Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>MicroBlo</strong>A solution with micro-tube et micro-cable
The Complete Solution<strong>MicroBlo</strong> is an integrated solution for the provision of air blownfibre infrastructures in the telecom outside plant arena.<strong>MicroBlo</strong> is a trademark of Brand-Rex and the system is beingjointly marketed by Brand-Rex and Tyco Electronics.The joint approach enables customers to purchase anintegrated system safe in the knowledge of systemcompatibility and performance.
Basic principle of modular cableSTEP 1:Install a network of micro-ductsdirect buried, in new / existingducts or aerial using push / pullconnectors and modular cableenclosuresSTEP 2:Blow or blow / push individualfibres, fibre bundles, ribbons ormicro-cables in the micro-ductswhen needed and terminate /splice where needed
Benefits of a“Micro Ducted Air Blown Fibre System”1. Increased flexibility for network growth and churn2. Reduced splicing and/or connector points3. Shorter time to service4. Minimizes the community disruption (one time dig )5. Divert network investment
<strong>MicroBlo</strong> Product Family
<strong>MicroBlo</strong> Product Range - DuctAll of the MultiDuct products are constructed around Brand-Rex MicroDucts available in 5.00mm and 10.00mm variantsA range of non standard product options have also beendesigned, these include a secondary nylon 12 jacketed rangeof MultiDucts offering termite resistance (TR) and a range ofarmoured products (SWA) where additional protection isrequired..
Cable de MicrotubeTwo options standard :(PE)-O Aluminium/Polyethelene moisture barrier, black LDPE sheath(PE)-O-(MWB) Aluminum/Polyethelene moisture barrier*,Fully waterblocked with Swellable tape and yarns, black LDPE sheath
<strong>MicroBlo</strong> acccessories for tube routingFOSC-500B-MC
<strong>MicroBlo</strong> Product Range - EquipmentThe installation of MicroCablesis carried out with the Brand-RexIM3000 blowing head availableuniquely to Brand-Rex licensed<strong>MicroBlo</strong> installers. The IM3000is capable of installing the<strong>MicroBlo</strong> MicroCables up to1,000m in two directions andcan achieve greater installationdistances by cascading multipleunits.The IM3000 comes with fittingsfor the standard MicroCablevariants.
<strong>MicroBlo</strong> Fiber and MicroCable<strong>MicroBlo</strong> MicroCable:2.65mm (0.1 inches) MicroCable2 fibrestigth buffered single fibres stranded with water blocking nonmetallic strength members, layer of tape, ripcord, PE sheath6.00mm (0.24 inches) MicroCable12, 24, 36, 48 fibresDistributed non metallic strength members,layers of stranded elements – 12 fibers per gel filled tube,gel filled interstices, layer of tape, ripcord, PE sheath
<strong>MicroBlo</strong> accessories for splicing/patchingThese are the standard TYCO ElectronicsFOSC and FIST enclosures with specificmodular cable termination accessories
<strong>MicroBlo</strong> push / pull connectorsEndcapsAvailable for 5, 8 and10mm MicroDuctsBlockingconnectorsStraightconnectorsAvailable for 5, 8 and10mm MicroDuctsBlocking sleeveDesigned to workat 10 BAR (145PSI)All connectors can bere-mated 10 timeswhile maintaining theperformance(not valid for the blockingfeature)Available for 8 and10mm MicroDucts anddown to 4mmMicroCablesAvailable for 5mmMicroDuct and downto 2.5mm MicroCables
BOP; modular cable in a sewage system• ‘No-dig’ solutions can save up to 50% of the network infrastructurecost• Existing systems using the sewage ROW are based on standardcable technique and mechanical ‘clamping’ devices for the cable• BOP is using the standard ‘epoxy liner technique’ for rehabilitationof the sewage pipes• The liner can be partially applied or over the entire circumferencepending local needs. The BOP module (set of microtubes in anouter sheath) is encapsulated by the liner.• A robot is used for pipes diameters between 700mm and 100mm
BOP; modular cable in a sewage systemProduct<strong>MicroBlo</strong> 2W 5mm (PE)-BOP<strong>MicroBlo</strong> 2W 10mm (PE)-BOP<strong>MicroBlo</strong> 4W 5mm (PE)-BOP<strong>MicroBlo</strong> 4W 10mm (PE)-BOPExternaldimensions13.10mm x 8.10mm(0.52 x 0.32 inches)22.10mm x 12.10mm(0.87 x 0.48 inches)23.10mm x 8.10mm(0.91 x 0.32 inches)42.10mm x 12.10mm(1.66 x 0.48 inches)Straigth lay, Polyester tape 100% coverage black polyurethanesheath
BOP: SYSTEM for Multiduct in SEWAGEThe module is place in pipes by robot in pipes from 700mm to a100mm pipesThe robot places and glues the module against the wall of thepipe
BOP: SYSTEM for Multiduct in SEWAGEThe polymérisation is done by thermo-contact with an inflatedbag and hot water in the module
BOP: SYSTEM for Multiduct in SEWAGEStainless steel boxes allow to store overlength of cable.These boxes also can contain the splice closures, it can bestandard plastic fosc closures or stainless steel Fist SCOclosures.
Brand-RexModular cable capabilities<strong>MicroBlo</strong> and BOPTypeAir BlownCableAir BlownMinicableAir BlownFiberbundlesAir BlownRibbonAir BlownFiberLocationAerialDirect BuriedBuriedSewageIndoorNew ductsExisting ducts
Tyco Telecom OSPcore fiber productsOSP Network Elements
Change language