModels.• Enclosed Spring Force: 3lbs. Relaxed –6lbs.Compressed.• Standard Buna NSeals Temperature Rangeof -20ºF (-25ºC) to 200ºF (95ºC)□ Enter Stroke Length as 3rd DigitNR-04□ -D$27.55BASE PRICEAdd $2.00 per inch of strokeOPTIONSNO CHARGE:• MAGNALUBE ® G(G)• PORTS ROTATED (K)• SIDE PORTED REAR HEAD (Q)• PIVOT BUSHING (Y)REVERSE ACTING BUMPERS (B)• $3.20 additional• Add .062 to overall lengthDOUBLE ACTING BUMPERS (B)• $4.45 additional• Add .125 to overall lengthMOLYCOATED BODY (F)• Add $2.80 per inch of strokeEXTRA EXTENSION (EE)• Add $1.05 per inch of extensionMAGNET (prefix M) -Add $10.10• Reverse acting add .125" to overall length• Must specify track(s) for use with miniatureposition sensing (T2, T3, T4) –add $2.90 per track.See page 1.9 for track location details. SeePosition Sensing Solutions, page 8.3 for switchselection information.HIGH TEMPERATURE SEALS (V)Temperature Range :0°to400°F (-18° to 205°C)• Reverse acting, add $8.00• Double acting, add $11.45MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSDouble Acting –Air Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke 12"Option Accessory:D-129 Mounting BracketBase Weight :.21Adder Per Inch of Stroke: .03Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableNR-04□ -DXP$35.75BASE PRICEAdd $2.00 per inch of strokeDouble Acting –Double End orRear Pivot Mounting –Air ReturnStandard Stroke Lengths:1⁄2 ’’, 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5",6", 7", 8", 9", 10", 11", 12"Maximum Stroke 24"Optional Accessories:D-129 Mounting BracketD-166-3 Rod ClevisD-13498-A Pivot BracketBase Weight: .29Adder Per Inch of Stroke: .03ZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.89ForTechnical Assistance: 800-442-4622

3/4" Bore Non-Rotating Air Cylinders3/4" BoreNon-Rotating Air Cylinders (continued)MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSNR-04□ -R$30.30BASE PRICEAdd $2.60 per inch of strokeReverse Single Acting –PullType –Rod Normally Extended –Spring Return –Front NoseMountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke 6"Optional Accessory:D-129 Mounting BracketBase Weight: .18Adder Per Inch of Stroke: .07NR-04□ -RP$39.15BASE PRICEAdd $2.60 per inch of strokeBFNR-04□ -D$45.40BASE PRICEAdd $2.00 per inch of strokeBFNR-04□ -R$48.90BASE PRICEAdd $2.60 per inch of strokeBFTNR-04□ -D$59.85BASE PRICEAdd $2.00 per inch of strokeReverse Single Acting –PullType –Rod Normally Extended –Spring Return –Rear PivotMountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke 6"Optional Accessories:D-167 Mounting BracketsD-166-3 Piston Rod ClevisBase Weight: .18Adder Per Inch of Stroke: .07Double Acting –Front BlockMounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ",3", 4", 5", 6"Maximum Stroke 12"Base Weight: .22Adder Per Inch of Stroke: .03Pull Type –Front Block MountingRod Normally Extended –ReverseSingle Acting –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2”, 2 1 ⁄2 ", 3", 4"Maximum Stroke 6"Base Weight: .19Adder per inch of stroke: .07Double Acting –Front BlockTrunnion Mounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke 12"Optional Accessories:TRB-2 Trunnion BracketsD-166-3 Rod ClevisBase Weight: .29Adder Per Inch of Stroke: .03.38 MIN, OPPOSITE SIDE.38 MIN, OPPOSITE SIDEAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.90

1-1/16" Bore Non-Rotating Air Cylinders• New! Stainless Steel Piston Rod Standard.• Unique Square Piston Rod with RoundedCorners.• High Strength Aluminum Alloy Rod Guide.• Urethane-based Rod Seal.• Buna N“U’’ Cup Piston Seal.• Pressure Rating –250 PSI Maximum (Air only)• Available in Double Acting and Reverse ActingModels.• Enclosed Spring Force: 6lbs. Relaxed –12lbs.Compressed.• Standard Buna NSeals Temperature Rangeof -20ºF (-25ºC) to 200º F(95ºC)□ Enter Stroke Length as 3rd DigitOPTIONSNO CHARGE:• MAGNALUBE ® G(G)• PORTS ROTATED (K)• SIDE PORTED REAR HEAD (Q)• PIVOT BUSHING (Y)REVERSE ACTING BUMPERS (B)• $3.20 additional• Add .062 to overall lengthDOUBLE ACTING BUMPERS (B)• $4.45 additional• Add .125 to overall lengthMOLYCOATED BODY (F)• Add $2.80 per inch of strokeEXTRA EXTENSION (EE)• Add $1.05 per inch of extensionMAGNET (prefix M) -Add $12.55• Reverse acting add .125’" to overall length• Must specify track(s) for use with miniatureposition sensing (T2, T3, T4) –add $2.90 per track.See page 1.9 for track location details. See PositionSensing Solutions, page 8.3 for switch selectioninformation.HIGH TEMPERATURE SEALS (V)Temperature Range :0°to400°F (-18° to 205°C)• Reverse acting, add $8.90• Double acting, add $13.70Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSNR-09□ -D$31.25BASE PRICEAdd $2.00 per inch of strokeNR-09□ -DXP$42.40BASE PRICEAdd $2.00 per inch of strokeDouble Acting –Air Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke 12"Option Accessory:D-129 Mounting BracketBase Weight :.33Adder Per Inch of Stroke: .05Double Acting –Double End orRear Pivot Mounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3",4", 5", 6", 7", 8", 9", 10", 11", 12"Maximum Stroke 24"Optional Accessories:D-129 Mounting BracketD-166-1 Rod ClevisD-13498-A Pivot BracketBase Weight: .33Adder Per Inch of Stroke: .05PCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylindersNR-09□ -R$33.90BASE PRICEAdd $3.25 per inch of strokeReverse Single Acting –PullType –Rod Normally Extended –Spring Return –Front NoseMountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke 6"Optional Accessory:D-129 Mounting BracketBase Weight: .24Adder Per Inch of Stroke: .16500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.91ForTechnical Assistance: 800-442-4622

1-1/16" Bore Non-Rotating Air Cylinders1-1/16" BoreNon-Rotating Air Cylinders (continued)MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSNR-09□ -RP$40.25BASE PRICEAdd $3.25 per inch of strokeBFNR-09□ -D$50.60BASE PRICEAdd $2.00 per inch of strokeBFNR-09□ -R$55.35BASE PRICEAdd $3.25 per inch of strokeBFTNR-09□ -D$61.55BASE PRICEAdd $2.00 per inch of strokeReverse Single Acting –Pivot orPull Type –Rod Normally ExtendedSpring Return –Rear PivotMountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke 6"Optional Accessories:D-166-1 Piston Rod ClevisD-167 Mounting BracketBase Weight: .22Adder Per Inch of Stroke: .16Double Acting –Front BlockMounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ",3", 4", 5", 6"Maximum Stroke 12"Base Weight: .49Adder Per Inch of Stroke: .05Reverse Single Acting –FrontBlock Mounting –Rod NormallyExtended –Reverse Single Acting –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke 6"Base Weight: .36Adder Per Inch of Stroke: .16Double Acting –Front BlockTrunnion Mounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke 12"Optional Accessories:TRB-2 Trunnion BracketsD-166-1 Rod ClevisBase Weight: .49Adder Per Inch of Stroke: .05.31 MIN, OPPOSITE SIDE.31 MIN, OPPOSITE SIDEAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.92

