PCI-CTR05 User's Guide

More documents

Recommendations

Info

PCI-CTR05 User's GuideInstalling the PCI-CTR0512012019371937Figure 2-3. C37FFS-x cableField wiring, signal termination and conditioningYou can use the following MCC screw terminal boards with the PCI-CTR05 board using the C37FF-x orC37FFS-x cable.• SCB37 — 37-conductor, shielded signal connection/screw terminal box that provides twoindependent 37-pin connections. Details on this product are available atwww.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=196&pf_id=1166.• CIO-MINI37 — 4 x 4, 37-pin screw terminal board. Details on this product are available atwww.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=102&pf_id=255.• CIO-MINI37-VERT — 37-pin screw terminal accessory with vertical 37-pin male D connector.Details on this product are available on our web site atwww.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=102&pf_id=256.• CIO-TERMINAL — 16 X 4 universal screw terminal board with on-board prototype area andcircuitry. Details on this product are available on our web site atwww.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=102&pf_id=282.2-5
Programming and software applicationsChapter 3Programming languagesMeasurement Computing’s Universal Library provides access to board functions from a variety ofWindows programming languages. If you are planning to write programs, or would like to run theexample programs for Visual Basic ® or any other language, please refer to the Universal Library User'sGuide (available on our web site at www.mccdaq.com/PDFmanuals/sm-ul-user-guide.pdf).Packaged application programsMany packaged application programs, such as SoftWIRE ® , Labtech Notebook, and HP-VEE, nowhave drivers for your board. If the package you own does not have drivers for your board, please fax or e-mail the package name and the revision number from the install disks. We will research the package foryou and advise how to obtain drivers.Some application drivers are included with the Universal Library package, but not with the applicationpackage. If you have purchased an application package directly from the software vendor, you may needto purchase our Universal Library and drivers. Please contact us by phone, fax or e-mail:• Phone: 508-946-5100 and follow the instructions for reaching Tech Support.• Fax: 508-946-9500 to the attention of Tech Support• Email: techsupport@measurementcomputing.comRegister-level programmingWe recommend that you use the Universal Library or one of the packaged application programsmentioned above for controlling your board. Only experienced programmers should attempt registerlevel-programming.If you must use register-level programming in your application, refer to the Register Map for the PCI-CTR05. This document is available on our web site at www.mccdaq.com/registermaps/RegMapPCI-CTR05.pdf.3-1
Page 2 and 3: PCI-CTR059513-Based Counter/TimerUs
Page 4 and 5: Trademark and Copyright Information
Page 6: About this User's GuidePrefaceWhat
Page 9 and 10: PCI-CTR05 User's GuideIntroducing t
Page 11 and 12: PCI-CTR05 User's GuideInstalling th
Page 13: PCI-CTR05 User's GuideInstalling th
Page 17 and 18: PCI-CTR05 User's GuideSpecification
Page 19 and 20: PCI-CTR05 User's GuideSpecification
Page 21: Measurement Computing Corporation16

PCI-CTR05 User's Guide

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?