TECHNICAL SPECIFICATIONS - ETI, S.A.

Ballast Core & CoilHPS MH 70W 1237-3 230V 50HzEd. 204/10/10TECHNICAL SPECIFICATIONSBALLAST TYPE: HPS-MH 70 1237-3FINISHING: Core and coilAPPLICATION: HPS 70W / 1A and MH 70W / 1A lamps.1. Electrical dataLine voltage (Un +/- 10%) V 230Line frequency Hz 50Ballast-Lamp Power factor P.F 0,38Lamp current at Un A 1,00Maximum starting current at 106% Un A 1,9Line starting current in low power factor units A 1,5Line starting current in high power factor units A 0,7Steady state line current in high power factor units A 0,4Power losses (maximum) W 14Power factor correction capacitor F 12Coil resistance 8,85Energy Efficiency Index - EEI=A3Electrical Insulation classification - Class 12. Thermal dataTemperature increment (t) ºC 70Maximum winding temperature (t w ) ºC 1303. Compatible ignitors22CV (Only HPS), R-23CV (Only HPS), MR-22V, RL-23VHT-23MRi-22 plusMRi-23C plusImpulse typeTimed impulse typeIndependent typeTimed Independent type4. Mechanical dataDimensions (length x width x height)Standard case100 x 75 x 62mmShort case 67 x 75 x 62Distance between fixing pointsStandard case92 x 56mmShort case 57 x 59Approximate weight Kg 1,4Maximum connection wires section mm 2 2,5Average lifetime Years 10Protection index IP 00

Ballast Core & CoilHPS MH 70W 1237-3 230V 50HzEd. 204/10/105. Manufacture materialsCoreFeV 400-50HACoil base Polyamide with F.G. 30%Wire insulation Class 200ºCImpregnation compound Epoxy resin class 180ºC6. Waste disposal / Environment normativesRAEEWEEERoHSREACHExempted productExempted productCompliantCompliant7. Energy efficiencyRD 1890/2008 ITC-EA-04, EUP 20128. Standards / ApprovalsEN 60922, EN 60923 / ENEC-01, AENOR, CE9. Wiring diagramCopyright ETI,S.A. 2012