1-1/2" Bore Non-Rotating Air Cylinders• New! Stainless Steel Piston Rod Standard.• Unique Square Piston Rod with RoundedCorners.• High Strength Aluminum Alloy Rod Guide.• Urethane-based Rod Seal.• Buna N“U’’ Cup Piston Seal.• Pressure Rating –250 PSI Maximum (Air only)• Available in Double Acting and Reverse ActingModels.• Enclosed Spring Force: 8.5 lbs. Relaxed –17lbs.Compressed.• Standard Buna NSeals Temperature Rangeof -20ºF (-25ºC) to 200ºF (95ºC)□ Enter Stroke Length as 3rd DigitNR-17□ -D$56.70BASE PRICEAdd $2.95 per inch of strokeOPTIONSNO CHARGE:• MAGNALUBE ® G(G)• PORTS ROTATED (K)• SIDE PORTED REAR HEAD (Q)• PIVOT BUSHING (Y)REVERSE ACTING BUMPERS (B)• $3.40 additional• Add .062 to overall lengthDOUBLE ACTING BUMPERS (B)• $5.35 additional• Add .125 to overall lengthMOLYCOATED BODY (F)• Add $2.80 per inch of strokeEXTRA EXTENSION (EE)• Add $1.55 per inch of extensionMAGNET (prefix M) –Add $15.15• Reverse acting add .125" to overall length• Must specify track(s) for use with miniatureposition sensing (T2, T3, T4) –add $2.90 per track.See page 1.9 for track location details. SeePosition Sensing Solutions, page 8.3 for switchselection information.HIGH TEMPERATURE SEALS (V)Temperature Range :0°to400°F (-18°to 205°C)• Reverse acting, add $10.50• Double acting, add $15.15MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSDouble Acting –Air Return –Front Nose Mounting –Standard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ",3", 4", 5", 6"Maximum Stroke 12"Optional Accessory:D-241 Mounting BracketBase Weight: .69Adder Per Inch of Stroke: .08Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableNR-17□ -DXP$69.40BASE PRICEAdd $2.95 per inch of strokeDouble Acting –Double End orRear Pivot Mounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2’’, 2 1 ⁄2 ", 3",4", 5", 6", 7", 8", 9", 10", 11", 12"Maximum Stroke 24"Optional Accessories:D-241 Mounting BracketD-231-1 Rod ClevisD-229 Pivot BracketBase Weight: .82Adder Per Inch of Stroke: .08ZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.93ForTechnical Assistance: 800-442-4622

1-1/2" Bore Non-Rotating Air Cylinders1-1/2" BoreNon-Rotating Air Cylinders (continued)MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSNR-17□ -R$55.80BASE PRICEAdd $4.60 per inch of strokeReverse Single Acting –PullType –Rod Normally ExtendedSpring Return –Spring force 8.5lbs. relaxed, 17 lbs. compressed -Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke 6"Optional Accessory:D-241 Mounting BracketBase Weight: .44Adder Per Inch of Stroke: .22.757/16-20 UNF-2A.47 SQ ROD.75 +STROKE.621.25.09 2X 1/8 NPTÿ .749.7463/4-16 MTG NUT2.94 +2.00 PER 1.00 STROKE.88.25ÿ 1.56NR-17□ -RP$63.60BASE PRICEAdd $4.60 per inch of strokeReverse Single Acting –Pivotand Pull Type –Rod NormallyExtended –Spring Return –SpringForce 8.5 lbs. relaxed, 17 lbs.compressed –Rear Pivot MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke 6"Optional Accessories:D-231-1 Piston Rod ClevisD-229 Mounting BracketBase Weight: .45Adder Per Inch of Stroke: .22.757/16-20 UNF-2A.47 SQ ROD.75 +STROKE.621.25.09 2X 1/8 NPTÿ .749.7463/4-16 UNF-2A3.62 +2.00 PER 1.00 STROKE .38.81.50ÿ .375 PINÿ 1.561.00.62BFNR-17□ -D$80.00BASE PRICEAdd $2.95 per inch of strokeBFNR-17□ -R$83.10BASE PRICEAdd $4.60 per inch of strokeBFTNR-17□ -D$92.10BASE PRICEAdd $2.95 per inch of strokeDouble Acting –Front BlockMounting –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ",3", 4", 5", 6"Maximum Stroke 12"Base Weight: .99Adder Per Inch of Stroke: .08Pull Type –Front Block Mounting–Rod Normally Extended –Reverse SingleActing –Spring ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke 6"Base Weight: .96Adder Per Inch of Stroke: .22Double Acting –Front BlockTrunnion Mounting –Spring ReturnStandard Stroke Lengths:1⁄2 "’, 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke 12"Optional Accessories:TRB-2 Trunnion BracketsD-231-1 Rod ClevisBase Weight: 1.06Adder Per Inch of Stroke: .08.38 MIN, OPPOSITE SIDE.38 MIN, OPPOSITE SIDEAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.94

2" Bore Non-Rotating Air Cylinders• New! Stainless Steel Piston Rod Standard.• Unique Square Piston Rod with RoundedCorners.• High Strength Aluminum Alloy Rod Guide.• Urethane-based Rod Seal.• Buna N“U’’ Cup Piston Seal.• Pressure Rating –250 PSI Maximum (Air only)• Available in Double Acting and Reverse Actingmodels.• Enclosed Spring Force: 15 lbs. Relaxed –30lbs.Compressed.• Standard Buna NSeals Temperature Rangeof -20ºF (-25ºC) to 200ºF (95ºC)□ Enter Stroke Length as 3rd DigitOPTIONSNO CHARGE:• MAGNALUBE ® G(G)• PORTS ROTATED (K)• SIDE PORTED REAR HEAD (Q)REVERSE ACTING BUMPERS (B)• $4.05 additional• Add .062 to overall lengthDOUBLE ACTING BUMPERS (B)• $6.85 additional• Add .125 to overall lengthMOLYCOATED BODY (F)• Add $2.80 per inch of strokeEXTRA EXTENSION (EE)• Add $1.70 per inch of extensionMAGNET (prefix M) –Add $17.65• Reverse acting add .125" to overall length• Must specify track(s) for use with miniatureposition sensing (T2, T3, T4) –add $2.90 per track.See page 1.9 for track location details. See PositionSensing Solutions, page 8.3 for switch selectioninformation.HIGH TEMPERATURE SEALS (V)Temperature Range :0°to400°F (-18° to 205°C)• Reverse acting, add $14.50• Double acting, add $19.35Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSNR-31□ -D$82.45BASE PRICEAdd $3.45 per inch of strokeDouble Acting –Air ReturnFront Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke 12’’Optional Accessories:D-615 Mounting BracketD-508 Mounting NutBase Weight: 1.40Adder Per Inch of Stroke: .15PCCylindersAll StainlessNon-RepairableAll StainlessRepairableNR-31□ -DXP$98.85BASE PRICEAdd $3.45 per inch of strokeDouble Acting –UniversalMounting Type –Pivot or DoubleEnd –Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5",6", 7", 8", 9", 10", 11", 12"Maximum Stroke 24"Optional Accessories:D-615 Mounting BracketD-231-3 Rod ClevisD-620 Pivot BracketD-508 Mounting NutBase Weight: 1.62Adder Per Inch of Stoke: .15ZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.95ForTechnical Assistance: 800-442-4622

2" Bore Non-Rotating Air CylindersNR-31□ -R$99.00BASE PRICEAdd $6.35 per inch of stroke2" BoreNon-Rotating Air Cylinders (continued)MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSReverse Single Acting –PullType –Rod Normally Extended –Spring Return –Front NoseMountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke 4"Optional Accessories:D-129 Mounting BracketD-508 Mounting NutBase Weight: 1.24Adder Per Inch of Stroke: .43NR-31□ -RP$108.40BASE PRICEAdd $6.35 per inch of strokeReverse Single Acting –Pivot orPull Type –Rod Normally ExtendedSpring Return –Rear PivotMountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke 4"Optional Accessories:D-231-3 Piston Rod ClevisD-620 Pivot BracketD-508 Mounting NutD-615 Mounting BracketBase Weight: 1.46Adder Per Inch of Stroke: .43All prices are F.O.B. Monee, Illinois and are subject to change without notice1.96

