Examination Items - Fibreboard - Engineered Wood Products ...

AWPA TEST CENTRE ASSOCIATION INC JIS Mark Procedure(1) Location: Inspection, testing, place of inspection or warehouse for final products,(2) Time of sampling: After the completion of product inspection.(3) Method of sampling: Random sampling(4) Sample size: To take required number of test specimen from representative products such as largestproduction and/or manufactured by most stringent quality requirements.7.2 Test item/ test methodsTest items and test methods shall be in accordance to the relevant JIS product standard8 Marking of ProductEach pack of MDF shall have a unique pack number for purposes of identification. An instruction todescribe the labelling system should be available. All packs will be labelled with the followinginformation as a minimum:Product TypeProduct SizeProduct ThicknessBoards per PackDate of ManufacturePack No.Safety and Handling InstructionsManufacturers Name and AddressPreferably, on products > 10 mm thickness, the edge of each board should be ink jet marked with productidentification information. JIS marks appropriate to the product may be applied as described in the JISMark Rules manual.9 Traceability of lotsThe applicant must document and maintain a system of traceability of JIS Mark production lots.10. Classification of certificationClassification of certification must be in accordance with the registered accreditation body’s rules.Doc No 101 Rev. No. 2 Issued 01/12 Page 4 of 19