2-1/2" Bore Non-Rotating Air Cylinders• New! Stainless Steel Piston Rod Standard.• Unique Square Piston Rod with RoundedCorners.• High Strength Aluminum Alloy Rod Guide.• Urethane-based Rod Seal.• Buna N“U’’ Cup Piston Seal.• Pressure Rating –250 PSI Maximum (Air only)• Available in Double Acting.• Standard Buna NSeals Temperature Rangeof -20ºF (-25ºC) to 200º F(95ºC)□ Enter Stroke Length as 3rd DigitNR-50□ -D$118.35BASE PRICEAdd $3.80 per inch of strokeNR-50□ -DXP$131.75BASE PRICEAdd $3.80 per inch of strokeOPTIONSNO CHARGE:• MAGNALUBE ® G(G)• PORTS ROTATED (K)• SIDE PORTED REAR HEAD (Q)DOUBLE ACTING BUMPERS (B)• $6.85 additional• Add .125 to overall lengthMOLYCOATED BODY (F)• Add $2.80 per inch of strokeEXTRA EXTENSION (EE)• Add $1.95 per inch of extensionMAGNET (prefix M) –Add $17.65• Must specify track(s) for use with miniatureposition sensing (T2, T3, T4) –add $2.90 per track.See page 1.9 for track location details. SeePosition Sensing Solutions, page 8.3 for switchselection information.HIGH TEMPERATURE SEALS (V)Temperature Range :0°to400°F (-18° to 205°C)• Double acting, add $19.35MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSDouble Acting –Air ReturnFront Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6"Maximum Stroke 12"Optional Accessories:D-615-1 Mounting BracketD-2540 Mounting NutBase Weight: 1.98Adder Per Inch of Stroke: .17Double Acting –UniversalMounting Type –Pivot or DoubleEnd – Air ReturnStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4", 5", 6",7", 8", 9", 10", 11", 12"Maximum Stroke 24"Optional Accessories:D-615-1 Mounting BracketD-231-3 Rod ClevisD-620 Pivot BracketD-2540 Mounting NutBase Weight: 2.27Adder Per Inch of Stroke: .17Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders•Accessories –• For 9/16'' bore, see page 1.20.• For 3/4'' bore, see page 1.28.• For 1-1/16'' bore, see page 1.40.• For 1-1/2'' bore, see page 1.53.• For 2'' bore, see page 1.60.• For 2-1/2'' bore, see page 1.62.500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.97ForTechnical Assistance: 800-442-4622

PC CylindersThe Bimba PC Cylinder has astainlesssteel body, stainless steel rod andacetal resin end caps. It is ideal forapplications and environments thatrequire exposure to moisture,lubricants and specific solvents.The model number of all PC Cylinders consists of threealphanumeric clusters. These designate product type,bore size and stroke length, and options. Please referHowtoOrderPC –096–DXP Wto the charts below for an example of model numberPC-096-DXPW. This is an 1-1/16" bore, 6" stroke PCcylinder with auniversal mount and rod wiper.DelrinEnd CapCylinderBore Size02 9/16"04 3/4"09 1-1/16"17 1-1/2"31 2"Standard StrokeLengthsAll models: 1/2", 1", 1-1/2",2", 2-1/2", 3", 4", 5", 6"DXP &DXDE models:7", 8", 9", 10", 11", 12"Consult your local distributorfor price and availablity ofnonstandard strokesDDXPDXDEMountingNoseMountUniversalMountDoubleEnded RodBCC1C2EOptionsBumpersAir Cushions,both endsAir Cushion,front end onlyAir Cushion,rear head onlyNon-LubeServiceEEX.XXExtra Extension9/16" = 0.23/4" = 0.41-1/16" = 0.91-1/2" = 1.72" = 3.1Approximate Power FactorsFor example, aPC-096-DXPW will exertaforce of 0.9 times the air line pressure;aPC-173-D will exert aforce of 1.7times the air pressure, etc.1.98FGKMNTQTVWMolycoatedBodyMagnalube ® GPivot 90°(DXP model only)Magnetic PistonNo ThreadSide PortedRear HeadSwitch Track(T2,T3 or T4, see page 1.9for track location details.See Position SensingSolutions, page 8.3 for switchselection information.)FluoroelastomerSeals (forcompatibilityonly)Rod Wiper (notavailable for9/16" bore)

PC CylindersBore9/16" (02)3/4" (04)1-1/16" (09)1-1/2" (17)2" (31)BoreMountingD$30.9032.8034.5044.1069.20DXP$32.9535.2537.3548.3574.80MountingDXDEStrokeAdder*$1.651.651.652.552.80BBumpersStrokeAdder*$4.204.204.205.056.45CN/A$15.8017.3020.2032.80BBumpers9/16" (02) $43.15 $2.15 $4.203/4" (04) 48.30 2.15 4.201-1/16" (09) 50.95 2.15 4.201-1/2" (17) 66.65 4.00 5.052" (31) 96.95 4.15 6.45List PricesOptionsEEExtraExtensionper inchKPivot 90°(DXPonly)*Nonstandard fractional strokes are priced to the next full inch increment.**Price adder includes the cushion and the floroelastomer seals.No charge Option -G,NT, QNOTE: See Original Line portion of the catalog for option Epricing.Stainless Steel Accessory PricesBoreC1 orC2N/A$8.008.7010.0016.00CN/A$15.8017.3020.2032.80Cwith VD&DXPN/A$33.4037.6041.8064.40CwithV**N/A$37.1041.0047.9070.10C1V orC2V**D&DXPN/A$26.0029.0032.0048.00C1VRod End ClevisN/A$29.0032.0038.0054.00$.90.90.901.301.45OptionsEEExtraExtensionper inch$1.101.101.102.002.10FMolycoatedBodyper inch$2.702.702.702.702.70FMolycoatedBodyper inch$2.702.702.702.702.70N/CMMagneticPiston$9.609.6011.9014.3016.70MMagneticPiston$9.609.6011.9014.3016.70Mounting NutModel Price Model Price9/16" (02) D-850-SS $20.70 D-154-SS $1.353/4" (04) D-54565-SS 22.80 D-9-SS 2.001-1/16" (09) D-54564-SS 25.85 D-9-SS 2.001-1/2" (17) D-54562-SS 31.75 D-1331-SS 3.252" (31) D-54563-SS 37.55 D-508-SS 6.85TSwitchTrack(T2,T3,T4)$2.90perTrackTSwitchTrack(T2,T3,T4)$2.90perTrackVFluoroelastomerSeals$10.8510.8512.9514.3018.35VFluoroelastomerSeals$14.3014.3016.5018.3524.25WRodWiperN/A$2.902.902.902.90WRodWiperN/A$5.755.755.755.75Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylindersBoreFoot BracketPivot BracketModel Price Model Price9/16" (02) D-770-SS $5.85 D-55202-SS $14.553/4" (04) D-129-SS 6.40 D-55203-SS 17.701-1/16" (09) D-129-SS 6.40 D-55203-SS 17.701-1/2" (17) D-61288-SS 13.20 D-55204-SS 22.002" (31) D-615-SS 28.30 D-55205-SS 27.40500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.99ForTechnical Assistance: 800-442-4622

PC CylindersDimensionsDMounting StyleDIBCEA+STROKEF(2)GHØJKN M L A+STROKEODXP Mounting StyleDIB CE F(2)EPQRHKØJONL(BOTH ENDS)M(BOTH ENDS)SDXDE MountingDIBC EA+(2xSTROKE)F(2)E CBIDHØJN(BOTH ENDS)O(BOTH ENDS)L(BOTH ENDS)M(BOTH ENDS)1.100

PC CylindersDimensionsDMounting StyleBore A A (cushion or B C D E F G H H I J K L M N OQoption)(cushion option)9/16" (02) 2.28 -- 0.38 0.38 0.50 0.06 #10-32 0.19 0.61 -- -- 0.19 0.50 .434/.437 7/16-20 -- #10-323/4" (04) 2.97 3.44 0.50 0.47 0.50 0.09 1/8 NPT 0.19 0.81 0.96 -- 0.25 0.63 .621/.624 5/8-18 -- 1/4-281-1/16" (09) 3.25 3.50 0.50 0.56 0.50 0.09 1/8 NPT 0.19 1.13 1.13 0.13 0.31 0.88 .621/.624 5/8-18 0.25 5/16-241-1/2" (17) 3.69 3.88 0.63 0.63 0.75 0.09 1/8 NPT 0.25 1.56 1.56 0.25 0.44 0.88 .996/.999 1-14 0.38 7/16-202" (31) 4.69 5.27 0.81 0.72 0.88 0.13 1/4 NPT 0.31 2.08 2.08 0.38 0.63 1.25 1.372/1.375 1-1/4-12 0.50 1/2-20Magnetic Piston Length Adder: 0.125" for 1-1/16" and 1-1/2", all other sizes 0.250"DXP Mounting StyleBore A B C D E F H H(cushion option)I J9/16" (02) 2.56 0.38 0.38 0.50 0.06 #10-32 0.61 -- -- 0.193/4" (04) 3.75 0.50 0.47 0.50 0.09 1/8 NPT 0.86 0.96 -- 0.251-1/16" (09) 3.84 0.50 0.56 0.50 0.09 1/8 NPT 1.13 1.13 0.13 0.311-1/2" (17) 4.38 0.63 0.63 0.75 0.09 1/8 NPT 1.56 1.56 0.25 0.442" (31) 5.63 0.81 0.73 0.88 0.13 1/4 NPT 2.08 2.08 0.38 0.63Bore K L M N O P Q R S9/16" (02) 0.31 .434/.437 7/16-20 -- #10-32 0.38 0.25 0.19 0.163/4" (04) 0.38 .621/.624 5/8-18 -- 1/4-28 0.63 0.34 0.28 0.251-1/16" (09) 0.38 .621/.624 5/8-18 0.25 5/16-24 0.63 0.34 0.28 0.251-1/2" (17) 0.63 .996/.999 1-14 0.38 7/16-20 0.81 0.50 0.38 0.382" (31) 0.74 1.372/1.375 1-1/4-12 0.50 1/2-20 1.03 0.56 0.44 0.38Magnetic Piston Length Adder: 0.125" for 1-1/16" and 1-1/2", allother sizes 0.250"Bore A B C D E F H H I J L M N O9/16" (02) 2.94 0.38 0.38 0.50 0.06 #10-32 0.61 -- -- 0.19 .434/.437 7/16-20 -- #10-323/4" (04) 4.00 0.50 0.47 0.50 0.09 1/8 NPT 0.86 0.96 -- 0.25 .621/.624 5/8-18 -- 1/4-281-1/16" (09) 4.00 0.50 0.56 0.50 0.09 1/8 NPT 1.13 1.13 0.13 0.31 .621/.624 5/8-18 0.25 5/16-241-1/2" (17) 5.13 0.63 0.63 0.75 0.09 1/8 NPT 1.56 1.56 0.25 0.44 .996/.999 1-14 0.38 7/16-202" (31) 6.56 0.81 0.73 0.88 0.13 1/4 NPT 2.08 2.08 0.38 0.63 1.372/1.375 1-1/4-12 0.50 1/2-20Magnetic Piston Length Adder: 0.250"DXDE Mounting(cushion option)Bumper Length Adder9/16" (02) 3/4" (04) 1-1/16" (09) 1-1/2" (17) 2" (31)0.125 0 0.125* 0.125 0.250*For DXDE model, add 0.500"Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylinders1.101ForTechnical Assistance: 800-442-4622

PC CylindersDimensionsStainless Steel Mounting Nut*ABBore Model A B C9/16" (02) D-154-SS 0.69 0.25 7/16-203/4" (04) D-9-SS 0.94 0.38 5/8-181-1/16" (09) D-9-SS 0.94 0.38 5/8-181-1/2" (17) D-1331-SS 1.50 0.55 1-142" (31) D-508-SS 1.88 0.50 1-1/4-12CStainless Steel Rod End Clevis(includes nut)*See page 1.103 for torque specificationsStainless Steel Foot BracketBACDBEFCEFG H IDIJØPINGAStainless Steel Rod End Clevis (includes nut)Bore Model A B C D E F G H I J9/16" (02) D-850-SS #10-32 0.38 0.75 0.94 0.13 0.56 0.19 0.38 0.56 0.193/4" (04) D-54565-SS 1/4-28 0.50 0.94 1.19 0.16 0.69 0.25 0.50 0.69 0.251-1/16" (09) D-54564-SS 5/16-24 0.50 0.94 1.19 0.19 0.69 0.25 0.50 0.69 0.251-1/2" (17) D-54562-SS 7/16-20 0.75 1.31 1.69 0.25 0.94 0.38 0.75 1.03 0.382" (31) D-54563-SS 1/2-20 0.75 1.31 1.69 0.31 0.94 0.38 0.75 1.03 0.38Stainless Steel Foot BracketBore Model A B C D E F G H I9/16" (02) D-770-SS 0.84 1.38 0.69 0.44 0.19 0.38 0.56 0.09 0.383/4" (04) D-129-SS 1.38 1.88 1.00 0.63 0.27 0.56 0.81 0.12 0.561-1/16" (09) D-129-SS 1.38 1.88 1.00 0.63 0.27 0.56 0.81 0.12 0.561-1/2" (17) D-61288-SS 1.75 2.50 1.50 1.03 0.28 0.75 1.00 0.12 0.752" (31) D-615-SS 2.50 3.13 1.63 1.38 0.34 1.00 1.50 0.25 1.00H1.102

PC CylindersDimensionsStainless Steel Pivot BracketA ØBCDStandard AirCylindersThree-PositionCylindersØG(2)HJIFEBore Model A B C D E F G H I J K9/16" (02) D-55202-SS 0.20 0.16 0.31 0.06 0.76 0.56 0.20 0.50 0.13 0.75 0.443/4" (04) D-55203-SS 0.31 0.25 0.38 0.12 1.19 0.88 0.22 0.75 0.19 1.13 0.631-1/16" (09) D-55203-SS 0.31 0.25 0.38 0.12 1.19 0.88 0.22 0.75 0.19 1.13 0.631-1/2" (17) D-55204-SS 0.38 0.38 0.63 0.13 1.75 1.38 0.28 1.00 0.25 1.50 0.912" (31) D-55205-SS 0.38 0.38 0.75 0.25 1.75 1.38 0.28 1.00 0.25 1.50 1.25KCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersSpecificationsPressure Rating: 100 psi (Air)Temperature Range: 32°F to 160°F (0°C to 72°C)Delrin End Caps304 Stainless Steel Body303 Stainless Steel RodAnodized Aluminum Alloy PistonOptions: Buna NBumpersPolyurethane WiperFluoroelastomer Seals (for compatibility only,not high temperature)All StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersCYLINDER WEIGHT (lbs.)BoreBase Weight Adder per 1"D DXP DXDE D&DXP DXDE9/16" (02) 0.05 0.06 0.07 0.02 0.033/4" (04) 0.13 0.15 0.18 0.03 0.051-1/16" (09) 0.21 0.25 0.3 0.05 0.071-1/2" (17) 0.46 0.48 0.6 0.08 0.132" (31) 1.08 1.17 1.48 0.15 0.24Bore SizeMOUNTING NUTTorque SpecificationsThreadSizeMax Torque(in- lbs.)9/16" (02) 7/16-20 4.03/4" (04)1-1/16" (09)5/8-18 12.01-1/2" (17) 1-14 30.02" (31) 11/4-12 45.0Rod LockCylinders500 HydraulicCylindersHole PunchCylinders1.103ForTechnical Assistance: 800-442-4622

All Stainless Steel Non-Repairable Original Line Cylinders ComponentDescription OperatingSpecifications 1.104

All Stainless Steel Non-Repairable Original Line CylindersStandard AirCylindersThree-PositionCylindersHowtoOrderCushionCylinders MRS®Cylinders Non-RotatingCylindersPCCylinders All StainlessNon-Repairable . All StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylinders1.105 ForTechnical Assistance: 800-442-4622

All Stainless Steel Non-Repairable Original Line Cylinders " All prices are F.O.B. Monee, Illinois and are subject to change without notice1.106

All Stainless Steel Non-Repairable Original Line Cylinders1-1/2" Bore $92.90 Standard AirCylindersThree-PositionCylindersCushionCylinders MRS®CylindersNon-RotatingCylindersPCCylinders 2" Bore All StainlessNon-RepairableAll StainlessRepairableZLine AirCylinders Rod LockCylinders500 HydraulicCylinders Hole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.107 ForTechnical Assistance: 800-442-4622

All Stainless Steel Non-Repairable Original Line Cylinders Dimensions (in) 1.108

All Stainless Steel Non-Repairable Original Line CylindersStainless Steel PivotBracket Standard AirCylindersThree-PositionCylinders CushionCylindersMRS®CylindersList Prices Stainless Steel Accessory Prices Non-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.109 ForTechnical Assistance: 800-442-4622

All Stainless Steel Non-Repairable Original Line Cylinders HowtoOrder/List Prices Dimensions All prices are F.O.B. Monee, Illinois and are subject to change without notice1.110

All Stainless Steel Non-Repairable Original Line CylindersElectrical Circuit Diagrams Standard AirCylinders Three-PositionCylinders CushionCylinders MRS®Cylinders Non-RotatingCylindersPCCylindersAll StainlessNon-Repairable All StainlessRepairableMounting Universal Switch Band ZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylinders1.111 ForTechnical Assistance: 800-442-4622

All Stainless Steel Repairable (Bell Ring Style) Original Line CylindersThe new all stainless repairable Original Linecylinders are ideal for food processing, chemical,medical, pharmaceutical, offshore or marineequipment, and energy production or wastemanagement applications.The bell ring design alsooffers the added benefit of full repairability withoutthe need for hand tools by securing the body to therod guide with aknurled, threaded nut.3/4" BoreMODEL/PRICE DESCRIPTION/ACCESSORIES DIMENSIONS (inch)D-4161-Astroke(12" max.Base Price: $165.65Add $1.65 per inch ofstroke)Double-Acting -Air Return -Front Nose MountingOptional Stainless Steel Accessories:D-129-SS Foot BracketD-9-SS Mounting NutD-54565-SS Rod ClevisD-4231-Astroke(24" max.Base Price: $207.15Add $1.65 per inch ofstroke)Double-Acting -Universal Mounting -Pivot, or Double End Mounting -AirReturnOptional Stainless Steel Accessories:D-129-SS Foot BracketD-55203-SS Pivot BracketD-9-SS Mounting NutD-54565-SS Rod Clevis1-1/16" BoreMODEL/PRICE DESCRIPTION/ACCESSORIES DIMENSIONS (inch)D-4173-Astroke(12" max.Base Price: $171.60Add $1.65 per inch ofstroke)Double-Acting -Air Return -Front Nose MountingOptional Stainless Steel Accessories:D-241-SS Foot BracketD-3556-SS Mounting NutD-54564-SS Rod ClevisD-4232-A-Base Price: $223.10Add $1.65 per inch ofstroke (24" max. stroke)Double-Acting -Universal Mounting -Pivot, or Double End Mounting -AirReturnOptional Stainless Steel Accessories:D-241-SS Foot BracketD-55203-SS Pivot BracketD-3556-SS Mounting NutD-54564-SS Rod ClevisEnter Stroke LengthAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.112

All StainlessSteelRepairable (BellRing Style) Original Line CylindersCylinder Assemblies and Component ListStandard AirCylindersThree-PositionCylinders3/4" Bore 1-1/16" BoreITEM PART NO. DESCRIPTION LIST ITEM PART NO. DESCRIPTION LISTA D-4485-A ROD GUIDE ASSEMBLY(IncludesRod Guide and D-4530 Kit)51.10B D-4530-A ROD SEAL KIT (Includes Seals, Bushing,Seal Retainer and Body Seal)22.45C D-4486-A- PISTON ROD ASSEMBLY(IncludesRod, Piston and D-4531 Kit)25.60 +1.65/in.D D-4531 PISTON SEAL KIT (IncludesPistonSeals and Piston Guide Ring)5.95E D-3961-SS BELL RING14.15F D-4487-A- REAR HEAD AND BODY ASSEMBLY 30.00 +1.65/in.(Nose Mount)G D-4488-A- REAR HEAD AND BODY ASSEMBLY(Universal Mount)37.40 +1.65/in.SOLID STAINLESS ACCESSORIES (in.)3/4" BoreA D-4489-A ROD GUIDE ASSEMBLY(IncludesRod Guide and D-4533 Kit)B D-4533-A ROD SEAL KIT (Includes Seals, Bushing,Seal Retainer and Body Seal)C D-4490-A- PISTON ROD ASSEMBLY(IncludesRod, Piston and D-4534 Kit)D D-4534-A PISTON SEAL KIT (IncludesPistonSeals and Piston Guide Ring)E D-1778-SS BELL RINGF D-4491-A- REAR HEAD AND BODY ASSEMBLY(Nose Mount)G D-4492-A- REAR HEAD AND BODY ASSEMBLY(Universal Mount)92.6523.6033.35 +1.65/in.7.8515.6532.85 +1.65/in.71.50 +1.65/in.CushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableD-129-SSFoot Bracket$6.40D-54565-SSD-55203-SSD-9-SSRod ClevisPivot BracketMounting Nut$22.80 $17.70 $2.001-1/16" BoreAll StainlessRepairableZLine AirCylindersRod LockCylindersD-241-SSFoot Bracket$20.35D-54564-SSRodClevis$25.85• 304 Stainless steel body• Low friction Buna N"U" Cup seals and rod wiper• 303 Stainless steel endcaps, piston rod, and bell ring nutD-55203-SSPivot Bracket$17.70Engineering SpecificationsD-3556-SSMounting Nut$2.60• Pressure Rating: 250 psi (air)• Composite FDA approved rod bearing and FDA approvedlubricant500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.113ForTechnical Assistance: 800-442-4622

ZLine Air Cylindersfor extremely tough applicationsHEX-STUD ® rod end heattreated alloy steel easilyremoved in case of failurePiston rod groundand polished type303 stainless steelCUSHION-QUIETelastomer bumpers forsmooth, quiet operationSintered bronzepivot bushingBuna N“U” cuppiston rod wiperseal (1 1 ⁄16" -1 1 ⁄2 "-2"models only)Sintered bronze rodbushingType 304 stainlesssteel bodyBuna N“U” cuppiston sealsPiston rod —piloted,threaded and rivetedinto pistonThe Z-Line air cylinder has the rolled-in construction ofthe Original Line but features the following:• Larger diameter, two-piece 303 stainless steel pistonrod• HEX-STUD rod end thread of heat treated alloy steel –easily removed in case of failure due to overload• CUSHION QUIET elastomer bumpers□ Enter Stroke Length as 3rd DigitOPTIONS:NO CHARGE:• MAGNALUBE G(G)EXTRA EXTENSION (EE), PER INCH OF EXTENSION:• 3 ⁄4 "Bore, add $1.00• 1 1 ⁄16" Bore, add $1.20• 1 1 ⁄2 "Bore, add $1.45• 2" Bore, add $1.60MOLYCOATED BODY (F)• Add $2.80 per inch of strokeMAGNET (prefix M)• 3 ⁄4 "Bore, add $10.05• 1 1 ⁄16" Bore, add $12.45• 1 1 ⁄2 "Bore, add $15.00• 2" Bore, add $17.50• Must specify track(s) for use with miniatureposition sensing (T2, T3, T4) –add $2.90 per track.See page 1.9 for track location details. See PositionSensing Solutions, page 8.3 for switch selectioninformation.MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS04□ -DBZ$44.00BASE PRICEAdd $1.80 per inch of stroke3/4" BoreZLine Air CylindersPush Force =.441 xpsi • Pull Force =.365 xpsiBlock Mount –Double Acting –Twobolt holes are provided forpositive mounting to abase.Standard Stroke Lengths:1", 2", 3", 4", 5", 6"Maximum Stroke –12"Base Weight: .30Adder Per Inch of Stroke: .04All prices are F.O.B. Monee, Illinois and are subject to change without notice1.114

ZLine Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS04□ -DUZ$37.90BASE PRICEAdd $1.80 per inch of stroke04□ -DZ$34.00BASE PRICEAdd $1.80 per inch of strokeMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS09□ -DBZ$58.50BASE PRICEAdd $2.40 per inch of stroke09□ -DUZ$44.95BASE PRICEAdd $2.40 per inch of stroke3/4" BoreZLine Air Cylinders (continued)Push Force =.441 xpsi • Pull Force =.365 xpsiUniversal Mount –Double Acting –For double end mounting useD-8315 mounting bracket.For rear pivot mounting useD-8321-A pivot bracket. UseD-10139-A rod clevis.Standard Stroke Lengths:1", 2", 3", 4", 5", 6", 7", 8", 9", 10",11", 12"Maximum Stroke –32"Base Weight: .30Adder Per Inch of Stroke: .04Nose Mount –Double Acting –Use D-8315 mounting bracket.Standard Stroke Lengths:1", 2", 3", 4", 5", 6"Maximum Stroke –12"Base Weight: .27Adder Per Inch of Stroke: .041-1/16" BoreZLine Air CylindersPush Force =.886 xpsi • Pull Force =.776 xpsiBlock Mount –Double Acting –Four bolt holes are provided forpositive mounting to abase.Standard Stroke Lengths:1", 2", 3", 4", 5", 6"Maximum Stroke –12"Base Weight: .55Adder Per Inch of Stroke: .06Universal Mount –Double Acting –For double end mounting useD-8316 mounting bracket.For rear pivot mounting useD-8322-A pivot bracket. UseD-8309-A rod clevis.Standard Stroke Lengths:1", 2", 3", 4", 5", 6", 7", 8", 9", 10",11", 12"Maximum Stroke –32"Base Weight: .45Adder Per Inch of Stroke: .06Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.115ForTechnical Assistance: 800-442-4622

ZLine Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS09□ -DZ$39.85BASE PRICEAdd $2.40 per inch of stroke1-1/16" BoreZLine Air Cylinders (continued)Push Force =.886 xpsi • Pull Force =.776 xpsiNose Mount –Double Acting –Use D-8316 mounting bracket.Standard Stroke Lengths:1", 2", 3", 4", 5", 6"Maximum Stroke –12"Base Weight: .38Adder Per Inch of Stroke: .06MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS17□ -DBZ$80.90BASE PRICEAdd $2.80 per inch of stroke1-1/2" BoreZLine Air CylindersPush Force =1.77xpsi • Pull Force =1.57xpsiBlock Mount –Double Acting –Four bolt holes are provided forpositive mounting to abase.Standard Stroke Lengths:1", 2", 3", 4", 5", 6"Maximum Stroke –12"Base Weight: 1.00Adder Per Inch of Stroke: .1017□ -DUZ$68.40BASE PRICEAdd $2.80 per inch of stroke17□ -DZ$62.55BASE PRICEAdd $2.80 per inch of strokeUniversal Mount –DoubleActing –For double end mountinguse D-8318 mounting bracket.For rear pivot mounting useD-8324-A pivot bracket. UseD-8311-A rod clevis.Standard Stroke Lengths:1", 2", 3", 4", 5", 6", 7", 8", 9", 10",11", 12"Maximum Stroke –32"Base Weight: .92Adder Per Inch of Stroke: .10Nose Mount –Double Acting –Use D-8318 mounting bracket.Standard Stroke Lengths:1", 2", 3", 4", 5", 6"Maximum Stroke –12"Base Weight: .78Adder Per Inch of Stroke: .10All prices are F.O.B. Monee, Illinois and are subject to change without notice1.116

ZLine Air CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS31□ -DBZ$106.55BASE PRICEAdd $3.10 per inch of stroke2" BoreZLine Air CylindersPush Force =3.14xpsi • Pull Force =2.83xpsiBlock Mount –Double Acting –Four bolt holes are provided forpositive mounting to abase.Standard Stroke Lengths:1", 2", 3", 4", 5", 6"Maximum Stroke –12"Base Weight: 2.03Adder Per Inch of Stroke: .15Standard AirCylindersThree-PositionCylindersCushionCylinders31□ -DUZ$89.50BASE PRICEAdd $3.10 per inch of stroke31□ -DZ$82.05BASE PRICEAdd $3.10 per inch of strokeD-8315$3.35Universal Mount –Double Acting –For double end mounting useD-8319 mounting bracket.For rear pivot mounting useD-8325-A pivot bracket. UseD-8313-A rod clevis.Standard Stroke Lengths:1", 2", 3", 4", 5", 6", 7", 8", 9", 10",11", 12"Maximum Stroke –32"Base Weight: 2.15Adder Per Inch of Stroke: .15Nose Mount –Double Acting –Use D-8319 mounting bracket.Standard Stroke Lengths:1", 2", 3", 4", 5", 6"Maximum Stroke –12"Base Weight: 1.91Adder Per Inch of Stroke: .15ZLine Accessories3/4" BoreAccessoriesD-10139-A$6.55D-8321-A$5.00MRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersMounting BracketRod ClevisPivot BracketHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.117ForTechnical Assistance: 800-442-4622

ZLine Accessories continuedD-3556$.803/4" BoreAccessories (continued)Mounting NutD-8316$4.501-1/16"BoreAccessoriesD-8309-A$6.65D-8322-A$7.05Mounting BracketD-2545$1.20Rod ClevisPivot BracketMounting NutD-8318$6.851-1/2" BoreAccessoriesD-8311-A$7.75D-8324-A$10.70Mounting BracketRod ClevisPivot BracketAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.118

ZLine Accessories continuedD-8484$4.851-1/2" BoreAccessories (continued)Standard AirCylindersThree-PositionCylindersMounting NutCushionCylindersD-8319$7.552" BoreAccessoriesD-8313-A$11.05D-8325-A$12.45MRS®CylindersNon-RotatingCylindersPCCylindersMounting BracketD-508$4.85Rod ClevisPivot BracketAll StainlessNon-RepairableAll StainlessRepairableMounting NutZLine AirCylinders3⁄4 "BORED-9868$3.851 1 ⁄16" BORED-6583$4.30Hex-Stud1 1 ⁄2 "BORED-6636$6.652" BORED-6637$8.20Rod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.119ForTechnical Assistance: 800-442-4622

Rod Lock CylindersThe Bimba Original Line Rod Lock Cylinderis anormally clamped unit that holds thepiston rod in position when air pressure isnot present. It is ideal for preventing drift atmachine shut down.How toOrderThe model number for all Original Line Rod Lock cylindersconsists of three alphanumeric clusters. These designateproduct type, bore size and stroke length, and options.Please note the following features are standard, andare included in all model numbers: BFLM (BlockFront with Magnet) and W(Rod Wiper).Product TypeBFLM -Orig inal Line Rod Lock(Block Front and Mag netStandard)Bore Size04 -3/4"09 - 1-1/16"17 -1-1/2"31 - 2"50 -2-1/2"70 - 3"Standard Stroke LengthsRefer bybore size toOLdouble-actin gstandard stroke len g thsBFLM -093 -DWDDXPMounting Style-Axial Rear PortUniversal Mount-(Includes pivot bushing )OptionsB - Double Acting BumpersF - Molycoated Body IDN - Low Temperature Operation (-40°F to +200°F)Q - Side Port Rear HeadT2, T3, T4 - Add Track for MS Series SwitchV - High Temperature Operation (0°F to +400°F)W - Rod Wiper (standard)EE - Extra Rod Extension1.120

Rod Lock CylindersList PricesMounting Style Bumpers MolycoatAdd perBore D DXP1" StrokeFT2, T3, T4EEBNV(per inch) (per track) (per inch)3/4" (04) $105.05 $110.00 $2.10 $4.60 $2.95 $2.30 $3.15 $15.00 $1.151-1/16" (09) 132.80 137.75 2.30 4.60 2.95 2.55 3.15 17.80 1.151-1/2" (17) 171.25 177.50 3.25 5.55 2.95 4.15 3.15 19.70 2.002" (31) 243.10 249.90 3.80 7.70 3.15 5.50 3.40 27.30 2.552-1/2" (50) 303.35 319.55 4.20 7.70 3.15 7.20 3.40 27.30 2.853" (70) 395.05 411.30 4.20 10.00 3.15 9.55 3.40 28.80 2.85DimensionsDMounting StyleLowTempSwitchTrackHighTempExtraExtensionStandard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableDXP Mounting StyleZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.121ForTechnical Assistance: 800-442-4622

Rod Lock CylindersDimensions (in.)Dimensions (in.)DModelBore A B C D E F G H J K L3/4" (04) 4.48 0.72 0.37 0.75 0.31 1/4-28 UNF-2A 0.25 0.25 2.48 1.83 #10-32 UNF-2B1-1/16" (09) 4.84 0.61 0.31 0.59 0.75 0.38 5/16-24 UNF-2A 0.31 0.38 2.6 1.95 #10-32 UNF-2B1-1/2" (17) 5.47 0.82 0.32 1.25 0.5 7/16-20 UNF-2A 0.43 0.38 3.37 2.75 1/8 NPT2" (31) 6.84 0.88 0.44 1.25 0.62 1/2-20 UNF-2A 0.56 0.38 3.97 3.13 1/8 NPT2-1/2" (50) 7.48 0.87 0.43 1.25 0.75 1/2-20 UNF-2A 0.62 0.38 4.61 3.62 1/4 NPT3" (70) 8.22 0.92 0.46 1.25 0.75 5/8-16 18 UNF-2A 0.62 0.38 5.15 4.17 1/4 NPTBore M N O P Q R S T U3/4" (04) #10 0.25 2.32 1.12 0.16 0.81 1/8 NPT 0.80 0.621-1/16" (09) #10 0.25 2.78 1.38 0.16 1.06 1/8 NPT 1.12 0.871-1/2" (17) 1/4 0.32 3.38 1.75 0.25 1.25 1/4 NPT 1.56 0.882" (31) 3/8 0.39 4.45 2.25 0.31 1.62 1/4 NPT 2.08 1.242-1/2" (50) 7/16 0.42 5.67 2.75 0.44 1.88 1/4 NPT 2.58 1.743" (70) 1/2 0.42 6.28 3.25 0.5 2.25 3/8 NPT 3.13 1.99DXP ModelBore A U V W X Y Z AA BB3/4" (04) 5.26 0.28 0.62 0.35 0.09 0.62 5/8-18 UNF-2A 0.25 0.371-1/16" (09) 5.44 0.28 0.62 0.34 0.09 0.62 5/8-18 UNF-2A 0.25 0.371-1/2" (17) 6.68 0.47 0.97 0.56 0.09 1.00 1-14 UNF-2A 0.38 0.682" (31) 7.78 0.44 1.03 0.56 0.13 1.37 1-1/4-12 UNF-2A 0.38 0.722-1/2" (50) 8.42 0.44 1.03 0.56 0.12 1.50 1-3/8-12 UNF-2A 0.38 0.723" (70) 9.47 0.63 1.34 0.81 0.19 1.62 1-1/2-12 UNF-2A 0.50 0.85OptionsDimensional Deviations from StandardDimensionalOptionDeviationUse DXP model,Q - Side Port Rear Headomit rear pivot tan gB - Bumpers 04 - no adderAdd toOverall Len g th byBore Size:09 - .13"17 - .13"31 - .25"50 - .25"70 - .25"1.122

Rod Lock CylindersHow ItWorks• Dowel pins ride in the cam groove.• When air pressure is present, piston actuates and dowel pins follow cam toopen position, allowing pistonrod to travelfreelythrough clamp.• In absense of pressure, the spring actuates piston and dowels follow toclosed position, activating the rod clamp.UNCLAMPEDCLAMPEDStandard AirCylindersThree-PositionCylindersPORT: 50 PSI MIN ACTIVATESPISTON TO RELEASECLAMPROD LOCK PISTONPISTON CAPPISTONCushionCylindersPISTON SEALCAMDOWEL PINSPRINGFLAT WASHERCAMMRS®CylindersROD GUIDEROD CLAMPBUTTONHEAD CAP SCREWSEALRETAINERDOWEL PINSNon-RotatingCylindersROD CLAMPPCCylindersROD WIPERROD BUSHINGROD SEALEngineering SpecificationsOperating Medium:Operating Pressure:Temperature Range:Lubrication:Cylinder body:Rod Guide, Rear Head:Cap:Piston &Rod Seal:Rod &Pivot Bushing:Piston Rod:Expected Service Life:Air50 psi minimum (to actuate lock piston)125 psi maximum-20 to +200 degrees FHT-99304 stainless steelAluminumAnodized aluminumBuna-NSintered bronzeHard chrome plated stainless steel5million cylinder actuations1million lock actuationsAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylindersRod Lock Holding ForcesBoreHolding Force(Pounds)3/4" (04) 401-1/16" (09) 901-1/2 " (17) 1702" (31) 3102-1/2" (50) 5003" (70) 700OperatingGuidelines/Product Precautions• The Rod Lock is not asafety device.• Do not use for intermediate stopping; the cylinder isdesigned to prevent drift from astationary position.• Load weight must not exceed the stated holdingforce for the cylinder.500 HydraulicCylindersHole PunchCylinders1.123ForTechnical Assistance: 800-442-4622

Hydraulic CylindersHEX-STUD ® madefrom heat treatedalloy steel. In caseof failure due tooverload, thehexagon portionwill remain in rodand can be easilyremovedSintered bronzepiston rod guidebushing“O” ringTIE-BANDS reinforceboth ends of type 304stainless steel bodyrolled in agroove onthe periphery of eachend cap doublingjoint strength“O” ringLeatherBack-upringsSintered bronzepivot bushingHigh strengthaluminum alloyendcaps &pistonBuna Nrod wiperseal assures drydrip free pistonrodBlock Vsealwith backup washerPiston rod —hard chromeplatedFilled PTFEbearingPiston rod pilotedinto piston —threaded andrivetedBuna Nblock Vsealswith back up washersThe Bimba “500” is aprecision built, compact,lightweight hydraulic cylinder designed specifically forhydraulic use only, atpressures up to 500 psi.• Rated 500 PSI Hydraulic (non-shock), Double ActingOPTIONS:EXTRA EXTENSION (EE), PER INCH OF EXTENSION:• 1 1 ⁄16" Bore, add $1.10 per inch• 1 1 ⁄2 "Bore, add $1.45 per inch• 2" Bore, add $1.65 per inchPORTS ROTATED 90 DEGREES (K) (no charge)□ Enter Stroke Length as 3rd DigitOPTIONS continued…MAGNET (prefix M)Example: HM-096-DZ• 4" stroke or greater required• Overall length increases by 0.25"• 1 1 ⁄16" Bore, add $11.90• 1 1 ⁄ 2 "Bore, add $14.30• 2" Bore, add $16.70FLUOROELASTOMER SEALS (V)• Specify for compatibility• 1 1 ⁄16" Bore, add $22.75• 1 1 ⁄ 2 "Bore, add $28.40• 2" Bore, add $34.15All prices are F.O.B. Monee, Illinois and are subject to change without notice1.124

“500” Hydraulic CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSH-09□ -DBZ$61.45BASE PRICEAdd $2.15 per inch of strokeH-09□ -DUZ$55.00BASE PRICEAdd $2.15 per inch of strokeH-09□ -DZ$50.35BASE PRICEAdd $2.15 per inch of stroke1-1/16" Bore“500” Hydraulic CylindersPush Force =.886 xpsi • Pull Force =.776 xpsiFront Block MountStandard Stroke Lengths:1", 2", 3", 4", 5", 6"Maximum Stroke –12"Base Weight: .57Adder Per Inch of Stroke: .06Universal Mount –Double End orRear PivotStandard Stroke Lengths:1", 2", 3", 4", 5", 6", 7", 8", 9", 10",11", 12"Maximum Stroke –32"Optional Accessories:D-8316 Mounting BracketD-8322-A Pivot BracketD-8309-A ClevisBase Weight: .50Adder Per Inch of Stroke: .06Nose MountStandard Stroke Lengths:1", 2", 3", 4", 5", 6", 7"Maximum Stroke –12"Optional Accessory:D-8316 Mounting BracketBase Weight: .43Adder Per Inch of Stroke: .06MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSH-17□ -DBZ$89.00BASE PRICEAdd $2.80 per inch of stroke1-1/2" Bore“500” Hydraulic CylindersPush Force =1.77xpsi • Pull Force =1.57xpsiFront Block MountStandard Stroke Lengths:1", 2", 3", 4", 5", 6"Maximum Stroke –12"Base Weight: 1.00Adder Per Inch of Stroke: .10Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.125ForTechnical Assistance: 800-442-4622

“500” Hydraulic CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSH-17□ -DUZ$82.10BASE PRICEAdd $2.80 per inch of stroke1-1/2" Bore“500” Hydraulic Cylinders (continued)Push Force =1.77xpsi • Pull Force =1.57xpsiUniversal Mount –Double End orRear PivotStandard Stroke Lengths:1", 2", 3", 4", 5", 6", 7", 8", 9", 10",11", 12"Maximum Stroke –32"Optional Accessories:D-8318 Mounting BracketD-8324-A Pivot BracketD-8311-A ClevisBase Weight: .95Adder Per Inch of Stroke: .10H-17□ -DZ$76.85BASE PRICEAdd $2.80 per inch of strokeNose MountStandard Stroke Lengths:1", 2", 3", 4", 5", 6", 7", 8", 9", 10",11", 12"Maximum Stroke –12"Optional Accessory:D-8318 Mounting BracketBase Weight: .84Adder Per Inch of Stroke: .10MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSH-31□ -DBZ$116.20BASE PRICEAdd $3.15 per inch of stroke2" Bore“500” Hydraulic CylindersPush Force =3.14xpsi • Pull Force =2.83xpsiFront Block MountStandard Stroke Lengths:1", 2", 3", 4", 5", 6"Maximum Stroke –12"Base Weight: 1.90Adder Per Inch of Stroke: .24H-31□ -DUZ$108.75BASE PRICEAdd $3.15 per inch of strokeUniversal Mount –Double End orRear PivotStandard Stroke Lengths:1", 2", 3", 4", 5", 6", 7", 8", 9", 10",11", 12"Maximum Stroke –32"Optional Accessories:D-8319 Mounting BracketD-8325-A Pivot BracketD-8313-A ClevisBase Weight: 1.75Adder Per Inch of Stroke: .24All prices are F.O.B. Monee, Illinois and are subject to change without notice1.126

“500” Hydraulic CylindersMODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSH-31□ -DZ$101.60BASE PRICEAdd $3.15 per inch of stroke2" Bore“500” Hydraulic Cylinders (continued)Push Force =3.14xpsi • Pull Force =2.83xpsiNose MountStandard Stroke Lengths:1", 2", 3", 4", 5", 6"Maximum Stroke –12"Optional Accessory:D-8319 Mounting BracketBase Weight: 1.63Adder Per Inch of Stroke: .24“500” Hydraulic Cylinder AccessoriesStandard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersD-8316$4.501-1/16" BoreAccessoriesD-8309-A$6.65D-8322-A$7.05Non-RotatingCylindersPCCylindersAll StainlessNon-RepairableMounting BracketD-2545$1.20Rod ClevisPivot BracketAll StainlessRepairableZLine AirCylindersMounting NutRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.127ForTechnical Assistance: 800-442-4622

“500” Hydraulic Cylinder Accessories continuedD-8318$6.851-1/2" BoreAccessoriesD-8311-A$7.75D-8324-A$10.70Mounting BracketD-8484$4.85Rod ClevisPivot BracketMounting NutD-8319$7.552" BoreAccessoriesD-8313-A$11.05D-8325-A$12.45Mounting BracketD-508$4.85Rod ClevisPivot BracketMounting NutAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.128

“500” Hydraulic Cylinder Accessories continued1 1 ⁄16" BORED-6583$4.30Hex-Stud1 1 ⁄2 "BORED-6636$6.652" BORED-6637$8.20Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders500 HydraulicCylindersHole PunchCylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice1.129ForTechnical Assistance: 800-442-4622

Hole Punch CylindersDesigned to punch millions of holes in plastic or otherthin sheet materials 2to3mils thick, the long-lifeBIMBA Pneumatic Hole Puncher will give you morecycles per penny. The hardened steel cutter withground razor sharp edges is an integral part of thecylinder. Asmall air jet ejects the slugs from the cutterpreventing slug build up, and Elastomer Bumpersinsure Cushion Quiet operation. Less than 1" indiameter, several cylinders can be closely mounted.Available in seven hole cutter sizes from 1 ⁄4 "to 5 ⁄8 ".This stainless steel body, single acting spring returncylinder has a 3 ⁄4 "bore and 1" stroke. Anickel plated steelrod guide is threaded for easy nose mounting, and a 1 ⁄8 "NPT air inlet is conveniently located in the rear head.Prelubricated with HT-99, the cylinder can be operatedwith ordinary shop air at pressures up to 250 psi.MODEL NO. HOLE SIZE A B C D E F G H PRICED-11840-ABase Weight: .18D-9846-A*Base Weight: .19D-11811-ABase Weight: .20D-11618-ABase Weight: .21D-11998-ABase Weight: .23D-11999-ABase Weight: .24D-12107-ABase Weight: .29D-12108-ABase Weight: .291/4" .250" 1/2-20 .50 .44 3.44 .19 .62 .81 $34.80N/A N/A 1/2-20 .50 .44 3.44 .19 .62 .81 $33.105/16" .312" 1/2-20 1.00 .44 3.44 .19 .62 .81 $43.503/8" .375" 1/2-20 1.00 .44 3.44 .19 .62 .81 $43.507/16" .438" 5/8-18 1.00 .50 3.50 .19 .62 .81 $50.001/2" .500" 5/8-18 1.00 .50 3.50 .19 .62 .81 $50.009/16" .562" 3/4-16 1.00 .63 3.63 .19 .62 .99 $54.155/8" .625" 3/4-16 1.00 .63 3.63 .19 .62 .99 $54.15*The Pneumatic Hole Puncher Cylinder may be ordered without the cutter under model number D-9846-A. This cylinder has the samefeatures and dimensions as the Hole Puncher except 1 ⁄4 -28 UNF-2A by 0.50 long rod threads are provided so you may attach your owncutter.All prices are F.O.B. Monee, Illinois and are subject to change without notice1.130